Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Semiconductor
This Novec fluid can be used in cooling of ion implanters, dry etchers and CVD machines in semiconductor
manufacturing facilities.
Test Equipment
The fluid may be used to cool semiconductor thermal shock and test equipment.
Electronic Cooling
Due to compatibilty with most electronic components and dielectric strength, Novec 7600 fluid can be used
in single and two-phase cooling of supercomputers, sensitive military electronics and also high voltage
transformers and power electronics.
Industrial/Pharmaceutical
Novec 7600 fluid can also be used as an alternative to commonly used heat transfer fluids in pharmaceutical
and chemical process cooling.
The primary advantage of Novec 7600 fluid over a comparable PFC or PFPE, however, is reduced Global
Warming Potential (GWP). Novec 7600 fluid has been developed as a low-GWP alternative to perfluorocarbon
and perfluoropolyether heat transfer liquids Novec 7600 fluid is also non-ozone-depleting.
Properties
Boiling Point (C)
Pour Point (C)
Molecular Weight
Boiling Point (C) @ 760 mmHg
Freeze Point (C)
Liquid Density (g/ml)
Coefficient of Expansion
Latent Heat of Vaporization @ 1 atm. (kJ/kg)
Surface Tension (dynes/cm)
Kinematic Viscosity (cSt)
Critical Temperature (C)
Critical Pressure (Mpa)
Solubility of Solvent in Water (ppb)
Solubility of Water in Solvent (ppb)
Dielectric Strength, 2.54 mm gap (kV)
Volume Resistivity
Dielectric Constant
100
10
0.1
-70 -60 -50 -40 -30 -20 -10
10
20
T (C)
30
40
50
60
70
80
1650
1600
1550
1500
1450
1400
1350
-70
-50
-30
-10
10
30
T (C)
50
70
90
110
130
70
90
110
130
0.100
0.090
0.080
0.070
0.060
0.050
0.040
0.030
-70
-50
-30
-10
10
30
50
T (C)
1700
1600
1500
1400
1300
1200
1100
1000
-70
-50
-30
-10
10
30
50
70
90
110
130
T (C)
Toxicity Profile
Not for specification
purposes.
3M Novec 7600 Engineered Fluid indicates very low overall toxicity. The LD50 (rat) is greater than 2000
mg/kg and the results of a 28-day repeated dose oral toxicity study in rats also indicate low repeat dose toxicity.
Novec 7600 fluid is expected to be minimally irritating to the eyes and skin and was negative in the two
mutagenicity studies conducted.
Environmental Properties
Properties
0.0
700
CFC-11 = 1.0
9
Nonflammable
2.9-8.8%
Materials Compatibility
In practice, Novec fluids differ somewhat from PFCs and PFPEs in their ability to dissolve certain oils. This
means that Novec 7600 fluid is more likely to extract plasticizers from elastomeric materials. For this reason,
elastomeric O-ring and seal materials should be limited to those that contain a low amount of plasticizer.
EPDM, EPR and butyl typically fall into this category. 3M engineers can suggest appropriate compounds or
assist with test procedures.
Heater Selection
The critical heat flux of Novec 7600 fluid, like similar Novec fluids, lies in the range of 15W/cm -20W/cm when
boiling from a horizontal 0.5mm diameter platinum wire in a quiescent pool of saturated fluid. The maximum
heat flux obtainable in forced convection applications is significantly higher, depending largely on the geometry
and flow conditions. A safety interlock between the pump and heater is strongly recommended in applications
with heat fluxes approaching 15W/cm2.
Regulatory Status
Novec 7600 fluid has been approved by new chemical notification authorities in both Japan and Korea.
Notifications are underway in Europe and the United States. Contact your local 3M representative regarding
the regulatory status of Novec 7600 fluid in other countries.
Resources
3M Novec Engineered Fluids are supported by global sales, technical and customer service resources,
with technical service laboratories in the U.S., Europe, Japan, Latin America and Southeast Asia. Users
benefit from 3Ms broad technology base and continuing attention to product development, performance,
safety and environmental issues. For additional technical information on 3M Novec 7600 Engineered
Fluid in the United States or for the name of a local authorized distributor, call 3M Electronics Markets
Materials Division: 800 810 8513.
The 3M Novec
Brand Family
The Novec brand is the hallmark for a variety of patented 3M products. Although each has its own unique formula and performance properties, all
Novec products are designed in common to address the need for safe, effective, sustainable solutions in industry-specific applications. These include
precision and electronics cleaning, heat transfer, fire protection, lubricant deposition and several specialty chemical applications.
3M Novec Engineered Fluids 3M Novec Aerosol Cleaners 3M Novec 1230 Fire Protection Fluid 3M Novec Electronic Coatings 3M Novec Electronic Surfactants
United States
3M Electronics Markets
Materials Division
800 810 8513
China
3M China Ltd.
86 21 6275 3535
Europe
3M Belgium N.V.
32 3 250 7521
Japan
Sumitomo 3M Limited
813 3709 8250
Korea
3M Korea Limited
82 2 3771 4114
Singapore
3M Singapore Pte. Ltd.
65 64508888
Product Use: All statements, technical information and recommendations contained in this document are based on tests or experience that 3M believes are reliable. However,
many factors beyond 3Ms control can affect the use and performance of a 3M product in a particular application, including conditions under which the product is used and the
time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the users knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the users method of application.
Warranty and Limited Remedy: Unless stated otherwise in 3Ms product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M
product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User
is responsible for determining whether the 3M product is fit for a particular purpose and suitable for users application. If the 3M product is defective within the warranty period,
your exclusive remedy and 3Ms and sellers sole obligation will be, at 3Ms option, to replace the product or refund the purchase price.
Limitation Of Liability: Except where prohibited b.incidental, or consequential regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
3
Electronics Markets Materials Division
3M Center, Building 224-3N-11
St. Paul, MN 55144-1000
www.3M.com/novec
1-800-810-8513