Unit-5
Tutorial Sheet 1
Energy conversion
{A single-phase full bridge inverter is connected to an R-L load. For a dc source voltage of Vs-and olp
frequency f=1/T, obtain expression for load current as a function of time for the first two half cycles of the
lp voltages. Drive also the expression for steady state current forthe first two half cycle.
a) Repeat 1 in case load consist of resistor R and capacitor C in series. b) for R=20ohm and C = 50 mf
‘obtain current expression for i/p voltage of 240 volts and op frequency of 500 Hz
‘A 3-phsse bridge inverter delivers power to a resistive load of a 450 V dc source. For a star connected
load of 10 ohm /phase. Determine for both 180 degree and 120 degree mode a) rms value of load current
b) mms value of thyristor current c) Load power
A single phase bridge inverter fed from 230 V de is connected to load R=10 ohm and L =0.03 H.
determine the power deliver to load in case the inverter is operating at 50 Hz with a) square wave o/p b)
quasi square wave o/p with an on period of 0.5 of a cycle c) two symmetrically spaced pulses /haif cycle
with an on period of 0.5 of a cycle,
Describe the working of a single-phase half bridge inverter, What is its main draw back? Explain how this
draw back is over come
A single phase full bridge inverter may be connected to a load consistent of a) R_b) RL or RLC over
damped c) RLC under damped . for all these loads draw the load voltages and load current waves forms
under steady operating condition discuss the nature of these wave forms. Also indicte the conduction of
the various elements of the inverter okt,
For a single phase full bridge inverter Vs =230 volt de T=1ms . The load consist of RLC in series with R =
1.2 ohm ol = Bohm , ‘/aC=7 ohm a) sketch the wave forms for load voltages Vo = fundamental
components of o/p current lo1, source current Is and voltage across the thyristor 1 , indicate the devices
that conduct durin different intervals of 1 cycle find also the rms value of fundamental component of load
current .Find the power delivered to load due to fundamental component