Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Resumen de Perdida en La Ruta
Resumen de Perdida en La Ruta
PROGRAM ORGANIZATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
NETWORK MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SUMMARY MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
TERRAIN DATA MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ANTENNA HEIGHTS MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
MICROWAVE WORKSHEET MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
VHF - UHF WORKSHEET MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
MULTIPATH MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
REFLECTION MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
DIFFRACTION MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
AREA COVERAGE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PRINT PROFILE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
TERRAIN VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
SITE DATABASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
INTRA SYSTEM INTERFERENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ANTENNA and RADIO DATA FILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TERRAIN DATABASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
REPORTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
DOCUMENTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Page 1 of 14
Program Description
PROGRAM ORGANIZATION
The Pathloss program is a comprehensive path design tool for radio links operating in the frequency
range from 30 MHZ to 100 GHz. The program is organized into eight path design modules, an area signal
coverage module and a network module which integrates the radio paths and area coverage analysis.
Switching between modules is accomplished by selecting the module from the menu bar. The functions
and features of these modules are described in the following paragraphs.
NETWORK MODULE
The Network module provides a
geographic interface to the path
design modules simply by clicking
on the link between two sites. This
feature significantly reduces the
design effort on large projects. Intra
system interference calculations
are carried out in the Network
module.
56 30'
Peace River
15'
Pine Valley
Brownvale
56 0'
Fairview
Dawson Creek
45'
Toms Lake
p
Pro
os
ed
By
s
as
30'
Woking
Demmit
Data Integrity
Managing change is a difficult task 15'
on any project. As the design
proceeds, the network module
55 0'
121
30'
120
tracks all changes made to the site
names, coordinates and site
elevations and ensures data integrity throughout all data files.
Grande Prairie
Beaverlodge
30'
119
30'
118
30'
117
Layers
Both links and sites can be assigned different layers to selectively work on different routing options or
frequency bands.
Drawing Scaling
Scaling options are provided to produce a workable display for several sites or networks with several
thousand sites. Networks consisting of widely separated cities each with a high concentration of radio
links are handled using a combination of scaling and layers.
Importing Site Data
A project normally starts by entering a list of site names and coordinates. This can be carried out by
importing comma delimited files from a spreadsheet or any text file. Sites and links can also be imported
from the site database or by directly importing Pathloss data files.
Link Labels
Labels can be drawn on the link lines between sites in either a free form or using predefined
specifications which are updated from the individual pathloss data files. The predefined formats include
Page 2 of 14
Program Description
provides a central location for the entry of path data parameters. Path calculations are carried out
down to the receive signal level. The Worksheet module completes the propagation reliability
analysis. Some items such as the site names and call signs can only be entered in this module.
Other entries, such as antenna heights, can be changed in any design module in the program.
provides the interface to the Pathloss site database for data entry and interference analysis.
sets the application type as either microwave (point to point or point to multipoint) or VHF-UHF.
The design has been optimized for manual data entry and editing. Single structures (trees, buildings or
water towers) or ranges of structures can be added to the profile.
Page 3 of 14
Program Description
Special Features
Grid coordinate systems
Site coordinates can be entered as latitude and longitudes or in any of the grid coordinate formats listed
below. Entry in either latitude-longitude format or grid format will automatically be converted to the other
format.
UTM (Universal Transverse Mercator)
South African Gauss conformal
UK Ordinance grid
Gauss Kruger (soon)
Terrain profiles taken from topographic maps usually show flat top hills and valleys. These can be
automatically enhanced by a specified percentage of the contour interval.
The profile can be stretched or shrunk to match the distance calculated from the coordinates.
Redundant points can be stripped from a terrain profile
Survey Angles
Vertical angles from either site to any point on the profile can be calculated considering the instrument
height and the value of K for light. The measured angle can be entered to shown the correction required to
the elevation at the selected point.
ANTENNA HEIGHTS MODULE
This module determines the antenna heights
which satisfy a clearance criteria specified as an
earth radius factor (K), a percentage of the first
Fresnel zone radius and an optional fixed height.
Two separate clearance criteria can be specified
for both main and diversity antennas.
750
700
650
600
550
500
450
Special Features
Structures
The location of the critical points may not be
400
350
300
0
10
15
20
25
30
35
40
45
51.9
Page 4 of 14
Program Description
evident when the profile was created in the Terrain Data module. A structure can be added, edited or even
moved directly in the Antenna Heights module.
Calculating clearance on an existing path
The clearance criteria on an existing path can be determined interactively by entering a value of K or a
percent of the first Fresnel zone radius. The other parameter will be calculated over the entire path.
Clearance display
The clearance can be displayed at any point detailing the contributions of the controlling clearance criteria.
Clearance and Orientation Reports
These reports show all points which are within a specified tolerance of the clearance criteria. The
azimuthal and vertical angles are given along with the variation of the vertical angle for a range of values of
K.
Antenna height tradeoff reports
The antenna height at one site is varied in fixed increments and the corresponding antenna height at the
other site is reported.
MICROWAVE WORKSHEET MODULE
A complete transmission analysis is carried out in the Microwave Worksheet module. The data entry
forms are accessed by clicking on an equipment icon. The worksheet is calculated and the results are
displayed as the data entry proceeds.
Reliability Methods
Multipath propagation reliability can be calculated using any of the following methods:
Vigants - Barnett factor, climatic factor and terrain roughness). Terrain roughness is calculated
over any segment of the profile reference to sea level or to a least squares fit of the terrain.
ITU-R P.530-6 (path inclination, grazing angle and geoclimatic factor). The grazing angle is
calculated by defining the dominant reflective plane on the profile)
ITU-R P.530-7 (path inclination and geoclimatic factor)
KQ factor
KQ factor including terrain roughness. The frequency and distance exponents can be set for
specific regional standards.
Propagation reliability can be expressed as availability or unavailability using the following conventions.
Total time below level for the worst month and annual basis.
Worst month unavailability and severely errored seconds (SES) using the criteria that fades which
last longer than 10 consecutive seconds are considered as system unavailability. The remaining
time below level is considered as SES.
Page 5 of 14
Program Description
The following diversity improvement calculations are provided for baseband switching and IF combining
systems.
Space diversity
Angle diversity
Hybrid diversity - a frequency diversity system equipped with space diversity at one end.
Rain Attenuation
Outage due to high intensity rain can be calculated using the Crane or ITU-R p.530 methods using any of
the following rain statistics files:
Crane rain regions
Page 6 of 14
Program Description
MULTIPATH MODULE
950
900
850
800
750
700
650
600
550
0
5
10
15
20
25
30
36.3
Variable Gradient
The user defines the refractivity gradient or K as
a function of height. The display uses a flat earth representation and the rays are drawn as curved lines.
Profile Formats
An instructional display which illustrates the concept of the effective earth radius is available in the
multipath module. Profiles can be displayed in virtually any format.
REFLECTION MODULE
The Reflection module analyzes the variation in receive signal level on paths whose geometry can support
a specular reflection. The receive signal is calculated as a function of any of the following variables:
Site 2 antenna height
Site 1 antenna height
H1=79.2 m, H2=54.0 m, F=5882.5 MHz, V
Frequency
Earth radius factor
(K)
4
Tide level
2
0
-2
-4
-6
-8
-10
-12
1.00
40
45
1.33
2.00
50
55
60
65
70
75
Earth Radius Factor - arctan(K) ()
5.00
80
10.00
85 89.4
Page 7 of 14
Program Description
discriminations are automatically factored into the results using the 3 dB beamwidths.
A dispersion worksheet shows a breakdown of the relative amplitude and delay of the reflected signal.
Any of the parameters (frequency, antenna heights, K, beamwidths.. ) can be changed to determine the
corresponding change in the reflected signal amplitude.
DIFFRACTION MODULE
100
Diffraction Algorithms
A diffraction loss calculation first characterizes
the terrain using the following categories:
90
80
70
60
50
60%
40
60
30
60
20
10
0
-10
0
5
10
15
20
25
30
35
40
Three automatic diffraction algorithms are
provided:
Pathloss
a user configurable algorithm
Each of these algorithms follow a set of rules to characterize the terrain and are the basis of variable
parameter calculations, area coverage and interference analysis.
48.3
On line of sight paths with less than 60% first Fresnel zone , the loss is determined using the following
methods:
a series of isolated obstacles defined by the 60% Fresnel zone intersections with the terrain .
Longley-Rice
Longley-Reasoner
Page 8 of 14
Program Description
49 24'
20'
16'
Fraser Junction
12'
8'
4'
49 0'
123 12'
8'
4'
123
56'
52'
48'
44'
40'
122 36'
The displays are presented as color coded radial lines or a solid color coded display. Both line of sight
and signal level displays are available in either format.
Page 9 of 14
Program Description
earth. The Fresnel zones are displayed on the rays between the antennas. Four different values of
K and Fresnel zone references can be displayed.
curved earth displays with either straight or curved horizontal axis are available using a single
value of K with four Fresnel zone references.
On space diversity applications, different the Fresnel zone references can be specified for the main and
diversity antenna combinations.
Title Block
A optional title block can be included for project specific information.
TERRAIN VIEW
A three dimensional terrain view is available in
the Terrain Data and Network modules. In the
Network module, the user simply defines a
rectangular area on the screen to display the
terrain. New sites can be added in the terrain
view. The implementation is based on the Sun
Microsystems OPENGL libraries supplied with
Windows 95/98 and Windows NT.
SITE DATABASE
All options of the program include an interface in
the Summary and Network modules to a site
database. Any number of site databases can be
created. The examples section of the CD-ROM
includes the complete microwave data base for
Canada.
The database consists of the following Borland Paradox tables:
owners and operators
site records
link records
station records
Page 10 of 14
Program Description
The table design has been optimized for interference calculations using the current pathloss data file
against a site data base. The analysis is identical to the intra system interference analysis described in
the following paragraph.
Due to the relationship between tables, it is not possible to simply transfer data from existing databases
into the Pathloss site database. Contact CTE for additional information.
INTRA SYSTEM INTERFERENCE
Interference calculations carry the analysis down to the composite threshold degradation of the victim
receivers due to multiple interferers. In conjunction with the Microwave Worksheet you can see the effect of
the interference on outage times. Antenna data files are used to determine antenna discriminations. The
radio data files are used to calculate the filter improvement (interference reduction factor). If threshold to
interference (T-I) or interference reduction factor curves, are available for the victim - interferer
combination, these will be used. Otherwise, the transmit spectrum of the interferer will be convoluted
against the receive selectivity. If these are not available, default masks will be used.
The Network module is used to calculate intra system interference. The calculation is made only for the
sites and links on visible layers.
Case Detail Report
This report shows a complete analysis for each interference case. All of the cases for each receiver are
summarized and the composite threshold degradation is calculated. If an interference case is a OHLOSS
candidate, the calculation can be carried out directly and the results are incorporated into the report. The
radio and antenna data files used in the calculation can be displayed.
Summary and Cross Reference Reports
Two versions of a summary report are available. The cross reference report is indented as a navigation
aid to the more comprehensive case detail report.
High-Low Violation Report
This report itemizes the frequencies used at each site and identifies any high-low violations in the
frequency plan. The channel ID naming convention is used as the criteria for violation.
ANTENNA and RADIO DATA FILES
Microwave Antenna Data Files
A microwave interference analysis requires horizontal radiation pattern envelopes for the four polarization
combinations (HH, VV, HV and VH). The same information is required for point to multipoint applications
where the base antenna has a fixed orientation. This data is contained in separate antenna data files one
for each antenna model. These files start as ASCII files following a standard format used by most antenna
manufacturers and converted to a binary format inside the Pathloss program. The file contains the basic
antenna specifications and the radiation pattern envelopes and can also include vertical radiation pattern
Page 11 of 14
Program Description
data.
At present, the program includes ASCII and binary antenna files for approximately 3500 microwave
antenna models.
Microwave Radio Data Files
In order to calculate the degradation of a digital receiver threshold in the presence of interfering signals of
any bandwidth and modulation, the following parameters are required:
Interference reduction factor versus frequency for a like modulation and capacity interferer.
Interference reduction factor versus frequency for interferers with different modulation and
capacities
The above data and other general specifications is contained in radio data files. These files start as ASCII
files and are converted to a binary format inside the Pathloss program. The binary file conversion will
create default transmit spectrum and receive selectivity masks which will be used to determine the filter
improvement if the required curves are not available.
At present, the program includes ASCII and binary radio data files for approximately 120 digital radio
models from major manufacturers.
Threshold-to-Interference (T-I) Ratio Definition
The T-I ratio is defined as the ratio of to the desired to the undesired signal power that degrades the
digital receiver 10-6 BER threshold by 1 dB. The advantages of T-I are that the difference in thresholds,
due to bit rate, modulation technique, and noise figure, are all taken into account.
Measurement of T-I for a digital radio is accomplished by fading the receiver to the 10-6 BER threshold
point. The signal level is then increased by 1 dB and interference is injected until a BER of 10-6 is again
achieved on the link. The ratio of the initial power level of the desired received signal to the interference
power is the T-I ratio. Note that this value will be different for different interferers, especially if the
interfering signal is offset in frequency from and/or has a wider spectrum than, the victim receivers
bandwidth.
VHF-UHF Antenna Data Files
Page 12 of 14
Program Description
Vertical and horizontal radiation patterns are required in an receive signal area coverage analysis and in
a point to multipoint application where the base station antenna has a fixed orientation. This data is
contained in separate VHF-UHF antenna data files one for each antenna model. These files start as ASCII
files following the format proposed by the NSMA and are converted to a binary format inside the Pathloss
program. The file contains the basic antenna specifications and the horizontal and vertical radiation
pattern. Unlike the microwave antenna patterns which are envelope patterns, the patterns for the VHFUHF antennas are typical patterns.
The program includes approximately 1500 VHF-UHF antenna data files for several manufacturers in the
frequency range 50 to 2500 MHZ.
TERRAIN DATABASES
A terrain database is required for area coverage analysis, OHLOSS calculations in interference analysis
and the terrain view feature. Single path profiles can also be generated from a terrain data base
Primary and Secondary Databases
The Pathloss program supports a primary and secondary database. This allows a high resolution
database with partial coverage to be supplemented with a second database of lower resolution, but
complete coverage. An example of this situation is the USGS 1 degree and 7.5 minute digital elevation
models in the United States. The 1 degree DEM has a resolution of 3 arc seconds for latitudes less than
50E and has complete coverage. The 7.5 minute DEM has a 30 meter resolution. The coverage of the
latter is not complete. One could specify the 7.5 minute DEM as the primary database and the 1 degree
DEM as the secondary. A terrain profile would be generated from the 7.5 minute data, where it is
available, and default to the 1 degree data if the required files are not available. The program creates a
report on the primary and secondary file usage over the profile.
Datum - Coordinate Transformation
If a database is based on the WGS84 datum, the users geographic coordinates will be automatically
transformed to this datum for all database operations.
Supported Terrain Database Formats
The following terrain data base formats are currently supported.
Page 13 of 14
Program Description
MSI Planet
DGM - Germany
Pathloss Terrain Data (soon - no charge upgrade)
Both the USGS 1:250,000 3 arc second DEMS and the GTOPO30 global 30 arc second terrain data are
available at no charge from the USGS web site.
As a convenience to Pathloss users, the program ships with USGS GTOPO30 data for the world (except
for the Antarctic region). The header and elevation data files are supplied in the native USGS format on
two CD-ROMS.
For Pathloss users in the United States, the program ships with compressed 3 second terrain data for the
United States and Alaska on a single CD-ROM. This data has been taken directly from the USGS
1:250,000 DEMS. The Pathloss program reads the compressed data directly.
REPORTS
All modules include a report selection with a print preview showing the pagination and can include your
company logo. The reports can be printed or copied as formatted text into your word processor. All of the
profile screen displays can also be copied to create custom reports. Reports can be save in either RTF
(Rich text format) or as ASCII text files.
LANGUAGE
All documentation and help files are in the English Language. The program and all reports can be
switched between English, French, Spanish or a user translation. All text used in the program is located in
external ASCII files and can be edited by the user.
DOCUMENTATION
Complete documentation is supplied which describes the operation of the program and the underlying
theory. All formulas and references used in the program are given.
The documentation is not intended as a primer for radio path design.
Page 14 of 14