Documentos de Académico
Documentos de Profesional
Documentos de Cultura
In offices, schools and public buildings throughout the world, in museums, sports halls and hospitals in every country, Philips general lighting solutions are at work. Helping to create safe, comfortable, productive and energy efficient. Environments for all kinds of people. This chapter shows the range of Philips general indoor lighting solutions, and how they enable lighting designers to combine form and function in a multitude of ways.
Lighting
General Lighting
TK
Surface mounted industrial luminaire TK Range for Fluorescent Lamps Classifications IP 20 Class I Complies with iEC 598 Application - Factories - Other Commercial Applications Description : - Quality of TK range fulfills the technical requirement and electrical safety. - The gear housing and reflector made of sheet steel white painted after phospating to protect corrosion. - No special tools required to open the reflector from the gear housing. - Can be mounted not only directly to ceiling surface but also mounted by means of suspension tube.
B A
TK TK TK TK
1 2 1 2
W W W W
C 60 100 60 100
82
General Lighting
TMS 011 An indoor luminaire in single fluorescent-lamp versions for general lighting. The range is available with TL D 18W and 36W for surfacemounted application. Basic batten luminaires designed for use with TLD fluorescent lamp(s) for general lighting. The luminaires can be suspended or direct ceiling mounted. Classifications IP20 Class I Complies with IEC598 and F Main applications - Discount stores, hyper-supermarkets. - DIY stores. - Convenient stores. - Coves. - Home lighting. - Normal industries.
Features High quality with safety. Easy installation and maintenance. Philips ballast is pre-wired inside the luminaire and the starter is provided. Materials and finish Housing is in U-shaped white pre-painted sheet steel. End cap in ABS. Installation and mounting Mounting: electrical connection through cable entry centrally or via end-cap. Method: holes for screw fixing or suspension by chains/threaded rods. Options Fused terminal block. HF electronic ballast. Emergency lighting.
TMS 011
Dimensions in mm
Type
Lamp
1 x 18W 1 x 36W
83
General Lighting
TMS 012
TMS 012 High-quality basic industrial batten luminaires in single and twin-lamp versions design for use with TLD fluorescent lamp(s) for general lighting. The luminaires can be suspended or direct ceiling mounted. The specially designed lampholders are slid on to the end of ceiling rail. Twin lampholders are fitted with an integrated starter-holder. The longitudinal sides of the ceiling-rail are reinforced by molding. Mounting bosses around the keyhole slots and under the ballast(s) allow for an extra safe distance from the batten and the ballast(s) to the mounting surface. A range of attractive attachments is available for use with the TMS 012. Classifications IP 20 Class I Complies with IEC 598 and F Main applications - Normal industries - Discount stores, Hyper/supermarkets, Do-it-yourself shops - Coves
Features Sturdy Good finish and aesthetics Material and finish Housing: 0.4 mm white powder painted sheet steel. Rail cover: 0.4 mm white powder painted sheet steel. Reflector: 0.6 mm white powder. Painted sheet steel. Diffuser: PMMA prismatic/ABS end-cap. Installation and mounting Mounting: electrical connection through cable entry centrally or via end-cap. Method: holes for screw fixing or suspension by chains/threaded rods. Accessories GMP: PMMA prismatic diffuser. GKD/GKH: industrial reflector for single/twin lamp(s). GDL, asymmetric reflector for single lamp. Options Fused terminal block. HF electronic ballast. Emergency lighting.
84
General Lighting
TMS 012
Type Basic Batten TMS 012 1x18 W TMS 012 2x18 W TMS 012 1x36W TMS 012 2x36W TMS 012 1x58W TMS 012 2x58W Prismatic Diffuser GMP 1x18 W GMP 2x18 W GMP 1x36 W GMP 2x36W GMP 1x58W GMP 2x58W
C 185 185 40 40 40 40
L 614 614 1224 1224 1524 1524 614 614 1224 1224 1524 1524
Type
Lamp
Net Wt. (kg) 6.6 6.6 6.6 6.6 8.9 8.9 12.7 12.7 15.0 15.0 20.5 20.5
Packing dimensions (mm) 185x625x100 185x625x100 185x625x100 185x625x100 185x1235x100 185x1235x100 185x1235x100 185x1235x100 185x1535x100 185x1535x100 185x1535x100 185x1535x100
Batten 230V/50Hz TMS 012/118 I 1xTLD 18W TMS 012/118 IC 1xTLD 18W TMS 012/218 I 2xTLD 18W TMS 012/218 IC 2xTLD 18W TMS 012/136 I 1xTLD 36W TMS 012/136 IC 1xTLD 36W TMS 012/236 I 2xTLD 36W TMS 012/236 IC 2xTLD 36W TMS 012/158 I 1xTLD 58W TMS 012/158 IC 1xTLD 58W TMS 012/258 I 2xTLD 58W TMS 012/258 IC 2xTLD 58W Accessories Prismatic Diffusers GMP 012/118 0.7 GMP 012/218 0.8 GMP 012/136 0.9 GMP 012/236 1.0 GMP 012/158 1.0 GMP 012/258 1.1 Industrial Reflectors GKH 012/118 4.6 GKH 012/136 9.0 GKH 012/158 11.2 GKD 012/218 3.8 GKD 012/236 7.7 GKD 012/258 8.4 Asymmetric Reflectors GDL 012/118 4.4 GDL 012/136 8.9 GDL 012/158 11.1
I = inductive, IC = parallel compensated
80x650x78 165x650x65 80x1258x78 165x1258x65 80x1520x78 165x1520x65 145x625x45 145x1235x45 145x1535x45 190x635x85 190x1245x85 190x1545x85 100x640x85 100x1250x85 100x1550x85
1 1 1 1 1 1 6 6 6 6 6 6 6 6 6
220V/50Hz,240V/50Hz, 220V/60Hz versions available upon request. Electronics ballast (HF-P, HF-R, EB, EB-P), and low loss ballast versions available upon request. Fuse terminal block version available upon request. Emergency battery version (separated unit) also available upon request.
TMS 012/2XTLD 36W TMS 012/2XTLD 36W
85
General Lighting
TBS 265
TBS 265 The TBS 265 is an open type recessed-mounted luminaire with a high quality white painted reflector for TLD fluorecent lamps. Application The luminaire is specially designed for universal indoor lighting applications such as: Moderate offices, shops and banking halls. Description The lamp housing is made of sheet steel electrostatic painted resulting high reflectance doe to quality finish of reflecting surface. Screwless end plates are made of UV and Flame retandent ABS. The housing is light weight without spot-welding so guaranteed no corrosion at the joining parts. The electrical components are securely mounted in the gear housing and well laid wiring uses heat resistant cable.
TBS 265
Dimension in mm
86
General Lighting
TBS 088 Economical recessed mounted luminaire with TL D fluorescent lamps for indoor general lighting applications. It offers an economical lighting solution for exposed T-bar ceiling. Classifications Class I IP20 Compliance with IEC 598 and F Main applications - Office open plan - Shops - Department stores Features - Extremely flat housing design - Ease of installation by means of specially designed flip-flat plate
Materials and finish Housing white zinc-coated sheet steel. Optics: pre-anodized and glossfinished sheet aluminium Installation and mounting Mounting: individual for 300 mm or 600 mm ceiling grids, visible T-bar profiles. Method: housing rests on T bars. There are four suspension holes available for safety chain. Options 2-, 3- or 4-lamp versions with TL D, 18W, or 36W. Applicable optics: Prismatic cover (P6) Gloss Aluminium (G2) Matt-surface aluminium (E2) Apllicable gears: conventional electro-magnetic with parallel capacitor compensation.
Dimension in mm
Type TBS 088/318 TBS 088/418 TBS 088/236 TBS 088/336 A 597 597 1197 1197 B 597 597 297 597
87
General Lighting
TBS 300
TBS 300 Functional modular luminaires for TL D fluorescent lamp(s) with a choice of 3 optics, 2 covers and an optional 1-, 2- or 3-hour emergency lighting circuit. All versions, excluding O and P, are suitable for air handling systems. Extra-length versions available upon request. Classifications Class I IP20 Compliance with IEC 598 and
Can be mounted by threaded rods. Flexible modular system for attachments. Modular range. 1 product family. Built-in emergency units are possible. Materials and finish Housing: white zinc-coated sheet steel. Optics: preanodized sheet aluminium. Installation and mounting Mounting: individual. For standard 300 mm or 600 mm, modular exposed or concealed ceiling grids. Accessories Suspension bracket set. Options 1-, 2-, 3- and 4-lamp TL D versions with TL D 18W, 36W. Applicable optics and covers: M1, M2, M5, O and P6. Applicable gears: conventional electromagnetic with parallel capacitor compensation and high frequency electronic ballast. Applicable mains options (V/Hz): 220/50. Integrated air-supply panels. Fused terminal block. Lighting controls. Emergency lighting. Suspension brackets. Extra length.
Main applications - Normal industries - Representative offices - Conference rooms - Small offices - General open plan offices - Dataprocessing offices - Reception and public service areas - Recreational areas (restaurants, cafeterias) - Discount stores, Hyper-/supermarkets, D-I-Y shops - Department stores, fashion shops - Small independent food/nonfood shops - Specific areas
B 597 597 1197 1197 C 297 597 297 597 D 89 89 96 96
Features Wide range of attachments and mirrors. Suitable for exposed and concealed ceiling.
88
General Lighting
TBS 300
Type
Voltage
Lamp
TBS 300LH 218 HF-P+M2 TBS 300LH 218 HF-P+M5 TBS 300LH 218 IC+M2 TBS 300LH 218 IC+M5 TBS 300LH 218 ICLL+M5 TBS 300LH 236 HF-P+M2 TBS 300LH 236 HF-P+M5 TBS 300LH 236 IC+M2 TBS 300LH 236 IC+M5 TBS 300LH 236 ICLL+M2 TBS 300LH 236 ICLL+M5 TBS 300LH 318 HF-P+M2 TBS 300LH 318 HF-P+M5 TBS 300LH 318 HF-P+P6 TBS 300LH 318 IC+M2 TBS 300LH 318 IC+M5 TBS 300LH 336 HF-P+M5 TBS 300LH 336 IC+M5 TBS 300LH 418 HF-P+M5 TBS 300LH 418 HF-R+M5 TBS 300LH 418 IC+M5
220240V/50, 60Hz 220240V/50, 60Hz 220V/50Hz 220V/50Hz 220V/50Hz 220240V/50, 60Hz 220240V/50, 60Hz 220V/50Hz 220V/50Hz 220V/50Hz 220V/50Hz 220240V/50, 60Hz 220240V/50, 60Hz 220240V/50, 60Hz 220V/50Hz 220V/50Hz 220240V/50, 60Hz 220V/50Hz 220240V/50, 60Hz 220240V/50, 60Hz 220V/50Hz
2 x TLD 18 W 2 x TLD 18 W 2 x TLD 18 W 2 x TLD 18 W 2 x TLD 18 W 2 x TLD 36 W 2 x TLD 36 W 2 x TLD 36 W 2 x TLD 36 W 2 x TLD 36 W 2 x TLD 36 W 3 x TLD 18 W 3 x TLD 18 W 3 x TLD 18 W 3 x TLD 18 W 3 x TLD 18 W 3 x TLD 36 W 3 x TLD 36 W 4 x TLD 18 W 4 x TLD 18 W 4 x TLD 18 W
Net Wt. (kg) 2.20 2.40 2.75 2.85 2.90 3.70 3.90 5.20 5.30 5.20 5.30 4.00 4.30 4.60 4.95 5.25 6.90 9.20 4.40 4.40 5.35
Packing dimensions (mm) 66x310x96 661X310X96 661X310X96 661X310X96 661X410X96 1266X310X96 1266X310X96 1266X310X96 1266X310X96 1266X310X96 1266X310X96 661X622X96 661X622X96 661X622X96 661X622X96 661X622X96 1266X622X96 1266X622X96 661X622X96 661X622X96 661X622X96
89
General Lighting
TBS 369
TBS 369 X-tend is a revolutionising luminaire using the cutting edge technology to design and produce the 3-dimensional OLC (Omni-directional Luminance Control) lamella. Compact luminaire height in 75 mm. The luminaire combine with a lot of features. The concave shape to provide excellent light-technical performance on high efficiency and good uniformity. The OLC lamella with excellent glare control given interior designer greatest freedom for design. The aesthetic outlook which integrate with multi-function can provide delta, high output or asymmetric light distribution to fit almost all applications. Classifications IP 20 Class I Compliance with IEC 598 and F Main applications - Representative offices - Conference rooms - Reception and public service areas - General offices - Recreational areas (restaurants, cafeterias) - Corridors and staircases - Department stores, Fashion shops - Display - School - Terminals
Features Suitable for all metric ceilings 3 types of louvre D6 & C6 complies with CIBSE LG3 Cat 2 and OLC. 3 dimensional lamella. Concave Contour. Materials and finish Housing material: zinc-coated white paint sheet steel. Optics: High purity pre-anodize aluminum sheet in matt, semispecular and specula finished. In-fill Panel: post painted aluminum sheet. Resistance to fire. Ambient temperature: Ta = 25C. LOR 70%. Installation and mounting Resting on T-Bar. Suspension via hooks or chains. Hanging via swing-out bracket. Accessories Swing out bracket. Options Fuse terminal block. Emergency power pack.
Dimensions in mm
Optics option (all with parabolic reflectors) : Materials Geometry of Lamellae GBS 369 C6 GBS 369 D6 GBS 369 M6 specular aluminum 3 dimensional;top closed semi-specular aluminium 3 dimensional;top closed matt-finished aluminium 3 dimensional;top closed
90
General Lighting
TCS 097
Type TCS 097 1-2x18W TCS 097 1-2x36W TCS 097 1-2x58W
Tender description Low-cost surface mounted luminaire for 1 or 2 TL D fluorescent lamp(s) with choice of opal- or prismatic cover. Covers shall be supplied with the luminaire. Housed in a white steel base plate with plastic endcaps for perfect finishing. The cover shall be fixed with metalic lockers and guarantee a protection against dust of IP 40, which must be clearly visible once the luminaire is installed. The luminaire shall be available with conventional gear or optionally with HF electronic.It shall be intended for individual mounting. The luminaire shall comply with ENEC/CE.
Dimensions in mm
Luminaire programme
Type TCS097 1xTL-D18W TCS097 1xTL-D36W TCS097 1xTL-D58W TCS097 2xTL-D18W TCS097 2xTL-D36W TCS097 2xTL-D58W TCS097 1xTL-D18W TCS097 1xTL-D36W TCS097 1xTL-D58W TCS097 2xTL-D18W TCS097 2xTL-D36W TCS097 2xTL-D58W Options:HFB,HFP IO IC O IC O IO IC O IC O IP IC P IC P IP IC P IC P
91
General Lighting
TCS 098 Low-cost luminaire for TL D fluorescent lamp(s) with choice of 5 optics (L,C1,C3,ML,AS). Dedicated Class II versions are also available. Optics supplied with the luminaire. Applications - Lobby office spaces - Recreational areas - Public buildings, schools, and hospitals - Discount stores, hyper-/ supermarkets, Do-it-yourself shops - Department stores, fashion shops - Normal industries
Technical description Gear/power supply: HF (optional): 220 V - 240 V Conventional: 230 V or 240 V Lamps: 1 and 2 TL D fluorescent Housing: white pre-lacquered steel with PC/ABS end-caps
The Philips Environmental product design rules, are used to develop the Centura TCS 098.
92
General Lighting
Dimensions in mm
Type TCS 098 2x18 W TCS 098 1-2x36 W TCS 098 1-2x58 W A 450 900 1200 B 641 1241 1541
93
General Lighting
FCS series Surface-mounted and semi recesed downlight of low installed depth for compact flourecent lamp with opal diffuser. Application - Coridor - Stair cases - Recreational area Technical Description Power supply: 220 V Gear: integral gear Lamp position: Horizontal Material: polycabonate Installation Cut out A: 275 x 275 B: 345 x 345
A
IP 42
C B
Basic Programme
FCS 901 FCS 902 FCS 921 FCS 922 Voltage 220V/50HZ 220V/50HZ 220V/50HZ 220V/50HZ Lamp TLE 22W TLE 32W PLS 11 W x 2 PLL 18W x 2 Watt 38 41 38 52 Dimensions 300 x 300 x 75 370 x 370 x 85 300 x 300 x 75 370 x 370 x 85 Kg 1.3 1.6 1.8 2.1
94
General Lighting
FGP 280 Security lighting with pL-s lamps Classification Classification: - IP 65 - Class I - Complies with iEC 598 Application Security lighting in residential and industrial area. Features - The luminaire is designed for an ambient temperature of 35C - Vandal proof - High impact clean prismatic - POLYCARBONATE (opal white) - Weather proof - Die Cast aluminium housing - High impact clear prismatic cover - Integral luminaire Product Family or Range Prismatic Cover : FGP 280 111 PR FGP 280 211 PR OPAL Cover : FGP 280 111 FGP 280 211 Lamp data
Type FGP280 111 PR/OP FGP280 211 PR/OP Lampholder G 23 G 23 Lamp PL - S 11W PL - S 11W Gear Basic Basic Voltage 220 V 50 Hz 220 V 50 Hz
OP OP
Product Related Issues Application - Security lighting in residential and industrial area Installation Wall or ceilling mounting option
95