Documentos de Académico
Documentos de Profesional
Documentos de Cultura
AIM:
The main of this project is to provide intelligent security system in a community.
PURPOSE:
The purpose of the project is to design a wireless data transfer system with high
security to overcome the existing traditional system. The traditional monitoring and
alarming nets are based on sundry wired net technologies such as field bus, CAN bus and
RS422. The existing equipments on the basis of wired nets are automatic wired itinerant
monitoring nets, in which the data from detecting nodes are linked to all the transmitting
modules via wires. In such a signal transmitting plan, the long transmission lines will
generate high cost, long project time and difficult repair work.
SENSOR UNIT:
POWER SUPPLY
BUZZUR
IR SENSOR
MICRO
CONTROLLER
TEMPURATURE
SENSOR
GSM
MODEM
SMOKE SENSOR
Email: info@purpletechnosolutions.com
www.purpletechnosolutions.com
9030880909/101/202/505/606
MONITROING UNIT:
Email: info@purpletechnosolutions.com
www.purpletechnosolutions.com
9030880909/101/202/505/606
LCD
POWER SUPPLY
PC
MICRO
CONTROLLER
ZIGBEE
EEPROM
GSM
MODEM
Email: info@purpletechnosolutions.com
www.purpletechnosolutions.com
9030880909/101/202/505/606
DESCRIPTION:
In intelligent community, security incidents such as robber, fire and patrol alarms
in some important places must be reported and handled in time. The traditional monitoring
and alarming nets are based on sundry wired net technologies such as field bus, CAN bus
and RS422. The security state data from smoking sensors, infrared sensors and panic
buttons will be detected and transferred to monitoring center. The existing equipments on
the basis of wired nets are automatic wired itinerant monitoring nets, in which the data
from detecting nodes are linked to all the transmitting modules via wires. In such a signal
transmitting plan, the long transmission lines will generate high cost, long project time and
difficult repair work. The wireless sensor network based on Zigbee technology is
developed to solve the defects of existing monitoring and alarming system. In the wireless
system, all the data will be transmit in wireless method. Since the real-time measuring data
could be transmit to monitoring center via wireless network, the operation staff will only
sit in the office to check up the system running state.
TECHNOLOGY:
ZIGBEE:
Zigbee is new wireless technology guided by IEEE 802.15.4 Personal Area
Network standard. It is primarily designed for the wide range controlling applications and
to replace the existing non-standard technologies. It currently operates in 868 MHz band at
a data rate of 20Kbps in Europe, 914MHz band at 40kbps in USA, and the 2.4GHz ISM bands
Worldwide at a maximum data-rate of 250kbps. It is used to verify whether users
truncation is possible or not. One of the main advantages of this ZIGBEE communication is
that it provides a noise free communication, the amount of noise added in this type of
communication is very less compared to the other wireless communications.
Email: info@purpletechnosolutions.com
www.purpletechnosolutions.com
9030880909/101/202/505/606
SOFTWARES USED:
1. Embedded C
2. Keil IDE
3. ISP or U-Flash
4. Express PCB
HARDWARE COMPONENTS:
1. Micro controller
2. Sensors (IR, Smoke, Temperature)
3. Zigbee Transceiver
4. LCD
5. GSM
RESULT:
By using this project the secured data collection done wirelessly and controlling will
be there.
Email: info@purpletechnosolutions.com
www.purpletechnosolutions.com
9030880909/101/202/505/606
Email: info@purpletechnosolutions.com
www.purpletechnosolutions.com
9030880909/101/202/505/606