GROVE
: IMU/d
80 TON CAPACITY
36 ft. - 146 ft. BOOM
(FULL POWER)
8x4 and 12x6 CARRIER
PCSA CLASS 12-365
RATED LIFTING CAPACITIES IN POUNDS
ON OUTRIGGERS FULLY EXTENDED OVER SIDE & REAR
210
(360° W/FIFTH FRONT OUTRIGGER JACK)
Radius Boom Length in Feet Be 200
in je 114't
Fe "36 [49 62 75. 88 101 14 | #146 | 198
12 |160,000]103,000 | 83,000 | 78,000 190
(65) (72) _| (76) (78.5) 185|
TS |f20,000]T00,000 81,000] 76,500] 63,000 |
(60) _| (68.5) | (73) _| (76) _| (79)
20 | 93,000] 90,000 | 79,000 | 68,000 | 59,400 | 54,000 [50,000 Ue
(50)_| (62) _| (68)_| (72)_| (75.5) |(77)_| (79.5) 170}
2] 72,500] 72,500 | 70,700 | 64,000] 54,000 | 52,200 | 43,200 | 30,000 test
(38.5) | (55) | (63)_| 68)_| (72)_| (74) _| 77.5) | (79.5) {
30 [58,000 58,000 | 50,000 | 44,100 | 43,200 | 36,000 | 27,950] 160,
23 tsk
150
ras}
149]
135|
10h
120} ——
# ris}
11,980 Aad
3) z Nt
Fa § 1051
< 100}
90 [ ss} +
TOO 3°
| ph
110 oo
7
120 i
rol
130 est
sob
140 st
1425 sot
4s}
NOTE: Boom angles are in dearees, "6-629.002687-002836A-0026898 ol
ast
LIFTING CAPACITY NOTES: aol
Capacities appearing above the bold line are based on structural strength and tipping should not
“Jo. not exceed 85% 01 tipping toads with ast
y fest in accordance with SAE 1-765.
. Capacities for the 36 ft Boom length snail be lifted with Boom fully retracted. If boom is not 20]
fully retracted, capacities shall not exceed those shown for the 49 ft. Boom length,
. Radiitess than’ $01 or meters not recommended when lifting over front of machine. is}
: Sapacities listed are’ with fully extended outriggers and front jack cylinder extended according to
proper procedure. tof
For'boom lengths less than 146 ft. & 32 ft. boom ext. erected, the rated loads are deter
boom angle only in the od by 146 Tt. boom. Fer boom angles not shown, |
of next lower boom ang ad column, the 32 ft. boom extension operational mo
fo be selected on the Krueger Lim, CAUTION: The Krueger LM Spply tor full
Boom extension only. ae estas
. Boom angie 1s the liicluded angle between horizontal and the fongitudinal axis of the boom base
Section after lifting rated toad.
A6-829-0028358 sxeHOOK ELEVATION IN FEET
RANGE DIAGRAM
asieot30 420- 110 10d 30 — 807060
OPERATING 3ADIUS FROM AXIS OF ROTATION IN FEET
sKc-762030
3045 40 35 30-25 2015
AXIS OF ROTATIONLIFTING CAPACITY NOTES
1. Do not exceed any rated lifting capacity. Rated lifting capacities are based on freely
Suspended loads with the machine leveled and standing on a firm supporting surface.
Ratings with outriggers are based on outriggers being extended to thelr maximum
position and fires raised free of crane weiaht before extending the Boom or Wing
2, Practical working loads for each particular job shall be established by the user
depending on operating condition to Include: the supporting surface, wind and other
fattors affecting stability, hazardous surroundings, experience of personnel, handling
OF load, ‘ete. No attempt must be made to movers load Horizontally on the ground in
Sny direction,
3, Operating radius is the horizontal distance from the axis of rotation before loading
forthe centerline of the vertical holst line or tackle with loads applied.
4. “On Rubber” iifting Gif permitted) depends on proper tire inflation, capacity and
condition. “On Rubber” loads may be transported at a maximum vehicle speed of
2:5 mifnr (4 Krn/nr) on a firm and level surface under conditions specified.
5. Jibs may be used for lifting crane service only. Jib capacities are based on structural
Strength of jib or main Boom and on main boom angi
6. Operation is not Intended or approved for any conditions outside of those shown
hereon. Handling ‘of personnal from the boom is not authorized except with
‘equipment furnished and installed by Grove Manufacturing Company.
7. For clamshell or concrete bucket operation, weight of bucket and load must not
exceed 80% of rated lifting capaci
8, Power-telescoping boom ‘sections must be extended equally at all times. Long
Eantilever' Booms can create a tipping condition when in extended and lowered
position.
9. The maximum toad which may be telescoped is limited by hydraulic pressure, boom
angie, boom lubrication, etc. It is safe to attempt to telescope any load within the
limits of rated lifting capacity chart.
10, With certain boom and holst tackle combinations, maximum capacities may not be
oblainable with standard cable lengths,
11, With certain boom and load combinations, raising of load with boom lift cylinders
may not be postible. Operational safety 1s not affected by this condition.
12, Redp oad mangling devices a minimum of 12 inches (30 em) below boom head when
lowering or extending boom.
13. 1f actual boom length and/or radius is between values listed, use lifting capacity for
he next longer rated length and/or radius.
14. Ail (oad handling devices and boom attachments are considered part of the load and
Ble allowances must be made for their combined weights.
tion of this equipment in excess of rating charts or disregard of the instructions
ous and volds the warranty and manufacturer's liability.
LIFTING AREA DIAGRAM
(6 pmoter ouraigaes.
Gata ourmiecenGROVE
JIB CAPACITIES
With Two Part Line Only
ON OUTRIGGERS FULLY EXTENDED OVER SIDE & REAR
(360° W/FIFTH FRONT OUTRIGGER JACK)
IM870
q
Toaded] aon WS CAPACITIES GOR Te CAPACITIES TET HIB CAPACITIES, Be We CAPACITIES
win PECOBFSEX [17 Greskr [30° OFFSET] ST OFFSET [7 OFFSET {S0" OFFSET] 5 OFFSET [17 OFFSEI]30T OFFSET] SOFFSEL [17 OFFSET | 30" OFFSE
Boom fac, | tons [aur [rove [ase [rom faer [tore [rer [oo fuer [ooo [eez [oo [eee [aoww fae [core leer Tuoe fac | cove
Angle ara] sare [te [are [ass [te [Rr [eet [ase fase [ase [beet [Rss | tote [Bsa [bate [Rss | ite [assy tte | ate, |
30 aa —[12,a00 [53] 7300] 40 —ra.e0]s3 [9.070 ee | 3900] 26.5 [9.380] 60 —fe.aza [77 —[s250|47 [7300 [62.5 [acs0[ es [2.080
77 505 ]z.250[59—[e.s60] 65 ]i1.e50] 505 [asso] 6as [asco] ss aseo]es [e.o10]a1 |3.010}e55 | eeeo[71.5 [e010 a9 | 1.85c
Seo soop sr —[11-s20 [eae | 6 s0u] ss —frogoo fee —[rs1o[7s asso} sas [e030] 725 [s.seofes [zgoolea [6.os0[er tssio[ 955 | 1a
TES] 55.5 [14.250] 625 [10.540] 70:5 [6.290] 61 —io.200] 717370} a0 —araof oes [7a70[79.5 [5.210 |s2_[2610] 73 s.s00 [es [3.260 f103 | 153
To [ez ]iz.s10| 70 | 3.860] 765 [e010] 69] 9.e0] 765] 5.900 [ers [s920] 735 [ese0le7 [aso fsa —[ase0[ers [aso [97 ]2oa0 [ios] 1.39
[ers tee—frozsop sso poles [e770] rss P asso [ss P6500 5: of ars [6500[sa [4.250 fros—|z.s00] 903 [4.a60 [ross] z.ca0]rra [125
[74] 8.470] a1} 7.s20}e7[osoulars[ osoferfeiao fos 3;s70f 89 _[s.s20for_[arao pias [2t70[sa [aco fins [2.s70fiz55[ 117¢
[ers ao] 7.020] wee] oso] 95 [5.370] 85 | 5.7707 Tos] S.teo] a7 — 2-500 [ross | 3se0 [8 Tos—f3.620 [118 {7.14030 Li oay
Go [ae _} 5.050] 92 [5.370] 9a fs.070 [oes | aoa hose] azzo frit | sz90foe sf 3.e90]16 [3.080 [iass irs 3.760 fizes [1.570
35] Se] a. oo[ Toe | 3.7a0 |io8 [3.20 ]Tor | s.rrofr1s [awa frat [eosin [zea frees [180 1251 260.
[so —poss] zea) 123] Pozo fries [asso] ap go] ese 1200,
apis Lassgre Duvoapiees [i350
* Reference Radius (Feet) refers to f
** Capacities at loaded main boom an
WARNING: The Krueg
monitor the jib.
determined by test in ace
extended boom and appropriate jib length.
JIB CAPACITY NOTES
based on structural strength of Jib and do not
exceed 85% of tipping loads with counterweight fully extended as
lance with SAE-765.
2. 46%, 60", 74° & BB" (14.0, 18.3, 22.6, & 26.
Used for two-part line lifting crane service onl
Rated load Is bared on loaded main boom angle.
Meter) Jibs may be
sige ana ‘rear
Since loss of st
Tae. (22.6.
Side and rear
working position, the
[360
ability wa
METER
360
working position, the boom angte must not be less i
vivant outrigger jack] ), 7
Secur causing a tino
Te WARNING: With 74°
com angie must not be iets
‘w/front outrigger lack), oF 68
ing condi
LMI will not compensate for reeving/rigging accessories on the main boom nose or auxiliary boom nose when programmed to
reeving/rigsing accessories from main Boom when using JID.
an 56° (over
over front,
(over front
No. LCETM875-1-F.P.-B5%
WARNING: Operation of this machine with heavier toads than the
capacities listed Is strictly prohibited. Machine tipping with every
Iib occurs rapidly and without advance warning.
Rated load is based on loaded main boom angle with reference to
horizontal, regardless of main boom length. (Ref. radius in feet
meters) 42 for fully extended 114 ft, (34,8m) boom length only.
The Krueger 1 M.t. system will glve an accurate radius indication
for this condition only.)
46 FT. "(14.0 METER) JIB WARNING: with 46° (14.07) ,jib in
Working position, te boom angle must not be less than 45° (over
Side-and ‘rear [360° w/front outrigger Jack}), or 6” (over front)
Since loss of stability will occur causing a tippinig condition.
Go FT. (18.3 METER) JIB WARNING: With 60" (18,3m) Jib in
nce loss of stability will occur causing a tippinig condition.
8a FT. (26.8 METER) dis WARNING: With 68" (26.8m),jiD in
Working position, the boom angle must not be less tyan 55° (over
Side and rear [360° w/front outrigger Jacki), or 67-5" (over front)
Since toss of stability will occur causing a tipping condition.
JIB ERECTION NOTES:
‘A. Maximum total length of main boom for purpose of erecting jib,
over rearior over side, below 30\ main Doom angte is:
"46: (14.0m) ‘10g Ft. (31.4 Meters
G0" {18:3m) Jib— 95 Ft (29.0 Meters)
5a: (22.8m) Jib— 86 Ft (26-2 Meters
88" (26.8m) Jib— 77 Ft, (23.8 Meters)
5. WARNING: Do not attempt to erect jibs over front of machine.
WEIGHT REDUCTION FOR LOAD HANDLING DEVICES
ores gene te15ips.| NOTE: All Load Handling
areas seme) fraaae ° ysaezies||SSumhcanecen™ | etn Gegtfte Yo" Tick Combine
= = 10 Ton Headache Ball 500 Ibs. equipment.
+t Reduction of main boom capacities
®
GROVE MANUFACTURING COMPANY
Division of Kise. Ine
Box 21, Shady Grove, Pennsylvania 17256
Phone: (717) 597-8121 Telex: 842308 Cable: GROVE MFG
Printed In U.S.A.
DATE: 681-15M
Distributed by:
«