FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra”
8000 Series
BATTERY PACK REMOVAL RELEASE LEVER REMOVAL
_Battety Pack
ae
Release lever
Turn the computer upside down as shown.
Slide the battery release lever in the direction of the 4. Remove the release lever in the direction of the arrow.
arrow,
3. Pullthe battery pack slightly forward and lit
it out
OPTIONAL PCMCIA CARD REMOVAL SELECTABLE BAY REMOVAL
| Lin \
Release
lever
Selectable
Z
Eject futton bay modu
i Selectable!
PC card bay lock
4, Pull out the eect button of the PC card to be removed. 1. Turn the computer up side down,
2. Press the eject button to pop the PC card out. 2. Push the Selectable bay lock to unlock position
4. Grasp the PC card and remove it. 3. Slide the release lever in the direction of the arrow.
4. Pull out the Selectable bay module in the direction,
of the arrow.
TOSHIBA
Tough Enough for Todav’s World.FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra”
8000 Series
FDD DISASSEMBLY Lower shield cover
Moxa
silver
ti
vl
Release lever Flexible cable cover Upper frame
1. Push both release levers and take the FDD out 2. Remove five M2x4 silver screws and one M2x6 silver
screw
3. Remove lower shield cover and the flexible cable
4. Lift the FDD out from the upper frame.
Brackets es
CD-ROM DRIVE DISASSEMBLY
M25 x2 2.532
Flathead brass Black connector Flexible Flat haad
screws cover cable Brass screws
5, Remove black connector cover and disconnect the Selectable bay cover CD-ROM
flexible cable from the FDD.
6. Remove fourM2.5 flat head brass screws and detach
‘he tao brackate |. Remove the Selectable bay cover.
NOTE: The brackets, flexible cable, black connector cover
and the flathead screws are all separste parts.
Please DO NOT retuin them to TOSHIBA,
TOSHIBA
ah Enough for Today's World.FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra”
8000 Series
CD-ROM DRIVE DISASSEMBLY
EXPANSION MEMORY REMOVAL
Memory
cover
Connector
Spacer
M2x3
black
Screws
Memory
2x8 silver Connector cover M2x3 black Expansion
Seems scene 4, Tuin the computer upside down, me
2. Remove four M233 black screws and the frame. 2. Remove three M2x3 black screws and remove the
3. Remove two M238 silver screws. memory cover.
4, Remove the spacer, connector, and the connector 3. Push the memory clips outward and pull the expansion
cover from the CD-ROM drive.
memory out of the connector ona 45 degree angle
HDD REMOVAL
M2.5x2.6 black screw White vinyl grip V HDD pack
1. Turn the computer upside down,
2. Remove one M2.5x2.6 black screw.
3. Push the cover by the dotted latches untilit clicks
4. Remave theHDD slot cover by sliding tin the direction
TOSHIBA
Tough Enough for Today's World.
love the HDD pack by pulling on the white vinylFIELD REPLACEABLE UNIT DOCUMENTATION
Tecra”
8000 Series
HDD REMOVAL
Top
MBxd flat hBad brass screws
1, Place the HDD on a flat surface and remove four
M3xt flat head brass screws
2. Remove the top cover.
KEYBOARD REMOVAL
12.5, brass Keyboctd holder
serow Keyboard
Keyboard retainer
Open the display panel
Unlaich the Keyboard holder at the four points
and remove it
3. Remove one M2.5x4 brass screwand remove the
keyboard retainer.
cover
HDD
Connector
Max4 flat head brass screws HOD bracket
3. Romove two M3xd flat head brass screws securing
the HDD and take the HDD bracket out
4, Remove the HDD connector
NOTE: The HOD connector, top cover, screws and the
bracket are all separate parts. Please DO NOT
return them to TOSHIBA
KEYBOARD REMOVAL
e yboard
connector
4. Lift the Keyboard out and lay it on the
palm rest. 8 carsful nct to apply pressure on the
keyboard cable.
Disconnect the Keyboard cable from PJ550 on the
system board and remove the Keyboard
TOSHIBA
Tough Enough for Today’s World.FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra”
8000 Series
TOP COVER REMOVAL
2.56 Disp!
ND.5xd: black ‘splay
black screws assembly
screws
2.504
black Connector
screws PuS70
LED
cable
2.5 x4 black screws, Nes ‘ae tad Naot 25x18
brass screws
1 Turn the computer upside down and remove the following 3, Remove four M2.5x18 brass screws and one M2.5x4
screws: brass screw.
3 M2.5x4 black screws from the battery slot 4, Disconnect the LED cable from PJ570 on the system
2 M2.5x6 black screws from the battery slot board
-2 MZ.5x4 black screws from the selectable bay 5. Release nine latches securing the top cover and the
-2 M2.5x6 black screws from the selectable bay display assembly: two latches on the left side four
3 M2.5x4 black screws from the back of the computer, on the front and three latches on the tight side
2. Turn the computer right side up and open the display. 6. Lift up tho top eever.
RTC AND BACKUP BATTERY REMOVAL, MODEM BOARD REMOVAL
Backup
battery
cable
M2.5X4
Brass
screws
~ Connector
cover
RTC battery Backup battery
Open the display panel
2. Remove two MZ.5x4 brass screws and the connector
1. Open the RTC and _backup battery cover cover
2. Disconnect the RTC battery cable from PJ500. 3. Release the two latches holding the modem cover in
3. Disconnect the backup battery cable fiom PJ910. the direction of the arrow
4. Lift out the RTC and backup battery. 4, Remove one M2.5x4 screws securing the modem board.
5, Pullthe modem board out of the connector
TOSHIBA
Tough Enouch for Today's World.FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra”
8000 Series
CONNECTOR BOARD REMOVAL
HEAT SINK REMOVAL
Remove three M2.5x4 brass screws.
Remove two cable clamps in the direction of the arrow.
Remove one M2.5x4. brass screwholcing the
connector board,
Disconnect the Connector board,
HEAT SINK REMOVAL
LCD module FLinvetter cable Modem board tray
holder assembly
2. Turn the computer right side up, remove one M25x6
brass screw securing L-shaped holder assembly and
lit the holder in the direction ofthe arrow.
3. Disconnect the following cables from the system board
-FL inverter board cable fom PJ191
-LED module cable from PJ190
4, Remove one M2.5x6 screw holding the modem board tray,
5. Remove modem board tray in the direction of the arrow.
|. Turn the computer upside down and remove three
M2.5 x6 black screws
M2xi2 bigss screws —-N2.5x6 brass screws
Heat sink
6. Remove the following screws
-2 M2.5x4 brass screws
-2 M2xt brass screws
-3 M2.5x6 brass screws
-3 m2x12 brass scrows
7. Lifithe heat sink out in the direction
of the arrow.
TOSHIBA
Tough Enough for Today’s World.FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra”
8000 Series
FAN REMOVAL. CPU BOARD REMOVAL
41, Disconnect the fan cable from the system board.
2. Remove the fan in the direction of the arrow |. Remove the CPU board out of the system board
NOTE: The cooling fan is a separate part. Please DO NOT
return the FAN to TOSHIBA.
SYSTEM BOARD REMOVAL
E a
System board
screws
PC slot
cover
FDD
Connector cover
3. Remove two M2.5x6 black screws securing
12.596 Black screws
1 Turn the computer upside down and remove three PC card slot cover and Ift out the cover
N2.5x6 black screws. 4, Remove the M2.5x6 brass screw securing the system
2. Turn the computer right side up. board
5. Remove three hex screws securing the insulator and
system board
6. Lift out the front end of the system board in the
direction of the arrow.
TOSHIBA
Tough Enough for Today’s World.FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra”
8000 Series
SYSTEM BOARD REMOVAL
Hinge caver assy, M2.8x4 black scrows
7. Remove three M2.5x4 black screws and remove
the hinge cover assembly.
NOTE: The hinge cover assembly isa separste part
Please DO NOT return this part to TOSHIBA.
SPEAKERS REMOVAL
Speaker
holder
oft
speaker
MXSxd screws
1. Turn the top cover upside down
2 Disconnect the speaker cables from PJ60
3 Remove two M2.5xd brass screws securing the
speaker holder.
3. Remove the speaker holders.
4 Lift out the speakers.
MEMBRANE SWITCH REMOVAL
Nu
460 Mombrano switch
1. Turn the top cover upside dawn
2. Disconnect the membrane switch cable from P50
3. Remove one MZ.5x4 brass screw securing
membrane switch,
4, Lift out the membrane switch from the top caver
LED BOARD REMOVAL
LED board M2.5xd brass screw
1. Tum the top cover upside down
2. Remove one MZ.5x4 screw securing LED board.
3 Lift out the LED board
TOSHIBA
Tough Enouch for Today's World.FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra”
8000 Series
12.1 TFT DISPLAY MASK REMOVAL _FL INVERTER AND 12.1TFT LCD REMOVAL
M25x6 brass screws wy cable
locatons
L inverter
board
Display
2x5
brass
screw
FLinvéter cable
1. Remove two plastic seals at the hottom comers of the ‘1 Remove one M2x5 brass screw securing FL inverter
display assembly using a pair of finad tipped twee 221s, board
2. Remove two M2.5x6 brass screws 2. Carefully rotate the FL inverter board out; fiom right,
3. There are 21 latches securing the display mask to left then disconnect the FL inverter cable from
Carefully insert your fingers between tha mask end the Cnt and the HV cable from CNZ
LCD panel and pry open the latches starting from the 3. Remove four M2.5x6 brass screws securing the
top six latches, to the five latches on the right LCD module.
and left sides, onding with the five bottom latches. 4. Carefully rotate the LCD module from right to left
of the LCD cover.
Disconnect the LCD cable from the LCD module and
remove the LCD from the computer
TOSHIBA
Tough Enough for Today’s World.FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra”
8000 Series
43.3 TFT DISPLAY MASK REMOVAL FL INVERTER AND 13.3 TFT LCD REMOVAL
2.6x6 M2.5x6
brass brass screws
screws
Mask-Seals FL cable M25%6 brass FL inverter board
screw
Remove tape and one M2x9 brass screw securing
1, Remove two mask seals at the bottom corners of the
display assembly using a pair of fine-tipped tweezers,
2. Remave two M2.5x6 brass screws FL inverter board.
3. There are 22 latches securing the dis play mask. 2. Carefully lit up the FL inverter board and
Carefully insert your fingers between the mask and the disconnect the FL inverter cable ftom CN1 and
LCD panel and pry open the latches starting from the the HV cable from CN2.
top six latchos,, to the five latches on the right 3. Remove four M2.5x6 brass screws secuiing the
and left sides, ending with the six bottom latches LCD module.
4. Carefully rotate he LCD module from right to lett
of the LCD cover.
5, Disconnect the LCD cable from the LCD module and
remove the LCD from the computor
TOSHIBA
ah Enough for Today’s World.FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra”
8000 Series
14.1 TFT DISPLAY MASK REMOVAL
FL INVERTER AND 14.1 TFT LCD REMOVAL
Mask seals
1. Remove two mask seals at the bottom comers of the
display assembly using a pair of fine-tipped tweezers.
2. Remove two M25x6 brass screws
3. There are 22 latches securing the display mask
Carefully insert your fingers between the mask and the
UCD panel and pry open the latches starting from the
top six latches, t0 the five latches on the right
and left sides, ending with the six bottomlatches.
LOD module
M2x8:
brass
sciews
FLinverfer cable M2x8 brass FL inverter board
screw
|. Remove one M2x5 brass screw securing FL inverter
board
2. Carefully lift up the FL inverter board and
disconnect the FL inverter cable from CN1 and
the HVcable from CN2
3. Remove four mask seals to expose four screws
securing the LCD module
4, Remove four M2X5 brass screws s2curing the
LCD module.
5. Carefully retate the LCD module from right to left
ofthe LCD cover
6. Disconnect the LCD cable from the LCD module and
remove the LCD from the computer
TOSHIBA
Tough Enough for Today’s World.