Allegro Design Workbench Installation Allegro Design Entry CIS Installation Procedure Design Entry HDL Extract Cadence_Starter_Library.zip file onto your C: or D: Drive it will automatically create a folder called 'Cadence_Starter_Library' 1, Create a new Desing Project with Allegro Project Manager 2, Once created click on the SETUP radio button 3, Click EDIT next to the CDS.LIB Add the additional new line below: INCLUDE C:/Cadence_Starter_Library/DesignEntryHDL/DEHDL_Library/cds.lib 4, Close the cds.lib text file click APPLY 5, Add All Available Libraries to your Project Libraries area 6, Click OK 7, Create an Allegro ENV file in your $HOME\pcbenv folder with the following entries: source $TELENV ### User Preferences section ### This section is computer generated. ### Please do not modify to the end of the file. ### Place your hand edits above this section. ### set psmpath = $psmpath C:\Cadence_Starter_Library\DesignEntryHDL\Allegro_Symbols\flashes\ C:\Cadence_Starter_Library\DesignEntryHDL\Allegro_Symbols\footprints\ set padpath = $padpath C:\Cadence_Starter_Library\DesignEntryHDL\Allegro_Symbols\padstacks\ Installation Procedure Allegro Design Workbench Extract Cadence_Starter_Library.zip file onto your C: or D: Drive it will automatically create a folder called 'Cadence_Starter_Library' ADW_Library_Import setup procedure is documented in: Cadence_Starter_Library\Documentation "ADW Starter Library Import Guide.doc" Installation Procedure Design Entry CIS Extract Cadence_Starter_Library.zip file onto your C: or D: Drive it will automatically create a folder called 'Cadence_Starter_Library'
Design Entry CIS setup procedure is documented in:
Cadence_Starter_Library\Documentation "DesignEntryCIS_Setup Readme.doc" In this document change <Starter_Library> to the path to where you extracted the zip file Example: * Note we assume you installed the Cadence Starter Library ZIP file into the C: drive. DIR0=<Starter_Library>\datasheets DIR0=C:\Cadence_Starter_Library\DesignEntryCIS\Datasheets Create an Allegro ENV file in your $HOME\pcbenv folder with the following entries: source $TELENV ### User Preferences section ### This section is computer generated. ### Please do not modify to the end of the file. ### Place your hand edits above this section. ### set psmpath = $psmpath C:\Cadence_Starter_Library\DesignEntryCIS\PCB_Symbols\flashes\ C:\Cadence_Starter_Library\DesignEntryCIS\PCB_Symbols\footprints\ set padpath = $padpath C:\Cadence_Starter_Library\DesignEntryCIS\PCB_Symbols\padstacks\