HWV External Resistance Vacuum
Ny ON EME ene
Shanghai Huaming Power Equipment Co.,LtdQD EAA
MEE HWV External Resistance Vacuum
‘Multipoint contact of tap selector
Type On Load Tap Change:
Based on the successtul experience of SHZV vacuum on load
tap changer, HWV type external vacuum OLTC is developed by
Huaming with a separate tap selector and diverter switch. HWV
OLTC is applicable to power transformer or industrial transformer
with Delta or Star connection
The tap changer is with highest voltage of 40.5kV or 72.5kV,
‘maxim three phase current up to 100A.
Feature:
1. All the vacuum interrupters are mounted stationary instead of
‘moving during the switching, which ensures the reliability and life
span of the interrupters.
2. Tap changer long time load carrying is undertaken by mechanical
contacts, the vacuum interrupter only switches the current
momentarily, by which the load of the interrupter is significantly
reduced and as a consequence, the life span of the interrupter
is expanded
3. In the mechanical transmission section, the switching of the
/erter switch is of linear movement driven by an innovative
‘mechanism.
4, The tap selector contacts are of multi-point contact; greatly
enhance the load carrying capability. The pressing springs are
changed to spring reeds, which effectively shorten the length in
the axial direction
Explanation of model EE
ro
im
type!
Number of phase
Max rated through current(A)
connection
Highest voltage for equipment(kV)
ny
a
L___ asic connection af tap selector
Boas tw
LL change-cver selector
O:without change-over selector
‘wawith reversing change-over selector
Number of middle position:1 or 3
Number of operation position
Tap selector pitchHWV External Resistance Vacuum
Type On Load Tap Changer
Schematic diagram of diverter switch switching principle
HWVV uses single transit resistor forthe switching, Below is the switching sequence ofthe contact,
line in red represents the current path,
| Os
&;
Os
L
V2 Tons we come acne
Overall dimensions of HWVIII-1000/40.5 EE!
1082 62QE
HWV External Resistance Vacuum
Type On Load Tap Changer
Main Specifications of HWV
Series. No Model Hwvtti400 | HWviti60o| HWVIIT1000
1 Max. rated through current (A) 400 600 1000
2 Rated frequency (Hz) 50 or 60
Y-for neutral point of star connection
o Core D-for any selectable winding connection|
4 Max. rated step voltage (V) 2500
5 Max. rated step switching capacity (kVA) 1000 1500 1800
Thermal stability 8 2 20
| Shottekeuitcurent (sec. effective)
withstand (kA) Dynamic stability 20 30 50
(peak value)
7 Max number of operating postion With reversing change-over selector: 35,
Without change-over selector: 18
Highest voltage of equipment (kV) 405 725
Power frequency withstand voltage
3 Insulation iv (60 Hz min) 95 140
ean) Lightning impuise voltage
250 350
kv(1.2/50ys)
9 Mechanical ife ‘Not less than 1,500,000 operations
70 Contact ife Not less than 300,000 operations
‘Operating pressure 0.03Mpa
No leakage under 0.08Mpa
1" ol amnanad for 24 hours:
a (Over pressure protection Pressure release at 70+ 20% KPa
Protection relay Set at ol low speed 1.0mis = 10%
2 Equipped with motor drive unit ‘SHM-
Shanghai Huaming Power Equipment Co.,Ltd.
No. 877 Tongpu Road, Shanghal,P.R. China 200333)
Tel: +8621 92702715,
Fax: +86 215270 2715
‘Blipviwww Ruaming com
E-mail" export@huaming.com