Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Just install an AIS receiver and send us your data through any Internet connection.
Why cover my Area? Am I located in a proper area? What equipment and software do I need? Can I avoid using a computer? I am already using Shipplotter software. How can I contribute? I already have a wideband or a VHF receiver. Can I use it to collect AIS data? How to configure my AIS receiver and my software? I wish to share my data with other services as well Put a Live map of your area in your web site Watch the coverage and reception statistics of your station How much will it cost me? My ship already has an AIS transponder. Can I use it to collect and send AIS data? I do not have an AIS device, but I can report positions by other means How much Bandwidth will the AIS data feed consume? Need Help?
A typical base AIS station is shown on the picture above. Obtain an AIS receiver, connect it to your PC and to an external VHF antenna and send the collected data through your Internet connection. In detail: 1. You need an AIS receiver. You may buy one from a local marine electronics shop or you may order one from an online shop. In case you are located in an area which is not already covered by MarineTraffic we will be pelased to provide an AIS Receiver for free. The following devices (with serial and/or USB output) have been used by several contributors in our network of AIS stations and can be easily found in many online stores: COMAR SLR200 www.comarsystems.com, www.parissinos.gr EasyAIS www.easyais.com ACR Nauticast AIS receiver www.acrelectronics.com Smart Radio SR162 dual channel or SR161 single channel smartradio.diytrade.com MarineGadget Radar - single channel www.radargadgets.com Digital Yacht AIS receivers www.digitalyacht.co.uk NASA AIS engine www.nasamarine.com If you are not sure whether your location is suitable for AIS data reception and thus you do not want to buy a device, we can lend you an AIS receiver unit, to try it. You will have to return it to us within one month. 2. You need a VHF antenna. Any marine VHF antenna is suitable for AIS reception. A 5/8 type antenna seems to be better for a base station (see 1st picture). For a little better results you may get an high-gain VHF antenna (e.g. a 3 x 5/8 aerial) or an antenna specially designed for AIS, such as the "Shakespeare 396-1-AIS" or the DPDP AIS antenna. Install the antenna at the highest possible point of your building. If you feel you can build your own handcrafted antenna, then you have many better options. Since in most cases the sea is not located around us but towards one direction, it is a very good idea to construct a directional (Yagi) antenna pointing to the sea (see 2nd picture). You can calculate the length of the antenna elements at this site:http://www.k7mem.150m.com/Electronic_Notebook/antennas/yagi_vhf.html (Remember to enter frequency 162 MHz). You may also try a custom made "Collinear" AIS antenna.
: A 5/8 VHF Antenna : An array of two Yagi AIS antennas 3. You need a cable and the relevant connectors to connect the antenna with the receiver. The best choice for this cable is the RG-213 type. If the distance is shorter than 5 meters you may also use the cheaper RG-58 type. In any case, the length of the antenna cable must be kept as short as possible. You will also need a serial cable (a common RS-232 serial connection cable) to connect the AIS receiver with the computer. We have successfully tested a 15-meter serial cable, so we were able to place the receiver very close to the antenna, while the PC was 2 floors lower. 4. You need a software You need to download a simple software for processing and uploading data to the central database. We provide a simple windows-based service program that runs on the background or in the foreground if you wish to keep an eye on it. It requires the existence of the Microsoft .NET 2.0 framework (if you do not have it already, you will be prompted to download it during the software installation). Download the "AIS Logger" Software (zip file, about 0.3 MB) Installation Notes:Run the installation package AisServiceSetup.msi and follow the steps until the end. The software requires the Microsoft .NET framework, which will be downloaded during the installation if you do not already have it. A windows service will be installed (named AIS Logger). Locate the service in (Right click) My Computer --> Manage --> Services. Configure the service to start Automatically and start the service. If you wish to see the AIS data collected and processed, check the option 'Allow service to interact with the desktop' at the 'Log on' tab, before starting the service (if you do so, please note that the program will stop when you log-off from windows). In order to configure AISlogger (COM port used, destination IP and port, etc.), please locate the folder where the software is installed (normally C:\Program Files\DPSD\AisServiceSetup). Open the file named aisclient.exe.config with a text editor (notepad or wordpad). Locate the settings for comport, udpport1, etc. and change the values as necessary. Alternatively, you may use one of the following programs:
- AIS Dispatcher (Thanks to 'AIS Hub' - Just extract the contents of the 'zip' and run program. - linux version also available) - Shipplotter (requires registration fee) Thats all! Start seeing vessels in your area! Ask us to put in our our site a direct link to your area.
I already have a wideband or a VHF receiver. Can I use it to collect AIS data?
If you already have a wideband receiver or a marine VHF radiotelephone, it is possible to use it to collect AIS data and send them to the central server, without buying a specialized AIS receiver. You have to follow the steps below:
Tune your receiver at one of the frequencies 161,975 MHz or 162,025 MHz (with FM modulation) or if you operate a VHF radiotelephone, tune it at channel 87. If there is AIS signal reception, you will hear a noise repeated at very short periods.
Connect the discriminator output of your receiver to the input (line-in or microphone) of your computer (for more information on discriminator output of receivers see http://www.discriminator.nl).
Install the software AIS_Monitor in your computer from here: http://groups.yahoo.com/group/aismon/ Run the AISmon program, select the sound card of your PC and configure the UDP data output to 195.251.168.18:5351. See the ships you are receiving immediately on the real-time map!
converters are not able to send your data to multiple destinations, but we can do it for you. If you wish to forward your raw AIS data feed to one of your own systems or to share the data with other services, except MarineTraffic, we can forward your data to any requested destination. All we need is the destination IP address, port number and protocol (TCP or UDP).
our map that covers your area in your own web site. It is very easy to do this by inserting the following code line into the
You may
register your AIS station in the Stations List and thus reserve a unique ID for your data. Ship positions coming from your station will be distinguished by a unique ID (a number appearing next to the word 'Received()' within the info window of a ship).You will be then able to watch daily and long-term statistics on signal propagation, number of vessels received, as well as a coverage map. See an example here: Reception Statistics of Station No.2 Coverage map of Station No.2
If you decide to buy your own AIS receiver, price varies from EUR 150
to 500. You will have to spend no more than EUR 80 for the antenna and the cables. We assume also that you already have an Internet connection and a PC in case you are using an AIS receiver with serial interface (anything with windows 2000, XP, Vista, with more than 256MB of RAM would be fine). In many cases (e.g. uncovered areas, areas of special interest, installations on top of mountains, etc.) we will provide an AIS receiver free of charge. Get an AIS receiver for Free!
My ship already has an AIS transponder. Can I use it to collect and send AIS data? Yes, this is possible if your vessel has a satellite Internet connection. This would be a
very interesting idea as it would enable long-range coverage in every sea route of the world! AIS transponders already installed on most vessels can be used as mobile AIS receiving stations. These stations collect and export AIS information about the vessels own positions and about all the nearby ships. If your vessel has a satellite Internet connection onboard, then the collected signals can be easily sent to our central server, with no additional cost or equipment. It would be therefore possible to see vessels on the real-time map, not only near shores but anywhere in the world. For example, a ship crossing the Atlantic will be constantly transmitting its own positions and all positions of ships sailing around it (in a range of 30-40 n.miles) in every location, even where no shore reception is possible. Here are some basic instructions to implement the 'onboard' AIS data collection: 1. The prerequisite to implement this solution is a PC with an Internet connection onboard. 2. The program 'AIS Logger' must be installed in the PC, as described here. Alternatively, the 'AIS Dispatcher' program may be used, which has the possibility to reduce the bandwidth used. 3. The serial output of the AIS transponder of your vessel must be connected to the serial port of the PC. Since the cabling of the serial connection depends on the type of your AIS transponder, please refer to its installation manual for more information. Some examples: Proposed cabling for AIS transponders Furuno FA-100 and FA-150 Proposed cabling for AIS transponder Samyung SI30
I do not have an AIS device, but I can report positions by other means There may be other ways to collect the position of vessels, except AIS.
For example, a small vessel may have a GPS device, reporting positions to other devices on-board, using NMEA connection. A PC can collect this NMEA data through its serial port and send it to our server. Collection of data can be even off-line and transfer to the server will take place whenever a network is available.
You may use the mAIS application on your smart phone (iPhone/iPad or Android) on board to report the position of your vessel directly to MarineTraffic. A shipping company may use a proprietary system to follow its fleet. Even if the reporting is not in real-time but only sporadical, a vessel's last known position is still a valuable information. Publishing this information through MarineTraffic could be possible. We can collect and process ships positions by any automated method and in any format, including but not limited to: By a standardized email message sent to us, containing the vessel's position By accessing a web service on our server where the position information is entered By letting our service accessing your data By sending us a file containing a batch of previously recorded data, in text, csv, xls, xml, json or other formats By sending us the NMEA data feed of your boat, which may also include other valuable data, such as wind speed and direction, sea depth, water temperature, etc. There are at least 5 different methods for reporting your own position to MarineTraffic. Read more....
Need Help?
We can support you to build your AIS station. Do not hesitate to send us an email
at info@marinetraffic.com. You may also find an answer in the Frequently Asked Questions.
We are able to provide a number of AIS receivers for free to any interested individual or company, in order to further expand the coverage of MarineTraffic. In case you are interested and you fulfill some prerequisites, we will provide you a complete set of high quality equipment. You will have to install the receiver in your building and provide electricity and Internet connectivity. Please note the following requirements: Antenna: You must be able to install an external antenna at the roof of your building. The cable between the antenna and the receiver should preferably be less than 10 meters. Electricity: You must be able to provide electricity for the (very low consumption) equipment. Internet: You must have a 24hour connection to the Internet.
We will be collecting applications from any interested party. Although we will try to respond to all applications, we will give priority to the following cases:
The proposed location is not already covered by our system. The proposed location is of special interest, such as crowded port, high traffic ship route, canal, point at high altitude, etc. The applicant has some experience in similar technology and generally in radio equipment.
How to apply?
Please send us an email at info@marinetraffic.com expressing your interest to get a free AIS receiver. Please include the following information in your message:
Contact details (full name + email + phone number) Location (coordinates + elevation Above Sea Level) Type of your Internet connection Any other important installation details such as the estimated lengths of antenna cable and the network cable. In case a marine VHF antenna and cables are already available, that would make the shipment easier for us. Any experience you may have in similar activities/technology. Please include your callsign if you are a radio amateur.
Local Market
Sometimes it is more convenient to buy the equipment from your local market, in order to avoid expensive shipments and customs taxes. In case you are able to purchase the equipment from your local market, please let us know about the type of available devices and their prices. We may be able to sponsor the purchase.