Documentos de Académico
Documentos de Profesional
Documentos de Cultura
KING PANTHER
PORTABLE GAS CUTTING MACHINE
Portable KING PANTHER is state-of-the-art-technology cutting machine, available with ANM Nozzle for Oxy-Acetylence cutting and PNM Nozzle for Oxy-LPG cutting.
SALIENT FEATURES
No backfire during cutting because of "NozzleMix" technology. Aluminium die cast body with ventilation holes reduces overheating of motor and other electrical parts. Unbreakable, smooth and precise horizontal and vertical adjustment of torch. Bevel setting with locking facility means bevel accuracy during long cutting. Remote mounted gas control knobs make flame adjustment during cutting operation easy. Single lever ON-OFF control for cutting Oxygen makes the stopping and restarting of cutting very easy and saves Oxygen. Stainless steel heat reflectors (2 nos. with air gap), protect the motor from heat during cutting thus adding to the life of the machine. Travels on standard 1.8 mtr extruded Aluminium rail.
KING
of
TECHNICAL SPECIFICATIONS
UNIT MODEL NUMBER OF TIPS NOZZLE INLET THREAD LENGTH OF TORCH WEIGHT OF TORCH (W / O TIP) TORCH INLET CONNECTION NO MM MM GMS AWL KING JOIN 3 M12 X 1P 425 490 3 / 8 BSP L.H.
BRIEF SPECIFICATIONS:
Cutting Capacity Straight Cut Circle Cutting Bevel Cutting Cutting Speed Power Supply Weight Overall Dimension Horizontal Adjustment of Torch Vertical Adjustment of Torch : : : : : : : : : : 100 mm of mild steel with NMC-100S torch. In 1.8 mtr length or multiples by adding rails. 150 to 1200 mm diameter. Up to 45 degrees. 100 to 1000 mm/min. 220/240 V, 1ph, 50 Hz. 10.8 kg. approx. 420 mm L x 280 mm W x 450 mm H (approx). 80 mm. 60 mm.
Conventional Products
Cutting Capacity: 75 mm. Backfire Prone Injector Mix Torch. Fabricated sheet metal body, difficult to dismantle and assemble for maintenance.
200 TO 2000MM DIA. UPTO 45 DEG. 100 70 350X220X175 9.8 (W/O TRACK) 6.2
4.
Spring-loaded torch holder assembly gives jerks while moving up and down. Gas Control knobs are mounted on the torch itself. Hence they get hot during cutting, making it difficult for the operator to do any adjustment during cutting. No such lever is available. Usually portable gas cutting machines do not include these accessories.
Helpline No.: 1800 233 1071 For Welding & Cutting Equipment, Service & Spares.
WELDERS TO THE NATION SINCE 1951
7.
www.adorwelding.com
Registered & Corporate Office: Ador House, 6, K. Dubash Marg, Fort, Mumbai 400 001. INDIA. Tel: +91 22 6623 9300 / 2284 2525. Fax: +91 22 2287 3083 / 2596 6562. Email: cmo@adorians.com
8.
www.adorwelding.com
SALIENT FEATURES
Stainless steel diaphragm in first stage to absorb shock of inlet pressure up to 200 bar. Flexible rubber diaphragm in second stage for fine gas control. Forged brass bonnet in first stage and die cast special alloy bonnet in second stage for higher strength. Plastic moulded valve and stainless steel spindle in the valve assembly capsule in both stages for leak-proof performance. Distinctive colour for bonnet, pressure gauge and pressure adjusting knobs. Second stage plenum chamber volume is six times than first stage ensuring very stable flow characteristics. Double protection through separate safety valves in first and second stage. Triple filter: one in inlet and two wire mesh in the valve assembly protect the sensitive internal parts from any dust particles. Weight 2.40 Kg.
SALIENT FEATURES:
Torch is designed with safety purpose to give dependable performance. Only 5 tips are able to cater for Gas Welding / Brazing from 0.8 mm to 35 mm thick plates. These are swaged copper tubes. This is a better engineered safety product designed to give dependable protection against backfire. This blowpipe has been designed as all metallic from outside.
SPECIFICATIONS
IS 7653
Maximum cutting thickness: 300 mm Length of torch: 460 mm Weight of torch: 1.2 kg Manufactured as per IS: 7653 1975 and Certified by Bureau of Indian Standards. Marked with ISI and certification license number CM/L 7226061
Gas
TECHNICAL SPECIFICATIONS
UNIT MODEL NUMBER OF TIPS TIP INLET THREAD LENGTH OF TORCH WEIGHT OF TORCH (W / O TIP) TORCH INLET CONNECTIONS NO MM MM GMS AWL KING JOIN - AGWT /3W 5 SIZES (Suitable for LPG) M 8 X 1P 350 350
1/4 BSP R.H. FOR OXYGEN 1/4 BSP L.H. FOR LPG GAS
BRIEF SPECIFICATIONS:
MAX. INLET MAX. OUTLET MAX. FLOW GAUGE RANGE (KG/cm2) PRESSURE PRESSURE LPM INLET OUTLET INLET OUTLET BAR BAR MIN MIN MAX MAX 230 10 1000 0 250 0 16 KING REGULATOR AOXD2 (0-10) 20 200 200 1.5 10 250 25 1000 0 0 0 44 250 250 0 0 0 3 50 lpm 16 REGULATOR TYPE END CONNECTIONS
BRIEF SPECIFICATIONS:
CM/L-7226061
Maximum plate thickness that can be welded Number of tips Tip inlet thread Length of torch Weight of torch (without tip) Blowpipe inlet connections
: : : : : : :
35 mm 5 sizes M 10 X 1 P 290 mm 750 gms 3 /8 BSP R.H. for Oxygen 3/8 BSP L.H. For Acetylene
Oxygen
5/8 BSP RH (MALE) 5/8 BSP LH (MALE) 5/8 BSP RH (MALE) 5/8 BSP RH (MALE)
3/8 BSP RH (MALE) 3/8 BSP LH (MALE) 3/8 BSP RH (MALE) 3/8 BSP RH (MALE)
Conventional Products
Injector Mix technology used. In this kind of torch, large quantity of oxygen and fuel gas is mixed in the torch pipes itself. These allow backfire to travel inside the torch where explosive oxygen and fuel gas mixture often explodes damaging the torch and injuring the operator Brass tubes are used which get damaged very often. Handle grip, pressure adjustment knobs are plastic moulded which result in easy breaks. Frequent backfire disrupts piercing opertation or cutting of rusted/painted plates especially with acetylene gas. Only Nut-Nipples are given as an accessory and these are packed loosely in corrugated box.
Acetylene KING REGULATOR ADAD2 (0-1.5) KING REGULATOR AARD2 Nitrogen KING REGULATOR ANTD2 Argon
TIP SPECIFICATIONS
TIP NO. 1 2 3 4 5 PLATE THICKNESS MM 0.5 TO 1MM 1 TO 1.5MM 1.5 TO 2 MM 2 TO 2.5 MM 2.5 TO 3 MM GAS PRESSURE (KG / SQ.CM) OXYGEN GAS 1.5 1.5 2 2.5 2.5 GAS PRESSURE (KG / SQ.CM) FUEL GAS 0.3 0.3 0.3 0.3 0.4
6. 5. 2. 3. 4. Seamless stainless steel pipes ensure long life even in shop floor abuse conditions. All metal, rugged design. Weight only 1.2 kg. No backfire even when piercing a thick plate or cutting a rusty/painted plate with acetylene gas. Vital accessories are enclosed with the torch in special cavities to avoid transit damages: I) One set of Nut-Nipple set- 3/8 B.S.P.R.H. and one set of 3/8 B.S.P.L.H. ii) Nozzle cleaner - one set iii) Spanner for nozzle fixing nut and nut-nipples. Torch is packed in rugged, moulded EPS (Thermocole) box and Duplex printed box. -
SALIENT FEATURES
Packed in plain corrugated boxes.
For any service related or Welding & Cutting Equipment, Service & Spares.
KING PROTECT
Helpline No.:
KING PROTECT / T: Flashback arrestor is designed to be fitted on the inlet of hand held gas welding and cutting equipment and to machine torches. It consists of a non-return valve and a cylindrical stainless steel filter element. The device provides protection to the operator and ancillary equipment, should a flashback occur.
KING PROTECT / T
Unbreakable moulded pressure adjusting knob. Unique profile rubber diaphragm. Stainless steel machined & ground valve spindle with hard plastic moulded valve at the heart of the regulator. Sintered filter in the inlet, wire mesh filter in valve assembly. Side inlet for horizontal cylinder valve, bottom inlet for vertical cylinder valve. Self-adjusting safety valve. Weight 1.10 Kg approx.
S41.04.022.0130
1 SET
KING PROTECT / R: Flashback arrestor is desinged to be fitted to KING PROTECT / R the requlator outlet on single cylinder applications or as an integral part of a pipeline mounting and in both applications it provides complete protection to the operators regulator and gas supply from the effects of flashback.
BRIEF SPECIFICATIONS:
Gas Regulator Type Max. Inlet Pressure (Bar) Oxygen
KING REGULATOR
Inlet
Outlet
Connections Connections 5/8 BSP RH (MALE) 5/8 BSP LH (MALE) 3/8 BSP RH (MALE) 3/8 BSP LH (MALE)
200 20
Note: Gauge Range is same as Goldline series regulators for same ratings. *Manufactured as per IS: 6901 - 1988
KING Series
of Welding Accessories
GP Gloves
ADOR WELDING CABLES 100 METERS SUPPLIED IN DRUM & HOSE SUPPLIED 50 METERS IN BOX
Registered & Corporate Office: Ador House, 6, K. Dubash Marg, Fort, Mumbai 400 001. INDIA. Tel: +91 22 6623 9300 / 2284 2525. Fax: +91 22 2287 3083 / 2596 6562 / 2596 6062. Email: cmo@adorians.com