Documentos de Académico
Documentos de Profesional
Documentos de Cultura
GPT
OPERATION
PULSCOs Gas Pulsation Dampener eliminates hazardous line vibrations
and accompanying annoying noises. Excessive vibrations can lead to failure
of the line or pipe supports or trip safety valves. PULSCO dampeners are
custom designed for each application to provide the desired level of residual
pulsations in the line. Depending on the compressor speed and the gas
characteristics, the design may include a single chamber impedance tube, a
dual chamber choke tube, or a three-chamber, three-tube design that was
originally developed by PULSCO. Gas Pulsation Dampeners are effective on
both the suction and discharge sides of positive displacement equipment.
outlet
port
tubes
chambers
vent
ports
inlet
port
FEATURE - Benefit
PERFORMANCE output pressure pulsations are reduced to less than 8% of input pulsations. PULSCOs Gas Pulsation Dampener typically carries a
guarantee for residual pulsations of 1% of line pressure.
FREQUENCY RANGE designs are available for a wide range of operating frequency. Performance improves with increasing frequency and therefore
higher harmonics are typically dampened to a greater degree than the fundamental frequency.
PRESSURE DROP typical pressure drops are 1% of line pressure, but designs can be adjusted to other values. The lower the pressure drop, the larger
the dampener must be to achieve the same level of performance. A pressure drop lower than percent of the line pressure is not recommended.
ZERO MAINTENANCE The GPT has zero moving parts and does not require spare parts.
dampeners, is never required.
GAS
PULSATION DAMPENER
PULSCO, Inc. I 17945 Sky Park Circle I Suite G I Irvine I California I 92614 I USA I Ph: 949.261.1717 I TF: 877.PULSCO.2
GPT
sales@pulsco.com I www.pulsco.com
800-1007
VARIABLES
CONFIGURATION:
Compressor Type:
Speed, rpm
Max:
Distance between Cylinders:
Model:
Min:
Stroke:
Design:
SERVICE CONDITIONS:
Stage
Service
Gas (type)
Sp. Gr. or M.W.
Suction
Discharge
Suction
Discharge
Discharge
Suction
Discharge
Discharge
Suction
Discharge
Discharge
Suction
Discharge
Cp/Cv = K Value
Pressure, psia
Temperature,
F
Compressibility, Z
Flow Rate SCFM
COMPRESSOR INFORMATION:
Suction
# of cylinders per stage
Dbl. or Sgl. Acting
Bore, inches
Stroke, inches
Nozzle Size
Flange Rating
Line Nozzle Size
Flange Rating
Clearance Volume*
DESIGN SPECIFICATION:
Suction
Pressure Drop
Residual Pulse %
Design Pressure, psig
Design Temperature,
F
Code Requirements
Corrosion Allowance
Radiography
Requirements
Material Type
Inspection Openings
Other Connections
Supports Required
GAS
PULSATION DAMPENER