Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Preferred Device
G S
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, Junction to Ambient Maximum Lead Temperature for Soldering Purposes, 1/16 from case for 10 seconds Symbol RqJA TL Max 357 300 Unit C/W C
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet.
*For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
Preferred devices are recommended choices for future use and best overall value.
2N7000
ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted)
Characteristic Symbol Min Max Unit
OFF CHARACTERISTICS
DrainSource Breakdown Voltage (VGS = 0, ID = 10 mAdc) Zero Gate Voltage Drain Current (VDS = 48 Vdc, VGS = 0) (VDS = 48 Vdc, VGS = 0, TJ = 125C) GateBody Leakage Current, Forward (VGSF = 15 Vdc, VDS = 0) V(BR)DSS IDSS IGSSF 1.0 1.0 10 60 Vdc
ON CHARACTERISTICS (Note 1)
Gate Threshold Voltage (VDS = VGS, ID = 1.0 mAdc) Static DrainSource OnResistance (VGS = 10 Vdc, ID = 0.5 Adc) (VGS = 4.5 Vdc, ID = 75 mAdc) DrainSource OnVoltage (VGS = 10 Vdc, ID = 0.5 Adc) (VGS = 4.5 Vdc, ID = 75 mAdc) OnState Drain Current (VGS = 4.5 Vdc, VDS = 10 Vdc) Forward Transconductance (VDS = 10 Vdc, ID = 200 mAdc) VGS(th) rDS(on) VDS(on) Id(on) gfs 75 100 2.5 0.45 mAdc mmhos 5.0 6.0 Vdc 0.8 3.0 Vdc Ohm
DYNAMIC CHARACTERISTICS
Input Capacitance Output Capacitance Reverse Transfer Capacitance ( (VDS = 25 V, VGS = 0, , , f = 1 0 MH ) 1.0 MHz) Ciss Coss Crss 60 25 5.0 pF
TurnOff Delay Time 1. Pulse Test: Pulse Width 300 ms, Duty Cycle 2.0%.
http://onsemi.com
2
2N7000
2.0 1.8 I D, DRAIN CURRENT (AMPS) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 VDS, DRAIN SOURCE VOLTAGE (VOLTS) TA = 25C I D, DRAIN CURRENT (AMPS) VGS = 10 V 9V 8V 7V 6V 5V 4V 3V 9.0 10 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 VGS, GATE SOURCE VOLTAGE (VOLTS) 9.0 10 0.8 0.6 0.4 0.2 1.0 VDS = 10 V 55 C 125C 25C
2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 60 20 +20 +60 T, TEMPERATURE (C) +100 +140 VGS = 10 V ID = 200 mA
2.4
1.2 1.05 1.1 1.10 1.0 0.95 0.9 0.85 0.8 0.75 0.7 60 20 +20 +60 T, TEMPERATURE (C) +100 +140 VDS = VGS ID = 1.0 mA
http://onsemi.com
3
2N7000
ORDERING INFORMATION
Device 2N7000 2N7000G 2N7000RLRA 2N7000RLRAG 2N7000RLRM 2N7000RLRMG 2N7000RLRP 2N7000RLRPG 2N7000ZL1 2N7000ZL1G Package TO92 TO92 (PbFree) TO92 TO92 (PbFree) TO92 TO92 (PbFree) TO92 TO92 (PbFree) TO92 TO92 (PbFree) Shipping 1000 Unit/Box 1000 Unit/Box 2000 Tape & Reel 2000 Tape & Reel 2000 Ammo Pack 2000 Ammo Pack 2000 Ammo Pack 2000 Ammo Pack 2000 Ammo Pack 2000 Ammo Pack
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
http://onsemi.com
4
2N7000
PACKAGE DIMENSIONS
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 0.250 0.080 0.105 0.100 0.115 0.135 MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 6.35 2.04 2.66 2.54 2.93 3.43
X X G H V
1
D J C SECTION XX N N
DIM A B C D G H J K L N P R V
http://onsemi.com
5
2N7000
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com
6
2N7000/D
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.