Está en la página 1de 1

VA Setup - Step by Step Guide

1.
2.
3.
4.
5.
6.
7.
8.
9.

10.
11.
12.
13.
14.
15.

Ensure the VB7 is turned on and connected to the computer with the USB cable
Ensure the Purple Dongle is plugged into the computer and is glowing red
Start Accent
Left-Click Open at the top of the screen
Select Change
Select Browse
Select Andrews Test Database and left-click open
Select Andrews Test Database and left-click OK
Ensure there is a folder for the customer. (If a folder exists go to step 10)
a. If there is no folder for the customer, Right-Click anywhere in the folders list
and select New -> VB Datafolder.
b. Name the folder after the customer, and select OK
c. Left-Click Open at the top of the page
d. Select Andrews Test Database and left-click OK
Take note of the RPM of the motor to be tested.
Double-Left-Click the Regular Motor Templates folder to see the options for
motor templates
Right-Click the template with the right RPM and select Copy to Clipboard
Right-Click on your customer folder and select Paste
Right-Click on your newly created motor and select Edit
Re-name the motor according the following pattern:

Job # - Horsepower & Make Serial Number (Ex. 487435 200HP WEG 068045)
16.
17.
18.
19.
20.
21.
22.
23.
24.

Left-click the Route button (green S-shaped picture lower left of screen)
Select Yes when asked to add all measurement points
Give the route a name (any name will do) and click OK
Left-Click Send at the top left of the screen
Select the instrument with the green lightning symbol next to it (If there is none,
check that the VB7 is on and the USB cable is properly connected)
Left-Click on the check-box next to the Folder you want to send and select OK
Confirm by clicking OK when the file is sent
Go and take the readings
To repeat readings exit the route and re-enter. Select Re-start if prompted.

25.
26.
27.
28.
29.
30.

When the readings are finished, re-connect the VB7 to the computer
Left-click Receive at the top left of the screen.
Select the instrument with the green lightning symbol next to it
Left-Click on the check-box next to the Folder you want to receive and select OK
Wait for the data to download and confirm by clicking OK when it is finished
Review the Data and PASS or FAIL the motor.

Note: If you have trouble, try the following


1. Reset your computer.
2. Reset the VB7 (press #5 and the power button at the same time)

También podría gustarte