Documentos de Académico
Documentos de Profesional
Documentos de Cultura
153 45 28 18
149 145
141 137 133 129 125 121 117 113 109 105
11.2 7.1 4.5 2.8 1.8 1.12 0.71 0.45 0.28 0.18
8 dB (x 2.5)
Allowable Good
Good
Large machines with Large machines operating at speeds rigid and heavy foundations whose natural above foundation frequency exceeds natural frequency machine speed (e.g. Turbo-machinery)
Group K
Group M
Group G
Group T
Note: These values, which are the upper limits of zones A, B and C respectively, should apply to radial vibration measurements on all bearing housings or pedestals and to axial vibration measurements on housings containing thrust bearing, under steadystate operating conditions at rated speed.
Not Permissible
Not Permissible
Not Permissible
A Single set of values, e.g. those applicable to the 132 to 225 mm shaft height, may be used if shown by experience to be required
ISO 1940