Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Product Overview
FODII (3RU) CATV Fiber Optic Distribution
Platform , including :
Application Feature
•Accelerated deployment of advanced services
•Hot-swappable modules
Mo d ule # 02
Mo d ule # 03
Mo d ule # 04
Mo d ule # 05
Mo d ule # 06
Mo d ule # 07
Mo d ule # 08
Mo d ule # 09
Mo d ule # 10
Ordering Information
FODII - PF
( If you need SNMP interface, except ordering FODII-PF, you need to order FODII-SNMP additionally. )
Application Features
• Hot swappable
Parameter
•AC input voltage 90 to 260 VAC (47 to 63Hz)
Ordering Information
FODII - AC
Application Features
Ordering Information
FODII - SNMP
Optical Parameters
•Laser type Cooled DFB LD with isolator
•Optical wavelength 1310nm ± 20nm
•Laser RIN noise density ≦-155 dB/Hz
•Laser output power 10mW
RF Parameters
•Operating bandwidth 45 to 870MHz ( 45M ~ 1GHz is optional )
•Flatness ±0.75dB
•RF Input impedance 75Ω / unbalanced
•Channel loading 45 to 550MHz for 77 ch NTSC
•RF input level range 15dBmV/ch to 25dBmV/ch for NTSC77 channel loading plan
•RF input return loss ≧16dB
•Test point -20 ± 1dB / reference to the RF input level
Electrical/Environmental/Mechanical
Ordering Information
FODII-1310TX- - - -
Application Features
•50~870MHz bandwidth
• Configurable auto-switching between 2 optical channels
• Microprocessor control & monitoring
• AGC or MGC controlled mode
• Slope –1~+3dB adjustable
• Remote controlled function via SNMP
Optical Parameters
•Photodiode type InGaAs PIN
•Optical wavelength 1260 ~ 1620nm
•Optical power input range +3 to -1 dBm
•Equivalent input noise 8.5 pA / Hz0.5
•Switching time 500ms / CHA or CHB fiber cur occurs
RF Parameters
•CNR ≧ 52dB
•CSO ≦ -64dBc
•CTB ≦ -68dBc
(Note: OMI=3.6%, optical wavelength 1310nm, received optical power 0dBm, output
level=36dBmV/ch, 77 channel loading )
Ordering Information
FODII-FRX-
Connector
SC: SC/APC with shutter
FC: FC/APC
Application Features
•50~870MHz bandwidth
• Configurable independent, auto-switching and manual control
between 2 optical channels
• Microprocessor control & monitoring
• AGC or MGC controlled mode
• Remote controlled function via SNMP
Optical Parameters
•Photodiode type InGaAs PIN
•Optical wavelength 1260 ~ 1620nm
•Optical power input range +3 to -1 dBm
•Equivalent input noise 8.5 pA / Hz0.5
RF Parameters
•Operating bandwidth 5 0 ~ 870MHz
•Flatness ±1dB
•RF output impedance 75Ω / unbalanced
•RF output level range 36dBmV/ch (OMI=3.6%) @0dBm input
•RF output return loss ≧16dB
• Slope 3 ~-1dB
•Analog channel loading 54 to 552 MHz /77 ch NTSC
•Digital channel loading 552 to 870 MHz / Digital signal
•RF connector type F-type Female
•Channel to channel isolation ≧65dB
•Test point -20 ±1dB / ref. to output
Ordering Information
FODII-2FRR-
Connector
SC: SC/APC with shutter
FC: FC/APC
Application Feature
•5 to 200MHz transmission bandwidth
•High RF output eliminates external amplifiers
•Front panel RF test-point for convenient monitoring
•High density 4 receivers in one module.
•Redundant version integrates optical path and RF
switching in the same module
•Universal management through SNMP
Optical Parameters
•Photodiode type InGaAs PIN
•Optical wavelength 1260 ~ 1620nm
•Optical power input range -13 to 1 dBm
•Equivalent input noise 8 pA / Hz0.5
RF Parameters
•Operating bandwidth 5 ~ 200MHz
•Flatness ±0.75dB
•RF output impedance 75Ω / unbalanced
•RF output level range 40dBmV (OMI=7%) / with –9dBm optical input
•RF output return loss ≧16dB
•Gain control range 0 ~ -31.5dB in 0.5dB steps
• Slope ±1.0dB
•Test point -20 ± 0.75 dB/ reference to the RF input level
Ordering Information
FODII- RPR -
Connector
SC: SC/APC with shutter
FC: FC/APC
Parameters
•Wavelength range 1530 ~ 1560nm
•Number of outputs 1
Ordering Information
FODII-EDFA- -
23 : 23dBm