0 calificaciones0% encontró este documento útil (0 votos)
27 vistas2 páginas
This technical guide document provides information about the inverse time characteristic curve for the negative phase sequence protection element I2>> in MiCOM P225 relays. The I2>> setting range is from 0.04 to 0.8 times the rated current In. The inverse time characteristic curve shows the operating time in seconds decreasing from 2 seconds down to 0.1 seconds as the ratio of negative phase sequence current to rated current increases from 0.01 to 10.
This technical guide document provides information about the inverse time characteristic curve for the negative phase sequence protection element I2>> in MiCOM P225 relays. The I2>> setting range is from 0.04 to 0.8 times the rated current In. The inverse time characteristic curve shows the operating time in seconds decreasing from 2 seconds down to 0.1 seconds as the ratio of negative phase sequence current to rated current increases from 0.01 to 10.
Copyright:
Attribution Non-Commercial (BY-NC)
Formatos disponibles
Descargue como PDF, TXT o lea en línea desde Scribd
This technical guide document provides information about the inverse time characteristic curve for the negative phase sequence protection element I2>> in MiCOM P225 relays. The I2>> setting range is from 0.04 to 0.8 times the rated current In. The inverse time characteristic curve shows the operating time in seconds decreasing from 2 seconds down to 0.1 seconds as the ratio of negative phase sequence current to rated current increases from 0.01 to 10.
Copyright:
Attribution Non-Commercial (BY-NC)
Formatos disponibles
Descargue como PDF, TXT o lea en línea desde Scribd