Está en la página 1de 184

UNIVERSIDAD VERACRUZANA

FACULTAD DE INGENIERA CIVIL


REGIN XALAPA

PROYECTO ESTRUCTURAL DE UN SISTEMA PARA SOPORTAR


UNA GRUA VIAJERA.

TESIS

QUE PARA OBTENER EL TTULO DE

INGENIERO CIVIL

PRESENTA

Israel Arturo Maldonado Jimnez

DIRECTOR

Ing. David Hernndez Santiago.

Xalapa Enrquez Veracruz.

2010

AGRADECIMIENTOS

A MIS PADRES
A quienes amo profundamente les dedico este trabajo recepcional, por haberme
brindado su compresin, su apoyo incondicional durante toda la carrera, por sus
consejos a orientarme a tomar las mejores decisiones y por creer en mi.
Porque han sabido crear el amor, ejemplo de conducta y sacrificio personal que
me permitieron una educacin de excelencia, un apoyo y estimulo constante
durante todo el tiempo, por mantener mi inquietud, mi ambicin y mis sueos.
A MI HERMANO
Uziel te agradezco por haber estado siempre a mi lado, gracias por tu cario.
A MI ROSITA.
Te agradezco mucho tu amor, t cario y por haber estado a mi lado alentndome
y apoyndome siempre para poder realizar este sueo. Te amo mi prietita.
A MI FAMILIA
Gracias a todos y cada uno de los miembros de mi familia que de una forma u otra
me apoyaron y estuvieron siempre conmigo, este trabajo tambin es de ustedes,
Mil Gracias.
AL ING. DAVID HERNANDEZ SANTIAGO
Por haberme asesorado, por demostrarme su preocupacin y apoyo para que este
trabajo quedara lo mejor realizado posible.

INDICE.
INTRODUCCION

1. ANTECEDENTES .............................................................................................. 5

2. ANALISIS DE CARGAS ................................................................................... 6


2.1 CALCULO DE REACCIONES ....................................................................... 8
2.1.1 REACCIONES CUANDO LA GRA SE ENCUENTRA AL CENTRO
DE LA CRUJIA........................................................................................ 8
2.1.2 REACCIONES CUANDO LA GRA SE ENCUENTRA SOBRE EL
APOYO ................................................................................................... 9

3. ANALISIS ESTRUCTURAL ............................................................................ 10


3.1 ANALISIS DE LA TRABE CARRIL .............................................................. 11
3.2 ANALISIS DE COLUMNAS ......................................................................... 67
3.3 ANALISIS DE LA TRABE CARRIL CUANDO LA CARGA MAXIMA
SE ENCUENTRA SOBRE EL APOYO ...................................................... 130
3.4 ANALISIS DE LAS COLUMNAS CUANDO LA CARGA MAXIMA
SE ENCUENTRA SOBRE EL APOYO ...................................................... 132

4. DISEO ESTRUCTURAL ............................................................................. 134


4.1 DISEO DE UNA ZAPATA AISLADA ....................................................... 134
4.2 DISEO DE COLUMNAS ......................................................................... 143
4.2.1 PROPIEDADES DE DISEO DEL PERFIL
DE SECCION EN CAJON.................................................................. 143
4.2.2 PROPIEDADES DE DISEO DEL PERFIL
DE SECCION I................................................................................... 148
1

4.3 CARGA PERMISIBLE DE COMPRESION DE LA SECCION EN CAJON 156


4.3.1 SECCION NECESARIA PARA LA COLUMNA
DE SECCION EN CAJON.................................................................. 157
4.4 CARGA PERMISIBLE DE COMPRESION DE LA SECCION I ................. 158
4.4.1 SECCION NECESARIA PARA LA COLUMNA
DE SECCION I................................................................................... 159
4.6 DISEO TRABE CARRIL.......................................................................... 160
4.6.1 PROPIEDADES DE DISEO DEL PERFIL DE SECCION I ............... 160
4.6.2 REVISION POR FLEXION DE LA TRABE CARRIL .............................. 168
4.6.3 REVISION POR CORTANTE DE LA TRABE CARRIL ......................... 169
4.6.4 REVISION POR FLECHA (DEFLEXION) DE LA TRABE CARRIL .... 170
4.6.5 MOMENTO RESISTENTE DE LA TRABE CARRIL ............................. 171
4.6.6 MOMENTO ULTIMO DE LA TRABE CARRIL ....................................... 172
4.7 DETALLES ................................................................................................ 174
4.7.1 CALCULO DE LA BASE PARA LA COLUMNA ..................................... 174
4.7.2 ANCLAS ...................................................................................................... 177
4.7.3 CARTELAS ................................................................................................. 177

ANEXOS ............................................................................................................ 178

CONCLUSION ................................................................................................... 181

BIBLIOGRAFIA.................................................................................................. 182

INTRODUCCION.
Las gras las podemos identificar como aquel equipo que nos permite
transportar material por el aire, nos permite realizar operaciones pesadas y
riesgosas, es un equipo de alto peso, las encontramos de diferentes tamaos y de
diferente presentacin.
Existen diferentes tipos de gras como lo son:

GRUAS VIAJERAS O PUENTE

GRUAS DE PORTICO

GRUAS DE PARED O LATERAL, ETC.

GRUAS VIAJERAS O PUENTE


Este tipo de gras se caracteriza por estar suspendidas a una altura
considerable por encima de los 15 mts., su capacidad de soportamiento es muy
grande, a travs de ellas se mueven grandes toneladas de un lugar a otro,
manejan voltajes elevados para su funcionamiento mayores a los 300 Volts,
adems de que su movimiento es muy lento.
Estas gras requieren en ocasiones de dos operadores cuando no se
cuenta con algn dispositivo de control remoto.
Este tipo de gra consta de tres partes principales:
o PUENTE.
Es todo el mecanismo de la gra y es el que realiza el movimiento de
traslacin, esto es, mueve todo el mecanismo de izquierda a derecha.
o CARRO.
Es el mecanismo que sostiene todo el equipo del sistema de izaje, teniendo
movimientos de adentro hacia a fuera y viceversa.
o IZAJE.
Esta parte es la que realiza los movimientos de levantamiento y descenso
de cargas.

GRA DE PORTICO.
Este tipo de gruas son muy semejantes a las viajeras pero la altura a la cual se
encuentran instaladas es mucho menor.
Estas gruas se caracterizan por estar suspendidas solamente de un solo
lado y el otro se desliza por el suelo sobre rieles, tambin pueden ser manejadas a
control remoto o bien por dos operadores, el sealista y el que ejecuta los
movimientos directos en el equipo.

GRA DE PARED O LATERAL.


Estas gruas son completamente diferentes a las anteriores pues se encuentra
sujetada de un extremo sobre la pared, su capacidad de soporte es muy baja,
al igual que su altura a la cual estn instaladas.

A continuacin se muestra el arreglo de una gra viajera o puente y de sus tres


movimientos principales.

PROYECTO ESTRUCTURAL DE UN SISTEMA PARA


SOPORTAR UNA GRUA VIAJERA.

1. ANTECEDENTES.
Una empresa particular desea construir una estructura para una gra viajera
que es parte de un proyecto de una planta de perfiles estructurales, dicha planta
tiene la finalidad de abastecer de materiales a la misma empresa para la
construccin de un edificio a base de perfiles estructurales.
Para la realizacin de la estructura que soportara a la gra se utilizaran perfiles
con los que cuenta la empresa y se busca determinar si es factible su utilizacion
para soportar dicha estructura.
Esta planta donde se construir la estructura para la gra se encuentra
localizada el la Localidad de La Estanzuela en el Municipio de Emiliano Zapata,
sobre la carretera Trancas-Coatepec, aproximadamente a 10 minutos de las
trancas.

CROQUIS DE
LOCALIZACION:

2. ANALISIS DE CARGAS.
Las cargas dominan el diseo estructural de muchas estructuras de apoyo en la
gra; se consideran por separado las cargas de los dems cargas vivas debido a
el uso y la ocupacin y los efectos ambientales tales como lluvia, nieve, viento,
terremotos, cargas laterales debido a la presin del suelo y del agua, temperatura
y efectos, ya que son independientes de ellos. En este caso quedan sin
considerarse los efectos ambientales ya que la estructura se en encuentra dentro
de una bodega.

Las Gras Viajeras tienen muchas caractersticas nicas que conducen a las
siguientes consideraciones
a) Un factor de impacto, aplicados a la carga vertical de la rueda para tener en
cuenta los efectos dinmicos como cuando la gra se mueve y para otros
efectos tales como el frenado del mecanismo elevador.
b) Para mltiples gras en un pasillo o gras en varios pasillos, las
combinaciones de carga se limitan a aquellos con una probabilidad
razonable de que se produzca.

Esta gra tiene una capacidad de carga de 22 ton, se considera 1.5 ton como
peso propio de la gra y su servicio es mediano (C), se considera un impacto
vertical del 25%, segn el Manual de Construccin en Acero del IMCA; vase tabla
1.

TABLA 1

CLASE C (Servicio Mediano)


Este tipo de servicio incluye las gras utilizadas en instalaciones tales como:
talleres de maquinado, lneas de proceso con nivel medio de produccin, cuarto
para maquinaria de molinos de papel y en todas aquellas instalaciones en donde
las necesidades de servicio son moderadas.
En este tipo de servicio, la gra podr hacer de 5 a 10 levantamientos por hora
manejando cargas con un valor promedio del 50% del rango de plena capacidad y
para una altura de levantamiento promedio de cinco metros.
El nmero de levantamiento por hora con cargas cuyo valor sea igual al de plena
capacidad de la gra no deber ser mayor del 50% del nmero de levantamientos
especificados.

2.1

CALCULO DE REACCIONES.

2.1.1 REACCIONES CUANDO LA GRA SE ENCUENTRA AL CENTRO DE LA


CRUJIA

2.1.2 REACCIONES CUANDO LA GRA SE ENCUENTRA SOBRE EL APOYO

3. ANALISIS ESTRUCTURAL.
El anlisis estructural fue realizado por medio del software

RAM Advanse

NOMBRES DE LOS MIEMBROS DE LA ESTRUCTURA ASIGNADOS POR EL


SOFTWARE.

10

3.1 ANALISIS DE LA TRABE CARRIL.


DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA
SE ENCUENTRA AL CENTRO DE LA CRUJA 1.
------------------------------------------------------------------------------------------------------------------------------------------------------------------

c10=1.2pp+0.5sc+eqz
MIEMBRO :15

Largo

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

: 6.210

NudoJ : 16
NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado: c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

11

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 2

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado: c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 10

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 11

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 12

Largo

: 6.210

NudoJ : 10

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

13

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 13

Largo

: 6.210

NudoJ : 12

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 14

Largo

: 6.210

NudoJ : 14

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 17

Largo

: 6.210

NudoJ : 18

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 19

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 25

Largo

: 6.210

NudoJ : 22

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

15

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 26

Largo

: 6.210

NudoJ : 24

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 27

Largo

: 6.210

NudoJ : 26

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

16

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 28

Largo

: 6.210

NudoJ : 28

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 29

Largo

: 6.210

NudoJ : 30

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

17

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 30

Largo

: 6.210

NudoJ : 32

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado: c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

18

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 2.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO :15

Largo

: 6.210

NudoJ : 16

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado: c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

19

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 2

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 10

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

20

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 11

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 12

Largo

: 6.210

NudoJ : 10

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

21

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 13

Largo

: 6.210

NudoJ : 12

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 14

Largo

: 6.210

NudoJ : 14

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 17

Largo

: 6.210

NudoJ : 18

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 19

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 25

Largo

: 6.210

NudoJ : 22

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

23

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 26

Largo

: 6.210

NudoJ : 24

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 27

Largo

: 6.210

NudoJ : 26

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 28

Largo

: 6.210

NudoJ : 28

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 29

Largo

: 6.210

NudoJ : 30

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

25

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 30

Largo

: 6.210

NudoJ : 32

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

26

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 3.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 15

Largo

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

: 6.210

NudoJ : 16
NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

27

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 2

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 10

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 11

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 12

Largo

: 6.210

NudoJ : 10

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

29

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 13

Largo

: 6.210

NudoJ : 12

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 14

Largo

: 6.210

NudoJ : 14

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 17

Largo

: 6.210

NudoJ : 18

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 19

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 25

Largo

: 6.210

NudoJ : 22

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

31

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 26

Largo

: 6.210

NudoJ : 24

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 27

Largo

: 6.210

NudoJ : 26

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

32

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 28

Largo

: 6.210

NudoJ : 28

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 29

Largo

: 6.210

NudoJ : 30

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

33

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 30

Largo

: 6.210

NudoJ : 32

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

34

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 4.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 15

Largo

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

: 6.210

NudoJ : 16
NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

35

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 2

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 10

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

36

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 11

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 12

Largo

: 6.210

NudoJ : 10

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

37

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 13

Largo

: 6.210

NudoJ : 12

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 14

Largo

: 6.210

NudoJ : 14

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

38

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 17

Largo

: 6.210

NudoJ : 18

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 19

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 25

Largo

: 6.210

NudoJ : 22

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

39

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 26

Largo

: 6.210

NudoJ : 24

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 27

Largo

: 6.210

NudoJ : 26

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

40

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 28

Largo

: 6.210

NudoJ : 28

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 29

Largo

: 6.210

NudoJ : 30

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

41

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 30

Largo

: 6.210

NudoJ : 32

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

42

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 5.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 15

Largo

: 6.210

NudoJ : 16

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

43

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 2

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 10

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

44

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 11

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 12

Largo

: 6.210

NudoJ : 10

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

45

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 13

Largo

: 6.210

NudoJ : 12

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 14

Largo

: 6.210

NudoJ : 14

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

46

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 17

Largo

: 6.210

NudoJ : 18

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 19

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 25

Largo

: 6.210

NudoJ : 22

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

47

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 26

Largo

: 6.210

NudoJ : 24

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 27

Largo

: 6.210

NudoJ : 26

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

48

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 28

Largo

: 6.210

NudoJ : 28

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 29

Largo

: 6.210

NudoJ : 30

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

49

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 30

Largo

: 6.210

NudoJ : 32

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

50

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 6.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 15

Largo

: 6.210

Nudo J : 16

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo K : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

51

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 2

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo J :

Nudo K :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 10

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo J :

Nudo K :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

52

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 11

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo J :

Nudo K :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 12

Largo

: 6.210

Nudo J : 10

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo K :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

53

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 13

Largo

: 6.210

Nudo J : 12

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo K : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 14

Largo

: 6.210

Nudo J : 14

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo K : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

54

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 17

Largo

: 6.210

Nudo J : 18

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo K : 19

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 25

Largo

: 6.210

Nudo J : 22

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo K : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

55

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 26

Largo

: 6.210

Nudo J : 24

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo K : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 27

Largo

: 6.210

Nudo J : 26

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo K : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

56

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 28

Largo

: 6.210

Nudo J : 28

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo K : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 29

Largo

: 6.210

Nudo J : 30

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

Nudo K : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

57

MIEMBRO : 30

Largo

: 6.210

NudoJ : 32

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

58

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 7.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 30

Largo

: 6.210

NudoJ : 32

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

59

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 2

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 10

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

60

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 11

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 12

Largo

: 6.210

NudoJ : 10

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

61

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 13

Largo

: 6.210

NudoJ : 12

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 14

Largo

: 6.210

NudoJ : 14

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

62

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 15

Largo

: 6.210

NudoJ : 16

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 17

Largo

: 6.210

NudoJ : 18

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 19

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

63

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 25

Largo

: 6.210

NudoJ : 22

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 26

Largo

: 6.210

NudoJ : 24

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

64

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 27

Largo

: 6.210

NudoJ : 26

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 28

Largo

: 6.210

NudoJ : 28

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

65

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 29

Largo

: 6.210

NudoJ : 30

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

66

3.2 ANLISIS DE LAS COLUMNAS.

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 1.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 9

Largo

: 6.200

NudoJ : 15

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 16

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

67

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 1

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 3

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

68

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 4

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 5

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

69

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 6

Largo

: 6.200

NudoJ :

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 7

Largo

: 6.200

NudoJ : 11

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

70

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 8

Largo

: 6.200

NudoJ : 13

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 16

Largo

: 6.200

NudoJ : 17

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

71

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 18

Largo

: 6.200

NudoJ : 19

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 20

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 19

Largo

: 6.200

NudoJ : 21

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

72

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 20

Largo

: 6.200

NudoJ : 23

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 21

Largo

: 6.200

NudoJ : 25

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

73

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 22

Largo

: 6.200

NudoJ : 27

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 23

Largo

: 6.200

NudoJ : 29

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

74

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 24

Largo

: 6.200

NudoJ : 31

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 32

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

75

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 2.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 9

Largo

: 6.200

NudoJ : 15

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 16

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

76

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 1

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 3

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

77

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 4

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 5

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

78

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 6

Largo

: 6.200

NudoJ :

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 7

Largo

: 6.200

NudoJ : 11

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

79

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 8

Largo

: 6.200

NudoJ : 13

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 16

Largo

: 6.200

NudoJ : 17

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

80

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 18

Largo

: 6.200

NudoJ : 19

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 20

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 19

Largo

: 6.200

NudoJ : 21

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

81

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 20

Largo

: 6.200

NudoJ : 23

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 21

Largo

: 6.200

NudoJ : 25

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

82

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 22

Largo

: 6.200

NudoJ : 27

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 23

Largo

: 6.200

NudoJ : 29

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

83

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 24

Largo

: 6.200

NudoJ : 31

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 32

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

84

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 3.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 9

Largo

: 6.200

NudoJ : 15

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 16

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

85

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 1

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 3

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

86

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 4

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 5

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

87

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 6

Largo

: 6.200

NudoJ :

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 7

Largo

: 6.200

NudoJ : 11

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

88

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 8

Largo

: 6.200

NudoJ : 13

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 16

Largo

: 6.200

NudoJ : 17

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

89

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 18

Largo

: 6.200

NudoJ : 19

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 20

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 19

Largo

: 6.200

NudoJ : 21

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

90

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 20

Largo

: 6.200

NudoJ : 23

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 21

Largo

: 6.200

NudoJ : 25

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

91

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 22

Largo

: 6.200

NudoJ : 27

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 23

Largo

: 6.200

NudoJ : 29

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

92

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 24

Largo

: 6.200

NudoJ : 31

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 32

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

93

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 4.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 9

Largo

: 6.200

NudoJ : 15

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 16

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

94

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 1

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 3

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

95

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 4

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 5

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

96

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 6

Largo

: 6.200

NudoJ :

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 7

Largo

: 6.200

NudoJ : 11

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

97

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 8

Largo

: 6.200

NudoJ : 13

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 16

Largo

: 6.200

NudoJ : 17

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

98

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 18

Largo

: 6.200

NudoJ : 19

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 20

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33 Esfuerzos cortantes V2
Momentos [Ton*M], Long [M]
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 19

Largo

: 6.200

NudoJ : 21

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

99

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 20

Largo

: 6.200

NudoJ : 23

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 21

Largo

: 6.200

NudoJ : 25

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

100

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 22

Largo

: 6.200

NudoJ : 27

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 23

Largo

: 6.200

NudoJ : 29

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

101

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 24

Largo

: 6.200

NudoJ : 31

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 32

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

102

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 5.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 9

Largo

: 6.200

NudoJ : 15

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 16

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

103

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 1

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 3

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

104

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 4

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 5

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

105

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 6

Largo

: 6.200

NudoJ :

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 7

Largo

: 6.200

NudoJ : 11

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

106

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 8

Largo

: 6.200

NudoJ : 13

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 16

Largo

: 6.200

NudoJ : 17

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

107

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 18

Largo

: 6.200

NudoJ : 19

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 20

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 19

Largo

: 6.200

NudoJ : 21

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

108

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 20

Largo

: 6.200

NudoJ : 23

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 21

Largo

: 6.200

NudoJ : 25

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

109

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 22

Largo

: 6.200

NudoJ : 27

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 23

Largo

: 6.200

NudoJ : 29

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

110

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 24

Largo

: 6.200

NudoJ : 31

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 32

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

111

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 6.

______________________________________________________________________________________________________________________

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 9

Largo

: 6.200

NudoJ : 15

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 16

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

112

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 1

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 3

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

113

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 4

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 5

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

114

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 6

Largo

: 6.200

NudoJ :

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 7

Largo

: 6.200

NudoJ : 11

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

115

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 8

Largo

: 6.200

NudoJ : 13

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 16

Largo

: 6.200

NudoJ : 17

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

116

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 18

Largo

: 6.200

NudoJ : 19

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 20

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 19

Largo

: 6.200

NudoJ : 21

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

117

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 20

Largo

: 6.200

NudoJ : 23

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 21

Largo

: 6.200

NudoJ : 25

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

118

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 22

Largo

: 6.200

NudoJ : 27

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 23

Largo

: 6.200

NudoJ : 29

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

119

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 24

Largo

: 6.200

NudoJ : 31

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 32

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

120

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA AL CENTRO DE LA CRUJA 7.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 9

Largo

: 6.200

NudoJ : 15

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 16

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

121

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 1

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 3

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

122

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 4

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 5

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

123

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 6

Largo

: 6.200

NudoJ :

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 10

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 7

Largo

: 6.200

NudoJ : 11

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 12

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

124

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 8

Largo

: 6.200

NudoJ : 13

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 16

Largo

: 6.200

NudoJ : 17

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 18

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

125

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 18

Largo

: 6.200

NudoJ : 19

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 20

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 19

Largo

: 6.200

NudoJ : 21

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 22

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

126

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 20

Largo

: 6.200

NudoJ : 23

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 24

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 21

Largo

: 6.200

NudoJ : 25

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 26

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

127

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 22

Largo

: 6.200

NudoJ : 27

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 28

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 23

Largo

: 6.200

NudoJ : 29

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 30

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

128

------------------------------------------------------------------------------------------------------------------------------------------------------------------

MIEMBRO : 24

Largo

: 6.200

NudoJ : 31

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoK : 32

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

129

3.3 ANLISIS DE LA TRABE CARRIL CUANDO LA CARGA


MXIMA SE ENCUENTRA SOBRE EL APOYO.

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA SOBRE EL APOYO.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 2

Largo

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

: 6.210

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

130

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 15

Largo

: 6.210

Material : Steel\A36

Seccin : PlaSolT-1 50x30x1.87

NudoJ : 16
NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

131

3.4 ANLISIS COLUMNAS CUANDO LA CARGA MXIMA SE


ENCUENTRA SOBRE EL APOYO.

DIAGRAMAS DE MOMENTOS Y CORTANTE, CUANDO LA CARGA MXIMA


SE ENCUENTRA SOBRE EL APOYO.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 8

Largo

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

: 6.200

NudoJ : 13
NudoK : 14

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Momentos flectores M33
Momentos [Ton*M], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

132

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estados considerados:
c10=1.2pp+0.5sc+eqz
MIEMBRO : 1

Largo

: 6.200

Material : Steel\A36

Seccin : PlaSol 45x25x2.5

NudoJ :

NudoK :

------------------------------------------------------------------------------------------------------------------------------------------------------------------

Estado : c10=1.2pp+0.5sc+eqz
Esfuerzos cortantes V2
Fuerzas [Ton], Long [M]

------------------------------------------------------------------------------------------------------------------------------------------------------------------

133

4. DISEO ESTRUCTURAL.

4.1DISEODEUNAZAPATAAISLADA
P=
41.84
fc=
250
Fy=
4200
secccolumna
ancho=
largo=
seccdado
ancho=
largo=
Qn=
15
PD=
1.20

ton
kg/cm2
kg/cm3
25
45
35
55
ton/m2
m

(incluyepesopropiodelacolumna)

cm
cm

0.25
0.45

m
m

cm
cm

0.35
0.55

m
m

concreto
reforzado=

1400

kg/m3

2400

kg/m3

1.PESOPROPIODELDADO
1.200.30=

0.90

Wpd=0.35mx0.55mx0.90mx2400kg/m3= 415.80 kg

42.26 Ton

2.PESOPROPIODELSUELO.

0.25

0.95

134

3.PESOPROPIOZAPATA

0.6

t/m2

4.CAPACIDADNETADELSUELO.

13.07 t/m2

5.AREADECIMENTACIONNECESARIA.

3.23

m2

6.PARAUNAZAPATACUADRADA.

1.80

7.PARAUNAZAPATARECTANGULAR.
seproponeunadelasdimensiones
L1=
L2=

1.50

m
2.16

m
135

8.REVISIONDELPERALTE.
h=
rec=

30
5

cm
cm
d=hrec=

25

cm

12.50

dado= 0.35+(12.50x2)=
0.55+(12.50x2)=

0.60
0.80

cm

m
m

9.CORTANTEPORPENETRACION.

35.98 ton

42.33

ton
136

K=

0.85

dereglamento

Revisindelperalte
hp=
dp=hrec=305=

30.00
25.00

cm
cm

dado=35x55cm

8.38

kg/cm2

12.50 cm

bo=2(60+80)=

280

42.33 ton

18.04 cm

137

10.OBTENCIONDELAREADEACERO.

6.32 tm
632000 kgcm
1er.Tanteo

Z=

23

cm

7.27

cm

0.96

24.52

23

138

Z=

2do.Tanteo
24.50
cm

6.82

cm

0.90

24.55

24.50

0.0026

(dereglamento)

9.75

9.75
RIGEAs=

9.75

cm2

6.82
cm2

Separacin
ProponemosVsNo.4

7.68

19.54

139

11.AREADEACEROSENTIDOCORTO

4.66 tm
466000 kgcm

1er.Tanteo
Z= 24.00

cm

5.14

cm

0.47

24.76

24.00

140

2do.Tanteo
Z= 24.70

cm
4.99

cm

0.46

24.77

24.70

0.0026 (dereglamento)

14.01

14.01
RIGEAs=

4.99
14.01

cm

DEACUERDOALREGLAMENTO

1.44

11.50
AsFRANJA=

11.50 cm2

SEPARACIONDELREFUERZOENLAFRANJACENTRAL

16.57
SEPARACIONDELREFUERZOENFRANJASDELBORDE
75.84
141

DADO.

Dimensiones del dado de 0.35 x 0.55, armado con 4 Vs de 3/4" y Estribos de 3/8
a cada 15 cms.

142

4.2

DISEO DE COLUMNAS

4.2.1 PROPIEDADES DE DISEO DEL PERFIL DE SECION


EN CAJON.
PROPIEDADESGEOMETRICAS(PROPIEDADESDEDISEO)DELACOLUMNADESECCIONTRANSVERSALEN
CAJON,HECHACONCUATROPLACASSOLDADAS,ACERONOMB254(ASTMA36).

d=
b=
t=
dw=
dw+tf/2=

450.00
250.00
12.50
425.00
218.75

mm
mm
mm
mm
mm

=
=
=
=
=

SOLUCION=
1.AREADELASECCIONTRANSVERSAL

168.75 cm

Peso=0.785A=0.785x168.75= 132.47 kg/m


143

45.00
25.00
1.25
42.50
21.88

cm
cm
cm
cm
cm

2.MOMENTODEINERCIACONRESPECTOALEJEDEMAYORRESISTENCIA(ejeXX),Ix

45908 cm4

Obienaplicandoelteoremadelosejes
paralelos.

45908 cm4

3.MODULODESECCIONELASTICO,Sx.

2040 cm3

4.RADIODEGIRO,rx.

16.49

cm

18.45

cm

5.MOMENTODEINERCIAALREDEDORDELEJEYY(ejedemenorresistencia),Iy

21212

cm4

21212

cm4
144

6.MODULODESECCIONELASTICO,Sy.

1697

cm3

7.RADIODEGIRO,ry.

11.21

cm

16.20

cm

8.CONSTANTEDETORSIONDESAINTVENANT,J

41811 cm4

9.MODULOSDESECCIONPLASTICOSZxYZy.

2496

cm3

1546

cm3

2326 cm3

1935 cm3
10. LONGITUD DE LOS SOPORTES LATERALES DEL PATIN EN COMPRESION. ESPECIFICACIONES AISCASD1989,
SECCIONF3.1

835

cm
145

11.CALCULODELASLONGITUDESLuYLr,NORMASNTCRCDF
Longitud mxima no soportada lateralmente para la que el miembro puede desarrollar el momento
plstico,ylalongitudqueseparalosintervalosdeaplicacindelasecuaciones3.3.11y3.3.12delas
NTCRCDF2000

donde:
E= modulodeelasticidad,enkg/cm2
C= coeficiente a dimensional que depende de la ley de variacin del
momento flexionante a lo largo del eje de la barra de flexin o en
flexocompresionypuedetomarseconservadoramenteigualalaunidad
Z=
Fy=
Iy=
J=

modulodeseccinplstico,encm3
esfuerzodefluenciadelaceroenkg/cm2
momentodeinerciadelejedemenormomentodeinercia,encm4
constantedeSaintVenant,encm4

8750

cm

28176 cm

12.CALCULODELr,ESPECIFICACIONESAISCLRFD1993,PARASECCIONESENCAJON.

23118 cm

146

PROPIEDADESGEOMETRICAS(PROPIEDADESDEDISEO)DELACOLUMNADESECCIONTRANSVERSALEN
CAJON,HECHACONCUATROPLACASSOLDADAS,ACERONOMB254(ASTMA36).

A=
Peso=
Ix=
Sx=
rx=
Iy=
Sy=
ry=
J=
Zx=
Zy=

168.75
132.47
45908
2040
16.49
21212
1697
11.21
41811
2496
1546

cm
kg/m
cm4
cm3
cm
cm4
cm3
cm
cm4
cm3
cm3

LONGITUDES

Lc=
Lu=
Lr=

835
8750
28176

cm
cm
cm

AISCASD
NTC2000
NTC2000

147

4.2.2 PROPIEDADES DE DISEO DEL PERFIL DE SECCION I.


PROPIEDADES GEOMETRICAS (PROPIEDADES DE DISEO) DE LA COLUMNA DE SECCION TRANSVERSAL I,
HECHACONTRESPLACASSOLDADAS,ACERONOMB254(ASTMA36).

d=
bf=
tw=
tf=
dw=

457.00
279.00
7.81
7.81
441.38
224.60

mm
mm
mm
mm
mm
mm

=
=
=
=
=
=

SOLUCION=
1.AREADELASECCIONTRANSVERSAL

A=
Peso=0.785A=

61.27

78.05

cm2

kg/m
148

45.70
27.90
0.781
0.781
44.14
22.46

cm
cm
cm
cm
cm
cm

2.AREADELALMA
Aw=dwtw=(d2tf)tw=

34.47

cm2

3.MOMENTODEINERCIACONRESPECTOALEJEDEMAYORRESISTENCIA(ejeXX),Ix
Ix=1/2(bfd^3(bftw)(d2tf)^3)=

27582 cm4

Obienaplicandoelteoremadelosejes
paralelos.

Ix=

27582

cm4

4.MODULODESECCIONELASTICO,Sx.
Sx=2Ix/d=2x28018/45.70=

1207

Sx2Arx^2/d=2x79.33x18.79^2/45.70=

cm3
1207

cm3

5.RADIODEGIRO,rx.

18.80

cm

18.74

cm

6.MOMENTODEINERCIAALREDEDORDELEJEYY(ejedemenorresistencia),Iy

Iy=

2829

cm4

Utilizandoelteoremadelosejesparalelos.

2829

cm4

2829

cm4
149

7.RELACIONIx/Iy

9.75

10

8.COEFICIENTESDEFLEXION,BxYBy.

0.065

cm1

0.385

cm1

9.MODULODESECCIONELASTICO,Sy.

203

cm3

203

cm3

10.RADIODEGIRO,ry.

6.02

cm

6.975

cm

11.CONSTANTEDETORSIONDESAINTVENANT,J

17

cm4

150

12.CONSTANTEDETORSIONPORALABEO,Cw.

1426947 cm6

13.RADIODEGIRO,Rt.
RADIODEGIRODELASECCIONQUECOMPRENDEELPATINDECOMPRESIONYUNSEXTODELAREADELALMAEN
COMPRESION,TOMANDOCONRESPECTOAUNEJEQUEPASAPORELPLANODELALMA.

DETERMINACIONDELRADIODEGIROrt
1/6AREADELALMAENCOMPRESION

7.16

cm

151

14.MOMENTODEINERCIAPOLARRESPECTOALCENTRODECORTANTE,Ip.

30410 cm4

15.RELACION(PERALTEDELALMA/AREADELPATINENCOMPRESION),d/Af.

2.10

cm1

16.MODULOSDESECCIONPLASTICOSZxYZy.

1359

cm3

311

cm3

17.FACTORESDEFORMA.

1.13

1.53

18.FACTORDEPANDEODEVIGADEFINIDOMEDIANTELAESCUACIONF18(AISCLRFD1993).

83822

kg/cm2

152

19.FACTORDEPANDEODEVIGADEFINIDOPORLAECUACIONF19(AISCLRFD1993).

1.73E05 cm4/kg

301

cm

9.59E+02 cm

20.CALCULODEXuYXr.
COEFICIENTESUTILIZADOSENLAECUACION(3.27)Y(3.28)DELASNTCRCDF2000.

25.44

7.90

CONLAECUACIONSIMPLIFICADADELASNTCRCDF1995

32.71

CONLAECUACIONSIMPLIFICADA

10.20

LAS DOS ECUACIONES RESPECTIVAS PARA CALCULAR Xu Y Xr, PROPORCIONAN RESULTADOS


PRACTICAMENTEIGUALES.
153

21.CALCULODELONGITUDESLuYLr,ECUACIONES(3.37)Y(3.38),NTC2000,SEUSARANLOSVALORESXuY
XrDETERMINADOSCONLASECUACIONESDELNTCRCDF2000.

239 cm

449 cm

22.ENSECCIONESLAMINADASSOLDADASDESECCIONTRANSVERSALI,TAMBIENPUEDENUTILIZARSELAS
SIGUIENTESECUACIONESSIMPLIFICADAS:

1502

cm

874

cm

154

PROPIEDADES GEOMETRICAS (PROPIEDADES DE DISEO) DE LA COLUMNA DE SECCION TRANSVERSAL I,


HECHACONTRESPLACASSOLDADAS,ACERONOMB254(ASTMA36).

A= 78.05 cm2
Peso= 61.27 kg/m
d/Af= 2.10 cm1
Ix= 27582 cm4
Sx= 1207 cm3
rx= 18.80 cm
Iy= 2829 cm4
Sy=
203 cm3
ry= 6.02 cm
J=
17
cm4
Cw= 1426947 cm6
rt= 7.16 cm

Zx=
1359
cm3
Zy=
311
cm3
X1=
83822 kg/cm2
X2= 1.73E05 cm4/kg
Lr= 9.59E+02 cm
Lp=
301
cm
Xu=
25.44 NTC2000
Xu=
32.71 NTC1995
Xr=
7.90
NTC2000
Xr=
10.20 NTC1995
Lu=
239
cm
NTC2000
Lu=
874
cm
NTC1995
Lr=
449
cm
NTC2000
Lr=
1502
cm
NTC1995

155

4.3

CARGAPERMISIBLEDE COMPRESIONDELASECCION
ENCAJON.

41.02

A=
r=rmin=
L=

ton

168.75 cm
11.21 cm
6.20 m

0.112 cm

K= 0.65
(Tabladelongitudesefectivas,pg.349Manual
IMCA)

35.94

36.00

Fa de la tabla 3 (Esfuerzos Permisibles para


MiembrosaCompresin,pg.248ManualIMCA)
Fa=

1371

kg/cm2
231356 kg
231.36 ton

156

4.3.1SECCIONNECESARIAPARALACOLUMNADESECCION
ENCAJON
41.02 ton
41020 kg

Fy=
r=rmin=
L=
A=

2530
11.21
6.20
168.75

kg/cm2
cm
m
cm

0.1121 cm

SuponemosunKL/r= 50
Fa=
1290 kg/cm2

31.80

cm2

55.30

55.00

Fadelatabla3(EsfuerzosPermisiblesparaMiembrosa
Compresin,pg.248ManualIMCA)
Fa=

1259

kg/cm2

212456 kg
212.46 ton

157

4.4CARGAPERMISIBLEDECOMPRESIONDELASECCIONI

41.02 ton

A=
r=rmin=
L=

78.05
6.02
6.20

cm2

cm

0.0602 cm

K= 0.65
(Tabladelongitudesefectivas,pg.349Manual
IMCA)

67.00

66.94

Fa de la tabla 3 (Esfuerzos Permisibles para


MiembrosaCompresin,pg.248ManualIMCA)
Fa=

1177

kg/cm2

91866.71
91.87

kg
ton

158

4.4.1SECCIONNECESARIAPARALACOLUMNADESECCIONI

41.02
41020

ton
kg

2530
78.05
6.02
6.20

kg/cm2
cm2
cm
= 0.0602 cm
m

Fy=
A=
r=rmin=
L=

SuponemosunKL/r=
50
Fa=
1290
kg/cm2

31.80

cm2

102.99

103.00

Fa de la tabla 3 (Esfuerzos Permisibles para Miembros a


Compresin,pg.248ManualIMCA)
Fa=

885

kg/cm2

69075.65 kg
69.08 ton

159

4.6 DISEO TRABE CARRIL.

4.6.1 PROPIEDADES DE DISEO DEL PERFIL DE SECCION I.


PROPIEDADES GEOMETRICAS (PROPIEDADES DE DISEO) DE LA VIGA DE SECCION TRANSVERSAL I,
HECHACONTRESPLACASSOLDADAS,ACERONOMB254(ASTMA36).

d=
bf=
tw=
tf=
dw=
dw+tf/2=

500.00
300.00
18.75
18.75
462.50
240.63

mm
mm
mm
mm
mm
mm

=
=
=
=
=
=

50.00
30.00
1.875
1.875
46.25
24.06

SOLUCION=
1.AREADELASECCIONTRANSVERSAL

A=
Peso=0.785A=

199.22

cm2

156.39 kg/m
160

cm
cm
cm
cm
cm
cm

2.AREADELALMA
Aw=dwtw=(d2tf)tw=

86.72

cm2

3.MOMENTODEINERCIACONRESPECTOALEJEDEMAYORRESISTENCIA(ejeXX),Ix
Ix=1/2(bfd^3(bftw)(d2tf)^3)= 80629 cm4
Obienaplicandoelteoremadelosejes
paralelos.
Ix=Io+Ad^3= 2((30x1.875^3)/12)+((46.25^3x1.875)/12)+2(1.875x30x24.06)=
Ix= 80629 cm4

4.MODULODESECCIONELASTICO,Sx.
Sx=2Ix/d=2x80629/50=

3225

Sx2Arx^2/d=2x199.22x20.11^2/50=

cm3
3225

cm3

5.RADIODEGIRO,rx.

20.12

cm

20.50

cm

6.MOMENTODEINERCIAALREDEDORDELEJEYY(ejedemenorresistencia),Iy

Iy=

8463

cm4

Utilizandoelteoremadelosejesparalelos.

8463

cm4

8463

cm4
161

7.RELACIONIx/Iy

9.53

10

8.COEFICIENTESDEFLEXION,BxYBy.

0.062

cm1

0.353

cm1

9.MODULODESECCIONELASTICO,Sy.

564

cm3

564

cm3

233

cm4

196

cm4

10.RADIODEGIRO,ry.

6.52

cm

7.5

cm

11.CONSTANTEDETORSIONDESAINTVENANT,J

162

12.CONSTANTEDETORSIONPORALABEO,Cw.

4900056 cm6

13.RADIODEGIRO,Rt.
RADIODEGIRODELASECCIONQUECOMPRENDEELPATINDECOMPRESIONYUNSEXTODELAREADEL
ALMAENCOMPRESION,TOMANDOCONRESPECTOAUNEJEQUEPASAPORELPLANODELALMA.

DETERMINACIONDELRADIODEGIROrt
1/6AREADELALMAENCOMPRESION

7.72

cm

163

14.MOMENTODEINERCIAPOLARRESPECTOALCENTRODECORTANTE,Ip.

89092 cm4

15.RELACION(PERALTEDELALMA/AREADELPATINENCOMPRESION),d/Af.

0.89

cm1

16.MODULOSDESECCIONPLASTICOSZxYZy.

3710

cm3

884

cm3

17.FACTORESDEFORMA.

1.15

1.57

18.FACTORDEPANDEODEVIGADEFINIDOMEDIANTELAESCUACIONF18(AISCLRFD1993).

188230

kg/cm2

164

19.FACTORDEPANDEODEVIGADEFINIDOPORLAECUACIONF19(AISCLRFD1993).

7.13E07 cm4/kg

326

cm

1.42E+03 cm

20.CALCULODEXuYXr.
COEFICIENTESUTILIZADOSENLAECUACION(3.27)Y(3.28)DELASNTCRCDF2000.

5.27

1.64

CONLAECUACIONSIMPLIFICADADELASNTCRCDF1995

6.79

CONLAECUACIONSIMPLIFICADA

2.12

165

LASDOSECUACIONESRESPECTIVASPARACALCULARXuYXr,PROPORCIONANRESULTADOSPRACTICAMENTE
IGUALES.

21. CALCULO DE LONGITUDES Lu Y Lr, ECUACIONES (3.37) Y (3.38), NTC2000, SE USARAN LOS
VALORESXuYXrDETERMINADOSCONLASECUACIONESDELNTCRCDF2000.

280 cm

610 cm

22. EN SECCIONES LAMINADAS SOLDADAS DE SECCION TRANSVERSAL I, TAMBIEN PUEDEN


UTILIZARSELASSIGUIENTESECUACIONESSIMPLIFICADAS:

1754

cm

1188

cm

166

PROPIEDADES GEOMETRICAS (PROPIEDADES DE DISEO) DE LA VIGA DE SECCION


TRANSVERSALI,HECHACONTRESPLACASSOLDADAS,ACERONOMB254(ASTMA36).

A= 199.22 cm2
Peso= 156.39 kg/m
d/Af=
0.89 cm1
Ix= 80629 cm4
Sx= 3225 cm3
rx= 20.12 cm
Iy= 8463 cm4
Sy=
564 cm3
ry=
6.52 cm
J=
233 cm4
Cw= 4900056 cm6
rt=
7.72 cm

Zx=
3710 cm3
Zy=
884
cm3
X1= 188230 kg/cm2
X2= 7.13E07 cm4/kg
Lr= 1.42E+03 cm
Lp=
326
cm
Xu=
5.27
NTC2000
Xu=
6.79
NTC1995
Xr=
1.64
NTC2000
Xr=
2.12
NTC1995
Lu=
280
cm
NTC2000
Lu=
1188 cm
NTC1995
Lr=
610
cm
NTC2000
Lr=
1754 cm
NTC1995

167

4.6.2REVISIONPORFLEXIONDELATRABECARRIL.
UTILIZANDOFb=0.66FyDELMANUALIMCASECC.1.5.1.4FLEXION

Mmax= 31.9238 tm
DEL ANALISIS ESTRUCTURAL REALIZADO
3192380 kgcm CONELPROGRAMARAMADVANCE
Fy= 2530 kg/cm2

1912 cm3

3225

1912 O.K.

LASECCIONSELECCIONADAPASALAREVISICIONPORFLEXION.

168

4.6.3REVISIONPORCORTANTEDELATRABECARRIL

d=
bf=
tw=
tf=
dw=
Fy=

500.00
300.00
18.75
18.75
462.50
2530

mm
mm
mm
mm
mm
kg/cm2

=
=
=
=
=

50.00
30.00
1.875
1.875
46.25

K=Distanciadelafibraextremadelpatnalapuntadelfiletedelalma=15/16pulg.
15/16pulg=

3.28

cm

35.20

35.20 ton

43.44

23.17

70

128081 kg
128.08 ton

35.20 ton O.K.

LASECCIONSELECCIONADAPASALAREVISICIONPORCORTANTE.
YAQUEESMAYORELESFUERZOQUESOPORTAQUEELACTUANTE
169

cm
cm
cm
cm
cm

4.6.4REVISIONPORFLECHA(DEFLEXION)DELAVIGACARRIL

E=
Ix=
W=
L=
P=

2039000
80629
1.875
6.21
29.375

kg/cm2
cm4
ton/m
m
ton

= 18.75 kg/cm
= 621 cm
= 29375 kg

0.444

cm

1.035 cm

0.444 cm

170

4.6.5MOMENTORESISTENTEDELATRABE CARRIL
PROPIEDADESDELPERFILIS.

d= 500.00 mm =
bf= 300.00 mm =
tw= 18.75 mm =
tf= 18.75 mm =
Sx= 3225 cm3
Fy= 2530 kg/cm2

50.00
30.00
1.875
1.875

cm
cm
cm
cm

10.8

VERTABLA6
MANUALIMCA

26.67

31.6

VERTABLA6
MANUALIMCA

REQUISITOSDEUNA

SECCION COMPACTA

1669.80 kg/cm2

5385370 kgcm
53.85 tm

171

4.6.6MOMENTOULTIMODELATRABECARRIL
DETERMINACIONDELMu,CONSOPORTELATERALCOMPLETOPARALASSIGUIENTES
SITUACIONES:
A)USANDOLASESPECIFICACIONESLRFDYSUPONIENDODOSLINEASDETORNILLOSDE5/8"
B)USANDOLASESPECIFICACIONESLRFDYSUPONIENDOCUATROLINEASDETORNILLOSDE5/8"

d= 500.00 mm
bf= 300.00 mm
tw= 18.75
mm
tf= 18.75
mm
Zx= 3710
cm3
Fy= 2530 kg/cm2
Fu= 4080 kg/cm2

=
=
=
=

50.00
30.00
1.875
1.875

cm
cm
cm
cm

A)CONDOSAGUJEROSENCADAPATIN.
56.25 cm2
49.22 cm2
PARANOTENERREDUCCION,SEDEBETENER

150609 kg

128081 kg

PORLOQUENOSEREQUIEREREDUCCIONENELAREADELPATIN.
172

703919

B)CONCUATROAGUJEROSENCADAPATIN.

56.25

cm2

42.19 cm2

PARANOTENERREDUCCION,SEDEBETENER

129094 kg

128081 kg

PORLOQUENOSEREQUIEREREDUCCIONENELAREADELPATIN.

173

4.7 DETALLES
4.7.1CALCULODELABASEPARALACOLUMNA
P=
Fy=
fc=
d=
b=
tf=
tw=

41.84
2530
250
45
25
1.25
1.25

ton
= 41840 kg
kg/cm2
kg/cm2
cm
cm
cm
cm

PARAMAXIMOFp

956.34

cm2

1925

cm2

1.

118.78

cm2

239.09 cm2

1125

cm2

2.

11.38

44.92

cm

cm
(USE45cm)

25

cm

174

1125

3.

cm

37.19 kg/cm2

= 114.46

Fp=

4.

175

1.125

cm

2.50

cm

5.

0.20

0.64

0.47

8.39

175

6. C=MAX(1.125,2.50,8.39)
=

8.39

2.03

cm

USE1pulg

USARUNAPLACADE35x2.5x55CM
USARUNAPLACADE14x1x22PULG

PROPUESTA 1 DE UNION TRABE-COLUMNA .


Unin de T-1 y C-2, se usaran placas 18 x 18 x 5/8 soldada a la
columna.
Unin de T-1 y C-1, se usaran placas 45 cm x 25 cm x 5/8 soldada a
la columna.

PROPUESTA 2 DE UNION TRABE-COLUMNA .


Unin de T-1 y C-2, se usaran placas 18 x 18 x 5/8 soldada a la
columna.
Con 8 pernos de 5/8
Unin de T-1 y C-1, se usaran placas 45 cm x 25 cm x 5/8 soldada a
la columna.
Con 8 pernos de 5/8

176

4.7.2 ANCLAS.
Las bases de las columnas se anclaran con 10 redondos de 3/4" de 70 cm de
largo, en los lados largos de las columnas.

4.7.3 CARTELAS.
Se utilizaran cartelas metlicas de de espesor, para la base de la columnas con
la placa de unin con la zapata; adems tambin se utilizaran en la parte superior
para unir la trabe carril con las columnas.

177

ANEXOS

178

179

180

CONCLUSION.
Con la construccin de esta gra viajera se obtendrn los siguientes beneficios:
Se optimizaran las maniobras de carga y descarga de los diferentes
materiales que se utilizaran en dicha planta.
Disminucin de los gastos de los fletes de macheteros para cargas descargas y en tiempos muertos por falta de materiales.
Agilizacin de los procesos y se mejorara la respuesta al cliente.
Reduccin de riesgos en las maniobras de los materiales y de los
productos mismos que por las condiciones mismas de peso no son
fciles de maniobrar.
Incremento en las utilidades.
Incremento de la produccin.

181

BIBLIOGRAFIA.

Instituto Mexicano De La Construccin En Acero A. C. (2006), Manual de


Construccin en Acero-DEP Diseo Por Esfuerzos Permisibles, Mxico,
Limusa.

Instituto De Ingeniera, UNAM (Julio 1993); Comentarios, Ayudas De


Diseo Y Ejemplos De Las Normas Tcnicas Complementarias Para
Diseo Y Construccin De Estructuras Metlicas, DDF, Instituto De
Ingeniera, UNAM; Mxico, Volumen I;
Manual Of Steel Construction, Load & Resistance Factor Design, Volume
I; Second Edition; American Institute of Steel Construction, Inc.; United
States of America; 1994.
Manual Of Steel Construction, Allowable Stress Desing; Ninth Edition;
American Institute of Steel Construction, Inc.; United States of America.
Mc Cormac C., Jack(2002); Diseo De Estructuras De Acero, Mtodo
LRFD, Alfaomega, Mxico, Segunda Edicin.
Guide For The Desing Of Crane-Supporting Steel Structures;
MacCrimmon, R.A.; First Edition; Quadratone Graphics Ltd; Canada;
2004.
Mc Cormac C., Jack(2002); Diseo De Estructuras De Acero, Mtodo
ASD, Alfaomega, Mxico, Segunda Edicin.
Soto Rodrguez, Hctor, Diseo De Estructuras Metlicas.
http://www.imca.org.mx/
Apuntes tomados en clase de Miembros de concreto Reforzado, Anlisis
Estructural
y Mecnica de Materiales del Ing. David Hernndez
Santiago.
Apuntes tomados en clase de Miembros de Acero del Ing. Julio Labastida
Alvarez.

182

También podría gustarte