Está en la página 1de 4

NIRMAL PRADEEP JELDI, Asst.

Professor, CSE Department

DATA COMMUNICATIONS AND COMPUTER NETWORKS FAQS


Unit 1 1) Explain various functions of each layer in OSI model with suitable examples. 2) Discuss how an analog signal is converted into a digital signal with suitable sketches. 3) How binary information is converted into an analog signal using BFSK modulation scheme? Give an example. 4) What are the different techniques available in analog modulation? Explain briefly each modulation scheme with suitable sketches and expressions. 5) Discuss about polar, bipolar and multilevel schemes used in digital-to-digital conversion briefly. 6) Compare various categories of Network topologies. 7) What are the key elements of a protocol? List out various standard organization that develop protocol standards. [15] 8) Explain various components of data communication system. 9) Compare LAN, MAN and WAN. [15] 10) Discuss the function of various layers of OSI Model and compare with TCP/ IP Model. [15] 11) Distinguish between various Levels of addressing used in the Internet Give suitable examples. 12) Explain the following terms a) Throughput b) Latency c) Bandwidth delay Product d) Jitter. [15]

Unit -2 1) Discuss about frequency division multiplexing and time division multiplexing techniques with suitable examples. 2) With suitable examples, narrate circuit switching, datagram, and virtual circuit network.
1|P a ge

NIRMAL PRADEEP JELDI, Asst. Professor, CSE Department

3) Explain the importance of statistical time division multiplexing with an example. 4) Describe the DS-CDMA and FHSS techniques used in spread spectrum communication systems. 5) What is dual up modem technology? List some of the common modem standards and discuss about them briefly. 6) Compare ADSL, VDSL, HDSL and SDSL Technologies. 7) Explain the operation of cable TV Networks. [15] 8) Explain and compare the characteristics of Guided and unguided Transmission media. [15] 9) Distinguish between synchronous and Asynchronous Time division Multiplexing. 10) Compare circuit switching and Packet switching techniques. 11) Describe Major components of a Telephone Network. And explain the Services provided by Telephone Network.

Unit-3 1) Give the frame formats of HDLC and point -to - point protocols, and explain each field in the frame formats in detail. 2) Discuss about the features of physical layer in Fast Ethernet. 3) Discuss about gigabit Ethernet in detail. 4) Explain different categories of frames in wireless LAN defined by IEEE 802.11. 5) Prove that the slotted ALOHA is more efficient than pure ALOHA. 6) . Describe LRC, VRC, Checks and CRC methods of Error detection. 7) Explain function and frame formats of MAC and physical layers of IEEE 802.11. 8) What are the functions of data link layer? Explain stop & wait Protocol. 9) Describe Architecture and layers of Blue tooth. [15] 10) Explain physical layer implementation of fast Ethernet and standard Ethernet. 11) Explain and compare the performance of Random access protocols. 12) Give the characteristics of TDMA, FDMA and CDMA. [15]

Unit-4 1) Discuss about different categories of satellites. 2) What is frame relay network? Describe the two layers of frame relay network in detail.
2|P a ge

NIRMAL PRADEEP JELDI, Asst. Professor, CSE Department

3) Describe the forward and reverse transmissions of IS-95 standard. 4) What are the different connecting devices used in LANs? Explain the functions of various Inter connecting devices. 5) Explain Architecture, Layers and frame format of SONET. 6) Compare 1st and 2nd and 3rd generation of Cellular Telephony. [15] 7) Explain the operation of Linear, Mesh and Ring SONET Networks. [15] 8) Describe Architecture and Layers of ATM Networks. [15]

Unit-5 1) Which protocol maps a physical address to a logical address? Explain its operation with suitable diagrams. 2) List out forward techniques of network layer and describe each of them in detail. 3) Explain the protocols: IPv4 and IPv6 with suitable diagrams. 4) Explain the following protocols used in mapping physical to logical addresses: RARP, ARP, BOOTP and DHCP. 5) Discuss IGMP messages and its formats. 6) What is multicast routing? Explain. [15] 7) Discuss various types of ICMP messages. 8) Explain Distance Vector and link state routing Protocols. [15] 9) Give the frame format of IPV4. Explain the function of each field. 10) What is logical addressing? Discuss IPV 4 addressing.

Unit-6 1) Discuss about the implementation of leaky bucket and weighted fair queuing algorithms. 2) How many phases are required in connection oriented transmission protocol? Discuss them in detail. 3) Discuss the protocols UDP and TCP used in transport layer? 4) What are the Services and application of TCP? Compare TCP and UDP Protocol. 5) What is Congestion? Explain the causes and effects of congestion. [15] 6) What is Quality of Service? Explain. 7) Give the features of various types of data traffic. 8) Explain TWO Congestion control mechanisms. [15]
3|P a ge

NIRMAL PRADEEP JELDI, Asst. Professor, CSE Department

9) Compare Integrated & Differential Services. [15] 10) Explain RSVP Protocol used in Integrated services. [15]

Unit-7 1) 2) 3) 4) 5) Explain different types of DNS messages. Describe the addressing system used by simple mail transfer protocol (SMTP). Discuss the components of the e-mail system in detail. What is TELNET? How are options negotiated in TELNET? Why do you need a domain name system (DNS) when we can directly use an IP address? Give reasoning. 6) What are the three domains of the domain name space? Explain them. 7) Explain File Transfer Protocol. [15] 8) Explain the services of a user agent of electronic mail. [15]

Unit-8 1) 2) 3) 4) 5) 6) 7) 8) 9) HTTP Voice over IP. Network management system. simple network management protocol Streaming stored audio/video. architecture of WWW Audio and video compression. Streaming Live Audio / Video. RTP.

ALL

THE BEST

4|P a ge

También podría gustarte