Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Can be combined with position feedback or control head Flange acc. ISO 5211 and DIN 3337 Long life cycle Optical position indicator Pilot valve connection NAMUR
Type 2050 can be combined with
The pneumatic rotary actuator, Type 2050, consists of a single or double-acting pneumatic linear piston actuator with internal quick-acting screw thread coupling to a turn element and a universal mechanical interface to DIN 3337 and ISO 5211. During the linear movement of the piston under the pressure of the control air or the force of the return spring, the actuator shaft is turned through 90 by the quick-acting screw thread coupling. This rotary movement can be used to operate corresponding armatures such as ball valves, ap valves, etc. The actuator has an optical display for the piston position. The materials employed permit use under heavy-duty, slightly aggressive environmental conditions. In order to ensure the full functionality of the rotary actuator, a minimum control pressure of 2 bar (control function I) or 3.5/4.0 bar (control function A, see Technical data) is required. The drive operates maintenance-free.
Technical data Actuator material, ange Pilot air ports material Seal material Internal parts material Actuator shaft material Ambient temperature Actuator size Control medium Pilot pressure Double-acting actuator Single-acting actuator Flange Rotation Rotation time for 90 Torques Installation PA6 GF30 Stainless steel 1.4305 NBR POM and PBT Stainless steel 1.4308 -10 to +60C 63 mm, 100 mm Neutral gases, air 2 to 10 bar ( 63 mm), 2 to 6 bar ( 100 mm) 4.0 to 10 bar ( 63 mm), 3.5 to 6 bar ( 100 mm) F04, F05 and F07 according DIN 3337 and ISO 5211 (universal) 90 3 1 to 3.5 s (depending on load and pilot pressure) please refer to charts on p. 3 As required, preferably with actuator in upright position
www.burkert.com
p. 1/4
2050
63
Stainless steel
4.0 - 10
Materials
Internal parts:
2050
Dimensions [mm]
G 1/4
A B C
Actuator 63 100
Flange F 04 F 05 F 05 F 07
A 30 35 35 55
B 42 50 50 70
2 E F
C 67 67 90 90
D M5 M6 M6 M8
E 9 10 10 12
F 16 16 21 21
G 51 51 72 72
H 75 75 102 102
K 69 69 73 73
L 80 80 127 127
SW 11 14 14 17
Control function A Actuator size 100 mm Opening with 4, 5 or 6 bar pilot pressure against the spring force
resulting torque [Nm] 45 40 35 30 25 20 15 10 5 0 6 bar 5 bar 4 bar
torque [Nm]
60 50 40 30
100 mm
p. 3/4
2050
Type
Service Orice QNn Pressure port A [mm] value air range (banjo bolt) [l/min] [bar]
G 1/4 G 1/4 1.2 2 48 120 0-10 0-10
Electrical coil Power Item no. Voltage/ connection consumption frequency [V/Hz] Ind. Std. [W] 024/DC 230/50
Form B Form A 4 8 552 283 424 103 552 286 424 107
For further accessories see separate datasheet for Type 1062 or the accessories datasheet Type 2XXX for the full options programme.
Note: For design reasons, some of the accessories cannot be supplied for actuator size 40 mm. Please request the accessories datasheet Type 2XXX.
63 100
0810/2_EU-en_00895007
p. 4/4