Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Size 36-44
Materials:
Cutting out:
1.51.7 m fabric (145 cm wide), e.g. linen Open-ended zip, 40 cm long BERNINA activa Edgestitch foot no.10 Pattern
4 x centre-front section 2 x side-front section 2 x pocket pouch 4 x pocket flap 2 x collar to fabric fold 1 x back yoke to fabric fold 2 x front yoke 1 x centre-back section to fabric fold 2 x side back section 2 x sleeve with 8-10 cm hem allowance For the pocket tabs, a strip approx. 15 x 2 cm, finished width 1 cm. Belt: Hip measurement plus 40 50 cm x 10 cm, finished width 5 cm. Belt loop: 1 strip approx. 30 cm long, 4 cm wide, finished width 2 cm, to yield 4 loops.
Instructions
1. Sew centre-front section to side-front section. Sew on front yoke. Press seam allowances towards center and topstitch. Hem top edge of pockets and iron over seam allowances. With right sides facing, stitch together pocket flaps; turn and topstitch. Sew tab. Position pocket flap with seam line approx. 1 cm above pocket, and mark where the tab is to be sewn on. Sew on tab. Stitch on pockets. Sew on flaps just under 1 cm above the pockets. 2. Sew side-back sections to centre-back section and topstitch. Sew on back yoke and topstitch. Sew shoulder seams and side seams. 3. Sew zip to the front edges. With right sides together, stitch together front edge and hem edge with facing and turn. Iron facings inwards. Hem jacket. 4. Sew sleeve seam and hem sleeve. Insert sleeve. Press sleeve cuff upwards and doubletopstitch. 5. With right sides facing, stitch together two collar sections at a time along the outside edges and turn. Sew one collar section right sides facing to the neckline. Turn under free edge, pin, and stitch in the ditch from the right side. 6. Topstitch facings. Sew belt and belt loops. Sew loops onto the marked spots.