Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Ref: A&M/SCL/342266/R0
16th July, 2014
M/s. SHESHASAI CHEMICALS LTD,
Visakhapatnam,
Andhra Pradesh
(M.RAMA KRISHNA)
9848186200
Encl.:As above
INDEX
SCOPE OF SUPPLY
HEATER
One Heat exchanger consisting of two closely wound helical concentric coils
arranged to give three passes on flue gas side made out of ERW tubes
confirming to BS: 3059 Part I suitable for high temperature
One Single jacketed to enclose the heat exchanger coil dully insulated with
mineral wool and coated with color coated sheets
AUXILIARIES
One Dust protected, prewired wall mounted air cooled control panel housing a
Burner Management System, Switch gear consisting of contactors,
Overload relays, fuses/ MCB etc
One Centrifugal Thermic fluid circulating pump suitable for high temperaure
operation, directly to an electric motor, mounted on a common base frame
One Deaerator-cum-expansion tank consisting of expansion, Deaerator and buffer
vessels, gauge glass assembly and level switch. Nozzles are provided for inlet &
outlet on deaerator, for drain on buffer vessel and for overflow,air vent & top
up on expansion vessel
One Monobloc Pressure Jet spill return ON/OFF burner suitable for light
oil(HSD) with inbuilt combustion blower assembly along with motor and
high voltage spark ignition for burner light up. The blower will be mounted
with fuel oil pump
FUEL
Oil Line
One
THERMIC FLUID
One spring loaded flow relief valve for mounting on Thermic outlet line.
THERMIC FLUID
Inlet and Outlet flanges of Thermic fluid circulating pump
Inlet and outlet flanges of headers of the heater
Inlet and outlet of flow relief valve
Inlet and outlet connections of Deaerator vessel
Inlet of expansion tank for topping up
Vent connection on expansion tank
Overflow connection on expansion tank
Drain connection on buffer vessel
PERFORMANCE CRITERIA
THERMIC FLUID
Shell Heat Transfer Oil S2 for bulk oil temperature up to 300 Deg C
Diesel Oil (HSD)
Net Calorific Value Flash Point
Water Content
Kinematic Viscosity Pour Point
Sediment
Sulphur
-
10,500 Kcal/Kg
32C
0.05% Vol.(Max.)
2.5 cst @ 50C
5C
1% Wt Max.
1 % Wt Max.
ELECTRICAL
415 Volts6%, 50 Hz3%, 3 phase, 4 wire system and 240 Volts6%, 50 Hz3%, 1 phase
for control circuit
AMBIENT CONDITIONS
Ambient/Room temperature minimum 20C, Altitude maximum 600 meter above
sea level
* Note: Fuels to confirm to enclosed IS specification.
EXCLUSIONS
combined
deaerator-cum-expansion
TPCM - 02
2,00,000
280C
- Fuel
HSD/LDO
87 2 %
- Electrical supply
Rs. 4, 49,000/-
3 % extra
4.
PAYMENT TERMS
40% advance along with the order.
Balance payment along with taxes and duties against Proforma invoice prior to
dispatch.
5.
DELIVERY PERIOD
The equipment shall be ready for delivery at our works in 9 Weeks from the
date of technically and commercially clear order with requisite advance.
6.
VALIDITY
The offer is open for acceptance for a period of 30 days from this date.
*** Note: we request you to release your purchase order on M/s. Thermax Limited,
Hyderabad