0 calificaciones0% encontró este documento útil (0 votos)
49 vistas2 páginas
SPECIFICATION FOR INDUSTRIAL WASHING MACHINE Client: Ravin electro seals pvt limited, Pune Date: 20-04-2004 Name of the equipment Mechanism of cleaning Operations Principles of control centrifugal and revolving rotation of the job rotation of job by clamping of job Principles of clamping of job Loading direction 12) Filtration methods 13) Cleanser 14) heating method 15) 16) 17) 18) 19) 20) 21)
SPECIFICATION FOR INDUSTRIAL WASHING MACHINE Client: Ravin electro seals pvt limited, Pune Date: 20-04-2004 Name of the equipment Mechanism of cleaning Operations Principles of control centrifugal and revolving rotation of the job rotation of job by clamping of job Principles of clamping of job Loading direction 12) Filtration methods 13) Cleanser 14) heating method 15) 16) 17) 18) 19) 20) 21)
Copyright:
Attribution Non-Commercial (BY-NC)
Formatos disponibles
Descargue como PDF, TXT o lea en línea desde Scribd
SPECIFICATION FOR INDUSTRIAL WASHING MACHINE Client: Ravin electro seals pvt limited, Pune Date: 20-04-2004 Name of the equipment Mechanism of cleaning Operations Principles of control centrifugal and revolving rotation of the job rotation of job by clamping of job Principles of clamping of job Loading direction 12) Filtration methods 13) Cleanser 14) heating method 15) 16) 17) 18) 19) 20) 21)
Copyright:
Attribution Non-Commercial (BY-NC)
Formatos disponibles
Descargue como PDF, TXT o lea en línea desde Scribd
1) Name of the equipment Industrial washing machine
2) Mechanism of cleaning Centrifugal pumping and reciprocations pumping combination. 3) Operations Fully automatic with manual option 4) Principles of control PLC with relays and contactors 5) Centrifugal and revolving Frequency controller for revolving motors and centrifugal pumps. 6) Rotation of the job Yes 7) Rotation of job by Revolving motor 8) Clamping of job Manual 9) Principles of clamping of Fixtures with easy clamping design job 10) Loading Semi automatic 11) Loading direction With traction frame parallel to the ground 12) Filtration methods Through cartridges and sieve filters 13) Cleanser Hot water with additives 14) Heating method Electrical filament heating thro heat exchanger 15) Heat control Through temperature controller (PID) 16) Safety doors Yes 17) Safety door view glass yes 18) Door controls Pneumatics/motor control 19) Utility services Air/ Electricity/water supply 20) Electrical supply 440v AC 50Hz 3phase 21) Air quality 5Bar/dry/lubricated/filtered 22) Water quality DM Water 23) Water supply for Makeup water in reservoir on machine 24) Insulation quality PUF only to outer shell 25) Inner shell material of Stainless steel 314 contrt 26) Outer shell painting Heat resistance paint or powder coating 27) Temperature ranges of 50-80 Deg centigrade water 28) Drain provision Fitted 29) Make up water provision Fitted 30) Total cycle time Adjustable 31) Total cycle time per Maximum 10 minute product 32) Loading per shot Two components 33) Floor area 3500 mm X 2000 mm 34) Height of the equipment 1500mm from ground level maximum 35) Direction of rotation of About the axis axles 36) Speed of rotation of axles 10 – 30 Rpm maximum 37) Nozzles Made up of Stainless steel 38) Nozzles fitting Dismantling type 39) Grouting With bed bolt on the floor with concrete