DSP S1INTERFACE: - It will tell no data users on that particular Enode B DSP SECTOR: - It will us about the sector status, tx-rx power, license status. ADD SECTOR: It will us how to add sector in Enode B. BKP CFGFILE: It will help us to take back up for particular Enode B LST SECTOR:-It will tell us about sector configuration part of three sectors. LST ESN: - It will tell us about the equipment serial number.ES is !er" useful in creation Enode B. LST VER:-It will tell us about the !ersion of the Enode B and I#s status. DSP BRDVER: It will tell us about the !ersion and status of e!er" board configured on Enode B. SET ENVALMPARA:-It will tell us how to configure $larm in %&'''. INS LICENSE: MODE=IPV4( It will us how to install )I*ESE in Enode B. LST LICENSE; It will tell that which license is running in that Enode B. ULD LICENSE:: - It will help us to upload the license file. RMV ALMFLT:; It will help us to manuall" clear the $larm from the network. LST ALMLOG: It will us to check the alarm in network for particular Enode B. DLD CFGFILE: It will us to download the back up file. RMV CFGFILE:-It will used to remo!e the backup file. MOD ENODEB: LST ENODEB: DSP ENODEB: DSP BSSTATUS: It will tell us about Enode B status. 2014-07-01 Huawei Proprietary - Restricted Distriution Pa!e1" Total2 Document Title Security Level 2014-07-01 Huawei Proprietary - Restricted Distriution Pa!e2" Total2