Está en la página 1de 32

STANDARD

SERIES

STANDARD SERIES
INTRODUCTION
The Standard Series is our broadest and most comprehensive line of radial-leaded varistors. These components
consist of wire leads and have nominal disk diameters
from 3mm to 25mm. They are available with maximum
continuous operating voltages (MCOV) ranging from
11VAC to 1000VAC.
The Standard Series is designed to handle most low
and medium power applications requiring through-hole
components. Most sizes are available in Tape and Reel
and ammo pack.
Style Designation
The Maida style number is the primary means to identify
our components when ordered. The style number identifies
several parameters that are important for the characteristics
of the device. Observe the following part numbering system
when ordering our components:
D _ _ _ _ ZOV_ _ _ RA _ _ _
1. Coating Designation
D Standard Epoxy Coating
No code with 31 lead code
denotes no coating.
2. Nominal Disk Diameter
56 3mm
79 15mm
58 5mm
64 16mm
73 7mm
63 18mm
61 10mm
65 20mm
71 11mm
66 25mm
62 12mm
69 14mm
3. Lead Configuration code
(refer to lead codes)
4. Material Identifier, zinc-oxide varistor
5. AC Voltage Rating code, two
significant figures plus number of zeroes
that follow, e.g. 511 is 510 VAC
6. Special Instructions code, RA is standard
7. Energy Rating code, up to three numbers
(refer to ratings tables)

Standard Marking
Minimum marking information shall consist of an abbreviated
style designation and, when space is available, the manufacturers initials "MDC" or the company logo.
For example:
MDC
Z511
110UL
Where:
Z Represents "ZOV"
511 AC voltage rating code
110 Energy rating code
UL UL recognition if applicable
A manufacturing date code is available upon request.
Other safety agency designations are included if applicable.
How to Order the Standard Series
The following specifications tables provide a way to match
the Maida style number to a varistor that provides the
necessary specifications for a specific application. Once
the general style number is obtained, it will be necessary to
determine the required lead configuration. Refer to the lead
codes section and add the required code to the Maida style
number when ordering. Custom lead configurations are
available. Contact our engineering department for additional
information.
Dimensions such as mounting height above the seating
plane, lead spacing, and maximum thickness with regards
to each lead code is available in the mechanical dimensions
tables.

An example of a typical Maida style number is


D6521ZOV151RA20. This style number displays a nominal
disk size of 20mm, a standard lead code showing straight
wire leads, a maximum AC continuous operating voltage
of 150 VAC.

For more information call us at (757) 723-0785 or e-mail us at: maidadev@maida.com

STANDARD SERIES
SPECIFICATIONS

11, 14, and 17 VAC Varistors


Continuous

D58ZOV110RA00
D73ZOV110RA01
D6121ZOV110RA02
D6921ZOV110RA04
D6521ZOV110RA10

Recognitions
To
Nominal
Safety
Size
Agency
Standards
A B C D E F (mm)
X
X
5
X
X
7
X
X
10
X
X
14
X
X
20

D56ZOV140RA0R1
D58ZOV140RA00
D73ZOV140RA01
D6121ZOV140RA02
D6921ZOV140RA04
D6521ZOV140RA13

X
X
X
X
X

X
X
X
X
X

3
5
7
10
14
20

D56ZOV170RAR12
D58ZOV170RA00
D73ZOV170RA01
D6121ZOV170RA03
D6921ZOV170RA05
D6521ZOV170RA15

X
X
X
X
X

X
X
X
X
X

3
5
7
10
14
20

Maida
Style
Number

Minimum
Marking

Maximum Ratings
Transient

Applied
Voltage

Energy

(AC)
11
11
11
11
11

(DC)
14
14
14
14
14

10 x 1000
sec
(J)
0.6
1.1
2.6
5.2
13

Z14
Z140 - 00UL
Z140 - 01UL
Z140 - 02UL
Z140 - 04UL
Z140 - 13UL

14
14
14
14
14
14

18
18
18
18
18
18

0.1
0.7
1.3
3.2
6.3
16

N/A
N/A
N/A
N/A
N/A
N/A

50
250
500
1000
2000
3000

25
125
250
500
1000
2000

20
20
20
20
20
20

24
24
24
24
24
24

55
48
43
43
43
43

1
1
2.5
5
10
20

500
2000
2800
6000
15000
30000

Z17
Z170 - 00UL
Z170 - 01UL
Z170 - 03UL
Z170 - 05UL
Z170 - 15UL

17
17
17
17
17
17

22
22
22
22
22
22

0.12
0.9
1.6
3.9
7.8
19

N/A
N/A
N/A
N/A
N/A
N/A

50
250
500
1000
2000
3000

25
125
250
500
1000
2000

24
24
24
24
24
24

30
30
30
30
30
30

67
60
53
53
53
53

1
1
2.5
5
10
20

400
1600
2000
4000
10000
22000

Z110
Z110
Z110
Z110
Z110

00UL
01UL
02UL
04UL
10UL

8 x 20
sec
(J)
N/A
N/A
N/A
N/A
N/A

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
250
125
500
250
1000 500
2000 1000
3000 2000

Electrical Characteristics
Max
Varistor
Clamping
Typical
Voltage
Voltage
Cap.
@1 mA DC
(@Test Current)
1 V rms
Vmin
Vmax
@1kHz
(8 x 20 sec)
(V)
(V)
(V)
(A)
(pF)
16
20
40
1
2200
16
20
36
2.5
3500
16
20
36
5
7500
16
20
36
10
18000
16
20
36
20
37000

NOTES:
NOTES:
A = UL1449
File
E86730
- Transient Voltage
Surgeand
Suppression
D = Agencies.
VDE/CECC 42000/42201 & IEC 1051
Appendix
A lists
the single-pulse
peak current
energy ratings on file with the Safety
B = UL1414
Filetransient
E38785rating
- Across
- The in
Line
= UL497B
- File E180012
Maximum
specified
thisApplications
table are valid. They may differ from thoseEshown
in Appendix
A.
A = UL1449
FileLR33458
E86730 - Transient Voltage Surge Suppression
D = VDE/CECC
& IEC 1051
C = CSA
C22.2 File
F = SEV 42000/42201
- 96.7 70250.01
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


[
Size
code

0.160
[4.06]
0.200
[5.08]
0.200
[5.08]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]

0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]

Y
D56
D58
D73
D61
D69
D65

0.322 0.197
[8.18] [5.00]
0.423 0.298
[10.74] [7.57]
0.472 0.354
[11.99] [8.99]
0.597 0.472
[15.16] [11.99]
0.770 0.650
[19.56] [16.51]
1.020 0.905
[25.91] [22.99]

OFFSET AND THICKNESS


14
17
VAC
VAC
T
Y
T
Y
T
0.069 0.165 0.080 0.170
N/A
[1.75] [4.19] [2.03] [4.32]
0.161 0.074 0.165 0.085 0.170
[4.09] [1.88] [4.19] [2.16] [4.32]
0.161 0.074 0.165 0.085 0.170
[4.09] [1.88] [4.19] [2.16] [4.32]
0.161 0.081 0.165 0.092 0.170
[4.09] [2.06] [4.19] [2.34] [4.32]
0.161 0.081 0.165 0.092 0.170
[4.09] [2.06] [4.19] [2.34] [4.32]
0.161 0.081 0.165 0.092 0.170
[4.09] [2.06] [4.19] [2.34] [4.32]

11
VAC
N/A
0.065
[1.65]
0.065
[1.65]
0.072
[1.83]
0.072
[1.83]
0.072
[1.83]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

STANDARD SERIES
SPECIFICATIONS

20, 25, and 30 VAC Varistors


Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

Continuous
Nominal
Size

A B C D E F

Minimum
Marking

Maximum Ratings
Transient

Applied
Voltage

Energy

Z20
Z200 - 00UL
Z200 - 01UL
Z200 - 03UL
Z200 - 06UL
Z200 - 20UL

(AC)
20
20
20
20
20
20

(DC)
26
26
26
26
26
26

10 x 1000
sec
(J)
0.15
1.1
2
4.8
9.5
24

8 x 20
sec
(J)
N/A
N/A
N/A
N/A
N/A
N/A

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
50
25
250
125
500
250
1000
500
2000
1000
3000
2000

Electrical Characteristics
Max
Varistor
Clamping
Typical
Voltage
Voltage
Cap.
@1 mA DC
(@Test Current)
1 V rms
Vmin
Vmax
@1kHz
(8 x 20 sec)
(V)
(V)
(V)
(A)
(pF)
30
36
73
1
487
30
36
73
1
1675
30
36
65
2.5
3614
30
36
65
5
6655
30
36
65
10
14447
30
36
65
20
33064

D56ZOV200RA0R15
D58ZOV200RA00
D73ZOV200RA01
D6121ZOV200RA03
D6921ZOV200RA06
D6521ZOV200RA20

X
X
X
X
X

X
X
X
X
X

(mm)
3
5
7
10
14
20

D56ZOV250RA0R18
D58ZOV250RA01
D73ZOV250RA02
D6121ZOV250RA04
D6921ZOV250RA07
D6521ZOV250RA24

X
X
X
X
X

X
X
X
X
X

3
5
7
10
14
20

Z25
Z250 - 01UL
Z250 - 02UL
Z250 - 04UL
Z250 - 07UL
Z250 - 24UL

25
25
25
25
25
25

31
31
31
31
31
31

0.18
1.2
2.4
5.6
11
28

N/A
N/A
N/A
N/A
N/A
N/A

50
250
500
1000
2000
3000

25
125
250
500
1000
2000

35
35
35
35
35
35

43
43
43
43
43
43

86
86
77
77
77
77

1
1
2.5
5
10
20

412
1417
3058
5632
12225
27977

D56ZOV300RA0R2
D58ZOV300RA01
D73ZOV300RA02
D6121ZOV300RA05
D6921ZOV300RA09
D6321ZOV300RA26
D6521ZOV300RA30

X
X
X
X
X
X

X
X
X
X
X
X

3
5
7
10
14
18
20

Z30
Z300 - 01UL
Z300 - 02UL
Z300 - 05UL
Z300 - 09UL
Z300 - 26UL
Z300 - 30UL

30
30
30
30
30
30
30

38
38
38
38
38
38
38

0.2
1.5
2.8
6.8
14
26
34

N/A
N/A
N/A
N/A
N/A
N/A
N/A

50
250
500
1000
2000
2500
3000

25
125
250
500
1000
1500
2000

42
42
42
42
42
42
42

52
52
52
52
52
52
52

99
99
93
93
93
93
93

1
1
2.5
5
10
20
20

342
1176
2537
4673
10144
18230
23215

NOTES:
Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies.
Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A.
A = UL1449 File E86730 - Transient Voltage Surge Suppression
D = VDE/CECC 42000/42201 & IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D56
D58
D73
D61
D69
D63
D65

0.322
[8.18]
0.423
[10.74]
0.479
[12.17]
0.597
[15.16]
0.775
[19.69]
0.937
[23.80]
1.030
[26.16]

0.197
[5.00]
0.298
[7.57]
0.354
[8.99]
0.472
[11.99]
0.650
[16.51]
0.812
[20.62]
0.905
[22.99]

0.160
[4.06]
0.200
[5.08]
0.200
[5.08]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]

0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]

OFFSET AND THICKNESS


25
30
VAC
VAC
T
Y
T
Y
T
0.176 0.059 0.182 0.067 0.190
[4.47] [1.50] [4.62] [1.70] [4.83]
0.176 0.064 0.182 0.072 0.190
[4.47] [1.63] [4.62] [1.83] [4.83]
0.176 0.064 0.182 0.072 0.190
[4.47] [1.63] [4.62] [1.83] [4.83]
0.176 0.071 0.182 0.079 0.190
[4.47] [1.80] [4.62] [2.00] [4.83]
0.176 0.071 0.182 0.079 0.190
[4.47] [1.80] [4.62] [2.00] [4.83]
0.079 0.190
N/A
N/A
N/A
[2.00] [4.83]
0.176 0.071 0.182 0.079 0.190
[4.47] [1.80] [4.62] [2.00] [4.83]

20
VAC
Y
0.053
[1.35]
0.058
[1.47]
0.058
[1.47]
0.065
[1.65]
0.065
[1.65]
N/A
0.065
[1.65]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

STANDARD SERIES
SPECIFICATIONS

35, 40, and 50 VAC Varistors


Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

Continuous
Nominal
Size

Minimum
Marking

Maximum Ratings
Transient

Applied
Voltage

Energy

D56ZOV350RA0R25
D58ZOV350RA01
D73ZOV350RA02
D6121ZOV350RA06
D6921ZOV350RA10
D6521ZOV350RA35

X
X
X
X
X

X
X
X
X
X

(mm)
3
5
7
10
14
20

Z35
Z350 - 01UL
Z350 - 02UL
Z350 - 06UL
Z350 - 10UL
Z350 - 35UL

(AC)
35
35
35
35
35
35

(DC)
45
45
45
45
45
45

10 x 1000
sec
(J)
0.25
1.8
3.4
8.1
16
41

D56ZOV400RA0R3
D58ZOV400RA01
D73ZOV400RA03
D6121ZOV400RA07
D6921ZOV400RA12
D6521ZOV400RA40

X
X
X
X
X

X
X
X
X
X

3
5
7
10
14
20

Z40
Z400 - 01UL
Z400 - 03UL
Z400 - 07UL
Z400 - 12UL
Z400 - 40UL

40
40
40
40
40
40

56
56
56
56
56
56

0.3
2.2
5.2
13
20
49

N/A
N/A
N/A
N/A
N/A
N/A

50
250
500
1000
2000
3000

25
125
250
500
1000
2000

61
61
61
61
61
61

75
75
75
75
75
75

138
138
135
135
135
135

1
1
2.5
5
10
20

133
438
945
1627
3285
7517

D56ZOV500RA0R4
D58ZOV500RA01
D73ZOV500RA02
D6121ZOV500RA03
D7121ZOV500RA04
D6221ZOV500RA05
D6921ZOV500RA06
D6521ZOV500RA42

X
X
X
X
X
X
X

X
X
X

3
5
7
10
11
12
14
20

Z50
Z500 - 01UL
Z500 - 02UL
Z500 - 03UL
Z500 - 04UL
Z500 - 05UL
Z500 - 06UL
Z500 - 42UL

50
50
50
50
50
50
50
50

66
66
66
66
66
66
66
66

0.4
3.5
7
14
19
22
28
56

N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A

50
800
1750
3500
4000
4500
6000
10000

25
600
1250
2500
2800
3200
5000
7000

74
74
74
74
74
74
74
74

90
90
90
90
90
90
90
90

163
163
157
147
147
147
147
147

2
5
10
25
30
40
50
100

109
364
767
1375
1533
2602
2829
5041

A B C D E F

X
X
X

8 x 20
sec
(J)
N/A
N/A
N/A
N/A
N/A
N/A

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
50
25
250
125
500
250
1000
500
2000
1000
3000
2000

Electrical Characteristics
Max
Varistor
Clamping
Typical
Cap.
Voltage
Voltage
@1 mA DC
(@Test Current)
1 V rms
Vmin
Vmax
@1kHz
(8 x 20 sec)
(V)
(V)
(V)
(A)
(pF)
50
62
117
1
287
50
62
117
1
987
50
62
110
2.5
2130
50
62
110
5
3922
50
62
110
10
8514
50
62
110
20
19484

NOTES:
NOTES:
A = UL1449
FileA E86730
Transient Voltage
Surge and
Suppression
= file
VDE/CECC
42000/42201
& IEC 1051
Appendix
lists the -single-pulse
peak current
energy ratingsDon
with the Safety
Agencies.
B = UL1414
Filetransient
E38785 rating
- Across
- The Line
Applications
E =differ
UL497B
File E180012
Maximum
specified
in this
table are valid. They may
from -those
shown in Appendix A.
C = CSA
File
LR33458
A = C22.2
UL1449
File
E86730 - Transient Voltage Surge Suppression F = SEV - 96.7
D = 70250.01
VDE/CECC 42000/42201 & IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D56
D58
D73
D61
D71
D62
D69
D65

0.322
[8.18]
0.423
[10.74]
0.479
[12.17]
0.597
[15.16]
0.656
[16.66]
0.715
[18.16]
0.775
[19.69]
1.030
[26.16]

0.197
[5.07]
0.298
[7.57]
0.354
[8.99]
0.472
[11.99]
0.531
[13.49]
0.590
[14.99]
0.650
[16.51]
0.905
[22.99]

0.160
[4.06]
0.200
[5.08]
0.200
[5.08]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]

0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]

OFFSET AND THICKNESS


40
50
VAC
VAC
T
Y
T
Y
T
0.199 0.054 0.211 0.039 0.174
[5.05] [1.37] [5.36] [0.99] [4.42]
0.199 0.059 0.211 0.046 0.174
[5.05] [1.50] [5.36] [1.17] [4.42]
0.199 0.059 0.211 0.046 0.174
[5.05] [1.50] [5.36] [1.17] [4.42]
0.199 0.066 0.211 0.054 0.174
[5.05] [1.68] [5.36] [1.37] [4.42]
0.054 0.174
N/A
N/A
N/A
[1.37] [4.42]
0.054 0.174
N/A
N/A
N/A
[1.37] [4.42]
0.199 0.066 0.211 0.055 0.174
[5.05] [1.68] [5.36] [1.40] [4.42]
0.199 0.066 0.211 0.055 0.225
[5.05] [1.68] [5.36] [1.40] [5.72]

35
VAC
Y
0.076
[1.93]
0.081
[2.06]
0.081
[2.06]
0.088
[2.24]
N/A
N/A
0.088
[2.24]
0.088
[2.24]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

STANDARD SERIES
SPECIFICATIONS

60, 75, and 95 VAC Varistors


Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

A B C D E F
D56ZOV600RA0R5
D58ZOV600RA01
D73ZOV600RA02
D6121ZOV600RA03
D7121ZOV600RA04
D6221ZOV600RA05
D6921ZOV600RA06
D6521ZOV600RA45

X
X
X
X
X
X
X

X
X
X

D56ZOV750RA0R6
D58ZOV750RA01
D73ZOV750RA02
D6121ZOV750RA03
D7121ZOV750RA04
D6221ZOV750RA05
D6921ZOV750RA06
D6521ZOV750RA55

X
X
X
X
X
X
X

X
X
X

D56ZOV950RA0R7
D58ZOV950RA01
D73ZOV950RA02
D6121ZOV950RA03
D7121ZOV950RA04
D6221ZOV950RA05
D6921ZOV950RA06
D6521ZOV950RA65

X
X
X
X
X
X
X

X
X
X

X
X
X

X
X
X

X
X
X

Continuous
Nominal
Size

Minimum
Marking

Maximum Ratings
Transient

Applied
Voltage

Energy
8 x 20
sec
(J)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N./A

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
50
25
800
600
1750 1250
3500 2500
4000 2800
4500 3200
6000 5000
10000 7000

Electrical Characteristics
Max
Varistor
Clamping
Typical
Voltage
Voltage
Cap.
@1 mA DC
(@Test Current)
1 V rms
Vmin
Vmax
@1kHz
(8 x 20 sec)
(V)
(V)
(V)
(A)
(pF)
90
110
200
2
92
90
110
190
5
299
90
110
180
10
629
90
110
175
25
1128
90
110
175
30
1257
90
110
175
40
2133
90
110
175
50
2319
90
110
175
100
5264

(mm)
3
5
7
10
11
12
14
20

Z60
Z600 - 01UL
Z600 - 02UL
Z600 - 03UL
Z600 - 04UL
Z600 - 05UL
Z600 - 06UL
Z600 - 45UL

(AC)
60
60
60
60
60
60
60
60

(DC)
81
81
81
81
81
81
81
81

10 x 1000
sec
(J)
0.5
4.5
9
18
20
22
36
72

3
5
7
10
11
12
14
20

Z75
Z750 - 01UL
Z750 - 02UL
Z750 - 03UL
Z750 - 04UL
Z750 - 05UL
Z750 - 06UL
Z750 - 55UL

75
75
75
75
75
75
75
75

102
102
102
102
102
102
102
102

0.6
5.5
11
22
22
27
44
88

N/A
N/A
N/A
N/A
N/A
N/A
N/A
N./A

100
800
1750
3500
4000
4500
6000
10000

50
600
1250
2500
2800
3200
5000
7000

108
108
108
108
108
108
108
108

132
132
132
132
132
132
132
132

220
220
220
210
210
210
210
210

2
5
10
25
30
40
50
100

77
249
524
940
1048
1778
1933
4387

3
5
7
10
11
12
14
20

Z95
Z950 - 01UL
Z950 - 02UL
Z950 - 03UL
Z950 - 04UL
Z950 - 05UL
Z950 - 06UL
Z950 - 65UL

95
95
95
95
95
95
95
95

127
127
127
127
127
127
127
127

0.7
6.6
13
25
28
33
53
106

N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A

100
800
1750
3500
4000
4500
6000
10000

50
600
1250
2500
2800
3200
5000
7000

135
135
135
135
135
135
135
135

165
165
165
165
165
165
165
165

240
240
255
255
255
255
255
255

2
5
10
25
30
40
50
100

34
118
255
469
537
924
1019
2331

NOTES:
Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies.
Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A.
A = UL1449 File E86730 - Transient Voltage Surge Suppression
D = VDE/CECC 42000/42201 & IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D56
D58
D73
D61
D71
D62
D69
D65

0.322 0.197
[8.18]
[5.0]
0.423 0.298
[10.74] [7.57]
0.479 0.354
[12.17] [8.99]
0.597 0.472
[15.16] [12.0]
0.656 0.531
[16.66] [13.49]
0.715 0.590
[18.16] [15.0]
0.775 0.650
[19.69] [16.51]
1.030 0.905
[26.16] [22.99]

0.160
[4.06]
0.200
[5.08]
0.200
[5.08]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]

0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]

OFFSET AND THICKNESS


75
95
VAC
VAC
T
Y
T
Y
T
0.243
0.48
0.184 0.047 0.191
[6.17] [1.22] [4.67] [1.19] [4.85]
0.243 0.055 0.184 0.052 0.191
[6.17] [1.40] [4.67] [1.32] [4.85]
0.178 0.056 0.184 0.052 0.191
[4.52] [1.42] [4.67] [1.32] [4.85]
0.178 0.064 0.184 0.059 0.191
[4.52] [1.63] [4.67] [1.50] [4.85]
0.178 0.064 0.184 0.059 0.191
[4.52] [1.63] [4.67] [1.50] [4.85]
0.178 0.065 0.184 0.059 0.191
[4.52] [1.65] [4.67] [1.50] [4.85]
0.178 0.065 0.184 0.059 0.191
[4.52] [1.65] [4.67] [1.50] [4.85]
0.243 0.066 0.172 0.059 0.179
[6.17] [1.68] [4.37] [1.50] [4.55]

60
VAC
Y
0.044
[1.12]
0.050
[1.27]
0.051
[1.30]
0.058
[1.47]
0.059
[1.15]
0.059
[1.15]
0.060
[1.52]
0.060
[1.52]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

STANDARD SERIES
SPECIFICATIONS
120 and 130 VAC Varistors
Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

Continuous
Nominal
Size

A B C D E F
D56ZOV121RA0R9
D58ZOV121RA02
D73ZOV121RA03
D68ZOV121RA03
D6121ZOV121RA04
D7121ZOV121RA05
D6221ZOV121RA07
D6921ZOV121RA09
D6421ZOV121RA10
D6321ZOV121RA65
D6521ZOV121RA20

X
X X
X
X X
X X
X X
X X
X
X
X X

X
X
X
X
X
X
X
X
X

D56ZOV131RA1R0
D58ZOV131RA02
D73ZOV131RA03
D68ZOV131RA03
D6121ZOV131RA04
D7121ZOV131RA05
D6221ZOV131RA07
D6921ZOV131RA09
D6421ZOV131RA10
D6321ZOV131RA70
D6521ZOV131RA20
D6694ZOV131RA140

X
X X
X
X X
X X
X X
X X
X
X X
X X
X X

X
X
X
X
X
X
X
X
X
X

X
X
X
X
X

X X X
X X X
X X X
X
X
X X X
X X X
X
X
X X X
X

Minimum
Marking

Maximum Ratings
Transient
Energy

Applied
Voltage

(mm)
3
5
7
8
10
11
12
14
16
18
20

Z121
Z121 - 02UL
Z121 - 03UL
Z121 - 03UL
Z121 - 04UL
Z121 - 05UL
Z121 - 07UL
Z121 - 09UL
Z121 - 10UL
Z121 - 65UL
Z121 - 20UL

(AC)
120
120
120
120
120
120
120
120
120
120
120

(DC)
160
160
160
160
160
160
160
160
160
160
160

10 x 1000
sec
(J)
0.9
8
16
19
33
36
41
52
58
65
130

3
5
7
8
10
11
12
14
16
18
20
25

Z131
Z131 - 02UL
Z131 - 03UL
Z131 - 03UL
Z131 - 04UL
Z131 - 05UL
Z131 - 07UL
Z131 - 09UL
Z131 - 10UL
Z131 - 70UL
Z131 - 20UL
Z131 - 140UL

130
130
130
130
130
130
130
130
130
130
130
130

175
175
175
175
175
175
175
175
175
175
175
175

1
8.5
17.5
27
45
48
53
70
100
130
150
170

8 x 20
sec
(J)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1
8.5
17.5
27
45
48
53
70
100
130
150
170

Electrical Characteristics

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
100
50
800
600
1750
1250
2500
1700
3500
2500
4000
2800
4500
3200
6000
5000
6300
5300
7500
6500
10000 7000

Vmin
(V)
170
170
170
170
170
170
170
170
170
170
170

Vmax
(V)
207
207
207
207
207
207
207
207
207
207
207

100
800
1750
2300
3500
4000
4500
6500
7700
9000
12000
18000

184
184
184
184
184
184
184
184
184
184
184
184

224
224
224
224
224
224
224
224
224
224
224
224

50
600
1250
1500
2500
2800
3200
5000
6000
7000
9000
13000

Varistor
Voltage
@1 mA DC

Max Clamping
Voltage
(@Test Current)
(8 x 20 sec)
(V)
(A)
310
2
310
5
320
10
320
15
320
25
320
30
320
40
320
50
320
70
320
100
320
100
350
350
340
340
340
340
340
340
340
340
340
340

2
5
10
15
25
30
40
50
70
100
100
100

Typical
Cap.
1 V rms
@1kHz
(pF)
34
118
255
327
469
537
924
1019
1506
1830
2331
34
116
250
316
438
494
835
890
1304
1571
2001
3634

NOTES:
Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies.
Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A.
A = UL1449 File E86730 - Transient Voltage Surge Suppression
D = VDE/CECC 42000/42201 & IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D56
D58
D73
D68
D61
D71
D62
D69
D64
D63
D65
D66

0.322
[8.18]
0.423
[10.74]
0.479
[12.17]
0.519
[13.18]
0.597
[15.16]
0.656
[16.66]
0.715
[18.16]
0.775
[19.69]
0.835
[21.21]
0.912
[23.16]
1.030
[26.16]
1.250
[31.75]

0.197
[5.0]
0.298
[7.57]
0.354
[4.31]
0.394
[10.0]
0.472
[12.0]
0.531
[13.49]
0.590
[14.99]
0.650
[16.51]
0.710
[18.03]
0.787
[19.99]
0.905
[22.99]
1.100
[27.94]

0.160
[4.06]
0.200
[5.08]
0.200
[5.08]
0.200
[5.08]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.500
[12.7]

0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.040
[10.2]

OFFSET AND
120
VAC
Y
T
0.054 0.201
[1.37] [5.11]
0.061 0.204
[1.55] [5.18]
0.059 0.201
[1.50] [5.11]
0.059 0.201
[1.50] [5.11]
0.066 0.201
[1.68] [5.11]
0.066 0.201
[1.68] [5.11]
0.066 0.201
[1.68] [5.11]
0.066 0.201
[1.68] [5.11]
0.066 0.201
[1.68] [5.11]
0.066 0.201
[1.68] [5.11]
0.066 0.201
[1.68] [5.11]
N/A

N/A

THICKNESS
130
VAC
Y
T
0.056 0.204
[1.42] [5.18]
0.065 0.208
[1.65] [5.28]
0.061 0.204
[1.55] [5.18]
0.061 0.204
[1.55] [5.18]
0.068 0.204
[1.73] [5.18]
0.068 0.204
[1.73] [5.18]
0.068 0.204
[1.73] [5.18]
0.068 0.204
[1.73] [5.18]
0.068 0.204
[1.73] [5.18]
0.068 0.204
[1.73] [5.18]
0.068 0.204
[1.73] [5.18]
0.076 0.198
[1.93] [5.03]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

STANDARD SERIES
SPECIFICATIONS
140 and 150 VAC Varistors
Recognitions
Maida
Style
Number

D56ZOV141RA1R1
D58ZOV141RA02
D73ZOV141RA03
D68ZOV141RA03
D6121ZOV141RA04
D7121ZOV141RA05
D6221ZOV141RA07
D6921ZOV141RA09
D6421ZOV141RA10
D6321ZOV141RA75
D6521ZOV141RA20
D6694ZOV141RA150

To
Nominal
Safety
Size
Agency
Standards
A B C D E F (mm)
3
X
X X X
5
X X X X X X
7
X X
8
X X X X X X
10
X X X X
X
11
X X X X X X
12
X X X X X X
14
X X
16
X X X
X
18
X X X X X X
20
X X X
X
25

D56ZOV151RA1R2
D58ZOV151RA02
D73ZOV151RA03
D68ZOV151RA03
D6121ZOV151RA04
D7121ZOV151RA05
D6221ZOV151RA07
D6921ZOV151RA09
D6421ZOV151RA10
D6321ZOV151RA80
D6521ZOV151RA20
D6694ZOV151RA160

X
X X
X
X X
X X
X X
X X
X
X X
X X
X X

X X X
X X X X
X
X X X X
X X
X
X X X X
X X X X
X
X
X
X X X X
X
X

Maximum Ratings
Transient

Continuous

3
5
7
8
10
11
12
14
16
18
20
25

Minimum
Marking

Energy
Applied
Voltage

Z141
Z141 - 02UL
Z141 - 03UL
Z141 - 03UL
Z141 - 04UL
Z141 - 05UL
Z141 - 07UL
Z141 - 09UL
Z141 - 10UL
Z141 - 75UL
Z141 - 20UL
Z141 - 150UL

(AC)
140
140
140
140
140
140
140
140
140
140
140
140

(DC)
180
180
180
180
180
180
180
180
180
180
180
180

10 x 1000
sec
(J)
1.1
9
20
30
50
54
59
78
106
135
160
180

Z151
Z151 - 02UL
Z151 - 03UL
Z151 - 03UL
Z151 - 04UL
Z151 - 05UL
Z151 - 07UL
Z151 - 09UL
Z151 - 10UL
Z151 - 80UL
Z151 - 20UL
Z151 - 160UL

150
150
150
150
150
150
150
150
150
150
150
150

200
200
200
200
200
200
200
200
200
200
200
200

1.2
10.5
21
30
55
58
64
84
112
140
170
190

8 x 20
sec
(J)
1.1
9
20
30
50
54
59
78
106
135
160
180
1.2
10.5
21
30
55
58
64
84
112
140
170
190

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
100
50
800
600
1750
1250
2400
1700
3500
2500
4000
2800
4500
3200
6500
5000
7700
6000
9000
7000
12000 9000
18000 13000
100
800
1750
2300
3500
4000
4500
6500
7700
9000
12000
18000

50
600
1250
1500
2500
2800
3200
5000
6000
7000
9000
13000

Electrical Characteristics
Max
Varistor
Clamping
Typical
Voltage
Voltage
Cap.
@1 mA DC
(@Test Current)
1 V rms
Vmin
Vmax
@1kHz
(8 x 20 sec)
(V)
(V)
(V)
(A)
(pF)
198
242
380
2
33
198
242
380
5
111
198
242
360
10
232
198
242
360
15
293
198
242
360
25
407
198
242
360
30
458
198
242
360
40
775
198
242
360
50
825
198
242
360
70
1209
198
242
360
100
1457
198
242
360
100
1855
198
242
360
100
3370
212
212
212
212
212
212
212
212
212
212
212
212

259
259
259
259
259
259
259
259
259
259
259
259

430
430
395
395
395
395
395
395
395
395
395
395

2
5
10
15
25
30
40
50
70
100
100
100

NOTES:
NOTES:
A = UL1449
FileAE86730
Transient Voltage
Surge and
Suppression
D =the
VDE/CECC
42000/42201 & IEC 1051
Appendix
lists the-single-pulse
peak current
energy ratings on file with
Safety Agencies.
B = UL1414
Filetransient
E38785 -rating
Across
- The Line
Applications
E = those
UL497B
- Filein E180012
Maximum
specified
in this
table are valid. They may differ from
shown
Appendix A.
C = CSA
File
LR33458
F =D SEV
- 96.7 70250.01
A = C22.2
UL1449
File
E86730 - Transient Voltage Surge Suppression
= VDE/CECC
42000/42201 & IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D56
D58
D73
D68
D61
D71
D62
D69
D64
D63
D65
D66

0.322
[8.18]
0.423
[10.74]
0.479
[12.17]
0.519
[13.18]
0.597
[15.16]
0.656
[16.66]
0.715
[18.16]
0.775
[19.69]
0.835
[21.21]
0.912
[23.16]
1.030
[26.16]
1.250
[31.75]

0.197
[5.00]
0.298
[7.57]
0.354
[8.99]
0.394
[10.00]
0.472
[11.99]
0.531
[13.49]
0.590
[14.99]
0.650
[16.51]
0.710
[18.03]
0.787
[19.99]
0.905
[22.99]
1.100
[27.94]

0.160
[4.06]
0.200
[5.08]
0.200
[5.08]
0.200
[5.08]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.500
[12.7]

0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.040
[10.2]

OFFSET AND
140
VAC
Y
T
0.060 0.208
[1.52] [5.28]
0.065 0.208
[1.65] [5.28]
0.065 0.208
[1.65] [5.28]
0.065 0.208
[1.65] [5.28]
0.072 0.208
[1.83] [5.28]
0.072 0.208
[1.83] [5.28]
0.072 0.208
[1.83] [5.28]
0.072 0.208
[1.83] [5.28]
0.072 0.208
[1.83] [5.28]
0.072 0.208
[1.83] [5.28]
0.072 0.208
[1.83] [5.28]
0.080 0.202
[2.03] [5.14]

THICKNESS
150
VAC
Y
T
0.064 0.212
[1.63] [5.38]
0.069 0.212
[1.75] [5.38]
0.069 0.212
[1.75] [5.38]
0.069 0.212
[1.75] [5.38]
0.076 0.212
[1.93] [5.38]
0.076 0.212
[1.93] [5.38]
0.076 0.212
[1.93] [5.38]
0.076 0.212
[1.93] [5.38]
0.076 0.212
[1.93] [5.38]
0.076 0.212
[1.93] [5.38]
0.076 0.212
[1.93] [5.38]
0.084 0.207
[2.13] [5.26]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

30
101
212
268
373
420
710
756
1108
1336
1701
3089

STANDARD SERIES
SPECIFICATIONS

180 and 210 VAC Varistors


Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

Nominal
Size

A B C D E F
D56ZOV181RA1R3
D58ZOV181RA02
D73ZOV181RA03
D68ZOV181RA03
D6121ZOV181RA04
D6221ZOV181RA07
D6921ZOV181RA09
D6321ZOV181RA100
D6521ZOV181RA20
D6694ZOV181RA200

X
X X
X
X X
X X
X X
X X
X X
X X

D56ZOV211RA1R5
D58ZOV211RA07
D73ZOV211RA18
D61ZOV211RA30
D62ZOV211RA45
D69ZOV211RA65
D63ZOV211RA100
D65ZOV211RA110
D6694ZOV211RA220

X
X
X
X
X
X
X
X

X
X
X
X
X
X
X

X
X
X
X
X

X X X
X X X
X X X
X X X
X X X

X X X X
X
X

X
X
X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X
X
X
X

Maximum Ratings
Transient

Continuous

X
X
X
X
X
X

Minimum
Marking

Applied
Voltage

Energy

(mm)
3
5
7
8
10
12
14
18
20
25

Z181
Z181 - 02UL
Z181 - 03UL
Z181 - 03UL
Z181 - 04UL
Z181 - 07UL
Z181 - 09UL
Z181 - 100UL
Z181 - 20UL
Z181 - 200UL

(AC)
180
180
180
180
180
180
180
180
180
180

(DC)
230
230
230
230
230
230
230
230
230
230

10 x 1000
sec
(J)
1.3
11
24
32
60
62
100
150
190
200

3
5
7
10
12
14
18
20
25

Z211
Z211 - 07UL
Z211 - 18UL
Z211 - 30UL
Z211 - 45UL
Z211 - 65UL
Z211 - 75UL
Z211 - 110UL
Z211 - 220UL

210
210
210
210
210
210
210
210
210

270
270
270
270
270
270
270
270
270

1.5
13
28
58
66
120
185
230
250

8 x 20
sec
(J)
1.3
11
24
32
60
62
100
150
190
200
1.5
13
28
58
66
120
185
230
250

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
100
50
800
600
1750
1250
2400
1700
3500
2500
4500
3200
6000
5000
7500
6000
10000 7000
13000 9000

Electrical Characteristics
Max
Varistor
Clamping
Typical
Voltage
Voltage
Cap.
@1 mA DC
(@Test Current)
1 V rms
Vmin
Vmax
@1kHz
(8 x 20 sec)
(V)
(V)
(V)
(A)
(pF)
255
311
510
2
26
255
311
510
5
87
255
311
445
10
182
255
311
445
15
230
255
311
465
25
319
255
311
465
40
609
255
311
465
50
648
255
311
465
100
1145
255
311
465
100
1458
255
311
465
100
2648

100
800
1750
3500
4500
6000
7500
10000
13000

297
297
297
297
297
297
297
297
297

50
600
1250
2500
3200
4500
6000
6500
9000

363
363
363
363
363
363
363
363
363

570
545
545
545
545
545
545
545
545

2
5
10
25
40
50
75
100
100

22
74
154
271
516
550
971
1237
2247

NOTES:
Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies.
Maximum transient ratings specified in this table are valid. They may differ from those shown in Appendix A.
A = UL1449 File E86730 - Transient Voltage Surge Suppression
D = VDE/CECC 42000/42201 & IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D56
D58
D73
D68
D61
D62
D69
D63
D65
D66

0.322
[8.18]
0.423
[10.74]
0.479
[12.17]
0.519
[13.18]
0.597
[15.16]
0.715
[18.16]
0.775
[19.69]
0.912
[23.16]
1.030
[26.16]
1.250
[31.75]

0.197
[5.00]
0.298
[7.57]
0.354
[8.99]
0.394
[10.00]
0.472
[11.99]
0.590
[14.99]
0.650
[16.51]
0.787
[19.99]
0.905
[22.99]
1.100
[27.94]

0.160
[4.06]
0.200
[5.08]
0.200
[5.08]
0.200
[5.08]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.500
[12.7]

0.020
0.51]
0.025
[0.64]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.040
[1.02]

OFFSET AND
180
VAC
Y
T
0.069 0.223
[1.75] [5.66]
0.074 0.223
[1.88] [5.66]
0.074 0.223
[1.88] [5.66]
0.074 0.223
[1.88] [5.66]
0.081 0.223
[2.06] [5.66]
0.081 0.223
[2.06] [5.66]
0.081 0.223
[2.06] [5.66]
0.081 0.223
[2.06] [5.66]
0.081 0.223
[2.06] [5.66]
0.089 0.217
[2.26] [5.51]

THICKNESS
210
VAC
Y
T
0.080 0.220
[2.03] [5.59]
0.085 0.220
[2.16] [5.59]
0.085 0.236
[2.16] [5.99]
N/A

N/A

0.092
[2.34]
0.092
[2.34]
0.091
[2.31]
0.091
[2.31]
0.091
[2.31]
0.099
[2.51]

0.237
[6.02]
0.234
[5.94]
0.239
[6.07]
0.234
[5.94]
0.234
[5.94]
0.234
[5.94]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

STANDARD SERIES
SPECIFICATIONS
230 and 250 VAC Varistors
Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

Continuous

A B C D E F
D56ZOV231RA1R7
D58ZOV231RA08
D73ZOV231RA20
D68ZOV231RA20
D61ZOV231RA35
D62ZOV231RA50
D69ZOV231RA70
D63ZOV231RA80
D65ZOV231RA115
D6694ZOV231RA230

X
X X
X
X X
X X
X X
X X
X X
X X

X
X
X
X
X
X
X
X

D56ZOV251RA1R9
D58ZOV251RA08
D73ZOV251RA21
D68ZOV251RA21
D61ZOV251RA40
D62ZOV251RA55
D69ZOV251RA72
D63ZOV251RA90
D65ZOV251RA130
D6694ZOV251RA260

X
X X
X
X X
X X
X X
X X
X X
X X

X
X X X X
X
X X X X
X X X X
X X X X
X X X X
X X X X
X
X

X
X X X
X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X

Nominal
Size

Minimum
Marking

(mm)
3
5
7
8
10
12
14
18
20
25

Z231
Z231-08UL
Z231-20UL
Z231 - 20UL
Z231-35UL
Z231-50UL
Z231-70UL
Z231-80UL
Z231-115UL
Z231-230UL

(AC)
230
230
230
230
230
230
230
230
230
230

(DC)
300
300
300
300
300
300
300
300
300
300

3
5
7
8
10
12
14
18
20
25

Z251
Z251-08UL
Z251-21UL
Z251 - 21UL
Z251-40UL
Z251-55UL
Z251-72UL
Z251-90UL
Z251-130UL
Z251-260UL

250
250
250
250
250
250
250
250
250
250

330
330
330
330
330
330
330
330
330
330

Applied
Voltage

Maximum Ratings
Transient

Energy
10 x 1000 8 x 20
sec
sec
(J)
(J)
1.7
1.7
16
16
32
32
42
42
65
65
70
70
135
135
215
215
270
270
280
280
1.9
17
35
45
70
80
145
240
300
315

1.9
17
35
45
70
80
145
240
300
315

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
100
50
800
600
1750
1250
2400
1700
3500
2500
4500
3200
6000
4500
7500
6000
10000 6500
13000 9000
100
800
1750
2400
3500
4500
6000
7500
10000
13000

50
600
1250
1700
2500
3200
4500
6000
6500
9000

Electrical Characteristics
Max
Varistor
Clamping
Typical
Cap.
Voltage
Voltage
@1 mA DC
(@Test Current)
1 V rms
Vmin
Vmax
@1kHz
(8 x 20 sec)
(V)
397
(V)
(A)
(pF)
326
397
670
2
20
326
397
595
5
68
326
397
595
10
141
326
397
595
15
179
326
397
595
25
248
326
397
595
40
473
326
397
595
50
504
326
397
595
100
890
326
397
595
100
1134
326
397
595
100
2059
354
354
354
354
354
354
354
354
354
354

432
432
432
432
432
432
432
432
432
432

700
675
650
650
650
650
650
650
650
650

2
5
10
15
25
40
50
75
100
100

NOTES:
NOTES:
A = UL1449
FileAE86730
Transient Voltage
Surge and
Suppression
VDE/CECC
42000/42201
& IEC 1051
Appendix
lists the- single-pulse
peak current
energy ratings D
on=file
with the Safety
Agencies.
B = UL1414
File transient
E38785 -rating
Across
- The Line
Applications
E differ
= UL497B
- File shown
E180012
Maximum
specified
in this
table are valid. They may
from those
in Appendix A.
C = CSA
File
LR33458
70250.01 42000/42201 & IEC 1051
A = C22.2
UL1449
File
E86730 - Transient Voltage Surge Suppression F = SEV - 96.7
D = VDE/CECC
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D56
D58
D73
D68
D61
D62
D69
D63
D65
D66

0.322
[8.18]
0.423
[10.7]
0.479
[12.17]
0.519
[13.18]
0.597
[15.16]
0.715
[18.16]
0.775
[19.69]
0.937
[23.80]
1.030
[26.16]
1.250
[31.75]

0.197
[5.0]
0.298
[7.57]
0.354
[8.99]
0.394
[10.00]
0.472
[11.99]
0.590
[14.99]
0.650
[16.51]
0.812
[20.62]
0.905
[22.99]
1.100
[27.94]

0.160
[4.06]
0.200
[5.08]
0.200
[5.08]
0.200
[5.08]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.300
[7.62]
0.500
[12.7]

0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.040
[1.02]

OFFSET AND
230
VAC
Y
T
0.085 0.229
[2.16] [5.82]
0.090 0.229
[2.29] [5.82]
0.090 0.242
[2.29] [6.15]
0.090 0.242
[2.29] [6.15]
0.097 0.242
[2.46] [6.15]
0.097 0.242
[2.46] [6.15]
0.097 0.242
[2.46] [6.15]
0.097 0.242
[2.46] [6.15]
0.097 0.242
[2.46] [6.15]
0.105 0.230
[2.67] [5.84]

THICKNESS
250
VAC
Y
T
0.091 0.236
[2.31] [5.99]
0.096 0.236
[2.44] [5.99]
0.096 0.249
[1.52] [6.32]
0.096 0.249
[1.52] [6.32]
0.103 0.249
[2.62] [6.32]
0.103 0.249
[2.62] [6.32]
0.103 0.249
[2.62] [6.32]
0.103 0.249
[2.62] [6.32]
0.103 0.249
[2.62] [6.32]
0.111 0.237
[2.82] [6.02]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

10

18
62
131
165
229
437
465
822
1047
1901

STANDARD SERIES
SPECIFICATIONS

270 and 300 VAC Varistors


Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

Continuous
Nominal
Size

A B C D E F
D56ZOV271RA2R0
D58ZOV271RA09
D73ZOV271RA23
D68ZOV271RA23
D61ZOV271RA43
D62ZOV271RA60
D69ZOV271RA75
D63ZOV271RA100
D65ZOV271RA140
D6694ZOV271RA280

X
X X
X
X X
X X
X X
X X
X X
X X

X
X
X
X
X
X
X
X

D56ZOV301RA2R2
D58ZOV301RA10
D73ZOV301RA25
D68ZOV301RA25
D61ZOV301RA45
D62ZOV301RA65
D69ZOV301RA80
D63ZOV301RA105
D65ZOV301RA150
D6694ZOV301RA300

X
X X
X
X X
X X
X X
X X
X X
X X

X
X X X X
X
X X X X
X X X X
X X X X
X X X X
X X X X
X
X

X
X X X
X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X

Minimum
Marking

Maximum Ratings
Transient

Applied
Voltage

Energy

(mm)
3
5
7
8
10
12
14
18
20
25

Z271
Z271 -09UL
Z271 - 23UL
Z271 - 23UL
Z271 - 43UL
Z271 - 60UL
Z271 - 75UL
Z271 - 100UL
Z271 - 140UL
Z271 - 280UL

(AC)
270
270
270
270
270
270
270
270
270
270

(DC)
360
360
360
360
360
360
360
360
360
360

10 x 1000
sec
(J)
2
20
40
52
80
91
160
260
325
340

3
5
7
8
10
12
14
18
20
25

Z301
Z301 -10UL
Z301 - 25UL
Z301 - 25UL
Z301 - 45UL
Z301 - 65UL
Z301 - 80UL
Z301 - 105UL
Z301 - 150UL
Z301 - 300UL

300
300
300
300
300
300
300
300
300
300

390
390
390
390
390
390
390
390
390
390

2.2
21
42
55
85
105
175
280
350
360

8 x 20
sec
(J)
2
20
40
52
80
91
160
260
325
340
2.2
21
42
55
85
105
175
280
350
360

Electrical Characteristics

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
100
50
800
600
1750
1250
2400
1700
3500
2500
4500
3200
6000
4500
7500
6000
10000 6500
13000 9000
100
800
1750
2400
3500
4500
6000
7500
10000
13000

50
600
1250
1700
2500
3200
4500
6000
6500
9000

Varistor
Voltage
1 mA DC
Vmin
(V)
382
382
382
382
382
382
382
382
382
382

Vmax
(V)
466
466
466
466
466
466
466
466
466
466

425
425
425
425
425
425
425
425
425
425

518
518
518
518
518
518
518
518
518
518

Max Clamping
Voltage
(@Test Current)
(8 x 20 sec)
(V)
(A)
740
2
740
5
710
10
710
15
710
25
710
40
710
50
710
75
710
100
710
100
860
810
790
790
790
790
790
790
790
790

2
5
10
15
25
40
50
75
100
100

Typical
Cap.
1 V rms
@1kHz
(pF)
17
58
121
153
213
406
432
763
972
1765
15
52
108
137
190
363
386
682
869
1577

NOTES:
NOTES:
A = UL1449
File
E86730
- Transient Voltage
Surgeand
Suppression
D =the
VDE/CECC
42000/42201 & IEC 1051
Appendix
A lists
the single-pulse
peak current
energy ratings on file with
Safety Agencies.
B = UL1414
Filetransient
E38785rating
- Across
- The in
Line
E = those
UL497B
- FileinE180012
Maximum
specified
thisApplications
table are valid. They may differ from
shown
Appendix A.
C = CSA
C22.2 File
F =DSEV
- 96.7 70250.01
A = UL1449
FileLR33458
E86730 - Transient Voltage Surge Suppression
= VDE/CECC
42000/42201 & IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D56
D58
D73
D68
D61
D62
D69
D63
D65
D66

H
0.322
[8.18]
0.423
[10.7]
0.479
[12.17]
0.519
[13.18]
0.597
[15.16]
0.715
[18.16]
0.775
[19.69]
0.937
[23.80]
1.030
[26.16]
1.250
[31.75]

0.197 0.160
[5.0]
[4.06]
0.298 0.200
[7.57] [5.08]
0.354 0.200
[8.99] [5.08]
0.394 0.200
[10.00] [5.08]
0.472 0.300
[11.99] [7.62]
0.590 0.300
[14.99] [7.62]
0.650 0.300
[16.51] [7.62]
0.812 0.300
[20.62] [7.62]
0.905 0.300
[22.99] [7.62]
1.100 0.500
[27.94] [12.70]

d
0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.040
[10.2]

OFFSET AND
270
VAC
Y
T
0.098 0.245
[2.49] [6.22]
0.103 0.245
[2.62] [6.22]
0.103 0.257
[2.62] [6.53]
0.103 0.257
[2.62] [6.53]
0.110 0.257
[2.79] [6.53]
0.110 0.257
[2.79] [6.53]
0.110 0.257
[2.79] [6.53]
0.110 0.257
[2.79] [6.53]
0.110 0.257
[2.79] [6.53]
0.118 0.244
[3.00] [6.20]

THICKNESS
300
VAC
Y
T
0.105 0.255
[2.67] [6.48]
0.110 0.255
[2.79] [6.48]
0.110 0.268
[2.79] [6.81]
0.110 0.268
[2.79] [6.81]
0.117 0.268
[2.97] [6.81]
0.117 0.268
[2.97] [6.81]
0.117 0.268
[2.97] [6.81]
0.117 0.268
[2.97] [6.81]
0.149 0.268
[3.78] [6.81]
0.125 0.255
[3.18] [6.48]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

11

STANDARD SERIES
SPECIFICATIONS

320 and 360 VAC Varistors


Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

Continuous
Nominal
Size

A B C D E F
D56ZOV321RA2R4
D58ZOV321RA11
D73ZOV321RA27
D61ZOV321RA45
D62ZOV321RA70
D69ZOV321RA90
D63ZOV321RA110
D65ZOV321RA160
D6694ZOV321RA320

X
X
X
X
X
X
X
X

D56ZOV361RA2R7
D58ZOV361RA12
D73ZOV361RA28
D61ZOV361RA45
D62ZOV361RA70
D69ZOV361RA85
D63ZOV361RA110
D65ZOV361RA160
D6694ZOV361RA320

X
X
X
X
X
X
X
X

X
X
X
X
X
X
X

X
X
X
X

X
X
X
X
X
X
X

X
X
X
X
X
X X
X X

X
X
X
X
X
X
X
X

X
X
X
X
X

X
X
X
X
X

X
X
X
X
X
X
X
X

X
X
X
X
X

X
X
X
X
X

Minimum
Marking

Maximum Ratings
Transient

Applied
Voltage

Energy

(mm)
3
5
7
10
12
14
18
20
25

Z321
Z321 - 11UL
Z321 - 27UL
Z321 - 45UL
Z321 - 70UL
Z321 - 90UL
Z321 - 110UL
Z321 - 160UL
Z321 - 320UL

(AC)
320
320
320
320
320
320
320
320
320

(DC)
420
420
420
420
420
420
420
420
420

10 x 1000
sec
(J)
2.4
21
46
92
140
190
310
385
430

3
5
7
10
12
14
18
20
25

Z361
Z361 - 12UL
Z361 - 28UL
Z361 - 45UL
Z361 - 70UL
Z361 - 85UL
Z361 - 110UL
Z361 - 160UL
Z361 - 320UL

360
360
360
360
360
360
360
360
360

470
470
470
470
470
470
470
470
470

2.7
22
47
97
145
205
320
410
440

8 x 20
sec
(J)
2.4
21
46
92
140
190
310
385
430
2.7
22
47
97
145
205
320
410
440

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
100
50
800
600
1750
1250
3500
2500
4500
3200
6000
4500
7500
6000
10000 6500
13000 9000

Electrical Characteristics
Max
Varistor
Clamping
Typical
Cap.
Voltage
Voltage
@1 mA DC
(@Test Current)
1 V rms
Vmin
Vmax
@1kHz
(8 x 20 sec)
(V)
(V)
(V)
(A)
(pF)
453
553
860
2
14
453
553
850
5
49
453
553
850
10
102
453
553
850
25
179
453
553
850
40
341
453
553
850
50
363
453
553
850
75
641
453
553
850
100
816
453
553
850
100
1483

100
800
1750
3500
4500
6000
7500
10000
13000

522
522
522
522
522
522
522
522
522

50
600
1250
2500
3200
4500
6000
6500
9000

638
638
638
638
638
638
638
638
638

1020
960
960
960
960
960
960
960
960

2
5
10
25
40
50
75
100
100

NOTES:
NOTES:
A = UL1449
FileAE86730
Transient Voltage
Surge and
Suppression
D =the
VDE/CECC
42000/42201 & IEC 1051
Appendix
lists the-single-pulse
peak current
energy ratings on file with
Safety Agencies.
B = UL1414
File transient
E38785 -rating
Across
- The Line
Applications
E = those
UL497B
- FileinE180012
Maximum
specified
in this
table are valid. They may differ from
shown
Appendix A.
C = CSA
File
LR33468
F =D SEV
- 96.7 70250.01
A = C22.2
UL1449
File
E86730 - Transient Voltage Surge Suppression
= VDE/CECC
42000/42201 & IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions: Inches [mm]
Size
code
D56
D58
D73
D61
D62
D69
D63
D65
D66

H
0.322
[8.18]
0.423
[10.7]
0.479
[12.17]
0.597
[15.16]
0.715
[18.16]
0.775
[19.69]
0.937
[23.80]
1.030
[26.16]
1.250
[31.75]

0.197 0.160
[5.0]
[4.06]
0.298 0.200
[7.57] [5.08]
0.354 0.200
[8.99] [5.08]
0.472 0.300
[11.99] [7.62]
0.590 0.300
[14.99] [7.62]
0.650 0.300
[16.51] [7.62]
0.812 0.300
[20.62] [7.62]
0.905 0.300
[22.99] [7.62]
1.100 0.500
[27.94] [12.70]

d
0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.040
[10.2]

OFFSET AND
320
VAC
Y
T
0.114 0.264
[2.90] [6.71]
0.119 0.264
[3.02] [6.71]
0.114 0.272
[2.90] [6.91]
0.153 0.276
[3.89] [7.01]
0.153 0.276
[3.89] [7.01]
0.153 0.276
[3.89] [7.01]
0.153 0.276
[3.89] [7.01]
0.153 0.276
[3.89] [7.01]
0.161 0.267
[4.09] [6.78]

THICKNESS
360
VAC
Y
T
0.122 0.272
[3.10] [6.91]
0.127 0.272
[3.22] [6.91]
0.127 0.285
[3.22] [7.24]
0.161 0.281
[4.09] [7.14]
0.163 0.286
[4.14] [7.14]
0.202 0.281
[5.13] [7.14]
0.153 0.276
[3.89] [7.01]
0.159 0.281
[4.04] [7.14]
0.169 0.275
[4.29] [6.99]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

12

12
42
88
154
294
313
553
704
1278

STANDARD SERIES
SPECIFICATIONS

390 and 420 VAC Varistors


Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

Continuous
Nominal
Size

A B C D E F
D56ZOV391RA2R9
D58ZOV391RA13
D73ZOV391RA29
D61ZOV391RA45
D62ZOV391RA70
D69ZOV391RA85
D63ZOV391RA110
D65ZOV391RA150
D6694ZOV391RA320

X
X
X X X
X
X
X X X X
X
X X X X
X
X X X X
X
X X X X
X
X X X X
X
X
X

D56ZOV421RA3R2
D58ZOV421RA14
D73ZOV421RA30
D61ZOV421RA45
D62ZOV421RA70
D69ZOV421RA90
D63ZOV421RA110
D65ZOV421RA160
D6694ZOV421RA320

X
X
X
X
X
X
X
X

X
X
X
X
X
X
X

X
X
X
X
X
X
X

X
X
X
X
X

X
X
X
X
X
X
X
X

X
X
X
X
X

Minimum
Marking

Maximum Ratings
Transient

Applied
Voltage

Energy

(mm)
3
5
7
10
12
14
18
20
25

Z391
Z391 - 13UL
Z391-29UL
Z391-45UL
Z391-70UL
Z391-85UL
Z391-110UL
Z391-150UL
Z391-320UL

(AC)
390
390
390
390
390
390
390
390
390

(DC)
500
500
500
505
500
505
500
505
505

10 x 1000
sec
(J)
2.9
25
51
107
150
215
330
420
460

3
5
7
10
12
14
18
20
25

Z421
Z421 - 14UL
Z421-30UL
Z421-45UL
Z421-70UL
Z421-90UL
Z421-110UL
Z421-160UL
Z421-320UL

420
420
420
420
420
420
420
420
420

560
560
560
560
560
560
560
560
560

3.2
26
57
110
156
225
340
430
480

8 x 20
sec
(J)
2.9
25
51
107
150
215
330
420
460
3.2
26
57
110
156
225
340
430
480

Electrical Characteristics

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
100
50
800
600
1750
1250
3500
2500
4500
3200
6000
4500
7500
6000
10000 6500
13000 9000
100
800
1750
3500
4500
6000
7500
10000
13000

50
600
1250
2500
3200
4500
6000
6500
9000

Varistor
Voltage
@1 mA DC
Vmin
(V)
552
552
552
552
552
552
552
552
552

Vmax
(V)
674
674
674
674
674
674
674
674
674

594
594
594
594
594
594
594
594
594

725
725
725
725
725
725
725
725
725

Max Clamping
Voltage
(@Test Current)
(8 x 20 sec)
(V)
(A)
1090
2
1040
5
1040
10
1025
25
1025
40
1025
50
1025
75
1025
100
1025
100
1140
1130
1120
1120
1120
1120
1120
1120
1120

2
5
10
25
40
50
75
100
100

Typical
Cap.
1 V rms
@1kHz
(pF)
12
40
83
146
278
297
524
667
1211
11
37
77
136
258
275
486
618
1123

NOTES:
NOTES:
A = UL1449
FileAE86730
Transient Voltage
Surge Suppression
D = VDE/CECC
Appendix
lists the- single-pulse
peak current
and energy ratings on file with the Safety
Agencies. 42000/42201 & IEC 1051
B = UL1414
File transient
E38785 -rating
Across
- The Line
Applications
= UL497B
- File E180012
Maximum
specified
in this
table are valid. They may differ from thoseE shown
in Appendix
A.
C = CSA
FileFile
LR33458
F = SEV - 42000/42201
96.7 70250.01
A =C22.2
UL1449
E86730 - Transient Voltage Surge Suppression
D = VDE/CECC
& IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D56
D58
D73
D61
D62
D69
D63
D65
D66

H
0.322
[8.18]
0.423
[10.7]
0.479
[12.17]
0.597
[15.16]
0.715
[18.16]
0.775
[19.69]
0.937
[23.80]
1.030
[26.16]
1.250
[31.75]

0.197 0.160
[5.0]
[4.06]
0.298 0.200
[7.57] [5.08]
0.354 0.200
[8.99] [5.08]
0.472 0.300
[11.99] [7.62]
0.590 0.300
[14.99] [7.62]
0.650 0.300
[16.51] [7.62]
0.812 0.300
[20.62] [7.62]
0.905 0.300
[22.99] [7.62]
1.100 0.500
[27.94] [12.70]

d
0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.040
[10.2]

OFFSET AND
390
VAC
Y
T
0.125 0.275
[3.18] [6.99]
0.130 0.275
[3.30] [6.99]
0.130 0.290
[3.30] [7.37]
0.167 0.291
[4.24] [7.39]
0.167 0.290
[4.24] [7.37]
0.167 0.291
[4.24] [7.37]
0.153 0.276
[3.89] [7.01]
0.167 0.291
[4.24] [7.37]
0.175 0.291
[4.45] [7.37]

THICKNESS
420
VAC
Y
T
0.133 0.313
[3.38] [7.95]
0.138 0.313
[3.50] [7.95]
0.138 0.296
[3.50] [7.52]
0.177 0.313
[4.50] [7.95]
0.177 0.313
[4.50] [7.95]
0.177 0.313
[4.50] [7.95]
0.177 0.313
[4.50] [7.95]
0.177 0.313
[4.50] [7.95]
0.185 0.282
[4.70] [7.16]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

13

STANDARD SERIES
SPECIFICATIONS

460 and 480 VAC Varistors


Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

Continuous
Nominal
Size

A B C D E F
D58ZOV461RA17
D61ZOV461RA50
D62ZOV461RA75
D69ZOV461RA100
D63ZOV461RA120
D65ZOV461RA175
D6694ZOV461RA340

X
X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X

D56ZOV481RA3R6
D61ZOV481RA50
D62ZOV481RA80
D69ZOV481RA105
D63ZOV481RA130
D65ZOV481RA180
D6694ZOV481RA360

X
X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X

Minimum
Marking

Maximum Ratings
Transient

Applied
Voltage

Energy

(mm)
5
10
12
14
18
20
25

Z461 - 17
Z461-50UL
Z461-75UL
Z461-100UL
Z461-120UL
Z461-175UL
Z461-340UL

(AC)
460
460
460
460
460
460
460

(DC)
615
615
615
615
615
615
615

10 x 1000
sec
(J)
25
115
162
230
360
450
500

3
10
12
14
18
20
25

Z481
Z481-50UL
Z481-80UL
Z481-105UL
Z481-130UL
Z481-180UL
Z481-360UL

480
480
480
480
480
480
480

640
640
640
640
640
640
640

3.6
120
167
235
365
460
510

8 x 20
sec
(J)
25
115
162
230
360
450
500
3.6
120
167
235
365
460
510

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
800
600
3500
2500
4500
3200
6000
4500
7500
6000
10000 6500
13000 9000
100
3500
4500
6000
7500
10000
13000

50
2500
3200
4500
6000
6500
9000

Electrical Characteristics
Max
Varistor
Clamping
Typical
Voltage
Voltage
Cap.
@1 mA DC
(@Test Current)
1 V rms
Vmin
Vmax
@1kHz
(8 x 20 sec)
(V)
(V)
(V)
(A)
(pF)
651
795
1240
5
34
651
795
1240
25
124
651
795
1240
40
236
651
795
1240
50
251
651
795
1240
75
443
651
795
1240
100
565
651
795
1240
100
1025
679
679
679
679
679
679
679

829
829
829
829
829
829
829

1370
1300
1300
1300
1300
1300
1300

2
25
40
50
75
100
100

NOTES:
Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies.
Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A.
A = UL1449 File E86730 - Transient Voltage Surge Suppression
D = VDE/CECC 42000/42201 & IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D56
D58
D61
D62
D69
D63
D65
D66

H
0.322
[8.18]
0.423
[10.7]
0.597
[15.16]
0.715
[18.16]
0.775
[19.69]
0.937
[23.80]
1.030
[26.16]
1.250
[31.75]

0.197 0.160
[5.0]
[4.06]
0.298 0.200
[7.57] [5.08]
0.472 0.300
[11.99] [7.62]
0.590 0.300
[14.99] [7.62]
0.650 0.300
[16.51] [7.62]
0.812 0.300
[20.62] [7.62]
0.905 0.300
[22.99] [7.62]
1.100 0.500
[27.94] [12.70]

d
0.020
[0.51]
0.025
[0.64]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.040
[1.02]

OFFSET AND THICKNESS


460
480
VAC
VAC
Y
T
Y
T
0.150 0.329
N/A
N/A
[3.81] [8.36]
0.150 0.313
N/A
N/A
[3.81] [7.95]
0.189 0.322 0.194 0.329
[4.80] [8.18] [4.93] [8.36]
0.188 0.324 0.194 0.336
[4.78] [8.23] [4.93] [8.53]
0.189 0.322 0.194 0.336
[4.80] [8.18] [4.93] [8.53]
0.188 0.324 0.194 0.336
[4.78] [8.23] [4.93] [8.53]
0.189 0.322 0.194 0.336
[4.80] [8.18] [4.93] [8.53]
0.197 0.322 0.202 0.300
[5.00] [8.18] [5.13] [7.62]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

14

10
119
227
242
427
544
989

STANDARD SERIES
SPECIFICATIONS

510 and 550 VAC Varistors


Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

Continuous
Nominal
Size

D61ZOV511RA55
D62ZOV511RA85
D69ZOV511RA110
D63ZOV511RA140
D65ZOV511RA190
D6694ZOV511RA380

A
X
X
X
X
X
X

B
X
X
X
X
X
X

C
X
X
X
X
X
X

D
X
X
X
X
X

E
X
X
X
X
X
X

F
X
X
X
X
X

(mm)
10
12
14
18
20
25

D61ZOV551RA60
D62ZOV551RA90
D69ZOV551RA115
D63ZOV551RA145
D65ZOV551RA200
D6694ZOV551RA400

X
X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X

10
12
14
18
20
25

Minimum
Marking

Maximum Ratings
Transient

Applied
Voltage

Energy

Z511-55UL
Z511-85UL
Z511-110UL
Z511-140UL
Z511-190UL
Z511-380UL

(AC)
510
510
510
510
510
510

(DC)
675
675
675
675
675
675

10 x 1000
sec
(J)
125
172
240
375
470
525

Z551-60UL
Z551-90UL
Z551-115UL
Z551-145UL
Z551-200UL
Z551-400UL

550
550
550
550
550
550

700
700
700
700
700
700

130
192
255
405
510
540

8 x 20
sec
(J)
125
172
240
375
470
525
130
192
255
405
510
540

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
3500
2500
4500
3200
6000
4500
7500
6000
10000 6500
13000 9000
3500
4500
6000
7500
10000
13000

2500
3200
4500
6000
6500
9000

Electrical Characteristics
Max
Clamping
Typical
Cap.
Voltage
(@Test Current)
1 V rms
Vmax
(8 x 20s)
@1kHz
(V)
(V)
(A)
(pF)
881
1350
25
112
881
1350
40
213
881
1350
50
227
881
1350
75
401
881
1350
100
510
881
1350
100
927

Varistor
Voltage
@1 mA DC
Vmin
(V)
722
722
722
722
722
722
778
778
778
778
778
778

950
950
950
950
950
950

1400
1400
1400
1400
1400
1400

25
40
50
75
100
100

104
198
211
373
475
862

NOTES:
Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies.
Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A.
A = UL1449 File E86730 - Transient Voltage Surge Suppression
D = VDE/CECC 42000/42201 & IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D61
D62
D69
D63
D65
D66

H
0.597
[15.16]
0.715
[18.16]
0.775
[19.69]
0.937
[23.80]
1.030
[26.16]
1.250
[31.75]

0.472 0.300
[11.99] [7.62]
0.590 0.300
[14.99] [7.62]
0.650 0.300
[16.51] [7.62]
0.812 0.300
[20.62] [7.62]
0.905 0.300
[22.99] [7.62]
1.100 0.500
[27.94] [12.70]

d
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.040
[10.2]

OFFSET AND
510
VAC
Y
T
0.201 0.347
[5.11] [8.81]
0.201 0.347
[5.11] [8.81]
0.201 0.347
[5.11] [8.81]
0.201 0.347
[5.11] [8.81]
0.201 0.347
[5.11] [8.81]
0.209 0.310
[5.31] [7.87]

THICKNESS
550
VAC
Y
T
0.216 0.362
[5.49] [9.19]
0.216 0.362
[5.49] [9.19]
0.216 0.362
[5.49] [9.19]
0.216 0.362
[5.49] [9.19]
0.216 0.362
[5.49] [9.19]
0.224 0.323
[5.69] [8.20]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

15

STANDARD SERIES
SPECIFICATIONS

580 and 620 VAC Varistors


Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

Continuous
Nominal
Size

D61ZOV581RA65
D62ZOV581RA95
D69ZOV581RA120
D63ZOV581RA160
D65ZOV581RA220
D6694ZOV581RA440

A
X
X
X
X
X
X

B
X
X
X
X
X

C
X
X
X
X
X
X

D E F
X
X
X
X
X
X
X
X
X
X

D61ZOV621RA65
D62ZOV621RA100
D69ZOV621RA130
D63ZOV621RA170
D65ZOV621RA230
D6694ZOV621RA460

X
X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X
X

X
X
X
X
X

Minimum
Marking

Maximum Ratings
Transient

Applied
Voltage

Energy

(mm)
10
12
14
18
20
25

Z581 - 65UL
Z581 - 95UL
Z581 - 120UL
Z581 - 160UL
Z581 - 220UL
Z581 - 440UL

(AC)
580
580
580
580
580
580

(DC)
735
735
735
735
735
735

10 x 1000
sec
(J)
140
202
265
425
530
560

10
12
14
18
20
25

Z621 - 65UL
Z621 - 100UL
Z621 - 130UL
Z621 - 170UL
Z621 - 230UL
Z621 - 460UL

620
620
620
620
620
620

800
800
800
800
800
800

145
215
290
450
565
600

X
X
X
X
X

8 x 20
sec
(J)
140
202
265
425
530
560
145
215
290
450
565
600

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
3500
2500
4500
3200
6000
4500
7500
6000
10000 6500
13000 9000
3500
4500
6000
7500
10000
13000

2500
3200
4500
6000
6500
9000

Electrical Characteristics
Max
Varistor
Clamping
Typical
Cap.
Voltage
Voltage
@1 mA DC
(@Test Current)
1 V rms
Vmin
Vmax
@1kHz
(8 x 20 sec)
(V)
(V)
(V)
(A)
(pF)
821
1002
1500
25
98
821
1002
1500
40
187
821
1002
1500
50
199
821
1002
1500
75
352
821
1002
1500
100
449
821
1002
1500
100
815
877
877
877
877
877
877

1071
1071
1071
1071
1071
1071

1650
1650
1650
1650
1650
1650

25
40
50
75
100
100

NOTES:
NOTES:
A = UL1449
FileA E86730
Transient Voltage
Surge and
Suppression
D = Agencies.
VDE/CECC 42000/42201 & IEC 1051
Appendix
lists the -single-pulse
peak current
energy ratings on file with the Safety
B = UL1414
Filetransient
E38785 rating
- Across
- The Line
Applications
= UL497B
- File E180012
Maximum
specified
in this
table are valid. They may differ from thoseEshown
in Appendix
A.
C = CSA
File
LR33458
F = SEV -42000/42201
96.7 70250.01
A = C22.2
UL1449
File
E86730 - Transient Voltage Surge Suppression
D = VDE/CECC
& IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D61
D62
D69
D63
D65
D66

H
0.597
[15.16]
0.715
[18.16]
0.775
[19.69]
0.937
[23.80]
1.030
[26.16]
1.250
[31.75]

0.472 0.300
[11.99] [7.62]
0.590 0.300
[14.99] [7.62]
0.650 0.300
[16.51] [7.62]
0.812 0.300
[20.62] [7.62]
0.905 0.300
[22.99] [7.62]
1.100 0.500
[27.94] [12.70]

d
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.040
[1.02]

OFFSET AND
580
VAC
Y
T
0.224 0.373
[5.69] [9.47]
0.224 0.373
[5.69] [9.47]
0.224 0.373
[5.69] [9.47]
0.224 0.373
[5.69] [9.47]
0.224 0.373
[5.69] [9.47]
0.232 0.332
[5.89] [8.43]

THICKNESS
620
VAC
Y
T
0.302 0.381
[7.67] [9.68]
0.231 0.385
[5.87] [9.78]
0.231 0.388
[5.87] [9.86]
0.231 0.388
[5.87] [9.86]
0.231 0.388
[5.87] [9.86]
0.239 0.345
[6.07] [8.76]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

16

92
175
186
329
419
761

STANDARD SERIES
SPECIFICATIONS

680 and 750 VAC Varistors


Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

D61ZOV681RA70
D62ZOV681RA105
D69ZOV681RA150
D63ZOV681RA200
D65ZOV681RA260
D6694ZOV681RA520

A
X
X
X
X
X
X

B
X
X
X

C
X
X
X
X
X X
X

D69ZOV751RA165
D63ZOV751RA220
D65ZOV751RA290
D6694ZOV751RA560

X
X
X
X X

Continuous
Nominal
Size

D E F
X
X
X
X
X
X
X
X
X
X

X X
X X
X X
X

X
X
X

(mm)
10
12
14
18
20
25
14
18
20
25

Minimum
Marking

Maximum Ratings
Transient

Applied
Voltage

Energy

Z681 - 70UL
Z681 - 105UL
Z681 - 150UL
Z681 - 200UL
Z681 - 260UL
Z681 - 520UL

(AC)
680
680
680
680
680
680

(DC)
860
860
860
860
860
860

10 x 1000
sec
(J)
155
232
310
500
620
655

Z751
Z751
Z751
Z751

750
750
750
750

900
900
900
900

350
540
670
700

165UL
220UL
290UL
560UL

8 x 20
sec
(J)
155
232
310
500
620
655
350
540
670
700

Electrical Characteristics

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
3500
2500
4500
3200
6000
4500
7500
6000
10000 6500
13000 9000

Vmin
(V)
962
962
962
962
962
962

Vmax
(V)
1175
1175
1175
1175
1175
1175

(8 x 20 sec)
(V)
(A)
1800
25
1800
40
1800
50
1800
75
1800
100
1800
100

6000
7500
10000
13000

1062
1062
1062
1062

1300
1300
1300
1300

2100
2100
2100
2100

4500
6000
6500
9000

Varistor
Voltage
@1 mA DC

Max Clamping
Voltage
(@Test Current)

50
75
100
100

Typical
Cap.
1 V rms
@1kHz
(pF)
84
160
170
300
382
694
151
267
340
618

NOTES:
Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies.
Maximum transient ratings specified in this table are valid. They may differ from those shown in Appendix A.
A = UL1449 File E86730 - Transient Voltage Surge Suppression
D = VDE/CECC 42000/42201 & IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
Size
code
D61
D62
D69
D63
D65
D66

H
0.597
[15.16]
0.715
[18.16]
0.775
[19.69]
0.937
[23.80]
1.030
[26.16]
1.250
[31.75]

0.472 0.300
[11.99] [7.62]
0.590 0.300
[14.99] [7.62]
0.650 0.300
[16.51] [7.62]
0.812 0.300
[20.62] [7.62]
0.905 0.300
[22.99] [7.62]
1.100 0.500
[27.94] [12.70]

d
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.040
[10.2]

OFFSET AND
680
VAC
Y
T
0.247 0.405
[6.27] [10.29]
0.247 0.411
[6.27] [10.44]
0.247 0.411
[6.27] [10.44]
0.247 0.411
[6.27] [10.44]
0.247 0.411
[6.27] [10.44]
0.255 0.369
[6.48] [9.37]

THICKNESS
750
VAC
Y
T
N/A

N/A

N/A

N/A

0.247
[6.27]
0.266
[6.76]
0.247
[5.46]
0.312
[7.92]

0.411
[10.44]
0.437
[11.10]
0.411
[10.44]
0.325
[8.26]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

17

STANDARD SERIES
SPECIFICATIONS

1000 VAC Varistors


1000 VAC Varistors
Recognitions
To
Safety
Agency
Standards

Maida
Style
Number

D69ZOV102RA220
D63ZOV102RA280
D65ZOV102RA360
D6694ZOV102RA720

A
X
X
X
X

B
X
X
X
X

C
X
X
X
X

D E F
X
X
X
X
X
X

Continuous
Nominal
Size

(mm)
14
18
20
25

Minimum
Marking

Applied
Voltage

Z102-220UL
Z102-280UL
Z102-360UL
Z102-720UL

(AC)
1000
1000
1000
1000

(DC)
1200
1200
1200
1200

Maximum Ratings
Tranisent
Energy
10 x 1000
sec
(J)
510
690
860
875

8 x 20
sec
(J)
510
690
860
875

Peak
Current
8 x 20 sec
# Pulses
1
2
(A)
(A)
6000 4500
7500 6000
10000 6500
13000 9000

Electrical Characteristics
Max
Varistor
Clamping
Typical
Voltage
Voltage
Cap.
@1 mA DC
(@Test Current)
1 V rms
Vmin
Vmax
@1kHz
(8 x 20 sec)
(V)
(V)
(V)
(A)
(pF)
1414
1728
2700
50
115
1414
1728
2700
75
204
1414
1728
2700
100
259
1414
1728
2700
100
471

NOTES:
Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies.
Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A.
A = UL1449 File E86730 - Transient Voltage Surge Suppression
D = VDE/CECC 42000/42201 & IEC 1051
B = UL1414 File E38785 - Across - The Line Applications
E = UL497B - File E180012
C = CSA C22.2 File LR33468
F = SEV - 96.7 70250.01

Standard Dimensions: Inches (mm)


Standard Dimensions : Inches [mm]
OFFSET AND THICKNESS

Size
code
D69
D63
D65
D66

H
0.775
[19.69]
0.937
[23.80]
1.030
[26.16]
1.250
[31.75]

0.650 0.300
[16.51] [7.62]
0.812 0.300
[20.62] [7.62]
0.905 0.300
[22.99] [7.62]
1.100 0.500
[27.94] [12.70]

1000
VAC

d
0.032
[0.81]
0.032
[0.81]
0.032
[0.81]
0.040
[1.02]

Y
0.364
[9.25]
0.364
[9.25]
0.364
[9.25]
0.372
[9.45]

T
0.531
[13.49]
0.531
[13.49]
0.531
[13.49]
0.435
[11.05]

Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.

18

STANDARD SERIES
LEAD CODES

19

STANDARD SERIES
LEAD CODES

20

NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.

DISK
d
*LEAD
**Y +/"X" +/- 0.040" Resultant
THICK
LEAD
OFFSET
0.030"
for Nominal "Z" Lead
NOM.
DIA.
(each lead)
0.160
0.197
0.296
20 0.033
0.025
0.058
0.149
0.188
0.290
25 0.039
0.025
0.064
0.147
0.186
0.289
30 0.043
0.025
0.068
0.145
0.185
0.288
35 0.056
0.025
0.081
0.138
0.180
0.285
40 0.028
0.025
0.053
0.151
0.190
0.291
50 0.020
0.025
0.045
0.154
0.192
0.293
60 0.024
0.025
0.049
0.152
0.191
0.292
75 0.028
0.025
0.053
0.151
0.190
0.291
95 0.031
0.025
0.056
0.150
0.189
0.291
120 0.031
0.025
0.056
0.150
0.189
0.291
130 0.031
0.025
0.056
0.150
0.189
0.291
140 0.033
0.025
0.058
0.149
0.188
0.290
150 0.036
0.025
0.061
0.148
0.187
0.290
180 0.042
0.025
0.067
0.145
0.185
0.288
210 0.050
0.025
0.075
0.141
0.182
0.286
230 0.054
0.025
0.079
0.139
0.180
0.285
250 0.059
0.025
0.084
0.136
0.178
0.284
270 0.063
0.025
0.088
0.134
0.176
0.283
300 0.071
0.025
0.096
0.128
0.172
0.280
320 0.075
0.025
0.016
0.100
0.125
0.170
0.279
360 0.087
0.025
0.016
0.112
0.114
0.162
0.274
390 0.092
0.025
0.016
0.117
0.109
0.158
0.272
420 0.099
0.025
0.016
0.124
0.101
0.153
0.269
460 0.109
0.025
0.016
0.134
0.087
0.144
0.264
480 0.113
0.025
0.016
0.138
0.081
0.141
0.262
*
Lead stepped away from disk at lead egress.
** Lead displacement including disk thickness, wire diameter, and lead offset.
*** Includes disk, wire, coating, and lead offset (if indicated).

VOLTS
AC

Dimension
Spacing
0.394
0.492
0.390
0.489
0.389
0.454
0.388
0.455
0.386
0.457
0.390
0.453
0.391
0.452
0.391
0.452
0.390
0.453
0.390
0.453
0.390
0.453
0.390
0.453
0.390
0.453
0.389
0.454
0.388
0.454
0.387
0.456
0.386
0.456
0.385
0.457
0.384
0.458
0.382
0.460
0.381
0.461
0.378
0.463
0.376
0.464
0.374
0.466
0.371
0.469
0.369
0.470
No Code
7
H MAX. H MAX.
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322
0.322

10
H MAX.
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397
0.397

HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES


11
20
21
23
44
58
93
H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322
0.397
0.397
0.322
0.322

3mm Zinc Oxide Varistor Dimensions


94
H MAX.

D3
H MAX.

D7
H MAX.

***T
MAX.
0.176
0.182
0.190
0.199
0.211
0.174
0.243
0.184
0.191
0.201
0.204
0.208
0.212
0.223
0.220
0.229
0.236
0.245
0.255
0.264
0.272
0.275
0.313
0.313
0.329

D
MAX.
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197

STANDARD SERIES
MECHANICAL DIMENSIONS

21

22

DISK
THICK
NOM.

d
LEAD
DIA.

*LEAD
OFFSET
(each lead)

**Y +/0.030"

0.290
0.289
0.288
0.286
0.291
0.293
0.292
0.291
0.291
0.291
0.291
0.290
0.290
0.288
0.286
0.285
0.284
0.283
0.280
0.265
0.259
0.256
0.252
0.242

NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.

and lead offset.

0.188
0.186
0.185
0.182
0.189
0.192
0.191
0.189
0.189
0.189
0.189
0.188
0.187
0.185
0.182
0.180
0.178
0.176
0.172
0.146
0.134
0.129
0.120
0.100

0.390
0.389
0.388
0.387
0.390
0.391
0.391
0.390
0.390
0.390
0.390
0.390
0.389
0.388
0.387
0.386
0.385
0.384
0.382
0.371
0.367
0.365
0.362
0.355

0.489
0.488
0.487
0.486
0.489
0.490
0.489
0.489
0.489
0.489
0.489
0.489
0.488
0.487
0.486
0.486
0.485
0.484
0.483
0.474
0.470
0.469
0.467
0.462

"X" +/- 0.040" Resultant Dimension


for Nominal "Z" Lead Spacing
0.197
0.296
0.394
0.492

0.160

20 0.033
0.025
0.058
0.149
25 0.039
0.025
0.064
0.147
30 0.043
0.025
0.068
0.145
35 0.051
0.025
0.076
0.141
40 0.030
0.025
0.055
0.150
50 0.020
0.025
0.045
0.154
60 0.025
0.025
0.050
0.152
75 0.031
0.025
0.056
0.150
95 0.031
0.025
0.056
0.150
120 0.031
0.025
0.056
0.150
130 0.031
0.025
0.056
0.150
140 0.033
0.025
0.058
0.149
150 0.036
0.025
0.061
0.148
180 0.042
0.025
0.067
0.145
210 0.050
0.025
0.075
0.141
230 0.054
0.025
0.079
0.139
250 0.059
0.025
0.084
0.136
270 0.063
0.025
0.088
0.134
300 0.071
0.025
0.096
0.128
320 0.075
0.025
0.016
0.132
360 0.087
0.025
0.016
0.144
390 0.092
0.025
0.016
0.149
420 0.099
0.025
0.016
0.156
480 0.113
0.025
0.016
0.170
*
Lead stepped away from disk at lead egress.
** Lead displacement including disk thickness, wire diameter,
*** Includes disk, wire, coating, and lead offset (if indicated).

VOLTS
AC

0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423

0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423

No Code
7
H MAX. H MAX.
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498

10
H MAX.
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498

0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498
0.498

0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423

0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423
0.423

HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES


11
20
21
23
44
58
93
H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.

5mm Zinc Oxide Varistor Dimensions


94
H MAX.

D3
H MAX.

D7
H MAX.

0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298
0.298

D
MAX.

0.176
0.182
0.190
0.199
0.211
0.174
0.243
0.184
0.191
0.201
0.204
0.208
0.212
0.223
0.220
0.229
0.236
0.245
0.255
0.264
0.272
0.275
0.313
0.329

***T
MAX.

STANDARD SERIES

MECHANICAL DIMENSIONS

DISK
THICK
NOM.

d
LEAD
DIA.

*LEAD
OFFSET
(each lead)

**Y +/0.030"

0.288
0.285
0.281
0.290
0.289
0.288
0.286
0.291
0.293
0.292
0.291
0.291
0.291
0.291
0.290
0.290
0.288
0.286
0.285
0.284
0.283
0.280
0.265
0.263
0.261
0.259
0.257
0.256
0.252
0.252
0.245
0.242
0.237
0.230
0.224
0.219

NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.

and lead offset.

0.184
0.180
0.174
0.188
0.186
0.185
0.182
0.189
0.192
0.191
0.189
0.189
0.189
0.189
0.188
0.187
0.185
0.182
0.180
0.178
0.176
0.172
0.146
0.143
0.139
0.134
0.132
0.129
0.122
0.120
0.106
0.100

0.388
0.386
0.383
0.390
0.389
0.388
0.387
0.390
0.391
0.391
0.390
0.390
0.390
0.390
0.390
0.389
0.388
0.387
0.386
0.385
0.384
0.382
0.371
0.370
0.368
0.367
0.366
0.365
0.362
0.362
0.357
0.355
0.352
0.347
0.343
0.340

0.487
0.485
0.483
0.489
0.488
0.487
0.486
0.489
0.490
0.489
0.489
0.489
0.489
0.489
0.489
0.488
0.487
0.486
0.486
0.485
0.484
0.483
0.474
0.473
0.472
0.470
0.470
0.469
0.467
0.467
0.463
0.462
0.459
0.455
0.452
0.450

0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479

0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479

No Code
7
H MAX. H MAX.
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554

10
H MAX.
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554

0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554
0.554

0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479

0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479
0.479

HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES


11
20
21
23
44
58
93
H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.

7mm Zinc Oxide Varistor Dimensions


"X" +/- 0.040" Resultant Dimension
for Nominal "Z" Lead Spacing
0.197
0.296
0.394
0.492

0.160

11 0.045
0.025
0.070
0.144
14 0.055
0.025
0.080
0.139
17 0.068
0.025
0.093
0.130
20 0.033
0.025
0.058
0.149
25 0.039
0.025
0.064
0.147
30 0.043
0.025
0.068
0.145
35 0.051
0.025
0.076
0.141
40 0.030
0.025
0.055
0.150
50 0.020
0.025
0.045
0.154
60 0.025
0.025
0.050
0.152
75 0.031
0.025
0.056
0.150
95 0.031
0.025
0.056
0.150
120 0.031
0.025
0.056
0.150
130 0.031
0.025
0.056
0.150
140 0.033
0.025
0.058
0.149
150 0.036
0.025
0.061
0.148
180 0.042
0.025
0.067
0.145
210 0.050
0.025
0.075
0.141
230 0.054
0.025
0.079
0.139
250 0.059
0.025
0.084
0.136
270 0.063
0.025
0.088
0.134
300 0.071
0.025
0.096
0.128
320 0.075
0.025
0.016
0.132
330 0.078
0.025
0.016
0.135
350 0.083
0.025
0.016
0.140
360 0.087
0.025
0.016
0.144
370 0.089
0.025
0.016
0.146
390 0.092
0.025
0.016
0.149
400 0.098
0.025
0.016
0.155
420 0.099
0.025
0.016
0.156
460 0.109
0.025
0.016
0.166
480 0.113
0.025
0.016
0.170
510 0.120
0.025
0.016
0.177
550 0.129
0.025
0.016
0.186
580 0.137
0.025
0.016
0.194
600 0.142
0.025
0.016
0.199
*
Lead stepped away from disk at lead egress.
** Lead displacement including disk thickness, wire diameter,
*** Includes disk, wire, coating, and lead offset (if indicated).

VOLTS
AC

7MM ZINC OXIDE VARISTOR DIMENSIONS


94
H MAX.

D3
H MAX.

D7
H MAX.

0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354
0.354

D
MAX.

0.161
0.165
0.170
0.176
0.182
0.190
0.199
0.211
0.174
0.243
0.184
0.191
0.201
0.204
0.208
0.212
0.223
0.220
0.229
0.236
0.245
0.255
0.264
0.275
0.283
0.272
0.287
0.275
0.298
0.313
0.313
0.329
0.347
0.362
0.373
0.385

***T
MAX.

STANDARD SERIES
MECHANICAL DIMENSIONS

23

24

DISK
THICK
NOM.

d
LEAD
DIA.

*LEAD
OFFSET
(each lead)

**Y +/0.030"

0.286
0.283
0.279
0.289
0.287
0.286
0.284
0.289
0.291
0.290
0.289
0.289
0.289
0.289
0.289
0.288
0.287
0.284
0.283
0.282
0.280
0.278
0.261
0.260
0.257
0.255
0.253
0.252
0.248
0.247
0.240
0.237
0.232
0.224
0.217
0.213
0.209
0.192

NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.

and lead offset.

0.181
0.177
0.170
0.186
0.184
0.182
0.179
0.186
0.190
0.189
0.187
0.187
0.187
0.187
0.186
0.185
0.183
0.179
0.177
0.175
0.173
0.168
0.140
0.137
0.131
0.127
0.124
0.120
0.112
0.111

0.386
0.384
0.381
0.389
0.388
0.387
0.385
0.389
0.391
0.390
0.389
0.389
0.389
0.389
0.389
0.388
0.387
0.385
0.384
0.383
0.382
0.380
0.369
0.368
0.366
0.364
0.363
0.362
0.359
0.359
0.354
0.352
0.348
0.343
0.339
0.336
0.333
0.323

0.486
0.484
0.482
0.488
0.487
0.486
0.485
0.488
0.489
0.489
0.488
0.488
0.488
0.488
0.488
0.487
0.486
0.485
0.484
0.484
0.483
0.481
0.472
0.471
0.470
0.468
0.468
0.467
0.465
0.464
0.461
0.459
0.456
0.453
0.449
0.447
0.445
0.438

"X" +/- 0.040" Resultant Dimensions


for Nominal "Z" Lead Spacing
0.197
0.296
0.394
0.492

0.160

11 0.045
0.032
0.077
0.140
14 0.055
0.032
0.087
0.134
17 0.068
0.032
0.100
0.125
20 0.033
0.032
0.065
0.146
25 0.039
0.032
0.071
0.143
30 0.043
0.032
0.075
0.141
35 0.051
0.032
0.083
0.137
40 0.032
0.032
0.064
0.147
50 0.020
0.032
0.052
0.151
60 0.025
0.032
0.057
0.150
75 0.031
0.032
0.063
0.147
95 0.031
0.032
0.063
0.147
120 0.031
0.032
0.063
0.147
130 0.031
0.032
0.063
0.147
140 0.033
0.032
0.065
0.146
150 0.036
0.032
0.068
0.145
180 0.042
0.032
0.074
0.142
210 0.050
0.032
0.082
0.137
230 0.054
0.032
0.086
0.135
250 0.059
0.032
0.091
0.132
270 0.063
0.032
0.095
0.129
300 0.071
0.032
0.103
0.122
320 0.075
0.032
0.016
0.139
330 0.078
0.032
0.016
0.142
350 0.083
0.032
0.016
0.147
360 0.087
0.032
0.016
0.151
370 0.089
0.032
0.016
0.153
390 0.092
0.032
0.016
0.156
400 0.098
0.032
0.016
0.162
420 0.099
0.032
0.016
0.163
460 0.109
0.032
0.016
0.173
480 0.113
0.032
0.016
0.177
510 0.120
0.032
0.016
0.184
550 0.129
0.032
0.016
0.193
580 0.137
0.032
0.016
0.201
600 0.142
0.032
0.016
0.206
620 0.146
0.032
0.016
0.210
680 0.161
0.032
0.016
0.225
*
Lead stepped away from disk at lead egress.
** Lead displacement including disk thickness, wire diameter,
*** Includes disk, wire, coating, and lead offset (if indicated).

VOLTS
AC

0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597

0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597

No Code
7
H MAX. H MAX.
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672

10
H MAX.
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672

0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597

0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597

0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672
0.672

0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597

0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597

HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES


11
20
21
23
44
58
93
H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.

10mm Zinc Oxide Varistor Dimensions


94
H MAX.
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597
0.597

D3
H MAX.

D7
H MAX.

0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472
0.472

D
MAX.

0.161
0.165
0.170
0.176
0.182
0.190
0.199
0.211
0.174
0.243
0.184
0.191
0.201
0.204
0.208
0.212
0.223
0.220
0.229
0.236
0.245
0.255
0.264
0.275
0.283
0.272
0.287
0.275
0.298
0.313
0.313
0.329
0.347
0.362
0.373
0.385
0.398
0.411

***T
MAX.

STANDARD SERIES

MECHANICAL DIMENSIONS

DISK
THICK
NOM.

d
LEAD
DIA.

*LEAD
OFFSET
(each lead)

**Y +/0.030"

0.286
0.283
0.279
0.289
0.287
0.285
0.283
0.289
0.291
0.290
0.289
0.289
0.289
0.289
0.288
0.287

NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.

and lead offset.

0.181
0.177
0.170
0.186
0.184
0.180
0.176
0.186
0.189
0.188
0.186
0.187
0.187
0.186
0.185
0.183

0.386
0.384
0.381
0.389
0.388
0.386
0.384
0.389
0.390
0.390
0.389
0.389
0.389
0.389
0.388
0.387

0.486
0.484
0.482
0.488
0.487
0.486
0.484
0.488
0.489
0.488
0.488
0.488
0.488
0.488
0.487
0.487

0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656

0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656

No Code
7
H MAX. H MAX.
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731

10
H MAX.
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731

0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656

0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656

0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731
0.731

0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656

0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656

HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES


11
20
21
23
44
58
93
H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.

11mm Zinc Oxide Varistor Dimensions


"X" +/- 0.040" Resultant Dimension
for Nominal "Z" Lead Spacing
0.160
0.197
0.296
0.394
0.492

11 0.045
0.032
0.077
0.140
14 0.055
0.032
0.087
0.134
17 0.068
0.032
0.100
0.125
20 0.033
0.032
0.065
0.146
25 0.039
0.032
0.071
0.143
30 0.047
0.032
0.079
0.139
35 0.056
0.032
0.088
0.134
40 0.032
0.032
0.064
0.147
50 0.022
0.032
0.054
0.151
60 0.027
0.032
0.059
0.149
75 0.032
0.032
0.064
0.147
95 0.031
0.032
0.063
0.147
120 0.031
0.032
0.063
0.147
130 0.033
0.032
0.065
0.146
140 0.036
0.032
0.068
0.145
150 0.040
0.032
0.072
0.143
*
Lead stepped away from disk at lead egress.
** Lead displacement including disk thickness, wire diameter,
*** Includes disk, wire, coating, and lead offset (if indicated).

VOLTS
AC

94
H MAX.

0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656

D3
H MAX.

D7
H MAX.

0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.531

D
MAX.
0.531

0.161
0.165
0.170
0.176
0.182
0.190
0.199
0.211
0.174
0.243
0.184
0.191
0.201
0.204
0.208
0.212

***T
MAX.

STANDARD SERIES
MECHANICAL DIMENSIONS

25

26

DISK
THICK
NOM.

d
LEAD
DIA.

*LEAD
OFFSET
(each lead)

**Y +/0.030"

0.286
0.283
0.279
0.289
0.287
0.285
0.283
0.289
0.291
0.290
0.289
0.289
0.289
0.289
0.288
0.287
0.285
0.283
0.281
0.279
0.278
0.274
0.256
0.255
0.252
0.248
0.247
0.244
0.240
0.239
0.230
0.227
0.220
0.210
0.201
0.196
0.189
0.169

NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.

and lead offset.

0.181
0.177
0.170
0.186
0.184
0.180
0.176
0.186
0.189
0.188
0.186
0.187
0.187
0.186
0.185
0.183
0.180
0.177
0.174
0.171
0.168
0.163
0.130
0.127
0.120
0.114
0.111
0.104

0.386
0.384
0.381
0.389
0.388
0.386
0.384
0.389
0.390
0.390
0.389
0.389
0.389
0.388
0.388
0.387
0.386
0.384
0.383
0.382
0.380
0.378
0.365
0.364
0.362
0.360
0.359
0.357
0.354
0.353
0.347
0.345
0.341
0.334
0.329
0.326
0.321
0.310

0.486
0.484
0.482
0.488
0.487
0.486
0.484
0.488
0.489
0.488
0.488
0.488
0.488
0.488
0.487
0.487
0.486
0.484
0.483
0.482
0.481
0.479
0.469
0.468
0.467
0.465
0.464
0.463
0.461
0.460
0.455
0.454
0.450
0.445
0.442
0.439
0.436
0.428

0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715

0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715

No Code
7
H MAX. H MAX.
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790

10
H MAX.
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790

0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715

0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715

0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790
0.790

0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715

0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715

HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES


11
20
21
23
44
58
93
H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.

12mm Zinc Oxide Varistor Dimensions


"X" +/- 0.040" Resultant Dimension
for Nominal "Z" Lead Spacing
0.160
0.197
0.296
0.394
0.492

11 0.045
0.032
0.077
0.140
14 0.055
0.032
0.087
0.134
17 0.068
0.032
0.100
0.125
20 0.033
0.032
0.065
0.146
25 0.039
0.032
0.071
0.143
30 0.047
0.032
0.079
0.139
35 0.056
0.032
0.088
0.134
40 0.032
0.032
0.064
0.147
50 0.022
0.032
0.054
0.151
60 0.027
0.032
0.059
0.149
75 0.033
0.032
0.065
0.146
95 0.031
0.032
0.063
0.147
120 0.031
0.032
0.063
0.147
130 0.034
0.032
0.066
0.146
140 0.037
0.032
0.069
0.144
150 0.040
0.032
0.072
0.143
180 0.047
0.032
0.079
0.139
210 0.055
0.032
0.087
0.134
230 0.061
0.032
0.093
0.130
250 0.066
0.032
0.098
0.126
270 0.071
0.032
0.103
0.122
300 0.079
0.032
0.111
0.115
320 0.084
0.032
0.016
0.148
330 0.087
0.032
0.016
0.151
350 0.092
0.032
0.016
0.156
360 0.097
0.032
0.016
0.161
370 0.099
0.032
0.016
0.163
390 0.103
0.032
0.016
0.167
400 0.109
0.032
0.016
0.173
420 0.111
0.032
0.016
0.175
460 0.122
0.032
0.016
0.186
480 0.126
0.032
0.016
0.190
510 0.134
0.032
0.016
0.198
550 0.145
0.032
0.016
0.209
580 0.153
0.032
0.016
0.217
600 0.158
0.032
0.016
0.222
620 0.164
0.032
0.016
0.228
680 0.179
0.032
0.016
0.243
*
Lead stepped away from disk at lead egress.
** Lead displacement including disk thickness, wire diameter,
*** Includes disk, wire, coating, and lead offset (if indicated).

VOLTS
AC
94
H MAX.
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715
0.715

D3
H MAX.

D7
H MAX.

0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590
0.590

D
MAX.
H MAX.

0.161
0.165
0.170
0.176
0.182
0.190
0.199
0.211
0.174
0.243
0.184
0.191
0.201
0.204
0.208
0.212
0.223
0.220
0.229
0.236
0.245
0.255
0.264
0.275
0.283
0.272
0.287
0.275
0.298
0.313
0.313
0.329
0.347
0.362
0.373
0.385
0.398
0.411

***T
MAX.

STANDARD SERIES

MECHANICAL DIMENSIONS

DISK
THICK
NOM.

d
LEAD
DIA.

*LEAD
OFFSET
(each lead)

**Y +/0.030"

0.288
0.285
0.281
0.290
0.289
0.287
0.285
0.290
0.292
0.291
0.290
0.291
0.291
0.290
0.289
0.288
0.287
0.284
0.283
0.281
0.279
0.276
0.259
0.257
0.253
0.250
0.250
0.247
0.242
0.241
0.233
0.229
0.222
0.212
0.203
0.197
0.191
0.169
0.130

NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.

and lead offset.

0.184
0.180
0.174
0.188
0.186
0.183
0.180
0.188
0.191
0.190
0.188
0.189
0.189
0.188
0.187
0.185
0.183
0.179
0.176
0.174
0.171
0.165
0.134
0.131
0.124
0.118
0.116
0.111
0.100

0.388
0.386
0.383
0.390
0.389
0.387
0.386
0.390
0.391
0.390
0.390
0.390
0.390
0.389
0.389
0.388
0.387
0.385
0.384
0.383
0.382
0.379
0.367
0.366
0.363
0.361
0.360
0.359
0.355
0.354
0.349
0.347
0.342
0.335
0.330
0.326
0.323
0.310
0.291
0.259
0.214

0.487
0.485
0.483
0.489
0.488
0.487
0.485
0.488
0.490
0.489
0.489
0.489
0.489
0.488
0.488
0.487
0.486
0.485
0.484
0.483
0.482
0.480
0.470
0.470
0.468
0.466
0.466
0.464
0.462
0.461
0.457
0.455
0.451
0.446
0.443
0.440
0.437
0.428
0.414
0.392
0.364
0.269

"X" +/- 0.040" Resultant Dimension


for Nominal "Z" Lead Spacing
0.197
0.296
0.394
0.492

0.160

11 0.045
0.025
0.070
0.144
14 0.055
0.025
0.080
0.139
17 0.068
0.025
0.093
0.130
20 0.033
0.025
0.058
0.149
25 0.039
0.025
0.064
0.147
30 0.047
0.025
0.072
0.143
35 0.056
0.025
0.081
0.138
40 0.034
0.025
0.059
0.149
50 0.023
0.025
0.048
0.153
60 0.028
0.025
0.053
0.151
75 0.033
0.025
0.058
0.149
95 0.031
0.025
0.056
0.150
120 0.031
0.025
0.056
0.150
130 0.035
0.025
0.060
0.148
140 0.038
0.025
0.063
0.147
150 0.042
0.025
0.067
0.145
180 0.049
0.025
0.074
0.142
210 0.057
0.025
0.082
0.137
230 0.063
0.025
0.088
0.134
250 0.068
0.025
0.093
0.130
270 0.073
0.025
0.098
0.126
300 0.082
0.025
0.107
0.119
320 0.087
0.025
0.016
0.144
330 0.090
0.025
0.016
0.147
350 0.096
0.025
0.016
0.153
360 0.101
0.025
0.016
0.158
370 0.102
0.025
0.016
0.159
390 0.106
0.025
0.016
0.163
400 0.113
0.025
0.016
0.170
420 0.115
0.025
0.016
0.172
460 0.126
0.025
0.016
0.183
480 0.130
0.025
0.016
0.187
510 0.139
0.025
0.016
0.196
550 0.150
0.025
0.016
0.207
580 0.158
0.025
0.016
0.215
600 0.164
0.025
0.016
0.221
620 0.169
0.025
0.016
0.226
680 0.186
0.025
0.016
0.243
750 0.209
0.025
0.016
0.266
880 0.240
0.025
0.016
0.297
1000 0.274
0.025
0.016
0.331
1200 0.355
0.025
0.016
0.412
*
Lead stepped away from disk at lead egress.
** Lead displacement including disk thickness, wire diameter,
*** Includes disk, wire, coating, and lead offset (if indicated).

VOLTS
AC

0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775

0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775

No Code
7
H MAX. H MAX.
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850

10
H MAX.
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850

0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775

0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775

0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850
0.850

0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775

0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775

0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775

HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES


11
20
21
23
44
58
93
H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.

14mm Zinc Oxide Varistor Dimensions

0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775

94
H MAX.
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775

D3
H MAX.
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775
0.775

D7
H MAX.

0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650
0.650

D
MAX.

0.161
0.165
0.170
0.176
0.182
0.190
0.199
0.211
0.174
0.243
0.184
0.191
0.201
0.204
0.208
0.212
0.223
0.220
0.229
0.236
0.245
0.255
0.264
0.275
0.283
0.272
0.287
0.275
0.298
0.313
0.313
0.329
0.347
0.362
0.373
0.385
0.398
0.411
0.437
0.476
0.531
0.550

***T
MAX.

STANDARD SERIES
MECHANICAL DIMENSIONS

27

28

DISK
THICK
NOM.

d
LEAD
DIA.

*LEAD
OFFSET
(each lead)

**Y +/0.030"

0.286
0.283
0.279
0.289
0.287
0.285
0.283
0.289
0.291
0.290
0.289
0.289
0.289
0.288
0.287
0.287
0.284
0.282
0.280
0.278
0.276
0.273
0.254
0.252
0.248
0.244
0.244
0.241
0.236
0.234
0.225
0.221
0.213
0.202
0.192
0.185
0.179
0.154
0.107

NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.

and lead offset.

0.181
0.177
0.170
0.186
0.184
0.180
0.176
0.186
0.189
0.188
0.186
0.187
0.187
0.185
0.184
0.183
0.179
0.175
0.172
0.169
0.166
0.160
0.125
0.120
0.114
0.104
0.103

0.386
0.384
0.381
0.389
0.388
0.386
0.384
0.388
0.390
0.389
0.388
0.389
0.389
0.388
0.388
0.387
0.385
0.384
0.382
0.381
0.379
0.377
0.363
0.362
0.360
0.357
0.356
0.354
0.351
0.350
0.344
0.341
0.336
0.330
0.323
0.319
0.315
0.302
0.281
0.246
0.194

0.486
0.484
0.482
0.488
0.487
0.486
0.484
0.488
0.489
0.488
0.488
0.488
0.488
0.487
0.487
0.486
0.485
0.484
0.483
0.482
0.480
0.478
0.468
0.467
0.465
0.463
0.462
0.461
0.458
0.457
0.453
0.451
0.447
0.442
0.438
0.434
0.432
0.422
0.407
0.384
0.353
0.248

"X" +/- 0.040" Resultant Dimension


for Nominal "Z" Lead Spacing
0.160
0.197
0.296
0.394
0.492

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

No Code
7
H MAX. H MAX.
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012

10
H MAX.
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES


11
20
21
23
44
58
93
H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.

18mm Zinc Oxide Varistor Dimensions (20 AWG Wire Only)

11 0.045
0.032
0.077
0.140
14 0.055
0.032
0.087
0.134
17 0.068
0.032
0.100
0.125
20 0.033
0.032
0.065
0.146
25 0.039
0.032
0.071
0.143
30 0.047
0.032
0.079
0.139
35 0.056
0.032
0.088
0.134
40 0.034
0.032
0.066
0.146
50 0.023
0.032
0.055
0.150
60 0.028
0.032
0.060
0.148
75 0.034
0.032
0.066
0.146
95 0.031
0.032
0.063
0.147
120 0.031
0.032
0.063
0.147
130 0.035
0.032
0.067
0.145
140 0.039
0.032
0.071
0.143
150 0.042
0.032
0.074
0.142
180 0.050
0.032
0.082
0.137
210 0.058
0.032
0.090
0.132
230 0.064
0.032
0.096
0.128
250 0.069
0.032
0.101
0.124
270 0.074
0.032
0.106
0.120
300 0.083
0.032
0.115
0.111
320 0.088
0.032
0.016
0.152
330 0.092
0.032
0.016
0.156
350 0.097
0.032
0.016
0.161
360 0.103
0.032
0.016
0.167
370 0.104
0.032
0.016
0.168
390 0.108
0.032
0.016
0.172
400 0.115
0.032
0.016
0.179
420 0.117
0.032
0.016
0.181
460 0.128
0.032
0.016
0.192
480 0.133
0.032
0.016
0.197
510 0.142
0.032
0.016
0.206
550 0.152
0.032
0.016
0.216
580 0.161
0.032
0.016
0.225
600 0.167
0.032
0.016
0.231
620 0.172
0.032
0.016
0.236
680 0.189
0.032
0.016
0.253
750 0.212
0.032
0.016
0.276
880 0.244
0.032
0.016
0.308
1000 0.279
0.032
0.016
0.343
1200 0.361
0.032
0.016
0.425
*
Lead stepped away from disk at lead egress.
** Lead displacement including disk thickness, wire diameter,
*** Includes disk, wire, coating, and lead offset (if indicated).

VOLTS
AC

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

94
H MAX.
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

D3
H MAX.
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

D7
H MAX.

0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812

D
MAX.

0.161
0.165
0.170
0.176
0.182
0.190
0.199
0.211
0.174
0.243
0.184
0.191
0.201
0.204
0.208
0.212
0.223
0.220
0.229
0.236
0.245
0.255
0.264
0.275
0.283
0.272
0.287
0.275
0.298
0.313
0.313
0.329
0.347
0.362
0.373
0.385
0.398
0.411
0.437
0.476
0.531
0.550

***T
MAX.

STANDARD SERIES

MECHANICAL DIMENSIONS

DISK
THICK
NOM.

d
LEAD
DIA.

*LEAD
OFFSET
(each lead)

**Y +/0.030"

0.284
0.280
0.276
0.287
0.285
0.283
0.280
0.287
0.289
0.288
0.287
0.287
0.287
0.286
0.285
0.284
0.282
0.279
0.277
0.275
0.273
0.269
0.249
0.246
0.243
0.239
0.238
0.235
0.229
0.228
0.218
0.214
0.204
0.193
0.183
0.175
0.168
0.140

NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.

and lead offset.

0.178
0.173
0.165
0.183
0.180
0.177
0.172
0.183
0.187
0.185
0.183
0.184
0.184
0.182
0.180
0.179
0.175
0.171
0.167
0.164
0.161
0.154
0.115
0.109
0.101

0.385
0.382
0.379
0.387
0.386
0.384
0.382
0.387
0.389
0.388
0.387
0.388
0.388
0.387
0.386
0.385
0.384
0.382
0.380
0.379
0.377
0.374
0.360
0.358
0.356
0.353
0.353
0.350
0.347
0.346
0.339
0.336
0.331
0.324
0.318
0.313
0.309
0.295
0.273
0.235
0.179

0.485
0.483
0.480
0.487
0.486
0.484
0.483
0.486
0.488
0.487
0.486
0.487
0.487
0.486
0.486
0.485
0.484
0.482
0.481
0.480
0.479
0.476
0.465
0.464
0.462
0.460
0.459
0.458
0.455
0.454
0.450
0.447
0.443
0.438
0.433
0.430
0.427
0.417
0.402
0.377
0.345
0.234

"X" +/- 0.040" Resultant Dimension


for Nominal "Z" Lead Spacing
0.197
0.296
0.394
0.492

0.160

11 0.045
0.040
0.085
0.136
14 0.055
0.040
0.095
0.129
17 0.068
0.040
0.108
0.118
20 0.033
0.040
0.073
0.142
25 0.039
0.040
0.079
0.139
30 0.047
0.040
0.087
0.134
35 0.056
0.040
0.096
0.128
40 0.034
0.040
0.074
0.142
50 0.023
0.040
0.063
0.147
60 0.028
0.040
0.068
0.145
75 0.034
0.040
0.074
0.142
95 0.031
0.040
0.071
0.143
120 0.031
0.040
0.071
0.143
130 0.035
0.040
0.075
0.141
140 0.039
0.040
0.079
0.139
150 0.042
0.040
0.082
0.137
180 0.050
0.040
0.090
0.132
210 0.058
0.040
0.098
0.126
230 0.064
0.040
0.104
0.122
250 0.069
0.040
0.109
0.117
270 0.074
0.040
0.114
0.112
300 0.083
0.040
0.123
0.102
320 0.088
0.040
0.016
0.160
330 0.092
0.040
0.016
0.164
350 0.097
0.040
0.016
0.169
360 0.103
0.040
0.016
0.175
370 0.104
0.040
0.016
0.176
390 0.108
0.040
0.016
0.180
400 0.115
0.040
0.016
0.187
420 0.117
0.040
0.016
0.189
460 0.128
0.040
0.016
0.200
480 0.133
0.040
0.016
0.205
510 0.142
0.040
0.016
0.214
550 0.152
0.040
0.016
0.224
580 0.161
0.040
0.016
0.233
600 0.167
0.040
0.016
0.239
620 0.172
0.040
0.016
0.244
680 0.189
0.040
0.016
0.261
750 0.212
0.040
0.016
0.284
880 0.244
0.040
0.016
0.316
1000 0.279
0.040
0.016
0.351
1200 0.361
0.040
0.016
0.433
*
Lead stepped away from disk at lead egress.
** Lead displacement including disk thickness, wire diameter,
*** Includes disk, wire, coating, and lead offset (if indicated).

VOLTS
AC

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

No Code
7
H MAX. H MAX.
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012

10
H MAX.
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES


11
20
21
23
44
58
93
H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.

18mm Zinc Oxide Varistor Dimensions (18 AWG Wire Only)

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

94
H MAX.
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

D3
H MAX.
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

D7
H MAX.

0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812

D
MAX.

0.161
0.165
0.170
0.176
0.182
0.190
0.199
0.211
0.174
0.243
0.184
0.191
0.201
0.204
0.208
0.212
0.223
0.220
0.229
0.236
0.245
0.255
0.264
0.275
0.283
0.272
0.287
0.275
0.298
0.313
0.313
0.329
0.347
0.362
0.373
0.385
0.398
0.411
0.437
0.476
0.531
0.550

***T
MAX.

STANDARD SERIES
MECHANICAL DIMENSIONS

29

30

DISK
THICK
NOM.

d
LEAD
DIA.

*LEAD
OFFSET
(each lead)

**Y +/0.030"

0.286
0.283
0.279
0.289
0.287
0.285
0.283
0.289
0.291
0.290
0.289
0.289
0.289
0.288
0.287
0.287
0.284
0.282
0.280
0.278
0.276
0.273
0.254
0.252
0.248
0.244
0.244
0.241
0.236
0.234
0.225
0.221
0.213
0.202
0.192
0.185
0.179
0.154
0.107

NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.

and lead offset.

0.181
0.177
0.170
0.186
0.184
0.180
0.176
0.186
0.189
0.188
0.186
0.187
0.187
0.185
0.184
0.183
0.179
0.175
0.172
0.169
0.166
0.160
0.125
0.120
0.114
0.104
0.103

0.386
0.384
0.381
0.389
0.388
0.386
0.384
0.388
0.390
0.389
0.388
0.389
0.389
0.388
0.388
0.387
0.385
0.384
0.382
0.381
0.379
0.377
0.363
0.362
0.360
0.357
0.356
0.354
0.351
0.350
0.344
0.341
0.336
0.330
0.323
0.319
0.315
0.302
0.281
0.246
0.194

0.486
0.484
0.482
0.488
0.487
0.486
0.484
0.488
0.489
0.488
0.488
0.488
0.488
0.487
0.487
0.486
0.485
0.484
0.483
0.482
0.480
0.478
0.468
0.467
0.465
0.463
0.462
0.461
0.458
0.457
0.453
0.451
0.447
0.442
0.438
0.434
0.432
0.422
0.407
0.384
0.353
0.248

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

No Code
7
H MAX. H MAX.
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105

10
H MAX.
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES


11
20
21
23
44
58
93
H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.

20mm Zinc Oxide Varistor Dimensions (20 AWG Wire Only)

"X" +/- 0.040" Resultant Dimension


for Nominal "Z" Lead Spacing
0.160
0.197
0.296
0.394
0.492

11 0.045
0.032
0.077
0.140
14 0.055
0.032
0.087
0.134
17 0.068
0.032
0.100
0.125
20 0.033
0.032
0.065
0.146
25 0.039
0.032
0.071
0.143
30 0.047
0.032
0.079
0.139
35 0.056
0.032
0.088
0.134
40 0.034
0.032
0.066
0.146
50 0.023
0.032
0.055
0.150
60 0.028
0.032
0.060
0.148
75 0.034
0.032
0.066
0.146
95 0.031
0.032
0.063
0.147
120 0.031
0.032
0.063
0.147
130 0.035
0.032
0.067
0.145
140 0.039
0.032
0.071
0.143
150 0.042
0.032
0.074
0.142
180 0.050
0.032
0.082
0.137
210 0.058
0.032
0.090
0.132
230 0.064
0.032
0.096
0.128
250 0.069
0.032
0.101
0.124
270 0.074
0.032
0.106
0.120
300 0.083
0.032
0.115
0.111
320 0.088
0.032
0.016
0.152
330 0.092
0.032
0.016
0.156
350 0.097
0.032
0.016
0.161
360 0.103
0.032
0.016
0.167
370 0.104
0.032
0.016
0.168
390 0.108
0.032
0.016
0.172
400 0.115
0.032
0.016
0.179
420 0.117
0.032
0.016
0.181
460 0.128
0.032
0.016
0.192
480 0.133
0.032
0.016
0.197
510 0.142
0.032
0.016
0.206
550 0.152
0.032
0.016
0.216
580 0.161
0.032
0.016
0.225
600 0.167
0.032
0.016
0.231
620 0.172
0.032
0.016
0.236
680 0.189
0.032
0.016
0.253
750 0.212
0.032
0.016
0.276
880 0.244
0.032
0.016
0.308
1000 0.279
0.032
0.016
0.343
1200 0.361
0.032
0.016
0.425
*
Lead stepped away from disk at lead egress.
** Lead displacement including disk thickness, wire diameter,
*** Includes disk, wire, coating, and lead offset (if indicated).

VOLTS
AC

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

94
H MAX.
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

D3
H MAX.
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

D7
H MAX.

0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905

D
MAX.

0.161
0.165
0.170
0.176
0.182
0.190
0.199
0.211
0.174
0.243
0.184
0.191
0.201
0.204
0.208
0.212
0.223
0.220
0.229
0.236
0.245
0.255
0.264
0.275
0.283
0.272
0.287
0.275
0.298
0.313
0.313
0.329
0.347
0.362
0.373
0.385
0.398
0.411
0.437
0.476
0.531
0.550

***T
MAX.

STANDARD SERIES

MECHANICAL DIMENSIONS

DISK
THICK
NOM.

d
LEAD
DIA.

*LEAD
OFFSET
(each lead)

**Y +/0.030"

0.284
0.280
0.276
0.287
0.285
0.283
0.280
0.287
0.289
0.288
0.287
0.287
0.287
0.286
0.285
0.284
0.282
0.279
0.277
0.275
0.273
0.269
0.249
0.246
0.243
0.239
0.238
0.235
0.229
0.228
0.218
0.214
0.204
0.193
0.183
0.175
0.168
0.140

NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.

and lead offset.

0.178
0.173
0.165
0.183
0.180
0.177
0.172
0.183
0.187
0.185
0.183
0.184
0.184
0.182
0.180
0.179
0.175
0.171
0.167
0.164
0.161
0.154
0.115
0.109
0.101

0.385
0.382
0.379
0.387
0.386
0.384
0.382
0.387
0.389
0.388
0.387
0.388
0.388
0.387
0.386
0.385
0.384
0.382
0.380
0.379
0.377
0.374
0.360
0.358
0.356
0.353
0.353
0.350
0.347
0.346
0.339
0.336
0.331
0.324
0.318
0.313
0.309
0.295
0.273
0.235
0.179

0.485
0.483
0.480
0.487
0.486
0.484
0.483
0.486
0.488
0.487
0.486
0.487
0.487
0.486
0.486
0.485
0.484
0.482
0.481
0.480
0.479
0.476
0.465
0.464
0.462
0.460
0.459
0.458
0.455
0.454
0.450
0.447
0.443
0.438
0.433
0.430
0.427
0.417
0.402
0.377
0.345
0.234

"X" +/- 0.040" Resultant Dimension


for Nominal "Z" Lead Spacing
0.160
0.197
0.296
0.394
0.492

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

No Code
7
H MAX. H MAX.
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105

10
H MAX.
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105
1.105

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES


11
20
21
23
44
58
93
H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.

20mm Zinc Oxide Varistor Dimensions (18 AWG Wire Only)

11 0.045
0.040
0.085
0.136
14 0.055
0.040
0.095
0.129
17 0.068
0.040
0.108
0.118
20 0.033
0.040
0.073
0.142
25 0.039
0.040
0.079
0.139
30 0.047
0.040
0.087
0.134
35 0.056
0.040
0.096
0.128
40 0.034
0.040
0.074
0.142
50 0.023
0.040
0.063
0.147
60 0.028
0.040
0.068
0.145
75 0.034
0.040
0.074
0.142
95 0.031
0.040
0.071
0.143
120 0.031
0.040
0.071
0.143
130 0.035
0.040
0.075
0.141
140 0.039
0.040
0.079
0.139
150 0.042
0.040
0.082
0.137
180 0.050
0.040
0.090
0.132
210 0.058
0.040
0.098
0.126
230 0.064
0.040
0.104
0.122
250 0.069
0.040
0.109
0.117
270 0.074
0.040
0.114
0.112
300 0.083
0.040
0.123
0.102
320 0.088
0.040
0.016
0.160
330 0.092
0.040
0.016
0.164
350 0.097
0.040
0.016
0.169
360 0.103
0.040
0.016
0.175
370 0.104
0.040
0.016
0.176
390 0.108
0.040
0.016
0.180
400 0.115
0.040
0.016
0.187
420 0.117
0.040
0.016
0.189
460 0.128
0.040
0.016
0.200
480 0.133
0.040
0.016
0.205
510 0.142
0.040
0.016
0.214
550 0.152
0.040
0.016
0.224
580 0.161
0.040
0.016
0.233
600 0.167
0.040
0.016
0.239
620 0.172
0.040
0.016
0.244
680 0.189
0.040
0.016
0.261
750 0.212
0.040
0.016
0.284
880 0.244
0.040
0.016
0.316
1000 0.279
0.040
0.016
0.351
1200 0.361
0.040
0.016
0.433
*
Lead stepped away from disk at lead egress.
** Lead displacement including disk thickness, wire diameter,
*** Includes disk, wire, coating, and lead offset (if indicated).

VOLTS
AC

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

94
H MAX.
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

D3
H MAX.

1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030
1.030

D7
H MAX.

0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905
0.905

D
MAX.

0.161
0.165
0.170
0.176
0.182
0.190
0.199
0.211
0.174
0.243
0.184
0.191
0.201
0.204
0.208
0.212
0.223
0.220
0.229
0.236
0.245
0.255
0.264
0.275
0.283
0.272
0.287
0.275
0.298
0.313
0.313
0.329
0.347
0.362
0.373
0.385
0.398
0.411
0.437
0.476
0.531
0.550

***T
MAX.

STANDARD SERIES
MECHANICAL DIMENSIONS

31

32

DISK
THICK
NOM.

d
LEAD
DIA.

*LEAD
OFFSET
(each lead)

**Y +/0.030"

0.293
0.293
0.293
0.293
0.293
0.293
0.293
0.287
0.289
0.288
0.287
0.287
0.287
0.286
0.285
0.284
0.282
0.279
0.277
0.275
0.273
0.269
0.252
0.246
0.243
0.239
0.238
0.235
0.229
0.228
0.218
0.214
0.204
0.193
0.183
0.175
0.168
0.140

NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.

and lead offset.

0.193
0.193
0.193
0.193
0.193
0.193
0.193
0.183
0.187
0.185
0.183
0.184
0.184
0.182
0.180
0.179
0.175
0.171
0.167
0.164
0.161
0.154
0.122
0.109
0.101

0.392
0.392
0.392
0.392
0.392
0.392
0.392
0.387
0.389
0.388
0.387
0.388
0.388
0.387
0.386
0.385
0.384
0.382
0.380
0.379
0.377
0.374
0.362
0.358
0.356
0.353
0.353
0.350
0.347
0.346
0.339
0.336
0.331
0.324
0.318
0.313
0.309
0.295
0.273
0.235
0.179

0.490
0.490
0.490
0.490
0.490
0.490
0.490
0.486
0.488
0.487
0.486
0.487
0.487
0.486
0.486
0.485
0.484
0.482
0.481
0.480
0.479
0.476
0.467
0.464
0.462
0.460
0.459
0.458
0.455
0.454
0.450
0.447
0.443
0.438
0.433
0.430
0.427
0.417
0.402
0.377
0.345
0.234

"X" +/- 0.040" Resultant Dimension


for Nominal "Z" Lead Spacing
0.197
0.296
0.394
0.492

0.160

11
0.040
0.040
0.155
14
0.040
0.040
0.155
17
0.040
0.040
0.155
20
0.040
0.040
0.155
25
0.040
0.040
0.155
30
0.040
0.040
0.155
35
0.040
0.040
0.155
40 0.034
0.040
0.074
0.142
50 0.023
0.040
0.063
0.147
60 0.028
0.040
0.068
0.145
75 0.034
0.040
0.074
0.142
95 0.031
0.040
0.071
0.143
120 0.031
0.040
0.071
0.143
130 0.035
0.040
0.075
0.141
140 0.039
0.040
0.079
0.139
150 0.042
0.040
0.082
0.137
180 0.050
0.040
0.090
0.132
210 0.058
0.040
0.098
0.126
230 0.064
0.040
0.104
0.122
250 0.069
0.040
0.109
0.117
270 0.074
0.040
0.114
0.112
300 0.083
0.040
0.123
0.102
320 0.083
0.040
0.016
0.155
330 0.092
0.040
0.016
0.164
350 0.097
0.040
0.016
0.169
360 0.103
0.040
0.016
0.175
370 0.104
0.040
0.016
0.176
390 0.108
0.040
0.016
0.180
400 0.115
0.040
0.016
0.187
420 0.117
0.040
0.016
0.189
460 0.128
0.040
0.016
0.200
480 0.133
0.040
0.016
0.205
510 0.142
0.040
0.016
0.214
550 0.152
0.040
0.016
0.224
580 0.161
0.040
0.016
0.233
600 0.167
0.040
0.016
0.239
620 0.172
0.040
0.016
0.244
680 0.189
0.040
0.016
0.261
750 0.212
0.040
0.016
0.284
880 0.244
0.040
0.016
0.316
1000 0.279
0.040
0.016
0.351
1200 0.361
0.040
0.016
0.433
*
Lead stepped away from disk at lead egress.
** Lead displacement including disk thickness, wire diameter,
*** Includes disk, wire, coating, and lead offset (if indicated).

VOLTS
AC

1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225

1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225

No Code
7
H MAX. H MAX.
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300

10
H MAX.
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300

1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300

1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300
1.300

1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225

1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225

HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES


11
20
21
23
44
58
93
H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.

25mm Zinc Oxide Varistor Dimensions

1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225

94
H MAX.

D3
H MAX.
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225
1.225

D7
H MAX.

1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100

D
MAX.

0.161
0.165
0.170
0.176
0.182
0.190
0.199
0.211
0.174
0.243
0.184
0.191
0.201
0.204
0.208
0.212
0.223
0.220
0.229
0.236
0.245
0.255
0.264
0.275
0.283
0.272
0.287
0.275
0.298
0.313
0.313
0.329
0.347
0.362
0.373
0.385
0.398
0.411
0.437
0.476
0.531
0.550

***T
MAX.

STANDARD SERIES

MECHANICAL DIMENSIONS

También podría gustarte