Documentos de Académico
Documentos de Profesional
Documentos de Cultura
4 Change O/s
Configuration and ParametersTake the backup before modifying the O/s configuration
files.cp sysctl.conf sysctl.confoldcd /etcvi sysctl.conf Add the following to the Kernel sysctl
configuration file for Red Hat Linux# Kernel sysctl configuration file for Red Hat Linux## For
binary values, 0 is disabled, 1 is enabled. See sysctl(8) and# sysctl.conf(5) for more details.#
Controls IP packet forwardingnet.ipv4.ip_forward = 0# Controls source route
verificationnet.ipv4.conf.default.rp_filter = 1# Do not accept source
routingnet.ipv4.conf.default.accept_source_route = 0# Controls the System Request
debugging functionality of the kernelkernel.sysrq = 0# Controls whether core dumps will
append the PID to the core filename
4. Press Esc +Shift :q! to quit without saving the changes The following
packages(rpm) are required for Enterprise Linux:checking rpm:rpm q rpmnamerpm q
elfutils-libelf-devel-0.125-3.el5.i386rpm q gcc-4.1.2-46.el5.x86_64rpm q gcc-c++-4.1.246.el5.x86_64rpm q glibc-devel-2.5-42.i386rpm q libaio-0.3.106-3.2.i386rpm q libaio0.3.106-3.2.x86_64rpm q libaio-devel-0.3.106-3.2.i386rpm q libaio-devel-0.3.1063.2.x86_64rpm q libstdc++-4.1.2-46.el5.i386rpm q libstdc++-4.1.2-46.el5.x86_64rpm q
libstdc++-devel-4.1.2-46.el5.i386rpm q libstdc++-devel-4.1.2-46.el5.x86_64rpm q libXp1.0.0-8.1.el5.x86_64rpm q libxp6-1.0.1-2.mga2.i586rpm q libxp6-1.0.1-3-mdv2012.0.i586
version from the path where it is saved before installing weblogic server./jrockit jdk1.6.0_22-R28.1.1-4.0.1-linux-x64.bin
7. Click Next with the default Product Installation DirectoryClick Next without
selecting Optional Components
8. You will get the below confirmation message once the JDK has been installed
successfully.
9. Click on Done to exit from JDK installation.Set JAVA_HOME and path by editing
the bash_profile by using below command.vi .bash_profilePATH=$PATH:$HOME/binexport
JAVA_HOME=/home/oracle/Oracle/jrockit - jdk1.6.0_22-R28.1.1-4.0.1
12. Create a new Middleware Home and give the location to be installed Click
Next and uncheck the "I Wish to" and click Yes to continue
13. Check the "I Wish to..." and click on Continue to proceed further Continue
with default install Type "Typical" and click on Next
15. Choose default web logic server location and click next to continue WLS
installation Click Next
16. You will get the above screen after installation got success. Uncheck the check
box and click onDone. Check the Middleware location in the installed path Go to the
Stage directory where the software is downloaded and staged and run the belowcommand
to start the installation./runIstaller Select default values for Inventory Directory and
Operating System Group Name
18. Select "Skip Software Updates" and click Next to continue installation
19. Select "Install and Configure" and click Next to continue installation
20. Click next to continue and ignore the warning for operating system prerequisite
checks
21. Select the Oracle Middleware Home Location, Web logic server location and
Oracle InstanceLocation and click Next to continue installation
22. Select "Configure For Deployment" and click Next to continue installation
23. Select "Create Domain" and give the credentials for web logic server em
console and click Nextto continue installation
24. Select at least one developer tools and click Next to continue installation
25. Select "Auto Port Configuration" and click Next to continue installation
26. Select "Do Not Use Proxy Settings" and click Next to continue installation
27. Uncheck "Use Application Identity Store" and click Next to continue installation
28. Click on "Install" to start the installation You will get the below confirmation
dialog once the installation reached 100% and connect toLinux as root and execute the
below command
30. As we faced above error while configuring the domain ..modifications done on
this issue:1) Make sure that your Hostname and Gateway has properly configured.2) Make
sure that below RPM packages are installed or not.libXp-1.0.0-8.1.el5.x86
64.rpmopenmotif22-2.2.3-20.x86 64.rpm3) Make sure that Firewall and Selinux has been
Disabled.Root] # service iptables status.Root] # service iptables stop.Refer below links for
more information:
31.http://dirknachbar.blogspot.in/2011_02_01_archive.htmlhttp://dirknachbar.blogspo
t.in/2011/02/oracle-reports-1111-reports.html Click Next once the configuration reached
100%Click "Finish" once the installation is completed.
ORACLE_INSTANCE=/home/oracle/Oracle/Middleware/asinst_1exportLD_LIBRARY_PATH
=/home/oracle/Oracle/Middleware/Oracle_FRHome1/lib:/home/oracle/Oracle/Middleware/Or
acle_FRHome1/jdk/jre/lib/amd64/native_threadsexport
FORMS_BUILDER_CLASSPATH=/home/oracle/Oracle/Middleware/Oracle_FRHome1/jlibex
port FORMS_PATH=/home/oracle/Oracle/data/myforms
33. Some Tips to start the servers from Linux:To find any file name use the below
commandfind . -name *.DATfind . -name *.lokTo remove any file execute the below
commandrm -rf <File name with path>start Admin Server****************cd
/home/oracle/Oracle/Middleware/user_projects/domains/ClassicDomain/bin./
startWebLogic.shstart nodeManager******************cd
/home/oracle/Oracle/Middleware/wlserver_10.3/server/bin
37. If we are facing any issue while opening form builder in Linux, just executethe
below command as root user]# xhost + To open the form builder in Linux execute below
command from the path/home/oracle/Oracle/Middleware/asinst_1/bin./frmbld.sh Move the
attached form HR.fmb to the path /home/oracle/Oracle/data/myforms Compile the form
HR.fmb by opening it in form builder and it will generate HR.fmx in the samedirectory.
Open the deployed form in web browser by using the link below and you will get error as
FRM-40010: Cannot read form HR.http://bias17.bias.com:8888/forms/frmservlet?
config=hr8&form=HR
38. If we get this error, then we need to log in into web logic em and need to give
theFORMS_PATH for environment configuration as /home/oracle/Oracle/data/myforms
After the path provided then click on "Apply" button then will get confirmation messageas
"Changes have been applied"
39. Try again by opening the link in web browser you will get the below
screenhttp://bias17.bias.com:8888/forms/frmservlet?
config=hr8&form=HRUsername:hr8password:hr8Database:DEV Enter the credentials for
the database then the form will open
40. If you do not want to enter the data base credentials at runtime, you need to
configurethem in web logic server em under web configuration.userid= hr8/hr8@DEV
41. Click on "Apply" button you will get the confirmation "Applying Changes CompletedSuccessfully" and then click on Close. Try again by opening the link in web
browser you will get the below screen and this timeit will not ask for database
credentialshttp://bias17.bias.com:8888/forms/frmservlet?config=hr8&form=HR
42. Starting the In-process Server (Windows and UNIX) for Reports:If you are using
Reports Server as an in-process server (the default configuration),sending a run report
request starts the in-process server; however, if you are sending arequest through a
command line, the servlet must be invoked first using either the runreport URL or the Web
command URL. When you have successfully started the servlet,this also means you have
successfully started the in-process server.To directly start the in-process server from a URL,