T EDC

Thies Electrical Distributing Co.

Voltage Indicators for Transmission and Distribution Applications Permanently Mounted Live Line Indicators. These Capacitive type Indicators Do Not Need Additional Components to be Installed. They Give a Flashing Signal to Indicate the Presence of Voltages for Systems Starting at 2kv to 220kv

YZ-2

YZ-2/R

YZ-220

T EDC

Thies Electrical Distributing Co.

Indoor Type for Switchgear Applications

YZ-2 / Without Rreflector; Ratings of 2 - 46 KV, Phase to Phase YZ-2/R / Without Reflector; Ratings of 2 - 15 KV, Ph. to Ph. or 15 - 46 KV, Ph. to Ph.

This permanently mounted Safety Device will indicate when a conductor or circuit is energized. This voltage indicator is a protective safety device with ratings of 2-46KV. The presence of voltage will cause a cluster of 3 LEDs to flash in sequence, at a lower voltage range the flash sequence is slower as in the higher voltage range. No setting or adjustment is required. The indicator is dielectrically insulated and will not generate any flashover during the Hi-Pot or Corona Discharge tests. Th YZ-2 Indicator is designed for bolt and nut connection. The overall length is 5.25(135mm) and the round housing is 1.50(40mm) in diameter. A flexible cable lead will allow the unit to be positioned in any angle for perfect visibility. The TEDC TYPE YZ-2 H.V. Indicators are widely used in the Safety of the end-user by Electrical Utilities, specialized Maintenance Personnel and Switchgear Manufacturers.

T EDC

Thies Electrical Distributing Co.

Indoor/Outdoor Type for Multiple Applications

OUTDOOR TYPE HIGH VOLTAGE INDICATORS WITH HIGH BRIGHTNESS LEDS. TWO OPTIONS ARE AVAILABLE FOR CONNECTIONS TO A LIVE PART. RESPECTIVE PART NUMBERS ARE: TED CO. YZ-2 I & O PHASE TO PHASE 2 - 46 KV. TED CO. YZ-69 I & O PHASE TO PHASE 69 - 138 KV.

OUTDOOR TYPE FOR OVERHEAD POWER LINES

YZ-55 rated 15KV - 46-KV. Phase to Ground YZ-110 rated 40KV - 80-KV. Phase to Ground YZ-220 rated 80KV - 140-KV. Phase to Ground

Indicators with special universal type cable clamp for easy connection to the overhead bare lines.