0 calificaciones0% encontró este documento útil (0 votos)
44 vistas1 página
If you let the bolt slam forward with no barrel installed, the bolt bangs against the barrel extension and chips its rear threads. Armorers, if the extension threads are only chipped, the M2's likely still usable.
If you let the bolt slam forward with no barrel installed, the bolt bangs against the barrel extension and chips its rear threads. Armorers, if the extension threads are only chipped, the M2's likely still usable.
Copyright:
Attribution Non-Commercial (BY-NC)
Formatos disponibles
Descargue como PDF, TXT o lea en línea desde Scribd
If you let the bolt slam forward with no barrel installed, the bolt bangs against the barrel extension and chips its rear threads. Armorers, if the extension threads are only chipped, the M2's likely still usable.
Copyright:
Attribution Non-Commercial (BY-NC)
Formatos disponibles
Descargue como PDF, TXT o lea en línea desde Scribd
Let the Bolt Down Easy did I do OUCH! wrong? there go my barrel extension threads! I won't shoot long if you don't carefully align my ammo belt during loading.
Ease bolt forward when
Some gunners If you let the M2’s bolt slam for- barrel’s not installed twist the belt ward with no barrel installed, the during loading. That misaligns bolt bangs against the barrel the ammo links extension and chips its rear and makes me threads. That could ruin the quickly jam. extension. So never dry fire your M2 when the barrel’s not installed. Instead, ease the bolt forward.
Armorers, x Chips or cracks on the first thread on the
if the extension bolt end of the extension and at the barrel threads are end can be stoned smooth as long as the chip only chipped, the M2’s likely or crack doesn’t extend beyond the thread. still usable. x The remaining full threads cannot have Here are the more than one chip or crack. The crack or criteria… chip can’t extend beyond the thread and the Aligned Misaligned stoned area can’t be longer than 1⁄2 inch.
Have direct sup-
so, when you load the port file or stone the right! and if the belt correctly, the links links don't do chipped or cracked make a straight line that, realign the areas smooth. If the across the receiver ammo belt links. barrel can then be Check extension evenly and flush against threads for the ammo's copper band. easily screwed on, cracks or chips the M2 is OK to use.