0 calificaciones0% encontró este documento útil (0 votos)
110 vistas44 páginas
Cross-sectional areas in the following tables are calculated from nominal dimensions, and include the nominal fillet radius employed by Steel Dynamics Inc. The tabulated values may slightly deviate from those published in ASTM A6 / A6M.
Cross-sectional areas in the following tables are calculated from nominal dimensions, and include the nominal fillet radius employed by Steel Dynamics Inc. The tabulated values may slightly deviate from those published in ASTM A6 / A6M.
Copyright:
Attribution Non-Commercial (BY-NC)
Formatos disponibles
Descargue como PDF, TXT o lea en línea desde Scribd
Cross-sectional areas in the following tables are calculated from nominal dimensions, and include the nominal fillet radius employed by Steel Dynamics Inc. The tabulated values may slightly deviate from those published in ASTM A6 / A6M.
Copyright:
Attribution Non-Commercial (BY-NC)
Formatos disponibles
Descargue como PDF, TXT o lea en línea desde Scribd
Available Products
Version 4c + August 2010
S Steel Dynamics, Inc:
Structural and Rail Division * Columbia City, IndianaSTRUECTUAAL‘Applicable to Shapes:
Shape Dimensions HP.M&w
Nomenclature & Permissible Variations
ti
acre
3 Units
2 | Common ro mn
& N dle Permissible Variations
5 jame ela
G &
A _| Cross-sectional Area in? _| mm* * Calculated from SDI shape — information only
by_| Flange Wiath in| mm ‘As per latest edition of ASTM ASIAGM
d__| Flange Depth in_|_ mm As per latest edition of ASTM AG/AGM
| = tne in| mm Detaiing denension = information only
kei = tine in| mm Detaiing dimension = information on
L [Leng Rin] om Length euting tolerance os pe exrent SD! price page
R__| Fillet Radius in | mm Mill practice — information only
T_| clear web in| mm Detaiing denension ~ information only
tr__| Flange Thickness in_| mm ‘As per latest edition of ASTM AS/AGM_
tw | Web Thickness in_ | mm As per latest edition of ASTM AG/AGM_
w__| Weight / Mass. ibs | kim ‘AS pe lest edon of ASTM ABIAGM
“*Denotes deviation from ASTM AG/AGM
The permissible dimensional variations of structural ong products manufactured by Stee! Dynamics Inc,
Structural and Rail Division, conform to the latest edition of ASTM AG/AGM. Cross-sectional areas in the
following tables are calculated from nominal dimensions, and include the nominal filet radius employed by Stee!
Dynamies Inc. Consequently, the tabulated values may slightly deviate from those published in ASTM AG/AGM.
Nominal detailing dimensions are provided as a courtesy. Permissible cimensional variations, and rolling
factors (such as roll wear), may result in supplied shapes differing from the tabulated values. Consequently,
allowances should be made for proper fiting and connections.
Piece length tolerance deviates from ASTM AB/A6M. Please consult the current price page for mill practice,
“Please note that Steel Dynamics, Inc. reserves the right to produce material in either the Heavy Section Mill
(HSM) or the Medium Section Mill (MSM),
| uu steeldynamies com
aon doe ag 340