Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Output Shaft
Input Shaft
Countershaft Gear
Countershaft Bushing
Input shaft
Output Gear
Input Pinion
Faceplate
Countershaft Bushing Output Shaft Bushing Input Shaft opening
Input Shaft
Input Pinion (integral with input shaft)
14 teeth Pitch Diam. 1.00 Diametral Pitch - 14 Face width 0.66 Helix angle - 0 Pressure angle - 20
Input shaft has 0.625 OD axial bore on end to accommodate motor output shaft. Input shaft is supported by motor shaft bearings.
0.74 Diam.
2.53
1.06 Diam.
1.88 1.71
Countershaft Assembly
Output Pinion (integral with countershaft)
12teeth Pitch Diam. 0.857 Diametral Pitch - 14 Face width 0.66 Helix angle - 0 Pressure angle - 20
Input gear
38 teeth Pitch Diam. 2.714 Diametral Pitch - 14 Face width 0.31 Helix angle - 0 Pressure angle - 20
Countershaft Assembly
(all dimensions in inches; not to scale)
Centerline of bronze bushing Centerline of output pinion Fillet: 0.03R, both sides Centerline of input gear Woodruff key slot 1/8 wide X 1/2 long.
1.16 2.39 2.77 .0.40 1.64
0.560 Diam.
Output Shaft
(all dimensions in inches; not to scale)
Centerline of bronze support bushing Slot for Woodruff key: 0.188 wide X 0.56 long Centerline of 6202RS5/8 Bearing
3.88 5.20 4.75
0.63 Diam.
3.05 0.87 2.75
Countershaft axis B
A Input pinion 0 X
Input gear