Documentos de Académico
Documentos de Profesional
Documentos de Cultura
LOGO
ZXUR 9000 UMTS Radio Parameter
Version: RNCV4.12.10
Document Title
Access
OMC Access path
Parameter Modifying Version
Indication whether the parameter can be read (Read), written (Write) or modified after created (Restricted)
Path for how to Access the parameter in OMC
Whether this parameter is modified in this version
Introduction
1, Manual Description
This document lists and gives information about ZTE UMTS Radio Network Parameters. It contains the description of the parameter,
such as name, unit, value, range, default value, OMC Access path and etc.
2, Structure
Sheet of Radio Parameters gives information for all parameters.
The following information is presented for each parameter in Radio Parameters Sheet.
3, Intended Audience
Network planners
Field engineers
System engineers
Shift operators
Column Name In Radio Network
Parameters sheet
Column Description
Managed Object Managed object class the parameters belongs to.
Logical Name Parameter Name defined in Managed Object
3GPP Name Parameter name which is defined in 3GPP
3GPP Protocol Indication which 3GPP protocol defines the parameter
GUI Name OMC GUI name of the parameter
Parameter Description A brief introduction of the parameter
Instance The instance for which the parameter is configured.
Related FG The Feature Guide Doc in which the parameter is introduced
Value Range and Step The value range and step of the parameter
Unit The value unit of the parameter
Default Value The default value, as initially set by the system, if not explicitly set at MO creation.
Related Parameters The related parameters
Restriction with Related Parameters Define the relationship with the related parameters
TYPE
The parameter is divided into the following four category:
Fixed: the parameter value can be set default and need not adjust normally;
Fixed-keep monitoring: the parameter value can be initially set default and adjust later according to network performance;
Network Planing&Optimization: the value is set according to Network planning and optimization;
Don't Care: the parameter need not care ;
Negotiation With CN Indication whether the parameter should negotiate with core network setting
Function Switch Indication whether the parameter is a switch parameter
Configuration Rule and Adjustment Suggestion A brief configuration rule introduction for the parameter
Default Value Configuration Reason The reason for the default value setting
Change take effect Indicate when the new value will take effect after the parameter value is modified
How to Impact The detail description of the impaction after the parameter value is modified
Parameter Modifying Detail Modification details of this parameter in this version
Service or node impact Indicate whether the service or node is affected when the parameter valued is modified
Equipment Impaction Level
The equipment impaction when the parameter value is modified can be divided into four level according to the object
impacted
0: indicate no impaction when the parameter is modified
1: indicate impaction on the cell when the parameter is modified
2: indicate impaction on the nodeb when the parameter is modified
3: indicate impaction on the RNC when the parameter is modified
Service Impaction Level
The service impaction when the parameter value is modified can be divided into four level
0: indicate no impaction on the active user and idle user when the parameter is modified
1: indicate impaction on the idle user but no impaction on the active user
2: indicate no impaction on the idle user and impaction on the active user. The ongoing service will interrupt but the
service can be resume in short time (60s) for example the user can reinitialize the service at once;
3: indicate impaction on the idle user and the active user. The network service will interrupt for some time and will
resume later
ZTE Confidential Proprietary Introduction 2/1254
Abbreviation Managed Objects
ManagedElement Managed Element
URncFunction UMTS Logical Function Configuration
URncInfo Extended Info of RNC
UQosFunction QOS Function
UBasPri Qos Basic Configuration
USchPriMappingProfile Scheduling Priority Mapping
Relationship Profile
USchPriMapping Scheduling Priority Mapping
Relationship
UAppPriMappingProfile Application Priority Mapping
Relationship Profile
UAppPriMapping Application Priority Mapping
Relationship
UBPriAcProfile Access Control Profile Related to Basic
Priority
UBPriAc Access Control Related to Basic Priority
UTbTypeProfile Transport Bearer Type Profile Related
to Basic Priority
UTbType Transport Bearer Type Related to Basic
Priority
UDedSrvTbProfile Dedicated Service Transport Bearer
Qos Profile
UDedSrvTb Dedicated Service Transport Bearer
Qos Configuration
UPlmnSpecFunction Plmn Specific Function
UBasPriMapping Basic Priority Mapping Relationship
UDpiDrbc Dynamic Radio Bearer Control
Information of DPI Service
USrvBasedHo Handover Configuration Based on
Service
UIuCnst Iu Interface Timers and Constants
Information
UCnInfo CN NAS System Information
ULogicalRnc Logic RNC Configuration
ULogicalCell Logic Cell Configuration
ULogicalIubLink Logic Iub Link Configuration
ULogicalIurQos Qos Configuration Related to Logical Iur
Link
UMbmsSa MBMS Service Area Configuration
UMbmsPLFreq MBMS Preferred Frequency Layer
Configuration
UMbmsNPLFreq MBMS Non Preferred Frequency Layer
Configuration
USnac LAC and SNAC Information
UHspa Hspa Configuration
UCommEdch Common EDCH Configuration
UDrbcProfile Dynamic Radio Bearer Control
Information Profile
UDrbc Dynamic Radio Bearer Control
Information
UMbms MBMS Configuration
UDpiBasPriMapping DPI Basic Priority Mapping Relationship
UImsiSnacFilter User Authorized PLMN+SNAC
Information
UMR MR Configuration
UGloAc Global Access Control Information
UUeCnst UE Timers and Constants Information
UAppSrvType Application Service Type Configuration
UQChat QChat Service Configuration
UWhiteImsiList User Configuration in White List
UDtxDrxProfile UE DTX/DRX Profile
UDtxDrx UE DTX/DRX Configuration
USrvFunction Service Function
USubSrv Service Basic Configuration
USrvPcProfile Power Control Profile Related to
Service
USrvPc Power Control Related to Service
USrvDivPc Power Control Related to Service and
Diversity Mode
UWhiteSrvPc Power Control Related to Service for
White List
UTrvMeasProfile Traffic Volume Measurement Profile
URachEvtUeTrv UE Traffic Volume Event Measurement
Configuration for RACH
URachPrdUeTrv UE Traffic Volume Period Measurement
Configuration for RACH
UFachEvUpTrv UP Traffic Volume Event Measurement
Configuration for FACH
UDchEvUeTrv UE Traffic Volume Event Measurement
Configuration for DCH
UDchEvUpTrv UP Traffic Volume Event Measurement
Configuration for DCH
UDchPrdUeTrv UE Traffic Volume Period Measurement
Configuration for DCH
UDedSHsdschEvUpTrv UP Traffic Volume Measurement
Configuration Number for Streaming
Class on HS-DSCH
UDedIBHsdschEvUpTrv UP Traffic Volume Measurement
Configuration for Interactive and
Background Class on HS-DSCH
UComHsdschEvUpTrv UP Traffic Volume Measurement
Configuration for HS-DSCH in
CELL_FACH
UETTIEdchEvUpTrv UP Throughput Event Measurement
Configuration for E-TTI Switching
UDedEdchEvUpTrv UP Traffic Volume Measurement
Configuration for E-DCH
UComEdchEvUpTrv UP Traffic Volume Measurement
Configuration for E-DCH in
CELL_FACH
UEdchtoDchUpTrv E-DCH Throughput Measurement
Configuration for HS-DSCH/E-DCH to
HS-DSCH/DCH Switching
UIntraMeasProfile Intra-frequency Measurement Profile
UIntraMeasSrvSpec Intra-frequency Measurement
Configuration Related to Traffic
Category
UIntraEcNoEvMeas UEIntra-frequency Event Measurement
Configuration for CPICH Ec/No
UIntraRscpEvMeas UEIntra-frequency Event Measurement
Configuration for CPICH RSCP
UIntraMeasNoSrvSpec Intra-frequency Measurement
Configuration Unrelated to Traffic
Category
UIntraEcNoPrdMeas UEIntra-frequency Period Measurement
Configuration for CPICH Ec/No
UIntraRscpPrdMeas UEIntra-frequency Period Measurement
Configuration for CPICH RSCP
UIntraEcNoEvMeasForD Detected Set Measurement
Configuration for CPICH Ec/No
UIntraRscpEvMeasForD Detected Set Measurement
Configuration for CPICH RSCP
UInterMeasProfile UE Inter-frequency Measurement
Profile
UInterMeaSrvSpec Inter-frequency Measurement
Configuration Related to Traffic
Category
UInterEcNoEvMeasforU UE Inter-frequency Event Measurement
Configuration for CPICH
Ec/No(UTRAN)
UInterRscpEvMeasforU UE Inter-frequency Event Measurement
Configuration for CPICH
RSCP(UTRAN)
UInterEcNoEvMeasforG UE Inter-frequency Event Measurement
Configuration for CPICH Ec/No(GSM)
UInterRscpEvMeasforG UE Inter-frequency Event Measurement
Configuration for CPICH RSCP(GSM)
UInterEcNoEvMeasforE UE Inter-frequency Event Measurement
Configuration for CPICH
Ec/No(EUTRAN)
UInterRscpEvMeasforE UE Inter-frequency Event Measurement
Configuration for CPICH
RSCP(EUTRAN)
UInterMeasNoSrvSpec Inter-frequency Measurement
Configuration Unrelated to Traffic
Category
UInterEcNoPrdMeas UEInter-frequency Period Measurement
Configuration for CPICH Ec/No
UInterRscpPrdMeas UEInter-frequency Period Measurement
Configuration for CPICH RSCP
URatMeasProfile Inter-RAT Measurement Profile
URatMeasSrvSpec Inter-RAT Measurement Configuration
Related to Traffic Category
URatEcNoEvMeasforG UE Inter-RAT Event Measurement
Configuration for CPICH Ec/No(GSM)
URatRscpEvMeasforG UE Inter-RAT Event Measurement
Configuration for CPICH RSCP(GSM)
URatEcNoEvMeasforE UE Inter-RAT Event Measurement
Configuration for CPICH
Ec/No(EUTRAN)
URatRscpEvMeasforE UE Inter-RAT Event Measurement
Configuration for CPICH
RSCP(EUTRAN)
URatMeasNoSrvSpec Inter-RAT Measurement Configuration
Unrelated to Traffic Category
URatEcNoPrdMeas UEInter-RAT Period Measurement
Configuration for CPICH Ec/No
URatRscpPrdMeas UEInter-RAT Period Measurement
Configuration for CPICH RSCP
UUeIntMeasProfile UE Internal Measurement Profile
UAmrEvtTPUeInt UE Transmitted Power Event
Measurement Configuration for AMR
UPsEvtTPUeInt UE Transmitted Power Event
Measurement Configuration for PS
UHoEvtTPUeInt UE Transmitted Power Event
Measurement Configuration for
Handover
UPrdRttUeInt UE Rx-Tx Time Difference Period
Measurement Configuration for
Location
UEvtRttUeInt UE Rx-Tx Time Difference Event
Measurement Configuration for UTRAN
URlEvtRttUeInt UE Rx-Tx Time Difference Event
Measurement Configuration for RL
Timing Adjustment
UPwrLimTPUeInt UE Transmitted Power Event Report for
Power Limitation Judgement
UNbComMeasProfile NodeB Common Measurement Profile
UNbComMeas NodeB Common Measurement
Configuration
UNbDedMeasProfile NodeB Dedicated Measurement Profile
UNbDedMeas NodeB Dedicated Measurement
Configuration
UGbrResLimitProfile Limiting HSDPA GBR Resource
Consumption Profile
UGbrResLimit Limiting HSDPA GBR Resource
Consumption Configuration
UCfnOffset CFN Offset Configuration
ULocationArea Location Area Configuration
URoutingArea Routing Area Configuration
UServiceArea Service Area Configuration in CS+PS
Domain
UServiceAreaBc Service Area Configuration in BC
Domain
UUtranRegArea UTRAN Registration Area
UIubLink Iub Link Configuration
UIurLink Iur Link Configuration
UUtranCellFDD UTRAN Cell
UCelInfoFDD Extended Info of UTRAN Cell
UUtranRelation Neighbouring Cell
UGsmRelation GSM Neighbouring Cell
UEUtranRelation EUTRAN Neighbouring Cell
UENbrBlkList Eutran Neighbouring Cell Black List
UAich AICH Configuration
UPrach PRACH Configuration
USccpch SCCPCH Configuration
UPich PICH Configuration
UMich MICH Configuration
UScpich SCPICH Configuration
UCelSel Cell Selection and Reselection
Information
UPriSel Cell Reselection Frequency and Priority
Information
UCHspa Hspa Configuration In A Cell
UCMbms MBMS Configuration In A Cell
UEFach EFACH Configuration
UPlBal Load Balance Information
ULdCtrl Load Control Information
UCMR Cell MR Configuration
UExternalRncFunction External RNC Function
UExternalUtranCellFDD External UTRAN Cell
UExternalGsmCell External GSM Cell
UExternalENBFunction External ENodeB Function
UExternalEUtranCellFDD External EUTRAN Cell FDD
UExternalEUtranCellTDD External EUTRAN Cell TDD
UCNPoolRoutingFunction CS/PS Pool Routing Function
UIDNNSRouting Configuration of IDNNS route to Cs/Ps
Pool
UIMSIRouting Configuration of IMSI route to Cs/Ps
Pool
UImeiBlkList Imei for Black List
UImeiTacSPID Imei TAC List for SPID
UDePri RAN Priority When UE in Dedicated
State
UMPOProfile HS-PDSCH Measurement Power Offset
Profile
UMPO HS-PDSCH Measurement Power Offset
Configuration
Description
This managed element needs to be configured with a
netwrok element (such as single module XX, and dual-
module XX+YY).
This managed element indicates the parent node of
RNC functional configuration. It needs to be
configured with protocol parameters.
This managed element indicates the extended
information of RNC.
This managed element indicates the virtual node of
Qos function.
This managed element indicates the parameter
configuration information related to basic priorities.
This managed element indicates the profile of
scheduling priority.
This managed element indicates the configuration
information of scheduling priority.
This managed element indicates the profile of
application priority.
This managed element indicates the configuration
information of application priority.
This managed element indicates the access control
profile related to basic priorities.
This managed element indicates the access control
relationship related to basic priorities.
This managed element indicates the profile of transport
bearer types and I/B transport preserved bandwidth
that are related to basic priorities.
This managed element indicates the transport bearer
types and I/B transport preserved bandwidth that are
related to basic priorities.
This managed element indicates the profile of
dedicated services and transport Qos configuration.
This managed element indicates the corresponding
relationship between dedicated services and Qos
configuration.
This managed element indicates the common PLMN
information shared with this RNC. It is a virtual node of
radio services.
This managed element indicates the mapping
relationship among ARP, THP, Traffic Class, and basic
priorities.
This managed element indicates the Dynamic Radio
Bearer Control (DRBC) policy of DPI application
services related to PLMN.
This managed element indicates the handover policy
based on services when network elements are under
the single-module and dual-module conditions.
This managed element indicates the Iu-interface timers
and constants information related to PLMN.
This managed element indicates the CN NAS
information related to PLMN.
This managed element indicates the global RNC
configuration information related to PLMN.
This managed element indicates such information as
the DSAR parameter in a cell related to PLMN, and the
Qos priority index.
This managed element indicates such information as
the CE parameter in a Node B related to PLMN, and
the Qos index transmitted.
This managed element indicates the transmitted Qos
index in the adjacent RNC related to PLMN.
This managed element indicates the MBMS service
area information.
This managed element indicates the serving cell
information of the preferential frequency layer at the
MBMS service area.
This managed element indicates the serving cell
information of the non-preferential frequency layer at
the MBMS service area.
This managed element indicates the relationship
between LAC and SNAC when CN is not shared
across the network.
This managed element indicates the global information
of HSPA.
This managed element indicates the global information
of common EDCH.
This managed element indicates the configuration
information of dynamic radio bearer control related to
PLMN.
This managed element indicates the configuration
information of dynamic radio bearer control related to
PLMN.
This managed element indicates the global
configuration information of MBMS.
This managed element indicates the mapping
relationship among basic priorities when the application
DPI is obtained after the priority of application services
is mapped to its basic priorities.
This managed element indicates the relationship
between two managed objects (PLMN+ extended code,
and PLMN+SNAC) authorized to users.
This managed element indicates the switch parameter
of MR functions.
This managed element indicates the global
configuration information of access control.
This managed element indicates the UE timers and
constants information.
This managed element indicates the configuration
information related to application service types.
This managed element indicates the global
configuration of Qchat services.
This managed element indicates the user configuration
in the white list.
This managed element indicates the configuration
profile discontinuously sent by and received by the UE
in HSPA+.
This managed element indicates the table of
configuration information discontinuously sent by and
received by the UE in HSPA+.
This managed element indicates the container of
information tables related to a service sub-category.
This managed element indicates the functional node
information of a service subtype.
This managed element indicates the container of
information tables related to the power control of a
service subtype.
This managed element indicates the power control
information related to a service subtype.
This managed element indicates the power control
information related to service subtypes and diversities.
This managed element indicates the power control
information related to dedicated service subtypes of
users that are added to the white list.
This managed element indicates the profile of traffic
measurement.
This managed element indicates the event
measurement of UP traffic on RACH.
This managed element indicates the periodical
measurement of UE traffic on RACH.
This managed element indicates the event
measurement of UP traffic on RACH.
This managed element indicates the event
measurement of UE traffic on DCH.
This managed element indicates the event
measurement of UP traffic on DCH.
This managed element indicates the periodical
measurement of UE traffic on DCH.
This managed element indicates the event
measurement of UP traffic on HS-DSCH.
This managed element indicates the event
measurement of UP background-and-interactive
services on HS-DSCH.
This managed element indicates the event
measurement of UP traffic in the CELL_FACH state on
HS-DSCH.
This managed element indicates the event
measurement of UP traffic switched by ETTI on E-
DCH.
This managed element indicates the event
measurement of UP traffic on E-DCH.
This managed element indicates the event
measurement of UP traffic in the CELL_FACH state on
E-DCH.
This managed element indicates the E-DCH
throughput measurement configuration for HS-DSCH/E-
DCH to HS-DSCH/DCH switching.
This managed element indicates the intra-frequency
measurement profile.
This managed element indicates the intra-frequency
measurement related to service types.
This managed element indicates the intra-frequency
measurement of the Ec/No of events that are related to
service types.
This managed element indicates the intra-frequency
measurement of the RSCP of events that are related
to service types.
This managed element indicates the intra-frequency
measurement unrelated to service types.
This managed element indicates the intra-frequency
measurement of the Ec/No of periods that are related
to service types.
This managed element indicates the intra-frequency
measurement of the RSCP of periods that are
unrelated to service types.
This managed element indicates the intra-frequency
measurement of the Ec/No of detection-set events that
are unrelated to service types.
This managed element indicates the intra-frequency
measurement of the RSCP of detection-set events that
are unrelated to service types.
This managed element indicates the intra-frequency
measurement profile.
This managed element indicates the intra-frequency
measurement related to service types.
This managed element indicates the inter-frequency
measurement (UTRAN) of the Ec/No of events that are
related to service types.
This managed element indicates the inter-frequency
measurement (UTRAN) of the RSCP of events that are
related to service types.
This managed element indicates the inter-frequency
measurement (GSM) of the Ec/No of events that are
related to service types.
This managed element indicates the inter-frequency
measurement (GSM) of the RSCP of events that are
related to service types.
This managed element indicates the inter-frequency
measurement (EUTRAN) of the Ec/No of events that
are related to service types.
This managed element indicates the inter-frequency
measurement (EUTRAN) of the RSCP of events that
are related to service types.
This managed element indicates the inter-frequency
measurement unrelated to service types.
This managed element indicates the intra-frequency
measurement of the Ec/No of periods that are
unrelated to service types.
This managed element indicates the intra-frequency
measurement of the RSCP of periods that are
unrelated to service types.
This managed element indicates the inter-system
measurement profile.
This managed element indicates the inter-system
measurement related to service types.
This managed element indicates the inter-system
measurement (GSM) of the Ec/No of events that are
related to service types.
This managed element indicates the inter-system
measurement (GSM) of the RSCP of events that are
related to service types.
This managed element indicates the inter-system
measurement (EUTRAN) of the Ec/No of events that
are related to service types.
This managed element indicates the inter-system
measurement (EUTRAN) of the RSCP of events that
are related to service types.
This managed element indicates the inter-system
measurement unrelated to service types.
This managed element indicates the inter-system
measurement of the Ec/No of periods that are
unrelated to service types.
This managed element indicates the inter-system
measurement of the RSCP of periods that are
unrelated to service types.
This managed element indicates the internal
measurement relationship among a set of UEs,
including the Tcp/RTT event measurement and RTT
period measurement.
This managed element indicates measurements used
for AMR adjustment. Those measurements are the
internal measurement relationship of UE transmitted
power.
This managed element indicates measurements used
by PS services. Those measurements are the internal
measurement relationship of UE transmitted power.
This managed element indicates measurements used
for triggering handover. Those measurements are the
internal measurement relationship of UE transmitted
power.
This managed element indicates measurements used
for location. Those measurements are the periodical
internal measurement relationship of UE Rx-Tx time
difference.
This managed element indicates the internal
measurement relationship of UTRAN judgement
events of UE Rx-Tx time difference.
This managed element indicates measurements used
for radio-link timing adjustment. Those measurements
are the internal measurement relationship of UE Rx-Tx
time difference.
This managed element indicates UE transmitted power
event report for power limitation judgement.
This managed element indicates the common
measurement relationship among a set of Node Bs,
including the measurement of periodical
RTWP/TCP/TUtranGps/HRP/NHTCP/RSEPS, and the
measurement of changed TUtranGps.
This managed element indicates the measurement of
periodical
RTWP/TCP/TUtranGps/HRP/NHTCP/RSEPS, and the
measurement of changed TUtranGps.
This managed element indicates the dedicated
measurement profile of a set of Node Bs.
This managed element indicates the dedicated
measurement relationship of Node Bs.
This managed element indicates the parameter
information profile of HSDPA GBR resource
consumption limiting.
This managed element indicates the parameter
information of HSDPA GBR resource consumption
limiting.
This managed element indicates the CFN offset
configuration.
This managed element indicates the LA information of
an RNC. The maximum number of LAs is 100.
This managed element indicates the RA information of
an RNC. The maximum number of SAs is 2560.
This managed element indicates the SA information of
an RNC.
This managed element indicates the SA information in
the BC domain of an RNC.
This managed element indicates the cell information of
a URA.
This managed element indicates the configuration
information of Node Bs of an RNC.
This managed element indicates the configuration
information of Node Bs of an RNC.
This managed element indicates the serving cell
information and configuration parameters defined in
the 3GPP UTRAN resource information model.
This managed element indicates the supplementary
information of a cell.
This managed element indicates the relationship of the
internal and external cells of UTRAN.
This managed element indicates the relationship of
UTRAN cells and external GSM cells.
This managed element indicates the adjacent
relationship of UTRAN cells and EUTRAN cells. It is
configured with protocol parameters.
This managed element indicates the black list of Eutran
Neighbouring Cell.
This managed element indicates the AICH
configuration.
This managed element indicates the PRACH
configuration
This managed element indicates the SCCPCH
configuration.
This managed element indicates the PICH
configuration.
This managed element indicates the MBMS
configuration.
This managed element indicates the SCPICH
configuration.
This managed element indicates the relationship
between cell selection and reselection.
This managed element indicates the cell reselection
frequency and priority information.
This managed element indicates the HSPA
configuration in a cell.
This managed element indicates the MBMS
configuration in a cell.
This managed element indicates the EFACH
configuration.
This managed element indicates the power load
balance information.
This managed element indicates the load control
relationship.
This managed element indicates the parameter of the
MR functional switch that is related to cells.
This managed element indicates the adjacent RNC of
this RNC.
This managed element indicates the information about
adjacent cells that are not belong to this RNC. It is
configured with protocol parameters.
This managed element indicates the cell configuration
information of GSM. It is configured with protocol
parameters.
This managed element indicates the NodeB
configuration information of EUTRAN.
This managed element indicates the cell configuration
information of EUTRAN.
This managed element indicates the cell configuration
information of EUTRAN.
This managed element indicates the configuration for
the route information of CS/PS POOL.
This managed element indicates the configuration for
the route information from IDNNS to CS/PS POOL.
This managed element indicates the configuration for
the route information from IMSI to CS/PS POOL.
This managed element indicates the black list of IMEI.
This managed element indicates the IMEI TAC list for
SPID.
This managed element indicates the RAN priority when
UE in dedicated state.
This managed element indicates the HS-PDSCH
measurement power offset profile.
This managed element indicates the HS-PDSCH
measurement power offset configuration.
Managed
Object
Logical Name 3GPP Name 3GPP Reference GUI Name
URncFunction URncFunction N/A N/A RNC Configuration Object ID
URncFunction description N/A N/A Description
URncFunction userLabel N/A N/A User Label
URncFunction rncid N/A N/A RNC Identity
URncFunction sharedNetMode N/A N/A Shared Network Mode
URncFunction plmnSelectMethod N/A N/A
Plmn Select Method for
MOCN Network Sharing
URncFunction initRrcOnDch N/A N/A
Type of Transport Channel
for Initial RRC Connection
Setup
URncFunction gpsInfoRoot N/A N/A GPS Information Root
URncFunction cellLdInfoVldTim N/A TS 25.413
Duration of Valid Cell Load
Info
URncFunction nonCMaxPduSize
Maximum MAC-
d PDU Size
Extended
TS 25.423;
TS 25.433
Downlink Non-
Conversational Service
Maximum MAC-d PDU Size
Extended
URncFunction cMaxPduSize
Maximum MAC-
d PDU Size
Extended
TS 25.423;
TS 25.433
Downlink Conversational
Service Maximum MAC-d
PDU Size Extended
URncFunction cMaxUlPduSize
Largest UL RLC
PDU size
TS 25.331
Uplink Conversational
Service Maximum Uplink
RLC PDU Size
URncFunction cMinUlPduSize
Minimum UL
RLC PDU size
TS 25.331
Uplink Conversational
Service Minimum Uplink
RLC PDU Size
URncFunction nonCMaxUlPduSize
Largest UL RLC
PDU size
TS 25.331
Uplink Non-Conversational
Service Maximum Uplink
RLC PDU Size
URncFunction nonCMinUlPduSize
Minimum UL
RLC PDU size
TS 25.331
Uplink Non-Conversational
Service Minimum Uplink
RLC PDU Size
URncFunction harqRvConfig
HARQ RV
Configuration;
HARQ Info for E-
DCH
TS 25.331;
TS 25.433;
TS25.423
HARQ RV Configuration
URncFunction maxRateWithNVHs N/A N/A
Maximum Bit Rate with HS-
SCCH Less for Non-
VoIP/AMR
URncFunction emgCallRdtSwitch N/A N/A
Emergency Call Redirect
Switch
URncFunction
interRatV1V2AmrC
ut
N/A N/A
Inter-RAT V1+V2 Amr Cut
Decision
URncFunction
intraRatV1V2AmrC
ut
N/A N/A
Intra-RAT V1+V2 Amr Cut
Decision
URncFunction csRrcOnFachSwch N/A N/A
Switch of Non Emergency
CS Service Access to
CELL_FACH On RRC
URncFunction t4StpIfMeaActRat N/A N/A
Timer for Stopping Inter-
frequency Measurement and
Activating Inter-RAT
Measurement
URncFunction dcRedirectStaSw N/A N/A
Dual Carrier Redirection
Strategy Switch
URncFunction bwOvldRelUeNum N/A N/A
the Release UE Number
when Band Exceeds Limit
URncFunction rrcSetupRetraNum N/A N/A
Maximum Number of
Retransmissions of the RRC
CONNECTION SETUP
URncFunction tRrcSetupRetran N/A N/A
Interval of Retransmission of
RRC CONNECTION SETUP
URncFunction n308 N308 TS 25.331
Maximum Number of
Retransmissions of the RRC
CONNECTION RELEASE
COMPLETE Message
(N308)
URncFunction nReTran N/A N/A
Maximum Number of
Retransmissions of the RRC
CONNECTION RELEASE
Message
URncFunction maxCsDelay Max CS Delay TS 25.331 Max CS Delay
URncFunction dToHsDelayThr N/A N/A
Delay Time Threshold of D/D-
>HS/D or HS/E after HS/D or
HS/E ->D/D
URncFunction upUdRecfgTimer N/A N/A
Wait Timer for Adjusting
Uplink and Downlink
Reconfiguration by One Step
Upward
URncFunction dnUdRecfgTimer N/A N/A
Wait Timer for Adjusting
Uplink and Downlink
Reconfiguration by One Step
Downward
URncFunction tRbRecfgCmpDtoF N/A N/A
Wait Time for RADIO
BEARER
RECONFIGURATION
COMPLETE when
CELL_DCH to CELL_FACH
URncFunction iuUlInSeqDlvInd N/A N/A
IU Uplink in Sequence
Delivery Indicator whether
According to Indication from
CN
URncFunction rncLcsOverIurSw N/A N/A
Lcs over Iur Support
Indicator
URncFunction multicastSupInd N/A
TS 25.331;
TS 25.413
MBMS Multicast Mode
Support Indicator
URncFunction eBroadcastSupInd N/A
TS 25.331;
TS 25.413
MBMS Enhanced Broadcast
Mode Support Indicator
URncFunction mbmsIurSupInd N/A
TS 25.331;
TS 25.413
MBMS over Iur Support
Indicator
URncFunction mbms8kRateSwitch N/A N/A
MBMS Channel Rate
Support Indicator (8kbps)
URncFunction
mbms16kRateSwitc
h
N/A N/A
MBMS Channel Rate
Support Indicator (16kbps)
URncFunction
mbms32kRateSwitc
h
N/A N/A
MBMS Channel Rate
Support Indicator (32kbps)
URncFunction
mbms64kRateSwitc
h
N/A N/A
MBMS Channel Rate
Support Indicator (64kbps)
URncFunction
mbms128kRateSwit
ch
N/A N/A
MBMS Channel Rate
Support Indicator (128kbps)
URncFunction
mbms256kRateSwit
ch
N/A N/A
MBMS Channel Rate
Support Indicator (256kbps)
URncFunction intraHoEcNoThrd N/A N/A
Cpich Ec/N0 Minimum
Threshold for Intra-
Frequency Handover
URncFunction intraHoRscpThrd N/A N/A
Cpich Rscp Minimum
Threshold for Intra-
Frequency Handover
URncFunction tcnquery N/A N/A Timer for State Query
URncFunction cbsSwitch N/A N/A CBS Function Switch
URncFunction pchToAWS ToAWS TS 25.433
Time of Arrival Window
Startpoint for PCH
URncFunction pchToAWE ToAWE TS 25.433
Time of Arrival Window
Endpoint for PCH
URncFunction fachToAWS ToAWS TS 25.433
Time of Arrival Window
Startpoint for FACH
URncFunction fachToAWE ToAWE TS 25.433
Time of Arrival Window
Endpoint for FACH
URncFunction t321 T321 TS 25.331
Inactivity Time of E_FACH
Transmission (T321)
URncFunction drxCycleLength
HS-DSCH DRX
cycleFACH
TS 25.331
Cycle Length of Discontinue
Receiving of E-FACH
URncFunction rxBurstlength
HS-DSCH Rx
burstFACH
TS 25.331
Length of Receiving Frames
in E-FACH DRX
URncFunction ueDrxInd N/A N/A
Indication of UE with
Enhanced DRX
URncFunction tiureldelay N/A N/A
Timer for IU Release
Resource
URncFunction kUtran
UTRAN DRX
cycle length
coefficient
TS 25.331
UTRAN DRX Cycle Length
Coefficient
URncFunction rabMeaBalStaSwch N/A N/A
Inter-Frequency Balance
Switch Based on
Measurement
URncFunction coverMeaBalSwch N/A N/A
Inter-Frequency Balance
Switch Based on
Measurement with
Overlapping or Covering
Relation
URncFunction measBalTimer N/A N/A
Timer of Deactivate
Compressed Mode for
Balance Strategy Based On
Measurement
URncFunction tResndMeaCtrlRel N/A N/A
The Time Threshold that the
RNC May Resend the
MEASUREMENT CONTROL
RELEASE
URncFunction heartBeatUeVerR4 N/A N/A
The Target of UE Version for
Heart Beat (R4)
URncFunction heartBeatUeVerR5 N/A N/A
The Target of UE Version for
Heart Beat (R5)
URncFunction heartBeatUeVerR6 N/A N/A
The Target of UE Version for
Heart Beat (R6)
URncFunction heartBeatUeVerR7 N/A N/A
The Target of UE Version for
Heart Beat (R7)
URncFunction heartBeatUeVerR8 N/A N/A
The Target of UE Version for
Heart Beat (R8)
URncFunction heartBeatFreq N/A N/A Heart Beat Period
URncFunction onlyDnOnHB N/A N/A
The Switch Indicates
whether Only Judge the
Downlink Traffic on Heart
Beat for Channel Switching
to PCH/IDLE
URncFunction berTargAdpTimer N/A N/A
BER Target Adjust Timer in
Fast OLPC SIR Target
Downward Adjustment
Based on BER
URncFunction tWaitRlRestore N/A N/A
Time of Waiting for RADIO
LINK RESTORE
INDICATION
URncFunction tWaitCelUpUuExp N/A N/A
Time of Waiting for CELL
UPDATE After RNC Sending
Radio Link Deactivation
Command for RB
Setup/Reconfiguration/Relea
URncFunction tWaitActSetUpCmp N/A N/A
Waiting time length for
ACTIVE SET UPDATE
COMPLETE
URncFunction waitRbCompTimer N/A N/A
Time of Waiting for RB
Setup/Reconfiguration/Relea
se Response over Uu
Interface
URncFunction tRrcConSetupExp N/A N/A
Time of Waiting for RRC
CONNECTION COMPLETE
URncFunction celChgFastCfgInd N/A N/A
Switch of Fast
Reconfiguration Function
When the HS Service Cell
was Changed
URncFunction tWaitContextReq N/A N/A
Waiting Time for SRNS
Context Request
URncFunction tWaitDataFwd N/A N/A
Waiting Timer for SRNS
DATA FORWARD
COMMAND
URncFunction tWaitRelCmd N/A N/A
Waiting Timer of SRNS for
IU RELEASE COMMAND
while PS service handover
from 3G to 2G
URncFunction csNriBitNum N/A N/A
Network Resource Identifier
Bit Num in CS Domain
URncFunction psNriBitNum N/A N/A
Network Resource Identifier
Bit Num in PS Domain
URncFunction amrGbrResInd N/A N/A
GBR of AMR Service
Whether to be Reserved
Indicator
URncFunction locModeSwch N/A N/A Location Mode
URncFunction qChatSupportInd N/A N/A QChat Support Indicator
URncFunction fastRetEUtranSwch N/A N/A
RNC Switch of Fast Return
to E-UTRAN
URncFunction rubRsvdSwch N/A N/A Reserved RUB Switch
URncFunction
rubRsvdNeedUEVe
r
N/A N/A
UE Version for Reserved
RUB
URncFunction shaNetTarCelStra N/A N/A
Target Cell Judgment
Strategy for
Access/Handover Algorithm
in Shared Network
URncFunction hcsSupportInd N/A N/A HCS Support Indicator
URncFunction deviceTypeInd N/A N/A
UE's Device Type Condition
Whether to be Judged
Indicator when Heart Beat
Detection
URncFunction cdtOvdThd N/A N/A CDT Overload Threshold
URncFunction tReCfgLevCmnStat N/A N/A
Wait Time for
RECONFIGURATION
COMPLETE when UE
Leaving PCH or FACH State
to Enter CELL _DCH State
URncFunction rrcOnHsDc N/A N/A
RRC on HS Channel with
DC Indicator
URncFunction iurPwrCtlReqSwch N/A N/A
Switch of Using DL Power
Control Request Information
in Iur Interface
URncFunction iurEcNoDelta N/A N/A
The Offset of CPICH Ec/No
in Iur Interface Relative to
the UE Measurement Result
URncFunction r99R4PchSwch N/A N/A
Switch of
URA_PCH/CELL_PCH for
UE of Release 99 and
Release 4
URncFunction utraSISwitch N/A N/A UTRA SI Switch
URncFunction appSrvDetcPrid N/A N/A
Application Service
Detection Period
URncFunction totalDataNum N/A N/A Total Data Number
URncFunction dpiPendingTime N/A N/A DPI Peading Time
URncFunction defPlmnInGwcnInd N/A N/A
User-defined PLMN
Selection In Case of GWCN
support Indicator
URncFunction mulPlmnInMIBInd N/A N/A
Multiple PLMNs is allowed In
MIB or not
URncFunction parallelRrcSetup N/A N/A
Switch of RNC Send RL
SETUP and RRC
CONNECTION SETUP in
Parallel when Setting up
RRC CONNECTION
URncFunction routeTypeUEBased N/A N/A
The Routing Select Type for
UE-Based
URncFunction csThdForEngCon N/A N/A
CS Service Threshold for
energy conservation
URncFunction ueThdForEngCon N/A N/A
UE Threshold for energy
conservation
URncFunction csThdForAttSwch N/A N/A
CS Service Threshold for
Board Attribution switch
URncFunction ueThdForAttSwch N/A N/A
UE Threshold for Board
Attribution switch
URncFunction brdPwrOffWaitTim N/A N/A
Time to wait Service auto
hang off before Board power
off
URncFunction fastL1SyncSwch N/A N/A
Switch of Faster L1 DCH
synchronization
URncFunction norCmpUserAcThd N/A N/A
CMP User Admission
Control Threshold When the
Module in Normal Running
URncFunction norDmpUserAcThd N/A N/A
DMP User Admission
Control Threshold When the
Module in Normal Running
URncFunction tWaitCelUpRlDact N/A N/A
Time of Waiting for CELL
UPDATE After RNC Waiting
ACTIVE SET UPDATE
COMPLETE/
RECONFIGUATION
URncFunction vLacPaingInd N/A N/A
Virtual LAC Paging Support
Indication
URncFunction poWhiteListUser N/A N/A
Power Offset for White List
User
URncFunction dropForVipSwitch N/A N/A
User Drop Switch Triggered
by VIP
URncFunction vipEstNtfSwitch N/A N/A VIP Exist Notification Switch
URncFunction vipEstNtfNbrPrio N/A N/A
Lowest Priority of Neighbor
Cell Notified of VIP Existing
URncFunction whtLstSwitch N/A N/A Switch for White List
URncFunction sirUpAddStep N/A N/A
Additional Size for Uplink
SIR Target Increasing When
Consecutive Error TB
Occurs
URncFunction validTimTbCovPrd N/A N/A
Valid Time Window for the
TB in Shield Period
URncFunction boardPwrOffHoTmr N/A N/A
The Waiting Timer for UE
Handover When Board's
Power is Off
URncFunction maxCallCapability N/A N/A Maximum Call Capacity
URncFunction maxThroughput N/A N/A
Maximum Data Process
Capacity
URncFunction
mscpoolBalanceNu
m
N/A N/A
Load Balance Parameter in
MSC Pool
URncFunction
sgsnpoolBalanceNu
m
N/A N/A
Load Balance Parameter in
SGSN Pool
URncFunction vipSpecFreqSwch N/A N/A
VIP Specific Frequency
Strategy Switch
URncFunction vipDlArfcnforCsInd N/A N/A
CS VIP Specific Downlink
Carrier Central Frequency
Indicator
URncFunction vipForcedHOSwch N/A N/A VIP Forced Handover Switch
URncFunction balFailOpSwch N/A N/A
Switch of Optimization When
Load Balance Fail.
URncFunction vipDlArfcnforPsInd N/A N/A
PS VIP Specific Downlink
Carrier Central Frequency
Indicator
URncFunction parallelSoftHO N/A N/A
Switch of RNC Send RL
SETUP and ACTIVE SET
UPDATE Parallelly when
Soft Add Handover
URncFunction
dscrInCmnToDedS
wch
N/A N/A
Switch of DSCR in
transferring unsuccessfully
from Common Status to
CELL_DCH status
URncFunction imeiBlackSwch N/A N/A Imei blacklist Switch
URncFunction
sonTransRespSwitc
h
N/A N/A
Son Transfer Response
Switch
URncFunction sonTransReqPeriod N/A N/A
The period of RNC starting
the SON Transfer.
URncFunction
sonTransReqNumT
hrd
N/A N/A
Son Transfer Request
Number Threshold in one
second
URncFunction
sonTransRespNum
Thrd
N/A N/A
Response the Son Transfer
message Number Threshold
in one second
URncFunction ldBsdEutranHOInd N/A N/A
Inter System Handover with
Consideration of Eutran
Load Support Indicator
URncFunction
numPeriodCreatCel
l
N/A N/A
This parameter indicates the
number of setup cells in one
period.
URncFunction startDsarCelNum N/A N/A
Number of Cells Updating
SIB3 When Starting the
DSAR according to the Iu
URncFunction startDsarCelInt N/A N/A
Time Interval Updating SIB3
among Cells When Starting
the DSAR according to the Iu
URncFunction stopDsarCelNum N/A N/A
Number of Cells Updating
SIB3 When Stopping the
DSAR According to the Iu
and When Changing the
DSAR Switch
URncFunction stopDsarCelInt N/A N/A
Time Interval Updating SIB3
among Cells When Stopping
the DSAR According to the
Iu and When Changing the
DSAR Switch
URncFunction mulEdchTrBearMod
Multicell E-DCH
Transport
Bearer Mode
TS 25.331
Multicell E-DCH Transport
Bearer Mode
URncFunction vipDlResBwd N/A N/A
Downlink Reserved
Bandwidth for VIP UE's I/B
Traffic
URncFunction fltIncmpNbrCelSwit N/A N/A
Switch of Filtering the
incomplete Neighboring
Cells in SIB
URncFunction highPriAcSwch N/A N/A
Admission Control Switch for
High Priority Traffic when
Resource Congestion
URncFunction interHoMth N/A N/A
Inter-frequency Handover
Method
URncFunction intRatHoMth N/A N/A Inter-RAT Handover Method
URncFunction relocFastCfgInd N/A N/A
Switch of Fast
Reconfiguration Function for
Relocating into DRNC
URncFunction
emiMeasInCDTSwc
h
N/A N/A
The Switch for the EMI
Function in CDT-CR
URncFunction vipStateChgSwch N/A N/A
VIP User State Transfer
Switch
URncFunction ratCelInfoSwch N/A N/A
Inter-rat Cell Information
indication Strategy
URncFunction paging1RspTimer N/A N/A
Paging Type1 Response
Timer
URncFunction maxCfgSatNum N/A N/A
Maximum Satelite Number in
Position measurement
Control Message
URncFunction fachCacToMinRate N/A N/A
FACH CAC Tolerable
Minimum Bit Rate
URncFunction psL2USwchByCs N/A N/A
Switch of Permit PS
Handover from LTE to
UTRAN Because of CSFB
URncFunction uciuErrorOpSwch N/A N/A
Switch of Optimization When
UCIU ERROR
URncFunction rlFailureOpSwch N/A N/A
Switch of Optimization When
RL FAILURE
URncFunction discCNUpdReject N/A N/A
Switch of whether to discard
redirection LU-Reject/Attach-
Rej when the link of
subsequent Iu is break
URncFunction dsarSwch N/A N/A Switch of DSAR
URncFunction closeFreFunSwit N/A N/A
Switch off Frequency
Intelligently Function
URncFunction rncUlBlerHoSwch N/A N/A
RNC Switch for Handover
Based on UL BLER
URncFunction rncTxPwrHoSwch N/A N/A
RNC Switch for Handover
Based on UE Tx Power
URncFunction sscopSmoothTime N/A N/A
Smooth admission time
when sscop congestion
disappeared
URncFunction imeiPcFunSwitch N/A N/A
IMEI Based Power Control
Function Switch
URncFunction enhanceHoSwch N/A N/A Enhanced Handover Switch
URncFunction gResPara1 N/A N/A
Global Reserved Parameter
1
URncFunction gResPara2 N/A N/A
Global Reserved Parameter
2
URncFunction gResPara3 N/A N/A
Global Reserved Parameter
3
URncFunction gResPara4 N/A N/A
Global Reserved Parameter
4
URncFunction gResPara5 N/A N/A
Global Reserved Parameter
5
URncFunction gResPara6 N/A N/A
Global Reserved Parameter
6
URncFunction gResPara7 N/A N/A
Global Reserved Parameter
7
URncFunction gResPara8 N/A N/A
Global Reserved Parameter
8
URncFunction gResPara9 N/A N/A
Global Reserved Parameter
9
URncFunction gResPara10 N/A N/A
Global Reserved Parameter
10
URncFunction gResPara11 N/A N/A
Global Reserved Parameter
11
URncFunction gResPara12 N/A N/A
Global Reserved Parameter
12
URncFunction gResPara13 N/A N/A
Global Reserved Parameter
13
URncFunction gResPara14 N/A N/A
Global Reserved Parameter
14
URncFunction gResPara15 N/A N/A
Global Reserved Parameter
15
URncFunction gResPara16 N/A N/A
Global Reserved Parameter
16
URncFunction gResPara17 N/A N/A
Global Reserved Parameter
17
URncFunction gResPara18 N/A N/A
Global Reserved Parameter
18
URncFunction gResPara19 N/A N/A
Global Reserved Parameter
19
URncFunction gResPara20 N/A N/A
Global Reserved Parameter
20
URncFunction gResPara41 N/A N/A
Global Reserved Parameter
41
URncFunction gResPara42 N/A N/A
Global Reserved Parameter
42
URncFunction gResPara43 N/A N/A
Global Reserved Parameter
43
URncFunction gResPara44 N/A N/A
Global Reserved Parameter
44
URncFunction gResPara45 N/A N/A
Global Reserved Parameter
45
URncFunction gResPara46 N/A N/A
Global Reserved Parameter
46
URncFunction gResPara47 N/A N/A
Global Reserved Parameter
47
URncFunction gResPara48 N/A N/A
Global Reserved Parameter
48
URncFunction gResPara49 N/A N/A
Global Reserved Parameter
49
URncFunction gResPara50 N/A N/A
Global Reserved Parameter
50
URncFunction gResPara51 N/A N/A
Global Reserved Parameter
51
URncFunction gResPara52 N/A N/A
Global Reserved Parameter
52
URncFunction gResPara53 N/A N/A
Global Reserved Parameter
53
URncFunction gResPara54 N/A N/A
Global Reserved Parameter
54
URncFunction gResPara55 N/A N/A
Global Reserved Parameter
55
URncFunction gResPara56 N/A N/A
Global Reserved Parameter
56
URncFunction gResPara57 N/A N/A
Global Reserved Parameter
57
URncFunction gResPara58 N/A N/A
Global Reserved Parameter
58
URncFunction gResPara59 N/A N/A
Global Reserved Parameter
59
URncFunction gResPara60 N/A N/A
Global Reserved Parameter
60
URncInfo URncInfo N/A N/A
Extended Info of RNC Object
ID
URncInfo cqiFeedbaLoadSwi N/A N/A
The Switch of CQI Feedback
Cycle and CQI Repetition
Factor Adjustment Based on
Load
URncInfo vipRrcSrb272Swch N/A N/A
Switch of the DCH 27.2Kbps
Rate whether to be Used for
VIP User's Initial RRC
Connection Setup
URncInfo badCovRrcSwch N/A N/A
Switch of the RRC
Connection Access Strategy
For Bad Coverage
URncInfo amrBadCovSwh N/A N/A
AMR Initial Date Rate
Decreasing in Bad Coverage
Switch
URncInfo initUEFiDAcSai N/A N/A
Filling SAI Corresponding
with CELL Consuming Radio
Resources Indicator
URncInfo eToD4BtimesThr N/A N/A
E-DCH Throughput
Measurement Event 4B
Counter Threshold for the
HS-DSCH/E-DCH to HS-
DSCH/DCH Switching
URncInfo blerArpSwitch N/A N/A
The Switch for ARP based
BLER Function
URncInfo defaultArpSeg N/A N/A Default ARP Segment
URncInfo arpGoldPc N/A N/A
ARP Threshold of Golden
Subscriber Used in Power
Control
URncInfo arpBronzePc N/A N/A
ARP Threshold of Bronze
Subscriber Used in Power
Control
URncInfo loadFilterCoeff N/A N/A Load Filter Coefficient
URncInfo userNumFilterCoeff N/A N/A
User Number Filter
Coefficient
URncInfo sirRapidConvSwi N/A N/A
SIR Target Rapid
Convergence Switch
URncInfo olpcBerSwitch N/A N/A
Uplink BER OLPC Algorithm
Switch
URncInfo shieldPeriodSwch N/A N/A Shield Period Switch
URncInfo berFilterCoeff N/A N/A BER Filter Coefficient
URncInfo olPcAlg N/A N/A
Normal OLPC Algorithm
Method
URncInfo outSirTimWinSize N/A N/A
Time Window Size of
Opening Shield Period
URncInfo outSirThresh N/A N/A
Threshold of Opening Shield
Period
URncInfo shieldPeriod N/A N/A Shield Period
URncInfo rxlevNecellInd N/A N/A
Switch of RXLEV-NECELL
indication in
oldBSS_ToNewBSS
URncInfo modNasPlmnSwch N/A N/A
Modify PLMN of NAS
Message Switch
URncInfo fillCnInfoSwch N/A N/A
Fill Cn Information IE in Uu
Message or Not
URncInfo eutranPsHoMode N/A N/A
PS Handover to Eutran
Mode
URncInfo psHoLteMeasTimer N/A N/A
Timer of Deactivate
Compressed Mode for Fast
Return to Eutran
URncInfo
vipFastL1SyncSwc
h
N/A N/A
Switch of Faster L1 DCH
synchronization function for
VIP
URncInfo
pchCsPageRsdSwc
h
N/A N/A
Switch of CS Paging Resend
in PCH Status
URncInfo
pchCsPageRsdTim
er
N/A N/A
Timer of CS Paging Resend
in PCH Status
ULocationArea ULocationArea N/A N/A
Location Area Configuration
Object ID
ULocationArea lac
LAC; Location
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Location Area Code
URoutingArea URoutingArea N/A N/A
Routing Area Configuration
Object ID
URoutingArea rac
RAC; Routing
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Routing Area Code
UServiceArea UServiceArea N/A N/A
Service Area Configuration
in CS+PS Domain Object ID
UServiceArea sac
SAC; Service
Area Code
TS 25.423;
TS 25.413;
TS 23.003
Service Area Code for CS
and PS Domain
UServiceAreaB
c
UServiceAreaBc N/A N/A
Service Area Configuration
in BC Domain Object ID
UServiceAreaB
c
sacbc
SAC; Service
Area Code
TS 25.419;
TS 23.003
Service Area Code for BC
Domain
ULogicalRnc ULogicalRnc N/A N/A
Logic RNC Configuration
Object ID
ULogicalRnc gsmBARangeNum
maxNumGSMFr
eqRanges
TS 25.331 Number of GSM BA Range
ULogicalRnc gsmLRange
GSM Lower
Range
(UARFCN)
TS 25.331 GSM Lower Range
ULogicalRnc gsmURange
GSM Upper
Range
(UARFCN)
TS 25.331 GSM Upper Range
ULogicalRnc fddFreqRngNum
maxNumFDDFr
eqs
TS 25.331
Number of FDD UMTS
Frequency Range
ULogicalRnc lUarfcn
UARFCN
(Nlow)
TS 25.331 UARFCN (Nlow)
ULogicalRnc uUarfcn
UARFCN
(Nupper)
TS 25.331 UARFCN (Nupper)
ULogicalRnc amrRncAdjust N/A N/A
AMR Rate Adjustment
Switch for RNC
ULogicalRnc qosNegRenegSw N/A N/A
Switch for QoS
Negotiation/Renegotiation
ULogicalRnc mrSw N/A N/A MR Function Switch
ULogicalRnc integrityAlgUIA1
Integrity
protection
algorithm;
Integrity
Protection
TS 25.331;
TS 25.413
Integrity Protection Algorithm
(UIA1)
ULogicalRnc integrityAlgUIA2
Integrity
protection
algorithm;
Integrity
Protection
TS 25.331;
TS 25.413
Integrity Protection Algorithm
(UIA2)
ULogicalRnc encryAlgUEA0
Encryption
Algorithm
TS 25.413 Encryption Algorithm (UEA0)
ULogicalRnc encryAlgUEA1
Encryption
Algorithm
TS 25.413 Encryption Algorithm (UEA1)
ULogicalRnc encryAlgUEA2
Encryption
Algorithm
TS 25.413 Encryption Algorithm (UEA2)
ULogicalRnc
amrNbMode0UseT
ag
N/A N/A AMR_NB 4.75k Use Tag
ULogicalRnc
amrNbMode1UseT
ag
N/A N/A AMR_NB 5.15k Use Tag
ULogicalRnc
amrNbMode2UseT
ag
N/A N/A AMR_NB 5.90k Use Tag
ULogicalRnc
amrNbMode3UseT
ag
N/A N/A AMR_NB 6.70k Use Tag
ULogicalRnc
amrNbMode4UseT
ag
N/A N/A AMR_NB 7.40k Use Tag
ULogicalRnc
amrNbMode5UseT
ag
N/A N/A AMR_NB 7.95k Use Tag
ULogicalRnc
amrNbMode6UseT
ag
N/A N/A AMR_NB 10.2k Use Tag
ULogicalRnc
amrNbMode7UseT
ag
N/A N/A AMR_NB 12.2k Use Tag
ULogicalRnc
amrWbMode0UseT
ag
N/A N/A AMR_WB 6.60k Use Tag
ULogicalRnc
amrWbMode1UseT
ag
N/A N/A AMR_WB 8.85k Use Tag
ULogicalRnc
amrWbMode2UseT
ag
N/A N/A AMR_WB 12.65k Use Tag
ULogicalRnc
amrWbMode3UseT
ag
N/A N/A AMR_WB 14.25k Use Tag
ULogicalRnc
amrWbMode4UseT
ag
N/A N/A AMR_WB 15.85k Use Tag
ULogicalRnc
amrWbMode5UseT
ag
N/A N/A AMR_WB 18.25k Use Tag
ULogicalRnc
amrWbMode6UseT
ag
N/A N/A AMR_WB 19.85k Use Tag
ULogicalRnc
amrWbMode7UseT
ag
N/A N/A AMR_WB 23.05k Use Tag
ULogicalRnc
amrWbMode8UseT
ag
N/A N/A AMR_WB 23.85k Use Tag
ULogicalRnc tNnsf TNNSF TS 25.413 Tnnsf
ULogicalRnc ulLowLimNegGBR N/A N/A
Lower Limit of GBR for
Uplink Services Used for
QoS
Negotiation/Renegotiation
ULogicalRnc dlLowLimNegGBR N/A N/A
Lower Limit of GBR for
Downlink Services Used for
QoS
Negotiation/Renegotiation
ULogicalRnc negGBRLevNum N/A N/A
Negotiated GBR Level
Number Shared by Uplink
and Downlink
ULogicalRnc cdtSw N/A N/A CDT Function Switch
ULogicalRnc cdtImeiAcqSw N/A N/A CDT-IMEI Acquisition Switch
ULogicalRnc rlRefTimeAjtSw N/A N/A
Switch for RL Reference
Time Adjust During Diversity
Mode
ULogicalRnc hoToGsmPenTimer N/A N/A
Handover to GSM Penalty
Timer
ULogicalRnc compMdCfgStra N/A N/A
Compressed Mode
Configuration Strategy
ULogicalRnc rncPsHoLteSw N/A N/A
RNC Switch for PS
Handover with LTE
ULogicalRnc rncSrvccSw N/A N/A RNC SRVCC Switch
ULogicalRnc nAmrInitialRate N/A N/A
Narrow-Band AMR Initial
Data Rate for High Cell Load
ULogicalRnc wAmrInitialRate N/A N/A
Wide-Band AMR Initial Data
Rate for High Cell Load
ULogicalRnc csNullNri N/A N/A
Special Network Resource
Identifier in CS Domain
ULogicalRnc psNullNri N/A N/A
Special Network Resource
Identifier in PS Domain
ULogicalRnc thpThresh N/A N/A THP Segment Threshold
ULogicalRnc ulRateAdjLevNum N/A N/A
Uplink Rate Adjustment
Level Number
ULogicalRnc ulRateAdjLev N/A N/A
Uplink Rate Adjustment
Level
ULogicalRnc dlRateAdjLevNum N/A N/A
Downlink Rate Adjustment
Level Number
ULogicalRnc dlRateAdjLev N/A N/A
Downlink Rate Adjustment
Level
ULogicalRnc refUDrbcProfile N/A N/A
Used Dynamic Radio Bearer
Control Information Profile
ULogicalRnc amrOverHspaSwch N/A N/A
Switch of CS voice over
HSPA
ULogicalRnc drbcSwch N/A N/A DRBC Method Switch
ULogicalRnc ettiTraffVolSwch N/A N/A
Switch of E-TTI Switching
Triggered by User Plane
Throughput Measurement
ULogicalRnc dlPwrDasf N/A N/A
Switch for DL DCH Rate
Adjustment Based on D-TCP
ULogicalRnc ulPwrDasf N/A N/A
Switch for UL DCH Rate
Adjustment Based on UE
Transmission Power
ULogicalRnc rfach N/A N/A
Downlink Maximum Rate
Threshold of I/B Service on
CELL_FACH
ULogicalRnc rrach N/A N/A
Uplink Maximum Rate
Threshold of I/B Service on
RACH
ULogicalRnc dchAdjRateSwch N/A N/A
Switch for DCH Rate
Adjustment Based on Traffic
Volume Measurement
ULogicalRnc iBChQSwch N/A N/A
HS/D->D/D or HS/E->D/D
Based on Quality
Measurement Switch for I/B
Traffic
ULogicalRnc sChQSwch N/A N/A
HS/D->D/D or HS/E->D/D
Based on Quality
Measurement Switch for S
Traffic
ULogicalRnc cRateThrd N/A N/A
C Traffic Rate Threshold
Used for Determining NRT
PS Rate Upper Limit
ULogicalRnc ulPsRateLmtLowC N/A N/A
NRT PS Traffic Uplink Rate
Upper Limit When Low Rate
C Traffic+ PS Traffic
ULogicalRnc dlPsRateLmtLowC N/A N/A
NRT PS Traffic Downlink
Rate Upper Limit When Low
Rate C Traffic+ PS Traffic
ULogicalRnc ulPsRateLmtHighC N/A N/A
NRT PS Traffic Uplink Rate
Upper Limit When High Rate
C Traffic+ PS Traffic
ULogicalRnc dlPsRateLmtHighC N/A N/A
NRT PS Traffic Downlink
Rate Upper Limit When High
Rate C Traffic+ PS Traffic
ULogicalRnc srbOnEdchSwch N/A N/A
Switch of supporting SRB on
E-DCH
ULogicalRnc cChQSwch N/A N/A
Quality Measurement Switch
for VoIP/ CS Voice
ULogicalRnc initialRateUl N/A N/A Initial Rate of UL DCH
ULogicalRnc initialRateDl N/A N/A Initial Rate of DL DCH
ULogicalRnc dchSig68Swch N/A N/A
Switch of 6.8kbps Signaling
Using on DCH
ULogicalRnc csPlusPsSwch N/A N/A
Switch of PS Service
Channel Allocation for
Concurrent CS+PS
ULogicalRnc r6MulRabRcfgMeth N/A N/A
Online-already Service
Reconfiguration Method for
UE of Release 6 and after
Release 6 When Multi-RAB
ULogicalRnc dpiDrbcSwch N/A N/A
Switch of Dynamic Radio
Bearer Control Based on DPI
ULogicalRnc dpiQoSSwitch N/A N/A
Switch of DPI Based QoS
Algorithm
ULogicalRnc nonQchatPsRelInd N/A N/A
Non QChat RB2 Whether to
be Released Indicator When
It is no Traffic Volume
ULogicalRnc
nQchatRel4B0Time
s
N/A N/A
Event 4B0 Counter
Threshold for the Release of
Qchat UE's Non-Qchat-RB2
PS Service (Shared by
Uplink and Downlink)
ULogicalRnc naccSuppInd N/A
TS 25.331;
TS 25.413
NACC Support Indicator
ULogicalRnc
psInterSysHoSuppI
nd
N/A TS 25.413
PS Inter-System Handover
Indicator
ULogicalRnc dtmSuppInd N/A TS 25.413
Inter-System DTM Support
Indicator
ULogicalRnc wAmrSupInd N/A TS 25.331
WB-AMR Speech Support
Indicator
ULogicalRnc psConvTraSupInd N/A N/A
PS Conversational RAB for
VoIP Support Indicator
ULogicalRnc psSigForImsInd N/A TS 25.413
PS Signalling RAB for IMS
Support Indicator
ULogicalRnc srvBasedHoInd N/A N/A
Service-Based Handover
Support Indicator
ULogicalRnc ackNackEncInd N/A
TS 25.331;
TS 25.413
HSDPA HS-
DPCCHACK/NACK
enhancement Support
Indicator
ULogicalRnc nbrCellMonSupInd N/A N/A
Neighbouring Cell Monitoring
Support Indicator
ULogicalRnc fourEChAllowedInd N/A
TS 25.331;
TS 25.413
Four E-DPDCHs Allowed
Indicator
ULogicalRnc cidLcsMethodInd N/A N/A
Cell ID Positioning Support
Indicator
ULogicalRnc agpsLcsMethodInd N/A N/A AGPS Support Indicator
ULogicalRnc basedImsiHoInd N/A N/A
Handover Based on IMSI
Support Indicator
ULogicalRnc ptpOverHSInd N/A TS 25.331
MBMS PTP over HSDPA
Support Indicator
ULogicalRnc ldBsdIntSysHOInd N/A N/A
Inter System Handover with
Consideration of Gsm Load
Support Indicator
ULogicalRnc fastRecfgSptInd N/A N/A
Fast Reconfiguration
Support Indication
ULogicalRnc amrIfHoSw N/A N/A
AMR Inter Frequency
Handover Switch
ULogicalRnc amrRatHoSw N/A N/A
AMR Inter Rat Handover
Switch
ULogicalRnc r99RtIfHoSw N/A N/A
R99 RT Inter Frequency
Handover Switch
ULogicalRnc r99NrtIfHoSw N/A N/A
R99 NRT Inter Frequency
Handover Switch
ULogicalRnc r99RtRatHoSw N/A N/A
R99 RT Inter Rat Handover
Switch
ULogicalRnc r99NrtRatHoSw N/A N/A
R99 NRT Inter Rat Handover
Switch
ULogicalRnc hsdpaIfHoSw N/A N/A
HSDPA Inter Frequency
Handover Switch
ULogicalRnc hsdpaRatHoSw N/A N/A
HSDPA Inter Rat Handover
Switch
ULogicalRnc hsupaIfHoSw N/A N/A
HSUPA Inter Frequency
Handover Switch
ULogicalRnc hsupaRatHoSw N/A N/A
HSUPA Inter Rat Handover
Switch
ULogicalRnc r99RtEutraHoSw N/A N/A
R99 RT Inter Rat (EUTRAN)
Handover Switch
ULogicalRnc r99NrtEtraHoSw N/A N/A
R99 NRT Inter Rat
(EUTRAN) Handover Switch
ULogicalRnc hsdpaEutraHoSw N/A N/A
HSDPA Inter Rat (EUTRAN)
Handover Switch
ULogicalRnc hsupaEutraHoSw N/A N/A
HSUPA Inter Rat (EUTRAN)
Handover Switch
ULogicalRnc dynaUpdtPO2Sw N/A N/A Dynamic Update PO2 Switch
ULogicalRnc cs64RbModeSw N/A N/A CS 64K RB Mode Switch
ULogicalRnc dePriSwch N/A N/A Dedicated Priority Switch
ULogicalRnc
cdtNasCallNoAcqS
w
N/A N/A
CDT-NAS Call Number
Acquisition Switch
ULogicalRnc
cdtNodebStaInfoAc
qSw
N/A N/A
CDT-NodeB Statistic Info
Acquisition Switch
ULogicalRnc cdtLastSigAcqSw N/A N/A
CDT-Last Signalling
Acquisition Switch
ULogicalRnc
hoToEutraPenTime
r
N/A N/A
Handover to E-UTRAN
Penalty Timer
ULogicalRnc punishUePchSwch N/A N/A
Switch of whether to Punish
the UE that can't Camp on
PCH state
ULogicalRnc
csPlusPsR5UeSwc
h
N/A N/A
Switch of Whether to transfer
from HSDSCH to DCH for
R5 UE's "PS Setup before
CS" Concurrent Service
ULogicalRnc cdtNumThdPerRrc N/A N/A
CDT Record Number
Threshold Per RRC
Connection
ULogicalRnc
csPsSceHsToDSwc
h
N/A N/A
Switch of HS-DSCH/E-DCH
or HS-DSCH/ DCH to
DCH/DCH, Used for CS+PS
Scene
ULogicalRnc hsToDE4B0timeThr N/A N/A
Event 4B0 Counter
Threshold for HS-DSCH to
DCH, Used for CS+PS
Scene
ULogicalRnc csPsSceDchRate N/A N/A
The DCH Rate of PS
Reconfigured, Used for
CS+PS Scene
ULogicalRnc
fchPchUeCsPsSwc
h
N/A N/A
Switch of the PS Service
Channel allocation, Used for
UE in the CELL_FACH/PCH
State Triggering CS Call
ULogicalRnc dToHsDelaySwch N/A N/A
Switch of D/D->HS/D or
HS/E after HS/D or HS/E -
>D/D
ULogicalIurQos ULogicalIurQos N/A N/A
Logical Iur Link Configuration
Object ID
ULogicalIurQos refUIurLink N/A N/A Used Iur Link
ULogicalIurQos refUTbTypeProfile N/A N/A
Used Transport Bearer Type
Profile Related to Basic
Priority
ULogicalIurQos
refUDedSrvTbProfil
e
N/A N/A
Used Dedicated Service
Transport Bearer Qos Profile
UQosFunction UQosFunction N/A N/A QoS Function Object ID
UBasPri UBasPri N/A N/A
QoS Basic Configuration
Object ID
UBasPri basicPrio N/A N/A Basic Priority
UBasPri maxDlDpchPO N/A N/A
Power Offset of the
Maximum Downlink DPCH
Showing Different Basic
Priority
UBasPri maxUlDpchPO N/A N/A
Power Offset of the
Maximum Uplink DPCH
Showing Different Basic
Priority
UBasPri hspaEquHsUser N/A N/A Equivalent HSPA Users
UBasPri ulNormBitRate N/A N/A
DCH Uplink Nominal Bit
Rate
UBasPri dlNormBitRate N/A N/A
DCH Downlink Nominal Bit
Rate
UBasPri hsNormBitRate N/A N/A
HS-DSCH Downlink Nominal
Bit Rate
UBasPri edchNormBitRate N/A N/A
E-DCH Uplink Nominal Bit
Rate
UBasPriMappin
g
UBasPriMapping N/A N/A
Basic Priority Mapping
Relationship Object ID
UBasPriMappin
g
arpPL N/A N/A ARP Priority Level
UBasPriMappin
g
trafficClass N/A N/A Traffic Class
UBasPriMappin
g
basicPrio N/A N/A Basic Priority
USchPriMappin
gProfile
USchPriMappingPr
ofile
N/A N/A
Scheduling Priority Mapping
Relationship Profile Object
ID
USchPriMappin
gProfile
profileId N/A N/A Scheduling Priority Index
USchPriMappin
g
USchPriMapping N/A N/A
Scheduling Priority Mapping
Relationship Object ID
USchPriMappin
g
basicPrio N/A N/A Basic Priority
USchPriMappin
g
bearerType N/A N/A Radio Bearer Type
USchPriMappin
g
schPrio N/A N/A Scheduling Priority
UAppPriMappin
gProfile
UAppPriMappingPr
ofile
N/A N/A
Application Priority Mapping
Relationship Profile Object
ID
UAppPriMappin
gProfile
profileId N/A N/A Application Priority Index
UAppPriMappin
gProfile
intialAppPriUsingSc
ene
N/A N/A
Application Priority
Configuration Scene
UAppPriMappin
g
UAppPriMapping N/A N/A
Application Priority Mapping
Relationship Object ID
UAppPriMappin
g
basicPrio N/A N/A Basic Priority
UAppPriMappin
g
bearerType N/A N/A Radio Bearer Type
UAppPriMappin
g
direction N/A N/A
Service Direction Used in
Application Priority Mapping
UAppPriMappin
g
rateClass N/A N/A Rate Class
UAppPriMappin
g
appPri N/A N/A Application Priority
UTbTypeProfile UTbTypeProfile N/A N/A
Transport Bearer Type
Profile Related to Basic
Priority Object ID
UTbTypeProfile profileId N/A N/A
Profile ID of Transport
Bearer Type Profile Related
to Basic Priority
UTbTypeProfile
intialTransportMode
Scene
N/A N/A Transmission Mode
UTbType UTbType N/A N/A
Transport Bearer Type
Related to Basic Priority
Object ID
UTbType basicPrio N/A N/A Basic Priority
UTbType bearerType N/A N/A Radio Bearer Type
UTbType tbType N/A N/A Transport Bearer Type
UTbType ipDscp N/A N/A DSCP for IP
UTbType ulResBwd N/A N/A
Uplink Reserved Bandwidth
for DCH I/B (or HSPA I/B)
Traffic
UTbType dlResBwd N/A N/A
Downlink Reserved
Bandwidth for DCH I/B (or
HSPA I/B) Traffic
UDedSrvTbProfi
le
UDedSrvTbProfile N/A N/A
Dedicated Service Transport
Bearer Qos Profile Object ID
UDedSrvTbProfi
le
profileId N/A N/A
Transport Qos Profile
parameter Index
UDedSrvTbProfi
le
intialTransportNetS
cene
N/A N/A
Initial Transport Network
Scene
UDedSrvTb UDedSrvTb N/A N/A
Dedicated Service Transport
Bearer Qos Configuration
Object ID
UDedSrvTb trafficCategory N/A N/A Traffic Category
UDedSrvTb tbType N/A N/A Transport Bearer Type
UDedSrvTb tbTypePara1 N/A N/A Transport Bearer Type 1
UDedSrvTb tbTypePara2 N/A N/A Transport Bearer Type 2
UDedSrvTb tbTypePara3 N/A N/A Transport Bearer Type 3
UDedSrvTb tbTypePara4 N/A N/A Transport Bearer Type 4
UDedSrvTb tbTypePara5 N/A N/A Transport Bearer Type 5
UDedSrvTb tbTypePara6 N/A N/A Transport Bearer Type 6
UDedSrvTb ipDscp N/A N/A DSCP for IP
UDedSrvTb iBUlResBwd N/A N/A
Uplink Reserved Bandwidth
for I/B Traffic
UDedSrvTb iBDlResBwd N/A N/A
Downlink Reserved
Bandwidth for I/B Traffic
UBPriAcProfile UBPriAcProfile N/A N/A
Access Control Profile
Related to Basic Priority
Object ID
UBPriAcProfile profileId N/A N/A Basic Priority AC Index
UBPriAcProfile intialloadscene N/A N/A Initial Load Scene
UBPriAc UBPriAc N/A N/A
Access Control Related to
Basic Priority Object ID
UBPriAc basicPrio N/A N/A
Basic Priority Used in
Admission Control
UBPriAc dchUlAcThresh N/A N/A DCH Uplink AC Threshold
UBPriAc dchDlAcThresh N/A N/A DCH Downlink AC Threshold
UBPriAc edchAcThresh N/A N/A E-DCH AC Threshold
UBPriAc hsdpaAcThresh N/A N/A HSDPA AC Threshold
UBPriAc mbmsAcThresh N/A N/A MBMS AC Threshold
UBPriAc threshRefCount N/A N/A
MBMS Load Threshold
Reference for Counting
UBPriAc codeTreeResRto N/A N/A Code Tree Reserved Ratio
UImsiSnacFilter UImsiSnacFilter N/A N/A
User Authorized
PLMN+SNAC Information
Object ID
UImsiSnacFilter
imsiMatchedDgtNu
m
N/A N/A
The Imsi Matched Digits
Num
UImsiSnacFilter imsiMatchedDigit N/A N/A The Imsi Matched Digit
UImsiSnacFilter sNACNum N/A N/A
Number of Shared Network
Code
UImsiSnacFilter sMCC
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
MCC of Shared Network
UImsiSnacFilter sMNC
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
MNC of Shared Network
UImsiSnacFilter sNAC
SNAC; Shared
Network Area
Code
TS 25.423;
TS 25.413;
TS 23.003
Shared Network Area Code
UWhiteImsiList UWhiteImsiList N/A N/A White IMSI List Object ID
UWhiteImsiList whiteImsiNo N/A N/A The Index of White IMSI List
UWhiteImsiList imsiDgtNum N/A N/A
IMSI Digits Number in White
List for User Identification
UWhiteImsiList imsiDgt N/A N/A
IMSI High-bit Digits in white
List for User Identification
UWhiteImsiList vipInd N/A N/A VIP Indication
UWhiteImsiList basicPrio N/A N/A
Basic Priority for User in
White List
UWhiteImsiList hspaSchPrio N/A N/A
HSPA Scheduling Priority for
User in White List
UWhiteImsiList cgtSchPrio N/A N/A
Congestion Scheduling
Priority for User in White List
UWhiteImsiList appPri N/A N/A
Application Priority for User
in White List
UWhiteImsiList vipCsReDelayTimer N/A N/A
Timer of Relocation Delay for
VIP's CS Service
UWhiteImsiList vipPsReDelayTimer N/A N/A
Timer of Relocation Delay for
VIP's PS Service
USnac USnac N/A N/A
LAC and SNAC Information
Object ID
USnac snac
SNAC; Shared
Network Area
Code
TS 25.423;
TS 25.413;
TS 23.003
Shared Network Area Code
USnac refULocationArea
LAC; Location
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Used Location Area
UUeCnst UUeCnst N/A N/A
UE Timers and Constants
Information Object ID
UUeCnst t300 T300 TS 25.331
Waiting Time After UE
Sending RRC
CONNECTION REQUEST
Message (T300)
UUeCnst n300 N300 TS 25.331
Maximum Number of
Retransmissions of the RRC
CONNECTION REQUEST
Message (N300)
UUeCnst t312Idle T312 TS 25.331
Waiting Time for Receiving
"In Sync" from L1 in Idle
Mode (T312 in Idle Mode)
UUeCnst n312Idle N312 TS 25.331
Maximum Number of "In
Sync" Received from L1 in
Idle Mode (N312 in Idle
Mode)
UUeCnst t302 T302 TS 25.331
Waiting Time After UE
Sending CELL/URA
UPDATE Message (T302)
UUeCnst n302 N302 TS 25.331
Maximum Number of
Retransmissions of the
CELL/URA UPDATE
Message (N302)
UUeCnst t304 T304 TS 25.331
Waiting Time After UE
Sending UE CAPABILITY
INFORMATION Message
(T304)
UUeCnst n304 N304 TS 25.331
Maximum Number of
Retransmissions of the UE
CAPABILITY INFORMATION
Message (N304)
UUeCnst t305 T305 TS 25.331
Period of Cell/URA Update
When UE is in
CELL_FACH/CELL_PCH/
URA_PCH State (T305)
UUeCnst t307 T307 TS 25.331
Waiting Time for Cell
Reselection After UE is out
of Service (T307)
UUeCnst t308 T308 TS 25.331
Waiting Time After Sending
RRC CONNECTION
RELEASE COMPLETE
Message in CELL_DCH
State (T308)
UUeCnst t309 T309 TS 25.331
Waiting Time After
Requesting Connection
Establishment in Other
System (eg. GSM) (T309)
UUeCnst t312Connected T312 TS 25.331
Waiting Time for Receiving
"In Sync" from L1 in
Connected Mode (T312 in
Connected Mode)
UUeCnst n312Connected N312 TS 25.331
Maximum Number of "In
Sync" Received from L1 in
Connected Mode (N312 in
Connected Mode)
UUeCnst t313 T313 TS 25.331
Waiting Time After DPCCH
Established in CELL_DCH
State Losing Synchronization
(T313)
UUeCnst n313 N313 TS 25.331
Maximum Number of
Successive "Out of Sync"
Received from L1 (N313)
UUeCnst t314 T314 TS 25.331
Waiting Time for Completion
of Cell Update When Radio
Link Fails and Radio Bearer
(s) Associated with T314
Exist (T314)
UUeCnst t315 T315 TS 25.331
Waiting Time for Completion
of Cell Update When Radio
Link Fails and Radio Bearer
(s) Associated with T315
Exist (T315)
UUeCnst n315 N315 TS 25.331
Maximum Number of
Successive "In Sync"
Received from L1 During
T313 is Activated (N315)
UUeCnst t316 T316 TS 25.331
Waiting Time for Cell
Selection/Reselection After
UE is out of Service in
CELL_PCH/URA_PCH State
(T316)
UUeCnst t323Swch N/A TS 25.331 Switch of T323 Broadcasting
UUeCnst t323 T323 TS 25.331
Waiting Time of UE Sending
message SIGNALING
CONNECTION RELEASE
INDICATION (with Cause)
(T323)
UCnInfo UCnInfo N/A N/A
CN NAS System Information
Object ID
UCnInfo cnDomain N/A N/A CN Domain Supported
UCnInfo attIndCs ATT TS 24.008
IMSI Attach and Detach
Indicator
UCnInfo nmoPs NMO TS 24.008 Network Mode of Operation
UCnInfo t3212Cs T3212 TS 24.008
Timer for Periodic Location
Update (T3212)
UCnInfo kcs
CN domain
specific DRX
cycle length
coefficient
TS 25.331
CS Domain DRX Cycle
Length Coefficient
UCnInfo kps
CN domain
specific DRX
cycle length
coefficient
TS 25.331
PS Domain DRX Cycle
Length Coefficient
UCnInfo mbmsModPrdCoeff
Modification
period
coefficient;
Modification
Period
TS 25.331;
TS 25.433;
TS25.346
Modification Period
Coefficient for MBMS
UIuCnst UIuCnst N/A N/A
Iu Interface Timers and
Constants Information Object
ID
UIuCnst tRelocprep TRELOCprep TS 25.413
SRNC Wait Time for
Relocation Preparation
UIuCnst tRelocoverall TRELOCoverall TS 25.413
SRNC Overall Protective
Time for Relocation
UIuCnst tQueuing N/A N/A
Maximum Time for RAB
Queuing in RNC
UIuCnst tDatafwd TDATAfwd TS 25.413
Start time to send the
forwarded PDCP SDUs in
the target RNC during
relocation of SRNS
UIuCnst tRafc TRafC TS 25.413
Maximum Waiting Time for
RESET in RNC
UIuCnst tRatc TRatC TS 25.413
Timer Before Sending
RESET Response to CN
UIuCnst tResetDelay N/A N/A
Timer for Sending
RESOURCE RESET
Response to CN
UIuCnst tResetwait N/A N/A
Timer forRESOURCE
RESET Response from CN
UIuCnst tigOR TigOR TS 25.413
Timer for Ignoring all
OVERLOAD Messages or
Signalling Point Congested
Information (TigOR)
UIuCnst tinTR TinTR TS 25.413
Timer for Not Allowing to
Increase Traffic (TinTR)
UIuCnst nRepeatresrst N/A N/A
Maximum Number of
Retransmissions of the
RESOURCE RESET
Message
UIuCnst nRepeatrst N/A N/A
Maximum Number of
Retransmissions of the
RESET Message
UDrbcProfile UDrbcProfile N/A N/A
Dynamic Radio Bearer
Control Information Profile
Object ID
UDrbcProfile profileId N/A N/A
Drbc Strategy Configuration
Index
UDrbcProfile drbcStragyName N/A N/A Drbc Strategy Name
UDrbc UDrbc N/A N/A
Dynamic Radio Bearer
Control Information Object ID
UDrbc dxHsBo0E4bThd N/A N/A
Event 4B Counter Threshold
for HSPA Using DTX/DRX or
CELL_FACH using DRX to
PCH or IDLE Shared by
Uplink and Downlink
UDrbc fachE4aThd N/A N/A
Event 4A Counter Threshold
for CELL_FACH to
CELL_DCH Shared by
Uplink and Downlink
UDrbc dchE4aThd N/A N/A
Event 4A Counter Threshold
for Increasing Rate on DCH
or DCH->HSPA
UDrbc dchE4bThd N/A N/A
Event 4B Counter Threshold
for Decreasing Rate on DCH
UDrbc dToPchThd N/A N/A
Event 4B Counter Threshold
for CELL_DCH to PCH
Shared by Uplink and
Downlink
UDrbc fToPchThd N/A N/A
Event 4B Counter Threshold
for CELL_FACH without
DRX to PCH Shared by
Uplink and Downlink
UDrbc dToIdleThd N/A N/A
Event 4B Counter Threshold
for CELL_DCH to Idle
Shared by Uplink and
Downlink
UDrbc fToIdleThd N/A N/A
Event 4B Counter Threshold
for CELL_FACH without
DRX to Idle Shared by Uplink
and Downlink
UDrbc pchHoldTimeThr N/A N/A
Time Threshold for
CELL_PCH or URA_PCH to
Idle
UDrbc dToFachThd N/A N/A
Event 4B Counter Threshold
for Cell_Dch to Cell_FACH
UDrbc ettiEaThd N/A N/A
Event 4A Counter Threshold
for E-TTI Switching from
10ms to 2ms
UDrbc ettiEbThd N/A N/A
Event 4B Counter Threshold
for E-TTI Switching from 2ms
to 10ms
UDrbc dtcpEaThd N/A N/A
Event A Counter Threshold
for PS on DL DCH or DL
AMR Decreasing Rate on D-
TCP
UDrbc dtcpEbThd N/A N/A
Event B Counter Threshold
for Restriction PS Increasing
Rate on DL DCH or
Triggering DL AMR
Increasing Rate Based on D-
UDrbc fachSwch N/A N/A
Switch of Transferring to
CELL_FACH
UDrbc pchSwch N/A N/A
Switch of
URA_PCH/CELL_PCH
Support
UDrbc deltaNumE4B0Thd N/A N/A
Increment Times of Event
4B0 for UE Which is not
sensitive for Battery
Consumption Transferred to
URA_PCH/CELL_PCH or
UDrbc dtxdrxToFachThd N/A N/A
Event 4B Counter Threshold
for Cell_Dch to Cell_FACH
for UE Using Dtx/Drx
UGloAc UGloAc N/A N/A
Global Access Control
Information Object ID
UGloAc qLength N/A N/A True Queue Length
UGloAc tTrueQ N/A N/A
Time of True Queue for
Congested Service in RAB
Setup Process
UGloAc tTrueQReloc N/A N/A
Time of True Queue for
Congested Service
Relocating into UTRAN
UGloAc tTrueQForced N/A N/A
Maximum Time in the True
Queue when Service be
Forced into Queue
UGloAc amrDnRateAcSwch N/A N/A
Switch of AMR Traffic Re-
admission after AMR Rate
Decrease
UGloAc forcQueSwiAMR N/A N/A
Forced Queue Switch for
AMR Service
UGloAc forcQueSwiCS64 N/A N/A
Forced Queue Switch for CS
64kbps service
UHspa UHspa N/A N/A
Hspa Configuration Object
ID
UHspa rncFdpchSupInd N/A N/A
RNC F-DPCH Support
Indicator
UHspa rncEfdpchSupInd N/A N/A
RNC Enhanced F-DPCH
Support Indicator
UHspa rncMimo64QamInd N/A N/A
RNC MIMO and DL64QAM
Combined Capability
Support Indicator
UHspa codeReAssInd N/A N/A
DPCH Code Re-Assign
Support Indicator
UHspa codeReAssPrd N/A N/A
DPCH Code Re-Assign
Period
UHspa dtxDrxSwch N/A N/A DTX/DRX Switch
UHspa rtDtxSwch N/A N/A DTX Switch for Speech
UHspa nrtDtxSwch N/A N/A DTX Switch for NRT
UHspa rtDrxSwch N/A N/A DRX Switch for Speech
UHspa nrtDrxSwch N/A N/A DRX Switch for NRT
UHspa hsscLessSwch N/A N/A HS-SCCH Less Switch
UHspa nvHsscLessSwch N/A N/A
HS-SCCH Less Switch for
Non-VoIP/AMR
UHspa rncDlEnL2Ind N/A N/A
RNC Downlink Enhanced
Layer 2 Support Indicator
UHspa rncUlEnL2Ind N/A N/A
RNC Uplink Enhanced Layer
2 Support Indicator
UHspa rnc64QAMInd N/A N/A
RNC 64QAM Support
Indicator
UHspa rncMIMOInd N/A N/A
RNC MIMO Support
Indicator
UHspa hsGBRLimitSwi N/A N/A
Switch for Limiting HSDPA
GBR Resource Consumption
UHspa rlcSizeSuptType N/A N/A
Support Type of Downlink
RLC Flexible PDU Size
Format
UHspa ulRlcSizeSptType N/A N/A
Support Type of Uplink RLC
Flexible PDU Size Format
UHspa rncDcMimoSupInd N/A N/A
RNC DC+MIMO Support
Indicator
UHspa dcHsdschSptInd N/A N/A
Dual-Cell HS-DSCH Support
Indication
UHspa poEhichSerRls2 N/A N/A
Power Offset Relative to E-
HICH in Single Link
Condition for E-HICH of
Serving RLS in Macro
Diversity Condition (2ms TTI)
UHspa poEhichSerRls10 N/A N/A
Power Offset Relative to E-
HICH in Single Link
Condition for E-HICH of
Serving RLS in Macro
Diversity Condition (10ms
UHspa poEhichNoSerRl2 N/A N/A
Power Offset Relative to E-
HICH in Single Link
Condition for E-HICH of Non-
serving RLS in Macro
Diversity Condition (2ms TTI)
UHspa poEhichNoSerRl10 N/A N/A
Power Offset Relative to E-
HICH in Single Link
Condition for E-HICH of Non-
serving RLS in Macro
Diversity Condition (10ms
UHspa poErgchSerRls2 N/A N/A
Power Offset Relative to E-
RGCH in Single Link
Condition for E-RGCH of
Serving RLS in Macro
Diversity Condition (2ms TTI)
UHspa poErgchSerRls10 N/A N/A
Power Offset Relative to E-
RGCH in Single Link
Condition for E-RGCH of
Serving RLS in Macro
Diversity Condition (10ms
UHspa poErgchNonSerRls N/A N/A
Power Offset Relative to
10ms TTI E-RGCH in Single
Link Condition for E-RGCH
of Non-serving RLS in Macro
Diversity Condition
UHspa eagchPOUptSwch N/A N/A
Dynamic Updating Switch of
E-AGCH Power Offset
UHspa hsupaCtrChUptPrd N/A N/A
HSUPA Control Channel
Number Update Period
UHspa event1fHsInd N/A N/A
Indicator for Whether to
Judge Event 1F Condition
When the Service is Setup
on HSPA
UHspa edpcchPOTti10
E-
DPCCH/DPCC
H power offset;
E-DPCCH
Power Offset
TS 25.331;
TS 25.433;
TS25.423
Quantified E-
DPCCH/DPCCH Power
Offset (10ms TTI)
UHspa edpcchPOTti2
E-
DPCCH/DPCC
H power offset;
E-DPCCH
Power Offset
TS 25.331;
TS 25.433;
TS25.423
Quantified E-
DPCCH/DPCCH Power
Offset (2ms TTI)
UHspa scheInfoPOTti2
E-DCH Power
Offset for
Scheduling Info;
Power Offset for
Scheduling Info
TS 25.433;
TS 25.331
Power Offset for Scheduling
Info (2ms TTI)
UHspa scheInfoPOTti10
E-DCH Power
Offset for
Scheduling Info;
Power Offset for
Scheduling Info
TS 25.433;
TS 25.331
Power Offset for Scheduling
Info (10ms TTI)
UHspa ackPwrOffset
ACK Power
Offset
TS 25.433;
TS 25.423
HS-DPCCH ACK Power
Offset for Single Radio Link
or Intra-NodeB Handover
UHspa anackRepFactor
ACK-NACK
Repetition
Factor
TS 25.433;
TS 25.423
ACK-NACK Repetition
Factor
UHspa nackPwrOffset
NACK Power
Offset
TS 25.433;
TS 25.423
HS-DPCCH NACK Power
Offset for Single Radio Link
or Intra-NodeB Handover
UHspa cqiCycle
CQI Feedback
Cycle k
TS 25.433;
TS 25.423
CQI Feedback Cycle
UHspa cqiPwrOffset
CQI Power
Offset
TS 25.433;
TS 25.423
HS-DPCCH CQI Power
Offset for Single Radio Link
or Intra-NodeB Handover
UHspa cqiRepFactor
CQI Repetition
Factor
TS 25.433;
TS 25.423
CQI Repetition Factor
UHspa edchRefPO
E-DCH
Reference
Power Offset
TS 25.433;
TS 25.423
E-DCH Reference Power
Offset
UHspa tpcErrTarget N/A N/A
TPC Command Error Rate
Target
UHspa
hsdpaCmAssoMod
e
N/A N/A
HSDPA Associate CM
Method
UHspa
hsupaCmAssoMod
e
N/A N/A
HSUPA Associate CM
Method
UHspa interAckPwrOfst
ACK Power
Offset
TS 25.433;
TS 25.423
HS-DPCCH ACK Power
Offset for Inter-NodeB
Handover
UHspa interCqiPwrOfst
CQI Power
Offset
TS 25.433;
TS 25.423
HS-DPCCH CQI Power
Offset for Inter-NodeB
Handover
UHspa interNackPwrOfst
NACK Power
Offset
TS 25.433;
TS 25.423
HS-DPCCH NACK Power
Offset for Inter-NodeB
Handover
UHspa t1d N/A N/A
Timer for Event 1D in HSPA
or MBMS
UHspa codeUptPrdUnit N/A N/A Code Update Period Unit
UHspa codeUptPrdms N/A N/A
Code Update Period
(millisecond)
UHspa codeUptPrds N/A N/A
Code Update Period
(second)
UHspa hsdschTotPwrMeth N/A N/A
HSPA Total Downlink Power
Allocation Method
UHspa hsdpaIurMBR N/A N/A
Maximum Bit Rate of HSDPA
Across Iur Interface
UCommEdch UCommEdch N/A N/A
Common EDCH
Configuration Object ID
UCommEdch edpcchPOTti10
E-
DPCCH/DPCC
H power offset;
E-DPCCH
Power Offset
TS 25.331;
TS 25.433
Quantified E-
DPCCH/DPCCH Power
Offset (10ms TTI)
UCommEdch edpcchPOTti2
E-
DPCCH/DPCC
H power offset;
E-DPCCH
Power Offset
TS 25.331;
TS 25.433
Quantified E-
DPCCH/DPCCH Power
Offset (2ms TTI)
UCommEdch scheInfoPOTti2
E-DCH Power
Offset for
Scheduling Info;
Power Offset for
Scheduling Info
TS 25.433;
TS 25.331
Power Offset for Scheduling
Info (2ms TTI)
UCommEdch scheInfoPOTti10
E-DCH Power
Offset for
Scheduling Info;
Power Offset for
Scheduling Info
TS 25.433;
TS 25.331
Power Offset for Scheduling
Info (10ms TTI)
UCommEdch ackPwrOffset
ACK Power
Offset
TS 25.433;
TS 25.331
HS-DPCCH ACK Power
Offset for Single Radio Link
or Intra-NodeB Handover
UCommEdch anackRepFactor
ACK-NACK
Repetition
Factor
TS 25.433;
TS 25.331
ACK-NACK Repetition
Factor
UCommEdch nackPwrOffset
NACK Power
Offset
TS 25.433;
TS 25.331
HS-DPCCH NACK Power
Offset for Single Radio Link
or Intra-NodeB Handover
UCommEdch cqiCycle
CQI Feedback
Cycle k
TS 25.433;
TS 25.331
CQI Feedback Cycle
UCommEdch cqiPwrOffset
CQI Power
Offset
TS 25.433;
TS 25.331
HS-DPCCH CQI Power
Offset for Single Radio Link
or Intra-NodeB Handover
UCommEdch cqiRepFactor
CQI Repetition
Factor
TS 25.433;
TS 25.331
CQI Repetition Factor
UCommEdch edchRefPO
E-DCH
Reference
Power Offset
TS 25.433
E-DCH Reference Power
Offset
UCommEdch tpcErrTarget
F-DPCH TPC
command error
rate target
TS 25.331
TPC Command Error Rate
Target
UCommEdch cEdchMultiSwi N/A N/A
Common E-DCH MAC-d
Flow Multiplexing Switch
UCommEdch ettiComEdch
E-DCH
Transmission
Time Interval; E-
TTI
TS 25.331;
TS 25.433;
TS 25.423
Common E-DCH
Transmission Time Interval
UCommEdch ulLchTypeInd N/A N/A
Logical Channel Type
Indication for Common E-
DCH MAC-d Flow
UCommEdch cEdchHarqPOTti2
E-DCH MAC-d
flow power
offset; E-DCH
HARQ Power
Offset FDD
TS 25.331;
TS 25.433;
TS 25.423
HARQ Power Offset for
Common E-DCH MAC-d
Flow (2ms TTI)
UCommEdch cEdchHarqPOTti10
E-DCH MAC-d
flow power
offset; E-DCH
HARQ Power
Offset FDD
TS 25.331;
TS 25.433;
TS 25.423
HARQ Power Offset for
Common E-DCH MAC-d
Flow (10ms TTI)
UCommEdch cEdchMaxRetrTti2
E-DCH MAC-d
flow power
offset; E-DCH
HARQ Power
Offset FDD
TS 25.331;
TS 25.433;
TS 25.423
Maximum Number of
Retransmissions for
Common E-DCH MAC-d
Flow (2ms TTI)
UCommEdch cEdchMaxRetrTti10
E-DCH MAC-d
flow power
offset; E-DCH
HARQ Power
Offset FDD
TS 25.331;
TS 25.433;
TS 25.423
Maximum Number of
Retransmissions for
Common E-DCH MAC-d
Flow (10ms TTI)
UCommEdch cEdchMaxRlcSize
Largest UL RLC
PDU size
TS 25.331
Common E-DCH Maximum
Uplink RLC PDU Size
UCommEdch cEdchMinRlcSize
Minimum UL
RLC PDU size
TS 25.331
Common E-DCH Minimum
Uplink RLC PDU Size
UCommEdch ulEfachSF N/A N/A
Spreading Factor Supported
by Uplink Enhanced
CELL_FACH
UCommEdch happyBitDelCEdch
Happy bit delay
condition
TS 25.331;
TS 25.321
Happy Bit Delay for Common
E-DCH
UGbrResLimitPr
ofile
UGbrResLimitProfil
e
N/A N/A
Limiting HSDPA GBR
Resource Consumption
Profile Object ID
UGbrResLimitPr
ofile
profileId N/A N/A
Limiting HSDPA GBR
Resource Consumption
Profile ID
UGbrResLimit UGbrResLimit N/A N/A
Limiting HSDPA GBR
Resource Consumption
Configuration Object ID
UGbrResLimit hsGBRLevNum N/A N/A
Guaranteed Bit Rate Level
Number of HSDPA Services
for Limiting HSDPA GBR
Resource Consumption
UGbrResLimit hsGBRLev N/A N/A
Guaranteed Bit Rate Levels
of HSDPA Services for
Limiting HSDPA GBR
Resource Consumption
UGbrResLimit ueHsReqPwrUplim N/A N/A
UE HS-DSCH Required
Power Upper Limit for
Limiting HSDPA GBR
Resource Consumption
UMbms UMbms N/A N/A
MBMS Configuration Object
ID
UMbms sOnPTP N/A N/A
S Traffic on PTP or PTM
Switch
UMbms bOnPTP N/A N/A
B Traffic on PTP or PTM
Switch
UMbms mbmsMinRate N/A N/A
The Minimum Rate
Threshold of the SCCPCH
Setup for MBMS
UMbms mschSptSwitch N/A N/A MSCH Supported Switch
UMbms sFreqConvSwch N/A N/A
S Traffic Frequency
Converge Switch
UMbms bFreqConvSwch N/A N/A
B Traffic Frequency
Converge Switch
UMbms pwrForSoftCom N/A N/A
SCCPCH Power Offset for
Soft Combining
UMbms pwrForSelCom N/A N/A
SCCPCH Power Offset for
Selective Combining
UMbms threshForHalfIsd N/A N/A
Threshold for Cell in Half-
island Status
UMbms threshForIsd N/A N/A
Threshold for Cell in Island
Status
UMbms dlMbmsDropSw N/A N/A
Downlink Switch for
Dropping MBMS Services
UMbms urapchCount
Connected
mode counting
scope
TS 25.331
Counting Scope for
URA_PCH
UMbms cellpchCount
Connected
mode counting
scope
TS 25.331
Counting Scope for
Cell_PCH
UMbms cellfachCount
Connected
mode counting
scope
TS 25.331
Counting Scope for
Cell_FACH
UMbms pThreUENum N/A N/A
UE Number Threshold for
PTP and PTM Switch
UMbms t318 T318 TS 25.331
Waiting Time for RRC
CONNECTION SETUP
Message When MBMS is
Used (T318)
UMbms mbmsIubMultSwch N/A N/A
MBMS Iub Transport Bearer
Multiplex Switch
UDtxDrxProfile UDtxDrxProfile N/A N/A
UE DTX/DRX Profile Object
ID
UDtxDrxProfile profileId N/A N/A
UE DTX/DRX Configuration
Index
UDtxDrx UDtxDrx N/A N/A
UE DTX/DRX Configuration
Object ID
UDtxDrx dtxCyc1Tti2 UE DTX cycle 1
TS 25.331;
TS 25.423;
TS 25.433
UE DTX Cycle 1 for 2ms TTI
UDtxDrx dtxCyc1Tti10 UE DTX cycle 1
TS 25.331;
TS 25.423;
TS 25.433
UE DTX Cycle 1 for 10ms
TTI
UDtxDrx dtxCyc2Tti2 UE DTX cycle 2
TS 25.331;
TS 25.423;
TS 25.433
UE DTX Cycle 2 for 2ms TTI
UDtxDrx dtxCyc2Tti10 UE DTX cycle 2
TS 25.331;
TS 25.423;
TS 25.433
UE DTX Cycle 2 for 10ms
TTI
UDtxDrx macDtxCycTti2 MAC DTX Cycle
TS 25.331;
TS 25.423;
TS 25.433
MAC DTX Cycle for 2ms TTI
UDtxDrx macDtxCycTti10 MAC DTX Cycle
TS 25.331;
TS 25.423;
TS 25.433
MAC DTX Cycle for 10ms
TTI
UDtxDrx dtxCyc2InactTrd2
Inactivity
Threshold for
UE DTX cycle 2
TS 25.331;
TS 25.423;
TS 25.433
Inactivity Threshold for UE
DTX Cycle 2 for 2ms TTI
UDtxDrx dtxCyc2InactTrd10
Inactivity
Threshold for
UE DTX cycle 2
TS 25.331;
TS 25.423;
TS 25.433
Inactivity Threshold for UE
DTX Cycle 2 for 10ms TTI
UDtxDrx dtxLongPreLegth
UE DTX long
preamble length
TS 25.331;
TS 25.423;
TS 25.433
UE DTX Long Preamble
Length
UDtxDrx macInactThresh
MAC Inactivity
Threshold
TS 25.331;
TS 25.423;
TS 25.433
MAC Inactivity Threshold
UDtxDrx cqiDtxTimer CQI DTX Timer
TS 25.331;
TS 25.423;
TS 25.433
CQI DTX Timer
UDtxDrx dpcchBurst1
UE DPCCH
burst_1
TS 25.331;
TS 25.423;
TS 25.433
UE DPCCH Burst_1
UDtxDrx dpcchBurst2
UE DPCCH
burst_2
TS 25.331;
TS 25.423;
TS 25.433
UE DPCCH Burst_2
UDtxDrx drxCycle UE DRX cycle
TS 25.331;
TS 25.423;
TS 25.433
UE DRX Cycle
UDtxDrx drxCycInactTrd
Inactivity
Threshold for
UE DRX cycle
TS 25.331;
TS 25.423;
TS 25.433
Inactivity Threshold for UE
DRX Cycle
UDtxDrx grantMonInactTrd
Inactivity
Threshold for
UE Grant
Monitoring
TS 25.331;
TS 25.423;
TS 25.433
Inactivity Threshold for UE
Grant Monitoring
UDtxDrx drxGrantMon
UE DRX Grant
Monitoring
TS 25.331;
TS 25.423;
TS 25.433
UE DRX Grant Monitoring
USrvPcProfile USrvPcProfile N/A N/A
Power Control Profile
Related to Service Object ID
USrvPcProfile profileId N/A N/A
Service Related Power
Control Profile ID
USrvPcProfile intialloadscene N/A N/A Initial Load Scene
USrvPc USrvPc N/A N/A
Power Control Related to
Service Object ID
USrvPc srvType N/A N/A Sub-service Type
USrvPc ulIlPcAlg
Power Control
Algorithm
TS 25.331
Uplink Inner Loop Power
Control Algorithm
USrvPc tpcStepSize TPC step size TS 25.331
Step Size of Uplink Inner
Loop Power Control
USrvPc ulSirTargUpStep N/A N/A
Uplink SIR Target Up Step
Size
USrvPc ulSirTargDnStep N/A N/A
Uplink SIR Target Down
Step Size
USrvPc maxSirTargDnStep N/A N/A
Uplink SIR Target Maximum
Down Step Size
USrvPc maxSirTargUpStep N/A N/A
Uplink SIR Target Maximum
Up Step Size
USrvPc tpcDlStep
FDD TPC
Downlink Step
Size;
TS 25.433;
TS 25.423
Step Size of Downlink Inner
Loop Power Control
USrvPc blerTarget
BLER Quality
value; BLER
TS 25.331;
TS25.423
BLER Target
USrvPc errorThresh N/A N/A
Error Transport Block
Number Threshold
USrvPc blerAccpPeriod N/A N/A Tolerance BLERPeriod
USrvPc thrHarqFailTti2 N/A N/A
Threshold of HARQ Failure
Indication Number to Adjust
SIR Target Upward (2ms E-
TTI)
USrvPc thrHarqFailTti10 N/A N/A
Threshold of HARQ Failure
Indication Number to Adjust
SIR Target Upward (10ms E-
TTI)
USrvPc nhrThrUpTti10 N/A N/A
NHR Threshold to Adjust
SIR Target Upward (10ms E-
TTI)
USrvPc nhrThrDownTti10 N/A N/A
NHR Threshold to Adjust
SIR Target Downward (10ms
E-TTI)
USrvPc nhrThrUpTti2 N/A N/A
NHR Threshold to Adjust
SIR Target Upward (2ms E-
TTI)
USrvPc nhrThrDownTti2 N/A N/A
NHR Threshold to Adjust
SIR Target Downward (2ms
E-TTI)
USrvPc
upThrSampNumTti
10
N/A N/A
Threshold of Sample
Number to Adjust SIR Target
Upward (10ms E-TTI)
USrvPc
dwThrSampNumTti
10
N/A N/A
Threshold of Sample
Number to Adjust SIR Target
Downward (10ms E-TTI)
USrvPc
upThrSampNumTti
2
N/A N/A
Threshold of Sample
Number to Adjust SIR Target
Upward (2ms E-TTI)
USrvPc
dwThrSampNumTti
2
N/A N/A
Threshold of Sample
Number to Adjust SIR Target
Downward (2ms E-TTI)
USrvPc qePhyBerTarNorm N/A N/A
Physical Channel BER
Target For Normal Mode
USrvPc qePhyBerTarSil N/A N/A
Physical Channel BER
Target For Silent Mode
USrvPc qeCntThres N/A N/A
The Number Threshold of
Physical Channel BER Less
Than or Equal BER Target
USrvPc berErrorTbThresh N/A N/A
Error Transport Block
Number Threshold for BER
Target Adjust in Fast OLPC
SIR Target Downward
Adjustment Based on BER
USrvPc berTbThresh N/A N/A
Transport Block Number
Threshold for BER Target
Adjust in Fast OLPC SIR
Target Downward
Adjustment Based on BER
USrvPc berTargDnStep N/A N/A
BER Target Down Step Size
in Fast OLPC SIR Target
Downward Adjustment
Based on BER
USrvPc berTargUpStep N/A N/A
BER Target Up Step Size in
Fast OLPC SIR Target
Downward Adjustment
Based on BER
USrvPc swchAdaptiveStep N/A N/A
Uplink Outer Loop PC SIR
Target Adaptive Down Step
Size Switch
USrvPc maxBerTarget N/A N/A
Maximum BER Target in
Fast OLPC SIR Target
Downward Adjustment
Based on BER
USrvPc minBerTarget N/A N/A
Minimum BER Target in Fast
OLPC SIR Target Downward
Adjustment Based on BER
USrvPc ulOlPcQESwchSil N/A N/A
Uplink Outer Loop PC QE
Switch For Silent Mode
USrvPc edchHarqPOFdd
E-DCH MAC-d
flow power
offset; E-DCH
HARQ Power
Offset FDD
TS 25.331;
TS 25.433;
TS25.423
E-DCH HARQ Power Offset
FDD
USrvPc addiSIRDownStep N/A N/A
Additional SIR Target Down
Step Size
USrvPc ulSirStep N/A N/A
Uplink SIR Target Up Step
Size for R99
USrvPc ulSirStepTti2 N/A N/A
Uplink SIR Target Up Step
Size for HSUPA (2ms E-TTI)
USrvPc ulSirStepTti10 N/A N/A
Uplink SIR Target Up Step
Size for HSUPA (10ms E-
TTI)
USrvPc targetRetranNum N/A N/A
Target Number of HARQ
Retransmission
USrvPc fpTargErrorTti2 N/A N/A
Target Rate of Error Frame
(2ms E-TTI)
USrvPc fpTargErrorTti10 N/A N/A
Target Rate of Error Frame
(10ms E-TTI)
USrvPc berTargetUpThres N/A N/A BER Target Up Threshold
USrvPc berTargetDnThres N/A N/A BER Target Down Threshold
USrvPc timWinSize N/A N/A Time Window Size
USrvPc ttiNumThreshOpen N/A N/A
TTI threshold of Opening
BER Algorithm
USrvPc ttiNumThreshCls N/A N/A
TTI threshold of Closing BER
Algorithm
USrvPc berCntThres N/A N/A
The Number Threshold of
Trigging SIRtarget
Adjustment
USrvPc olPCPrioSwitch N/A N/A
Priority Outer Loop PC
Switch
UWhiteSrvPc UWhiteSrvPc N/A N/A
Power Control Related to
Service Object ID
UWhiteSrvPc srvType N/A N/A Sub-service Type
UWhiteSrvPc ulSirTargUpStep N/A N/A
Uplink SIR Target Up Step
Size
UWhiteSrvPc ulSirTargDnStep N/A N/A
Uplink SIR Target Down
Step Size
UWhiteSrvPc maxSirTargDnStep N/A N/A
Uplink SIR Target Maximum
Down Step Size
UWhiteSrvPc maxSirTargUpStep N/A N/A
Uplink SIR Target Maximum
Up Step Size
UWhiteSrvPc swchAdaptiveStep N/A N/A
Uplink Outer Loop PC SIR
Target Adaptive Down Step
Size Switch
UWhiteSrvPc maxDlDpchPwr
Maximum DL
Power;
Maximum DL
TX Power
TS 25.433;
TS25.423
DPCH Maximum DL Power
UWhiteSrvPc minDlDpchPwr
Minimum DL
Power
TS 25.433;
TS25.423
DPCH Minimum DL Power
UWhiteSrvPc dpcchPilotEbN0 N/A N/A DPCCH Pilot Field Eb/N0
UWhiteSrvPc maxUlDpchPwr
Maximum
allowed UL TX
power;
Maximum
Allowed UL Tx
TS 25.331;
TS25.423
Maximum Allowed Uplink
DPCH Transmission Power
UWhiteSrvPc ulInitSIR UL SIR Target
TS 25.433;
TS25.423
Uplink Initial SIR Target
UWhiteSrvPc ulMaxSIR
Maximum
Uplink SIR
TS25.423 Maximum Uplink SIR Target
UWhiteSrvPc ulMinSIR
Minimum Uplink
SIR
TS25.423 Minimum Uplink SIR Target
UWhiteSrvPc blerTarget
BLER Quality
value; BLER
TS 25.331;
TS25.423
BLER Target
UWhiteSrvPc errorThresh N/A N/A
Error Transport Block
Number Threshold
UWhiteSrvPc blerAccpPeriod N/A N/A Tolerance BLERPeriod
UWhiteSrvPc thrHarqFailTti10 N/A N/A
Threshold of HARQ Failure
Indication Number to Adjust
SIR Target Upward (10ms E-
TTI)
UWhiteSrvPc thrHarqFailTti2 N/A N/A
Threshold of HARQ Failure
Indication Number to Adjust
SIR Target Upward (2ms E-
TTI)
UWhiteSrvPc nhrThrDownTti10 N/A N/A
NHR Threshold to Adjust
SIR Target Downward (10ms
E-TTI)
UWhiteSrvPc nhrThrUpTti10 N/A N/A
NHR Threshold to Adjust
SIR Target Upward (10ms E-
TTI)
UWhiteSrvPc
upThrSampNumTti
10
N/A N/A
Threshold of Sample
Number to Adjust SIR Target
Upward (10ms E-TTI)
UWhiteSrvPc
dwThrSampNumTti
10
N/A N/A
Threshold of Sample
Number to Adjust SIR Target
Downward (10ms E-TTI)
UWhiteSrvPc nhrThrDownTti2 N/A N/A
NHR Threshold to Adjust
SIR Target Downward (2ms
E-TTI)
UWhiteSrvPc nhrThrUpTti2 N/A N/A
NHR Threshold to Adjust
SIR Target Upward (2ms E-
TTI)
UWhiteSrvPc
upThrSampNumTti
2
N/A N/A
Threshold of Sample
Number to Adjust SIR Target
Upward (2ms E-TTI)
UWhiteSrvPc
dwThrSampNumTti
2
N/A N/A
Threshold of Sample
Number to Adjust SIR Target
Downward (2ms E-TTI)
UWhiteSrvPc ulOlPcQESwchSil N/A N/A
Uplink Outer Loop PC QE
Switch For Silent Mode
UWhiteSrvPc qePhyBerTarSil N/A N/A
Physical Channel BER
Target For Silent Mode
UWhiteSrvPc qeCntThres N/A N/A
The Number Threshold of
Physical Channel BER Less
Than or Equal BER Target
UWhiteSrvPc edchHarqPOFDD
E-DCH MAC-d
flow power
offset; E-DCH
HARQ Power
Offset FDD
TS 25.331;
TS 25.433;
TS25.423
E-DCH HARQ Power Offset
FDD
UWhiteSrvPc addiSIRDownStep N/A N/A
Additional SIR Target Down
Step Size
UWhiteSrvPc initBlerSIR N/A N/A
Initial Value for BLER Based
SIR Target
UWhiteSrvPc initSirAdd N/A N/A
Initial Value for Additional
SIR Target
UWhiteSrvPc ulSirStep N/A N/A
Uplink SIR Target Up Step
Size for R99
UWhiteSrvPc ulSirStepTti2 N/A N/A
Uplink SIR Target Up Step
Size for HSUPA (2ms E-TTI)
UWhiteSrvPc ulSirStepTti10 N/A N/A
Uplink SIR Target Up Step
Size for HSUPA (10ms E-
TTI)
UWhiteSrvPc targetRetranNum N/A N/A
Target Number of HARQ
Retransmission
UWhiteSrvPc fpTargErrorTti2 N/A N/A
Target Rate of Error Frame
(2ms E-TTI)
UWhiteSrvPc fpTargErrorTti10 N/A N/A
Target Rate of Error Frame
(10ms E-TTI)
UWhiteSrvPc berTargetUpThres N/A N/A BER Target Up Threshold
UWhiteSrvPc berTargetDnThres N/A N/A BER Target Down Threshold
UWhiteSrvPc berCntThres N/A N/A
The Number Threshold of
Trigging SIRtarget
Adjustment
USrvDivPc USrvDivPc N/A N/A
Power Control Related to
Service and Diversity Mode
Object ID
USrvDivPc txDivMod
Diversity Mode;
Transmit
Diversity
Indicator
TS 25.433;
TS 25.423;
TS25.211
Transmit Diversity Mode
USrvDivPc maxDlDpchPwr
Maximum DL
Power;
Maximum DL
TX Power
TS 25.433;
TS 25.423
DPCH Maximum DL Power
USrvDivPc minDlDpchPwr
Minimum DL
Power
TS 25.433;
TS 25.423
DPCH Minimum DL Power
USrvDivPc dpchPO1 PO1
TS 25.433;
TS 25.423
DPCH PO1
USrvDivPc dpchPO2 PO2
TS 25.433;
TS 25.423
DPCH PO2
USrvDivPc dpchPO3 PO3
TS 25.433;
TS 25.423
DPCH PO3
USrvDivPc dpcchPilotEbN0 N/A N/A DPCCH Pilot Field Eb/N0
USrvDivPc maxUlDpchPwr
Maximum
allowed UL TX
power;
Maximum
Allowed UL Tx
TS 25.331;
TS25.423
Maximum Allowed Uplink
DPCH Transmission Power
USrvDivPc ulInitSIR UL SIR Target
TS 25.433;
TS 25.423
Uplink Initial SIR Target
USrvDivPc ulMaxSIR
Maximum
Uplink SIR
TS25.423 Maximum Uplink SIR Target
USrvDivPc ulMinSIR
Minimum Uplink
SIR
TS25.423 Minimum Uplink SIR Target
USrvDivPc eagchPOTti2
E-AGCH Power
Offset
TS 25.433;
TS 25.423
E-AGCH Power Offset for
TTI 2ms
USrvDivPc eagchPOTti10
E-AGCH Power
Offset
TS 25.433;
TS 25.423
E-AGCH Power Offset for
TTI 10ms
USrvDivPc ergchPOTti2
E-RGCH Power
Offset
TS 25.433;
TS 25.423
E-RGCH Power Offset for
TTI 2ms in Single Link
Condition
USrvDivPc ergchPOTti10
E-RGCH Power
Offset
TS 25.433;
TS 25.423
E-RGCH Power Offset for
TTI 10ms in Single Link
Condition
USrvDivPc ehichPOTti2
E-HICH Power
Offset
TS 25.433;
TS 25.423
E-HICH Power Offset for TTI
2ms in Single Link Condition
USrvDivPc ehichPOTti10
E-HICH Power
Offset
TS 25.433;
TS 25.423
E-HICH Power Offset for TTI
10ms in Single Link
Condition
USrvDivPc pwrForSglCell
Max FACH
Power
TS 25.433
SCCPCH Power for Single
Cell Reception
USrvDivPc pwrForHalfIsd
Max FACH
Power
TS 25.433
SCCPCH Power for Cell in
Half-island Status
USrvDivPc initBlerSIR N/A N/A
Initial Value for BLER Based
SIR Target
USrvDivPc initSirAdd N/A N/A
Initial Value for Additional
SIR Target
UIubLink refModule N/A N/A Used Module
UIubLink procInstancNo N/A N/A
Process Id of NodeB
Attached CCMP
UIubLink nodeBType N/A N/A NodeB Type
UIubLink hsSharMethod N/A N/A
Co-NodeB HS-PDSCH Code
Sharing Method
UIubLink
hsdschSuptCgtDetI
nd
N/A N/A
Support R5/R6 Congestion
Detection Indicator (HS-
DSCH)
UIubLink edchSuptCgtDetInd N/A N/A
Support R5/R6 Congestion
Detection Indicator (E-DCH)
UIubLink timeDelay N/A N/A Transport Time Delay
UIubLink timeDelayJitter N/A N/A Transport Time Delay Jitter
UIubLink hsSharUptPrd N/A N/A
Co-NodeB HS-PDSCH Code
Sharing Update Period
UIubLink adjType
Power
Adjustment
Type
TS 25.433;
TS 25.423
Adjustment Type for DL
Power Balance
UIubLink auditTimer N/A N/A
NodeB Resource Audit
Timer
UIubLink divContrlField
Diversity
Control Field
TS 25.433 Diversity Control Field
UIubLink tWaitNBReach N/A N/A
Time Delay of Deleting Cell
When NodeB is Unreachable
UIubLink tAtmRelLinkPro N/A N/A
ATM Link Broken Protection
Time Length
UIubLink tIpRelLinkPro N/A N/A
IP Link Broken Protection
Time Length
UIubLink ceShareMode N/A N/A
Share Mode of CE Resource
for Multi-Operators
UIubLink ceShareSwitch N/A N/A
CE Share Switch for Carrier
Sharing
UIubLink sptDpiSpiChgInd N/A N/A
NodeB support DPI-SPI
change indication
UIubLink
iubLinkNodeBFuncti
on
N/A N/A Associated NodeB
UIubLink iubLinkUtranCell N/A N/A Associated UtranCell List
UIubLink Bandwidth N/A N/A BandWidth of Iub Interface
ULogicalIubLink minCEPercent N/A N/A
Minimal percent of CE can
be used by the PLMN
ULogicalIubLink refUTbTypeProfile N/A N/A
Used Transport Bearer Type
Profile Related to Basic
Priority
ULogicalIubLink
refUDedSrvTbProfil
e
N/A N/A
Used Dedicated Service
Transport Bearer Qos Profile
UUtranRegArea UUtranRegArea N/A N/A
UTRAN Registration Area
Object ID
UUtranRegArea ura
URA-ID; URA
ID; URA Identity
TS 25.423;
TS 25.331;
TS 25.401
URA Identity
UTrvMeasProfil
e
UTrvMeasProfile N/A N/A
Traffic Volume Measurement
Profile Object ID
UTrvMeasProfil
e
profileId N/A N/A Profile Id
URachEvtUeTrv URachEvtUeTrv N/A N/A
UE Traffic Volume Event
Measurement Configuration
Object ID for RACH
URachEvtUeTrv measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
URachEvtUeTrv measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
URachEvtUeTrv averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
URachEvtUeTrv rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
URachEvtUeTrv rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
URachEvtUeTrv rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
URachEvtUeTrv measEvtNum N/A N/A
Event Number of UE Traffic
Volume Measurement
URachEvtUeTrv meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
Measurement Event Identity
URachEvtUeTrv rptThres
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for RACH
Channel
URachEvtUeTrv trigTime Time to trigger TS 25.331 Time to Trigger
URachEvtUeTrv pendingTime
Pending time
after trigger
TS 25.331 Pending Time After Trigger
URachEvtUeTrv txInterCfgPre N/A N/A
Tx Interruption After Trigger
Configuration Tag
URachEvtUeTrv txInterruption
Tx interruption
after trigger
TS 25.331 Tx Interruption After Trigger
URachPrdUeTr
v
URachPrdUeTrv N/A N/A
UE Traffic Volume Period
Measurement Configuration
Object ID for RACH
URachPrdUeTr
v
measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
URachPrdUeTr
v
measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
URachPrdUeTr
v
averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
URachPrdUeTr
v
rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
URachPrdUeTr
v
rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
URachPrdUeTr
v
rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
URachPrdUeTr
v
prdRptAmount
Amount of
reporting
TS 25.331 Amount of Reporting
URachPrdUeTr
v
prdRptInterval
Reporting
interval
TS 25.331 Reporting Interval
UFachEvUpTrv UFachEvUpTrv N/A N/A
UP Traffic Volume Event
Measurement Configuration
Object ID for FACH
UFachEvUpTrv measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UFachEvUpTrv measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
UFachEvUpTrv averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
UFachEvUpTrv rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
UFachEvUpTrv rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
UFachEvUpTrv rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
UFachEvUpTrv measEvtNum N/A N/A
Event Number of UE Traffic
Volume Measurement
UFachEvUpTrv meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
Measurement Event Identity
UFachEvUpTrv rptThres
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for FACH
Channel
UFachEvUpTrv trigTime Time to trigger TS 25.331 Time to Trigger
UFachEvUpTrv pendingTime
Pending time
after trigger
TS 25.331 Pending Time After Trigger
UDchEvUeTrv UDchEvUeTrv N/A N/A
UE Traffic Volume Event
Measurement Configuration
Object ID for DCH
UDchEvUeTrv measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UDchEvUeTrv measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
UDchEvUeTrv averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
UDchEvUeTrv rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
UDchEvUeTrv rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
UDchEvUeTrv rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
UDchEvUeTrv measEvtNum N/A N/A
Event Number of UE Traffic
Volume Measurement
UDchEvUeTrv meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
Measurement Event Identity
UDchEvUeTrv rptThres0
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(8kbps)
UDchEvUeTrv rptThres1
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(16kbps)
UDchEvUeTrv rptThres2
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(32kbps)
UDchEvUeTrv rptThres3
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(64kbps)
UDchEvUeTrv rptThres4
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(128kbps)
UDchEvUeTrv rptThres5
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(256kbps)
UDchEvUeTrv rptThres6
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(384kbps)
UDchEvUeTrv trigTime Time to trigger TS 25.331 Time to Trigger
UDchEvUeTrv pendingTime
Pending time
after trigger
TS 25.331 Pending Time After Trigger
UDchEvUpTrv UDchEvUpTrv N/A N/A
UP Traffic Volume Event
Measurement Configuration
Object ID for DCH
UDchEvUpTrv measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UDchEvUpTrv measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
UDchEvUpTrv averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
UDchEvUpTrv rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
UDchEvUpTrv rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
UDchEvUpTrv rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
UDchEvUpTrv measEvtNum N/A N/A
Event Number of UE Traffic
Volume Measurement
UDchEvUpTrv meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
Measurement Event Identity
UDchEvUpTrv rptThres0
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(8kbps)
UDchEvUpTrv rptThres1
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(16kbps)
UDchEvUpTrv rptThres2
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(32kbps)
UDchEvUpTrv rptThres3
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(64kbps)
UDchEvUpTrv rptThres4
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(128kbps)
UDchEvUpTrv rptThres5
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(256kbps)
UDchEvUpTrv rptThres6
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for DCH
(384kbps)
UDchEvUpTrv trigTime Time to trigger TS 25.331 Time to Trigger
UDchEvUpTrv pendingTime
Pending time
after trigger
TS 25.331 Pending Time After Trigger
UDchPrdUeTrv UDchPrdUeTrv N/A N/A
UE Traffic Volume Period
Measurement Configuration
Object ID for DCH
UDchPrdUeTrv measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UDchPrdUeTrv measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
UDchPrdUeTrv averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
UDchPrdUeTrv rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
UDchPrdUeTrv rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
UDchPrdUeTrv rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
UDchPrdUeTrv prdRptAmount
Amount of
reporting
TS 25.331 Amount of Reporting
UDchPrdUeTrv prdRptInterval
Reporting
interval
TS 25.331 Reporting Interval
UDedSHsdschE
vUpTrv
UDedSHsdschEvU
pTrv
N/A N/A
UP Traffic Volume
Measurement Configuration
Number for Streaming Class
on HS-DSCH Object ID
UDedSHsdschE
vUpTrv
measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UDedSHsdschE
vUpTrv
measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
UDedSHsdschE
vUpTrv
averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
UDedSHsdschE
vUpTrv
rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
UDedSHsdschE
vUpTrv
rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
UDedSHsdschE
vUpTrv
rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
UDedSHsdschE
vUpTrv
measEvtNum N/A N/A
Event Number of UE Traffic
Volume Measurement
UDedSHsdschE
vUpTrv
meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
Measurement Event Identity
UDedSHsdschE
vUpTrv
rptThres
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for Streaming
Class on HS-DSCH Channel
UDedSHsdschE
vUpTrv
trigTime Time to trigger TS 25.331 Time to Trigger
UDedSHsdschE
vUpTrv
pendingTime
Pending time
after trigger
TS 25.331 Pending Time After Trigger
UDedIBHsdsch
EvUpTrv
UDedIBHsdschEvU
pTrv
N/A N/A
UP Traffic Volume
Measurement Configuration
for Interactive and
Background Class on HS-
DSCH Object ID
UDedIBHsdsch
EvUpTrv
measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UDedIBHsdsch
EvUpTrv
measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
UDedIBHsdsch
EvUpTrv
averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
UDedIBHsdsch
EvUpTrv
rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
UDedIBHsdsch
EvUpTrv
rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
UDedIBHsdsch
EvUpTrv
rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
UDedIBHsdsch
EvUpTrv
measEvtNum N/A N/A
Event Number of UE Traffic
Volume Measurement
UDedIBHsdsch
EvUpTrv
meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
Measurement Event Identity
UDedIBHsdsch
EvUpTrv
rptThres
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for Interactive
and Background Class on
HS-DSCH Channel
UDedIBHsdsch
EvUpTrv
trigTime Time to trigger TS 25.331 Time to Trigger
UDedIBHsdsch
EvUpTrv
pendingTime
Pending time
after trigger
TS 25.331 Pending Time After Trigger
UComHsdschE
vUpTrv
UComHsdschEvUp
Trv
N/A N/A
UP Traffic Volume
Measurement Configuration
for HS-DSCH in
CELL_FACH Object ID
UComHsdschE
vUpTrv
measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UComHsdschE
vUpTrv
measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
UComHsdschE
vUpTrv
averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
UComHsdschE
vUpTrv
rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
UComHsdschE
vUpTrv
rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
UComHsdschE
vUpTrv
rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
UComHsdschE
vUpTrv
measEvtNum N/A N/A
Event Number of UE Traffic
Volume Measurement
UComHsdschE
vUpTrv
meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
Measurement Event Identity
UComHsdschE
vUpTrv
rptThres
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for HS-DSCH
Channel in CELL_FACH
UComHsdschE
vUpTrv
trigTime Time to trigger TS 25.331 Time to Trigger
UComHsdschE
vUpTrv
pendingTime
Pending time
after trigger
TS 25.331 Pending Time After Trigger
UETTIEdchEvU
pTrv
UETTIEdchEvUpTr
v
N/A N/A
UP Throughput Event
Measurement Configuration
for E-TTI Switching Object ID
UETTIEdchEvU
pTrv
measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UETTIEdchEvU
pTrv
measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
UETTIEdchEvU
pTrv
averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
UETTIEdchEvU
pTrv
rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
UETTIEdchEvU
pTrv
rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
UETTIEdchEvU
pTrv
rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
UETTIEdchEvU
pTrv
measEvtNum N/A N/A
Event Number of UE Traffic
Volume Measurement
UETTIEdchEvU
pTrv
meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
Measurement Event Identity
UETTIEdchEvU
pTrv
thoughThres N/A N/A
Throughput Measurement
Threshold for E-TTI
Switching of Event 4A/4B for
E-DCH Channel
UETTIEdchEvU
pTrv
trigTime Time to trigger TS 25.331 Time to Trigger
UETTIEdchEvU
pTrv
pendingTime
Pending time
after trigger
TS 25.331 Pending Time After Trigger
UDedEdchEvUp
Trv
UDedEdchEvUpTrv N/A N/A
UP Traffic Volume
Measurement Configuration
Object ID for E-DCH
UDedEdchEvUp
Trv
measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UDedEdchEvUp
Trv
measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
UDedEdchEvUp
Trv
averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
UDedEdchEvUp
Trv
rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
UDedEdchEvUp
Trv
rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
UDedEdchEvUp
Trv
rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
UDedEdchEvUp
Trv
measEvtNum N/A N/A
Event Number of UE Traffic
Volume Measurement
UDedEdchEvUp
Trv
meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
Measurement Event Identity
UDedEdchEvUp
Trv
rptThres
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for E-DCH
Channel
UDedEdchEvUp
Trv
trigTime Time to trigger TS 25.331 Time to Trigger
UDedEdchEvUp
Trv
pendingTime
Pending time
after trigger
TS 25.331 Pending Time After Trigger
UComEdchEvU
pTrv
UComEdchEvUpTr
v
N/A N/A
UP Traffic Volume
Measurement Configuration
for E-DCH in CELL_FACH
Object ID
UComEdchEvU
pTrv
measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UComEdchEvU
pTrv
measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
UComEdchEvU
pTrv
averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
UComEdchEvU
pTrv
rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
UComEdchEvU
pTrv
rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
UComEdchEvU
pTrv
rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
UComEdchEvU
pTrv
measEvtNum N/A N/A
Event Number of UE Traffic
Volume Measurement
UComEdchEvU
pTrv
meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
Measurement Event Identity
UComEdchEvU
pTrv
rptThres
Reporting
Threshold
TS 25.331
Traffic Volume Threshold of
Event 4A/4B for E-DCH
Channel in CELL_FACH
UComEdchEvU
pTrv
trigTime Time to trigger TS 25.331 Time to Trigger
UComEdchEvU
pTrv
pendingTime
Pending time
after trigger
TS 25.331 Pending Time After Trigger
UEdchtoDchUp
Trv
UEdchtoDchUpTrv N/A N/A
E-DCH Throughput
Measurement Configuration
Object ID for HS-DSCH/E-
DCH to HS-DSCH/DCH
Switching
UEdchtoDchUp
Trv
averageTime
Time Interval to
take an average
or a variance
TS 25.331
Time Interval for Taking an
Average or a Variance
UEdchtoDchUp
Trv
measEvtNum N/A N/A
Event Number of UE Traffic
Volume Measurement
UEdchtoDchUp
Trv
meaEvtId
Traffic volume
event identity
TS 25.331
UE Traffic Volume
Measurement Event Identity
UEdchtoDchUp
Trv
pendingTime
Pending time
after trigger
TS 25.331 Pending Time After Trigger
UEdchtoDchUp
Trv
trigTime Time to trigger TS 25.331 Time to Trigger
UEdchtoDchUp
Trv
thoughThres N/A N/A
E-DCH Throughput
Measurement Threshold of
Event 4A/4B for HS-DSCH/E-
DCH to HS-DSCH/DCH
Switching
UEdchtoDchUp
Trv
measQuantity
Measurement
quantity
TS 25.331 Measurement Quantity
UEdchtoDchUp
Trv
measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UEdchtoDchUp
Trv
rptRlcBufInd
RLC Buffer
Payload for
each RB
TS 25.331
RLC Buffer Payload for Each
RB
UEdchtoDchUp
Trv
rptRlcAveInd
Average of RLC
Buffer Payload
for each RB
TS 25.331
Average of RLC Buffer
Payload for Each RB
UEdchtoDchUp
Trv
rptRlcVarInd
Variance of
RLC Buffer
Payload for
each RB
TS 25.331
Variance of RLC Buffer
Payload for Each RB
UIntraMeasProfi
le
UIntraMeasProfile N/A N/A
Intra-frequency
Measurement Profile Object
ID
UIntraMeasProfi
le
profileId N/A N/A Profile Id
UIntraMeasProfi
le
intialHoCelSelScen
e
N/A N/A
Initial Handover CelSel
Scene
UIntraMeasSrv
Spec
UIntraMeasSrvSpec N/A N/A
Intra-frequency
Measurement Configuration
Related to Traffic Category
Object ID
UIntraMeasSrv
Spec
srvCategory N/A N/A
Service and Bearer Type
Used for Differentiating
Handover Configuration
UIntraEcNoEvM
eas
UIntraEcNoEvMeas N/A N/A
UEIntra-frequency Event
Measurement Configuration
for CPICH Ec/No Object ID
UIntraEcNoEvM
eas
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UIntraEcNoEvM
eas
measEvtNum N/A N/A
Event Number of Intra-
frequency Measurement
UIntraEcNoEvM
eas
meaEvtId
Intra-frequency
event identity
TS 25.331
Intra-frequency Event
Identity
UIntraEcNoEvM
eas
rptRange
Reporting
Range Constant
TS 25.331
Reporting Range Constant
for Event 1A/1B
UIntraEcNoEvM
eas
w W TS 25.331 Weight for Event 1A/1B
UIntraEcNoEvM
eas
hysteresis Hysteresis TS 25.331 Hysteresis
UIntraEcNoEvM
eas
threshUsedFreq
Threshold used
frequency
TS 25.331
Threshold of the Quality of
the Used Frequency for
Event 1E/1F
UIntraEcNoEvM
eas
rptDeactThr
Reporting
deactivation
threshold
TS 25.331
Reporting Deactivation
Threshold for Event 1A
UIntraEcNoEvM
eas
rplcActThr
Replacement
activation
threshold
TS 25.331
Replacement Activation
Threshold for Event 1C and
1J
UIntraEcNoEvM
eas
trigTime Time to trigger TS 25.331 Time to Trigger
UIntraEcNoEvM
eas
evtRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting for
Event 1A/1B/1C/1J
UIntraEcNoEvM
eas
evtRptInterval
Reporting
interval
TS 25.331
Reporting Interval for Event
1A/1B/1C/1J
UIntraRscpEvM
eas
UIntraRscpEvMeas N/A N/A
UEIntra-frequency Event
Measurement Configuration
for CPICH RSCP Object ID
UIntraRscpEvM
eas
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UIntraRscpEvM
eas
measEvtNum N/A N/A
Event Number of Intra-
frequency Measurement
UIntraRscpEvM
eas
meaEvtId
Intra-frequency
event identity
TS 25.331
Intra-frequency Event
Identity
UIntraRscpEvM
eas
rptRange
Reporting
Range Constant
TS 25.331
Reporting Range Constant
for Event 1A/1B
UIntraRscpEvM
eas
w W TS 25.331 Weight for Event 1A/1B
UIntraRscpEvM
eas
hysteresis Hysteresis TS 25.331 Hysteresis
UIntraRscpEvM
eas
threshUsedFreq
Threshold used
frequency
TS 25.331
Threshold of the Quality of
the Used Frequency for
Event 1E/1F
UIntraRscpEvM
eas
rptDeactThr
Reporting
deactivation
threshold
TS 25.331
Reporting Deactivation
Threshold for Event 1A
UIntraRscpEvM
eas
rplcActThr
Replacement
activation
threshold
TS 25.331
Replacement Activation
Threshold for Event 1C and
1J
UIntraRscpEvM
eas
trigTime Time to trigger TS 25.331 Time to Trigger
UIntraRscpEvM
eas
evtRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting for
Event 1A/1B/1C/1J
UIntraRscpEvM
eas
evtRptInterval
Reporting
interval
TS 25.331
Reporting Interval for Event
1A/1B/1C/1J
UIntraMeasNoS
rvSpec
UIntraMeasNoSrvS
pec
N/A N/A
Intra-frequency
Measurement Configuration
Unrelated to Traffic Category
Object ID
UIntraEcNoPrd
Meas
UIntraEcNoPrdMea
s
N/A N/A
UEIntra-frequency Period
Measurement Configuration
for CPICH Ec/No Object ID
UIntraEcNoPrd
Meas
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UIntraEcNoPrd
Meas
prdRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting in
Period Report Criteria
UIntraEcNoPrd
Meas
prdRptInterval
Reporting
interval
TS 25.331
Reporting Interval in Period
Report Criteria
UIntraRscpPrd
Meas
UIntraRscpPrdMea
s
N/A N/A
UEIntra-frequency Period
Measurement Configuration
for CPICH RSCP Object ID
UIntraRscpPrd
Meas
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UIntraRscpPrd
Meas
prdRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting in
Period Report Criteria
UIntraRscpPrd
Meas
prdRptInterval
Reporting
interval
TS 25.331
Reporting Interval in Period
Report Criteria
UIntraEcNoEvM
easForD
UIntraEcNoEvMeas
ForD
N/A N/A
Detected SetMeasurement
Configuration for CPICH
Ec/No Object ID
UIntraEcNoEvM
easForD
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UIntraEcNoEvM
easForD
rptRange
Reporting
Range Constant
TS 25.331
Reporting Range Constant
for Event 1A/1B
UIntraEcNoEvM
easForD
w W TS 25.331 Weight for Event 1A/1B
UIntraEcNoEvM
easForD
hysteresis Hysteresis TS 25.331 Hysteresis
UIntraEcNoEvM
easForD
rptDeactThr
Reporting
deactivation
threshold
TS 25.331
Reporting Deactivation
Threshold for Event 1A
UIntraEcNoEvM
easForD
trigTime Time to trigger TS 25.331 Time to Trigger
UIntraEcNoEvM
easForD
evtRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting for
Event 1A/1B/1C/1J
UIntraEcNoEvM
easForD
evtRptInterval
Reporting
interval
TS 25.331
Reporting Interval for Event
1A/1B/1C/1J
UIntraRscpEvM
easForD
UIntraRscpEvMeas
ForD
N/A N/A
Detected Set Measurement
Configuration for CPICH
RSCP Object ID
UIntraRscpEvM
easForD
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UIntraRscpEvM
easForD
rptRange
Reporting
Range Constant
TS 25.331
Reporting Range Constant
for Event 1A/1B
UIntraRscpEvM
easForD
w W TS 25.331 Weight for Event 1A/1B
UIntraRscpEvM
easForD
hysteresis Hysteresis TS 25.331 Hysteresis
UIntraRscpEvM
easForD
rptDeactThr
Reporting
deactivation
threshold
TS 25.331
Reporting Deactivation
Threshold for Event 1A
UIntraRscpEvM
easForD
trigTime Time to trigger TS 25.331 Time to Trigger
UIntraRscpEvM
easForD
evtRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting for
Event 1A/1B/1C/1J
UIntraRscpEvM
easForD
evtRptInterval
Reporting
interval
TS 25.331
Reporting Interval for Event
1A/1B/1C/1J
UInterMeasProfi
le
UInterMeasProfile N/A N/A
UE Inter-frequency
Measurement Profile Object
ID
UInterMeasProfi
le
profileId N/A N/A Profile Id
UInterMeasProfi
le
intialHoCelSelScen
e
N/A N/A
Initial Handover CelSel
Scene
UInterMeaSrvS
pec
UInterMeaSrvSpec N/A N/A
Inter-frequency
Measurement Configuration
Related to Traffic Category
Object ID
UInterMeaSrvS
pec
srvCategory N/A N/A
Service and Bearer Type
Used for Differentiating
Handover Configuration
UInterEcNoEvM
easforU
UInterEcNoEvMeas
forU
N/A N/A
UE Inter-frequency Event
Measurement Configuration
Object ID for CPICH Ec/No
(UTRAN)
UInterEcNoEvM
easforU
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UInterEcNoEvM
easforU
measEvtNum N/A N/A
Event Number of Inter-
frequency Measurement
UInterEcNoEvM
easforU
meaEvtId
Inter-frequency
event identity
TS 25.331
Inter-frequency Event
Identity
UInterEcNoEvM
easforU
threshUsedFreq
Threshold used
frequency
TS 25.331
Absolute Threshold of the
Quality of the Currently Used
Frequency for 2B/2D/2F
UInterEcNoEvM
easforU
wUsed
W used
frequency
TS 25.331
Weight of the Currently Used
Frequency for 2A/2B/2D/2F
UInterEcNoEvM
easforU
hysteresis Hysteresis TS 25.331 Hysteresis
UInterEcNoEvM
easforU
trigTime Time to trigger TS 25.331 Time to Trigger
UInterEcNoEvM
easforU
threshNoUsedFreq
Threshold non
used frequency
TS 25.331
Absolute Threshold of the
Quality of the Non-used
Frequency for 2B/2C/2E
UInterEcNoEvM
easforU
wNoUsed
W non-used
frequency
TS 25.331
Weight of the Non-used
Frequency for 2A/2B/2C/2E
UInterRscpEvM
easforU
UInterRscpEvMeasf
orU
N/A N/A
UE Inter-frequency Event
Measurement Configuration
Object ID for CPICH RSCP
(UTRAN)
UInterRscpEvM
easforU
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UInterRscpEvM
easforU
measEvtNum N/A N/A
Event Number of Inter-
frequency Measurement
UInterRscpEvM
easforU
meaEvtId
Inter-frequency
event identity
TS 25.331
Inter-frequency Event
Identity
UInterRscpEvM
easforU
threshUsedFreq
Threshold used
frequency
TS 25.331
Absolute Threshold of the
Quality of the Currently Used
Frequency for 2B/2D/2F
UInterRscpEvM
easforU
wUsed
W used
frequency
TS 25.331
Weight of the Currently Used
Frequency for 2A/2B/2D/2F
UInterRscpEvM
easforU
hysteresis Hysteresis TS 25.331 Hysteresis
UInterRscpEvM
easforU
trigTime Time to trigger TS 25.331 Time to Trigger
UInterRscpEvM
easforU
threshNoUsedFreq
Threshold non
used frequency
TS 25.331
Absolute Threshold of the
Quality of the Non-used
Frequency for 2B/2C/2E
UInterRscpEvM
easforU
wNoUsed
W non-used
frequency
TS 25.331
Weight of the Non-used
Frequency for 2A/2B/2C/2E
UInterEcNoEvM
easforG
UInterEcNoEvMeas
forG
N/A N/A
UE Inter-frequency Event
Measurement Configuration
Object ID for CPICH Ec/No
(GSM)
UInterEcNoEvM
easforG
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UInterEcNoEvM
easforG
measEvtNum N/A N/A
Event Number of Inter-
frequency Measurement
UInterEcNoEvM
easforG
meaEvtId
Inter-frequency
event identity
TS 25.331
Inter-frequency Event
Identity
UInterEcNoEvM
easforG
threshUsedFreq
Threshold used
frequency
TS 25.331
Absolute Threshold of the
Quality of the Currently Used
Frequency for 2B/2D/2F
UInterEcNoEvM
easforG
wUsed
W used
frequency
TS 25.331
Weight of the Currently Used
Frequency for 2A/2B/2D/2F
UInterEcNoEvM
easforG
hysteresis Hysteresis TS 25.331 Hysteresis
UInterEcNoEvM
easforG
trigTime Time to trigger TS 25.331 Time to Trigger
UInterRscpEvM
easforG
UInterRscpEvMeasf
orG
N/A N/A
UE Inter-frequency Event
Measurement Configuration
Object ID for CPICH RSCP
(GSM)
UInterRscpEvM
easforG
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UInterRscpEvM
easforG
measEvtNum N/A N/A
Event Number of Inter-
frequency Measurement
UInterRscpEvM
easforG
meaEvtId
Inter-frequency
event identity
TS 25.331
Inter-frequency Event
Identity
UInterRscpEvM
easforG
threshUsedFreq
Threshold used
frequency
TS 25.331
Absolute Threshold of the
Quality of the Currently Used
Frequency for 2B/2D/2F
UInterRscpEvM
easforG
wUsed
W used
frequency
TS 25.331
Weight of the Currently Used
Frequency for 2A/2B/2D/2F
UInterRscpEvM
easforG
hysteresis Hysteresis TS 25.331 Hysteresis
UInterRscpEvM
easforG
trigTime Time to trigger TS 25.331 Time to Trigger
UInterEcNoEvM
easforE
UInterEcNoEvMeas
forE
N/A N/A
UE Inter-frequency Event
Measurement Configuration
Object ID for CPICH Ec/No
(EUTRAN)
UInterEcNoEvM
easforE
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UInterEcNoEvM
easforE
measEvtNum N/A N/A
Event Number of Inter-
frequency Measurement
UInterEcNoEvM
easforE
meaEvtId
Inter-frequency
event identity
TS 25.331
Inter-frequency Event
Identity
UInterEcNoEvM
easforE
threshUsedFreq
Threshold used
frequency
TS 25.331
Absolute Threshold of the
Quality of the Currently Used
Frequency for 2B/2D/2F
UInterEcNoEvM
easforE
wUsed
W used
frequency
TS 25.331
Weight of the Currently Used
Frequency for 2A/2B/2D/2F
UInterEcNoEvM
easforE
hysteresis Hysteresis TS 25.331 Hysteresis
UInterEcNoEvM
easforE
trigTime Time to trigger TS 25.331 Time to Trigger
UInterRscpEvM
easforE
UInterRscpEvMeasf
orE
N/A N/A
UE Inter-frequency Event
Measurement Configuration
Object ID for CPICH RSCP
(EUTRAN)
UInterRscpEvM
easforE
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UInterRscpEvM
easforE
measEvtNum N/A N/A
Event Number of Inter-
frequency Measurement
UInterRscpEvM
easforE
meaEvtId
Inter-frequency
event identity
TS 25.331
Inter-frequency Event
Identity
UInterRscpEvM
easforE
threshUsedFreq
Threshold used
frequency
TS 25.331
Absolute Threshold of the
Quality of the Currently Used
Frequency for 2B/2D/2F
UInterRscpEvM
easforE
wUsed
W used
frequency
TS 25.331
Weight of the Currently Used
Frequency for 2A/2B/2D/2F
UInterRscpEvM
easforE
hysteresis Hysteresis TS 25.331 Hysteresis
UInterRscpEvM
easforE
trigTime Time to trigger TS 25.331 Time to Trigger
UInterMeasNoS
rvSpec
UInterMeasNoSrvS
pec
N/A N/A
Inter-frequency
Measurement Configuration
Unrelated to Traffic Category
Object ID
UInterEcNoPrd
Meas
UInterEcNoPrdMea
s
N/A N/A
UEInter-frequency Period
Measurement Configuration
Object ID for CPICH Ec/No
UInterEcNoPrd
Meas
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UInterEcNoPrd
Meas
prdRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting in
Period Report Criteria
UInterEcNoPrd
Meas
prdRptInterval
Reporting
interval
TS 25.331
Reporting Interval in Period
Report Criteria
UInterRscpPrd
Meas
UInterRscpPrdMea
s
N/A N/A
UEInter-frequency Period
Measurement Configuration
Object ID for CPICH RSCP
UInterRscpPrd
Meas
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UInterRscpPrd
Meas
prdRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting in
Period Report Criteria
UInterRscpPrd
Meas
prdRptInterval
Reporting
interval
TS 25.331
Reporting Interval in Period
Report Criteria
URatMeasProfil
e
URatMeasProfile N/A N/A
Inter-RAT Measurement
Profile Object ID
URatMeasProfil
e
profileId N/A N/A Profile Id
URatMeasProfil
e
intialHoCelSelScen
e
N/A N/A
Initial Handover CelSel
Scene
URatMeasSrvS
pec
URatMeasSrvSpec N/A N/A
Inter-RAT Measurement
Configuration Related to
Traffic Category Object ID
URatMeasSrvS
pec
srvCategory N/A N/A
Service and Bearer Type
Used for Differentiating
Handover Configuration
URatEcNoEvMe
asforG
URatEcNoEvMeasf
orG
N/A N/A
UE Inter-RAT Event
Measurement Configuration
Object ID for CPICH Ec/No
(GSM)
URatEcNoEvMe
asforG
filterCoeff Filter coefficient TS 25.331 UTRAN Filter Coefficient
URatEcNoEvMe
asforG
gsmFilterCoeff Filter coefficient TS 25.331 GSM Filter Coefficient
URatEcNoEvMe
asforG
eventNum N/A N/A
Inter-RAT Measurement
Event Number
URatEcNoEvMe
asforG
eventId
Inter-RAT event
identity
TS 25.331 Inter-RAT Event Identity
URatEcNoEvMe
asforG
thresh
Threshold own
system
TS 25.331
Absolute Threshold of the
Quality of UTRAN Cell for 3A
URatEcNoEvMe
asforG
w N/A N/A
Weight of the UTRAN
System for 3A
URatEcNoEvMe
asforG
threshSys
Threshold other
system
TS 25.331
Absolute Threshold of the
Quality of Other RAT for
3A/3B/3C
URatEcNoEvMe
asforG
hysteresis Hysteresis TS 25.331 Hysteresis
URatEcNoEvMe
asforG
trigTime Time to trigger TS 25.331 Time to Trigger
URatRscpEvMe
asforG
URatRscpEvMeasf
orG
N/A N/A
UE Inter-RAT Event
Measurement Configuration
Object ID for CPICH RSCP
(GSM)
URatRscpEvMe
asforG
filterCoeff Filter coefficient TS 25.331 UTRAN Filter Coefficient
URatRscpEvMe
asforG
gsmFilterCoeff Filter coefficient TS 25.331 GSM Filter Coefficient
URatRscpEvMe
asforG
eventNum N/A N/A
Inter-RAT Measurement
Event Number
URatRscpEvMe
asforG
eventId
Inter-RAT event
identity
TS 25.331 Inter-RAT Event Identity
URatRscpEvMe
asforG
thresh
Threshold own
system
TS 25.331
Absolute Threshold of the
Quality of UTRAN Cell for 3A
URatRscpEvMe
asforG
w N/A N/A
Weight of the UTRAN
System for 3A
URatRscpEvMe
asforG
threshSys
Threshold other
system
TS 25.331
Absolute Threshold of the
Quality of Other RAT for
3A/3B/3C
URatRscpEvMe
asforG
hysteresis Hysteresis TS 25.331 Hysteresis
URatRscpEvMe
asforG
trigTime Time to trigger TS 25.331 Time to Trigger
URatEcNoEvMe
asforE
URatEcNoEvMeasf
orE
N/A N/A
UE Inter-RAT Event
Measurement Configuration
Object ID for CPICH Ec/No
(EUTRAN)
URatEcNoEvMe
asforE
filterCoeff Filter coefficient TS 25.331 UTRAN Filter Coefficient
URatEcNoEvMe
asforE
eUtranFilterCoeff Filter coefficient TS 25.331 EUtran Filter Coefficient
URatEcNoEvMe
asforE
eventNum N/A N/A
Inter-RAT Measurement
Event Number
URatEcNoEvMe
asforE
eventId
Inter-RAT event
identity
TS 25.331 Inter-RAT Event Identity
URatEcNoEvMe
asforE
thresh
Threshold own
system
TS 25.331
Absolute Threshold of the
Quality of UTRAN Cell for 3A
URatEcNoEvMe
asforE
w N/A N/A
Weight of the UTRAN
System for 3A
URatEcNoEvMe
asforE
threshSys
Threshold other
system
TS 25.331
Absolute Threshold of the
Quality of Other RAT for
3A/3B/3C
URatEcNoEvMe
asforE
hysteresis Hysteresis TS 25.331 Hysteresis
URatEcNoEvMe
asforE
trigTime Time to trigger TS 25.331 Time to Trigger
URatRscpEvMe
asforE
URatRscpEvMeasf
orE
N/A N/A
UE Inter-RAT Event
Measurement Configuration
Object ID for CPICH RSCP
(EUTRAN)
URatRscpEvMe
asforE
filterCoeff Filter coefficient TS 25.331 UTRAN Filter Coefficient
URatRscpEvMe
asforE
eUtranFilterCoeff Filter coefficient TS 25.331 EUtran Filter Coefficient
URatRscpEvMe
asforE
eventNum N/A N/A
Inter-RAT Measurement
Event Number
URatRscpEvMe
asforE
eventId
Inter-RAT event
identity
TS 25.331 Inter-RAT Event Identity
URatRscpEvMe
asforE
thresh
Threshold own
system
TS 25.331
Absolute Threshold of the
Quality of UTRAN Cell for 3A
URatRscpEvMe
asforE
w N/A N/A
Weight of the UTRAN
System for 3A
URatRscpEvMe
asforE
threshSys
Threshold other
system
TS 25.331
Absolute Threshold of the
Quality of Other RAT for
3A/3B/3C
URatRscpEvMe
asforE
hysteresis Hysteresis TS 25.331 Hysteresis
URatRscpEvMe
asforE
trigTime Time to trigger TS 25.331 Time to Trigger
URatMeasNoSr
vSpec
URatMeasNoSrvSp
ec
N/A N/A
Inter-RAT Measurement
Configuration Unrelated to
Traffic Category Object ID
URatEcNoPrdM
eas
URatEcNoPrdMeas N/A N/A
UEInter-RAT Period
Measurement Configuration
Object ID for CPICH Ec/No
URatEcNoPrdM
eas
filterCoeff Filter coefficient TS 25.331 UTRAN Filter Coefficient
URatEcNoPrdM
eas
gsmFilterCoeff Filter coefficient TS 25.331 GSM Filter Coefficient
URatEcNoPrdM
eas
eUtranFilterCoeff Filter coefficient TS 25.331 EUtran Filter Coefficient
URatEcNoPrdM
eas
prdRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting in
Period Report Criteria
URatEcNoPrdM
eas
prdRptInterval
Reporting
interval
TS 25.331
Reporting Interval in Period
Report Criteria
URatRscpPrdM
eas
URatRscpPrdMeas N/A N/A
UEInter-RAT Period
Measurement Configuration
Object ID for CPICH RSCP
URatRscpPrdM
eas
filterCoeff Filter coefficient TS 25.331 UTRAN Filter Coefficient
URatRscpPrdM
eas
gsmFilterCoeff Filter coefficient TS 25.331 GSM Filter Coefficient
URatRscpPrdM
eas
eUtranFilterCoeff Filter coefficient TS 25.331 EUtran Filter Coefficient
URatRscpPrdM
eas
prdRptAmount
Amount of
reporting
TS 25.331
Amount of Reporting in
Period Report Criteria
URatRscpPrdM
eas
prdRptInterval
Reporting
interval
TS 25.331
Reporting Interval in Period
Report Criteria
UNbComMeasP
rofile
UNbComMeasProfil
e
N/A N/A
NodeB Common
Measurement Profile Object
ID
UNbComMeasP
rofile
profileId N/A N/A Profile Id
UNbComMeasP
rofile
intialloadscene N/A N/A Initial Load Scene
UNbComMeas UNbComMeas N/A N/A
NodeB Common
Measurement Configuration
Object ID
UNbComMeas nbCMCfgNote N/A N/A
Function of Configuration
Parameters
UNbComMeas measObjType
CHOICE
Common
Measurement
Object Type
TS 25.433
Common Measurement
Object Type
UNbComMeas comMeasType
Common
Measurement
Type
TS 25.433 Common Measurement Type
UNbComMeas measFilterCoeff
Measurement
Filter Coefficient
TS 25.433
Measurement Filter
Coefficient
UNbComMeas rptType
Report
Characteristics
TS 25.433 Report Characteristics
UNbComMeas rptPrdUnit
CHOICE Report
Periodicity
Scale
TS 25.433
Choice Report Periodicity
Scale
UNbComMeas rptPrd
Report
Periodicity
Value
TS 25.433 Report Period
UNbComMeas onModChangTime
TUTRAN-GPS
Change Limit
TS 25.433 TUTRAN-GPS Change Limit
UNbComMeas onModDeviTime
Predicted
TUTRAN-GPS
Deviation Limit
TS 25.433
Predicted TUTRAN-GPS
Deviation Limit
UNbComMeas gpsMeasAccClass
TUTRAN-GPS
Accuracy Class
TS 25.433
TUTRAN-GPS Measurement
Accuracy Class
UNbDedMeasPr
ofile
UNbDedMeasProfil
e
N/A N/A
NodeB Dedicated
Measurement Profile Object
ID
UNbDedMeasPr
ofile
profileId N/A N/A Profile Id
UNbDedMeas UNbDedMeas N/A N/A
NodeB Dedicated
Measurement Configuration
Object ID
UNbDedMeas nbDMCfgNote N/A N/A
Function of configuration
Parameters
UNbDedMeas dedMeasType
Dedicated
Measurement
Type
TS 25.433
Dedicated Measurement
Type
UNbDedMeas measFilterCoeff
Measurement
Filter Coefficient
TS 25.433
Measurement Filter
Coefficient
UNbDedMeas rptType
Report
Characteristics
TS 25.433 Report Characteristics
UNbDedMeas evtEfSirEThrd1
Measurement
Threshold 1
TS 25.433
Measurement Threshold 1 of
Event E/F for SIR Error
UNbDedMeas dlRateLevel N/A N/A
Downlink Rate Level
Threshold used for D-TCP
Measurement in DASF-PS
UNbDedMeas evtAbTcpThrd
Measurement
Threshold;
TS 25.433
Measurement Threshold of
Event A/B for Transmitted
Code Power
UNbDedMeas evtEfSirEThrd2
Measurement
Threshold 2
TS 25.433
Measurement Threshold 2 of
Event E/F for SIR Error
UNbDedMeas evtAbcdefTime
Measurement
Hysteresis
Time;
Measurement
Change Time
TS 25.433
Measurement Change
Time/Measurement
HysteresisTime
UNbDedMeas rptPrdUnit
CHOICE Report
Periodicity
Scale
TS 25.433
Choice Report Periodicity
Scale
UNbDedMeas rptPrd
Report
Periodicity
Value
TS 25.433 Report Periodicity Value
UExternalENBF
unction
UExternalENBFunct
ion
N/A N/A
External ENodeB Function
Object ID
UExternalENBF
unction
eNodeBId N/A N/A ENodeB ID
UExternalENBF
unction
eNodeBType N/A N/A ENodeB Type
UExternalENBF
unction
rncid N/A N/A RncID
UExternalEUtra
nCellFDD
UExternalEUtranCe
llFDD
N/A N/A
External EUTRAN Cell FDD
Object ID
UExternalEUtra
nCellFDD
pci N/A N/A
Physical EUTRAN Cell
Identity
UExternalEUtra
nCellFDD
plmnNum N/A N/A PLMN Number
UExternalEUtra
nCellFDD
mcc
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Country Code
UExternalEUtra
nCellFDD
mnc
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Network Code
UExternalEUtra
nCellFDD
mncLength N/A N/A MNC BCD Code Length
UExternalEUtra
nCellFDD
cellIdentity N/A N/A EUTRAN Cell Identity
UExternalEUtra
nCellFDD
eutranFreqBandInd
Frequency
Band Indicator;
Frequency band
indicator;
Frequency band
N/A
Eutran Frequency Band
Indicator
UExternalEUtra
nCellFDD
earfcnDl N/A N/A
Downlink EUTRAN Absolute
Radio Frequency Channel
Number
UExternalEUtra
nCellFDD
earfcnUl N/A N/A
Uplink EUTRAN Absolute
Radio Frequency Channel
Number
UExternalEUtra
nCellFDD
tac N/A N/A Tracking Area Code
UExternalEUtra
nCellFDD
eUtranMeasBand N/A N/A
EUTRAN Measurement
Bandwidth
UExternalEUtra
nCellFDD
lac N/A N/A Location Area Code
UExternalEUtra
nCellFDD
rac N/A N/A Routing Area Code
UExternalEUtra
nCellFDD
eutranDlLdThrd N/A N/A
Eutran Downlink Load
Threshold
UExternalEUtra
nCellFDD
eutranUlLdThrd N/A N/A
Eutran Uplink Load
Threshold
UExternalEUtra
nCellTDD
UExternalEUtranCe
llTDD
N/A N/A
External EUTRAN Cell TDD
Object ID
UExternalEUtra
nCellTDD
pci N/A N/A
Physical EUTRAN Cell
Identity
UExternalEUtra
nCellTDD
plmnNum N/A N/A PLMN Number
UExternalEUtra
nCellTDD
mcc
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Country Code
UExternalEUtra
nCellTDD
mnc
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Network Code
UExternalEUtra
nCellTDD
mncLength N/A N/A MNC BCD Code Length
UExternalEUtra
nCellTDD
cellIdentity N/A N/A EUTRAN Cell Identity
UExternalEUtra
nCellTDD
eutranFreqBandInd
Frequency
Band Indicator;
Frequency band
indicator;
Frequency band
N/A
Eutran Frequency Band
Indicator
UExternalEUtra
nCellTDD
earfcn N/A N/A
EUTRAN Absolute Radio
Frequency Channel Number
UExternalEUtra
nCellTDD
tac N/A N/A Tracking Area Code
UExternalEUtra
nCellTDD
eUtranMeasBand N/A N/A
EUTRAN Measurement
Bandwidth
UExternalEUtra
nCellTDD
lac N/A N/A Location Area Code
UExternalEUtra
nCellTDD
rac N/A N/A Routing Area Code
UExternalEUtra
nCellTDD
eutranDlLdThrd N/A N/A
Eutran Downlink Load
Threshold
UExternalEUtra
nCellTDD
eutranUlLdThrd N/A N/A
Eutran Uplink Load
Threshold
UExternalRncF
unction
UExternalRncFuncti
on
N/A N/A
External RNC Function
Object ID
UExternalRncF
unction
mcc
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Country Code
UExternalRncF
unction
mnc
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Network Code
UExternalRncF
unction
rncId N/A N/A Adjacent RNC Identity
UExternalRncF
unction
sharingMCC N/A N/A
Sharing Mobile Country
Code
UExternalRncF
unction
sharingMNC N/A N/A
Sharing Mobile Network
Code
UExternalRncF
unction
refUIurLink N/A N/A Used Iur Link
UExternalRncF
unction
divCtrlInd
Diversity
Control Field
TS 25.423
SRNC Diversity Combination
Indicator
UExternalRncF
unction
dIurCmbInd N/A N/A
DRNC Diversity Combination
Indicator
UExternalUtran
CellFDD
UExternalUtranCell
FDD
N/A N/A
External UTRAN Cell Object
ID
UExternalUtran
CellFDD
cId
C-Id; Cell
Identifier
TS 25.423;
TS 25.331;
TS 25.401
Cell Identity
UExternalUtran
CellFDD
mcc
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Country Code
UExternalUtran
CellFDD
mnc
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Network Code
UExternalUtran
CellFDD
rncId
RNC-ID; RNC
Identifier
TS 25.423;
TS 25.413;
TS 23.003
RNC Identity
UExternalUtran
CellFDD
cellMode N/A N/A Cell Mode
UExternalUtran
CellFDD
lac
LAC; Location
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Location Area Code
UExternalUtran
CellFDD
rac
RAC; Routing
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Routing Area Code
UExternalUtran
CellFDD
hcsPrio
HCS_PRIO;
HCS Prio
TS 25.331;
TS25.423;
TS 25.304
HCS_PRIO
UExternalUtran
CellFDD
maximumAllowedUl
TxPower
Maximum
Allowed UL Tx
Power
TS 25.423;
TS 25.331
RACH Maximum Allowed UL
TX Power
UExternalUtran
CellFDD
qrxlevMin Qrxlevmin
TS 25.331;
TS 25.304
Qrxlevmin in SIB11
UExternalUtran
CellFDD
deltaQrxlevmin DeltaQrxlevmin TS 25.304 DeltaQrxlevmin in SIB11
UExternalUtran
CellFDD
freqBandInd
Frequency
Band Indicator;
Frequency band
indicator;
Frequency band
TS 25.423;
TS 25.331
Frequency Band Indicator
UExternalUtran
CellFDD
uarfcnUl
UARFCN uplink
(Nu); UL
UARFCN;
UARFCN;
UTRA Absolute
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
UUARFCN
UExternalUtran
CellFDD
uarfcnDl
UARFCN
downlink (Nd);
DL UARFCN;
UARFCN;
UTRA Absolute
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
DUARFCN
UExternalUtran
CellFDD
primaryScrambling
Code
Primary
Scrambling
Code
TS 25.331;
TS 25.423;
TS 25.433
Cell Primary Scrambling
Code
UExternalUtran
CellFDD
primaryCpichPower
Primary CPICH
Power; Primary
CPICH Tx
Power
TS 25.423;
TS 25.433;
TS 25.331
Primary CPICH Power
UExternalUtran
CellFDD
qqualMin Qqualmin
TS 25.331;
TS 25.304
Qqualmin in SIB11
UExternalUtran
CellFDD
txDiversityIndicator
Tx Diversity
Indicator; TX
Diversity
Indicator;
Transmit
TS 25.423;
TS 25.331;
TS 25.433
TX Diversity Indicator
UExternalUtran
CellFDD
sttdSupportIndicator
STTD Support
Indicator; STTD
Indicator; STTD
indicator
TS 25.423;
TS 25.433;
TS 25.331
STTD Support Indicator
UExternalUtran
CellFDD
closedLoopMode1S
uptInd
Closed Loop
Mode1 Support
Indicator;
Diversity Mode;
TX Diversity
TS 25.423;
TS 25.433;
TS 25.331
Closed Loop Mode 1
Support Indicator
UExternalUtran
CellFDD
mncLength N/A N/A MNC BCD Code Length
UExternalUtran
CellFDD
sharingMCC
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Sharing Mobile Country
Code
UExternalUtran
CellFDD
sharingMNC
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Sharing Mobile Network
Code
UExternalUtran
CellFDD
sharingMNCLength N/A N/A
Sharing MNC BCD Code
Length
UExternalUtran
CellFDD
sac
SAC; Service
Area Code
TS 25.423;
TS 25.413;
TS 23.003
Service Area Code for CS
and PS Domain
UExternalUtran
CellFDD
refUUtranRegArea
URA-ID; URA
ID; URA Identity
TS 25.423;
TS 25.331;
TS 25.401
Used UTRAN Registration
Area
UExternalUtran
CellFDD
snacNum maxnoofSNAs TS 25.423
Shared Network Area Code
Number
UExternalUtran
CellFDD
snacList
SNAC; Shared
Network Area
Code
TS 25.423;
TS 25.413;
TS 23.003
Shared Network Area Code
UExternalUtran
CellFDD
hspaSptMeth N/A N/A HSPA Support Method
UExternalUtran
CellFDD
fdpchSuptInd
Cell Capability
Container FDD
TS 25.423 F-DPCH Support Indicator
UExternalUtran
CellFDD
eFdpchSupInd
Cell Capability
Container FDD
TS 25.423
Neighboring Cell Enhanced
F-DPCH Support Indicator
UExternalUtran
CellFDD
mimoSuptInd N/A N/A MIMO Support Indicator
UExternalUtran
CellFDD
mimo64QamSuptIn
d
N/A N/A
Mimo64Qam Support
Indicator
UExternalUtran
CellFDD
dl64QamSuptInd N/A N/A 64QAM DL Support Indicator
UExternalUtran
CellFDD
adjImpUL2SuptInd N/A N/A
Adjacent Cell Uplink
Enhanced Layer 2 Support
Indicator
UExternalUtran
CellFDD
flexMacdSuptInd N/A N/A
Flexible MAC-d PDU Size
Support Indicator
UExternalUtran
CellFDD
iurDcHsdsSuptInd N/A N/A
Dual-Cell HS-DSCH Support
Indication
UExternalUtran
CellFDD
sndSvrCelID N/A N/A
Possible Secondary Serving
Cell ID
UExternalUtran
CellFDD
pcpichPwrPre N/A N/A
Primary CPICH Power
Configuration Tag
UExternalUtran
CellFDD
cellDescripType
Geographical
Area
TS 25.331;
TS 25.413
Cell Description Type
UExternalUtran
CellFDD
polygonPointNum
Polygon-
>Geographical
Coordinates
TS 25.413 Polygon Point Number
UExternalUtran
CellFDD
polyLatitudeSign
Geographical
Coordinates
>Latitude Sign
TS 25.413 Polygon Point Latitude Sign
UExternalUtran
CellFDD
polyLatitude
Geographical
Coordinates >
Degrees Of
Latitude
TS 25.413
Degree of Polygon Point
Latitude
UExternalUtran
CellFDD
polyLongitude
Geographical
Coordinates >
Degrees Of
Longitude
TS 25.413
Degrees of Polygon Point
Longitude
UExternalUtran
CellFDD
latitudeSign
Geographical
Coordinates
>Latitude Sign
TS 25.413 Latitude Sign for Cell Center
UExternalUtran
CellFDD
latitude
Geographical
Coordinates >
Degrees Of
Latitude
TS 25.413
Degree of Latitude for Cell
Center
UExternalUtran
CellFDD
longitude
Geographical
Coordinates >
Degrees Of
Longitude
TS 25.413
Degrees of Longitude for
Cell Center
UExternalUtran
CellFDD
altitude Altitude TS 25.413 Cell Altitude for Cell Center
UExternalUtran
CellFDD
altitudeDir
Direction of
Altitude
TS 25.413
Direction of Altitude for Cell
Center
UExternalUtran
CellFDD
altitudeAcc
Vertical
Accuracy Code
TS 25.413 Altitude Accuracy
UExternalUtran
CellFDD
uncertAltitude N/A N/A Altitude AccuracyCode
UExternalUtran
CellFDD
confidence Confidence TS 25.413 Confidence
UExternalUtran
CellFDD
cellRadius N/A TS 25.413 Cell Radius
UExternalUtran
CellFDD
uncertCode N/A N/A Horizontal AccuracyCode
UExternalUtran
CellFDD
anteType N/A N/A Antenna Type
UExternalUtran
CellFDD
anteLatitudeSign
Geographical
Coordinates
>Latitude Sign
TS 25.413 Antenna Latitude Sign
UExternalUtran
CellFDD
anteLatitude
Geographical
Coordinates
>Latitude
TS 25.413 Degree of Antenna Latitude
UExternalUtran
CellFDD
anteLongitude
Geographical
Coordinates >
Degrees Of
Longitude
TS 25.413
Degrees of Antenna
Longitude
UExternalUtran
CellFDD
anteAltitude Altitude TS 25.413 Antenna Altitude
UExternalUtran
CellFDD
anteAltitudeDir
Direction of
Altitude
TS 25.413 Direction of Antenna Altitude
UExternalUtran
CellFDD
offsetAngle Offset angle
TS 25.413;
TS 25.453
Offset Angle
UExternalUtran
CellFDD
innerAngle Inner Angle TS 25.453 Inner Angle
UExternalUtran
CellFDD
adjCs64Switch N/A N/A
Switch of CS 64kbps
Establishment for External
UTRAN Cell
UExternalUtran
CellFDD
deltaQrxlevminPr N/A TS 25.304
DeltaQrxlevmin in SIB11
Configuration Tag
UExternalUtran
CellFDD
utranGpsSptInd N/A N/A
TUTRAN-GPS Measurement
Support Indicator
UExternalUtran
CellFDD
hsdschSuptCgtDetI
nd
N/A N/A
Support SRNC-NODEB HS-
DSCH Congestion Detection
Indicator
UExternalUtran
CellFDD
edchSuptCgtDetInd N/A N/A
Support SRNC-NODEB E-
DCH Congestion Detection
Indicator
UExternalUtran
CellFDD
edchTti2SuptInd
Cell Capability
Container FDD
TS 25.423 2ms E-TTI Support Indicator
UExternalUtran
CellFDD
edchSfCap
Cell Capability
Container FDD
TS 25.423 E-DCH SF Capability
UExternalUtran
CellFDD
edchHarqCombCap
Cell Capability
Container FDD
TS 25.423
E-DCH HARQ Combining
Capability
UExternalUtran
CellFDD
maxDtxCyc
Max UE DTX
Cycle
TS 25.423 Max UE DTX Cycle
UExternalUtran
CellFDD
cpcDtxDrxSuptInd
Continuous
Packet
Connectivity
DTX-DRX
Support
TS 25.423
CPC DTX-DRX Support
Indicator
UExternalUtran
CellFDD
cpcHslessSuptInd
Continuous
Packet
Connectivity HS-
SCCH less
Support
TS 25.423
CPC HS-SCCH less Support
Indicator
UExternalUtran
CellFDD
qqualMinSib12 Qqualmin
TS 25.331;
TS 25.304
Qqualmin in SIB12
UExternalUtran
CellFDD
qrxlevMinSib12 Qrxlevmin
TS 25.331;
TS 25.304
Qrxlevmin in SIB12
UExternalUtran
CellFDD
deltaQrxlevminSib1
2Pr
N/A TS 25.304
DeltaQrxlevmin in SIB12
Configuration Tag
UExternalUtran
CellFDD
deltaQrxlevminSib1
2
DeltaQrxlevmin
TS 25.331;
TS 25.304
DeltaQrxlevmin in SIB12
UExternalUtran
CellFDD
timeDelay N/A N/A Transport Time Delay
UExternalUtran
CellFDD
timeDelayJitter N/A N/A Transport Time Delay Jitter
UExternalUtran
CellFDD
nrtMaxDlRateDchD N/A N/A
Maximum Bit Rate on DL
DCH for NRT PS RAB in
External UTRAN Cell
UExternalUtran
CellFDD
nrtMaxUlRateDchD N/A N/A
Maximum Bit Rate on UL
DCH for NRT PS RAB in
External UTRAN Cell
UExternalUtran
CellFDD
rtMaxDlRateDchD N/A N/A
Maximum Bit Rate on DL
DCH for RT PS RAB in
External UTRAN Cell
UExternalUtran
CellFDD
rtMaxUlRateDchD N/A N/A
Maximum Bit Rate on UL
DCH for RT PS RAB in
External UTRAN Cell
UExternalUtran
CellFDD
nrtMaxRateEdchD N/A N/A
Maximum Bit Rate on E-DCH
for NRT PS RAB in External
UTRAN Cell
UExternalUtran
CellFDD
rtMaxRateEdchD N/A N/A
Maximum Bit Rate on E-DCH
for RT PS RAB in External
UTRAN Cell
UExternalUtran
CellFDD
dCelDcMimoSupInd N/A N/A
External UTRAN Cell Dual
Cell+MIMO Support Indicator
UExternalUtran
CellFDD
aResPara1 N/A N/A
Reserved Parameter 1 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara2 N/A N/A
Reserved Parameter 2 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara3 N/A N/A
Reserved Parameter 3 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara4 N/A N/A
Reserved Parameter 4 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara5 N/A N/A
Reserved Parameter 5 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara6 N/A N/A
Reserved Parameter 6 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara7 N/A N/A
Reserved Parameter 7 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara8 N/A N/A
Reserved Parameter 8 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara9 N/A N/A
Reserved Parameter 9 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara10 N/A N/A
Reserved Parameter 10 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara11 N/A N/A
Reserved Parameter 11 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara12 N/A N/A
Reserved Parameter 12 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara13 N/A N/A
Reserved Parameter 13 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara14 N/A N/A
Reserved Parameter 14 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara15 N/A N/A
Reserved Parameter 15 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara16 N/A N/A
Reserved Parameter 16 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara17 N/A N/A
Reserved Parameter 17 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara18 N/A N/A
Reserved Parameter 18 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara19 N/A N/A
Reserved Parameter 19 for
External UTRAN Cell
UExternalUtran
CellFDD
aResPara20 N/A N/A
Reserved Parameter 20 for
External UTRAN Cell
UExternalUtran
CellFDD
ul16QamSuppInd N/A N/A
Sixteen QAM UL Support
Indicator
UExternalUtran
CellFDD
ePowBoostSuppInd N/A N/A
E-DPCCH Power Boosting
Support Indicator
UExternalUtran
CellFDD
adjPreCodeResInd N/A N/A
Cell MIMO Precoding Weight
Set Restriction Support
Indicator
UExternalUtran
CellFDD
gaRptType
Geographical
Area
TS 25.413
Geographical Area Report
Type
UExternalUtran
CellFDD
adjClassZoneInd N/A N/A Classified Zone Indicator
UExternalUtran
CellFDD
iurDbHsdSuptInd N/A N/A
DB DC-HSDPA Support
Indicator on Iur
UExternalUtran
CellFDD
dbSndSvrCelNum N/A N/A
Number of DB Secondary
Serving Cell
UExternalUtran
CellFDD
dbSndSvrCelID N/A N/A
DB Secondary Serving Cell
ID
UExternalUtran
CellFDD
backupCId N/A N/A
The Redundant Backup Cell
ID of Adjacent Cell In This
RNC
UExternalUtran
CellFDD
hsdStat N/A N/A HSDPA Function Status
UExternalUtran
CellFDD
nbrCodHspdsch N/A N/A
Number of SF=16 Used in
HS-PDSCH
UExternalUtran
CellFDD
nbrCodHsscch N/A N/A
Number of SF=128 Used in
HS-SCCH
UExternalUtran
CellFDD
dpSttdPSMimoInd N/A N/A
Dpch sttd Indication of
DRNC cell when UE active
the MIMIO and use pcpich
and scpich as phase
reference
UExternalUtran
CellFDD
iurDcHsuSuptInd N/A N/A
DC-HSUPA Support
Indicator on Iur
UExternalUtran
CellFDD
iurDcHsuTrModInd N/A N/A
Separate Iur Transport
Bearer Support Indicator
UExternalUtran
CellFDD
iurDcHsuMulInd N/A N/A
E-DCH UL Flow Multiplexing
Support Indicator
UExternalGsmC
ell
UExternalGsmCell N/A N/A External GSM Cell Object ID
UExternalGsmC
ell
cellIdentity CI; Cell Identity
TS 25.423;
TS 25.413;
TS 23.003
Cell Identifier
UExternalGsmC
ell
bcchFrequency BCCH ARFCN TS 25.331 BCCH ARFCN
UExternalGsmC
ell
ncc
Network Colour
Code (NCC)
TS 25.331 Network Colour Code
UExternalGsmC
ell
bcc
Base Station
Colour Code
(BCC)
TS 25.331 Base Station Colour Code
UExternalGsmC
ell
lac
LAC; Location
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Location Area Code
UExternalGsmC
ell
mcc
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Country Code
UExternalGsmC
ell
mnc
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Mobile Network Code
UExternalGsmC
ell
rac
RAC; Routing
Area Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Routing Area Code
UExternalGsmC
ell
racc N/A N/A Routing Area Colour Code
UExternalGsmC
ell
mncLength N/A N/A MNC BCD Code Length
UExternalGsmC
ell
sharingMCC
MCC; Mobile
Country Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Sharing Mobile Country
Code
UExternalGsmC
ell
sharingMNC
MNC; Mobile
Network Code
TS 25.423;
TS 25.413;
TS 25.331;
TS 23.003
Sharing Mobile Network
Code
UExternalGsmC
ell
sharingMNCLength N/A N/A
Sharing MNC BCD Code
Length
UExternalGsmC
ell
geranCellInd N/A N/A GERAN Cell Indicator
UExternalGsmC
ell
bscId N/A N/A BSC Identifier
UExternalGsmC
ell
snacNum N/A N/A
Shared Network Area Code
Number
UExternalGsmC
ell
snacList
SNAC; Shared
Network Area
Code
TS 25.423;
TS 25.413;
TS 23.003
Shared Network Area Code
UExternalGsmC
ell
bandIndicator Band indicator TS 25.331 Band Indicator
UExternalGsmC
ell
maximumAllowedUl
TxPower
maximum
allowed UL TX
power
TS 25.331
Maximum Allowed UL TX
Power
UExternalGsmC
ell
hcsPrio
HCS_PRIO;
HCS Prio
TS 25.331;
TS25.423;
TS 25.304
HCS_PRIO
UExternalGsmC
ell
qrxlevMin Qrxlevmin
TS 25.331;
TS 25.304
Qrxlevmin in SIB11
UExternalGsmC
ell
deltaQrxlevminPr N/A TS 25.304
DeltaQrxlevmin in
SIB11Configuration Tag
UExternalGsmC
ell
deltaQrxlevmin DeltaQrxlevmin
TS 25.331;
TS 25.304
DeltaQrxlevmin in Sib11
UExternalGsmC
ell
qrxlevMinSib12 Qrxlevmin
TS 25.331;
TS 25.304
Qrxlevmin in SIB12
UExternalGsmC
ell
deltaQrxlevminSib1
2Pr
N/A TS 25.304
DeltaQrxlevmin in SIB12
Configuration Tag
UExternalGsmC
ell
deltaQrxlevminSib1
2
Qrxlevmin
TS 25.331;
TS 25.304
DeltaQrxlevmin in SIB12
UExternalGsmC
ell
cellIndivOffset
Cell Individual
Offset
TS 25.331 Cell Individual Offset
UExternalGsmC
ell
gsmDlLdThrd N/A N/A
GSM Downlink Load
Threshold
UExternalGsmC
ell
gsmUlLdThrd N/A N/A GSM Uplink Load Threshold
UExternalGsmC
ell
gsmDlRtLdThrd N/A N/A
GSM Downlink RT Load
Threshold
UExternalGsmC
ell
gsmUlRtLdThrd N/A N/A
GSM Uplink RT Load
Threshold
UExternalGsmC
ell
indoorCellInd N/A N/A Indoor Cell Indicator
UUtranCellFDD UUtranCellFDD N/A N/A UTRAN Cell Object ID
UUtranCellFDD cId C-ID TS 25.433 Cell Identity
UUtranCellFDD localCellId
Local Cell ID;
Local Cell
Identifier
TS 25.433;
TS 25.401
Local Cell Identity
UUtranCellFDD
maximumTransmis
sionPower
Maximum
Transmission
Power
TS 25.433
Cell Maximum Transmission
Power
UUtranCellFDD pichPower
PICH Power
offset; PICH
Power
TS 25.331;
TS 25.433
PICH Power
UUtranCellFDD cellMode N/A N/A Cell Mode
UUtranCellFDD refULocationArea N/A N/A Used Location Area
UUtranCellFDD refURoutingArea N/A N/A Used Routing Area
UUtranCellFDD refUServiceArea
SAC; Service
Area Code
TS 25.423;
TS 25.413;
TS 23.003
Used Service Area in CS+PS
Domain
UUtranCellFDD freqBandInd
Frequency
Band Indicator;
Frequency band
indicator;
Frequency band
TS 25.423;
TS 25.331
Frequency Band Indicator
UUtranCellFDD uarfcnUl
UARFCN uplink
(Nu); UL
UARFCN;
UARFCN;
UTRA Absolute
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
UUARFCN
UUtranCellFDD uarfcnDl
UARFCN
downlink (Nd);
DL UARFCN;
UARFCN;
UTRA Absolute
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
DUARFCN
UUtranCellFDD
primaryScrambling
Code
Primary
Scrambling
Code
TS 25.331;
TS 25.423;
TS 25.433
Cell Primary Scrambling
Code
UUtranCellFDD primaryCpichPower
Primary CPICH
Tx Power;
Primary CPICH
power; Primary
CPICH Power
TS 25.331;
TS 25.433;
TS25.423
P-CPICH Power
UUtranCellFDD primarySchPower
Primary SCH
Power
TS 25.433 Primary SCH Power
UUtranCellFDD
secondarySchPowe
r
Secondary SCH
Power
TS 25.433 Secondary SCH Power
UUtranCellFDD bchPower BCH Power TS 25.433 BCH Power
UUtranCellFDD aichPower
AICH Power
offset; AICH
Power
TS 25.331;
TS 25.433
AICH Power
UUtranCellFDD qqualMin Qqualmin
TS 25.331;
TS 25.304
Minimum Required Quality
Level in the Cell (Qqualmin)
UUtranCellFDD qrxlevMin Qrxlevmin
TS 25.331;
TS 25.304
Minimum Required Received
Level in the Cell (Qrxlevmin)
UUtranCellFDD deltaQrxlevmin DeltaQrxlevmin
TS 25.331;
TS 25.304
Increment to the Minimum
Required Received Level in
the Cell (DeltaQrxlevmin)
UUtranCellFDD
restrictionStateIndic
ator
Cell Reserved
for operator use
TS 25.331;
TS 25.304
Cell Reserved for Operator
Use
UUtranCellFDD sttdSupportIndicator
STTD Support
Indicator; STTD
Indicator; STTD
indicator
TS 25.423;
TS 25.433;
TS 25.331
STTD Support Indicator
UUtranCellFDD
closedLoopMode1S
uptInd
Closed Loop
Mode1 Support
Indicator;
Diversity Mode;
TX Diversity
TS 25.423;
TS 25.433;
TS 25.331
Closed Loop Mode 1
Support Indicator
UUtranCellFDD txDiversityIndicator
STTD indicator;
STTD Indicator
TS 25.331;
TS 25.433;
TS 25.211
Cell Downlink Common
Physical Channel Transmit
Diversity Indicator
UUtranCellFDD refUUtranRegArea N/A N/A
Used UTRAN Registration
Area
UUtranCellFDD cellIndividualOffset
Cell Individual
Offset
TS 25.331 Cell Individual Offset
UUtranCellFDD refUIubLink N/A N/A Used Iub Link
UUtranCellFDD hcsPrio
HCS_PRIO;
HCS Prio
TS 25.331;
TS25.423;
TS 25.304
HCS_PRIO
UUtranCellFDD pchPower PCH Power TS 25.433 PCH Power
UUtranCellFDD address N/A N/A Address
UUtranCellFDD qHcsEcNo Qhcs
TS 25.331;
TS 25.304
Quality Threshold Level for
Applying Prioritised
Hierarchical Cell Reselection
(QHcs) When Measurement
Quantity is CPICH Ec/No
UUtranCellFDD qHcsRSCP Qhcs
TS 25.331;
TS 25.304
Quality Threshold Level for
Applying Prioritised
Hierarchical Cell Reselection
(QHcs) When Measurement
Quantity is CPICH RSCP
UUtranCellFDD deltaQrxlevminPre N/A TS 25.304
Increment to the Minimum
Required Received Level in
the Cell Configuration Tag
UUtranCellFDD
refUNbComMeasPr
ofile
N/A N/A
Used NodeB Common
Measurement Profile
UUtranCellFDD refUTrvMeasProfile N/A N/A
Used Traffic Volume
Measurement Profile
UUtranCellFDD
refUUeIntMeasProfi
le
N/A N/A
Used UE Internal
Measurement Profile
UUtranCellFDD tCell T Cell TS 25.433 T_Cell
UUtranCellFDD cellScen N/A N/A Pathloss Scenario
UUtranCellFDD refUServiceAreaBc N/A N/A
Used Service Area in BC
Domain
UUtranCellFDD sectorId N/A N/A Sector Id
UUtranCellFDD cellDescripType
Geographical
Area
TS 25.331;
TS 25.413
Cell Description Type
UUtranCellFDD polygonPointNum Polygon TS 25.413 Polygon Point Number
UUtranCellFDD polyLatitudeSign
Geographical
Coordinates
>Latitude Sign
TS 25.413 Polygon Point Latitude Sign
UUtranCellFDD polyLatitude
Geographical
Coordinates >
Degrees Of
Latitude
TS 25.413
Degree of Polygon Point
Latitude
UUtranCellFDD polyLongitude
Geographical
Coordinates >
Degrees Of
Longitude
TS 25.413
Degrees of Polygon Point
Longitude
UUtranCellFDD latitudeSign
Geographical
Coordinates
>Latitude Sign
TS 25.413 Latitude Sign for Cell Center
UUtranCellFDD latitude
Geographical
Coordinates >
Degrees Of
Latitude
TS 25.413
Degree of Latitude for Cell
Center
UUtranCellFDD longitude
Geographical
Coordinates >
Degrees Of
Longitude
TS 25.413
Degrees of Longitude for
Cell Center
UUtranCellFDD altitude Altitude TS 25.413 Cell Altitude for Cell Center
UUtranCellFDD altitudeDir
Direction of
Altitude
TS 25.413
Direction of Altitude for Cell
Center
UUtranCellFDD altitudeAcc
Vertical
Accuracy Code
TS 25.413 Altitude Accuracy
UUtranCellFDD uncertAltitude N/A N/A Altitude Accuracy Code
UUtranCellFDD confidence Confidence TS 25.413 Confidence
UUtranCellFDD cellRadius N/A TS 25.413 Cell Radius
UUtranCellFDD uncertCode N/A N/A Horizontal Accuracy Code
UUtranCellFDD gARptType
Geographical
Area
TS 25.413
Geographical Area Report
Type
UUtranCellFDD anteType N/A N/A Antenna Type
UUtranCellFDD anteLatitudeSign
Geographical
Coordinates
>Latitude Sign
TS 25.413 Antenna Latitude Sign
UUtranCellFDD anteLatitude
Geographical
Coordinates
>Latitude
TS 25.413 Degree of Antenna Latitude
UUtranCellFDD anteLongitude
Geographical
Coordinates >
Degrees Of
Longitude
TS 25.413
Degrees of Antenna
Longitude
UUtranCellFDD anteAltitude Altitude TS 25.413 Antenna Altitude
UUtranCellFDD anteAltitudeDir
Direction of
Altitude
TS 25.413 Direction of Antenna Altitude
UUtranCellFDD offsetAngle Offset angle
TS 25.413;
TS 25.453
Offset Angle
UUtranCellFDD innerAngle Inner Angle TS 25.453 Inner Angle
UUtranCellFDD hspaSptMeth N/A N/A HSPA Support Method
UUtranCellFDD mbmsSuptInd N/A N/A MBMS Support Indicator
UUtranCellFDD suptMulUsDetInd N/A N/A
Multi-User Detection Support
Indicator
UUtranCellFDD tutranGpsSptInd N/A N/A
TUTRAN-GPS Measurement
Support Indicator
UUtranCellFDD csTrafPrefInd N/A N/A Preferred Traffic Type (CS)
UUtranCellFDD r99PsTrafPrefInd N/A N/A
Preferred Traffic Type (R99
PS)
UUtranCellFDD hsTrafPrefInd N/A N/A
Preferred Traffic Type (HS
PS)
UUtranCellFDD useOfHCS Use of HCS TS 25.331
Use of HCS in Cell
Reselection
UUtranCellFDD ulPwrHoSwch N/A N/A
UE Tx Power Switch for
Handover
UUtranCellFDD ulBlerHoSwch N/A N/A
UL BLER Switch for
Handover
UUtranCellFDD dlPwrHoSwch N/A N/A
DL Tx Power Switch for
Handover
UUtranCellFDD sIB12Ind SIB12 Indicator TS 25.331 SIB12 Indicator
UUtranCellFDD hsdStat N/A N/A HSDPA Function Status
UUtranCellFDD hsuStat N/A N/A HSUPA Function Status
UUtranCellFDD mbmsStat N/A N/A MBMS Function Status
UUtranCellFDD
ref1UIntraMeasProfi
le
N/A N/A
Used Intra-frequency
Measurement Profile
UUtranCellFDD
ref2UIntraMeasProfi
le
N/A N/A
Used Intra-frequency
Measurement Profile (VIP)
UUtranCellFDD
refUInterMeasProfil
e
N/A N/A
Used UE Inter-frequency
Measurement Profile
UUtranCellFDD refURatMeasProfile N/A N/A
Used Inter-RAT
Measurement Profile
UUtranCellFDD cellType N/A N/A Cell Type
UUtranCellFDD bgNoiScene N/A N/A
Background Noise Automatic
Adjustment Scene
UUtranCellFDD numInSyncInd
N_INSYNC_IN
D
TS 25.433
The Number of Consecutive
In-Sync Indications NodeB
Received After which RL
Restore Procedure Shall be
Triggered (N_INSYNC_IND)
UUtranCellFDD numOutSyncInd
N_OUTSYNC_I
ND
TS 25.433
The Number of Consecutive
Out-of-Sync Indications
NodeB Received After which
the Timer T_RLFAILURE
Shall be Started
UUtranCellFDD tRlFailure T_RLFAILURE TS 25.433
Timer Length for Trigger
Radio Link Failure Procedure
After NodeB Receive
N_OUTSYNC_IND
Consecutive Out-of-Sync
UUtranCellFDD classZoneInd N/A TS 25.413 Classified Zone Indicator
UUtranCellFDD detSetHoSwch N/A N/A
Detected Set Handover
Switch
UUtranCellFDD interHoTactic N/A N/A
Inter-frequency Handover
Tactic
UUtranCellFDD ratHoTactic N/A N/A Inter-RAT Handover Tactic
UUtranCellFDD maxRateMD N/A N/A
Maximum Allowable Rate on
DCH to be Increased to
When UE is in Macro
Diversity
UUtranCellFDD nrtMaxDlRateDch N/A N/A
Maximum Bit Rate on DL
DCH for NRT PS RAB in
Serving Cell
UUtranCellFDD nrtMaxUlRateDch N/A N/A
Maximum Bit Rate on UL
DCH for NRT PS RAB in
Serving Cell
UUtranCellFDD nonIntraMeasQuan
Measurement
quantity for
frequency
quality estimate
TS 25.331
UTRAN Measurement
Quantity for Inter-frequency
and Inter-RAT
Measurements
UUtranCellFDD intraMeasQuan
Measurement
quantity
TS 25.331
UTRAN Measurement
Quantity for Intra-frequency
Measurements
UUtranCellFDD pagingSendTimes N/A N/A
Sending Times of Paging
Message
UUtranCellFDD refUSrvPcProfile N/A N/A
Used Power Control Profile
Related to Service
UUtranCellFDD sIB4Ind SIB4 Indicator TS 25.331 SIB4 Indicator
UUtranCellFDD sIB6Ind SIB6 Indicator TS 25.331 SIB6 Indicator
UUtranCellFDD pccpchInfSib6Pre N/A N/A
PCCPCH Information in
SIB6 Configuration Tag
UUtranCellFDD prachSib6Pre N/A N/A
Dynamic Persistence Level
Information of SIB6 PRACH
in SIB7 Configuration Tag
UUtranCellFDD sIB7Originator N/A N/A SIB7 Originator
UUtranCellFDD ecNoQualThrd N/A N/A
Cpich Ec/N0 Threshold for
Blind Handover
UUtranCellFDD rscpQualThrd N/A N/A
Cpich RSCP Threshold for
Blind Handover
UUtranCellFDD dlTpcN
DL TPC Pattern
01 Count
TS 25.433 DL TPC Pattern 01 Count
UUtranCellFDD rubRsvdCellInd N/A N/A
Cells for Reserved RUB
Indicator
UUtranCellFDD celReturnLteSwch N/A N/A
Cell Switch of Fast Return to
EUTRAN
UUtranCellFDD maxRachTxPwr
Maximum
allowed UL TX
power
TS 25.331
Maximum Allowed UL TX
Power of RACH
UUtranCellFDD prachCfgScene N/A N/A PRACH Configuration Scene
UUtranCellFDD dbHsdSuptInd N/A N/A
DB DC-HSDPA Support
Indicator
UUtranCellFDD
refUDpiAppSrvProfi
le
N/A N/A
Used DPI Application
Service Scene Profile
UUtranCellFDD
csSsUeReestSwitc
h
N/A N/A
Switch of CS Call Re-
establishment Triggered by
Receiving the CELL
UPDATE Message from UE
when SRNC is in Stable
UUtranCellFDD
csHoUeReestSwitc
h
N/A N/A
Switch of CS Call Re-
establishment Triggered by
Receiving the CELL
UPDATE Message from UE
when SRNC is in Handover
UUtranCellFDD
csRsUeReestSwitc
h
N/A N/A
Switch of CS Call Re-
establishment Triggered by
Receiving the CELL
UPDATE Message from UE
when SRNC is in RAB Setup
UUtranCellFDD
csSsRnReestSwitc
h
N/A N/A
Switch of CS Call Re-
establishment Triggered by
RAN Network when SRNC is
in Stable Status
UUtranCellFDD
csHoRnReestSwitc
h
N/A N/A
Switch of CS Call Re-
establishment Triggered by
RAN network when SRNC is
in Handover Flow
UUtranCellFDD
csRsRnReestSwitc
h
N/A N/A
Switch of CS Call Re-
establishment Triggered by
RAN network when SRNC is
in RAB Setup Flow
UUtranCellFDD
csRcUeReestSwitc
h
N/A N/A
Switch of CS Call Re-
establishment Triggered by
Receiving the CELL
UPDATE Message from UE
when SRNC is in
UUtranCellFDD
psSsUeReestSwitc
h
N/A N/A
Switch of PS Call Re-
establishment Triggered by
Receiving the CELL
UPDATE Message from UE
when SRNC is in Stable
UUtranCellFDD
psHoUeReestSwitc
h
N/A N/A
Switch of PS Call Re-
establishment Triggered by
Receiving the CELL
UPDATE Message from UE
when SRNC is in Handover
UUtranCellFDD
psRsUeReestSwitc
h
N/A N/A
Switch of PS Call Re-
establishment Triggered by
Receiving the CELL
UPDATE Message from UE
when SRNC is in RAB Setup
UUtranCellFDD
psSsRnReestSwitc
h
N/A N/A
Switch of PS Call Re-
establishment Triggered by
RAN Network when SRNC is
in Stable Status
UUtranCellFDD
psHoRnReestSwitc
h
N/A N/A
Switch of PS Call Re-
establishment Triggered by
RAN network when SRNC is
in Handover Flow
UUtranCellFDD
psRsRnReestSwitc
h
N/A N/A
Switch of PS Call Re-
establishment Triggered by
RAN network when SRNC is
in RAB Setup Flow
UUtranCellFDD
psRcUeReestSwitc
h
N/A N/A
Switch of PS Call Re-
establishment Triggered by
Receiving the CELL
UPDATE Message from UE
when SRNC is in
UUtranCellFDD virtualLac N/A N/A Virtual Location Area Code
UUtranCellFDD scenarioType N/A N/A Scenario Type
UUtranCellFDD oCNSCodeNumber N/A N/A
Number of the Codes with
SF =128 Ordered for OCNS
UUtranCellFDD oCNSCode N/A N/A
Code Node Number with SF
=128 for OCNS
UUtranCellFDD cs64Switch N/A N/A
Switch of CS 64kbps
Establishment
UUtranCellFDD mimoPilotMode N/A N/A MIMO Pilot Mode
UUtranCellFDD fDpchSuptInd N/A N/A
Cell F-DPCH Support
Indicator
UUtranCellFDD efdpchSupInd N/A N/A
Cell Enhanced F-DPCH
Support Indicator
UUtranCellFDD supt64QamInd N/A N/A
Cell 64QAM Support
Indicator
UUtranCellFDD mimoSuptInd N/A N/A Cell MIMO Support Indicator
UUtranCellFDD cpcSuptInd N/A N/A Cell CPC Support Indicator
UUtranCellFDD tti2msSuptInd N/A N/A
Cell HSUPA 2ms TTI
Support Indicator
UUtranCellFDD vamSupInd N/A N/A Cell VAM Support Indicator
UUtranCellFDD sttdMimoBindInd N/A N/A
STTD and MIMO Activation
Binding Indicator
UUtranCellFDD celMimo64QamInd N/A N/A
Cell MIMO and DL64QAM
Combined Capability
Support Indicator
UUtranCellFDD dcHsdschSupptInd N/A N/A
Dual-Cell HS-DSCH Support
Indication
UUtranCellFDD rrcRdtSwch N/A N/A
Switch of RRC Redirection
Triggered by Radio
Resource Congestion
UUtranCellFDD priRedirectRat N/A TS 25.331 Prior Redirect RAT Indicator
UUtranCellFDD twait Wait time TS 25.331
Wait Time for RRC
Connection Reestablishment
UUtranCellFDD eFACHSpptInd N/A N/A
Downlink Enhanced
CELL_FACH Support
Indicator
UUtranCellFDD uLEFACHSupport N/A N/A
Uplink Enhanced
CELL_FACH Support
Indicator
UUtranCellFDD cellDcMimoSupInd N/A N/A
Cell Dual Cell+MIMO
Support Indicator
UUtranCellFDD radioCapacity N/A N/A Radio Capacity of Cell
UUtranCellFDD loadScene N/A N/A Cell Load Scene
UUtranCellFDD loadBalanceScene N/A N/A Load Balance Scene
UUtranCellFDD sccpchCfgScene N/A N/A
SCCPCH Configuration
Scene
UUtranCellFDD hoCelSelScene N/A N/A Mobility Configuration Scene
UUtranCellFDD cellRadiusScene N/A N/A Cell Radius Scene
UUtranCellFDD celAvaSubCha N/A N/A
Cell Available Subchannel
Number Continuity Setting
Indicator
UUtranCellFDD defSibSuptSwch
Deferred
measurement
control UTRAN
support
TS 25.331
Switch of Deferred
SIB11/11bis/12 Support
UUtranCellFDD freClosePri N/A N/A
Priority of Frequency Switch
Off
UUtranCellFDD refUBPriAcProfile N/A N/A
Used Access Control Profile
Related to Basic Priority
UUtranCellFDD
refUSchPriMapping
Profile
N/A N/A
Used Scheduling Priority
Mapping Relationship Profile
UUtranCellFDD
ref1UAppPriMappin
gProfile
N/A N/A
Used Application Priority
Mapping Relationship Profile
(Load Control)
UUtranCellFDD
ref2UAppPriMappin
gProfile
N/A N/A
Used Application Priority
Mapping Relationship Profile
(Congestion Control)
UUtranCellFDD csNumThrd2 N/A N/A
Non-VIP CS User Number
Threshold When VIP Exists
UUtranCellFDD psNumThrd2 N/A N/A
Non-VIP PS User Number
Threshold When VIP Exists
UUtranCellFDD dcHsupaSupptInd N/A N/A
Dual Cell HSUPA Support
Indication
UUtranCellFDD eutranNCblstSwch N/A N/A
Switch of support the Eutran
Neighbouring cell blacklist
UUtranCellFDD refUMPOProfile N/A N/A
Used HS-PDSCH
Measurement Power Offset
profile
UUtranCellFDD hsdschTrafLimit N/A N/A
Maximum Number of Users
on HS-DSCH
UUtranCellFDD edchTrafLimit N/A N/A
Maximum Number of Users
on E-DCH
UCelInfoFDD UCelInfoFDD N/A N/A
Cell Extended Info
Configuration Object ID
UCelInfoFDD startTimetoClsF N/A N/A
Start Time to Switch Off
Frequency Intelligently
UCelInfoFDD endTimetoClsF N/A N/A
End Time to Switch Off
Frequency Intelligently
UCelInfoFDD ueNumThreshCls N/A N/A
UE Number Threshold Used
for Switching Off Frequency
Intelligently
UCelInfoFDD freClsOpnTrigTm N/A N/A
Trigger Time of Judgment
Switching ON/Off Frequency
Intelligently
UCelInfoFDD openFreAlg N/A N/A
Switch of Algorithm Used to
Switch On the Frequency
Intelligently
UCelInfoFDD closeFreAlg N/A N/A
Switch of Algorithm Used to
Switch Off the Frequency
Intelligently
UCelInfoFDD forbTimAftOpnF N/A N/A
Forbidden Time of Switching
Off After Switching On the
Frequency
UCelInfoFDD rtMaxDlRateDch N/A N/A
Maximum Bit Rate on DL
DCH for RT PS RAB in
Serving Cell
UCelInfoFDD rtMaxUlRateDch N/A N/A
Maximum Bit Rate on UL
DCH for RT PS RAB in
Serving Cell
UCelInfoFDD nrtMaxRateEdch N/A N/A
Maximum Bit Rate on E-DCH
for NRT PS RAB in Serving
Cell
UCelInfoFDD rtMaxRateEdch N/A N/A
Maximum Bit Rate on E-DCH
for RT PS RAB in Serving
Cell
UCelInfoFDD dlCtrlMBRSwitch N/A N/A DL Controlled MBR Switch
UCelInfoFDD dlControledMBR N/A N/A DL Controlled MBR
UCelInfoFDD ulCtrlMBRSwitch N/A N/A UL Controlled MBR Switch
UCelInfoFDD ulControledMBR N/A N/A UL Controlled MBR
UCelInfoFDD cellBarAcSwh N/A N/A Switch of Cell Restriction
UCelInfoFDD cellBarPollingSwh N/A N/A
Switch of Polling in Cell
Restriction
UCelInfoFDD cellBarAcNum N/A N/A Number of Cell Barred AC
UCelInfoFDD barInterval N/A N/A Time Interval of Barred AC
UCelInfoFDD servHoSwch N/A N/A Service Handover Switch
UCelInfoFDD absPriReselSwch N/A N/A
Absolute Priority Reselection
Criteria Switch
UCelInfoFDD ifOrRatHoSwch N/A N/A
Inter Frequency or Inter RAT
handover Switch
UCelInfoFDD eFACHBandWidth N/A N/A
Transport Band Width for
Downlink Enhanced
CELL_FACH
UCelInfoFDD drxOnFachInd N/A N/A
E-FACH DRX Support
Indication in Cell
UCelInfoFDD choStraMulRatHo N/A N/A
Choice Strategy in Multi-RAT
Handover
UCelInfoFDD addNRLSHOSwch N/A N/A
Adding New Radio Link
Judgement Switch
UCelInfoFDD cResPara1 N/A N/A Cell Reserved Parameter 1
UCelInfoFDD cResPara2 N/A N/A Cell Reserved Parameter 2
UCelInfoFDD cResPara3 N/A N/A Cell Reserved Parameter 3
UCelInfoFDD cResPara4 N/A N/A Cell Reserved Parameter 4
UCelInfoFDD cResPara5 N/A N/A Cell Reserved Parameter 5
UCelInfoFDD cResPara6 N/A N/A Cell Reserved Parameter 6
UCelInfoFDD cResPara7 N/A N/A Cell Reserved Parameter 7
UCelInfoFDD cResPara8 N/A N/A Cell Reserved Parameter 8
UCelInfoFDD cResPara9 N/A N/A Cell Reserved Parameter 9
UCelInfoFDD cResPara10 N/A N/A Cell Reserved Parameter 10
UCelInfoFDD cResPara11 N/A N/A Cell Reserved Parameter 11
UCelInfoFDD cResPara12 N/A N/A Cell Reserved Parameter 12
UCelInfoFDD cResPara13 N/A N/A Cell Reserved Parameter 13
UCelInfoFDD cResPara14 N/A N/A Cell Reserved Parameter 14
UCelInfoFDD cResPara15 N/A N/A Cell Reserved Parameter 15
UCelInfoFDD cResPara16 N/A N/A Cell Reserved Parameter 16
UCelInfoFDD cResPara17 N/A N/A Cell Reserved Parameter 17
UCelInfoFDD cResPara18 N/A N/A Cell Reserved Parameter 18
UCelInfoFDD cResPara19 N/A N/A Cell Reserved Parameter 19
UCelInfoFDD cResPara20 N/A N/A Cell Reserved Parameter 20
UCelInfoFDD coverPrd N/A N/A
Shield Period for Increasing
SIR Target in Threshold
Algorithm
UCelInfoFDD pOSetup N/A N/A
Power Offset for Downlink
DPCH Initial Power
Calculation when Call Setup
UCelInfoFDD pOSoftHO N/A N/A
Power Offset for Downlink
DPCH Initial Power
Calculation when Soft or
Softer Handover
UCelInfoFDD pORabHardHO N/A N/A
Power Offset for Downlink
DPCH Initial Power
Calculation when RAB Hard
Handover
UCelInfoFDD pOSrbHardHO N/A N/A
Power Offset for Downlink
DPCH Initial Power
Calculation when SRB Hard
Handover
UCelInfoFDD pOReEstablish N/A N/A
Power Offset for Downlink
DPCH Initial Power
Calculation when RAB Re-
Establishment.
UCelInfoFDD ulCacSwitch N/A N/A
Cell Uplink Admission
Control Switch
UCelInfoFDD dlCacSwitch N/A N/A
Cell Downlink Admission
Control Switch
UCelInfoFDD dlThrputSwitch N/A N/A
Cell HSDPA Throughput
Admission Control Switch
UCelInfoFDD pathLoss N/A N/A Nominal Pathloss
UCelInfoFDD rrcSigUsrNumThr N/A N/A
Threshold of the Users
Number of the RRC
Signaling only in CELL_DCH
state Co-Existin the Cell
UCelInfoFDD bckNoiseAdjSwh N/A N/A
Background Noise Automatic
Adjustment Switch
UCelInfoFDD oriBckNoise
Reference
Received Total
Wide Band
Power
TS 25.433
Original Background Noise
Configuration
UCelInfoFDD dLEFACHUserNum N/A N/A
Maximum Number of Users
on Downlink Enhanced
CELL_FACH
UCelInfoFDD sfFLayerReference N/A N/A
Reference SF Layer Used
for Code Reservation in CAC
UCelInfoFDD dpcchPcpLen
PC preamble;
PC Preamble
TS 25.331;
TS25.423
DPCH PC Preamble Length
UCelInfoFDD srbDelay
SRB delay;
SRB Delay
TS 25.331;
TS25.423
SRB Delay
UCelInfoFDD ul16QamSwi N/A N/A
Cell Uplink 16QAM Support
Indicator
UCelInfoFDD amrDlLdThrd N/A N/A
Cell Downlink Load
Threshold for AMR Data
Rate Decision
UCelInfoFDD amrUlLdThrd N/A N/A
Cell Uplink Load Threshold
for AMR Data Rate Decision
UCelInfoFDD simCompUserNum N/A N/A
User Number with
Compressed Mode
Activation for Balance
Strategy Based On
Measurement
UCelInfoFDD pcpiPwrDnStep N/A N/A
P-CPICH Power Down Step
Size Used to Switch Off
Frequency Intelligently
UCelInfoFDD pcpiPwrDnTmWin N/A N/A
Time Interval between two
Downgrade of P-CPICH
Power Used to Switch Off
Frequency Intelligently
UCelInfoFDD pcpiPwrDnStepTm N/A N/A
Times of Downgrade of P-
CPICH Power with Equal
Step Used to Switch Off
Frequency Intelligently
UCelInfoFDD cpichEcN0 N/A N/A Default CPICH Ec/No
UCelInfoFDD cchFactor N/A N/A
Common Transfer
Bandwidth Discount Factor
for Channel
UCelInfoFDD intraRptQSib3
Intra-frequency
reporting
quantity SIB3
TS 25.331
Intra-frequency reporting
quantity SIB3 when
SIB11/11bis/12 deferred
reading
UCelInfoFDD fddInterFMeasInd N/A TS 25.331
UE Inter-frequency FDD
Measurement Indicator
UCelInfoFDD interRatMIndPre N/A TS 25.331
UE Inter-System
Measurement Indicator
UCelInfoFDD powerMarginClose N/A N/A
DL Power Margin for
Frequency Switch Off
Judgement
UCelInfoFDD intMarginClose N/A N/A
UL Interference Margin for
Frequency Switch Off
Judgement
UCelInfoFDD codeMarginClose N/A N/A
DL Code Margin for
Frequency Switch Off
Judgement
UCelInfoFDD ulCeMarginClose N/A N/A
UL CE Margin for Frequency
Switch Off Judgement
UCelInfoFDD dlCeMarginClose N/A N/A
DL CE Margin for Frequency
Switch Off Judgement
UCelInfoFDD hsNumMarginClose N/A N/A
HSDPA User Number
Margin for Frequency Switch
Off Judgement
UCelInfoFDD eNumMarginClose N/A N/A
HSUPA User Number
Margin for Frequency Switch
Off Judgement
UCelInfoFDD powerMarginOpen N/A N/A
DL Power Margin for
Frequency Switch On
Judgement
UCelInfoFDD intMarginOpen N/A N/A
UL Interference Margin for
Frequency Switch On
Judgement
UCelInfoFDD codeMarginOpen N/A N/A
DL Code Margin for
Frequency Switch On
Judgement
UCelInfoFDD ulCeMarginOpen N/A N/A
UL CE Margin for Frequency
Switch On Judgement
UCelInfoFDD dlCeMarginOpen N/A N/A
DL CE Margin for Frequency
Switch On Judgement
UCelInfoFDD hsNumMarginOpen N/A N/A
HSDPA User Number
Margin for Frequency Switch
On Judgement
UCelInfoFDD eNumMarginOpen N/A N/A
HSUPA User Number
Margin for Frequency Switch
On Judgement
UCelInfoFDD freCloseAllowedInd N/A N/A
Indication of Whether the
Frequency Switch Off is
Allowed or Not
UCelInfoFDD freClsCeEvaInd N/A N/A
Indication of CE Evaluation
for Switching Off Frequency
Intelligently
UCelInfoFDD sAOffSuptInd N/A N/A
S-CPICH Deactivation
Support Indicator
UCelInfoFDD sAOffThs N/A N/A
Threshold of MIMO User
Number to Deactivate the
Secondary Antenna
UCelInfoFDD sAOnThs N/A N/A
Threshold of MIMO User
Number to Activate the
Secondary Antenna
UCelInfoFDD sATrigTime N/A N/A
Trigger Time to Activate or
Deactivate the S-CPICH
UCelInfoFDD nodeBSafeThr N/A N/A Safe Threshold for NodeB
UCelInfoFDD interNbrNumLimit N/A N/A
Filtering Limit of Inter-
Frequency Neighboring Cell
Number
UCelInfoFDD gsmNbrNumLimit N/A N/A
Filtering Limit of GSM
Neighboring Cell Number
UCelInfoFDD csIntraEvtSwch N/A N/A
Event 1A/1C/1D of DRNC's
Cells for CS Service Strategy
Switch
UCelInfoFDD r99PwrRatPlmnSwi N/A N/A
Switch for Setting R99 Power
Ratio for Different PLMN
UCelInfoFDD r99MaxPowerSwi N/A N/A
Switch for Limiting the
Maximum R99 Power when
HSDPA User Exist
UCelInfoFDD maxR99DlPwrOffst N/A N/A
Offset of the Threshold Stop
R99 Load Decreasing
Relative to the R99
Maximum Power when
HSDPA User Exist
UCelInfoFDD plmnCodShaSwch N/A N/A
Switch of PLMN DPCH Code
Sharing
UCelInfoFDD dpcchPoSecUlFre
DPCCH Power
offset for
secondary UL
frequency
TS 25.433
DPCCH Power Offset for
Secondary UL Frequency
UCelInfoFDD rsrvdBitRate N/A N/A
Reserved Bit Rate for I&B
Scheduling E-DCH Traffic
UCelInfoFDD btnOfUptSIBCmp N/A N/A
The Button of Upating SIB
completely
UCelInfoFDD sibSchuOptSwit N/A N/A
Switch of SIB Scheduling
Optimization
UCelInfoFDD periodTriggerTime N/A N/A
Time To Trigger for Inter-
frequency and Inter-Rat
Period Measurement
UCelInfoFDD nbrCsNumThrd N/A N/A
Non-VIP CS User Number
Threshold for VIP
Neighboring Cells
UCelInfoFDD nbrPsNumThrd N/A N/A
Non-VIP PS User Number
Threshold for VIP
Neighboring Cells
UCelInfoFDD hsdpaNumLow N/A N/A
Low HSDPA User Number
Level Threshold
UCelInfoFDD hsdpaNumHigh N/A N/A
High HSDPA User Number
Level Threshold
UCelInfoFDD badCovEcN0 N/A N/A
Bad Coverage P-CPICH
Ec/N0 Threshold
UCelInfoFDD badCovRscp N/A N/A
Bad Coverage P-CPICH
RSCP Threshold
UCelInfoFDD pchCellSwch N/A N/A Cell Level PCH Switch
UCelInfoFDD sib18Ind N/A N/A SIB18 Indicator
UCelInfoFDD badEdchCovSwch N/A N/A
Switch of the Uplink Channel
Allocation Strategy For Bad
Coverage
UCelInfoFDD badEdchCovEcNo N/A N/A
P-CPICH Ec/No Threshold
for Bad E-DCH Coverage
UCelInfoFDD badEdchCovRscp N/A N/A
P-CPICH RSCP Threshold
for Bad E-DCH Coverage
UCelInfoFDD edchToDch6ASwch N/A N/A
Switch of the HS-DSCH/E-
DCH to HS-DSCH/DCH
Channel Switching Triggered
by UE Transmitted Power
and Throughput
UCelInfoFDD blerLoadSwitch N/A N/A
The Switch for Load based
BLER Function
UCelInfoFDD defaultLoadLevel N/A N/A Default Load Level
UCelInfoFDD lowRotThreshold N/A N/A Low RoT Level Threshold
UCelInfoFDD highRotThreshold N/A N/A High RoT Level Threshold
UCelInfoFDD lowUserNumThr N/A N/A
Low User Number Level
Threshold
UCelInfoFDD highUserNumThr N/A N/A
High User Number Level
Threshold
UCelInfoFDD dlLowLoadThr N/A N/A
Downlink Low Load Level
Threshold
UCelInfoFDD dlHighLoadThr N/A N/A
Downlink High Load Level
Threshold
UCelInfoFDD tcpOptSwitch N/A N/A Switch of TCP Optimization
UCelInfoFDD
mulSrvRePsHoLteS
w
N/A N/A
Switch of PS Service Fast
Return to Eutran when CS is
released for Multi-RAB
Service
ULogicalCell ULogicalCell N/A N/A
Logic Cell Configuration
Object ID
ULogicalCell commonPlmnInd N/A N/A Common PLMN Indicator
ULogicalCell refUUtranCellFDD N/A N/A Used UTRAN Cell
ULogicalCell csACBarredOmcr N/A N/A
CS Domain Specific Access
Class N Barred Indicator
(N=0..15)
ULogicalCell PsACBarredOmcr N/A N/A
PS Domain Specific Access
Class N Barred Indicator
(N=0..15)
ULogicalCell accessPercent N/A N/A
Access Percent of the PLMN
for Non-Supporting UEs
ULogicalCell csDsarSwh N/A N/A Switch of CS Domain DSAR
ULogicalCell pSDsarSwh N/A N/A Switch of PS Domain DSAR
ULogicalCell pagingLocaBarSwh N/A N/A
Switch of Paging and
Location/Registration
Restriction
ULogicalCell csDsarPollingSwh N/A N/A
Switch of Polling in CS
Domain DSAR
ULogicalCell pSDsarPollingSwh N/A N/A
Switch of Polling in PS
Domain DSAR
ULogicalCell cSBarAcNum N/A N/A
Number of Barred AC in CS
Domain
ULogicalCell pSBarAcNum N/A N/A
Number of Barred AC in PS
Domain
ULogicalCell r99PwrPercent N/A N/A
R99 Power Ratio when
Carrier Sharing
ULogicalCell plmnCodShaRat N/A N/A
Dpch Code Ratio of PLMN
Code sharing
UUtranRelation UUtranRelation N/A N/A Neighbouring Cell Object ID
UUtranRelation
refUExternalUtranC
ellFDD
N/A N/A Used External UTRAN Cell
UUtranRelation refUUtranCellFDD N/A N/A Used UTRAN Cell
UUtranRelation shareCover N/A N/A Share Cover Indication
UUtranRelation measPrio N/A N/A
Measurement Priority of
Neighboring Cell
UUtranRelation stateMode N/A N/A
UE State Indicator Used for
UTRAN Neighboring Cell
Configuration
UUtranRelation sb11orSib11bis N/A TS 25.331
Broadcast in either SIB11 or
SIB11bis
UUtranRelation useOfHCS Use of HCS TS 25.331
Use of HCS in Cell
Reselection
UUtranRelation penaltyTimeSib11 Penalty_time
TS 25.331;
TS 25.304
Penalty Time in SIB11
UUtranRelation tempOffset1Sib11
Temporary_offs
et1
TS 25.331;
TS 25.304
Temporary Offset When
Measurement Quantity is
CPICH RSCP
(Temporary_offset1)
Broadcasted in SIB11
UUtranRelation tempOffset2Sib11
Temporary_offs
et2
TS 25.331;
TS 25.304
Temporary Offset When
Measurement Quantity is
CPICH Ec/No
(Temporary_offset2)
Broadcasted in SIB11
UUtranRelation cellIndivOffset
Cell Individual
Offset
TS 25.331 Cell Individual Offset
UUtranRelation qoffset1SNSib11 Qoffset1s, n
TS 25.331;
TS 25.304
Quality Offset 1 (Qoffset1s,
n) Between Serving Cell and
Neighbouring Cell
Broadcasted in SIB11
UUtranRelation qoffset2SNSib11 Qoffset2s, n
TS 25.331;
TS 25.304
Quality Offset 2 (Qoffset2s,
n) Between Serving Cell and
Neighbouring Cell
Broadcasted in SIB11
UUtranRelation qhcsEcN0Sib11 Qhcs
TS 25.331;
TS 25.304
Qhcs for CPICH Ec/No in
SIB11
UUtranRelation qhcsRscpSib11 Qhcs
TS 25.331;
TS 25.304
Qhcs for CPICH RSCP in
SIB11
UUtranRelation qhcsEcN0Sib12 Qhcs
TS 25.331;
TS 25.304
Qhcs for CPICH Ec/No in
SIB12
UUtranRelation qhcsRscpSib12 Qhcs
TS 25.331;
TS 25.304
Qhcs for CPICH RSCP in
SIB12
UUtranRelation qoffset1SNSib12 Qoffset1s, n
TS 25.331;
TS 25.304
Quality Offset 1 (Qoffset1s,
n) Between Serving Cell and
Neighbouring Cell
Broadcasted in SIB12
UUtranRelation qoffset2SNSib12 Qoffset2s, n
TS 25.331;
TS 25.304
Quality Offset 2 (Qoffset2s,
n) Between Serving Cell and
Neighbouring Cell
Broadcasted in SIB12
UUtranRelation penaltyTimeSib12 Penalty_time
TS 25.331;
TS 25.304
Penalty Time in SIB12
UUtranRelation tempOffset1Sib12
Temporary_offs
et1
TS 25.331;
TS 25.304
Temporary_offset
(Temporary_offset1) for
CPICH RSCP Broadcasted
in SIB12
UUtranRelation tempOffset2Sib12
Temporary_offs
et2
TS 25.331;
TS 25.304
Temporary_offset
(Temporary_offset2) for
CPICH EC/No Broadcasted
in SIB12
UGsmRelation UGsmRelation N/A N/A
GSM Neighbouring Cell
Object ID
UGsmRelation
refUExternalGsmCe
ll
N/A N/A Used External GSM Cell
UGsmRelation ncToSelfPhyRnc N/A N/A
Does Neighbouring Cell
Belong to Self Physical RNC
UGsmRelation gsmShareCover N/A N/A Share Cover Indication
UGsmRelation measPrio N/A N/A
Measurement Priority of
Neighboring GSM Cell
UGsmRelation gsmStateMode N/A N/A
UE State Indicator Used for
GSM Neighboring Cell
Configuration
UGsmRelation sib11orSib11bis N/A TS 25.331
Broadcast in either SIB11 or
SIB11bis
UGsmRelation useOfHCS Use of HCS TS 25.331
Use of HCS in Cell
Reselection
UGsmRelation qoffset1SNSib11 Qoffset1s, n
TS 25.331;
TS 25.304
Quality Offset 1 Between
Serving Cell and
Neighbouring Cell
Broadcasted in SIB11
UGsmRelation qhcsSib11 Qhcs
TS 25.331;
TS 25.304
Quality Threshold Level
(Qhcs) of Neighbouring Cell
Broadcasted in SIB11
UGsmRelation penaltyTimeSib11 Penalty_time
TS 25.331;
TS 25.304
Penalty Time in SIB11
UGsmRelation tempOffset1Sib11
Temporary_offs
et1
TS 25.331;
TS 25.304
Temporary_offset1 in SIB11
UGsmRelation qoffset1SNSib12 Qoffset1s, n
TS 25.331;
TS 25.304
Quality Offset 1 Between
Serving Cell and
Neighbouring Cell
Broadcasted in SIB12
UGsmRelation qhcsSib12 Qhcs
TS 25.331;
TS 25.304
Quality Threshold Level
(Qhcs) of Neighbouring Cell
Broadcasted in SIB12
UGsmRelation penaltyTimeSib12 Penalty_time
TS 25.331;
TS 25.304
Penalty Time in SIB12
UGsmRelation tempOffset1Sib12
Temporary_offs
et1
TS 25.331;
TS 25.304
Temporary_offset1 in SIB12
UEUtranRelatio
n
UEUtranRelation N/A N/A
EUTRAN Neighbouring Cell
Object ID
UEUtranRelatio
n
refUExternalEUtran
CellTDD
N/A N/A
Used External EUTRAN Cell
TDD
UEUtranRelatio
n
refUExternalEUtran
CellFDD
N/A N/A
Used External EUTRAN Cell
FDD
UCelSel UCelSel N/A N/A
Cell Selection and
Reselection Information
Object ID
UCelSel qualMeas
Cell selection
and reselection
quality measure
TS 25.331;
TS 25.304
Measurement Quantity for
Cell Selection and
Reselection
UCelSel sIntraSearchPre N/A TS 25.304
Sintrasearch Configuration
Tag
UCelSel sIntraSearch Sintrasearch
TS 25.331;
TS 25.304
Intra-Frequency
Measurement Trigger
Threshold for Cell
Reselection (Sintrasearch)
UCelSel sInterSearchPre N/A TS 25.304
Sintersearch Configuration
Tag
UCelSel sInterSearch Sintersearch
TS 25.331;
TS 25.304
Inter-Frequency
Measurement Trigger
Threshold for Cell
Reselection (Sintersearch)
UCelSel sSearchHCSPre N/A TS 25.304
SsearchHCS Configuration
Tag
UCelSel sSearchHCS SsearchHCS
TS 25.331;
TS 25.304
Measurement Trigger
Threshold for HCS Cell
Reselection (SsearchHCS)
UCelSel otherRATInfoPre N/A TS 25.304
Inter-System Information
Configuration Tag
UCelSel sSearchRat Ssearch, RAT
TS 25.331;
TS 25.304
Inter-System Measurement
Trigger Threshold for Cell
Reselection
UCelSel sHCSRatPre N/A TS 25.304
SHCS RAT Configuration
Tag
UCelSel sHCSRat SHCS, RAT
TS 25.331;
TS 25.304
Inter-System Measurement
Trigger Threshold for HCS
Cell Reselection
UCelSel sLimitRat
Slimit,
SearchRAT
TS 25.331;
TS 25.304
High HCS Priority Inter-
system Cell Measurement
Threshold for Cell
Reselection
UCelSel qqulmnOffstPre N/A N/A Qqualmin-offset Present
UCelSel qqualminOffset N/A TS 25.331 Qqualmin-offset
UCelSel qrxlvmnOffstPre N/A N/A Qrxlevmin-Offset Present
UCelSel qrxlevminOffset N/A TS 25.331 Qrxlevmin-offset
UCelSel qHyst1S Qhyst1s
TS 25.331;
TS 25.304
Reselection Hysteresis 1 of
Serving Cell (QHyst1s)
UCelSel qHyst1SPch Qhyst1s, PCH
TS 25.331;
TS 25.304
Reselection Hysteresis 1 of
Serving Cell for UE in
CELL_PCH or URA_PCH
State
UCelSel qHyst1SFach Qhyst1s, FACH
TS 25.331;
TS 25.304
Reselection Hysteresis 1of
Serving Cell for UE in
CELL_FACH State
UCelSel qHyst2S Qhyst2s
TS 25.331;
TS 25.304
Reselection Hysteresis 2 of
Serving Cell (QHyst2s)
UCelSel qHyst2SPch Qhyst2s, PCH
TS 25.331;
TS 25.304
Reselection Hysteresis 2 of
Serving Cell for UE in
CELL_PCH or URA_PCH
State
UCelSel qHyst2SFach Qhyst2s, FACH
TS 25.331;
TS 25.304
Reselection Hysteresis 2 of
Serving Cell for UE in
CELL_FACH State
UCelSel tReselection Treselections
TS 25.331;
TS 25.304
Cell Reselection Timer Value
(Treselections)
UCelSel tReselectionPch
Treselections,
PCH
TS 25.331;
TS 25.304
Cell Reselection Timer Value
for UE in CELL_PCH or
URA_PCH State
UCelSel tReselectionFach
Treselections,
FACH
TS 25.331;
TS 25.304
Cell Reselection Timer Value
for UE in CELL_FACH State
UCelSel spSfPre N/A TS 25.304
Speed Dependent Scaling
Factor for Treselection
Configuration Tag
UCelSel spSf
Speed
dependent
ScalingFactor
for Treselection
TS 25.331;
TS 25.304
Speed Dependent Scaling
Factor for Treselection
UCelSel interFreqSfPre N/A TS 25.304
Inter-frequency Scaling
Factor for Treselection
Configuration Tag
UCelSel interFreqSf
Inter-frequency
ScalingFactor
for Treselection
TS 25.331;
TS 25.304
Inter-frequency Scaling
Factor for Treselection
UCelSel interRatSfPre N/A TS 25.304
Inter-RAT Scaling Factor for
Treselection Configuration
Tag
UCelSel interRatSf
Inter-RAT
ScalingFactor
for Treselection
TS 25.331;
TS 25.304
Inter-RAT Scaling Factor for
Treselection
UCelSel noHcsTCrMax
Non-
HCS_TCrmax
TS 25.331;
TS 25.304
Duration for Evaluating
Allowed Amount of Cell
Reselection (s) in Case of
Non-HCS Usage (Non-
HCS_TCRmax)
UCelSel noHcsNCr Non-HCS_NCR
TS 25.331;
TS 25.304
Maximum Number of Cell
Reselections in Case of Non-
HCS Usage (Non-
HCS_NCR)
UCelSel noHcsTCrMaxHyst
Non-
HCS_TCRmax
Hyst
TS 25.331;
TS 25.304
Additional Time Period
Before the UE Can Revert to
Low-Mobility Measurements
in Case of Non-HCS Usage
(Non-HCS_TCRmaxHyst)
UCelSel hcsSrvCelInfoPre N/A TS 25.304
HCS Serving Cell
Information Configuration
Tag
UCelSel tCrMax TCRmax
TS 25.331;
TS 25.304
Duration for Evaluating
Allowed Amount of Cell
Reselection (s) (TCRmax)
UCelSel nCr NCR
TS 25.331;
TS 25.304
Maximum Number of Cell
Reselections in Case of HCS
Usage (NCR)
UCelSel tCrMaxHyst TCrmaxHyst
TS 25.331;
TS 25.304
Additional Time Period
Before the UE Can Exit High-
mobility in Case of HCS
Usage (TCrMaxHyst)
UCelSel cellBarredInd Cell Barred
TS 25.331;
TS 25.304
Cell Barred Indicator
UCelSel inFreqReselInd
Intra-frequency
cell re-selection
indicator
TS 25.331;
TS 25.304
Intra-frequency Cell
Reselection Indicator
UCelSel tBarred Tbarred
TS 25.331;
TS 25.304
Cell Barred Time (Tbarred)
UCelSel cellRsvExt
Cell
Reservation
Extension
TS 25.331;
TS 25.304
Cell Reservation Extension
UCelSel acBarred
Access Class
Barred
TS 25.331;
TS 25.304
Access Class N Barred
Indicator (N=0..15)
UCHspa UCHspa N/A N/A
Hspa Configuration In A Cell
Object ID
UCHspa numofHspdsch N/A N/A Number of HS-PDSCH
UCHspa minNumofHspdsch N/A N/A
Minimum Number of HS-
PDSCH
UCHspa maxNumofHspdsch N/A N/A
Maximum Number of HS-
PDSCH
UCHspa numofEagch N/A N/A Number of E-AGCH
UCHspa numofErgHich N/A N/A Number of E-RGCH/E-HICH
UCHspa hsShareInd N/A N/A
Co-NodeB HS-PDSCH Code
Sharing Indicator
UCHspa numofHsscch N/A N/A Number of HS-SCCH
UCHspa hspdschBitRate N/A N/A HS-PDSCH Bit Rate
UCHspa hspaPwrRatio
HS-PDSCH, HS-
SCCH, E-
AGCH, E-
RGCH and E-
HICH Total
TS 25.433 HSPA Total Downlink Power
UCHspa minHspaPwrRto N/A N/A
Minimum HSPA Total
Downlink Power
UCHspa maxHspaPwrRto N/A N/A
Maximum HSPA Total
Downlink Power
UCHspa nServToTotalPwr
Target Non-
serving E-DCH
to Total E-DCH
Power Ratio
TS 25.433;
TS 25.321
Target Non-serving E-DCH
to Total E-DCH Power Ratio
UCHspa maxRTWP
Maximum
Target
Received Total
Wide Band
Power
TS 25.433
Maximum Target Received
Total Wideband Power
UCHspa
refUGbrResLimitPr
ofile
N/A N/A
Used Limiting HSDPA GBR
Resource Consumption
Profile
UCHspa dpchCodeHy N/A N/A
SF512 Number to Increase
HS-PDSCH Number
UCHspa codeUptHyA N/A N/A
SF512 Number to Decrease
HS-PDSCH Number
UCHspa iurCdReAssDrop N/A N/A
Switch for DRNC Code Re-
Assignment Radio Link
Release
UCHspa
dediComEAGCHSw
i
N/A N/A
E-AGCH Multiplexing Switch
in Dedicated and Common E-
DCH
UCHspa cEdchUserNum N/A N/A
Maximum Number of Users
with Traffic on Common E-
DCH in Enhanced Uplink
CELL_FACH State
UCHspa hsNBAssInd N/A N/A
HS-PDSCH Code NodeB
Assignment Support
Indicator
UCHspa userNumPerEagch N/A N/A
Maximal Scheduled E-DCH
User Number in CELL_DCH
state Scheduled Per E-
AGCH
UCHspa eCtrChCongIncSwh N/A N/A
Switch to Increase the
HSUPA Control Channel
Number by Congestion
UCHspa maxEAgchNum N/A N/A
Maximum E-AGCH Number
for Dedicated E-DCH Users
UCHspa maxERgHichNum N/A N/A
Maximum E-RGCH/HICH
Number for Dedicated E-
DCH Users
UCHspa eAgchUpThr N/A N/A
User Number Threshold to
Increase E-AGCH Number
UCHspa eAgchDnThr N/A N/A
User Number Threshold to
Decrease E-AGCH Number
UCHspa eRgHichUpThr N/A N/A
User Number Threshold to
Increase E-RGCH/HICH
Number
UCHspa eRgHichDnThr N/A N/A
User Number Threshold to
Decrease E-RGCH/HICH
Number
UCHspa hsVsR99CdPriInd N/A N/A
HSDPA Vs R99 Code
Priority Indicator
UCMbms UCMbms N/A N/A
MBMS Configuration In A
Cell Object ID
UCMbms qoffMbms Qoffmbms TS 25.331
Additional Offset to Cells
Belonging to the MBMS
Preferred Frequency Layer
When Judging the Cell-
Ranking Criterion R of Cell
UCMbms hcsOffMbms
HCS_OFFmbm
s
TS 25.331
Offset to the Normal HCS
Priority Level Used for Cells
Belonging to the MBMS
Preferred Frequency Layer
When UE is in Low Mobility
UCMbms
mbmsSccpchResN
um
N/A N/A
MBMS S-CCPCH Reserved
Number (Step: S-CCPCH of
64kbps)
UCMbms mbmsTrafLimit N/A N/A MBMS Traffic Number Limit
UCMbms mbmsThrputThresh N/A N/A
MBMS Throughput
Threshold
UCMbms cellCntSwch N/A N/A Cell Counting Switch
UCMbms toAWS ToAWS TS 25.433
Time of Arrival Window
Startpoint
UCMbms toAWE ToAWE TS 25.433
Time of Arrival Window
Endpoint
UMbmsSa UMbmsSa N/A N/A
MBMS Service Area
Configuration Object ID
UMbmsSa mbmsSac N/A N/A MBMS Service Area Code
UMbmsPLFreq UMbmsPLFreq N/A N/A
MBMS Preferred Frequency
Layer Configuration Object
ID
UMbmsPLFreq freqBandInd N/A N/A
Frequency Band Indicator of
the Cells in the MBMS
Service Area
UMbmsPLFreq dUARFCN N/A N/A
DUARFCN of the Cells in the
MBMS Service Area
UMbmsPLFreq cellNum N/A N/A
Cell Number of a Frequency
Layer in a MBMS SAC
UMbmsPLFreq refULogicalCell N/A N/A Used Logic Cell
UMbmsNPLFre
q
UMbmsNPLFreq N/A N/A
MBMS Non Preferred
Frequency Layer Object ID
UMbmsNPLFre
q
freqBandInd N/A N/A
Frequency Band Indicator of
the Cells in the MBMS
Service Area
UMbmsNPLFre
q
dUARFCN N/A N/A
DUARFCN of the Cells in the
MBMS Service Area
UMbmsNPLFre
q
cellNum N/A N/A
Cell Number of a Frequency
Layer in a MBMS SAC
UMbmsNPLFre
q
refULogicalCell N/A N/A Used Logic Cell
UEFach UEFach N/A N/A EFACH Object ID
UEFach macehsQID
MAC-ehs queue
identity
TS 25.331;
TS 25.433
MAC-ehs Queue Identity
UEFach chTypeInd N/A N/A
Channel Type Indicator for
Downlink Enhanced
CELL_FACH Priority Queue
UEFach spi
Scheduling
Priority Indicator
TS 25.433
Scheduling Priority Indicator
for Downlink Enhanced
CELL_FACH Priority Queue
UEFach dlEFACHT1 T1 TS 25.433
Re-ordering Release timer
(T1)
UEFach dlEFACHTreset Treset TS 25.433
Reset Timer Controlling the
Reset of the MAC-ehs
Reordering Functionality
UEFach macehsWinSize
MAC ehs
window size
TS 25.331;
TS 25.433
MAC-ehs Window Size
UEFach dtcfgInd N/A N/A
Discard Timer Configuration
Indication
UEFach discardTimer Discard Timer TS 25.433 Discard Timer
UEFach maxMacPDUSize
Maximum MAC-
c PDU Size
TS 25.331;
TS 25.433
Maximum MAC-c PDU Size
for Flexible PDU
UEFach efachHSSCCHPwr
HS-SCCH
Power
TS 25.331;
TS 25.433
Enhanced CELL_FACH HS-
SCCH Power
UEFach
efachHSPDSCHPw
r
HS-PDSCH
Power
TS 25.331;
TS 25.433
Enhanced CELL_FACH HS-
PDSCH Power
UEFach ulIntfCEdchInd N/A N/A
UL Interference for Common
E-DCH Configured in
SIB5/5bis Indicator
UEFach pOPpe
Power offset Pp-
e
TS 25.331
Power Offset between the
Last Preamble and the Initial
Power of the DPCCH in
Enhanced Uplink
CELL_FACH State
UEFach addEdchTrBackOff
Additional E-
DCH
transmission
back off
TS 25.331
Additional E-DCH
Transmission Back Off for
Common E-DCH
UEFach commonEdchNum N/A N/A
Common E-DCH Resources
Number
UEFach maxEdchResCcch
Maximum E-
DCH resource
allocation for
CCCH,
maximum
TS 25.331;
TS 25.433;
TS 25.319
Maximum Common E-DCH
Resource Allocation Time for
CCCH
UEFach edchTrConBackOff
E-DCH
transmission
continuation
back off
TS 25.331;
TS 25.319
E-DCH Transmission
Continuation Back Off
UEFach maxPeriCollResol
Maximum
period for
collision
resolution
phase
TS 25.331;
TS 25.319
Maximum Period for
Collision Resolution Phase
for Common E-DCH
UEFach ulIlPcAlgEFach
Power Control
Algorithm
TS 25.331
Uplink Inner Loop Power
Control Algorithm in Uplink
Enhanced CELL_FACH
State
UEFach tpcStepSizeEFach TPC step size TS 25.331
Step Size of Uplink Inner
Loop Power Control in Uplink
Enhanced CELL_FACH
State
UEFach mPOEFach
Measurement
Power Offset
TS 25.331;
TS 25.433
HS-PDSCH Measurement
Power Offset (UL Enhanced
CELL_FACH)
UEFach maxBitRateCEdch N/A N/A
Maximum Bit Rate for
Common E-DCH User
UEFach sirtargetCEdch UL SIR Target TS 25.433
SIR Target for Common E-
DCH
UEFach fdpchPwrEFach
Initial power on
F-DPCH
TS 25.433
Initial F-DPCH Power in
Uplink Enhanced
CELL_FACH State
UEFach ulEfachMaxrate N/A N/A
Allowed UL Common MAC
Flow Transport Bandwidth
for the Cell
UEFach ackNackCqiSupInd N/A N/A
ACK/NACK/CQI Support on
HS-DPCCH Indicator in UL
Enhanced CELL_FACH
State
USccpch USccpch N/A N/A
SCCPCH Configuration
Object ID
USccpch commPhyChanelId
Common
Physical
Channel ID
TS 25.433
S-CCPCH Common Physical
Channel ID
USccpch sccpchUsage N/A
TS 25.331;
TS 25.433
SCCPCH Usage
USccpch maxFachPwr
Max FACH
Power
TS 25.433 Maximum FACH Power
USccpch sccpchOffset
Timing Offset;
FDD SCCPCH
Offset
TS 25.331;
TS 25.433
Frame Timing Offset
Between SCCPCH and
PCCPCH
USccpch po1 PO1 TS 25.433
S-CCPCH TFCI Field Power
Offset
USccpch po3 PO3 TS 25.433
S-CCPCH Pilot Field Power
Offset
UPrach UPrach N/A N/A
PRACH Configuration Object
ID
UPrach commPhyChanelId
Common
Physical
Channel ID
TS 25.433
PRACH Common Physical
Channel ID
UPrach prachType N/A N/A Type of PRACH Preamble
UPrach rachTti
Transmission
time interval;
Transmission
Time Interval
TS 25.331;
TS 25.433
RACH TTI
UPrach signature
Available
Signature;
Preamble
Signatures
TS 25.331;
TS 25.433
Available Signature
UPrach availSubChanNum
Available Sub
Channel
Number; RACH
Sub Channel
Numbers
TS 25.331;
TS 25.433
PRACH Available
Subchannel Number
UPrach preamScraCode
Preamble
scrambling
code number;
Scrambling
Code Number
TS 25.331;
TS 25.433
PRACH Preamble
Scrambling Code
UPrach permitMaxASC N/A TS 25.331
Permitted Maximum Access
Service Class
UPrach asigStIdx
Available
signature End
Index
TS 25.331
Available Signature Begin
Index
UPrach asigEndIdx
Available
signature Start
Index
TS 25.331
Available Signature End
Index
UPrach asubChNum
Assigned Sub-
Channel
Number
TS 25.331 Assigned Subchannel No.
UPrach psfNum N/A TS 25.331
Persistence Scaling Factor
Number
UPrach pSF
Persistence
scaling factors
TS 25.331 Persistence Scaling Factor
UPrach ac2ASCMap
AC-to-ASC
mapping
TS 25.331 AC-to-ASC Mapping
UPrach dynPstLevelInit
Dynamic
persistence
level
TS 25.331
Initial Dynamic Persistence
Level
UPrach mmax
Preamble
Retrans Max
TS 25.331;
TS25.321
Maximum Number of
Preamble Ramping Cycles
UPrach preamThs
Preamble
Threshold
TS 25.433
Detected Preamble
Threshold
UPrach constVal Constant value TS 25.331
PRACH Initiation Tx Power
Constant Value
UPrach pRStep
Power Ramp
Step
TS 25.331
PRACH Preamble Power
Ramp Step
UPrach maxPreamRetrans
Preamble
Retrans Max
TS 25.331
Maximum Number of
Preamble Being Transmitted
UPrach rachCtcId
Common
Transport
Channel ID
TS 25.433
RACH Common Transport
Channel ID
UAich UAich N/A N/A
AICH Configuration Object
ID
UAich commPhyChanelId
Common
Physical
Channel ID
TS 25.433
AICH Common Physical
Channel ID
UAich aichTranTime
AICH
transmission
timing; AICH
Transmission
Timing
TS 25.331;
TS 25.433
AICH Transmission Timing
UMich UMich N/A N/A
MICH Configuration Object
ID
UMich commPhyChanelId
Common
Physical
Channel ID
TS 25.433
MICH Common Physical
Channel ID
UMich niNumPerFrame
Number of NI
per frame;
MICH Mode
TS 25.331;
TS 25.433
Number of NI per Frame
UMich michPwr
MICH Power
offset; MICH
Power
TS 25.331;
TS 25.433
MICH Power
ULdCtrl ULdCtrl N/A N/A
Load Control Information
Object ID
ULdCtrl
maxNumUeOfDecR
at
N/A N/A
Maximum Number of UE
Decreasing Rate When
Congestion
ULdCtrl decGbrSw N/A N/A
Switch for Shielding GBR
Reduction Shared by Uplink
and Downlink
ULdCtrl maxGbrDecNum N/A N/A
Maximum Number of
Services Whose GBR Can
Be Decreased in Load
Control Every Time Shared
by Uplink and Downlink
ULdCtrl decRateSw N/A N/A
Switch of Rate Downgrade
ahead of Preemption in
Congestion
ULdCtrl forceHoSw N/A N/A
The Switch of Forced
Handover for Online Users in
Congestion
ULdCtrl forceRabRelSw N/A N/A
The Switch of Forced Call
Drop for Online Users in
Congestion
ULdCtrl forceRabtoFASw N/A N/A
The Switch of Forced RAB to
FACH of the online I/B users
in Congestion
ULdCtrl
ulSeriousOverLdTh
r
N/A N/A
Uplink Serious Overload
Threshold
ULdCtrl ulOverLdThr N/A N/A
Uplink Common Overload
Threshold
ULdCtrl ulRecoverLdThr N/A N/A
Threshold for Releasing from
Uplink Overload
ULdCtrl ulLdCtrlDecRateSw N/A N/A
Uplink Switch for Shielding
Rate Reduction
ULdCtrl ulLdCtrlForceHoSw N/A N/A
Uplink Switch for Shielding
Forced Handover
ULdCtrl ulLdCtrlDropSw N/A N/A
Uplink Switch for Shielding
Forced Drop
ULdCtrl ulMaxDecStg N/A N/A
Maximum Number of
Degraded Uplink Load Steps
Every Time
ULdCtrl ulMaxForHoNum N/A N/A
Maximum Number of Uplink
Forced Handover Users
Every Time
ULdCtrl ulMaxDrpUsrNum N/A N/A
Maximum Number of Uplink
Forced Drop Users Every
Time
ULdCtrl
dlSeriousOverLdTh
r
N/A N/A
Downlink Serious Overload
Threshold
ULdCtrl dlOverLdThr N/A N/A
Downlink Common Overload
Threshold
ULdCtrl dlRecoverLdThr N/A N/A
Threshold for Releasing from
Downlink Overload
ULdCtrl dlLdCtrlDecRateSw N/A N/A
Downlink Switch for
Shielding Rate Reduction
ULdCtrl dlLdCtrlForceHoSw N/A N/A
Downlink Switch for
Shielding Forced Handover
ULdCtrl dlLdCtrlDropSw N/A N/A
Downlink Switch for
Shielding Forced Drop
ULdCtrl dlMaxDecStg N/A N/A
Maximum Number of
Degraded Downlink Load
Steps Every Time
ULdCtrl dlMaxForHoNum N/A N/A
Maximum Number of
Downlink Forced Handover
Users or Deleted Radio
Links Every Time
ULdCtrl dlMaxDrpUsrNum N/A N/A
Maximum Number of
Downlink Forced Drop Users
Every Time
ULdCtrl dlAdjustMFPSw N/A N/A
Maximum FACH Power
Adjustment Switch for MBMS
Downlink Load Control
ULdCtrl hsdschOverLdThr N/A N/A
Common Overload
Threshold for HS-DSCH
ULdCtrl hsdschRecoverThr N/A N/A
Threshold for Releasing from
HS-DSCH Overload
ULdCtrl switchToFachSw N/A N/A
Switch of Interactive
Class/Background Class
RAB->FACH for Overload
ULdCtrl nFach N/A N/A
Maximum Users of
Interactive
Class/Background Class
RAB->FACH for Overload
ULdCtrl aglLdDec N/A N/A
Algorithm of Load
Decreasing
ULdCtrl
swchFachDrbcHsp
a
N/A N/A
Switch of Transferring Online
HS-DSCH or E-DCH I/B
Users to CELL_FACH due to
the User Number Limitation
when Attempting to Transfer
ULdCtrl rtwpLoadLowThd N/A N/A RTWP Load Low Threshold
ULdCtrl rtwpLoadMidThd N/A N/A
RTWP Load Middle
Threshold
ULdCtrl rtwpLoadHighThd N/A N/A RTWP Load High Threshold
ULdCtrl tCPLoadLowThd N/A N/A TCP Load Low Threshold
ULdCtrl tCPLoadMidThd N/A N/A TCP Load Middle Threshold
ULdCtrl tCPLoadHighThd N/A N/A TCP Load High Threshold
ULdCtrl codeLoadLowThd N/A N/A Code Load Low Threshold
ULdCtrl codeLoadMidThd N/A N/A Code Load Middle Threshold
ULdCtrl ceLoadLowThd N/A N/A CE Load Low Threshold
ULdCtrl ceLoadMidThd N/A N/A CE Load Middle Threshold
ULdCtrl dpaUNumLowThd N/A N/A
HSDPA User Number Low
Threshold
ULdCtrl dpaUNumMidThd N/A N/A
HSDPA User Number Middle
Threshold
ULdCtrl uPAUNumLowThd N/A N/A
HSUPA User Number Low
Threshold
ULdCtrl uPAUNumMidThd N/A N/A
HSUPA User Number Middle
Threshold
ULdCtrl
mbmsUNumLowTh
d
N/A N/A
MBMS User Number Low
Threshold
ULdCtrl mbmsUNumMidThd N/A N/A
MBMS User Number Middle
Threshold
ULdCtrl sigUNumLowThd N/A N/A
Signal User Number Low
Threshold
ULdCtrl sigUNumMidThd N/A N/A
Signal User Number Middle
Threshold
UScpich UScpich N/A N/A
SCPICH Configuration
Object ID
UScpich commPhyChanelId
Common
Physical
Channel ID
TS 25.433
S-CPICH Common Physical
Channel ID
UScpich scpichPwr
Secondary
CPICH Power
TS 25.433 S-CPICH Power
UScpich mimoScpichPwr N/A N/A MIMO S-CPICH Power
UPich UPich N/A N/A
PICH Configuration Object
ID
UPich commPhyChanelId
Common
Physical
Channel ID
TS 25.433
PICH Common Physical
Channel ID
UPich np
Number of PI
per frame; PICH
Mode
TS 25.331;
TS 25.433
Number of Paging Indicators
per PICH Frame
USrvFunction USrvFunction N/A N/A Service Function Object ID
USubSrv USubSrv N/A N/A
Service Basic Configuration
Object ID
USubSrv srvType N/A N/A Sub-Service
USubSrv srvInd
Transmission
Mode
TS25.423 Service Indicator
USubSrv minBitRate N/A N/A Minimum Bit Rate
USubSrv maxBitRate
Maximum Bit
Rate
TS 25.413 Maximum Bit Rate
USubSrv direction
RAB
Asymmetry
Indicator;
Unidirectional
DCH Indicator
TS 25.413;
TS25.423
Direction
USubSrv domain
CN Domain
Type
TS 25.413;
TS25.423
CN Domain Indicator
USubSrv trafficClass Traffic Class
TS 25.413;
TS25.423
Traffic Class
USubSrv ptmRlsPerm N/A N/A
P-T-M RB Release
Permission
USubSrv refUDtxDrxProfile N/A N/A Used UE DTX/DRX Profile
USubSrv maxRetransEdch
E-DCH MAC-d
flow maximum
number of
retransmissions
; Maximum
TS 25.331;
TS 25.433;
TS25.423
Maximum Number of
Retransmissions for E-DCH
USubSrv ulEbN0Pc N/A N/A
Uplink Traffic Eb/N0 used in
Uplink Equivalent AMR User
Number Calculation
Algorithm for Power Control
UUeIntMeasPro
file
UUeIntMeasProfile N/A N/A
UE Internal Measurement
Profile Object ID
UUeIntMeasPro
file
profileId N/A N/A Profile Id
UAmrEvtTPUeI
nt
UAmrEvtTPUeInt N/A N/A
UE Transmitted Power Event
Measurement Configuration
for AMR Object ID
UAmrEvtTPUeI
nt
measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UAmrEvtTPUeI
nt
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UAmrEvtTPUeI
nt
measEvtNum N/A TS 25.331
Maximum Event Number of
UE Internal Measurement
UAmrEvtTPUeI
nt
meaEvtId
UE internal
event identity
TS 25.331
UE Internal Measurement
Event Identity
UAmrEvtTPUeI
nt
trigTime Time-to-trigger TS 25.331 Time to Trigger
UAmrEvtTPUeI
nt
txPowerThres
UE Transmitted
Power Tx power
threshold
TS 25.331
UE Transmitted Power
Threshold
UPsEvtTPUeInt UPsEvtTPUeInt N/A N/A
UE Transmitted Power Event
Measurement Configuration
for PS Object ID
UPsEvtTPUeInt measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UPsEvtTPUeInt filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UPsEvtTPUeInt measEvtNum N/A TS 25.331
Maximum Event Number of
UE Internal Measurement
UPsEvtTPUeInt meaEvtId
UE internal
event identity
TS 25.331
UE Internal Measurement
Event Identity
UPsEvtTPUeInt trigTime Time-to-trigger TS 25.331 Time to Trigger
UPsEvtTPUeInt txPowerThres
UE Transmitted
Power Tx power
threshold
TS 25.331
UE Transmitted Power
Threshold
UHoEvtTPUeInt UHoEvtTPUeInt N/A N/A
UE Transmitted Power Event
Measurement Configuration
for Handover Object ID
UHoEvtTPUeInt measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UHoEvtTPUeInt filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UHoEvtTPUeInt measEvtNum N/A TS 25.331
Maximum Event Number of
UE Internal Measurement
UHoEvtTPUeInt meaEvtId
UE internal
event identity
TS 25.331
UE Internal Measurement
Event Identity
UHoEvtTPUeInt trigTime Time-to-trigger TS 25.331 Time to Trigger
UHoEvtTPUeInt txPowerThres
UE Transmitted
Power Tx power
threshold
TS 25.331
UE Transmitted Power
Threshold
UPrdRttUeInt UPrdRttUeInt N/A N/A
UE Rx-Tx Time Difference
Period Measurement
Configuration for Location
Object ID
UPrdRttUeInt measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UPrdRttUeInt filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UPrdRttUeInt prdRptAmount
Amount of
reporting
TS 25.331 Amount of Reporting
UPrdRttUeInt prdRptInterval
Reporting
interval
TS 25.331 Reporting Interval
UEvtRttUeInt UEvtRttUeInt N/A N/A
UE Rx-Tx Time Difference
Event Measurement
Configuration for UTRAN
Object ID
UEvtRttUeInt measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UEvtRttUeInt filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UEvtRttUeInt measEvtNum N/A TS 25.331
Maximum Event Number of
UE Internal Measurement
UEvtRttUeInt meaEvtId
UE internal
event identity
TS 25.331
UE Internal Measurement
Event Identity
UEvtRttUeInt trigTime Time-to-trigger TS 25.331 Time to Trigger
UEvtRttUeInt txRxTDThres
UE Rx-Tx time
difference
threshold
TS 25.331
UE Rx-Tx Time Difference
Threshold
URlEvtRttUeInt URlEvtRttUeInt N/A N/A
UE Rx-Tx Time Difference
Event Measurement
Configuration for RL Timing
Adjustment Object ID
URlEvtRttUeInt measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
URlEvtRttUeInt filterCoeff Filter coefficient TS 25.331 Filter Coefficient
URlEvtRttUeInt measEvtNum N/A TS 25.331
Maximum Event Number of
UE Internal Measurement
URlEvtRttUeInt meaEvtId
UE internal
event identity
TS 25.331
UE Internal Measurement
Event Identity
URlEvtRttUeInt trigTime Time-to-trigger TS 25.331 Time to Trigger
URlEvtRttUeInt txRxTDThres
UE Rx-Tx time
difference
threshold
TS 25.331
UE Rx-Tx Time Difference
Threshold
UPwrLimTPUeI
nt
UPwrLimTPUeInt N/A N/A
UE Transmitted Power Event
Report Object ID for Power
Limitation Judgement
UPwrLimTPUeI
nt
measRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
Measurement Report
Transfer Mode
UPwrLimTPUeI
nt
filterCoeff Filter coefficient TS 25.331 Filter Coefficient
UPwrLimTPUeI
nt
measEvtNum N/A TS 25.331
Maximum Event Number of
UE Internal Measurement
UPwrLimTPUeI
nt
meaEvtId
UE internal
event identity
TS 25.331
UE Internal Measurement
Event Identity
UPwrLimTPUeI
nt
trigTime Time-to-trigger TS 25.331 Time to Trigger
UPwrLimTPUeI
nt
txPowerThres
UE Transmitted
Power Tx power
threshold
TS 25.331
UE Transmitted Power
Threshold
UPriSel UPriSel N/A N/A
Cell Reselection Frequency
and Priority Information
Object ID
UPriSel servCelPriority priority
TS 25.304;
TS 25.331
Absolute Priority of Serving
Cell for Cell Reselection
UPriSel sPrioritySearch1 Sprioritysearch1
TS 25.304;
TS 25.331
CPICH RSCP Measurement
Trigger Threshold for
Absolute Priority Reselection
Criteria (Sprioritysearch1)
UPriSel sPrioritySearch2 Sprioritysearch2
TS 25.304;
TS 25.331
CPICH EcN0 Measurement
Trigger Threshold for
Absolute Priority Reselection
Criteria (Sprioritysearch2)
UPriSel threshServingLow
Threshserving,
low
TS 25.304;
TS 25.331
Serving Cell Reselection
Threshold for Absolute
Priority Reselection Criteria
UPriSel thresServingLow2
Threshserving,
low2
TS 25.331;
TS 25.304
Serving Cell Reselection
Threshold 2 for Absolute
Priority Reselection Criteria
UPriSel utranInterFNum N/A
TS 25.304;
TS 25.331
Number of UTRAN Centre
Frequencies
UPriSel utranUARFCN UARFCN
TS 25.331;
TS 25.423;
TS 25.433;
TS 25.401
UTRAN Absolute Radio
Frequency Channel Number
UPriSel utranPriority priority
TS 25.304;
TS 25.331
Absolute Priority of Inter-
Frequency Layers in UTRAN
UPriSel utranHighThresh Threshx, high
TS 25.304;
TS 25.331
Reselection Threshold for
Inter-Frequency Layers of
High Priority in UTRAN
UPriSel utranLowThresh Threshx, low
TS 25.304;
TS 25.331
Reselection Threshold for
Inter-Frequency Layers of
Low Priority in UTRAN
UPriSel qqualminFDD QqualminFDD
TS 25.304;
TS 25.331
Qqualmin of UTRAN for Cell
Reselection
UPriSel qrxlevminFDD QrxlevminFDD
TS 25.304;
TS 25.331
Qrxlevmin of UTRAN for Cell
Reselection
UPriSel gsmCellGroupNum N/A
TS 25.304;
TS 25.331
Number of GSM Frequency
Groups
UPriSel gsmBandIndicator Band indicator TS 25.331 Gsm Band Indicator
UPriSel startARFCN Starting ARFCN TS 25.331 GSM Starting ARFCN
UPriSel geranPriority priority
TS 25.304;
TS 25.331
Absolute Priority of Inter-RAT
Layers in GERAN
UPriSel qrxlevminGSM QrxlevminGSM
TS 25.304;
TS 25.331
Qrxlevmin of GSM for Cell
Reselection
UPriSel geranHighThresh Threshx, high
TS 25.304;
TS 25.331
Reselection Threshold for
Inter-RAT Layers of High
Priority in GERAN
UPriSel geranLowThresh Threshx, low
TS 25.304;
TS 25.331
Reselection Threshold for
Inter-RAT Layers of Low
Priority in GERAN
UPriSel eutranInterFNum N/A
TS 25.304;
TS 25.331
Number of EUTRAN Centre
Frequencies
UPriSel dlEARFCN
Measurement
Bandwidth
TS 25.331
Downlink EUTRAN Absolute
Radio Frequency Channel
Number
UPriSel eutranPriority priority
TS 25.304;
TS 25.331
Absolute Priority of Inter-RAT
Layers in EUTRAN
UPriSel allowMeasBand EARFCN TS 25.331
EUTRAN Allowed
Measurement Bandwidth
UPriSel eutranHighThresh Threshx, high
TS 25.304;
TS 25.331
Reselection Threshold for
Inter-RAT Layers of High
Priority in EUTRAN
UPriSel eutranHighThres2 Threshx, high2
TS 25.331;
TS 25.304
Reselection Threshold 2 for
Inter-RAT Layers of High
Priority in EUTRAN
UPriSel eutranLowThresh Threshx, low
TS 25.304;
TS 25.331
Reselection Threshold for
Inter-RAT Layers of Low
Priority in EUTRAN
UPriSel eutranLowThresh2 Threshx, low2
TS 25.331;
TS 25.304
Reselection Threshold 2 for
Inter-Rat Layers of Low
Priority in EUTRAN
UPriSel qrxlevminEUTRA
QrxlevminEUTR
A
TS 25.304;
TS 25.331
Qrxlevmin of EUTRAN for
Cell Reselection
UPriSel qqualminEUTRA
QqualminEUTR
A
TS 25.331;
TS 25.304
Qqualmin of EUTRAN for
Cell Reselection
UPriSel threshRsrqInd N/A
TS 25.331;
TS 25.304
Threshold of RSRQ indicator
UPriSel eutraDetectionInd N/A TS 25.331 E-UTRA Detection Indicator
UPlBal UPlBal N/A N/A
Load Balance Information
Object ID
UPlBal initRrcLBSw N/A N/A
Load Balance Switch of
Initial RRC Procedure
UPlBal rabAssLBSw N/A N/A
Load Balance Switch of RAB
Assignment Procedure
UPlBal callHoldLBSw N/A N/A
Load Balance Switch of Call
Holding Procedure
UPlBal initRrcSBSw N/A N/A
Service Balance Switch of
Initial RRC Procedure
UPlBal rabAssSBSw N/A N/A
Service Balance Switch of
RAB Assignment Procedure
UPlBal callHoldSBSw N/A N/A
Service Balance Switch of
Call Holding Procedure
UPlBal dlLdBalPwrSwch N/A N/A
Load Balance Switch for
Downlink Power
UPlBal dlLdBalPwrWeight N/A N/A
Downlink Power Weight for
Load Balance
UPlBal extraCDeltaTrd N/A N/A
Permitted Payload
Difference Downlink
Available Load Threshold in
Inter-frequency Cells
(Power)
UPlBal ulLdBalPwrSwch N/A N/A
Load Balance Switch for
Uplink Interference
UPlBal ulLdBalPwrWeight N/A N/A
Uplink Interference Weight
for Load Balance
UPlBal extraCDeltaTru N/A N/A
Permitted Payload
Difference Uplink Available
Load Threshold in Inter-
frequency Cells
(Interference)
UPlBal ldBalCdSwch N/A N/A
Load Balance Switch for
Code
UPlBal ldBalCdWeight N/A N/A
Code Weight for Load
Balance
UPlBal extraCDeltaCdTrd N/A N/A
Permitted Payload
Difference Downlink
Available Load Threshold in
Inter-frequency Cells (Code)
UPlBal csBalSwch N/A N/A
CS Balance Switch of RAB
Assignment Procedure
UPlBal extraDeltaHsdTrd N/A N/A
Permitted Payload
Difference Downlink
Available Load Threshold in
Inter-frequency Cells
(HSDPA Throughput)
UPlBal extraDeltaHsuTrd N/A N/A
Permitted Payload
Difference Available Load
Threshold in Inter-frequency
Cells (HSUPA Throughput)
UPlBal ldBalHsdSwch N/A N/A
Load Balance Switch for
HSDPA Throughput
UPlBal ldBalCeSwch N/A N/A Load Balance Switch for CE
UPlBal ldBalBwSwch N/A N/A
Load Balance Switch for
Bandwidth
UPlBal dlLdBalHsdWeight N/A N/A
HSDPA Throughput Weight
for Load Balance
UPlBal ulLdBalHsuWeight N/A N/A
HSUPA Throughput Weight
for Load Balance
UPlBal dlCdThdCs N/A N/A
UTRAN Downlink Available
Load Balance Threshold
(Code) for CS
UPlBal dlCdThdR99Ps N/A N/A
UTRAN Downlink Available
Load Balance Threshold
(Code) for R99 PS
UPlBal dlPwrThdCs N/A N/A
UTRAN Downlink Available
Load Balance Threshold
(Power) for CS
UPlBal dlPwrThdCs4G N/A N/A
Inter-RAT Downlink
Available Load Balance
Threshold (Power) for CS
UPlBal dlPwrThdR99Ps N/A N/A
UTRAN Downlink Available
Load Balance Threshold
(Power) for R99 PS
UPlBal ulLdThdCs N/A N/A
UTRAN Uplink Available
Load Balance Threshold
(Interference) for CS
UPlBal ulLdThdCs4G N/A N/A
Inter-System Uplink
Available Load Balance
Threshold (Interference) for
CS
UPlBal ulLdThdR99Ps N/A N/A
UTRAN Uplink Available
Load Balance Threshold
(Interference) for R99 PS
UPlBal dlLdHsThdHsd N/A N/A
UTRAN Downlink Available
Load Balance Threshold
(HSDPAThroughput) for
HSDPA
UPlBal ulLdHsThdHsu N/A N/A
UTRAN Uplink Available
Load Balance Threshold
(HSUPA Throughput) for
HSUPA
UPlBal csHo4MulRabSwch N/A N/A
Switch of CS Handover for
CS+PS in Multi-Carrier
Scenario
UPlBal utraUserNumOff N/A N/A
User Number Offset of
UTRAN for Balance
UPlBal coGsmUserNumOff N/A N/A
User Number Offset of GSM
in Multi-Mode System for
Balance
UPlBal gsmUserNumOff N/A N/A
User Number Offset of GSM
for Balance
UPlBal gsmCelCariNum N/A N/A GSM Cell's Carrier Number
UPlBal rrcDualCarrSw N/A N/A
Dual Carrier Balance Switch
of Initial RRC Procedure
UPlBal
rrcHsLdBaOnDchS
w
N/A N/A
Switch of HSDPA Load
Balance for Signaling on
DCH in RRC Connection
Procedure
UPlBal hspaPlusCapInd N/A N/A HSPA+ Capability Indicator
UPlBal rabHspaPluBalSw N/A N/A
HSPA+ Balance Switch of
RAB Assignment Procedure
UPlBal holdHspaPluBalSw N/A N/A
HSPA+ Balance Switch of
Call Holding Procedure
UPlBal hspaPluBalCapPri N/A N/A HSPA+ Capacity Priority
UPlBal dulCarBalRscpThd N/A N/A
Cpich RSCP Threshold for
Dual Carrier HSDPA
Balance
UPlBal dulCarBalEcNoThd N/A N/A
Cpich EcNo Threshold for
Dual Carrier HSDPA
Balance
UPlBal drRscpQualThrd N/A N/A
Cpich RSCP Threshold for
Directed Retry Triggered by
Inter-RAT Balancing
UPlBal drEcNoQualThrd N/A N/A
Cpich Ec/No Threshold for
Directed Retry Triggered by
Inter-RAT Balancing
UPlBal
ldBalHsdCodFacCh
o
N/A N/A
Factor Choice in HSDPA
Throughput Load Balance
(Code)
UPlBal
ldBalHsdPwrFacCh
o
N/A N/A
Factor Choice in HSDPA
Throughput Load Balance
(Power)
UPlBal
ldBalHsdBandWidF
acCho
N/A N/A
Factor Choice in HSDPA
Throughput Load Balance
(Bandwidth)
UPlBal ldBalHsuSwch N/A N/A
Load Balance Switch for
HSUPA Throughput
UPlBal ldBalHspaStrCho N/A N/A
Load Balance Strategy for
HSPA Service
UPlBal ldBalHsdNumSwch N/A N/A
Load Balance Switch for
HSDPA User Number
UPlBal ldHsdUserNumThd N/A N/A
UTRAN Downlink Available
Load Balance Threshold
(HSDPA User Number) for
HSPA
UPlBal deltaHsdUsrNumTd N/A N/A
Permitted Payload
Difference Downlink
Available Load Threshold in
Inter-frequency Cells
(HSDPA User Number)
UPlBal u2EBalSwch N/A N/A
UTRAN to EUTRAN balance
switch
UPlBal
hoCalRestblLBSwc
h
N/A N/A
Load Balance Switch of
Handover and Call
Reestablishment Procedure
UPlBal
hoCalRestblSBSwc
h
N/A N/A
Service Balance Switch of
Handover and Call
Reestablishment Procedure
UPlBal hoHspaPlusBalSw N/A N/A
HSPA+ Balance Switch of
Handover and Call
Reestablishment Procedure
UPlBal mulRabBlSwch N/A N/A PS+CS balance switch
UMR UMR N/A N/A MR Configuration Object ID
UMR
mrUePrdIntraMeas
Sw
N/A N/A
MR-UE Measurement Type
Switch (Handover)
UMR
mrUePrdInternalMe
asSw
N/A N/A
MR-UE Measurement Type
Switch (Internal)
UMR
mrUePrdQualityMe
asSw
N/A N/A
MR-UE Measurement Type
Switch (Quality)
UMR
mrUePrdLocationM
easSw
N/A N/A
MR-UE Measurement Type
Switch (Location)
UMR
mrUeInitialCallPos
MeasSw
N/A N/A
MR-UE Measurement Type
Switch (Call-Initial)
UMR
mrUeEvIntraInterIR
atMeasSw
N/A N/A
MR-UE Measurement Type
Switch (Event Handover)
UMR
mrUeEvInternalMea
sSw
N/A N/A
MR-UE Measurement Type
Switch (Event Internal)
UMR
mrUeEvQualityMea
sSw
N/A N/A
MR-UE Measurement Type
Switch (Event Quality)
UMR
mrUeEvTrafficVolM
easSw
N/A N/A
MR-UE Measurement Type
Switch (Event Traffic)
UMR
mrRnluPrdQualityM
easSw
N/A N/A
MR-UE Rnlu Periodical
Quality Measurement Type
Switch
UMR
mrUePrdInterFreqM
easSw
N/A N/A
MR-UE Periodical Inter-freq
Measurement Switch
UMR
mrUePrdInterRatMe
asSw
N/A N/A
MR-UE Periodical Inter-rat
Measurement Switch
UMR
mrUeMeasRptInterv
al
N/A N/A
MR-UE Measurement
Reporting Interval
UMR
mrUeMeasRptTrMo
d
Measurement
Report Transfer
Mode
TS 25.331
MR-UE Measurement Report
Transfer Mode
UMR
mrUeLocMeaRptInt
erval
N/A N/A
MR-UE Location
Measurement Reporting
Interval
UMR mrOvdThd N/A N/A MR Overload Threshold
UMR iniMeasRptTrMod
Measurement
Report Transfer
Mode
TS 25.331
MR-UE Measurement Report
Transfer Mode of Initial Call
UMR
mrUeIniCallLocMod
e
N/A N/A
MR-UE Initial Call Location
Measurement Mode
UMR mrUePrdLocMode N/A N/A
MR-UE Periodical Location
Measurement Mode
UMR amrBlerEvtSw N/A N/A
AMR Bler Event
Measurement Switch
UMR amrBlerTotalCrc N/A N/A
AMR Bler Event
Measurement Total CRC
Number
UMR amrBleErrCrc N/A N/A
AMR Bler Event
Measurement Error CRC
Number
UMR amrBlerPat N/A N/A
AMR Bler Event
Measurement Pending After
Trigger CRC Number
UMR nonAmrBlerEvtSw N/A N/A
Non-AMR Bler Event
Measurement Switch
UMR
nonAmrBlerTotalCr
c
N/A N/A
Non-AMR Bler Event
Measurement Total CRC
Number
UMR nonAmrBleErrCrc N/A N/A
Non-AMR Bler Event
Measurement Error CRC
Number
UMR nonAmrBlerPat N/A N/A
Non-AMR Bler Event
Measurement Pending After
Trigger CRC Number
UMR emiMeasInMRSwch N/A N/A
The Switch for the EMI
Function in MR
UMR mrUeAcqRatioCs N/A N/A CS MR-UE Acquisition Ratio
UMR mrUeAcqRatioPs N/A N/A PS MR-UE Acquisition Ratio
UMR mrServiceTypeCs N/A N/A MR Service Type CS Switch
UMR mrServiceTypePs N/A N/A MR Service Type PS Switch
UMR
mrServiceTypeCsP
s
N/A N/A
MR Service Type CS and PS
Switch
UCMR UCMR N/A N/A
Cell MR Configuration Object
ID
UCMR mrUeMeasSwit N/A N/A MR-UE Measurement Switch
UCMR
mrCellRtwpMeasS
wit
N/A N/A
MR-CELL Measurement
Switch (Received Total Wide
Band Power)
UCMR mrCellTcpMeasSwit N/A N/A
MR-CELL Measurement
Switch (Transmitted Carrier
Power)
UCMR
mrCellAppMeasSwi
t
N/A N/A
MR-CELL Measurement
Switch (Acknowledged
PRACH preambles)
UCMR
mrCellGpsTimMeas
Swit
N/A N/A
MR-CELL Measurement
Switch (UTRAN GPS Timing
of Cell Frames for UE
Positioning)
UCMR
mrCellTcpforHsMea
sSwit
N/A N/A
MR-CELL Measurement
Switch (Transmitted carrier
power of all codes)
UCMR
mrCellHsdschRpMe
asSwit
N/A N/A
MR-CELL Measurement
Switch (HS-DSCH Required
Power)
UCMR
mrCellHsdschPbrM
easSwit
N/A N/A
MR-CELL Measurement
Switch (HS-DSCH Provided
Bit Rate)
UCMR
mrCellEdchPbrMea
sSwit
N/A N/A
MR-CELL Measurement
Switch (E-DCH Provided Bit
Rate)
UCMR
mrCellNonServingR
gdcMeasSwit
N/A N/A
MR-CELL Measurement
Switch (E-DCH Non-serving
Relative Grant Down
Commands)
UCMR mrCelMRptIntCoef N/A N/A
MR-CELL Measurement
Reporting Interval Coefficient
UCfnOffset UCfnOffset N/A N/A
CFN Offset Configuration
Object ID
UCfnOffset sigType N/A N/A Signalling Service Type
UCfnOffset fstRecfgInd N/A N/A
Fast ReConfiguration Scene
Indicator
UCfnOffset retranRate N/A N/A
Data Retransmission Rate
Factor over Uu Interface
UCfnOffset uuPktLenInd N/A N/A
Packet Length Type Indicator
over Uu Interface
UCfnOffset cfnOffset N/A N/A CFN Offset Value
USrvBasedHo USrvBasedHo N/A N/A
Handover Configuration
Based on Service Object ID
USrvBasedHo srvHoComStra N/A N/A
Service Handover
Combination Strategy
USrvBasedHo srvHoIndAmr N/A N/A
Service Handover Strategy
Indicator (AMR)
USrvBasedHo srvHoIndCs64 N/A N/A
Service Handover Strategy
Indicator (CS 64K)
USrvBasedHo srvHoIndPsRT N/A N/A
Service Handover Strategy
Indicator (PS RT)
USrvBasedHo srvHoIndPsNRT N/A N/A
Service Handover Strategy
Indicator (PS NRT)
USrvBasedHo amrSrvHoStra N/A N/A
Service Handover Strategy
of RNC for AMR
USrvBasedHo cs64SrvHoStra N/A N/A
Service Handover Strategy
of RNC for CS64
USrvBasedHo psRtSrvHoStra N/A N/A
Service Handover Strategy
of RNC for PS RT Service
USrvBasedHo psNrtSrvHoStra N/A N/A
Service Handover Strategy
of RNC for PS NRT Service
UAppSrvType UAppSrvType N/A N/A
Application Service Type
Configuration Object ID
UAppSrvType appSrvType N/A N/A Application Service Type
UAppSrvType trafficClass N/A N/A Service Type
UAppSrvType arpPriorityLevel N/A N/A ARP Priority Level
UAppSrvType arpPremptionCap N/A N/A ARP Preemption Capability
UAppSrvType arpPremptionVul N/A N/A
ARP Preemption
Vulnerability
UAppSrvType arpQueuingAlowed N/A N/A
ARP Queuing Allowed
Capability
UAppSrvType basicPrio N/A N/A Basic Priority
UAppSrvType maxSduSize N/A N/A Maximum SDU Size
UAppSrvType ulGBR N/A N/A Uplink Guaranteed Bit Rate
UAppSrvType dlGBR N/A N/A
Downlink Guaranteed Bit
Rate
UQChat UQChat N/A N/A
QChat Service Configuration
Object ID
UQChat qChatDRXCycleLen N/A N/A QChat DRX Cycle Length
UQChat qChatDSCPValue N/A N/A QChat DSCP Value
UQChat tQchatdormancy N/A N/A QChat Dormancy Timer
UQChat qChatUeMaxNum N/A N/A
Max Number of QChat UE
per RCP
UQChat nReleasedQChat N/A N/A
Number of Released QChat
UE when Over Limit
UQChat postVerifPeriQCh
Post-verification
period
TS 25.331;
TS 25.214
Post-verification Period
Configuration Tag for QChat
Service
UQChat srbDelayQChat
SRB delay;
SRB Delay
TS 25.331;
TS25.423
SRB Delay for QChat
Service
UQChat
dpcchPcpLenQCha
t
PC preamble;
PC Preamble
TS 25.331;
TS25.423
DPCH PC Preamble Length
for QChat Service
UDpiBasPriMap
ping
UDpiBasPriMappin
g
N/A N/A
DPI Basic Priority Mapping
Relationship Object ID
UDpiBasPriMap
ping
AppSrvPriCls N/A N/A
Application Service Priority
Class
UDpiBasPriMap
ping
BasicPrio N/A N/A Basic Priority
UDpiBasPriMap
ping
DpiBasicPrio N/A N/A DPI Basic Priority
UDpiDrbc UDpiDrbc N/A N/A
Dynamic Radio Bearer
Control Information of DPI
Service Object ID
UDpiDrbc refUDpiAppSrv N/A N/A
Used DPI Application
Service Type
UDpiDrbc refUDrbcProfile N/A N/A
Used Dynamic Radio Bearer
Control Information Profile
UCNPoolRoutin
gFunction
UCNPoolRoutingFu
nction
N/A N/A
CS/PS Pool Routing
Function Object ID
UIDNNSRouting UIDNNSRouting N/A N/A
Configuration of IDNNS
route to Cs/Ps Pool Object
ID
UIDNNSRouting startIdNnsValue N/A N/A Start Value of IDNNS
UIDNNSRouting endIdNnsValue N/A N/A End Value of IDNNS
UIDNNSRouting cSPoolId N/A N/A
Resource Pool Identifier in
CS Domain
UIDNNSRouting pSPoolId N/A N/A
Resource Pool Identifier in
PS Domain
UIMSIRouting UIMSIRouting N/A N/A
Configuration of IMSI route
to Cs/Ps Pool Object ID
UIMSIRouting imsiMapRuleNo N/A N/A IMSI Map Rule No
UIMSIRouting imsiMatchedDigit N/A N/A The Imsi Matched Digit
UIMSIRouting imsiMaskFlag N/A N/A The Imsi Mask Flag
UIMSIRouting cSPoolId N/A N/A
Resource Pool Identifier in
CS Domain
UIMSIRouting pSPoolId N/A N/A
Resource Pool Identifier in
PS Domain
UENbrBlkList UENbrBlkList N/A N/A
Eutran Neighbouring Cell
Black List Object ID
UENbrBlkList stateMode N/A N/A
State Indicator Used for
EUTRAN Blacklist Cell
Configuration
UENbrBlkList eutranFreqBandInd N/A N/A
Eutran Frequency Band
Indicator
UENbrBlkList earfcnDl N/A N/A
Downlink EUTRAN Absolute
Radio Frequency Channel
Number
UENbrBlkList nEutranNum N/A N/A
Number of EUTRAN
Blacklist Cells Per
Frequency
UENbrBlkList neutranCId N/A N/A
Physical EUTRAN Cell
Identity
UImeiBlkList UImeiBlkList N/A N/A Imei for Black List Object ID
UImeiBlkList imeiLen N/A N/A IMEI Length
UImeiBlkList imeiDigit N/A N/A IMEI
UImeiBlkList ImeiUuQaMeasure N/A N/A
IMEI Utility Switch for Barring
Uu Periodical Quality
Measurement
UImeiBlkList ImeiCsLb N/A N/A
IMEI Utility Switch for Barring
CS Load Balance
UImeiBlkList imeiPcSwitch N/A N/A
IMEI Utility Switch for Power
Control
UImeiBlkList imeiUtilityExt N/A N/A IMEI Utility Extension
UImeiBlkList imeiULMaxSirOffset N/A N/A
IMEI Related Offset of Uplink
Maximum SIR Target
UImeiBlkList imeiULMinSirOffset N/A N/A
IMEI Related Offset of Uplink
Minimum SIR Target
UImeiBlkList imeiMaxDlDpchPO N/A N/A
IMEI Related Offset of
Downlink Maximum DPCH
Power
UImeiBlkList imeiMinDlDpchPO N/A N/A
IMEI Related Offset of
Downlink Minimum DPCH
Power
UImeiTacSPID UImeiTacSPID N/A N/A
Imei TAC List for SPID
Object ID
UImeiTacSPID imeiTACLen N/A N/A Length of IMEI TAC
UImeiTacSPID imeiTAC N/A N/A Imei TAC
UImeiTacSPID refUDePri N/A N/A
Used RAN Priority When UE
in Dedicated State
UDePri UDePri N/A N/A
RAN Priority When UE in
Dedicated State Object ID
UDePri rncSPID N/A N/A RNC SPID
UDePri eutranFeqNum N/A TS 25.331
Number of EUTRAN Centre
Frequencies
UDePri eutranFreqBandInd N/A N/A
EUTRAN Frequency Band
Indicator
UDePri dlEARFCN EARFCN TS 25.331
Downlink EUTRAN Absolute
Radio Frequency Channel
Number
UDePri eutranDePriority priority TS 25.331
Dedicated Priority of
EUTRAN
UDePri utranFeqNum N/A TS 25.331
Number of UTRAN Centre
Frequencies
UDePri freqBandInd N/A N/A
UTRAN Frequency Band
Indicator
UDePri dlUARFCN UARFCN TS 25.331
UTRAN UARFCN of the
downlink carrier frequency
UDePri utranDePriority priority TS 25.331 Dedicated Priority of UTRAN
UDePri gsmFeqBandNum N/A N/A Number of GSM Band
UDePri gsmBand Band indicator TS 25.331 Gsm Band Indicator
UDePri gsmDePriority priority TS 25.331 Dedicated Priority of GSM
UMPOProfile UMPOProfile N/A N/A
HS-PDSCH Measurement
Power Offset Profile Object
ID
UMPOProfile profileId N/A N/A
HS-PDSCH Measurement
Power Offset Configuration
Index
UMPO UMPO N/A N/A
HS-PDSCH Measurement
Power Offset Configuration
Object ID
UMPO app64QamInd N/A N/A
Actual Configuration of
HSDPA Evolution Function
of UE in the Cell (64QAM)
UMPO appMimoInd N/A N/A
Actual Configuration of
HSDPA Evolution Function
of UE in the Cell (MIMO)
UMPO appDcHsdpaInd N/A N/A
Actual Configuration of
HSDPA Evolution Function
of UE in the Cell (DC-
HSDPA)
UMPO measPwrOffset
Measurement
Power Offset
TS 25.331;
TS 25.433;
TS 25.423
HS-PDSCH Measurement
Power Offset
Parameter Description Instance Related FG
Value Range and
Step
Unit
This parameter is RNC
Configuration Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
The description of Object and
defined by MO designer,
Generally it is composed of
some business key, such as
"RNCID=1001".
N/A N/A 300 char N/A
User Friendly Name N/A N/A 80 char N/A
The parameter is the network
element identifier and coded in
one NE type.
When NE type is MSCSERVER,
SGSN, MSCSERVER& SGSN,
NE Office Iu Flex 0..4095 N/A
This parameter indicates the
shared network mode. There are
two modes of shared network:
GWCN (Gateway Core Network)
and MOCN Multi-Operator Core
RNC RAN Sharing
0: GWCN
1: MOCN
2: Multi Plmn
0xFF: No Shared
Network
N/A
This parameter indicates the
method of PLMN selection ,
when MOCN is used for network
sharing
RNC RAN Sharing
0: IMSI-based CS
& PS Coordination
1: Random
Selection
N/A
This parameter indicates the type
of transport channel and
signalling rate for initial RRC
connection setup.
RNC
Dynamic Radio
Bearer Control
0: Forced to
CELL_DCH and
Using DCH/DCH
with Low Rate
Signaling
N/A
This parameter indicates where
RNC can get GPS information
from.
RNC Location Service
0: Self
1: Neighbouring
RNC;
2: Exterior
Network
N/A
This parameter indicates the
duration of the inter-sys cell's
load information which is valid to
use.before updating.
RNC Handover Control 0..65535, Step 1 s
This parameter indicates the
downlink Non-Conversational
service maximum size in octets
of the MAC level PDU when an
extended MAC level PDU size is
RNC HSPA Evolution 1..1505, Step 1 bytes
This parameter indicates the
downlink Conversational service
maximum size in octets of the
MAC level PDU when an
extended MAC level PDU size is
RNC HSPA Evolution 1..1505, Step 1 bytes
This parameter indicates the
Uplink Conversational service
maximum size in octets of the
uplink RLC PDU in the flexible
RLC PDU size mode.
RNC HSPA Evolution 2..1505, Step 1 bytes
This parameter indicates the
Uplink Conversational service
minimum size in octets of the
uplink RLC PDU in the flexible
RLC PDU size mode.
RNC HSPA Evolution 2..1505, Step 1 bytes
This parameter indicates the
Uplink Non-Conversational
service maximum size in octets
of the uplink RLC PDU in the
flexible RLC PDU size mode.
RNC HSPA Evolution 2..1505, Step 1 bytes
This parameter indicates the
Uplink Non-Conversational
service minimum size in octets of
the uplink RLC PDU in the
flexible RLC PDU size mode.
RNC HSPA Evolution 2..1505, Step 1 bytes
This parameter indicates the RV
configuration selected by RNC
when the E-DCH Harq
Combining Capability IE in
AUDIT RESPONSE returned by
RNC HSUPA Introduction
0: RV0
1: RV Table
N/A
This parameter indicates the
maximum bit rate with HS-SCCH
Less for Non-VoIP/AMR.
Non-VoIP/AMR services are
allowed to use HS-SCCH Less
RNC HSPA Evolution
0: 16
1: 32
2: 64
3: 128
4: 256
kbps
This parameter specifies the
RRC Redirect for emergency call
function switch.
RNC
Connection
Management
0: Off
1: On
N/A
Specifies the Amr cut decision
when IuUP version including
V1+V2 in the inter-RAT case
RNC
AMR-NB & AMR-
WB
1: Cut
2: Not Cut N/A
Specifies the Amr cut decision
when IuUP version including
V1+V2 in the intra-RAT case
RNC
AMR-NB & AMR-
WB
1: Cut
2: Not Cut N/A
This parameter indicates
whether non emergency CS
service access to CELL_FACH
on RRC process. If this switch is
" Off" , It means non emergency
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates the
time interval of issuing inter-
frequency measurement and
inter-RAT measurement. When
RNC issues inter-frequency
RNC handover control 1..20, Step 1 s
This parameter indicates DC
redirection strategy switch. When
the switch is " On" , if UE
supports DC and the access cell
don't support DC, RNC will
RNC load balance
0: Off
1: On
N/A
This parameter indicates the
maximum number of UE in a cell
whose transport resource will be
released while transport path is
overload.
RNC
Transport Resource
Release Control
0..255 N/A
The parameter indicates
maximum number of
retransmissions of the RRC
CONNECTION SEUTP message
RNC
Connection
Management
0..10 N/A
The parameter indicates the
interval of retransmission of RRC
CONNECTION SETUP
message.
Start: Transmission of RRC
RNC
Connection
Management
0..100, Step 1 100ms
This parameter indicates the
maximum number of
retransmissions of the RRC
CONNECTION RELEASE
COMPLETE.
RNC
Connection
Management
1..8 N/A
This parameter indicates the
maximum number of
retransmissions of the RRC
CONNECTION RELEASE.
RNC
Connection
Management
1..10 N/A
This parameter indicates the
time of determining the
maximum buffering of the voice
frames in PDCP when CS voice
maps on HS-DSCH/E-DCH. If
RNC CS over HSPA 20..200, step 10 ms
This parameter indicates that
after switching from HS-
DSCH/DCH or HS-DSCH/E-DCH
to DCH/DCH triggered by
channel quality or traffic volume,
RNC
Dynamic Radio
Bearer Control
0..65535, Step 1 s
This parameter indicates when
uplink or downlink meets the
requirements for rate adjustment
(upswitching) first, the wait timer
for waiting the opposite direction
RNC
Dynamic Radio
Bearer Control
0..65535, Step 1 100ms
This parameter indicates when
uplink or downlink meets the
requirements for rate adjustment
(downswitching) first, the wait
timer for waiting the opposite
RNC
Dynamic Radio
Bearer Control
0..65535, Step 1 100ms
This parameter defines the time
period the RNC has to wait
before receiving the RADIO
BEARER RECONFIGURATION
COMPLETE when the RNC
RNC
connection
management
1..60, Step 1 s
This parameter indicates
whether Iu uplink data is
delivered in sequence based on
indication of RAB assignment
from CN.
RNC IP UTRAN
0: False
1: True
N/A
his parameter indicates if RNC
supports UE location
measurement over Iur interface
in LCS Function.
RNC Location Service
0: Not Supported
1: Supported
N/A
This parameter indicates if RNC
supports MBMS Multicast Mode
RNC MBMS
0: Not Supported
1: Supported
N/A
This parameter indicates if RNC
supports MBMS Enhanced
Broadcast Mode
RNC MBMS
0: Not Supported
1: Supported
N/A
This parameter indicates if RNC
supports MBMS UE registration
over Iur function.
RNC MBMS
0: Not Supported
1: Supported
N/A
This parameter is used to
indicate whether 8 kbps MBMS
service is supported or not
RNC MBMS
0: Not Supported
1: Supported
N/A
This parameter is used to
indicate whether 16 kbps MBMS
service is supported or not
RNC MBMS
0: Not Supported
1: Supported
N/A
This parameter is used to
indicate whether 32 kbps MBMS
service is supported or not
RNC MBMS
0: Not Supported
1: Supported
N/A
This parameter is used to
indicate whether 64 kbps MBMS
service is supported or not
RNC MBMS
0: Not Supported
1: Supported
N/A
This parameter is used to
indicate whether 128 kbps
MBMS service is supported or
not
RNC MBMS
0: Not Supported
1: Supported
N/A
This parameter is used to
indicate whether 256 kbps
MBMS service is supported or
not
RNC MBMS
0: Not Supported
1: Supported
N/A
This parameter indicates the
Cpich EcNo minimum threshold
for intra frequency handover. If
reported Cpich EcNo is less than
IntraHoEcNoThrd or Cpich
RNC Handover Control -24..0, step 1 dB
This parameter indicates the
Cpich RSCP minimum threshold
for intra frequency handover. If
reported Cpich EcNo is less than
IntraHoEcNoThrd or Cpich
RNC Handover Control -115..-25, step 1 dBm
Specifies the timer for State
Query.
When in FAIL status, the CN
Monitor Module should check the
signalling point and user service
RNC
IU RESOURCE
RESET
10..6000, Step 1 100ms
Specifies the switch for the CBS
function.
RNC CBS
0: Off
1: On
N/A
This parameter is one factor of
the protocolparameter that
indicates the window startpoint of
the PCH FP. DL data frames are
expected to be received after this
Rnc
Node B
Management
0..1279, step 1 ms
This parameter indicates the
window endpoint of the PCH FP.
DL data frames are expected to
be received before this window
endpoint. Time of Arrival Window
Rnc
Node B
Management
0..2559, step 1 ms
This parameter is one factor of
the protocolparameter that
indicates the window startpoint of
the FACH FP. DL data frames
are expected to be received after
Rnc
Node B
Management
0..1279, step 1 ms
This parameter indicates the
window endpoint of the FACH
FP. DL data frames are expected
to be received before this
window endpoint. Time of Arrival
Rnc
Node B
Management
0..2559, step 1 ms
Inactivity Time of E-DCH
Transmission, UE Should Go
Into E-FACH DRX State when
times out.
RNC HSPA Evolution
0: 100
1: 200
2: 400
3: 800
ms
On the State Of E-FACH DRX,
This Parameter Indicates Cycle
Length of Discontinue Receiving
of E-FACH.
RNC HSPA Evolution
0: 4 frames
1: 8 frames
2: 16 frames
3: 32 frames
N/A
On the State of E-FACH DRX,
This Parameter Indicates
Several Frames Using for HS-
DSCH Detection in the Cycle
Length of Discontinue Receiving
RNC HSPA Evolution
0: 1
1: 2
2: 4
3: 8
4: 16
frames
The Parameter Indicates
Whether DRX Operation Can Be
Used By All E_FACH Users. The
value "0" means only UL
E_FACH UE Could Use
RNC HSPA Evolution
0: only UL E_Fach
UE support
1: support all
E_FACH
N/A
Specifies the time delay of IU
Release Resource.
Start: RNC receives a
DOWNLINK DIRECT
TRANSFER message from CN
RNC
IU RESOURCE
RELEASE
1..50, Step 1 100ms
This parameter is used for the
difficult reception of UE in the
connection mode. This
parameter is used to calculate
the paging occasion, that is, a
RNC
Connection
Management
3..9 N/A
This parameter indicates balance
switch based on measurement. If
this switch is on, neighboring
cells with "neighbor" or
"contained in" relation use
RNC Load Balance
0: Off
1: On
N/A
This parameter indicates balance
switch based on measurement. If
the RabMeaBalStaSwch and
CoverMeaBalSwch is on,
balance based on measurement
RNC Load Balance
0: Off
1: On
N/A
This parameter indicates timer of
deactivate compressed mode for
balance strategy based on
measurement. When the timer
expired, if inter-frequency event
RNC Load Balance 1..255, step 1 s
This parameter indicates the
time threshold that the RNC may
resend the MEASUREMENT
CONTROL RELEASE.
When RNC sends
RNC Handover Control 1..255, Step 1 s
This parameter indicates the UE
of Release 4 and before Release
4 Version whether to be
performed heart beat detection.
RNC
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates the UE
of Release 5 Version whether to
be performed heart beat
detection.
RNC
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates the UE
of Release 6 Version whether to
be performed heart beat
detection.
RNC
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates the UE
of Release 7 Version whether to
be performed heart beat
detection.
RNC
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates the UE
of Release 8 and after Release 8
Version whether to be performed
heart beat detection.
RNC
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates the
period of UE heart beat. In order
to avoid UE (before R8)sending
Signalling Connection Release
Indication (SCRI)and release
RNC
Dynamic Radio
Bearer Control
0..65535, Step 1 100ms
This parameter indicates
whether only judge downlink
traffic on heart beat for channel
switching to PCH/IDLE. If it
switches on, means no need to
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates the
BER target adjust timer in fast
OLPC SIR target downward
adjustment based on BER.
When the timer expires, the BER
RNC
Parameter for future
use
0..1000, step 10 ms
Specifies time of Waiting for
RADIO LINK RESTORE
INDICATION.
If the RNC receives a RADIO
LINK SETUP RESPONSE
RNC Radio Link Restore 1..200, Step 1 100ms
The parameter indicates waiting
time length for CELL UPDATE
after RNC sending Radio Link
Deactivation command after RB
Setup/Reconfiguration/Release
RNC
RB Re-
establishment
1..500, Step 1 100ms
The parameter indicates time of
Waiting for CELL UPDATE After
RB Setup/Reconfiguration (not
for hard-handover)/Release
Response Timer Expiration
RNC
RB Re-
establishment
10..200, Step 1 100ms
The parameter indicates Time of
Waiting for RB
Setup/Reconfiguration (not for
hard-handover)/Release
Response over Uu Interface
RNC
RB Re-
establishment
1..10, Step 1 s
The parameter indicate timer
length of waiting for RRC
CONNECTION COMPLETE
Start: Send RRC CONNECTION
SETUP
RNC
Connection
Management
10..100, Step 1 100ms
The parameter indicates whether
apply fast reconfiguration
function when HS service cell
was changed.
RNC
Node B
Management
0: Off
1: On
N/A
his parameter indicates timer
length waiting for SRNS
CONTEXT REQUEST
Start: When cell relocate to
another RAT, the timer is started.
RNC Handover Control 1..500, Step 1 100ms
This parameter indicates timer
length waiting for SRNS DATA
FORWARD COMMAND.
Start: After SRNS send
CONTEXT RESPONSE to CN,
RNC Handover Control 1..500, Step 1 100ms
This parameter indicates timer
length that waiting for IU
RELEASE COMMAND
Start: After SRNS receive DATA
FORWARD COMMAND or timer
RNC Handover Control 1..500, Step 1 100ms
Network resource identifier (NRI)
is unique to identify the CN node
in a pool area of CS/PS domain,
it is allocated by CN node and
included in TMSI/P-TMSI to
NE Office Iu Flex
0~10, 0: not
Support IU FLEX
N/A
Network resource identifier (NRI)
is unique to identify the CN node
in a pool area of CS/PS domain,
it is allocated by CN node and
included in TMSI/P-TMSI to
RNC Iu Flex 0..10 N/A
This parameter indicates
whether the CN assignment
GBR of AMR service is forcibly
reserved in Iu UP V1, when the
CN assignment GBR is not
RNC
AMR-NB & AMR-
WB
0: False
1: True
N/A
This parameter indicates
Location Mode Method.The
Location mode method includes
RNC location and SAS
location.RNC location uses RNC
RNC Location service
0: RNC Location
Mode
1: SAS Location
Mode
N/A
This parameter indicates the
QChat is supported or not
RNC QChat
0: Not Supported
1: Supported
N/A
RNC Switch of Fast Return to E-
UTRAN
RNC Handover control
0: Off
1: On
N/A
The switch of controlled whether
or not reserved RUB for one
specific UE
Rnc
Connection
management
0: Off
1: Switch On ,
RUP Reserved for
high-version UE
2: Switch On, RUP
N/A
Management the protocol
version of UE for reserved RUB
Rnc
Connection
management
0: No Reserved
RUB
1: R3
2: R4
3: R5
N/A
This parameter indicates which
target Cell judgment strategy
adopt for access/handover
algorithm in shared network.
RNC Handover Control
0: Judgment
Based on
Authorization
Information
1: Judgment
N/A
This parameter indicates
whether support HCS or not in
Cell Reselection and in
Handover.
RNC Handover Control
0: Not Support
HCS
1: Support HCS in
Cell Reselection,
Not Support HCS
N/A
This parameter indicates
whether to judge the IE "Device
type" in the message "RRC
Connection Setup Complete" ,
when judge the conditions
RNC
Dynamic Radio
Bearer Control
0: FALSE
1: TRUE
N/A
Specifies the CDT overload
control function.
RNC Call Detail Trace 1..100, Step 1 %
This parameter indicates the
SRNC waiting time for the
RECONFIGURATION
COMPLETE message from the
UE when the UE leaving PCH or
RNC
connection
management
1..60, Step 1 s
This parameter indicates when
RRC on HS channel whether it is
also allowed to setup on DC.
When it is "Yes", if secondary
carrier of DC has already been
RNC Load Balance
0: FALSE
1: TRUE
N/A
This parameter indicates the
switch of using DL POWER
CONTROL REQUEST
information in Iur Interface to
control power balancing.
RNC Power Control
0: Off
1: On
N/A
This parameter indicates the
offset of CPICH Ec/No in Iur
interface relative to the CPICH
Ec/No of measurement result.
The CPICH Ec/No in Iur interface
RNC Power Control 0..30, step 1 dB
This parameter indicates
whether the switch to
URA_PCH/CELL_PCH is
allowed for the UE of Release 99
and Release 4.
RNC
Dynamic Radio
Bearer Control
0: Not Allowed
1: Allowed N/A
The switch of controlled whether
or not started UTRA SI
Rnc Handover Control
0: Off
1: On
N/A
This parameter indicates the
detection period which is used by
user plane for application service
detection.
RNC
Deep Packet
Inspection
0..65535, step 20 ms
This parameter indicates the
total data number should be
reached during one application
service detection period. If the
total data number is smaller than
RNC
Deep Packet
Inspection
1..65535, Step 1 bytes
This parameter indicates the
minimum time that the user
plane reports the application
service type to control plane
again after last report.
RNC
Deep Packet
Inspection
0..65535, step 20 ms
This parameter indicates that the
RNC support the user-defined
PLMN selection or not
RNC RAN Sharing
0: FALSE
1: TRUE
N/A
This parameter indicates that the
RNC can Broadcast the Multiple
PLMNs in MIB or not
RNC RAN Sharing
0: FALSE
1: TRUE
N/A
This parameter indicates
whether the RNC Send RL
SETUP and RRC CONNECTION
SETUP in parallel when setting
up RRC CONNECTION
RNC
Connection
Management
0: Off
1: On
N/A
This parameter indicates the
applied feature info of Ue for
Routing CN
RNC RAN Sharing
0: None
1: Use IMSI
2: Use IDNNS
N/A
This parameter indicates
maximum CS service number
when the board is permit power
off based on energy
conservation.
RNC
Dynamic Load
Energy Saving
0..65535 N/A
This parameter indicates
maximum UE context number
when the board is permit power
off based on energy
conservation.
RNC
Dynamic Load
Energy Saving
0..65535 N/A
This parameter indicates
maximum CS service number
when the board is permit power
off based on board attribution
switch.
RNC
Dynamic Load
Energy Saving
0..65535 N/A
This parameter indicates
maximum UE context number
when the board is permit power
off based on board attribution
switch.
RNC
Dynamic Load
Energy Saving
0..65535 N/A
Before the board power off, it will
delay a period which the
parameter is configured in order
that most service auto hang
off.thus will decrease the call
RNC
Dynamic Load
Energy Saving
0..65535, Step 1 s
This parameter indicates
whether using Faster L1 DCH
synchronization, set the Post-
verification period in Uu interface
with value 'TRUE'.
RNC
Connection
Management
0: Off
1: On
N/A
Specifies the user admission
control threshold after the CMP
board is normal run. If the
threshold value is 0, it means
there is no need to do user
RNC Admission Control 0..65535, Step 1 times
Specifies the user admission
control threshold after the DMP
board is normal run. If the
threshold value is 0, it means
there is no need to do user
RNC Admission Control 0..65535, Step 1 times
The parameter indicates waiting
time length for CELL UPDATE
after RNC sending Radio Link
Deactivation command after RB
Setup/Reconfiguration/Release
RNC
connection
management
1..500, Step 1 100ms
This parameter indicates RNC
support Virtual LAC Paging or
not
RNC
Connection
Management
0: Not Supported
1: Supported
N/A
This parameter indicates the
power offset for white list users.
When calculate the initial DL
power for the white list user, this
parameter is an additional power
RNC VIP QoS Guarantee -50..50, step 0.1 dB
This parameter indicates
whether Forced Call Drop will be
triggered when the ordinary PS
user number online in
CELL_DCH state is larger than
RNC VIP QoS Guarantee
0: Off
1: On
N/A
This parameter indicates
whether to Notify neighbor cell
that VIP User exists in the cell
RNC VIP QoS Guarantee
0: Off
1: On
N/A
This parameter indicates the
Lowest Priority of Neighbor Cell
Notified of VIP Existing when VIP
Exists and Neighbor Cell need to
be notified.Only the neighbor cell
RNC VIP QoS Guarantee 0..2 N/A
Parameter Function: This
parameter indicates whether the
white list function is open or not.
Configuration Rule: it's feature
switch and not adjustable. if the
RNC VIP QoS Guarantee
0: Off
1: On
N/A
This parameter indicates the
additional size for uplink SIR
target increasing when
consecutive error TB occurs. If
the last two error TBs is
RNC Power Control 0..1, step 0.1 dB
This parameter indicates the
valid time window for TB in the
shield period. In this time window
after the shield period of SIR
target increasing, if the SIR
RNC Power Control 0..65535, step 1 10ms
This parameter indicates when
board power off, the wait timer
for waiting the RRC release or
DSCR by one step.
RNC handover control 0..65535, Step 1 s
Maximum Call Capacity RNC N/A 0..65535, Step: 1 KErl
Maximum Data Process Capacity RNC N/A 0..65535, Step: 1 Mbyte/s
This parameter indicates Load
Balance in MSC Pool for CORBA
interface
RNC and
PLMN
Basic Identification
Parameter
0..100, Step 1 %
This parameter indicates Load
Balance in SGSN Pool for
CORBA interface
RNC and
PLMN
Basic Identification
Parameter
0..100, Step 1 %
When VipSpecFreqSwch is true,
RNC will balance VIP users to
VIP carrier frequency. Non-VIP
user will be balanced to Non-VIP
carrier frequency in case of high
RNC Load Balance
0: Off
1: On
N/A
The parameter indicates the
downlink carrier central
frequency of CS VIP.
RNC Load Balance 0..16383 N/A
This parameter indicates switch
of forced handover strategy for
VIP carrier frequency.
RNC Congestion Control
0: Off
1: On
N/A
Switch of Optimization When
Load Balance Fail in RAB
SEUTP procedure.
RNC Load Balance
0: Off
1: On
N/A
The parameter indicates the
downlink carrier central
frequency of PS VIP.
RNC Load Balance 0..16383 N/A
This parameter indicates
whether the RNC Send RL
SETUP and ACTIVE SET
UPDATE parallelly when Soft
Add Handover.
RNC
Connection
Management
0: Off
1: On
N/A
Specifies the function switch of
whether RNC should execute
DSCR procedure when
transferring unsuccessfully from
common connected RRC status
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
The parameter is the switch of
IMEI blacklist.
Rnc
ZTE UMTS User
Equipment Fault
Aversion FG
0: Off
1: On
N/A
The switch of response the LTE
Son Transfer request.
RNC Handover Control
0: Off
1: On
N/A
The period of RNC starting the
SON Transfer.
RNC Handover Control 0..65535, Step 1 s
Son Transfer Request Number
Threshold in one second
RNC Handover Control 0..65535, Step 1 times
Response the Son Transfer
message Number Threshold in
one second
RNC Handover Control 0..65535, Step 1 times
This parameter indicates if
consider the target cell load
Information during the inter
system handover procedure..
RNC and
PLMN
Handover Control
0: Not Supported
1: Supported
N/A
This parameter indicates the
number of setup cells in one
period.
RNC CPU Loadctrl
V3: 0..200, Step 1
V4: 0..400, Step 1
times
This parameter indicates the
number of cells updating SIB3
when Iu overloads or is not
accessible.
RNC
Connection
Management
1..65535 N/A
This parameter indicates the
time interval updating SIB3
among cells when Iu overloads
or is not accessible.
RNC
Connection
Management
1..65535, Step 1 s
This parameter indicates the
number of cells updating SIB3
when Iu is changed from
overloads to unoverload or from
not accessible to accessible and
RNC
Connection
Management
1..65535 N/A
This parameter indicates the
time interval updating SIB3
among cells when Iu overloads
or is not accessible and when
the DSAR switch is changed.
RNC
Connection
Management
1..65535, Step 1 s
This parameter indicate the multi-
cell E-DCH transport bearer
mode.
For multi-cell E-DCH Transport
Bearer Mode is "Separate Iub
RNC HSPA EVOLUTION
0: Separate Iub/Iur
Transport Bearer
Mode
1: UL Flow
Multiplexing Mode
N/A
Downlink Reserved Bandwidth
for VIP UE's I/B Traffic
RNC VIP QoS Guarantee 0..65535, Step 1 kbps
The parameter indicates the
switch of filtering the incomplete
neighboring cells in SIB.If the
value of the parameter is 1 (On),
RNC will filter the neighboring
RNC
NodeB
Management
0: Off
1: On
N/A
This parameter indicates the
Admission Control Switch for
High Priority Traffic when E-DCH
User Number Resource
Congestion in CELL_DCH State
RNC Admission Control
0: Off
1: On
N/A
This parameter indicates the
inter handover method is
periodical method or event
method.
RNC Handover Control
0: Periodical
Method
1: Event Method
N/A
The parameter indicates the inter-
RAT handover method is
periodical method or event
method.
RNC Handover Control
0: Periodical
Method
1: Event Method
N/A
Switch of Fast Reconfiguration
Function for Relocating into
DRNC
RNC
Node B
Management
0: Off
1: On
N/A
This parameter indicates the
switch of EMI function in CDT-
CR
RNC
RAN Performance
Monitor
0: Off
1: On
N/A
This parameter indicates the
Switch of VIP User State
Transfer
RNC VIP QoS Guarantee
0: Off
1: On
N/A
When inter-rat measurement is
initialized, if intra-frequency
handover is triggered, inter-rat
measurement will be
update/modify. due to the
RNC Handover Control
0: False
1: True
N/A
This parameter indicates the
Timer that RNC receives the
Paging Type1 Message
Respons.
RNC
Basic Identification
Parameter
1..60, Step 1 s
This parameter indicates the
Maximum Satellite Number in
Position measurement Control
Message
RNC Location service 1..16 N/A
This parameter indicates the
minimum tolerable data rate
threshold for new traffic
accessing the FACH. If the data
rate of each service on the
RNC Admission Control
100..14400, step
100
bps
Switch of Permit PS Handover
from LTE to UTRAN Because of
CSFB
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether the RNC fasten
releasing service when the RNC
receive UCIU ERROR.
RNC
Connection
Management
Feature Description
0: Off
1: On
N/A
This parameter indicates
whether the RNC fasten
releasing service when the RNC
receive RL FAILURE.
RNC
Connection
Management
Feature Description
0: Off
1: On
N/A
This parameter indicates
whether RNC dicard redirection
LU-Reject/Attach-Rej when the
link of subsequent Iu is break
RNC
Connection
Management
0: Discard
1: No Discard
N/A
This parameter indicates
whether the RNC switch on the
DSAR function. If the RNC
switch on the function, the cell
may restrict some access class
RNC
Connection
Management
0: Off
1: On
N/A
This parameter indicates
whether switching off the cell
smartly is supported.
RNC
Intelligent Carrier
Power Control
0: Off
1: On
N/A
This parameter indicates the Rnc
switch for handover based on
uplink Bler. When the switch is
"Off", the function is turned off;
when the switch is "On", judge
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates the Rnc
switch for handover based on
transmit power. When the switch
is "Off", the function is turned off;
when the switch is "On", judge
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates the how
long time to admit all UEs when
the sscop link congestion
disappeared
RNC Admission Control 0..600, Step 1 s
This parameter indicates the
IMEI based power control
function switch. When this switch
is on, some power control
parameters can be configured
Rnc Power Control
0: Off
1: On
N/A
The parameter indicates license
which to control several
enhanced handover features as
follows:
1 When RNC is waiting
RNC Handover Control
0: Off
1: On
N/A
Global Reserved Parameter 1 RNC
parameter for future
use
0..255 N/A
Global Reserved Parameter 2 RNC
parameter for future
use
0..255 N/A
Global Reserved Parameter 3 RNC
parameter for future
use
0..255 N/A
Global Reserved Parameter 4 RNC
parameter for future
use
0..255 N/A
Global Reserved Parameter 5 RNC
parameter for future
use
0..255 N/A
Global Reserved Parameter 6 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 7 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 8 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 9 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 10 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 11 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 12 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 13 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 14 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 15 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 16 RNC
parameter for future
use
0..4294967295 N/A
Global Reserved Parameter 17 RNC
parameter for future
use
0..4294967295 N/A
Global Reserved Parameter 18 RNC
parameter for future
use
0..4294967295 N/A
Global Reserved Parameter 19 RNC
parameter for future
use
0..4294967295 N/A
Global Reserved Parameter 20 RNC
parameter for future
use
0..4294967295 N/A
Global Reserved Parameter 41 RNC
parameter for future
use
0..255 N/A
Global Reserved Parameter 42 RNC
parameter for future
use
0..255 N/A
Global Reserved Parameter 43 RNC
parameter for future
use
0..255 N/A
Global Reserved Parameter 44 RNC
parameter for future
use
0..255 N/A
Global Reserved Parameter 45 RNC
parameter for future
use
0..255 N/A
Global Reserved Parameter 46 RNC
parameter for future
use
0..65535 N/A
bit11: 0/1
0: not to judge whether ack
exists in RLC when PS state
transfer to PCH/IDLE or PS 0/0
1: need to judge whether ack
RNC HSPA Evolution 0..65535 N/A
Bit0, Bit1: Switch of HSUPA TTI
Configuration Method for VIP
User. 0: off; 1: 2ms E-TTI is
initially allocated, and 2ms/10ms
TTI transfer is allowed; 2: 2ms E-
RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 49 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 50 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 51 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 52
bit0=0/1: Not allow R5 UE to
PCH /Allow R5 UE to PCH
bit1=0/1: Release the traffic
RNC
parameter for future
use
0..65535 N/A
the ageing time of DMP, Unit:
Minutes; if the value is less than
1, the value is as 1
RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 54 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 55 RNC
parameter for future
use
0..65535 N/A
Global Reserved Parameter 56 RNC
parameter for future
use
0..8388607 N/A
Global Reserved Parameter 57 RNC
parameter for future
use
0..8388607 N/A
Global Reserved Parameter 58 RNC
parameter for future
use
0..8388607 N/A
Global Reserved Parameter 59 RNC
parameter for future
use
0..8388607 N/A
Global Reserved Parameter 60 RNC
parameter for future
use
0..8388607 N/A
This parameter indicates
extended Information of RNC
object ID.
RNC
Basic Identification
Parameter
0..2147483647,
Step 1
N/A
This parameter indicates the
switch of CQI feedback cycle
and CQI repetition factor
adjustment based on load. If the
switch is on, the CQI feedback
RNC Power Control
0: Off
1: On
N/A
This parameter indicates the
DCH 27.2kbps Rate whether to
be used for VIP user's initial
RRC Connection Setup.
RNC VIP
0: Off
1: On
N/A
This parameter indicates the
switch of the RRC connection
access strategy for bad
coverage.If the parameter is
"On", RRC connection will be
RNC
Dynamic Radio
Bearer Control
0: Not Supported
1: Supported
N/A
This parameter is used to
indicate whether to decrease the
AMR initial data rate in bad
coverage.
UTRAN Cell
AMR-NB & AMR-
WB
0: Off
1: On
N/A
This parameter indicates RNC
support filling SAI corresponding
to at least one of the cells from
which the UE is consuming radio
resources.
RNC
Connection
Management
0: False
1: True
N/A
This parameter indicates E-DCH
Throughput Measurement Event
4B Counter Threshold for the HS-
DSCH/E-DCH to HS-DSCH/DCH
Channel Switching.When the
RNC
Dynamic Radio
Bearer Control
1..65535 N/A
This parameter indicates the
switch for ARP
(Allocation/Retention Priority)
based BLER function. When the
switch is on, users with different
RNC Power Control
0: Off
1: On
N/A
This parameter indicates the
default ARP
(Allocation/Retention Priority)
segment. When the function
switch for ARP based BLER is
RNC Power Control
0: Golden;
1: Silver;
2: Bronze
N/A
This parameter indicates the
ARP (Allocation/Retention
Priority) threshold of golden
priority subscriber used in power
control. ARP of the golden
RNC Power Control 1..15 N/A
This parameter indicates the
ARP (Allocation/Retention
Priority) threshold of bronze
priority subscriber used in power
control. ARP of the bronze
RNC Power Control 1..15 N/A
This parameter indicates the
load filter coefficient. It is used in
uplink RoT and downlink
effective load filter.
The filter formula as following:
RNC Power Control 0..1, step 0.01 N/A
This parameter indicates the
user number filter coefficient. It is
used in the uplink equivalent
user number filter.
The filter formula as following:
RNC Power Control 0..1, step 0.01 N/A
This parameter indicates the SIR
target rapid convergence switch.
When this switch is on, the SIR
target can be decreased rapidly
to the SIR target based on
RNC Power Control
0: Off
1: On
N/A
This parameter indicates the
uplink BER OLPC algorithm
switch
RNC Power Control
0: Off
1: On
N/A
This parameter indicates the
shield period switch
RNC Power Control
0: Off
1: On
N/A
This parameter indicates the
BER filter coefficient.
RNC Power Control 0..1, step 0.01 N/A
This parameter indicates which
normal outer loop power control
algorithm is used. There are two
kinds of normal outer loop power
control algorithm: BLER Target
RNC Power Control
0: BLER Target
Algorithm
1: Threshold
Algorithm
N/A
This parameter indicates the
time window size of opening
shield period
RNC Power Control 0..2000, Step 1 ms
This parameter indicates the
threshold of opening shield
period
RNC Power Control 0.1..10, step 0.1 dB
This parameter indicates the
shield period
RNC Power Control 0..2000, Step 1 ms
Switch of RXLEV-NECELL
indication in oldBSS_ToNewBSS
when inter-system handover to
GSM.
RNC Handover Control
0: Off
1: On
N/A
If cell has multi-plmn, RNC
modify the PLMN of NAS
message sent to UE to
COMMON PLMN or not
RNC RAN Sharing
0: Don't Modify
1: Modify
N/A
Fill Cn Information IE in Uu
Message or Not
RNC RAN Sharing
0: Don't Fill
1: Fill
N/A
This parameter indicates the
mode of PS handover from
UTRAN to Eutran. PS handover
or redirection can be adopted
based on UE capability.
RNC Handover Control
0: PS Handover
1: Redirection
N/A
This parameter indicates timer of
deactivate compressed mode for
Fast Return to Eutran.If
compressed mode is initialized
due to fast return to Eutran, the
RNC Handover Control 1..255, step 1 s
This parameter indicates
whether using Faster L1 DCH
synchronization for VIP user.
Faster L1 DCH synchronization
function means: In DCH
RNC VIP QoS Guarantee
0: Off
1: On
N/A
Specifies the switch of CS
paging resend in PCH status.
RNC
Connection
Management
0: Off
1: On
N/A
Specifies the timer length of CS
paging resend in PCH status.
RNC
Connection
Management
1..255, Step 1 100ms
Location Area Configuration
Object ID
UTRAN Cell
Related
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
LAC of the cell. It is used to
determine the location of the MS.
The coverage area of each
PLMN is divided into many
UTRAN Cell
Handover Control
/MULTIPLMN
1..0xfffd, 0xffff N/A
This parameter indicates Routing
Area Configuration Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
routing area code of the cell. It is
only valid when supporting PS
services. The routing area code
identifies one routing area in
UTRAN Cell MULTIPLMN 0..255 N/A
This parameter indicates Service
Area Configuration Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the CS
+ PS domain service area code.
Service area code uniquely
identifies one or several cells
belonging to the same Location
RNC
Basic Identification
Parameter
0..65535 N/A
Service Area Configuration in BC
Domain Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
Indicates the service area code
for BC domain the cell is
referenced. It is required to be
configured when the cell
supports the cell broadcast
RNC CBS 0..65535 N/A
Logic RNC Configuration Object
ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
number of GSM BCCH
distribution tables. When UTRAN
network and BSS network belong
to the same PLMN at the same
RNC and
PLMN
Connection
Management
0..32 N/A
This parameter indicates the
frequency lower range of a
specific GSM BCCH distribution
table that the local PLMN
controls. When UTRAN network
RNC and
PLMN
Connection
Management
0..1023 N/A
This parameter indicates The
frequency upper range of a
specific GSM BCCH distribution
table that the local PLMN
controls. When UTRAN network
RNC and
PLMN
Connection
Management
0..1023 N/A
This parameter indicates the
number of UTRAN FDD
frequency range controlled by
the local PLMN.
When UE comes back to idle
RNC and
PLMN
Connection
Management
0..32 N/A
This parameter indicates the
frequency lower range of a
specific UTRAN FDD frequency
that the local PLMN controls.
When UE state is transferred
RNC and
PLMN
Connection
Management
10562..10838,
9662..9938, 412,
437, 462, 487,
512, 537, 562,
587, 612, 637,
N/A
This parameter indicates the
frequency upper range of a
specific UTRAN FDD that the
local PLMN controls. When UE
state is transferred from RRC
RNC and
PLMN
Connection
Management
10562..10838,
9662..9938, 412,
437, 462, 487,
512, 537, 562,
587, 612, 637,
N/A
This parameter indicates
whether AMR rate adjustment is
supported in the RNC.
RNC and
PLMN
AMR-NB & AMR-
WB/Admission
Control
0: Off
1: On
N/A
This parameter indicates
whether the QoS negotiation
during RAB establishment or
relocation and the QoS
renegotiation during the
RNC
Services and Radio
Access Bearers
0: Switch Off QoS
Negotiation,
Switch Off QoS
Renegotiation
1: Switch Off QoS
N/A
Specifies the MR function switch.
RNC and
PLMN
RAN Performance
Monitor
0: Off
1: On
N/A
This parameter indicates
whether the integrity protection
algorithm UIA1 is supported.
RNC and
PLMN
Connection
Management
0: Not Supported
1: Supported
N/A
This parameter indicates
whether the integrity protection
algorithm UIA2 is supported.
RNC and
PLMN
Connection
Management
0: Not Supported
1: Supported
N/A
This parameter indicates the
encryption algorithm 0 that the
RNC supports.
RNC
Connection
Management
0: Not Supported
1: Supported
N/A
This parameter indicates the
encryption algorithm 0 that the
RNC supports.
RNC and
PLMN
Connection
Management
0: Not Supported
1: Supported
N/A
This parameter indicates the
encryption algorithm 0 that the
RNC supports.
RNC and
PLMN
Connection
Management
0: Not Supported
1: Supported
N/A
This parameter indicates
whether AMR 4.75 kbps is used
or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether AMR 5.15 kbps is used
or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether AMR 5. 90 kbps is used
or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether AMR 6.70 kbps is used
or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether AMR 7.40 kbps is used
or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether AMR 7.95 kbps is used
or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether AMR 10.2 kbps is used
or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether AMR 12.2 kbps is used
or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether wideband AMR 6.60
kbps is used or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether wideband AMR 8.85
kbps is used or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether wideband AMR 12.65
kbps is used or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether wideband AMR 14.25
kbps is used or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether wideband AMR 15.85
kbps is used or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether wideband AMR 18.25
kbps is used or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether wideband AMR 19.85
kbps is used or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether wideband AMR 23.05
kbps is used or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates
whether wideband AMR 23.85
kbps is used or not.
RNC and
PLMN
AMR-NB & AMR-
WB
0: Not Used
1: Used
N/A
This parameter indicates the
maximum time that the RNC may
store Permanent NAS UE
Identity IE (and the related
Global CN-ID IE) when NNSF is
RNC and
PLMN
Iu Flex 1..255, Step 1 s
This parameter indicates the
lower limit of guaranteed bit rate
used for QoS
negotiation/renegotiation for
uplink services.
RNC
Services and Radio
Access Bearers
8, 16, 32, 64, 128,
144, 256, 384,
512, 711, 1024,
1399, 1448, 2048,
2886, 3072, 4096,
kbps
This parameter indicates the
lower limit of guaranteed bit rate
used for QoS
negotiation/renegotiation for
Downlink services
RNC
Services and Radio
Access Bearers
8, 16, 32, 64, 128,
144, 256, 384,
512, 768, 900,
1024, 1200, 1800,
2048, 3650, 4096,
kbps
This parameter indicates the
level number of the negotiated
guaranteed bit rate. This
parameter is shared by uplink
and downlink.
RNC
Services and Radio
Access Bearers
1..17 N/A
Specifies the CDT function
switch.
RNC and
PLMN
Call Detail Trace
0: Off
1: On
N/A
Specifies the IMEI acquisition
switch in the CDT function.
RNC and
PLMN
Call Detail Trace
0: Off
1: On
N/A
This parameter indicates
whether the function of radio link
timing adjusting is used: if the
value is "Off" , the UE internal
Measurement (Event 6G/6F)
RNC Handover Control
0: Off
1: On
N/A
When handover from UMTS to
GSM is failed, the timer is
initialization, and RNC will not
handle inter-Rat measurement
report until the timer is expiry.
RNC Handover Control 0..65535, step 1 s
This parameter indicates
whether inter-frequency and inter-
rat compressed mode will be
configured to UE simultaneously
or not, when inter-frequency cells
RNC handover control
0: Configure Inter-
Frequency and
Inter-Rat
compressed mode
simultaneously
N/A
The parameter indicates whether
RNC support PS handover with
LTE.
RNC Handover Control
0: Off
1: On
N/A
The parameter indicates whether
RNC support SRVCC.
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates the
Initial AMR data rate when cell
load is high. When the cell
effective downlink load is larger
than AmrDlLdThrd or the cell
RNC and
PLMN
AMR-NB & AMR-
WB
0: 4.75kbps
1: 5.15kbps
2: 5.90kbps
3: 6.70kbps
4: 7.40kbps
kbps
This parameter indicates the
Initial AMR data rate when cell
load is high. When the cell
effective downlink load is larger
than AmrDlLdThrd or the cell
RNC and
PLMN
AMR-NB & AMR-
WB
0: 6.60kbps
1: 8.85kbps
2: 12.65kbps
3: 14.25kbps
4: 15.85kbps
kbps
This parameter indicates the
value 'null-NRI' of CS Domain,
when RNC receives a message
with null-NRI, the NAS Node
Selection Function shall be used
RNC and
PLMN
Iu Flex 0..1023, 0XFFFF N/A
This parameter indicates the
value 'null-NRI' of PS Domain,
when RNC receives a message
with null-NRI, the NAS Node
Selection Function shall be used
RNC and
PLMN
Iu Flex 0..1023, 0XFFFF N/A
This parameter indicates the
Traffic Handling Priority (THP)
segment threshold. The THP will
be mapped by RNC to different
THP segment upon this
RNC QoS Guarantee 1..15 N/A
This parameter indicates the
number of uplink rate adjustment
levels.
RNC and
PLMN
QoS
Guarantee/Dynamic
Radio Bearer
Control
1..6 N/A
This parameter indicates the
uplink rate adjustment levels
used by DRBC. The uplink rate
adjustment range is limited by
this parameter.
RNC and
PLMN
QoS
Guarantee/Dynamic
Radio Bearer
Control
8, 16, 32, 64, 128,
144, 256, 384
kbps
This parameter indicates the
number of downlink rate
adjustment levels.
RNC and
PLMN
QoS
Guarantee/Dynamic
Radio Bearer
Control
1..6 N/A
This parameter indicates the
downlink rate adjustment levels
used by DRBC. The downlink
rate adjustment range is limited
by this parameter.
RNC and
PLMN
QoS
Guarantee/Dynamic
Radio Bearer
Control
8, 16, 32, 64, 128,
144, 256, 384
kbps
This parameter indicates the
Drbc strategy configuration index
for not DPI scene.
RNC and
PLMN
Dynamic Radio
Bearer Control
N/A N/A
This parameter indicates
whether CS voice over HSPA is
supported or not. If it is "On", CS
voice over HSPA is allowed,
otherwise not allowed.
RNC CS over HSPA
0: Off
1: On
N/A
This parameter is a switch which
indicates whether the dynamic
radio bearer control algorithm is
supported for the uplink and
downlink services.
RNC
Dynamic Radio
Bearer Control
0: Switch Off in UL
& Switch Off in DL
1: Switch Off in UL
& Switch On in DL
2: Switch On in UL
N/A
This parameter indicates the
switch of E-TTI switching
triggered by user plane
throughput measurement. If this
parameter is set to "On" , the
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates
whether DL DCH rate adjustment
for PS services based on D-TCP
measurement is supported. If
this switch is "Off", it is invalid for
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates
whether UL DCH rate adjustment
for PS services based on UE
transmission power is supported.
If this switch is "Off", it is invalid
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates the
downlink maximum bit rate
threshold for I/B service being
established on CELL_FACH.
When interactive/background
RNC
Dynamic Radio
Bearer Control
0..65535, step 1 kbps
This parameter indicates that
when interactive/background
service is set up initially, if the
uplink maximum bit rate is lower
than the threshold, allocate
RNC
Dynamic Radio
Bearer Control
0..65535, step 1 kbps
This parameter indicates
whether DCH rate adjustment
based on traffic volume
measurement is supported. If
this switch is "Off", it is invalid for
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates
whether transferring from HS-
DSCH to DCH for interactive/
background service based on
event 1F is allowed. If this switch
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates
whether transferring from HS-
DSCH to DCH for streaming
service based on event 1F is
allowed. If this switch is "On" and
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates the
conversational traffic rate
threshold used for determining
I/B PS traffic rate upper limit
when Multi-RABs are
RNC
Dynamic Radio
Bearer Control
1..384, step 1 kbps
This parameter indicates the I/B
PS uplink rate upper limit when
Multi-RABs are conversational
(CS or PS) +
streaming/interactive/background
RNC
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,
144, 256, 384
kbps
This parameter indicates the I/B
PS downlink rate upper limit
when Multi-RABs are
conversational (CS or PS) +
streaming/interactive/background
RNC
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,
144, 256, 384
kbps
This parameter indicates the I/B
PS uplink rate upper limit when
Multi-RABs are conversational
(CS or PS) +
streaming/interactive/background
RNC
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,
144, 256, 384
kbps
This parameter indicates the I/B
PS downlink rate upper limit
when Multi-RABs are
conversational (CS or PS) +
streaming/interactive/background
RNC
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,
144, 256, 384
kbps
This parameter indicates
whether SRB beared on
transport channel E-DCH is
allowed or not. When minSF of E-
DCH is 2sf2+2sf4, this
RNC
Dynamic Radio
Bearer Control
/HSUPA
Introduction
0: Off
1: On
N/A
This parameter indicates
whether channel transferring for
C (VoIP/ CS voice) service
based on event 1F is allowed. If
this switch is "On", switching
RNC CS over HSPA
0: Off
1: On
N/A
This parameter indicates the
initial rate of UL DCH admission.
RNC
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,
144, 256, 384
kbps
This parameter indicates the
initial rate of DL DCH admission.
RNC
Dynamic Radio
Bearer Control
8, 16, 32, 64, 128,
144, 256, 384
kbps
This parameter indicates
whether substitute 3.4 kbps
signalling by 6.8 kbps signalling
during RRC connection setup
when signalling is carried on
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter is used to control
PS service channel allocation for
concurrent CS+PS . If the
parameter is on, for CS service
first and then PS service
RNC and
PLMN
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter is used to control
online-already service
reconfiguration method for UE of
Release 6 and after Release 6
when multi-RAB. For the scene
RNC and
PLMN
Dynamic Radio
Bearer Control
0: RB Setup
Method
1: RB
Reconfiguration
Method
N/A
This parameter is a switch which
indicates whether the dynamic
radio bearer control algorithm
based on DPI is supported .
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates the
switch of DPI based QoS
algorithm.
RNC and
PLMN
Deep Packet
Inspection
0: Off
1: On
N/A
This parameter indicates
whether to release Qchat UE's
non-Qchat-RB2 PS service when
non-Qchat-RB2 PS service is no
traffic volume .
RNC and
PLMN
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates the
event 4B0 counter threshold for
the release of Qchat UE's non-
Qchat-RB2 PS service for , when
RNC and
PLMN
Dynamic Radio
Bearer Control
1..65535 N/A
This parameter indicates
whether provide the NACC
(Network Assisted Cell
Change)function.0 indicates not
support, 1 indicates support.
RNC and
PLMN
Handover Control
0: Not Supported
1: Supported
N/A
This parameter indicates
whether provide PS handover to
Inter-RAT system.0 indicates not
support, 1 indicates support
RNC Handover Control
0: Not Supported
1: Supported
N/A
This parameter indicates
whether provide DTM mode, that
is whether provide inter-RAT
handover both for CS domain
services and PS domain services
RNC Handover Control
0: Not Supported
1: Supported
N/A
This parameter indicates if RNC
supports WB-AMR Speech
RNC
AMR-NB & AMR-
WB
0: Not Supported
1: Supported
N/A
This parameter indicates if RNC
supports PS Conversational RAB
for VoIP
RNC VOIP Bearers
0: Not Supported
1: Supported
N/A
This parameter indicates if RNC
supports PS Signalling RAB for
IMS
RNC VOIP Bearers
0: Not Supported
1: Supported
N/A
This parameter indicates if RNC
supports Service-Based
Handover
RNC Handover Control
0: Not Supported
1: Supported
N/A
This parameter indicates
whether HSDPA HS-DPCCH
ACK/NACK enhancement is
supported by RNC. For R6
version and beyond, HARQ
RNC HSDPA Introduction
0: Not Supported
1: Supported
N/A
This parameter indicates if RNC
supports neighbouring cell
monitoring.When this parameter
is 1, rnc will start neighbouring
cell monitoring
RNC
RAN Performance
Monitor / Handover
control FD
0: Not Supported
1: Supported
N/A
This parameter indicates
whether 2SF2+S2SF4 can be
used by UE. 1 indicates can use
2SF2+S2SF4, otherwise can not.
RNC and
PLMN
Dynamic Radio
Bearer Control
0: Not Supported
1: Supported
N/A
This parameter is used to
indicate if the CID LCS method
support.
RNC and
PLMN
Location Service
0: Not Supported
1: Supported
N/A
This parameter is used to
indicate if the AGPS LCS method
support.
RNC and
PLMN
Location Service
0: Not Supported
1: Supported
N/A
This parameter indicates if
support IMSI based handover.
RNC Handover Control
0: Not Supported
1: Supported
N/A
This parameter indicates if
MBMS PTP Service can be
Beared on HSDPA..
RNC and
PLMN
MBMS
0: Not Supported
1: Supported
N/A
This parameter indicates if
consider the target cell load
Information during the inter
system handover procedure..
RNC Handover Control
0: Not Supported
1: Supported
N/A
This parameter indicates if RNC
supports fast reconfiguration
function.
RNC and
PLMN
Node B
Management
0: Not Supported
1: Supported
N/A
This parameter indicates
whether AMR inter-frequency
handover allowed or not
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether AMR inter-Rat handover
allowed or not
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether R99 RT inter-frequency
handover allowed or not
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether R99 NRT inter-
frequency handover allowed or
not
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether R99 RT inter-Rat
handover allowed or not
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether R99 NRT inter-Rat
handover allowed or not
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether HSDPA inter-frequency
handover allowed or not
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether HSDPA inter-Rat
handover allowed or not
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether HSUPA inter-frequency
handover allowed or not
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether HSUPA inter-Rat
handover allowed or not
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether R99 RT inter-Rat
handover to EUTRAN allowed or
not.
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether R99 NRT inter-Rat
handover to EUTRAN allowed or
not.
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether HSDPA inter-Rat
handover to EUTRAN allowed or
not.
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether HSUPA inter-Rat
handover to EUTRAN allowed or
not.
RNC Handover Control
0: Off
1: On
N/A
This parameter indicates
whether PO2 can be dynamically
updated or not. PO2 is the power
offset between the DL DPCH
TPC domain and the DPCH data
RNC and
PLMN
Power Control
0: Off (Not Need
Dynamic Update)
1: On (Need
Dynamic Update)
N/A
This parameter is CS 64k RB
mode control switch.
RNC
Services and Radio
Access Bearers FD
0: Not Support
SCUDIF
1: Support
SCUDIF, CS64
Service
N/A
The parameter is the switch of
dedicated priority.
RNC Load Balance
0: Off
1: On
N/A
Specifies the NAS call number
acquisition switch in the CDT
function.
RNC and
PLMN
Call Detail Trace
0: Off
1: On
N/A
Specifies the NodeB statistic info
acquisition switch in the CDT
function.
RNC and
PLMN
Call Detail Trace
0: Off
1: On
N/A
Specifies the last Iu/Uu signalling
acquisition switch in the CDT
function.
RNC and
PLMN
Call Detail Trace
0: Off
1: On
N/A
When handover from UMTS to E-
UTRAN is failed, the timer, which
is specific to UE, is initialization,
and RNC will not handle E-
UTRAN inter-Rat measurement
RNC Handover Control 0..65535, step 1 s
This parameter indicates
whether to punish the UE that
can't camp on PCH state
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates
whether to transfer from
HSDSCH to DCH for R5 UE's
"PS Setup before CS"
Concurrent Service when
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
CDT Record Number Threshold
Per RRC Connection
RNC and
PLMN
Call Detail Trace 1..255 N/A
This parameter indicates the
switch of HS-DSCH/E-DCH or
HS-DSCH/ DCH to DCH/DCH,
used for CS+PS Scene. For
CS+PS Scene, If this parameter
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates the
event 4B0 counter threshold for
HS-DSCH to DCH, used for
CS+PS scene. For the CS+PS
scene.
RNC
Dynamic Radio
Bearer Control
1..255 N/A
This parameter indicates the
DCH rate of PS reconfigured,
used for CS+PS scene.
RNC
Dynamic Radio
Bearer Control
0, 8, 16, 32, 64,
128, 144, 256, 384
kbps
This parameter indicates the
switch of the PS service channel
allocation, used for UE in the
CELL_FACH state triggering CS
Call.If the parameter is on, when
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates that
after switching from HS-
DSCH/DCH or HS-DSCH/E-DCH
to DCH/DCH triggered by traffic
volume, whether the switching
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
Logical Iur Link Configuration
Object ID
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
0..2147483647 N/A
This parameter indicates
reference to UIurLink object.
RNC QoS Guarantee N/A N/A
Basic Priority Transport Bearer
Type Index RNC QoS Guarantee N/A N/A
Transport layer Qos Profile
parameter mapping Index for
each Iur adjacent NE.
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
N/A N/A
QOS Function Object ID RNC
Basic Identification
Parameter
0..2147483647 N/A
Qos Basic Configuration Object
ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
Basic Priority used for Basic
Priority indentification of
parameter related to Basic
Priority, can not adjustable
RNC QoS Guarantee
0..DBS_RR_MAX_
BP-1
N/A
This parameter indicates the
power offset between the DPCH
maximum downlink power for the
traffic class of different basic
priority. So that users of different
RNC HSUPA Introduction -50..0, step 0.1 dB
This parameter indicates the
power offset between the DPCH
maximum uplink power for the
traffic class of different basic
priority. So that users of different
RNC HSUPA Introduction -83..0, step 1 dB
This parameter indicates the
equivalent HSPA users.
Where MAX_BP is the maximum
number of the Basic Priority,
which equals to 16.
UTRAN Cell Load Balance 0.1..10, step 0.1 N/A
This parameter indicates the
nominal bit rate for uplink
interactive/background services
on DCH. It is mapped from the
Basic Priority , higher basic
RNC
QoS
Guarantee/Congesti
on Control/ HSUPA
Introduction
0..384, step 1 kbps
This parameter indicates the
nominal bit rate for downlink
interactive/background services
on DCH. It is mapped from the
Basic Priority, higher basic
RNC QoS 0..384, step 1 kbps
This parameter indicates the
nominal bit rate for
interactive/background services
on HS-DSCH. It is mapped from
the Basic Priority, higher basic
RNC HSUPA Introduction 0..65535, step 1 kbps
This parameter indicates the
nominal bit rate for
interactive/background services
on E-DCH. It is mapped from the
Basic Priority, higher basic
RNC HSUPA Introduction 0..65535, step 1 kbps
Basic Priority Mapping
Relationship Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
priority level of
Allocation/Retention Priority
(ARP).
RNC QoS Guarantee 1..15 N/A
This parameter indicates the
traffic class
RNC and
PLMN
QoS Guarantee
0: Voice
1: Video
2: Streaming
3: Background
4: corresponding
N/A
This parameter indicates the
Basic Priority (BP) which is a
kind of service priority mapping
from RAB parameters such as
ARP, traffic class and THP. It is
RNC and
PLMN
QoS Guarantee
/overbooking on iux
0..15 N/A
Scheduling Priority Mapping
Relationship Profile Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
Scheduling Priority configuration
index. There are several different
sets of configuration of the
Scheduling Priority configured in
UTRAN Cell
and PLMN
QoS Guarantee 0..255 N/A
Scheduling Priority Mapping
Relationship Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
Basic Priority (BP) which is a
kind of service priority mapping
from RAB parameters such as
ARP, traffic class and THP. It is
UTRAN Cell
and PLMN
QoS Guarantee 0..15 N/A
This parameter indicates the
radio bearer type.
UTRAN Cell
and PLMN
QoS Guarantee
0: DCH
1: HSPA
2: MBMS
N/A
This parameter indicates the
Scheduling Priority (SP) mapped
from Basic priority (BP) and
bearer type. It is used in
scheduling the real queue and
UTRAN Cell
and PLMN
QoS Guarantee 0..15 N/A
Application Priority Mapping
Relationship Profile Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
Application Priority configuration
index. There are several different
sets of configuration of the
Application Priority configured in
UTRAN Cell
and PLMN
QoS Guarantee 0..255 N/A
The parameter is used to identify
the Scene of the application
priority. the value of "0" is to
identify that the application
priority are used for load control
RNC QoS Feature Guide
0: Application
Priority
Configuration for
Load Control
1: Application
N/A
Application Priority Mapping
Relationship Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
Basic Priority. It is used in the
mapping of the Application
Priority.
UTRAN Cell QoS Guarantee 0..15 N/A
This parameter indicates the
radio bearer type.
UTRAN Cell
and PLMN
QoS Guarantee
0: DCH
1: HSPA
2: MBMS
N/A
This parameter indicates the
service direction used in
application priority mapping. The
uplink application priority is
mapped from uplink rate, and
UTRAN Cell
and PLMN
QoS Guarantee
0: Uplink
1: Downlink
N/A
This parameter indicates the rate
class which is used to map basic
priority of service.
UTRAN Cell QoS Guarantee
0: <=16Kbps
1: (16, 64]Kbps
2: (64, 128]Kbps
3: (128, 384]Kbps
4: >384Kbps
kbps
This parameter indicates the
Application Priority (AP) which is
mapped from Basic Priority,
bearer type and rate segment. It
is used in load control. It makes
UTRAN Cell
and PLMN
QoS Guarantee 0..15 N/A
This parameter indicates
transport Bearer Type Profile
Related to Basic Priority Object
ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
Basic Priority Transport Bearer
Type Index RNC
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
1..255 N/A
This parameter indicates
transmission Mode
RNC
Basic Identification
Parameter
0, 1 N/A
This parameter indicates
Transport Bearer Type Related
to Basic Priority Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
Basic Priority (BP) which is a
kind of service priority mapping
from RAB parameters such as
ARP, traffic class and THP. It is
RNC
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
0..15 N/A
Radio Bearer Type. Now can set
as DCH, HSPA, MBMS
RNC
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
enum: 0: DCH
1: HSPA
2: MBMS
N/A
Transport Bearer Type. Can be
set as ATM and IP RNC
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
enum:
DBS_TBEARERT
YPE_ATM: ATM
DBS_TBEARERT
YPE_IP: IP
N/A
The DSCP value of dedicated
service when basic proiority QOS
MAP is used. Available when
Transport Bear Type is IP.
RNC DiffServ 0..63 N/A
Uplink Reserved Bandwidth for
DCH or HSPA I/B Traffic
RNC Transport CAC 0..65535, Step 1 kbps
Downlink Reserved Bandwidth
for DCH or HSPA I/B Traffic
RNC Transport CAC 0..65535, Step 1 kbps
Dedicated Service Transport
Bearer Qos Profile Object ID
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
0..2147483647 N/A
Transport Qos Profile parameter
Index RNC
RAN Transmission
overview
1..32 N/A
Initial Transport Network Scene RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
0~5
N/A
Dedicated Service Transport
Bearer Qos Configuration Object
ID
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
0..2147483647 N/A
Traffic Category.Please Refer to
the Value Range for detail
information.
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
0: CS R99 Signal
1: HSDPA Signal
2: HSUPA Signal
3: R99 AMR
4: HSDPA AMR
N/A
Transport Bearer Type for IUR
Interface RNC
DiffServ, Transport
CAC, AAL2 Quality
of Service
separation
Enum value:
SigDBS_TBEARE
RTYPE_ATM:
ATM (0)
DBS_TBEARERT
N/A
The 1st Priority Transport Bearer
Type for IUB Interface
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
0: Invalid
21: IP Domain 1
22: IP Domain 2
23: IP Domain 3
10: ATM RT Type
N/A
The 2nd Priority Transport
Bearer Type for IUB Interface
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
0: Invalid
21: IP Domain 1
22: IP Domain 2
23: IP Domain 3
10: ATM RT Type
N/A
The 3st Priority Transport Bearer
Type for IUB Interface
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
0: Invalid
21: IP Domain 1
22: IP Domain 2
23: IP Domain 3
10: ATM RT Type
N/A
The 4th Priority Transport Bearer
Type for IUB Interface
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
0: Invalid
21: IP Domain 1
22: IP Domain 2
23: IP Domain 3
10: ATM RT Type
N/A
The 5th Priority Transport Bearer
Type for IUB Interface
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
0: Invalid
21: IP Domain 1
22: IP Domain 2
23: IP Domain 3
10: ATM RT Type
N/A
The 6th Priority Transport Bearer
Type for IUB Interface
RNC
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
0: Invalid
21: IP Domain 1
22: IP Domain 2
23: IP Domain 3
10: ATM RT Type
N/A
The DSCP value of dedicated
service
RNC DiffServ, 0..63 N/A
Uplink Reserved Bandwidth for
I/B Traffic RNC Transport CAC, 0..65535, Step: 1 kbps
Downlink Reserved Bandwidth
for I/B Traffic RNC Transport CAC, 0..65535, Step: 1 kbps
Access Control Profile Related to
Basic Priority Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
index of the configuration of the
set of the admission control
parameters based on the Basic
Priority. Different requirements
UTRAN Cell ,
PLMN, and
Basic Priority
Related
Admission Control 0..255 N/A
This parameter indicates the
Initial Load Scene used for CAC
threshold parameters
RNC
Basic Identification
Parameter
0: Normal Load
Cell
1: High Load Cell
N/A
Access Control Related to Basic
Priority Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
Basic Priority used in admission
control algorithm. Its value range
is 0~16, where 0~15 is the real
value range for the Basic Priority
UTRAN Cell
and Basic
Priority
Related
Admission Control 0..16 N/A
This parameter indicates the
uplink RTWP threshold for DCH
admission control. If the uplink
interference exceeds this
admission control threshold, the
UTRAN Cell ,
PLMN, and
Basic Priority
Related
Admission Control 0..62, step 0.1 dB
This parameter indicates the
downlink TCP threshold for DCH
admission. If the downlink power
exceeds this admission control
threshold, the new service
UTRAN Cell ,
PLMN, and
Basic Priority
Related
Admission Control 1..100, step 1 %
This parameter indicates the
uplink RTWP threshold for E-
DCH admission. If the uplink
interference exceeds this
admission control threshold, the
UTRAN Cell ,
PLMN, and
Basic Priority
Related
Admission Control 0..62, step 0.1 dB
This parameter indicates the
downlink TCP threshold for HS-
DSCH admission. If the downlink
power exceeds this admission
control threshold, the new
UTRAN Cell ,
PLMN, and
Basic Priority
Related
Admission Control 1..100, step 1 %
This parameter indicates the
downlink TCP threshold for
MBMS admission. If the downlink
power exceeds this admission
control threshold, the new MBMS
UTRAN Cell ,
PLMN, and
Basic Priority
Related
MBMS 1..100, step 1 %
This parameter indicates the
MBMS load threshold for
counting/recounting. If cell load
is greater than the threshold
indicated by this parameter,
UTRAN Cell ,
PLMN, and
Basic Priority
Related
MBMS 1..100, step 1 %
This parameter indicates the
code tree reserved ratio, which is
used in the admission control
algorithm based on code tree
reserved ratio, in order to
UTRAN Cell ,
PLMN, and
Basic Priority
Related
Admission Control 0..100, Step 1 %
User Authorized PLMN+SNAC
Information Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates number
of IMSI digit
RNC Handover Control 1..15 N/A
This parameter indicates digit of
IMSI
RNC Handover Control 0..9 N/A
This parameter indicates the
number of SNAC
RNC Handover Control 0..10 N/A
The parameter indicates MCC of
network that is shared by UEs
having same MCC+MNC+
Extend Information Digits Num+
Extend Information.
RNC Handover Control 0..999 N/A
The parameter indicates MNC of
network that is shared by UEs
having same MCC+MNC+
Extend Information Digits Num+
Extend Information.
RNC Handover Control 0..999 N/A
The parameter indicates shared
network area code of network
that is shared by UEs having
same MCC+MNC+ Extend
Information Digits Num+ Extend
RNC Handover Control 0..65535 N/A
White IMSI List Object ID RNC
Basic Identification
Parameter
0..2147483647 N/A
The Index of IMSI in WhiteList,
used for parameter setting
indication in OMC-R only, no
other meaning
RNC
Basic Identification
Parameter
0..65535 N/A
This parameter indicates the
IMSI Digits Number in White List
for User Identification
RNC VIP QoS Guarantee 1..15 N/A
This parameter indicates the
IMSI High-bit Digits in white List
for User Identification
RNC VIP QoS Guarantee 0..9 N/A
This parameter indicates
whether the User is VIP
RNC VIP QoS Guarantee
0: No
1: Yes
N/A
This parameter indicates the
basic priority of UE in the white
list
RNC VIP QoS Guarantee 0..15 N/A
This parameter indicates the
HSPA Scheduling priority of UE
in the white list
RNC VIP QoS Guarantee 0..15 N/A
This parameter indicates the
Congestion Scheduling priority of
UE in the white list
RNC VIP QoS Guarantee 0..15 N/A
This parameter indicates the
application priority of UE in the
white list
RNC VIP QoS Guarantee 0..15 N/A
This parameter indicates the
timer length of relocation delay
for VIPs' CS service.
RNC Handover Control 0..65535, Step 1 100ms
This parameter indicates the
timer length of relocation delay
for VIPs' PS service.
RNC Handover Control 0..65535, Step 1 100ms
LAC and SNAC Information
Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
shared network area code that
the location area belongs to. One
LAC can belong to at most four
SNAC (shared network area
RNC Handover Control 0..65535 N/A
This parameter identifies
different location area. LAC
belongs to LAI (LAI = MCC +
MNC + LAC).
RNC Handover Control N/A N/A
UE Timers and Constants
Information Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
UE Timer. Waiting Time After UE
Sending RRC CONNECTION
SETUP REQUEST Message.
UE starts T300 after transmitting
the RRC CONNECTION
RNC
Connection
Management
0: 100
1: 200
2: 400
3: 600
4: 800
ms
Maximum number of
retransmissions of the RRC
CONNECTION REQUEST
message.
UE starts T300 after transmitting
RNC
Connection
Management
0..7 N/A
UE timer in idle mode. Waiting
Time for Receiving "In Sync"
from L1 in Idle Mode.
In Idle mode, for establishing
dedicated channel, UE shall
RNC
Connection
Management
1..15, Step: 1 s
maximum number of "in sync"
received from L1 in idle mode
before the timer T312Idle
expires.
RNC
Connection
Management
0: 1
1: 2
2: 4
3: 10
4: 20
s
UE timer. Waiting Time After UE
Sending CELL/URA UPDATE
Message.
UE starts T302 after transmitting
the CELL UPDATE/URA
RNC
Connection
Management
0: 100
1: 200
2: 400
3: 600
4: 800
ms
Maximum number of
retransmissions of the CELL
UPDATE / URA UPDATE
message.
UE starts T302 after transmitting
RNC
Connection
Management
0..7 N/A
UE timer. Waiting Time After UE
Sending UE CAPABILITY
INFORMATION Message.
UE starts T304 after transmitting
the UE CAPABILITY
RNC
Connection
Management
0: 100
1: 200
2: 400
3: 1000
4: 2000
ms
Maximum number of
retransmissions of the UE
CAPABILITY INFORMATION
message.
UE starts T304 after transmitting
RNC
Connection
Management
0..7 N/A
UE timer. Period of Cell/URA
Update When UE is in
CELL_FACH/CELL_PCH/URA_
PCH State.
If T305 expires and UE detects
RNC
Connection
Management
0: No Update
1: 5
2: 10
3: 30
4: 60
min
UE timer. waiting time for
reentering service area after UE
is out of service.
If T305 expires and UE detects
"out of service area", UE shall
RNC
Connection
Management
0: 5
1: 10
2: 15
3: 20
4: 30
s
UE timer. Waiting Time After
Sending RRC CONNECTION
RELEASE COMPLETE Message
in CELL_DCH State.
UE starts T308 after transmitting
RNC
Connection
Management
0: 40
1: 80
2: 160
3: 320
ms
UE timer. Waiting Time After
Requesting Connection
Establishment in Other System
(eg. GSM).
RNC
Connection
Management
1..8, Step: 1 s
UE timer in connected mode.
Waiting Time for Receiving "In
Sync" from L1 in connected
mode.
In connected mode, for
RNC
Connection
Management
1..15, Step: 1 s
maximum number of "in sync"
received from L1 in connected
mode before the timer
T312Connected expires.
RNC
Connection
Management
0: 1
1: 2
2: 4
3: 10
4: 20
N/A
UE timer. Waiting Time After
DPCCH Established in
CELL_DCH State Losing
Synchronization.
In CELL_DCH state, after
RNC
Connection
Management
0..15, Step: 1 s
Maximum number of successive
"out of sync" received from L1.
In CELL_DCH state, after
receiving N313 consecutive "out
of sync" indications from layer 1,
RNC
Connection
Management
0: 1
1: 2
2: 4
3: 10
4: 20
N/A
UE timer. Waiting Time for
Completion of Cell Update When
Radio Link Fails and Radio
Bearer (s) Associated with T314
Exist.
RNC
Connection
Management
0: 0
1: 2
2: 4
3: 6
4: 8
s
UE timer. Waiting Time for
Completion of Cell Update When
Radio Link Fails and Radio
Bearer (s) Associated with T315
Exist.
RNC
Connection
Management
0: 0
1: 10
2: 30
3: 60
4: 180
s
Maximum number of successive
"in sync" received from L1 during
T313 is activated.
In CELL_DCH state, after
receiving N313 consecutive "out
RNC
Connection
Management
0: 1
1: 2
2: 4
3: 10
4: 20
N/A
UE timer. Waiting Time for Cell
Selection/Reselection After UE is
out of Service in
CELL_PCH/URA_PCH State.
RNC
Connection
Management
0: 0
1: 10
2: 20
3: 30
4: 40
s
This parameter indicates
whether the fast Dormancy is
active. When fast dormancy
switch is "On" , RNC send T323
to UE by SIB1 and UTRAN
RNC
Connection
Management
0: Off
1: On
N/A
This parameter indicates the
interval of reporting signalling
connection release indication
(with cause). As UE in
connection mode in PS domain,
RNC
Connection
Management
0: 0
1: 5
2: 10
3: 20
4: 30
s
Cell Extended Info Configuration
Object ID, identifies an object
under its parent object uniquely.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
supported CN domain
RNC and
PLMN
Connection
Management
0: CS Domain
1: PS Domain
2: CS +PS Domain
N/A
This parameter indicates
whether attach and detach
procedures are required to be
used or not.
TRUE: When the UE is switched
RNC and
PLMN
Connection
Management / Idle
Mode and Common
Channel Behavior
0: Not Apply IMSI
Attach and Detach
Procedure
1: Apply IMSI
Attach and Detach
N/A
The network operation mode is
used to indicate whether the Gs
interface is installed or not.
Network Mode of Operation I
indicates that Gs interface
RNC and
PLMN
Connection
Management
0: Network Mode
of Operation I
1: Network Mode
of Operation II
N/A
The T3212 is the timeout value
for periodic location area
updating in deciphers.
The location update occurs in the
system due to two reasons: UE
RNC and
PLMN
Connection
Management
0, 0.1..25.5, step
0.1
hours
This parameter indicates the CS
domain DRX cycle length
coefficient.
This parameter is used for the
difficult reception of UE in the
RNC and
PLMN
Connection
Management
6..9 N/A
This parameter indicates the PS
domain DRX cycle length
coefficient.
This parameter is used for the
difficult reception of UE in the
RNC and
PLMN
Connection
Management
6..9 N/A
This parameter indicates the
modification period coefficient for
MBMS. MBMS modification
period equals 2^k*10ms, where k
is the modification period
RNC
MBMS /Connection
Management
7..10 N/A
Cell Extended Info Configuration
Object ID, identifies an object
under its parent object uniquely.
RNC
Basic Identification
Parameter
0..2147483647 N/A
Specifies the maximum time for
Relocation Preparation
procedure in the source RNC.
When the source RNC sends the
RELOCATION REQUIRED
RNC Handover Control 1..300, Step 1 100ms
Specifies the maximum time for
the protection of overall
Relocation procedure in the
source RNC.
Upon reception of the
RNC Handover Control 1..300, Step 1 100ms
This parameter indicates
Maximum Time for RAB Queuing
in RNC, RNC will return RAB
failure if the timer expire
RNC and
PLMN
parameter for future
use
1..300, Step 1 100ms
Specifies the time to start
sending the forwarded PDCP
SDUs in the target RNC during
relocation of SRNS.
During the relocation of SRNS,
RNC Handover Control 1..300, Step 1 ms
Specifies the maximum time for
Reset procedure in the RNC.
If the RNC sends a RESET
message to the CN and receives
no RESET ACKNOWLEDGE
RNC
connection
management
1..120, Step 1 s
Specifies a guard period in the
RNC before sending a RESET
ACKNOWLEDGE message.
After a guard period of TRatC
seconds a RESET
RNC
connection
management
5..60, Step 1 s
Specifies a guard period in the
RNC before sending a RESET
RESOURCE ACKNOWLEDGE
message.
After a guard period of
RNC
connection
management
50..600, Step 1 100ms
Specifies the maximum time for
Reset Resource procedure in the
RNC.
If the RNC sends a RESET
RESOURCE message to the CN
RNC N/A 0..1200, Step 1 100ms
Specifies the timer for Ignoring
OVERLOAD.
While this timer is running, all
OVERLOAD messages or
signalling point congested
RNC Iu Flex 0..255, step 5 s
Specifies the timer for not
allowing to increase traffic.
While this timer is running, the
RNC is not allowed to increase
traffic.
RNC Iu Flex 0..300, step 10 s
Specifies the maximum number
of RESET RESOURCE re-
transmit.
If the RNC sends a RESET
RESOURCE message to the CN
RNC N/A 1..5 N/A
Specifies the maximum number
of RESET re-transmit.
If the RNC sends a RESET
message to the CN and receives
no RESET ACKNOWLEDGE
RNC IU RESET 1..5 N/A
Dynamic Radio Bearer Control
Information Profile Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
DRBC strategy configuration
index.
RNC
Dynamic Radio
Bearer Control
0..255 N/A
This parameter indicates the
DRBC strategy name.
RNC
Dynamic Radio
Bearer Control
N/A N/A
Dynamic Radio Bearer Control
Information Profile Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
event 4B counter threshold for
HSPA using DTX/DRX or
CELL_FACH using DRX to PCH
or IDLE shared by uplink and
RNC
Dynamic Radio
Bearer Control
1..65535, step 1 N/A
This parameter indicates the
event 4A counter threshold for
CELL_FACH->CELL_DCH. For
the UE in CELL_FACH state, if
the times of the measured RLC
RNC
Dynamic Radio
Bearer Control
1..65535, step 1 N/A
This parameter indicates the
event 4A counter threshold for
increasing rate on DCH or DCH-
>HSPA. For the UE using DCH
in both directions, if the times of
RNC
Dynamic Radio
Bearer Control
1..255, step 1 N/A
This parameter indicates the
event 4B counter threshold for
decreasing rate on DCH. For the
UE using DCH in both directions,
if the times of the measured RLC
RNC
Dynamic Radio
Bearer Control
1..255, step 1 N/A
This parameter indicates the
event 4B counter threshold for
CELL_DCH to PCH shared by
uplink and downlink. For the UE
in CELL_DCH state, if the times
RNC
Dynamic Radio
Bearer Control
1..65535, step 1 N/A
This parameter indicates the
event 4B counter threshold for
CELL_FACH without Enhanced
UE DRX to PCH shared by
uplink and downlink. For the UE
RNC
Dynamic Radio
Bearer Control
1..65535, step 1 N/A
This parameter indicates the
event 4B counter threshold for
CELL_DCH to idle state shared
by uplink and downlink when
PCH is not supported by UE or
RNC
Dynamic Radio
Bearer Control
1..65535, step 1 N/A
This parameter indicates the
event 4B counter threshold for
CELL_FACH without Enhanced
UE DRX to idle state shared by
uplink and downlink when PCH is
RNC
Dynamic Radio
Bearer Control
1..65535, step 1 N/A
This parameter indicates the
time threshold of UE staying in
CELL_PCH or URA_PCH for the
judgment of transferring from
CELL_PCH or URA_PCH to idle.
RNC
Dynamic Radio
Bearer Control
1..65535, step 1 s
For the UE which is using
CELL_DCH, if the measurement
of the occupied of the uplink and
downlink sending buffers. This
parameter indicates the event 4B
RNC
Dynamic Radio
Bearer Control
1..65535, step 1 N/A
This parameter indicates the
event 4A counter threshold for
switching E-TTI from 10ms to
2ms. For the UE using E-DCH, if
the times of the measured user
RNC
Dynamic Radio
Bearer Control
1..255, step 1 N/A
This parameter indicates the
event 4B counter threshold for
switching E-TTI from 2ms to
10ms. For the UE using E-DCH,
if the times of the measured user
RNC
Dynamic Radio
Bearer Control
1..255, step 1 N/A
This parameter indicates the
event A counter threshold of
consecutive DTCP reports. If the
times of dedicated transmitted
code power being larger than the
RNC
Dynamic Radio
Bearer Control
1..255, step 1 N/A
This parameter indicates the
event B counter threshold of
consecutive DTCP reports. If the
times of dedicated transmitted
code power being less than the
RNC
Dynamic Radio
Bearer Control
1..255, step 1 N/A
This parameter indicates
whether transferring from other
transport channel to FACH is
allowed or not.
RNC
Dynamic Radio
Bearer Control
0: Off
1: On
N/A
This parameter indicates
whether transferring to
URA_PCH/CELL_PCH is
supported or not. If the value is
'Only Support URA_PCH', allows
RNC
Dynamic Radio
Bearer Control
0: Not Support
1: Only Support
URA_PCH
2: Only Support
CELL_PCH
N/A
This parameter indicates the
increment times of event 4B0 for
UE which is not sensitive for
battery consumption is
transferred to
RNC
Dynamic Radio
Bearer Control
0..65535 N/A
This parameter indicates the
event 4B counter threshold for
CELL_DCH to CELL_FACH for
the UE which is using Dtx/Drx.
For the UE using Dtx/Drx, if the
RNC
parameter for future
use
1..65535 N/A
Global Access Control
Information Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
maximum number of the
congested calls in the true
queue.
RNC Congestion Control 0..32 N/A
This parameter indicates the
maximum time length that the
call can stay in the true queue,
after the call setup requirement
is refused by the Call Admission
RNC Congestion Control 1..60, Step 1 s
This parameter indicates the
maximum time length that the
service, which relocates into
UTRAN, can stay in the true
queue after the relocation
RNC Congestion Control 0..60, Step 1 s
This parameter indicates the
maximum time in the true queue
when service be forced into
queue. In the condition that there
is no queue information or the
RNC Congestion Control 1..60, Step 1 s
This parameter indicates when
AMR traffic is being admitted, if
MaxBR is adopted but fails to be
admitted due to soft resource
limit and the switch is on, the
RNC
Admission Control
/AMR-NB & AMR-
WB
0: Off
1: On
N/A
This parameter indicates the
forced queue switch for AMR
service. In the condition that
there is no queue information or
the RAB be assigned has no
RNC Congestion Control
0: Off
1: On
N/A
This parameter indicates the
forced queue switch for CS 64
kbps service. In the condition
that there is no queue
information or the RAB be
RNC Congestion Control
0: Off
1: On
N/A
This parameter is the HSPA
configuration object ID.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates
whether the RNC supports the F-
DPCH or not.
RNC HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates
whether the RNC supports the
Enhanced F-DPCH or not.
RNC HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates
whether RNC supports to
activate downlink 64QAM and
MIMO at the same time
RNC HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates
whether the function to re-assign
the downlink DPCH
channelization code in HSDPA
cell is supported or not.
RNC
Code Resource
Allocation
0: Not Supported
1: Supported
N/A
This parameter indicates the
period to judge whether to re-
assign the channelization codes
of one or several downlink
DPCH.
RNC
Code Resource
Allocation
5..65535, step 5 s
This parameter is the DTX/DRX
switch indicating whether
DTX/DRX is allowed to be used.
When the value of the switch is
"On", DTX/DRX is allowed to be
RNC HSPA Evolution
0: Off
1: On
N/A
This parameter is the DTX switch
for real time speech services
indicating whether DTX is
allowed to be used. When the
value of the switch is "On", the
RNC HSPA Evolution
0: Off
1: On
N/A
This parameter is the DTX switch
for non-realtime services
indicating whether DTX is
allowed to be used. When the
value of the switch is "On", the
RNC HSPA Evolution
0: Off
1: On
N/A
This parameter is the DRX
switch for real time speech
services indicating whether DRX
is allowed to be used. When the
value of the switch is "On", the
RNC HSPA Evolution
0: Off
1: On
N/A
This parameter is the DRX
switch for non-realtime services
indicating whether DRX is
allowed to be used. When the
value of the switch is "On", the
RNC HSPA Evolution
0: Off
1: On
N/A
This parameter is a switch which
indicates whether HS-SCCH
Less is allowed to be used by the
RNC
RNC HSPA Evolution
0: Off
1: On
N/A
This parameter is HS-SCCH
Less switch for non-VoIP/AMR
services. When the value of the
switch is "On", other services
except VoIP/AMR are allowed to
RNC HSPA Evolution
0: Off
1: On
N/A
This parameter indicates
whether the RNC supports the
Downlink Enhanced Layer 2
function or not.
RNC HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates
whether the RNC supports the
Uplink Enhanced Layer 2
function or not.
RNC HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates
whether the RNC supports the
64QAM function or not.
RNC HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates
whether the RNC supports the
MIMO function or not.
RNC HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter is a switch
indicating whether it is supported
or not for Limiting HSDPA GBR
Resource Consumption when
HSDPA GBR users in bad radio
RNC Overload Control
0: Off
1: On
N/A
This parameter indicates the
support type of RLC flexible PDU
size format for signalling and
service.
RNC
HSPA Evolution
/HSDPA Packet
Scheduling
1: Signalling Fixed
Mode, Service
Flexible Mode
2: Signalling and
Conversational
N/A
This parameter indicates the
support type of RLC flexible PDU
size format for uplink signalling
and service.
RNC HSPA Evolution
1: Signalling Fixed
Mode, Service
Flexible Mode
2: Signalling and
Conversational
N/A
This parameter indicates
whether RNC supports to
activate Dual Cell and MIMO at
the same time.
RNC HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter describes
whether Dual-Cell HS-DSCH is
supported.
RNC HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates the
power offset relative to 2ms TTI
E-HICH in single link condition
for 2ms TTI E-HICH of serving E-
DCH RLS in macro diversity
RNC Power Control
-63.75..63.75, step
0.25
Db
This parameter indicates the
power offset relative to 10ms TTI
E-HICH in single link condition
for 10ms E-TTI E-HICH of
serving E-DCH RLS in macro
RNC Power Control
-63.75..63.75, step
0.25
Db
This parameter indicates the
power offset relative to 2ms TTI
E-HICH in single link condition
for 2ms TTI E-HICH of non-
serving E-DCH RLS in macro
RNC Power Control
-63.75..63.75, step
0.25
Db
This parameter indicates the
power offset relative to 10ms TTI
E-HICH in single link condition
for 10ms E-TTI E-HICH of non-
serving E-DCH RLS in macro
RNC Power Control
-63.75..63.75, step
0.25
Db
This parameter indicates the
power offset relative to 2ms TTI
E-RGCH in single link condition
for 2ms TTI E-RGCH of serving
E-DCH RLS in macro diversity
RNC Power Control
-63.75..63.75, step
0.25
Db
This parameter indicates the
power offset relative to 10ms TTI
E-RGCH in single link condition
for 10ms E-TTI E-RGCH of
serving E-DCH RLS in macro
RNC Power Control
-63.75..63.75, step
0.25
Db
This parameter indicates the
power offset relative to 10ms TTI
E-RGCH in single link condition
for E-RGCH of non-serving E-
DCH RLS in macro diversity
RNC Power Control
-63.75..63.75, step
0.25
Db
This parameter indicates
whether dynamic updating of E-
AGCH power offset is needed or
not.
RNC Power Control
0: Off (Not Need
Dynamic
Adjustment)
1: On (Need
Dynamic
N/A
This parameter indicates the
period to judge whether to adjust
the HSUPA control channel
number.
RNC
Code Resource
Allocation
6..65532, step 6 s
This parameter indicates
whether to judge event 1F
condition when the service is
setup on HSPA.
RNC
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates the
quantified E-DPCCH/DPCCH
power offset configured to 10ms
E-DCH transmission time
interval.
RNC Power Control 0..8 N/A
This parameter indicates the
quantified E-DPCCH/DPCCH
power offset configured to 2ms E-
DCH transmission time interval.
RNC Power Control 0..8 N/A
This parameter indicates the
power offset for scheduling
information configured to 2ms E-
TTI. When no MACd PDUs are
included in the same MACe
RNC Power Control 0..6 N/A
This parameter indicates the
power offset for scheduling
information configured to 10ms E-
TTI. When no MACd PDUs are
included in the same MACe
RNC Power Control 0..6 N/A
This parameter indicates the
power offset of HS-DPCCH ACK
domain relative to DPCCH when
UE has a single link or is in the
intra-NodeB handover.
RNC Power Control 0..8 N/A
This parameter indicates the
ACK-NACK repetition factor,
indicating the number of
consecutive repetitions of the
ACK and NACK.
RNC Power Control 1..4 N/A
This parameter indicates the
power offset of HS-DPCCH
NACK domain relative to
DPCCH when UE has a single
link or is in the intra- NodeB
RNC Power Control 0..8 N/A
This parameter indicates the CQI
feedback cycle, to determine the
time to send CQI. When the
value is 0, the UE does not feed
back the channel quality.
RNC Power Control
0: 0
1: 2
2: 4
3: 8
4: 10
ms
This parameter indicates the
power offset of HS-DPCCH CQI
domain relative to DPCCH when
UE has a single link or is in the
intra-NodeB handover.
RNC Power Control 0..8 N/A
This parameter indicates the CQI
repetition factor, indicating the
number of consecutive
repetitions of the CQI.
This parameter is a triple array,
RNC Power Control 1..4 N/A
This parameter indicates the E-
DCH reference power offset,
which is used to estimate the E-
DPDCH power from E-TFCI
without decoding MAC-e PDUs
RNC Power Control 0..6 N/A
This parameter indicates the
target for TPC command error
rate, used for adjusting SIR
target of F-DPCH.
RNC Power Control
0.01..0.1, step
0.01
N/A
This parameter indicates the
HSDPA associate compressed
mode method. The value of
'Serial ' means that compressed
mode and HSDPA can not be
RNC Handover Control
0: Serial
1: Parallel
N/A
This parameter indicates the
HSUPA associate Compressed
Mode method. The value of
'Serial ' means that compressed
mode and HSUPA can not be
RNC Handover Control
0: Serial
1: Parallel
N/A
This parameter indicates the
power offset of HS-DPCCH ACK
domain relative to DPCCH when
UE is in inter-Node B handover.
RNC Power Control 0..8 N/A
This parameter indicates the
power offset of HS-DPCCH CQI
domain relative to DPCCH when
UE is in inter-NodeB handover.
RNC Power Control 0..8 N/A
This parameter indicates the
power offset of HS-DPCCH
NACK domain relative to
DPCCH when UE is in inter-
Node B handover.
RNC Power Control 0..8 N/A
For HSPA, this parameter
indicates the minimum interval
between two HSPA serving cell
changes or channel , which
helps to avoid too frequent HSPA
RNC Handover Control 0..65535, step 1 s
This parameter indicates the unit
of time period to judge whether
the code occupation ratio
satisfies the criteria to adjust the
HS-PDSCH number based on
RNC
Code Resource
Allocation
0: ms
1: s
N/A
This parameter indicates the
time period to judge whether the
code occupation ratio satisfies
the criteria to adjust the HS-
PDSCH number based on code
RNC
Code Resource
Allocation
100..60000, step
100
ms
This parameter indicates the
time period to judge whether the
code occupation ratio satisfies
the criteria to adjust the HS-
PDSCH number based on code
RNC
Code Resource
Allocation
1..65535, step 1 s
This parameter indicates the
allocation method for HS-
PDSCH and HS-SCCH Total
Power (when HSUPA is not
supported) or HS-PDSCH, HS-
RNC
Power
Control/Congestion
Control/HSDPA
Packet
Scheduling/Adimissi
1: RNC Dynamic
Assigning Mode
2: NodeB
Assigning Mode
N/A
This parameter indicates the
maximum bit rate of HS-DSCH
across Iur interface. This
parameter used by DRNC to
adjust code resource, on the
RNC
Dynamic Radio
Bearer Control
0..65535, Step 1 kbps
This parameter is the common
EDCH configuration object ID.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
quantified E-DPCCH/DPCCH
power offset configured to 10ms
Common E-DCH transmission
time interval.
RNC
Uplink Enhanced
CELL_FACH
0..8 N/A
This parameter indicates the
quantified E-DPCCH/DPCCH
power offset configured to 2ms
Common E-DCH transmission
time interval.
RNC
Uplink Enhanced
CELL_FACH
0..8 N/A
This parameter indicates the
power offset for scheduling
information configured to 2ms
TTI Common E-DCH. When no
MACd PDUs are included in the
RNC
Uplink Enhanced
CELL_FACH
0..6 N/A
This parameter indicates the
power offset for scheduling
information configured to 10ms
TTI Common E-DCH. When no
MACd PDUs are included in the
RNC
Uplink Enhanced
CELL_FACH
0..6 N/A
This parameter indicates the
power offset of HS-DPCCH ACK
domain relative to DPCCH for
common E-DCH transmission.
RNC
Uplink Enhanced
CELL_FACH
0..8 N/A
This parameter indicates the
ACK-NACK repetition factor for
common E-DCH transmission, it
indicates the number of
consecutive repetitions of the
RNC
Uplink Enhanced
CELL_FACH
1..4 N/A
This parameter indicates the
power offset of HS-DPCCH
NACK domain relative to
DPCCH for common E-DCH
transmission.
RNC
Uplink Enhanced
CELL_FACH
0..8 N/A
This parameter indicates the CQI
feedback cycle for common E-
DCH transmission, it is used to
determine the time to send CQI.
When the value is 0, the UE
RNC
Uplink Enhanced
CELL_FACH
0: 0
1: 2
2: 4
3: 8
4: 10
ms
This parameter indicates the
power offset of HS-DPCCH CQI
domain relative to DPCCH for
common E-DCH transmission.
RNC
Uplink Enhanced
CELL_FACH
0..8 N/A
This parameter indicates the CQI
repetition factor for common E-
DCH transmission, indicating the
number of consecutive
repetitions of the CQI.
RNC
Uplink Enhanced
CELL_FACH
1..4 N/A
This parameter indicates the
common E-DCH reference
power offset, which is used to
estimate the E-DPDCH power
from E-TFCI without decoding
RNC
Uplink Enhanced
CELL_FACH
0..6 N/A
This parameter indicates the F-
DPCH TPC command error rate
target for common E-DCH
transmission, it is used for
adjusting SIR target of F-DPCH.
RNC
Uplink Enhanced
CELL_FACH
0.01..0.1, step
0.01
N/A
This parameter indicates
whether the MAC-d flow carrying
DTCH and the MAC-d flow
carrying DCCH are allowed to be
multiplexed in the same MAC-i
RNC
Uplink Enhanced
CELL_FACH
0: Off
1: On
N/A
This parameter indicates the
common E-DCH transmission
time interval.
According to the specification
there are two kind of E-TTI,
RNC
Uplink Enhanced
CELL_FACH
0: 2
1: 10
ms
This parameter is the logical
channel type indicator for
common E-DCH MAC-d flow.
RNC
Uplink Enhanced
CELL_FACH
0: CCCH
1: DCCH
2: DTCH
N/A
This parameter indicates the
HARQ power offset for common
E-DCH MAC-d flow when 2ms E-
TTI is used.
RNC
Uplink Enhanced
CELL_FACH
0..6 N/A
This parameter indicates the
HARQ power offset for common
E-DCH MAC-d flow when 10ms
E-TTI is used.
RNC
Uplink Enhanced
CELL_FACH
0..6 N/A
This parameter indicates the
maximum number of
retransmissions for common E-
DCH MAC-d flow when 2ms E-
TTI is used.
RNC
Uplink Enhanced
CELL_FACH
0..15 N/A
This parameter indicates the
maximum number of
retransmissions for common E-
DCH MAC-d flow when 10ms E-
TTI is used.
RNC
Uplink Enhanced
CELL_FACH
0..15 N/A
This parameter indicates the
maximum size in octets of the
RLC PDU in the flexible RLC
PDU size mode used in common
E-DCH.
RNC
Uplink Enhanced
CELL_FACH
2..1505, Step 1 bytes
This parameter indicates the
minimum size in octets of the
RLC PDU in the flexible RLC
PDU size mode used in common
E-DCH.
RNC
Uplink Enhanced
CELL_FACH
2..1505, Step 1 bytes
This parameter indicates the
spreading factor supported by
Uplink enhanced CELL_FACH.
RNC
Uplink Enhanced
CELL_FACH
0: 2SF4
1: 2SF2
2: 2SF2+2SF4
N/A
This parameter is used for
deciding the delay of transmitting
'happy bit' by UE, which is
configured by RNC for UE in
uplink enhanced CELL_FACH
RNC HSPA Evolution
0: 2
1: 10
2: 20
3: 50
4: 100
ms
This parameter is the limiting
HSDPA GBR resource
consumption profile object ID.
UTRAN Cell
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the ID
of Limiting HSDPA GBR
Resource Consumption
parameters profile. Different
requirements need different
UTRAN Cell Overload Control 0..65535 N/A
This parameter is the limiting
HSDPA GBR resource
consumption configuration object
ID.
UTRAN Cell
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
guaranteed bit rate level number
of HSDPA services for limiting
HSDPA GBR resource
consumption. It is used in
UTRAN Cell Overload Control 1..33 N/A
This parameter indicates the
guaranteed bit rate levels of
HSDPA services for limiting
HSDPA GBR resource
consumption. It is used in
UTRAN Cell Overload Control
13600, 23850,
38800, 64000,
128000, 384000,
768000, 900000,
1200000,
bps
This parameter indicates UE HS-
DSCH required power upper limit
for limiting HSDPA GBR
resource consumption,
expressed in the form of power
UTRAN Cell Overload Control -35..15, step 0.1 dB
This parameter indicates MBMS
configuration object ID.
RNC
Basic Identification
Parameter
0..2147483647,
Step 1
N/A
This parameter indicates
whether streaming service is
carried by PTP.
RNC MBMS
0: Off
1: On
N/A
This parameter indicates
whether background service is
carried by PTP.
RNC MBMS
0: Off
1: On
N/A
This parameter indicates the
minimum rate threshold of the
SCCPCH setup for MBMS.
RNC MBMS
0: 64
1: 128
2: 256
3: 384
4: 16
kbps
This parameter indicates
whether MSCH is supported or
not
RNC MBMS
0: Off
1: On
N/A
This parameter is the streaming
traffic frequency converge switch
RNC MBMS
0: Off
1: On
N/A
This parameter is the
background traffic frequency
converge switch.
RNC MBMS
0: Off
1: On
N/A
This parameter indicates the
power of SCCPCH used to bear
MTCH information when
receiving in the soft combining
mode. This parameter is the
RNC MBMS -15..0, step 1 dB
This parameter indicates the
power of SCCPCH used to bear
MTCH information when
receiving in the selective
combining mode. This parameter
RNC MBMS -15..0, step 1 dB
This parameter indicates the
threshold to judge if the local cell
is in half-island status. When the
number of neighbouring cells
transmitting the same MBMS
RNC MBMS 0..15 N/A
This parameter indicates the
threshold to judge if the cell is in
island status. When the number
of neighbouring cells that
transmitting the same MBMS
RNC MBMS 0..15 N/A
This parameter indicates the
switch of dropping MBMS service
in MBMS overload controll.
RNC MBMS
0: Off
1: On
N/A
This parameter indicates
whether UEs in URA_PCH state
will be counted or not.
RNC MBMS
0: False
1: True
N/A
This parameter indicates
whether UEs in CELL_PCH state
will be counted or not.
RNC MBMS
0: False
1: True
N/A
This parameter indicates
whether UEs in CELL_FACH
state will be counted or not.
RNC MBMS
0: False
1: True
N/A
This parameter indicates the UE
number threshold used for
switching between PTP and
PTM. If number of UEs obtained
by counting is larger than or
RNC MBMS 1..64 N/A
T318 is a timer which starts after
transmission of RRC
CONNECTION REQUEST in
case of connection
establishment for MBMS
RNC MBMS
0: 250
1: 500
2: 750
3: 1000
4: 1250
ms
This parameter is a switch
indicating whether Iub transport
bearer multiplexing is used on
the Iub interface
RNC MBMS
0: Off
1: On
N/A
This parameter indicates the UE
DTX/DRX Profile Object ID.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter is UE DTX/DRX
configuration Index which
indicates a set of DTX/DRX
parameters. Each service
obtains the DTX/DRX
Service
Related
HSPA Evolution 1..50 N/A
This parameter indicates the UE
DTX/DRX Profile Object ID.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the UE
DTX cycle 1 for 2ms TTI. When
E-DCH TTI is 2ms and UL DTX
mode is active, if UE enters DTX
mode controlled by UL DTX
Service
Related
HSPA Evolution
0: 1
1: 4
2: 5
3: 8
4: 10
subframe
This parameter indicates the UE
DTX cycle 1 for 10ms TTI. When
E-DCH TTI is 10ms and UL DTX
mode is active, if UE enters DTX
mode controlled by UL DTX
Service
Related
HSPA Evolution
0: 1
1: 5
2: 10
3: 20
subframe
This parameter indicates the UE
DTX cycle 2 for 2ms TTI. When
E-DCH TTI is 2ms and UL DTX
mode is active, if UE enters DTX
mode controlled by UL DTX
Service
Related
HSPA Evolution
0: 4
1: 5
2: 8
3: 10
4: 16
subframe
This parameter indicates the UE
DTX cycle 2 for 10ms TTI. When
E-DCH TTI is 2ms and UL DTX
mode is active, if UE enters DTX
mode controlled by UL DTX
Service
Related
HSPA Evolution
0: 5
1: 10
2: 20
3: 40
4: 80
subframe
This parameter indicates the
MAC DTX cycle for 2ms TTI.
When UL DTX mode is active, if
no E-DCH transmission has
been performed for the last MAC
Service
Related
HSPA Evolution
0: 1
1: 4
2: 5
3: 8
4: 10
subframe
This parameter indicates the
MAC DTX cycle for 10ms TTI.
When UL DTX mode is active, if
no E-DCH transmission has
been performed for the last MAC
Service
Related
HSPA Evolution
0: 5
1: 10
2: 20
subframe
This parameter indicates the
inactivity threshold for UE DTX
cycle 2 for 2ms TTI. If there has
no any E-DCH transmission for
the number of E-DCH TTIs
Service
Related
HSPA Evolution /
HSUPA Packet
Scheduling
0: 1
1: 4
2: 8
3: 16
4: 32
TTI
This parameter indicates the
inactivity threshold for UE DTX
cycle 2 for 10ms TTI. If there has
no any E-DCH transmission for
the number of E-DCH TTIs
Service
Related
HSPA Evolution /
HSUPA Packet
Scheduling
0: 1
1: 4
2: 8
3: 16
4: 32
TTI
This parameter indicates the UE
DTX long preamble length.
When UE enters DTX status
controlled by UE DTX cycle 2, if
there is data to be transmitted on
Service
Related
HSPA Evolution
0: 2
1: 4
2: 15
slot
This parameter indicates the
MAC inactivity threshold. When
UL DTX mode is active, if no E-
DCH transmission has been
performed for the number of
Service
Related
HSPA Evolution
0: 1
1: 2
2: 4
3: 8
4: 16
TTI
This parameter indicates the CQI
DTX timer. When UE detects
consistent control information
intended for this UE and the
TFRI value does not correspond
Service
Related
HSPA Evolution
0: 0
1: 1
2: 2
3: 4
4: 8
subframe
When UE enters DTX mode
controlled by UE DTX cycle 1,
UE shall transmit DPCCH burst
in each DTX cycle 1. The length
of uplink DPCCH burst shall
Service
Related
HSPA Evolution /
HSUPA Packet
Scheduling
0: 1
1: 2
2: 5
subframe
When UE enters DTX mode
controlled by UE DTX cycle 2,
UE shall transmit DPCCH burst
in each DTX cycle 2. The length
of uplink DPCCH burst shall
Service
Related
HSPA Evolution /
HSUPA Packet
Scheduling
0: 1
1: 2
2: 5
subframe
After UE enters downlink DRX
mode, UE shall detect HS-SCCH
in each number of subframes
indicated by this parameter.
Service
Related
HSPA Evolution
0: 4
1: 5
2: 8
3: 10
4: 16
subframe
When UE does not detect
consistent control information
intended for this UE or the
received TFRI value does not
correspond to a HS-SCCH order
Service
Related
HSPA Evolution
0: 0
1: 1
2: 2
3: 4
4: 8
subframe
After E-DCH is scheduled, UE
shall monitor the full E-AGCH of
the E-DCH serving cell and E-
RGCH (s) of all cells in the E-
DCH active set for the number of
Service
Related
HSPA Evolution
0: 0
1: 1
2: 2
3: 4
4: 8
TTI
This parameter indicates
whether UE monitors the full E-
AGCH of the serving cell when
the start of the E-AGCH or E-
RGCH transmission overlaps
Service
Related
HSPA Evolution
0: False
1: True
N/A
This parameter is the power
control profile related to service
object ID.
UTRAN Cell
and Service
Related
Basic Identification
Parameter
0..2147483647 N/A
This parameter is the service
related power control parameters
profile ID. Each cell obtains the
service related power control
parameters according to this
UTRAN Cell
and Service
Related
Power Control 0..65535 N/A
This parameter indicates the
initial load scene for the
parameters in SrvPcProfile.
UTRAN Cell
Basic Identification
Parameter
0: Normal Load
Cell
1: High Load Cell
N/A
This parameter is the power
control related to service object
ID.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the sub
service type, used for numbering
for each sub service. 0...5 are
used for signalling service;
6...250 are used for single
UTRAN Cell
and Service
Related
Basic Identification
Parameter
0..65534 N/A
This parameter indicates which
uplink inner loop power control
algorithm is used. For algorithm
1 inner loop power control is
done every time slot. For
UTRAN Cell
and Service
Related
Power Control
1: Algorithm 1
2: Algorithm 2
N/A
This parameter indicates the
TPC step size for uplink inner
loop power control. Only when
inner loop power control
algorithm 1 is selected, this
UTRAN Cell
and Service
Related
Power Control 1..2 dB
This parameter indicates the
step of increasing the uplink SIR
target. In order to restore
communication quality as soon
as possible when it becomes
UTRAN Cell
and Service
Related
Power Control 0.1..0.5, step 0.1 dB
This parameter indicates the
step of decreasing the uplink SIR
target. In order to restore
communication quality as soon
as possible when it becomes
UTRAN Cell
and Service
Related
Power Control 0.1..0.5, step 0.1 dB
This parameter indicates the
maximum step of decreasing the
uplink SIR target.
This parameter is a 9-element
array, each element used in
UTRAN Cell
and Service
Related
Power Control 0.1..1, step 0.1 dB
This parameter indicates the
maximum step size of increasing
the uplink SIR target.
This parameter is a 9-element
array, each element used in
UTRAN Cell
and Service
Related
Power Control 0.1..1, step 0.1 dB
This parameter indicates the
step size fo the downlink inner
loop power control. Normally, the
value in good channel condition
is smaller than in bad channel
UTRAN Cell
and Service
Related
Power Control 0.5..2 dB
This parameter indicates the
transport channel BLER quality
target, which is the base of outer
loop power control. For the
service with more than one
UTRAN Cell
and Service
Related
Power Control
0: 0
1:
6.3095734448019
15e-007
2:
N/A
This parameter indicates the
error transport block number
threshold in outer loop power
control using threshold algorithm.
When the number of error blocks
UTRAN Cell
and Service
Related
Power Control 1..50, Step 1 TBs
When the tolerance period is not
over, the number of error block is
exceed the error block threshold,
then adjust the SIRtarget
upward; when the tolerance
UTRAN Cell
and Service
Related
Power Control 1..65535, Step 1 TBs
This parameter indicates the
threshold of HARQ failure
indication number to increase
SIR target when E-TTI=2ms. If
the times of HARQ failure
UTRAN Cell
and Service
Related
Power Control 0..255 N/A
This parameter indicates the
threshold of HARQ failure
indication number to increase
SIR target when E-TTI=10ms. If
the times of HARQ failure
UTRAN Cell
and Service
Related
Power Control 0..255 N/A
This parameter indicates the
number of HARQ retransmission
(NHR) threshold to increase SIR
target when E-TTI=10ms. When
the NHR exceeds the threshold,
UTRAN Cell
and Service
Related
Power Control 0..15, step 0.01 N/A
This parameter indicates the
number of HARQ retransmission
(NHR) threshold to decrease SIR
target when E-TTI=10ms. When
the NHR is less than the
UTRAN Cell
and Service
Related
Power Control 0..15, step 0.01 N/A
This parameter indicates the
number of HARQ retransmission
(NHR) threshold to increase SIR
target when E-TTI=2ms. When
the NHR exceeds the threshold,
UTRAN Cell
and Service
Related
Power Control 0..15, step 0.01 N/A
This parameter indicates the
number of HARQ retransmission
(NHR) threshold to decrease SIR
target when E-TTI=2ms. When
the NHR is less than the
UTRAN Cell
and Service
Related
Power Control 0..15, step 0.01 N/A
This parameter indicates the
hreshold of sample number to
increase SIR target when E-
TTI=10ms. The SIR target can
not be increased unless the
UTRAN Cell
and Service
Related
Power Control 0..255 N/A
This parameter indicates the
threshold of sample number to
decrease SIR target when E-
TTI=10ms. The SIR target can
not be decreased unless the
UTRAN Cell
and Service
Related
Power Control 0..255 N/A
This parameter indicates the
hreshold of sample number to
increase SIR target when E-
TTI=2ms. The SIR target can not
be increased unless the sample
UTRAN Cell
and Service
Related
Power Control 0..255 N/A
This parameter indicates the
threshold of sample number to
decrease SIR target when E-
TTI=2ms. The SIR target can not
be decreased unless the sample
UTRAN Cell
and Service
Related
Power Control 0..255 N/A
This parameter indicates the
BER target for a physical
channel out Valid Time Windows
when the FP Mode is normal,
which is the base of outer loop
UTRAN Cell
and Service
Related
Parameter for future
use
0..100, step 0.1 %
This parameter indicates the
BER target for a physical
channel in Valid Time Windows
when the FP mode is silent,
which is the base of outer loop
UTRAN Cell
and Service
Related
Power Control 0..100, step 0.1 %
This parameter indicates the
number threshold of physical
channel BER less than or equal
BER target in the uplink outer
loop power control QE based
UTRAN Cell
and Service
Related
Power Control 1..20 N/A
This parameter indicates the
error transport block number
threshold for BER target adjust in
fast OLPC SIR target downward
adjustment based on BER. If the
UTRAN Cell
and Service
Related
Parameter for future
use
0..10, Step 1 TBs
This parameter indicates the
transport block number threshold
for BER target adjust in fast
OLPC SIR target downward
adjustment based on BER. If the
UTRAN Cell
and Service
Related
Parameter for future
use
0..100, Step 1 TBs
This parameter indicates the
step of decreasing the BER
target in fast OLPC SIR target
downward adjustment based on
BER. When the quality of traffic
UTRAN Cell
and Service
Related
Parameter for future
use
0..50 N/A
This parameter indicates the
step of increasing the BER target
in fast OLPC SIR target
downward adjustment based on
BER. When the quality of traffic
UTRAN Cell
and Service
Related
Parameter for future
use
0..50 N/A
This parameter indicates
whether uplink outer loop power
control (OLPC) based on
SIRtarget adaptive down step
size is used or not.
UTRAN Cell
and Service
Related
Power Control
0: Off
1: On
N/A
This parameter indicates the
maximum BER target in fast
OLPC SIR target downward
adjustment based on BER. This
parameter value is used to give
UTRAN Cell
and Service
Related
Parameter for future
use
0..155 N/A
This parameter indicates the
minimum BER target in fast
OLPC SIR target downward
adjustment based on BER. This
parameter value is used to give
UTRAN Cell
and Service
Related
Parameter for future
use
0..155 N/A
This parameter indicates
whether uplink outer loop power
control (OLPC) based on QE is
used or not in Valid Time
Windows if the FP Mode is silent.
UTRAN Cell
and Service
Related
Power Control
0: Off
1: On
N/A
This parameter indicates the E-
DCH HARQ power offset FDD,
which is used to compute the
quantized gain factor ed of E-
DPDCH. For detail descriptions
Service
Related
Power Control 0..6 N/A
This parameter indicates the
additional SIR target down step
size of the SIR target rapid
convergence function.
UTRAN Cell
and Service
Related
Power Control 0..2, step 0.1 dB
This parameter indicates uplink
SIR target up step size for R99.
This parameter is a 9-element
array, each element used in
different load condition, and the
UTRAN Cell
and Service
Related
Power Control 0.0..5.0, step 0.1 dB
This parameter indicates uplink
SIR target up step size for
HSUPA (2ms E-TTI).
This parameter is a 9-element
array, each element used in
UTRAN Cell
and Service
Related
Power Control 0.0..5.0, step 0.1 dB
This parameter indicates uplink
SIR target up step size for
HSUPA (10ms E-TTI).
This parameter is a 9-element
array, each element used in
UTRAN Cell
and Service
Related
Power Control 0.0..5.0, step 0.1 dB
This parameter indicates the
target number of HARQ
retransmission.
This parameter is a 9-element
array, each element used in
UTRAN Cell
and Service
Related
Power Control 0..50 N/A
This parameter indicates the
target rate of error frame (2ms E-
TTI).
This parameter is a 9-element
array, each element used in
UTRAN Cell
and Service
Related
Power Control 0..100, step 0.1 %
This parameter indicates the
target rate of error frame (10ms
E-TTI).
This parameter is a 9-element
array, each element used in
UTRAN Cell
and Service
Related
Power Control 0..100, step 0.1 %
This parameter indicates the
BER target up threshold.
This parameter is a 9-element
array, each element used in
different load condition, and the
UTRAN Cell
and Service
Related
Power Control 0..100, step 0.1 %
This parameter indicates the
BER target down threshold.
This parameter is a 9-element
array, each element used in
different load condition, and the
UTRAN Cell
and Service
Related
Power Control 0..100, step 0.1 %
This parameter indicates the
time window size in the BER
algorithm.
UTRAN Cell
and Service
Related
Power Control 0..8, step 0.1 s
This parameter indicates the TTI
threshold of opening BER
algorithm
UTRAN Cell
and Service
Related
Power Control 0..200 N/A
This parameter indicates the TTI
threshold of closing BER
algorithm
UTRAN Cell
and Service
Related
Power Control 0..200 N/A
This parameter indicates The
number threshold of trigging
SIRtarget adjustment
UTRAN Cell
and Service
Related
Power Control 1..20 N/A
The switch for priority outer loop
power control. OLPC includes
two parts: normal OLPC and
priority OLPC. The normal OLPC
should be used default, the
UTRAN Cell
and Service
Related
Power Control
0: Off
1: On
N/A
Power Control Related to Service
Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the sub
service type, used for numbering
for each sub service. 0...5 are
used for siganlling service;
6...250 are used for single
Service
Related
Basic Identification
Parameter
0..65534 N/A
This parameter indicates the
step of increasing the uplink SIR
target for white list users. In
order to restore communication
quality as soon as possible when
Service
Related
VIP QoS Guarantee 0.1..0.5, step 0.1 dB
This parameter indicates the
step of decreasing the uplink SIR
target for white list users. In
order to restore communication
quality as soon as possible when
Service
Related
VIP QoS Guarantee 0.1..0.5, step 0.1 dB
This parameter indicates the
maximum step of decreasing the
uplink SIR target for white list
users.
This parameter is a triple array,
Service
Related
VIP QoS Guarantee 0.1..1, step 0.1 dB
This parameter indicates the
maximum step size of increasing
the uplink SIR target.
This parameter is a triple array,
each element used in different
Service
Related
VIP QoS Guarantee 0.1..1, step 0.1 dB
This parameter indicates
whether uplink outer loop power
control (OLPC) based on
SIRtarget adaptive down step
size is used or not for white list
Service
Related
VIP QoS Guarantee
0: Off
1: On
N/A
This parameter indicates the
maximum downlink DPCH
transmission power for white list
users. When performing the
downlink inner loop power
Service
Related
VIP QoS Guarantee -35..15, step 0.1 dB
This parameter indicates the
minimum downlink DPCH
transmission power for white list
users. When performing the
downlink inner loop power
Service
Related
VIP QoS Guarantee -35..15, step 0.1 dB
This parameter indicates the
quality factor of the UL DPCCH
PILOT domain for white list
users. It is used for calculating
the UL DPCCH power offset for
Service
Related
VIP QoS Guarantee -30..30, step 0.1 dB
This parameter indicates the
maximum allowed UL power for
white list users. When
performing the uplink inner loop
power control, the newly
Service
Related
VIP QoS Guarantee -50..33, step 1 dBm
This parameter indicates the
initial SIR target for white list
users. The target SIR is the
standard to perform the uplink
inner loop power control. The
Service
Related
VIP QoS Guarantee
-8.2..17.3, step
0.1
dB
This parameter indicates the
maximum uplink SIR target for
white list users, which is used to
give the range for the target SIR
of the outer loop power control.
Service
Related
VIP QoS Guarantee
-8.2..17.3, step
0.1
dB
This parameter indicates the
minimum uplink SIR target for
white list users, which is used to
give the range for the target SIR
of the outer loop power control.
Service
Related
VIP QoS Guarantee
-8.2..17.3, step
0.1
dB
The parameter indicates the
transport channel BLER quality
target for white list users, which
is the base of outer loop power
control. For the service with
Service
Related
VIP QoS Guarantee
0: 0
1:
6.3095734448019
15e-007
2:
N/A
This parameter indicates the
error transport block number
threshold in outer loop power
control using threshold algorithm
for white list users. When the
Service
Related
VIP QoS Guarantee 1..50, Step 1 TBs
The parameter indicates the
tolerance period in uplink outer
loop power control using
threshold algorithm for white list
users. When the tolerance
Service
Related
VIP QoS Guarantee 1..65535, Step 1 TBs
This parameter indicates the
threshold of HARQ failure
indication number to increase
SIR target for white list users
when E-TTI=10ms. If the times of
Service
Related
VIP QoS Guarantee 0..255 N/A
This parameter indicates the
threshold of HARQ failure
indication number to increase
SIR target for white list users
when E-TTI=2ms. If the times of
Service
Related
VIP QoS Guarantee 0..255 N/A
This parameter indicates the
number of HARQ retransmission
(NHR) threshold to decrease SIR
target for white list users when E-
TTI=10ms. When the NHR is
Service
Related
VIP QoS Guarantee 0..15, step 0.01 N/A
This parameter indicates the
number of HARQ retransmission
(NHR) threshold to increase SIR
target for white list users when E-
TTI=10ms. When the NHR
Service
Related
VIP QoS Guarantee 0..15, step 0.01 N/A
This parameter indicates the
threshold of sample number to
increase SIR target for white list
users when E-TTI=10ms. The
SIR target can not be increased
Service
Related
VIP QoS Guarantee 0..255 N/A
This parameter indicates the
threshold of sample number to
decrease SIR target for white list
users when E-TTI=10ms. The
SIR target can not be decreased
Service
Related
VIP QoS Guarantee 0..255 N/A
This parameter indicates the
number of HARQ retransmission
(NHR) threshold to decrease SIR
target for white list users when E-
TTI=2ms. When the NHR is less
Service
Related
VIP QoS Guarantee 0..15, step 0.01 N/A
This parameter indicates the
number of HARQ retransmission
(NHR) threshold to increase SIR
target for white list users when E-
TTI=2ms. When the NHR
Service
Related
VIP QoS Guarantee 0..15, step 0.01 N/A
This parameter indicates the
threshold of sample number to
increase SIR target for white list
users when E-TTI=2ms. The SIR
target can not be increased
Service
Related
VIP QoS Guarantee 0..255 N/A
This parameter indicates the
threshold of sample number to
decrease SIR target for white list
users when E-TTI=2ms. The SIR
target can not be decreased
Service
Related
VIP QoS Guarantee 0..255 N/A
This parameter indicates
whether uplink outer loop power
control (OLPC) based on QE is
used or not in the valid time
window for white list user if the
Service
Related
VIP QoS Guarantee
0: Off
1: On
N/A
This parameter indicates the
white list users BER target for a
physical channel in Valid Time
Windows when the FP mode is
silent, which is the base of outer
Service
Related
VIP QoS Guarantee 0..100, step 0.1 %
This parameter indicates the
number threshold of physical
channel BER less than or equal
BER target in the uplink outer
loop power control BER based
Service
Related
VIP QoS Guarantee 1..20 N/A
This parameter indicates the E-
DCH HARQ power offset FDD
for white list users, which is used
to compute the quantized gain
factor ed of E-DPDCH. For
Service
Related
VIP QoS Guarantee 0..6 N/A
This parameter indicates the
additional SIR target down step
size of the SIR target rapid
convergence function.
Service
Related
Power Control 0..2, step 0.1 dB
This parameter indicates the
initial value for BLER based SIR
target in the SIR target rapid
convergence function.
This parameter is a triple array,
Service
Related
Power Control -8.2..17.3, step 0.1 dB
This parameter indicates the
initial value for additional SIR
target in the SIR target rapid
convergence function.
This parameter is a triple array,
Service
Related
Power Control -8.2..17.3, step 0.1 dB
This parameter indicates uplink
SIR target up step size for R99.
This parameter is a triple array,
each element used in different
load condition, and the
UTRAN Cell
and Service
Related
Power Control 0.0..5.0, step 0.1 dB
This parameter indicates uplink
SIR target up step size for
HSUPA (2ms E-TTI).
This parameter is a triple array,
each element used in different
UTRAN Cell
and Service
Related
Power Control 0.0..5.0, step 0.1 dB
This parameter indicates uplink
SIR target up step size for
HSUPA (10ms E-TTI).
This parameter is a triple array,
each element used in different
UTRAN Cell
and Service
Related
Power Control 0.0..5.0, step 0.1 dB
This parameter indicates the
target number of HARQ
retransmission.
This parameter is a triple array,
each element used in different
UTRAN Cell
and Service
Related
Power Control 0..50 N/A
This parameter indicates the
target rate of error frame (2ms E-
TTI).
This parameter is a triple array,
each element used in different
UTRAN Cell
and Service
Related
Power Control 0..100, step 0.1 %
This parameter indicates the
target rate of error frame (10ms
E-TTI).
This parameter is a triple array,
each element used in different
UTRAN Cell
and Service
Related
Power Control 0..100, step 0.1 %
This parameter indicates the
BER target up threshold.
This parameter is a triple array,
each element used in different
load condition, and the
UTRAN Cell
and Service
Related
Power Control 0..100, step 0.1 %
This parameter indicates the
BER target down threshold.
This parameter is a triple array,
each element used in different
load condition, and the
UTRAN Cell
and Service
Related
Power Control 0..100, step 0.1 %
This parameter indicates The
number threshold of trigging
SIRtarget adjustment
UTRAN Cell
and Service
Related
Power Control 1..20 N/A
This parameter is the power
control related to service and
diversity mode object ID.
UTRAN Cell
and Service
Related
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
transmit diversity mode used by
this set of diversity mode and
service related power control
parameters.
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control
0: None
1: STTD
2: Closed Loop
Mode 1
N/A
This parameter indicates the
maximum downlink DPCH
transmission power. When
performing the downlink inner
loop power control, the new
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control
/Handover Control
/AMR-NB & AMR-
WB
-35..15, step 0.1 dB
This parameter indicates the
minimum downlink DPCH
transmission power. When
performing the downlink inner
loop power control, the new
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control /
Admission Control
-35..15, step 0.1 dB
This parameter indicates the
power offset between the DL
DPCH TFCI domain and the
DPCH data domain.
This parameter is a 9-element
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control 0..6, step 0.25 dB
This parameter indicates the
power offset between the DL
DPCH TPC domain and the
DPCH data domain.
This parameter is a 9-element
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control 0..6, step 0.25 dB
This parameter indicates the
power offset between the DL
DPCH PILOT domain and the
DPCH data domain.
This parameter is a 9-element
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control 0..6, step 0.25 dB
This parameter indicates the
quality factor of the UL DPCCH
PILOT domain which is a
constant used for calculating the
UL DPCCH power offset for a
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control -30..30, step 0.1 dB
This parameter indicates the
maximum allowed UL power
used to limit the maximum
transmission power of the UE.
When performing the uplink
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control /AMR-
NB & AMR-WB
-50..33, step 1 dBm
This parameter indicates the
initial SIR target of the uplink
physical channel. The target SIR
is the standard to perform the
uplink inner loop power control.
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control
-8.2..17.3, step
0.1
dB
This parameter indicates the
maximum uplink target SIR,
which is used to give the range
for the target SIR of the outer
loop power control.
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control
/Handover Control
-8.2..17.3, step
0.1
dB
This parameter indicates the
minimum uplink target SIR,
which is used to give the range
for the target SIR of the outer
loop power control.
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control
-8.2..17.3, step
0.1
dB
This parameter indicates the
power offset relative to DL DPCH
pilot domain configured for E-
AGCH in 2ms E-TTI.
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control
-32..31.75, step
0.25
dB
This parameter indicates the
power offset relative to DL DPCH
pilot domain configured for E-
AGCH in 10ms E-TTI.
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control
-32..31.75, step
0.25
dB
This parameter indicates the
power offset relative to DL DPCH
pilot domain configured for E-
RGCH in 2ms E-TTI and single
link condition.
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control
-32..31.75, step
0.25
dB
This parameter indicates the
power offset relative to DL DPCH
pilot domain configured for E-
RGCH in 10ms E-TTI and single
link condition.
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control
-32..31.75, step
0.25
dB
This parameter indicates the
power offset relative to DL DPCH
pilot domain configured for E-
HICH in 2ms E-TTI and single
link condition.
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control
-32..31.75, step
0.25
dB
This parameter indicates the
power offset relative to DL DPCH
pilot domain configured for E-
HICH in 10ms E-TTI and single
link condition.
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control
-32..31.75, step
0.25
dB
This parameter indicates the
transmission power of the
SCCPCH used for bearring
MTCH information when the cell
is in island status.
UTRAN Cell,
Service and
Diversity
Mode Related
MBMS -35..5, step 1 dB
This parameter indicates the
SCCPCH power for cell in half-
island status. RNC shall use the
power configured by this
parameter in case that the cell is
UTRAN Cell,
Service and
Diversity
Mode Related
MBMS -8..0 , step 1 dB
This parameter indicates the
initial value for BLER based SIR
target in the SIR target rapid
convergence function.
This parameter is a 9-element
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control -8.2..17.3, step 0.1 dB
This parameter indicates the
initial value for additional SIR
target in the SIR target rapid
convergence function.
This parameter is a 9-element
UTRAN Cell,
Service and
Diversity
Mode Related
Power Control -8.2..17.3, step 0.1 dB
This parameter indicates
reference to Module object.
RNC
Basic Identification
Parameter
N/A N/A
This parameter indicates Proc
Instant Number that the NODEB
belongs to.
RNC Equipment
1..DBS_RR_MAX_
NUM_PROC
N/A
This parameter indicates the
Node B type.
Node B
Basic Identification
Parameter
0: General NodeB
1: Pico Node B
2: Home NodeB
N/A
This parameter indicates the
control method to share the HS-
PDSCH channelization codes
among the cells of the same
NodeB.
Node B
Code Resource
Allocation
0: Not Sharing
1: RNC Control
N/A
This parameter indicates
whether Node B supports HS-
DSCH congestion detection.
Node B Overbooking on Iux
0: Not Supported
1: Supported
N/A
This parameter indicates
whether Node B supports E-DCH
congestion detection.
Node B
HSUPA Packet
Scheduling
0: Not Supported
1: Supported
N/A
This parameter indicates the Iub
interface satellite transport
delay.There are three time delay
levels: 20ms (Low Earth Orbit
and Terrestrial transmission),
Node B
RAN Transmission
Overview /Handover
Control /HSUPA
Packet
Scheduling/Admissi
0: 20
1: 100
2: 400
ms
This parameter indicates the Iub
interface transport delay jitter.
Radio network lay user-plane will
add jitter to TOAWS in FP
SETUP procedure.
Node B
RAN Transmission
Overview /HSUPA
Packet Scheduling
0..100, Step 1 ms
This parameter indicates the
period to update the HS-PDSCH
code number to share for each
one of the cells of the same
NodeB.
Node B
Code Resource
Allocation
5..65535, step 5 s
This parameter indicates the
balancing type of the DL power,
which can take the value of
None, Common or Individual.
None indicates there is no need
Node B Power Control
0: None
1: Common
N/A
This parameter indicates the
audit timer of Node B resource.
According to the timer, RNC
audits resource in Node B
periodically.
Node B
Node B
Management
200..65535, Step 1 100ms
When there exists a radio link
and needs to build another radio
link, this parameters indicates
whether the current radio link
and the existing radio link will be
Node B
Node B
Management
0: May
1: Must
2: Must not
N/A
Specifies the time delay of
deleting cell resource when
Node B is unreachable.
Start: RNC detects the link of
transport layer between RNC
NodeB
NodeB
Management
100..65535, Step 1 100ms
This parameter indicates timer
length of delay process when
ATM link broken.
Start: When NBNM received AAL
link broken indication, the timer
RNC
Node B
Management
0..500, Step 1 100ms
This parameter indicates timer
length of delay process when IP
link broken.
Start: When NBNM received
association link broken
RNC
Node B
Management
0..500, Step 1 100ms
Share Mode of CE Resource for
Multi-Operators: Mode 0
indicates" Minimal CE
Percentage should be
guaranteed for operators
Node B
RAN Sharing
/Admission Control
0: Minimal CE
Percentage should
be guaranteed for
operators whether
CE Resource is
N/A
CE Share Switch for Carrier
Sharing
Node B
RAN Sharing
/Admission Control
0: Off
1: On
N/A
The parameter indicates whether
NodeB support DPI-SPI change
or not
NE Office DPI
0: Not support DPI-
SPI change
1: Support DPI-
SPI change
N/A
Associated NodeB N/A N/A N/A N/A
Associated UtranCell List N/A N/A N/A N/A
BandWidth of Iub Interface N/A N/A 0..65535, step 1 M
Minimal percent of CE can be
used by the PLMN for RAN
Sharing while carrier sharing,
which can not be occupied by
other operator (PLMN)
Node B
RAN Sharing
/Admission Control
0..100, step 0.1 %
Basic Priority Transport Bearer
Type Index RNC QoS Guarantee N/A N/A
Transport layer Qos Profile
parameter mapping Index for
each Iub adjacent NE.
NE Office
DiffServ, Transport
CAC, MultiPath
Protection on Iub
Interface, AAL2
Quality of Service
N/A N/A
This parameter is UTRAN
Registration Area Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
UTRAN registration area ID. One
cell can belong to at most four
URAs (MAX_URA=4). Different
UE that resides in this cell can
belong to different URA.
UTRAN Cell
Basic Identification
Parameter
0..65535 N/A
This parameter indicates the
Traffic Volume Measurement
Profile Object ID.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates traffic
volume measurement profile
identity
RNC
Dynamic Radio
Bearer Control
0..9 N/A
This parameter indicates the UE
Traffic Volume Event
Measurement Configuration
Object ID for RACH.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates event
number of UE traffic volume
measurement.
UTRAN Cell
Dynamic Radio
Bearer Control
1..2 N/A
This parameter indicates the
event identity of the traffic
volume measurement performed
by UE.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on RACH channel.
If the traffic volume becomes
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
Dynamic Radio
Bearer Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
pending time after trigger. This
timer is started in the UE when a
measurement report has been
triggered by a given event. The
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
ms
This parameter indicates
whether Tx interruption after
trigger is configured or not.
Where
MAX_UE_TRV_MEAS_EVENT
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates the
time of prohibiting transmitting
data on RACH. Only when traffic
volume measurement is on
RACH, can this parameter be
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
ms
This parameter indicates the UE
Traffic Volume Period
Measurement Configuration
Object ID for RACH.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates the
amount of reporting for periodic
reporting mode.
UTRAN Cell
Dynamic Radio
Bearer Control
0: 1
1: 2
2: 4
3: 8
4: 16
N/A
This parameter indicates the
reporting interval for periodic
reporting mode.
UTRAN Cell
Dynamic Radio
Bearer Control
1: 250
2: 500
3: 1000
4: 2000
5: 3000
ms
This parameter indicates the UP
Traffic Volume Event
Measurement Configuration
Object ID for FACH.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates event
number of UE traffic volume
measurement.
UTRAN Cell
Dynamic Radio
Bearer Control
1..2 N/A
This parameter indicates the
event identity of the traffic
volume measurement performed
by UE.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on FACH channel.
If the traffic volume becomes
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
Dynamic Radio
Bearer Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
pending time after trigger. This
timer is started in the UE when a
measurement report has been
triggered by a given event. The
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
ms
This parameter indicates the UE
Traffic Volume Event
Measurement Configuration
Object ID for DCH.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates event
number of UE traffic volume
measurement.
UTRAN Cell
Dynamic Radio
Bearer Control
1..2 N/A
This parameter indicates the
event identity of the traffic
volume measurement performed
by UE.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 8 kbps. If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 16 kbps If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 32 kbps. If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 64 kbps. If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 128 kbps. If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 256 kbps. If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 384 kbps. If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
Dynamic Radio
Bearer Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
pending time after trigger. This
timer is started in the UE when a
measurement report has been
triggered by a given event. The
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
ms
This parameter indicates the UP
Traffic Volume Event
Measurement Configuration
Object ID for DCH.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates event
number of UE traffic volume
measurement.
UTRAN Cell
Dynamic Radio
Bearer Control
1..2 N/A
This parameter indicates the
event identity of the traffic
volume measurement performed
by UE.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 8 kbps. If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 16 kbps If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 32 kbps. If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 64 kbps. If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 128 kbps. If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 256 kbps. If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on DCH whose
rate is 384 kbps. If the traffic
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
Dynamic Radio
Bearer Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
pending time after trigger. This
timer is started in the UE when a
measurement report has been
triggered by a given event. The
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
ms
This parameter indicates the UE
Traffic Volume Period
Measurement Configuration
Object ID for DCH.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates the
amount of reporting for periodic
reporting mode.
UTRAN Cell
Dynamic Radio
Bearer Control
0: 1
1: 2
2: 4
3: 8
4: 16
N/A
This parameter indicates the
reporting interval for periodic
reporting mode.
UTRAN Cell
Dynamic Radio
Bearer Control
1: 250
2: 500
3: 1000
4: 2000
5: 3000
ms
This parameter indicates the UP
Traffic Volume Measurement
Configuration Number for
Streaming Class on HS-DSCH
Object ID.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates event
number of UE traffic volume
measurement.
UTRAN Cell
Dynamic Radio
Bearer Control
1..2 N/A
This parameter indicates the
event identity of the traffic
volume measurement performed
by UE.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement for Streaming
Class on HS-DSCH Channel. If
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
Dynamic Radio
Bearer Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
pending time after trigger. This
timer is started in the UE when a
measurement report has been
triggered by a given event. The
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
ms
This parameter indicates the UP
Traffic Volume Measurement
Configuration for Interactive and
Background Class on HS-DSCH
Object ID.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates event
number of UE traffic volume
measurement.
UTRAN Cell
Dynamic Radio
Bearer Control
1..2 N/A
This parameter indicates the
event identity of the traffic
volume measurement performed
by UE.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement for Interactive and
Background Class on HS-DSCH
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
Dynamic Radio
Bearer Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
pending time after trigger. This
timer is started in the UE when a
measurement report has been
triggered by a given event. The
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
ms
This parameter indicates the UP
Traffic Volume Measurement
Configuration for HS-DSCH in
CELL_FACH Object ID.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates event
number of UE traffic volume
measurement.
UTRAN Cell
Dynamic Radio
Bearer Control
1..2 N/A
This parameter indicates the
event identity of the traffic
volume measurement performed
by UE.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on HS-DSCH
Channel in CELL_FACH. If the
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
Dynamic Radio
Bearer Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
pending time after trigger. This
timer is started in the UE when a
measurement report has been
triggered by a given event. The
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
ms
This parameter indicates the UP
Throughput Event Measurement
Configuration for E-TTI Switching
Object ID.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates event
number of UE traffic volume
measurement.
UTRAN Cell
Dynamic Radio
Bearer Control
1..2 N/A
This parameter indicates the
event identity of the traffic
volume measurement performed
by UE.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A
This parameter indicates the
reporting threshold of event 4A
and 4B for throughput
measurement on E-DCH. If the
throughput becomes larger than
RNC
Dynamic Radio
Bearer Control
1..2000, Step 1 kbps
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
Dynamic Radio
Bearer Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
pending time after trigger. This
timer is started in the UE when a
measurement report has been
triggered by a given event. The
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
ms
This parameter indicates the UP
Traffic Volume Measurement
Configuration Object ID for E-
DCH.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates event
number of UE traffic volume
measurement.
UTRAN Cell
Dynamic Radio
Bearer Control
1..2 N/A
This parameter indicates the
event identity of the traffic
volume measurement performed
by UE.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on E-DCH
channel. If the traffic volume
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
Dynamic Radio
Bearer Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
pending time after trigger. This
timer is started in the UE when a
measurement report has been
triggered by a given event. The
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
ms
This parameter indicates the UP
Traffic Volume Measurement
Configuration for E-DCH in
CELL_FACH Object ID.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates event
number of UE traffic volume
measurement.
UTRAN Cell
Dynamic Radio
Bearer Control
1..2 N/A
This parameter indicates the
event identity of the traffic
volume measurement performed
by UE.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A
This parameter indicates the
reporting threshold of event 4A
and 4B for traffic volume
measurement on E-DCH
Channel in CELL_FACH. If the
UTRAN Cell
Dynamic Radio
Bearer Control
0: 8
1: 16
2: 32
3: 64
4: 128
bytes
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
Dynamic Radio
Bearer Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
pending time after trigger. This
timer is started in the UE when a
measurement report has been
triggered by a given event. The
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
ms
This parameter indicates the UP
Traffic Volume Measurement
Configuration Object ID for E-
DCH.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
time interval for taking an
average or a variance, which is
only valid when the
measurement quantity is
UTRAN Cell
Dynamic Radio
Bearer Control
20..260, step 20 ms
This parameter indicates event
number of UE traffic volume
measurement.
UTRAN Cell
Dynamic Radio
Bearer Control
1..2 N/A
This parameter indicates the
event identity of the traffic
volume measurement performed
by UE.
Where
UTRAN Cell
Dynamic Radio
Bearer Control
0: 4a
1: 4b
N/A
This parameter indicates the
pending time after trigger. This
timer is started in the UE when a
measurement report has been
triggered by a given event. The
UTRAN Cell
Dynamic Radio
Bearer Control
0: 250
1: 500
2: 1000
3: 2000
4: 4000
ms
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
Dynamic Radio
Bearer Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the E-
DCH Channel throughput
measurement threshold of Event
4A/4B for HS-DSCH/E-DCH to
HS-DSCH/DCH switching. If the
RNC
Dynamic Radio
Bearer Control
1..2000, Step 1 kbps
This parameter indicates the
measurement quantity of the
traffic volume measurement that
UE performs.
UTRAN Cell
Dynamic Radio
Bearer Control
1: RLC buffer
payload,
2: Average RLC
buffer payload
3: Variance of
N/A
This parameter indicates the
RLC mode of the traffic volume
measurement report. If the value
is AM RLC, RNC can request UE
for retransmission after receiving
UTRAN Cell
Dynamic Radio
Bearer Control
0: Acknowledged
Mode RLC
1:
Unacknowledged
Mode RLC
N/A
This parameter indicates
whether the report of RLC buffer
payload for each radio bear is
requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of average of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates
whether the report of variance of
RLC buffer payload for each
radio bear is requested or not.
UTRAN Cell
Dynamic Radio
Bearer Control
0: False
1: True
N/A
This parameter indicates Object
ID of Intra-frequency
measurement profile
configuration.
RNC
Basic Identification
Parameter
0..2147483647 N/A
The parameter indicates Intra-
frequency measurement profile
identity.
UTRAN Cell Handover Control 0..99 N/A
The parameter indicates
handover and cell reselection
scenarios.For each scenario, the
corresponding parameters can
be set as different values.
UTRAN Cell Handover Control
0: Outdoor Scene
1: High-Mobility
Outdoor Scene
2: Indoor Scene
3: Subway/ tunnel
N/A
This parameter indicates Object
ID of Intra-frequency
measurement configuration
related to traffic category.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter differentiate
different sets of handover
parameter according to different
traffic type. Taking account of
various characteristic of service,
UTRAN Cell
and Service
Related
Handover Control
0: RT RAB
Including Voice
(RT RAB Including
Voice)
1: RT RAB
N/A
This parameter indicates Object
ID of Intra-frequency event
measurement configuration for
CPICH Ec/No
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the intra-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates number
of events required to be
configured for the set of the intra-
frequency measurement
parameters for a certain
UTRAN Cell
and Service
Related
Handover Control 1..7 N/A
This parameter indicates the
event ID triggered by the intra-
frequency measurement.
MAX_INTRA_MEAS_EVENT
indicates the maximum number
UTRAN Cell
and Service
Related
Handover Control
0: 1a
1: 1b
2: 1c
3: 1d
4: 1e
N/A
This parameter controls the
triggering of event 1a/1b. 1a is
easier but 1b is harder to trigger
when this value increases; and
vice verse.
UTRAN Cell
and Service
Related
Handover Control 0..14.5, step 0.5 dB
This parameter is used for
quality judgment of event 1a and
1b, which indicates the weight of
the best cell in the quality
judgment and is related to the
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control 0..7.5, step 0.5 dB
This parameter indicates the
absolute threshold value used for
event 1e/1f.
MAX_INTRA_MEAS_EVENT
indicates the maximum number
UTRAN Cell
and Service
Related
Handover Control -24..0, Step: 1 dB
This parameter indicates the
maximum number of the cells
that can exist in active set. When
the UE detects that one cell in
the monitoring set satisfies the
UTRAN Cell
and Service
Related
Handover Control 0..7 N/A
This parameter indicates the
minimum number of the cell that
can exist in the DCH active set
when triggering event 1c or in the
E-DCH active set when
UTRAN Cell
and Service
Related
Handover Control 0..7 N/A
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
maximum times to report the
measurement report after
triggering event 1a/1b/1c/1j
(because they are reported
UTRAN Cell
and Service
Related
Handover Control
0: 1
1: 2
2: 4
3: 8
4: 16
N/A
This parameter indicates the
time interval to report the
measurement results after
triggering event 1a/1b/1c/1j
(because they are reported
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 250
2: 500
3: 1000
4: 2000
ms
This parameter indicates Object
ID of Intra-frequency event
measurement configuration for
CPICH RSCP
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the intra-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates number
of events required to be
configured for the set of the intra-
frequency measurement
parameters for a certain
UTRAN Cell
and Service
Related
Handover Control 1..7 N/A
This parameter indicates the
event ID triggered by the intra-
frequency measurement.
MAX_INTRA_MEAS_EVENT
indicates the maximum number
UTRAN Cell
and Service
Related
Handover Control
0: 1a
1: 1b
2: 1c
3: 1d
4: 1e
N/A
This parameter controls the
triggering of event 1a/1b. 1a is
easier but 1b is harder to trigger
when this value increases; and
vice verse.
UTRAN Cell
and Service
Related
Handover Control 0..14.5, step 0.5 dB
This parameter is used for
quality judgment of event 1a and
1b, which indicates the weight of
the best cell in the quality
judgment and is related to the
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control 0..7.5, step 0.5 dB
This parameter indicates the
absolute threshold value used for
event 1e/1f.
MAX_INTRA_MEAS_EVENT
indicates the maximum number
UTRAN Cell
and Service
Related
Handover Control -115..-25, Step: 1 dBm
This parameter indicates the
maximum number of the cells
that can exist in active set. When
the UE detects that one cell in
the monitoring set satisfies the
UTRAN Cell
and Service
Related
Handover Control 0..7 N/A
This parameter indicates the
minimum number of the cell that
can exist in the DCH active set
when triggering event 1c or in the
E-DCH active set when
UTRAN Cell
and Service
Related
Handover Control 0..7 N/A
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
maximum times to report the
measurement report after
triggering event 1a/1b/1c/1j
(because they are reported
UTRAN Cell
and Service
Related
Handover Control
0: 1
1: 2
2: 4
3: 8
4: 16
N/A
This parameter indicates the
time interval to report the
measurement results after
triggering event 1a/1b/1c/1j
(because they are reported
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 250
2: 500
3: 1000
4: 2000
ms
This parameter indicates Object
ID of Intra-frequency event
measurement configuration
unrelated to traffic category.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates Object
ID of Intra-frequency period
measurement configuration for
CPICH EcNo.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the intra-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates the
maximum times to report the
measurement results in
periodical reporting.UE uses this
parameter to judge whether it
UTRAN Cell
and Service
Related
Handover Control
0: 1
1: 2
2: 4
3: 8
4: 16
N/A
This parameter indicates the
reporting interval for periodic
reporting mode. UE reports the
measurement results according
to the report intervals.
UTRAN Cell
and Service
Related
Handover Control
1: 250
2: 500
3: 1000
4: 2000
5: 3000
ms
This parameter indicates Object
ID of Intra-frequency period
measurement configuration for
CPICH RSCP.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the intra-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates the
maximum times to report the
measurement results in
periodical reporting.UE uses this
parameter to judge whether it
UTRAN Cell
and Service
Related
Handover Control
0: 1
1: 2
2: 4
3: 8
4: 16
N/A
This parameter indicates the
reporting interval for periodic
reporting mode. UE reports the
measurement results according
to the report intervals.
UTRAN Cell
and Service
Related
Handover Control
1: 250
2: 500
3: 1000
4: 2000
5: 3000
ms
This parameter indicates Object
ID of Intra-frequency detected
set measurement configuration
for CPICH EcNo.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the intra-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter controls the
triggering of event 1a/1b. 1a is
easier but 1b is harder to trigger
when this value increases; and
vice verse.
UTRAN Cell
and Service
Related
Handover Control 0..14.5, step 0.5 dB
This parameter is used for
quality judgment of event 1a and
1b, which indicates the weight of
the best cell in the quality
judgment and is related to the
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control 0..7.5, step 0.5 dB
This parameter indicates the
maximum number of the cells
that can exist in active set. When
the UE detects that one cell in
the monitoring set satisfies the
UTRAN Cell
and Service
Related
Handover Control 0..7 N/A
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
maximum times to report the
measurement report after
triggering event 1a/1b/1c/1j
(because they are reported
UTRAN Cell
and Service
Related
Handover Control
0: 1
1: 2
2: 4
3: 8
4: 16
N/A
This parameter indicates the
time interval to report the
measurement results after
triggering event 1a/1b/1c/1j
(because they are reported
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 250
2: 500
3: 1000
4: 2000
ms
This parameter indicates Object
ID of Intra-frequency detected
set measurement configuration
for CPICH Rscp.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the intra-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter controls the
triggering of event 1a/1b. 1a is
easier but 1b is harder to trigger
when this value increases; and
vice verse.
UTRAN Cell
and Service
Related
Handover Control 0..14.5, step 0.5 dB
This parameter is used for
quality judgment of event 1a and
1b, which indicates the weight of
the best cell in the quality
judgment and is related to the
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control 0..7.5, step 0.5 dB
This parameter indicates the
maximum number of the cells
that can exist in active set. When
the UE detects that one cell in
the monitoring set satisfies the
UTRAN Cell
and Service
Related
Handover Control 0..7 N/A
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
maximum times to report the
measurement report after
triggering event 1a/1b/1c/1j
(because they are reported
UTRAN Cell
and Service
Related
Handover Control
0: 1
1: 2
2: 4
3: 8
4: 16
N/A
This parameter indicates the
time interval to report the
measurement results after
triggering event 1a/1b/1c/1j
(because they are reported
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 250
2: 500
3: 1000
4: 2000
ms
This parameter indicates Object
ID of Inter-frequency
measurement profile
configuration.
RNC
Basic Identification
Parameter
0..2147483647 N/A
The parameter indicates Inter-
frequency measurement profile
identity.
UTRAN Cell Handover Control 0..99 N/A
The parameter indicates
handover and cell reselection
scenarios.For each scenario, the
corresponding parameters can
be set as different values.
UTRAN Cell Handover Control
0: Outdoor Scene
1: High-Mobility
Outdoor Scene
2: Indoor Scene
3: Subway/ tunnel
N/A
This parameter indicates Object
ID of Inter-frequency
measurement configuration
related to traffic category.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter differentiate
different sets of handover
parameter according to different
traffic type. Taking account of
various characteristic of service,
UTRAN Cell
and Service
Related
Handover Control
0: RT RAB
Including Voice
(RT RAB Including
Voice)
1: RT RAB
N/A
This parameter indicates Object
ID of Inter-frequency event
measurement configuration for
CPICH Ec/No (UTRAN).
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the inter-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates how
many events are required to be
configured for the set of the
measurement parameters for a
certain purpose. The defined
UTRAN Cell
and Service
Related
Handover Control 1..6 N/A
This parameter indicates the
event triggered by the inter-
frequency measurement, which
is related to the measurement
quantity.
UTRAN Cell
and Service
Related
Handover Control
0: 2a
1: 2b
2: 2c
3: 2d
4: 2e
N/A
This parameter indicates the
absolute threshold that is
required to be configured for
event 2b/2d/2f (used when
judging the quality of the
UTRAN Cell
and Service
Related
Handover Control -24..0, step 1 dB
This parameter is used for
quality judgment for the carrier of
currently used frequency, which
indicates the weight of the best
cell in the quality judgment and is
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control 0..14.5, step 0.5 dB
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
absolute threshold that is
required to be configured for
event 2b/2c/2e (used when
judging the quality of the not
UTRAN Cell
and Service
Related
Handover Control -24..0, step 1 dB
This parameter is used when
judging the quality of the cells of
not used frequencies. This
parameter indicates the weight of
the best cell in the quality
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates Object
ID of Inter-frequency event
measurement configuration for
CPICH RSCP (UTRAN).
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the inter-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates how
many events are required to be
configured for the set of the
measurement parameters for a
certain purpose. The defined
UTRAN Cell
and Service
Related
Handover Control 1..6 N/A
This parameter indicates the
event triggered by the inter-
frequency measurement, which
is related to the measurement
quantity.
UTRAN Cell
and Service
Related
Handover Control
0: 2a
1: 2b
2: 2c
3: 2d
4: 2e
N/A
This parameter indicates the
absolute threshold that is
required to be configured for
event 2b/2d/2f (used when
judging the quality of the
UTRAN Cell
and Service
Related
Handover Control -115..-25, step 1 dBm
This parameter is used for
quality judgment for the carrier of
currently used frequency, which
indicates the weight of the best
cell in the quality judgment and is
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control 0..14.5, step 0.5 dB
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates the
absolute threshold that is
required to be configured for
event 2b/2c/2e (used when
judging the quality of the not
UTRAN Cell
and Service
Related
Handover Control -115..-25, step 1 dBm
This parameter is used when
judging the quality of the cells of
not used frequencies. This
parameter indicates the weight of
the best cell in the quality
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates Object
ID of Inter-frequency event
measurement configuration for
CPICH Ec/No (GSM).
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the inter-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates how
many events are required to be
configured for the set of the
measurement parameters for a
certain purpose. The defined
UTRAN Cell
and Service
Related
Handover Control 1..6 N/A
This parameter indicates the
event triggered by the inter-
frequency measurement, which
is related to the measurement
quantity.
UTRAN Cell
and Service
Related
Handover Control
3: 2d
5: 2f
N/A
This parameter indicates the
absolute threshold that is
required to be configured for
event 2b/2d/2f (used when
judging the quality of the
UTRAN Cell
and Service
Related
Handover Control -24..0, step 1 dB
This parameter is used for
quality judgment for the carrier of
currently used frequency, which
indicates the weight of the best
cell in the quality judgment and is
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control 0..14.5, step 0.5 dB
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates Object
ID of Inter-frequency event
measurement configuration for
CPICH RSCP (GSM).
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the inter-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates how
many events are required to be
configured for the set of the
measurement parameters for a
certain purpose. The defined
UTRAN Cell
and Service
Related
Handover Control 1..6 N/A
This parameter indicates the
event triggered by the inter-
frequency measurement, which
is related to the measurement
quantity.
UTRAN Cell
and Service
Related
Handover Control
3: 2d
5: 2f
N/A
This parameter indicates the
absolute threshold that is
required to be configured for
event 2b/2d/2f (used when
judging the quality of the
UTRAN Cell
and Service
Related
Handover Control -115..-25, step 1 dBm
This parameter is used for
quality judgment for the carrier of
currently used frequency, which
indicates the weight of the best
cell in the quality judgment and is
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control 0..14.5, step 0.5 dB
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates Object
ID of Inter-frequency event
measurement configuration for
CPICH Ec/No (EUTRAN).
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the inter-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates how
many events are required to be
configured for the set of the
measurement parameters for a
certain purpose. The defined
UTRAN Cell
and Service
Related
Handover Control 1..6 N/A
This parameter indicates the
event triggered by the inter-
frequency measurement, which
is related to the measurement
quantity.
UTRAN Cell
and Service
Related
Handover Control
3: 2d
5: 2f
N/A
This parameter indicates the
absolute threshold that is
required to be configured for
event 2b/2d/2f (used when
judging the quality of the
UTRAN Cell
and Service
Related
Handover Control -24..0, step 1 dB
This parameter is used for
quality judgment for the carrier of
currently used frequency, which
indicates the weight of the best
cell in the quality judgment and is
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control 0..14.5, step 0.5 dB
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates Object
ID of Inter-frequency event
measurement configuration for
CPICH RSCP (EUTRAN).
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the inter-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates how
many events are required to be
configured for the set of the
measurement parameters for a
certain purpose. The defined
UTRAN Cell
and Service
Related
Handover Control 1..6 N/A
This parameter indicates the
event triggered by the inter-
frequency measurement, which
is related to the measurement
quantity.
UTRAN Cell
and Service
Related
Handover Control
3: 2d
5: 2f
N/A
This parameter indicates the
absolute threshold that is
required to be configured for
event 2b/2d/2f (used when
judging the quality of the
UTRAN Cell
and Service
Related
Handover Control -115..-25, step 1 dBm
This parameter is used for
quality judgment for the carrier of
currently used frequency, which
indicates the weight of the best
cell in the quality judgment and is
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control 0..14.5, step 0.5 dB
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates Object
ID of Inter-frequency event
measurement configuration
unrelated to traffic category.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates Object
ID of Inter-frequency period
measurement configuration for
CPICH EcNo.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the inter-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates the
times of the periodical reports to
be reported. If the UE detects
that the times of event reports
exceeds the value of Amount of
UTRAN Cell
and Service
Related
Handover Control
0: 1
1: 2
2: 4
3: 8
4: 16
N/A
This parameter indicates the
intervals of periodical reporting.
For the periodical report, the UE
reports the measurement results
on this parameter.
UTRAN Cell
and Service
Related
Handover Control
1: 250
2: 500
3: 1000
4: 2000
5: 3000
ms
This parameter indicates Object
ID of Inter-frequency period
measurement configuration for
CPICH RSCP.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the inter-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates the
times of the periodical reports to
be reported. If the UE detects
that the times of event reports
exceeds the value of Amount of
UTRAN Cell
and Service
Related
Handover Control
0: 1
1: 2
2: 4
3: 8
4: 16
N/A
This parameter indicates the
intervals of periodical reporting.
For the periodical report, the UE
reports the measurement results
on this parameter.
UTRAN Cell
and Service
Related
Handover Control
1: 250
2: 500
3: 1000
4: 2000
5: 3000
ms
This parameter indicates Object
ID of Inter-rat measurement
profile configuration.
RNC
Basic Identification
Parameter
0..2147483647 N/A
The parameter indicates Inter-
RAT measurement profile
identity.
UTRAN Cell Handover Control 0..99 N/A
The parameter indicates
handover and cell reselection
scenarios.For each scenario, the
corresponding parameters can
be set as different values.
UTRAN Cell Handover Control
0: Outdoor Scene
1: High-Mobility
Outdoor Scene
2: Indoor Scene
3: Subway/ tunnel
N/A
This parameter indicates Object
ID of Inter-rat measurement
configuration related to traffic
category.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter differentiate
different sets of handover
parameter according to different
traffic type. Taking account of
various characteristic of service,
UTRAN Cell
and Service
Related
Handover Control
0: RT RAB
Including Voice
(RT RAB Including
Voice)
1: RT RAB
N/A
This parameter indicates Object
ID of Inter-rat event
measurement configuration for
CPICH Ec/No (GSM).
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the intra-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
UE executes inter-RAT
measurement on L1 in the fixed
cycle (measure several points in
one measurement cycle and L1
filters the measurement results.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates how
many events are required to be
configured for the set of the
measurement parameters for a
certain purpose. The defined
UTRAN Cell
and Service
Related
Handover Control 1..4 N/A
This parameter indicates the
event triggered by the inter-RAT
measurement, which is related to
the measurement quantity.
MAX_RAT_MEAS_EVENT
UTRAN Cell
and Service
Related
Handover Control
0: 3a
1: 3b
2: 3c
3: 3d
N/A
This parameter indicates the
absolute threshold of the UTRAN
cell quality that UE uses to judge
event 3a. The range and unit of
the parameter relate to the
UTRAN Cell
and Service
Related
Handover Control -24..0, step 1 dB
This parameter is used when
judging the quality of the UTRAN
system in inter-RAT
measurement, which indicates
the weight of the best cell in the
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
absolute threshold used when
judging the quality of other RAT
configured for event 3a/3b/3c.
The value range and unit of this
UTRAN Cell
and Service
Related
Handover Control -115..-25, step 1 dBm
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control
0, 0.5..7.5, step
0.5
dB
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates Object
ID of Inter-rat event
measurement configuration for
CPICH RSCP (GSM).
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the intra-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
UE executes inter-RAT
measurement on L1 in the fixed
cycle (measure several points in
one measurement cycle and L1
filters the measurement results.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates how
many events are required to be
configured for the set of the
measurement parameters for a
certain purpose. The defined
UTRAN Cell
and Service
Related
Handover Control 1..4 N/A
This parameter indicates the
event triggered by the inter-RAT
measurement, which is related to
the measurement quantity.
MAX_RAT_MEAS_EVENT
UTRAN Cell
and Service
Related
Handover Control
0: 3a
1: 3b
2: 3c
3: 3d
N/A
This parameter indicates the
absolute threshold of the UTRAN
cell quality that UE uses to judge
event 3a. The range and unit of
the parameter relate to the
UTRAN Cell
and Service
Related
Handover Control -115..-25, step 1 dBm
This parameter is used when
judging the quality of the UTRAN
system in inter-RAT
measurement, which indicates
the weight of the best cell in the
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
absolute threshold used when
judging the quality of other RAT
configured for event 3a/3b/3c.
The value range and unit of this
UTRAN Cell
and Service
Related
Handover Control -115..-25, step 1 dBm
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control
0, 0.5..7.5, step
0.5
dB
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates Object
ID of Inter-rat event
measurement configuration for
CPICH Ec/No (EUTRAN).
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the intra-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
UE executes inter-RAT
measurement on L1 in the fixed
cycle (measure several points in
one measurement cycle and L1
filters the measurement results.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates how
many events are required to be
configured for the set of the
measurement parameters for a
certain purpose. The defined
UTRAN Cell
and Service
Related
Handover Control 1..4 N/A
This parameter indicates the
event triggered by the inter-RAT
measurement, which is related to
the measurement quantity.
MAX_RAT_MEAS_EVENT
UTRAN Cell
and Service
Related
Handover Control
0: 3a
1: 3b
2: 3c
3: 3d
N/A
This parameter indicates the
absolute threshold of the UTRAN
cell quality that UE uses to judge
event 3a. The range and unit of
the parameter relate to the
UTRAN Cell
and Service
Related
Handover Control -24..0, step 1 dB
This parameter is used when
judging the quality of the UTRAN
system in inter-RAT
measurement, which indicates
the weight of the best cell in the
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
absolute threshold used when
judging the quality of other RAT
configured for event 3a/3b/3c.
The value range and unit of this
UTRAN Cell
and Service
Related
Handover Control -140..-44, step 1 dBm
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control
0, 0.5..7.5, step
0.5
dB
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates Object
ID of Inter-rat event
measurement configuration for
CPICH RSCP (EUTRAN).
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the intra-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
UE executes inter-RAT
measurement on L1 in the fixed
cycle (measure several points in
one measurement cycle and L1
filters the measurement results.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates how
many events are required to be
configured for the set of the
measurement parameters for a
certain purpose. The defined
UTRAN Cell
and Service
Related
Handover Control 1..4 N/A
This parameter indicates the
event triggered by the inter-RAT
measurement, which is related to
the measurement quantity.
MAX_RAT_MEAS_EVENT
UTRAN Cell
and Service
Related
Handover Control
0: 3a
1: 3b
2: 3c
3: 3d
N/A
This parameter indicates the
absolute threshold of the UTRAN
cell quality that UE uses to judge
event 3a. The range and unit of
the parameter relate to the
UTRAN Cell
and Service
Related
Handover Control -115..-25, step 1 dBm
This parameter is used when
judging the quality of the UTRAN
system in inter-RAT
measurement, which indicates
the weight of the best cell in the
UTRAN Cell
and Service
Related
Handover Control 0.0..2.0, step 0.1 N/A
This parameter indicates the
absolute threshold used when
judging the quality of other RAT
configured for event 3a/3b/3c.
The value range and unit of this
UTRAN Cell
and Service
Related
Handover Control -140..-44, step 1 dBm
This parameter indicates the
hysteresis used when judging
whether to trigger the event. This
parameter makes it different
between the status to trigger an
UTRAN Cell
and Service
Related
Handover Control
0, 0.5..7.5, step
0.5
dB
This parameter indicates the
time difference between having
detected the event generation
and reporting the event. Only
when the event generation is
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 10
2: 20
3: 40
4: 60
ms
This parameter indicates Object
ID of Inter-rat event
measurement configuration
unrelated to traffic category.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates Object
ID of Inter-rat period
measurement configuration for
CPICH EcNo.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the intra-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
UE executes inter-RAT
measurement on L1 in the fixed
cycle (measure several points in
one measurement cycle and L1
filters the measurement results.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
UE executes inter-RAT
measurement on L1 in the fixed
cycle (measure several points in
one measurement cycle and L1
filters the measurement results.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates the
times of the periodical reports to
be reported. If the UE detects
that the times of event reports
exceeds the value of Amount of
UTRAN Cell
and Service
Related
Handover Control
0: 1
1: 2
2: 4
3: 8
4: 16
N/A
This parameter indicates the
interval of periodical reporting
when such reporting is triggered
periodically.
UTRAN Cell
and Service
Related
Handover Control
1: 250
2: 500
3: 1000
4: 2000
5: 3000
ms
This parameter indicates Object
ID of Inter-rat period
measurement configuration for
CPICH RSCP.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
filtering factor that UE performs
the L3 filtering on the
measurement results of the intra-
frequency measurement.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
UE executes inter-RAT
measurement on L1 in the fixed
cycle (measure several points in
one measurement cycle and L1
filters the measurement results.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
UE executes inter-RAT
measurement on L1 in the fixed
cycle (measure several points in
one measurement cycle and L1
filters the measurement results.
UTRAN Cell
and Service
Related
Handover Control
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates the
times of the periodical reports to
be reported. If the UE detects
that the times of event reports
exceeds the value of Amount of
UTRAN Cell
and Service
Related
Handover Control
0: 1
1: 2
2: 4
3: 8
4: 16
N/A
This parameter indicates the
interval of periodical reporting
when such reporting is triggered
periodically.
UTRAN Cell
and Service
Related
Handover Control
1: 250
2: 500
3: 1000
4: 2000
5: 3000
ms
NodeB Common Measurement
Profile Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
Profile Id RNC
Basic Identification
Parameter
0..9 N/A
this parameter indicates the
Initial Load Scene
RNC
Basic Identification
Parameter
0: Normal Load
Cell
1: High Load Cell
N/A
NodeB Common Measurement
Configuration Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
usage, function etc. of the
configuration parameters
indicated by the Node B common
measurement configuration
UTRAN Cell
NodeB
Management
0: Period Report
Parameters for
RTWP
1: Period Report
Parameters for
N/A
This parameter indicates on
which type of object that the
measurement shall be
performed, which can be cell or
RACH.
UTRAN Cell
NodeB
Management
1: Cell N/A
This parameter indicates which
type of measurement that shall
be performed by Node B.
UTRAN Cell
NodeB
Management
0: Received Total
Wide Band Power
1: Transmitted
Carrier Power
6: UTRAN GPS
N/A
This parameter indicates the
measurement filter coefficient,
which determines the amount of
filtering to be applied for
measurements.
UTRAN Cell
NodeB
Management
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates the
report characteristics of how the
reporting shall be performed by
Node B.
UTRAN Cell
NodeB
Management
2: Periodic
9: On Modification
N/A
This parameter indicates the
choice report periodicity scale,
which and the report period
together determine the frequency
with which the Node B shall send
UTRAN Cell
NodeB
Management
1: ms
2: min
N/A
This parameter indicates the
report period, which and the
choice report periodicity scale
together determine the frequency
with which the Node B shall send
UTRAN Cell
NodeB
Management
{rptPrdUnit==1}
[10..60000], step
10
{rptPrdUnit==2}
[1..60], step 1
ms or min
The TUTRAN-GPS change limit
and the predicted TUTRAN-GPS
deviation limit together define the
related thresholds for UTRAN
GPS timing of cell frames for UE
UTRAN Cell Location
0.0625..16, step
0.0625
chips
The TUTRAN-GPS change limit
and the predicted TUTRAN-GPS
deviation limit together define the
related thresholds for UTRAN
GPS timing of cell frames for UE
UTRAN Cell Location
0.0625..16, step
0.0625
chips
This parameter indicates the
accuracy class of the UTRAN
GPS timing of cell frames for UE
positioning measurement
UTRAN Cell Location
0: Accuracy Class
A
1: Accuracy Class
B
2: Accuracy Class
N/A
This parameter indicates the Id
of the dedicated measurement
Profile.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
NodeB Dedicated Measurement
Profile Object ID.
RNC
Basic Identification
Parameter
0..9 N/A
This parameter indicates the
NodeB Dedicated Measurement
Configuration Object ID.
RNC
Basic Identification
Parameter
0..2147483647 N/A
This parameter indicates the
function, purpose etc. of the
dedicated measurement
parameters indicated by the
configuration index.
RNC
Power Control,
Location
0: Period Report
Parameters for
TCP in Power
Balance
1: Period Report
N/A
This parameter indicates the type
of dedicated measurement to be
executed by Node B
RNC
Power Control, AMR
& WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control
1: SIR Error
2: Transmitted
Code Power
5: Round Trip
Time
N/A
This parameter indicates how
filtering of the measurement
values shall be performed before
measurement event evaluation
and reporting.
RNC
Power Control, AMR
& WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control,
0: 0
1: 1
2: 2
3: 3
4: 4
N/A
This parameter indicates the
report characteristics of
measurement results, which can
be on demand, periodic or by
triggering all kinds of: events.
RNC
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control,
Location
1: On Demand
2: Periodic
3: Event A
4: Event B
5: Event C
N/A
This parameter indicates the
threshold 1 used for triggering
event E, F for SIR Error
measurement.
RNC Power Control -31..31, step 0.5 dB
This parameter indicates the
downlink rate level threshold, In
D-TCP based PS DRBC, the
thresholds of D-TCP
measurement event A/B are got
RNC
Dynamic Radio
Bearer Control
1..65535, step 1 kbps
This parameter indicates the
power offset of the DPCH
maximum DL power, which
defines which threshold that shall
trigger event A, B for transmitted
RNC
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control
-50..0, step 0.1 dB
This parameter indicates the
threshold 2 used for triggering
event E, F for SIR Error
measurement.
RNC Power Control -31..31, step 0.5 dB
For event A/B/E/F, this
parameter is measurement
hysteresis time and the
measurement hysteresis time
provides the duration during
RNC
AMR & WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control
10..60000, step 10 ms
This parameter indicates the
report period unit applied by
Node B for measurement result
reporting.
RNC
Power Control, AMR
& WB-AMR,
Dynamic Radio
Bearer Control,
Handover Control,
1: ms
2: min
N/A
This parameter indicates the
frequence of measurement
report transmitted by Node B.
RNC
Power Control,
Location
{rptPrdUnit==1}
[10..60000], step
10
{rptPrdUnit==2}
[1..60], step 1
ms
External ENodeB Function
Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
The parameter is the eNodeB
No. that EUtran cell belongs to. It
can be Macro eNodeB or Home
eNodeB.
EUtran
Neighboring
Cell
Basic Identification
Parameter
0..268435455 N/A
The parameter is the eNodeB
type that EUtran cell belongs to.
It can be Macro eNodeB or
Home eNodeB.
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter
0: Macro eNodeB
1: Home eNodeB
N/A
The parameter is the RNC
identity that EUtran cell belongs
to.
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter
0..4095 N/A
This parameter indicates
External EUTRAN Cell FDD
Object ID.
RNC
Basic Identification
Parameter
0..999999999999 N/A
The parameter is used to identify
a Eutran physical cell. There are
504 unique physical-layer cell
identities. The physical-layer cell
identities are grouped into 168
EUTRAN
Neighboring
Cell
Basic Identification
Parameter
0..503 N/A
The number of PLMN shared by
CELL
RNC RAN SHARING 1 N/A
MCC uniquely identifies the
country that the UE users (or
system) belong to. MCC is
allocated uniformly and
internationally.
RNC
Basic Identification
Parameter
0..999 N/A
MNC identifies a specific PLMN
inside one country (decided by
MCC).
RNC
Basic Identification
Parameter
0..999 N/A
This parameter indicates the
code length of the MNC BCD of
the neighboring EUtran cell.
EUtran
Neighboring
Cell
Basic Identification
Parameter
2, 3 N/A
The parameter indicates
EUTRAN cell identity. It
identifies a neighboring
EUTRAN cell uniquely.
EUTRAN
Neighboring
Cell
Basic Identification
Parameter
0..255 N/A
This parameter indicates the
frequency band of the Eutran
cells.
EUTRAN
Neighboring
Cell
Handover Control
0: Band 1;
1: Band 2;
2: Band 3;
3: Band 4;
4: Band 5;
N/A
The parameter indicates the
downlink E-UTRA Absolute
Radio Frequency Channel
Number (EARFCN). F_DL is
center carrier frequency,
EUTRAN
Neighboring
Cell
Handover Control
{eutranFreqBandIn
d==0} [0..599],
{eutranFreqBandIn
d==1} [600..1199],
{eutranFreqBandIn
N/A
The parameter indicates the
uplink E-UTRA Absolute Radio
Frequency Channel Number.
EUTRAN
Neighboring
Cell
Handover Control
{eutranFreqBandIn
d==0}
[18000..18599],
{eutranFreqBandIn
d==1}
N/A
This parameter indicates the
TAC of the neighboring EUtran
cell.
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter
0..65535 N/A
This parameter indicates the
maximum allowed measurement
bandwidth on a carrier
frequency.
EUTRAN
Neighboring
Cell
Handover Control
0: 6
1: 15
2: 25
3: 50
4: 75
N/A
The parameter is the LAC that
EUtran cell belongs to.
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter
0..65533, 65535 N/A
The parameter is the RAC that
EUtran cell belongs to.
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter
0..255 N/A
This parameter indicates the
downlink overload threshold in
Eutran system.
Eutran
Neighboring
Cell
Handover Control 1..100, step 1 %
This parameter indicates the
uplink overload threshold in
Eutran system.
Eutran
Neighboring
Cell
Handover Control 1..100, step 1 %
This parameter indicates
External EUTRAN Cell TDD
Object ID.
RNC
Basic Identification
Parameter
0..999999999999 N/A
The parameter is used to
identify a Eutran physical cell.
There are 504 unique physical-
layer cell identities. The physical-
layer cell identities are grouped
EUTRAN
Neighboring
Cell
Basic Identification
Parameter
0..503 N/A
The number of PLMN shared by
CELL
RNC RAN SHARING 1 N/A
MCC uniquely identifies the
country that the UE users (or
system) belong to. MCC is
allocated uniformly and
internationally.
RNC
Basic Identification
Parameter
0..999 N/A
MNC identifies a specific PLMN
inside one country (decided by
MCC).
RNC
Basic Identification
Parameter
0..999 N/A
This parameter indicates the
code length of the MNC BCD of
the neighboring EUtran cell.
EUtran
Neighboring
Cell
Basic Identification
Parameter
2, 3 N/A
The parameter indicates
EUTRAN cell identity. It
identifies a neighboring
EUTRAN cell uniquely.
EUTRAN
Neighboring
Cell
Basic Identification
Parameter
0..255 N/A
This parameter indicates the
frequency band of the Eutran
cells.
EUTRAN
Neighboring
Cell
Handover Control
0: Band 1;
1: Band 2;
2: Band 3;
3: Band 4;
4: Band 5;
N/A
The parameter indicates the
downlink E-UTRA Absolute
Radio Frequency Channel
Number (EARFCN). F_DL is
center carrier frequency,
EUTRAN
Neighboring
Cell
Handover Control
{eutranFreqBandIn
d==32}
[36000..36199],
{eutranFreqBandIn
d==33}
N/A
This parameter indicates the
TAC of the neighboring EUtran
cell.
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter
0..65535 N/A
This parameter indicates the
maximum allowed measurement
bandwidth on a carrier
frequency.
EUTRAN
Neighboring
Cell
Handover Control
0: 6
1: 15
2: 25
3: 50
4: 75
N/A
The parameter is the LAC that
EUtran cell belongs to.
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter
0..65533, 65535 N/A
The parameter is the RAC that
EUtran cell belongs to.
EUtran
Neighboring
Cell
Adjacent EUTRAN
cell Basic
Parameter
0..255 N/A
This parameter indicates the
downlink overload threshold in
Eutran system.
Eutran
Neighboring
Cell
Handover Control 1..100, step 1 %
This parameter indicates the
uplink overload threshold in
Eutran system.
Eutran
Neighboring
Cell
Handover Control 1..100, step 1 %
External RNC Function Object ID RNC
Basic Identification
Parameter
0..2147483647 N/A
MCC uniquely identifies the
country that the UE users (or
system) belong to. MCC is
allocated uniformly and
internationally.
RNC
Basic Identification
Parameter
0..999 N/A
MNC identifies a specific PLMN
inside one country (decided by
MCC).
RNC
Basic Identification
Parameter
0..999 N/A
The parameter is the adjacent
RNC identity.
RNC
Basic Identification
Parameter
0..4095 N/A
This parameter indicates the
sharing MCC of the neighboring
RNC locates.
RNC and
PLMN
Inter_RNC
Adjencent cell
Basic Parameter
0..999 N/A
This parameter indicates the
sharing MNC of the neighboring
RNC locates.
RNC and
PLMN
Inter_RNC
Adjencent cell
Basic Parameter
0..999 N/A
This parameter indicates
reference to UIurLink object.
RNC
Basic Identification
Parameter
N/A N/A
This parameter defines the
neighboring cell diversity
combination indicator when the
current RNC is SRNC.
NE Office
Inter_RNC
Adjencent cell
Basic Parameter
0: May
1: Must
2: Must not
N/A
This parameter defines the
neighboring cell diversity
combination indicator when the
current RNC is DRNC.
NE Office
Inter_RNC
Adjencent cell
Basic Parameter
0: Combined
1: Not Combined N/A
This parameter indicates
External UTRAN Cell Object ID.
RNC
Basic Identification
Parameter
0..999999999999 N/A
The parameter indicates the
neighboring cell identity, which
is valid only in the RNC where
the cell locates.
RNC
Inter_RNC
Adjencent cell
Basic Parameter
0..65535 N/A
MCC uniquely identifies the
country that the UE users (or
system) belong to. MCC is
allocated uniformly and
internationally.
UTRAN Cell
Basic Identification
Parameter
0..999 N/A
MNC identifies a specific PLMN
inside one country (decided by
MCC).
RNC RAN Sharing 0..999 N/A
This parameter indicates the
RNC ID of the neighboring cell.
RNC ID is distributed uniformly
in PLMN.
External
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
0..4095 N/A
Cell Mode
External
UTRAN Cell
N/A 1: FDD Mode N/A
This parameter indicates the
LAC of the neighboring cell.
This parameter is to confirm the
location of the MS. The
coverage areas of each PLMN
RNC Handover Control 1..65533, 65535 N/A
This parameter indicates routing
area code of the neighboring
cell. It is only valid when
supporting PS services. The
routing area code identifies one
External
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
0..255 N/A
This parameter indicates the
HCS priority level (0-7) for the
GSM cells. 7 is the highest
priority, 0 is the lowest priority.
External
UTRAN Cell
Idle Mode and
Common Channel
Behavior
/Handover Control
0..7 N/A
This parameter is the maximum
allowed RACH transmit power of
the neighboring cell.
RNC
Idle Mode and
Common Channel
Behavior
-50..33, Step 1 dBm
This parameter indicates the
minimum required received
power level of the cell which
satisfies the condition of being
selected or reselected by UE.
External
UTRAN Cell
Idle Mode and
Common Channel
Behavior
-115..-25, step 2 dBm
This parameter is the Qrxlevmin
increment in SIB11. If present,
the actual value of Qrxlevmin =
Qrxlevmin + DeltaQrxlevmin
External
UTRAN Cell
Idle Mode and
Common Channel
Behavior
-4..-2, step 2 dB
This parameter indicates the
frequency band of the central
frequency of the neighboring cell.
RNC
Inter_RNC
Adjencent cell
Basic Parameter
0: Band I
1: Band II
2: Band III
4: Band V
5: Band VI
N/A
This parameter indicates the
occupied uplink carrier central
frequency point of the cell. It is
UTRA absolute radio frequency
channel No., corresponding to
External
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
{freqBandInd==0}
[9612..9888],
{freqBandInd==1}
[9262..9538][12][3
7][62][87][112][137
N/A
This parameter indicates the
occupied downlink carrier
central frequency point of the
cell. It is UTRA absolute radio
frequency channel No.,
RNC
Inter_RNC
Adjencent cell
Basic Parameter
{freqBandInd==0}
[10562..10838],
{freqBandInd==1}
[9662..9938][412][
437][462][487][512
N/A
The cell primary scrambling
code is used to distinguish the
cell. There are 512 downlink
primary scrambling codes in
UTRAN totally.
External
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
0..511, Step 1 N/A
This parameter indicates
PCPICH transmission power of
the neighboring cell. It is an
absolute value.
RNC Handover Control -10..50, step 0.1 dBm
This parameter indicates the
minimum required quality level
of the cell which satisfies the
condition of being selected or
reselected by UE. When the
External
UTRAN Cell
Idle Mode and
Common Channel
Behavior
-24..0, Step 1 dB
This parameter indicates if the
transmit diversity is active in the
neighboring cell. It is decided by
PSCH/SSCH TSTD indicator,
PCPICH STTD indicator and
External
UTRAN Cell
HSUPA Packet
Scheduling
0: Inactive
1: Active N/A
This parameter indicates
whether STTD can be used on
the downlink DPCH of the cell.
External
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
0: Supported
1: Not Supported N/A
This parameter indicates if the
neighboring cell supports
Closed Loop Mode1.
RNC
Inter_RNC
Adjencent cell
Basic Parameter
0: Supported
1: Not Supported N/A
This parameter indicates the
code length of the MNC BCD of
the neighboring UTRAN cell..
External
UTRAN Cell
Handover Control 2, 3 N/A
MCC uniquely identifies the
country that the UE users (or
system) belong to. MCC is
allocated uniformly and
internationally.
RNC RAN Sharing 0..999 N/A
the MNC for the shared operator
of CELL
RNC RAN Sharing 0..999 N/A
This parameter indicates the
code length of the MNC BCD of
the neighboring UTRAN cell..
External
UTRAN Cell
Handover Control 2, 3 N/A
This parameter indicates the CS
+ PS domain service area code
of the neighboring cell. Service
area code uniquely identifies
one or several cells belonging to
External
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
0..65535 N/A
This parameter indicates the
UTRAN registration area ID.
One cell can belong to at most
four URAs. Different UEs that
reside in this cell can belong to
External
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
N/A N/A
This parameter indicates the
number of shared network area
code that the neighboring cell
belongs to.
External
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
0..4 N/A
This parameter indicates the
shared network area code that
the neighboring cell belongs to.
One cell can belong to at most
four SNACs (shared network
External
UTRAN Cell
Handover Control 0..65535 N/A
This parameter indicates the
supporting type of DCH, HSDPA
and HSUPA of the neighboring
cell.
RNC
Handover Control /
Load Balance
/Admission Control
/HSDPA
Introduction ,
0: Not Support
HSUPA and
HSDPA
1: Support
HSDPA and DCH
N/A
This parameter indicates
whether the neighboring cell
supports F-DPCH.
RNC
Inter_RNC
Adjencent cell
Basic Parameter
0: Supported
1: Not Supported N/A
This parameter indicates
whether the neighboring cell
supports Enhanced F-DPCH.
UTRAN Cell HSPA Evolution
0: Supported
1: Not Supported N/A
This parameter indicates
whether the neighboring cell
supports MIMO or not.
RNC Handover Control
0: Not Supported
1: Supported
N/A
This parameter indicates
whether the neighboring cell
supports to activate MIMO and
downlink 64QAM at the same
time.
RNC HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates
whether the neighboring cell
supports downlink 64QAM or not.
RNC
Inter_RNC
Adjencent cell
Basic Parameter
0: Not Supported
1: Supported
N/A
This parameter indicates
whether the adjacent cell
supports the Uplink Enhanced
Layer 2 function or not.
External
UTRAN Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates
whether the neighboring cell
supports flexible MAC-d PDU
size or not.
RNC
Inter_RNC
Adjencent cell
Basic Parameter
0: Not Supported
1: Supported
N/A
This parameter indicate whether
Dual-Cell HS-DSCH is
supported for the neighbor cell
over Iur.
External
UTRAN Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter describes the
Possible Secondary Serving Cell
ID for the neighbor cell over Iur.
External
UTRAN Cell
HSPA Evolution 0..65535 N/A
This parameter indicates
whether PCPICH transmission
power is configured.
PCPICH transmission power is
valid when this parameter is set
External
UTRAN Cell
Handover Control
0: False
1: True
N/A
Cell description type, which
indicates the type to describe
the cell, can be type of "polygon"
or "arch" , or "cell center + cell
radius" . When RNC receives
External
UTRAN Cell
Location Service
0: Center Point
with Altitude and
Cell Radius
1: Polygon
2: Arc
N/A
This parameter identifies how
many points should be included
in the polygon of the cell. If the
cell is described in type of
"polygon" , the best number of
External
UTRAN Cell
Location Service 3..15 N/A
This parameter indicates the
latitude direction of the polygon
point. When RNC receives the
message of RANAP LOCATION
REQUEST from CN, which
External
UTRAN Cell
Location Service
0: North
1: South
N/A
This parameter indicates the
absolute value of the polygon
point latitude. When RNC
receives the message of
RANAP LOCATION REQUEST
External
UTRAN Cell
Location Service 0..90, step 1 s
This parameter indicates the
value of the polygon point
longitude. When RNC receives
the message of RANAP
LOCATION REQUEST from CN,
External
UTRAN Cell
Location Service
-180..180, step
0.00001
s
This parameter indicates the
latitude direction of the cell
center. This parameter is one of
the parameters to describe the
cell in type of "cell central point"
External
UTRAN Cell
Location Service
0: North
1: South
N/A
This parameter indicates the
absolute value of the latitude
degree for the cell center. This
parameter is one of the
parameters to describe the cell
External
UTRAN Cell
Location Service
0..90, step
0.00001
s
This parameter indicates the
value of the longitude degree for
the cell center. This parameter
is one of the parameters to
describe the cell in type of "cell
External
UTRAN Cell
Location Service
-180..180, step
0.00001
s
This parameter is one of the
parameters to describe the cell
in type of "cell central point" .It
indicates the altitude for the cell
center.
External
UTRAN Cell
Location Service 0..32767, Step 1 m
This parameter indicates the
altitude direction of the polygon
point. When RNC receives the
message of RANAP LOCATION
REQUEST from CN, which
External
UTRAN Cell
Location Service
0: Height
1: Depth
N/A
This parameter is one of the
parameters to describe the cell
in type of "cell center + cell
radius" , indicating the altitude
accuracy.
External
UTRAN Cell
Location Service 0..990, Step 1 m
Altitude accuracy Code of cell
UTRAN Cell
Related
Location service 0..127 N/A
This parameter is one of the
parameters to describe the cell
in type of "cell center + cell
radius" , indicating the
confidence of the position
External
UTRAN Cell
Location Service 0..100, Step 1 %
This parameter is one of the
parameters to describe the cell
in type of "cell center + cell
radius" , indicating the cell
radius. It takes the cell center
External
UTRAN Cell
Location Service 0..1806627, Step 1 m
When UE maitain in a cell and
RNC report cell the UE's
Location based on CELLID
position method, this parameter
indicates the horizontal accuracy
UTRAN Cell
Related
Location service 0..127 N/A
This parameter indicates the
type of the transmission antenna
in the cell
External
UTRAN Cell
Location Service
0: Omni Antenna
1: Beam Antenna N/A
This parameter indicates the
latitude direction of the
transmission antenna is south or
north.
External
UTRAN Cell
Location Service
0: North
1: South
N/A
This parameter indicates the
geographical latitude
coordinates of the transmission
antenna in the cell.
External
UTRAN Cell
Location Service
0..90, step
0.00001
s
This parameter indicates the
longitude of the transmission
antenna in the cell
External
UTRAN Cell
Location Service
-180..180, step
0.00001
s
This parameter indicates the
altitude of the transmission
antenna in the cell.
External
UTRAN Cell
Location Service 0..32767, Step 1 m
Direction of Antenna Altitude.
This parameter indicates the
altitude of the transmission
antenna of the cell is above or
below the level.
External
UTRAN Cell
Location Service
0: Height
1: Depth N/A
This parameter indicates the
offset angle of the transmission
antenna in the cell.
External
UTRAN Cell
Location Service 0..360, Step 1
This parameter indicates the
inner angel of the transmission
antenna of the cell.
External
UTRAN Cell
Location Service 0..360, Step 1
This parameter indicates
whether establishing traffic CS
64 kbps in External UTRAN Cell
is allowed or not. If this switch is
"Off", it is invalid for traffic CS 64
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
0: Off
1: On
N/A
This parameter indicates
whether DeltaQrxlevmin in
SIB11 is configured.
External
UTRAN Cell
Idle Mode and
Common Channel
Behavior
0: False
1: True
N/A
This parameter indicates if the
neighboring cell supports
TUTRAN-GPS common
measurement.
External
UTRAN Cell
Parameter for
future use
0: Not Supported
1: Supported
N/A
This parameter indicates if the
External UTRAN cell supports
HS-DSCH congestion detection.
External
UTRAN Cell
Overbooking on Iux
0: Not Supported
1: Supported
N/A
This parameter indicates if the
External UTRAN cell supports E-
DCH congestion detection.
External
UTRAN Cell
HSUPA Packet
Scheduling
0: Not Supported
1: Supported
N/A
This parameter indicates if the
neighboring cell supports E-
DCH TTI 2ms.
External
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
0: Not Supported
1: Supported
N/A
This parameter indicates the E-
DCH SF capability of the
neighboring cell.
External
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
0: SF8
1: SF4
2: 2SF4
3: 2SF2
4: 2SF2 and 2SF4
N/A
The parameter indicates the E-
DCH HARQ combining
capability of the neighboring cell.
External
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
0: IR Combining
Capable
1: Combining
Capable
2: IR and Chase
N/A
This parameter indicates the
maximum UE DTX cycle
supported by the neighboring
cell for continuous packet
connectivity DTX-DRX operation.
RNC HSPA Evolution
0: 5
1: 10
2: 20
3: 40
4: 64
N/A
This parameter indicates
whether continuous packet
connectivity DTX-DRX operation
is supported by the neighboring
cell or not.
NE Office HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates
whether continuous packet
connectivity HS-SCCH less
operation is supported by the
neighboring cell or not.
NE Office HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates the
minimum required quality level
of the cell which satisfies the
condition of being selected or
reselected by UE. When the
External
UTRAN Cell
Idle Mode and
Common Channel
Behavior
-24..0, Step 1 dB
This parameter indicates the
minimum required received
power level of the cell which
satisfies the condition of being
selected or reselected by UE.
External
UTRAN Cell
Idle Mode and
Common Channel
Behavior
-115..-25, step 2 dBm
This parameter indicates
whether DeltaQrxlevmin in
SIB12 is configured.
External
UTRAN Cell
Idle Mode and
Common Channel
Behavior
0: False
1: True
N/A
This parameter is the Qrxlevmin
increment in SIB12.If present,
the actual value of Qrxlevmin =
Qrxlevmin + DeltaQrxlevmin.
External
UTRAN Cell
Idle Mode and
Common Channel
Behavior
-4..-2, step 2 dB
This parameter indicates the
transport time delay between the
rnc and the adjacent cell.There
are three time delay levels:
20ms (Low Earth Orbit and
External
UTRAN Cell
RAN Transmission
Overview/Handover
Control
0: 20ms
1: 100ms
2: 400ms
N/A
This parameter indicates the
transport delay jitter between the
RNC and the adjacent cell. The
value of FP TOAWS is related
with the parameter.
External
UTRAN Cell
RAN Transmission
Overview
0..100, Step 1 ms
This parameter indicates the
maximum bit rate on DL DCH
allowed in External UTRAN cell
for an NRT PS domain RAB.
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,
144, 256, 384
kbps
This parameter indicates the
maximum bit rate on UL DCH
allowed in External UTRAN cell
for an NRT PS domain RAB.
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,
144, 256, 384
kbps
This parameter indicates the
maximum bit rate on DL DCH
allowed in External UTRAN Cell
for an RT PS domain RAB.
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,
144, 256, 384
kbps
This parameter indicates the
maximum bit rate on UL DCH
allowed in External UTRAN Cell
for an RT PS domain RAB.
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,
144, 256, 384
kbps
This parameter indicates the
maximum bit rate on UL E-DCH
allowed in External UTRAN Cell
for an NRT PS domain RAB.
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,
144, 256, 384,
512, 711, 1024,
1399, 1448, 2048,
2886, 3072, 4096,
kbps
This parameter indicates the
maximum bit rate on UL E-DCH
allowed in External UTRAN Cell
for an RT PS domain RAB.
UTRAN Cell
and PLMN
Dynamic Radio
Bearer Control
/Handover Control
8, 16, 32, 64, 128,
144, 256, 384,
512, 711, 1024,
1399, 1448, 2048,
2886, 3072, 4096,
kbps
This parameter indicates
whether the neighbouring cell of
DRNC supports to activate Dual
Cell and MIMO at the same time.
External
UTRAN Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A
Reserved Parameter 1 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..255 N/A
Reserved Parameter 2 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..255 N/A
Reserved Parameter 4 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..255 N/A
Reserved Parameter 4 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..255 N/A
Reserved Parameter 5 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..255 N/A
Reserved Parameter 6 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..65535 N/A
Reserved Parameter 7 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..65535 N/A
Reserved Parameter 8 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..65535 N/A
Reserved Parameter 9 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..65535 N/A
Reserved Parameter 10 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..65535 N/A
Reserved Parameter 11 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..65535 N/A
Reserved Parameter 12 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..65535 N/A
Reserved Parameter 13 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..65535 N/A
Reserved Parameter 14 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..65535 N/A
Reserved Parameter 15 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..65535 N/A
Reserved Parameter 16 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..4294967295 N/A
Reserved Parameter 17 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..4294967295 N/A
Reserved Parameter 18 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..4294967295 N/A
Reserved Parameter 19 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..4294967295 N/A
Reserved Parameter 20 for
External UTRAN Cell
External
UTRAN Cell
parameter for
future use
0..4294967295 N/A
This parameter indicates
whether the neighboring cell
supports uplink 16QAM or not.
External
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
0: Not Supported
1: Supported
N/A
This parameter indicates
whether the neighboring cell
supports E-DPCCH power
boosting or not.
External
UTRAN Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates
whether Precoding Weight Set
Restriction is supported by the
neighbouring cell of the DRNC.
Supporting Precoding Weight
UTRAN Cell
Inter_RNC
Adjencent cell
Basic Parameter
0: Not Supported
1: Supported
N/A
This parameter indicates the
geographical area report type of
the cell.when CN requires RNC
to report the location result with
the type of Geographical Area
External
UTRAN Cell
Location Service
0: Ellipsoid Point
1: Ellipsoid Point
with Uncertainty
Circle
2: Ellipsoid Point
N/A
This parameter identifies
whether the local cell is the
designated zone or not.
External
UTRAN Cell
Location Service
0: False
1: True
N/A
This parameter indicates
whether DB DC-HSDPA is
supported by the cell under
DRNC.
UTRAN Cell HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates the
number of DB Secondary
Serving Cell for the neighbor cell
over Iur.
External
UTRAN Cell
Load Balance 1..4 N/A
This parameter describes the
DB Secondary Serving Cell ID
for the neighbor cell over Iur.
MAX_NUM_DB_SECOND_CEL
L indicates the number of DB
External
UTRAN Cell
Load Balance 0..65535 N/A
This parameter indicates that
the adjacent RNC cell and the
serving cell in this RNC
represent the same physical cell
in the same NodeB, the two
External
UTRAN Cell
Node B
Management
0..65535 N/A
When the cell supports HSDPA ,
this parameter is used to
activate RAB
setup/configuration/handover on
HSDPA channel.Modification of
UtranCell
Admission
Control/HSDPA
Introduction
0: Inactive
1: Active
N/A
Number of SF=16 Used in HS-
PDSCH
External
UTRAN Cell
N/A 1..15 N/A
Number of SF=128 Used in HS-
SCCH
External
UTRAN Cell
N/A 1..32 N/A
This parameter indicate whether
the DRNC cell can active the
STTD of downlink control
channel (HS-SCCH, F-DPCH, E-
AGCH, E-HICH, E-RGCH) when
External
UTRAN Cell
HSPA Evolution
0: Not Supported
1: Supported
N/A
This parameter indicates
whether DC-HSUPA is
supported by the cell under
DRNC.
UTRAN Cell DRBC
0: Not Supported
1: Supported
N/A
This parameter indicates the
separate Iur transport bearer
mode whether to be supported.
If its value is "1: Supported" , the
Mac-d flows from each carrier
UTRAN Cell DRBC
0: Not Supported
1: Supported
N/A
This parameter indicates the E-
DCH UL Flow Multiplexing
whether to be supported.
If its value is "1: Supported" , the
Mac-d flows received on the
UTRAN Cell DRBC
0: Not Supported
1: Supported
N/A
External GSM Cell Object ID RNC
Basic Identification
Parameter
0..999999999999 N/A
This parameter is neighboring
cell identity, it is valid only in the
LAC where the cell locates.
UTRAN Cell
Adjacent Gsm cell
Basic Parameter
0..65535 N/A
This parameter indicates BCCH
absolute radio frequency
channel No. of GSM neighboring
cell, which corresponds to the
central frequency of the carrier
RNC
Adjacent Gsm cell
Basic Parameter
{bandIndicator==0
} [512..885],
{bandIndicator==1
} [512..812],
{bandIndicator==2
N/A
When the neighboring cell is
GSM cell, its BSIC (Base
transceiver Station Identity
Code) consists of NCC (Network
Colour Code) and BCC (Base
RNC and
PLMN
Adjacent Gsm cell
Basic Parameter
0..7 N/A
When the neighboring cell is
GSM cell, its BSIC (Base
transceiver Station Identity
Code) consists of NCC (Network
Colour Code) and BCC (Base
RNC and
PLMN
Adjacent Gsm cell
Basic Parameter
0..7 N/A
This parameter indicates the
LAC of the neighboring cell
locates. It identifies different
location area. LAC belongs to
LAI (LAI = MCC + MNC + LAC).
UTRAN Cell
Adjacent Gsm cell
Basic Parameter
1..65533, 65535 N/A
MCC uniquely identifies the
country that the UE users (or
system) belong to. MCC is
allocated uniformly and
internationally.
UTRAN Cell
Adjacent Gsm cell
Basic Parameter
0..999 N/A
This parameter indicates the
LAC of the neighboring cell
locates. It identifies different
location area. LAC belongs to
LAI (LAI = MCC + MNC + LAC).
UTRAN Cell
Adjacent Gsm cell
Basic Parameter
0..999 N/A
The parameter indicates RAC of
the Gsm cell.
RNC
Adjacent Gsm cell
Basic Parameter
0..255 N/A
Routing Area Colour Code
external Gsm
Cell
Adjacent Gsm cell
Basic Parameter
0..255 N/A
This parameter indicates the
code length of the MNC BCD of
the neighboring GSM cell.
UTRAN Cell
Adjacent Gsm cell
Basic Parameter
2, 3 N/A
MCC uniquely identifies the
country that the UE users (or
system) belong to. MCC is
allocated uniformly and
internationally.
UTRAN Cell
Adjacent Gsm cell
Basic Parameter
0..999 N/A
This parameter indicates the
sharing LAC of the neighboring
cell locates. It identifies different
location area. LAC belongs to
LAI (LAI = MCC + MNC + LAC).
RNC and
PLMN
Adjacent Gsm cell
Basic Parameter
0..999 N/A
This parameter indicates the
code length of the MNC BCD of
the neighboring GSM cell.
UTRAN Cell
Adjacent Gsm cell
Basic Parameter
2, 3 N/A
This parameter indicates
whether the GSM cell is GERAN
cell
UTRAN Cell Handover Control
0: Not GERAN
Cell
1: GERAN Cell
N/A
This parameter indicates BSC
Identifier, which GSM Cell
belongs to.
UTRAN Cell
Adjacent Gsm cell
Basic Parameter
0..65535 N/A
This parameter indicates the
number of shared network area
code that the neighboring cell
belongs to.
RNC
Adjacent Gsm cell
Basic Parameter
0..DBS_RR_MAX_
NUM_SNAC_PER
_GSMCEL
N/A
This parameter indicates the
shared network area code that
the neighboring cell belongs to.
One cell can belong to at most
four SNACs (shared network
RNC
Adjacent Gsm cell
Basic Parameter
0..65535 N/A
This parameter identifies which
frequency band the BCCH
ARFCN GSM neighboring cell
uses
Node B
Adjacent Gsm cell
Basic Parameter
0: DCS 1800
Band Used;
1: PCS 1900
Band Used;
2: Standard GSM
N/A
This parameter indicates the
maximum UE allowed uplink
transmit power in the GSM cell.If
the current UE uplink transmit
power is above the indicated
UTRAN Cell
Adjacent Gsm cell
Basic Parameter
-50..33, Step 1 dBm
This parameter indicates the
HCS priority level (0-7) for the
GSM cells. 7 is the highest
priority, 0 is the lowest priority.
GSM
Neighboring
Cell
Idle Mode and
Common Channel
Behavior
/Handover Control
0..7 N/A
This parameter indicates the
minimum required received
power level of the cell which
satisfies the condition of being
selected or reselected by UE.
GSM
Neighboring
Cell
Idle Mode and
Common Channel
Behavior
-115..-25, step 2 dBm
This parameter indicates
whether DeltaQrxlevmin in
SIB11 is configured.
GSM
Neighboring
Cell
Idle Mode and
Common Channel
Behavior
0: False
1: True
N/A
This parameter is the Qrxlevmin
increment in SIB11. If present,
the actual value of Qrxlevmin =
Qrxlevmin + DeltaQrxlevmin
GSM
Neighboring
Cell
Idle Mode and
Common Channel
Behavior
-4..-2, step 2 dB
This parameter indicates the
minimum required received
power level of the cell which
satisfies the condition of being
selected or reselected by UE.
GSM
Neighboring
Cell
Idle Mode and
Common Channel
Behavior
-115..-25, step 2 dBm
This parameter indicates
whether DeltaQrxlevmin in
SIB12 is configured.
GSM
Neighboring
Cell
Idle Mode and
Common Channel
Behavior
0: False
1: True
N/A
This parameter is the Qrxlevmin
increment in SIB12.If present,
the actual value of Qrxlevmin =
Qrxlevmin + DeltaQrxlevmin.
GSM
Neighboring
Cell
Idle Mode and
Common Channel
Behavior
-4..-2, step 2 dB
An offset is allocated for each
cell being monitored. The offset
can be positive or negative.
Before the UE judges whether
an event occurs, adds the offset
GSM
Neighboring
Cell
Handover Control -50..50, step 1 dB
This parameter indicates the
downlink overload threshold in
GSM system.
GSM
Neighboring
Cell
Handover Control 1..100, step 1 %
This parameter indicates the
uplink overload threshold in
GSM system.
GSM
Neighboring
Cell
Handover Control 1..100, step 1 %
This parameter indicates the
downlink overload threshold for
RT service in GSM system.
GSM
Neighboring
Cell
Handover Control 1..100, step 1 %
This parameter indicates the
uplink overload threshold in
GSM system.
GSM
Neighboring
Cell
Handover Control 1..100, step 1 %
The parameter indicates
whether the cell is indoor cell or
not.
Gsm
Neighboring
Cell
Handover Control
0: False
1: True
N/A
This parameter is UTRAN Cell
Object ID
RNC
Basic Identification
Parameter
0..2147483647 N/A
Cell Identity is valid only in the
RNC where the cell locates.
UTRAN Cell
Basic Identification
Parameter
0..65534, Step 1 N/A
The local cell ID represents
resources in the Node B that
can be used for the
configuration of a cell.
UTRAN Cell
Node B
Management
0..268435455 N/A
This parameter indicates the
maximum value for the linear
sum of the power of all downlink
physical channels, which is
allowed to be used in a cell.
UTRAN Cell
Admission Control
/Node B
Management
0..50, step 0.1 dBm
This parameter indicates the
PICH transmission power, which
is an offset relative to the
Primary CPICH power.
UTRAN Cell
Node B
Management,
Power Control,
Connection
Management
-10..5, step 1 dB
Cell Mode UTRAN Cell N/A 1: FDD Mode N/A
This parameter indicates
reference to ULocationArea
object.
RNC
Handover Control
/MULTIPLMN
N/A N/A
This parameter indicates
reference to URoutingArea
object.
RNC MULTIPLMN N/A N/A
This parameter indicates CS +
PS domain service area code of
the cell. Service area code
uniquely identifies one or
several cells belonging to the
UTRAN Cell
connection
management
N/A N/A
This parameter indicates
frequency band of the central
frequency of the cell.
UTRAN Cell
Node B
Management
0: Band I
1: Band II
2: Band III
3: Band IV
4: Band V
N/A
This parameter indicates the
occupied uplink carrier central
frequency point of the cell. It is
UTRA absolute radio frequency
channel No., corresponding to
UTRAN Cell
Node B
Management
{freqBandInd==0}
[9612..9888],
{freqBandInd==1}
[9262..9538][12][3
7][62][87][112][137
N/A
This parameter indicates the
occupied downlink carrier
central frequency point of the
cell. It is UTRA absolute radio
frequency channel No.,
UTRAN Cell
Node B
Management
{freqBandInd==0}
[10562..10838],
{freqBandInd==1}
[9662..9938][412][
437][462][487][512
N/A
The cell primary scrambling
code is used to distinguish the
cell. There are 512 downlink
primary scrambling codes in
UTRAN totally.
UTRAN Cell
Node B
Management /Code
allocation
0..511 N/A
This parameter indicates the
transmission power level of the
Primary CPICH (Common Pilot
Channel), which is an absolute
value.
UTRAN Cell Power Control -10..50, step 0.1 dBm
PSCH transmission power. This
parameter is the offset relative
to PCPICH power.
UTRAN Cell Power Control -35..15, step 0.1 dB
SSCH transmission power. This
parameter is the offset relative
to PCPICH power.
UTRAN Cell Power Control -35..15, step 0.1 dB
BCH transmission power. This
parameter is the offset relative
to PCPICH transmission power.
BCH is mapped one to one to
PCCPCH physical channel. In
UTRAN Cell Power Control -35..15, step 0.1 dB
This parameter indicates the
AICH transmission power, which
is an offset relative to the
Primary CPICH power.
UTRAN Cell
Node B
Management,
Power Control,
Connection
Management
-22..5, step 1 dB
This parameter indicates the
minimum required quality level
of the cell which satisfies the
condition of being selected or
reselected by UE. When the
UTRAN Cell
Idle Mode and
Common Channel
Behavior
-24..0, step 1 dB
This parameter indicates the
minimum required received
power level of the cell which
satisfies the condition of being
selected or reselected by UE.
UTRAN Cell
Idle Mode and
Common Channel
Behavior
-115..-25, step 2 dBm
This parameter indicates the
extension of Qrxlevmin, which
means Qrxlevmin = Qrxlevmin +
DeltaQrxlevmin.
UTRAN Cell
Idle Mode and
Common Channel
Behavior
-4..-2, step 2 dB
This parameter is cell reserved
indicator for operator use. When
cell status is indicated as "not
barred" and "reserved" for
operator use, If the UE is
UTRAN Cell
Idle Mode and
Common Channel
Behavior
0: Reserved
1: Not Reserved
N/A
This parameter indicates
whether STTD can be used on
the downlink DPCH of the cell.
UTRAN Cell HSPA Evolution
0: Supported
1: Not Supported N/A
This parameter indicates
whether closed loop mode1 is
supported in the cell.
UTRAN Cell Function Switch
0: Supported
1: Not Supported N/A
This parameter indicates
whether transmit diversity is
applied to the downlink common
physical channels or not.
UTRAN Cell
Node B
Management
/Connection
Management
0: Inactive
1: Active
N/A
This parameter indicates
reference to UUtranRegArea
object.
RNC
Basic Identification
Parameter
N/A N/A
An offset is allocated for each
cell being monitored. The offset
can be positive or negative.
Before the UE judges whether
an event occurs, adds the offset
UTRAN Cell Handover Control -10..10, step 0.5 dB
This parameter indicates
reference to UIubLink object.
RNC
Basic Identification
Parameter
N/A N/A
This parameter indicates the
HCS priority level (0-7) for the
GSM cells. 7 is the highest
priority, 0 is the lowest priority.
UTRAN Cell
Idle Mode and
Common Channel
Behavior / HCS
/Handover Control
0..7 N/A
This parameter indicates the
transmission power of the PCH
mapped on the SCCPCH, which
is a power offset relative to the
PCPICH power.
UTRAN Cell
Power Control
/Node B
Management
-35..15, step 0.1 dB
Address UTRAN Cell N/A 0..255 N/A
This parameter indicates the
quality threshold levels for
applying prioritised hierarchical
cell reselection, when
measurement quantity is CPICH
UTRAN Cell
Idle Mode and
Common Channel
Behavior
-24..0, step 0.5 dB
This parameter indicates the
quality threshold levels for
applying prioritised hierarchical
cell reselection, when
measurement quantity is CPICH
UTRAN Cell
Idle Mode and
Common Channel
Behavior
-115..-26, step 1 dBm
This parameter is a switch
indicating whether
DeltaQrxlevmin used for cell
reselection is configured or not.
UTRAN Cell
Idle Mode and
Common Channel
Behavior
0: False
1: True
N/A
This parameter indicates
reference to
UNbComMeasProfile object.
RNC
NodeB
Management
N/A N/A
This parameter is the DN
(Distinguish Name) of
UTrvMeasProfile.
UTRAN Cell
Dynamic Radio
Bearer Control
N/A N/A
This parameter is the DN
(Distinguish Name) of
UUeIntMeasProfile.
UTRAN Cell
Basic Identification
Parameter
N/A N/A
This parameter indicates the
timing delay used for defining
the starting time of SCH, CPICH
and the DL scrambling code (s)
in a cell relative to BFN.
UTRAN Cell
Node B
Management
0..9, step 1 256chips
This parameter indicates the
scenario of the serving cell.
UTRAN Cell Admission Control
0: Dense City
Zone
1: Generic City
Zone
2: Suburb
N/A
Indicates the service area code
for BC domain the cell is
referenced. It is required to be
configured when the cell
supports the cell broadcast
UTRAN Cell CBS N/A N/A
This parameter is the sector
identity of the cell.
UTRAN Cell
Basic Identification
Parameter
1..255 N/A
Cell description type, which
indicates the type to describe
the cell, can be type of "polygon"
or "arch" , or "cell center + cell
radius" . When RNC receives
UTRAN Cell Location Service
0: Center Point
with Altitude and
Cell Radius
1: Polygon
2: Arc
N/A
This parameter identifies how
many points should be included
in the polygon of the cell. If the
cell is described in type of
"polygon" , the best number of
UTRAN Cell Location Service 3..15 N/A
This parameter indicates the
latitude direction of the polygon
point. When RNC receives the
message of RANAP LOCATION
REQUEST from CN, which
UTRAN Cell Location Service
0: North
1: South
N/A
This parameter indicates the
absolute value of the polygon
point latitude. When RNC
receives the message of
RANAP LOCATION REQUEST
UTRAN Cell Location Service
0..90, step
0.00001