Documentos de Académico
Documentos de Profesional
Documentos de Cultura
AA Patented two-piece speaker system for suspended ceilings in division-oflabor installations: CS 120P plenum ceiling tile enclosure, 1' x 2' (30.5 cm x 61 cm), pair
CS 26T two-way speaker
cartridge, pair
Components available separately or
together as a CS1226T complete assembly AA Enclosure and speaker cartridge can be installed separately by low-voltage and AV system contractors AA Provides significant time and cost savings in ceiling speaker installation AA Fast-installing enclosure speeds installation; no tile bridge necessary AA UL 2043 plenum rated enclosure AA Low profile, 5" (12.7 cm) deep enclosure for plenum environments AA 3/4" (1.9 cm) dome tweeter AA 6.5" (16.5 cm) woofer with a tuned bass reflex port AA 8 ohm direct or 70/100 volt operation on a 6 position, behind-the-grille selector AA 30 watts continuous pink noise, 60 watts continuous program AA Compatible with US 2' x 2' ceiling grids and metric 600 mm x 600 mm ceiling grids AA MDF reinforced enclosure minimizes acoustical vibrations
The Extron CS 1226T is a patented, plenum rated, two-piece speaker system designed for division-of-labor installations. It consists of the CS 120P ceiling tile enclosure and a CS 26T two-way speaker cartridge. The CS 1226T features the latest speaker innovation from Extron, a unique speaker design that greatly simplifies ceiling speaker installation and delivers significant time and cost savings.
AA Thin bezel and magnetically attached grille AA 5 year parts and labor warranty
INTRODUCTION
The Extron SpeedMount Ceiling Speaker System is a patented low profile, plenum rated two-piece speaker system designed for division-of-labor installations. The innovative CS 1226T SpeedMount speaker system consists of the CS 120P plenum rated enclosure and a CS 26T two-way speaker cartridge. The CS 120P enclosure installs quickly into 2' x 2' or metric 600 mm x 600 mm suspended ceiling grids. The CS 26T speaker cartridge features a 6.5" (16.5 cm) woofer and a 3/4" (1.9 cm) tweeter in a coaxial design, and can be used in 70/100 volt or 8 ohm operation. The CS 1226T is available as a complete assembly, or the CS 120P and CS 26T can be purchased separately to accommodate division-of-labor installations, with the enclosures installed during rough-in and the speaker cartridges during final installation.
SPECIFICATIONS
CS 1226T SYSTEM CS 120P ANDCS 26T
Temperature/humidity Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, noncondensing Mounting Ceiling mountable with included hardware Regulatory compliance Safety CE, UL 2043, UL 1480 UL listed for use in plenum air spaces: Meets UL 2043 standard for heat and smoke release (only when CS 26T is used with CS 120P). Meets UL 1480 for commercial and professional audio systems. EMI/EMC CE, NFPA90, NFPA70A Warranty 5 years parts and labor NOTE: All nominal levels are at 10%.
KEY FEATURES
AA Patented two-piece speaker system for suspended ceilings in division-of-labor installations: CS 120P plenum enclosure, 1' x 2' (30.5 cm x 61 cm), pair CS 26T two-way speaker cartridge, pair Components available separately or together as a CS1226T complete assembly AA Enclosure and speaker cartridge can be installed separately by low-voltage and AV system contractors AA Provides significant time and cost savings in ceiling speaker installation AA Fast-installing enclosure speeds installation; no tile bridge necessary AA UL 2043 plenum rated enclosure AA Low profile, 5" (12.7 cm) deep enclosure for plenum environments AA 3/4" (1.9 cm) dome tweeter AA 6.5" (16.5 cm) woofer with a tuned bass reflex port AA 8 ohm direct or 70/100 volt operation on a 6 position, behind-the-grille selector: 8 ohm direct 70 volt: 16, 8, 4, 2, and 1 watt selectable 100 volt: 16, 8, 4, and 2 watt selectable AA Frequency response: 70 Hz to 20 kHz AA 30 watts continuous pink noise, 60 watts continuous program AA 90 conical dispersion AA Compatible with US 2' x 2' ceiling grids and metric 600 mm x 600 mm ceiling grids AA MDF reinforced enclosure minimizes acoustical vibrations AA Internal driver overload protection AA Thin bezel and magnetically attached grille AA Enhanced locking arms on the CS 26T for quick installation AA Grille and bezel are available in white only and may be painted to match environment AA 5 year parts and labor warranty
FEATURES
Labor and Cost Savings No separate tile bridge No C-rings No tile rails No small parts to lose Faster install
The CS 120P enclosure features an integrated tile bridge that evenly distributes the weight of the enclosure and the CS 26T speaker cartridge on the ceiling grid. This avoids the hardware traditionally needed to support conventional ceiling speakers, and reduces associated labor costs.
Ceiling Deck Shallow Plenum Return Air Space HVAC Ducting Fire Sprinkler Piping
Conventional ceiling speaker exceeds space limitations
Suspended Ceiling
Extron CS 1226T
Many conventional ceiling speaker back cans may not be ideal for ceiling space locations with obstructions such as fire sprinkler piping or HVAC ducting. The CS 120P features a shallow 5" profile for installation in areas with shallow clearances above the ceiling.
Extron
The CS 120P enclosures are delivered from the factory for installation into US-style 2' x 2' suspended ceiling grids. However, the CS 120P is compatible with metric 600 mm square ceiling grids as well. All that is necessary is to cut off the sizing tabs at the ends of the enclosure. The CS 120P can therefore be specified for a wide variety of worldwide suspended ceiling standards.
Extron
Extron
Plenum Rated
The UL 2043 rated enclosure is designed for plenum ceiling spaces. CS 120P Plenum Enclosure
Thin-Edged Bezel
Provides a refined appearance on the ceiling.
INSTALLATION
The innovative, patented two-piece design of the SpeedMount Ceiling Speaker System greatly simplifies installation of ceiling speakers. Instead of waiting until the final phase of installation, a low-voltage contractor can begin during rough-in by placing a CS 120P enclosure onto the ceiling grid, and running speaker cable through it. This leaves the AV installer with a simple procedure of connecting the CS 26T speaker cartridge to the cable and securing it into the ceiling.
During construction rough-in, a CS 120P enclosure is placed into a designated location on the ceiling grid. Speaker cable is passed through the opening of the CS 120P, and then the enclosure is secured to the upper ceiling deck.
During final construction, an AV installer connects the speaker cable to the CS 26T speaker cartridge, using the included captive screw connector.
The CS 26T is quickly secured to the CS 120P enclosure and ceiling tile using the four enhanced locking arms. A power tap selector is conveniently located on the front baffle edge.
The magnetically attached speaker grille quickly snaps into place inside the slim bezel, completing the installation and providing a finishing touch.
MODELS
The CS 1226T can be purchased as a complete system, or as separate components for a division-of-labor installation, so that the enclosures can initially be delivered to a low-voltage contractor, followed later by the speaker cartridges to the AV integrator.
ACCESSORIES
The CS 26T speaker cartridge can be installed as a standalone product in non-plenum ceiling spaces. An optional ceiling mount kit is available to serve as a tile bridge for a suspended ceiling grid installation.
Model CS 1226T
Model Version Description Ceiling Mount Kit CS 26T Ceiling Mount Kit
Model CS 120P
Model CS 26T
160.00 Hz 200.00 Hz
400.00 Hz 500.00 Hz
-60
60
-20 -30
-60
100 Hz - 200 Hz
-90
90
-40
250 Hz - 500 Hz
-90
-60
60
-20 -30
-60
-90
90
-40
-90
4.00 kHz 5.00 kHz 0 Deg 30 0 -10 60 -20 -30 90 -40 -30
-60
60
-20 -30
-60
4 kHz - 8 kHz
-90
90
-40
10 kHz - 20 kHz
-90
10K
20K
Ohms
20
10
5 20 Hz
50
100
200
500
1K
2K
5K
10K
20K
EUROPE +800.3987.6673
Inside Europe
ASIA +800.7339.8766
Inside Asia
+1.714.491.1500
+31.33.453.4040
+65.6383.4400
2013 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. Prices and specifications subject to change without notice.