Está en la página 1de 4

Lubricants UK Ltd Wakefield House Pipers Way Swindon SN3 1RE UK Telephone: +44 (0) 1793 452222

Ireland Unit 1, Site 9 Northwest Business Park Blanchardstown, Ballycoolin Dublin 15 Ireland Telephone: +353 (0) 1885 2100

On

& Off Highway


core product range

Distributor stamp

Engine oils
synthetic
BP Vanellus E8 Ultra 5W-30
Ultimate performance fuel-efficient full synthetic engine oil for use in Euro-Diesel engines operating under demanding conditions. Developed to provide outstanding protection against wear and deposit accumulation as well as the highest levels of soot handling. Approved by major European OEMs for use at their maximum oil drain intervals.

Engine oils
mineral
BP Vanellus E7 Plus 10W-40
Extended drain, high performance diesel engine oil for use in European heavy duty turbo-charged and naturally aspirated diesel engines operating under demanding conditions. Developed to provide high levels of protection against engine wear, good low temperature fluidity, high temperature viscosity retention, and volatility control.
NEW!

BP Vanellus C7 Global 15W-40 *


High performance, long drain engine oil using technology specifically designed to meet the latest ACEA E7 specification for Euro 4 engines, while providing excellent protection against wear and corrosion.

BP Vanellus C5 Global 15W-40


Multigrade oil for diesel and petrol engines for use in mixed commercial fleets. Developed to provide good protection against oil thickening, high temperature engine deposits, sludge build-up, oil degradation and corrosion.

Specs
API CI-4, CF, SL ACEA E3, E5, E7, B3 & B4 Mercedes Benz 228.3 Volvo VDS-3 Cummins 20071, 72, 76, 77, 78 MAN M3275 RVI RLD Mack EO-M Plus DHD-1

Specs
API CG-4, CF/SH ACEA E2, B2 & A2 Mercedes-Benz 228.1 Volvo VDS MAN 271 MTU Type 1 MTU/DDC Category 1 Mack EO-L

Specs
API CF ACEA E4, E5, B3, B4 & A3 Mercedes-Benz 228.5 Volvo VDS-2 Mercedes-Benz 229.1 requirements met RVI RXD DAF Extended drain requirements met

Specs
ACEA E4, E5 & E7* Mercedes-Benz 228.5 Volvo VDS-2 Cummins CES 20072, 77 MAN M3277 Scania LDF RVI RXD MTU Type 3 Mack EO-M Plus

Pack sizes
Bulk; IBC; 208L; 20L; 4x5L

Pack sizes
Bulk; IBC**; 208L; 20L; 4x5L

Pack sizes
Bulk; 208L; 20L
* C7 Global is not compatible with DPF systems. In such cases where ACEA E6 Low SAPS is specified, BP recommends Vanellus Eco 10W-40.

Pack sizes
Bulk; 208L
* Euro 4 compliant

BP Vanellus C6 Global Plus 10W-40


Versatile long drain fuel-efficient diesel and petrol engine oil for use in high performance turbo and non turbocharged heavy duty truck, van and car engines. Designed specifically for use in mixed commercial fleets operating under demanding conditions in all climates. Developed to provide excellent protection against engine wear and deposit accumulation.

BP Vanellus C3 Mono-grades 10W, 20W, 30W & 40W


A range of mono-grade diesel engine oils for use in mixed fleets. Developed to provide engine protection under severe operating conditions, and also meets the transmission oil requirements for some off-highway applications.

BP Vanellus C6 Global 15W-40


Versatile long drain high performance diesel and petrol engine oil for use in turbo and non-turbo charged heavyduty truck, van and car engines. Designed for use in mixed commercial fleets operating under demanding conditions. Developed to provide excellent protection against engine wear and deposit accumulation.

NEW!

BP Vanellus Eco Low SAPS 10W-40*


A new product in the range to meet specific requirements of OEMs who require a Low SAPS lubricant to achieve the emissions legislation, while offering long drain performance and engine wear protection.

Specs all grades


API CF/SF Mercedes-Benz 227.0 Suitable for use against Caterpillar TO-2

Specs
API CH-4/SJ ACEA E3, E5, B3, B4 & A3 Mercedes-Benz 228.3 Volvo VDS-2 Cummins CES 20071, 72, 76, 77 MAN M3275 RVI RLD MTU Type 2 Mack EO-M Plus DAF HP-1, HP-2 ZF TE-ML-03A

Specs
API CH-4/SJ ACEA E3, E5, B3, & A3 Mercedes-Benz 228.3 Volvo VDS-2 Cummins CES 20071, 72, 76, 77 MAN M3275 RVI RLD Mack EO-M Plus

Specs
ACEA E4, E6 Mercedes-Benz 228.5, 228.51 MAN M3477 RVI RXD DAF Extended Drain Requirements Achieved

Specs 20W, 30W & 40W


MAN 270

Specs 30W & 40W


ACEA E1

Specs 30W
Allison C4

Pack sizes
208L
NEW!
* Vanellus Eco can also be used in current engines where ACEA E3/E5 performance is required.

Pack sizes
Bulk; IBC; 208L; 20L

Pack sizes
10W: Bulk; IBC**; 208L; 20L 20W: Bulk; 20L 30W & 40W: Bulk; 208L; 20L**

Pack sizes

BP Vanellus E7 LE 10W-40
High performance diesel engine oil for use in latest Euro 4 generation commercial vehicle engines, while offering excellent performance over extended oil drain intervals in line with OEM recommendations,

Bulk; IBC**; 208L; 20L

BP Vanellus E6 Plus 10W-40


Long drain diesel engine oil for use in heavy duty turbo-charged and naturally aspirated diesel engines operating under demanding conditions, particularly suitable in Scania engines. Developed to provide very good protection against engine wear and deposit accumulation.

Specs
API CF ACEA E4, E5, B3, B4, A3 & E7* Mercedes-Benz 228.5 Volvo VDS-2 Mercedes-Benz 229.1 requirements met MAN M3277 RVI RXD DAF Extended drain requirements met

Specs
API CE ACEA E3, B2 & B4 Mercedes-Benz 228.3 Volvo VDS-2 MAN M3275 Scania LDF RVI RD RLD

Pack sizes
208L
* Euro 4 compliant where Low Saps is not required.

Pack sizes
Bulk; IBC**; 208L
** Restricted pack size. Longer Lead Time on delivery and/or minimum order quantities will apply. Check with Customer Service Unit for possible alternatives. ** Restricted pack size. Longer Lead Time on delivery and/or minimum order quantities will apply. Check with Customer Service Unit for possible alternatives.

Gear and transmission oils


synthetic
BP Energear SHX-M 75W-90
A full synthetic, multi-purpose heavy-duty automotive gear lubricant for use in complete driveline applications requiring either GL-4 or GL-5 performance. Careful selection of special high performance additives and synthetic base fluid technology gives Energear SHX-M exceptional low temperature fluidity whilst maintaining the compatibility and shiftability requirements of most European synchromesh gear boxes.

mineral
BP Energear EP 80W-90 & 85W-140
Designed for use in a wide range of gear units with spur, bevel or helical gear design, including synchronized manual gearboxes, transmissions and axles under moderately severe load and pressure conditions, meeting the requirements of API GL-4 performance. It is applicable equally for passenger cars, light and heavy trucks, agricultural and building machinery, even for topping up well run-in hypoid transmission units.

mineral

continued

BP Energear Limslip 90W


Transmission oil for use in passenger and commercial vehicle axles and differentials with limited slip requirements, to satisfy multi-disc brakes in controlling power flow in final drive units. It combines hypoid and extreme pressure potential, with defined frictional properties to avoid wear and squawk noise of such axles under severe load conditions. Energear Limslip 90 meets API GL-5 requirements.

Pack sizes
Bulk; 208L; 20L

Pack sizes
208L**; 20L

Pack sizes
Bulk; 208L; 20L

BP Energear HT 80W-90
High performance complete driveline gear oil for use in all types of automotive gear boxes, axles and final drives, including hypoid axles and synchronized manual transmissions, and is suitable for commercial vehicles, passenger cars, agricultural and construction equipment. Meets all of the API GL-1, 2, 3, 4 and 5 performance levels.

BP Autran 4 10W, 30W & 50W BP Energear Hypo 80W-90 & 85W-140
Extreme pressure multi-grade gear oils designed for use in hypoid, bevel and spiral gear units, axles and final drives operating under severe conditions and over a wide spectrum of operating temperatures. Through their multigrade viscosity characteristics, they meet the requirements of several automotive manufacturers for cars, vans and commercial trucks or buses. For synchronized manual gearboxes, they should be used only if lubricants of API GL-5 performance level are explicitly recommended for such units. A range of transmission and differential fluids for use in powershift, direct drive transmissions, wet-disc brakes, differentials and final drives meeting Caterpillar TO-4 and Allison C-4 specifications.

Pack sizes
10W: Bulk; 208L 30W: Bulk; 208L 50W: 208L**

Pack sizes
Bulk; 208L; 20L

BP Autran LTF
A full synthetic multi-functional fluid for automatic and power-shift transmissions. It is also suitable for automotive and industrial hydraulic and power steering systems. Autran LTF can be used for extended drain intervals in certain transmissions of commercial trucks and buses.

BP Autran DX III
A premium transmission fluid, designed for use in modern automatic gearboxes, where Dexron IIIG, Ford Mercon and Allison C-4 specification are quoted. It can also be used in powershift transmissions, power steering and hydraulic units.

Pack sizes
Bulk; 208L; 20L 80W-90: 4x5L**

Pack sizes
208L

BP Energear Hypo 90W


Extreme pressure mono-grade gear oil designed for use in hypoid, bevel and spiral gear units, fitted to axles and final drives that are working under severe high speed / low torque and low speed / high torque conditions. Energear Hypo 90 meets the requirements of the major automotive manufacturers. It should only be used in manual synchromesh gearboxes if API GL5 performance level is explicitly recommended.

Pack sizes
Bulk; 20L

BP Autran MBX
A universal type transmission fluid, designed for use in modern automatic gearboxes, where Ford Mercon, Dexron IID, and other specifications are quoted. Autran MBX can also be used in most power steering systems and certain manual gearboxes where an ATF is required.

Pack sizes
Bulk; 208L; 20L; 4x5L

Pack sizes
Bulk; 208L; 20L

** Restricted pack size. Longer Lead Time on delivery and/or minimum order quantities will apply. Check with Customer Service Unit for possible alternatives.

Greases
BP Energrease ZS 00
A semi-fluid, semi-synthetic grease primarily for use in centralised chassis lubrication systems fitted to trucks, buses and off-highway equipment. The lithium/calcium complex formulation contains extreme pressure additives and corrosion and oxidation inhibitors. Approved by several equipment manufacturers. Operating temperature: -40C to 120C. NLGI grade 00.

Bio-degradeable oils
BP Energrease LS-EP 2
Multi-purpose grease for vehicle grease points where a lithium or general purpose grade is required. Its advanced additive system provides protection from wear and corrosion with good resistance to water-washout. Suitable for high load environments in a range of industrial and construction applications. Operating temperature: -25C to 140C. NLGI grade 2.

BP Bioforst 2000
Based on rapeseed oil for the lubrication of chainsaws. Lubrication of chainsaws is by a total loss system and therefore, considerable quantities of lubricants can end up on the ground. Bioforst 2000 is 99% bio-degradeable and quickly breaks down into harmless products by microorganisms in the soil, and can be used all year round even in the harshest of weathers.

Pack sizes
50kg; 15kg

Pack sizes
180kg; 50kg; 12.5kg; 6x3kg; 30x400g

Pack sizes
208L

BP Energrease LC 2
A lithium complex of superior performance to conventional greases. Formulated to provide excellent high temperature performance, it possesses extreme pressure load-carrying properties and contains additives selected to enhance resistance to oxidation, corrosion and wear. This grade can be used in wheel-bearings and other applications with operating temperatures from -30C up to 180C. NLGI grade 2.

BP Energrease LCX 6002


A super premium lithium complex grease, which employs a unique combination of polymeric and EP additives to give the highest levels of extreme pressure wear resistance combined with outstanding water resistance and adhesion. The highly refined mineral base stock has a viscosity of 600 cSt at 40C which gives excellent hydrodynamic protection in slow to medium speed / heavily loaded bearings and contributes to the exceptional water resistance of the product. Suitable in a wide range of demanding off-road applications including conveyors, chassis points, bucket pins, heavily loaded plain bearing in shovel loaders and other mining/construction equipment. Operating temperature: -20C to +160C. NLGI grade 2.

BP Biohyd SE-S 46
Based on saturated synthetic ester for use in any hydraulic system where leakages may pollute natural water and drainage systems, such as earth-moving, agricultural and forestry machinery. Biohyd SE-S 46 is >90% biodegradeable, and contains additives to ensure oxidation and hydrolytic stability.

Pack sizes
208L; 20L

Pack sizes
180kg**; 50kg; 12.5kg; 30x400g

BP Energrease L21 M
A lithium based grease containing molybdenum disulphide. It has excellent load-carrying capability and corrosion resistance. Suitable for general lubrication of vehicles and off-highway equipment and meets the requirements of Caterpillar and Ford. Operating temperature: -25C to 130C. NLGI grade 2.

Pack sizes
180kg**; 50kg**; 15kg**; 30x400g**

Pack sizes
180kg**; 50kg; 12.5kg; 6x3kg**; 30x400g

** Restricted pack size. Longer Lead Time on delivery and/or minimum order quantities will apply. Check with Customer Service Unit for possible alternatives.

También podría gustarte