Está en la página 1de 96

THIS PAGE INTENTIONALLY LEFT BLANK

1000 Waconia Ave. SW Cedar Rapids, IA 52404


Phone: 319-364-5600 Fax: 319-364-6449

Fax Inquiry
To: CEMC Estimating Department
Yes, I am interested in obtaining more information about your services in the areas of:
_____ Machining

_____ Screws and Augers

_____ Fabrication

_____ Flighting

_____ Welding
Description ______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
Qty.

__________

From:
Name

_____________________________

Company

_______________________________________________________________

Address

_______________________________________________________________

City

___________________________ State ______________ Zip ____________

Phone

_________________________

Fax

Title _________________________

________________________

Would you like CEMC to update your manual periodically?

[ ] Yes

[ ] No

Conveyor Eng. & Mfg.

INTRODUCTION

Conveyor Eng. & Mfg. Co. (CEMC) would like to thank you for expressing interest in our product. We specialize in
stainless steel screw conveyors used in a variety of industries. The cornerstone of our success for over two decades in
this industry has been our ability to provide a quality product at a reasonable price in a timely manner.
Service: Our commitment to outstanding service has been the main reason for our consistent growth since 1970 as
we recently doubled our manufacturing facility to maintain this level. When it comes to service, we have one goal - to
provide the best in the industry. Absolutely no one ships hot jobs quicker. We can do this by stocking approximately 1
million pounds of stainless steel raw material and operating only one full shift in our manufacturing plant. This allows
us the flexibility to extend hours when needed and greater access to key equipment and material when hot jobs are
ordered. We have a full engineering staff on hand capable of performing simulations, finite element analysis, approval
designs, or just to answer any questions you may have.
Quality: When it comes to quality, we will put our products up against anyone in the industry. Prior to manufacturing
all conveyor designs must pass a computer stress analysis covering bolts, flights, pipe and shafts. On request, this
information can be provided at time of quotation. Our components are manufactured in-house allowing us to keep tight
reign on quality control and are checked by a full time inspector prior to shipping.
Price: Our stainless conveyors are built entirely under our roof. You will not pay multiple markups for subcontracted
parts. We handle complete manufacturing and engineering functions through our facility in Cedar Rapids. This means
that even with industry leading standards for quality and service, we can still offer very competitive prices.
References: Our customer base has grown mainly by word of mouth through satisfied customers over the years. This
has given us the opportunity to work with companies such as:
A.E. Staley Abbott Labs ADM AGP American Crystal Sugar Cargill Cerestar Con-Agra
Consolidated Paper Corn Products Domino Sugar Dow Chemical DuPont General Mills Georgia-Pacific
Grain Processing Corp. Hershey Hormel IBP Imperial Holly Sugar International Paper James River Paper
Kellogg Kraft M & M Mars Michigan Sugar Minnesota Corn Products Monfort Monsanto Nabisco
National Starch & Chem. Nestle Penford Products Ponderosa Pulp Products PPG Procter & Gamble
Quaker Oats Ralston Roquette America Southern Minn. Beet Sugar Wausau Paper Western Sugar
Weyerhaeuser
Again, thank you for the opportunity to get to know us better - we are very proud of the work we do and would like to
have an opportunity to satisfy your screw conveying needs.

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

TABLE OF CONTENTS
Engineering Section
Forward............................................................................................................................................3
Conveyor Design Steps ...................................................................................................................6
Conveying Requirements.................................................................................................................6
Material Classification .................................................................................................................7-16
Special Materials and Applications ................................................................................................17
Material Lump Size ........................................................................................................................18
Conveying Capacity .......................................................................................................................19
Conveyor Sizing and Speeds.........................................................................................................21
Horsepower Calculation............................................................................................................23-25
Conveyor Component Sizing ....................................................................................................26-27
Torsional Rating, Torque Calculation.............................................................................................28
Deflection .......................................................................................................................................29
Thermal Expansion ........................................................................................................................30
Screw Conveyor Components
Layout ............................................................................................................................................31
Screws ......................................................................................................................................32-41
Shafts .......................................................................................................................................42-45
Troughs.....................................................................................................................................46-50
Endplates ..................................................................................................................................51-56
Covers ......................................................................................................................................57-60
Hangers ....................................................................................................................................61-65
Hanger Bearings .......................................................................................................................66-67
Grease Tubes ................................................................................................................................66
Inlets ..............................................................................................................................................68
Internal Collars...............................................................................................................................69
Discharge..................................................................................................................................70-71
Flange Foot/Saddle .......................................................................................................................72
Seals.........................................................................................................................................73-75
Bearings....................................................................................................................................76-78
Clamps...........................................................................................................................................79
Gasketing / Flanges ..................................................................................................................80-81
Flange Bolt Patterns .................................................................................................................82-83
Coupling Bolts................................................................................................................................84
Shrouds .........................................................................................................................................85
Gates ........................................................................................................................................86-87
Installation and Maintenance .................................................................................................89-90
Engineering .............................................................................................................................91-94
Index ........................................................................................................................................95-96

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

ENGINEERING
The screw conveyor is one of the oldest methods of conveying materials known to mankind, the original design
dating back more than two thousand years. Since the screw conveyor came into general use a little over a century
ago for moving grains, fine coal and other bulk material of the times, it has come to occupy a unique place in a
growing area of material handling processing. Today, modern technology has made the screw conveyor one of the
most efficient and economical methods of moving bulk material.
What are the advantages of a screw conveyor?

It is compact and easily adapted to congested locations.

It can be used to control the flow of material in processing operations which depend upon accurate batching.

It is versatile and can be employed in horizontal, inclined and vertical installations.

It can be used as a mixer or agitator, to mix and blend dry or fluid ingredients,
provide crystallization or coagulant action, or maintain solutions in suspension.

It can be sealed to prevent the escape of dust or fumes from inside the conveyor or keep dust or
moisture from entering the outside the conveyor.

It can be jacketed to serve as a drier or cooler by running hot or cold water through the jacket.

It can be made out of a variety of materials to resist corrosion, abrasion or heat depending upon the
material being conveyed.

It can be outfitted with multiple discharge points.


Many years of experience in the design and practical application of screw conveyors has resulted in the refinement
of conveyor design. This design procedure, outlined in the Engineering Section of this catalog, makes it possible to
accurately calculate size, speed, and the required power with a minimum of mathematical calculations.

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

ENGINEERING
Using the following steps, in conjunction with the tables and graphs on the following pages, you will be able to
estimate the specifications for a horizontal screw conveyor. Final specifications should be established with the
assistance of our engineering department.
If your requirements present problems not covered in this catalog, we invite you to contact our Engineering
Department for recommendations and suggestions.
Conveyor Design Steps:
1. Establish the conveying requirements. See page 6.
2. Identify the material and the corresponding material code. See page 6.
3. Determine conveying capacity, conveyor size and speed. See page 19.
4. Calculate required horsepower - select motor size. See page 23.
5. Determine the recommended size of components. See page 26.
6. Check torsional rating and screw deflection. See page 28.
Step 1: Establish conveying requirements
To properly design a conveyor to meet your needs it is important to know several parameters surrounding the
application. Fortunately, to begin you only need to know a few.
These are:
Type of material being conveyed
Required flow (lbs per hour or cubic feet per hour)
Distance material is going to be conveyed

Step 2: Identify material and corresponding material code


The type of material being moved can have a significant affect on the size and type of conveyor needed.The
following charts will help you classify your material and will help in selecting the proper conveyor components.
For screw conveyor design purposes, conveyed materials are classified in accordance with the code system shown
in Table A. This system conforms to that of the Conveyor Equipment Manufacturers Association (CEMA) which
ranks each material in 5 categories. Table B lists the codes for many materials that can be effectively conveyed by a
screw conveyor. If a material is not listed in Table B, it must be classified according to Table A, or by referring to a
listed material that is similar in weight, particle size and other characteristics.

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

MATERIALS
Table A: Material Classification Code
Density:
Bulk Density, Loose

Ave Lbs/cu ft

Very Fine - 100 mesh and under


Fine - 1/8mesh and under
Granular - 1/2mesh and under
Lumpy - containing lumps over 1/2
Irregular - fibrous, stringy, etc

A
B
C
D
E

Size:

Flowability:
Very free flowing
Free flowing
Average flowability
Sluggish

1
2
3
4

Abrasiveness:
Mildly abrasive
Moderately abrasive
Extremely abrasive

5
6
7

Other Characteristics:
Builds up & hardens
Generates static electricity
Decomposes - deteriorates in storage
Flammability
Becomes plastic or tends to soften
Very dusty
Aerates and becomes fluid
Explosiveness
Stickiness-adhesion
Contaminable, affecting use
Degradable, affecting use
Gives off harmful or toxic gas or fumes
Highly corrosive
Mildly corrosive
Hygroscopic
Interlocks, mats or agglomerates
Oils present
Packs under pressure
Very light and fluffy- may be windswept
Elevated temperature

F
G
H
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z

Example: Gluten, Meal = 40B35J (from table B)


40
=
Density (40 lbs per cubic foot)
B
=
Size of material (fine, 1/8 mesh and under)
3
=
Flowability (average)
5
=
Abrasiveness (mild)
J
=
Other Characteristics (contaminable)
Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

MATERIALS
Table B
MATERIAL
Adipic Acid
Alfalfa Meal
Alfalfa Pellets
Alfalfa Seed
Almonds, Broken
Almonds, Whole Shelled
Alum, Fine
Alum, Lumpy
Alumina
Alumina Fines
Alumina Sized or Briquette
Aluminate Gel (Aluminate Hydroxide)
Aluminum Chips, Dry
Aluminum Chips, Oily
Aluminum Hydrate
Aluminum Ore (See Bauxite)
Aluminum Oxide
Aluminum Silicate (Andalusite)
Aluminum Sulfate
Ammonium Chloride, Crystalline
Ammonium Nitrate
Ammonium Sulfate
Antimony Powder
Apple Pomace, Dry
Arsenate of Lead (Lead Arsenate)
Arsenic Arsenic Oxide (Arsenolite)*
Arsenic Pulverized
Asbestos-Rock (Ore)
Asbestos-Shredded
Ash, Black Ground
Ashes, Coal, dry-1/2"
Ashes, Coal, dry-3"
Ashes, Coal, Wet-1/2"
Ashes, Coal, Wet-3"
Ashes, Fly ( Fly Ash)
Asphalt, Crushed-1/2"
Bagasse
Bakelite, Fine
Baking Powder
Baking Soda (Sodium Bicarbonate)
Barite (Barium Sulfate) + 1/2"-3"
Barite, Powder
Barium Carbonate
Bark, Wood, Refuse
Barley, Fine, Ground
Barley, Malted
Barley, Meal
Barley, Whole
Basalt
Bauxite, Dry, Ground
Bauxite, Crushed-3"
Beans, Castor, Meal
Beans, Castor, Whole Shelled

Mat'l Class
Code
45A35
18B45WY
42C25
13B15N
29C35Q
29C35Q
48B35U
55B25
58B27MY
35A27MY
65D37
45B35
11E45V
11E45V
17C35

90A17M
49C35S
52C25
49A45FRS
54A35NTU
52C35FOTU
A35
15C45Y
72A35R
110A35R
30A25R
81D37R
30E46XY
105B35
40C46TY
38D46T
48C46T
48D46T
38A36M
45C45
9E45RVXY
38B25
48A35
48A25
150D36
150A35X
72A45R
15E45TVY
31B35
31C35
28C35
42B25N
93B27
68B25
80D36
38B35W
36C15W

Conveyor
Loading
30A
30A
45
45
30A
30A
30A
45
15
15
15
30B
30A
30A
30A

15
45
45
30A
30A
30A
30B
30B
30A
30A
45
15
30B
30A
30B
30B
30B
30B
30B
30A
30A
45
30A
45
30B
30A
30A
30A
30A
30A
30A
45
15
45
30B
30A
45

COMPONENT
GROUP
2B
2D
2D
1A,1B,1C
2D
2D
3D
2A,2B
3D
3D
3D
2D
2D
2D
1A,1B,1C

3D
3A,3B
1A,1B,1C
1A,1B,1C
3D
1A,1B,1C
2D
2D
1A,1B,1C
100-120
2D
3D
2D
1A,1B,1C
3D
3D
3D
3D
3D
1A,1B,1C
2A,2B,2C
1A,1B,1C
1B
1B
3D
2D
2D
3D
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
3D
2D
3D
1A,1B,1C
1A,1B,1C

WEIGHT
(lbs. per cu ft.)
45
14-22
41-43
10-15
27-30
28-30
45-50
50-60
55-65
35
65
45
7-15
7-15
13-20

60-120
49
45-58
45-52
45-62
45-58

15
72
1.2
30
81
20-40
105
35-45
35-40
45-50
45-50
30-45
45
7-10
30-45
40-55
40-55
120-180
120-180
72
10-20
24-38
31
28
36-48
80-105
68
75-85
35-40
36

MATL. FACTOR
(Fm)
0.5
0.6
0.5
0.4
0.9
0.9
0.6
1.4
1.8
1.6
2
1.7
1.2
1.4
1.4

1
0.7
1.3
1
1.6
1
1.611.4
1
2
1
2.5
3
2.5
3
4
2
2
1.5
1.4
0.6
0.6
2.6
2
1.6
2
0.4
0.4
0.4
0.5
1.8
1.8
2.5
0.8
0.5

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

MATERIALS
MATERIAL
Beans, Navy, Dry
Beans, Navy, Steeped
Bentonite, Crude
Bentonite, - 100 Mesh
Benzene Hexachloride
Bicarbonate of Soda (Baking Soda)
Blood, Dried
Blood, Ground, Dried
Bone Ash (Tricalcium Phosphate)
Boneblack
Bonechar
Bonemeal
Bones, Whole*
Bones, Crushed
Bones, Ground
Borate of Lime
Borax, Fine
Borax Screening - 1/2"
Borax, 1 1/2-2" Lump
Borax, 2"-3" Lump
Boric Acid, Fine
Boron
Bran, Rice-Rye-Wheat
Braunite (Manganese Oxide)
Bread Crumbs
Brewers Grain, spent, dry
Brewers Grain, spent, wet
Brick, Ground - 1/8"
Bronze Chips
Buckwheat
Calcine, Flour
Calcium Carbide
Calcium Carbonate (See Limestone)
Calcium Fluoride (See Fluorspar)
Calcium Hydrate (Lime, Hydrated)
Calcium Hydroxide (Lime, Hydrated)
Calcium Lactate
Calcium Oxide (Lime, unslaked)
Calcium Phosphate
Calcium Sulfate (See Gypsum)
Carbon, Activated, Dry, Fine*
Carbon, Black, Pelleted*
Carbon, Black, Powder*
Carborundum
Casein
Cashew Nuts
Cast Iron, Chips
Caustic Soda
Caustic Soda, Flakes
Celite (Diatomaceous Earth)
Cement, Clinker
Cement, Mortar
Cement, Portland

Conveyor Eng. & Mfg. 1999

Mat'l Class
Code
48C15
60C25
37D45X
55A25MXY
56A45R
48A25
40D45U
30A35U
45A45
23A25Y
34B35
55B35
43E45V
43D45
50B35
60A35
50B25T
58C35
58D35
65D35
55B25T
75A37
18B355NY
120A36
23B35PQ
22C45
58C45T
110B37
40B45
40B25N
80A35
80D25N

40B35LM
40B35LM
28D45QTR
63B35U
45A45

100D27
36B35
35C45
165C45
88B35RSU
47C45RSUX
14A36Y
85D36
113B35Q
94A26M

Conveyor
Loading
45
45
30A
45
30A
45
30A
30A
30A
45
30A
30A
30A
30A
30A
30A
45
30A
30A
30A
45
15
30A
30B
30A
30A
30A
15
30A
45
30A
30A

30A
30A
30A
30A
30A

15
30A
30A
30A
30A
30A
30B
30B
30A
30B

COMPONENT
GROUP
1A,1B,1C
1A,1B,1C
2D
2D
1A,1B,1C
1B
2D
1A,1B,
1A,1B
1A,1B
1A,1B
2D
2D
2D
2D
1A,1B,1C
3D
2D
2D
2D
3D
2D
1A,1B,1C
2D
1A,1B,1C
1A,1B,1C
2A,2B
3D
2D
1A,1B,1C
1A,1B,1C
2D

2D
2D
2A,2B
1A,1B,1C
1A,1B,1C

3D
2D
2D
2D
3D
3A,3B
3D
3D
3D
2D

WEIGHT
(lbs. per cu ft.)
48
60
34-40
50-60
56
40-55
35-45
30
40-50
20-25
27-40
50-60
35-50
35-50
50
60
45-55
55-60
55-60
60-70
55
75
16-20
120
20-25
14-30
55-60
100-120
30-50
37-42
75-85
70-90

40
40
26-29
60-65
40-50

100
36
32-37
130-200
88
47
11-17
75-95
133
94

MATL. FACTOR
(Fm)
0.5
0.8
1.2
0.7
0.6
0.6
2
1
1.6
1.5
1.6
1.7
3
2
1.7
0.6
0.7
1.5
1.8
2
0.8
1
0.5
2
0.6
0.5
0.8
2.2
2
0.4
0.7
2

0.8
0.8
0.6
0.6
1.6

3
1.6
0.7
4
1.8
1.5
1.6
1.8
3
1.4

Conveyor Eng. & Mfg.

MATERIALS
MATERIAL
Cement, Aerated (Portland)
Cerrusite (Lead Carbonate)
Chalk, Crushed
Chalk, Pulverized
Charcoal, Ground
Charcoal, Lumps
Chocolate, Cake Pressed
Chrome Ore
Cinders, Blast Furnace
Cinders, Coal
Clay (See Bentonite, Diatomaceous
Earth, Fullers Earth, Kaolin & Marl)
Clay, Ceramic, Dry, Fines
Clay, Calcined
Clay, Brick, Dry, Fines
Clay, Dry, Lumpy
Clinker, Cement (Cement Clinker)
Clover Seed
Coal, Anthracite (River & Culm)
Coal, Anthracite, Sized - 1/2"
Coal, Bituminous, Mined
Coal, Bituminous, Mined, Sized
Coal, Bituminous, Mined, Slack
Coal, Lignite
Cocoa Beans
Cocoa, Nibs
Cocoa, Powdered
Cocoanut, Shredded
Coffee, Chaff
Coffee, Green Bean
Coffee, Ground, Dry
Coffee, Ground, Wet
Coffee, Roasted Bean
Coffee, Soluble
Coke, Breeze
Coke, Loose
Coke, Petrol, Calcined
Compost
Concrete, Pre-Mix Dry
Copper Ore
Copper Ore, Crushed
Copper Sulphate, (Bluestone)
Copperas (Ferrous Sulphate)
Copra, Cake Ground
Copra, Cake, Lumpy
Copra, Lumpy
Copra, Meal
Cork, Fine Ground
Cork, Granulated
Corn, Cracked
Corn, Ear*
Corn, Germ
Corn, Gluten*

10

Mat'l Class
Code
68A16M
250A35R
85D25
71A25MXY
23A45
23D45Q
43D25
133D36
57D36T
40D36T
__

Conveyor
Loading
30B
30A
30A
45
30A
30A
30A
30B
30B
30B
__

COMPONENT
GROUP
2D
2D
2D
2D
2D
2D
2B2B
3D
3D
3D
__

WEIGHT
(lbs. per cu ft.)
60-75
240-260
75-95
67-75
18-28
18-28
40-45
125-140
57
40
__

MATL. FACTOR
(Fm)
1.4
1
1.9
1.4
1.2
1.4
1.5
2.5
1.9
1.8
__

70A35P
90B36
110C36
68D35
85D36
47B25N
60B35TY
55C25
50D35LNYX
48D35QV
47C45T
41D35T
38C25Q
35C25
33A45XY
21E46
20B25FZMY
29C25PQ
25A35P
40A45X
25C25PQ
19A35PUY
30C37
30D37
40D37
40D45TV
103C36U
135D36
125D36
85C35S
63C35U
43B45HW
28D35HW
22E35HW
43B35HW
10B35JNY
14C35JY
45B25P

21B35PY

30A
30B
30B
30A
30B
45
30A
45
30A
30A
30A
30A
30A
45
30A
30B
45
45
30A
30A
45
30A
15
15
15
30A
30B
30B
30B
30A
30A
30A
30A
30A
30A
30A
30A
45

1A,1B,1C
3D
3D
2D
3D
1A,1B,1C
2A,2B
2A,2B
1A,1B
1A,1B
2A,2B
2D
1A,1B
2D
1B
2B
1A,1B
1A,1B
1A,1B
1A,1B
1B
1B
3D
3D
3D
3A,3B
3D
3D
3D
2A,2B,2C
2D
1A,1B,1C
2A,2B,2C
2A,3B,3C
2D
1A,1B,1C
1A,1B,1C
1A,1B,1C
2A,2B
1A,1B,1C

60-80
80-100
100-120
60-75
75-95
45-48
55-61
49-61
40-60
45-50
43-50
37-45
30-45
35
30-35
20-22
20
25-32
25
35-45
20-30
19
25-35
23-35
35-45
30-50
85-120
120-150
100-150
75-95
50-75
40-45
25-30
22
40-45
5-15
12-15
40-50
56
21

1.5
2.4
2
1.8
1.8
0.4
1
1
0.9
1
0.9
1
0.5
0.5
0.9
1.5
1
0.5
0.6
0.6
0.4
0.4
1.2
1.2
1.3
1
3
4
4
1
1
0.7
0.8
1
0.7
0.5
0.5
0.7

0.4

30A

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

MATERIALS
MATERIAL
Corn, Grits
Corn, Seed
Corn, Shelled
Corn, Starch*
Corn, Sugar
Corn Cobs, Ground
Corn Cobs, Whole*
Cornmeal
Corn Oil, Cake
Cottonseed, Cake, Crushed
Cottonseed, Cake, Lumpy
Cottonseed, Dry, Delinted
Cottonseed, Dry, Not Delinted
Cottonseed, Flakes
Cottonseed, Hulls
Cottonseed, Meal, Expeller
Cottonseed, Meal, Extracted
Cottonseed, Meats, Dry
Cottonseed, Meats, Rolled
Cracklings, Crushed
Cryolite, Dust
Cryolite, Lumpy
Cullet, Fine
Cullet, Lump
Culm, (Coal, Anthracite)
Cupric Sulphate (Copper Sulfate)
Detergent (Soap Detergent)
Diatomaceous Earth
Dicalcium Phosphate
Disodium Phosphate
Distillers Grain-Spent Dry
Distillers Grain, Spent Wet
Dolomite, Crushed
Dolomite, Lumpy
Earth, Loam, Dry, Loose
Ebonite, Crushed
Egg Powder
Epsom Salts (Magnesium Sulfate)
Feldspar, Ground
Feldspar, Lumps
Feldspar, Powder
Felspar, Screenings
Ferrous Sulfide - 1/2"
Ferrous Sulfide - 100M
Ferrous Sulphate
Fish Meal
Fish Scrap
Flaxseed
Flaxseed Cake (Linseed Cake)
Flaxseed Meal (Linseed Meal)
Flour Wheat
Flue Dust, Basic Oxygen Furnace
Flue Dust, Blast Furnace

Conveyor Eng. & Mfg. 1999

Mat'l Class
Code
43B35P
45C25PQ
45C25
30A15M
33B35PU
17C25Y
14E35
36B35P
25D45HW
43C45HW
43D45HW
31C25X
22C45XY
23C35HWY
12B35Y
28B45HW
38B45HW
40B35HW
38C45HW
45D45HW
83A36V
100D36
100C37
100D37
60B35TY
85C35S
33B35FQ
14A36Y
45A35
28A35
30B35
50C45V
90C36
95D36
76C36
67C35
16A35MPY
45A35U
73A37
95D37
100A36
78C37
128C26
113A36
63C35U
38C45HP
45D45H
44B35X
49D45W
35B45W
37A45LP
53A36LM
118A36

Conveyor
Loading
30A
45
45
45
30A
45
30A
30A
30A
30A
45
30A
30A
30A
30A
30A
30A
30A
30A
30B
30B
15
15
30A
30A
30A
30B
30A
30A
30A
30A
30B
30B
30B
30A
30A
30A
15
15
30B
15
30B
30B
30A
30A
30A
30A
30A
30A
30A
30B
30B

COMPONENT
GROUP
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1B
1A,1B,1C
2A,2B
1A,1B
1A,1B
1A,1B
2A,2B
1A,1B
1A,1B
1A,1B
1A,1B
3A,3B
1A,1B
1A,1B
1A,1B
2A,2B,2C
2D
2D
3D
3D
2A,2B
2A,2B,2C
1A,1B,1C
3D
1A1A,1B,1C
3D
2D
3A,3B
2D
2D
2D
1A,1B,1C
1B
1A,1B,1C
2D
2D
2D
2D
1A,1B,1C
1A,1B,1C
2D
1A,1B,1C
2A,2B,2C
1A,1A,1B,1C
2A,2B
1A,1B
1B
3D
3D

WEIGHT
(lbs. per cu ft.)
40-45
45
45
25-50
30-35
17
12-15
32-40
25
40-45
40-45
22-40
18-25
20-25
12
25-30
35-40
40
35-40
40-50
75-90
90-110
80-120
80-120
55-61
75-95
15-50
11-17
40-50
25-31
30
40-60
80-100
90-100
76
63-70
16
40-50
65-80
90-100
100
75-80
120-135
105-120
50-75
35-40
40-50
43-45
48-50
25-45
33-40
45-60
110-125

MATL. FACTOR
(Fm)
0.5
0.4
0.4
1
1
0.6
0.5
0.6
1
1
0.6
0.9
0.8
0.9
0.5
0.5
0.6
0.6
1.3
2
2.1
2
2.5
1
1
0.8
1.6
1.6
0.5
0.5
0.8
2
2
1.2
0.8
1
0.8
2
2
2
2
2
2
1
1
1.5
0.4
0.7
0.4
0.6
3.5
3.5

11

Conveyor Eng. & Mfg.

MATERIALS
MATERIAL
Flue Dust, Boiler H. Dry
Fluorspar, Fine (Calcium Floride)
Fluorspar, Lumps
Flyash
Foundry Sand, Dry (Sand)
Fullers Earth, Dry, Raw
Fullers Earth, Oily, Spent
Fullers Earth, Calcined
Galena (Lead Sulfide)
Gelatine, Granulated
Gilsonite
Glass, Batch
Glue, Ground
Glue, Pearl
Glue, Veg. Powdered
Gluten, Meal
Granite, Fine
Grape, Pomace
Graphite Flake
Graphite Flour
Graphite Ore
Guano Dry*
Gypsum, Calcined
Gypsum, Calcined, Powdered
Gypsum, Raw - 1
Hay, Chopped*
Hexanedioic Acid (Adipic Acid)
Hominy, Dry
Hops, Spend, Dry
Hops, Spent, Wet
Ice, Crushed
Ice, Flaked*
Ice, Cubes
Ice, Shell
Ilmenite Ore
Iron Ore Concentrate
Iron Oxide Pigment
Iron Oxide, Millscale
Iron Pyrites (See Ferrous Sulfide)
Iron Sulphate (Ferrous Sulfate)
Iron Sulfide (See Ferrous Sulfide)
Iron Vitriol (Ferrous Sulfate)
Kafir (Corn)
Kaolin Clay
Kaolin Clay-Tale
Kryalith (See Cryolite)
Lactose
Lamp Black (See Carbon Black)
Lead Arsenate
Lead Carbonate
Lead Ore - 1/8
Lead Ore - 1/2
Lead Oxide (Red Lead) - 100 Mesh

12

Mat'l Class
Code
38A36LM
90B36
100D36
38A36M
95D37Z
35A25
63C45OW
40A25
250A35R
32B35PU
37C35
90C37
40B45U
40C35U
40A45U
40B35P
85C27
18D45U
40B25LP
28A35LMP
70D35L
70C35
58B35U
70A35U
75D25
10C35JY
45A35
43C25D
35D35
53D45V
40D35O
43C35O
34D35O
34D45O
150D37
150A37
25A36LMP
75C36

73C35U

73C35U
43C25
63D25
49A35LMP

32A35PU

72A35R
250A35R
235B35
205C36
90A35P

Conveyor
Loading
30B
30B
30B
30B
15
45
30A
45
30A
30A
30A
15
30A
30A
30A
30A
15
30A
45
30A
30A
30A
30A
30A
30A
30A
30A
30A
30A
30A
30A
30A
30A
30A
15
15
30B
30B
30A
30A
45
30A
30A
30A
30A
30A
30A
30B
30A

COMPONENT
GROUP
3D
2D
2D
3D
3D
2D
3D
3D
2D
1B
3D
3D
2D
1A,1B,1C
1A,1B,1C
1B
3D
2D
1A,1B,1C
1A,1B,1C
2D
3A,3B
2D
2D
2D
2A,2B
2B
1A,1B,1C
2A,2B,2C
2A,2B
2A,2B
1B
1B
1B
3D
3D
1A,1B,1C
2D

2D

2D
3D
2D
2D

1B

1A,1B,1C
2D
3D
3D
2D

WEIGHT
(lbs. per cu ft.)
30-45
80-100
90-110
30-45
90-100
30-40
60-65
40
240-260
32
37
80-100
40
40
40
40
80-90
15-20
40
28
65-75
70
55-60
60-80
70-80
8-12
45
35-50
35
50-55
35-45
40-45
33-35
33-35140-160
120-180
25
75

50-75

50-75
40-45
63
42-56

32

72
240-260
200-270
180-230
30-150

MATL. FACTOR
(Fm)
2
2
2
2
2.6
2
2
2

0.8
1.5
2.5
1.7
0.5
0.6
0.6
2.5
1.4
0.5
0.5
1
2
1.6
2
2
1.6
0.5
0.4
1
1.5
0.4
0.6
0.4
0.4
2
2.2
1
1.6

1
0.5
2
2

0.6

1.4
1
1.4
1.4
1.2

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

MATERIALS
MATERIAL
Lead Oxide (Red Lead) - 200 Mesh
Lead Sulphide - 100 Mesh
Lignite (Coal Lignite)
Limanite, Ore, Brown
Lime, Ground, Unslaked
Lime Hydrated
Lime, Hydrated, Pulverized
Lime Pebble
Limestone, Agricultural
Limestone, Crushed
Limestone, Dust
Lindane (Benzene Hexachloride)
Linseed (Flaxseed)
Litharge (Lead Oxide)
Lithopone
Maize (Milo)
Malt, Dry, Ground
Malt, Dry Whole
Malt, Meal
Malt, Sprouts
Magnesium Chloride (Magnesite)
Manganese Dioxide*
Manganese Ore
Manganese Oxide
Manganese Sulfate
Marble, Crushed
Marl, (Clay)
Meat, Ground
Meat, Scrap (W/bone)
Mica, Flakes
Mica, Ground
Mica, Pulverized
Milk, Dried, Flake
Milk, Malted
Milk, Powdered
Milk, Sugar
Milk, Whole, Powdered
Mill Scale (Steel)
Milo, Ground
Milo Maize (Kafir)
Molybdenite Powder
Monosodium Phosphate
Motar, Wet*
Mustard Seed
Naphthalene Flakes
Niacin (Nicotinic Acid)
Oat Hulls
Oats
Oats, Crimped
Oats, Crushed
Oats, Flour
Oats, Rolled
Oleo Margarine (Margarine)

Conveyor Eng. & Mfg. 1999

Mat'l Class
Code
105A35LP
250A35R
41D35T
120C47
63B35U
40B35LM
36A35LM
55C25HU
68B35
88D36
75A46MY
56A45R
44B35X

48A35MR
43B15N
25B35NP
25C35N
38B25P
14C35P
33C45
78A35NRT
133D37
120A36
70C37
88B37
80D36
53E45HQTX
40E46H
20B16MY
14B36
14A36M
6B35PUY
29A45PX
33B25PM
32A35PX
28B35PUX
123E46T
34B25
43B15N
107B26
50B36
150E46T
45B15N
45B35
35A35P
10B35NY
26C25MN
23C35
22B45NY
35A35
22C35NY
59E45KHKPW

Conveyor
Loading
30A
30A
30A
15
30A
30A
30A
45
30A
30B
30B
30A
30A
30A
45
30A
30A
45
30A
30A
30A
15
30B
15
15
30B
30A
30B
30B
30B
30A
30A
45
30A
30A
30B
45
45
30B
30B
30B
45
30A
30A
30A
45
30A
30A
30A
30A
30A

COMPONENT
GROUP
2D
2D
2D
3D
1A,1B,1C
2D
1A,1B
2A,2B
2D
2D
2D
1A,1B,1C
1A,1B,1C
B
1A,1B
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B
2A,2B
3D
2D
3D
3D
2D
2A
2B
2D
2D
2D
1B
1B
1B
1B
1B
3D
1A,1B,1C
1A,1B,1C
2D
2D
3D
1A,1B,1C
1A,1B,1C
2D
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
2A,2B

WEIGHT
(lbs. per cu ft.)
30-180
240-260
37-45
120
60-65
40
32-40
53-56
68
85-90
55-95
56
43-45

45-50
40-45
20-30
20-30
36-40
13-15
33
70-85
125-140
120
70
80-95
80
50-55
40
17-22
13-15
13-15
5-6
27-30
20-45
32
20-36
120-125
32-36
40-45
107
50
150
45
45
35
8-12
26
19-26
22
35
19-24
59

MATL. FACTOR
(Fm)
1.2
1
1.7
0.6
0.8
0.6
2
2
2
1.6-2.0
0.6
0.4

1
0.4
0.5
0.5
0.4
0.4
1
1.5
2
2
2.4
2
1.6
1.5
1.5
1
0.9
1
0.4
0.9
0.5
0.6
0.5
3
0.5
0.4
1.5
0.6
3
0.4
0.7
0.8
0.5
0.4
0.5
0.6
0.5
0.6
0.4

13

Conveyor Eng. & Mfg.

MATERIALS
MATERIAL
Orange Peel, Dry
Oxalic Acid Crystals Ethane Diacid Crystals
Oyster Shells, Ground
Oyster Shells, Whole
Paper Pulp (4% or less)
Paper Pulp (6% to 15%)
Paraffin Cake - 1/2
Peanuts, Clean, in shell
Peanut Meal
Peanuts, Raw, Uncleaned (unshelled)
Peanuts, Shelled
Peas, Dried
Perlite-Expanded
Phosphate Acid Fertilizer
Phosphate Disodium (Sodium Phosphate)
Phosphate Rock, Broken
Phosphate Rock, Pulverized
Phosphate Sand
Plaster of Paris (See Gypsum)
Plumbago (See Graphite)
Polystyrene Beads
Polyvinyl, Chloride Powder
Polyvinyl, Chloride Pellets
Polyethylene, Resin Pellets
Potash (Muriate) Dry
Potash (Muriate) Mine Run
Potassium Carbonate
Potassium-Chloride Pellets
Potassium Nitrate-1/2
Potassium Nitrate - 1/8
Potassium Sulfate
Potato Flour
Pumice-1/8
Pyrite, Pellets
Quartz, - 100 Mesh
Quartz, - 1/2
Rice, Bran
Rice, Grits
Rice, Polished
Rice, Hulled
Rice, Hulls
Rice, Rough
Rosin - 1/2
Rubber, Reclaimed Ground
Rubber, Pelleted
Rye
Rye Bran
Rye Feed
Rye Meal
Rye Middlings
Rye, Shorts
Safflower, Cake

14

Mat'l Class
Code
15E45

Conveyor
Loading
30A

COMPONENT
GROUP
2A,2B

WEIGHT
(lbs. per cu ft.)
15

MATL. FACTOR
(Fm)
1.5

60B35QS
55C36T
80D36TV
62E45
61E45
45C45K
18D35Q
30B35P
18D36Q
40C35Q
48C15NQ
10C36
60B25T
55A35
80D36
60B36
95B37
40B35PQ
25A45KT
25E45KPQT
33C45Q
70B37
75D37
51B36
125C25TU
76C16NT
80B26NT
45B46X
48A35MNP
45B46
125C26
75A27
85C27
20B35NY
44B35P
30C15P
47C25P
21B35NY
34C35N
67C45Q
27C45
53D45
45B15N
18B35Y
33B35N
38B35
42B35
33C35
50D26

30A
30B
30B
30A
30A
30A
30A
30A
30B
30A
45
30B
45
30A
30B
30B
15

1A,1B
3D
3D
2A,2B
2A,2B
1A,1B
2A,2B
1B
3D
1B
1A,1B,1C
2D
2A,2B
1A,1B
2D
2D
3D
1B
2B
1B
1A,1B
3D
3D
2D
3D
3D
3D
2D
1A,1B
3D
3D
3D
3D
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
2A,2B,2C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B
2A,2B
2D

60
50-60
80
62
60-62
45
15-20
30
15-20
35-45
45-50
8-12
60
50-60
75-85
60
90-100
40
20-30
20-30
30-35
70
75
51
120-130
76
80
42-48
48
42-48
120-130
70-80
80-90
20
42-45
30
45-49
20-21
32-36
65-68
23-50
50-55
42-48
15-20
33
35-40
42
32-33
50

1
1.6-2.0
2.1-2.5
1.5
1.5
0.6
0.6
0.6
0.7
0.4
0.5
0.6
1.4
0.
2.1
1.7
2
0.4
1
0.6
0.4
2
2.2
1
1.6
1.2
1.2
1
0.5
1.6
2
1.7
2
0.4
0.4
0.4
0.4
0.4
0.6
1.5
0.8
1.5
0.4
0.4
0.5
0.5
0.5
0.5
0.6

30A
30A
30A
30A
15
15
30B
45
30B
30B
30B
30A
30B
30B
15
15
30A
30A
45
45
30A
30A
30A
30A
30A
45
30A
30A
30A
30A
30A
30B

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

MATERIALS
MATERIAL
Safflower, Meal
Safflower Seed
Saffron (See Safflower)
Sal Ammoniac (Ammonium Chloride)
Salt Cake, Dry Coarse
Salt Cake, Dry Pulverized
Salicylic Acid
Salt, Dry Coarse
Salt, Dry Fine
Saltpeter-(See Potassium Nitrate)
Sand Dry Bank (Damp)
Sand Dry Bank (Dry)
Sand Dry Silica
Sand Foundry (Shake Out)
Sand (Resin Coated) Silica
Sand (Resin Coated) Zircon
Sawdust, Dry
Sea-Coal
Sesame Seed
Shale, Crushed
Shellac, Powdered or Granulated
Silicon Dioxide (See Quartz)
Silica, Flour
Silica Gel + 1/2"-3"
Slag, Blast Furnace Crushed
Slag, Furnace Granular, Dry
Slate, Crushed, - 1/2"
Slate, Ground, - 1/8"
Sludge, Sewage, Dried
Sludge, Sewage, Dry Ground
Soap, Beans or Granules
Soap, Chips
Soap Detergent
Soap, Flakes
Soap, Powder
Soapstone, Talc, Fine
Soda Ash, Heavy
Soda Ash, Light
Sodium Aluminate, Ground
Sodium Aluminum Fluoride (See Cryolite)
Sodium Aluminum Sulphate*
Sodium Bentonite (See Bentonite)
Sodium Bicarbonate (Baking Soda)
Sodium Chloride (See Salt)
Sodium Carbonate (See Soda Ash)
Sodium, Hydrate (See Caustic Soda)
Sodium Hydroxide (See Caustic Soda)
Sodium Borate (See Borax)
Sodium Nitrate
Sodium Phosphate
Sodium Sulfate (See Salt Cake)
Sodium Sulfite
Sorghum, Seed (See Kafir or Milo)

Conveyor Eng. & Mfg. 1999

Mat'l Class
Code
50B35
45B15N

49A45FRS
85B36TU
75B36TU
29B37U
53C36TU
75B36TU

120B47
100B37
95B27
95D37Z
104B27
115A27
12B45UX
65B36
34B26
88C36
31B35P

80A46
45D37HKQU
155D37Y
63C37
85C36
84B36
45E47TW
50B46S
25B35Q
20C35Q
33B35FQ
10B35QXY
23B25X
45A45XY
60B36
28A36Y
72B36

75A36

48A25

75D25NS
55A35

96B46X

Conveyor
Loading
30A
45
30A
30B
30B
15
30B
30B
15
15
15
15
15
15
30A
30B
30B
30B
30A
30B
15
15
15
30B
30B
15
30B
30A
30A
30A
30A
45
30A
30B
30B
30B
30B
45

30A
30A
30B

COMPONENT
GROUP
1A,1B,1C
1A,1B,1C

1A,1B,1C
3D
3D
ED
3D
3D

3D
3D
3D
3D
3D
3D
1A,1B,1C
2D
2D
2D
1B

2D
3D
3D
3D
2D
2D
3D
2D
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
1A,1B,1C
2D
2D
2D

2D

1B

2A,2B
1A,1B

2D

WEIGHT
(lbs. per cu ft.)
50
45

45-52
85
65-85
29
45-60
70-80

110-130
90-110
90-100
90-100
104
115
10-13
65
27-41
85-90
31

80
45
130-180
60-65
80-90
82-85
40-50
45-55
15-35
15-25
15-50
5-15
20-25
40-50
55-65
20-35
72

75

40-55

70-80
50-60

96

MATL. FACTOR
(Fm)
0.6
0.4

.7
2.1
1.7
0.6
1
1.7

2.8
1.7
2
2.6
2
2.3
0.7
1
0.6
2
0.6

1.5
2
2.4
2.2
2
1.6
0.8
0.8
0.6
0.6
0.8
0.6
0.9
2
1
0.8
1

0.6

1.2
0.9

1.5

15

Conveyor Eng. & Mfg.

MATERIALS
MATERIAL
Soybean, Cake
Soybean, Cracked
Soybean, Flake, Raw
Soybean, Flour
Soybean Meal, Cold
Soybean Meal Hot
Soybeans, Whole
Starch
Steel Turnings, Crushed
Sugar Beet, Pulp, Dry
Sugar Beet, Pulp, Wet
Sugar, Refined, Granulated Dry
Sugar, Refined, Granulated Wet
Sugar, Powdered
Sugar, Raw
Sulphur, Crushed - 1/2"
Sulphur, Lumpy, - 3"
Sulphur, Powdered
Sunflower Seed
Talcum, - 1/2"
Talcum Powder
Tanbark, Ground*
Timothy Seed
Titanium Dioxide Ore (Llmanite Ore)
Tobacco, Scraps
Tobacco, Snuff
Tricalcium Phosphate
Triple Sugar Phosphate
Trisodium Phosphate
Trisodium Phosphate Granular
Trisodium Phosphate, Pulverized
Tung Nut Meats, Crushed
Tung Nuts
Urea Prills, Coated
Vermiculite, Expanded
Vermiculite, Ore
Vetch
Walnut Shells, Crushed
Wheat
Wheat, Cracked
Wheat, Germ
White Lead, Dry
Wood Chips, Screened
Wood Flour
Wood Shavings
Zinc, Concentrate Residue
Zinc Oxide, Heavy
Zinc Oxide, Light

Mat'l Class
Code
42D35W
35C36NW
22C35Y
29A35MN
40B35
40B35T
48C26NW
38A15M
125D46WV
14C26
35C35X
53B35PU
60C35P
55A35PX
60B35PX
55C35N
83D35N
55A35MN
29C15
85C36
55A36M
55B45
36B35NY
150D37
20D45Y
30B45MQ
45A45
53B36RS
60C36
60B36
50A36
28D25W
28D15
45B25
16C35Y
80D36
48B16N
40B36
47C25N
43B25N
23B25
88A36MR
20D45VY
26B35N
12E45VY
78B37
33A45X
13A45XY

Conveyor
Loading
30A
30B
30A
30A
30A
30A
30B
45
30B
30B
30A
30A
30A
30A
30A
30A
30A
30A
45
30B
30B
30A
30A
15
30A
30A
30A
30B
30B
30B
30B
30A
30A
45
30A
30B
30B
30B
45
45
45
30B
30A
30A
30A
15
30A
30A

COMPONENT
GROUP
2A,1B,1C
2D
1A,1B,1C
1A,1B,1C
1A,1B,1C
2A,2B
3D
1A,1B,1C
3D
2D
1A,1B,1C
1B
1B
1B
1B
1A,1B
2A,2B
1A,1B
1A,1B,1C
2D
2D
1A,1B,1C
1A,1B,1C
3D
2A,2B
1A,1B,1C
1A,1B
3D
2D
2D
2D
2A,2B
2A,2B
1A,1B,1C
1A,1B
2D
1A,1B,1C
2D
1A,1B,1C
1A,1B,1C
1A,1B,1C
2D
2A,2B
1A,1B
2A,2B
3D
1A,1B
1A,1B

WEIGHT
(lbs. per cu ft.)
40-43
30-40
18-25
27-30
40
40
45-50
25-50
100-150
12-15
25-45
50-55
55-65
50-60
55-65
50-60
80-85
50-60
19-38
80-90
50-60
55
36
140-160
15-25
30
40-50
50-55
60
60
50
28
25-30
43-46
16
80
48
35-45
45-48
40-45
18-28
75-100
10-30
16-36
8-16
75-8
30-35
10-15

MATL. FACTOR
(Fm)
1
0.5
0.8
0.8
0.5
0.5
1
1
3
0.9
1.2
1.0-1.2
1.4-2.0
0.8
1.5
0.8
0.8
0.6
0.5
0.9
0.8
0.7
0.6
2.0
0.8
0.9
1.6
2
1.7
1.7
1.6
0.8
0.7
1.2
0.5
1
0.4
1
0.4
0.4
0.4
1
0.6
0.4
1.5
1
1
1

Consult Conveyor Eng. & Mfg. on all information

16

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

ENGINEERING
Special Materials and Applications:
When designing a Screw Conveyor, special considerations must be given to the selection of components if the material conveyed
has unusual characteristics. The following are examples.
Abrasive Materials:
Abrasive materials can cause excessive wear on conveyor components. They should be carried at slower speeds and at
lower trough loads. For very abrasive materials, it may be necessary to use thicker flights and troughs, surface hardeners or
special alloy components.
Contaminable Materials:
Contaminable materials, such as certain chemicals and food additives, require the use of sealed end bearings and hanger
bearings of wood, nylon or other dry operating type. Trough covers should be tightly sealed and easily removable for
frequent cleaning and all the internal welds that contact the material may require polishing to eliminate material entrapment.
Degradable Materials
Materials that tend to break up or separate should be carried in large diameter conveyors at very slow speeds to minimize
physical agitation of the material.
Extreme Temperatures
Conveyors moving materials at extreme temperatures should be constructed of metal alloys designed to meet these
conditions. The use of jacketed troughs may be advisable, wherein a heating or cooling medium may be circulated to keep
the conveyed material within safe operating temperatures. Conveyors handling hot materials may also experience thermal
expansion and will increase in length as the temperature of the trough and screw increases when the hot material begins to
be conveyed (see Thermal Expansion, page 30).
Explosive Materials
The conveyor must be designed with non-sparking and explosion proof components and must be tightly sealed. Where
hazardous dusts exist, an exhaust system may be needed for venting.
Fluidizing Materials
When conveying materials that tend to aerate and increase in volume, the conveyor size and speed must be designed on the
basis of this larger aerated volume and density.
Hygroscopic Materials
Hygroscopic materials readily absorb moisture and tend to become denser and less free flowing. This must be taken into
account when determining the size, speed, and horsepower of the conveyor. Tightly sealed conveyors that exclude exterior
atmosphere are effective in handling these materials.
Mixing in Transit
When mixing or blending of materials is required a conveyor screw consisting of ribbon flighting, cut and folded flighting, cut
flighting or paddles may be used alone or in any combination to obtain desired result.
Incline Conveying
Incline screw conveyors have a greater horsepower requirement and lower capacity rating than horizontal conveyors. The
amount the horsepower increases and capacity decreases depending on the angle of incline and the characteristics of the
material being conveyed.
Viscous or Sticky Materials
Ribbon flight conveyors are recommended in order to minimize material build-up.
For materials that have these or other special characteristics,
consult our engineering department for design recommendations.

Conveyor Eng. & Mfg. 1999

17

Conveyor Eng. & Mfg.

ENGINEERING
Table C: Maximum Lump Size (inch)
Class 1
10% lumps
Ratio = 1.75

Class 2
25% lumps
Ratio = 2.5

Class 3
95% lumps
Ratio = 4.5

Screw Dia.

Pipe O.D.

Size (inches)
Radial Clearance

6
9

2 3/8
2 3/8

2 5/16
3 13/16

1 1/4
2 1/4

3/4
1 1/2

1/2
3/4

2 7/8

3 9/16

2 1/4

1 1/2

3/4

12

2 7/8

5 1/16

2 3/4

12

3 1/2

4 3/4

2 3/4

12

4 1/2

2 3/4

14

3 1/2

5 3/4

3 1/4

2 1/2

1 1/4

14

5 1/2

3 1/4

2 1/2

1 1/4

14

4 1/2

5 1/4

16

6 1/2

3 3/4

2 3/4

1 1/2

16

4 1/2

6 1/4

3 3/4

2 3/4

1 1/2

16

5 9/16

5 23/32

3 1/4

2 1/4

1 1/4

18

7 1/2

4 1/4

1 3/4

18

4 1/2

7 1/4

4 1/4

1 3/4

18

5 9/16

6 23/32

3 3/4

2 1/2

1 1/2

20

8 1/2

4 3/4

3 1/2

20

4 1/2

8 1/4

4 3/4

3 1/2

20

5 9/16

7 23/32

4 1/4

1 1/2

24
24

4 1/2
5 9/16

10 1/4
9 23/32

6
5 1/2

3 3/4
3 3/4

2 1/2
2

Material Lump Size Limitation


The size of a screw conveyor not only depends on the capacity required, but also on the size and proportion of lumps in the
material to be handled. The size of a lump is determined by the maximum dimension it measures around the center of the
material.
The character of the material lump classifies the material in one of three classes;
Class 1
A mixture of lumps and fine particles of which not more than 10% are lumps ranging from maximum size to one half of the
maximum; and 90% are lumps smaller than one half of the maximum size.
Class 2
A mixture of lumps and fine particles of which not more than 25% are lumps ranging from maximum size to one half of the
maximum; and 75% are lumps smaller than one half of the maximum size.
Class 3
A mixture of lumps only of which 95% or more are lumps ranging from maximum size to one half of the maximum size; and
5% or less are lumps less than one tenth of the maximum size.
The allowable size of a lump in a screw conveyor is a function of the radial clearance between the outside diameter of the central
pipe and the radius of the inside of the screw trough (See Figure 1), as well as the proportion of lumps in the mix. Table C shows
the recommended maximum lump size for each customary screw diameter and the three lump classes.

CONVEYOR DIA.

PIPE O.D.

RADIAL CLEARANCE
1/2" CLEARANCE

Figure 1

18

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

ENGINEERING
Step 3: Determine capacity, conveyor size and speed
In order to determine the size and speed of a screw conveyor, it is first necessary to establish the material code number and
design capacity. In Step #2 you identified the material code number, the following will illustrate how this code number determines
the cross-sectional loading of the conveyor that should be used. For applications where special types of screws are required; such
as short pitch screws, cut flights, cut and folded flights and ribbon flights, a design capacity must first be calculated. The design
capacity is found by multiplying the required capacity by one or more of the capacity factors that are involved. See Tables C, D &
E for capacity factors.

Design Capacity Calculation:


Design Cap = Required Capacity x Capacity Factor(s)
Standard Pitch conveyors: Capacity Factor = 1.0

Multiple flight conveyor screws: Capacity Factor = 1.0

Table D: Flight Factor


TYPE
Cut Flight
Cut & Folded Flight

15%

CONVEYOR LOADING
30%

45%

1.1
*

1.15
1.5

1.2
1.7

* Not Recommended

Table E: Pitch Factor


Pitch

Description

Standard

Pitch = Dia.

Factor
1

Short

Pitch = 2/3 Dia.

1.5

Half
Long

Pitch = 1/2 Dia.


Pitch = 1 1/2 Dia.

2.0
0.67

Table F: Ribbon Factor


Screw Dia.
6
9
10
12
12
14
16
18
20
24

Ribbon Width
1
1
1
2
2
2
2
3
3
3

15%
1.32
1.34
1.45
1.32
1.11
1.27
1.55
1.33
1.60
2.02

Conveyor Loading
30%
1.52
1.54
1.67
1.52
1.27
1.45
1.69
1.53
1.75
2.14

45%
1.79
1.81
1.96
1.79
1.5
1.71
1.90
1.80
1.96
2.28

* For sizes larger than 24, consult Conveyor Eng & Mfg Co

Conveyor Eng. & Mfg. 1999

19

Conveyor Eng. & Mfg.

ENGINEERING
Drive Efficiencies
The efficiencies of various speed reduction mechanisms are listed in Table G. These efficiencies represent conservative figures
for the components of the drive train, taking into account possible slight misalignments, uncertain maintenance and the effects of
temperature change. While there are variations in the efficiency of different manufacturers product, the data given in Table G will
cover any such discrepancies.
Appropriate service factors for individual power transmission components should be determined from the manufacturers
catalogs, taking into account the intended service, hours of operation and the type of operating conditions.

Table G: Drive Efficiency

E = 88%

E = 88%

E = 88%

E = 88%

20

Screw Conveyor Drive

Reducer mounts on trough


end, and is directly connected
to the conveyor screw and
includes integral thrust
bearing, seal gland, and drive
shaft. Motor mount may be
positioned at top, either side,
or below. Separate drive
shaft, end bearing, and seal
are not required.

Shaft Mount Reducer

Reducer mounts on
conveyor drive shaft. Motor
and V-Belt drive may be in
any convenient location. The
torque arm may be fastened
to the floor, or fitted to trough
end. Requires
extended drive shaft.

Gear Motor Reducer


or Helical Reducer
with sprockets

Integral motor-reducer or
scoop mount motor with chain
drive to conveyor drive shaft.
Usually mounted to side of
trough by means of an
adapter plate.

Direct coupled
concentric reducer

Motor-reducer directcoupled to base type


reducer, coupling shaft.
Usually mounted on floor or
platform as close as possible
to conveyor.

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

ENGINEERING
Conveyor Size and Speed:
The conveyor size and speed can be determined form the table below in conjunction with the recommended loading from the
material code, and the design capacity.
Table H
Maximum
Recommended
rpm

Percent
Trough Load
Screw Dia.

Conveyor Eng. & Mfg. 1999

Capacity
(ft3/hr)
At Max rpm

Capacity
(ft3/hr)
At One rpm

6
9
12
14
16
18
20
24
30
36

60
55
50
50
45
45
40
40
30
20

45
150
325
520
700
1010
1250
2180
3152
3597

0.8
2.7
6.5
10.4
15.6
22.5
31.2
54.6
105.0
184.0

6
9
12
14
16
18
20
24
30
36

120
100
90
85
80
75
70
65
50
35

180
545
1160
1770
2500
3380
4370
7100
10506
12593

1.5
5.5
12.9
20.8
31.2
45.0
62.5
109.0
210.0
369.0

6
9
12
14
16
18
20
24
30
36

60
55
50
47
44
41
38
36
27
19

90
295
646
696
1382
1834
2361
3928
5673
6836

1.5
5.7
12.9
14.8
31.4
44.7
62.1
109.1
210.0
360.0

6
9
12
14
16
18
20
24
30
36

165
155
145
140
130
120
110
100
70
40

368
1270
2820
4370
6060
8120
10300
16400
22062
21587

2.2
8.2
19.4
31.2
46.7
67.6
93.7
164.0
315.0
540.0

6
9
12
14
16
18
20
24
30
36

300
275
255
240
220
210
190
100
115
70

1415
4832
10760
16342
2228
30529
37385
16400
76519
79754

4.7
17.6
42.0
68.0
101.0
145.0
196.0
164.0
665.0
1139.0

21

Conveyor Eng. & Mfg.

ENGINEERING
The conveyor speed (N) is determined by the formula:

N =

Design Capacity (ft3/hr)


1 revolution capacity ft3/hr)

N = revolutions per minute of the screw, not greater than the maximum recommended speed.

22

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

ENGINEERING
Step 4: Calculating Horsepower (Horizontal Conveying)
The horsepower required to operate a horizontal screw conveyor is based on proper installation, uniform and regular feed rate to
the conveyor and other design criteria. The horsepower requirment is the total of the horsepower to overcome the friction (HPf) of
the conveyor components and the horsepower to transport the material (HPm) multiplied by the overload factor (Fo) and divided
by the total drive efficiency (e), or:
LNFd Fb
HPf =
1,000,000
(HPf + HPm) Fo
HPtotal =
e
DcLWFm
HPm =
1,000,000

The following factors determine the horsepower requirement of a screw conveyor operating under these conditions.
Dc
e
Fb
Fd
Fm
Fo
L
N
W

=
=
=
=
=
=
=
=
=

Design capacity in cubic feet per hour.


Drive efficiency (Expressed as a decimal)
Hanger bearing factor. (See Table K)
Conveyor diameter factor. (See Table J)
Material factor. (See Table B)
Overload factor. (See Table L)
Total length of conveyor, feet
Operating speed, rpm
Weight of material conveyed, lbs. per cubic foot.

It is generally accepted practice that most power transmitting elements of a screw conveyor be sized and selected to safely handle
the rated motor horsepower. If, for example, a screw conveyor requires 3.5 horsepower as determined by the above formula, a 5
horsepower motor must be used, and it is desirable that all the power transmitting elements be capable of safely handling the full 5
horsepower.

Conveyor Eng. & Mfg. 1999

23

Conveyor Eng. & Mfg.

ENGINEERING
Table J: Diameter Factor

Table K: Bearing Factor

Screw
Diameter

Fd

12

18

31

10

37

Canvas Base Phenolic*

12

55

Oil Impregnated Bronze*


Oil Impregnated Wood*

14

78

16

106

18

135

20

165

24

235

30

360

36

512

Component Group

Bearing Type

Factor Fb

Group A

Ball

Babbitt
Bronze
Group B

Graphite Bronze*

1.7

Plastic*
Group C

Nylon*

2.0

Teflon*
Group D

Chilled Hard Iron*

4.4

Hardened Alloy Sleeve*

Table L: Overload Factor

Fo Overload Factor
3.0
2.9
2.8
2.7
2.6
2.5
2.4
2.3

Factor Fo

2.2
2.1
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.2

0.3

0.4

0.5

0.6

0.8

Horsepower HPf + HPm


For Values of HPf + HPm greater than 5.2, Fo is 1.0
Trace the Value of (HPf + HPm) vertically to the diagonal line, then across to the left where the Fo value is listed.

24

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

ENGINEERING
Example:
Material:
Weight:
Capacity:
Length:

Corn Germ
21 lbs per cubic foot
2500 cubic foot per hour
45 foot

Referring to the material Table B, the material code is 21B35JZ, Conveyor loading is 30A, the component group is 1A-1B-1C
and the material factor is 0.4.
From Table H, an 18 conveyor would be selected from the 30%A loading to achieve the 2500 cubic feet per hour requirement
within the recommended rpm range. At 1 rpm this conveyor will move 45 cubic feet. Therefore, the speed of the conveyor would
be:
Designed Capacity (ft3/hr)
N =
1 rpm capacity (ft3/hr)

2500

45

= 55.6 rpm

The resulting horsepower would be:

HPf

HPm

LNFdFb

1,000,000

DcLWFm
=
1,000,000

45 x 56 x 135 x 1.7

1,000,000

0.578

2500 x 45 x 21 x 0.4

= 0.945
1,000,000

From Figure 2, using HPf + HPm (1.523), Fo = 2.05


Thus:

HPtotal

(HPf + HPm) Fo
=
e

(.578 + .945) 1.77


=
.85

3.17 ( Use 5.0 HP)

A 5.0 or 7.5 HP drive could be used depending on the application. More conservative sizes may accommodate future increased
capacities.

Conveyor Eng. & Mfg. 1999

25

Conveyor Eng. & Mfg.

ENGINEERING
Step 4: Calculating Horsepower (Horizontal Conveying)
To properly select the screw conveyor components for a particular duty, they are broken down into three components groups.
These groups relate to both the material classification code and to the screw size, pipe size, type of bearings and trough
thickness.
The following service tables are a guide to proper selection of the appropriate component group for the material being conveyed.
Other components are then selected from the Components Section of this catalogue to suit the physical layout of the conveyor.
The components shown in this table are the types most commonly used for each of the component groups shown. However,
special applications and certain environments require special consideration that may not fall within the same parameters (see
special materials and applications).

(Light Service)
COMPONENT GROUPS 1A, 1B and 1C
Screw Dia

26

Shaft Size Dia.

Sectional Screw #

Helicoid Screw #

Trough Thickness

Cover Thickness

1 1/2

6S309

6H304

16 ga.

16 ga.

1 1/2

9S309

9H306

14

14

9S409

9H406

14

14

12

12S409

12H408

12

14

12

2 7/16

12S509

12H508

12

14

12

12S612

12H614

12

14

14

2 7/16

14S509

14H508

12

14

14

14S612

14H614

12

14

16

16S612

10

14

18

18S612

10

12

18

3 7/16

18S712

10

12

20

20S612

10

12

24

3 7/16

24S716

10

12

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

ENGINEERING
(Heavy Service)
COMPONENT GROUPS 2A, 2B and 2C
Screw Dia

Shaft Size Dia.

Sectional Screw #

Helicoid Screw #

Trough Thickness

Cover Thickness

1 1/2

6S309

6H308

14 ga.

14 ga.

1 1/2

9S309

9H312

10 ga.

14

9S412

9H412

10 ga.

14

12

12S412

12H412

3/16

14

12

2 7/16

12S512

12H512

3/16

14

12

12S616

12H614

3/16

14

14

2 7/16

14S512

3/16

14

14

14S616

14H614

3/16

14

16

16S616

16H614

3/16

14

18

18S616

3/16

12

18

3 7/16

18S716

3/16

12

20

20S616

3/16

12

20

3 7/16

20S716

3/16

12

24

3 7/16

24S716

3/16

12

30

3 15/16

30S724

3/16

10

36

4 7/16

36S932

3/16

10

(Extra Heavy Service)


COMPONENT GROUPS 3A, 3B and 3C
Screw Dia

Shaft Size Dia.

Sectional Screw #

Helicoid Screw #

Trough Thickness

6S412

10 ga.

Cover Thickness
14 ga.

9S416

3/16

14

12

2 7/16

12S516 or 12S524

3/16 or 1/4

14 or 12

12

12S624 or 12S632

3/16 or 1/4

14 or 12

14

2 7/16

14S524

3/16 or 1/4

14 or 12

14

24S624 or 14S632

3/16 or 1/4

14 or 12

16

16S624 or 16S632

3/16 or 1/4

14 or 12

16

3 7/16

16S724 or 16732

3/16 or 1/4

14 or 12

18

18S624

1/4

12 or 10

18

3 7/16

18S724 or 18S732

1/4

12 or 10

20

20S624

1/4

12 or 10

20

3 7/16

20S724 or 20S732

1/4

12 or 10

24

3 7/16

24S724 or 24732

1/4

12 or 10

24

3 15/16

24S824 or 24S832

1/4

10

30

4 7/16

30S924 or 30S932

1/4

10

36

4 15/16

36S1024 or 36S1032

1/4

10

Conveyor Eng. & Mfg. 1999

27

Conveyor Eng. & Mfg.

ENGINEERING
Step 6: Check torsional rating and screw deflection
Note: The component sizes in the following tables are minimums for the loadings shown. Overhung loads, axial loads and
bending moments induced by long screws, long shafts, pedestal bearings, offset reducers and other unusual loading
conditions are not represented in these calculations. Contact CEMC for final sizing of components.
Torsional Rating
Screw conveyors are limited in overall length and size by the amount of torque that can be safely transmitted through the
components selected. The shafts, bolts and pipe all need to be sized appropriately for the drive horsepower and rpm.
Table M combines the various torsional ratings of bolts, couplings and pipes so that it is easy to compare the torsional ratings of
all the stressed parts of standard conveyor screws. The table conforms to the CEMC design standards (often more conservative
than CEMA standards).
The lowest torsional rating figure for any given size of coupling will be the one that determines how much horsepower may be
transmitted. The torque produced (TQ) from the drive of the conveyor is a function of the size of the motor (HP) and the speed
of the conveyor (rpm).
63025 x HP
Torque, TQ =
rpm
Example:
A 5 hp motor driving a conveyor at 56 rpm will produce:
TQ = 63025 x 5/56 =5627 inch lbs of torque
This torque value can now be used to check the selected components of the conveyor.

Table M: Allowable Component Torque (inch - lbs.)


PIPE (Sch 40)
Shaft Dia.

Size

*BOLTS

COUPLINGS

Torque

Size

Torque

Size

2 Bolt

3 Bolt

1 1/2

3925

1 1/2

3070

1/2

3240

4860

2 1/2

14250

7600

5/8

7600

11400

2 7/16

23100

2 7/16

15090

5/8

9270

13900

3 1/2

32100

28370

3/4

16400

24600

3 7/16

43000

3 7/16

42550

7/8

25600

38400

*Bolt shear stress only. Bearing stresses may require the installation of bolt pads for certain combinations.

The 5627 inch lbs. of torque produced by the 5 hp motor above would exceed allowable torque for 1-1/2" shafts and 2-bolt
couplings.

28

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

Deflection
It is also important to check the screw conveyor for deflection as well as torsional capability. The amount of deflection the pipe of
the screw experiences due to the weight of the screw is directly to the useful life of the pipe. Deflection of the conveyor screws of
standard length is not usually a problem. However, if longer than standard sections of screw are to be used without intermediate
hanger bearings, care should be taken to prevent the screw flights from contacting the trough. Deflection should be held to a minimum to increase the useful life of the screw.
The deflection at the mid span of the screw may be calculated from the following formula.

Where :

5WL3

384 x (2.9 x 107) I

D = Deflection at mid span in inches


W = Total screw weight in pounds (see pages)
L = Screw length in inches (distance between bearing supports)
I = Moment of Inertia of pipe (see Table N)

Table N: Moment of Inertia


PIPE SIZE

Schedule 40

2 1/2

3 1/2

10

0.7

1.5

3.0

4.8

7.2

15.2

28.1

72.5

161.0

Schedule 80

8.7

1.9

3.9

6.3

9.6

20.7

40.5

106.0

212.0

Schedule 80 (clad)

N/A

N/A

6.1

9.6

14.3

30.4

56.8

145.3

296.3

Example:
Determine how much deflection is in a 12SS624 screw that is 150long and mounted on 3-1/2sched 40 pipe.

W = 350 lbs
L = 180 inches
I = 4.79

5 (350) (180)

384 x (2.9 x 107) 4.79

.191 inches

As a rule of thumb, applications where the calculated deflection exceeds .17 inches should be referred to our engineering department for recommendation.
Note:

When screw deflection becomes excessive, additional stresses are applied to the component parts. These additional
stresses may result in fatigue and lead to premature screw failure.

Conveyor Eng. & Mfg. 1999

29

Conveyor Eng. & Mfg.

ENGINEERING
Thermal Expansion
When screw conveyors are required to convey hot or cold materials it is necessary to recognize that the conveyor will change
length slightly from the original ambient temperature length.
The recommended general practice is to provide supports for the trough which will allow movement of the trough end feet during
the trough expansion or contraction when handling hot or cold materials. The drive end of the conveyor usually is fixed, allowing
the remainder of the trough to expand or contract. In the event there are intermediate inlets or discharge spouts that cannot move,
then expansion type troughs are required.
The conveyor and the trough may also expand or contract at different rates. In this case expansion hangers are generally recommended. The trough end opposite the drive should incorporate an expansion type ball or roller bearing which will safely provide
sufficient movement.
The change in screw conveyor length may be calculated using the following:
r L = L (t1 - t2) C
Where:

r L
L
t1
t2
C

=
=
=
=
=

increment of change in length (inches)


Overall conveyor length (inches)
Upper limit of temperature, (F)
Lower limit of temperature, (F)
Coefficient of linear expansion, per (F)

The coefficient of expansion is as follows by material type:


Hot rolled carbon steel
= 6.5 x 10-6/F
Stainless steel (304/316) = 9.9 x 10-6/F
Aluminum
= 12.8 x 10-6/F
Example:
A stainless steel conveyor 45 feet long is subjected to a rise in temperature of 200 degrees F, reaching a temperature of 260 F
from an original metal temperature of 60 F.
t1 = 260 F
t2 = 60 F
t1 - t2 = 200 F
L = 45' x 12" = 540 inches
C = 9.9 x10-6/F
r L = (540")(200 F)(9.9 x 10-6/F) = 1.07 inches
In the above example sufficient means should be used to accommodate the expected change in length due to expansion of over
1".

Consult our Engineering department for thermal expansion applications.

30

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

LAYOUT
AS REQUIRED

b
AS REQUIRED

1/2E

j
L

M
R

G
AS REQUIRED

BOLTS

Conveyor Layout - U - Trough Type

b
AS REQUIRED

E
(2) HANGER POCKET

1/2E
D

G
D

BOLTS

AS REQUIRED

Conveyor Layout Tube Trough


Screw
Diameter

B Coupling
Diameter

C
Length

D
Length

F
Bolt

6
9
9
10
10
12
12
12
14
14
16
18
18
20
20
24
24
30
30
36
36

1 1/2
1 1/2
2
1 1/2
2
2
2 7/16
3
2 7/16
3
3
3
3 7/16
3
3 7/16
3 7/16
3 15/16
3 7/16
3 15/16
3 15/16
4 7/16

9'-10
9'-10
9'-10
9'-10
9'-10
11'-10
11'-9
11'-9
11'-9
11'-9
11'-9
11'-9
11'-8
11'-9
11'-8
11'-8
11'-8
11'-8
11'-8
11'-8
11'-7

10' 0
10' 0
10' 0
10' 0
10' 0
12' 0
12' 0
12' 0
12' 0
12' 0
12' 0
12' 0
12' 0
12' 0
12' 0
12' 0
12' 0
12' 0
12' 0
12' 0
12' 0

2
2
2
2
2
2
3
3
3
3
3
3
4
3
4
4
4
4
4
4
5

3/8
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
1
1

6
8
8
9
9
10 1/2
10 1/2
10 1/2
11 1/2
11 1/2
13 1/2
14 1/2
14 1/2
15 1/2
15 1/2
17 1/2
17 1/2
21
21
25
25

1
1 1/2
1 1/2
1 3/4
1 3/4
1 5/8
1 5/8
1 5/8
1 5/8
1 5/8
2
2
2
2 1/4
2 1/4
2 1/2
2 1/2
2 3/4
2 3/4
2 3/4
2 3/4

4 1/2
6 1/8
6 1/8
6 3/8
6 3/8
7 3/4
7 3/4
7 3/4
9 1/4
9 1/4
10 5/8
12 1/8
12 1/8
13 1/2
13 1/2
16 1/2
16 1/2
19 3/4
19 3/4
24
24

5 5/8
7 7/8
7 7/8
8 7/8
8 7/8
9 5/8
9 5/8
9 5/8
10 7/8
10 7/8
12
13 3/8
13 3/8
15
15
18 1/8
18 1/8
21 1/2
21 1/2
26
26

5
7 1/8
7 1/8
7 7/8
7 7/8
8 7/8
8 7/8
8 7/8
10 1/8
10 1/8
11 1/8
12 3/8
12 3/8
13 3/8
13 3/8
15 3/8
15 3/8
18 3/8
18 3/8
23
23

7
10
10
11
11
13
13
13
15
15
17
19
19
21
21
25
25
31
31
37
37

8 1/8
9 3/8
9 3/8
9 1/2
9 1/2
12 1/4
12 1/4
12 1/4
13 1/2
13 1/2
14 7/8
16
16
19 1/4
19 1/4
20
20
24
24
*
*

1 1/2
1 5/8
1 5/8
1 3/4
1 3/4
2
2
2
2
2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2

1 3/16
1 5/16
1 5/16
1 9/16
1 9/16
1 3/8
1 3/8
1 3/8
1 3/8
1 3/8
1 3/4
1 3/4
1 3/4
2
2
2 1/4
2 1/4
2 1/2
2 1/2
2 3/8
2 3/8

* Has 4 Bolts
Consult Conveyor Eng & Mfg for larger sizes

Conveyor Eng. & Mfg. 1999

31

Conveyor Eng. & Mfg.

SCREWS
Ribbon Flight Screw: Used for conveying sticky, gummy or viscous substances, or where the material tends to stick to the flighting at the pipe. Available in integral style (as shown) or post style
ribbon.

Cut Flight Screw: Used for conveying light, fine, granular or


flaky materials. Also used for mixing material in transit or for removing grit and dirt from the grain, cottonseed, etc..

Cut and Folded Flight Screw: Used to create a lifting motion


with the material that promotes agitation and aeration while mixing.

Screw with Paddles: Used to mix material while being conveyed. Paddles may be fixed(welded in place) or adjustable pitch
(bolt mounted) to provide different degrees of mixing.

Paddle Screw: Used for complete mixing or stirring material.


Paddles may be fixed (welded in place) or adjustable pitch (bolt
mounted) to provide different degrees of mixing.

Short Pitch Screw: Used primarily in incline or hopper fed applications where the pitch is less than the diameter of the screw.

32

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

SCREWS
Screw conveyor flighting is made in either one of two ways, as helicoid or sectional. Helicoid flights are formed from a flat
bar or strip into a continuous helix. Sectional flights are formed from individual round plates then welded end to end to form a
continuous helix. The largest difference between the two flight types is that the helicoidflight thickness is thinner at the
edge than the base due to material stretch and sectionalflights have a continuous thickness.
Due to the way the two flights are manufactured the sectionalflight can be made from thicker material than the helicoid
flight and thus is used for heavier or more abrasive applications.
Enlarged views of the flighting tip shows the difference in material thickness between comparable sectional and helicoid flight
sizes.

Sectional
Heavier Duty

Helicoid
Lighter Duty

Tip Detail

Conveyor Eng. & Mfg. 1999

Tip Detail

33

Conveyor Eng. & Mfg.

SCREWS
The views of the various flighting orientations below will indicate which way the material will move given the rotation.

RIGHT

HAND

RIGHT

HAND

LEFT

LEFT

RIGHT

HAND

RIGHT

HAND

HAND

LEFT

HAND

LEFT

HAND

HAND

Special Screw Conveyor Weld Finishes


Certain applications may require continuously welding the flight to the pipe of the screw. Depending on the conveyed material this
weld may also need to be ground smoothto reduce contanimation.
Grind Smoothis a general term and subject to various interpretations. The table below should be used to determine which class

OPERATION
Weld spatter and slag removed
Rough grind welds to remove heavy weld ripple or unusual roughness
(40-50 grit finish)
Medium grind welds, leaving some pits and crevices
(80-100 grit finish)
Fine grind welds no pits or crevices permissible
(140-150 grit finish)
Polish to bright uniform finish

34

CLASS OF FINISH (per CEMA)


I
II
III
IV
V
X
X
X
X
X
X
X
X

X
X

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

SCREWS
A screw is either right hand or left hand depending on the form of the helix. The direction of the helix determines which way the
screw needs to rotate in order to move the material the proper direction.
The screw hand can be determined by looking at the end of the screw. The helix of a left hand screw is wrapped around the pipe
in a counter-clockwise direction, or to your left. The helix of a right hand screw is wrapped around the pipe in a clockwise direction, or to your right.

Left Hand

Right Hand

Numerical Designation
Screw Diameter

12 SS

Conveyor Type
H = Helicoid
HS =
Stainless Helicoid
S = Sectional
SS =
Stainless Sectional

FP = Full Pitch
HP = Half Pitch
VP = Variable Pitch
FL = Flight Lugs
BP = Bolt Pads
CF = Cut and Folded
Conveyor Eng. & Mfg. 1999

16 R

Coupling Diameter
3 = 1 1/2
4 = 2
5 = 2 7/16
6 = 3
7 = 3 7/16
8 = 3 15/16
9 = 4 7/16
10 = 4 15/16
11 = 5 7/16

CWOS = Continuous weld one side


CWBS = Continuous weld both sides

Hand of Conveyor
R = Right Hand
L = Left Hand
Flight Thickness
4 = 16 ga.
5 = 14 ga.
7 = 12 ga.
9 = 10 ga.
10 = 8 ga.
12 = 3/16
14 = 7/32
16 = 1/4
24 = 3/8
32 = 1/2

2B = 2-bolt drilling
3B = 3-bolt drilling

35

Conveyor Eng. & Mfg.

SCREWS
SECTIONAL
PITCH
Trough End

PITCH

C
1/2E
Length

1/2E

Sectional Flight

Sectional Screw
A
Screw

B
Coupling

Sectional

Nominal

C
Pipe

D
Flight

E
Coupling

Standard
Length

Complete
Std. Len.

Flight
Each

Dia.

Dial.

Part #

Pipe Size

O.D.

Thickness

Brg Len.

Ft.-in.

Wt. (lb)

Wt. (lb)

6
6

1 1/2
1 1/2

6SS309
6SS312

2
2

2 3/8
2 3/8

10 ga.
3/16

2
2

9'-10"
9'-10"

65
75

1.2
1.6

1 1/2

6SS316

2 3/8

1/4

9'-10"

87

2.1

1 1/2

9SS309

2 3/8

10 ga.

9'-10"

81

3.1

1 1/2

9SS312

2 3/8

3/16

9'-10"

100

4.1

1 1/2

9SS316

2 3/8

1/4

9'-10"

117

5.5

9SS409

2 1/2

2 7/8

10 ga.

9'-10"

100

2.9

9SS412

2 1/2

2 7/8

3/16

9'-10"

118

3.9

9SS416

2 1/2

2 7/8

1/4

9'-10"

134

5.1

9SS424

2 1/2

2 7/8

3/8

9'-10"

169

7.6

10

1 1/2

10SS309

2 3/8

10 ga.

9'-10"

85

3.9

10

1 1/2

10SS312

2 3/8

3/16

9'-10"

108

5.2

10

10SS409

2 1/2

2 7/8

10 ga.

9'-10"

107

3.7

10

10SS412

2 1/2

2 7/8

3/16

9'-10"

125

4.9

10

10SS416

2 1/2

2 7/8

1/4

9'-10"

147

6.5

10

10SS424

2 1/2

2 7/8

3/8

9'-10"

187

9.7

12

12SS412

2 1/2

2 7/8

3/16

11'-10"

170

7.5

12

12SS416

2 1/2

2 7/8

1/4

11'-10"

202

9.9

12

2 7/16

12SS512

3 1/2

3/16

11'-9"

191

7.0

12

2 7/16

12SS516

3 1/2

1/4

11'-9"

218

9.3

12

2 7/16

12SS524

3 1/2

3/8

11'-9"

273

13.9

12

12SS612

3 1/2

3/16

11'-9"

202

6.6

12

12SS616

3 1/2

1/4

11'-9"

228

8.8

12

12SS624

3 1/2

3/8

11'-9"

282

13.1

14

2 7/16

14SS512

3 1/2

3/16

11'-9"

209

10.0

14

2 7/16

14SS516

3 1/2

1/4

11'-9"

242

13.3

14

2 7/16

14SS524

3 1/2

3/8

11'-9"

312

19.9

14

14SS612

3 1/2

3/16

11'-9"

224

9.6

14

14SS616

3 1/2

1/4

11'-9"

255

12.7

14

14SS624

3 1/2

3/8

11'-9"

320

19.0

16

16SS612

3 1/2

3/16

11'-9"

244

13.2

16

16SS616

3 1/2

1/4

11'-9"

282

17.6

16

16SS624

4 1/2

3/8

11'-9"

360

26.3

16

16SS632

4 1/2

1/2

11'-9"

435

35.1

(continued)

36

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

SCREWS
SECTIONAL
PITCH
Trough End

PITCH

C
1/2E
Length

1/2E

Sectional Flight

Sectional Screw
A
Screw

B
Coupling

Sectional

Nominal

C
Pipe

D
Flight

E
Coupling

Standard
Length

Complete
Std. Len.

Flight
Each

Dia.
18
18

Dial.

Part #

Pipe Size

O.D.

Thickness

Brg Len.

Ft.-in.

Wt. (lb)

Wt. (lb)

3
3

18SS612
18SS616

3 1/2
3 1/2

4
4

3/16
1/4

3
3

11'-9"
11'-9"

264
308

17.1
22.7

18

18SS624

4 1/2

3/8

11'-9"

398

34.0

18

18SS632

4 1/2

1/2

11'-9"

487

45.3

18

3 7/16

18SS712

4 1/2

3/16

11'-8"

283

16.6

18

3 7/16

18SS716

4 1/2

1/4

11'-8"

325

22.0

18

3 7/16

18SS724

4 1/2

3/8

11'-8"

413

32.9

18

3 7/16

18SS732

4 1/2

1/2

11'-8"

498

43.7

20

20SS612

3 1/2

3/16

11'-9"

285

21.7

20

20SS616

3 1/2

1/4

11'-9"

335

28.9

20

20SS624

3 1/2

3/8

11'-9"

440

43.2

20

20SS632

3 1/2

1/2

11'-9"

540

57.6

20

3 7/16*

20SS712

4*

4 1/2

3/16

11'-8"

304

21.0

20

3 7/16*

20SS716

4*

4 1/2

1/4

11'-8"

352

28.0

20

3 7/16*

20SS724

4*

4 1/2

3/8

11'-8"

453

41.9

20

3 7/16*

20SS732

4*

4 1/2

1/2

11'-8"

550

55.7

24

3 7/16*

24SS716

4*

4 1/2

1/4

11'-8"

405

42.0

24

3 7/16*

24SS724

4*

4 1/2

3/8

11'-8"

531

63.0

24

3 7/16*

24SS732

4*

4 1/2

1/2

11'-8"

653

84.0

24

3 15/16*

24SS816

5*

5 9/16

1/4

11'-8"

476

39.9

24

3 15/16*

24SS824

5*

5 9/16

3/8

11'-8"

595

59.7

24

3 15/16*

24SS832

5*

5 9/16

1/2

11'-8"

710

79.5

30

3 7/16*

30SS716

4*

4 1/2

1/4

11'-8"

487

69.3

30

3 7/16*

30SS724

4*

4 1/2

3/8

11'-8"

651

104.0

30

3 7/16*

30SS732

4*

4 1/2

1/2

11'-8"

810

138.5

30

3 15/16*

30SS816

5*

5 9/16

1/4

11'-8"

556

66.2

30

3 15/16*

30SS824

5*

5 9/16

3/8

11'-8"

714

99.1

30

3 15/16*

30SS832

5*

5 9/16

1/2

11'-8"

866

132.0

36

3 15/16*

36SS816

5*

5 9/16

1/4

11'-8"

684

102.0

36

3 15/16*

36SS824

5*

5 9/16

3/8

11'-8"

834

151.5

36

3 15/16*

36SS832

5*

5 9/16

1/2

11'-8"

1024

201.0

36

4 7/16*

36SS916

6*

6 5/8

1/4

11'-7"

695

102.0

36

4 7/16*

36SS924

6*

6 5/8

3/8

11'-7"

875

151.5

36

4 7/16*

36SS932

6*

6 5/8

1/2

11'-7"

1065

201.0

Consult Conveyor Eng & Mfg. Co for larger sizes

*Pipe and shaft size shown should be considered minimum standard and are often larger as dictated by drive horsepower
Conveyor Eng. & Mfg. 1999

37

Conveyor Eng. & Mfg.

SCREWS
HELICOID

Trough End

PITCH

1/2E
Length

1/2E

Helicoid Screw

PITCH

F
Length

Helicoid Flighting

A
Screw

B
Coupling

Helicoid

Nominal

D
Pipe

Flight
F

Thickness
G

E
Coupling

Standard
Length

Complete
Std. Len.

Flight
Each

Flighting
Std. Len.
Wt. (lb)

Dia.

Dial.

Part #

Pipe Size

O.D.

Inside

Outside

Brg Len.

Ft.-in.

Wt. (lb)

Wt. (lb)

1 1/2

6HS304

2 3/8

1/8

1/16

9'-10"

52

14

1 1/2

9HS306

2 3/8

3/16

3/32

9'-10"

70

31

9HS406

2 1/2

2 7/8

3/16

3/32

9'-10"

91

30

10

1 1/2

10HS306

2 3/8

3/16

3/32

9'-10"

81

48

12

12HS408

2 1/2

2 7/8

1/4

1/8

11'-10"

140

12

67

38

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

SCREWS
RIBBON
Pitch

Trough End

Pitch

D
E

1/2E
Length

1/2E

Single Flight Ribbon


A
Screw

B
Coupling

Sectional

Nominal

Ribbon Flight

C
Pipe

D
Flight

F
Coupling

Standard
Length

Complete
Std. Len.

Flight
Each

Dia.

Dial.

Part #

Pipe Size

O.D.

Thickness

Width

Brg Len.

Ft.-in.

Wt. (lb)

Wt. (lb)

6
9

1 1/2
1 1/2

6SSR312
9SSR316

2
2

2 3/8
2 3/8

3/16
1/4

1
1 1/2

2
2

9'-10"
9'-10"

63
87

1.7
5.5

9SSR416

2 1/2

2 7/8

1/4

1 1/2

9'-10"

107

9.7

10

1 1/2

10SSR316

2 3/8

1/4

1 1/2

9'-10"

87

6.7

10

10SSR416

2 1/2

2 7/8

1/4

9'-10"

120

9.7

12

12SSR416

2 1/2

2 7/8

1/4

11'-10"

149

9.7
12.7

12

12SSR424

2 1/2

2 7/8

3/8

2 1/2

11'-10"

204

12

2 7/16

12SSR516

3 1/2

1/4

11'-9"

171

9.7

12

2 7/16

12SSR524

3 1/2

3/8

2 1/2

11'-9"

225

12.7

12

12SSR616

3 1/2

1/4

11'-9"

189

9.7

12

12SSR624

3 1/2

3/8

2 1/2

11'-9"

241

12.7

14

2 7/16

14SSR516

3 1/2

1/4

11'-9"

175

13.2

14

2 7/16

14SSR524

3 1/2

3/8

2 1/2

11'-9"

232

19.8

14

14SSR616

3 1/2

1/4

11'-9"

143

13.2

14

14SSR624

3 1/2

3/8

2 1/2

11'-9"

249

19.8

16

16SSR616

3 1/2

1/4

11'-9"

196

18.0

16

16SSR624

4 1/2

3/8

2 1/2

11'-9"

256

25.5

18

18SSR624

3 1/2

3/8

11'-9"

283

34.5

18

3 7/16

18SSR724

4 1/2

3/8

11'-8"

306

34.5

20

3 7/16

20SSR724

4 1/2

3/8

11'-8"

312

40.0

24

3 7/16

24SSR724

4 1/2

3/8

11'-8"

321

63.0

24

3 7/16

24SSR732

4 1/2

1/2

11'-8"

440

84.0

30

3 7/16

30SSR724

4 1/2

3/8

11'-8"

329

114.0

30

3 7/16

30SSR732

4 1/2

1/2

11'-8"

458

149.0

36

3 15/16

36SSR824

5 9/16

3/8

11'-8"

471

163.0

36

3 15/16

36SSR832

5 9/16

1/2

11'-8"

617

214.0

Consult Conveyor Eng & Mfg. Co for larger sizes

Conveyor Eng. & Mfg. 1999

39

Conveyor Eng. & Mfg.

SCREWS
PADDLE
Pitch

Screw Dia.

F
LOOSE HEXNUT

C
F

NUT w/ JAM NUT (SHOWN)


OR LOCKNUT

Style 2
Welded

Style 1
Adjustable
Screw
Dia.

Coupling
Dial.

Part #

Nominal
Pipe Size

Pipe
O.D.

Wt. Each
(lbs)

6
9

1 1/2
1 1/2

6SSP312
9SSP316

2
2

2 3/8
2 3/8

3
4 1/2

2 1/16
2 3/4

1 13/16
3 5/16

1/4
1/4

1/2
1/2

1 7/16
1 1/2

0.5
0.5

9SSP416

2 1/2

2 7/8

4 1/2

2 3/4

3 1/16

1/4

5/8

1 5/8

0.75

10

1 1/2

10SSP316

2 3/8

3 1/8

3 13/16

1/4

1/2

1 1/2

0.75

10

10SSP416

2 1/2

2 7/8

3 1/8

3 9/16

1/4

5/8

1 5/8

12

12SSP416

2 1/2

2 7/8

3 11/16

4 9/16

1/4

5/8

1 3/4

1.5

12

12SSP424

2 1/2

2 7/8

3 11/16

4 9/16

3/8

5/8

1 3/4

1.5

12

2 7/16

12SSP516

3 1/2

3 11/16

4 1/4

1/4

5/8

1 7/8

1.75

12

2 7/16

12SSP524

3 1/2

3 11/16

4 1/4

3/8

5/8

1 7/8

1.75

12

12SSP616

3 1/2

3 11/16

1/4

3/4

12

12SSP624

3 1/2

3 11/16

3/8

3/4

14

2 7/16

14SSP516

3 1/2

4 1/4

5 1/4

1/4

5/8

2.25

14

2 7/16

14SSP524

3 1/2

4 1/4

5 1/4

3/8

5/8

2.25

14

14SSP616

3 1/2

4 1/4

1/4

3/4

2 1/8

2.5

14

14SSP624

3 1/2

4 1/4

3/8

3/4

2 1/8

2.5

16

16SSP616

3 1/2

4 15/16

1/4

3/4

2 1/4

3.25

16

16SSP624

4 1/2

4 15/16

3/8

3/4

2 1/4

3.25

18

18SSP624

3 1/2

5 3/8

3/8

3/4

2 1/8

18

3 7/16

18SSP724

4 1/2

5 3/8

6 3/4

3/8

7/8

2 1/4

4.25

20

20SSP624

3 1/2

10

6 1/8

3/8

3/4

2 7/16

4.75

20

3 7/16

20SSP724

4 1/2

10

6 1/8

7 3/4

3/8

7/8

2 9/16

24

3 7/16

24SSP724

4 1/2

12

7 3/8

9 3/4

3/8

3/4

2 11/16

6.75

24

3 7/16

24SSP732

4 1/2

12

7 3/8

9 3/4

1/2

7/8

2 11/16

6.75

30

3 7/16

30SSP724

4 1/2

15

9 1/4

12 3/4

3/8

7/8

2 3/4

30

3 7/16

30SSP732

4 1/2

15

9 1/4

12 3/4

1/2

7/8

2 3/4

10.5

36

3 15/16

36SSP824

5 9/16

18

11

15 3/16

3/8

1 1/8

3 1/4

11.25

36

3 15/16

36SSP832

5 9/16

18

11

15 3/16

1/2

1 1/8

3 1/4

15

Consult Conveyor Eng & Mfg. Co for larger sizes

40

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

SCREWS
CLAD PIPE
Clad pipe is offered as an alternative to an all stainless pipe. It generally consists of schedule 10 stainless pipe surrounding sch 80
carbon steel pipe. The result is a product that includes the best properties of both materials. CEMC introduced clad pipe to the screw
conveyor industry over 10 years ago and it has been extremely successful, especially in tough applications.
Benefits:

Torque Capacity: The thicker walled clad pipe can handle more horsepower and torque than comparative sized stainless pipe.
Our destructive testing results are charted below (video of the actual testing is available).

Fatigue Resistant: Carbon steel has much higher fatigue resistance than stainless steel. Stainless screws tend to develop
stress cracks after a certain number of revolutions. This often leads to failure. Clad pipe offers the exceptional fatigue resistance
of carbon steel with the corrosion resistance of stainless.

Deflection: Clad pipe is more rigid structurally resulting is lower deflection as measured at the center of the screws span. This
lowers fatigue stress resulting in longer life and reduces the likelihood of screw to trough interference.

Price: Clad pipe was developed to obtain higher structural integrity, not a price advantage. But stainless prices have increased
over the years and we have developed more efficient methods in manufacturing clad pipe. The result is that, in most heavy-duty
applications, clad pipe is a better product at a lower price.
Caution: Clad pipe is not recommended in environments containing highly corrosive vapors (especially at elevated temperatures).
Pipe Cross Sections

4 SCH 40 S.S.

4 SCH 80 S.S.

4 SCH 80/10 Clad

Average Revolutions to Failure

120M

Yield Point

80

40

4 SCH
40 S.S.

4 SCH
80 S.S.

4 SCH
80/10 Clad

*Based on desctructive testing

Conveyor Eng. & Mfg. 1999

60 M

4 SCH
40 S.S.

4 SCH
80 S.S.

4 SCH
80/10 Clad

*Based on actual heavy-duty field applications


16, 3-bolt, standard length screws

41

Conveyor Eng. & Mfg.

SHAFTS
DRIVE
Standard Drive Shaft

Pedestal Drive Shaft

END
Standard End Shaft

Pedestal End Shaft

COUPLING
Standard Coupling Shaft

42

Close Coupling Shaft

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

SCREWS
DRIVE SHAFTS STANDARD

D
Trough
End Plate

Hole Dia. - E
Coupling Bolt - F

Trough
End Plate

Hole Dia. - E
Coupling Bolt - F

A
C

3-Bolt Drive Shaft Standard

2-Bolt Drive Shaft Standard

Shaft
Dia.

(2 Bolt)
Part #

(3 Bolt)
Part #

Keyway
Length

Keyway
Width

Keyway
Depth

1 1/2

CDS112

CDS112-3B

7/8

3 1/4

3/8

3/16

CDS2

CDS2-3B

7/8

4 1/2

1/2

1/4

2 7/16

CDS2716

CDS2716-3B

15/16

5 1/2

5/8

5/16

CDS3

CDS3-3B

6 1/4

3/4

3/8

3 7/16

CDS3716

CDS3716-3B

1 1/2

7 1/4

7/8

7/16

3 15/16

CDS31516-3B

1 3/4

8 5/8

1/2
1/2

4 7/16

CDS4716-3B

1 7/8

9 7/8

4 15/16

CDS41516-3B

2 1/4

9 7/8

1 1/4

5/8

5 7/16

CDS5716-3B

2 1/2

9 7/8

1 1/4

5/8

Shaft

C
2 Bolt

C
3 Bolt

E
Hole

F
Coupling

2 Bolt

3 Bolt
Weight

Dia.

Length

Length

Dia.

Bolt

Weight

1 1/2

14

17

17/32

1/2

8.5

15 1/4

18 1/4

21/32

5/8

13.8

16.5

2 7/16

17 3/4

20 3/4

1 1/2

21/32

5/8

23.5

27.4

19 1/4

22 1/4

1 1/2

25/32

3/4

38.5

44.5

3 7/16

23 1/4

27 1/4

29/32

7/8

61.1

71.6

3 15/16

30 1/8

1 3/16

1 1/8

100.8

4 7/16

32 7/8

2 1/2

1 5/16

1 1/4

144

4 15/16

2 1/2

1 9/16

1 1/2

5 7/16

1 13/16

1 3/4

Consult Conveyor Eng & Mfg. Co for larger sizes

DRIVE SHAFTS PEDESTAL Consult Conveyor Eng & Mfg Co.

Conveyor Eng. & Mfg. 1999

43

Conveyor Eng. & Mfg.

SHAFTS
END SHAFTS STANDARD

D
Trough
End Plate

Hole Dia. - E
Coupling Bolt - F

Trough
End Plate

Hole Dia. - E
Coupling Bolt - F

A
C

3-Bolt End Shaft Standard

2-Bolt End Shaft Standard

Shaft

(2 Bolt)

(3 Bolt)

C
2 Bolt

C
3 Bolt

E
Hole

F
Coupling

2 Bolt

3 Bolt
Weight

Dia.

Part #

Part #

Length

Length

Length

Length

Dia.

Bolt

Weight

1 1/2

CES112

CES112-3B

7/8

10 1/2

17/32

1/2

5.3

CES2

CES2-3B

7/8

10 1/2

13 1/2

21/32

5/8

9.4

12.0

2 7/16

CES2716

CES2716-3B

15/16

11 3/4

14 3/4

1 1/2

21/32

5/8

15.5

19.5

CES3

CES3-3B

12 1/2

15 1/2

1 1/2

25/32

3/4

25

31.0
50.6

3 7/16

CES3716

CES3716-3B

1 1/2

15 1/4

19 1/4

29/32

7/8

40.1

3 15/16

CES31516

CES31516-3B

1 3/4

23 1/8

1 3/16

1 1/8

80.0

4 7/16

CES4716

CES4716-3B

1 7/8

24 1/2

2 1/2

1 5/16

1 1/4

108.0

4 15/16

CES41516-3B

2 1/4

2 1/2

1 9/16

1 1/2

5 7/16

CES5716-3B

2 1/2

1 13/16

1 3/4

Consult Conveyor Eng & Mfg. Co for larger sizes

END SHAFTS PEDESTAL Consult Conveyor Eng & Mfg Co.

44

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

SCREWS
COUPLING SHAFTS STANDARD

Hole Dia. - E
Coupling Bolt - F

Hole Dia. - E
Coupling Bolt - F
D

3-Bolt Coupling Shaft Standard

2-Bolt Coupling Shaft Standard

Shaft

(2 Bolt)

(3 Bolt)

C
2 Bolt

C
3 Bolt

Dia.

Part #

Part #

Length

Length

Length

Length

1 1/2

CES112

CES112-3B

7/8

10 1/2

17/32

1/2

5.3

CES2

CES2-3B

7/8

10 1/2

13 1/2

21/32

5/8

9.4

12.0

2 7/16

CES2716

CES2716-3B

15/16

11 3/4

14 3/4

1 1/2

21/32

5/8

15.5

19.5

CES3

CES3-3B

12 1/2

15 1/2

1 1/2

25/32

3/4

25

31.0

3 7/16

CES3716

CES3716-3B

1 1/2

15 1/4

19 1/4

29/32

7/8

40.1

50.6

3 15/16

CES31516

CES31516-3B

1 3/4

23 1/8

1 3/16

1 1/8

80.0

4 7/16

CES4716

CES4716-3B

1 7/8

24 1/2

2 1/2

1 5/16

1 1/4

108.0

4 15/16

CES41516-3B

2 1/4

2 1/2

1 9/16

1 1/2

5 7/16

CES5716-3B

2 1/2

1 13/16

1 3/4

E
Hole

F
Coupling

2 Bolt

3 Bolt

Dia.

Bolt

Weight

Weight

COUPLING SHAFTS CLOSE

Hole Dia. - E
Coupling Bolt - F

Hole Dia. - E
Coupling Bolt - F

2-Bolt Close Coupling Shaft

3-Bolt Close Coupling Shaft

Shaft

(2 Bolt)

(3 Bolt)

C
2 Bolt

C
3 Bolt

E
Hole

F
Coupling

Dia.

Part #

Part #

Length

Length

Length

Length

2 Bolt

3 Bolt

Dia.

Bolt

Weight

Weight

1 1/2

CES112

CES112-3B

7/8

10 1/2

CES2

CES2-3B

7/8

10 1/2

17/32

1/2

5.3

13 1/2

21/32

5/8

9.4

12.0

2 7/16

CES2716

CES2716-3B

15/16

11 3/4

14 3/4

1 1/2

CES3

CES3-3B

12 1/2

15 1/2

1 1/2

21/32

5/8

15.5

19.5

25/32

3/4

25

3 7/16

CES3716

CES3716-3B

1 1/2

15 1/4

19 1/4

31.0

29/32

7/8

40.1

3 15/16

CES31516 CES31516-3B

1 3/4

23 1/8

50.6

1 3/16

1 1/8

80.0

4 7/16

CES4716

CES4716-3B

1 7/8

24 1/2

2 1/2

1 5/16

1 1/4

108.0

4 15/16

CES41516-3B

2 1/4

2 1/2

1 9/16

1 1/2

5 7/16

CES5716-3B

2 1/2

1 13/16

1 3/4

Consult Conveyor Eng & Mfg. Co for larger sizes

Conveyor Eng. & Mfg. 1999

45

Conveyor Eng. & Mfg.

TROUGHS
Formed Flange U-Trough: Top flanges are formed from the same sheet as the rest of the trough.
Easy to seal. This one piece construction makes it the most economical and widely used.

Double Formed Flange U-Trough: Similar to formed flange except side flange has extra vertical
bend for added strength and stiffness. Most common type for small to middle sizes.

Angle Flange U-Trough: The angle flange trough is flanged with structural steel angle that is
welded (skip or seam) to the top of the trough. Most common for larger sizes.

Rectangular Trough: Rectangular troughs are primarily used for highly abrasive material applications. This design allows a bed of material to form on the bottom of the trough to minimize the wear
to the material that would normally occur. These troughs may be constructed as formed or angle
flange troughs.

Flared Trough: Primarily used for materials that tend to bridge over the screw.

Formed Flange Tube Trough: Used to minimize material fallback in incline applications. Flanges
also allow trough to be dismantled for cleaning and maintenance.

Solid Tube Trough: Used to minimize material fallback in incline applications. More economical
than formed flange tube trough but requires removal of screw through trough end.

Channel Trough: Structural steel channel is used at the top of the trough for extra strength where
distance between supports are longer than standard. Also allows for bottom of trough to be removed for cleaning or replaced if worn from abrasive materials.

Jacketed Trough: Jackets may be added to any trough style to provide heating or cooling during
conveying using hot or cold water or low pressure steam in jacketed area.

46

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

TROUGHS
U-TROUGH
D

1/2 A

1/2 A

1/2 A

Angle Flange

Formed Flange

Double Formed Flange

Screw
Dia.

Trough
Thickness

Formed
Flange
Part #

Weight
Std.
Length

Angle
Flange
Part #

Weight
Std.
Length

Double
Formed
Part #

Weight
Std.
Length

Std.
Length

6
6
6
6
9
9
9
9
10
10
10
10
12
12
12
12
14
14
14
14
16
16
16
18
18
18
20
20
20
24
24
24
30
30
30
36
36

14 ga.
12 ga.
10 ga.
3/16
12 ga.
10 ga.
3/16
1/4
12 ga.
10 ga.
3/16
1/4
12 ga.
10 ga.
3/16
1/4
12 ga.
10 ga.
3/16
1/4
10 ga.
3/16
1/4
10 ga.
3/16
1/4
10 ga.
3/16
1/4
10 ga.
3/16
1/4
10 ga.
3/16
1/4
3/16
1/4

CTF614
CTF612
CTF610
CTF67
CTF912
CTF910
CTF97
CTF93
CTF1012
CTF1010
CTF107
CTF103
CTF1212
CTF1210
CTF127
CTF123
CTF1412
CTF1410
CTF147
CTF143
CTF1610
CTF167
CTF163
CTF1810
CTF187
CTF183
CTF2010
CTF207
CTF203
CTF2410
CTF247
CTF243
CTF3010
CTF307
CTF303
CTF367
CTF363

62
86
109
163
118
151
226
292
126
161
241
312
187
237
353
456
216
274
408
526
309
460
594
355
527
679
391
580
747
469
693
893
572
842
1082
1006
1294

CTA614
CTA612
CTA610
CTA67
CTA912
CTA910
CTA97
CTA93
CTA1012
CTA1010
CTA107
CTA103
CTA1212
CTA1210
CTA127
CTA123
CTA1412
CTA1410
CTA147
CTA143
CTA1610
CTA167
CTA163
CTA1810
CTA187
CTA183
CTA2010
CTA207
CTA203
CTA2410
CTA247
CTA243
CTA3010
CTA307
CTA303
CTA367
CTA363

84
105
126
174
142
172
239
299
150
182
254
319
227
272
376
469
256
308
431
540
344
483
608
424
581
721
459
634
789
538
748
935
660
916
1144
1085
1360

CTDF614
CTDF612
CTDF610
CTDF67
CTDF912
CTDF910
CTDF97
CTDF93
CTDF1012
CTDF1010
CTDF107
CTDF103
CTDF1212
CTDF1210
CTDF127
CTDF123
CTDF1412
CTDF1410
CTDF147
CTDF143
CTDF1610
CTDF167
CTDF163
CTDF1810
CTDF187
CTDF183
CTDF2010
CTDF207
CTDF203
CTDF2410
CTDF247
CTDF243
CTDF3010
CTDF307
CTDF303
CTDF367
CTDF363

64
85
112
168
123
156
234
302
131
166
249
322
193
244
364
467
222
281
418
537
316
471
605
362
537
690
398
590
758
475
704
904
581
856
1096
1019
1310

7
7
7
7
10
10
10
10
11
11
11
11
13
13
13
13
15
15
15
15
17
17
17
19
19
19
21
21
21
25
25
25
31
31
31
37
37

4 1/2
4 1/2
4 1/2
4 1/2
6 1/8
6 1/8
6 1/8
6 1/8
6 3/8
6 3/8
6 3/8
6 3/8
7 3/4
7 3/4
7 3/4
7 3/4
9 1/4
9 1/4
9 1/4
9 1/4
10 5/8
10 5/8
10 5/8
12 1/8
12 1/8
12 1/8
13 1/2
13 1/2
13 1/2
16 1/2
16 1/2
16 1/2
19 3/4
19 3/4
19 3/4
24
24

1 1/4
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
2
2
2
2
2
2
2
2
2
2
2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
3
3
3
3
3

9 11/16
9 3/4
9 13/16
9 7/8
13 1/4
13 5/16
13 3/8
13 1/2
14 1/4
14 5/16
14 3/8
14 1/2
17 1/4
17 5/16
17 3/8
17 1/2
19 1/4
19 5/16
19 3/8
19 1/2
21 5/16
21 3/8
21 1/2
24 5/16
24 3/8
24 1/2
26 5/16
26 3/8
26 1/2
30 5/16
30 3/8
30 1/2
37 5/16
37 3/8
37 1/2
43 3/8
43 1/2

10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"

Consult Conveyor Eng & Mfg. Co for larger sizes

Conveyor Eng. & Mfg. 1999

47

Conveyor Eng. & Mfg.

TROUGHS
FLARED
D
A

C
B

Screw
Dia.

Trough
Thickness

Flared
Part #

Weight
Std. Len.

Standard
Length

6
6
6
6
9
9
9
9
10
10
10
10
12
12
12
12
14
14
14
14
16
16
16
18
18
18
20
20
20
24
24
24

14 ga.
12 ga.
10 ga.
3/16
12 ga.
10 ga.
3/16
1/4
12 ga.
10 ga.
3/16
1/4
12 ga.
10 ga.
3/16
1/4
12 ga.
10 ga.
3/16
1/4
10 ga.
3/16
1/4
10 ga.
3/16
1/4
10 ga.
3/16
1/4
10 ga.
3/16
1/4

CTV614
CTV612
CTV610
CTV67
CTV912
CTV910
CTV97
CTV93
CTV1012
CTV1010
CTV107
CTV103
CTV1212
CTV1210
CTV127
CTV123
CTV1412
CTV1410
CTV147
CTV143
CTV1610
CTV167
CTV163
CTV1810
CTV187
CTV183
CTV2010
CTV207
CTV203
CTV2410
CTV247
CTV243

74
103
133
186
136
175
244
325
147
188
262
350
197
254
354
472
219
281
392
523
307
429
572
338
472
629
372
518
691
440
614
819

14
14
14
14
18
18
18
18
20
20
20
20
22
22
22
22
24
24
24
24
28
28
28
31
31
31
34
34
34
40
40
40

7
7
7
7
9
9
9
9
9 1/2
9 1/2
9 1/2
9 1/2
10
10
10
10
11
11
11
11
11 1/2
11 1/2
11 1/2
121/8
121/8
121/8
13 1/2
13 1/2
13 1/2
16 1/2
16 1/2
16 1/2

1 1/4
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
2
2
2
2
2
2
2
2
2
2
2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2

16 5/8
16 5/8
16 5/8
16 5/8
21 1/4
21 1/4
21 3/8
21 3/8
23 3/16
23 1/4
23 3/8
23 1/2
26 1/4
26 1/4
26 1/4
26 3/8
28 1/4
28 1/4
28 1/4
28 3/8
32 1/4
32 3/8
32 1/2
36 1/4
36 3/8
36 1/2
39 1/4
39 3/8
39 1/2
45 1/4
45 3/8
45 1/2

3 1/2
3 1/2
3 1/2
3 1/2
5
5
5
5
5 1/2
5 1/2
5 1/2
5 1/2
6 1/2
6 1/2
6 1/2
6 1/2
7 1/2
7 1/2
7 1/2
7 1/2
8 1/2
8 1/2
8 1/2
9 1/2
9 1/2
9 1/2
10 1/2
10 1/2
10 1/2
12 1/2
12 1/2
12 1/2

10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
10-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"
12-0"

Consult Conveyor Eng & Mfg. Co for larger sizes

48

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

TROUGHS
CHANNEL / DROP BOTTOM
D
C

Screw
Dia.

Trough
Thickness

Channel
Part #

Weight
Std. Len

Standard
Length

6
6
6
6
9
9
9
9
10
10
10
10
12
12
12
12
14
14
14
14
16
16
16
18
18
18
20
20
20
24
24
24

14 ga
12 ga
10 ga
3/16
12 ga
10 ga
3/16
1/4
12 ga
10 ga
3/16
1/4
12 ga
10 ga
3/16
1/4
12 ga
10 ga
3/16
1/4
10 ga
3/16
1/4
10 ga
3/16
1/4
10 ga
3/16
1/4
10 ga
3/16
1/4

CTDB614
CTDB612
CTDB610
CTDB67
CTDB912
CTDB910
CTDB97
CTDB93
CTDB1012
CTDB1010
CTDB107
CTDB103
CTDB1212
CTDB1210
CTDB127
CTDB123
CTDB1412
CTDB1410
CTDB147
CTDB143
CTDB1610
CTDB167
CTDB163
CTDB1810
CTDB187
CTDB183
CTDB2010
CTDB207
CTDB203
CTDB2410
CTDB247
CTDB243

64
88
115
173
127
160
241
311
135
171
256
331
199
251
375
481
229
289
430
553
325
485
623
373
553
710
410
608
780
489
726
931

7
7
7
7
10
10
10
10
11
11
11
11
13
13
13
13
15
15
15
15
17
17
17
19
19
19
21
21
21
25
25
25

4 1/2
4 1/2
4 1/2
4 1/2
6 1/8
6 1/8
6 1/8
6 1/8
6 3/8
6 3/8
6 3/8
6 3/8
7 3/4
7 3/4
7 3/4
7 3/4
9 1/4
9 1/4
9 1/4
9 1/4
10 5/8
10 5/8
10 5/8
12 1/8
12 1/8
12 1/8
13 1/2
13 1/2
13 1/2
16 1/2
16 1/2
16 1/2

1 1/4
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
2
2
2
2
2
2
2
2
2
2
2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2

9 11/16
9 3/4
9 13/16
9 7/8
13 1/4
13 5/16
13 3/8
13 1/2
14 1/4
14 5/16
14 3/8
14 1/2
17 1/4
17 5/16
17 3/8
17 1/2
19 1/4
19 5/16
19 3/8
19 1/2
21 5/16
21 3/8
21 1/2
24 5/16
24 3/8
24
26 5/16
26 3/8
26 1/2
30 5/16
30 3/8
30 1/2

10-0
10-0
10-0
10-0
10-0
10-0
10-0
10-0
10-0
10-0
10-0
10-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0
12-0

Consult Conveyor Eng & Mfg. Co for larger sizes

Conveyor Eng. & Mfg. 1999

49

Conveyor Eng. & Mfg.

TROUGHS
TUBE

1/2 A

Tubular Trough
(Angle Flange)

Tubular Trough
(Standard)

Tubular Trough
(Formed Flange)

Screw
Dia.

Housing
Thickness

Tube
Part #

Weight
Std. Len.

Angle
Flange
Part#

Weight
Std. Len.

Formed
Flange
Part#

Weight
Std. Len

Standard
Length

6
6
6
6
9
9
9
9
10
10
10
10
12
12
12
12
14
14
14
14
16
16
16
18
18
18
20
20
20
24
24
24

14 ga.
12 ga.
10 ga.
3/16
12 ga.
10 ga.
3/16
1/4
12 ga.
10 ga.
3/16
1/4
12 ga.
10 ga.
3/16
1/4
12 ga.
10 ga.
3/16
1/4
10 ga.
3/16
1/4
10 ga.
3/16
1/4
10 ga.
3/16
1/4
10 ga.
3/16
1/4

CTT614
CTT612
CTT610
CTT67
CTT912
CTT910
CTT97
CTT93
CTT1012
CTT1010
CTT107
CTT103
CTT1212
CTT1210
CTT127
CTT123
CTT1412
CTT1410
CTT147
CTT143
CTT1610
CTT167
CTT163
CTT1810
CTT187
CTT183
CTT2010
CTT207
CTT203
CTT2410
CTT247
CTT243

61
84
108
161
122
154
231
298
133
170
254
328
194
245
364
470
223
283
420
541
320
475
613
362
536
690
400
592
763
476
705
907

CTTA614
CTTA612
CTTA610
CTTA67
CTTA912
CTTA910
CTTA97
CTTA93
CTTA1012
CTTA1010
CTTA107
CTTA103
CTTA1212
CTTA1210
CTTA127
CTTA123
CTTA1412
CTTA1410
CTTA147
CTTA143
CTTA1610
CTTA167
CTTA163
CTTA1810
CTTA187
CTTA183
CTTA2010
CTTA207
CTTA203
CTTA2410
CTTA247
CTTA243

91
114
137
190
157
190
267
334
169
206
289
364
252
304
423
528
282
341
478
600
379
534
672
461
635
789
499
691
861
574
803
1006

CTTF614
CTTF612
CTTF610
CTTF67
CTTF912
CTTF910
CTTF97
CTTF93
CTTF1012
CTTF1010
CTTF107
CTTF103
CTTF1212
CTTF1210
CTTF127
CTTF123
CTTF1412
CTTF1410
CTTF147
CTTF143
CTTF1610
CTTF167
CTTF163
CTTF1810
CTTF187
CTTF183
CTTF2010
CTTF207
CTTF203
CTTF2410
CTTF247
CTTF243

75
103
131
197
144
183
274
354
155
198
296
384
229
291
433
559
259
328
488
631
365
544
703
419
622
802
457
678
874
533
790
1018

7
7
7
7
10
10
10
10
11
11
11
11
13
13
13
13
15
15
15
15
17
17
17
19
19
19
21
21
21
25
25
25

1 1/4
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
2
2
2
2
2
2
2
2
2
2
2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2

9 11/16
9 3/4
9 13/16
9 7/8
13 1/4
13 5/16
13 3/8
13 1/2
14 1/4
14 5/16
14 3/8
14 1/2
17 1/4
17 5/16
17 3/8
17 1/2
19 1/4
19 5/16
19 3/8
19 1/2
21 5/16
21 3/8
21 1/2
24 5/16
24 3/8
24 1/2
26 5/16
26 3/8
26 1/2
30 5/16
30 3/8
30 1/2

10'-0"
10'-0"
10'-0"
10'-0"
10'-0"
10'-0"
10'-0"
10'-0"
10'-0"
10'-0"
10'-0"
10'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"
12'-0"

Consult Conveyor Eng & Mfg. Co for larger sizes

50

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

END PLATES
Trough Endplate with Foot: Our most common endplate design for Utroughs. The integral foot design eliminates the need for saddles or feet
at the screw conveyor ends. Also provides additional structure for support
of drive mechanisms. Can be ordered with pedestal bearing mounts.

Trough Endplate without Foot: Can be used when other means are
provided for support, such as saddles.

Flared Trough Endplate with Foot: Used in the same situations as


above (with foot) when used with flared trough. Can be ordered with pedestal bearing mounts.

Tube Trough Endplate with Foot: The integral foot eliminates the need
for saddles at the end of tubular trough screw conveyors. Can be ordered
with pedestal bearing mounts.

Tube trough Endplate: Used when other means are provided for trough
support. This end plate allows eased of maintenance when a integral foot
is ordered on the trough flange where the endplate can be removed without provided temporary trough support.

Trough Endplate with Foot and Pedestal Bearing Mount: The pedestal pillow block mount allows clearance for packing gland seals or when
frequent seal maintenance is required. This is also useful for bearing isolation from damaging product or temperature extremes. Pedestals can
also be ordered on other endplate styles.

Conveyor Eng. & Mfg. 1999

51

Conveyor Eng. & Mfg.

END PLATE
U-TROUGH
D
L

L/2

C
K

N BOLTS

M BOLTS

CEF w/ foot

CE w/o foot

Size

Shaft
Dia.

Part #
(CE w/o feet)

D(Ball)

D(Roller)

6
9
9
10
10
12
12
12
14
14
16
18
18
20
20
24
24
30
30
36
36

1 1/2
1 1/2
2
1 1/2
2
2
2 7/16
3
2 7/16
3
3
3
3 7/16
3
3 7/16
3 7/16
3 15/16
3 7/16
3 15/16
3 15/16
4 7/16

CEF6112
CEF9112
CEF92
CEF10112
CEF102
CEF122
CEF122716
CEF123
CEF142716
CEF143
CEF163
CEF183
CEF183716
CEF203
CEF203716
CEF243716
CEF2431516
CEF303716
CEF3031516
CEF3631516
CEF364716

4 1/2
6 1/8
6 1/8
6 3/8
6 3/8
7 3/4
7 3/4
7 3/4
9 1/4
9 1/4
10 5/8
12 1/8
12 1/8
13 1/2
13 1/2
16 1/2
16 1/2
19 3/4
19 3/4
24
24

5 5/8
7 7/8
7 7/8
8 7/8
8 7/8
9 5/8
9 5/8
9 5/8
10 7/8
10 7/8
12
13 3/8
13 3/8
15
15
18 1/8
18 1/8
21 1/2
21 1/2
26
26

2 13/16
2 7/8
3
2 7/16
3
3
3 5/8
4
3 11/16
4 1/16
4 1/16
4 1/8
4 3/8
4 1/8
4 3/8
4 3/8
**
**
**
**
**

4 5/16
4 3/8
4 1/2
4 3/8
4 1/2
4 1/2
5 1/16
5 7/16
5 1/8
5 1/2
5 1/2
5 9/16
6 1/4
5 9/16
6 1/4
6 1/4
7 1/2
**
**
**
**

1 1/2
1 5/8
1 5/8
1 3/4
1 3/4
2
2
2
2
2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2

8 1/8
9 3/8
9 3/8
9 1/2
9 1/2
12 1/4
12 1/4
12 1/4
13 1/2
13 1/2
14 7/8
16
16
19 1/4
19 1/4
20
20
24
24
27(+8)
27(+8)

1
1 1/2
1 1/2
1 3/4
1 3/4
1 5/8
1 5/8
1 5/8
1 5/8
1 5/8
2
2
2
2 1/4
2 1/4
2 1/2
2 1/2
2 3/4
2 3/4
2 3/4
2 3/4

1 3/4
2 5/8
2 5/8
2 7/8
2 7/8
2 3/4
2 3/4
2 3/4
2 7/8
2 7/8
3 1/4
3 1/4
3 1/4
3 3/4
3 3/4
4 1/8
4 1/8
4 3/8
4 3/8
4 3/8
4 3/8

3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2

9 7/8
13 1/2
13 1/2
14 1/2
14 1/2
17 1/2
17 1/2
17 1/2
19 1/2
19 1/2
21 1/2
24 1/2
24 1/2
26 1/2
26 1/2
30 1/2
30 1/2
37 1/2
37 1/2
43 3/4
43 3/4

M
N
(Bolt) (Bolt)
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
1(4)
1(4)

3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8

Wt.
(lb)
7
17
17
20
20
28
28
28
43
43
55
81
81
98
98
134
134
186
186
350
350

*Varies by seal and bearing options consult Conveyor Eng. & Mfg. Co.
Consult Conveyor Eng & Mfg. Co for larger sizes

52

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

END PLATES
U-TROUGH PEDESTAL BEARING
D
N BOLTS

C
K

H
F

M BOLTS

Size

Shaft
Dia.

Part #
End Plate

D**

Wt.
(lb)

6
9
9
10
10
12
12
12
14
14
16
18
18
20
20
24
24
30
30
36
36

1 1/2
1 1/2
2
1 1/2
2
2
2 7/16
3
2 7/16
3
3
3
3 7/16
3
3 7/16
3 7/16
3 15/16
3 7/16
3 15/16
3 15/16
4 7/16

CEFP6112
CEFP9112
CEFP92
CEFP10112
CEFP102
CEFP122
CEFP122716
CEFP123
CEFP142716
CEFP143
CEFP163
CEFP183
CEFP183716
CEFP203
CEFP203716
CEFP243716
CEFP2431516
CEFP303716
CEFP3031516
CEFP3631516
CEFP364716

4 1/2
6 1/8
6 1/8
6 3/8
6 3/8
7 3/4
7 3/4
7 3/4
9 1/4
9 1/4
10 5/8
12 1/8
12 1/8
13 1/2
13 1/2
16 1/2
16 1/2
19 3/4
19 3/4
24
24

5 5/8
7 7/8
7 7/8
8 7/8
8 7/8
9 5/8
9 5/8
9 5/8
10 7/8
10 7/8
12
13 3/8
13 3/8
15
15
18 1/8
18 1/8
21 1/2
21 1/2
26
26

6 3/16
6 3/16
7 1/2
6 3/16
7 1/2
7 1/2
8 3/4
9 3/4
8 3/4
9 3/4
9 3/4
9 3/4
11 1/2
9 3/4
11 1/2
11 1/2
12 3/4
11 1/2
12 3/4
12 3/4
13 1/2

11/2
1 5/8
1 5/8
1 3/4
1 3/4
2
2
2
2
2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2

8 1/8
9 3/8
9 3/8
9 1/2
9 1/2
12 1/4
12 1/4
12 1/4
13 1/2
13 1/2
14 7/8
16
16
19 1/4
19 1/4
20
20
24
24
27(+8)
27(+8)

1
11/2
11/2
13/4
13/4
15/8
15/8
15/8
15/8
15/8
2
2
2
2 1/4
2 1/4
2 1/2
2 1/2
2 3/4
2 3/4
2 3/4
2 3/4

1 3/4
2 5/8
2 5/8
2 7/8
2 7/8
2 3/4
2 3/4
2 3/4
2 7/8
2 7/8
3 1/4
3 1/4
3 1/4
3 3/4
3 3/4
4 1/8
4 1/8
4 3/8
4 3/8
4 3/8
4 3/8

3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2

9 7/8
13 1/2
13 1/2
14 1/2
14 1/2
17 1/2
17 1/2
17 1/2
19 1/2
19 1/2
21 1/2
24 1/2
24 1/2
26 1/2
26 1/2
30 1/2
30 1/2
37 1/2
37 1/2
43 3/4
43 3/4

3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
1(4)
1(4)

3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8

11
25
27
29
31
38
41
44
60
64
76
108
117
128
137
178
185
244
252
441
449

** DDimension shown is adequate length for waste pack seal clearance. For clearance of packing gland seals, dimension must be increased.
Consult Conveyor Eng & Mfg. Co for larger sizes

Conveyor Eng. & Mfg. 1999

53

Conveyor Eng. & Mfg.

END PLATE
FLARED TROUGH
L

C
N - BOLTS

H
M - BOLTS

CEV w/o foot

CEFV w/ foot

Size

Shaft Dia.

Part #
(w/o feet)

Part #
(w/ feet)

D (Ball)

D (Roller)

6
9
9
10
10
12
12
12
14
14
16
18
18
20
20
24
24

1 1/2
1 1/2
2
1 1/2
2
2
3
2 7/16
2 7/16
3
3
3
3 7/16
3
3 7/16
3 7/16
3 15/16

CEV6112
CEV9112
CEV92
CEVP10112
CEVP102
CEV122
CEV123
CEV122716
CEV142716
CEV143
CEV163
CEV183
CEV183716
CEV203
CEV203716
CEV243716
CEV2431516

CEFV6112
CEFV9112
CEFV92
CEFVP10112
CEFVP102
CEFV122
CEFV123
CEFV122716
CEFV142716
CEFV143
CEFV163
CEFV183
CEFV183716
CEFV203
CEFV203716
CEFV243716
CEFV2431516

7
9
9
9 1/2
9 1/2
10
10
10
11
11
11 1/2
12 1/8
12 1/8
13 1/2
13 1/2
16 1/2
16 1/2

5 5/8
7 7/8
7 7/8
8 7/8
8 7/8
9 5/8
9 5/8
9 5/8
10 7/8
10 7/8
12
13 3/8
13 3/8
15
15
18 1/8
18 1/8

2 13/16
2 7/8
3
6 3/16
7 1/2
3
4
3 5/8
3 11/16
4 1/16
4 1/16
4 1/8
4 3/8
4 1/8
4 3/8
4 3/8
--

4 5/16
4 3/8
4 1/2
6 3/16
7 1/2
4 1/2
5 7/16
5 1/16
5 1/8
5 1/2
5 1/2
5 9/16
6 1/4
5 9/16
6 1/4
6 1/4
7 1/2

1 1/2
1 5/8
1 5/8
1 3/4
1 3/4
2
2
2
2
2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2

Size

Weight

6
9
9
10
10
12
12
12
14
14
16
18
18
20
20
24
24

8 1/8
9 3/8
9 3/8
9 1/2
9 1/2
12 1/4
12 1/4
12 1/4
13 1/2
13 1/2
14 7/8
16
16
19 1/4
19 1/4
20
20

1
1 1/2
1 1/2
1 3/4
1 3/4
1 5/8
1 5/8
1 5/8
1 5/8
1 5/8
2
2
2
2 1/4
2 1/4
2 1/2
2 1/2

1 3/4
2 5/8
2 5/8
2 7/8
2 7/8
2 3/4
2 3/4
2 3/4
2 7/8
2 7/8
3 1/4
3 1/4
3 1/4
3 3/4
3 3/4
4 1/8
4 1/8

3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8

16 5/8
21 1/4
21 1/4
23 1/2
23 1/2
26 3/8
26 3/8
26 3/8
28 3/8
28 3/8
32 1/2
36 1/2
36 1/2
39 1/2
39 1/2
45 1/2
45 1/2

3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4

3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8

11
25
25
33
33
36
36
36
54
54
67
96
96
116
116
159
159

Consult Conveyor Eng & Mfg. Co for larger sizes

54

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

END PLATES
FLARED TROUGH PEDESTAL BEARING

C
N - BOLTS

H
M - BOLTS

Size

Shaft Dia.

Part #
(w/ feet)

D**

6
9
9
10
10
12
12
12
14
14
16
18
18
20
20
24
24

1 1/2
1 1/2
2
1 1/2
2
2
2 7/16
3
2 7/16
3
3
3
3 7/16
3
3 7/16
3 7/16
3 15/16

CEFVP6112
CEFVP9112
CEFVP92
CEFVP10112
CEFVP102
CEFVP122
CEFVP122716
CEFVP123
CEFVP142716
CEFVP143
CEFVP163
CEFVP183
CEFVP183716
CEFVP203
CEFVP203716
CEFVP243716
CEFVP2431516

7
9
9
9 1/2
9 1/2
10
10
10
11
11
11 1/2
12 1/8
12 1/8
13 1/2
13 1/2
16 1/2
16 1/2

5 5/8
7 7/8
7 7/8
8 7/8
8 7/8
9 5/8
9 5/8
9 5/8
10 7/8
10 7/8
12
13 3/8
13 3/8
15
15
18 1/8
18 1/8

6 3/16
6 3/16
7 1/2
6 3/16
7 1/2
7 1/2
8 3/4
9 3/4
8 3/4
9 3/4
9 3/4
9 3/4
11 1/2
9 3/4
111/2
11 1/2
12 3/4

1 1/2
1 5/8
1 5/8
1 3/4
1 3/4
2
2
2
2
2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2

8 1/8
9 3/8
9 3/8
9 1/2
9 1/2
12
12 1/4
12 1/4
13 1/2
13 1/2
14 7/8
16
16
19 1/4
19 1/4
20
20

Size

Weight

6
9
9
10
10
12
12
12
14
14
16
18
18
20
20
24
24

1
1 1/2
1 1/2
1 3/4
1 3/4
1 5/8
1 5/8
1 5/8
1 5/8
1 5/8
2
2
2
2 1/4
2 1/4
2 1/2
2 1/2

1 3/4
2 5/8
2 5/8
2 7/8
2 7/8
2 3/4
2 3/4
2 3/4
2 7/8
2 7/8
3 1/4
3 1/4
3 1/4
3 3/4
3 3/4
4 1/8
4 1/8

3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8

16 5/8
21 1/4
21 1/4
23 1/2
23 1/2
26 3/8
26 3/8
26 3/8
28 3/8
28 3/8
32 1/2
36 1/2
36 1/2
39 1/2
39 1/2
45 1/2
45 1/2

3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4

3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8

15
35
35
45
45
46
49
52
71
75
88
123
132
146
155
203
210

** DDimension shown is adequate length for waste pack seal clearance. For clearance of packing gland seals, dimension must be increased.
Consult Conveyor Eng & Mfg. Co for larger sizes

Conveyor Eng. & Mfg. 1999

55

Conveyor Eng. & Mfg.

END PLATE
TUBE TROUGH
L

C
N - BOLTS

M - BOLTS

CEFT w/ foot

CET w/o foot

Size

Shaft
Dia.

Part #
(CET w/o feet)

D (Ball)

D (Roller)

6
9
9
10
10
12
12
12
14
14
16
18
18
20
20
24
24

1 1/2
1 1/2
2
1 1/2
2
2
2 7/16
3
2 7/16
3
3
3
3 7/16
3
3 7/16
3 7/16
3 15/16

CEFT6112
CEFT9112
CEFT92
CEFT10112
CEFT102
CEFT122
CEFT122716
CEFT123
CEFT142716
CEFT143
CEFT163
CEFT183
CEFT183716
CEFT203
CEFT203716
CEFT243716
CEFT2431516

4 7/8
6 7/8
6 7/8
7 3/8
7 3/8
8 5/8
8 5/8
8 5/8
9 5/8
9 5/8
10 5/8
12 1/8
12 1/8
13 1/8
13 1/8
15 1/8
15 1/8

5 5/8
7 7/8
7 7/8
8 7/8
8 7/8
9 5/8
9 5/8
9 5/8
10 7/8
10 7/8
12
13 3/8
13 3/8
15
15
18 1/8
18 1/8

2 13/16
2 7/8
3
2 7/16
3
3
3 5/8
4
3 11/16
4 1/16
4 1/16
4 1/8
4 3/8
4 1/8
4 3/8
4 3/8
-

4 5/16
4 3/8
4 1/2
4 3/8
4 1/2
4 1/2
5 1/16
5 7/16
5 1/8
5 1/2
5 1/2
5 9/16
6 1/4
5 9/16
6 1/4
6 1/4
7 1/2

8 1/8
9 3/8
9 3/8
9 1/2
9 1/2
12 1/4
12 1/4
12 1/4
13 1/2
13 1/2
14 7/8
16
16
19 1/4
19 1/4
20
20

1
1 1/2
1 1/2
1 3/4
1 3/4
1 5/8
1 5/8
1 5/8
1 5/8
1 5/8
2
2
2
2 1/4
2 1/4
2 1/2
2 1/2

1 3/4
2 5/8
2 5/8
2 7/8
2 7/8
2 3/4
2 3/4
2 3/4
2 7/8
2 7/8
3 1/4
3 1/4
3 1/4
3 3/4
3 3/4
4 1/8
4 1/8

3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8

9 3/4
13 3/4
13 3/4
14 3/4
14 3/4
17 1/4
17 1/4
17 1/4
19 1/4
19 1/4
21 1/4
24 1/4
24 1/4
26 1/4
26 1/4
30 1/4
30 1/4

M
N
(Bolt) (Bolt)
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4

3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8

Wt.
(lb)
6
16
16
19
19
25
25
25
37
37
46
70
70
84
84
114
114

Consult Conveyor Eng & Mfg. Co for larger sizes

56

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

COVERS

Flanged Cover: Remains flatter between clamps or bolts than the flat cover and seals better.
Sheds water better than the flat cover. Most common. Also available as semi-flanged.

Flat Cover: Required to prevent injury. This cover is not recommended for sealing. Supports
less weight than flanged covers. Works well with spring clamps.

Flared Trough Cover (Flanged): Remains flatter between clamps or bolts than the flat cover
and seals better. Sheds water better than the flat cover.

Hip Roof Cover: recommended for outdoor applications, to shed rain or snow. Also
available for flared trough.

Shroud Cover: For use with standard U-troughs when a tubular trough is needed but can't be
used. For use with covers shown above or independently. Food grade applications may call for
the shroud to be continuously welded to a cover.

Conveyor Eng. & Mfg. 1999

57

Conveyor Eng. & Mfg.

COVERS
FLANGED AND FLAT
(Dimensions shown match U-troughs)

Standard Length

Additional Length Required At


Trough End, On Or Both Ends

Standard Flat

Standard Flange

Sim. Flange

3/4

20

Screw
Dia.

Cover
Thick.

Std. Flat
Part #

Weight
Std. Len.

Std. Flange
Part #

Weight
Std. Len.

Semi-flanged
Part #

Weight
Std. Len.

A*

Standard
Length

14 ga.

CTC614

26

CTC614-F

31

CTC614-S

31

10 1/8

1 1/2

10'-0

12 ga.

CTC612

36

CTC612-F

43

CTC612-S

43

10 1/8

1 1/2

10'-0

14 ga.

CTC914

35

CTC914-F

40

CTC914-S

40

13 3/4

1 5/8

10'-0

12 ga.

CTC912

49

CTC912-F

56

CTC912-S

56

13 3/4

1 5/8

10'-0

10

14 ga.

CTC1014

38

CTC1014-F

43

CTC1014-S

43

14 3/4

1 3/4

10'-0

10

12 ga.

CTC1012

53

CTC1012-F

60

CTC1012-S

60

14 3/4

1 3/4

10'-0

12

14 ga.

CTC1214

55

CTC1214-F

61

CTC1214-S

61

17 3/4

12'-0

12

12 ga.

CTC1212

77

CTC1212-F

85

CTC1212-S

85

17 3/4

12'-0

12

10 ga.

CTC1210

99

CTC1210-F

109

CTC1210-S

109

17 3/4

12'-0

14

14 ga.

CTC1414

55

CTC1414-F

67

CTC1414-S

67

19 3/4

12'-0

14

12 ga.

CTC1412

86

CTC1412-F

94

CTC1412-S

94

19 3/4

12'-0

14

10 ga.

CTC1410

111

CTC1410-F

121

CTC1410-S

121

19 3/4

12'-0

16

12 ga.

CTC1612

86

CTC1612-F

103

CTC1612-S

103

21 3/4

2 1/2

12'-0

16

10 ga.

CTC1610

122

CTC1610-F

132

CTC1610-S

132

21 3/4

2 1/2

12'-0

18

12 ga.

CTC1812

108

CTC1812-F

116

CTC1812-S

116

24 3/4

2 1/2

12'-0

18

10 ga.

CTC1810

139

CTC1810-F

149

CTC1810-S

149

24 3/4

2 1/2

12'-0

20

12 ga.

CTC2012

117

CTC2012-F

125

CTC2012-S

125

26 3/4

2 1/2

12'-0

20

10 ga.

CTC2010

150

CTC2010-F

161

CTC2010-S

161

26 3/4

2 1/2

12'-0

24

12 ga.

CTC2412

135

CTC2412-F

142

CTC2412-S

142

30 3/4

2 1/2

12'-0

24

10 ga.

CTC2410

173

CTC2410-F

183

CTC2410-S

183

30 3/4

2 1/2

12'-0

30

10 ga.

CTC3010

207

CTC3010-F

215

CTC3010-S

215

37 3/4

2 1/2

12'-0

30

3/16

CTC307

288

CTC307-F

300

CTC307-S

300

37 3/4

2 1/2

12'-0

36

10 ga.

CTC3610

241

CTC3610-F

257

CTC3610-S

257

44

2 1/2

12'-0

36

3/16

CTC367

336

CTC367-F

360

CTC367-S

360

44

2 1/2

12'-0

*Inside Dimension
Consult Conveyor Eng & Mfg Co. for larger sizes

58

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

COVERS
HIP ROOF
(Dimensions shown match U-troughs)

3/4

Standard Length

Standard Length

(Double End Cover)

(Single End Cover)

Standard Length

Standard Length

(Intermediate Cover w/ Butt Strap)

(End Cover w/ Butt Strap)

Screw
Dia.

Cover
Thickness

Std. Flange
Description

Weight
Std. Length

A*

Standard
Length

14 ga.

CTC614-R

33

10 1/8

1 1/2

10-0

12 ga.

CTC612-R

46

10 1/8

1 1/2

10-0

14 ga.

CTC914-R

42

13 3/4

1 5/8

10-0

12 ga.

CTC912-R

59

13 3/4

1 5/8

10-0

10

14 ga.

CTC1014-R

45

14 3/4

1 5/8

10-0

10

12 ga.

CTC1012-R

63

14 3/4

1 5/8

10-0

12

14 ga.

CTC1214-R

63

17 3/4

12-0

12

12 ga.

CTC1212-R

88

17 3/4

12-0

14

14 ga.

CTC1414-R

69

19 3/4

12-0

14

12 ga.

CTC1412-R

96

19 3/4

12-0

16

14 ga.

CTC1614-R

75

21 3/4

2 1/2

12-0

16

12 ga.

CTC1612-R

105

21 3/4

2 1/2

12-0

18

12 ga.

CTC1812-R

118

24 3/4

2 1/2

12-0

18

10 ga.

CTC1810-R

151

24 3/4

2 1/2

12-0

20

12 ga.

CTC2012-R

126

26 3/4

2 1/2

12-0

20

10 ga.

CTC2010-R

163

26 3/4

2 1/2

12-0

24

12 ga.

CTC2412-R

144

30 3/4

2 1/2

12-0

24

10 ga.

CTC2410-R

185

30 3/4

2 1/2

12-0

30

10 ga.

CTC3010-R

216

37 3/4

2 1/2

12-0

30

3/16

CTC307-R

302

37 3/4

2 1/2

12-0

36

10 ga.

CTC3610-R

247

44

2 1/2

12-0

36

3/16

CTC367-R

344

44

2 1/2

12-0

*Inside Dimension
Note: On a 36cover the peak clearance is 3 (standard 2)
Consult Conveyor Eng & Mfg Co. for larger sizes

Conveyor Eng. & Mfg. 1999

59

Conveyor Eng. & Mfg.

COVERS
FLANGED AND FLAT
(Dimensions shown match Flared troughs)

3/4
A

Standard Flange
A

A
Standard Length

Standard Flat

Additional Length Required At


Trough End, On Or Both Ends

Screw

Cover

Flared Flat

Weight

Flared Flange

Weight

Dia.

Thickness

Description

Std. Len.

Description

Std. Len

A*

Standard
Length

14 ga.

CTC614-V

44

CTC614-VF

49

14

1 1/2

10'-0

12 ga.

CTC612-V

62

CTC612-VF

69

14

1 1/2

10'-0

14 ga.

CTC914-V

56

CTC914-VF

61

18

1 5/8

10'-0

12 ga.

CTC912-V

79

CTC912-VF

86

18

1 5/8

10'-0

10

14 ga.

CTC1014-V

61

CTC1014-VF

67

20

1 5/8

10'-0

10

12 ga.

CTC1012-V

86

CTC1012-VF

93

20

1 5/8

10'-0

12

14 ga.

CTC1214-V

84

CTC1214-VF

90

22

12'-0

12

12 ga.

CTC1212-V

117

CTC1212-VF

126

22

12'-0

12

10 ga.

CTC1210-V

150

CTC1210-VF

162

22

12'-0

14

14 ga.

CTC1414-V

90

CTC1414-VF

96

24

12'-0

14

12 ga.

CTC1412-V

126

CTC1412-VF

135

24

12'-0

14

10 ga.

CTC1410-V

162

CTC1410-VF

173

24

12'-0

16

12 ga.

CTC1612-V

143

CTC1612-VF

152

28

2 1/2

12'-0

16

10 ga.

CTC1610-V

184

CTC1610-VF

196

28

2 1/2

12'-0

18

12 ga.

CTC1812-V

161

CTC1812-VF

170

31

2 1/2

12'-0

18

10 ga.

CTC1810-V

207

CTC1810-VF

219

31

2 1/2

12'-0

20

12 ga.

CTC2012-V

174

CTC2012-VF

183

34

2 1/2

12'-0

20

10 ga.

CTC2010-V

224

CTC2010-VF

235

34

2 1/2

12'-0

24

12 ga.

CTC2412-V

201

CTC2412-VF

210

40

2 1/2

12'-0

24

10 ga.

CTC2410-V

258

CTC2410-VF

269

40

2 1/2

12'-0

*Inside Dimension
Consult Conveyor Eng & Mfg Co. for larger sizes

60

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

HANGERS
Style 216
Recommended for conveying cement and other abrasive materials. Non-lubricated hard Iron bearings are primarily used with this style of hanger.

Style 220-QC
Used for mounting on top of the trough flanges and where dust-tight or weather-proof operation is not required.
This type of hanger allows for minimal obstruction of material flow. Can replace bearing without removing top
plate bolts.

Style 230
Same as style 216 except top mounted like style 220.

Style 226-QC
The QC, quick change, configuration of the style 226 hanger allows for bearing change out or replacement with
minimal effort. Separate body and T-bars also allow for easy component change out.

Style 226-FQC
Same as the 226-QC style except modified for a flared trough. Can replace bearing without removing top plate
bolts.

Style 226-T
Same as the 226-CH style except modified for a tube trough.

Style 226-HD-IND
The HD, heavy duty, configuration of the style 226 hanger is designed for the heaviest of applications in sizes 14
to 24 (consult CEMC for sizes larger than 24). The HD hangers utilizes a stainless cast bottom cap for long life
and quick change of bearings.
CEMC also offers an indicator hanger option on the style 226 heavy duty hanger configuration. The indicator option used in conjuction with a special bearing provides an early warning to bearing failure.

Style 226-HDJ
The HDJ, heavy duty junior, configuration of the style 226 hanger is designed for the heaviest of applications in
12" conveyors. The reinforced top cap and single stock body provide exceptional strength in small conveyors
that require heavy duty service.

Conveyor Eng. & Mfg. 1999

61

Conveyor Eng. & Mfg.

HANGERS
STYLE 220 QC HANGER
A

E-BOLTS

Size

Shaft Dia.

Weight

1 1/2

QCCH6220112

9 3/4

4 1/2

1/4

3/8

8 3/4

2 1/2

1 1/2

QCCH9220112

13 1/2

6 1/8

1/4

3/8

12 1/4

2 1/2

QCCH92202

13 1/2

6 1/8

1/4

3/8

12 1/4

2 1/2

11

10

1 1/2

QCCH10220112

14 1/2

6 3/8

1/4

3/8

13 1/4

2 1/2

10

10

QCCH102202

14 1/2

6 3/8

1/4

3/8

13 1/4

2 1/2

12

12

12

2 7/16

Part #

QCCH122202

17 1/2

7 3/4

3/8

1/2

15 3/4

2 1/2

16

QCCH122202716

17 1/2

7 3/4

3/8

1/2

15 3/4

2 1/2

21

QCCH122203

17 1/2

7 3/4

3/8

1/2

15 3/4

2 1/2

28

QCCH142202716

19 1/2

9 1/4

3/8

1/2

17 3/4

2 1/2

26

12

14

2 7/16

14

QCCH142203

19 1/2

9 1/4

3/8

1/2

17 3/4

2 1/2

33

16

QCCH162203

21 1/2

10 5/8

3/8

1/2

19 3/4

2 1/2

39

18

QCCH182203

24 1/2

12 1/8

1/2

5/8

22 1/4

3 1/2

41

18

3 7/16

20

QCCH182203716

24 1/2

12 1/8

1/2

5/8

22 1/4

3 1/2

49

QCCH202203

26 1/2

13 1/2

1/2

5/8

24 1/4

3 1/2

43

20
24

3 7/16

QCCH202203716

26 1/2

13 1/2

1/2

5/8

24 1/4

3 1/2

51

3 7/16

QCCH242203716

30 1/2

16 1/2

1/2

5/8

28 1/4

3 1/2

57

24

3 15/16

QCCH2422031516

30 1/2

16 1/2

1/2

5/8

28 1/4

3 1/2

65

30

3 7/16

QCCH302203716

37 1/2

19 3/4

5/8

3/4

35

129

30

3 15/16

QCCH3022031516

37 1/2

19 3/4

5/8

3/4

35

145

36

3 15/16

QCCH3622031516

43 1/2

24

5/8

3/4

41

151

36

4 7/16

QCCH362204716

43 1/2

24

5/8

3/4

41

153

Consult Conveyor Eng & Mfg. Co for larger sizes

62

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

HANGERS
STYLE 226 FLARED

C
A
G

E-BOLTS

F
B

Size

Shaft Dia.

Part #

J (Slot)

Weight

1 1/2

QCCH6226112V

14

1/4

3/8

7/8

2 1/2

7/16 x 7/8

1 1/2

QCCH9226112V

18

1/4

3/8

7/8

2 1/2

7/16 x 7/8

QCCH92262V

18

1/4

3/8

7/8

2 1/2

7/16 x 7/8

12

QCCH122262V

22

10

3/8

1/2

1 1/8

2 1/2

9/16 x 1

13

12

2 7/16

QCCH122262716V

22

10

3/8

1/2

1 1/8

2 1/2

9/16 x 1

18

12

QCCH122263V

22

10

3/8

1/2

1 1/8

2 1/2

9/16 x 1

24

14

2 7/16

QCCH142262716V

24

11

3/8

1/2

1 1/8

2 1/2

9/16 x 1

22

14

QCCH142263V

24

11

3/8

1/2

1 1/8

2 1/2

9/16 x 1

29

16

QCCH162263V

28

11 1/2

3/8

1/2

1 1/8

2 1/2

9/16 x 1

34

18

QCCH182263V

31

12 1/8

1/2

5/8

1 1/2

3 1/2

11/16 x 1

35

QCCH182263716V

31

12 1/8

1/2

5/8

1 1/2

3 1/2

11/16 x 1

45

QCCH202263V

34

13 1/2

1/2

5/8

1 1/2

3 1/2

11/16 x 1

41

18

3 7/16

20

20

3 7/16

QCCH202263716V

34

13 1/2

1/2

5/8

1 1/2

3 1/2

11/16 x 1

52

24

3 7/16

QCCH242263716V

40

16 1/2

1/2

5/8

1 1/2

3 1/2

11/16 x 1

63

24

3 15/16

QCCH2422631516V

40

16 1/2

1/2

5/8

1 1/2

3 1/2

11/16 x 1

72

Consult Conveyor Eng & Mfg. Co for larger sizes

Conveyor Eng. & Mfg. 1999

63

Conveyor Eng. & Mfg.

HANGERS
STYLE 226 QUICK CHANGE
C
G

E-BOLTS

Size

Shaft Dia.

Part #

J (Slot)

Weight

1 1/2

QCCH6226112

4 1/2

1/4

3/8

3/4

2 1/2

7/16 x 7/8

6.3

1 1/2

QCCH9226112

10

6 1/8

1/4

3/8

2 1/2

7/16 x 7/8

8.3

QCCH92262

10

6 1/8

1/4

3/8

2 1/2

7/16 x 7/8

8.5

10

1 1/2

QCCH10226112

11

6 3/8

1/4

3/8

2 1/2

7/16 x 7/8

8.5

10

QCCH102262

11

6 3/8

1/4

3/8

2 1/2

7/16 x 7/8

8.5

12

QCCH122262

13

7 3/4

3/8

1/2

1 1/4

2 1/2

9/16 x 1

13.8

12

2 7/16

QCCH122262716

13

7 3/4

3/8

1/2

1 1/4

2 1/2

9/16 x 1

18.3

12

QCCH122263

13

7 3/4

3/8

1/2

1 1/4

2 1/2

9/16 x 1

18.8

14

2 7/16

QCCH142262716

15

9 1/4

3/8

1/2

1 3/8

2 1/2

9/16 x 1

20

14

QCCH142263

15

9 1/4

3/8

1/2

1 3/8

2 1/2

9/16 x 1

20

16

QCCH162263

17

10 5/8

3/8

1/2

1 3/8

2 1/2

9/16 x 1

26

18

QCCH182263

19

12 1/8

1/2

5/8

1 5/8

3 1/2

11/16 x 1

35.5

18

3 7/16

QCCH182263716

19

12 1/8

1/2

5/8

1 5/8

3 1/2

11/16 x 1

46

20

QCCH202263

21

13 1/2

1/2

5/8

1 5/8

3 1/2

11/16 x 1

37.5

20

3 7/16

QCCH202263716

21

13 1/2

1/2

5/8

1 5/8

3 1/2

11/16 x 1

54.5

24

3 7/16

QCCH242263716

25

16 1/2

1/2

5/8

1 3/4

3 1/2

11/16 x 1

69.3

24

3 15/16

QCCH2422631516

25

16 1/2

1/2

5/8

1 3/4

3 1/2

11/16 x 1

70

30

3 7/16

QCCH302263716

31

19 3/4

1/2

5/8

1 3/4

11/16 x 1

91

30

3 15/16

QCCH3022631516

31

19 3/4

1/2

5/8

1 3/4

11/16 x 1

91

36

3 15/16

QCCH3622631516

37

24

5/8

3/4

2 1/8

13/16 x 1 5/16

162

36

4 7/16

QCCH362264716

37

24

5/8

3/4

2 1/8

13/16 x 1 5/16

183

Consult Conveyor Eng & Mfg. Co for larger sizes

64

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

HANGERS
STYLE 226 HEAVY DUTY
C

E-BOLTS

G
F

D
B

Size

Shaft Dia.

Part #

J (Slot)

Weight

12

HDCH122263*

13

7 3/4

3/8

1/2

1 1/4

2 1/4

9/16 x 1

27

14

HDCH142263

15

9 1/4

3/8

1/2

1 3/8

2 1/2

9/16 x 1

24.3

16

HDCH162263

17

10 5/8

3/8

1/2

1 3/8

2 1/2

9/16 x 1

33

18

HDCH182263

19

12 1/8

1/2

5/8

1 5/8

3 1/2

11/16 x 1

35.5

18

3 7/16

HDCH182263716

19

12 1/8

1/2

5/8

1 5/8

3 1/2

11/16 x 1

49.5

20

HDCH202263

21

13 1/2

1/2

5/8

1 5/8

3 1/2

11/16 x 1

42

20

3 7/16

HDCH202263716

21

13 1/2

1/2

5/8

1 5/8

3 1/2

11/16 x 1

54.5

24

3 7/16

HDCH242263716

25

16 1/2

1/2

5/8

1 3/4

3 1/2

11/16 x 1

65

24

3 15/16

HDCH2422631516

25

16 1/2

1/2

5/8

1 3/4

3 1/2

11/16 x 1

66

30

3 7/16

HDCH302263716

31

19 3/4

1/2

5/8

1 3/4

11/16 x 1

85

30

3 15/16

HDCH3022631516

31

19 3/4

1/2

5/8

1 3/4

11/16 x 1

87

36

3 15/16

HDCH3622631516

37

24

5/8

3/4

2 1/8

13/16 x 1 5/16

133

36

4 7/16

HDCH362264716

37

24

5/8

3/4

2 1/8

13/16 x 1 5/16

160

Consult Conveyor Eng & Mfg. Co for larger sizes


*Different style than shown, see bottom of page 61

STYLE 226-INDICATOR
Available in the HD series of the 226 style hanger is the indicator option. This special hanger used in conjunction with the
indicator hanger bearing will tell you when your hanger bearing needs to be replaced before causing damage to your
trough or screw.
Call Conveyor Eng & Mfg Co. for more information.

Conveyor Eng. & Mfg. 1999

65

Conveyor Eng. & Mfg.

HANGERS
BEARINGS

216 Hanger Type

226 Hanger Type

Shaft Dia.

Style 220/226
Description

Style 216
Description

Bore

Width

1 1/2
2
2 7/16
3
3 7/16
3 15/16
4 7/16

CBX112-*
CBX2-*
CBX2716-*
CBX3-*
CBX3716-*
CBX31516-*
CBX4716-*

CB112-*
CB2-*
CB2716-*
CB3-*
CB3716-*
CB31516-*
-

1 1/2
2
2 7/16
3
3 7/16
3 15/16
4 7/16

2
2
3
3
4
4
5

*Material Types
GR HI ME NY -

BBT - Babbitt
BR - Bronze
CE - Ceramic
ER - Ertalite

Graphite
Hard Iron
Melamine
Nylon

PR RY SY TE -

Plastic Resin
Ryertex
Synthane
Teflon

UH - UHMW
UR - Urathane
WD - Wood

GREASE TUBES

1/8" NPT x 3/8" Lg. Thread


(Typ. Both Ends of Tube)

Hanger Bearing Grease Tube

66

Size

Shaft Dia.

Part #

A (Ridged Cover)

6
9
10
12
14
16
18
20
24
30
36

1 1/2
1 1/2, 2
1 1/2, 2
2, 2 7/16, 3
2 7/16, 3
3
3, 3 7/16
3, 3 7/16
3 7/16, 3 15/16
3 7/16, 3 15/16
3 15/16, 4 7/16

CHGT6
CHGT9
CHGT10
CHGT12
CHGT14
CHGT16
CHGT18
CHGT20
CHGT24
CHGT30
CHGT36

4 1/2
5 3/4
6
7 1/4
8 3/4
9 1/2
11
12 1/2
15 1/4
18 1/2
22 1/2

6
8 3/4
8 3/4
9 1/2
11
12 1/2
13
15 1/4
18 1/2
20 1/2
25 1/2

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

HANGERS
HANGER BEARING SELECTION
Bearing

Available

Max Operating

FDA

Material

Style

Temp (F)

Approved

Lube

Suggested Uses

Comments

Babbit

220, 226

130

No

Self

Grain, Feed, Processing

Bronze

220, 226

200-600

No

Optional

Grain, Feed, Processing

Ceramic

220, 226

1000

Optional

Chemical, Cement

Ertalyte

220, 226

210

Yes

Optional

Food Processing

Graphite

220, 226

750

No

Self

Grain, Feed, Processing

Hard Iron

220, 226, 216

500

No

Optional

Chemical, Cement

Requires Hardened Shafts


Noisy, Slower speeds

Melamine

220, 226

250

Yes

Self

Food

Recommended for Sugar

Nylon

220, 226

160

Available

Optional

Dry Application

Plastic Resin

220, 226

300

Available

Self

Moist Application

300

No

Ryertex

220, 226

Synthane

220, 226

Teflon

220, 226

UHMW

220, 226

Self

Grain, Feed, Processing

Optional

500

Available

Optional

170

Yes

Self

Food

Urethane

220, 226

200

Self

Grain, Feed, Fertilizer

Wood

216, 220, 226

160

Self

Grain, Feed, Fertilizer

High Quality, High load capacity

Recommended for Sugar

Wetted Material - Light Duty

Good in wet applications

General Purpose

Consult Conveyor Eng & Mfg. Co for larger sizes

Style 216

Conveyor Eng. & Mfg. 1999

Style 220/226

67

Conveyor Eng. & Mfg.

INLETS / BOLT PATTERNS


STANDARD INLET & DISCHARGES
B
B

G
H

F
F

H
C

C
D

A (INSIDE)
D

A (INSIDE)

C
C
F
F
F

12 Bolts

20 Bolts

Size

Part #

# Holes

Bolt dia.

Std. Wt.

CI6

10

2 13/16

11/16

12 ga

12

3/8

5.5

CI9

10

13

1/2

10 ga

12

3/8

7.4

10

CI10

11

14 1/4

4 5/16

4 3/8

5/8

10 ga

12

3/8

8.1

12

CI12

13

17 1/4

5 1/8

5 1/4

7/8

10 ga

12

3/8

9.7

14

CI14

15

191/4

3 1/2

3 1/2

3 1/2

7/8

10 ga

20

3/8

11.0

16

CI16

17

21 1/4

3 3/4

7/8

10 ga

20

3/8

12.3

18

CI18

19

24 1/4

4 7/16

4 3/8

4 3/8

1 1/8

10 ga

20

1/2

13.9

20

CI20

21

26 1/4

4 7/8

4 3/4

4 3/4

1 1/8

10 ga

20

1/2

15.2

24

CI24

25

30 1/4

5 5/8

5 5/8

5 1/2

1 1/8

3/16

20

1/2

24.2

30

CI30

31

37 1/4

6 7/8

6 7/8

1 3/8

3/16

20

5/8

29.8

36*

CI36

37

43 1/2

6 3/4

6 3/4

1 1/2

3/16

24

5/8

35.1

*Size 36 has (24) holes equal spaced @ 6-3/4

TUBULAR FLANGES

Screw

Flange

Size

Bolts

(6) 3/8

8 7/8

(8) 3/8

10

12 1/2

10

(8) 3/8

11

13 1/4

12

(8) 1/2

13

15 7/8

14

(8) 1/2

15

17 7/8

16

(8) 5/8

17

20

18

(10) 5/8

19

22

20

(10) 5/8

21

24 3/8

24

(12) 5/8

25

28 1/2

6 Bolts
10 Bolts

8 Bolts

12 Bolts

68

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

INTERNAL COLLARS

Shaft
Diameter
1 1/2
2
2 7/16
3
3 7/16
3 15/16
4 7/16

(2 Bolt)
Part #*
CIC-112
CIC-2
CIC-2716
CIC-3
CIC-3716
CIC-31516
CIC-4716

(3 Bolt)
Part #*

A**

B
(2 Bolt)

B
(3 Bolt)

Hole
Diameter

Coupling
Bolt

CIC-2-3B
CIC-2716-3B
CIC-3-3B
CIC-3716-3B
CIC-31516-3B
CES-4716-3B

1.509
2.009
2.448
3.014
3.452
3.952
4.452

4 3/4
4 3/4
4 7/8
5
7
7
N/A

7 3/4
7 3/4
7 7/8
8
11
11 1/2
11 3/4

17/32
21/32
21/32
25/32
29/32
1 3/16
1 5/16

1/2
5/8
5/8
3/4
7/8
1 1/8
1 1/4

*CIC = Carbon Steel


CICS = Stainless Steel
** Mean Dimension (tolerance variation of up to 0.002

Conveyor Eng. & Mfg. 1999

69

Conveyor Eng. & Mfg.

DISCHARGES
FLUSH DISCHARGES

1/2A

Flush End Spout U-Trough


Size

70

Part #

Trough Thk.

Spout Thk.

CSD612-F

12-10(ga.)

12 ga.

CSD910-F

12-10(ga.)

10 ga.

10

7 1/8

CSD97-F

3/16

3/16

10

7 1/8

10

CSD1010-F

12-10(ga.)

10 ga.

11

7 7/8

10

CSD107-F

3/16

3/16

11

7 7/8

12

CSD1210-F

12-10(ga.)

10 ga.

13

8 7/8

12

CSD127-F

3/16 -1/4

3/16

13

8 7/8

14

CSD1410-F

10(ga.)

10 ga.

15

10 1/8

14

CSD147-F

3/16 -1/4

3/16

15

10 1/8

16

CSD1610-F

10(ga.)

10 ga.

17

11 1/8

16

CSD167-F

3/16 -1/4

3/16

17

11 1/8

18

CSD1810-F

10(ga.)

10 ga.

19

12 3/8

18

CSD187-F

3/16 -1/4

3/16

19

12 3/8

20

CSD2010-F

10(ga.)

10 ga.

21

13 3/8

20

CSD207-F

3/16 -1/4

3/16

21

13 3/8

24

CSD2410-F

10(ga.)

10 ga.

25

15 3/8

24

CSD247-F

3/16 -1/4

3/16

25

15 3/8

30

CSD3010-F

10(ga.)

10 ga.

31

18 3/8

30

CSD307-F

3/16 -1/4

3/16

31

18 3/8

36

CSD3610-F

10(ga.)

10 ga.

37

23

36

CSD367-F

3/16 -1/4

3/16

37

23

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

DISCHARGES
STANDARD DISCHARGE

Fixed Spout (Standard) U-Trough


Size

Trough Thk.

Spout Thk.

Min. B

Weight

CSD612

Part #

12-10(ga.)

12 ga.

CSD910

12-10(ga.)

10 ga.

10

7 1/8

13

CSD97

3/16

3/16

10

7 1/8

18

10

CSD1010

12-10(ga.)

10 ga.

11

7 7/8

16

10

CSD107

3/16

3/16

11

7 7/8

23

12

CSD1210

12-10(ga.)

10 ga.

13

10 1/2

8 7/8

21

12

CSD127

3/16 -1/4

3/16

13

10 1/2

8 7/8

29

14

CSD1410

10(ga.)

10 ga.

15

11 1/2

10 1/8

28

14

CSD147

3/16 -1/4

3/16

15

11 1/2

10 1/8

38

16

CSD1610

10(ga.)

10 ga.

17

13 1/2

11 1/8

29

16

CSD167

3/16 -1/4

3/16

17

13 1/2

11 1/8

40

18

CSD1810

10(ga.)

10 ga.

19

14 1/2

12 3/8

43

18

CSD187

3/16 -1/4

3/16

19

14 1/2

12 3/8

60

20

CSD2010

10(ga.)

10 ga.

21

15 1/2

13 3/8

48

20

CSD207

3/16 -1/4

3/16

21

15 1/2

13 3/8

67

24

CSD2410

10(ga.)

10 ga.

25

17 1/2

15 3/8

63

24

CSD247

3/16 -1/4

3/16

25

17 1/2

15 3/8

87

30

CSD3010

10(ga.)

10 ga.

31

21

18 3/8

87

30

CSD307

3/16 -1/4

3/16

31

21

18 3/8

121

36

CSD3610

10(ga.)

10 ga.

37

25

23

126

36

CSD367

3/16-1/4

3/16

37

25

23

175

Conveyor Eng. & Mfg. 1999

71

Conveyor Eng. & Mfg.

MOUNTING FEET
FLANGE FOOT
G
B

D
A

Screw Dia.

Part #

G Bolts

H Bolts

Weight

CFF6

8 1/8

5 5/8

10

3/16

1 1/2

13/16

3/8

3/8

CFF9

9 3/8

7 7/8

12

3/16

2 1/2

1 5/16

3/8

1/2

10

CFF10

9 1/2

8 7/8

12 3/8

3/16

2 1/2

1 9/16

3/8

5/8

12

CFF12

12 1/4

9 5/8

15

1/4

2 1/2

1 3/8

1/2

5/8

14

CFF14

13 1/2

10 7/8

16 1/2

1/4

2 1/2

1 3/8

1/2

5/8

16

CFF16

14 7/8

12

18

1/4

1 3/4

5/8

5/8

7.5

18

CFF18

16

13 3/8

19 1/8

1/4

1 3/4

5/8

5/8

9.5

20

CFF20

19 1/4

15

22 3/4

1/4

3 1/2

5/8

3/4

12.5

24

CFF24

20

18 1/8

24

1/4

2 1/4

5/8

3/4

14.5

30

CFF30

24

21 1/2

28

3/8

4 1/8

2 1/2

5/8

3/4

34

36

CFF36

*27(+8)

26

42 3/4

3/8

2 1/2

*5/8 (6)

*1(4)

62

*CFF36 requires (4) H bolts and (6) G bolts


Note: Variations which utilize additional flange bolts are available on special order

K
G
B

K
K
D
A

Screw Dia.

Part #

G Bolts

H Bolts

Weight

CFF6

8 1/8

5 5/8

10

3/16

1 1/2

13/16

3/8

3/8

CFF9

9 3/8

7 7/8

12

3/16

2 1/2

1 5/16

3/8

1/2

10

CFF10

9 1/2

8 7/8

12 3/8

3/16

2 1/2

1 9/16

3/8

5/8

12

CFF12

12 1/4

9 5/8

15

1/4

2 1/2

1 3/8

1/2

5/8

14

CFF14

13 1/2

10 7/8

16 1/2

1/4

2 1/2

1 3/8

1/2

5/8

16

CFF16

14 7/8

12

18

1/4

1 3/4

5/8

5/8

7.5

18

CFF18

16

13 3/8

19 1/8

1/4

1 3/4

5/8

5/8

9.5

20

CFF20

19 1/4

15

22 3/4

1/4

3 1/2

5/8

3/4

12.5

24

CFF24

20

18 1/8

24

1/4

2 1/4

5/8

3/4

14.5

30

CFF30

24

21 1/2

28

3/8

4 1/8

2 1/2

5/8

3/4

34

36

CFF36

*27(+8)

26

42 3/4

3/8

2 1/2

*5/8 (6)

*1(4)

62

*CS36 requires (4) H bolts


Note: Variations which utilize additional flange bolts are available on special order

72

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

SHAFT SEALS

Plate Seal: The most common and economical seal. This type seal is designed for mounting between the
trough end and bearing, but may be used separately on pedestal type trough ends. It is normally furnished with
a lip seal, but other types of commercial seal inserts may be used.

Waste Pack Seal: Can be furnished with waste packing or in combination with felt or lip seal. An opening at
the top of the housing facilitates waste repacking. The packing material is partially exposed for oiling. This type
seal is normally installed between the trough end and bearing but may be used separately on pedestal type
trough ends. Frequently, this seal is used like a plate seal (with a lip seal) with no waste packing to prevent
product from reaching the bearing if the lip seal fails.

Split gland Seal: Compression type seals provide for easy replacement and adjustment of packing pressure
on the shaft without removal of the conveyor. Packing pressure may be adjusted by means of the two mounting
bolts. This seal is designed for interior or exterior mounting. It has the advantage over flanged gland seals of
requiring less space. When used on exterior mount, an outboard bearing must be used.

Flanged Gland Seal: The most positive type shaft seal and may be used where pressure requirements are
desired. Mechanical compression of the packing material is accomplished by means of four compression bolts.
Designed for use with outboard bearing ends. Also available in an air purged type.

Purge Seal: Dimensionally similar to Waste Pack Seals. This seal features an advanced sealing method which
is comparable to mechanical seals (due to run-out of conveyor shafts and deflection, mechanical seals are not
typically used on screw conveyors). Best for dry powder materials. Usually used with an air or inert gas purge.

Conveyor Eng. & Mfg. 1999

73

Conveyor Eng. & Mfg.

SHAFT SEALS
PLATE SEAL

B
C
5/8

Shaft Dia.
1 1/2
2
2 7/16
3

Part #

Bolts

Weight

CSF112

5 3/8

4 1/8

1/2

CSF2

6 1/2

5 1/8

4 3/8

5/8

CSF2716

7 3/8

5 7/8

5 3/8

5/8

4
5

CSF3

7 3/4

3/4

3 7/16

CSF3716

9 1/4

6 3/4

3/4

3 15/16

CSF31516

10 1/4

7 3/4

7 3/4

7/8

11

WASTE PACKING SEAL

B
L

C
D

Shaft Dia.
1 1/2
2
2 7/16
3

74

Part #

Bolts

L (Thickness)

Weight

CSW112

5 3/8

4 1/8

1/2

1 3/4

CSW2

6 1/2

5 1/8

4 3/8

5/8

1 3/4

CSW2716

7 3/8

5 7/8

5 3/8

5/8

1 3/4

10

CSW3

7 3/4

3/4

1 3/4

13

3 7/16

CSW3716

9 1/4

6 3/4

3/4

2 1/4

16

3 15/16

CSW31516

10 1/4

7 3/4

7 3/4

7/8

2 1/4

19

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

SHAFT SEALS
SPLIT GLAND SEAL
F
C

D
E
D

Shaft Dia.

Part #

Bolts

CSS112

4 5/8

2 3/16

5 5/8

1 7/16

7/8

1/2

CSS2

5 3/8

2 5/8

6 1/2

1 1/2

7/8

1/2

10

CSS2716

6 1/8

3 1/16

7 5/8

1 5/8

5/8

15

CSS3

6 3/4

3 9/16

8 5/8

1 5/8

5/8

22

3 7/16

CSS3716

8 3/4

4 1/8

10 1/4

2 1/8

1 1/4

3/4

30

3 15/16

CSS31516

8 3/4

4 1/8

10 1/2

1 7/8

1 1/8

3/4

35

1 1/2
2
2 7/16
3

Weight

FLANGED GLAND SEAL

B
E

Shaft Dia.
1 1/2
2
2 7/16
3

Part #

Weight

CSG112

5 3/8

1/2

1/2

11

CSG2

6 1/2

5 1/8

1/2

5/8

11

CSG2716

7 3/8

5 5/8

1/2

5/8

19

CSG3

7 3/4

1/2

3/4

19

3 7/16

CSG3716

9 1/4

6 3/4

1/2

3/4

32

3 15/16

CSG1516

10 1/4

7 3/4

1/2

7/8

39

Conveyor Eng. & Mfg. 1999

75

Conveyor Eng. & Mfg.

BEARINGS

4-Bolt Ball Bearing: The ball bearing is primarily designed for radial loading.

4-Bolt Roller Bearing: The roller bearing is primarily desinged for combined thrust and
radial loading.

2-Bolt Ball Pillow Block Bearing: The ball bearing is primariy designed for radial loading.
This style is useful for bearing isolation from damaging product or temperature extremes

2-Bolt Roller Pillow Block Bearing: The roller bearing is primarily designed for combined
thrust and radial loading. This style is uesful for bearing isolation from damaging product or
temperature extremes.

76

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

BEARINGS
4 BOLT BALL BEARING

A
J

D
C

Shaft

Part #

Bolt Dia.

Weight

1 1/2

SC112

1 11/16

5 1/8

1 7/8

9/16

17/32

2 3/64

1/2

4.8

SCM2

1 27/32

6 1/2

2 5/32

5 1/8

11/16

9/16

2 23/32

5/8

9.3

2 9/32

5 5/8

11/16

9/16

2 31/32

5/8

10.6

2 7/16

SC2716

3
3 7/16

SCM3

2 29/32

7 3/4

3 3/32

7/8

19/32

3 53/64

3/4

21

SCM3716

2 11/32

8 7/16

3 11/32

6 3/4

9/16

4 23/64

3/4

28

4 BOLT ROLLER BEARING

D
B

C
A

Shaft

Part #

Bolt Dia.

Weight

1 1/2

E112

3 1/2

5 3/8

2 31/32

4 1/8

1/8

1 3/16

4 3/16

3 3/16

1/2

11.3

2
2 7/16
3
3 7/16

E2

3 5/8

5 5/8

3 3/32

4 3/8

1/8

1 3/16

4 7/16

3 7/16

1/2

11.4

E2716

4 3/16

6 7/8

3 9/16

5 3/8

3/16

1 1/2

5 5/16

4 1/16

5/8

21.1

E3

4 11/16

7 3/4

3 15/16

3/16

1 5/8

4 23/32

3/4

26.2

5 1/4

9 1/4

4 1/2

1/4

1 7/8

7 1/4

5 17/32

3/4

50.6

E3716

Conveyor Eng. & Mfg. 1999

77

Conveyor Eng. & Mfg.

BEARINGS
2-BOLT BALL PILLOW BLOCK

H
D MIN
C

D MAX
B

Shaft

Part #

D min.

D max.

Bolt Dia.

Weight

1 1/2

P2B-SC112

1 11/16

7 1/4

1 15/16

5 3/16

5 7/8

15/16

4 3/16

2 3/64

2 1/8

1/2

5.4

P2B-SCM2

1 27/32

8 7/8

2 5/16

6 3/8

7 7/16

7/8

4 31/32

2 23/32

2 1/2

5/8

9 1/2

2 3/8

6 7/8

7 15/16

7/8

5 13/32

2 31/32

2 3/4

5/8

10.2

P2B-SCM3

2 11/32

11 3/4

8 1/2

9 1/2

1 1/4

6 31/32

3 53/64

3 1/2

7/8

21

P2B-SCM3716

2 31/64

14

3 3/8

10 5/6

11 5/8

1 5/16

4 23/64

7/8

31.8

2 7/16
3
3 7/16

P2B-SC2716

*Heavy duty applications may require a 4-bolt pillow block bearing

2-BOLT ROLLER PILLOW BLOCK


A

L
H

D MIN

D MAX
B

Shaft

Part #

D min.

D max.

Bolt Dia.

Weight

11/2

P2B-E-108

3 1/8

7 7/8

2 3/8

6 1/8

6 3/8

1 1/4

4 1/4

3 3/16

2 1/8

1/2

10

P2B-E-200

31/2

8 7/8

21/2

6 7/8

7 1/8

1 5/16

4 1/2

3 7/16

2 1/4

5/8

12

2 7/16

P2B-E-207

101/2

2 7/8

8 3/8

8 5/8

1 5/8

5 1/2

4 1/16

2 3/4

5/8

20

P2B-E-300

41/2

12

9 5/16

9 11/16

1 7/8

6 1/4

4 23/32

3 1/8

3/4

27

3 7/16

P2B-E-307

14

31/2

10 13/16

11 3/16

2 1/4

7 1/2

5 17/32

3 3/4

7/8

46

78

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

CLAMPS
B

H
H
L

D
F

G
A

Spring Clamps used for attaching flat or semi-flanged covers


to conveyor troughs. The clamps are riveted to the trough and
will pivot to permit removal of cover.

Clamp
No.

CCA-S1

1 1/4 1 1/4

D
1 3/4

7/16 15/16

G
1/4

Spring Clamps with Brackets are attached to m top side of


semi flanged covers. Plain spring.

1/4 10 Ga.

Note: Unless otherwise specified, clamps are installed at 24

Clamp
No.

CCA-SB

1 1/4

7/8

3/16

1 3/16

1 1/4

Note: Unless otherwise specified, clamps are installed at 24

Heavy-Duty Toggle Clamps are sometimes used for drop bottom screw conveyor troughs. Another popular application is for
trough covers and panels that require easy access and tight
seals. These clamps are readily adjustable to the thickness of
the material. Other types of toggle clamps are available.

Screw Clamps are designed especially for attaching flanged


cover to conveyor troughs, but can also be used for attaching
flat or semi flanged covers.

*Consult Conveyor Eng & Mfg Co. for types and dimensions.

Clamp
No.

Wt.

Note: Unless otherwise specified, clamps are installed on 24


centers.

CCA-C2

2 1/2

1 1/2

3/8

.48

* Available with Thumb Screw also.


Note: Unless otherwise specified, clamps are installed at 24

Conveyor Eng. & Mfg. 1999

79

Conveyor Eng. & Mfg.

FLANGES
TUBE FLANGE AND GASKET

Screw

Flange

Flange

Gasket

Dia.

Part #

Trough Thickness (A)


Thru 10 ga.

3/16-1/4

Thickness

Bolts

Weight

Part #

CFP6T

7 1/4

7 3/8

1 1/4

3/16

3/8

1.8

CFG6T

CFP9T

10 1/4

10 1/2

1 3/4

3/16

3/8

CFG9T

10

CFP10T

11 1/4

11 1/2

1 3/4

3/16

3/8

3.2

CFG10T

12

CFP12T

13 1/4

13 1/2

1/4

1/2

6.9

CFG12T

14

CFP14T

15 1/4

15 1/2

1/4

1/2

7.8

CFG14T

16

CFP16T

17 1/4

17 1/2

1/4

5/8

8.7

CFG16T

18

CFP18T

19 1/4

19 1/2

2 1/2

1/4

5/8

12.3

CFG18T

20

CFP20T

21 1/4

21 1/2

2 1/2

1/4

5/8

13.4

CFG20T

24

CFP24T

25 1/4

25 1/2

2 1/2

1/4

5/8

15.6

CFG24T

Consult Conveyor Eng. & Mfg. Co. for larger sizes

U-TROUGH END FLANGE AND GASKET

B
A/2

Screw

Flange

Trough Thickness (A)

Flange

Gasket

Dia.

Part #

Thru 10 ga.

3/16-1/4

Thickness

Bolts

Weight

Part #

CFP6U

7 1/4

7 3/8

4 1/2

1 1/4

3/16

3/8

1.5

CFG6U

CFP9U

10 1/4

10 1/2

6 1/8

1 3/4

3/16

3/8

2.4

CFG9U

10

CFP10U

11 1/4

11 1/2

6 3/8

1 3/4

3/16

3/8

3.1

CFG10U

12

CFP12U

13 1/4

13 1/2

7 3/4

1/4

1/2

5.5

CFG12U

14

CFP14U

15 1/4

15 1/2

9 1/4

1/4

1/2

6.5

CFG14U

16

CFP16U

17 1/4

17 1/2

10 5/8

1/4

5/8

7.4

CFG16U

18

CFP18U

19 1/4

19 1/2

12 1/8

2 1/2

1/4

5/8

10.4

CFG18U

20

CFP20U

21 1/4

21 1/2

13 1/2

2 1/2

1/4

5/8

11.5

CFG20U

24

CFP24U

25 1/4

25 1/2

16 1/2

2 1/2

1/4

5/8

13.5

CFG24U

30

CFP30U

31 1/4

31 1/2

19 3/4

3 1/8

1/4

5/8

22.6

CFG30U

36

CFP36U

37 1/4

31 1/2

24

3 1/4

3/8

5/8

41.5

CFG36U

80

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

FLANGES
TUBE FLANGE AND GASKET
A

Screw

Flange

Trough Thickness (A)

Flange

Gasket

Dia.

Part #

Thru 10 ga.

3/16-1/4

Thickness

Bolts

Weight

Part #

CFP6V

14 1/4

14 1/2

3/16

3/8

CFG6F

CFP9V

18 1/4

18 1/2

3/16

3/8

CFG9F

10

CFP10V

20 1/4

20 1/2

9 1/2

3/16

3/8

CFG10F

12

CFP12V

22 1/4

22 1/2

10

1/4

1/2

CFG12F

14

CFP14V

24 1/4

24 1/2

11

1/4

1/2

CFG14F

16

CFP16V

28 1/4

28 1/2

11 1/2

1/4

5/8

CFG16F

18

CFP18V

31 1/4

31 1/2

12 1/8

1/4

5/8

10

CFG18F

20

CFP20V

34 1/4

34 1/2

13 1/2

1/4

5/8

11

CFG20F

24

CFP24V

40 1/4

40 1/2

16 1/2

1/4

5/8

13

CFG24F

Consult Conveyor Eng. & Mfg. Co. for larger sizes

Conveyor Eng. & Mfg. 1999

81

Conveyor Eng. & Mfg.

U-TROUGH
BOLT PATTERN

C
C

E
E
F

F
J

J
K
G
G

G
H

6 Hole Flange Pattern

10 Hole Flange Pattern

8 Hole Flange Pattern


C

F
F
J

B
J

K
L

L
M
K

N
G

H
H

18 Hole Flange Pattern

12 Hole Flange Pattern

Screw
Dia.

Dia.

3/8

3/8

10

Bolts
Holes

4 1/2

4 7/16

1 1/32

4 1/8

4 1/16

6 1/8

6 1/4

1 3/16

4 1/8

3 3/4

2 1/32

--

--

--

--

--

--

2 9/16

4 1/8

--

--

--

--

--

3/8

6 3/8

6 5/8

2 1/4

3 1/2

4 3/16

2 17/32

4 1/8

--

--

--

--

--

12

1/2

7 3/4

7 15/16

1 1/2

14

1/2

9 1/4

8 15/16

2 17/32

5 5/16

4 1/16

3 7/8

5 3/16

--

--

--

--

--

5 5/8

5 15/16

5 15/16

--

--

--

--

--

16

5/8

10 5/8

10

18

5/8

10

12 1/8

11

2 5/8

6 3/8

6 5/8

3 3/4

6 5/8

--

--

--

--

--

2 23/32

5 15/16

5 7/8

2 15/16

5 7/8

5 7/8

--

--

--

--

20

5/8

10

13 1/2

12 3/16

2 25/32

6 1/4

6 11/16

3 11/32

6 11/16

6 11/16

--

--

--

--

24

5/8

12

16 1/2

14 1/4

2 25/32

6 1/8

6 5/8

3 5/16

6 5/8

6 5/8

6 5/8

--

--

--

30

5/8

12

19 3/4

17 1/4

2 25/32

7 15/16

7 15/16

7 15/16

--

--

--

36

5/8

18

24

20 1/4

2 9/16

6 1/4

6 1/4

3 1/8

6 1/4

6 1/4

6 1/4

6 1/4

6 1/4

6 1/4

82

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

FLARED TROUGH
BOLT PATTERN

B
F
F
J

G
G

A
A
H

8 Hole Flange Pattern

8 Hole Flange Pattern

C
E

F
J
J
L
K
K
A

10 Hole Flange Pattern

Screw
Dia.

Dia.

3/8

3/8

10

3/8

12
14
16

G
H

Bolts
Holes

4 7/16

6 1/4

1/2
1/2
5/8

10

12 Hole Flange Pattern

7 3/16

1 27/32

5 1/4

5 1/4

2 1/32

--

--

--

9 21/32

1 43/64

2 9/16

--

--

6 5/8

9 1/2

2 7/8

1 3/4

5 1/2

2 3/4

--

--

--

7 15/16

10

11 13/16

1 13/16

5 3/4

5 3/4

3 7/8

5 3/4

--

--

10

8 15/16

11

12 49/64

2 1/16

5 1/8

5 1/8

5 1/8

5 1/8

--

10

11 1/2

14 11/16

2 15/64

5 1/2

5 1/2

3 3/4

5 1/2

5 1/2

--

18

5/8

10

11

12 1/8

16

2 5/8

6 3/16

6 3/16

2 15/16

6 3/16

6 3/16

--

20

5/8

10

12 3/16

13 1/2

17 7/8

2 9/32

3 11/32

--

24

5/8

12

14 1/4

16 1/2

20 61/64

2 15/16

6 7/8

6 7/8

3 5/16

6 7/8

6 7/8

6 7/8

Conveyor Eng. & Mfg. 1999

83

Conveyor Eng. & Mfg.

COUPLING BOLT / BOLT PADS

Length

Incomplete Threads
(Keep Short As Possible)

Torque Specifications for Stainless Steel Fastners


Torque in FT.-LBS.

Bolt Sizes
Shaft Size

Pipe*

Bolt Size

Size

316SS

Grade 5

1 1/2

1/2 x 3

1/2-13UNC

45

75

2 1/2

5/8 x 4

5/8-11UNC

97

150

2 7/16

5/8 x 5

3/4-10UN

132

260

3 1/2

3/4 x 5 1/2

7/8-9UNC

203

430

3 7/16

7/8 x 6

1 1/8-7UNC

432

790

3 15/16

1 1/8 x 8 1/2

1 1/4-7UNC

546

1120

4 7/16

1 1/4 x 8 1/2

1 1/2-8UNC

930

1950

*Pipe size listed is minimum recommended for shaft diameter.


Verify actual pipe size when ordering coupling bolts.

*Torque is offered as a suggested maximum torquing value.

** Bolt length is determined by size and type of pipe being


used and if bolt pads are to be used.

BOLT PAD INFORMATION


Available option on all screws with shaft larger than 1-1/2in diameter to increase performance of the coupling bolts. Constructed from 1/2thick material, the bolt pads increase the bearing surface of the coupling bolts.
General guidelines for determining if bolt pads are recommended:
* not required on 1-1/2shafts
For 2and above, use the following guide:
(Pipe actual OD - Shaft OD) / 2 = Wall Thickness
If wall thickness is less than the bolt diameter, add bolt pads to reduce the load bearing stress on the bolt and pipe.

84

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

SHROUDS
SHROUDED TROUGH COVER

E No. of Spaces @ F

H Bolt Dia.

A/2
45

Screw

Cover

Dia.

Thickness

6
6

Shroud
Part #

Wt.

14 ga.

CTS614

4 1/2

12

3/4

3/8

12 ga.

CTS612

4 1/2

12

3/4

3/8

14 ga.

CTS914

10

6 1/8

18

7/8

3/8

12 ga.

CTS912

10

6 1/8

18

7/8

3/8

13

10 ga.

CTS910

10

6 1/8

18

7/8

3/8

16

10

14 ga.

CTS1014

11

6 3/8

20

2 1/2

7/8

3/8

10

10

12 ga.

CTS1012

11

6 3/8

20

2 1/2

7/8

3/8

14

10

10 ga.

CTS1010

11

6 3/8

20

2 1/2

7/8

3/8

18

12

14 ga.

CTS1214

13

7 3/4

24

1 1/8

3/8

14

12

12 ga.

CTS1212

13

7 3/4

24

1 1/8

3/8

20

12

10 ga.

CTS1210

13

7 3/4

24

1 1/8

3/8

25

14

14 ga.

CTS1414

15

9 1/4

28

3 1/2

1 1/8

3/8

22

14

12 ga.

CTS1412

15

9 1/4

28

3 1/2

1 1/8

3/8

31

14

10 ga.

CTS1410

15

9 1/4

28

3 1/2

1 1/8

3/8

39

16

12 ga.

CTS1612

17

10 5/8

32

1 1/8

3/8

40

16

10 ga.

CTS1610

17

10 5/8

32

1 1/8

3/8

51

18

12 ga.

CTS1812

19

12 1/8

36

4 1/2

1 3/8

3/8

51

18

10 ga.

CTS1810

19

12 1/8

36

4 1/2

1 3/8

3/8

65

20

10 ga.

CTS2010

21

13 1/2

40

1 3/8

3/8

81

20

3/16

CTS207

21

13 1/2

40

1 3/8

3/8

113

24

3/16

CTS247

25

16 1/2

48

1 3/8

3/8

159

30

10 ga.

CTS3010

31

19 3/4

60

10

1 3/8

1/2

183

30

3/16

CTS307

31

19 3/4

60

10

1 3/8

1/2

256

36

10 ga.

CTS3610

37

24

72

4 1/2

10 1/2

1 3/8

1/2

240

36

3/16

CTS367

37

24

72

4 1/2

10 1/2

1 3/8

1/2

336

36

1/4

CTS363

37

24

72

4 1/2

10 1/2

1 3/8

1/2

447

Conveyor Eng. & Mfg. 1999

85

Conveyor Eng. & Mfg.

GATES
PNEUMATIC SLIDE GATE

A
NPT (2)

Size

Trough Thk.

Spout Thk.

Part #

Min. B

12-10(ga.)

12 ga.

CDP612

25

Weight
32

12-10(ga.)

10 ga.

CDP910

10

7 1/8

10 1/8

33

30+

3/16

3/16

CDP97

10

7 1/8

10 1/8

33

30+

10

12-10(ga.)

10 ga.

CDP1010

11

7 7/8

10 7/8

35 1/2

33+

10

3/16

3/16

CDP107

11

7 7/8

10 7/8

35 1/2

33+

12

12-10(ga.)

10 ga.

CDP1210

13

10 1/2

8 7/8

11 7/8

40 1/2

40+

12

3/16-1/4

3/16

CDP127

13

10 1/2

8 7/8

11 7/8

40 1/2

40+

14

10(ga.)

10 ga.

CDP1410

15

11 1/2

10 1/8

13 1/8

45 1/2

50+

14

3/16-1/4

3/16

CDP147

15

11 1/2

10 1/8

13 1/8

45 1/2

50+

16

10(ga.)

10 ga.

CDP1610

17

13 1/2

11 1/8

14 1/8

50 1/2

55+

16

3/16-1/4

3/16

CDP167

17

13 1/2

11 1/8

14 1/8

50 1/2

55+

18

10(ga.)

10 ga.

CDP1810

19

14 1/2

12 3/8

15 3/8

55 1/2

65+

18

3/16-1/4

3/16

CDP187

19

14 1/2

12 3/8

15 3/8

55 1/2

65+

20

10(ga.)

10 ga.

CDP2010

21

15 1/2

13 3/8

16 3/8

60 1/2

75+

20

3/16-1/4

3/16

CDP207

21

15 1/2

13 3/8

16 3/8

60 1/2

75+

24

10(ga.)

10 ga.

CDP2410

25

17 1/2

15 3/8

18 3/8

69 1/2

100+

24

3/16-1/4

3/16

CDP247

25

17 1/2

15 3/8

18 3/8

69 1/2

100+

30

10(ga.)

10 ga.

CDP3010

31

21

18 3/8

21 1/4

88 7/8

125+

30

3/16-1/4

3/16

CDP307

31

21

18 3/8

21 5/16

88 7/8

125+

36

10(ga.)

10 ga.

CDP3610

37

25

23

28

103 7/8

150+

36

3/16-1/4

3/16

CDP367

37

25

23

28 1/16

103 7/8

150+

Dimensions on gates are subject to change and will cary according to actuation methods. Dimensions shown for general reference only.
Contact Conveyor Eng. & Mfg. Co. for precise measurements.

86

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

GATES
RACK AND PINIONPNEUMATIC SLIDE GATE

E
H

Size

Part #

Min. B

Trough Thk. Spout Thk.


12-10(ga.)

12 ga.

CRP612

8 1/4

19 1/4

8 1/2

H
8

12-10(ga.)

10 ga.

CRP910

10

7 1/8

12 1/8

23 3/4

10

9 1/2

3/16

3/16

CRP97

10

7 1/8

12 1/8

23 3/4

10

9 1/2

10

12-10(ga.)

10 ga.

CRP1010

11

7 7/8

12 7/8

25 1/4

10 1/2

10 1/8

10

3/16

3/16

CRP107

11

7 7/8

12 7/8

25 1/4

10 1/2

10 1/8

12

12-10(ga.)

10 ga.

CRP1210

13

10 1/2

8 7/8

13 7/8

28 1/4

11 1/2

11-5/8

12

3/16-1/4

3/16

CRP127

13

10 1/2

8 7/8

13 7/8

28 1/4

11 1/2

11 5/8

14

10(ga.)

10 ga.

CRP1410

15

11 1/2

10 1/8

15 1/8

31 1/4

12 1/2

12 5/8

14

3/16-1/4

3/16

CRP147

15

11 1/2

10 1/8

15 1/8

31 1/4

12 1/2

12 5/8

16

10(ga.)

10 ga.

CRP1610

17

13 1/2

11 1/8

16 1/8

34 1/4

13 1/2

13 5/8

16

3/16-1/4

3/16

CRP167

17

13 1/2

11 1/8

16 1/8

34 1/4

13 1/2

13 5/8

18

10(ga.)

10 ga.

CRP1810

19

14 1/2

12 3/8

17 3/8

37 1/4

14 1/2

15 1/8

18

3/16-1/4

3/16

CRP187

19

14 1/2

12 3/8

17 3/8

37 1/4

14 1/2

15 1/8

20

10(ga.)

10 ga.

CRP2010

21

15 1/2

13 3/8

18 3/8

40 1/4

15 1/2

16 1/8

20

3/16-1/4

3/16

CRP207

21

15 1/2

13 3/8

18 3/8

40 1/4

15 1/2

16 1/8

24

10(ga.)

10 ga.

CRP2410

25

17 1/2

15 3/8

20 3/8

46 1/4

17 1/2

18 1/8

24

3/16-1/4

3/16

CRP247

25

17 1/2

15 3/8

20 3/8

46 1/4

17 1/2

18 1/8

30

10(ga.)

10 ga.

CRP3010

31

21

18 3/8

23 3/8

54 5/8

18 1/2

22

30

3/16-1/4

3/16

CRP307

31

21

18 3/8

23 3/8

54 5/8

18 1/2

22

36

10(ga.)

10 ga.

CRP3610

37

25

23

28

63 5/8

21 1/2

25 3/16

36

3/16-1/4

3/16

CRP367

37

25

23

28

63 5/8

21 1/2

25 3/16

Dimensions on gates are subject to change and will cary according to actuation methods. Dimensions shown for general reference only.
Contact Conveyor Eng. & Mfg. Co. for precise measurements.

Conveyor Eng. & Mfg. 1999

87

Conveyor Eng. & Mfg.

INSTALLATION & MAINTENANCE


Screw conveyors may be ordered either as complete units or by individual components. Complete units are shop assembled,
aligned, and match marked, then disassembled for shipment. This procedure results in significantly lower field installation time.
When ordering only individual components, shipment is made, unless otherwise specified, without assembly bolts. Individual components must be sorted out and aligned in field assembly, resulting in longer installation time.

INSTALLATION
Receiving
Upon delivery, verify the components against the shipping papers and inspect for damage. Minor damage incurred in shipping
(dented trough, bent flanges, etc.) can be readily repaired in the field. If shipment is severely damaged, file a claim with the carrier
immediately.
END OF
TROUGH

USE SHIM WHEN


BUILD-UP IS MORE
THAN 3/16"

ASSEMBLY
1.

The mounting surface for supporting the conveyor must be level and true to avoid distortion in the conveyor. If anchor
bolts are not in line, either move them or slot the conveyor feet or saddle holes. Use shims under feet as required to
achieve correct alignment. Do not proceed with installation of shafts and screws until trough has been completely aligned
and bolted down.

2.

Arrange troughs and trough ends in proper sequence as match marked or per applicable drawing. Assemble with bolts
hand tight. Do not tighten bolts. Do not proceed with installation of shafts and screws until trough has been completely
aligned and bolted down.

3.

Align the inside trough bottom centerlines with a piano wire (or equivalent) and tighten trough and anchor bolts.

4.

Begin assembly of screw sections at the thrust end (the discharge and/or drive end). Insert the drive shaft in the bearing.
Do not tighten bearing set screws until conveyor assembly is complete.

ANGLE
CLIP

"A"

"A"

"A"

J O IN T
"A" Dimension should be equal for
full length of trough, bottom to be
sm o o th thru joint

5.

Place the first screw section in the trough. Install all screw sections such that the flight lugs, if present, are opposite the
carrying side of the flighting. Slide the drive shaft into the screw section and secure tightly with coupling bolts.

Conveyor Eng. & Mfg. 1999

89

Conveyor Eng. & Mfg.

INSTALLATION & MAINTENANCE


6.

Insert the coupling shaft in the other end of the screw and secure tightly with coupling bolts.
Flighting ends approximately
180 degrees apart

Screw Conveyor Coupling


with Hanger

Flighting ends align to produce


a continous carrying surface

Close Coupled
Screw Conveyor

7.

If using hangers, slide the hanger assembly over the end of the coupling shaft. Secure the hanger to the trough with
mounting bolts hand tight.

8.

Insert a coupling shaft into the next screw section and secure tightly with coupling bolts. Place screw in trough so that
there is approximately 180 between ends of flighting of mating screw sections. Slide screw section over the end of the
coupling shaft of the previous screw section. Secure tightly with coupling bolts.

9.

Slide the next hanger assembly over the coupling shaft. Secure hanger to trough with mounting bolts hand tight.

10. Return to the previous hanger assembly. Center the hanger bearing between the screw section pipe ends. Tighten
hanger mounting bolts.
11. Turn screw section by hand to check alignment. If screw does not turn freely, adjust hanger mounting accordingly.
12. Install all of the screw sections (except the last one) by repeating steps 8 thru 11.
13. Slide tail shaft through the end bearing and into the last screw section. Secure tail shaft tightly to last screw section with
coupling bolts.
14. If trough end seals are used, be sure that the shafts are centered within the seal openings.
15. Turn entire screw assembly by hand to check alignment. If binding occurs, loosen and realign hanger bearings accordingly.
16. Tighten bearing set screws at both ends.
17. Make a final check of all bolts to ensure they are tight.
18. Remove any debris from trough (hardware, tools, etc.). Install covers in proper sequence as match marked or per applicable drawing.
Note:

Do not over tighten coupling bolts (see torque specs on page 84).

MAINTENANCE

Establish routine periodic inspection of the entire conveyor to insure continuous maximum operating performance. Keep
the area around the conveyor and drive clean and free of obstacles to provide easy access and avoid functional interference of components.

Lock out power to the motor before attempting any maintenance. Use a padlock and tag on the drives controls. Do not
remove padlock or tag, nor operate conveyor, until all covers and guards are securely in place.

Removing a section or sections of conveyor screw is typically done from the end opposite the drive. Remove trough end,
screw sections, coupling shafts, and hangers until damaged or worn section is removed. Reassemble conveyor in reverse order.

Periodically remove and inspect one of the drive shaft coupling bolts for damage or wear. Also inspect the coupling bolt
hole for damage or wear. The drive shaft coupling bolts transmit more power than successive coupling bolts and will,
therefore, indicate the most severe wear that may be expected.

Lubricate bearings and drive components at the frequency and quantity specified by the individual components manufacturer.
90

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

ENGINEERING DATA
MISCELLANEOUS FORMULAS USEFUL FOR SCREW CONVEYOR APPLICATIONS
CONVERSIONS
VOLUMES
To Convert

To

Multiply By

cubic centimeters
cubic inches

cubic inches
cubic centimeters

0.061024
16.387

liters

cubic feet

0.0353

cubic feet

liters

28.317

cubic feet

cubic inches

1728

cubic feet

bushels

0.8035

bushels

cubic feet

1.2445
0.2642

liters

Gallons (U.S.)

Gallons (U.S.)

liters

3.785

cubic inches

Gallons (U.S.)

0.00433

Gallons (U.S.)

cubic inches

231

cubic feet

Gallons (U.S.)

7.481

Gallons (U.S.)

cubic feet

0.1337

cubic yard

cubic feet

27

cubic feet

cubic yard

0.03704

To Convert

To

Multiply By

kilogram
lbs.

lbs.
kilogram

2.2046
0.4536

short ton

lbs.

2000

WEIGHT

long ton

lbs.

2240

metric ton

lbs.

2204.6

To Convert

To

Multiply By

inches
millimeters

millimeters
inches

25.4
0.03937

meters

inches

39.37

LINEAR

inches

meters

0.0254

meters

feet

3.2808

feet

meters

0.3048

POWER

Conveyor Eng. & Mfg. 1999

To Convert

To

Multiply By

KW (electric)
KW (metric)

HP
HP

1.34102
1.35962

HP

KW (electric)

0.7457

HP

KW (metric)

0.7355

HP

ft.lb./sec.

550

91

Conveyor Eng. & Mfg.

ENGINEERING DATA
MISCELLANEOUS CONVERSION FORMULAS
WATER
weight (lbs.) = cubic feet X 62.4
weight (lbs.) = gallons (US) X 8.337
PSIG = head (in inches) X 0.03609
PSIG = head (in feet) X 0.4331

TEMPERATURE
degrees Celsius = 5/9 X (F - 32)
degrees Fahrenheit = 9/5 X C + 32

HORSEPOWER AND TORQUE


Torque (inch-lbs.) = 63000 X HP / RPM
HP = Torque (inch lbs.) X RPM / 63000

BELT LENGTH (APPROX.) WHEN


SHEAVE DIAMETERS AND
CENTER DISTANCE ARE KNOWN
Belt lgth = 2C + 1.57(D+d) + (D-d)2/4C
where C=center distance of sheaves
D= dia of large sheave
d= dia of small sheave

VOLUME OF FRUSTUM OF CONE


Volume = 0.2618h(D2 + Dd + d2)

Side

Top

(see illustration for above values)


where h= height of frustum
D= dia at large end
d= dia at small end

VOLUME OF FRUSTUM OF PYRAMID


(common hopper design)

Volume = (h/3)(AB + CD + sq.rt.(AB + CD))


(see illustration for above values)
where h= height of frustum
A = width of top
B = length of top
C = width of bottom
D = length of bottom
92

D
B

Side

Top

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

ENGINEERING DATA
PIPE DIMENSIONS AND WEIGHTS

Pipe size
1

1 1/2

2 1/2

3 1/2

10

12

14

Pipe O.D.
1.315

1.900

2.375

2.875

3.500

4.000

4.500

5.563

6.625

8.625

10.750

12.750

14.000

Conveyor Eng. & Mfg. 1999

Schedule

Pipe I.D.

Wall Thk.

Wt./Ft.

Wt./In.

10

1.097

0.109

1.404

0.117

40

1.049

0.133

1.679

0.140

80

0.957

0.179

2.172

0.181

10

1.682

0.109

2.085

0.174

40

1.610

0.145

2.718

0.227

80

1.500

0.200

3.631

0.303

10

2.157

0.109

2.638

0.213

40

2.067

0.154

3.653

0.304

80

1.939

0.218

5.022

0.419

10

2.635

0.120

3.531

0.294

40

2.469

0.203

5.793

0.483

80

2.323

0.276

7.661

0.638

10

3.260

0.120

4.332

0.361

40

3.068

0.216

7.576

0.631

80

2.900

0.300

10.25

0.854

10

3.760

0.120

4.973

0.414

40

3.548

0.226

9.109

0.759

80

3.364

0.318

12.5

1.042

10

4.260

0.120

5.613

0.468

40

4.026

0.237

10.79

0.899

80

3.826

0.337

14.98

1.248

10

5.295

0.134

7.77

0.648

40

5.047

0.258

14.62

1.218

80

4.813

0.375

20.78

1.732

10

6.357

0.134

9.289

0.774

40

6.065

0.280

18.97

1.581

80

5.761

0.432

28.57

2.381

10

8.329

0.148

13.40

1.117

40

7.981

0.322

28.55

2.379

80

7.625

0.500

43.39

3.616

10

10.420

0.165

18.70

1.558

40

10.020

0.365

40.48

3.373

80

9.750

0.500

54.74

4.562

10

12.390

0.180

24.16

2.013

40

12.000

0.375

49.56

4.130

80

11.750

0.500

65.42

5.452

10

13.500

0.250

36.71

3.059

40

13.250

0.375

54.57

4.548

80

12.50

0.750

106.10

8.842

93

Conveyor Eng. & Mfg.

ENGINEERING DATA

Type

Description

1/2 thick ceramic tiles are welded


to carrying side of flighting, gaps
between tiles are filled with chemical and abrasion resistant polymer

Ceramic

Pros

Wire weld is applied to flighting


surface

Iron Based Weld Surfacing

Corrosion Resistant Weld Surfacing (such as Stellite)

Fusion Spray Application


(various materials such as
sten Carbide)

Wire weld is applied to flighting


surface

High temperature gun is used to


fuse hard surface material to screw

Abrasion Resistant Flighting

Screw flighting is made of AR235 or


AR400 steel

Industrial Hard Chromium

Electrolytic application

Nickel Alloy

Tung-

Electroless application

Very high abrasion resistance


under wet or dry conditions
1/2 thick wear surface
High corrosion resistance

Cons

Non-magnetic

Medium Cost
High abrasion resistance under dry conditions
Low to medium cost

Low abrasion resistance under wet conditions

magnetic
High corrosion resistance
Machinable (to obtain high
tolerance on fligt OD)

Very high abrasion resistance

Low cost
Can use in combination with
others
Low sliding friction
High abrasion resistance
Food grade in most cases

Very uniform coating


High abrasion resistance
FDA and USDA approved

Medium abrasion resistance


High cost
Non-magnetic

Medium to high cost


Usually non-magnetic
Low abrasion resistance under wet conditions
Medium abrasion resistance
under dry conditions
High cost
Size restrictions
Non-magnetic
High cost
Screw size restrictions
Difficult to apply to just specific areas
Non-magnetic

TROUGH OPTIONS FOR ABRASION RESISTANCE


Trough made from AR plate
Oversized trough so that conveyed material runs across stationary layer of material
below reducing exposure to trough surface (example: 16screw in 18trough)
Trough linings made of various materials listed in chart above also including
UHMW and other polymers

94

Conveyor Eng. & Mfg. 1999

Conveyor Eng. & Mfg.

INDEX
A
Abrasion Resistance ............ 25
Abrasive Materials ............... 17
Accessories, Cover .............. 79
Air Operated Gates .............. 86
Alloys .................................. 17
Angle Flange Trough ........... 47
Areas and Volumes.............. 92
Assembly Instructions .......... 89-90
B
Bearing Friction Factor ......... 24
Bearing Selection................. 67
Bearings, End ...................... 77-78
Bearings, Hanger ................. 66-67
Bearings, Thrust .................. 77-78
Bolt Pads............................. 84
Bolt Patterns........................ 82-83
Bolt Requirements ............... 84
Bolts, Coupling .................... 84
Bulk Density ........................ 7
Butt Straps .......................... 58-60
C
Capacity Calculation ............ 19
Capacity Factors.................. 19
Capacity Tables ................... 19
Ceramic............................... 94
Channel Trough ................... 49
Clad Pipe ............................ 41
Component Code Index ....... 7
Component Selection........... 26
Contents.............................. 4
Conveyor Layout.................. 31
Conveyor Screws................. 35-40
Coupling Bolts ..................... 84
Coupling Shafts ................... 45
Cover Fasteners .................. 79
Covers, Trough .................... 58-60
D
Design Capacity .................. 19
Design Procedure ................ 6
Diameter Calculation............ 21
Discharges .......................... 70-71
Drive Shafts......................... 43
Drives.................................. 20
Drop Bottom Trough ............ 49
E
End Bearings ....................... 77-78
End Flanges ........................ 80-81
End Shafts........................... 44
End, Plate............................ 52-56
Explosive materials .............. 17
Extreme Temperatures ........ 17

F
Flange Feet .............................. 72
Flared Trough ........................... 48
Finishes, Weld .......................... 34
G
Gates, Slide .............................. 86-87
Grease Tube ............................ 66
H
Hand of Conveyor Screws ......... 35
Hanger Bearings ....................... 66-67
Hangers .................................. 61-65
Hard Surfacing.......................... 94
Helicoid Screws ........................ 38
Horsepower Calculation ............ 23
Horsepower Formula................. 23
I
Inclined Screw Conveyors ......... 17
Inlets ........................................ 68
Installation & Maintenance ........ 89-90
Internal Collars ......................... 69
Introduction............................... 3
L
Layout, Conveyor...................... 31
Liquid Measure ......................... 91
Lubrication................................ 67, 90
Lump Size ................................ 18
M
Maintenance ............................. 89-90
Material Classification ............... 7
Materials Tables ....................... 8-16
Mixing in Transit........................ 17
Modified Flight Factor................ 19
Modified Flighting...................... 32
Motor Selection......................... 25
Mounting Feet........................... 72

S
Saddles ......................................72
Screws, Conveyor .......................35-40
Seals ..........................................74-75
Shaft Diameter Selection.............26, 27
Shaft Seals .................................74-75
Shafts .........................................43-45
Shroud .......................................85
Slide Gates .................................86-87
Special Screws ...........................32
Speed Calculation .......................19
Stainless Steel Finishes ..............34
Sticky Materials...........................17
Support Feet ...............................72
T
Tail Shafts ..................................44
Thrust Bearings ..........................77-78
Torque Formula ..........................28
Torque Ratings ...........................28
Trough, Conveyor .......................46-50
Trough Covers ............................58-60
Trough Ends ...............................52-56
Trough Flanges...........................80-81
Tubular Trough ...........................50
Tubular Bolt Pattern ....................68
U
U-Trough ....................................47
V
Viscous Material .........................17

O
Outboard Bearing Trough Ends . 77-78
P
Paddles .................................... 40
Pedestal Trough Ends............... 53, 55
Pillow Blocks ............................ 78
Pipe Sizes, Dimensions............. 93
Pneumatic Gates ...................... 86
Q
Quick-Release Clamps.............. 79

R
Rack & Pinion Gates ................. 87
Ribbon Screws ......................... 39

Conveyor Eng. & Mfg. 1999

95

Conveyor Eng. & Mfg.

INDEX
Cat. Code
CDS
CES
CC
CCC
CTF
CTA
CTDF
CTV
CEF
CE
CEP
CEV
CEFV
CEFVP
CEVP
CTC
CTT
CTTA
CTTF
CET
CEFT
CTC
CTC-F
CTC-S
CTC-R
CTC-V
CTC-VF
QCCH
QCCHV
QCCH
HDCH
CBX
CB
CHGT
CI
CSD
CSD-F
CIC
CICS
CFF
CS
CSF
CSW
CSS
CSG
SCM
E
P2B-SCM
P2B-E
CFP T
CFP U
CFP V
CCA-S1
CCA-SB
CCA-C2
CRP
CDP
CTS

96

Component ......................................................................................................................... Page


Drive Shaft Standard ............................................................................................................ 43
End Shaft Standard .............................................................................................................. 44
Coupling Shaft...................................................................................................................... 45
Close Coupling Shaft ............................................................................................................ 45
Formed Flange ..................................................................................................................... 47
Angle Flange ........................................................................................................................ 47
Double Formed Flange ......................................................................................................... 47
Flared Trough....................................................................................................................... 48
End Plate for U-Trough w/ Feet ............................................................................................. 52
End Plate for U-Trough w/o Feet ........................................................................................... 52
U-Trough Pedestal Bearing................................................................................................... 53
End Plate for Flared Trough w/o Feet .................................................................................... 54
End Plate for Flared Trough w/ Feet ...................................................................................... 54
End Plate for Flared Trough Pedestal Bearing w/ Feet ........................................................... 55
End Plate for Flared Trough Pedestal Bearing w/o Feet ......................................................... 55
Channel Trough ................................................................................................................... 49
Tubular Trough (Standard).................................................................................................... 50
Tubular Trough (Angle Flanges)............................................................................................ 50
Tubular Trough (Formed Flange) .......................................................................................... 50
End Plate for Tube Trough w/o Feet ...................................................................................... 56
End Plate for Tube Trough w/ Feet........................................................................................ 56
Cover (Standard Flange) ...................................................................................................... 58
Cover (Sim. Flange) ............................................................................................................. 58
Cover (Standard Flat) ........................................................................................................... 58
Cover (Hip Roof) .................................................................................................................. 59
Cover (Flared Flat) ............................................................................................................... 60
Cover (Flared Flange)........................................................................................................... 60
Hanger (220-QC).................................................................................................................. 62
Hanger (226-Flared) ............................................................................................................. 63
Hanger (226 Quick Change) ................................................................................................. 64
Hanger (226-Heavy Duty) ..................................................................................................... 65
Bearing (220/226 Style) ........................................................................................................ 66
Bearing (216 Style)............................................................................................................... 66
Hanger Bearing Grease Tube ............................................................................................... 66
Inlets (Standard)................................................................................................................... 68
Discharge (Standard)............................................................................................................ 71
Discharge (Flush) ................................................................................................................. 70
Internal Collar (Carbon Steel)................................................................................................ 69
Internal Collar (Stainless Steel) ............................................................................................. 69
Mounting Feet (Flange Foot)................................................................................................. 72
Mounting Feet (Saddle) ........................................................................................................ 72
Shaft Seals (Plate Seal)........................................................................................................ 74
Shaft Seals (Waste Packing Seal)......................................................................................... 74
Shaft Seals (Split Gland Seal) ............................................................................................... 75
Shaft Seals (Flanged Gland Seal) ......................................................................................... 75
Bearing (4-Bolt Ball Bearings) ............................................................................................... 77
Bearing (4-Bolt Roller Bearing) ............................................................................................. 77
Bearing (2-Bolt Ball Pillow Block) .......................................................................................... 78
Bearing (2-Bolt Roller Pillow Block) ....................................................................................... 78
Flange (Tube Flange and Gasket)......................................................................................... 80
Flange (U-Trough End Flange and Gasket) ........................................................................... 80
Flange (Flared Plate End Flange and Gasket) ....................................................................... 81
Clamp (Spring) ..................................................................................................................... 79
Clamp (Spring w/ Brackets) .................................................................................................. 79
Clamp (Screw) ..................................................................................................................... 79
Gate (Rack and Pinion Slide Gate)........................................................................................ 87
Gate (Pneumatic Slide Gate) ................................................................................................ 86
Shroud (Shrouded Trough Cover) ......................................................................................... 85

Conveyor Eng. & Mfg. 1999

También podría gustarte