Está en la página 1de 30

http://www.3d-cad-steelwork.com/Tekla%20Advanced%20Topics.

htm

Changing the pen numbers for colors (line weight)


You can change the pen numbers for the colors to show and print lines with different thicknesses. To change the pen numbers: 1. 2. 3. Open a drawing. Click Drawing File > Print Drawings > Add/Edit > Printer Catalog.... Select a printer instance. To be able to see the changes on the screen, you need to make the changes to the first printer instance on the list. Otherwise, you will see the different line weights only in the printed drawing. Click Color Table. Enter or change a pen number. For example, to get line weight of 2.5 mm, enter 25. Click OK in the Color Table. Click Update in the Printer Catalog. Save the changes when prompted to do so. Close the Printer Catalog. Close the drawing and open it again to see the changes if you changed the pen numbers for the first printer instance. In a color drawing, click Tools > Options and select Use Printer Linewidths, otherwise you cannot see the changes on the screen.

4. 5. 6. 7. 8. 9. 10. 11.

Last week a client asked me to remove the BOM from my assembly drawing and without thinking I opened the Bill Of Material in TplEd and deleted it. So now the BOM is gone from all my assembly drawings and I want it back ! Assuming that the BOM you have is the same as the deleted one it should be no real problem. Make sure your BOM has the same name as the deleted one and put it in your template folder as defined in your advanced settings XS_TEMPLATE_DIRECTORY . If it doesn't appear in your drawing it might be because your drawing layout no longer has the association to the BOM. If this is the case then you will need to add it to your UK-Assembly Layout. Drawings & Reports > Drawing Settings > Drawing Layouts and select your layout select the Table Layout button and then the table layout you use and the Tables button. If you don't see your BOM listed on the left, you don't have it saved in the correct folder. If you see it move it to the right side. Position it relative to another template or the drawing frame. You may need to tweak the position to get it to appear in the proper place on you drawing. Hint: don't close any of the layout dialogues until the template shows up in it's right place. Just hit Apply, Apply, Apply and open your drawing to see. Make corrections as needed and hit Apply, Apply, Apply and reopen your drawing to see the corrections. When you're done close out the dialogues and copy the *.lay file to your firm folder.

To remove "Tekla" from bottom left hand side of drawing

SET XS_PRODUCT_IDENTIFIER=FALSE IN ADVANCED OPTION/DRAWING VIEW


What I am hearing is that if you set it to false or -10.0 and it does not remove it from the drawing you have a bootleg copy of Tekla structure. And also see how I spelled Tekla structure if it spell like this it is a bootleg copy also A legit copy Spells it like Tekla Structure. And you can remove it any time you like & add it back with a simple true or false. Or like James said move it out of the drawing view with -10.0.

In our assembly marks we use an assembly prefix of X for everything. We then have tekla construct the part mark using the position number + the user defined attribute "USER_FIELD_1" + the number one. In the part user defined attribute "user field 1" we put B for beam, C for column, D for diagonal etc. The column marks will look something like 100C1, 101C1 etc. Beam marks will look like 102B1, 103B1. You get the picture. Using X for the assembly prefix for everything prevents tekla from having a column 100C1 and a beam 100B1, which is what would happen if you were to use B or C in the assembly prefix. This would not work for us because we use separate drawings for every piece and you would need two drawings 100, one for 100C1 and one for 100B1. There will only be one X100 and the UDA will decide if it's to be 100B1 or 100C1. Many objects in Tekla have UDAs. You get to them like (UDAs) this. Tekla Structures Logo in drawing title box To not to use this and put in customers name. Double click on it, ignore warning, add single line text(s), save as say company 1. When you want to use this again go project properties / advanced and pick company number. You can also use .jpeg and .giffs the should be put in the same folder as where metsecs and steadmans are.

Column Base Plates I've drawn my inclined column at say 3deg off vertical, how do I get my base plate to remain level with the slab below? The macro automatically puts it on the same slope as the column. Do I need to explode the component and rotate? Is there an easy way? In the General tab, change the "Up direction" from "auto" to +x or +y. GOOD TO KNOW For a 3 holed base plate use 1004 go to bolts, play about with delete hole using 1,2,3 & 4

To reduce the size of a Tekla Model Folder Just delete the dump file

TO CHANGE GRID LABEL COLOUR Tools > Options > Advanced options > Advanced Options > Model view > XS_GRID_COLOR = (YOUR COLOR HERE)

Con 115 through beam

When I recently used this the bolts did not go through all 3 plates. I had select bolts, right click, click bolts, hold down arrow key above Ctrl, pick all 3 plates then hit mouse wheel. Red Cone Have you played with the up direction under the general tab in the macro. Try changing it to + or - x, y, z. When applying a macro it also helps to have the UCS set to the view you are working in. Check the handle positions in both the connecting part and the part you are fixing to, also beam position to middle top behind . Importing an odd ball section Draw out section in auto-cad, make sure it's a continuous polyline in model space with nothing else on drawing. Save it say in model folder. open Tekla go to modeling, profiles, define cross section using .DWG file, Parameters, add section name, click browse icon next to input .dwg click on dwg file, input into model with start and finish point, Ensure you give the profile a name or "invalid profile" error appears, click on part just inputted, property box will appear, change (features) properties as required. Open model folder, copy prof.db file, go to C, Tekla structures, company settings, firm folder and paste prof.db file into this folder. do not over write re-name the one in folder save say as prof.db2 Make sure the section has gone into the profile catalogue before you copy the prof.bd file. Sometimes this can be a bit tricky, use a unique profile name, all capitals with no spaces. The important thing here is to re-name the existing profdb.bin file in the firm folder and then insert the new file as the basic profdb.bin file. Weird isn't it?

http://www.mconnect-systems.de/downloads/components-for-tekla-structures.html

http://www.dowcotech.com/download-registration-form

TO ASSOCIATE TABLES WITH BARS ADD: CU_rebar_bending_schedule

Russian profiles: http://amsections.arcelormittal.com//index.php?id=17

Folder of the templates, which create reports:

Rebar schedule:

Type

Image

2_1

Requires standard bending radius.

2_2

Non-standard bending radius.

Type

Image

3_1

3_2

4_2

4_3

4_4

5_1

Type

Image

5_2

5_3

6_1

6_2

Requires 180 degree hook.

Type

Image

10

11

D1 = Radius from center of circle to the center line of reinforcing bar.

12

13

Can also be modeled using hooks at both ends (i.e. model D1 and D5 using 90 degree hooks).

14

Requires 90 degree hooks at both ends.

14_2

Type

Image

14_3

14_4

Requires 90 degree hooks at both ends.

14_5

Recognized when the start point and end point are in the same location and no hooks are used. If XS_REBAR_RECOGNITION_HOOKS_CONSIDERATION is set toFALSE, reinforcing bars with hooks (types 14 and 48) are recognized as 14_5.

15

Requires hooks at both ends.

16_1

Type

Image

16_2

17

18

19

20_1

20_2

Type

Image

21

22

23

24

25

26

Requires 180 degree hooks at both ends.

27 Requires 90 degree hooks at both ends.

Type

Image

28

Requires 180 degree hooks at both ends.

29

Requires 90 degree hooks at both ends.

29_2

29_3

29_4

29_5

Type

Image

30

Requires 180 degree hooks at both ends.

31

Requires 90 degree hooks at both ends.

32

Requires 180 degree hooks at both ends.

32_2

33 Requires 90 degree hooks at both ends.

34

Type

Image

35

Requires 180 degree hook.

36

Requires 180 degree hook.

36_2

Can also be modeled using hooks at both ends.

36_3

Can also be modeled using hooks at both ends.

37

Requires 180 degree hook.

38

Requires 180 degree hook at one end and 90 degree hook at the other end.

Type

Image

38_2

39

40

Requires 180 degree hooks at both ends.

41

Requires 90 degree hooks at both ends.

42

Requires 180 degree hooks at both ends.

43

43_2

Type

Image

44

Requires hooks at both ends.

44_2

Requires 180 degree hooks at both ends.

45

Requires hooks at both ends.

45_2

Requires 180 hooks at both ends.

46

Requires hooks at both ends.

47

Requires 90 degree hooks at both ends.

Type

Image

48

Requires hooks at both ends.

48_2

Requires hooks at both ends.

48_3

49

D1 = Reinforcing bar center line diameter.

49_2

Type

Image

50

Requires hooks at both ends.

51

Requires 90 degree hooks at both ends.

52

Requires hooks at both ends.

53

Requires hooks at both ends.

54

Requires hooks at both ends.

55

Type

Image

56

57

58

59

60

61

Requires hooks at both ends.

61_2

Recognized if XS_REBAR_RECOGNITION_HOOKS_CONSIDERATIONis set to FALSE.

Type

Image

61_3

Requires hooks at both ends.

62

Requires hook.

63

Requires hook.

64

Requires hooks at both ends.

64_2

Recognized if XS_REBAR_RECOGNITION_HOOKS_CONSIDERATIONis set to FALSE.

Type

Image

65

Requires hooks at both ends.

65_2

Recognized if XS_REBAR_RECOGNITION_HOOKS_CONSIDERATIONis set to FALSE.

66

67

67_2

Type

Image

68

69_1

69_2

70_1

70_2

71

Type

Image

72

73_1

73_2

73_3

74

75_1

Type

Image

75_2

76

77

78

79_1

Type

Image

79_2

80

UNKNOWN

For example:

Reinforcement templates
You can show dimensions, bending angles, and bending types of reinforcing bars in drawings and reports by including reinforcement-specific attributes, such as DIM_A, ANG_S, SHAPE, and SHAPE_INTERNAL, in template fields. For more information on creating templates, see the Template Editor (TplEd) online help.

Mapping dimensions
Use the rebar_schedule_config.inp file in the ..\Tekla Structures\<version>\environments\<environment>\system folder to map: Tekla Structures internal reinforcing bar dimensions and angles with specific template attributes Tekla Structures internal reinforcing bar bending types with specific bending types These mappings are environment-specific by default. You can modify them to suit your company or project needs. You can use equations, functions, and if statements to calculate the dimensions and angles you need to show. Use any standard text editor (for example, Notepad) to edit the rebar_schedule_config.inp file.

EXEMPLE The following example of the rebar_schedule_config.inp file maps the internal bending type 5_1 to the bending type identifier E, and the leg dimensions and bending angles to specific template attributes:
rebar_schedule_config.inp (Example 1)

BEND_TYPE_5_1[1]="E"BEND_TYPE_5_1[2]="DIM_A=D1"BEND_TYPE_5_1[3]="DIM_B =D5"BEND_TYPE_5_1[4]="DIM_C=D2"BEND_TYPE_5_1[5]="DIM_TD=TD"BEND_TYPE_5 _1[6]="ANG_U=A1"BEND_TYPE_5_1[7]="ANG_V=A2"

With this mapping, the internal bending type 6_2 becomes XY, and the template attributes DIM_B and DIM_C will show the horizontal and vertical dimensions of the second leg D2, and DIM_E and DIM_F the horizontal and vertical dimensions of the fourth leg D4: rebar_schedule_config.inp (Example 2)

BEND_TYPE_6_2[1]="XY"BEND_TYPE_6_2[2]="DIM_A=D1"BEND_TYPE_6_2[3]="DIM_ B=D2*COS(A2*PI/180)"BEND_TYPE_6_2[4]="DIM_C=D2*SIN(A2*PI/180)"BEND_TYP E_6_2[5]="DIM_D=D3"BEND_TYPE_6_2[6]="DIM_E=D4*COS(A1*PI/180)"BEND_TYPE _6_2[7]="DIM_F=D4*SIN(A1*PI/180)"BEND_TYPE_6_2[8]="DIM_G=D5"BEND_TYPE_ 6_2[9]="DIM_TD=TD"

The following example maps the internal bending type 4 to the bending type identifier A if the dimensions D1 and D3 are the same. Otherwise it maps 4 to B:
rebar_schedule_config.inp (Example 3) BEND_TYPE_4[1]=if (D1==D3) then ("A") else ("B") endifBEND_TYPE_4[2]="DIM_A=D1"BEND_TYPE_4[3]="DIM_B=D2"BEND_TYPE_4[4]="DIM_C=D3"BEND_TYPE_4[5]="D IM_TD=TD"

If Tekla Structures does not recognize a reinforcing bar bending shape, it uses the internal bending type UNKNOWN for it. In the rebar_schedule_config.inp file you can also define how unknown bending types appear in drawings and reports. For example, you may just want to use the bending type identifier ???, and list all leg dimensions and bending angles: rebar_schedule_config.inp (Example 4)

BEND_TYPE_UNKNOWN[1]="???"BEND_TYPE_UNKNOWN[2]="DIM_A=D1"BEND_TYPE_UNKNOWN[3]="DIM_B=D2"BEND_TYPE _UNKNOWN[4]="DIM_C=D3"BEND_TYPE_UNKNOWN[5]="DIM_D=D4"BEND_TYPE_UNKNOWN[6]="DIM_E=D5"BEND_TYPE_UNK NOWN[7]="DIM_F=D6"BEND_TYPE_UNKNOWN[8]="ANG_S=A1"BEND_TYPE_UNKNOWN[9]="ANG_T=A2"BEND_TYPE_UNKNOWN [10]="ANG_U=A3"BEND_TYPE_UNKNOWN[11]="ANG_V=A4"BEND_TYPE_UNKNOWN[12]="DIM_TD=TD"

TABELUL DE ARMATURI DE LA DEFAULT

URL: www.Tekla.com

Installation folder: C:\Program Files\Tekla Structures\ Uninstaller: MsiExec.exe /X{575339EB-99DC-4BD0-B65F-CF76AE1B0071}


(The Windows Installer is used for the installation, maintenance, and removal.)

Estimated size: 612.75 KB

DIM_A ... DIM_G, DIM_H1, DIM_H2, DIM_I, DIM_J, DIM_K1, DIM_K2, DIM_L, DIM_O, DIM_R, DIM_R_ALL, DIM_TD, DIM_WEIGHT, DIM_X, DIM_Y

Show dimensions of bent reinforcing bars based on the mappings in the rebar_schedule_config.inp file, located in the ..\Tekla Structures\<version>\environments\<environment>\system folder. These mappings are environment-specific by default. You can modify them to suit your company or project needs. DIM_TD shows the diameter of the bending cylinder, DIM_R shows the radius. DIM_R_ALL shows multiple radiuses. When you use DIM_R_ALL in a value field, use Text as Datatype andDistanceList as Meaning.

http://tekla-structures-forum-building-information-modeling.2295365.n4.nabble.com/Tekla-Structurestd3683410.html http://tekla-structures-forum-building-information-modeling.2295365.n4.nabble.com/ http://www.scribd.com/doc/29257146/Tekla-Advanced-Functions http://www.scribd.com/doc/97641449/55634251-Tekla-Structure-System-Tutorial http://www.scribd.com/doc/15651121/TEKLA-FULL-DETAILING-97 http://www.scribd.com/doc/117032230/Manual-Tekla-18

http://www.scribd.com/doc/47522749/GPE-102-o4-structuri-zidarie-confinata http://www.scribd.com/doc/31304773/Calcul-zidarie

También podría gustarte