Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Software
Version 2.3.5365.1
Company:
Engineer:
Project:
Address:
Phone:
E-mail:
Date:
Page:
13/11/2014
1/5
Project description:
Location:
Fastening description:
Base Material
Concrete: Normal-weight C30/37
Concrete thickness, h [mm]: 350
State: Cracked
Compressive strength, fck.cube [N/mm]: 37.00
Temperature range: 24/43
Hole condition: Dry or Wet
Reinforcement
Straight edge reinf. + stirrups (a 100 mm)
Reinforcement to control splitting provided: No
Normal reinforcement: Yes
Base Plate
Length x Width x Thickness [mm]: 360 x 280 x 12
Yield stress: 235.00 N/mm
Profile type/size: IPE 200
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc.
5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com
Anchor Designer
Software
Version 2.3.5365.1
Company:
Engineer:
Project:
Address:
Phone:
E-mail:
Date:
Page:
13/11/2014
2/5
<Figure 2>
Recommended Anchor
Anchor Name: SET-XP - SET-XP M20 - 5.8
Code Report Listing: ETA-11/0360
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc.
5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com
Company:
Engineer:
Project:
Address:
Phone:
E-mail:
Anchor Designer
Software
Version 2.3.5365.1
Date:
Page:
13/11/2014
3/5
Shear load x,
V xSd [kN]
Shear load y,
V ySd [kN]
1
2
3
4
36.34
36.34
0.00
0.00
3.75
3.75
3.75
3.75
0.00
0.00
0.00
0.00
3.75
3.75
3.75
3.75
Sum
72.67
15.00
0.00
15.00
<Figure 3>
gMs
NRd,s [kN]
123.00
1.50
82.00
hef [mm]
tRk [N/mm2]
N0Rk,p [kN]
20
280
3.00
52.78
NRd,p = NRk,p /gMp = N0Rk,p(Ap,N / A 0p,N)Ys,NpYg,NpYec,NpYre,Np /gMp [Eq. 3.2 & 5.2]
A p,N [mm2]
A 0p,N [mm2]
Ys,Np
Yg,Np
Yec,Np
Yre,Np
N0Rk,p [kN]
gMp
NRd,p [kN]
184752
213333
0.895
1.193
1.000
1.000
52.78
2.10
23.23
N0Rk,c [kN]
7.2
37.00
205.20
280
NRd,c = NRk,c /gMc = N0Rk,c(Ac,N / A 0c,N)Ys,NYre,NYec,N /gMc [Eq. 3.2 & 5.3]
A c,N [mm2]
A 0c,N [mm2]
Ys,N
Yre,N
Yec,N
N0Rk,c [kN]
gMc
NRd,c [kN]
336000
705600
0.807
1.000
1.000
205.20
2.10
37.56
A 0c,N [mm2]
Ys,N
Yre,N
Yec,N
N0Rk,c [kN]
Yh,sp
gMsp
NRd,sp [kN]
672000
2822400
0.754
1.000
1.000
205.20
1.044
2.10
18.31
5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com
Company:
Engineer:
Project:
Address:
Phone:
E-mail:
Anchor Designer
Software
Version 2.3.5365.1
V Rk,s [kN]
gMs
V Rd,s [kN]
61.00
1.25
48.80
Date:
Page:
13/11/2014
4/5
A p,N [mm2]
A 0p,N [mm2]
Ys,Np
Yg,Np
Yec,Np
Yre,Np
N0Rk,p [kN]
2.0
280752
213333
0.895
1.342
1.000
1.000
52.78
A c,N [mm2]
A 0c,N [mm2]
Ys,N
Yre,N
Yec,N
N0Rk,c [kN]
gMc
V Rd,cp [kN]
432000
705600
0.807
1.000
1.000
205.20
1.50
111.24
d [mm]
hef [mm]
V 0Rk,c [kN]
1.70
20
0.14
0.07
280
37.00
150
41.69
V Rd,c = V Rk,c /gMc = V 0Rk,c(Ac,V/ A 0c,V)Ys,VYh,VYa,VYec,V Yre,V /gMc [Eq. 3.2 & 5.8]
A c,V [mm2]
A 0c,V [mm2]
Ys,V
Yh,V
aV
Ya,V
Yec,V
Yre,V
V 0Rk,c [kN]
155250
101250
1.000
1.000
90.0
2.500
1.000
1.400
41.69
gMc
1.50
V Rd,c [kN]
149.14
6. Results
Proof of Tensile and Shear Failure and Interaction [Sec. 5.2.4]
Action Load, NSd [kN]
Resistance, NRd [kN]
Tension
Steel
36.34
82.00
Pullout
72.67
23.23
Concrete Cone
72.67
37.56
Splitting
72.67
18.31
Shear
Steel
Pry-out
Concrete Edge
Interaction check
a
bN + bV
Resistance, V Rd [kN]
3.75
15.00
7.50
48.80
111.24
149.14
bN = NSd/NRd
3.97
bV = V Sd/VRd
0.13
a
1.0
Ratio
0.44
3.13
1.94
3.97
Status
Pass
Fail
Fail
Fail (Governs)
Ratio
0.08
0.13
0.05
Status
Pass
Pass (Governs)
Pass
Ratio
4.10
Status
Fail
FAIL! Selected anchor type and embedment do not meet the selected design criteria.
7. Installation
Effective embedment depth, hef [mm]: 280
Concrete thickness, h [mm]: 350
Drilled hole diameter, d0 [mm]: 24
Drilled hole depth, h1 [mm]: 280
Installation torque, Tinst [Nm]: 80.00
Base plate thickness, tfix [mm]: 12
Fixture hole diameter [mm]: 22
Installation instruction:
http://dop.strongtie.eu/ETA/ETA-11_0360_en.pdf
8. Warnings
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc.
5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com
Anchor Designer
Software
Version 2.3.5365.1
Company:
Engineer:
Project:
Address:
Phone:
E-mail:
Date:
Page:
13/11/2014
5/5
- Designer must exercise own judgement to determine that the requirements in TR 029 Section 6 "Serviceability limit state" and Section 7
"Additional proofs for ensuring the characteristic resistance of concrete member" are fulfilled where required.
- Per TR 029 Section 5.2.2.5, splitting failure is avoided during anchor installation by complying with minimum values for edge distance Cmin,
spacing S min, member thickness hmin and reinforcement as given in the relevant ETA.
- Designer must exercise own judgement to determine if this design is suitable.
- Refer to manufacturers product literature for hole cleaning and installation instructions.
9. Contact Information
--- Simpson Strong-Tie United Kingdom --Simpson Strong-Tie
Winchester Road
Cardinal Point
Tamworth
Staffordshire
B78 3HG
United Kingdom
Tel: +44 1827 255 600
E-mail: uktechnical@strongtie.com
www.strongtie.co.uk
--- Simpson Strong-Tie Australia --Simpson Strong-Tie
1/11 Kenoma Place
Arndell Park
NSW 2148
Australia
Tel. : (61) 02 9831 7700
Fax : (61) 02 9831 2726
Email : Engineering.au@strongtie.com
www.strongtie.com.au
--- Simpson Strong-Tie New Zealand --Simpson Strong-Tie
28 Arrenway Drive
Albany
Auckland 0632
New Zealand
Tel. : (64) 9 477 4440
Fax : (64) 9 475 9724
Email : Engineering.nz@strongtie.com
www.strongtie.co.nz
--- Simpson Strong-Tie South Africa --Simpson Strong-Tie
Unit 5
Fairway Business Park Stibitz Street
West Lake Business Park 7934
Cape Town, Western Province
South Africa
Tel. : (27) 087 354 0629
Fax : (27) 021 702 3679
Email : Engineering.za@strongtie.com
www.strongtie.co.za
Input data and results must be checked for agreement with the existing circumstances, the standards and guidelines must be checked for plausibility.
Simpson Strong-Tie Company Inc.
5956 W. Las Positas Boulevard Pleasanton, CA 94588 Phone: 925.560.9000 Fax: 925.847.3871 www.strongtie.com