Está en la página 1de 44

SUBNETWORK_ID

SubNetwork Id
INTEGER: 0 to 4095
61
BTS_NAME NE_ID NE_IP SDR_TYPE
BTS Name NE ID NE IP Address SDR Type
80 characters at most
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
O&M IP of Node B,
should be unique in the
whole network
BS8700,BS8800
GU360,BS8800
U240,BS8800
U120,BS8800
U120A,BS8900
GU360,BS8900
U240,BS8800 GU360
E,BS8900 GU360
E,BS8900A,BS8906
BAGHUABOLA 142 118.61.142.100 BS8800 GU360
SDR_VERSION RNC_ID BSC_ID LONGITUDE LATITUDE
SDR Software
Version
RNC ID BSC ID Longitude Latitude
4.09.21.05,4.09.21.05P
01
INTEGER: 0 to 4095.
GSM single-mode base
station does not need
to fill in.
INTEGER: 0 to 65535.
UMTS single-mode
base station does not
need to fill in.
RANGE: -180 to 180.
Accurate to six digits
after the decimal point
RANGE: -90 to 90.
Accurate to six digits
after the decimal point
4.09.21.05P01 27 61 180.0 90.0
LOCATION VENDOR_NAME USER_DEFINED_STATE
Location Vendor Name User Defined State
40 characters at most.
Can be blank.
40 characters at most.
Can be blank.
80 characters at most.
Can be blank.
NE_ID RADIO_MODE CC_SLOT FS_SLOT PM_SLOT
NE ID Radio Mode CC Slot FS Slot PM Slot
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
UMTS,GSM,GSM+UM
TS
Pattern:slot,... Slot
range: 1,2; Configured
as "1,2" if there are two
CC boards. The board
in slot 1 must be
configured.
Pattern:slot,... Slot
range: 3,4; Configured
as "3,4" if there are two
FS boards.
Pattern:slot,... Slot
range: 14,15;
Configured as "14,15" if
there are two PM
boards.
142 GSM+UMTS 1 3 14
BPC_SLOT UBPG_SLOT SE_SLOT TAM_BOARD TAM_SLOT
BPC Slot UBPG Slot SE Slot TAM Board Type TAM Board Slot
Pattern:slot,... Slot
range:4 to 8, UMTS
parameter. For
example:6,7,8
Pattern:slot,... Slot
range:4 to 8, GSM
parameter. For
example:5,6,7
INTEGER: 5 to 8
0:TAM0;1:TAM1. Keep
blank if TAM board is
not configured
INTEGER: 4 to 8
7 5
TAM_WORKING_CURRENT UES_SLOT RACK_TOPOLOGY BATTERY_SAVING EPM_PWR_TYPE
TAM Normal
Working
Current(mA)
UES Board Slot Rack Topology
Energy Saving
Mode
Embedded power
device Type
TAM0:75 to 400;
TAM1:75 to 600
INTEGER: 3 to 8
Pattern:1-RU-RU-...,1-
RU-RU-... For
example, "1-2-3,1-4,1-
51-52" means RSU2
and RSU4 and RRU51
connect with the main
rack, RSU3 connects
with RSU2, RRU52
connects with RRU51.
Each optical port
cascade up to four RU.
Keep blank if there is
no cascade connection.
Y:Function opened,
N:Function closed
ZXDU58 B900,ZXDU
B121,ZXDU45-
75,ZXDU150
1-2,1-3,1-4,1-5,1-6,1-7 N ZXDU45-75
EPM_DEAL_MODE
Embedded power
data processing
mode
0:Transparent
transmission,1:Parse
0
NE_ID NTP_SERVER_IP TIME_ZONE SUMMER_TIME_START SUMMER_TIME_END
NE ID
NTP Server IP
Address
Time Zone
Summer Time
Start
Summer Time End
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
IPV4
Please refer to the help
documentation
Pattern: MM-DD
HH:mm, Fill in '0' if not
used
Pattern: MM-DD
HH:mm, Fill in '0' if not
used
142 139.61.0.254 GMT + 5:30 0 0
NE_ID CLOCK_ID1 CLOCK_ID2 CLOCK_ID3 CLOCK_SYNC_MODE
NE ID
Clock Source
Priority 1
Clock Source
Priority 2
Clock Source
Priority 3
Clock
Synchronization
Mode
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
GPS,BITS-2MHz,BITS-
2Mbps,Line,1588,Sync
E
GPS,BITS-2MHz,BITS-
2Mbps,Line,1588,Sync
E
GPS,BITS-2MHz,BITS-
2Mbps,Line,1588,Sync
E
0:GSM/UMTS
Frequency Sync;
1:GSM FrameNumber
Sync. UMTS
Frequency Sync;
2:GSM Frequency
Sync. UMTS
FrameNumber Sync;
3:GSM/UMTS
FrameNumber Sync
142 Line
GPS_CABLE_TYPE GPS_RECEIVER_TYPE GPS_FEEDER_DELAY
GPS Cable Type GPS Receiver Type
GPS Antenna
Feeder Delay(ns)
0:One Cable Input;
1:Two Cables Input
0:Build-in; 2:Slave
Shelf
INTEGER: 0 to 32767
NE_ID TRANSMISSION_TYPE TRANSMISSION_MEDIUM ETHERNET_WORK_MODE FE_BANDWIDTH
NE ID Transmission Type
IP Transmission
Medium
Ethernet Work
Mode
FE/GE
BandWidth(kbps)
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
IP,ATM,ATM+IP
FE,E1,T1,FE+E1,FE+T
1
Auto,1000M,100M,10M
INTEGER: 100 to
1000000, Step 100
142 IP FE+E1 Auto 100000
FE_LINK_TYPE OMCB_GATEWAY_IP OMCB_QOS OMCB_IP_NO IPCLK_SYNC_SERVER_IP
FE/GE Link Type
OMCB Gateway IP
Address
OMCB Qos OMC-B IP No.
1588 Sync server
IP Address
RNC/BSC/CN,SDR IPV4
BE: Try the best. EF:
EF service, Expedited
Forwarding, Minimum
Delay, Maximum flow.
AF42: Class-4 service
with medium discarding
priority. AF22: Class-2
service with medium
discarding priority.
AF43: Class-4 service
with high discarding
priority. AF23: Class-2
service with high
discarding priority
INTEGER: 0 to 19,
existed in IP sheet.
Must be configured for
IP 1588 clock reference
source(GIPI interface
IP). Valid only when it
is IP over Ethernet
transmission type.
RNC/BSC/CN 118.61.0.1 BE 0
IPCLK_IP_NO IPCLK_QOS
1588 IP No. Ip Clock Qos
INTEGER: 0 to 19,
existed in IP sheet.
BE,EF,AF42,AF22,AF4
3,AF23
NE_ID IP_NO IP_VLAN_ID IP_VLAN_IP_ADDR IP_VLAN_MASK
NE ID IP No. IP Vlan No.
IP VLAN IP
Address
IP VLAN Subnet
Mask
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
INTEGER: 0 to 19
INTEGER: 2 to 4094.
65535:Invalid
IPV4
142 0
142 1 1705
10.85.102.122
255.255.255.252
IP_VLAN_GATEWAY PPP_NO PPP_HDLC_NO PPP_IP_ADDRESS PPP_PROTOCOL
IP VLAN Gateway
IP
PPP No.
PPP HDLC Link
No.
PPPoE IP Address PPP Encapsulation
IPV4
INTEGER: 0 to 7. ML-
PPP: 0 to 2
Pattern: hdlc No.,...
hdlc No.:0 to 15, 8 links
at most
PPPoE ip address.
"0.0.0.0" represents
automatic allocation.
PPP,ML-PPP
0 0 118.61.142.100 ML-PPP
10.85.102.121
PPP_LINK_TYPE PPP_COMPRESSION MP_HEAD MP_PRIORITY
PPP Link Type
Support IP
compress or not
MP Head MP Priority
RNC/BSC/CN,SDR
N:non-support,
Y:support
LONG,SHORT,INVALI
D
1,2,3,4,INVALID
RNC/BSC/CN Y LONG 4
NE_ID SCTP_NO SCTP_RADIO_MODE SCTP_LOCAL_PORT SCTP_REMOTE_PORT
NE ID SCTP No. SCTP Radio Mode SCTP Local Port SCTP Remote Port
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
INTEGER: 0 to 3 GSM,UMTS
UMTS:0 to
65535;GSM:1 to 1536
UMTS:0 to 65535;
GSM: iBSC CMP
Module No. + 0x3900
142 0 GSM 142 14596
142 1 UMTS 528 528
SCTP_REMOTE_IP SCTP_INOUT_STREAM SCTP_QOS SCTP_IP_NO PATH_DOMAIN
SCTP Remote IP
Address
SCTP InOut
Stream
SCTP Qos IP No. Path Domain
IPV4 INTEGER: 1 to 6
BE: Try the best. EF:
EF service, Expedited
Forwarding, Minimum
Delay, Maximum flow.
AF42: Class-4 service
with medium discarding
priority. AF22: Class-2
service with medium
discarding priority.
AF43: Class-4 service
with high discarding
priority. AF23: Class-2
service with high
discarding priority
INTEGER: 0 to 19,
existed in IP sheet.
INTEGER: 0 to 3,
255:Invalid. UMTS
multi-path parameter,
OMCR docking
parameter is: Omcb
Path-Omcb Module
97.241.102.13 6 EF 0 255
10.81.2.145
2 EF 1 255
NE_ID HDLC_NO E1T1_LINK_ID E1T1_LINK_TYPE HDLC_TIMESLOT_MAP
NE ID HDLC No. E1/T1 Link No. E1/T1 Link Type HDLC Timeslot
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
INTEGER: 0 to 15
INTEGER: 0 to 15. 8 to
15 is the E1/T1 link id
of SE which is plugged
in slot 5.
RNC/BSC/CN,SDR
Pattern:start of time
slot-end of time slot,...
Slot 1 to 31(T1 is 24)
can be used. Slot 0 is
excluded.
142 0 0 RNC/BSC/CN 1-31
TSI_IN_TIMESLOT_MAP TSI_OUT_LINK_ID TSI_OUT_TIMESLOT_MAP
TSI In Timeslot TSI Out Link ID TSI Out Timeslot
The pattern is same as
HDLC timeslot. can not
overlap with the HDLC
timeslot. should be
filled in case of time
slot interchange,
otherwise keeping
empty.
INTEGER: 0 to 15.
should be filled in case
of time slot
interchange, otherwise
keeping empty.
The pattern is same as
HDLC timeslot. The
number of out&in
timeslot must be
identical. should be
filled in case of time
slot interchange,
otherwise keeping
empty.
NE_ID RU_NO RRU_NAME RADIO_MODE BOARD_TYPE
NE ID RU No. RU Name Radio Mode Board Type
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
RSU2 to 25, RRU: 51
to 74
60 characters at most,
can be blank. without
<>&'"
UMTS,GSM,GSM+UM
TS
Please refer to the help
documentation
142 2 GSM RSU60E-GU908
142 3 UMTS RSU40-U216
142 4 GSM RSU60E-GU908
142 5 UMTS RSU40-U216
142 6 GSM RSU60E-GU908
142 7 UMTS RSU40-U216
DOWNLINK_FREQ UPLINK_FREQ FS_PORT OPTICAL_MODULE_TYPE RX_EXTENSION_RU
Central Downlink
Frequency(MHz)
Central Uplink
Frequency(MHz)
FS Port
Optical Module
Type
Rx RF Extension
RU No.
Multiple of 0.2MHz. 0 or
blank represents
automatical calculation
by Node B
Multiple of 0.2MHz. 0 or
blank represents
automatical calculation
by Node B. When
downlink frequency is
not 0, uplink frequency
should not be 0.
First FS: 0 to 5, Second
FS: 20 to 25
1.25G,2.5G.
R8880,R8882,R8890,R
SU82 series can set
2.5G. All of RU linked
to same FS port must
be identical.
The frequency band of
associated RU should
be identical. Each RU
can only be associated
once.
0 0 0 1.25G
0 0 1 1.25G
0 0 2 1.25G
0 0 3 1.25G
0 0 4 1.25G
0 0 5 1.25G
RX_PORT_ANTENNA ANTENNA_TYPE TM_TYPE RX_POWER_GAIN TX_POWER_GAIN
Connected to an
Antenna or not
Antenna Type
Tower Top
Amplifier type
Tower Top
Amplifier Uplink
Power Gain
Tower Top
Amplifier
Downlink Power
Gain(0.1db)
N: Does not connect to
an antenna, Y: connect
to an antenna. If setting
Y, Rx RF Extension RU
can not set.
ANT:Normal Antenna,
RET:Aisg
TMA,A-TMA,ETMA,A-
ETMA. This parameter
and the following four
parameters is valid
when the antenna is
RET.
TMA:110 to
130(0.1dB); A-TMA:44
to 100(0.25dB);
ETMA:230 to
250(0.1dB); A-
ETMA:92 to
100(0.25dB);
Invalid:255
INTEGER:70 to 170;
Invalid:255
Y ANT
Y ANT A-TMA 48 255
Y ANT
Y ANT A-TMA 48 255
Y ANT
Y ANT A-TMA 48 255
TMA_NOISE LINE_LOSS FCE_BOARD
Tower Top
Amplifier Noise
Coefficient(0.1dB)
Tower Top
Amplifier Feeder
Cable Loss(0.1dB)
FCE board type
INTEGER: 10 to 30 INTEGER: 0 to 80
FCE,FCEA,FCE4,FCE
5. valid when it is RSU
FCE
20 30
20 30
20 30
NE_ID GRU_NO GW_CONFIG_MODE CARRIER_GROUP CARRIER_NUMBER
NE ID GSM RU No.
GU Carrier Config
Mode
Carrier Group
Total Carrier
Number
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
RSU2 to 25, RRU: 51
to 74The second PA
of R8882RSU82
is:'RU No.#2'
4G+1U,2G+2U,INVALI
DSingle radio mode
is INVALID.
INTEGER: 0 to 32.
0:Do not group
DTR:1 to 6, TTR:1 to 2,
RSU82:1 to 4, R8882:
1 to 6
142 2 Invalid 1 4
142 4 Invalid 2 4
142 6 Invalid 3 4
CARRIER_POWER_PARA STATIC_POWER_LEVEL SECTOR_ID_1 TRX_NUMBER_1 SECTOR_ID_2
Carrier Power(W)
Carrier Static
Power Level(db)
First Sector No.
Carrier Number
dedicated to first
sector
Second Sector No.
INTEGER: 1 to 80
0db,2db,4db,6db,8db,1
0db,12db,14db,16db,18
db,20db. -0.2db,-0.4db,-
0.6db,-0.8db,-1.0db,-
1.2db(only TTR and
RSU02)
The Id should exist in
GSM Sector sheet,
255:invalid
INTEGER: 1 to 6 Same as sector 1
20 0db 1 4
20 0db 2 4
20 0db 3 4
TRX_NUMBER_2 SECTOR_ID_3 TRX_NUMBER_3 SECTOR_ID_4 TRX_NUMBER_4
Carrier Number
dedicated to second
sector
Third Sector No.
Carrier Number
dedicated to third
sector
Fourth Sector No.
Carrier Number
dedicated to fourth
sector
Same as sector 1 Same as sector 1 Same as sector 1 Same as sector 1 Same as sector 1
SECTOR_ID_5 TRX_NUMBER_5 SECTOR_ID_6 TRX_NUMBER_6 SUB_FREQ_BAND
Fifth Sector No.
Carrier Number
dedicated to fifth
sector
Sixth Sector No.
Carrier Number
dedicated to sixth
sector
Branch Frequence
Band
Same as sector 1 Same as sector 1 Same as sector 1 Same as sector 1
INTEGER: 0 to 3. 0 or
255:invalid
255
255
255
NE_ID NODEB_ID CE_UP CE_DOWN DYNAMIC_POWER_TRACK
NE ID NodeB ID CE Up CE Down
RU Dynamic
Power Track
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
INTEGER: 0 to 65535.
Same as NE ID if radio
mode is UMTS.
INTEGER: 1 to 1920,
65535:Invalid
INTEGER: 1 to 1920,
65535:Invalid
Y: Function opened, N:
Function closed
142 1526 65535 65535 N
TELECOM_OPERATOR PASHARE_PER
Telecom Operator
Power-sharing
Ratio
127 bytes at most, can
be blank. without <>&'"
INTEGER: 0 to 50
- 0
NE_ID LCG_ID LCG_INFO BPC_GROUP
NE ID
Baseband resource
pool No.
Baseband resource
pool Information
BPC Board Group
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
INTEGER: 0 to 35
199 bytes at most, can
be blank. without <>&'"
Baseband boards
belongs to this
Baseband resource
pool. Pattern:
BPCSlot&BPCSlot&...
142 0 7
NE_ID UMTS_SECTOR_ID UMTS_SECTOR_INFO RELATED_RU RX_TYPE
NE ID Sector No. Sector Information Related RU Rx Type
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
INTEGER: 0 to 255
199 bytes at most, can
be blank. without <>&'"
RF Units belong to this
sector. Pattern: RU
No.&RU No.&...
Y: Diversity, N: No
Diversity, MIMO, MIMO-
II
142 0 3 Y
142 1 5 Y
142 2 7 Y
RFRX_ORDER
RFRx Line Order
0: Normal, 1: Reverse
0
0
0
NE_ID LOCAL_CELL_ID LOCAL_CELL_INFO UMTS_SECTOR_ID LCG_ID
NE ID Local Cell ID
Local Cell
Information
Sector No.
Baseband resource
pool No.
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
INTEGER: 0 to
268435455.Unique in
the network. The local
cell ID is a pre-
scheduled parameter
that should be
consistent with the
RNC configuration.
199 bytes at most, can
be blank. without <>&'"
INTEGER: 0 to 255 INTEGER: 0 to 35
142 15262 2 1 0
142 15263 3 2 0
142 15261 1 0 0
TRANSMITTING_FREQ CARRIER_INDICATION FREQ_SPACING CELL_RADIUS LOCAL_CELL_POWER
Transmitting
Frequency(MHz)
Carrier No.
Receive Filter
BandWidth
Cell Radius
Local Cell
Power(W)
Multiple of 0.2MHz. 869
to 894, 925 to 960,
1805 to 1880, 1930 to
1990, 2110 to 2170
RTR/DTR:0 to 2,
R8880AR8882R88
90RSU82:0 to 3. If
GU Carrier Config
Mode is 4G+1U, it
should be 0; If GU
Carrier Config Mode is
2G+2U, it should be 0
or 1.
5M,4.8M,4.6M,4.4M,4.2
M
2.5km,5km,10km,20km
,40km,80km,120km
INTEGER: 0 to 200,
255:Invalid
2166.6 2 5M 10km 255
2166.6 2 5M 10km 255
2166.6 2 5M 10km 255
LOCAL_CELL_TYPE DC_LOCAL_CELL TRANSMIT_DELAY RECEIVE_DELAY BATTERY_SAVING
Local Cell Type
Dual Carrier
Secondary Local
Cell
Transmit
Delay(chip)
Receive
Delay(chip)
Energy Saving
Mode
0:Common cell, 1:High
speed railway cell
Primary and secondary
local cell must belong
to the same sector
which the Rx type is not
MIMO or MIMO-II, and
is neighboring
cells(transmission
frequency interval is
between 4.2 and
5MHz)
INTEGER: 0 to 65535 INTEGER: 0 to 65535
Y:Function opened,
N:Function closed
0 23 13 N
0 23 13 N
0 23 13 N
LOCAL_CELL_2MS_GAIN LOCAL_CELL_VAM
2ms Gain VAM function
Enable: Support,
Disable:Non-support
Y:Support, N:Non-
support. can be Y only
if the Rx type of sector
is MIMO or MIMO-II.
Enable N
Enable N
Enable N
NE_ID SECTOR_ID GPS_OFFSET POINT1_RU_NO POINT2_RU_NO
NE ID Sector No.
GPS Synchronous
Frame Header
Offset
High speed railway
cell entry point 1
RU No.
High speed railway
cell entry point 2
RU No.
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
INTEGER: 1 to 24 INTEGER: 0 to 50 Can be blank Can be blank
142 2 0
142 3 0
142 1 0
NE_ID SECTOR_ID TRX_NO CHANNEL_MODECARRIER_NUMBER_OF_LOGIC_FREQ
NE ID Sector No.
Logic Carrier
Frequency No.
Channel Mode
Physical Carrier
Number
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
INTEGER: 1 to 24 INTEGER: 1 to 54
SINGLE:Single
channel, DUAL:Dual-
channel, MULTI:Multi-
channel
INTEGER: 1 to 12
142 3 1 MULTI 1
142 3 2 MULTI 1
142 3 3 MULTI 1
142 3 4 MULTI 1
142 1 1 MULTI 1
142 1 2 MULTI 1
142 1 3 MULTI 1
142 1 4 MULTI 1
142 2 1 MULTI 1
142 2 4 MULTI 1
142 2 2 MULTI 1
142 2 3 MULTI 1
CARRIER_GROUP FREQ_BAND SUB_FREQ_BAND USE_IRC EXTENSION_CARRIER
Carrier Group Frequency Band
Branch Frequence
Band
Use IRC Extension Carrier
INTEGER: 0 to 32.
0:Do not group
2.1G,1900M,1800M,85
0M,900M
INTEGER: 0 to 3. 0 or
255:invalid
0:Disable IRC,1:Enable
IRC,2:Enable STIRC
Y:Yes, N:No
3 900M(Band VIII)255 1 N
3 900M(Band VIII)255 1 N
3 900M(Band VIII)255 1 N
3 900M(Band VIII)255 1 N
1 900M(Band VIII)255 1 N
1 900M(Band VIII)255 1 N
1 900M(Band VIII)255 1 N
1 900M(Band VIII)255 1 N
2 900M(Band VIII)255 1 N
2 900M(Band VIII)255 1 N
2 900M(Band VIII)255 1 N
2 900M(Band VIII)255 1 N
NE_ID DRY_CONTACT_POSITION DRY_CONTACT_NO
NE ID Dry Contact Position Dry Contact No.
INTEGER: 0 to 65535.
should be unique in the
whole subnetwork.
Index of all sheets
SA,SE,FCE,FCE-II,FCE-
III,FCEA,FCEA-II,FCE3,FCE5,FCE5-
II,FCE5-III. If position is RU, the
pattern is RU-No., example:RU-51.
For the FCE series, please refer to
the help documentation.
The SA/SE board supports 8-way
input, the number range is 0 to 7.
FCE3 is 0 to 7, FCE5 is 0 to 6, FCE
and FCEA is 0 to 4, R8880A-U2112
is 0 to 2, other RF board is 0 to 3.
142 SA 2
142 SA 3
142 SA 5
142 SA 4
142 SA 7
142 SA 0
142 SA 1
142 SA 6
DRY_CONTACT_TYPE DRY_CONTACT_CONTENT ALARM_STATUS
Dry Contact Type Dry Contact Alarm Code Dry Contact Alarm Status
Input:Input dry contact, Output:Output
dry contact. Output dry contact
should be linked to contact No.6 or 7
of SA/SE.
198092044:Cabinet door
alarm,198092045:Flooding
alarm,198092046:Smoke
alarm,198092047:Infrared
alarm,198092048:Air-condition
fault,198092049:Surge Protection
Device fault,198092051:PSU
alarm,198092052:PSU fan
alarm,198092068:Base station
master power supply break
alarm,198092206:Battery
alarm,198092207:AC power-cut
alarm,198092208:Rectifier model
alarm,198092209:Thermoelectric
cooling alarm,198092550 to
198092599:User Defined Alarm
Valid only if type is input.
OPEN:Alarm appears if contact is
open, CLOSE:Alarm appears if
contact is closed
Input 198092552 CLOSE
Input 198092553 CLOSE
Input 198092555 CLOSE
Input 198092554 CLOSE
Input 198092557 CLOSE
Input 198092550 CLOSE
Input 198092551 CLOSE
Input 198092556 CLOSE
OUT_CONTACT_TYPE
Output Dry Contact Status
Valid only if type is output. 0:Output
low level, 1:Output high level
0
0
0
0
0
0
0
0

También podría gustarte