OPERACIN DE UN CONDENSADOR HORIZONTAL PARA OBTENER DATOS
EXPERIMENTALES Y PODER COMPARAR AREA DISPONIBLE CON AREA
CALCULADA
Palabras Clave: rea de transferencia de calor, condensacin, condensador horizontal, cambio de fase, entalpia, energa calorfica, extraccin, isotrmico, pelcula, velocidad, calor latente, presin, refrigerante. Key Words: heat transfer area, condensation, horizontal condenser, phase change, enthalpy, heat energy, extraction, isothermal, film, speed, latent heat, pressure, coolant.
Resumen En esta prctica operamos un intercambiador de calor pero con la caracterstica principal de que dentro de este existe un cambio de fase en un fluido. Al condensador se alimenta vapor saturado por el lado de la carcasa mientras que por los tubos circula un refrigerante, cuando el vapor tiene contacto con la superficie de los tubos fros, este condensa, es decir cambia de fase y su temperatura permanece constante (proceso isotrmico). Para el diseo adecuado de un condensador se requiere que el rea de transferencia de calor disponible del equipo sea menor que el rea calculada, de lo contrario la operacin que se quiere llevar a cabo bajo ciertas condiciones establecidas no podr ser posible. Para el condensador horizontal que se oper en el laboratorio y del cual se extrajeron datos que permitieron obtener coeficientes globales e individuales que permitieron calcular un rea, se concluye que no es adecuado su diseo, ya que el rea calculada fue mayor a la disponible.
Abstract In this practice operate a heat exchanger but with the main feature that within this there is a phase change in a fluid. The condenser steam is fed saturated by the side of the housing while the tubes circulates a refrigerant, when the steam contacts the surface of the cold tubes, this condensed, changes phase and the temperature remains constant (isothermal process ). For proper design of a capacitor is required that the heat transfer area of the equipment available is less than the calculated area, otherwise the operation you want to perform under certain prescribed conditions may not be possible. For horizontal condenser was operated in the laboratory and which data allowed to obtain global and individual coefficients were used to calculate an area is removed, concluded that the design is not suitable, since the calculated area was greater than that available.