Documentos de Académico
Documentos de Profesional
Documentos de Cultura
com
info@logica-hs.com
-1 -
The pa rcula r company organi zaonal s tructure, whi ch consists of an engineeri ng depa rtment and a producon depa rtment served by selected pa rtners and where everything is run wi th an ISO9001 cered quality s ys tem, gua rantees a great exibility, reliability and, consequentl y, real advantages for the customers :
Technical assistance, both during ins tallaon and use of the ins truments , supplied by our helpful techni cal oce Possibility to cus tomi ze products according to cus tomers speci ca ons and needs Quali ty gua ranteed by severe inspecons on 100% of our products Low cos ts, obtained wi th an a ccura te opmizaon of company resources and products. Great a enon to the quality of the whole servi ce, from the rs t contact wi th the customer to a ersale assista nce
All these fea tures ha ve made LogicaH&S, a well-established and worl dwide apprecia ted company in the eld of dryi ng control and moisture measurement.
-2 -
www.logica-hs.com
info@logica-hs.com
Contents
HANDHELD MOISTURE METERS Measuring mber moisture LG6NG - Contact mber m oisture mete r MoisTest I - Digital contact me ter LG43 - Pin type moisture me ter/thermohygrometer 4 5 5 6
DRYING PROCESS CONTROLLERS Comparis on ta ble LG31 MC panel mounng mber moisture mete r LG38 panel mounng semi automac kiln controller EASY - Semi automac mber kiln controller HELIOS - Automac mber kiln controller M900 - Advanced mber kiln controlle r DELPHI - LCD based automac kiln controller DELPHI - VAC2 (Vacuum kilns controlle r) dTOUCH - a step ahead in wood drying 7 8 8 9 10 11 12 13 14
OTHER PRODUCTS Wireless Sensors System by LogicaH&S LG34 - Wireless receiver unit LG36 - MoistureMouse wire less transmie r unit. LG36 Box EMC/RHT - Wireless Transm ier Unit. LG40 - Mulpurpose digita l mete r LG20-VAP - Steaming cells controller LG35 - Measurement system LG30 - Kiln Bus data logging system LG46 - Mul I/O module LG47 - Moisture monitor. USB485 - USB to RS485/RS422 optoinsulated converte r HT - Phytosanitary treatment. 16 16 17 18 19 19 20 21 21 21 22 24
SOFTWARE WoodWizard2 - Data acquision and remote control soware dVIEW soware SmartHT - Easy soware for HT (Heat T reatment) 23 23 24
26
It is very important to know mber moisture during all phases of wood working, from the purchasing of sawed wood unl its nal painng. Although the weighing method (rao between weight before and aer drying process) is the only worldwide recognized reference method for the exact measurement of moisture, many good instruments (but even more easy-to-use, faster and less intrusive) are today available on the market for most of applicaons. The most important thing is, rst of all, to choose the right instrument, according to the specic needs, since dierent needs can only be sased with dierent instruments. Buying an instrument without having analysed the pros and the cons may oen lead to the wrong purchase and to users disappointment. Many meters are available today on the market and can be divided into two main groups: contact meters (which measure the dielectric characteriscs of wood) and pin type meters (which measure the resistance between two electrodes). Contact meters or pin type meters? Contact meters can make readings in depth, due to the generated electric eld. The reading depth depends on the characteriscs of the instrument, on the density of the material to be measured and its moisture content. The obtained value is an average of measured moisture value, which is calculated with decreasing sensivity at the increase of depth. Pin type meters are used to measure the electric resistance between two electrodes. The reading is made only on the space between the two electrodes at the depth where they have been inserted. The measured value corresponds to the maximum moisture between Contact meter the electrodes, both on surface and in depth. If the highest moisture is in the middle, you can easily esmate the moisture distribuon into the board simply by nocing the reading changes on the instrument while scking the electrodes. Otherwise, the only other way to get this informaon is by using insulated electrodes, with unshielded ends, to avoid the inuence of surface layers on readings. From this dierence between the two meters, it becomes clear that the only condion in which we can compare the measurements obtained with the two instruments is with seasoned or dried wood, in which moisture is uniformly distributed into the wood.
Pin type meter
the moisture on tested material is lower than 8-10% its essenal not to cause any damage on tested material the wood surface is wet with dew a great number of readings must be taken in short me
the moisture on tested material is higher than 20-30% the material is less than 2 cm thick and you cant put one layer on other without air gaps the moisture could be not uniformly distributed into the wood the tesng speed and damage on material are less important than required accuracy
Precision The instruments produced by LogicaH&S have been calibrated on internal reference samples, which are based on measurements taken on many mber species, whose moisture have been determined according to the regulaon UNI 9091-2/87 (weighing method). Other mbers have been classied in analogy with tested samples. As wood is not a homogeneous material, the instruments performance cannot be automacally guaranteed on samples which are dierent from tested ones, even if of the same wood species. For this reason, on customers request, LogicaH&S can supply all instruments with the Cercate of Inspecon which is made directly on customers wood, released by C A T A S S . p . A . ( A u t h o r i ze d t e s t i n g l a b o r a t o r y ).
-4 -
www.logica-hs.com
info@logica-hs.com
Technical characteristics
CODE: C000032
Suggested testing range: 5-35 % Number of ranges: 7 Reading depth*: 2-3 cm Power supply: 9V 6F22 battery Battery life: 60h ca Size: 148x59x25 mm Weight: 200 gr * Minimum thickness suggested for testing material; it changes in inverse proportion to material density and moisture content.
CODE: C000032
Alkaline
battery,
Additional functions: Automatic switch off (when measure key is released), Low battery indicator.
Technical characteristics
CODE: C000017
Suggested testing range: 5-40% Ranges number (wood): 7 Ranges number (building materials): 5 User-programmable ranges: 7 Temperature indicator: -10/50C Reading depth*: 1-2 cm Power supply: 9V 6F22 Battery life: 70h ca Case size: 32,5x26x8 cm Case weight: 800 gr
* Minimum thickness suggested for testing material; it changes in inverse proportion to material density and moisture content.
Additional functions: Temperature indicator, reading compensation with microprocessor, selectable alarms, alphanumerical display, automatic switch off, low battery indicator Equipment: Leather case, plastic case, reference sample, alkaline battery, users manual.
-5 -
C001542
CODE: C001549 CODE: C001550 CODE: C001551 CODE: C001553 CODE: C001909
TECHNICAL SPECIFICATIONS
Suggested measuring range (wood): 8-50% Timber groups: 4 Building materials group s: 5 Leather groups: 2 Internal temperature indication: -10/50C Power supply battery: 9V6F22 Battery life: 35h approx. Case dimensions: 32,5x26x8cm Weight (/T-/M-/TM): 1,3 - 3,03,5 Kg. approx
Temperature range: -10/+80C -10/+80C Temperature accuracy: 0.5 (0-40C) 1.2 (-20+80C) Humidity range: 0-100% RH Humidity accuracy: 2% (10-90%) 4% (0-100%)
Main Functions: Temperature indicator, microprocessor based measurement compensation, temperature compensation with internal external or settable temperature, high/low moisture alarms, air temperature / RH / EMC measurement (optional sensor), auto -power off, battery low indicator.
Equpment: Case, plastic handle*, h am me r* , e le c t ro de s , assembling key, alkaline battery, users manual. * Depends o n the version
C001553 - RH/T
C001550 - LG43 TM
-6 -
dTOUCH
Convenonal or Con densaon Vacuum EMC 1+ 6+ 1+ 24Vac/dc 24Vac 11 Relays, 3 Analogic PID or On - O 8 Digital RS232/485 Kiln Bus 24 Columns - oponal Automac 5 Phases (drying phase dened by 8 steps) 5 Phases WoodWizard1 WoodWizard2 Eprom 80 20 LED Oponal WoodWizard2 Eprom LED Automac Semi Automac Temperature and EMC set points RS232 Kiln Bus Automac Flexible Phases On demand WoodWizard2 Serial interface 18 Graphic LCD RS232/485 On - O On - O PID or On - O 6 Relays 1 Analogic 5 Relays 8 Relays, 250Vac 250Vac 250Vac 250Vac 1 Relays On - O LCD 230Vac 230Vac 24Vac/dc 230Vac 1/2 1 1/2 1 4 4 4+ 4 4 1 230Vac 250Vac 5 Relays On - O RS485 (oponal) Semi Automac Wet and Dry bulb set points LCD 1 1/2 1 1/2 1 EMC EMC RH Wet/Dry Bulb Convenonal or Con densaon Convenonal or Condensaon Convenonal or Condensaon or Vacuum Convenonal or Con densaon
DELPHI
M900
HELIOS
EASY
DELPHI -VAC2
LG31-MC
LG38
Kiln Type
4+
1+
24Vac/dc 250Vac
24Vac/dc
250Vac
Outputs
8 Relays,
8 Relays,
1 Analogic
1 Analogic
PID or On - O
PID or On - O
Inputs
oponal
www.logica-hs.com
Interfaces
RS485
RS232/485
Kiln Bus
Printer
Control mode
Automac
Set-Up mode
Flexible Phases
Flexible Phases
info@logica-hs.com
HT Treatment
Oponal
Oponal
Remote Control
dVIEW
WoodWizard2
Soware Upgrades
Serial interface
Visualizaon mode
Available version
>400 + EXPERT assi92 92 stant 20 + external memo18 + external memories 7 + external memories ries Graphic colour LCD c/w Graphic LCD LED touch screen Panel mounng or Panel mounng or DeskDesktop Panel mounng top
Panel mounng
Panel mounng
Panel mounng
miniSD
iBuon
Dimensions: 144(H) x72(L) x152(D) mm Mounting hole: 134x66mm (depth: 145mm) Power supply: 230Vca 20% - 50/60Hz
TECHNICAL SPECIFICATIONS:
STANDARD EQUIPMENT
4 timber probes inputs 2 temperature probe input (Dry and Wet Bulb) 5 relay outputs (Heater, Dampers, Sprayers, Fans Clock Wise and Counter Clock Wise) Operative temperature range: -10 / +40 C Power supply: 230Vca 20% - 50/60Hz Dimensions: 144(H)x72(L)x152(D) mm Mounting hole: 134x66mm (depth:145mm )
4 silicone insulated cables for timber moisture measurement (10m length) 2 temperature probes (4m length) Assortment of 30 electrodes in three different lengths (15, 25 and 40mm) Users manual
-8 -
www.logica-hs.com
info@logica-hs.com
Technical specifications
Temperature measurement: 0-99C (resolution 1C) Equilibrium moistu re (EMC) measurement: 6-30% @25C (res. 1%) Timber moisture measurement: 8-90% @25C (res. 1%)
Inputs
Sprayers (manual or automatic control Heating (manual or automatic control) Alarm Probe box
Equipment EASY control ler is supplied with the following parts: Probes box with roof to be placed into the kiln, provided with clamp for cellulose, temperature probe, 10m long high insulation cable (Teflon) 3 sets of 10 electrodes (L=15/20/25 mm) to be placed on wood 50 cellulose plates 4 high insulation cables (Teflon) for connection with electrodes
Instruc tions manual with quick reference chart Accessories for assembly
-9 -
Technical specifications
Temperature measurement: 0-99C (resolution 1C) Equilibrium moistu re measurement (EMC): 6-30% @25C (res. 1%) Timber moisture measurement: 8-90% @25C (res. 1%)
Drying gradient proportional to timber moistu re Anti-freeze function for kiln protection Automatic warning in case of electrical problems on probes Alarm signalling by a dedicated relay and code on display. Automatic Switch ON/OFF loads in case of alarm Flaps control can be run according to temperature 80 pre-programmed drying profiles 19 user programmable profiles
Inputs
4 timber probes 1 temperature probe (second probe optional ) 1 equilibrium moisture probe (second probe optional)
Flaps (manual or automatic control) Sprayers (manual or automatic control) Heating (manual or automatic control) Reversal of fans rotation Alarm
Equipment HELIOS controlle r is supplied with the following parts: Probes boxes with roof to be placed into the kiln, provided with clamp for cellulose, temperature probe, 10m long high insulation cables (Teflon) 3 sets of 10 electrodes (L=15/20/25 mm) to be placed on wood 50 cellulose plates 4 high insulation cables (Teflon) for connection with electrodes instruct ions manual with quick reference table accessories for assembly
Additional outputs
Options
Double equilibrium moisture and temperature probe RS232 - RS485 Converter for network connection Control software for P.C. (WindowsXP/Vista/7)
- 10 -
www.logica-hs.com
info@logica-hs.com
Technical specifications
Temperature measureme nt: 0-159,9C (r esolution 0,1C) Equilibri um moisture (EMC) me asurement: 2- 30,0% @ 25C (res. 0,1%) Timber moisture me asurement: 4-90,0% @25C (res. 0,1%)
iButton Connector for program setup, key boar d lock or so ftware update
Display
Inputs/Outputs Inputs for timber moisture pr obes: 6- 32 Inputs for e quilibri um moisture probes: 28 Inputs for temper ature probes: 28 Auxiliary di gital inputs: 7 Fan control On/Off, 2 spe eds or pro portional ( 0-10V) Control for rev ersal of fans rotatio n Heating control On/Off or pr oportio nal ( 0-10V or impulse) Flaps control On/Off or pr oportio nal ( 0-10V or impulse) Sprayers control Output for alarm m ode signal Auxiliary o utputs ( 2 rela ys) kilnBus Inter face for sensors co nnection RS485 I nterface for connection to a network of kilns
3 4-di gits display with high-bri ghtness L ED 39 status LEDs Simultaneous a nd perma nent display of temperature, equilibri um moisture a nd avera ge timber moisture v alue Signal o f mai n alarm conditio ns with dedicated L EDs a nd flashing codes on display
Print of date, current phase and measureme nt val ues, by pressing the pri nt key Automatic print o f date a nd tested val ues at sche duled time intervals Print of all alarm conditions Automatic print o f all pro gram parameters after every cha nge
And, moreover: EasyWiring or desktop box (both metal ma de for t he maxim um noise rejection), cables with insulatio n in Te flon into the kiln, new pro be amplifiers with new measureme nt circuit, pre-arra ngeme nt for network connection with WoodWizar d2 s upervision software.
- 11 -
- 12 -
www.logica-hs.com
info@logica-hs.com
Set-up/keyboard lock/software upgrade through iButton Serial interface: RS232 / RS485 Modules connection interface KILN-BUS Power module (LG29) Relay outputs for sprayers, heating (opening + closing), flaps (opening + closing), fans, alarm (24Vmax 4 A sum of all output currents) Analog output for fans speed driving (0-5 or 0-10V)
Power supply: 24Vac/dc - 1A Modules connection interface KILN-BUS Measuring module (LG25) 6 timber moisture probes (6-90% @ 25C, 0,1% resolution) 2 Equilibrium Moisture Content probes (4-30% @ 25C, 0,1% resolution) 2 temperature probes (0-120C, 0,1 resolution) Auto adaptive AC measuring voltage ( VAV) Digital filter for mains noise rejection ( MNR) Aluminium IP65 case
Modules connection interface KILN-BUS Standard equipment DELPHI control ler (single case including LG 28 and LG29 module for desktop version, double cases for panel mounting version) External amplifier LG25 2 probes boxes for inside kiln installation (every one including: 1 temp. probe, 1 EMC clamp, 3 plugs for timber moisture, 10m of Teflon insulated cable) 6 timber probe cables 14 electrodes for timber moisture x 3 different lengths (15, 25, 40 mm) 100 Cellulose plates for EMC detection Connectors and accessories for installation 3 program iButton + 2 keyboard lock iButton
User manual Options Desktop or panel mounting version PC software for remote controlling/management
Vacuum pump Vavuum release valve Fans (with rotating direction control and 0-10V output for speed regulation) Sprayers Heater (opening and closing output, with proportional drive capability by pulse or by 0-10V output) Alarm signalling /tank management
4 x timber moisture sensors 1 x RH / EMC sensor 1 x Heating fluid temperature 1 x Timber core temperature 1 x Absolute pressure
- 13 -
- 14 -
www.logica-hs.com
info@logica-hs.com
this informaon to modify the current cycle then it will save it for the next drying. PROBLEMS SOLVING An new funcon will be provided to inform the system about doubts regarding the drying in progress (such as long me, appearing defects etc.) through a guided procedure (wizard) ; at the end of the procedure the system will automacally take the most suitable remedy to the problem occurred. dTOUCH The friendly expert A big eort has been accomplished to provide dTOUCH with the best user-friendly interface. The system is based on a touch sensive, colour LCD screen. Whenever possible, every funcon is idened by a icon, while the menu are available in several landTouch remotely controlled via Smartphone. guages. All the selectable funcons are idened by buons or blue colour. With dTOUCH a single touch on the screen is enough to switch from the most complete automac management to the simplest semi-automac mode, without need for any programming skill. dTOUCH The exible soluon Being based on Kiln Bus protocol, dTOUCH is compable with all the most recent sensors and interfaces developed by Logica H&S. The number of probes and their typology can be congured as required to sasfy whatever control need, including interfacing to non convenonal sensor or sensors for special uses like ISPM15 compliant heat treatment. Following three conguraons are provided as example:
C001666 Controller mod. dTOUCH - LG25 (2T,2EMC,6MC) The conguraon includes: dTOUCH control panel, relay output unit LG29, LG25 amplier c/w 10m cable, 2 x probes box (to be installed inside the kiln, each one including 1 temperature probe, 1 EMC clamp, 3 x mc plugs and 10m of Teon insulated cable), 6 mc cables (10m), 14 electrodes x 3 lengths. Conguraon based on LG25 amplier; the probes boxes (installed inside the kiln) must be connected to LG25 which must be installed outside the kiln. This conguraon is especially suitable for drying cycles at temperatures up to 120C. C001667 Controller mod. dTOUCH LG35 (2T,2EMC,8MC) The conguraon includes: dTOUCH control panel, LG29 relay output unit LG29, 2 x LG35 ampliers (to be installed inside the kiln, each one including 1 temperature probe, 1 EMC clamp, 4 x mc plugs), 30m of kiln bus cable, 8 mc cables (10m), 18 electrodes x 3 lengths. Conguraon based on LG35 ampliers, which are built directly into the probes boxes, which should be installed inside the kiln; especially suitable for drying cycles at temperatures up to 80C. C001668 Controller mod. dTOUCH LG36 (2T,2EMC,4+4MC) The conguraon includes: dTOUCH control panel, LG29 relay output unit LG29, LG36 wireless sensors receiver, 2 x wireless EMC box (to be installed inside the kiln, each one with one EMC and one temperature probe), 4 x MC sensor (surface + core), set electrodes x 3 lengths. Conguraon based on a wireless sensors network, especially suitable for drying cycles up to 100C, where it is preferable to avoid connecon cables for MC probes. The number of probes can be increased simply purchasing addional transmiers; every MC transmier has two moisture sensors (surface + core) plus one temperature sensor. All the above examples use LG29 as relays output unit, to drive proporonally aps, heang valve and sprayers (by pulses) and to manage the fans inversion and speed (through a 0-10 analog output). Several dierent conguraons are available either to add further outputs or to connect addional sensors.
- 15 -
WIRELESS SENSOR SYSTEM consists of the following parts: LG34 Wireless Receiver Unit wave, 433MHz antenna Stainless steel mounng bracket for antenna Antenna Coaxial cable (RG58 MIL-C17)
Stainless steel template for electrodes posioning LG36 MoistureMouse (mber moisture sensor) Stainless steel, self-drilling electrodes kit for mber moisture measurement LG36 Box EMC/RH/T - environment climate sensor
Technical specifications
WIREL ESS SENSORS SYSTEM by LogicaH&S is compatible with the following kiln-bus controls system:
Interface: RS485 Protocol: ModBus / KilnBus selectable Max sensors: up to 40 (255 with polling buffer FIFO) Mechanical features Aluminum case 171x121x55mm Connecting via screw connectors. Max wire section: 2,5 mm2
dTouch* control system (Automatic/Semi-automatic graphic, colour, touch screen LCD) Delphi** control system (Automatic - graphic LCD) M900** control system (Automatic - LED)
- 16 -
www.logica-hs.com
info@logica-hs.com
MoistureMouse transmiers can detect and transmit MoistureMouse transmiers are supplied with the folsimultaneously the following data: lowing accessories: Inner moisture of the wood MoistureMouse transmier c/w baery Supercial moisture of the wood Self-drilling, stainless steel electrodes kit - 3 dierent lengths Internal or wood temperature Two colours nylon cord with orescent idenca Baery status on plate to locate the instrument among the stacks
Technical specifications
Built-in sensors: 2 for Moisture wood (Inner and superficial) 1 for wood/internal temperature 1 for Battery status Power supply: 1 for Lithium interchangeable battery 3,6VAA s ize extended temperature Battery life: Up to 5 years in continuous use Transmission frequency: 433.92MHz (FSK) Transmission distance: Approximately 50m in free space Transmission period: Approx. 30 Transmission indicator: red led Setting: Device address 132 Receiver address (kiln dryer) 18 Temperature range: -20 85C
- 17 -
The Wireless Box EMC measures and transmit the following data: Equilibrium moisture content (EMC) Relave Humidity (RH%)(*1) Air temperature Baery status
Technical specifications Built-in sensors: 1 for equilibri um moisture content (EMC) temperature) (*2)
Power supply: 2 for Lithium interchangeable battery 3,6VAA s ize extended temperature Battery life: Up to 5 years in continuous use Transmission frequency: 433.92MHz (FSK) Transmission distance: Approximately 50m in free space Transmission period: Approx. 15 Transmission indicator: Internal red led Setting: Device address 132 Receiver address (kiln dryer) 18 Temperature range: -20 85C
Note: (*1): only for LG36 Box RHT version (*2): only for LG36 Box EMC version
- 18 -
www.logica-hs.com
info@logica-hs.com
Temperature range:-20/+80C Temp. accuracy: 0.5 (0-40C) 1.2(-20+80C) Humidity range: 0 - 100% RH RH Accuracy: 2% (10-90%) 4% (0-100%)
RH/T sensor
Temperature Probe
Box with protection door (IP55) Working temperature: -10/+50C Temperature adjustment range: from 0 to 99C Input for external alarm Relay outputs for Alarm, Steam inlet valve, Steam generator
- 19 -
Range
Accuracy <10 1
Resolution
0,10%
EMC measurement
4-30% @25C
0,10%
0-80C
0,1C
0-80C
0,1C
0-100%
20-80% 3 80-100% 5
0,10%
Replaceable RH Sensor
150-1150 mB
25 mB
1 mB
- 20 -
www.logica-hs.com
info@logica-hs.com
- 21 -
RTS line Selectable output: RS485 or RS422 Equipment: Number of connectable devices: 32 cable for connecon to PC Transmission speed (auto mode): 300-115.200 B/s connector for network connecon (with screw clamps), Transmission speed (RTS mode): 0-512.000 B/s instrucons sheet. Connecon distance: >1Km @ 9600B/s Power supply: 230Vac 50/60Hz RS232 port electrically insulated from RS485/ RS422 Automac transmission or transmission driven by
Equipment
Output standard: RS485 or RS422 Number of connectable devices: 32 Transmission speed (auto mode): 300-115.200 B/s Transmission speed (RTS mode): 0-512.000 B/s Connection distance: >1Km @ 9600B/s Insulation voltage: >1KV Selectable line termination resistance Automatic transmiss ion
Cable for connection to PC Connector for network connection (with screw clamps) Drivers on CD Instruc tions sheet
- 22 -
www.logica-hs.com
info@logica-hs.com
dVIEW soware
dVIEW is the new Logica H&S soware for remote control and management, specic for dTOUCH series controllers. Running on PC equipped with Windows7, Vista or XP O.S., it allows to manage all the kilns of the plant from a single locaon (up to 32 kilns for the standard conguraon). A disnguish feature of dVIEW is to propose to the operator exactly the same user's interface which is available on the control panel; this makes able to work on the PC soware whoever is able to work on the local panel and vice versa: the learning curve is reduced and the producvity is increased. From the PC soware the operator can perform all the operaons available from the local panel; moreover the PC soware is able to record the drying data during the process, represenng them in table or graph format. The soware is also able to produce reports to cerfy the HT treatment performed on packaging materials, according to the internaonal rule ISPM15. Using dVIEW makes it easy to obtain the complete control of the plant through Internet, simply installing on the same PC one of the several ulies available for remote management of the desktop.
- 23 -
HT - Phytosanitary treatment.
The wooden packaging materials are considered responsible for the infestaon due to forestal parasites occurred in the United States, Canada, China and European Union, causing the promulgaon of several control and prevenon measures. To reduce the diusion of the parasites through the wooden packaging materials and to standardize the measures taken in the dierent Countries, some direcves has been dened by FAO during the IPPC convenon. Among the several treatments allowed for mber sterilizaon, there is also an high temperature treatment cycle. LogicaH&S soluons for heat treatment cycles. Logica H&S oers dierent soluons to perform HT cycles. We space from simple products, able to measure several temperature points and save the results in table and graphic form, without any acve control of the kiln, to fully automac systems able to control the kiln in order to perform very opmized HT cycles, with or without mber drying capabilies. Some of these systems accomplish also to the Italian regulaons for HT process, which require, in addion to the classical measures, also the automac vericaon of the measuring probes, through a reference thermometer (LG40), and a number of special protecons for the process and the recorded data.
- 24 -
www.logica-hs.com
info@logica-hs.com
SmartHT b asic (not desned to Italian market) The SmartHT system, which can read up to six wood temperature probes and 2 air temperature probes, consists of: SmartHT soware USB485 converter LG30 Data logging system Wood/Air temperature probes By installing the SmartHT soware on a PC and connecng it to the LG30 data logger through the USB485 interface, a very simple and ecient system to measure and cerfy the HT cycles can be obtained. At the end of treatment, a report containing the stock and plant ID data and the graphic representaon of the temperature trend inside the mber can be produced, according to the current regulaons The two air temperature probes (Dry / Wet Bulb) can be used to measure the air temperature and humidity (required by some local regulaons). SmartHT basic can be used on one kiln only; to connect several kilns to the same PC, the version based on WoodWizard2 soware is required. WoodWizard2 + LG30 In addion to the SmartHT features, the same soluon based on WoodWizard2 soware oers the capability to connect several kilns to the same PC. The soware is compable both with the HT system and with most of the Kiln controllers from Logica H&S. Moreover WoodWizard2 accomplish to Italian HT regulaon requirements.
- 25 -
Spare hammer head In case of damage on the plasc secon of the hammer C000282, a spare part is available to replace only the damaged part. The head is necessarily made of high insulaon plasc material: for this reason, this part is more fragile than other parts of the hammer. A longme use can be guaranteed simply by avoiding to ghten electrodes-blocking nuts with too much force and by making driving holes when measuring very hard or very thick materials . Connecon cable for hammer / Feeler pin Connecon cable, made with high insulaon cables and connectors, which can be used to connect the feeler pin or hammer with the instrument LG43 and to guarantee opmal measures.
Code:C 000102
Code:C000584
Electrodes for pin type moisture meter Stainless steel electrodes with a very sharp pin and insulaon varnishing, suitable for moisture measurement in depth with LG43 instrument . They are available in three dierent lengths and can be used with electrodes hammer and feeler pin.
Length 60 mm - CODE: C001452 Length 40 mm - CODE: C001451 Length 25 mm - CODE: C001450
Electrodes for surface measurement Stainless steel electrodes with a special conducve foam rubber, suitable for readings on thin materials (veneers, paper, leather) or for surface readings. The absence of ps, allows to make non-intrusive measurement on materials. They are very suitable for the use on a feeler pin but can also be installed on an electrode hammer.
Code: C001432
Timber moisture cables The cables for mber moisture measurement must be in perfect condions. Damaged or deteriorated cables cannot be repaired (a normal insulator cannot guarantee a sucent insulaon) and must be immediately replaced. We can supply silicon or Teon insulated cables, shielded or unshielded, with single or double banana plugs terminaon; length from 5 to 30m (mulple of 5m)
- 26 -
www.logica-hs.com
info@logica-hs.com
Probe box To assure the best performances of the control system, probes boxes and cables inside the kiln must always be in perfect state: dust or damage may aect electrical insulaon and may cause erroneous measures. As spare parts, we can also supply boxes provided with temperature probe (NTC) and cellulose clamp, with 3 or 6 connectors for probe cables or with direct output of 2 or 4 probe cables. Panels are provided with high insulaon cable (Teon) for the connecon to the amplier (available length: from 5 to 30m - mulple of 5m).
Banana plugs Connectors made of nickel-plated brass, 4 mm diameter, with rubber insulaon, suitable for high temperature into the kiln. They can be supplied as spare parts for mber probe cables.
Code C000143
Banana plugs AISI304 Heavy duty, AISI304 Stainless Steel plugs, 4 mm diameter, with rubber insulaon, suitable for in-kiln high temperatures. They can be supplied as spare parts for mber probe cables. Electrodes for moisture measurement AISI304 Series of AISI304 stainless steel electrodes with d=4 mm hole for banana plugs, suitable for mber moisture measuring. These electrode can be easily placed/removed using a standard screwdriver thanks to their threaded p.
15 mm - CODE: C001484 25 mm - CODE: C001485 40 mm - CODE: C001486
Code C001486
Cellulose plates Cellulose plates for the equilibrium moisture measurement inside the chamber. They correspond exactly to the calibraons required by Logica H&S controllers. WARNING: the characteriscs of cellulose are dierent for every producer; it is strongly recommended to use original spare parts only. Package 50 pieces - CODE: C000498
Package 100 pieces - CODE: C000499
High performance cellulose plates Cellulose plates for the equilibrium moisture measurement inside the chamber. They correspond exactly to the calibraons required by Logica controllers. Compared to the tradional version, these plates oer an improved sensivity to low EMC values and an higher reliability, thanks to the printed contact strips. WARNING: the characteriscs of cellulose are compable with Delphi and dTOUCH control systems only; for the less recent Delphi (version < 5.1) a rmware upgrade is recommended. Package Test Box for moisture meters calibraon. Connected instead of the electrodes, these test boxes can be used to verify the proper calibraon of the pin type mber moisture meters.
C001578 Test Box for resistance moisture meters (11,5% 25C Group 3) C000910 Test Box for resistance moisture meters (18,5% 25C Group 3) C000911 Test Box for resistance moisture meters (32,5% 25C Group 3)
- 27 -
SPF Probe It is an accessory for resistance meters, useful to esmate the moisture content of sawdust or wood shavings. Connected instead of the electrode holders, it must be inserted deeply into the material to be measured, which has to be properly compacted.
C001909 SPF probe - leng. 60cm - 12mm
Addional spare parts Of course we can supply spare parts for all the instruments produced by Logica H&S, from the single screw to the most upgraded electronic board. About boards, we also oer to our customers a technical assistance service which is able to repair (and not only to replace!) electronic boards, assuring very compeve servicing costs (oen assistance is free!). In case of emergency, we can supply, in accordance with customers, a replacement card (new or refurbished) while the customer sends us back the damaged one, to assure a very short dead me in all over the world.
Note
- 28 -