Está en la página 1de 2

Q&A

CISCOWORKS DEVICE FAULT MANAGER 2.0

Q. What is the CiscoWorks Device Fault Manager (DFM)?


A. CiscoWorks DFM provides real-time, detailed fault analysis, designed specifically for Cisco® devices. This focus on Cisco devices allows
CiscoWorks DFM to monitor Cisco technology-based networks for a variety of fault conditions, analyze these conditions, and only notify the
user through intelligent traps, detailing the problem that has occurred.

Q. How is CiscoWorks DFM packaged?


A. CiscoWorks DFM is available as part of the CiscoWorks LAN Management Solution (LMS).

Q. I am currently using an enterprise management system for fault management. Do I need CiscoWorks DFM? If so, why?
A. CiscoWorks DFM can be used as a Cisco fault subsystem, generating intelligent traps to other event-management systems installed in the
®
network. Cisco Systems has worked closely with a number of enterprise management systems, helping enable these intelligent Cisco traps to
be displayed properly in their respective event systems.

Q. What type of event rules do I need to write to support the Cisco routers and switches in my network? What happens if I add more ports on
one or more of my switches—do I have to rewrite my rules?
A. CiscoWorks DFM is designed to be automatically operational, with support for more than 120 of the most common Cisco routers, switches,
access servers, and hubs already built in. For each of these supported devices, CiscoWorks DFM will automatically look for a range of common
problems at the device and VLAN level without ever requiring users to write rules or set polling or threshold values. As the network grows and
changes, CiscoWorks DFM will detect changes in Cisco devices and adjust its analysis accordingly.

Q. How does CiscoWorks DFM perform its fault analysis?


A. CiscoWorks DFM actively monitors a wide range of symptoms that Cisco has identified can occur in an operational network. Depending on
the type of device, CiscoWorks DFM will actively monitor different conditions through Internet Control Message Protocol (ICMP) polling, Simple
Network Management Protocol (SNMP) MIB interrogation, and SNMP trap reception, and track only those conditions known to cause higher-level
problems in that particular device. If CiscoWorks DFM receives information from the device that does not relate to a higher-level problem,
CiscoWorks DFM will not issue an alert, minimizing the need for IT managers to look at every event happening on the network. This provides
the opportunity for IT managers to proactively manage Cisco device faults.

Q. Can I extend CiscoWorks DFM to monitor the SNMP variables of third-party devices, such as my NT or UNIX system-based application
servers?
A. CiscoWorks DFM is designed specifically for monitoring faults from Cisco devices. If you need a solution to monitor a multidevice,
multivendor environment, you can use CiscoWorks DFM as a Cisco fault subsystem generating intelligent Cisco traps to other enterprise
management systems.

Q. How is CiscoWorks DFM integrated with the CiscoWorks Family of products?


A. As part of the CiscoWorks LAN Management Solution, DFM is designed to work with the entire CiscoWorks Family. It integrates with
the CiscoWorks Family in the following ways:

• Provides new CiscoWorks DFM folder on CiscoWorks desktop


• Uses CiscoWorks security roles

All contents are Copyright © 1992–2005 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 1 of 2
• Uses CiscoWorks server process and backup management services
• Automatically imports Cisco devices from CiscoWorks Resource Manager Essentials (RME), for both local and remote installations of
DFM and RME

Q. I understand CiscoWorks DFM comes ready to use with thresholds and polling intervals already established for a wide range of Cisco
devices. Can I tune these settings to meet the unique needs of my network?
A. Yes, CiscoWorks DFM users with administration rights have the ability to tune all of the thresholds and polling intervals.

FOR MORE INFORMATION


For more information about the CiscoWorks Device Fault Manager and CiscoWorks LAN Management Solution, visit http://www.cisco.com/go/lms
or contact your local Cisco account representative or send an e-mail to the Product Marketing group at ciscoworks@cisco.com.

Corporate Headquarters European Headquarters Americas Headquarters Asia Pacific Headquarters


Cisco Systems, Inc. Cisco Systems International Cisco Systems, Inc. Cisco Systems, Inc.
170 West Tasman Drive BV 170 West Tasman Drive 168 Robinson Road
San Jose, CA 95134-1706 Haarlerbergpark San Jose, CA 95134-1706 #28-01 Capital Tower
USA Haarlerbergweg 13-19 USA Singapore 068912
www.cisco.com 1101 CH Amsterdam www.cisco.com www.cisco.com
Tel: 408 526-4000 The Netherlands Tel: 408 526-7660 Tel: +65 6317 7777
800 553-NETS (6387) www-europe.cisco.com Fax: 408 527-0883 Fax: +65 6317 7799
Fax: 408 526-4100 Tel: 31 0 20 357 1000
Fax: 31 0 20 357 1100

Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on
the Cisco Website at www.cisco.com/go/offices.

Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile • China PRC • Colombia • Costa Rica • Croatia • Cyprus
Czech Republic • Denmark • Dubai, UAE • Finland • France • Germany • Greece • Hong Kong SAR • Hungary • India • Indonesia • Ireland
Israel • Italy • Japan • Korea • Luxembourg • Malaysia • Mexico • The Netherlands • New Zealand • Norway • Peru • Philippines • Poland
Portugal • Puerto Rico • Romania • Russia • Saudi Arabia • Scotland • Singapore • Slovakia • Slovenia • South Africa • Spain • Sweden
Switzerland • Taiwan • Thailand • Turkey • Ukraine • United Kingdom • United States • Venezuela • Vietnam • Zimbabwe

Copyright  2005 Cisco Systems, Inc. All rights reserved. CCIP, CCSP, the Cisco Powered Network mark, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are
trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX,
Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco Systems
Capital, the Cisco Systems logo, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherSwitch, Fast Step, GigaStack, Internet Quotient, IOS, IP/TV, iQ
Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, MICA, the Networkers logo, Networking Academy, Network Registrar, Packet,
PIX, Post-Routing, Pre-Routing, RateMUX, Registrar, ScriptShare, SlideCast, SMARTnet, StrataView Plus, Stratm, SwitchProbe, TeleRouter, The Fastest Way to Increase
Your Internet Quotient, TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

© 2005
All other trademarks mentioned in this document or Website Cisco
are the Systems,
property Inc. All rights
of their respective owners.reserved.
The use of the word partner does not imply a partnership relationship
Important
between Cisco and any notices,
other company. privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
(0501R) 204192.bo_ETMG_LF_1.05
Page 2 of 2
Printed in the USA

XXXXXX.xx_ETMG_XX_12.04

También podría gustarte