Documentos de Académico
Documentos de Profesional
Documentos de Cultura
-2-
DALLAS, TEXAS
-3-
6. Sparkproof
when
scrapping
or hitting
metal.
2. Slick surface
eliminates caking
of product.
7. Tolerant to a
wide range of
temperatures
(-120 to
+180 F.)
3. Impact tough
but flexible to
give when
coming in
contact with
tramp material.
8. Forty-five degree
angle for better cup
fill and discharge.
4. Unique design to
cure back-legging.
9. Built in give so
that leading edges
will not abrade
away or cut product
of any kind.
SS BUCKET
Plastic resin used is approved by Food & Drug
Administration for food handling.
Animal By-Products
Citrus Pulp
Fertilizer
Salt
Brewery Products
Coffee
Nuts
Seeds
DALLAS, TEXAS
Cherries
Feed and Grain
Pickles
Sugar
-4-
This photo indicates the clean superior discharge of Dura-Buket plastic buckets. Pictured
is a 9 x 6 plastic Dura-Buket running on a 30 head pulley at 62 RPMs for a belt speed
of 487 FPM. This is an LP style bucket spaced on 4-3/8 centers.
STYLE SS
STYLE LP
MATERIALS
HD POLYETHYLENE
URETHANE
NYLON
SPECIAL RESINS
COLOR
Black or White
Red
Tan
As available
APPLICATION
Heavy abrasion,
sticky materials
TEMPERATURE
RANGE
-120F to +180F
(210F intermittent)
-60F to +180F
(210F intermittent)
-60F to +300F
(350F intermittent)
As required
FDA APPROVED
MATERIAL
Yes
Yes
Available upon
request
As required
COMMENTS
Economical, high density polyethylene. FDA approved material for handling food grade
products.
DALLAS, TEXAS
-5-
LENGTH
PROJECTION
5
X
CENTERS
DEPTH
L*
Length
P
Projec.
D
Depth
4X3
5X4
6X4
7X4
6X5
7X5
8X5
9X5
8X6
9X6
10X6
11X6
12X6
13X6
10X7
11X7
12X7
13X7
14X7
15X7
16X7
12X8
14X8
16X8
18X8
4-1/4
5-1/4
6-1/4
7-1/4
6-3/8
7-3/8
8-3/8
9-3/8
8-3/8
9-3/8
10-3/8
11-3/8
12-3/8
13-3/8
10-3/8
11-3/8
12-3/8
13-3/8
14-3/8
15-3/8
16-3/8
12-3/8
14-3/8
16-3/8
18-3/8
3-1/8
4-1/8
4-1/8
4-1/8
5-1/4
5-1/4
5-1/4
5-1/4
6-3/8
6-5/8
6-3/8
6-3/8
6-3/4
6-3/4
7-3/8
7-3/8
7-3/8
7-3/8
7-3/8
7-3/8
7-3/8
8-3/8
8-3/8
8-3/8
8-3/8
3
3-3/4
3-3/4
3-3/4
4-7/8
4-7/8
4-7/8
4-7/8
6-1/4
6-1/4
6-1/4
6-1/4
6-1/2
6-1/2
7-1/4
7-1/4
7-1/4
7-1/4
7-1/4
7-1/4
7-1/4
8-1/4
8-1/4
8-1/4
8-1/4
PUNCHING **
Top Back Number
C
To E
of
Centers Centers
Holes
2-1/4
3-3/16
4-3/8
2-11/16
4-3/8
2-5/8
3-1/16
3-1/4
3-1/16
3-1/2
4
3
3-3/8
3-5/8
4
3
3-3/8
3-5/8
3
3-1/4
3-1/2
3-3/8
3
3-1/2
3-1/8
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-1/2
1-1/2
1-1/2
1-3/4
1-1/2
2
2
2
2
2
3
2
3
3
3
3
3
3
4
4
4
3
4
4
4
5
5
5
4
5
5
6
Size
Bolt
Holes
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
10.4
24.4
30.8
33.6
47.1
61.6
67.7
69.6
104.4
124.5
128.2
147.7
172.1
196.5
175.8
210.5
223.2
236.8
269.7
284.4
289.9
272.5
324.7
362.5
404.9
11.0
29.9
33.1
36.7
52.0
62.4
69.8
77.1
107.7
132.2
145.8
157.9
183.6
208.7
187.3
216.7
241.1
244.8
290.1
295.0
304.8
299.9
364.8
407.6
440.6
STYLE SS SPACING
USABLE CAPACITY
DALLAS, TEXAS
24
24
24
24
24
24
24
24
24
24
24
24
12
12
24
24
12
12
12
12
12
12
12
12
12
-6-
PROJECTION
LENGTH
5
E
X
DEPTH
CENTERS
L*
Length
P
Projec.
D
Depth
4X3
5X4
6X4
7X4
6X5
7X5
8X5
9X5
8X6
9X6
10X6
11X6
12X6
13X6
10X7
11X7
12X7
13X7
14X7
15X7
16X7
12X8
14X8
16X8
18X8
4
5-1/8
6-1/8
7-1/8
6-1/8
7-1/8
8-1/8
9-1/8
8-1/8
9-1/8
10-1/8
11-1/8
12-1/8
13-1/8
10-1/8
11-1/8
12-1/8
13-1/8
14-3/8
15-1/8
16-1/8
12-1/8
14-1/8
16-1/8
18-1/4
3-1/8
4-1/8
4-1/8
4-1/8
5-1/4
5-1/4
5-1/4
5-1/4
6-3/8
6-5/8
6-3/8
6-3/8
6-3/4
6-3/4
7-3/8
7-3/8
7-3/8
7-3/8
7-3/8
7-3/8
7-3/8
8-3/8
8-3/8
8-3/8
8-3/8
3
3
3
3
3-3/4
3-3/4
3-3/4
3-3/4
4-1/2
4-1/2
4-1/2
4-1/2
5
5
5-1/4
5-1/4
5-1/4
5-1/4
5-1/4
5-1/4
5-1/4
5-3/4
5-3/4
5-3/4
5-3/4
PUNCHING **
Top Back Number
To E
of
C
Holes
Centers Centers
2-1/4
3-3/16
4-1/4
2-5/8
4-1/4
2-5/8
3-1/16
3-1/4
2-11/16
3-1/2
4
2-7/8
3-1/4
3-5/8
4
3
3-1/4
3-5/8
4
2-5/8
2-5/8
3-1/4
4
2-5/8
3-1/8
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
Size
Bolt
Holes
2
2
2
3
2
3
3
3
3
3
3
4
4
4
3
4
4
4
4
6
6
4
4
6
6
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
11/32
10.4
24.4
30.8
33.6
47.1
61.6
67.7
69.6
104.4
124.5
128.2
147.7
172.1
196.5
175.8
210.5
223.2
236.8
269.7
284.4
289.9
272.5
324.7
362.5
404.9
11.0
29.9
33.1
36.7
52.0
62.4
69.8
77.1
107.7
132.2
145.8
157.9
183.6
208.7
187.3
216.7
241.1
244.8
290.1
295.0
304.8
299.9
364.8
407.6
440.6
STYLE LP SPACING
USABLE CAPACITY
DALLAS, TEXAS
24
24
24
24
24
24
24
24
24
24
24
24
12
12
24
24
12
12
12
12
12
12
12
12
12
ELEVATOR BOLTS
STANDARD
DIAMETER
DIAMETER
LENGTH
#1 Standard
#1 Norway carbon steel, stainless steel
and zinc plated
SIZE,
INCHES
WEIGHT
PER 100 PCS.,
POUNDS
KEG
QUANTITIES,
PCS.
CASE
QUANTITIES,
PCS.
1/4 x 3/4
1/4 x 1
1/4 x 1-1/4
1/4 x 1-1/2
1/4 x 1-3/4
1/4 x 2
1/4 x 2-1/4
1/4 x 2-1/2
5/16 x 3/4
5/16 x 1
5/16 x 1-1/4
5/16 x 1-1/2
5/16 x 1-3/4
5/16 x 2
5/16 x 2-1/4
5/16 x 2-1/2
3/8 x 1-1/2
3/8 x 1-3/4
3/8 x 2
3/8 x 2-1/4
3/8 x 2-1/2
2.94
3.24
3.43
3.73
3.98
4.29
4.88
4.92
4.76
5.05
5.55
6.38
6.50
7.12
7.43
7.78
7.10
7.66
8.31
9.35
9.83
2400
2400
1800
1800
1200
1200
1200
1200
1200
1200
1200
900
900
900
900
900
900
600
600
600
600
1200
1200
1200
1200
1200
1200
600
600
1200
1200
1200
600
600
600
600
600
600
600
600
600
600
SABRE-TOOTH
DIAMETER
DIAMETER
LENGTH
Sabre-Tooth
#1 Norway with toothed head,
carbon steel
zinc plated and stainless steel
SIZE,
INCHES
WEIGHT
PER 100 PCS.,
POUNDS
KEG
QUANTITIES,
PCS.
CASE
QUANTITIES,
PCS.
1/4 x 3/4
1/4 x 1
1/4 x 1-1/4
1/4 x 1-1/2
1/4 x 1-3/4
1/4 x 2
1/4 x 2-1/4
1/4 x 2-1/2
5/16 x 3/4
5/16 x 1
5/16 x 1-1/4
5/16 x 1-1/2
5/16 x 1-3/4
5/16 x 2
5/16 x 2-1/4
5/16 x 2-1/2
3/8 x 1-1/2
3/8 x 1-3/4
3/8 x 2
3/8 x 2-1/4
3/8 x 2-1/2
2.94
3.24
3.43
3.73
3.98
4.29
4.88
4.92
4.76
5.05
5.55
6.38
6.50
7.12
7.43
7.78
7.10
7.66
8.31
9.35
9.83
2400
2400
1800
1800
1200
1200
1200
1200
1200
1200
1200
900
900
900
900
900
900
600
600
600
600
1200
1200
1200
1200
1200
1200
600
600
1200
1200
1200
600
600
600
600
600
600
600
600
600
600
RELIANCE
DIAMETER
DIAMETER
-7-
LENGTH
DIAMETER
SIZE,
INCHES
WEIGHT
PER 100 PCS.,
POUNDS
CASE
QUANTITIES,
PCS.
KEG
QUANTITIES,
PCS.
CASE
QUANTITIES,
PCS.
1/4 x 3/4
1/4 x 1
1/4 x 1-1/4
1/4 x 1-1/2
5/16 x 1-1/4
2.7
2.9
3.0
3.5
4.9
1200
1200
1200
1200
1200
2400
2400
1800
1800
1200
1200
1200
1200
1200
1200
Head Types
#3 Reliance, carbon steel and
zinc plated
DALLAS, TEXAS
-8-
NUTS
SIZE
INCHES
(ID)
PKG.
QTY.,
PCS.
PKG.
WEIGHT,
LBS.
1/4
5/16
3/8
100
100
100
.7
1.1
1.6
SIZE
INCHES
(ID)
PKG.
QTY.,
PCS.
PKG.
WEIGHT,
LBS.
1/4
5/16
3/8
100
100
100
.2
.4
.6
SIZE
INCHES
(ID)
PKG.
QTY.,
PCS.
PKG.
WEIGHT,
LBS.
1/4
5/16
3/8
100
100
100
.7
.7
.7
PKG.
WEIGHT,
LBS.
1/4-20
5/16-18
3/8-16
100
100
100
.7
1.1
1.6
STANDARD FLANGE
SERRATED LOCK
SIZE
INCHES
(ID)
PKG.
QTY.,
PCS.
PKG.
WEIGHT,
LBS.
1/4-20
5/16-18
3/8-16
100
100
100
.9
1.2
1.8
LARGE FLANGE
SERRATED LOCK
SIZE
INCHES
(ID)
PKG.
QTY.,
PCS.
PKG.
WEIGHT,
LBS.
1/4-20
5/16-18
3/8-16
100
100
100
1.2
2.3
2.8
SIZE
INCHES
(ID)
PKG.
QTY.,
PCS.
PKG.
WEIGHT,
LBS.
1/4-20
5/16-18
3/8-16
100
100
100
.8
1.1
2.8
SIZE
INCHES
(ID)
PKG.
QTY.,
PCS.
PKG.
WEIGHT,
LBS.
1/4-20
5/16-18
3/8-16
100
100
100
.9
1.8
2.6
Available in zinc.
SIZE
INCHES
(ID)
PKG.
QTY.,
PCS.
PKG.
WEIGHT,
LBS.
1/4
5/16
3/8
100
100
100
1.3
2.0
3.0
PKG.
QTY.,
PCS.
FENDER
SIZE
INCHES
(ID)
STANDARD HEX
SIZE
INCHES
(ID)
PKG.
QTY.,
PCS.
PKG.
WEIGHT,
LBS.
1/4
5/16
3/8
100
100
100
.3
.3
.3
SQUARE
POLY SPACERS
SIZE
INCHES
(ID)
PKG.
QTY.,
PCS.
PKG.
WEIGHT,
LBS.
1/4
5/16
1/2
100
100
100
2.0
1.8
2.0
SIZE
INCHES
(ID)
PKG.
QTY.,
PCS.
PKG.
WEIGHT,
LBS.
1/4
5/16
3/8
100
100
100
1.1
1.1
1.1
DALLAS, TEXAS
ENGINEERING SPECIFICATIONS
TABLE OF SPEEDS
10
12
16
18
20
22
24
30
36
42
48
54
60
72
84
96
85
75
55
55
55
55
50
42
42
40
40
40
40
40
34
30
224
235
230
259
286
316
314
330
395
439
503
565
628
754
748
754
-9-
160
135
100
90
85
80
80
80
80
70
65
65
60
55
50
45
WxH
33,000
420
424
418
425
443
460
502
628
769
753
817
919
942
1036
1099
1130
4-3/8
5-1/2
6-1/2
7-1/2
8-1/2
9-1/2
10
11
12
13
14
15
16
17
18
.86
.80
.75
.705
.66
in inches
Multiplier 4.00 3.69 3.43 3.20 3.00 2.74 2.40 2.18 2.00 1.85 1.71
1.00 .923
CAPACITY FORMULAS
For Bushels Per Hour:
Water Level
Capacity
spacing
number
FPM
min./hr.
cu. in./bu.
bu./hr.
of
Cup
multiplier
of row
60
2,150
water level
x __________________
x ________________
x ________________x ____________________
____________________
= __________________
________________
For Cubic Feet Per Hour:
Water Level
Capacity
spacing
number
FPM
min./hr.
cu. in./cu. ft..
bu./hr.
of Cup
multiplier
of row
60
1,728
water levels
x __________________
x ________________
x ________________x ____________________
____________________
= __________________
________________
For Tons Per Hour First determine cubic feet using above formula, then proceed as follows:
Cu. Ft./Hr.
product weight
lbs./ton
tons/hr.
Water Level
per cu. ft. (lbs.) ________________
2,000
water level
x __________________
= ________________
________________
*For Low Profile buckets, Dura-Buket division recommends that water level capacity be used for design and engineering purposes.
DALLAS, TEXAS
-10-
VENTING OPTIONS
#1 Standard Vent
Same holes in body as bolt
mounting holes, plus a hole
in each end cap.
#2 Vent
Twice as many holes in body
as bolt mounting holes.
#4 Vent
Same as #3, plus three holes
in each end cap.
#3 Vent
Same as #2, but two rows, or
four times as many holes as
bolt mounting.
C. Depth is
measured for
the overall side
profile
dimension.
B. Projection is
measured
vertically to the lip,
as it would project
from the belt or
chain.
Depth=6
Projection=6
Width=11
INSTALLATION INSTRUCTIONS
We recommend that the following instructions be followed to
assure you long lasting services.
Belt Application
1. Attach bucket to the belt with 1/4, 5/16 or 3/8 elevator bolts.
Stainless steel or plated bolts are recommended for corrosive
materials.
2. Use a leather washer between the nut and the bucket when
handling corrosive materials to facilitate the removal of rusty
elevator bolts. On other materials a leather washer is not
necessary.
BOLT
BELT
FLAT OR FENDER
WASHER
NUT
LOCK WASHER
DALLAS, TEXAS
-11-
DIMENSIONS
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
A_______________
B _______________
C _______________
D_______________
E _______________
F _______________
G ______________
H_______________
I _______________
J _______________
K _______________
L _______________
M ______________
N ______________
O ______________
P _______________
Q ______________
R _______________
J
H
B
C
A
E
N
P
R
DIGGER BUCKETS
USES
Used to extend the life of any plastic
bucket or with any materials that pack
or cake tightly in the boot section.
PURPOSE
A digger bucket clears the path through
the elevator boot section and eases the
strain on the following plastic buckets.
Digger buckets are mounted every
tenth to every fifth between the plastic
buckets and are custom-manufactured
to project 1/4 to 1/2 further than the
plastic buckets.
CC DIGGER
MATERIALS
Carbon steel or stainless steel.
DALLAS, TEXAS
-12-
CC ELEVATOR BUCKETS
Bucket Size, Inches
Bucket
Size
P
Projection
E
Centers
(Inches)
Number
of
Holes
C
(Inches)
D
(Depth)
Bolt
Sizes
(Inches)
Gauge
Approx.
Weight
(Lbs.)
Cap.
Cu.
(Inches)
Number
Per
Carton
4x3
3-3/16
2-1/2
7/8
1/4
4x4
4-3/16
2-1/2
1-3/4
1/4
16
.62
22
84
18
.90
39
5x4
3-3/16
3-3/16
1-3/4
84
1/4
18
.95
52
6x4
4-3/16
4-3/8
1-3/4
84
1/4
18
1.10
62
7x4
4-3/16
2-11/16
84
1-3/4
1/4
18
1.25
70
8x4
4-3/16
3-1/16
84
1-3/4
1/4
18
1.50
79
84
9x4
4-3/16
3-5/8
1-3/4
1/4
18
1.70
90
56
6x5
5-1/4
4-3/8
1-7/8
1/4
16
1.60
94
54
7x5
5-1/4
2-11/16
1-7/8
1/4
16
1.75
110
54
8x5
5-1/4
3-1/16
1-7/8
1/4
16
2.00
125
54
9x5
5-1/4
3-5/8
1-7/8
1/4
16
2.50
140
36
10x5
5-1/4
4-1/8
1-7/8
1/4
16
2.70
155
36
11x5
5-1/4
1-7/8
1/4
16
2.90
170
36
12x5
5-1/4
3-3/8
1-7/8
1/4
16
3.00
185
36
7x6
6-5/16
2-11/16
2-3/16
1/4
16
2.85
155
36
8x6
6-5/16
3-1/16
2-3/16
1/4
16
3.10
178
36
9x6
6-5/16
3-5/8
2-3/16
1/4
16
3.40
202
24
10x6
6-5/16
4-1/8
2-3/16
1/4
16
3.50
222
24
11x6
6-5/16
2-3/16
1/4
16
3.75
244
24
12x6
6-5/16
3-3/8
2-3/16
1/4
16
4.00
267
24
13x6
6-5/16
3-5/8
2-3/16
1/4
16
4.50
289
24
14x6
6-5/16
2-3/16
1/4
16
4.75
312
24
8x7
7-3/16
3-1/16
3-3/16
5/16
14
4.60
242
24
9x7
7-3/16
3-5/8
3-3/16
5/16
14
4.80
276
24
10x7
7-3/16
4-1/8
3-3/16
5/16
14
5.00
302
16
11x7
7-3/16
3-3/16
5/16
14
5.25
333
16
12x7
7-3/16
3-3/8
3-3/16
5/16
14
6.25
362
16
13x7
7-3/16
3-5/8
3-3/16
5/16
14
6.75
393
16
14x7
7-3/16
3-3/16
5/16
14
7.00
424
16
15x7
7-3/16
3-1/4
3-3/16
5/16
14
7.50
454
16x7
7-3/16
2-7/8
3-3/16
5/16
14
8.00
486
18x7
7-3/16
3-1/8
3-3/16
5/16
14
8.50
544
20x7
7-3/16
3-1/2
3-3/16
5/16
14
9.25
605
22x7
7-3/16
3-3/16
5/16
14
10.00
664
24x7
7-3/16
3-1/2
3-3/16
5/16
14
10.75
725
9x8
8-1/8
3-5/8
3-1/2
5/16
14
5.60
349
16
10x8
8-1/8
4-1/8
3-1/2
5/16
14
6.10
388
16
11x8
8-1/8
3-1/2
5/16
14
6.75
427
16
12x8
8-1/8
3-3/8
3-1/2
5/16
14
7.50
466
16
13x8
8-1/8
3-5/8
3-1/2
5/16
14
7.75
505
16
14x8
8-1/8
3-1/2
5/16
14
8.25
543
16
15x8
8-1/8
3-1/4
3-1/2
5/16
14
8.50
582
16x8
8-1/8
2-7/8
3-1/2
5/16
14
9.00
621
17x8
8-1/8
3-1/2
5/16
14
9.50
660
18x8
8-1/8
3-1/8
3-1/2
5/16
14
9.75
698
20x8
8-1/8
3-1/2
3-1/2
5/16
14
10.75
776
22x8
8-1/8
3-1/2
5/16
14
11.50
854
24x8
8-1/8
3-1/2
3-1/2
5/16
14
12.00
931
DALLAS, TEXAS
HANGER BEARINGS
-13-
STYLE A BEARING
C
B
A
CHOOSE
FROM ONE
BELOW
D
E
Bore
Size
A
1-1/2
2
2-7/16
3
3-7/16
2-3/16
2-3/4
3-1/4
4
4-3/4
2-1/2
3-1/8
3-11/16
4-3/8
5
1-7/8
1-15/16
2-15/16
2-15/16
3-15/16
E
1-9/16
1-9/16
2-3/8
2-5/16
3-1/16
DURA-BUKET
HANGER
BEARINGS
PLASTECH
WEARITE *
UHMW
WOOD
MATERIAL
Polyethylene
Maple
GRADE
Industrial grade
Industrial grade
METHOD OF
MANUFACTURE
Injection molded
Injection molded
Machined or molded
Machined
TEMPERATURE
OPERATING RANGE
-60F to +300F
-60F to +300F
-120F to +160F
-50F to +160F
LUBRICANT
Built-in lubricant
Built-in lubricant*
Natural
Oil impregnated
COLOR
Tan
Black
White
Brown
STYLE B BEARING
E
D
Bore
Size
A
3
3-7/16
3-7/8
4-7/16
4-13/16
5-3/8
2-7/8
3-13/16
13/16
7/8
B
C
STYLE C BEARING
Two piece bearing with rectangular upper half and double
flange lower half for Hanger Styles 16, 16B, 16C, 24, 24A,
24B, 28, 216, 216B, 216C, 216F, 230 and 316.
Call for sizes and dimensions.
DALLAS, TEXAS
-14-
Material:
Style:
Custom Flights:
Temperature:
Ordering:
Virgin Ultra High Molecular Weight (UHMW) polyethylene is white. Reprocessed UHMW polyethylene is
green. Static reduced UHMW is black. UHMW has a thickness tolerance of +/- 10%.
Drag conveyor flights are fabricated to original manufacturers design. Cut edges are square unless
otherwise noted.
Non-standard flights can be custom fabricated to your specifications. Send print or sample for fabrication of
flight.
-60 F to +225 F or -51 C to +107 C
Before ordering, please note manufacturer design, number of flights, size and thickness. If custom drag
conveyor flight is required, please have sample or drawing available.
DRAG
CONVEYOR
FLIGHTS
SIZE, INCHES
(LENGTH AND
THICKNESS)
6 x 1/4
6 x 3/8
9 x 1/4
9 x 3/8
9 x 1/2
10 x 3/8
10 x 1/2
12 x 3/8
12 x 1/2
14 x 3/8
14 x 1/2
16 x 3/8
16 x 1/2
18 x 3/8
18 x 1/2
20 x 1/2
20 x 5/8
24 x 1/2
24 x 5/8
SCREW
CONVEYOR
ESSMUELLER
COMPANY
THOMAS
CONVEYOR
JEFFREY
EHRSAM
SUPERFLO
PEERLESS
FLI-CON
MULTI-FLOW
DRACON
UHMW SHEETING
THICKNESS,
INCHES
1/8
3/16
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
3-1/2
4
WEIGHT,
POUNDS
25
38
50
75
100
125
150
200
250
300
350
400
500
600
700
800
DALLAS, TEXAS
ENMASSE
BENEFITS
Excellent abrasion resistance
Self-lubricating
Slick material surface with low coefficient of friction
High impact strength, absorbs shocks and
dampens sound
Chemically inert
USDA-FDA approved resins
(virgin only)
Easily machined
SOME LIMITATIONS
Temperature range: continuous -120 F to +185 F
intermittent +210 F
Frictional heat may be generated due to speed
and tensile load
May be cut by sharp particles impacting UHMW
High thermal coefficient of expansion
May acquire static electricity
-15-
SPLICES
MAXI-SPLICE AB
MAXI-SPLICE CI
DESCRIPTION
The Maxi-Splice is a mechanical clamping device with a simple threepiece construction. The patented design is for use on PVC and rubber
belting.
It accommodates belts of all thicknesses.
Standard splice bolts will accommodate up to 1/2 thick belting. Longer
bolts are available for thicker belts..
Each splice set accommodates two inches of belt width.
It is tested and approved by leading manufacturers of PVC and rubber
belting.
INSTALLATION
1. First ensure the belt ends are square and even. If using the splice
template tape, apply the tape to mark the punching. Be sure to apply
the tape squarely on the belt ends; then proceed to Step 4. If you are
not using the tape, go to Step 2.
2. Draw a line approximately 4-1/4 from the belt end to use as the center
line for hole punching. Proper installation for even width belts will
begin just inside the belt edge. Odd belt widths require installation 1/2
from the belt edge.
3. Use the Maxi-Splice as a template to mark the hole locations for
punching. After marking the first hole, move over 2 and mark each
consecutive hole.
4. Punch both belt ends for 1/2 diameter bolts.
5. The two end plates and center plate are used for firm belt gripping.
The end plates have two gripping areas the slotted gripping area is
mounted toward the face of the belt and is followed by a series of
gripping teeth. These teeth are always mounted toward the tail of the
belt. The center plate is symmetrical and cannot be improperly
installed.
6. IMPORTANT: We have supplied a 1/2 diameter, 4 long Grade 5 bolt
and nylon locking nut. The bolts must be torqued for Maxi-Splice to
effectively clamp. The torque requirement is 75 foot pounds for belts
up to and including 600 PIW belts greater than 600 PIW tensile require
100 foot pounds of torque.
7. Run the belt for thirty minutes; stop the leg and re-torque the bolts.
End Piece #1
Center Piece
Center Piece
End Piece #2
1/2" Diameter
4" Long
Grade 5 Bolt
And Self-Locking
Nut
PVC
or
Rubber Belt
DALLAS, TEXAS
Hanger Bearings
Elevator Bolts
Mailing:
P.O. Box 700008
Dallas, TX 75370-0008 USA
Shipping:
16400 Midway Road
Dallas, TX 75244 USA