Sizes 6-5/8 to 192 inches in diameter. From 3/16 to 2 inches thick. Tolerances comply with ASME EG 32 (d). I.D. or O.D. * Volume (US gal) V = .000586 D3 ( D = ID in inches )
ASME Flanged & Dished Tank Heads
Standard and intermediate sizes 14 to 250 inches. From 3/16 to 13/8 inches thick. Tolerances comply with ASME requirements. ASME UG-32 (e) I.D. or O.D. * Volume (US gal) V=.000346 D3 ( D = ID in inches. )
ASME 80-10 Flanged & Dished Tank Heads
Sizes 14 to 240 inches in diameter. From 3/16 to 1-3/8 inches thick. Tolerances comply with ASME 1-4 (d). I.D. or O.D. * Volume (US gal) V=.000488 D3 ( D = ID in inches. )
ASME High Crown Flanged & Dished Tank Heads
Standard and intermediate sizes between 14 to 248 inches in diameter. From 3/16 to 1-3/8 inches thick. Tolerances comply with ASME requirements. I.D. or O.D.
Flanged & Conical Dished Tank Head
From 24 to 240 inches in diameter. From 3/16 to 1-1/8 inches thick. Tolerances comply with ASME requirements. ASME UG-32 (h). I.D. or O.D.
Sizes 14 to 260 inches in diameter. From 12 gauge to 1-3/8 inches thick. Non-ASME I.D. or O.D. * Volume (US gal) V=.000263 D3 ( D = ID in inches )
Flanges & Shallow Dished Tank Heads
From 14 to 260 inches in diameter. From 3/16 to 1-3/8 inches thick. Non-ASME I.D. or O.D.
Flanged Only Tank Heads
Sizes 14 to 300 inches in diameter. From 12 gauge to 1-1/4 inches thick. Non-ASME I.D. or O.D.
Dished Only Tank Heads
When ordering, specify most important dimensions- outer diameter, crown radius, or depth. Standard and intermediate sizes 12 to 275 inches in diameter can be readily supplies. From 12 gauge to 3 inches thick. * Volume (US gal) V=.000233 D3 ( D = ID in inches ) ( DR = ID )
Flared & Dished Tank Heads
From 18 to 144 inches in diameter. From 12 gauge to 5/16 inches thick. Tolerances comply with ASME requirements. ASME 1-6. * Volume (US gal) V=.000233 D3 ( D = ID in inches ) ( DR = ID )