Está en la página 1de 113

ORDER NO.

CRT2847
DEH-P940MP/UC

MULTI-CD/DAB CONTROL DSP HIGH POWER CD/MP3/WMA PLAYER WITH FM/AM TUNER

DEH-P940MP

DEH-P9400MP
DEH-P9450MP

UC

UC
ES

This service manual should be used together with the following manual(s):
Model No.
CX-3007

Order No.
CRT2820

Mech.Module
S9MP3

Remarks
CD Mech. Module:Circuit Description,Mech. Description,Disassembly

For details, refer to "Important symbols for good services".

PIONEER CORPORATION

4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan


PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936

PIONEER CORPORATION 2002

K-ZZS.FEB.2002.printed in Japan

SAFETY INFORMATION
CAUTION

This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repai
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state o
California to cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 - Proposition 65

[ Important symbols for good services ]


In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.
When you find the procedures bearing any of the symbols, be sure to fulfill them:

1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.
B

2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable.
In accordance with the procedures or instructions described in this manual, adjustments should be performed.

3. Cleaning
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,
proper cleaning should be performed to restore their performances.

4. Shipping mode and shipping screws


To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.

5. Lubricants, glues, and replacement parts


Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying
glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the
prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed
ones should be used.

DEH-P940MP/UC

2
1

CONTENTS
SAFETY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. EXPLODED VIEWS AND PARTS LIST . . . . . . . . . . . . . . . . . . . . . . .
2.1 PACKING(DEH-P940MP,P9400MP) . . . . . . . . . . . . . . . . . . . . . . .
2.2 PACKING(DEH-P9450MP) . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 EXTERIOR(1)(DEH-P940MP,P9400MP) . . . . . . . . . . . . . . . . . . . .
2.4 EXTERIOR(2)(DEH-P940MP,P9400MP) . . . . . . . . . . . . . . . . . . . .
2.5 EXTERIOR(1)(DEH-P9450MP) . . . . . . . . . . . . . . . . . . . . . . . . .
2.6 EXTERIOR(2)(DEH-P9450MP) . . . . . . . . . . . . . . . . . . . . . . . . .
2.7 CD MECHANISM MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM . . . . . . . . . . . . . . . . . .
3.1 BLOCK DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 OVERALL CONNECTION DIAGRAM(DEH-P940MP,P9400MP)(GUIDE PAGE)
3.3 OVERALL CONNECTION DIAGRAM(DEH-P9450MP)(GUIDE PAGE) . . . . .
3.4 DSP UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5 KEYBOARD UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6 CD MECHANISM MODULE(GUIDE PAGE) . . . . . . . . . . . . . . . . . . .
4. PCB CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1 TUNER AMP UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 DSP UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3 KEYBOARD UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4 CD CORE UNIT(S9MP3) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.5 EQ PCB, SWITCH PCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. ELECTRICAL PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6. ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1 CD ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT . . . . .
6.3 TEST MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4 DISPLAY TEST MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1 DIAGNOSIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.1 DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.2 CONNECTOR FUNCTION DESCRIPTION . . . . . . . . . . . . . . . . . .
7.2 IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3 OPERATIONAL FLOW CHART . . . . . . . . . . . . . . . . . . . . . . . . .
7.4 CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8. OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .2
. .4
. .6
. .6
. .8
. 10
. 12
. 14
. 16
. 18
. 20
. 20
. 22
. 28
. 34
. 36
. 38
. 46
. 46
. 50
. 52
. 54
. 56
. 57
. 75
. 75
. 77
. 79
. 80
. 82
. 82
. 82
. 86
. 87
107
108
109

- CD Player Service Precautions


1. Before shipping out the repaired product, confirm the
position of the DSP MODE switch; the switch should
be set to the side that the customer previously selected.
If the switch is set to the STD side on the product
where the NW side was selected, the speakers connected may be damaged.

3. During disassembly, be sure to turn the power off


since an internal IC might be destroyed when a connector is plugged or unplugged.
4. Please checking the grating after changing the service pickup unit(see page 77).

2. For pickup unit(CXX1550) handling, please refer


to"Disassembly"(see page 82)
During replacement, handling precautions shall be
taken to prevent an electrostatic discharge(protection
by a jumper-solder).

DEH-P940MP/UC
5

3
7

Continuous power output is 22 W per channel min. into 4


ohms, both channels driven 50 to 15,000 Hz with no more
than 5% THD.
Maximum power output ...................................... 50 W 4
Load impedance ............................ 4 (4 8 allowable)
Preout maximum output level/
output impedance .................................... 6.5 V/100
Loudness contour ........ +10 dB (100 Hz), +6.5 dB (10 kHz)
(volume: 30 dB)
Equalizer (13-Band Graphic Equalizer)
Frequency .................. 50/80/125/200/315/500/800 Hz
1.25/2/3.15/5/8/12.5 kHz
Equalization range ................................ 12 dB (2 dB)
Auto Equalizer (Just for standard mode)
(Front & Rear & Subwoofer 13-Band Graphic)
Frequency .................. 50/80/125/200/315/500/800 Hz
1.25/2/3.15/5/8/12.5 kHz
Equalization range ...................... +6 12 dB (2 dB)
Network (Standard mode)
HPF (Front/Rear)
Frequency .......................... 50/63/80/100/125 Hz
Slope ................................................ 12 dB/oct.
Subwoofer output
Frequency .......................... 50/63/80/100/125 Hz
Slope ................................................ 18 dB/oct.
Gain .............................. 24 dB +6 dB (1 dB)
Phase ........................................ Normal/Reverse
Network (3-way network mode)
HIGH HPF
Frequency
..............1.6/2/2.5/3.15/4/5/6.3/8/10/12.5/16 kHz
Slope ............................................ 6/12 dB/oct.
Gain ........................ 24 dB 0 dB/Mute (1 dB)

Audio/DSP

Power source .............. 14.4 V DC (10.8 15.1 V allowable)


Grounding system .......................................... Negative type
Max. current consumption ........................................ 10.0 A
Backup current ..........................................Less than 6 mA
Dimensions
(DIN) (chassis) ...... 178 (W) 50 (H) 157 (D) mm
[7 (W) 2 (H) 6-1/8 (D) in.]
(nose) ............ 188 (W) 58 (H) 24 (D) mm
[7-3/8 (W) 2-1/4 (H) 1 (D) in.]
(D) (chassis) ...... 178 (W) 50 (H) 162 (D) mm
[7 (W) 2 (H) 6-3/8 (D) in.]
(nose) ............ 170 (W) 45 (H) 19 (D) mm
[6-3/4 (W) 1-3/4 (H) 3/4 (D) in.]
Weight ........................................................ 1.7 kg (3.7 lbs.)

General

DEH-P940MP/UC

Note:
Specifications and design are subject to modification without notice for the sake of improvements.

Note:
Specifications and design are subject to modification without notice for the sake of improvements.

Frequency range ......................... 530 1,710 kHz (10 kHz)


Usable sensitivity .................................. 18 V (S/N: 20 dB)
Selectivity .................................................. 50 dB (10 kHz)

AM tuner

Frequency range ...................................... 87.9 107.9 MHz


Usable sensitivity ........................................................ 9 dBf
(0.8 V/75 , mono, S/N: 30 dB)
50 dB quieting sensitivity ...... 15 dBf (1.5 V/75 , mono)
Signal-to-noise ratio ........................ 70 dB (IHF-A network)
Distortion ............................ 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 15,000 Hz (3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
Selectivity ...................................................... 70 dB (2ACA)
Three-signal intermodulation
(desired signal level) ........................................ 30 dBf
(two undesired signal level: 100 dBf)

FM tuner

System .................................... Compact disc audio system


Usable discs .................................................. Compact disc
Signal format ...................... Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
Frequency characteristics ................ 5 20,000 Hz (1 dB)
Signal-to-noise ratio ............ 94 dB (1 kHz) (IHF-A network)
Dynamic range .............................................. 92 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
MP3 decoding format ........ MPEG-1 and 2 AUDIO LAYER-3
WMA decoding format .................................... Ver. 7 and 8

Frequency range ......................... 530 1,710 kHz (10 kHz)


Usable sensitivity .................................. 18 V (S/N: 20 dB)
Selectivity .................................................. 50 dB (10 kHz)

AM tuner

Continuous power output is 22 W per channel min. into 4


ohms, both channels driven 50 to 15,000 Hz with no more
than 5% THD.
Maximum power output ...................................... 50 W 4
Load impedance ............................ 4 (4 8 allowable)
Preout maximum output level/
output impedance .................................... 4.0 V/100
Loudness contour ........ +10 dB (100 Hz), +6.5 dB (10 kHz)
(volume: 30 dB)
Equalizer (13-Band Graphic Equalizer)
Frequency .................. 50/80/125/200/315/500/800 Hz
1.25/2/3.15/5/8/12.5 kHz
Equalization range ................................ 12 dB (2 dB)
Auto Equalizer (Just for standard mode)
(Front & Rear & Subwoofer 13-Band Graphic)
Frequency .................. 50/80/125/200/315/500/800 Hz
1.25/2/3.15/5/8/12.5 kHz
Equalization range ...................... +6 12 dB (2 dB)
Network (Standard mode)
HPF (Front/Rear)
Frequency .......................... 50/63/80/100/125 Hz
Slope ................................................ 12 dB/oct.
Subwoofer output
Frequency .......................... 50/63/80/100/125 Hz
Slope ................................................ 18 dB/oct.
Gain .............................. 24 dB +6 dB (1 dB)
Phase ........................................ Normal/Reverse
Network (3-way network mode)
HIGH HPF
Frequency
..............1.6/2/2.5/3.15/4/5/6.3/8/10/12.5/16 kHz
Slope ............................................ 6/12 dB/oct.
Gain ........................ 24 dB 0 dB/Mute (1 dB)

Audio/DSP

CD player

Phase .......................................... Normal/Reverse


MID HPF/LPF
Frequency (LPF)
..............1.6/2/2.5/3.15/4/5/6.3/8/10/12.5/16 kHz
Frequency (HPF)
................31.5/40/50/63/80/100/125/160/200 Hz
Slope (LPF) .................... 0 (Pass)/6/12 dB/oct.
Slope (HPF) ............ 0 (Pass)/6/12/18 dB/oct.
Gain ........................ 24 dB 0 dB/Mute (1 dB)
Phase .......................................... Normal/Reverse
LOW LPF
Frequency
................31.5/40/50/63/80/100/125/160/200 Hz
Slope .................................... 6/12/18 dB/oct.
Gain ...................... 24 dB +6 dB/Mute (1 dB)
Phase .......................................... Normal/Reverse

Frequency range ...................................... 87.9 107.9 MHz


Usable sensitivity ........................................................ 9 dBf
(0.8 V/75 , mono, S/N: 30 dB)
50 dB quieting sensitivity ...... 15 dBf (1.5 V/75 , mono)
Signal-to-noise ratio ........................ 70 dB (IHF-A network)
Distortion ............................ 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 15,000 Hz (3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
Selectivity ...................................................... 70 dB (2ACA)
Three-signal intermodulation
(desired signal level) ........................................ 30 dBf
(two undesired signal level: 100 dBf)

FM tuner

System .................................... Compact disc audio system


Usable discs .................................................. Compact disc
Signal format ...................... Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
Frequency characteristics ................ 5 20,000 Hz (1 dB)
Signal-to-noise ratio ............ 94 dB (1 kHz) (IHF-A network)
Dynamic range .............................................. 92 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
MP3 decoding format ........ MPEG-1 and 2 AUDIO LAYER-3
WMA decoding format .................................... Ver. 7 and 8

CD player

Power source .............. 14.4 V DC (10.8 15.1 V allowable)


Grounding system .......................................... Negative type
Max. current consumption ........................................ 10.0 A
Backup current ............................................Less than 6 mA
Dimensions
(DIN) (chassis) ...... 178 (W) 50 (H) 157 (D) mm
[7 (W) 2 (H) 6-1/8 (D) in.]
(nose) ............ 188 (W) 58 (H) 24 (D) mm
[7-3/8 (W) 2-1/4 (H) 1 (D) in.]
(D) (chassis) ...... 178 (W) 50 (H) 162 (D) mm
[7 (W) 2 (H) 6-3/8 (D) in.]
(nose) ............ 170 (W) 45 (H) 19 (D) mm
[6-3/4 (W) 1-3/4 (H) 3/4 (D) in.]
Weight ........................................................ 1.7 kg (3.7 lbs.)

General

Specifications(DEH-P9400MP/UC)

Phase .......................................... Normal/Reverse


MID HPF/LPF
Frequency (LPF)
..............1.6/2/2.5/3.15/4/5/6.3/8/10/12.5/16 kHz
Frequency (HPF)
................31.5/40/50/63/80/100/125/160/200 Hz
Slope (LPF) .................... 0 (Pass)/6/12 dB/oct.
Slope (HPF) ............ 0 (Pass)/6/12/18 dB/oct.
Gain ........................ 24 dB 0 dB/Mute (1 dB)
Phase .......................................... Normal/Reverse
LOW LPF
Frequency
................31.5/40/50/63/80/100/125/160/200 Hz
Slope .................................... 6/12/18 dB/oct.
Gain ...................... 24 dB +6 dB/Mute (1 dB)
Phase .......................................... Normal/Reverse

Specifications(DEH-P940MP/UC)

1
4

1. SPECIFICATIONS

System .................................... Compact disc audio system


Usable discs .................................................. Compact disc
Signal format ...................... Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
Frequency characteristics ................ 5 20,000 Hz (1 dB)
Signal-to-noise ratio ............ 94 dB (1 kHz) (IEC-A network)
Dynamic range .............................................. 92 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
MP3 decoding format ........ MPEG-1 and 2 AUDIO LAYER-3
WMA decoding format .................................... Ver. 7 and 8

DEH-P940MP/UC

Note:
Specifications and design are subject to modification without notice for the sake of improvements.

Wave length .............................................. 940 nm 50 nm


Output ........ typ; 12 mw/sr per Infrared LED (2 LEDs used)

Infrared remote control

Frequency range .......................... 531 1,602 kHz (9 kHz)


530 1,640 kHz (10 kHz)
Usable sensitivity .................................. 18 V (S/N: 20 dB)
Selectivity .................................................... 50 dB (9 kHz)
50 dB (10 kHz)

AM tuner

Frequency range ........................................ 87.5 108 MHz


Usable sensitivity ........................................................ 9 dBf
(0.8 V/75 , mono, S/N: 30 dB)
50 dB quieting sensitivity .......................................... 15 dBf
(1.5 V/75 , mono)
Signal-to-noise ratio ........................ 70 dB (IEC-A network)
Distortion ............................ 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 15,000 Hz (3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)

FM tuner

CD player

Continuous power output is 22 W per channel min. into 4


ohms, both channels driven 50 to 15,000 Hz with no more
than 5% THD.
Maximum power output ...................................... 50 W 4
Load impedance ............................ 4 (4 8 allowable)
Preout maximum output level/
output impedance .................................... 6.5 V/100
Loudness contour ........ +10 dB (100 Hz), +6.5 dB (10 kHz)
(volume: 30 dB)
Equalizer (13-Band Graphic Equalizer)
Frequency .................. 50/80/125/200/315/500/800 Hz
1.25/2/3.15/5/8/12.5 kHz
Equalization Range ................................ 12 dB (2 dB)
Auto Equalizer (Just for standard mode)
(Front & Rear & Subwoofer 13-Band Graphic)
Frequency .................. 50/80/125/200/315/500/800 Hz
1.25/2/3.15/5/8/12.5 kHz
Equalization Range ...................... +6 12 dB (2 dB)
Network (Standard mode)
HPF (Front/Rear)
Frequency .......................... 50/63/80/100/125 Hz
Slope ................................................ 12 dB/oct.
Subwoofer output
Frequency .......................... 50/63/80/100/125 Hz
Slope ................................................ 18 dB/oct.
Gain .............................. 24 dB +6 dB (1 dB)
Phase .......................................... Normal/Reverse
Network (3-way network mode)
HIGH HPF
Frequency
..............1.6/2/2.5/3.15/4/5/6.3/8/10/12.5/16 kHz
Slope ............................................ 6/12 dB/oct.
Gain ........................ 24 dB 0 dB/Mute (1 dB)
Phase .......................................... Normal/Reverse

MID HPF/LPF
Frequency (LPF)
..............1.6/2/2.5/3.15/4/5/6.3/8/10/12.5/16 kHz
Frequency (HPF)
................31.5/40/50/63/80/100/125/160/200 Hz
Slope (LPF) .................... 0 (Pass)/6/12 dB/oct.
Slope (HPF) ............ 0 (Pass)/6/12/18 dB/oct.
Gain ........................ 24 dB 0 dB/Mute (1 dB)
Phase .......................................... Normal/Reverse
LOW LPF
Frequency
................31.5/40/50/63/80/100/125/160/200 Hz
Slope .................................... 6/12/18 dB/oct.
Gain ...................... 24 dB +6 dB/Mute (1 dB)
Phase .......................................... Normal/Reverse

Audio/DSP

Power source .............. 14.4 V DC (10.8 15.1 V allowable)


Grounding system .......................................... Negative type
Max. current consumption ........................................ 10.0 A
Backup current ..........................................Less than 6 mA
Dimensions
(DIN) (chassis) ...... 178 (W) 50 (H) 157 (D) mm
(nose) ............ 188 (W) 58 (H) 24 (D) mm
(D) (chassis) ...... 178 (W) 50 (H) 162 (D) mm
(nose) ............ 170 (W) 45 (H) 19 (D) mm
Weight ...................................................................... 1.7 kg

General

Specifications(DEH-P9450MP/ES)

5
8

2. EXPLODED VIEWS AND PARTS LIST


NOTES : Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List.
Screw adjacent to mark on the product are used for disassembly.
For the applying amount of lobricants or glue, follow the instructions in this manual.
(In the case of no amount instructions,apply as you think it appropriate.)
"

2.1 PACKING(DEH-P940MP,P9400MP)
25
19

16

26

27

20

23 23 22
24

33

21

29

5 6
34 36

35
31

30
B

32

8
28

15
1

14

17
10

13
9

11

10

11
12

18

DEH-P940MP/UC

6
1

PACKING(DEH-P940MP,P9400MP) SECTION PARTS LIST


Mark No.
*
*

*
*
*

Description

Part No.

Mark No.

Description

Part No.

Cord Assy

CDE6563

17

2
3
4
5

Accessory Assy
Screw
Screw Assy
Handle

CEA2430
CBA1002
CEA2433
CNC5395

Carton(P940MP)
Carton(P9400MP)

CHG4675
CHG4673

18
19
20
21

Contain Box(P940MP)
Contain Box(P9400MP)
Remote Control Assy
Screw Assy
Polyethylene Bag

CHL4675
CHL4673
CXB9202
CZE3169
CEG-127

22
23
24
25
26

Hexagonal Wrench
Screw
Belt
Holder Assy
Holder Assy

CZE3176
RMZ30H060FBK
CZN7661
CZX3172
CZX3173

27
28
29
30
31

Remote Control Assy


Microphone Assy
Spring
Screw
Screw

CZX3257
CPM1054
CBH-865
BMZ50P060FMC
CMZ50P060FMC

32
33
34
35
36

Polyethylene Bag
Strap
Nut
Screw(M2x6)
Screw

CEG-127
CNC5402
NF50FMC
CBA1120
CBA-102

6
7
8-1
8-2

Bush
Polyethylene Bag
Polyethylene Bag
Owner's Manual(P940MP)
Owner's Manual(P9400MP)

CNV1917
CEG-158
CEG1116
CRD3588
CRD3590

8-3
8-4
8-5
8-6

Installation Manual(P940MP)
Installation Manual(P9400MP)
Caution Card
Warranty Card(P940MP)
Card(P9400MP)

CRD3589
CRD3591
CRP1244
CRY1070
ARY1048

9
10
11
12
13

Polyethylene Bag
Protector
Protector
Protector
Protector

CEG1185
CHP2383
CHP2384
CHP2430
CHP2386

14
15
16

Sub Carton
Case Assy
Battery

CHA3167
CXB3520
CEX1030

*
*
*

Owner's Manual,Installation Manual


Part No.

Language

CRD3588

English,French

CRD3589

English,French

CRD3590

English,French

CRD3591

English,French
C

DEH-P940MP/UC
5

7
7

2.2 PACKING(DEH-P9450MP)
25
19

16

26

27

20
2

23 23 22
24

21
29
5 6
4

3
31
30
7

32

8
28

15
1

14

17
10

13
9

10

11

11
12

18

DEH-P940MP/UC

8
1

PACKING(DEH-P9450MP) SECTION PARTS LIST


Mark No.

*
*

Description

Mark No.

Part No.

Cord Assy

CDE6563

2
3
4
5

Accessory Assy
Screw
Screw Assy
Handle

CEA2948
CBA1002
CEA2941
CNC5395

6
7
8-1
8-2
8-3

Bush
Polyethylene Bag
Polyethylene Bag
Owner's Manual
Owner's Manual

CNV1917
CEG-158
CEG1116
CRB1754
CRD3592

8-4
8-5
8-6
9
10

Owner's Manual
Installation Manual
Caution Card
Polyethylene Bag
Protector

CRD3593
CRD3594
CRP1244
CEG1305
CHP2383

11
12
13
14

Protector
Protector
Protector
Sub Carton

CHP2384
CHP2430
CHP2386
CHA3167

*
*
*

Description

Part No.

15

Case Assy

CXB3520

16
17
18
19
20

Battery
Carton
Contain Box
Remote Control Assy
Screw Assy

CEX1030
CHG4674
CHL4674
CXB9202
CZE3169

21
22
23
24
25

Polyethylene Bag
Hexagonal Wrench
Screw
Belt
Holder Assy

CEG-127
CZE3176
RMZ30H060FBK
CZN7661
CZX3172

26
27
28
29
30

Holder Assy
Remote Control Assy
Microphone Assy
Spring
Screw

CZX3173
CZX3257
CPM1054
CBH-865
BMZ50P060FMC

31
32

Screw
Polyethylene Bag

CMZ50P060FMC
CEG-127

Owner's Manual,Installation Manual


Part No.

Language

CRB1754

English

CRD3592

English,Spanish

CRD3593

Portuguese(B),Arabic

CRD3594

English,Spanish,Portuguese(B),Arabic

DEH-P940MP/UC
5

9
7

2.3 EXTERIOR(1)(DEH-P940MP,P9400MP)

71

70

DEH-P940MP/UC

10
1

(1) EXTERIOR(1)(DEH-P940MP,P9400MP) SECTION PARTS LIST


Mark No.

Description

Mark No.

Part No.

Panel Assy

CXB6738

2
3
4
5

Screw(M2x2.5)
Grille Unit
Button(RESET)
Button Unit

CBA1447
See Contrast table(2)
CAC7493
See Contrast table(2)

6
7
8
9
10

Button(PRESET)
Button(SRC)
Lighting Conductor
Button(EJECT)
Lighting Conductor

See Contrast table(2)


CAC7491
CNV7051
See Contrast table(2)
CNV7050

11
12
13
14
15

Button(BAND)
Keyboard Unit
Badge
Cover Unit
Screw

CAC7492
CWM8231
See Contrast table(2)
CXB9308
BPZ20P080FZK

16
17
18
19
20

Detach Grille Assy


Knob Unit
OEL Module
Spacer
Cushion

See Contrast table(2)


See Contrast table(2)
MXK8019
CNM7529
CNM7809

21
22
23
24
25

Connector
Lighting Conductor
Spacer
Connector(CN1901)
Connector(CN1902)

CDE6741
CNV7052
CNM7409
CKS4435
CKS3995

26
27
28
29
30

Screw
Screw
Screw(M2x7)
Screw(M2x3)
Screw(M2x3)

BMZ20P030FMC
BPZ20P060FMC
CBA1060
CBA1061
CBA1154

31
32
33
34
35

Screw(M2x1.5)
Screw(M1.4x4)
Screw(M2x1.5)
Spring
Cord

CBA1430
CBA1454
CBA1528
CBH2445
CDE5856

36

Cord

CDE5960

Description

Part No.

37
38
39
40

Mini-Jack
Connector
Frame
Spacer

CKN1015
CKS4436
CNC8201
CNM6155

41
42
43
44
45

Spacer
Spacer
PCB
PCB
PCB

CNM6156
CNM7427
CNP5341
CNP5941
CNP6124

46
47
48
49
50

Guide
Rack
Gear
Gear
Gear Unit

CNV5696
CNV5697
CNV5698
CNV5761
CNV5762

51
52
53
54
55

Cover
Holder
Switch(S951)
Switch(S952)
Arm Unit

CNV6573
CNV6575
CSN1012
CSN1022
CXB3574

56
57
58
59
60

Bracket Unit
Arm Unit
Holder Unit
Frame Unit
Motor

CXB3577
CXB3866
CXB6726
CXB6727
CXM1085

61
62
63
64
65

Washer
Washer
Panel
Lighting Conductor
Cover

2-1816-0035-D2-00
2-1821-0045-D2-00
CNS6397
CNV6574
CNM6489

66
67
68
69
70

Holder
Panel
Remote Control Assy
Cover
Grille Unit(Service)

CNC8659
See Contrast table(2)
CZX3257
CZN7655
See Contrast table(2)

71

Spacet

CNM7959

(2) CONTRAST TABLE


DEH-P940MP/UC and DEH-P9400MP/UC are constructed the same except for the following:
Mark

NO

Symbol and Description

DEH-P940MP/UC

DEH-P9400MP/UC

Grille Unit

CXB8550

CXB9470

Button Unit

CXB9378

CXB9385

Button(PRESET)

CAC7497

CAC7495

Button(EJECT)

CAC7496

CAC7494

13

Badge

CAH1755

CAH1754

16

Detach Grille Assy

CXB8488

CXB8489

17

Knob Unit

CXB9377

CXB8551

67

Panel

CNS6360

CNS6989

70

Grille Unit(Service)

CXX1618

CXX1617

DEH-P940MP/UC
5

11
7

2.4 EXTERIOR(2)(DEH-P940MP,P9400MP)

A
C

DEH-P940MP/UC

12
1

EXTERIOR(2)(DEH-P940MP,P9400MP) SECTION PARTS LIST


Mark No.

Description

Mark No.

Part No.

Description

Part No.

Tuner Amp Unit(P940)

CWM8223

49

Holder

CND1075

2
3
4

Tuner Amp Unit(P9400)


Antenna Cable
Cord Assy
Chassis Unit

CWM8224
CDH1308
CDE6784
CXB9285

50
51

Connector(CN701)
Sheet

CKS3918
CNM7910

5
6
7
8
9

Insulator
Screw
Screw
Screw
Fan Motor

CNM7773
BSZ30P200FMC
BMZ26P080FMC
ISS26P055FUC
CXM1194

10
11
12
13
14

Holder
CNC9299
Screw(M2.6x14)
CBA1384
Screw
BSZ30P050FMC
CD Mechanism Module(S9MP3) CXK5557
Cord Assy
CDE7019

15
16
17
18
19

Connector
Screw
Holder
Cushion
Cap

CDE6556
BSZ26P060FMC
CNC6469
CNM4870
CNV6727

20
21
22
23
24

Case Unit
Cord Assy
Fuse(10A)
Cap
Resistor

CXB8974
CDE6563
CEK1136
CNS1472
RS1/2PMF102J

25
26
27
28
29

FM/AM Tuner Unit


Holder
DSP Unit
Terminal(CN452)

CWE1563
CNC8815
CWM8229
CKF1059

30
31
32
33
34

Heat Sink
Screw
Holder
IC(IC301)
Holder

CNR1590
BMZ26P160FMC
CNC9291
PAL007A
CNC9295

35
36
37
38
39

Holder
Connector(CN1501)
Insulator
Plug(CN901)
Connector(CN351)

CNC9296
CKS4452
CNM7181
CKM1278
CKS3606

40
41
42
43
44

Clamper
Connector(CN591)
Plug(CN101)
Pinjack(CN451)
Connector(CN801)

CEF1008
CKS4571
CKS1058
CKX1046
CKS1536

45
46
47
48

Plug(CN851)
Connector(CN251)
Plug(CN702)
Plug(CN131)

CKS-786
CKS4453
CKS-787
CKS-784

DEH-P940MP/UC
5

13
7

2.5 EXTERIOR(1)(DEH-P9450MP)

71

70

DEH-P940MP/UC

14
1

EXTERIOR(1)(DEH-P9450MP) SECTION PARTS LIST


Mark No.

Description

Mark No.

Part No.

Panel Assy

CXB6738

2
3
4
5

Screw(M2x2.5)
Grille Unit
Button(RESET)
Button Unit

CBA1447
CXB8547
CAC7493
CXB9378

6
7
8
9
10

Button(PRESET)
Button(SRC)
Lighting Conductor
Button(EJECT)
Lighting Conductor

CAC7497
CAC7491
CNV7051
CAC7496
CNV7050

11
12
13
14
15

Button(BAND)
Keyboard Unit
Badge
Cover Unit
Screw

CAC7492
CWM8231
CAH1754
CXB9308
BPZ20P080FZK

16
17
18
19
20

Detach Grille Assy


Knob Unit
OEL Module
Spacer
Cushion

CXB8490
CXB9377
MXK8019
CNM7529
CNM7809

21
22
23
24
25

Connector
Lighting Conductor
Spacer
Connector(CN1901)
Connector(CN1902)

CDE6741
CNV7052
CNM7409
CKS4435
CKS3995

26
27
28
29
30

Screw
Screw
Screw(M2x7)
Screw(M2x3)
Screw(M2x3)

BMZ20P030FMC
BPZ20P060FMC
CBA1060
CBA1061
CBA1154

31
32
33
34
35

Screw(M2x1.5)
Screw(M1.4x4)
Screw(M2x1.5)
Spring
Cord

CBA1430
CBA1454
CBA1528
CBH2445
CDE5856

36
37
38
39
40

Cord
Mini-Jack
Connector
Frame
Spacer

CDE5960
CKN1015
CKS4436
CNC8201
CNM6155

41
42
43
44
45

Spacer
Spacer
PCB
PCB
PCB

CNM6156
CNM7427
CNP5341
CNP5941
CNP6124

46
47
48
49
50

Guide
Rack
Gear
Gear
Gear Unit

CNV5696
CNV5697
CNV5698
CNV5761
CNV5762

Description

Part No.

51
52
53
54
55

Cover
Holder
Switch(S951)
Switch(S952)
Arm Unit

CNV6573
CNV6575
CSN1012
CSN1022
CXB3574

56
57
58
59
60

Bracket Unit
Arm Unit
Holder Unit
Frame Unit
Motor

CXB3577
CXB3866
CXB6726
CXB6727
CXM1085

61
62
63
64
65

Washer
Washer
Panel
Lighting Conductor
Cover

2-1816-0035-D2-00
2-1821-0045-D2-00
CNS6397
CNV6574
CNM6489

66
67
68
69
70

Holder
Panel
Remote Control Assy
Cover
Grille Unit(Service)

CNC8659
CNS6360
CZX3257
CZN7655
CXX1615

71

Spacer

CNM7959

DEH-P940MP/UC
5

15
7

2.6 EXTERIOR(2)(DEH-P9450MP)

A
C

DEH-P940MP/UC

16
1

EXTERIOR(2)(DEH-P9450MP) SECTION PARTS LIST


Mark No.

Description

Mark No.

Part No.

Tuner Amp Unit

CWM8225

2
3
4
5

Antenna Cable
Cord Assy
Chassis Unit
Insulator

CDH1308
CDE6784
CXB9285
CNM7773

6
7
8
9
10

Screw
Screw
Screw
Fan Motor
Holder

BSZ30P200FMC
BMZ26P080FMC
ISS26P055FUC
CXM1194
CNC9299

11
12
13
14
15

Screw(M2.6x14)
CBA1384
Screw
BSZ30P050FMC
CD Mechanism Module(S9MP3) CXK5557
Cord Assy
CDE7019
Connector
CDE6556

16
17
18
19
20

Screw
Holder
Cushion
Cap
Case Unit

BSZ26P060FMC
CNC6469
CNM4870
CNV6727
CXB8974

21
22
23
24
25

Cord Assy
Fuse(10A)
Cap
Resistor
FM/AM Tuner Unit

CDE6563
CEK1136
CNS1472
RS1/2PMF102J
CWE1563

26
27
28
29
30

Holder
DSP Unit
Terminal(CN452)

Heat Sink

CNC8815
CWM8229
CKF1059

31
32
33
34
35

Screw
Holder
IC(IC301)
Holder
Holder

BMZ26P160FMC
CNC9291
PAL007A
CNC9295
CNC9296

36
37
38
39
40

Connector(CN1501)
Insulator
Plug(CN901)
Connector(CN351)
Clamper

CKS4452
CNM7181
CKM1278
CKS3606
CEF1008

41
42
43
44
45

Connector(CN591)
Plug(CN101)
Pinjack(CN451)
Connector(CN801)
Plug(CN851)

CKS4571
CKS1058
CKX1046
CKS1536
CKS-786

46
47
48
49
50

Connector(CN251)
Plug(CN702)
Plug(CN131)
Holder
Connector(CN701)

CKS4453
CKS-787
CKS-784
CND1075
CKS3918

51

Description
Sheet

Part No.
CNM7910

CNR1590
C

DEH-P940MP/UC
5

17
7

2.7 CD MECHANISM MODULE

DEH-P940MP/UC

18
1

CD MECHANISM MODULE SECTION PARTS LIST


Mark No.

Description

Mark No.

Part No.

CD Core Unit(S9MP3)

CWX2619

2
3
4
5

Connector(CN901)
Connector(CN101)
Screw
Screw

CKS4190
CKS3486
BMZ20P025FMC
BSZ20P040FMC

6
7
8
9
10

Screw(M2x4)
Screw(M2x3)
Screw
Washer
Washer

CBA1362
CBA1527
CBA1545
CBF1037
CBF1038

11
12
13
14
15

Washer
Washer
Spring
Spring
Spring

CBF1039
CBF1060
CBH2378
CBH2379
CBH2514

16
17
18
19
20

Spring
Spring
Spring
Spring
Spring

CBH2533
CBH2382
CBH2383
CBH2384
CBH2527

21
22
23
24
25

Spring
Spring
Spring
Spring
Spring

CBH2386
CBH2537
CBH2390
CBH2391
CBH2523

26
27
28
29
30

Spring
Spring
Spring
Spring
Shaft

CBH2426
CBH2444
CBL1561
CBL1553
CLA3845

31
32
33
34
35

Roller
Frame
Lever
Lever
Arm

CLA3910
CNC9654
CNC9664
CNC8949
CNC9661

36
37
38
39
40

Arm
Arm
Bracket
Frame
Belt

CNC9016
CNC9017
CNC9123
CNC9656
CNT1086

41
42
43
44
45

Gear
Gear
Gear
Gear
Gear

CNV6886
CNV6316
CNV6317
CNV6318
CNV6319

46
47
48
49

Gear
Arm
Arm
Arm

CNV6320
CNV6322
CNV6323
CNV6324

Description

Part No.

50

Arm

CNV6888

51
52
53
54
55

Arm
Guide
Arm
Guide
Rack

CNV6889
CNV6327
CNV6924
CNV6921
CNV6923

56
57
58
59
60

Clamper
Arm
Guide
Cover
Arm

CNV6331
CNV6332
CNV6333
CNV6334
CNV6335

61
62
63
64
65

Guide
Roller
Damper
Damper
Guide

CNV6336
CNV6338
CNV6175
CNV6662
CNV6925

66
67
68
69
70

Chassis Unit
Arm Unit
Arm Unit
Arm Unit
Motor Unit(M2)

CXB7980
CXB7983
CXB7984
CXB7985
CXB5903

71
72
73
74
75

Screw Unit
Gear Unit
Bracket Unit
Motor Unit(M1)
Arm Unit

CXB5904
CXB8076
CXB7982
CXB6007
CXB8504

76
77
78
79
80

Screw(M2x5)
Screw
Screw
Washer
Washer

EBA1028
JFZ20P020FMC
JGZ17P020FZK
YE15FUC
YE20FUC

81
82
83
84
85

Pickup Unit(Service)(P9MP3)
Screw
Guide
Roller
Spring

CXX1550
IMS26P030FMC
CNV6922
CNV6887
CBH2509

86
87
88
89

Spring
Spring
Collar
Connector(CN902)

CBH2512
CBH2536
CNV6906
CKS2195

DEH-P940MP/UC
5

19
7

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM


3.1 BLOCK DIAGRAM

A TUNER AMP UNIT

ASL AMP

VR141

MIC141

CN251

ASL FILTER

7
IC 141
NJM4558MD

IC 142
NJM4558MD

NOISE

TUL
BUS+L

A-EQ
LOUT

FM/AM TUNER UNIT


AMRF
ATT

ANT ADJ

49

27

A-EQ
MD/CD L
DOUT

COMP

IC1
MIXER, IF AMP, DET.

LDET

IC 601(1/2)
PD5750A

21
18

MCK

MCK

FMRF
CF202
IC 3
EEPROM

IMG ADJ AM 2ND IF X901


450kHz 10.25MHz

st

45

currq

43

STIND

SD

26
30

B.U

SYS+B

29
ASENBO

TUNPDO

40

Q101

SL

tunpce2

38

22

ASENBO
TX
RX

8
5
1
7

IC 101
HA12187FP

BUS2

TX

IPPW

RX

46

36

30

36

MUTERQ

40

LOCH
LOCL

IP-BUS DRIVER

Q102

NOISE

TUNPCK

LOCL

74

SD

TUNPCE

ST

NL2

NL1

FMSD

13
SL

SL

SDBW

CE1

CK

PCE2

PCK

11 12 15 16
PCE1

NC
9

CE2

FMLOCL
24

DGND

CREQ
CREQ

LOCH

DI/DO

7 17 20 22 10 19 14

Q401

42

97

PDIO

25

NC

WC

LOCL

LOCH
23

NC

VDD
VCC

RF ADJ

IP-BUS

20
28

ATT

27
RFGND
26

CN101

11

6
48

TUL
BUS+L

6
R ch

FMANT

15

NOISE

SYSTEM
CONTROLLER

L ch

IC 2 FM MPX

18

DSPPW

28

AMANT

MPXREF 41kHz
AMDET

MUTERQ

ANT

FM/AM 1ST IF 10.7MHz


T51 Q51 CF51 CF52 CF53

37
12

IPPW

BUS1
BUS+L

DSPPW

CN451

DOUT

CN1501
39
14

CN702
IC 202
MSM51V4265EP-70TS

CN902
MCK

DRAM

DOUT

PU UNIT(SERVICE)(P9MP3)
CN101

LASER
DIODE

LDMD

142

15

Q101
141

FOCUS ACT.
MONITOR TRACKING ACT.
DIODE

XTAL1
LD

IC 201
UPD63760GJ

LD+

1
4

CN701

CN901
LOUT

LOUT 35

13

11

LOUT

LOUT

Q602

MUTE

Q603

FOP
TOP

MICSENS

TD/FD

14

42

WINT,
WAIT,
RFOK

SD/MD

16
SOP
15
SOM
18
LCOP
17
LCOM

LOAD/CARRIAGE
MOTOR M

XWINT,
XWAIT,
FOK
LOEJ

22

CONT 9

31
29

IC 301
BA5996FM

TC74VHCT08AFT

bsens

CDMUTE 33

TELIN

isens

LOEJ

P-BUS
CONT

80
28

VD

23

22

VD

15

VDCONT

SYSPW

IC 501
UPD61002GC

CD3VON

VDCONT 27

1
4

IC 502
BA25BC0WFP

3VDD

5VDD

+2.5V REGULATOR

37

7 DO1

HOME

WMA DECODER

SP641
BUZZER

+3.3V REGULATOR
V2R5

23
11

BDATA,BSCK,BSRQ,BRXEN,BRST

VD

DSCSNS

12EJ
DISC
CLAMP SENSE 8EJ SENSE
SENSE
SENSE

74

20

IC 701
PE5269A

CD CONTROLLER
78

S901
HOME

asens

IC 702

CD
DRIVER

43

X202

12
FOP
13
TOP
SPINDLE
MOTOR

DOUT

RF-AMP,CD DECODER,
MP3 DECODER,
DIGITAL SERVO / DATA PROCESSOR

F,E
FO+
TO+

MCK

PD

AC,BD

HOLOGRAM
UNIT

38

V3R3A

MCK

4,5

IC 703

10

21

SYSTEM
CONTROLLER
24

VDD

PEE

S-818A33AUC-BGN

IC 601(2/2)
PD5750A
MUTE

27

1
V3R3A

IC 203
BA033SFP

dsens

VD

+3.3V REGULATOR

KYDT

AUTO EQUALIZER
Q133

DPDT

A-EQ

F CD CORE UNIT(S9MP3)

CN131

10

MICSEN

1
2

RESET

72
36
35

12

MICSENS

Q131

3
3

Q132

EQ PCB

VDD

44

M951
AUTOMATIC
FLAP MOTOR

SWITCH
PCB

CN851

M
5

14

4
S951
CLOSE
S952
OPEN

BLUE
RED
WHITE

3
2

FLAP MOTOR
CONTROL
3

OUT1

OEL PW

OUT2

FLPOPN

11

FLPCLS

Q853

78
79

FCLSSW

82

FOPNSW

81

DEH-P940MP/UC

20
1

80

FLPPW

5
6

91

B.U

FLPPW
4

IC 851 FIN
BA6288FS FIN

57

DALMON

Q851
Q852

FLPILM

DALMON

ILMPW

56

FLPOPN
FLPCLS
FCLSSW
FOPNSW

SWVDD

34

A
CN251
NOISE
TUL
BUS+L

X1502

CN1501
39

37

14

12

18

15

11

NOISE
TUL

40

16

AM

BUS+L

A-EQ

17

phone+

3
A-EQ
LOUT
DOUT

6
48

20
28

E-VOL
/ SOURCE
SELECTOR

CassL
MPX-RDS

MD/CD L
DOUT

39
43

RR

54

FR

AOUTR2

INPUT FILTER
IC 1602
NJM4558MD

44

Out1L

IC 1601
PML011A
(1/2)

35

DSP
IC 1502
PDG267A

LIN

AOUTR3
AOUTL2
AOUTL3
AOUTL1

LRCK
76

SI1
71

3
1Y

6
2Y

DOUT

AOUTR1

38

B DSP UNIT

RL

52

FL

27

SWL

29

SWR

14
5

OUT

74

10

NOISE

61

MCKOUT

MCKOUT

X1501
12

FR

VDD

DSP COM
IC 1501
PD5762A
MICSENS

IC 1601
PML011A
(2/2)

RL

7
1

34

35

SWL

VDD

D3V

27

29

FR, RR ch
IC 1603
NJM4558MD

37

SWR

25

38
36

FL 39

42

ROTA

51

9
dsens

DSPPW

MUTERQ

43

reset

40

E-VOL
/ SOURCE
SELECTOR

RR

50

ROTB

D3V

FL, RL ch
IC 1605
NJM4558MD

SWL, SWR ch
IC 1604
NJM4558MD

FL

27

IC 1504
TC74VHC126FT

RL

49

BUFFER

2A

MCK OUTPUT
IC 1503
TC7S08FU

SWL

MCK

MCK

CN1501
33

47

34

48 49

43

30

36

44

41

43

29

42

28 27

33

21

23

25

Q253
1

IC 251
BA033FP

FL

SWL

MICSENS

CN251

Q722
VD

B.U
3

VDD

D3V

DSP5V

reset

dsens

DSPPW

DSP 3.3V
REGULATOR

VDD2

RL

35

D ROTB

32

ROTA

36

MUTERQ

46

B.U

Q721
VDCONT

CN901

Q251

BACKUP

B.U

2
14

IC 301
PAL007A

FL

STBY

B.REM

22

25
SYSPW

MUTE

FL

RL

SWL
asens

POWER AMP

RL

12

23

RL

21

RL+

FL

FL+

B.REM

10A

BACKUP

GND
RL

9
11
10

RL+
FL
FL+

12

B.REM

Q932
isens

ILL

asens

bsens

Q931

ACC

ILL
3

ACC

B.U

74

Q951
20

isens

23

TELIN

TELIN

MUTERQ

bsens

11

11

IN1

IN5

CN351

IN3

FL

OUT3

16

OUT5

37

HIGH OUT

RL

14

OUT1 18

C
REAR
L CH

Q353

VDD
REGULATOR

Q911
VDD

Q301

B.U

41
ER

SYSTEM
CONTROLLER
24

Q921

MUTE

SUB
WOOFER
L CH

11

Q351

10

27

dsens

CN801

72

CN1901

DSENS 16

36

KYDT

35

DPDT

B
10

RESET

12

1
B.U

MICSENS

RESET
IC 961
S80835ANUP-EDZ

IC 1903

VDD

VDD
RST1

Q962

FLPILM

C
D

57

Q805

79
82
81

FLPPW

B.U
ILMPW

ROTA

ROTB

12

15

11

10

29

11

30

KYDT
DSPDT

56

Q804

OELB

OEL+B
REGULATOR

ILB

15

13

11

Q806

FL12ON
90

SWVDD

SWVDD

25

IC 1905
PD8093A
Q1903

34

Q802

IC 801
NJU7223DL1-33

12V REG
(FLASH)
SWDVDD3

SWDVDD5
39

VDD2

FCLSSW

ILB

Q801

FLPCLS

Q1901

FONT ROM

13

SWDVDD3

Q807

IC 1902
PD5758A

X1901

3
5

REM
89
STBY

SWDVDD3

IC1908

S1918

DISPLAY
COM

Q1902

Q803

FLPOPN

FOPNSW

RESET
12

VOLUME
5

91

Q752

IC 1906
PD6380A

OPT IN

10
RESET

OEL18

78

12

IC 1901
RS-140

ILM+B
REGULATOR
80

13

B.U

DALMON
OEL PW

S-80826ANUP-EDP

DSENS

S1917
RESET

FLAP
ILLUMI.

44

SWDVDD5
SWDVDD3

IC1909
KYDT
DPDT

DALMON

FLASH MEMORY

Q923
SYS+B
REGULATOR

Q912

REMOTE CONTROL
SENSOR

IC1908:TC7S08FU
IC1909:TC7SET08FU
MUTE

DALMON

B.U

IC 601(2/2)
PD5750A
Q981

B.U

C KEYBOARD UNIT

Q980

Q922

SYS+B
PEE

VDD2

SWL

MUTE

5V
REGULATOR

Q751
B.U

4
SYSPW

18 17

16

D19091917,1919

KEY MATRIX

OEL CONTROLLER
IC 1907
PD3430A

ILB

1-9

CN1902
OEL MODULE
MXK8019

DEH-P940MP/UC
5

MUTE

IC 271
PA2028A
SYSPW

FRONT
L CH

Q352

TEL1

RCA OUT

21
7

3.2 OVERALL CONNECTION DIAGRAM(DEH-P940MP,P9400MP)(GUIDE PAGE)


Note: When ordering service parts, be sure
to refer to " EXPLODED VIEWS AND PARTS LIST" or
FAN
MOTOR
"ELECTRICAL PARTS LIST".
CXM1194

A-a

R120
0R0
R118

FAN MOTOR REG.

VD REG.

0R0
R117
0R0
R119

0R0

R106

0R0

IP-BUS
DRIVER

A-EQ

EQ PCB
CN4602

CN902

A-a

CN901

CD(analog):+0.09dBs

Large size
SCH diagram

A-b

B
A-a

A-b

Guide page

DSP 3.3V REG.

Detailed page

18P

FM/AM TUNER UNIT

A-a

A-b

PD5750A
SYSTEM CONTROLLER

ANTENNA

3
1
2

FLAP MOTOR REG.

SWVDD

MOTOR
DRIVER

M951 M
AUTOMATIC
FLAP MOTOR
CXM1085

A D E

S951
CSN1012
S952
CSN1022

CLOSE
OPEN

E
SWITCH
PCB

DEH-P940MP/UC

22
1

CN1901

A-b
B

TUNER AMP UNIT


A

CN1501

P9400MP

P940MP

P9400MP

Q351-353

HN1C03F

IMH3A

R363-368

10K

ISS396

HI-OUT

R364

P940MP

SUB
WOOFER
L CH
SUB
WOOFER
R CH

CD(analog):+0.09dBs

FRONT
L CH

FM(100%): +9.9dBs
AM(30%): -0.6dBs
IP-BUS:+15.5dBs
CD:+15.39dBs
(P9400MP)

FRONT
R CH
REAR
L CH

FM(100%): +12.9dBs
AM(30%): +2.4dBs
IP-BUS:+18.5dBs
CD:18.39dBs
(P940MP)

REAR
R CH

B
DSP 3.3V REG.
MUTE

18P

RESET

5V REG.

PD5750A

>
CEK1136
10A
BACKUP

SYSTEM CONTROLLER

GND

SYS+B REG.

ILL
B.REM

ACC

TEL
RL

VDD REG.

FL
RL+
FL+

DSP
MODE
SW

RR
FR
RR+
FR+

SENSE

FM(100%):+28dBs
AM(30%):+18dBs
IP-BUS:+34dBs
CD:+34dBs

MUTE

OEL+B REG.

TEL MUTE

SWVDD

ASL

ILM+B REG.

D
NOTE :
Symbol indicates a resistor.
No differentiation is made between chip resistors and
discrete resistors.
Symbol indicates a capacitor.
No differentiation is made between chip capacitors and
discrete capacitors.

901

Decimal points for resistor


and capacitor fixed values
are expressed as :
2.2 2R2
0.022 R022

The > mark found on some component parts indicates


the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.

DEH-P940MP/UC
5

23
7

24

EQ PCB

CN4602

A-a D

TUNER UNIT

IP-BUS
DRIVER

0R0

0R0
R119

R117

0R0

0R0
R118

R120

FAN
MOTOR

A-EQ

CXM1194

C
FAN MOTOR REG.

A-a A-b

VD REG.

CN902

CN901

DSP 3.3V REG.

CD(analog):+0.09dBs

A-b

3
18P

1
3
4

DEH-P940MP/UC

R106

0R0

ANTENNA

FM/AM TUNER UNIT

3
1

6
A-a A-b

M951 M
AUTOMATIC
FLAP MOTOR
CXM1085

SWITCH
PCB

MOTOR
DRIVER

FLAP MOTOR REG.

CN1901

18P

A-b

SWVDD

SYSTEM CONTROLLER

PD5750A

6
7

CLOSE
OPEN
S951
CSN1012
S952
CSN1022

5
8

DEH-P940MP/UC

A-a E

25

B
CN1501

RESET

A-a A-b

26

FM(100%): +12.9dBs
AM(30%): +2.4dBs
IP-BUS:+18.5dBs
CD:18.39dBs
(P940MP)

FM(100%): +9.9dBs
AM(30%): -0.6dBs
IP-BUS:+15.5dBs
CD:+15.39dBs
(P9400MP)

HI-OUT

ISS396

B
MUTE

P940MP

IMH3A
0

10K

R363-368

R364

P9400MP

P940MP
HN1C03F

Q351-353

TUNER AMP UNIT

P9400MP

REAR
R CH

REAR
L CH

FRONT
R CH

FRONT
L CH

SUB
WOOFER
L CH
SUB
WOOFER
R CH

DSP 3.3V REG.

CD(analog):+0.09dBs

A-b

18P

1
3
4

DEH-P940MP/UC

18P

DSP
MODE
SW

6
ILM+B REG.

OEL+B REG.

Decimal points for resistor


and capacitor fixed values
are expressed as :
2.2 2R2
0.022 R022

TEL MUTE

SENSE

FM(100%):+28dBs
AM(30%):+18dBs
IP-BUS:+34dBs
CD:+34dBs

FR+

RR+

FR

RR

FL+

RL+

FL

RL

TEL

ACC

The > mark found on some component parts indicates


the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.

VDD REG.

ILL

GND

B.REM

DEH-P940MP/UC

A-a A-b

NOTE :
Symbol indicates a resistor.
No differentiation is made between chip resistors and
discrete resistors.
Symbol indicates a capacitor.
No differentiation is made between chip capacitors and
discrete capacitors.

ASL

MUTE

SYS+B REG.

CEK1136
10A
BACKUP

>

A-b

SWVDD

SYSTEM CONTROLLER

D5750A

5V REG.

5
8

27

3.3 OVERALL CONNECTION DIAGRAM(DEH-P9450MP)(GUIDE PAGE)


Note: When ordering service parts, be sureCXM1194
to refer to " EXPLODED VIEWS AND PARTS LIST" or
"ELECTRICAL PARTS LIST".
FAN

A-a

MOTOR

R120
0R0
R118

FAN MOTOR REG.

VD REG.

0R0
R117
0R0
R119

IP-BUS
DRIVER

0R0

R106

0R0

A-EQ

EQ PCB
CN4602

CN902

A-a

A-b

CN901

CD(analog):+0.09dBs

Large size
SCH diagram

B
A-a

A-a

A-b

A-b

Guide page

DSP 3.3V REG.

Detailed page

R018

1R6K

1R6K

R018

2R7K

18P

FM/AM TUNER UNIT

2R7K

PD5750A
SYSTEM CONTROLLER

ANTENNA

3
1
2

FLAP MOTOR REG.

SWVD

MOTOR
DRIVER

M951 M
AUTOMATIC
FLAP MOTOR
CXM1085

A D E

S951
CSN1012
S952
CSN1022

CLOSE
OPEN

E
SWITCH
PCB

DEH-P940MP/UC

28
1

CN1901

A-b
B

TUNER AMP UNIT

CN1501

ISS396

HI-OUT

HN1C03F

10K
10K

SUB
WOOFER
L CH
SUB
WOOFER
R CH

HN1C03F

CD(analog):+0.09dBs

FRONT
L CH

FM(100%): +12.9dBs
AM(30%): +2.4dBs
IP-BUS:+18.5dBs
CD:+18.39dBs

10K

10K

FRONT
R CH
REAR
L CH
REAR
R CH

HN1C03F

B
DSP 3.3V REG.
MUTE

10K

10K

18P

RESET

5V REG.

PD5750A

>
CEK1136
10A

SYSTEM CONTROLLER

BACKUP

GND

SYS+B REG.

ILL

B.REM
ACC

TEL
RL

VDD REG.

FL
RL+
FL+

DSP
MODE
SW

RR
FR
RR+
FR+

SENSE

FM(100%):+28dBs
AM(30%):+18dBs
IP-BUS:+34dBs
CD:+34dBs

MUTE

OEL+B REG.

TEL MUTE

SWVDD

ASL

ILM+B REG.

NOTE :
Symbol indicates a resistor.
No differentiation is made between chip resistors and
discrete resistors.
Symbol indicates a capacitor.
No differentiation is made between chip capacitors and
discrete capacitors.

01

Decimal points for resistor


and capacitor fixed values
are expressed as :
2.2 2R2
0.022 R022

The > mark found on some component parts indicates


the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.

DEH-P940MP/UC
5

29
7

CN4602

EQ PCB

TUNER UNIT

3
2R7K

2R7K

R018

R018

30
1R6K

A-a D
IP-BUS
DRIVER

0R0

0R0
R119

R117

0R0

0R0
R118

R120

A-EQ

CXM1194
FAN
MOTOR

FAN MOTOR REG.

A-a A-b

VD REG.

CN902

CN901

DSP 3.3V REG.

CD(analog):+0.09dBs

A-b

1R6K

18P

1
4

DEH-P940MP/UC

R106

0R0

ANTENNA

FM/AM TUNER UNIT

3
1

2R7K

6
A-a A-b

M951 M
AUTOMATIC
FLAP MOTOR
CXM1085

SWITCH
PCB

MOTOR
DRIVER

FLAP MOTOR REG.

CN1901

18P

A-b

SWVDD

SYSTEM CONTROLLER

PD5750A

6
7

CLOSE
OPEN
S951
CSN1012
S952
CSN1022

5
8

DEH-P940MP/UC

A-a E

31

B
CN1501

RESET

A-a A-b

32

2
FM(100%): +12.9dBs
AM(30%): +2.4dBs
IP-BUS:+18.5dBs
CD:+18.39dBs

HI-OUT

ISS396

B
MUTE

3
HN1C03F

HN1C03F

10K

10K

10K

HN1C03F

10K

10K

10K

TUNER AMP UNIT

REAR
R CH

REAR
L CH

FRONT
R CH

FRONT
L CH

SUB
WOOFER
L CH
SUB
WOOFER
R CH

DSP 3.3V REG.

CD(analog):+0.09dBs

A-b

18P

1
3
4

DEH-P940MP/UC

18P

DSP
MODE
SW

6
ILM+B REG.

OEL+B REG.

Decimal points for resistor


and capacitor fixed values
are expressed as :
2.2 2R2
0.022 R022

TEL MUTE

SENSE

TEL

FM(100%):+28dBs
AM(30%):+18dBs
IP-BUS:+34dBs
CD:+34dBs

FR+

RR+

FR

RR

FL+

RL+

FL

RL

BACKUP

The > mark found on some component parts indicates


the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.

VDD REG.

ACC

B.REM

ILL

GND

DEH-P940MP/UC

A-a A-b

NOTE :
Symbol indicates a resistor.
No differentiation is made between chip resistors and
discrete resistors.
Symbol indicates a capacitor.
No differentiation is made between chip capacitors and
discrete capacitors.

ASL

MUTE

SYS+B REG.

CEK1136
10A

>

A-b

SWVDD

SYSTEM CONTROLLER

D5750A

5V REG.

5
8

33

3.4 DSP UNIT

DSP INPUT
FILTER

DSP INPUT
FM(100%):-16.4dBs
AM(30%):-26.9dBs
IP-BUS:-4.80dBs
CD:-4.91dBs

DSP

DSP OUTPUT
FM(100%):-14.0dBs
AM(30%):-24.5dBs
IP-BUS:-2.40dBs
CD:-2.51dBs

C
S
SE
/
DSP OUTPUT
FILTER

B
DEH-P940MP/UC

34
1

DSP UNIT
A

MCK

DSP COM

5V

3V

E-VOL OUTPUT
FM(100%):+2.40dBs
AM(30%): -8.10dBs
IP-BUS: +8.0dBs
CD:+7.89dBs

A CN251

C
SOURCE
SELECTOR
/ E-VOL
SELECTOR INPUT
FM(100%):-20.4dBs
AM(30%):-30.9dBs
IP-BUS: +2.2dBs
CD:+0.09dBs

B
DEH-P940MP/UC
5

35
7

3.5 KEYBOARD UNIT

CN801

COMMUNICATION LINE(KYDT, DPDT)


3V
5V, 5V
3V

RESET SW

VOLUME

REMOTE CONTROL
SENSOR

KEY ILM

C
DEH-P940MP/UC

36
1

OEL MODULE

KEYBOARD UNIT

RESET

DISPLAY CONTROLLER

1R0/35

R22

12V REG.
(FLASH)

C
DEH-P940MP/UC
5

37
7

3.6 CD MECHANISM MODULE(GUIDE PAGE)

F-a
A
F

D-RAM
F
T
C
S

SIGNAL LINE
FOCUS SERVO LINE
TRACKING SERVO LINE
CARRIAGE SERVO LINE
SPINDLE SERVO LINE

PICKUP UNIT
(SERVICE)(P9MP3)

CN101

F
T
T

T
T
F
F

0
!

SWITCHES:
CD CORE UNIT(S9MP3)
S901 : HOME SWITCH ........ ON-OFF
......
S902 : CLAMP SWITCH
ON-OFF
....
S903 : DSCSNS SWITCH ON-OFF
...........
S904 : 12EJ SWITCH
ON-OFF
............
S905 : 8EJ SWITCH
ON-OFF
The underlined indicates the switch
position.

5/3.3

CD DRIVER

@
S

C
F

6
8

SPINDLE MOTOR
M1 CXB6007
S
S

F
C

F
C

T
S

T
S

LOADING/CARRIAGE
MOTOR
M2 CXB5903

+3.3V
REGULATOR

F
DEH-P940MP/UC

38
1

F-b
F

CD CORE UNIT (S9MP3)

A
CN702

B
CN902
16

9
$

+2.5V
REGULATOR

&

+3.3V
REGULATOR
CN901

SINGLE CD CONTROLLER

A
CN701

F
DEH-P940MP/UC
5

39
7

40

SWITCHES:

T
F

CN101

F-b

PICKUP UNIT
(SERVICE)(P9MP3)

SIGNAL LINE
FOCUS SERVO LINE
TRACKING SERVO LINE
CARRIAGE SERVO LINE
SPINDLE SERVO LINE

D-RAM

A-a
F-a F-b

1
3
4

F
C

C
S

F-a

DEH-P940MP/UC

LOADING/CARRIAGE
MOTOR
M2 CXB5903

+3.3V
REGULATOR

F
T
T

A-a
F-a F-b

@
S

CD DRIVER

5/3.3

SPINDLE MOTOR
M1 CXB6007

The underlined indicates the switch


position.

SWITCHES:
CD CORE UNIT(S9MP3)
S901 : HOME SWITCH ........ ON-OFF
S902 : CLAMP SWITCH ...... ON-OFF
S903 : DSCSNS SWITCH .... ON-OFF
S904 : 12EJ SWITCH ........... ON-OFF
S905 : 8EJ SWITCH ............ ON-OFF

5
7
8

4
5

F-b

C
S

F-a

DEH-P940MP/UC

41

16

CD CORE UNIT (S9MP3)

F-b

42

3
%

CN902

F-a F-b

1
4

CN702

DEH-P940MP/UC

SINGLE CD CONTROLLER

+2.5V
REGULATOR

5
F-a F-b

+3.3V
REGULATOR
4

&

CN901

5
6

A
CN701

F-b

DEH-P940MP/UC

43

Note:1. The encircled numbers denote measuring points in the circuit diagram.
2. Reference voltage
REFO1 : 1.65V

- Waveforms
A

1
2
3
4

CH1:DSCSNS 5V/div.
CH2:CLCONT 5V/div.
500ms/div.
CH3:LOEJ
5V/div.
CH4:VD
10V/div.
When loading a 12cm CD

1
2
3
4

5 CH1:SIN
1V/div.
CH1:DSCSNS 5V/div.
6 CH2:CIN
500mV/div.
2s/div.
CH2:CLCONT 5V/div.
500ms/div.
7 CH3:TIN
500mV/div.
CH3:LOEJ
5V/div.
When setting up after loading a
CH4:VD
10V/div.
12cm CD-DA disc
When loading an 8cm CD

Ref. :
GND

Ref. :
GND

Ref. :
REFO

Mode :
Normal

Mode :
Normal

Mode :
Normal

5 CH1:SIN
1V/div.
6 CH2:CIN
500mV/div.
2s/div.
7 CH3:TIN
500mV/div.
When setting up after loading a
12cm CD-ROM(1 session)

8 CH1:FIN
200mV/div.
5 CH1:SIN
1V/div.
6 CH2:CIN
500mV/div.
2s/div. 9 CH2:RFOK 2V/div.
500ms/div.
5 CH3:SIN
2V/div.
7 CH3:TIN
500mV/div.
When setting up "Source On"
When setting up after loading a
(12cm CD-DA)
12cm CD-ROM(2 session)

Ref. :
REFO

Ref. :
REFO

Ref. :
REFO

Mode :
Normal

Mode :
Normal

Mode :
Normal

0 CH1:TE
! CH2:FE

500mV/div.
! CH1:FE
500mV/div.
! CH1:FE
500mV/div.
200ms/div.
500mV/div.
8 CH2:FIN
500mV/div.
8 CH2:FIN
500mV/div.
20ms/div.
20ms/div.
0 CH3:TE
500mV/div.
0 CH3:TE
500mV/div.
When setting up "Source On"
7 CH4:TIN
500mV/div.
7 CH4:TIN
500mV/div.
During "Play" (CD-DA)
During "Play"(CD-ROM, generating 1Track
Jump periodically) Refer to "1Track Jump."

Ref. :
REFO

Ref. :
REFO

Ref. :
REFO

Mode :
Normal

Mode :
Normal

Mode :
Normal

@ CH1:MDX
5 CH2:SIN

500mV/div.
1V/div.

5ms/div.

Spindle waveform during "Play"

# CH1:RFAGC 500mV/div.
@ CH1:MDX 500mV/div.
5s/div.
5 CH2:SIN
1V/div.
RF eye pattern
Spindle waveform during "Play"
(Magnified)

Ref. :
REFO

Ref. :
REFO

Ref. :
REFO

Mode :
Normal

Mode :
Normal

Mode :
Normal

DEH-P940MP/UC

44
1

5s/div.

8 CH1:FIN
! CH2:FE

500mV/div.
200ms/div.
500mV/div.

0 CH1:TE
500mV/div.
# CH2:RFAGC 500mV/div.

2ms/div.

# CH1:RFAGC 1V/div.
0 CH2:TE
500mV/div. 500s/div.
7 CH3:TIN
500mV/div.

Focus Search
1Track Jump

When "Tracking Open"

Ref. :
REFO

Ref. :
REFO

Ref. :
REFO

Mode :
TEST

Mode :
TEST

Mode :
TEST

# CH1:RFAGC 1V/div.
0 CH2:TE
500mV/div.
7 CH3:TIN
500mV/div.

# CH1:RFAGC 1V/div.
1ms/div. 0 CH2:TE
500mV/div.
7 CH3:TIN
500mV/div.

32Track Jump

#
5ms/div. 7
0
8

100Track Jump

CH1:RFAGC 1V/div.
CH2:TIN
1V/div.
CH3:TE
1V/div.
CH4:FIN
1V/div.

When reproducing black dots(800m)

Ref. :
REFO

Ref. :
REFO

Ref. :
REFO

Mode :
TEST

Mode :
TEST

Mode :
Normal

#
0
6
5

CH1:RFAGC 1V/div.
CH2:TE
1V/div.
500s/div.
CH3:CIN
500mV/div.
CH4:SIN
2V/div.
During inside/outside search (outer
circumference inner circumference)

$ CH1:LRCKIN 2V/div.
% CH2:DIN
2V/div.
^ CH3:SCKIN 2V/div.

$ CH1:LRCKIN 2V/div.
2V/div.
10s/div. % CH2:DIN
^ CH3:SCKIN 2V/div.

Ref. :
GND

Ref. :
REFO

Mode :
Normal

Mode :
Normal

Mode :
Normal

200s/div.

1 CH1:DSCSNS
2 CH2:CLCONT
3 CH3:LOEJ

2s/div.

Digital Audio (Magnified)

Digital Audio

Ref. :
REFO

& CH1:LOUT 1V/div.


* CH2:ROUT 1V/div.

500s/div.

5V/div.
5V/div.
5V/div.

10s/div.

1 CH1:DSCSNS
2 CH2:CLCONT
3 CH3:LOEJ

5V/div.
5V/div.
5V/div.

10s/div.

Analog Audio (Magnified)


When "Eject" (12cm CD)

When "Eject" (8cm CD)

Ref. :
AGND

Ref. :
GND

Ref. :
GND

Mode :
Normal

Mode :
Normal

Mode :
Normal

DEH-P940MP/UC
5

45
7

4. PCB CONNECTION DIAGRAM


4.1 TUNER AMP UNIT

CORD ASSY

CORD ASSY

ANTENN

TUNER AMP UNIT

NOTE FOR PCB DIAGRAMS


1.The parts mounted on this PCB
include all necessary parts for
several destination.
For further information for
respective destinations, be sure
to check with the schematic diagram.
2.Viewpoint of PCB diagrams

Connector

ANTENN

Capacitor

SIDE A

P.C.Board

Chip Part

SIDE B

RCA OUT

FAN
MOTOR

CN1501

F
D

CN902

AUTOMATIC
FLAP MOTOR

M
M951

FRONT

DEH-P940MP/UC

46
1

ANTENNA CABLE

CORD ASSY

SIDE A

IC,Q

FM/AM TUNER UNIT

ANTENNA

DSP
MODE

OUT
IP-BUS

CN901

C
CN1901

A
DEH-P940MP/UC
5

47
7

TUNER AMP UNIT


IC.Q

A
DEH-P940MP/UC

48
1

SIDE B

A
DEH-P940MP/UC
5

49
7

4.2 DSP UNIT

SIDE A

DSP UNIT

IC,Q

B
DEH-P940MP/UC

50
1

SIDE B

DSP UNIT
A

IC,Q

CN251

DEH-P940MP/UC
5

51
7

4.3 KEYBOARD UNIT

IC,Q

KEYBOARD UNIT
OPEN

VOLUME

SOURCE

SIDE A

BACK
1

2
3
4
5

6
NEXT
RESET

LEFT

DOWN

UP

D
BAND
RIGHT

DEH-P940MP/UC

52
1

KEYBOARD UNIT

IC,Q

SIDE B

OEL MODULE
C

CN801

C
DEH-P940MP/UC
5

53
7

4.4 CD CORE UNIT(S9MP3)

CD CORE UNIT (S9MP3)

SIDE A

12EJ

DSCSNS

M2
LOADING
/CARRIAGE
MOTOR
M1
SPINDLE
MOTOR
B

A
CN701

HOME
C

PICKUP UNIT
(SERVICE)(P9MP3)

A
CN702

REFO1
F
D

F
DEH-P940MP/UC

54
1

CD CORE UNIT (S9MP3)

SIDE B

8EJ

CLAMP

F
DEH-P940MP/UC
5

55
7

4.5 EQ PCB, SWITCH PCB

BLUE

RED

WHITE

D EQ PCB

A CN131
B

SWITCH PCB

BLUE
RED
WHITE

OPEN
S952

CLOSE
S951

A CN851

D E
DEH-P940MP/UC

56
1

5. ELECTRICAL PARTS LIST


NOTE:
Parts whose parts numbers are omitted are subject to being not supplied.
The part numbers shown below indicate chip components.
Chip Resistor
RS1/_S___J,RS1/__S___J
Chip Capacitor (except for CQS.....)
CKS....., CCS....., CSZS.....
Circuit Symbol and No. Part Name Part No.

Number:CWM8223(P940MP/UC)
A Unit
Unit Name:Tuner Amp Unit
MISCELLANEOUS
IC 101
IC 141
IC 142
IC 251
IC 271

IC
IC
IC
IC
IC

HA12187FP
NJM4558MD
NJM4558MD
BA033FP
PA2028A

IC 301
IC 601
IC 801
IC 851
IC 961

IC
IC
IC
IC
IC

PAL007A
PD5750A
NJU7223DL1-33
BA6288FS
S-80835ANUP-EDZ

Q
Q
Q
Q
Q

101
102
131
132
133

Transistor
Transistor
Transistor
Transistor
Transistor

2SA1235A-12
RT1N241C-12
2SC3052-12
IMD2A
2SC3052-12

Q
Q
Q
Q
Q

251
253
301
351
352

Transistor
Transistor
Transistor
Transistor
Transistor

RT1N141C-12
2SB1198K
RT1N241C-12
HN1C03F
HN1C03F

Q
Q
Q
Q
Q

353
401
591
593
721

Transistor
Transistor
Transistor
Transistor
Transistor

HN1C03F
2SC3052-12
IMD2A
2SD1859
IMD2A

Q
Q
Q
Q
Q

722
751
752
801
802

Transistor
Transistor
Transistor
Transistor
Transistor

2SD2375
2SD2375
IMD2A
2SB808
RT1N141C-12

Q
Q
Q
Q
Q

803
804
805
806
807

Transistor
Transistor
Transistor
Transistor
Transistor

2SD2318F5
IMD2A
2SC3052-12
2SD1859
IMD2A

Q
Q
Q
Q
Q

851
852
853
911
912

Transistor
Transistor
Transistor
Transistor
Transistor

2SD1760F5
RT1P141C-12
RT1N241C-12
2SD1760F5
IMD2A

Q
Q
Q
Q

921
922
923
931

Transistor
Transistor
Transistor
Transistor

2SD2375
2SB1238
RT1N141C-12
IMX1

Circuit Symbol and No. Part Name Part No.


Q 932
Transistor
RT1N141C-12
Q
Q
Q
Q
D

951
962
980
981
131

Transistor
Transistor
Transistor
Transistor
Diode

2SA1235A-12
2SC3052-12
IMD2A
2SC3052-12
MA3039(L)

D
D
D
D
D

141
142
271
272
591

Diode
Diode
Diode
Diode
Diode

UDZS3R9(B)
RB706F-40
1SS396
1SS396
HZS11L(C3)

D
D
D
D
D

601
602
721
752
801

Diode Network
Diode Network
Diode
Diode
Diode Network

DA204U
DA204U
HZS9L(B1)
HZS6L(B3)
DA204U

D
D
D
D
D

802
803
804
805
810

Diode Network
Diode Network
Diode Network
Diode
Diode

DA204U
DA204U
DA204U
MA3062(M)
HZS9L(C2)

D
D
D
D
D

811
814
815
851
852

Diode Network
Diode Network
Diode
Diode
Diode

DA204U
DA204U
HZS11L(A1)
HZS7L(C3)
1SS133

D
D
D
D
D

853
901
902
903
904

Diode
Diode
Diode
Diode
Diode

1SS133
MPG06G-6415G50
MPG06G-6415G50
MPG06G-6415G50
MPG06G-6415G50

D
D
D
D
D

911
912
921
931
932

Diode
Diode
Diode
Diode
Diode

MPG06G-6415G50
HZS6L(B1)
HZS9L(B3)
HZS7L(A1)
HZS7L(C3)

D
D
D
D
D

933
951
961
971
981

Diode
Diode
Diode
Diode
Diode

MPG06G-6415G50
DAN202U
DAN202U
DAN202U
DAN202U

D 982
D 983
ZNR451
L 101
L 251

Diode
Diode
Surge Protector
Inductor
Inductor

HZS9L(A2)
DAN202U
RCCA-201Q43UA-PI
LCTB3R3K2125
LAU1R0K

L 252
L 253

Ferri-Inductor
Inductor

LAU2R2K
CTF1531

DEH-P940MP/UC
5

57
7

Circuit Symbol and No. Part Name Part No.


L 254
Inductor
CTF1529
L 255
Inductor
CTF1388
L 271
Ferri-Inductor
LAU101K

Circuit Symbol and No. Part Name Part No.


R 148
RS1/16S103J
R 149
RS1/16S153J

L
L
L
L
L

401
402
404
601
661

Inductor
Inductor
Ferri-Inductor
Inductor
Inductor

LAU100K
LCTB4R7K2125
LAU2R2K
LAU100K
LAU100K

L
L
L
L
X

801
802
841
951
601

Inductor
Inductor
Inductor
Inductor
Radiator 10.000MHz

LAU100K
CTF1489
LAU100K
CTF1530
CSS1599

Switch(DSP MODE)
Lamp 14V 60mA
Semi-fixed 10k(B)
Microphone
Buzzer

CSH1055
CEL1690
CCP1448
CPM1011
CPV1050

FM/AM Tuner Unit


DSP Unit

CWE1563
CWM8229

S 601
IL 801
VR141
MIC141
SP641

RESISTORS

R
R
R
R
R

150
151
152
154
155

RS1/16S153J
RS1/16S223J
RN1/16SE4702D
RN1/16SE4702D
RS1/16S152J

R
R
R
R
R

161
162
163
164
171

RS1/16S272J
RS1/16S272J
RS1/16S162J
RS1/16S162J
RS1/16S0R0J

R
R
R
R
R

172
251
252
271
277

RS1/16S0R0J
RS1/16S472J
RS1/16S122J
RS1/16S103J
RS1/16S103J

R
R
R
R
R

301
302
303
304
351

RS1/16S103J
RS1/16S103J
RS1/16S103J
RS1/16S331J
RS1/16S820J

R
R
R
R
R

101
102
103
104
105

RS1/16S101J
RS1/16S470J
RS1/16S101J
RS1/16S222J
RS1/16S103J

R
R
R
R
R

352
353
354
355
356

RS1/16S820J
RS1/16S820J
RS1/16S820J
RS1/16S820J
RS1/16S820J

R
R
R
R
R

106
107
108
109
110

RS1/16S0R0J
RS1/16S332J
RS1/16S181J
RS1/16S181J
RS1/16S223J

R
R
R
R
R

357
358
359
360
361

RS1/16S223J
RS1/16S223J
RS1/16S223J
RS1/16S223J
RS1/16S223J

R
R
R
R
R

111
112
113
115
116

RS1/16S223J
RS1/16S102J
RS1/16S102J
RS1/16S562J
RS1/16S150J

R
R
R
R
R

362
363
364
365
366

RS1/16S223J
RS1/16S103J
RS1/16S103J
RS1/16S103J
RS1/16S103J

R
R
R
R
R

117
118
119
120
128

RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J

R
R
R
R
R

367
368
369
370
371

RS1/16S103J
RS1/16S103J
RS1/16S471J
RS1/16S471J
RS1/16S471J

R
R
R
R
R

130
131
132
133
134

RS1/16S0R0J
RS1/16S104J
RS1/16S222J
RS1/16S103J
RS1/16S561J

R
R
R
R
R

372
373
374
375
377

RS1/16S471J
RS1/16S471J
RS1/16S471J
RS1/16S0R0J
RS1/16S0R0J

R
R
R
R
R

135
136
137
138
139

RS1/16S223J
RS1/16S473J
RS1/16S153J
RS1/16S683J
RS1/16S682J

R
R
R
R
R

401
402
403
404
409

RS1/16S473J
RS1/16S473J
RS1/16S681J
RS1/16S681J
RS1/16S681J

R
R
R
R
R

140
141
142
143
144

RS1/16S152J
RS1/16S222J
RS1/16S104J
RS1/16S152J
RS1/16S102J

R
R
R
R
R

410
411
412
413
414

RS1/16S103J
RS1/16S681J
RS1/16S681J
RS1/16S681J
RS1/16S473J

R 145
R 146
R 147

RS1/16S101J
RS1/16S563J
RS1/16S103J

R 415
R 416
R 417

RS1/16S472J
RS1/16S473J
RS1/16S473J

DEH-P940MP/UC

58
1

Circuit Symbol and No. Part Name Part No.


R 418
RS1/16S473J
R 419
RS1/16S222J

Circuit Symbol and No. Part Name Part No.


R 808
RS1/16S103J
R 809
RS1/16S103J

R
R
R
R
R

420
424
429
515
593

RS1/16S222J
RS1/16S393J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S391J

R
R
R
R
R

810
812
814
817
818

RD1/4PU561J
RS1/16S102J
RD1/4PU391J
RS1/16S473J
RS1/16S472J

R
R
R
R
R

594
601
602
603
604

RS1/16S1R0J
RS1/16S104J
RS1/16S102J
RS1/16S104J
RS1/16S472J

R
R
R
R
R

823
824
825
826
851

RS1/16S222J
RS1/10S1R0J
RS1/16S0R0J
RS1/16S222J
RAB4C102J

R
R
R
R
R

605
606
607
608
609

RS1/16S221J
RS1/16S682J
RS1/16S221J
RS1/16S682J
RS1/16S102J

R
R
R
R
R

852
853
861
862
911

RS1/16S102J
RS1/16S102J
RS1/16S102J
RS1/16S102J
RS1/16S0R0J

R
R
R
R
R

610
611
612
613
614

RS1/16S102J
RS1/16S104J
RS1/16S104J
RS1/16S104J
RS1/16S473J

R
R
R
R
R

912
913
914
922
923

RS1/16S821J
RS1/16S153J
RS1/16S821J
RD1/4PU221J
RS1/16S223J

R
R
R
R
R

615
616
617
618
619

RS1/16S221J
RS1/16S682J
RS1/16S221J
RS1/16S682J
RS1/16S221J

R
R
R
R
R

924
925
926
931
932

RD1/4PU272J
RS1/16S471J
RS1/16S561J
RS1/16S472J
RS1/16S473J

R
R
R
R
R

620
621
622
623
624

RS1/16S473J
RS1/16S221J
RS1/16S682J
RS1/16S104J
RS1/16S104J

R
R
R
R
R

933
934
935
936
951

RS1/16S103J
RS1/16S473J
RS1/16S104J
RS1/16S103J
RS1/16S153J

R
R
R
R
R

625
627
628
633
634

RS1/16S473J
RS1/16S104J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J

R
R
R
R
R

952
953
954
961
962

RS1/16S472J
RS1/16S472J
RS1/16S102J
RS1/16S102J
RS1/16S102J

R
R
R
R
R

635
636
641
651
713

RS1/16S0R0J
RS1/16S0R0J
RS1/16S102J
RS1/16S473J
RS1/16S102J

R
R
R
R
R

963
964
965
981
982

RS1/16S473J
RS1/16S183J
RS1/16S222J
RS1/16S223J
RS1/16S473J

R
R
R
R
R

715
716
717
718
719

RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J

R 983
R 984
R 985

RS1/16S103J
RS1/16S473J
RS1/16S102J

R
R
R
R
R

721
722
723
751
752

RD1/4PU101J
RS1/16S221J
RD1/4PU101J
RS1/16S152J
RS1/16S221J

C
C
C
C
C

101
131
132
133
141

CKSRYB104K16
CKSRYB681K50
CEJQ101M6R3
CKSQYB225K10
CKSRYB105K10

R
R
R
R
R

753
754
801
802
803

RS1/16S182J
RS1/16S0R0J
RS1/16S222J
RS1/16S222J
RS1/16S222J

C
C
C
C
C

142
143
144
145
146

CKSRYB105K10
CKSRYB105K10
CCSRCH101J50
CEJQNP4R7M16
CKSRYB105K10

R 804
R 805
R 807

RS1/16S103J
RS1/16S222J
RS1/16S1R0J

C 147
C 148
C 149

CEJQNP4R7M16
CKSRYB105K10
CKSRYB104K16

CAPACITORS

DEH-P940MP/UC
5

59
7

Circuit Symbol and No. Part Name Part No.


C 150
CEJQNP100M10
C 152
CKSRYB474K10

Circuit Symbol and No. Part Name Part No.


C 360
CKSRYB222K50
C 361
CKSRYB222K50

C
C
C
C
C

155
161
162
245
246

CKSRYB105K10
CKSRYB183K25
CKSRYB183K25
CKSQYB225K10
CKSQYB225K10

C
C
C
C
C

362
403
404
405
406

CKSRYB222K50
CKSRYB473K50
CEJQ101M10
CKSRYB103K50
CEJQ220M10

C
C
C
C
C

247
248
249
251
252

CKSQYB225K10
CKSQYB225K10
CCH1438
CEJQ220M25
CKSRYF105Z10

C
C
C
C
C

408
409
411
513
591

CKSRYB223K50
CKSRYB223K50
CKSRYB472K50
CCSRCH101J50
CKSRYB103K50

C
C
C
C
C

253
254
256
258
259

CKSQYB225K10
CKSRYF105Z10
CCSRCH101J50
CEJQ101M6R3
CEJQ221M6R3

C
C
C
C
C

593
594
601
602
603

CEJQ100M16
CKSRYB103K50
CCSRCH200J50
CCSRCH180J50
CKSRYB104K16

C
C
C
C
C

260
263
266
271
272

CCSRCH101J50
CEJQ470M10
CKSQYB225K10
CEJQ4R7M35
CEJQ101M16

C
C
C
C
C

605
606
701
702
703

CEJQ4R7M35
CKSQYB225K10
CCSRCH101J50
CCSRCH101J50
CCSRCH101J50

C
C
C
C
C

273
274
275
276
277

CASAQ3R3M16
CEJQ100M16
CKSYB684K16
CASA220M16
CKSRYF105Z10

C
C
C
C
C

705
706
721
722
723

C
C
C
C
C

278
279
280
281
283

CEJQ330M25
CEJQ330M25
CEJQ330M25
CEJQ330M25
CKSRYB105K10

C
C
C
C
C

751
752
805
806
808

CKSRYB472K50
CEAL470M10
CEJQ101M16
CKSRYB473K50
CKSRYB104K16

C
C
C
C
C

284
285
286
287
288

CKSRYB105K10
CKSRYB105K10
CKSRYB105K10
CKSRYB105K10
CKSRYB105K10

C
C
C
C
C

809
810
812
815
816

CKSRYB104K16
CEV470M6R3
CKSRYB103K50
CCSRCH101J50
CCSRCH101J50

C
C
C
C
C

301
302
303
304
306

CKSRYB474K10
CKSRYB474K10
CKSRYB474K10
CKSRYB474K10
CEJQ330M10

C
C
C
C
C

818
819
821
830
833

CEJQ330M16
CCSRCH101J50
CCSRCH101J50
CKSRYB104K16
CCSRCH102J50

C
C
C
C
C

307
308
309
310
311

CCH1433
CKSRYB104K16
CEJQ100M16
CKSQYB225K10
CKSRYB474K10

C
C
C
C
C

842
843
844
851
852

CEV470M6R3
CKSRYB104K16
CKSRYB104K16
CKSRYB224K10
CKSRYB104K16

C
C
C
C
C

312
313
314
315
351

CKSRYB474K10
CKSRYB474K10
CKSRYB474K10
CKSQYB225K10
CEJQ100M50

C
C
C
C
C

853
855
856
857
911

CASAQ4R7M10
CKSRYB102K50
CCSRCH101J50
CCSRCH101J50
CCH1331

C
C
C
C
C

352
353
354
355
356

CEJQ100M50
CEJQ100M50
CEJQ100M50
CEJQ100M50
CEJQ100M50

C
C
C
C
C

912
913
914
915
921

CKSRYB222K50
CKSRYB222K50
CKSRYB222K50

C 922
C 923
C 931

470F/10V

3300F/16V

C 357
C 358
C 359

470F/10V

100F/10V

470F/16V

470F/16V

CCSRCH101J50
CCH1438
CKSRYB473K50
CKSRYB102K50
CCH1450

CKSRYB472K50
CKSRYB103K50
CEAL470M10
CCH1331
CEAT331M10
CKSRYB103K50
CEV101M16
CKSRYB105K10

DEH-P940MP/UC

60
1

Circuit Symbol and No. Part Name Part No.


C 932
CKSRYB104K25
C 962
CKSRYB104K16
C 963

CKSRYB105K10

Number:CWM8224(P9400MP/UC)
A Unit
Unit Name:Tuner Amp Unit
MISCELLANEOUS
IC 101
IC 141
IC 142
IC 251
IC 271

IC
IC
IC
IC
IC

HA12187FP
NJM4558MD
NJM4558MD
BA033FP
PA2028A

IC 301
IC 601
IC 801
IC 851
IC 961

IC
IC
IC
IC
IC

PAL007A
PD5750A
NJU7223DL1-33
BA6288FS
S-80835ANUP-EDZ

Q
Q
Q
Q
Q

101
102
131
132
133

Transistor
Transistor
Transistor
Transistor
Transistor

2SA1235A-12
RT1N241C-12
2SC3052-12
IMD2A
2SC3052-12

Q
Q
Q
Q
Q

251
253
301
351
352

Transistor
Transistor
Transistor
Transistor
Transistor

RT1N141C-12
2SB1198K
RT1N241C-12
IMH3A
IMH3A

Q
Q
Q
Q
Q

353
401
591
593
721

Transistor
Transistor
Transistor
Transistor
Transistor

IMH3A
2SC3052-12
IMD2A
2SD1859
IMD2A

Q
Q
Q
Q
Q

722
751
752
801
802

Transistor
Transistor
Transistor
Transistor
Transistor

2SD2375
2SD2375
IMD2A
2SB808
RT1N141C-12

Q
Q
Q
Q
Q

803
804
805
806
807

Transistor
Transistor
Transistor
Transistor
Transistor

2SD2318F5
IMD2A
2SC3052-12
2SD1859
IMD2A

Q
Q
Q
Q
Q

851
852
853
911
912

Transistor
Transistor
Transistor
Transistor
Transistor

2SD1760F5
RT1P141C-12
RT1N241C-12
2SD1760F5
IMD2A

Q
Q
Q
Q
Q

921
922
923
931
932

Transistor
Transistor
Transistor
Transistor
Transistor

2SD2375
2SB1238
RT1N141C-12
IMX1
RT1N141C-12

Q
Q
Q
Q
D

951
962
980
981
131

Transistor
Transistor
Transistor
Transistor
Diode

2SA1235A-12
2SC3052-12
IMD2A
2SC3052-12
MA3039(L)

D
D
D
D
D

Circuit Symbol and No. Part Name Part No.


141
Diode
UDZS3R9(B)
142
Diode
RB706F-40
272
Diode
DA204K
591
Diode
HZS11L(C3)
601
Diode Network
DA204U

D
D
D
D
D

602
721
752
801
802

Diode Network
Diode
Diode
Diode Network
Diode Network

DA204U
HZS9L(B1)
HZS6L(B3)
DA204U
DA204U

D
D
D
D
D

803
804
805
810
811

Diode Network
Diode Network
Diode
Diode
Diode Network

DA204U
DA204U
MA3062(M)
HZS9L(C2)
DA204U

D
D
D
D
D

814
815
851
852
853

Diode Network
Diode
Diode
Diode
Diode

DA204U
HZS11L(A1)
HZS7L(C3)
1SS133
1SS133

D
D
D
D
D

901
902
903
904
911

Diode
Diode
Diode
Diode
Diode

MPG06G-6415G50
MPG06G-6415G50
MPG06G-6415G50
MPG06G-6415G50
MPG06G-6415G50

D
D
D
D
D

912
921
931
932
933

Diode
Diode
Diode
Diode
Diode

HZS6L(B1)
HZS9L(B3)
HZS7L(A1)
HZS7L(C3)
MPG06G-6415G50

D
D
D
D
D

951
961
971
981
982

Diode
Diode
Diode
Diode
Diode

DAN202U
DAN202U
DAN202U
DAN202U
HZS9L(A2)

D 983
ZNR451
L 101
L 251
L 252

Diode
Surge Protector
Inductor
Inductor
Ferri-Inductor

DAN202U
RCCA-201Q43UA-PI
LCTB3R3K2125
LAU1R0K
LAU2R2K

L
L
L
L
L

253
254
255
271
401

Inductor
Inductor
Inductor
Ferri-Inductor
Inductor

CTF1531
CTF1529
CTF1388
LAU101K
LAU100K

L
L
L
L
L

402
404
601
661
801

Inductor
Ferri-Inductor
Inductor
Inductor
Inductor

LCTB4R7K2125
LAU2R2K
LAU100K
LAU100K
LAU100K

L
L
L
X
S

802
841
951
601
601

Inductor
Inductor
Inductor
Radiator 10.000MHz
Switch(DSP MODE)

CTF1489
LAU100K
CTF1530
CSS1599
CSH1055

Lamp 14V 60mA


Semi-fixed 10k(B)
Microphone
Buzzer
FM/AM Tuner Unit

CEL1690
CCP1448
CPM1011
CPV1050
CWE1563

IL 801
VR141
MIC141
SP641

61
7

DEH-P940MP/UC
5

Circuit Symbol and No. Part Name Part No.


DSP Unit
CWM8229

Circuit Symbol and No. Part Name Part No.


R 302
RS1/16S103J
R 303
RS1/16S103J
R 304
RS1/16S331J

RESISTORS

R
R
R
R
R

101
102
103
104
105

RS1/16S101J
RS1/16S470J
RS1/16S101J
RS1/16S222J
RS1/16S103J

R
R
R
R
R

351
352
353
354
355

RS1/16S820J
RS1/16S820J
RS1/16S820J
RS1/16S820J
RS1/16S820J

R
R
R
R
R

106
107
108
109
110

RS1/16S0R0J
RS1/16S332J
RS1/16S181J
RS1/16S181J
RS1/16S223J

R
R
R
R
R

356
357
358
359
360

RS1/16S820J
RS1/16S223J
RS1/16S223J
RS1/16S223J
RS1/16S223J

R
R
R
R
R

111
112
113
115
116

RS1/16S223J
RS1/16S102J
RS1/16S102J
RS1/16S562J
RS1/16S150J

R
R
R
R
R

361
362
363
364
365

RS1/16S223J
RS1/16S223J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J

R
R
R
R
R

117
118
119
120
128

RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J

R
R
R
R
R

366
367
368
369
370

RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S471J
RS1/16S471J

R
R
R
R
R

130
131
132
133
134

RS1/16S0R0J
RS1/16S104J
RS1/16S222J
RS1/16S103J
RS1/16S561J

R
R
R
R
R

371
372
373
374
375

RS1/16S471J
RS1/16S471J
RS1/16S471J
RS1/16S471J
RS1/16S0R0J

R
R
R
R
R

135
136
137
138
139

RS1/16S223J
RS1/16S473J
RS1/16S153J
RS1/16S683J
RS1/16S682J

R
R
R
R
R

377
401
402
403
404

RS1/16S0R0J
RS1/16S473J
RS1/16S473J
RS1/16S681J
RS1/16S681J

R
R
R
R
R

140
141
142
143
144

RS1/16S152J
RS1/16S222J
RS1/16S104J
RS1/16S152J
RS1/16S102J

R
R
R
R
R

409
410
411
412
413

RS1/16S681J
RS1/16S103J
RS1/16S681J
RS1/16S681J
RS1/16S681J

R
R
R
R
R

145
146
147
148
149

RS1/16S101J
RS1/16S563J
RS1/16S103J
RS1/16S103J
RS1/16S153J

R
R
R
R
R

414
415
416
417
418

RS1/16S473J
RS1/16S472J
RS1/16S473J
RS1/16S473J
RS1/16S473J

R
R
R
R
R

150
151
152
154
155

RS1/16S153J
RS1/16S223J
RN1/16SE4702D
RN1/16SE4702D
RS1/16S152J

R
R
R
R
R

419
420
424
429
515

RS1/16S222J
RS1/16S222J
RS1/16S393J
RS1/16S0R0J
RS1/16S0R0J

R
R
R
R
R

161
162
163
164
171

RS1/16S272J
RS1/16S272J
RS1/16S162J
RS1/16S162J
RS1/16S0R0J

R
R
R
R
R

593
594
601
602
603

RS1/16S391J
RS1/16S1R0J
RS1/16S104J
RS1/16S102J
RS1/16S104J

R
R
R
R
R

172
251
252
271
272

RS1/16S0R0J
RS1/16S472J
RS1/16S122J
RS1/16S103J
RS1/16S0R0J

R
R
R
R
R

604
605
606
607
608

RS1/16S472J
RS1/16S221J
RS1/16S682J
RS1/16S221J
RS1/16S682J

R 277
R 301

RS1/16S103J
RS1/16S103J

R 609
R 610

RS1/16S102J
RS1/16S102J

DEH-P940MP/UC

62
1

Circuit Symbol and No. Part Name Part No.


R 611
RS1/16S104J
R 612
RS1/16S104J
R 613
RS1/16S104J

Circuit Symbol and No. Part Name Part No.


R 913
RS1/16S153J
R 914
RS1/16S821J
R 922
RD1/4PU221J

R
R
R
R
R

614
615
616
617
618

RS1/16S473J
RS1/16S221J
RS1/16S682J
RS1/16S221J
RS1/16S682J

R
R
R
R
R

923
924
925
926
931

RS1/16S223J
RD1/4PU272J
RS1/16S471J
RS1/16S561J
RS1/16S472J

R
R
R
R
R

619
620
621
622
623

RS1/16S221J
RS1/16S473J
RS1/16S221J
RS1/16S682J
RS1/16S104J

R
R
R
R
R

932
933
934
935
936

RS1/16S473J
RS1/16S103J
RS1/16S473J
RS1/16S104J
RS1/16S103J

R
R
R
R
R

624
625
627
628
633

RS1/16S104J
RS1/16S473J
RS1/16S104J
RS1/16S0R0J
RS1/16S0R0J

R
R
R
R
R

951
952
953
954
961

RS1/16S153J
RS1/16S472J
RS1/16S472J
RS1/16S102J
RS1/16S102J

R
R
R
R
R

634
635
636
641
651

RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S102J
RS1/16S473J

R
R
R
R
R

962
963
964
965
981

RS1/16S102J
RS1/16S473J
RS1/16S183J
RS1/16S222J
RS1/16S223J

R
R
R
R
R

713
715
716
717
718

RS1/16S102J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J

R
R
R
R

982
983
984
985

RS1/16S473J
RS1/16S103J
RS1/16S473J
RS1/16S102J

R
R
R
R
R

719
721
722
723
751

RS1/16S0R0J
RD1/4PU101J
RS1/16S221J
RD1/4PU101J
RS1/16S152J

R
R
R
R
R

752
753
754
801
802

RS1/16S221J
RS1/16S182J
RS1/16S0R0J
RS1/16S222J
RS1/16S222J

R
R
R
R
R

803
804
805
807
808

RS1/16S222J
RS1/16S103J
RS1/16S222J
RS1/16S1R0J
RS1/16S103J

R
R
R
R
R

809
810
812
814
817

RS1/16S103J
RD1/4PU561J
RS1/16S102J
RD1/4PU391J
RS1/16S473J

R
R
R
R
R

818
823
824
825
826

RS1/16S472J
RS1/16S222J
RS1/10S1R0J
RS1/16S0R0J
RS1/16S222J

R
R
R
R
R

851
852
853
861
862

RAB4C102J
RS1/16S102J
RS1/16S102J
RS1/16S102J
RS1/16S102J

R 911
R 912

RS1/16S0R0J
RS1/16S821J

CAPACITORS
C
C
C
C
C

101
131
132
133
141

CKSRYB104K16
CKSRYB681K50
CEJQ101M6R3
CKSQYB225K10
CKSRYB105K10

C
C
C
C
C

142
143
144
145
146

CKSRYB105K10
CKSRYB105K10
CCSRCH101J50
CEJQNP4R7M16
CKSRYB105K10

C
C
C
C
C

147
148
149
150
152

CEJQNP4R7M16
CKSRYB105K10
CKSRYB104K16
CEJQNP100M10
CKSRYB474K10

C
C
C
C
C

155
161
162
245
246

CKSRYB105K10
CKSRYB183K25
CKSRYB183K25
CKSQYB225K10
CKSQYB225K10

C
C
C
C
C

247
248
249
251
252

CKSQYB225K10
CKSQYB225K10
CCH1438
CEJQ220M25
CKSRYF105Z10

C
C
C
C
C

253
254
256
258
259

CKSQYB225K10
CKSRYF105Z10
CCSRCH101J50
CEJQ101M6R3
CEJQ221M6R3

C 260

CCSRCH101J50

470F/10V

DEH-P940MP/UC
5

63
7

C
C
C
C

Circuit Symbol and No. Part Name Part No.


263
CEJQ470M10
266
CKSQYB225K10
271
CEJQ4R7M35
272
CEJQ101M16

C
C
C
C

Circuit Symbol and No. Part Name Part No.


702
CCSRCH101J50
703
CCSRCH101J50
705
CCSRCH101J50
706
470F/10V
CCH1438

C
C
C
C
C

273
274
275
276
277

CASAQ3R3M16
CEJQ100M16
CKSYB684K16
CASA220M16
CKSRYF105Z10

C
C
C
C
C

721
722
723
751
752

C
C
C
C
C

278
279
283
284
285

CEJQ330M25
CEJQ330M25
CKSRYB105K10
CKSRYB105K10
CKSRYB105K10

C
C
C
C
C

805
806
808
809
810

CEJQ101M16
CKSRYB473K50
CKSRYB104K16
CKSRYB104K16
CEV470M6R3

C
C
C
C
C

286
287
288
301
302

CKSRYB105K10
CKSRYB105K10
CKSRYB105K10
CKSRYB474K10
CKSRYB474K10

C
C
C
C
C

812
815
816
818
819

CKSRYB103K50
CCSRCH101J50
CCSRCH101J50
CEJQ330M16
CCSRCH101J50

C
C
C
C
C

303
304
306
307
308

CKSRYB474K10
CKSRYB474K10
CEJQ330M10
CCH1433
CKSRYB104K16

C
C
C
C
C

821
830
833
842
843

CCSRCH101J50
CKSRYB104K16
CCSRCH102J50
CEV470M6R3
CKSRYB104K16

C
C
C
C
C

309
310
311
312
313

CEJQ100M16
CKSQYB225K10
CKSRYB474K10
CKSRYB474K10
CKSRYB474K10

C
C
C
C
C

844
851
852
853
855

CKSRYB104K16
CKSRYB224K10
CKSRYB104K16
CASAQ4R7M10
CKSRYB102K50

C
C
C
C
C

314
315
351
352
353

CKSRYB474K10
CKSQYB225K10
CEJQ100M50
CEJQ100M50
CEJQ100M50

C
C
C
C
C

856
857
911
912
913

CCSRCH101J50
CCSRCH101J50
CCH1331
CKSRYB472K50
CKSRYB103K50

C
C
C
C
C

354
355
356
357
358

CEJQ100M50
CEJQ100M50
CEJQ100M50
CKSRYB222K50
CKSRYB222K50

C
C
C
C
C

914
915
921
922
923

C
C
C
C
C

359
360
361
362
403

CKSRYB222K50
CKSRYB222K50
CKSRYB222K50
CKSRYB222K50
CKSRYB473K50

C
C
C
C

931
932
962
963

C
C
C
C
C

404
405
406
408
409

CEJQ101M10
CKSRYB103K50
CEJQ220M10
CKSRYB223K50
CKSRYB223K50

C
C
C
C
C

411
513
591
593
594

CKSRYB472K50
CCSRCH101J50
CKSRYB103K50
CEJQ100M16
CKSRYB103K50

C
C
C
C
C

601
602
603
605
606

CCSRCH200J50
CCSRCH180J50
CKSRYB104K16
CEJQ4R7M35
CKSQYB225K10

C 701

CCSRCH101J50

3300F/16V

100F/10V

470F/16V

470F/16V

CKSRYB473K50
CKSRYB102K50
CCH1450
CKSRYB472K50
CEAL470M10

CEAL470M10
CCH1331
CEAT331M10
CKSRYB103K50
CEV101M16
CKSRYB105K10
CKSRYB104K25
CKSRYB104K16
CKSRYB105K10

Number:CWM8225(P9450MP/ES)
A Unit
Unit Name:Tuner Amp Unit
MISCELLANEOUS
IC 101
IC 141
IC 142
IC 251
IC 271

IC
IC
IC
IC
IC

HA12187FP
NJM4558MD
NJM4558MD
BA033FP
PA2028A

IC 301
IC 601
IC 801
IC 851
IC 961

IC
IC
IC
IC
IC

PAL007A
PD5750A
NJU7223DL1-33
BA6288FS
S-80835ANUP-EDZ

Q 101

Transistor

2SA1235A-12

DEH-P940MP/UC

64
1

Q
Q
Q
Q

Circuit Symbol and No. Part Name Part No.


102
Transistor
RT1N241C-12
131
Transistor
2SC3052-12
132
Transistor
IMD2A
133
Transistor
2SC3052-12

D
D
D
D

Circuit Symbol and No. Part Name Part No.


901
Diode
MPG06G-6415G50
902
Diode
MPG06G-6415G50
903
Diode
MPG06G-6415G50
904
Diode
MPG06G-6415G50

Q
Q
Q
Q
Q

251
253
301
351
352

Transistor
Transistor
Transistor
Transistor
Transistor

RT1N141C-12
2SB1198K
RT1N241C-12
HN1C03F
HN1C03F

D
D
D
D
D

911
912
921
931
932

Diode
Diode
Diode
Diode
Diode

MPG06G-6415G50
HZS6L(B1)
HZS9L(B3)
HZS7L(A1)
HZS7L(C3)

Q
Q
Q
Q
Q

353
401
591
593
721

Transistor
Transistor
Transistor
Transistor
Transistor

HN1C03F
2SC3052-12
IMD2A
2SD1859
IMD2A

D
D
D
D
D

933
951
961
971
981

Diode
Diode
Diode
Diode
Diode

MPG06G-6415G50
DAN202U
DAN202U
DAN202U
DAN202U

Q
Q
Q
Q
Q

722
751
752
801
802

Transistor
Transistor
Transistor
Transistor
Transistor

2SD2375
2SD2375
IMD2A
2SB808
RT1N141C-12

D 982
D 983
ZNR451
L 101
L 251

Diode
Diode
Surge Protector
Inductor
Inductor

HZS9L(A2)
DAN202U
RCCA-201Q43UA-PI
LCTB3R3K2125
LAU1R0K

Q
Q
Q
Q
Q

803
804
805
806
807

Transistor
Transistor
Transistor
Transistor
Transistor

2SD2318F5
IMD2A
2SC3052-12
2SD1859
IMD2A

L
L
L
L
L

252
253
254
255
271

Ferri-Inductor
Inductor
Inductor
Inductor
Ferri-Inductor

LAU2R2K
CTF1531
CTF1529
CTF1388
LAU101K

Q
Q
Q
Q
Q

851
852
853
911
912

Transistor
Transistor
Transistor
Transistor
Transistor

2SD1760F5
RT1P141C-12
RT1N241C-12
2SD1760F5
IMD2A

L
L
L
L
L

401
402
404
601
661

Inductor
Inductor
Ferri-Inductor
Inductor
Inductor

LAU100K
LCTB4R7K2125
LAU2R2K
LAU100K
LAU100K

Q
Q
Q
Q
Q

921
922
923
931
932

Transistor
Transistor
Transistor
Transistor
Transistor

2SD2375
2SB1238
RT1N141C-12
IMX1
RT1N141C-12

L
L
L
L
X

801
802
841
951
601

Inductor
Inductor
Inductor
Inductor
Radiator 10.000MHz

LAU100K
CTF1489
LAU100K
CTF1530
CSS1599

Q
Q
Q
Q
D

951
962
980
981
131

Transistor
Transistor
Transistor
Transistor
Diode

2SA1235A-12
2SC3052-12
IMD2A
2SC3052-12
MA3039(L)

S 601
IL 801
VR141
MIC141

Switch(DSP MODE)
Lamp 14V 60mA
Semi-fixed 10k(B)
Microphone
DSP Unit

CSH1055
CEL1690
CCP1448
CPM1011
CWM8229

D
D
D
D
D

141
142
271
272
591

Diode
Diode
Diode
Diode
Diode

UDZS3R9(B)
RB706F-40
1SS396
1SS396
HZS11L(C3)

SP641

Buzzer
FM/AM Tuner Unit

CPV1050
CWE1563

D
D
D
D
D

601
602
721
752
801

Diode Network
Diode Network
Diode
Diode
Diode Network

DA204U
DA204U
HZS9L(B1)
HZS6L(B3)
DA204U

D
D
D
D
D

802
803
804
805
810

Diode Network
Diode Network
Diode Network
Diode
Diode

DA204U
DA204U
DA204U
MA3062(M)
HZS9L(C2)

D
D
D
D
D

811
814
815
851
852

Diode Network
Diode Network
Diode
Diode
Diode

DA204U
DA204U
HZS11L(A1)
HZS7L(C3)
1SS133

Diode

1SS133

D 853

RESISTORS
R
R
R
R
R

101
102
103
104
105

RS1/16S101J
RS1/16S470J
RS1/16S101J
RS1/16S222J
RS1/16S103J

R
R
R
R
R

106
107
108
109
110

RS1/16S0R0J
RS1/16S332J
RS1/16S181J
RS1/16S181J
RS1/16S223J

R
R
R
R
R

111
112
113
115
116

RS1/16S223J
RS1/16S102J
RS1/16S102J
RS1/16S562J
RS1/16S150J

R 117
R 118

RS1/16S0R0J
RS1/16S0R0J

DEH-P940MP/UC
5

65
7

Circuit Symbol and No. Part Name Part No.


R 119
RS1/16S0R0J
R 120
RS1/16S0R0J
R 128
RS1/16S0R0J

Circuit Symbol and No. Part Name Part No.


R 369
RS1/16S471J
R 370
RS1/16S471J
R 371
RS1/16S471J

R
R
R
R
R

130
131
132
133
134

RS1/16S0R0J
RS1/16S104J
RS1/16S222J
RS1/16S103J
RS1/16S561J

R
R
R
R
R

372
373
374
375
377

RS1/16S471J
RS1/16S471J
RS1/16S471J
RS1/16S0R0J
RS1/16S0R0J

R
R
R
R
R

135
136
137
138
139

RS1/16S223J
RS1/16S473J
RS1/16S153J
RS1/16S683J
RS1/16S682J

R
R
R
R
R

401
402
403
404
409

RS1/16S473J
RS1/16S473J
RS1/16S681J
RS1/16S681J
RS1/16S681J

R
R
R
R
R

140
141
142
143
144

RS1/16S152J
RS1/16S222J
RS1/16S104J
RS1/16S152J
RS1/16S102J

R
R
R
R
R

410
411
412
413
414

RS1/16S103J
RS1/16S681J
RS1/16S681J
RS1/16S681J
RS1/16S473J

R
R
R
R
R

145
146
147
148
149

RS1/16S101J
RS1/16S563J
RS1/16S103J
RS1/16S103J
RS1/16S153J

R
R
R
R
R

415
416
417
418
419

RS1/16S472J
RS1/16S473J
RS1/16S473J
RS1/16S473J
RS1/16S222J

R
R
R
R
R

150
151
152
154
155

RS1/16S153J
RS1/16S223J
RN1/16SE4702D
RN1/16SE4702D
RS1/16S152J

R
R
R
R
R

420
424
429
515
593

RS1/16S222J
RS1/16S393J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S391J

R
R
R
R
R

161
162
163
164
171

RS1/16S272J
RS1/16S272J
RS1/16S162J
RS1/16S162J
RS1/16S0R0J

R
R
R
R
R

594
601
602
603
604

RS1/16S1R0J
RS1/16S104J
RS1/16S102J
RS1/16S104J
RS1/16S472J

R
R
R
R
R

172
251
252
271
277

RS1/16S0R0J
RS1/16S472J
RS1/16S122J
RS1/16S103J
RS1/16S103J

R
R
R
R
R

605
606
607
608
609

RS1/16S221J
RS1/16S682J
RS1/16S221J
RS1/16S682J
RS1/16S102J

R
R
R
R
R

301
302
303
304
351

RS1/16S103J
RS1/16S103J
RS1/16S103J
RS1/16S331J
RS1/16S820J

R
R
R
R
R

610
611
612
613
614

RS1/16S102J
RS1/16S104J
RS1/16S104J
RS1/16S104J
RS1/16S473J

R
R
R
R
R

352
353
354
355
356

RS1/16S820J
RS1/16S820J
RS1/16S820J
RS1/16S820J
RS1/16S820J

R
R
R
R
R

615
616
617
618
619

RS1/16S221J
RS1/16S682J
RS1/16S221J
RS1/16S682J
RS1/16S221J

R
R
R
R
R

357
358
359
360
361

RS1/16S223J
RS1/16S223J
RS1/16S223J
RS1/16S223J
RS1/16S223J

R
R
R
R
R

620
621
622
623
624

RS1/16S473J
RS1/16S221J
RS1/16S682J
RS1/16S104J
RS1/16S104J

R
R
R
R
R

362
363
364
365
366

RS1/16S223J
RS1/16S103J
RS1/16S103J
RS1/16S103J
RS1/16S103J

R
R
R
R
R

625
626
628
633
634

RS1/16S473J
RS1/16S104J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J

R 367
R 368

RS1/16S103J
RS1/16S103J

R 635
R 636

RS1/16S0R0J
RS1/16S0R0J

DEH-P940MP/UC

66
1

Circuit Symbol and No. Part Name Part No.


R 641
RS1/16S102J
R 651
RS1/16S473J
R 713
RS1/16S102J

Circuit Symbol and No. Part Name Part No.


R 965
RS1/16S222J
R 981
RS1/16S223J
R 982
RS1/16S473J

R
R
R
R
R

715
716
717
718
719

RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S0R0J

R 983
R 984
R 985

R
R
R
R
R

721
722
723
751
752

RD1/4PU101J
RS1/16S221J
RD1/4PU101J
RS1/16S152J
RS1/16S221J

C
C
C
C
C

101
131
132
133
141

CKSRYB104K16
CKSRYB681K50
CEJQ101M6R3
CKSQYB225K10
CKSRYB105K10

R
R
R
R
R

753
754
801
802
803

RS1/16S182J
RS1/16S0R0J
RS1/16S222J
RS1/16S222J
RS1/16S222J

C
C
C
C
C

142
143
144
145
146

CKSRYB105K10
CKSRYB105K10
CCSRCH101J50
CEJQNP4R7M16
CKSRYB105K10

R
R
R
R
R

804
805
807
808
809

RS1/16S103J
RS1/16S222J
RS1/16S1R0J
RS1/16S103J
RS1/16S103J

C
C
C
C
C

147
148
149
150
152

CEJQNP4R7M16
CKSRYB105K10
CKSRYB104K16
CEJQNP100M10
CKSRYB474K10

R
R
R
R
R

810
812
814
817
818

RD1/4PU561J
RS1/16S102J
RD1/4PU391J
RS1/16S473J
RS1/16S472J

C
C
C
C
C

155
161
162
245
246

CKSRYB105K10
CKSRYB183K25
CKSRYB183K25
CKSQYB225K10
CKSQYB225K10

R
R
R
R
R

823
824
825
826
851

RS1/16S222J
RS1/10S1R0J
RS1/16S0R0J
RS1/16S222J
RAB4C102J

C
C
C
C
C

247
248
249
251
252

CKSQYB225K10
CKSQYB225K10
CCH1438
CEJQ220M25
CKSRYF105Z10

R
R
R
R
R

852
853
861
862
911

RS1/16S102J
RS1/16S102J
RS1/16S102J
RS1/16S102J
RS1/16S0R0J

C
C
C
C
C

253
254
256
258
259

CKSQYB225K10
CKSRYF105Z10
CCSRCH101J50
CEJQ101M6R3
CEJQ221M6R3

R
R
R
R
R

912
913
914
922
923

RS1/16S821J
RS1/16S153J
RS1/16S821J
RD1/4PU221J
RS1/16S223J

C
C
C
C
C

260
263
266
271
272

CCSRCH101J50
CEJQ470M10
CKSQYB225K10
CEJQ4R7M35
CEJQ101M16

R
R
R
R
R

924
925
926
931
932

RD1/4PU272J
RS1/16S471J
RS1/16S561J
RS1/16S472J
RS1/16S473J

C
C
C
C
C

273
274
275
276
277

CASAQ3R3M16
CEJQ100M16
CKSYB684K16
CASA220M16
CKSRYF105Z10

R
R
R
R
R

933
934
935
936
951

RS1/16S103J
RS1/16S473J
RS1/16S104J
RS1/16S103J
RS1/16S153J

C
C
C
C
C

278
279
280
281
283

CEJQ330M25
CEJQ330M25
CEJQ330M25
CEJQ330M25
CKSRYB105K10

R
R
R
R
R

952
953
954
961
962

RS1/16S472J
RS1/16S472J
RS1/16S102J
RS1/16S102J
RS1/16S102J

C
C
C
C
C

284
285
286
287
288

CKSRYB105K10
CKSRYB105K10
CKSRYB105K10
CKSRYB105K10
CKSRYB105K10

R 963
R 964

RS1/16S473J
RS1/16S183J

C 301
C 302

CKSRYB474K10
CKSRYB474K10

RS1/16S103J
RS1/16S473J
RS1/16S102J

CAPACITORS

470F/10V

DEH-P940MP/UC
5

67
7

Circuit Symbol and No. Part Name Part No.


C 303
CKSRYB474K10
C 304
CKSRYB474K10
C 306
CEJQ330M10

Circuit Symbol and No. Part Name Part No.


C 821
CCSRCH101J50
C 830
CKSRYB104K16
C 833
CCSRCH102J50

C
C
C
C
C

307
308
309
310
311

CCH1433
CKSRYB104K16
CEJQ100M16
CKSQYB225K10
CKSRYB474K10

C
C
C
C
C

842
843
844
851
852

CEV470M6R3
CKSRYB104K16
CKSRYB104K16
CKSRYB224K10
CKSRYB104K16

C
C
C
C
C

312
313
314
315
351

CKSRYB474K10
CKSRYB474K10
CKSRYB474K10
CKSQYB225K10
CEJQ100M50

C
C
C
C
C

853
855
856
857
911

CASAQ4R7M10
CKSRYB102K50
CCSRCH101J50
CCSRCH101J50
CCH1331

C
C
C
C
C

352
353
354
355
356

CEJQ100M50
CEJQ100M50
CEJQ100M50
CEJQ100M50
CEJQ100M50

C
C
C
C
C

912
913
914
915
921

C
C
C
C
C

357
358
359
360
361

CKSRYB222K50
CKSRYB222K50
CKSRYB222K50
CKSRYB222K50
CKSRYB222K50

C
C
C
C
C

922
923
931
932
962

CKSRYB103K50
CEV101M16
CKSRYB105K10
CKSRYB104K25
CKSRYB104K16

C
C
C
C
C

362
403
404
405
406

CKSRYB222K50
CKSRYB473K50
CEJQ101M10
CKSRYB103K50
CEJQ220M10

C 963

CKSRYB105K10

C
C
C
C
C

408
409
411
513
591

CKSRYB223K50
CKSRYB223K50
CKSRYB472K50
CCSRCH101J50
CKSRYB103K50

C
C
C
C
C

593
594
601
602
603

CEJQ100M16
CKSRYB103K50
CCSRCH200J50
CCSRCH180J50
CKSRYB104K16

C
C
C
C
C

605
606
701
702
703

CEJQ4R7M35
CKSQYB225K10
CCSRCH101J50
CCSRCH101J50
CCSRCH101J50

C
C
C
C
C

705
706
721
722
723

C
C
C
C
C

751
752
805
806
808

CKSRYB472K50
CEAL470M10
CEJQ101M16
CKSRYB473K50
CKSRYB104K16

C
C
C
C
C

809
810
812
815
816

CKSRYB104K16
CEV470M6R3
CKSRYB103K50
CCSRCH101J50
CCSRCH101J50

C 818
C 819

CEJQ330M16
CCSRCH101J50

3300F/16V

470F/10V

100F/10V

CCSRCH101J50
CCH1438
CKSRYB473K50
CKSRYB102K50
CCH1450

470F/16V

470F/16V

CKSRYB472K50
CKSRYB103K50
CEAL470M10
CCH1331
CEAT331M10

Number:CWX2619
F Unit
Unit Name:CD Core Unit(S9MP3)
MISCELLANEOUS
IC 201
IC 202
IC 203
IC 301
IC 501

IC
IC
IC
IC
IC

UPD63760GJ
MSM51V4265EP-70TS
BA033SFP
BA5996FM
UPD61002GC

IC 502
IC 701
IC 702
IC 703
IC 704

IC
IC
IC
IC
IC

BA25BC0WFP
PE5269A
TC74VHCT08AFT
S-818A33AUC-BGN
PD9023A

Q
Q
Q
Q
Q

101
601
602
603
701

Transistor
Transistor
Transistor
Transistor
Transistor

2SB1132
DTC323TK
DTC323TK
2SB709A
UN2111

D
D
D
D
D

101
201
202
203
501

Diode
Diode
Diode
Diode
Diode

1SS355
1SR154-400
1SR154-400
1SR154-400
1SR154-400

D
D
D
D
L

502
503
504
601
201

Diode
Diode
Diode
Chip Diode
Inductor

1SR154-400
1SR154-400
1SR154-400
MA151WA
CTF1546

L
L
L
L
L

202
204
701
702
901

Inductor
Inductor
Inductor
Inductor
Inductor

CTF1546
CTF1546
CTF1546
LCYBR22J1608
CTF1306

DEH-P940MP/UC

68
1

Circuit Symbol and No. Part Name Part No.


L
L
X
X
S

902
903
202
701
901

Inductor
Inductor
Ceramic Resonator 24.57MHz
Ceramic Resonator 16.00MHz
Spring Switch(HOME)

CTF1306
CTF1306
CSS1570
CSS1576
CSN1051

S
S
S
S

902
903
904
905

Spring Switch(CLAMP)
Spring Switch(DSCSNS)
Spring Switch(12EJ)
Spring Switch(8EJ)

CSN1052
CSN1051
CSN1052
CSN1051

Circuit Symbol and No. Part Name Part No.


R 504
RAB4CQ223J

RESISTORS

R
R
R
R
R

505
506
507
508
509

RAB4CQ223J
RAB4CQ223J
RS1/16SS223J
RS1/16SS223J
RS1/16SS102J

R
R
R
R
R

510
511
512
513
601

RS1/16SS223J
RS1/16SS223J
RS1/16SS223J
RS1/16SS221J
RS1/16S101J

R
R
R
R
R

101
102
103
104
105

RS1/10S1R5J
RS1/10S1R5J
RS1/10S1R5J
RS1/10S1R5J
RS1/10S1R5J

R
R
R
R
R

602
603
604
605
701

RS1/16S101J
RS1/16S223J
RS1/16S223J
RS1/16SS103J
RS1/16SS0R0J

R
R
R
R
R

201
202
203
204
206

RS1/16SS102J
RS1/16SS333J
RS1/16SS333J
RS1/16SS333J
RS1/16SS221J

R
R
R
R
R

707
708
709
710
711

RS1/16SS0R0J
RS1/16SS102J
RS1/16SS102J
RS1/16SS102J
RS1/16SS102J

R
R
R
R
R

208
210
212
213
214

RS1/16SS221J
RS1/16SS221J
RS1/16SS221J
RS1/16SS1002D
RS1/16SS1002D

R
R
R
R
R

712
713
714
715
716

RS1/16SS102J
RS1/16SS102J
RS1/16SS473J
RAB4CQ221J
RAB4CQ221J

R
R
R
R
R

215
216
217
218
219

RS1/16SS1002D
RS1/16SS1002D
RS1/16SS1002D
RS1/16SS1002D
RS1/16SS1002D

R
R
R
R
R

717
718
719
720
721

RAB4CQ221J
RAB4CQ221J
RAB4CQ221J
RS1/16SS471J
RS1/16SS471J

R
R
R
R
R

220
221
222
223
224

RS1/16SS1002D
RS1/16SS103J
RS1/16SS103J
RS1/16SS103J
RS1/16SS103J

R
R
R
R
R

722
723
724
725
726

RAB4CQ221J
RS1/16SS102J
RN1/16SE1302D
RS1/16SS473J
RS1/16SS103J

R
R
R
R
R

225
226
227
228
229

RS1/16SS103J
RS1/16SS393J
RS1/16SS103J
RS1/16SS182J
RS1/16SS103J

R
R
R
R
R

727
728
729
730
731

RS1/16SS473J
RS1/16SS473J
RS1/16SS223J
RS1/16SS473J
RS1/16SS104J

R
R
R
R
R

231
233
237
238
239

RS1/16SS0R0J
RS1/16SS183J
RS1/16SS104J
RS1/16SS0R0J
RS1/16SS473J

R
R
R
R
R

732
733
734
735
737

RS1/16SS104J
RS1/16SS104J
RS1/16SS472J
RS1/16SS473J
RAB4CQ473J

R
R
R
R
R

301
302
303
304
305

RS1/16SS183J
RS1/16SS822J
RS1/16SS0R0J
RS1/16SS183J
RS1/16SS822J

R
R
R
R
R

739
740
741
743
745

RAB4CQ473J
RS1/16SS473J
RS1/16SS104J
RS1/16SS104J
RS1/16SS473J

R
R
R
R
R

306
307
308
309
310

RS1/16SS0R0J
RS1/16SS183J
RS1/16SS822J
RS1/16SS183J
RS1/16SS822J

R
R
R
R
R

746
747
748
749
750

RS1/16SS104J
RS1/16SS104J
RS1/16SS102J
RS1/16SS102J
RS1/16SS104J

R
R
R
R

311
501
502
503

RS1/16SS0R0J
RS1/16SS221J
RS1/16SS221J
RS1/16SS221J

R
R
R
R

752
801
802
803

RS1/16SS473J
RS1/16SS104J
RS1/16SS473J
RS1/16SS273J

DEH-P940MP/UC
5

69
7

Circuit Symbol and No. Part Name Part No.


R 901
RS1/16SS221J

R
R
R
R
R

902
903
904
905
906

RS1/16SS221J
RS1/16SS221J
RS1/16SS221J
RS1/16SS221J
RS1/16SS221J

R 908
R 909

RS1/16SS221J
RS1/16SS221J

Circuit Symbol and No. Part Name Part No.

CAPACITORS

C
C
C
C
C

504
505
506
508
509

47F/6.3V

CCH1436
CKSRYB224K16
CKSSYB104K10
CKSSYB104K10
CKSSYB104K10

C
C
C
C
C

510
511
601
602
603

CKSSYB104K10
CKSSYB104K10
CCSRCH102J50
CCSRCH102J50
CSZS4R7M10

C
C
C
C
C

101
102
103
104
105

CKSSYB104K10
CKSSYB104K10
CEV101M16
CEV101M4
CKSSYB104K10

C
C
C
C
C

604
701
702
703
704

CSZS4R7M10
CKSSYB104K10
CKSSYB471K50
CKSSYB103K16
CEV1R0M50

C
C
C
C
C

106
108
109
201
202

CKSRYB102K50
CKSSYB104K10
CEV100M16
CKSSYB471K50
CKSSYB104K10

C
C
C
C
C

705
706
707
708
709

CKSSYB104K10
CKSSYB471K50
CKSSYB104K10
CKSSYB104K10
CKSSYB103K16

C
C
C
C
C

203
204
205
206
207

CKSSYB104K10
CEV220M6R3
CKSSYB103K16
CKSSYB103K16
CEV221M4

C
C
C
C
C

710
711
712
713
714

C
C
C
C
C

208
209
210
211
216

CKSSYB104K10
CKSSYB104K10
CKSSYB104K10
CKSSYB104K10
CKSSYB332K50

C
C
C
C

715
716
901
903

C
C
C
C
C

217
218
219
220
221

CKSSYB104K10
CKSSYB223K16
CKSSYB104K10
CKSSYB103K16
CKSSYB104K10

C
C
C
C
C

222
223
224
225
226

CCSSCH270J50
CCSSCJ3R0C50
CKSSYB104K10
CKSSYB103K16
CCSSCH680J50

C
C
C
C
C

227
228
230
231
232

CCSSCH470J50
CKSSYB682K25
CKSSYB104K10
CKSSYB221K50
CKSSYB104K10

C
C
C
C
C

233
234
235
237
238

C
C
C
C
C

240
301
302
303
304

CCSSCH100D50
CKSSYB331K50
CKSSYB331K50
CKSSYB472K25
CKSSYB472K25

C
C
C
C
C

305
306
501
502
503

CEV101M16
CKSRYB224K16
CKSSYB104K10
CKSSYB471K50
CKSSYB104K10

47F/6.3V

CCH1436
CEV221M4
CKSRYB224K16
CKSSYB104K10
CKSSYB104K10

10F/10V

CKSSYB104K10
CCH1349
CKSRYB224K16
CKSSYB104K10
CKSSYB104K10
CKSSYB103K16
CKSSYB103K16
CKSSYB104K10
CCSRCH101J50

Number:CWM8229
B Unit
Unit Name:DSP Unit
MISCELLANEOUS
IC 1501
IC 1502
IC 1503
IC 1504
IC 1601

IC
IC
IC
IC
IC

PD5762A
PDG267A
TC7S08FU
TC74VHC126FT
PML011A

IC 1602
IC 1603
IC 1604
IC 1605
Q 1601

IC
IC
IC
IC
Transistor

NJM4558MD
NJM4558MD
NJM4558MD
NJM4558MD
DTC124EU

L
L
L
L
L

1501
1531
1532
1533
1534

Inductor
Inductor
Inductor
Inductor
Inductor

CTF1379
CTF1379
CTF1379
CTF1379
CTF1379

L
L
L
L
L

1535
1536
1537
1538
1539

Inductor
Inductor
Inductor
Inductor
Inductor

CTF1379
CTF1379
CTF1379
CTF1379
CTF1379

L
L
L
L
L

1541
1571
1572
1573
1574

Inductor
Inductor
Inductor
Inductor
Inductor

LCTA151J3225
CTF1389
CTF1379
CTF1409
CTF1379

DEH-P940MP/UC

70
1

Circuit Symbol and No. Part Name Part No.


X 1501
X 1502

Radiator 10.00MHz
Radiator 16.9344MHz

CSS1428
CSS1463

RESISTORS

R
R
R
R
R

Circuit Symbol and No. Part Name Part No.


1626
RS1/16S103J
1627
RS1/16S103J
1628
RS1/16S103J
1629
RS1/16S474J
1630
RS1/16S474J

R
R
R
R
R

1501
1504
1505
1506
1507

RS1/16S473J
RAB4C681J
RS1/16S102J
RS1/16S102J
RS1/16S105J

R
R
R
R
R

1631
1632
1633
1634
1635

RS1/16S474J
RS1/16S222J
RS1/16S333J
RS1/16S273J
RS1/16S183J

R
R
R
R
R

1508
1510
1511
1512
1513

RS1/16S102J
RS1/16S471J
RS1/16S102J
RAB4C473J
RS1/16S222J

R
R
R
R
R

1636
1637
1638
1639
1640

RS1/16S273J
RS1/16S474J
RS1/16S222J
RS1/16S333J
RS1/16S273J

R
R
R
R
R

1514
1515
1516
1517
1518

RAB4C681J
RS1/16S104J
RAB4C471J
RS1/16S473J
RS1/16S102J

R
R
R
R
R

1641
1642
1643
1644
1645

RS1/16S183J
RS1/16S273J
RS1/16S474J
RS1/16S222J
RS1/16S333J

R
R
R
R
R

1519
1520
1521
1522
1523

RS1/16S473J
RS1/16S102J
RS1/16S222J
RS1/16S222J
RS1/16S104J

R
R
R
R
R

1646
1647
1648
1649
1650

RS1/16S273J
RS1/16S183J
RS1/16S273J
RS1/16S474J
RS1/16S222J

R
R
R
R
R

1524
1525
1526
1527
1528

RS1/16S102J
RS1/16S102J
RS1/16S102J
RS1/16S221J
RS1/16S102J

R
R
R
R
R

1651
1652
1653
1654
1655

RS1/16S333J
RS1/16S273J
RS1/16S183J
RS1/16S273J
RS1/16S474J

R
R
R
R
R

1530
1531
1532
1533
1534

RS1/16S473J
RS1/16S225J
RS1/16S331J
RS1/16S155J
RAB4C221J

R
R
R
R
R

1656
1657
1658
1659
1660

RS1/16S222J
RS1/16S333J
RS1/16S273J
RS1/16S183J
RS1/16S273J

R
R
R
R
R

1535
1536
1539
1571
1572

RS1/16S221J
RS1/16S221J
RS1/16S473J
RS1/16S221J
RS1/16S473J

R
R
R
R
R

1661
1662
1663
1664
1665

RS1/16S474J
RS1/16S222J
RS1/16S333J
RS1/16S273J
RS1/16S183J

R
R
R
R
R

1573
1574
1575
1576
1577

RS1/16S473J
RS1/16S473J
RS1/16S473J
RS1/16S102J
RS1/16S102J

R
R
R
R
R

1666
1667
1668
1669
1670

RS1/16S273J
RS1/16S472J
RS1/16S104J
RS1/16S102J
RS1/16S473J

R
R
R
R
R

1578
1579
1581
1603
1606

RS1/16S102J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S103J
RS1/16S103J

R 1671
R 1672
R 1673

RS1/16S0R0J
RS1/16S102J
RS1/16S473J

R
R
R
R
R

1607
1608
1609
1610
1611

RS1/16S153J
RS1/16S682J
RAB4C0R0J
RS1/16S0R0J
RS1/16S0R0J

C
C
C
C
C

1532
1533
1534
1535
1537

CKSRYB102K50
CSZSQ4R7M10
CKSRYB104K16
CKSQYB225K10
CKSQYB225K10

R
R
R
R
R

1621
1622
1623
1624
1625

RS1/16S223J
RS1/16S472J
RS1/16S223J
RS1/16S472J
RS1/16S103J

C
C
C
C
C

1539
1540
1541
1542
1543

CKSRYB105K10
CKSRYB105K10
CKSRYB105K10
CKSRYB105K10
CKSRYB105K10

CAPACITORS

DEH-P940MP/UC
5

71
7

C
C
C
C
C

Circuit Symbol and No. Part Name Part No.


1544
CKSRYB105K10
1545
CKSRYB104K16
1546
CKSRYB104K16
1547
CKSRYB104K16
1548
CKSRYB104K16

C
C
C
C
C

Circuit Symbol and No. Part Name Part No.


1645
CCSRCH221J50
1646
CCSRCH151J50
1647
CCSRCH151J50
1648
CKSQYB225K10
1649
CKSQYB225K10

C
C
C
C
C

1549
1550
1551
1552
1553

CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16

C
C
C
C
C

1650
1651
1652
1653
1654

CKSQYB225K10
CCSRCH221J50
CCSRCH151J50
CCSRCH151J50
CKSQYB225K10

C
C
C
C
C

1554
1555
1556
1557
1558

CKSRYB104K16
CKSRYB104K16
CCSRCH180J50
CCSRCH180J50
CSZSQ4R7M10

C
C
C
C
C

1655
1656
1657
1658
1659

CCSRCH221J50
CCSRCH151J50
CCSRCH151J50
CKSQYB225K10
CKSQYB225K10

C
C
C
C
C

1560
1561
1562
1563
1564

CKSRYB104K16
CKSRYB104K16
CSZSQ4R7M10
CKSRYB104K16
CKSRYB104K16

C 1660

CKSQYB225K10

C
C
C
C
C

1571
1572
1573
1574
1575

CKSRYB103K25
CCSRCH220J50
CCSRCH220J50
CKSRYB103K50
CCSRCH101J50

C
C
C
C
C

1601
1602
1603
1604
1611

CKSRYB104K16
CSZSR100M10
CKSRYB105K10
CKSRYB105K10
CKSRYF105Z10

C
C
C
C
C

1612
1613
1614
1616
1617

CKSRYF105Z10
CKSQYB225K10
CKSRYB104K16
CKSRYB472K50
CKSRYB472K50

C
C
C
C
C

1618
1619
1621
1622
1623

CSZSR100M10
CKSRYF105Z10
CKSRYB102K50
CCSRCH221J50
CKSRYB102K50

C
C
C
C
C

1624
1625
1626
1627
1628

CCSRCH221J50
CKSRYB105K10
CKSRYB105K10
CKSYB475K10
CSZSR100M16

C
C
C
C
C

1629
1631
1632
1633
1634

CSZSR100M16
CCSRCH221J50
CCSRCH151J50
CCSRCH151J50
CKSQYB225K10

C
C
C
C
C

1635
1636
1637
1638
1639

CCSRCH221J50
CCSRCH151J50
CCSRCH151J50
CKSQYB225K10
CKSQYB225K10

C
C
C
C
C

1640
1641
1642
1643
1644

CKSQYB225K10
CCSRCH221J50
CCSRCH151J50
CCSRCH151J50
CKSQYB225K10

Number:CWM8231
C Unit
Unit Name:Keyboard Unit
MISCELLANEOUS
IC 1901
IC 1902
IC 1903
IC 1905
IC 1906

HIC Module
IC
IC
IC
IC

RS-140
PD5758A
S-80826ANUP-EDP
PD8093A
PD6380A

IC 1907
IC 1908
IC 1909
Q 1901
Q 1902

IC
IC
IC
Transistor
Transistor

PD3430A
TC7S08FU
TC7SET08FU
IMD2A
IMD2A

Q
D
D
D
D

1903
1901
1902
1905
1906

Transistor
Diode
Diode
Diode
Diode

2SC4154-11
DAP202U
DAN202U
MA110
DAN202U

D
D
D
D
D

1907
1909
1910
1911
1912

Diode
LED
LED
LED
LED

UDZS13(B)
CL190UBX
CL190UBX
CL190UBX
CL190UBX

D
D
D
D
D

1913
1914
1915
1916
1917

LED
LED
LED
LED
LED

CL190UBX
CL190UBX
CL190UBX
CL190UBX
CL190UBX

D
L
L
L
L

1919
1901
1902
1903
1904

LED
Inductor
Inductor
Inductor
Inductor

CL190UBX
CTF1295
CTF1484
LCYC4R7K1608
LCTC2R2K2125

L
L
L
L
L

1905
1906
1907
1908
1909

Inductor
Inductor
Inductor-Array
Inductor-Array
Inductor-Array

LCTC2R2K2125
LCTC2R2K2125
CTF1421
CTF1421
CTF1421

L 1910
L 1911
L 1912

Inductor-Array
Inductor
Inductor

CTF1421
LCTC2R2K2125
CTF1530

DEH-P940MP/UC

72
1

Circuit Symbol and No. Part Name Part No.


L 1913
Inductor-Array
CTF1421
L 1914
Inductor-Array
CTF1421

Circuit Symbol and No. Part Name Part No.


R 1940
RS1/16S102J
R
R
R
R
R

1943
1945
1947
1949
1951

RS1/16S223J
RS1/16S470J
RS1/16S470J
RS1/16S470J
RS1/16S470J

R
R
R
R
R

1955
1960
1961
1962
1963

RS1/16S470J
RS1/16S560J
RS1/16S560J
RS1/16S560J
RS1/16S560J

R
R
R
R
R

1966
1967
1969
1970
1973

RS1/16S560J
RS1/16S0R0J
RS1/16S472J
RS1/16S472J
RS1/16S223J

R
R
R
R

1975
1976
1977
1978

RS1/16S223J
RS1/16S222J
RS1/16S0R0J
RS1/16S0R0J

L
L
L
L
L

1915
1916
1917
1918
1919

Inductor-Array
Inductor-Array
Inductor-Array
Inductor-Array
Inductor-Array

CTF1421
CTF1421
CTF1421
CTF1421
CTF1421

L
L
L
L
L

1920
1922
1923
1924
1925

Inductor-Array
Inductor
Inductor
Inductor
Inductor

CTF1421
CTF1409
CTF1379
CTF1379
CTF1295

L
L
L
L
X

1926
1927
1929
1930
1901

Inductor
Inductor
Inductor
Inductor
Ceramic Resonator 20MHz

CTF1295
CTF1295
CTF1388
CTF1295
CSS1491

S
S
S
S
S

1901
1902
1903
1904
1905

Push Switch
Push Switch
Push Switch
Push Switch
Push Switch

CSG1111
CSG1111
CSG1111
CSG1111
CSG1111

S
S
S
S
S

1906
1907
1908
1909
1910

Push Switch
Push Switch
Push Switch
Push Switch
Push Switch

CSG1111
CSG1111
CSG1111
CSG1111
CSG1111

C
C
C
C
C

1901
1902
1904
1906
1908

S
S
S
S
S

1911
1912
1913
1914
1916

Push Switch
Push Switch
Push Switch
Push Switch
Push Switch

CSG1111
CSG1111
CSG1111
CSG1111
CSG1111

C
C
C
C
C

1909
1911
1915
1917
1918

CKSRYB105K10
CKSRYB104K25
CCSRCH102J50
CSZSR100M10
CKSRYB103K50

Push Switch
Encoder(VOLUME)

CSG1111
CSD1086

C
C
C
C
C

1920
1921
1924
1925
1926

CKSRYB224K16
CSZSR1R0M35
CCSRCH101J50
CCSRCH102J50
CCG1138

C
C
C
C
C

1931
1932
1933
1934
1935

CCSRCH101J50
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16

C
C
C
C
C

1936
1937
1938
1939
1940

CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16

C
C
C
C
C

1943
1949
1952
1953
1957

CKSRYB104K16
CKSRYB104K16
CCSRCH101J50
CCSRCH101J50
CCSRCH101J50

C 1963
C 1964
C 1965

CCSRCH101J50
CKSRYB104K16
CKSRYB104K25

S 1917
S 1918

CAPACITORS

RESISTORS
R
R
R
R
R

1901
1902
1905
1906
1907

RS1/16S222J
RS1/16S222J
RS1/16S103J
RS1/16S121J
RS1/16S2R2J

R
R
R
R
R

1908
1909
1913
1915
1916

RS1/16S222J
RS1/16S184J
RAB4C102J
RS1/16S473J
RS1/16S102J

R
R
R
R
R

1917
1918
1919
1920
1923

RS1/16S104J
RS1/16S0R0J
RS1/16S101J
RS1/16S101J
RS1/16S101J

R
R
R
R
R

1924
1925
1927
1933
1934

RS1/16S473J
RS1/16S101J
RS1/16S101J
RAB4C102J
RAB4C473J

R
R
R
R

1936
1937
1938
1939

RS1/16S473J
RS1/16S473J
RS1/16S473J
RS1/16S473J

10F/16V

10F/16V

CSZSR100M16
CKSRYB105K10
CSZSR100M10
CKSYB475K16
CCG1138

Number:
E Unit
Unit Name:Switch PCB
DEH-P940MP/UC

73
7

Circuit Symbol and No. Part Name Part No.


S 951
Switch(CLOSE)
CSN1012
S 952
Switch(OPEN)
CSN1022

Miscellaneous Parts List


A

M 1
M 2
M 951

Pickup Unit(Service)(P9MP3) CXX1550


Motor Unit(SPINDLE)
CXB6007
Motor Unit(LOADING/CARRIAGE) CXB5903
Fan Motor
CXM1194
Motor(AUTOMATIC FLAP) CXM1085

DEH-P940MP/UC

74
1

6. ADJUSTMENT
6.1 CD ADJUSTMENT
1) Precautions
This unit uses a single power supply (+3.3V) for the
regulator. The signal reference potential, therefore, is
connected to REFO1(approx. 1.65V) instead of GND.
If REFO1 and GND are connected to each other by
mistake during adjustments, not only will it be impossible to measure the potential correctly, but the servo
will malfunction and a severe shock will be applied to
the pick-up. To avoid this, take special note of the following.
Do not connect the negative probe of the measuring
equipment to REFO1 and GND together. It is especially important not to connect the channel 1 negative
probe of the oscilloscope to REFO1 with the channel 2
negative probe connected to GND.
Since the frame of the measuring instrument is usually at the same potential as the negative probe, change
the frame of the measuring instrument to floating status.
If by accident REFO1 comes in contact with GND,
immediately switch the regulator or power OFF.
Always make sure the regulator is OFF when connecting and disconnecting the various filters and wiring
required for measurements.
Before proceeding to further adjustments and measurements after switching regulator ON, let the player
run for about one minute to allow the circuits to stabilize.
Since the protective systems in the unit's software are
rendered inoperative in test mode, be very careful to
avoid mechanical and /or electrical shocks to the system when making adjustment.

The RFI and RFO signals are easy to oscillate because


of a wide band. When observing them, insert a resistor of about 1 k to the series.

This equipment will not guarantee the load ejection


operation when the mechanical unit is turned upside
down. In particular, if the ejection operation is incorrectly performed and recovery is disabled, the recovery is enabled by resetting a product or turning ACC
off to on.
2) Test Mode
This mode is used for adjusting the CD mechanism
module of the device.
Test mode starting procedure
Reset while pressing the 4 and 6 keys together.
Test mode cancellation
Switch ACC, back-up OFF.
After pressing the EJECT key, do not press any other
key until the disk is completely ejected.

If the ] or [ key is pressed while focus search is in


progress, immediately turn the power off (otherwise
the actuator may be damaged due to adhesion of the
lenses).
Jump operation of TRs other than 100TR continues
after releasing the key. CRG move and 100TR jump
operations are brought into the Tracking close status when the key is released.
Powering Off/On resets the jump mode to Single
TR(91), the RF AMP gain setting to 0 dB, and the
automatic adjustment value to the initial value.
C

- When checking the CD mechanism, adjust the position of the CD mech module by using
a booster (or height adjuster) as shown below to prevent its connectors from being stretched.

CD Mechanism Module
Connector
Booster (or height adjuster)

DEH-P940MP/UC
5

75
7

- Flow Chart
[4]+[6]+Reset

[KEY]

Test Mode In

Contents
Display

A
[CD] or [SOURCE]
Source On
TRK

MIN

[BAND]

[3]

Power On
(T. offset is adjusted)
TRK00 MIN00 SEC00

[BAND]

TRK

MIN

(T. offset is not adjusted)


TRK 99 MIN99 SEC 99

[3]
Focus Close /
S. curve check

Power Off
SEC

TRK

91 MIN91 SEC91

[2]
RF AMP
Gain switching*1

Power On

TRKGGMINGGSECGG

[1]

[]]

Tracking Servo
Close

CRG+

[6]
Focus Mode switching*2
TRK

0x MIN0x SEC 0x

TRK

or

[BAND]

[1]
T.CLS and F,T AGC
and RF AGC and

Power Off
TRK

MIN

Applicable servomechanism
TRKxx MINxx SECxx

SEC

00 MIN00 SEC00
99 MIN99 SEC99

[6]

00 MIN00 SEC00
99 MIN99 SEC 99

TRK

or

TRK ?? MIN ?? SEC ??

[[]

TRK8x MIN8x SEC8x

TRK8x MIN8x SEC8x

TRK 9x MIN9x SEC 9x

[1]
F,T,RF AGC /

Power Off
TRK

MIN

*7
F.Bias display switching
TRK

SEC

?? MIN?? SEC??

[3]

TRK

CRG/TR jump value


switching

xx MINxx SEC xx

TRK

CRG+/TR Jump+

xxMIN xxSEC xx

TRK

[2]
T.Balance adjustment /
T.Balance coefficient display
TRK ?? MIN?? SEC ??

[2]

[[]
*4

*5

*4

Tracking Open

CRG-/TR Jump-

xxMIN xxSEC xx

TRK

xxMIN xxSEC xx

TRK

or

[2]

[BAND]

Tracking Open

Power Off
TRK

MIN

SEC

TRK8x MIN8x SEC8x

or

C
*1)

TYP
TRK

MIN SEC

+12dB
12 MIN12SEC12

TRK

[Key]

TRK 9x MIN9x SEC 9x

Operation
Test Mode

*2)

*3)

Focus Close setting


TRK
00MIN00SEC 00
or TRK99MIN99SEC 99

F.Offset
Display

T.Offset
Display

S. curve check setting


TRK

01MIN01SEC 01

F. EQ measurement setting
TRK

[BAND]

02MIN02SEC 02
[]]
[[]

Switch to the order of the original display

*5

Single TR
91 MIN91SEC 91
TRK
or
81 MIN81SEC 81
TRK

32TR
92 MIN92SEC 92
TRK
or
82 MIN82SEC 82

100TR
93 MIN93SEC 93
TRK
or
83 MIN83SEC 83
TRK

CRG Move
94 MIN94SEC 94
TRK
or
84 MIN84SEC 84
TRK

F.AGC
Gain

T.AGC
Gain

F.Bias

RF AGC
Gain

CRG -/TR Jump(Direction of the internal surface)

RF Gain switching/Offset adjustment display/


T.Balance adjustment/T.OPN

[3]

F.CLS,S.Curve/Rough Servo and RF AGC/


F,T,RF AGC

SPDL 1X/2X switching


(Double-speed compatibility only)

Error rate measurement

*6) Only at the time of CRG move or 100TR jump


*7) TRK/MIN/SEC

CRG +/TR Jump+


(Direction of the external surface)

AGC,AGC display switching

[2]
TRK

Power On/Off

T.CLS and AGC and Applicable servomechanism/

[1]
*4) 1TR/32TR/100TR

F.Mode switching/T.CLS/CRG,TR
Jump switching

[6]
*8) CRG motor voltage = 2 [V]

DEH-P940MP/UC

76
1

?? MIN?? SEC??

TRK 9x MIN 9x SEC 9x

[]]

[6]

F,T AGC,F.Bias
and RF AGC

or

TRK

TRK

CRG-

or

[BAND]

00 MIN00 SEC00
99 MIN 99 SEC 99

TRK

or

[]]

RF AGC coefficient display

TRK xx MINxx SEC xx

[2]
Automatic adjustment value
*3
display switching

*8

CRG+

[3]
RF AGC /

Applicable servomechanism

CRG-

TRK

TRK

T.Close and

[[]
*8

8x MIN8x SEC8x
9xMIN 9xSEC 9x

TRK

6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT

Note :
The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted
PU unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if
the PU unit must be changed, the grating should be checked using the procedure below.

Purpose :
To check that the grating is within an acceptable range when the PU unit is changed.
Symptoms of Mal-adjustment :
If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform
track search operations, or taking a long time for track searching.
Method :
Measuring Equipment
Measuring Points
Disc
Mode

Oscilloscope, Two L.P.F.


E, F, REFO1
ABEX TCD-782
TEST MODE

CD CORE UNIT(S9MP3)

L.P.F.
E

Xch
100k
390pF

REFO1

100k
390pF

REFO1

REFO1
L.P.F.
F

Ych

Oscilloscope

Checking Procedure
1. In test mode, load the disc and switch the 5V regulator on.
2. Using the ] and [ buttons, move the PU unit to the innermost track.
3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the fourth
press.
4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase difference is within 75 . Refer to the photographs supplied to determine the phase angle.
5. If the phase difference is determined to be greater than 75 try changing the PU unit to see if there is any
improvement. If, after trying this a number of times, the grating angle does not become less than 75 then the
mechanism should be judged to be at fault.
Note
Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be
seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle.
Hint
Reloading the disc changes the clamp position and may decrease the "wobble".
D

DEH-P940MP/UC
5

77
7

Ech Xch 20mV/div, AC


Fch Ych 20mV/div, AC

Grating waveform

30

45

60

75

90

DEH-P940MP/UC

78
1

6.3 TEST MODE


- Error Messages
If a CD is not operative or stopped during operation due to an error, the error mode is turned on and cause(s) of the
error is indicated with a corresponding number. This arrangement is intended at reducing nonsense calls from the
users and also for facilitating trouble analysis and repair work in servicing.

(1) Basic Indication Method


1) When SERRORM is selected for the CSMOD (CD mode area for the system), error codes are written to DMIN (minutes display area) and DSEC (seconds display area). The same data is written to DMIN and DSEC. DTNO remains
in blank as before.
2) Head unit display examples
Depending on display capability of LCD used, display will vary as shown below. xx contains the error number.
8-digit display

6-digit display

4-digit display

ERRORxx

ERRxx

Exx

(2) Error Code List


Displayed error code Description of the code and potential cause(s)
Code Class
Electricity Carriage Home NG
CRG can't be moved to inner diameter.
10
SERVO LSI Communication Error

CRG can't be moved from inner diameter.


Failure on home switch or CRG move mechanism.

11

Electricity

Focus Servo NG

Communication error between microcomputer and SERVO LSI.


Focusing not available.
Stains on rear side of disc or excessive vibrations on REWRITABLE.

12

Electricity

Spindle Lock NG
Subcode NG

Spindle not locked. Sub-code is strange (not readable).


Failure on spindle, stains or damages on disc, or excessive vibrations.
A disc not containing CD-R data is found.
Turned over disc are found, though rarely.
CD signal error.
AGC protection doesn't work. Focus can be easily lost.

17

Electricity

Setup NG

30

Electricity

Search Time Out

Failed to reach target address.


CRG tracking error or damages on disc.

44

Electricity

ALL Skip

50

Mechanism CD On Mech Error

Skip setting for all track.


(CD-R/RW)
Mechanical error during CD ON.
Defective loading motor, mechanical lock and mechanical sensor.

A0

System

Damages or stains on disc, or excessive vibrations on REWRITABLE.

Power Supply NG

Power (VD) is ground faulted.


Failure on SW transistor or power supply (failure on connector).

Remarks: Mechanical errors are not displayed (because a CD is turned off in these errors).
Unreadable TOC does not constitute an error. An intended operation continues in this case.
Upper digits of an error code are subdivided as shown below:
1x: Setup relevant errors, 3x: Search relevant errors, Ax: Other errors.

DEH-P940MP/UC
5

79
7

6.4 DISPLAY TEST MODE


Introduction
The existing retail OEL models are equipped with a test mode, wherein all displays are displayed for the microcomputer's test mode. For the this series, however, the display test mode is expanded to include verifications for writing the
flash memory since a flash memory is installed to accommodate the PC link kit.
A

Types of test modes


(1) All displays.
(2) Data address bus connectivity verification and Kanji ROM as well as flash ROM bus lines connectivity verification.
(3) Flash ROM writing verification
Data is written in the flash ROM, and verification is conducted to determine that the writing of the data is conducted
properly.
Operation specification
1. Turning the test mode ON and OFF
The display test mode is turned on by performing a reset start while pressing the 1 and 3 keys. A once only beep
tone will be emitted.
Display when the test mode is ON (first time only)

TEST
B

A TEST display image is generated by the internal processing of the microcomputer.


Press the RESET key or turn off the ACC, to turn the display test mode OFF.
2. Switching the display test mode
The type of display test mode can be switched by pressing the BAND key while the display test mode is ON. When a
mode switch is performed, a beep tone will be emitted once.
All displays

Data address bus connectivity verification

Flash ROM writing verification


It takes about one to two seconds for the system to display the results of the flash ROM writing test.
Examples of data address bus connectivity verification results displays

ROM_DATA_BUS
ROM_ADRS_BUS
FLASH_DATA_BUS
FLASH_ADRS_BUS

Verification of connectivity of Kanji ROM and data bus.


Verification of connectivity of Kanji ROM and address bus.
Verification of connectivity of flash memory and data bus.
Verification of connectivity of flash memory and address bus.

OK
OK
OK
OK

When an error occurs during a connectivity verification, the NG will be displayed.


Examples of flash ROM writing verification displays
Writing data in FLASH memory!

TEMP region is deleted, data is written and data is read.


Examples of flash ROM writing verification results display
FLASH SETUP
FLASH WRITING
FLASH WRITING DATA

OK
OK
OK

Verification of basic operations.


Verification of flash data writing operation.
Verification of flash data reading operation.

DEH-P940MP/UC

80
1

If there is even a single error, the following types of messages will be displayed:
(1) An example of a basic operational error
FLASH SETUP
NG
(2) An example of a flash data writing error display
FLASH WRITING
NG
(3) An example of a flash data reading error display
FLASH WRITING DATA
NG
(4) An example of a flash work deletion error display(verification process completed)
FLASH SECTOR ERASE
NG

Cautions
Normal operations are enabled by pressing a key, etc., even if the system is engaged in conducting a display test
mode. Please be aware that the display test mode is merely a mode wherein the display is switched by the BAND key,
and not a special state of the system.
Important Issues:
If a data bus or an address bus error is encountered, during flash ROM verifications, DO NOT PERFORM FLASH ROM
WRITING VERIFICATIONS. Please turn OFF the ACC (since data in any region can be deleted while a writing test is conducted).
Supplimentary Information
If TEST is not displayed while the test mode is turned ON:
There may be a problem with communications between the system and the grill, or there may be abnormalities with
the OEL line or OEL itself (if a beep tone is emitted).

If the data or address bus verification yields an NG result:


Even if the BUS NG is displayed as a result of the data bus verification, it does not necessarily imply that there is an
abnormality within the data bus.
If there is an abnormality with the address bus, the data of a wrong address will be read, resulting in data abnormality.
If the flash ROM verification yields an NG result:
The Flash ROM is not accepting the commands in a normal manner, or there is an abnormality with data deletion or
writing operations.
The Flash ROM has a limited life. The guaranteed component life is 10,000 data rewrites. If the component reaches the
end of its life, it appears that an electrostatic buildup will occur and no more 0 can be written in the flash memory.

DEH-P940MP/UC
5

81
7

7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 DISASSEMBLY
A

- Removing the CaseUnit (not shown)


1. Remove the three screws and then remove the Case Unit.

- Removing the CD Mechanism Module (Fig.1)

Remove the four screws.

Disconnect the connector and then remove the


CD Mechanism Module.

CD Mechanism Module

Fig.1

- Removing the Panel Assy (Fig.2)

1
C

Remove the four screws.

Disconnect the connector and then remove the


Panel Assy.

Panel Assy

Fig.2

DEH-P940MP/UC

82
1

Slit

- Removing the Tuner Amp Unit (Fig.3)

Holder

Remove the three screws.

Insert the tips of a pair of pliers or something


like that into the slits, and remove the Holder
while pushing it with the tips.

2
1

Remove the two screws.

Remove the screw.

Straight the tabs at four locations


indicated.

Remove the two screws and then


remove the Tuner Amp Unit.

5
3

4
4

Tuner Amp Unit


- Removing the DSP Unit (Fig.4)

Fig.3

1. Remove the solder of three tabs indicated by


arrows A.

Upper Holder
A

2. Disconnect the connector and then remove


the DSP Unit.

DSP Unit

3. Remove the Upper Holder.

4. Remove the solder of tab indicated by arrow B.

Lower Holder

5. Straight the four tabs indicated by arrows B


and C, remove the Lower Holder.

C
C

Fig.4
D

DEH-P940MP/UC
5

83
7

- How to hold the Mechanical Unit


1. Hold the top and bottom frame.
2. Do not squeeze top frame's front portion too tight,
because it is fragile.
A

Do not squeeze.

- How to remove the Top and Bottom Frame

1. When the disk is in "clamp" state, unlock Spring A (6


pieces) and Spring B (2 pieces), and unscrew screws
(4 pieces).
2. Unlock each 1 of pawl at the both side of the frame,
then remove the top frame.
3. Remove the Carriage Mechanical part in such way
that; you remove the mechanical part from 3 pieces
of Damper while slowly pulling up the part.
4. Now, the top frame has been removed, and under
this state, fix the genuine Connector again, and eject
the disk.
(Caution)
When you reassemble the Carriage Mechanical part,
apply a bit of alcohol to Dampers.

Top Frame

Carriage
Mechanical
Part

Bottom Frame

Damper
C

- How to remove the Guide Arm Assy


1. Unlock the spring (1 piece) at the right side of the
assembly.
2. Unscrew screws (2 pieces), then remove the Screw
Gear Bracket.
3. Shift the Guide Arm Assy to the left and slowly rotate
it to the upper direction.
4. When the Guide Arm Assy rotates approximately 45
degree, shift the Assy to the right side direction and
remove it.

Screw Gear Bracket


Guide Arm
Assy

Spring

DEH-P940MP/UC

84
1

- How to remove the CD Core Unit(S9MP3)


1. Give jumper-solder treatment to the Flexible Wire of
the Pickup unit, then remove the wire from the
Connector.
2. Remove all 4 points of solder-treatment on the Lead

Jumper-Solder
CD Core Unit
(S9MP3)
A

Wire. Also, unscrew the screw(1 piece).


3. Then, Remove the CD Core Unit(S9MP3).
(Caution)
Be careful not to damage SW when you reassemble
the CD Core Unit(S9MP3) into the device.

Solder

- How to remove the Loading Arm Assy


1. Unlock the spring (1 piece) and remove the E ring (1
piece) of the Fulcrum Shaft.
2. Shift the arm to the left side direction and unlock pins
(2 pieces).

Loading Arm Assy

- How to remove the Pickup Unit


1. Unscrew 2 pieces of screws, then remove the Pulley
Cover.

Grease Application

Pickup Unit

Grease Application

Belt

2. Remove the Feed Screw unit from the pawl of the


Feed Screw Guide (The pawl is located inside the
guide).
3. Remove the belt from the Pulley, then remove the
Pickup unit.
(Caution)

Pulley Cover

Make sure not to stain the belt with grease when you
fix the belt.
Feed Screw Guide
Grease Application

DEH-P940MP/UC
5

85
7

7.1.2 CONNECTOR FUNCTION DESCRIPTION


ANTENNA

mm MA X

HIGH/FRONT OUTPUT

MID/REAR OUTPUT

LOW/SUBWOOFER OUTPUT
1. BUS+
2. GND
3. GND
4. NC
5. BUS6. GND
7. BUS L+ INPUT
8. ASENB
9. BUS R+ INPUT
10. BUS R- INPUT
11. BUS L- INPUT

2 4 6 8 101214 16
1 3 5 7 9 1113 15

1. BACKUP
2. GND
3. ILL
4. B.REMOTE
5. ACC
6. NC
7. NC
8. MUTE
9. RL10. FL11. RL+
12. FL+
13. RR14. FR15. RR+
16. FR+

8 9 10 11
5 6

1 2 3 4

IP-BUS

DEH-P940MP/UC

86
1

7.2 IC
PD5750A
BA033SFP
PAL007A
NJU7223DL1-33
PD6380A
PD8093A
- Pin Functions (PD5750A)
Pin No.
1
2
3
4
5-7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51-55

Pin Name
TUNPDO
TUNPCK
TUNPCE
tunpce@
NC
BYTE
CNVSS
MICSENS
TELIN
RESET
XOUT
VSS1
XIN
VCC1
NMI
NC
NC
BSENS
RX2
IPPW
isens
PEE
NC
ASENBO
MUTE
TMUTE
RX
TX
BSO
BSI
BSCK
SWVDD
DPDT
KYDT
SYSPW
LOCL
PCL
LOCH
AMfm
st
SD
DALMON
currq
SDBW
RECIVE
drst
rdslk
RDT
NC

S-80826ANUP-EDP
PD5762A
TC74VHC126FT
PML011A
PD5758A
PD3430A

I/O
O
O
O
O
I
I
I
I
O
I

I
I
O
I
O
O
O
O
O
I
O
I
O
O
I
O
O
O
O
I
I
I
O
I
O
O
I
I

PDG267A
S-80835ANUP-EDZ
BA5996FM
UPD63760GJ
MSM51V4265EP-70TS
S-818A33AUC-BGN

BA25BC0WFP
PE5269A
PD9023A
UPD61002GC

Function and Operation


PLL data output
PLL clock output
PLL chip enable output
PLL chip enable output2
Not used
External data BUS width select
Processor mode select
Microphone sense input
Cellular mute input
Reset input
Crystal oscillating element connection pin
GND
Crystal oscillating element connection pin
Power Supply
Not used
Not used
Not used
Back up sense input
IP-BUS data input 2
IP-BUS power supply control output
Illumination sense input
Beep tone output
Not used
IP-BUS slave ACC sense output
Mute output
Not used
IP-BUS data output
IP-BUS data input
P-BUS data output
P-BUS data input
P-BUS serial clock
Grille:Chip enable output
Grille:Display data output
Grille:Key data input
System power supply control output
TUNER:Local "L" output
Clock adjustment output
TUNER:Local "H" output
Not used
TUNER:FM stereo input
TUNER:SD input
For consumption low-current output
Not used
Not used
Not used
Not used
Not used
Not used
Not used

DEH-P940MP/UC
5

87
7

Pin No.
56
57
58
59-61
62
63
64
65
66
67
68
69
70
71
72
73
74
75,76
77
78
79
80
81
82
83-87
88
89
90
91
92
93
94
95
96
97
98
99
100

Pin Name
ILMPW
FLPILM
NC
NC
VCC2
NC
VSS2
ROMCK
ROMDATA
BSRQ2
ROMCS
brxen
brst
bsrq
dsens
NC
asens
NC
DSPMODE
FLPOPN
FLPCLS
FLPPW
FOPENSW
FCLSSW
NC
AANT
TESTIN
NC
OELPW
NC
MODEL
NC
NC
AVSS
SL
VREF
AVCC
TUNPDI

I/O
O
O
O

Function and Operation


Illumination power supply control output
Inside of flap illumination output
Not used
Not used
Power supply(5V)
Not used
GND
ROM correction clock output
ROM correction data output
P-BUS communication request output
ROM correction chip select output
P-BUS communication input / output
P-BUS reset output
P-BUS communication request input
Grille detach sense input
Not used
ACC power sense input
Not used
DSP set input
Auto flap open output
Auto flap close output
Auto flap motor driver ON/OFF output
Auto flap open sense input
Auto flap close sense input
Not used
Not used
Test program input
Not used
OEL module power supply control output
Not used
Model sense output
Not used
Not used
Connect to GND
Signal level input
A/D converter standard voltage
A/D converter power supply
PLL data input

O
O
O
O
I/O
O
I
I
I
I
O
O
O
I
I
O
I
O
O
I
I
I

*PD5750A
31

50

51

30

IC's marked by * are MOS type.


Be careful in handling them because they are very
liable to be damaged by electrostatic induction.

80
100

81

DEH-P940MP/UC

88
1

7
19
20 21
22
23

SWITCH

18

P-GND4

17

VIN

GND

VDD

NC

-+

Mute circuit

Protector;
Over current limit

Offset
Detection

+-

OUT4-

16

MUTE

15
-+

OUT4+

+-

VCC

Offset
Detection

Protector;
Thermal

Reference

OUT3-

14

OUT3+

Protector;
Short circuit

Offset
Detection

-+

P-GND3

12 13

AC-GND

11

IN3

10

IN4

IN2

S-GND

IN1

SVR

5
+-

OUT1+

P-GND1

-+

OUT1-

VCC

amp_vcc

+-

OUT2+

Offset
Detection

Stand-by
Circuit

Protector;
Over voltage

sw_vcc

STBY

OUT2-

P-GND2

TAB

VC

5
8

BA033SFP

Reference
voltage

PAL007A

amp_vcc

sw_vcc

stby

24 25

DEH-P940MP/UC

89

*NJU7223DL1-33

Short circuit
protector
A

VOUT

Thermal
Shutdown

VIN

-+
VREF

GND

*PD6380A
A15

48 A16

A14

47 byte

A13

46

A12

45 DQ15/A-1

A11

A10

A9

A8

NC

NC

10

we

11

reset

12

NC

13

NC

14

Vss

44 DQ7
43 DQ14

A-1,A0-A18 : Address input


DQ0-DQ15 : Data input/output
ce : Chip enable
oe : Output enable
we : Write enable
reset : Hardware reset
RY/by : Ready/Busy output
byte : 8bit, 16bit mode select
Vcc : Supply voltage
Vss : GND
NC : Not used

42 DQ6
41 DQ13
40

DQ5

39 DQ12
38 DQ4
37 Vcc
36 DQ11
35 DQ3
34 DQ10

RY/by 15
A18

16

33 DQ2

A17

17

32 DQ9

A7

18

31 DQ1

A6

19

30 DQ8

A5

20

29

DQ0

A4

21

28

oe

A3

22

27 Vss

A2

23

26 ce

A1

24

25 A0

DEH-P940MP/UC

90
1

A20

A19

A8

A9

A10

A11

A12

A13

A14

A15

A16

byte

Vss

D15/A-1

D7

D14

D6

D13

D5

D12

D4

Vcc

*PD8093A

44

43

42

41

40

39

38

37

36

35

34

33

32

31

30

29

28

27

26

25

24

23

10

11

12

13

14

15

16

17

18

19

20

21

22

NC

A18

A17

A7

A6

A5

A4

A3

A2

A1

A0

ce

Vss

oe

D0

D8

D1

D9

D2

D10

D3

D11

D15/A-1 : Data output / Address input


A0-A20 : Address input
D0-D14 : Data output
ce : Chip enable
oe : Output enable
byte : Mode switch
Vcc : Power supply
Vss : GND

*S-80826ANUP-EDP

VREF

OUT

VDD

VSS

DEH-P940MP/UC
5

91
7

- Pin Functions (PD5762A)


Pin No.
1,2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20-23
24
25
26
27
28
29
30
31
32
33
34-36
37
38
39
40
41
42
43
44-49
50
51
52-55
56
57-59
60
61
62
63
64
65
66
67-73
74
75
76
77
78
79,80

Pin Name
NC
VST
VDT
VCK
CNVSS
MCKRQ
MUTERQ
RESET
XO
VSS
XI
VDD
NMI
BMUTEIN
NC
BRST
AQTEST
MUTEIN
NC
DSPOUT
DSPIN
DSPCK
NC
BSO
BSI
BSCK
NC
BSRQ
BRXEN
NC
DSPOK
NC
TESTIN
DSPPW
NC
MICSENS
DSENS
NC
ROTB
ROTA
NC
DSPRST
NC
DIGANA
MCKOUT
NC
DSPMS
DSPLAT
DSPRDY
EMPHIN
NC
NOISE
AVSS
NC
VREF
VDD
NC

I/O
O
O
O
I
O
I
O
I

I
I
I
I
O
I
O
O
I
I/O
I/O
I/O
O
I
O
I
I
I
I
O
I
O
O
O
I
I
I

Function and Operation


Not used
Strobe pulse output for electronic volume
Data output for electronic volume
Clock output for electronic volume
CNVss
Master clock request input
Mute output
Reset input
System clock output
GND
System clock input
Power supply
Not used
Digital source clock error input
Not used
P-BUS reset input
AEQ estimation mode start request
System mute input
Not used
DSP serial data output
DSP serial data input
DSP serial clock output
Not used
P-BUS serial data output
P-BUS serial data input
P-BUS serial clock input/output
Not used
P-BUS service request output
P-BUS reception enable input/output
Not used
DSP initialize
Not used
Test program mode input
DSP power supply output
Not used
MIC sense input
Detach sense input
Not used
Rotary volume input B
Rotary volume input A
Not used
DSP system reset
Not used
CD digital/analog information
Master clock output
Not used
SONY DSP master/slave select output
SONY DSP latch output
SONY DSP I/F ready/busy input
Emphasis data input
Not used
ASL noise input
A/D converter GND
Not used
A/D converter reference voltage
Power supply
Not used

DEH-P940MP/UC

92
1

*PD5762A

8 3Y

9 3A

10 3oe

60

11 4Y

61

12 4A

14 VCC

80
1

13 4oe

*TC74VHC126FT

20

ADCVDDREF

In 1L

In 1R

In 2L

In 2R

In 3L

In 3R

42

41

40

39

38

37

36

35

34

Zero-cross logic

bypass line

Output-selector
(4ch independent control)

DC: 4.15V % 1.65V


AC: 2Vr ms%0.8Vr ms

Bypass
-gain

*b
BypassSelector

Input -gain-adjuster

CDL +

31 SCL

*b

CODEC- IF

CassR

7 GND

Level-selector

CassL

6 2Y

32 SDA

Reference-voltagegenerator

(4-inputs independent-control)

(6ch independent contr ol )

33 MUTE
VDD

SIGGN D

5 2A

Out2R

43

GND

4 2oe

Out2L

44

PML011A

V33

3 1Y

1 oe

Out1R

40

Out1L

21

2 1A

41

30 SEL
29 SPKR1L

Zero-cross detect

Input-source-selector

CD-

Digital-control

(6ch independent control)

(4-inputs independent-control)

Volume

27 SPKR2L

SPKR3R

SPKR3L

SPKR2R

SPKR2L

*b

SPKR1R

Linedriv er-amplifier
SPKR1L

Quasi differential
stereo input circuit

differential mono
input circuit

differential mono
input circuit

level-shift

level-shift

envelope-detector

Quasi differential
stereo input circuit

CDR+

28 SPKR1R

Mix

(6ch independent control)

26 SPKR2R

12

13

14

15

16

17

18

19

20

21

22
PGND

23 OUTPUTREF

VCC

11

VDD

Navi+

GND

24 SPKR3R

AM-IF

10

MPX-RDS

Navi-

AM

25 SPKR3L

Tuner-

FM

Phone-

FM -level

AM-level

Phone+

DEH-P940MP/UC
5

93
7

- Pin Functions (PD5758A)


Pin No.
1
2-4
5
6
7
8,9
10
11
12
13
14
15
16-24
25-28
29
30
31-35
36
37
38
39
40
41
42
43
44
45,46
47-59
60
61
62
63-69
70
71-86
87
88
89
90
91-93
94
95
96
97
98
99
100

Pin Name
CS
NC
REMin
BYTE
CNVSS
NC
RESET
XOUT
VSS1
XIN
VCC1
NMI
NC
KS3-0
KYDT
DPDT
NC
FLBUSY
RDY
NC
HOLD
NC
BCLK
RD
NC
WR
CS0,1
A21-9
VCC2
A8
VSS2
A7-1
NC
D15-0
NC
OELON
STBY
FL12ON
KD3-1
AVSS
KD0
VREF
VCC3
BSDATA
NC
BSCK

I/O
O
I
I

I
O
I
I
I/O
O
I
I
I

O
O
O
O
O
O
O
I/O
O
O
O
I
I

I/O

Function and Operation


ROM correction chip select output
Not used
Remote control reception input
External data BUS width select input
GND
Not used
Reset input
Crystal oscillating element connection pin
GND
Crystal oscillating element connection pin
VDD
NMI input
Not used
Key strobe input / output 3-0
Key data output
Display data input
Not used
Flush memory ready / busy
OEL driver ready input
Not used
VDD pull up
Not used
OEL controller BCLK output
RD pin
Not used
WR pin
Chip select input 0,1
Address bus Output 21-9
VDD
Address bus Output 8
GND
Address bus Output 7-1
Not used
Data bus input/output 15-0
Not used
OEL controller pin
Flash memory stand by output
Flash memory protect output
Key data input 3-1
GND
Key data input 0
GND
VDD
ROM correction data input / output
Not used
ROM correction clock output

DEH-P940MP/UC

94
1

*PD3430A
75

48

33

*PD5758A

76

100

32

49

17

64
16

50

26

51

25

- Pin Functions (PD3430A)


Pin No.
1-4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20,21
22,23
24
25
26
27
28
29
30,31
32,33
34
35,36
37
38
39
40
41,42
43
44,45
46,47
48
49
50
51-56
57
58
59-64

Pin Name
DB12-15
IR
CS1
CS0B
WRB
RDB
BCLK
RDYB
CSOUT
VCC3
GND
VCC5
GND
CKD
UCKA
LS
UADL0,1
UADR0,1
PVCCK
UCD
VCC3
GND
LCD
LCKA
LADL0,1
LADR0,1
SEGCKA
SEGAD0,1
VCC5
GND
VCC3
GND
PVCSEL0,1
TESTRAM
TESTSEL0,1
PNLSEL0,1
T
W
RB
DB0-5
GND
VCC3
DB6-11

I/O
I/O
I
I
I
I
I
I
O
O

O
O
O
O
O
O
O

O
O
O
O
O
O

I
I/O

I/O

Function and Operation


Data bus input / output
Instruction register selection input
Chip select 1 input
Chip select 0 input
Write strove input
Read strove input
Bus clock input
Ready signal output
Outside chip select output
3.3V power supply
GND
5V power supply
GND
Serial data clock output
The anode drive clock output
Synchronizing line signal output pin
Anode serial data output
Anode serial data output
Not used
Cathode serial data output
3.3V power supply
GND
Not used
Not used
Not used
Not used
Not used
Not used
5V power supply
GND
3.3V power supply
GND
Not used
Not used
Not used
Not used
Test pin
Test pin
Reset input
Data bus input / output
GND
3.3V power supply
Data bus input / output

DEH-P940MP/UC
5

95
7

- Pin Functions(PDG267A)
Pin No.
1
2-15
16-21
22-24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67-69
70
71-73
74
75
76
77
78
79
80

Pin Name
VSS
TD0-13
TST0-5
JPE1-3
VDD
AVS3
AOUTL1
AVD3
AOUTR1
AVD5
AVS5
AVD1
AVS1
LREF
LIN
AVS7
AVD7
AOUTL2
AVDX
XTLO38
XTLI38
AVSX
AOUTR2
AVD8
AVS8
RIN
RREF
AVS2
AVD2
AVS6
AVD6
AOUTL3
AVD4
AOUTR3
AVS4
VSS2
XRST
BFOT
SCK
REDY
TRDT
XLAT
RVDT
XS24
VDD2
VSS3
SO1-3
SOUT
SI1-3
SIN
BCK
LRCK
XMST
VDD3
AVSP
XPLLEN

I/O
I
I
I

O
O

O
I

O
O
I
O

I
O

O
O

I
O
I
O
O
I
I
I

O
O
I
I
I/O
I/O
I

Function and Operation


Digital GND
GND
GND
GND
Digital power supply 3.3V
DA converter1 GND
SWLch output
DA converter1 power supply
SWRch output
DA converter1 power supply
DA converter1 GND
AD converter Lch power supply
AD converter Lch GND
Connect to Pass -con for AD converter
Lch analog input
DA converter2 GND
DA converter2 power supply
Rear Lch output
Analog power supply for master clock
Crystal oscillator circuit output
Crystal oscillator circuit input
Analog GND for master clock
Rear Rch output
DA converter2 power supply
DA converter2 GND
Rch analog input
Connect to capacitor for AD converter
AD converter Rch GND
AD converter Rch power supply
DA converter3 GND
DA converter3 power supply
Front Lch output
DA converter3 power supply
Front Rch output
DA converter3 GND
Digital GND
System reset input "L":Reset
Master clock output
Shift clock input of micro computer interface
Forward permission signal output
Data output of micro computer interface
Latch input of micro computer interface
Data input of micro computer interface
24bit/32bit slot select for serial data
Digital power supply
Digital GND
Serial data output1-3
Serial data output 4
Serial data input1-3
Serial data input
Serial bit forward clock of serial input/output data
Sampling frequency clock of serial input/output data
Master/Slave mode select input
Digital power supply
PLL GND
PLL Enable

DEH-P940MP/UC

96
1

Pin No.
81
82
83
84
85-94
95
96
97
98
99
100

Pin Name
PLCLK
XECKSTP
AVDP
VSS4
TD14-23
VDD4
AVSD
SCLI
BIM
TSDRAM
AVDD

I/O
O
I

Function and Operation


PLL clock output
PLL clock output control
PLL power supply
Digital GND
GND
Digital power supply
DRAM GND
GND
GND
GND
DRAM power supply

I
I
I

PDG267A

*S-80835ANUP-EDZ
31

50
51

30

VSS

NC

VREF

80

OUT

VDD

100

81

DEH-P940MP/UC
5

97
7

- Pin Functions(BA5996FM)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28

Pin Name
VR
OPIN2(+)
OPIN2(-)
OPOUT2
OPIN1(+)
OPIN1(-)
OPOUT1
GND
MUTE
POWVCC1
VO1(-)
VO1(+)
VO2(-)
VO2(+)
VO3(+)
VO3(-)
VO4(+)
VO4(-)
POWVCC2
GND
CNT
LDIN
OPOUTSL
OPINSL
OPOUT3
OPIN3(-)
OPIN3(+)
PREVCC

Function and Operation


Input pin for reference voltage
Input pin for non-inverting input for CH2 preamplifier
Input pin for inverting input for CH2 preamplifier
Output pin for CH2 preamplifier
Input pin for non-inverting input for CH1 preamplifier
Input pin for inverting input from CH1 preamplifier
Output pin for CH1 preamplifier
Ground pin
Mute control pin
Power supply pin for CH1, CH2, and CH3 at "Power" stage
Driver CH1 - Negative output
Driver CH2 - Positive output
Driver CH2 - Negative output
Driver CH2 - Positive output
Driver CH2 - Positive output
Driver CH2 - Negative output
Driver CH4 - Positive output
Driver CH4 - Negative output
Power supply pin for CH4 at "Power" stage
Ground pin
Control pin
Loading input
Output pin for preamplifier for thread
Input pin for preamplifier for thread
CH3 preamplifier output pin
Input pin for inverting input for CH3 preamplifier
Input pin for non-inverting input for CH3 preamplifier
PreVcc

BA5996FM
14

15

28

DEH-P940MP/UC

98
1

- Pin Functions (UPD63760GJ)


Pin No.
1
2
3-7
8-15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40, 41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68

Pin Name
R.GND
rst
AB12-8
AD7-0
cs
ASTB
read
write
wait
INTQ
IFMODE
D.VDD
xtalen!
xtalen@
DA.VDD
ROUT
DA.GND
R+
RREGC
LL+
DA.GND
LOUT
DA.VDD
X.VDD
XTAL1
xtal!
X.GND
xtal@
XTAL2
X.VDD
D.GND
DIN
DOUT
SCKIN
SCKO
LRCKIN
LRCK
TESTX
RFOK
C16M
TESTEN
TEST4
D.VDD
RFCK/HOLD
WFCK/MIRR
PLCK
LOCK
C1D1
C1D2
C2D1(RMUTE)
C2D2(LMUTE)
C2D3
D.GND
ras

I/O
I
I
I/O
I
I
I
I
O
I
I
I
O
O
O
O
O
O

I
O
I
O
I
O
O
O
O
I
I
O
O
O
O
O
O
O
O
O
O

Function and Operation


GND for DRAM I/F
Input of reset
Address bus 12-8 from the microcomputer
Address/data bus 7-0 to the microcomputer
Chip selection
Address strobe
Control signals (read)
Control signals (write)
Control signals (wait)
Interruption signals to the external microcomputer
Switching between the data buses (16bit/8bit)
Power supply for digital circuits
Permission to oscillate 16.9344MHz
Permission to oscillate 24.576MHz
Power supply for DAC
Output of audio for the right channel
GND for DAC
Output of the right channel audio PWM
Output of the right channel audio PWM
Connected to the capacitor for band gap
Output of the left channel audio PWM
Output of the left channel audio PWM
GND for DAC
Output of audio for the left channel
Power supply for DAC
Power supply for the crystal oscillator
Connected to the crystal oscillator (16.9344MHz)
Connected to the crystal oscillator (16.9344MHz)
Ground for the crystal oscillator
Connected to the crystal oscillator (24.576MHz)
Connected to the crystal oscillator (24.576MHz)
Power supply for the crystal oscillator
GND for digital circuits
Input of audio data
Output of audio data
Clock input for audio data
Clock output for audio data
Input of LRCK for audio data
Output LRCK for audio data
Output for tests
Output of RFOK
Output of 16.9344MHz
Connected to GND
Connected to GND
Power supply for digital circuits
Output of RFCK/HOLD signal
Output of WFCK/MIRR signal
Output of PLCK
Output of LOCK
Information on error correction
Information on error correction
Information on error correction (mute for Rch)
Information on error correction (mute for Lch)
Information on error correction
Ground for digital circuits
Output of DRAM RAS

DEH-P940MP/UC
5

99
7

Pin No.
69
70
71
72
73-88
89
90-99
100
101-104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119, 120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144

Pin Name
cas)
cas!
we
oe
RDB0-15
D.GND
RA0-9
D.VDD
TEST0-3
FD
TD
SD
MD
A.VDD
ATEST
EFM
ASY
C3T
A.GND
RFI
AGCO
AGCI
RFO
EQ2, 1
RF2RFA.GND
A
C
B
D
F
E
A.VDD
REFOUT
REFC
FEFEO
TETEO
TE2
TEC
A.GND
LDREGO
PD
LD
PN
A.VDD

I/O
O
O
O
O
I/O

Function and Operation


Output of DRAM Lower CAS
Output of DRAM Upper CAS
Output of DRAM WE
Output of DRAM OE
Input/output of DRAM Data0-15
Ground for digital circuits
Output of DRAM Address0-9
Power supply for digital circuits
Connected to GND
Output of focus drive PWM
Output of tracking drive PWM
Output of thread drive PWM
Output of spindle drive PWM
Power supply for the analog system
Analog tests
Output of EFM signals
Input of asymmetry
Connection to the capacitor for detecting 3T
Ground for the analog system
Input of RF
Output of RF
Input of AGC
Output of RF(AGC)
Equalizer 2, 1
Reversal input of RF2
Reversal input of RF
Ground for the analog system
Input of A
Input of C
Input of B
Input of D
Input of F
Input of E
Power supply for the analog system
Output of reference voltage
Connected to the capacitor for output of REFOUT
Reversal input of FE
Output of FE
Reversal input of TE
Output of TE
TE2
TEC
Ground for the analog system
Output of REG voltage for APC
Input of PD
Output of LD
Assignment of pickup polarity
Power supply for the analog system

O
I
O
O
O
O
O
O
I

I
O
I
O
I
I
I
I
I
I
I
I
O
I
O
I
O
O
I
O
I
O
I

DEH-P940MP/UC

100
1

*MSM51V4265EP-70TS
37

72

*UPD63760GJ

36

73

108

44 VSS

DQ1

43 DQ16

DQ2

42 DQ15

DQ3

41

DQ4

40 DQ13

VCC

DQ5

39 VSS
A0-A8 :Address input
ras : Row address strobe
lcas : Lower column address strobe
ucas : Upper column address strobe
DQ1-DQ16 : Data input/data output
oe : Output enable
we : Write enable
VCC : Power supply
VSS : GND
NC : No connection

38 DQ12

DQ6

8
9

DQ8

10

NC

13

32 NC

NC

14

31 lcas

we

15

30 hcas

ras

16

29 oe

NC

17

28 A8

A0

18

27 A7

A1

19

26 A6

A2

20

25 A5

A3

21

24 A4

VCC

22

23 VSS

37 DQ11
36 DQ10
35 DQ9

BA25BC0WFP

VIN

ON/OFF

GND

*S-818A33AUC-BGN

DQ14

DQ7

144

109

VCC

+
VREF

ON/OFF

5
NC

NC

OUT

VSS

NC 3

VOUT

3
VCC

CTL

Vref

DEH-P940MP/UC
5

101
7

- Pin Functions (PE5269A)


Pin No.
1
2
3
4
5
6, 7
8
9
10
11
12
13
14-16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35

36
37
38
39
40
41
42
43
44
45
46
47
48
49
50-57
58
59
60-67
68
69
70, 71
72, 73
74
75

Pin Name
FTXD
NC
BSI
BSO
bsck
DFS1, 2
DCKS
EVDD
EVSS
NC
DCOPY
crst
CBANK0-2
emph
DSPMUTE
DSET
adena
IC/VPP
BRXEN
bsrq
xtalen!
xtalen@
xrst
VDCONT
CD3VON
CONT
xwait
LOEJ
CLCONT
CDMUTE
reset
XT1

I/O
O

Format
C

I
O
I/O
O
O

C
/C
C
C

O
O
O
O
O
O
O

C
C
C
C
C
C
C

I/O
I/O
O
O
O
O
O
O
I
O
O
O
I
I

/C
/C
C
C
C
C
C
C
C
C
C

XT2
REGC
X2
X1
VSS
VDD
CLKOUT
xwrite
uben
WR/W
xread
XASTB
LOCK
wrst
AD0-7
BVDD
BVSS
AD8-15
xcs
wcs
DBBWRDY0, 1
DBBRRDY0, 1
AVDD
AVSS

O
O
O
O
O
O
I
O
I/O

C
/C

I/O
O
O
I
I

/C
C
C

Function and Operation


For rewriting Flash EP-ROM (sending signals)
Open
Input of P-Bus serial data
Output of P-Bus serial data
Input/output of P-Bus serial clock
Output 1, 2 of settings of DA I/F IC sampling frequency
Output for selection of DA I/F IC clock subharmonic number
Positive power supply for E power
Potential of GND of E power
Open
Output of settings of DA I/F IC copy flag
Output of reset control of Compression IC
Output 0-2 of bank settings of Compression IC
Output of information on emphasis
Output of DOUT Mute
Output for lighting the disc set indicator
Output of control of A/D reference voltage supply
IC: connected directly to VSS / VPP: Pull-down
P-Bus receiving enabled
Request for P-Bus service request
Output of permission to oscillate CD LSI 16.9344MHz
Output of permission to oscillate CD LSI 24.576MHz
Output of control of CD LSI reset
Output of control of VD power supply
Output of control of CD +3.3V power supply
Output of control of power supply to servo driver
Input of control signals of CD LSI wait
Output for switching between LOAD/EJECT directions
Output for switching between driver inputs
Output of control of CD Mute
Input of system reset
Connected to the oscillator for subclock
(connected to VSS via the resistor)
Connected to the oscillator for subclock (Open)
Connected to the capacity stabilizing output of the regulator
(an electrolytic capacitor of about 1F)
Connected to the oscillator for the main clock
Connected to the oscillator for the main clock
Potential of GND
Positive power supply (5V)
Output of internal system clock (Open)
Output of control signals of CD LSI light
Not used (Open)
Output of Read/Write control signals of WMA decoder
Output of read control signals of CD LSI
Output of CD LSI address strobe
Input of spindle lock
Output for reset control of WMA decoder
Address/Data Bus 0-7
B power supply, positive supply (3.3V)
B power supply, potential of GND
Address/Data Bus 8-15
Output for chip selection of CD LSI
Output for chip selection of WMA decoder
Input of write-ready flag with WMA decoder DBBI0, 1
Input of read-ready flag with WMA decoder DBBO0, 1
A power supply, positive supply (5V)
A power supply, potential of GND

DEH-P940MP/UC

102
1

Pin No.
76
77
78
79
80
81
82-85
86
87
88
89
90
91
92
93
94-96
97
98
99
100

Pin Name
AVREF
VDSENS
DSCSNS
TEMP
HOME
csens
NC
WMAARI
DRAMARI
testin
NC
xint
wint
brst
ejsw
NC
ROMDATA
ROMCS
ROMCK
FRXD

I/O

Format

I
I
I
I
I
I

I
I
I/O
O
O
I

/C
C
C

Function and Operation


Input of reference voltage for A/D converter
Input of sensing short of VD power supply
Input of sensing disc status
nput of sensing information on temperature
Input of sensing Home SW
Input of sensing the flap closed
Connected to AVDD or AVSS via the resistor
Input of sensing existence of WMA decoder & DA I/F IC
Input of sensing existence of external DRAM for CD LSI
Input with starting test program for checking chips
Connected to EVDD or EVSS via the resistor
Input of interruption signals of CD LSI
Input of interruption signals of WMA decoder
Input of reset of P-Bus
Input of Eject key
Open
Input/output of E2PROM data
Output for chip selection of E2PROM
Output of clock of E2PROM
For rewriting Flash EP-ROM (receiving signals)

Format
C

*PE5269A

Meaning
C MOS

30

50

81
80

100

51

31

*PD9023A

CS

SK

DI

DO

CS : Chip select input


SK : Serial clock input
DI : Serial data input
DO : Serial data output
GND : Ground
N.C. : No connection
VCC : Power supply

VCC

N.C.

N.C.

GND

DEH-P940MP/UC
5

103
7

- Pin Function (UPD61002GC)

Pin No.
1
2-4
5
6,7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23,24
25
26
27-32
33
34
35,36
37
38
39
40
41,42
43
44-49
50
51
52-55
56
57-59
60
61-63
64
65
66
67
68
69
70
71
72,73
74
75
76
77
78
79
80
81
82
83
84

Pin Name
VDD3
NC
GND3
NC
DO0
VDD2
CKI
DVDD
AVDD
AGND
DGND
VDD3I
LRCKO
BCKO
NC
VDD3
GND2
MCK44
MCK48
P10, 11
VDD2
GND3
P12-17
VDD2
P00/INTP00
NC
P03/INTP03
P04/INTP04
P05/INTP05
GND2
P06, 07
VDD3
HAD0-5
GND3
VDD3
HAD6-9
GND3
HAD10-12
VDD2
HAD13-15
VDD3
HAST
HCSB
HR/WB
HDSTB
GND2
NC
EXTDIR
DBBWRDY0, 1
DBBRRDY0
VDD2
GND3
DBBRRDY1
GND3
RESETB
GND3
VDD3
GND3
PLLCONT
GND3

I/O
I/O

Function and Operation


Power supply (3.3V)
Not used
GND
Not used
PCM output data
Power supply (2.5V)
Clock input
Power supply (PLL) (Digital)
Power supply (PLL) (Analog)
GND (PLL) (Analog)
GND (PLL) (Digital)
Interface terminal protection
PCM output LRCK
PCM output bit clock
Not used
Power supply (3.3V)
GND
Audio master clock input
Audio master clock input
Port
Power supply (2.5V)
GND
Port
Power supply (2.5V)
Port
Not used
Port
Port
Port
GND
Port
Power supply (3.3V)
Host address / Data bus
GND
Power supply (3.3V)
Host address / Data bus
GND
Host address / Data bus
Power supply (2.5V)
Host address / Data bus
Power supply (3.3V)
Host address strobe
Host chip select
Host read / Write status
Host data strobe
GND
Not used
Bus direction flag from external
DBB write ready flag
DBB read ready flag
Power supply (2.5V)
GND
DBB read ready flag
GND
Reset
GND
Power supply (3.3V)
GND
PLL control
GND

O
I

O
O

I
I
I/O

I/O
I/O
I/O
I/O
I/O
I/O
I/O

I/O
I/O
I/O
I
I
I
I

I
O
O

O
I

DEH-P940MP/UC

104
1

Pin No.
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100

Pin Name
NC
GND2
DI3
LRCKI3
BCKI3
DI2
LRCKI2
BCKI2
DI1
LRCKI1
BCKI1
VDD2
DI0
LRCKI0
BCKI0
GND2

I/O

I
I
I
I
I
I
I
I
I
I
I
I

Function and Operation


Not used
GND
PCM input data
PCM input LRCK
PCM input bit clock
PCM input data
PCM input LRCK
PCM input bit clock
PCM input data
PCM input LRCK
PCM input bit clock
Power supply (2.5V)
PCM input data
PCM input LRCK
PCM input bit clock
GND

76

100

*UPD61002GC
B

75

25

51
50

26

DEH-P940MP/UC
5

105
7

- FM/AM Tuner Unit


FM/AM 1ST IF 10.7MHz
T51 Q51 CF51 CF52 CF53

AMRF
28

AMANT

MPXREF 41kHz
AMDET

ATT

L ch

IC 2 FM MPX

6
R ch

ANT ADJ
FMANT
27
RFGND
26

COMP

IC1
MIXER, IF AMP, DET.

LDET

21
18

ATT
FMRF
CF202

11 12 15 16

13

STIND

NL2

NL1

FMSD

SL

SDBW

CE1

CK

NC

24

CE2

CREQ

DI/DO

NC

NC

7 17 20 22 10 19 14

FMLOCL

25

WC

RF ADJ
LOCL

LOCH
23

VDD
VCC

DGND

IC 3
EEPROM

IMG ADJ AM 2ND IF X901


450kHz 10.25MHz

No. Symbol I/O Explain


1 STIND O stereo
indicator
2 FMSD
O FM station
detector

"Low" when the FM stereo signals are received.


To be pulled up to the "VDD" at 47k.
"High" when signals are received. To be pulled up to the "VDD" at 47k
Meanwhile, 10k should be used when taking diver FIX trigger from here
and "High: 0.9VDD or more" and "Low: 250mV or less".
(Should satisfy the diver IC specifications)
3 NL1
O noise level-1
"High" when noise is received. Output for the RDS. GND at 47k //1,800pF.
4 NL2
O noise level-2
"High" when noise is received. Output for the RDS. GND at 36k //330pF.
5 Rch
O R channel
FM stereo "R-ch" signal output or AM audio output.
output
Add the specified de-emphasis constant.
6 Lch
O L channel
FM stereo "L-ch" signal output or AM audio output.
output
Add the specified de-emphasis constant.
7 WC
write control
EEPROM write control. Writing permissible at "Low". Normally open.
8 SDBW O SD bandwidth
SD bandwidth signal output. For detection of detuning data for the RDS.
9 NC
Not used
10 VDD
power
Power supply pin for the digital section.
supply
DC 5V +/- 0.25V. Be careful about overlapping noise in the logic section.
11 DGND
digital ground
Grounding for the digital section.
12 CE2
I
chip enable-2
EEPROM chip enable. Active a "Low"
To be pulled up to the "VDD" at 47k
13 SL
I/O signal level
Received FM/AM signal level (strength) output.
Connect the specified load resistor and capacitor (10k + 39k //4,700pF)
14 DI/DO
I/O data input/
Data input/Data output
data output
To be pulled up to the "VDD" at 47k
15 CK
I
clock
Clock input To be pulled up to the "VDD" at 47k
16 CE1
I
chip enable-1
AFRF chip enable. Active at "High" To be grounded at 47k
17 NC
Not used
18 LDET
O lock detector
Active at "Low". To be pulled up to the "VDD" at 47k
19 CREQ
I
current request
Active at "Low". To be grounded at 47k
20 NC
Not used
21 COMP O composite signal FM composite signal output. r out < 100
22 VCC
power supply
Analog section power supply pin.DC 8.4V +/- 0.3V
23 LOCH
I
local high
FM local high pin. When seeking local high, apply 5V together with "LOCL".
24 FMLOCL I
FM local low
FM local low pin. When seeking local low, apply 5V to the base of the NPN
transistor with which the specified resistor is being connected to the emitter.
Keep it open in case of ordinary marketed models.
25 LOCL
I
local low
FM/AM local low pin. When seeking local low, apply 5V to the base of the
NPN transistor. Since this pin is exclusive for AM when the FMLOCL is in use,
do not drive it under FM.
26 RFGND
RF ground
Grounding for the antenna section.
27 FMANT I
FM antenna input FM antenna input. 75. Surge absorber (DSP-201M-S00B) is necessary.
28 AMANT I
AM antenna input AM antenna input. High impedance.
Connect to the antenna through an L (LAU type) of 4.7H.To cope with the
power transmission line hums, insert a series circuit consisting of an L
(a coil of about 100mH) + R (a resistor of 470 to 2.2k) between the GND.

DEH-P940MP/UC

106
1

7.3 OPERATIONAL FLOW CHART


Power ON

VDD=5V
Pin 16/62/98/99

bsens
Pin 20
BSENS=L
asens
Pin 74
ASENS=L
dsens
Pin 72

DSENS=L
ASENBOH
Pin 26
Starts
communication
with Grille
microcomputer.

SWVDDH
Pin 34
Source keys
operative

300ms

300ms
In case of the above signal, the communication
with Grille microcomputer may fail.
If the time interval is not 300msec, the oscillator
may be defective.

Source ON

SYSPWH
Pin 37

Completes power-on operation.


(After that, proceed to each source operation)
D

DEH-P940MP/UC
5

107
7

7.4 CLEANING

Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools:
A

Portions to be cleaned
CD pickup lenses

Cleaning tools
Cleaning liquid : GEM1004
Cleaning paper : GED-008

Portions to be cleaned
Fans

Cleaning tools
Cleaning paper : GED-008

DEH-P940MP/UC

108
1

8. OPERATIONS
Head unit
VOLUME

RESET button

5//2/3 buttons

EJECT button

SOURCE button

Multi-function buttons

BACK button

BAND button
NEXT button

Steering remote controller


A steering remote controller that enables remote operation of the head unit is supplied. Operation is
the same as when using buttons on the head unit.

ATT button
This lets you quickly
lower volume level (by
about 90%). Press
once more to return to
the original volume
level.
BAND button

SOURCE button
2/3 buttons

5/ buttons

VOLUME
Raise or
lower the
volume.

AUDIO button

FUNCTION button

DEH-P940MP/UC
5

109
7

110

Note:
External unit refers to a Pioneer product (such as
one available in the future) that, although incompatible as a source, enables control of basic functions
by this product. Two external units can be controlled by this product, although External is displayed whether you select external unit 1 or external
unit 2. When two external units are connected, the
allocation of them to external unit 1 or external unit
2 is automatically set by this product.

In this manual, for operations using the multifunction buttons the function displayed is used
as the name of the function button.

Important

The explanations given in this manual are


based on FORM 1 display. If you have selected
FORM 2, the functions of some of the multifunction buttons may be different from those
indicated in the manual.

Multi-function buttons

Function names

SOFT KEY operation means that the function of


a button changes as indicated on the display.
The multi-function buttons provide SOFT KEY
operation; the functions performed by the buttons change according to the function or setting
that has been selected.

SOFT KEY operation

When this products blue/white lead is connected to


the cars auto-antenna relay control terminal, the
cars auto-antenna extends when this products
source is switched on. To retract the antenna,
switch the source off.

With the switch to the function menu, the


functions of the multi-function buttons also
change simultaneously.

2. Press FUNC to enter the function menu.

Press NEXT repeatedly until FUNC


appears.

1. Press NEXT to display FUNC.

Here the random play function of the built-in


CD player is used as an example to illustrate
operation of the multi-function buttons.

Example of multi-function button operation

Note:
The number of functions or displays switched
through will differ according to the source or menu
selected.
When no function is indicated for a button, that button is not currently active.

Press NEXT repeatedly to switch between


the following functions:

Press NEXT to display the desired functions (e.g., built-in CD player).

The 3 indicator shows that the multi-function


buttons have functions other than those currently displayed. When this indicator is visible,
press NEXT to switch through the functions of
the multi-function buttons.

Switching the function of the multi-function buttons

Pressing the BACK button cancels the current


menu or mode and returns to the previously
selected menu or mode.

BACK button

Note:
When the source is the Tuner, TV tuner or DAB
tuner and no menu or mode is selected, pressing
the BAND button has the effect of switching bands.

Pressing the BAND button immediately cancels


the current menu or mode, and returns to the
basic displays.

BAND button

The difference between the BAND button


and the BACK button

Note:
You can also turn random play on or off by pressing
5 or in the random mode.
If you do not operate the function within about 30
seconds, the display is automatically returned.

When the function menu is exited, the functions of the multi-function buttons also
change simultaneously.

5. Press BACK to exit the function menu.

Press RDM again to turn random play off.


The light goes off.

The light illuminates.

4. Press RDM to turn random play on.

3. Press RDM to select the random mode.

4. Press and hold SOURCE to turn the


source off.

3. Turn VOLUME to adjust the volume.

When you press VOLUME, it extends outward so that it becomes easier to turn. To
retract VOLUME, press it again.

2. Press VOLUME to extend the VOLUME


outward.

Press SOURCE repeatedly to switch


between the following sources:
Built-in CD player (MP3/WMA) = TV tuner
= Tuner = DAB tuner = XM tuner = MultiCD player = External unit 1 = External unit
2 = AUX

1. Press SOURCE to select the desired


source (e.g., tuner).

You can select the source you want to listen to.


To switch to built-in CD player, load a CD in this
product.

C
In the following cases, the sound source will not
change:
* When no product corresponding to the source is
connected to this product.
* No disc is set in this product.
* No magazine is set in the multi-CD player.
* AUX (auxiliary setting) is set to off.

Turning a source on or off

Basic Operation

Basic Operation

1
4

DEH-P940MP/UC

Note:
In this manual, operation for each mode is given
mainly in terms of the multi-function buttons.
However, in each mode, when the key guidance
indicators are lit it is also possible to use 5//2/3
to operate the mode.

w t

w e

3. Turn VOLUME to adjust the volume.

When you press VOLUME, it extends outward so that it becomes easier to turn. To
retract VOLUME, press it again.

2. Press VOLUME to extend the VOLUME


outward.

Press SOURCE until Tuner appears.

1. Press SOURCE to select the tuner.

Basic operation

qBand
wLOC indicator
ePreset number
rFrequency
tStereo indicator

FORM 2

FORM 1

Display and indicators

Tuner

Note:
Up to 18 FM stations, six for each of the three FM
bands, and six AM stations can be stored in memory.

The station is stored in memory under the


selected button.

2. When you find a station that you want to


store in memory, press and hold any of
the buttons 1 6 until the preset number
stops flashing.

Press NEXT until 1 6 appears.

1. Press NEXT to display 1 6.

Storing broadcast stations

If you press any of the buttons 1 6, you can


easily store up to six broadcast stations for later
recall.

stations

Storing and recalling broadcast

Note:
The stereo indicator lights when a stereo station is selected.

The frequencies move up or down step by


step.
If you press and hold 2 or 3 for about one
second and release, you can perform seek
tuning. Seek tuning lets you skip broadcasting stations until a broadcast strong
enough for good reception is found.
If you press and hold 2 or 3, you can skip
broadcasting stations. Seek tuning starts
as soon as you release the button.

5. Press 2 or 3 to tune in to a station.

Press BAND repeatedly to switch between


the following bands:
FM-1 = FM-2 = FM-3 = AM

4. Press BAND to select the desired band.

Key guidance indicators

This products display features key guidance


indicators. These light to indicate which of the
5//2/3 buttons you can use. When youre in
the function menu, audio menu or the other
menus, they also make it easy to see which
5//2/3 buttons you can use to switch functions on/off, switch repeat selections and perform other operations.

Key guidance indicator

Display example (e.g., built-in CD player)

Basic Operation

5
7
8

DEH-P940MP/UC

111

112

2
e

DEH-P940MP/UC

You can eject the CD by pressing and holding


EJECT with opening the front panel when the CD
loading or ejecting cannot operate properly.

Note:
You can select CD as the source by pressing
SOURCE when a disc is loaded in this product.
When the front panel is open, multi-function buttons are not available.
Do not insert anything other than a CD into the CD
loading slot.
A CD left partially inserted after ejection may incur
damage or fall out.
If a CD cannot be inserted fully or playback fails,
make sure the recorded side is down. Press the
EJECT and check the disc for damage before reinserting it.
If the built-in CD player cannot operate properly, an
error message (such as ERROR-12) appears on
the display.

Do not use with the front panel left open. If the


front panel is left open, it may result in injury
in the event of an accident.

WARNING:

The front panel opens and the CD is ejected.


Be sure to close the front panel by pressing EJECT after removing the CD.

6. Press EJECT to eject the CD.

Pressing 3 skips to the start of the next


track.
Pressing 2 once skips to the start of the current track. Pressing again will skip to the
previous track.
If you press and hold 2 or 3, you can perform fast forward or reverse.

5. Press 2 or 3 to select a track.

4. Turn VOLUME to adjust the volume.

When a CD is inserted, the front panel closes automatically.

2. Insert a CD into the CD loading slot.

1. Press EJECT to open the front panel.

The built-in CD player plays one standard 12


cm or 8 cm (single) CD at a time. Do not use an
adapter when playing an 8 cm CD.

Basic operation

qSource name
wTrack number
eDisc title
rPlay time
tTrack title

FORM 2

When you press VOLUME, it extends outward so that it becomes easier to turn. To
retract VOLUME, press it again.

3. Press VOLUME to extend the VOLUME


outward.

FORM 1

Display and indicators

Built-in CD Player
1
4

7
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.

Fuse resistor

Orange/white
To lighting switch terminal.

Left

Subwoofer

Rear speaker

Rear speaker

Front speaker

Front speaker

Green/black

Green

White/black

White

Subwoofer

Rear speaker

Rear speaker

Right

Front speaker

Front speaker

Perform these connections when using a


different amp (sold separately).

Violet/black

Violet

Gray/black

Gray

System remote control

Power amp
(sold separately)
Power amp
(sold separately)

Power amp
(sold separately)

Connecting cords with RCA pin


plugs (sold separately)

Black (ground)
To vehicle (metal) body.

Fuse resistor

Fuse holder

Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.

Yellow
To terminal always supplied with
power regardless of ignition switch
position.

Yellow/black
If you use a cellular telephone,
connect it via the Audio Mute lead on
the cellular telephone. If not, keep the
Audio Mute lead free of any
connections.

IP-BUS cable

Front output (HIGH/FRONT OUTPUT)

Rear output
(MID/REAR OUTPUT)

Subwoofer output
(LOW/SUBWOOFER OUTPUT)

Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal (max.
300 mA 12 V DC).

15 cm
(5/8 inch)

23 cm (7/8 inch)

15 cm
(5/8 inch)

IP-BUS input (Blue)

This Product

Multi-CD player
(sold separately)

DSP switch
Switch the DSP switch as
illustration below.

15 cm (5/8 inch)

Antenna jack

Connection diagram for standard mode

5
8

DEH-P940MP/UC

113

También podría gustarte