Está en la página 1de 23

(.

;QMMAND DESCRIPTlON HGSUJ-1


21 90 82-CNT 238 0034 Uen B 1 1995-09-.21

Format

1.1

Command

1ALL}

MSISDN=msisdn ...
HGSDP: IMSisimsi.. .
, :::: ;
{
CONNECTED
LOC

1.2

Parameters
All subscriber data
CONNECTED

Request ed data or all connected


subscribers .

IMSI=imsi

Inter na tional Mobile Subscriber


Identity
See Appl i c ation Information for
block HTRAN .

LOC

Subscriber location data

MSISDN=msis dn

Mobile Station International


PSTN/ISDN Number
See

Applica~ion

Information for

block HTRAN .

SSDA

Permane nt sub scriber data and the


supplementary service data (that
is supplementary service re lated
data).

SUDA

Permanent subscriber data (that


is data only changeable by the
operator) .

Function
Command HGSDP initiates printouts according to t h is table:
Parameter

ALL

Printouts
HLR SUBSCRIBER DATA.
PERMANENT SUBSCRIBER DATA .
SUPPLEMENTARY SERVICE DATA.
LOCATION DATA.

SUDA

HLR SUBSCRIBER DATA.


PERMANENT SUBSCRIBER DATA .

SSDA

HLR SOBSCRIBER DATA.


PERMANENT SUBSCRIBER DATA .
SUPPLEMENTARY SERVICE DAT .

LOC

HLR SUBSCRIBER DATA.


LOCATION DATA.

COMMAND DESCRIPTION HGSDP


21'190 82-CNT 238 0034 Uen 81 1995-09-.21

This comrnand can be initiated from up to 16 IO devices


simultaneously.

COMMAND DESCRIPTION HGSUP

31190 82-CNl 238 0037 Uen A1

Format

1.1

Command

IMSI=imsi ...

1995-09-21

HGSUP: MSISDN=msisdn ... ;


{
CONNECTED

1.2

Parameters
CONNECTED

All mobile subscribers connected

IMS:I=imsi

International Mobile Subscriber


Identity
See Application Information for
block HTRAN .

MSISDN=msisdn

Mobile Station International


PSTN/ISDN Number
See Application Information for
block HTRAN.

Function
Command HGSUP initiates the printout HLR SOBSCRIPTION DATA .
This command can be initiated from up to sixteen !O devices
simultaneously.
The order does not remain after system restart.

t,;OMMANO DESCRIPTION HGSUE


2/190 82-CNT 238 0037 Uen B 1 1995-09-21

Format

1.1

Command
HGSUE:MSISDN=msisdn;

1.2

Parameters
MSISDN=msisdn

Mobile Stati on International


PSTN /ISDN Number
See Application Information for
block HTRAN .

Function
Command HGSUE ends the subscription of a mobile subscriber.
This command can be initiated from up to 16 IO devices
simultaneously .
The arder remains after system restart.

COMMAND DESCRIPTION HGSUI


1/190 82-CNT 238 0037 Uen 82 1995-09-Ll

Format

1.1

Command
HGSUI:IMSI=irnsi,MSISDN=rnsisdn[,PROFILE=profile];

1.2

Parameters
IMSI=imsi

International Mobile Subscriber


Identity
See Application Inforrnation for
block HTRAN .

MSISDN=msisdn

Mobile Station International


PSTN/ISDN Ntunber
See Application Inforrnation for
block HTRAN .

l?ROFILE=profila

Subscriber profile
Numeral O - 255

Function
Command HGSOI initiates the subscription of a new rnobile
subscriber in the HLR.
At subscription, a set of subscriber data is given to the
subscriber by means of a profile.
If no profile is given in the cornrnand, profile O will be
used as default.
The location of the new rnobile subscriber is set to unknown.
This cornrnand also initiates a request for authentication
data frorn an external authentication centre.
An

exchange parameter determines whether the comm.a nd wai ts

for the result of the authentication data request or not.


The fault cedes relating to authentication data only apply
when this parameter is set.
This command can be initiated frorn up to 16 IO devices
s imul taneous 1 y.
The order remains after systern restart.

GOMMAND DESCRIPTION HGSOC


1/190 82-CNT 238 0034 Uen 82 1995-09-21

Format

1.1

Command

HGSDC:MSISDN=msisdn,

1.2

SUD=sud

{ PROFILE=profile

Parameters
MSISDN=msisdn

Mobile Station International


PSTN/ISDN Number.
See Application Information for
block HTRAN.

PROFILE=profile

Subscriber profile
Nwneral O - 255
SUDsud

Subscriber data
Expressed as a-b where:
a

is an identifier

is a numeral 0-65535.
See Application Information for

block HTRAN.

Function
Command HGSDC changes subscriber data, specifying data
to be changed (SUD), ora set of data previously defined
(PROE'ILE).
Provision of a supplementary service already provided,
will cause the supplementary service to be deactivated
and erased.
Subscription to an already subscribed Basic Service will
not cause any change in the corresponding Supplementary
Services data unless it is got by means of a profile.
When a new Basic Service is subscribed and the corresponding
Basic Service Group has not previously got any basic service
subscribed to, the provision status of the supplementary
services will be inherited.
The activation/registration status will be inherited only
for those supplementary services that are activated as a

cOMMAND DESCRIPTION HGSDL


11190 62-CNT 238 0034 Uen 82 i995-09-2t

When a new Basic Service is subscribed and the corresponding


Basic Service Group has previously got any basic service
.subscribed t0, r::he provision and activat1ontreg1st.ration
status of all the supplementary se.rvj~es will h~ inha~i~Prl
from the previously subscribed basic sen ices.
This command can be initiated from up to 16 IO devices
simul taneously.
The arder rernains after system restart.

.
APPLICATION INFORMATION HTRAN
2115518-CNT 238 0047 Uen L 1996-12-11

Data

2.1

Subscriber Data
Command
Parameter

Value
Range

IMSI

6C-15C

International Mobile Subscriber


Identity
Contains decimal digits.

NIMSI

6C-15C

New IMSI number


Contains decimal digits.

MSISDN

5C-15C

Mobile Station International PSTN


ISDN number
contains decimal digits.

AMSISDN

5C-15C

Additional MSISDN
Contains decimal digits.

SS

2C-6C

Supplementary Service identifier


Consists of a string
(see table 1).

Description

SUD

Se e
Subscriber Data
description Expressed as a-b where:
a Identifier
2 - 6 characters.
b Numeral
o - 65535.
(see table 2)

BS

2C-6C

Basic Service identifier


Consists of a string
(se e table 3)

BSG

2C-6C

Bas i c Service Group


identifier
Consists of a string
(se e table 4)

CHAR

3C-8C

Roaming area characteristic


identifier
Consists of a string
(see table 5)

Table 1: Supplementary Service (SS) identifiers


String

Meaning

Action

ALLSS
BAC
BAIC
BAOC
BIC
BICRO

ALL SUPPLEMENTARY SERVICES


ALL CALL RESTRICTION SERVICES
BARRING OF ALL INCOMING CALLS
BARRING OF ALL OUTGOING CALLS
BARRING OF INCOMING CALLS
BARRING OF ALL INCOMING CALLS WHEN
ROAMING OUTSIDE THE HOME PLMN COUNTRY
BARRING OF OUTGOING CALLS
BARRING OF ALL OUTGOING INTERNATIONAL CALLS
BARRING OF ALL OUTGOING INTERNATIONAL CALLS
EXCEPT THOSE DIRECTED TO THE HOME PLMN COUNTRY
CALL WAITING
ALL CONDITIONAL FORWARDING SERVICES
CALL FORWARDING ON MOBILE SUBSCRIBER BUSY
CALL FORWARDING ON MOBILE SUBSCRIBER NOT REACHABLE
CALL FORWARDING ON NO REPLY
ALL FORWARDING SERVICES

BOC
BOIC
BOIEXH
CAW
CCFS
CFB
CFNRC
CFNRY
CFS

A/0/P
A/0/P

o
A/0/P
O

A/0/P
A/D/P
A/D/P
R/A!E/D
R/A/E/0/P
R/A/E/0/P
R/A/E/0/P
R/A/E/0

APPLICATION INFORMATION HTRAN


2/15518-CNT 238 0047 Uen L 1996-12-11

crs
CFU
DCF
SI?N

ALL FORWARDING SERVICES


CALL FORWARDING UNCONDITIONAL
DEFAULT CALL FORWARDING
SI NGLE PERSONAL NUMBER

R/A/E/0
R/A/E/0/P
R/E/P
R/E/P

P = This .st r i ng c :~.n be .ls ed. in the cornmanr:t HGSSI t;<)


registe r a Stipplementary Service .
A
This string can be used in the command HGSSI to
activate a Supplementary Service.
E
This string can be used in the command HGSSE to
erase a Supplementary Service.
D
This string can be used in the cornmand HGSSE to
deactivate a Supplementary Service.
P
This string can appear in the printout ini tiated
by command HGSDP (SUPPLEMETARY SERVICE DATA ) .

The Supplementary Services AOC, CLIP, CLIR, COLP, COLR, CUG, HOLD, ICI, MPTY,
OIN, TI N, OICK and TICK cannot be used asan argument of command parameter SS.
They are used as an argument of command parameter SUD except for CUG (see table 2).
When a certain Supplementary Service is not supported by the system the corresponding
string will not be recognized by it.
SSs are only printed (Printout SUPPLEMENTARY SERVICE DATA) if the Supplementary
Service has been provided.
Table 2: Subscriber Data (SUD)
String

Meaning

AOC

ADVICE OF CHARGE

Value
Range

Action

0-2

L/P/S/0

0-1

L/P/S/0

0-1

L/P/S/0

0-1

L/1?/S/0

0-1

L/P/S/0

0-1

L/P/S/D

O - Advice of charge not provided


Advice of charge information
provided
2 = Advice of charge charging
provided
BARRING OF ALL INCOMING CALLS
O - not provided
1 .. provided
BARRING OF ALL OUTGOING CALLS
O - not provided
1 =- provided
BARRING OF ALL INCOMING CALLS WHEN ROAMING
OOTSIDE THE HOME I?LMN COUNTRY
O not provided
1 provided
BARRING OF ALL OUTGOING INTERNATIONAL CALLS
O not provided
l .. provided
BARRING OF ALL OOTGOING INTERNATIONAL CALLS
EXCEPT THOSE DIRECTED TO THE HOME PLMN
COUNTRY
O .. not provided
1 provided
1

BAIC
BAOC
BICRO

BOIC
BOIEXH

This string can be used in the command HGLIP


to print conditional list printout, and can
appear in its printout
(HLR CONDITIONAL SUBSCRIBER LIST) .
p .. This string can be used in the command HGSPC
to change profile data, and can also appear
in the printout initiated by command HGSPP
(HLR SUBSCRIBER PROFILE DATA) .
S
This s tring can be used in the command HGSOC
to change Subscribe r Data.
o = This string can appear in the printout initiated
by c ommand HGSDP (PERMANENT SUBSCRIBER DATA).

Table 2 (contin . ) : Subscr i ber Da t a (SUD)


String

Mea ning

Value

Ac tion

API-'Ltl.AliON INF-ORMA f liJN Hl RAN


21155 18-CNT 2.38 01.)47 Uen L '1996- LH 1

Range
BS21

BS22

BS23

BS24

BS25

BS26

BEARER SERVICE "DATA CIRCUIT


A3tNCl1RONOUS :j!JO b/s"
o e not sub!lcribed
1 = subscribed
SEARER SERVICE "DATA CIRCO l 'I'
ASYNCHRONOUS 1200 b/s"
O = not subscribed
1 "' subscribed
BEARER SERVICE "DATA CIRCOIT
ASYNCHRONOUS 1200-75 b/s "
O - not subscribed
1 - subscribed
BEARER SERVICE "DATA CIRCUIT
ASYNCHRONOUS 2400 b/s "
O ~ not subscribed
1 :z subscribed
BEARER SERVICE " DATA CIRCUIT
ASYNCHRONOOS 4800 b/s "
O = not subscribed
1 = subscribed
BEARER SERVICE " DATA CIRCOIT
ASYNCHRONOUS 9600 b/s "
O ~ not subscribed
1 = subscribed

0-1

L/P/S/0

0-l

L/P/S/D

0-1

L/P/S/D

0-1

L/P/S/D

0-1

L/P/S/D

0-1

L/P/S/0

This string can be used in the command HGLIP


to print conditional list printout, and
can appear in its printout
(HLR CONDITIONAL SOBSCRIBER LIST).
P
This string can be used in the command HGSPC
to cbange profile data, and can also appear
in the printout initiated by command HGSPP
(HLR SOBSCRIBER PROFILE DATA) .
S = This string can be used in the command HGSDC
to change Subscriber Data.
O ~ This string can appear in the printout initiated
by command HGSDP (PERMANENT SUBSCRIBER DATA).

Table 2 (contin.): Subscriber Data (SUD)


String

Meaning

Value
Range

Action

BS31

BEARER SERVICE "DATA CIRCUIT


SYNCHRONOUS 1200 b/s"
O - not subscribed
1 - subscribed
BEARER SERVICE "DATA CIRCUIT
SYNCHRONOUS 2400 b/s "
O = not subscribed
1 "' subscribed
BEARER SERVICE "DATA CIRCUIT
SYNCHRONOUS 4800 b/s "
o a not subscribed
1 = subscribed
BEARER SERVICE " DATA CIRCUIT
SYNCHRONOUS 9600 b/s "
O not subscribed
1 = subscribed
CRANNEL ALLOCATION PRIORITY LEVEL
O = no priority leve! assigned
1-14 = priority level
(highest priority 1evel = 1)
(lowest priority level = 14)
15 = priority level not used

0-1

L/P/S/0

0-1

L/P/S/D

0-1

L/P/S/0

0-1

L/P/S/D

0-15

L/P/S/D

BS32

6533

BS34

CAPL

This string can be used in the command HGLIP


to print conditional list printout, and can
appear in its printout
(HLR CONDITIONAL SUBSCRIBER LIST) .
This string can be used in the command HGSPC

APPLICA llON INFURMATION HTRAN


2/155 18-Cf\!T 238 0047 U en L 199tl-1 :l-1"1

This str~ng can be used in the command HGSPC


to change profile data, and can also appear
in the printout initiated by command HGSPP
{HLR SUBSCRIBER PROFILE DATA) .
'I'!ns s t: :t: ing' can be usEOd ln thE. C)ll1I'Cland HGSDC
to change Subscriber Data.
This string ~an appear in the printout initiated hy
command HGSDP IPERMANENT SUBSCRIBER DATA).

Table 2 (contin.): Subscriber Data (SUD)


String

Meaning

Value
Range

Action

CAT

SUBSCRIBER CATEGORY
O
Calling party is unknown at
this time
1
Operator, language French
2
Operator, language English
3 Operator, language German
4 a Operator, language Russian
5
Operator, language Spanish
6
Available to administrations for
selecting a particular language
by mutual agreement
7 Available to administrations for
selecting a particular language
by mutual agreernent
8 - Available to administrations for
selecting a particular language
by mutual agreernent
9 - Reserved
10 - Ordinary calling subscriber
11 a Calling subscriber with priority
12 - Data ca11 (volee band data)
13 Test call
14 - Not used
_ 15
Payphone
46
1
22 3 = Not used
224-54 a National use
255 - Not used
CALL WAITING
O not provided
1 ., provided
CALL FORWARDING ON MOBILE SUBSCRIBER BUSY
O not provided
1 provided

0-255

L/P/S/D

0-1

L/P/S/D

0-1

L/P/S/0

CAW
CFB

S
D

This string can be used in the comrnand HGLIP


to print conditional list printout , and can
appear in its printout
(HLR CONDITIONAL SUBSCRIBER LIST) .
This string can be used in the comrnand HGSPC
to change profile data, and can also appear
in the printout initiated by cornrnand HGSPP
(HLR SUBSCRIBER PROFILE DATA) .
This string can be used in the command HGSDC
to change Subscriber Data.
This string can appear in the printout initiated
by command HGSDP (PERMANENT SOBSCRIBER DATA).

Table 2 (contin.): Subscriber Data (SUD)


String

Meaning

Value
Range

Action

CFNRC

CALL FORWARDING ON MOBILE SUBSCRIBER NOT


REACHABLE
O .. nat provided
1 = provided
CALL FORWARDING ON NO REPLY
O "' not provided
1 .. provided

0-1

L/P/S/D

0-1

L/P/S/D

CFNRY

APPLICATION INFORMATION HTRAN


2/155 18-CNT 238 0047 Uen L 1996-12-11
CFU

CLIR
COLP
COLR
CUG
D85G

CALL FORWARDING UNCONDITIONAL


0-1
L/P/5/D
O = not provided
1 = provided
r:'Jl. !.,U:"NG t.INE IDE.NTIFICAT!'iN PBESEt-ITA'~'ION
0-1
L/P/S/f:o
O = not provided
1 = provided
CALLING LINE IDENTIFICATION RE5TRICTION
0-1
L/P/S/D
O = not ptovided
1 = provided
CONNECTED LINE IDENTIFICATION PRE5ENTATION
0-1
L/P/5/D
O = not provided
1 = provided
CONNECTED LINE IDENTIFICATION RE5TRICTION
0-1
L/P/5/D
O "" not provided
1 = provided
CL05ED U5ER GROOP
0-1
L/0
O = not provided
1 = provided
DEFAULT BA5IC 5ERVICE GROUP
1-6
L/P/5/D
1 = Al1 5peech Transmission 5ervices (T510)
2 = Not used.
3 = All Facsimi1e Transmission Services (TS60)
4 = Not used.
S = Al1 Data Circuit Asynchronous 5ervices (8520)
6 = All Data Circuit Synchronous 5ervices (8530)
L

S O

This string can be used in the co.mmand HGLIP


to print conditional 1ist printout, and
can appear in its printout
(HLR CONDITIONAL 5UBSCRIBER LI5T).
This string can be used in the command HGSPC
to changa profile data, and can also appear
in the printout initiated by command HGSPP
(HLR SOBSCRIBER PROFILE DATA).
This string can be used in the command HGSDC
to change Subscriber Data.
This string can appear in the printout
initiated by command HGSDP
(PERMANENT SOBSCRIBER DATA).

Table 2 (contin.): Subscriber Data (SOD)


String

Meaning

Value
Ranga

Action

DCF

DEFAOLT CALL FORWARDING


O = not registered
1 = registered
CALL ROLO
O = not provided
1 = provided
IMMEDIATE CALL ITEMIZATION
O = not provided
1 = provided
MULTIPARTY SERVICE
O = not provided
1 = provided
OPERATOR DETERMINED BARRING OF ALL INCOMING
ANO OUTGOING CALLS
O = No operator barring of any call,
active
(in this case the va1ue of 08!
as well as OBO must be set to 0)
1
Operator barring of al1 calls,
active
(in this case the value of OBI
as we11 as 080 must be set to 1)
OPERATOR DETERMINED BARRING OF ALL INCOMING
CALLS
not active
O
1
Operator determinad barring of
all incoming cal1s, active
2
Operator determinad barring of

0-1

0-1

L/P/S/0

0-1

L/P/S/0

0-1

L/P/S/0

0-1

0-2

L/P/S/0

HOLD
ICI
MPTY
OBA

OBI

..

APPLICATION INFORMATION HTRAN


21155 18-CNT 238 0047 Uen L 1996-12-11

all inceming calls when reaming


eutside heme PLMN ceuntry, active
L

This string can be used in the cemmand HGLIP


te print cenditienal list printeut, and can
appear in its printout
(HLR CONDITIONAL SUBSCRIBER LIST) .
This string can be used in the cemmand HGSPC
te change prefile data, and can alse appear
in the printeut initiated by cernmand HGSPP
(HLR SUBSCRIBER PROFILE DATA).
This string can be used in the cemmand HGSDC
te change Subscriber Data.
This string can appear in the printeut initiated
by cemmand HGSDP (PERMAN~NT SUBSCRIBER DATA}.

Table 2 (centin.): Subscriber Data (SUD)


String

Meaning

Value
Range

Actien

080

OPERATOR DETERMlNED BARRING OF ALL OUTGOING


CALLS
O .. net active
1
Operater determined barring ef
all eutgeing calls, active
2 - Operater determinad barring ef
all eutgeing internat~enal
calls, active
3 Operater determinad barring ef
all eutgeing internatienal
calls except fer these directed
te heme PLMN ceuntry, active
4 - Operater determinad barring ef
all outgeing calls when roaming
outside home PLMN ceuntry, active
OfitRATOR DETERMINED BARRING OF OUTGOING
PREMIUM RATE CALLS (ENTERTAINMENT)
O net active
1 = active
OPERATOR DETERMINED BARRING OF OUTGOING
PREMIUM RATE CALLS (INFORMATION)
O .. net active
1 - active
OPERATOR DETERMINED BARRING OF
SUPPLEMENTARY SERVICES MANAGEMENT
O net active
1 active
WHEN REGISTERED IN THE HPLMN,
OPERATOR SPECIFIC BARRING (TYPE 1)
O - net active
1 = active

0-4

L/P/5/D

0-1

L/P/S/D

0-1

L/P/S/D

0-1

L/P/S/D

0-1

L/P/S/D

OBOPRE

OBOPRI

OBSSM

0581

This string can be used in the cemmand HGLIP te


print conditienal list printeut, and can appear in
its printeut (HLR CONDITIONAL SUBSCRIBER LIST) .
P
This string can be used in the cemmand HGSPC to
change prefile data, and can alse appear in the
printeut initiated by cemmand HGSPP
(RLR SUBSCRIBER PROFILE DATA} .
S
This string can be used in the cemmand HGSDC te
change Subscriber Data .
O = This string can appear in the printeut initiated
by command HGSD (PERMANENT SUBSCRIBER DATA).

Table 2 (centin.): Subscriber Data (SUD)


String

Meaning

Value
Range

Actien

OSB2

WHEN REGISTERED IN THE HPLMN,


OPERATOR SPECIFIC BARRING (TYPE 2)

0-1

L/P/5/D

APPLICATJON INFORMATION HTRAN


:U15518-t.;N1 238 0047 Uen L 1996-12-11

OSB3

OSB4

OBR

OFA
OICK

O = not active
1 = active
WHEN REGISTERED IN THE HPLMN,
0-1
vPERATOR SPECIFIC BARRING CTYPE :
O = not active
1 = active
WHEN REGISTERED IN THE liPLMN ,
O 1
OPERATOR SPECIFIC BARRING (TYPE 4)
O = not active
1 = active
OPERATOR DETERMINED BARRING OF ROAMING
0-2
O = not active
1 = Operator determinad barring when
roaming outside home PLMN, active
2
Operator dete~ined barring when
roaming out~ide horne PLMN country
active
ORIGIN FOR FORWARDED-TO NUMBER ANALYSIS
0-511
O = Used for international numbers
1-511 = Used for national numbers
ORIGINATING INTELLIGENT NETWORK
0-999
CATEGORY KEY
O = not provided
1-999 = provided

L/P/S/0

L/P/S/0

L/P/S/0

L/P/S/0
L/P/S/0

This string can be used in the comrnand HGLIP to


print conditional list printout, and can appear
in its printout {HLR CONDITIONAL SUBSCRIBER LIST).
P - This string can be used in the command HGSPC to
change profi1e data, and can also appear in the
printout initiated by cornmand HGSPP
{HLR SUBSCRIBER PROFILE DATA) .
S
This string can be used in the comrnand HGSDC to
change Subscriber Data .
O This s.tring can appear in the printout initiated .
by command HGSDP {PERMANENT SUBSCRIBER DATA).

Table 2

(co~in.):

Subscriber Data {SUD)

String

Meaning

Va1ue
Range

Action

OIN

ORIGINATING INTELLIGENT NETWORK


O = not provided
1 .. provided
PRIMARY INTER-EXCHANGE CARRIER IDENTIFIER
O no prirnary inter-exchange
carrier assigned
1-255 = primary inter-exchange carrier
identifier
SOBSCRIBER PASSWORD

0-1

L/P/S/0

0-255

L/P/S/0

0-9999

L/S/D

REGIONAL SERVICES
O = not provided
1-16383 = zone code set nurnber
SOBSCRIPTION OPTION CONTROL OF BARRING
SERVICES
o by the operator
by the operator and the rnobile
1
subscriber (using password)
2 = only operator due to unsupported
services (see note 1)
3
only operator due to password
blocked (see note 2)

0-16383

L/S/D

0-1
0-3

L/P/S

PICI

PWD
REGSER
SOCB

L This string can be used in the cornrnand HGLIP


to print conditional list printout, and can
appear in its printout
(HLR CONDITIONAL SUBSCRIBER LIST) .
P e This string can be used in the command HGSPC
to change profile data, and can also appear
in the printout initiated by command HGSPP
(HLR SUBSCRIBER PROFILE DATA) .

APPLICATION INFORMATION HTRAN


2/1 55 18-CNT 238 004 7 Uen L 1996-12-1 1

This string can be used i n the command HGSDC


to change Subscriber Data .
This string can appear in the printout initiated
b:r cornmand HGSD!? 'PERM.U.NENT SOBSCPISER DATA} .
This value may be set automatically when the subscriber is located
in a MSCNLR which does not support a service. The previous value
is recovered when the cause which provokes it is ended.

S
D

This value may be set automatically when the password is blocked


by the subscriber. The previous value is recovered when the
password is unblocked by the operator

Table 2 (contin.): Subsc rib er Data (SUD)


String

Me aning

Value
Range

Action

SOCFB

SUBSCRIPTION OPTI ON CALL FORWARDING


ON MOBILE SOBSCRIBER BUSY
O = No notification to calling nor
to served subscribe r s when the
call i s forwarde d
1 Only calling subscriber is
notifi ed when the c a ll is
forwarded
2 ~ Only served subscriber is
notified when the call is
forwa rded
3 Both , calling and served
subscr ibers are notified when
the ca l l is forwarded
SUBSCRIPTION OPTION CALL FORWARDING
ON MOBILE SUBSCRIBER NOT REACHABLE
O - No notification to calling
subscriber
when the call is forwarded
1 - Notification to calling
subscr iber when the call is
forwarded
SUBSCRIPTION OPTION CALL FORWARDING
ON NO REPLY
O = No notification to calling nor
to served subscribers when the
call is forwarded
1 - Only calling subscriber is
notified when the call is
forwarded
2
Only served subscriber is
not i fied when the call is
forwarded
3
Both , calling and served
subscribers are notified when
the call is forwarded

0-3

L/P/S/D

0- 1

1/P/S/D

0-3

L/P/S/D

SOCFRC

SOCFRY

This string can be used in the command


HGLIP to print conditional list printout,
and can appear in its pr i ntout
(HLR CONDITIONAL SUBSCRIBER LIST) .
P = This string can be used in the command
HGSPC to change profile data, and can
also appear in the printout initiated
by command HGSPP (HLR SUBSCRIBER PROFILE DATA ) .
S
Th i s string can be used in the command
AGSDC to change Subscriber Data.
O
This string can appear in the pr i ntout
initiated by command HGSDP (PERMANENT SUBSCRIBER DATA)
=

Table 2 (contin.): Subscriber Data (SUD)

APPLICATION INFORMATION HTRAN


21155 18-CNT 238 0047 Uen L 1996-12-11

String

Meaning

SOCFU

SUBSCRIPTION OPTION CALL FORWARDING


0 -1
UNCONDI'T'JONAL
O - No notification to calling
subscriber
when the call is forwarded
1 ~ Notification to calling subscriber
when the call is forwarded
SUBSCRIPTION OPTION CALLING LINE
0-1
IDENTIFICATION PRESENTATION
, O without override category
1 with override category
SUBSCRIPTION OPTION CALLING LINE
0-2
IDENTIFICATION RESTRICTION
O ~ perma nent mode
1 = temporary mode, presentation
restricted
2 = temporary mode, presentation
allowed
SOBSCRIPTION OPTION CONNECTED LINE
0-1
IDENTIFICATION PRESENTATION
O - without override category
1 with override category
SUBSCRIPTION OPTION FOR NOTIFICATION
0-3
OF DEFAULT CALL FORWARDING
O - No notification to calling
nor to served subscribers when
the call is forwarded
1 Notification to calling subscriber
when the call is forwarded
2
Notification to served subscriber
when the call is forwarded
3 = Notification to both , calling and served
subscribers when the call is forwarded

SOCLIP

SOCLIR

SOCOLP

SODCF

Value
Range

Action

L /P/S/0

L/P/S/D

L/P/S/0

L/P/S/D

L/P/S/0

L - This string can be used in the command HGLIP to print


conditional list printout, and can appear in its
printout (HLR CONDITIONAL SUBSCRIBER LIST) .
P = This string can be used in the command HGSPC to change
profile data, and can also appear in the printout
initiated by command HGSPP (HLR SUBSCRIBER PROFILE DATA) .
S = This string can be used in the command HGSDC to change
Subscriber Data.
O
This string can appear in the printout initiated by
command HGSDP (PERMANENT SUBSCRIBER DATA).
Table 2 (contin.): Subscriber Data (SUD)
String

Meaning

Value
Range

Action

SOSDCF

SUBSCRIPTION OPTION FOR SPECIFICATION OF


FORWARDING CONDITIONS FOR DCF SUPPLEMENT~~y
SERVICE
1
When the called mobile
subscriber is busy
2 = When the called mobile
subscriber does not reply
When the called mobile
3
subscriber is busy and does
not reply
When the called mobile
4
subscriber is not reachable
When the called mobile
5
subscriber is busy and not
reachable
6 = When the called mobile
subscriber is not reachable
and does not reply

1-7

L/P/S/0

APPLICATION INFORMAfiON HTRAN


2/155 18-CNT 238 004., Uen L 1996-12-11
7

SPt'

STYPE.
TIN
TICK

10

When the cal1ed mobile


subscriber is busy, not
reachable and does not rep1y
~:!:~G!.F: PSRSONAL NUMBE?
O not registered
1 = reg1stered
SUBSCRIPTION TYPE
O = not provided
1-127 provided
TERMINATING INTELLIGENT NETWORK
O - not provided
1 .. provided
TERMINATING INTELLIGENT NETWORK
CATEGORY KEY
O = not provided
1-999 ~ provided
L
P
S
D

(l-1

0-121

L/ PIS/U

0-1

L/P/S/D

0-999

L/P/S/D

This string can be used in the command HGLIP to print


conditional list printout, and can appear in its
printout (HLR CONDITIONAL SUBSCRIBER LIST) .
This string can be used in the cornmand HGSPC to change
profile data, and can also appear in the printout
initiated by command HGSPP (HLR SUBSCRIBER PROFILE DATA) .
This string can be used in the command HGSDC to change
Subscriber Data.
This string can appear in the printout initiated by
cornmand HGSDP (PERMANENT SUBSCRIBER DATA).

Table 2 (contin.): Subscriber Data (SUD)


String

Meaning

Value
Range

Action

TSll

TELESERVICE "TELEPHONY"
O - not subscribed
1 - subscribed
TELESERVICE "SHORT MESSAGE MT/PP"
O = not subscribed
1 = subscribed
TELESERVICE "SHORT MESSAGE MO/PP"
O not subscribed
1 .. subscribed
TELESERVICE "ALTERNATE SI?EECH ANO FACSIMILE
GROUP 3"
O not subscribed
1 - subscribed
TELESERVICE "AUTOMATIC FACSIMILE GROOP 3"
o e not subscribed
1 = subscribed
TELESERVICE "AUXILIARY TELEPHONY"
O = not subscribed
1 = subscribed

0-1

L/P/S/0

0-1

L/P/S/0

0-1

L/P/S/0

0-1

L/P/S/D

0-1

L/P/S/D

0-1

L/D

TS21
TS22
TS61

TS62
TSD1

This string can be used in the cornmand HGLIP to print


conditional list printout, and can appear in its
printout (HLR CONDITIONAL SUBSCRIBER LIST).
P
This string can be used in the command HGSPC to change
profile data, and can also appear in the printout
initiated by cornmand HGSPI? (HLR SUBSCRIBER I?ROFILE DATA).
S = This string can be used in the comrnand HGSDC to change
Subscriber Data.
D = This string can appear in the printout initiated by
command HGSDP (PERMANENT SOBSCRIBER DATA).

When a certain Subscriber Data is not supported by the system the corresponding string
will not be recognized by it.
SUDs for Basic Services, Supplementary Services, Operator Determined Barring,
Regional Services, Channel Allocation Priority Level, Primary lnter-Exchange Carrier
ldentifier and Subscription Type are only printed (Printouts HLR SUBSCRIBER PROFILE

APPLICATION INFORMATION HTRAN


21155 18-CNT 238 0047 U en L 1996-12-11

11

DATA and PERMANENT SUBSCRIBER DATA) ifthe value for these SUDs is different
from O.
Subscription options for Supplementary Services are only printed (Printouts HLR
SUBSCRIBER PROFILE DATA and PERMANENT SUBSCRIBER DATA) if the
Supplementary Service has been provided.
When the SS is not provided, although the change of the relatad subscription option is
accepted by commands HGSDC and HGSPC, the new value will not be relevant until the
service is provided.
Table 3: Basic 5ervice (BS) identifiers
5tring
Meaning
8521
8522
8523
8524
8525
8526
8531
8532
8533
8534
TSll
T521
TS22
T561
T562
T5D1

BEARER 5ERVICE "DATA CIRCUIT ASYNCHRONOUS 300 b/s "


BEARER 5ERVICE "DATA CIRCUIT A5YNCHRON005 1200 b/s "
BEARER SERVICE "DATA CIRCOIT ASYNCHRONOUS 1200-75 b/s"
BEARER SERVICE "DATA CIRCUIT ASYNCHRONOOS 2400 b/s "
BEARER 5ERVICE "DATA CIRCOIT ASYNCRRONOU5 4800 b/s"
BEARER SER VICE "DATA CIRCUIT ASYNCHRONOUS 9600 b/s"
BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 1200 b/s"
BEARER SERVICE " DATA CIRCUIT 5YNCHRONOU5 2400 b/s"
BEARER SERVICE " DATA CIRCUIT SYNCHRONOOS 4800 b/s "
BEARER 5ERVICE "DATA CIRCUIT 5YNCHRONOU5 9600 b/s "
TELE5ERVICE "TELEPHONY"
TELE5ERVICE "5HORT MES5AGE MT/PP"
TELE5ERVICE "SHORT MESSAGE MO/PP "
TELE5ERVICE "ALTERNATE SPEECH ANO FACSIMILE GROOP 3"
TELE5ERVICE "AUTOMATIC FACSIMILE GROUP 3"
TELE5ERVICE "AUXILIARY TELEPHONY"
P

Action
P/0
P/0
P/D
P/D
P/0
P/D
P/D
P/D
P/D
P/D
P/D
PID
P/D
P/D
P/D
P/D

= This

string can be used in the cornmand .


HGBDP, to print the bearer capability
data, and can appear in its printout
(HLR G5M-BEARER CAPABILITY DATA) .
D This string can appear in the printout
initiated by command HGSDP
(PERMANENT 5UB5CRI8ER DATA).
When a certain Basic Service (Bearer Service!Teleservice) is not supported by the system
the corresponding string will not be recognized by it.

BSs are only printed (Printout PERMANENT SUBSCRIBER DATA) if the Basic Service
(Bearer Service/Teleservice) is subscribed.
Table 4: Basic 5ervice Group (8SG) identifiers
5tring

Meaning

Action

ALLA5
ALL8E5
ALLDCA
ALLDC5
ALLDT5
ALL5YS
ALLTS
8520
8530
TSlO
TS20
T560
TSDO
TSEXSM

ALL DATA ASYNCHRONOUS SERVI CE5


ALL 8EARER 5ERVICES
ALL DATA CIRCUIT ASYNCHRONOUS SERVICES
ALL DATA CIRCUIT SYNCHRONOUS SERVICE5
ALL DATA TELESERVICES
ALL DATA SYNCHRONOUS SERVICES
ALL TELESERVICES
ALL DATA CIRCUIT ASYNCHRONOUS SERVICES
ALL DATA CIRCUIT SYNCHRONOUS SERVICES
ALL SPEECH TRANSMISSION SERVICES
ALL SHORT MESSAGE 5ERVICES
ALL FACSIMILE TRAN5MISSION SERVICES
AOXILIARY 5PEECH SERVICE5
ALL DATA TELE5ERVICE5 EXCEPT SHORT MES5AGE SERVICES

I/E
I/E
I/E
I/E
I/E
I/E
I/E
I/E/P/C
I/E/P/C
I/E/P/C
I/E/P
I/E/P/C
I/E/P/ C
I/E

I - This
HGSSI
E - This
HG5SE

string can be used in the command


to initiate a Supplementary Service.
string can be used in the command
to end a Supplementary Service.

APPLICATION INFORMATION HTRAN


2/155 18-CNT 238 004 7 Uen L 1996-12-11

This string can appear in the printout


initiated by command HGSDP
(SUPPLEMENTARY SERVICE DATA).
e ~ This string can be used in the commands
HGCUI, HGCUC , and HGCSC and can appear
ir. the printout initiated by commands
HGCSP {HLR CLOSED USER GROUP BASIC SERVICE
GROUP OPTIONS DATA) and HGCUP {HLR CLOSED
USER GROUP DATA) when the CUG functionality
is available.
When a certain Basic Service Group is not supported by the system the corresponding
string will not be recognized by it
=

Table of applicability of SS to Basic Service Groups when using commands HGSSI and
HGSSE:
BASIC SERVICE GROUPS
SS

BAIC

BAOC

BIC-Roam

BOIC

BOIC-exCH

CFU

CFB

CFNRC

CFNRY

cw

SPN

DCF

( X --> applies )

The Supplementary Services AOC, CLIP, CUR, COLP, COLR, CUG, HOLD, ICI, MPTY,
OIN , TIN, OICK and TICK are not used in the commands HGSSI and HGSSE.
Basic Service Groups correspondence
1 = TSlO

2
3
4
5

TS20
TS60
TSDO
BS20
BS30

(All Speech Transmission Services)


(All Short Message Services)
(All Facsmile Transmission Services)
(Auxiliary Speech Services)
{All Data Circuit Asynchronous Services)
(All Data Circuit Synchronous Services)

Table 5: Roaming area characteristic (CHAR)


String

Meaning

Action

AOCC

ADVICE OF CHARGE (CHARGING) SOPPORTED


(see note 1)
ROAMING RESTRICTED IN THIS PLMN
TRAFFIC WITH MAPV2 ALLOWED
ROAMING ALLOWED WHEN THE REGIONAL SERVICES ARE
NOT SUPPORTED
OLD HANDLING FOR LINE IDENTIFICATION RESTRICTION
SERVICES (see note 2)

I/E/P

ROAMREST
TRAFFV2
RSERV
OLDHLIDR
I

This string can be used in the command HGRCI

I/E/P
I/E/P
I/E/P
I/E/P

----APPLICA TI ON INFORMATION HTRAN


2/155 18-CNT 238 0047 Uen L 1996-12-11

I
E

13

Th i s strin g can be u s ed in the command HGRCI


t o s t ore t he roaming area characteris tic .
Thi s s t r i n g can b e u sed in the cornma nd HGRCE
to r ernove t he roarning area characteristic .
Th~s string can be used ~n the cornrnand HGRCP
to print the r oaming a r ea characteristics,
and can also appear in its printout
(HLR ROAMI NG AREA CHARACTERISTICS DATA)
and i n t he printou t i n i t iated by cornrnan d HGLSP
(HLR MOBILE SUBSCRIBER LOCATION SURVEY) .

This characteristic is only applicable when MAP V1 is used


between HLR and VLR. When a mobile subscriber having Advice of
Charge Charging provided roams into a VLR not characterized as
AOCC, the whole PLMN may be restricted until a new UPDATE
LOCATION message is performed from a VLR supporting Advice
ofCharge.

This characteristic is applicable to both CLIR and COLR


supplementary services. For CLIR it implies the old syntax in which
only the values 'temporary default restricted'
(RestrictionPerCaii=TRUE) and 'permanent'
(RestrictionPerCaii=FALSE) are allowed to convey CLIR
subscription information. For COLR it implies the old handling in
which the COLR related data is sent to VLR in lnsertSubscriberData
message only if the service is provided. When a certain Roaming
Area Characteristic is not supported by the system the
corresponding string will not be recognized by it.

Tab le 6 :

Service point e rs (SP)


These Service Po int e r s c an appear in the p ri ntou t file
initiated by command HGPFI .

SP

Meaning

2
4
5
6
7
8
9
10
11
15
16
17

CALL FORWARDI NG UNCON DITIONAL .


CALL FORWARDING ON MOBI LE SUBSCRIBER BUSY .
CALL FORWARDING ON NO REPLY.
CALL FORWARDING ON MOBILE SUBSCRIBER NOT REACHABLE .
SINGLE PERSONAL NUMBER.
CALL WAITING .
CALL HOLD .
MULTIPARTY SERVICE .
ADVICE OF CHARGE .
BARRING OF ALL OUTGOING CALLS .
BARRI NG OF ALL OUTGOING I NTERNATIONAL CALLS .
BARRING OF ALL OUTGOI NG I NTERNATIONAL CALLS
EXCEPT THOSE DIRECTED TO THE HOME PLMN COUNTRY.
BARRING OF ALL INCOMI NG CALLS .
BARRING OF ALL I NCOMING CALLS WHEN
ROAMING OUTSIDE THE HOME PLMN COUNTRY.
SUBSCRIBER CATEGORY .
OPERATOR DETERMINED BARRING OF ALL OUTGOING CALLS .
OPERATOR DETERMINED BARRING OF ALL INCOMING CALLS .
OPERATOR DETERMINED BARRING OF ROAMING .
OPERATOR DETERM I NED BARRING OF OUTGOING
PREMIUM RATE CALLS (INFORMATION) .
OPERATOR DETERMINED BARRING OF OUTGOING
PREMIUM RATE CALLS (ENTERTAINMENT) .
OPERATOR DETERMINED BARRING OF
SUPPLEMENTARY SERVICES MANAGEMENT.
WHEN REGI STERED I N THE HPLMN ,
OPERATOR SPECIFIC BARRING (TYPE 1) .
WHEN REGISTERED IN THE HPLMN,
OPERATOR SPECIFIC BARRING (TYPE 2) .
WHEN REGI STERED IN THE HPLMN,

19
20
21
23
24
25
26
27
28
29
30
31

APPLICATION INFORMATION HTRAN


2/155 18-CNT 238 0047 U e n L 1996-12-11

32

OPERATOR SPECIFIC BARRING (TYPE 3).


WHEN REGISTERED IN THE HPLMN,
OPERATOR SPECIFIC BARRING (TYPE 4).

Table 6 lcontin.):

Service pointers (SP)

SP

Meaning

33
35
36
37
38
39
40
41
42
43
44

ORIGIN FOR FORWARDED-TO NUMBER ANALYSIS.


IMMEDIATE CALL ITEMIZATION.
ORIGINATING INTELLIGENT NETWORK.
TERMINATING INTELLIGENT NETWORK.
CALLING LINE IDENTIFICATION PRESENTATION .
CALLING LINE IDENTIFICATION RESTRICTION
CONNECTED LINE IDENTIFICATION PRESENTATION
CONNECTED LI NE IDENTIFICATION RESTRICTION
SUBSCRIPTION OPTION CONTROL OF BARRING SERVICES .
SUBSCRIPTION OPT ION CALL FORWARDING UNCONDITIONAL .
SUBSCRIPTION OPTI ON CALL FORWARDING ON MOBILE
SUBSCRIBER BUSY.
SUBSCRIPTION OPTION CALL FORWARDING ON NO REPLY .
SUBSCRIPTION OPTION CALL FORWARDING ON MOBILE SUBSCRIBER
NOT REACHABLE .
SUBSCRIPTION OPTION CALLING LINE IDENTIFICATION PRESENTATION.
SUBSCRIPTION OPTION CALLING LINE IDENTIFICATION RESTRICTION .
SUBSCRIPTION OPTION CONNECTED LINE IDENTIFICATION
PRESENTATION.
ALL SPEECH TRANSMISSION SERVICES.
TELESERVICE "TELEPHONY".
ALL SHORT MESSAGE SERVICES.
TELESERVICE "SHORT MESSAGE MT/PP".
TELESERVICE "SHORT MESSAGE MO/PP " .
ALL FACSIMILE TRANSMISSION SERVICES.
TELESERVICE " AUTOMATIC FACSIMILE GROUP 3".
AUXILIARY SPEECH SERVICES.
TELESERVICE "AUXILIARY TELEPHONY" .
ALL DATA CIRCUIT ASYNCHRONOUS SERVICES.
BEARER SERVICE " DATA CIRCUIT ASYNCHRONOUS 300 b/s".
BEARER SERVICE " DATA CIRCUIT ASYNCHRONOUS 1200 b/s ".
BEARER SERVICE " DATA CIRCUIT ASYNCHRONOUS 1200-75 b/s " .
BEARER SERVICE " DATA CIRCUIT ASYNCHRONOUS 2400 b/s ".
BEARER SERVICE " DATA CIRCUIT ASYNCHRONOUS 4800 b/s" .
BEARER SERVICE " DATA CI RCUIT ASYNCHRONOUS 9600 b/s " .
ALL DATA CIRCUIT SYNCHRONOUS SERVICES.
BEARER SERVICE " DATA CIRCUIT SYNCHRONOUS 1200 b/s " .
BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 2400 b/s ".
BEARER SERVICE " DATA CI RCUIT SYNCHRONOUS 4800 b/s " .

45
46
47
48
49
50
51
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70

Tab1e 6 (contin.) :

Service pointers (SP)

SP

Meaning

71

BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 9600 b/s".


DEFAULT BASIC SERVICE GROUP .
TELESERVICE "ALTERNATE SPEECH ANO FACSIMILE GROUP 3".
CLOSED USER GROOP.
REGIONAL SERVICES.
PRIMARY INTER-EXCHANGE CARRIER IDENTIFIER.
DEFAULT CALL FORWARDING.
SOBSCRIPTION OPTION FOR NOTIFICATION OF DEFAULT
CALL FORWARDING .
SOBSCRIPTION OPTION FOR FORWARDING CONDITIONS
FOR DEFAULT CALL FORWARDING.
CHANNEL ALLOCATION PRIORITY LEVEL.
ORIGINATING INTELLIGENT NETWORK CATEGORY KEY.
TERMINATING INTELLIGENT NETWORK CATEGORY KEY.
SUBSCRIPTION TYPE

72
80
81
82
83
84
85
86
87
88
89
90

2.2

14

Mobile Telephony Data

APPLICATION INFORMATION HTRAN


21155 18-C..:N r 238 0047 Uen L 1996-12-11

Command

15

Pa~ameter

Value
Ranqe

SSN

Subsystem Number SSN=6, HLR


entity within the Mobile
Application Part
In case the MAP policing in HLR
is not supported by the system
Lhis value will not be
recognized.

NP

0-15

Numbering Plan
The Numbering Plan that can be
used in the policing address
when SSN6 (MAP-HLR) :
1
E.163 and E.164
0,2-15 Not applicable . These
values can be used in
the commands but they are
not accepted by MAP when
received from the network.

NA

0-127

Nature of Address
The Nature of address that can be
used in the policing address
when SSN-6:
3
National significant
number
4
International number
0-2,5-127 Not applicable. These
values can be used in
the commands but they
are not accepted by
MAP when received from
the netwo~k.

OPER

See
Incorning operations in HLR,
description. received in a TC-BEGIN
dialogue prirnitive
Expressed as opslogan-opversion where:
opslogan
Operation slogan Identifier
1-7 characters
opversion
Operation version
Numeral 1-8
The operations allowed are:
ACTIVSS-1
Activate SS
with MAP1
ACTIVSS-2
Actvate SS
with MAP2
BSOBACT-1
Begin Subscriber
Activity with MAPl

Command
Parameter

Value
Range

D<?.scri.ptiory

Description
DEACTSS-1
DEACTSS-2
ERASESS-1
ERASESS-2
INTERSS-1
INTERSS-2
MSPURGE-2
NOTEMSP-1

Deactivate SS
with MAPl
Deactivate SS
with MAP2
Erase SS
with MAPl
8rase SS
with MAP2
Interroga te SS
with MAP1
Interroga te SS
with MAP2
MS Purge with
MAP2
Note MS Present

'

APPLICATION INFORMATION HTRAN


2/155 16-CNT 236 0047 Uen L 1996-12-11

PUSSDAT-1
PUSSREQ-2
REGPASS-l
REGPASS-2
REGTRSS-1
REGTRSS-2
RESDATA-2
ROUINRQ-1
ROUINRQ-2
SETMWDA-1
SPARAMR-1
SROUINF-1
SROUINF-2

Command
Parameter

Value
Range

16

with MAP1
Process Unstructured
SS Data with MAP1
Process Unstructured
SS Request with MAP2
Register Password
with MAPl
Register Password
with MAP2
Register SS
with MAPl
Register SS
with MAP2
Restare Data
with MAP2
Routing Information
Request with MAP1
Routing Information
Request with MAP2
Set Message Waiting
Data with MAP1
Send Parameters
with MAP1
Send Routing
Information with
MAPl
Send Routing
Information with
MAP2

Description
SROUTSM-1
UNSSREQ-2
UNSSNOT-2
UPDALOC-1
UPDALOC-2

Send Routing
Information for SM
with MAP
Unstructured SS
Request with MAP2
Unstructured SS
Notify with MAP2
Update Location
with MAP1
Update Location
with MAP2

NOTE: When a certain operation


is not supported by the
system, the corresponding
OPER value will not be
recognized .
SP

Signalling Point
Se e
description . Expressed as ni-spc where:
ni
Network Indicator
Numeral 0-3
O - International network
number 1
1
Internationa1 network
number 2
2 = National network
number 1
3 a National network
number 2
spc Signalling Point Code
Numeral 0- 16383

También podría gustarte