Documentos de Académico
Documentos de Profesional
Documentos de Cultura
ISSN 1038-4219 Published by SAI Global Ltd GPO Box 5420, Sydney NSW 2001 Phone: (02) 8206 6000 Fax: Email: Web: (02) 8206 6001 mail@saiglobal.com http://infostore.saiglobal.com
Keeping up-to-date
Our website Catalogue is updated daily, and, as well as Australian Standards, it includes all ISO, IEC, BSI, ASTM, IS EN and ETSI Standards, plus Standards and publications from many other publishers. We provide a range of powerful search tools, including a What's New search for finding recently published Australian Standards . http://infostore.saiglobal.com
Contents
About this Catalogue Online Catalogue Copyright Service About SAI Global Business Publishing About Standards Australia Glossary of Terms Abbreviations Example of Catalogue Entry Where to Buy Standards Internet and Electronic Services International Standards Online Australian Standards in Numerical Order Standards Miscellaneous Set & CD Products Classified Standards Reference Materials Handbooks Miscellaneous Publications Rulings Technical Reports Other National Standards & Similar Publications Subject Index
iv iv iv iv iv iv vi vii viii ix ix 1 259 259 261 261 274 275 277 277 281
iii
Australian-owned organization with extensive national and international businesses that provides a range of professional services focusing on standards, education, assurance and compliance.
Online Catalogue
The online catalogue of Australian Standards , containing extensive additional data including current price information, can be found at
http://infostore.saiglobal.com
and is updated daily. It also includes current Draft Standards, as well as many other International Standards databases, including ISO, IEC, BSI, ANSI, ASTM, IS EN and DIN, plus Standards and publications from many other publishers. It features powerful search tools which allows users to make complex searches.
Glossary of Terms
Amendments and Revisions This Catalogue covers all publications available as of 1 January 2009. It should be noted that the subsequent revision of any Standard, whether by new edition or amendment, supersedes the previous edition or part of the Standard so revised or reprinted. Published amendments are usually incorporated when a Standard is revised. Further information on revision or amendment of Standards or availability of new Standards may be obtained from our website at http://infostore.saiglobal.com Responsible Technical Committee A reference to the technical committee responsible for the preparation of each Standard is shown in parentheses following the entry, e.g. (EL-002). Available Superseded Standards An available superseded Standard is one which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation or regulations or in other Standards, and its use should be restricted to where so referenced. Obsolescent Standards Obsolescent indicates that the Standard is not recommended for new equipment or as a current practice, but is retained in order to provide for servicing of existing equipment or requirements. Interim Standards Interim Standards are temporary or provisional Standards.
Copyright Service
Copyright exists on all Standards Australia and SAI Global publications and other products. SAI Global is exclusively authorised by Standards Australia to permit third parties to reproduce Standards Australias copyright material and generally no material may be reproduced without permission from SAI Global. SAI Globals Copyright Service accepts inquiries for the reproduction of published standards material, whole or partial, print or electronic format. SAI Global will always consider granting permission for the reproduction of Standards Australias copyright material, including publications for resale. However, written approval must be obtained in advance. For more information about our Copyright Licensing Services and royalty rates, please submit your request online or in writing. Visit http://www.saiglobal.com/publishing/databases/copyright/ or write to Copyright Licensing Services, SAI Global, GPO Box 5420, Sydney NSW 2001, indicating your requirements and the manner in which the material is to be used.
iv
Joint Australian/New Zealand Standards Standards Australia and Standards New Zealand produce and publish Joint Standards through joint technical committees. Adoption of an existing Standard from either country can also be made at either revision or reprint stage, at which time it is reproduced as a joint single document. Relationship Between International and Australian Standards Many ISO and IEC Standards have been adopted as Australian Standards . To identify any equivalence between national and international standards, visit http://infostore.saiglobal.com and go to International Equivalents under the Search menu option.
Abbreviations
ACA ACIF AGA Amdt ANSI AS AS/NZS ASCRM ASTM BS CCITT CEN Australian Communications Authority Australian Communications Industry Forum The Australian Gas Association Amendment American National Standards Institute Australian Standard Joint Australian/New Zealand Standard Australian Standard Certified Reference Material American Society for Testing and Materials British Standard International Telegraph and Telephone Consultative Committee European Committee for Standardization
CENELEC European Committee for Electrotechnical Standardization CIDA CISPR DIN ETSI IEC IEEE ISBN IS EN ISO ITU NZS SAA SIRCA SNZ Supp TR WSAA WTIA Construction Industry Development Agency International Special Committee on Radio Interference German Standard European Telecommunications Standards Institute International Electrotechnical Commission The Institute of Electrical and Electronics Engineers International Standard Book Number Irish Standard European Norms International Organization for Standardization International Telecommunications Union New Zealand Standard Standards Australia Securities Industry Research Centre of AsiaPacific Standards New Zealand Supplement Technical Report Water Services Association of Australia Welding Technology Institute of Australia
vi
Standard prefix and number Generic title Part number Part title Relationship to International Standard Amendments
AS/NZS 3350 Safety of household and similar electrical appliances AS/NZS 3350.1:1994 General requirements IEC 335-1:1991 Amdt 1 March 1995 117pp
Number of pages
Synopsis
Specifies general safety requirements for household and similar electrical appliances. It is a base Standard which, when combined with a particular Standard in the AS/NZS 3350 series, becomes a complete Standard for the particular appliance. This Standard is technically equivalent to, and has been Committee number reproduced from, IEC 335-1:1991. (EL-002)
vii
viii
ix
ratus with limits and methods of measurement with regard to their immunity characteristics to interfering signals. (TE-003)
AS/NZS CISPR 15:2006 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (CISPR 15 Ed. 7.0 (Bilingual 2005)) 40pp
Specifies the limits and methods of test for the measurement of radio disturbance characteristics of electrical lighting and similar equipment. (TE-003)
AS/NZS CISPR 16.2.2:2006 Methods of measurement of disturbances and immunityMeasurement of disturbance power (CISPR 16-2-2 Ed. 1.2 (Bilingual 2005)) 39pp
Provides the methods of measurement of disturbance power using the absorbing clamp in the frequency range 30 MHz to 1 000 MHz. (TE-003)
AS/NZS CISPR 16 Specification for radio disturbance and immunity measuring apparatus and methods AS/NZS CISPR 16.1.1:2006 Radio disturbance and immunity measuring apparatusMeasuring apparatus (CISPR 16-1-1 Ed. 2.0 (English 2006)) 65pp
Specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages, currents and fields in the frequency range 9 kHz to 18 GHz. (TE-003)
AS/NZS CISPR 16.2.3:2004 Methods of measurement of disturbances and immunityRadiated disturbance measurements (CISPR 16-2-3 Ed. 1.0 (Bilingual 2003)) 58pp
Adopts CISPR 16-2-3 which specifies the methods of measurement of radiated disturbance phenomena in the frequency range 9 kHz to 18 GHz. (TE-003)
AS/NZS CISPR 11:2004 (2nd Edition) Industrial scientific and medical (ISM) radiofrequency equipmentElectromagnetic disturbance characteristicsLimits and methods of measurement (CISPR 11 Ed. 4.1 (English 2004)) 35pp
Adopts IEC CISPR 11 which identifies limits and methods of measurement of electromagnetic disturbance characteristics in ISM radio frequency equipment. (TE-003)
AS/NZS CISPR 16.2.4:2004 Methods of measurement of disturbances and immunityImmunity measurements (CISPR 16-2-4 Ed. 1.0 (Bilingual 2003)) 18pp
Adopts CISPR 16-2-4 which specifies the methods of measurement of immunity to EMC phenomena in the frequency range 9 kHz to 18 GHz. (TE-003)
AS/NZS CISPR 12:2006 Vehicles, boats, and internal combustion engine driven devicesRadio disturbance characteristicsLimits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices (CISPR 12 Ed. 5.1 (Bilingual 2005)) 48pp
Adopts CISPR 12:2005, which provides limits of protection for broadcast receivers in the frequency range of 30 MHz to 1 000 MHz when used in the residential environment. This Standard applies to the emission of broadband and narrowband electromagnetic energy which may cause interference to radio reception and which is emitted from vehicles or boats propelled by an internal combustion engine, electrical means or both, and devices equipped with an internal combustion engine. Aircraft and traction systems are beyond the scope of this Standard, nor does it specify the measurement of electromagnetic disturbances while the vehicle is connected to power mains for charging. (TE-003)
AS/NZS CISPR 16.1.2:2004 (2nd Edition) Radio disturbance and immunity measuring apparatusAncillary equipment Conducted disturbances (CISPR 16-1-2 Ed. 1.1 (English 2004)) 66pp
Adopts CISPR 16-1-2:2004, Ed 1.1 which specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages and currents in the frequency range 9 kHz to 1 GHz. (TE-003)
AS/NZS CISPR 16.3:2004 CISPR technical reports (CISPR/TR 16-3 Ed. 2.0 (English 2003)) 186pp
Adopts CISPR 16-3 which specifies technical reports and information on the history of CISPR. (TE-003)
AS/NZS CISPR 16.1.3:2004 (2nd Edition) Radio disturbance and immunity measuring apparatusAncillary equipment Disturbance power (CISPR 16-1-3 Ed. 2.0 (English 2004)) 28pp
Adopts CISPR 16-1-3,Ed.2 (2004) which specifies the characteristics and calibration of the absorbing clamp for the measurement of radio disturbance power in the frequency range 30 MHz to 1 GHz. (TE-003)
AS/NZS CISPR 16.4.1:2006 Uncertainties, statistics and limit modellingUncertainties in standardized EMC tests (CISPR/TR 16-4-1 Ed. 1.1 (English 2005)) 74pp
Provides guidance on the treatment of uncertainties to those who are involved in the development or modification of CISPR electromagnetic compatibility (EMC) standards. (TE-003)
AS/NZS CISPR 13:2004 Sound and television broadcast receivers and associated equipmentRadio disturbance characteristicsLimits and methods of measurement (CISPR 13 Ed. 4.1 (Bilingual 2003)) 33pp
Adopts CISPR 13:2003 which specifies the generation of electromagnetic energy from sound and television receivers for the reception of broadcast and similar transmissions and from associated equipment. The frequency range covered extends from 9 kHz to 400 GHz. (TE-003)
AS/NZS CISPR 16.1.4:2004 (2nd Edition) Radio disturbance and immunity measuring apparatusAncillary equipment Radiated disturbances (CISPR 16-1-4 Ed. 1.1 (English 2004)) 64pp
Adopts CISPR 16-1-4:2004, Ed 1.1 which specifies the characteristics and performance of equipment for the measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz. (TE-003)
AS/NZS CISPR 16.4.2:2004 Uncertainties, statistics and limit modellingUncertainty in EMC measurements (CISPR 16-4-2 Ed. 1.0 (Bilingual 2003)) 17pp
Adopts CISPR 16-4-2 which specifies the manner in which measurement uncertainty is to be taken in to account in determining compliance with CISPR limits. (TE-003)
AS/NZS CISPR 14 Electromagnetic compatibilityRequirements for household appliances, electric tools and similar apparatus AS/NZS CISPR 14.1:2003 Emission (CISPR 14-1 Ed. 4.2 (Bilingual 2002)) 62pp
Establishes uniform requirements for the conduction and the radiation of radio-frequency disturbances from appliances whose main functions are performed by motors and switching or regulating devices, unless the the r.f. energy is intentionally generated or intended for illumination. (TE-003)
AS/NZS CISPR 16.1.5:2004 Radio disturbance and immunity measuring apparatusAntenna calibration test sites for 30 MHz to 1000 MHz (CISPR 16-1-5 Ed. 1.0 (Bilingual 2003)) 44pp
Adopts CISPR 16-1-5 which specifies the requirements for calibration test sites, used to perform antenna calibrations, as well as the test antenna characteristics, calibration site verification procedure and site compliance criteria. (TE-003)
AS/NZS CISPR 16.4.3:2004 (2nd Edition) Uncertainties, statistics and limit modellingStatistical considerations in the determination of EMC compliance of massproduced products (CISPR/TR 16-4-3 Ed. 2.0 (English 2004)) 27pp
Adopts CISPR 16-4-3, Ed.2 (2004) which specifies recommendations on statistics of disturbance complaints, on the significance of CISPR limits, and specific reports. (TE-003)
AS/NZS CISPR 14.2:2003 ImmunityProduct family standard (CISPR 14-2 Ed. 1.1 (Bilingual 2001)) 15pp
Provides manufacturers, designers and suppliers of household appliances, electric tools and similar appa-
AS/NZS CISPR 16.2.1:2006 Methods of measurement of disturbances and immunityConducted disturbance measurements (CISPR 16-2-1 Ed. 1.1 (Bilingual 2005)) 63pp
Specifies the methods of measurement of disturbance phenomena in general in the frequency range 9 kHz to 18 GHz and especially of conducted disturbance phenomena in the frequency range 9 kHz to 30 MHz. (TE-003)
AS/NZS CISPR 16.4.4:2004 Uncertainties, statistics and limit modellingStatistics of complaints and a model for the calculation of limits (IEC CISPR 16-4-4:2003) 32pp
Adopts CISPR 16-4-4 which specifies the calculation of limits for disturbance field strength and disturbance voltage for the measurement on the test site on the basis of models for the generation of disturbance for radiation coupling respectively for mains coupling. (TE-003)
10pp
Provides general rules and basic conventions for the types of lines to be used on shipbuilding drawings. (ME-072)
Specifies reference equivalent threshold sound pressure levels (RETSPLs) of pure tones in the frequency range from 8 kHz to 16 kHz, applicable to the calibration of air conduction audiometers for specific earphones. This Standard is identical with and reproduced from ISO/TR 389-5:1998. (AV-003)
AS/NZS CISPR 22:2006 Information technology equipmentRadio disturbance characteristicsLimits and methods of measurement (CISPR 22 Ed. 5.2 (English 2006)) 71pp
Establishes uniform requirements for the radio disturbance level of the equipment contained in the scope, to fix limits of disturbance, to describe methods of measurement and to standardize operating conditions and interpretation of results. (TE-003)
AS ISO 140 AcousticsMeasurement of sound insulation in buildings and of building elements AS ISO 140.42006 Field measurements of airborne sound insulation between rooms (ISO 1404:1998, MOD) 25pp
Adopts ISO 140-4:1998 to provide field methods for measuring the airborne sound insulation properties of interior walls, floors and doors between two rooms under diffuse sound field conditions in both rooms. (AV-004)
AS ISO 389.72003 Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:1996) 9pp
Specifies a reference threshold of hearing for the calibration of audiometric equipment. (AV-003)
AS EN 5402002 Clinical investigation of medical devices for human subjects (EN 540:1993) 14pp
Specifies the requirements for the conduct of clinical investigations and documentation on the performance of medical devices, to determine any undersirable side effects and permit the assessment of acceptable risks. (HE-012)
AS/NZS CISPR 24:2002 Information technology equipmentImmunity characteristicsLimits and methods of measurement (CISPR 24 Ed. 1.0 (Bilingual 1997)) 29pp
Establishes the unifrom requirements for the electromagnetic immunity of information technology equipment and specifies applicable tests, test levels, product operating conditions and assessment criteria. This Standard is identical to and has been reproduced from CISPR 24:1997. (TE-003)
AS ISO 140.62006 Laboratory measurements of impact sound insulation of floors (ISO 140-6:1998) 15pp
Adopts ISO 140-6:1998 to provide a laboratory method for measuring impact noise transmission through floors by using a standard tapping machine. (AV-004)
AS/NZS CISPR 25:2004 Radio disturbance characteristics for the protection of receivers used on board vehicles, boasts, and on devicesLimits and methods of measurement (CISPR 25 Ed. 2.0 (English 2002)) 56pp
Adopts CISPR 25 which develops limits and methods of measurement regarding Radio disturbance characteristics, for the protection of receivers used on board vehicles, boats, and on devices. (TE-003)
AS/NZS ISO 140.7:2006 Field measurements of impact sound insulation of floors (ISO140-7:1998, MOD) 18pp
Adopts ISO140-7:1998 with national modifications to specify field methods for the measuring the impact sound insulation properties of building floors by using a standard tapping machine. This method is applicable bare floors and also to floor with coverings. (AV-004)
AS/NZS ISO 544:2005 Welding consumablesTechnical delivery conditions for welding filler materialsType of product, dimensions, tolerances and markings (ISO 544:2003) 8pp
Provides requirements for the technical delivery conditions of welding filler materials for fusion welding. (WD-002)
AS EN 556 Sterilization of medical devices Requirements for medical devices to be designated "STERILE" AS EN 556.12002 Requirements for terminally sterilized medical devices (EN 556.1:2001) 5pp
Specifies requirements for a terminally-sterilized medical device to be designated 'sterile'. (HE-023)
AS ISO 128 Technical drawingsGeneral principles of presentation AS ISO 128.12005 Introduction and index (ISO 128-1:2003)
AS ISO 140.82006 Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (ISO 140-8:1997) 14pp
Adopts ISO 140-8:1997 to provide a method for measuring the acoustic properties of floor coverings from the view point of reducing impact noise transmission. (AV-004)
AS 681 Elastomeric sealsMaterial requirements for pipe joint seals used in water and drainage applications AS 681.12008 Vulcanized rubber (EN 681-1:1996)
10pp
Specifies general rules for the execution of technical drawings as well as presentation of structures. Includes an index for the ISO 128 series. (ME-072)
AS ISO 3542006 AcousticsMeasurement of sound absorption in a reverberation room (ISO 354:2003) 21pp
Adopts ISO 354:2003 to specify a method of measuring the sound absorption coefficient of acoustical materials used as wall or ceiling treatments, or the equivalent sound absorption area of objects, such as furniture, persons or space absorbers, in a reverberation room. (AV-004)
16pp
10pp
Specifies the type of lines, designations and configuration as well as general rules for drafting of lines used in technical drawings. (ME-072)
Specifies requirements for materials used in vulcanized rubber seals for cold potable water supply (up to 50C), hot potable and non-potable water supply (up to 110C), and drainage, sewerage and rainwater systems (continuous flow up to 45C and intermittent flow up to 95C). (WS-010)
AS ISO 389 AcousticsReference zero for the calibration of audiometric equipment AS ISO 389.12007 Reference equivalent threshold sound pressure levels for pure tones and supraaural earphones (ISO 389-1:1998) 8pp
(AV-003)
16pp
AS ISO 128.222005 Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999) 8pp
Specifies general rules on presentation of leader and reference lines and their components, and the arrangement of instructions on or at leader lines in all kinds of technical documents. (ME-072)
Specifies requirements for materials used for moulded seals only of thermoplastic elastomers (TPE) used in joints of thermoplastic piping systems for gravity waste water discharge (intermittent flow up to 95C) inside buildings, thermoplastic piping systems for gravity underground drainage and sewerage (continuous flow up to 45C and intermittent flow up to 95C), and thermoplastic rainwater piping systems. (WS-010)
AS ISO 389.22007 Reference equivalent threshold sound pressure levels for pure tones and insert earphones (ISO 389-2:1994) 7pp
(AV-003)
12pp
AS ISO 389.32007 Reference equivalent threshold force levels for pure tones and bone vibrators (ISO 389-3:1994) 10pp
(AV-003)
AS ISO 389.52003 Reference equivalent threshold sound pressure levels for pure tones in frequency range 8 kHz to 16 kHz (ISO/TR 389-5:1998) 4pp
AS 1012.4.21999 Determination of air content of freshly mixed concreteMeasuring reduction in air pressure in chamber above concrete 7pp
Covers the method for determining the air content of freshly mixed concrete from observations of the reduction in air pressure in a chamber above the concrete when the concrete is exposed to the air pressure. (BD-042)
19pp
Provides a method whereby the frequency dependent values of airborne sound insulation of building elements and in building can be converted into a single number characterizing the acoustical performance. This Standard is identical with and reproduced from ISO 717-1:1996. (AV-004)
AS 10061995 Solid-stem general purpose thermometers (ISO 1770:1981, ISO 1770:1981/Amd 1:1983) 7pp
Specifies requirements for low-cost 'commercial quality' thermometers suitable for use where great accuracy of temperature measurement is not required. The temperature range covered is from minus 100C to plus 500C. Requirements relate to materials, construction and dimensions, graduation and figuring, scale error and marking. This Standard is identical with and reproduced from ISO 1770:1981 and its Amendment 1:1983. (CH-030)
AS 1012.4.31999 Determination of air content of freshly mixed concreteMeasuring air volume when concrete dispersed in water 6pp
Covers the method for determining the air content of freshly mixed concrete using the volumetric method. (BD-042)
12pp
Defines and provides methods for determining single number quantities for the impact sound insulation in buildings. This Standard is identical with and reproduced from ISO 717-2:1996. (AV-004)
AS EN 7242002 Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices (EN 724:1994) 36pp
Provides guidance on the establishment and maintenance of quality systems specified in EN 29001/EN 46001 or EN 29002/EN 46002 for the manufacture of non-active medical devices (QR-008)
AS 10111993 Information processing systemsUnrecorded 12.7 mm (0.5 in) wide magnetic tape for information interchange32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3200 ftpi) phase encoded and 356 ftpmm (9042 ftpi), NRZ1 (ISO/IEC 1864:1992) 15pp
Specifies the characteristics of 12.7 mm (0.5 in) wide magnetic tape with reel to enable magnetic and mechanical interchangeability of such tape between information processing systems. This Standard is identical with, and has been reproduced from, ISO/IEC 1864:1992. (IT-001)
AS 1012.51999 Determination of mass per unit volume of freshly mixed concrete 5pp
Covers the method for determining the mass per unit volume of freshly mixed concrete that is in the plastic state. (BD-042)
AS/NZS 999:1999 Information and documentationGuidelines for the content, organization and presentation of indexes (ISO 999:1996) 47pp
Provides guidelines for the content, organization and presentation of indexes. These apply to indexes of books, periodicals, reports, patent documents and other written or printed documents, and also to non-print materials, such as electronic documents, films, sound recordings, video recording, graphic material, maps and three-dimensional objects. This Standard is identical with and has been reproduced from ISO 999:1996. (IT-019)
AS 1012.8.12000 Method of making and curing concreteCompression and indirect tensile test specimens 17pp
Describes the method for the making and curing of compression and indirect tensile test specimens of concrete sampled in the laboratory or in the field. (BD-042)
Describes the method for obtaining samples of freshly-mixed concrete directly from mixers, from agitator or non-agitator units, from concrete deposited in readiness for casting, and from concrete deposited in the forms. (BD-042)
AS ISO 10001998 The international system of units (SI) and its application (ISO 1000:1992) 23pp
Describes the international system of units and selected decimal multiples and submultiples of SI units for general use. This Standard is identical with and has been reproduced from ISO 1000:1992. (ME-071)
10pp
AS 10011970 Plain setting rings for internal measuring equipment (metric series) (BS 4064:1966) 10pp
Covers rings for setting instruments used for precision measurements of internal diameters by two-point or threepoint contact methods in diameters from 2 mm to 150 mm. It establishes a series of blank sizes; defines material, its heat treatment and hardness; and specifies finish and accuracy of working surface. Three grades of accuracy are provided for. For inch series rings see AS B294. (ME-027)
Covers the method for determining the compressive strength of concrete test specimens prepared in accordance with the provisions of AS 1012.8, AS 1012.14 or AS 1012.19. (BD-042)
AS 1012.3.21998 Determination of properties related to the consistency of concreteCompacting factor test 5pp
Covers the method for determining the compacting factor of concrete, when the nominal size of aggregate does not exceed 40 mm. (BD-042)
AS 1012.102000 Determination of indirect tensile strength of concrete cylinders ('Brasil' or splitting test) 5pp
Describes a method for determining the indirect tensile strength of standard concrete cylinders, prepared in accordance with AS 1012.8.1. (BD-042)
23pp
Establishes main design features, general dimensions, material, finishes, methods and marking of support, and accuracies for cast-iron, steel and stone straightedges. It provides for three grades of accuracy and covers the range of sizes from 250 mm to 5000 mm in cast-iron and from 250 mm to 2000 mm in steel and in stone. (ME-027)
AS 1004 Surface plates for metrology AS 1004.11998 Cast iron (ISO 8512-1:1990)
AS 1012.12.11998 Determination of mass per unit volume of hardened concreteRapid measuring method 3pp
(BD-042)
11pp
Specifies material, preferred sizes, rigidity, finish and other general features for cast iron surface plates in four accuracy grades. Annexes provide general information on care and use, testing and moderation in loading of surface plates. This Standard is identical with and has been reproduced from ISO 8512-1:1990. (ME-027)
AS 1012.4.11999 Determination of air content of freshly mixed concreteMeasuring reduction in concrete volume with increased air pressure 11pp
Covers method for determining the air content of freshly mixed concrete from observations of the change in volume of the concrete when it is subjected to an increased air pressure. (BD-042)
AS 1012.12.21998 Determination of mass per unit volume of hardened concreteWater displacement method 3pp
Covers method for determining the mass per unit volume of hardened concrete by a method involving weighing the specimen in a specified moisture condition and determining its volume by weighing the saturated specimen in water and also in air. (BD-042)
13pp
AS 1012.131992
AS 1012.131992 Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory 12pp
Amendment 1 11 October 1993 Sets out a method for determining the drying shrinkage of concrete. Generally similar to the 1970 edition, except that the differences between field and laboratory prepared specimens has been emphasized. (BD-042) tion of screw threads, design features of screw gauges, material and hardness requirements, and limits and tolerances of gauging elements, and is technically identical with ISO 1502, ISO General Purpose Metric Screw Threads Gauging. Appendices give notes on the function, use and checking of gauges, the bases for the gauge deviations and tolerances, and detailed examples of deriving specific gauge limits. (ME-028) methods are as follows:Drying in air, for free moisture.Drying in air, for residual moisture. (MN-001)
AS 1012.141991 Method for securing and testing cores from hardened concrete for compressive strength 7pp
Covers method for the securing and testing of cylindrical cores from hardened concrete for the determination of compressive strength for an estimate of the inservice strength of a structure or part thereof. (BD-042)
17pp
Sets out methods for the determination of moisture, ash and volatile matter on the analysis sample of higher rank coal in order to obtain its proximate analysis. (MN-001)
18pp
Describes a method for the determination of the gross calorific value, at constant volume, of coal and coke by using bomb calorimeters of the adiabatic and automatic isothermal type. (MN-001)
AS 1012.171997 Determination of the static chord modulus of elasticity and Poisson's ratio of concrete specimens (ASTM C 469:1994) 15pp
Specifies procedures for the determination of static chord modulus of elasticity and Poisson's ratio. (BD-042)
8pp
AS/NZS 1026:2004 Electric cablesImpregnated paper insulated For working voltages up to and including 19/33 (36) kV 47pp
Specifies the requirements for non-draining massimpregnated paper insulated and lead alloy sheathed cables for working voltages up to and including 19/33 (36)kV. (EL-003)
Sets out a procedure for the determination of carbon and hydrogen in the analysis sample of higher rank coal and coke, by burning a known mass of sample in oxygen so that all carbon is converted to carbon dioxide and all hydrogen to water. (MN-001)
AS 1012.181996 Determination of setting time of fresh concrete, mortar and grout by penetration resistance 6pp
Specifies procedures for determining the initial and final setting times of mortar sieved from fresh concrete mix, the slump of which is greater than zero, using penetration resistance needles. This Standard is also applicable to fresh mortar and grout. (BD-042)
8pp
AS 10281992 Power reactors and earthing transformers (IEC 60289 Ed. 2.0 (Bilingual 1988)) 45pp
Specifies requirements for the following type of reactors: shunt, current limiting, damping, tuning (filter), arcsuppression, smoothing reactors and earthing transformers, with the exception of small reactors with rating less than 2 kvar single-phase and 10 kvar three-phase. This Standard is technically identical with and has been reproduced from IEC 289:1988, with the addition of particular requirements for earth current-limiting neutral displacement reactors. (EL-008)
Sets out a method for the determination of nitrogen in the analysis sample of higher rank coal or coke by conversion to ammonium sulfate. Two methods for the distillation of ammonia are given. (MN-001)
AS 1038.6.3.11997 Higher rank coal and cokeUltimate analysisTotal sulfurEschka method 4pp
Sets out a procedure, by conversion of sulfur to sulfate with Eschka mixture and measurement of the sulfate gravimetrically, for the determination of total sulfur in the analysis sample of higher rank coal and coke. (MN-001)
AS 1012.19.12000 Accelerated curing of concrete compression test specimensHot water method 3pp
Specifies the hot water (82 degree C) method for the accelerated curing of compression test specimens of concrete, made in the laboratory or in the field. The method allows for the transportation of test specimens from the field to a curing tank in a laboratory. Specimens are tested between 23 h and 27 h from the time of batching. (BD-042)
AS 1033 High voltage fuses (for rated voltages exceeding 1000 V) AS 1033.11990 Expulsion type (IEC 60282-2 Ed. 1.0)
AS 1038.6.3.22003 Higher rank coal and cokeUltimate analysisTotal sulfurHigh-temperature combustion method 7pp
Sets out a method for determining the total sulfur content of an analysis sample by high temperature combustion. (MN-001)
AS 1012.19.22000 Accelerated curing of concrete compression test specimensWarm water method 4pp
Specifies the warm water (55 degree C) method for the accelerated curing of compression test specimens of concrete, made in the laboratory. Specimens are tested between 26 h and 28 h from time of batching. The method requires that the specimens be prepared adjacent to the curing tank. (BD-042)
71pp
Specifies requirements for expulsion fuses, including boric acid type, disconnector fuses, and drop-out fuses for use on 50 Hz and 60 Hz alternating current systems of rated voltages above 1000 V, up to and including 72.5 kV. Classifies fuses according to spark production, transient recovery voltage capability, and speed of operation. (EL-007)
AS 1012.201992 Determination of chloride and sulfate in hardened concrete and concrete aggregates 4pp
Sets out a separate solution method which can be used in aggregate or concrete laboratories to indicate whether chlorides or sulfates are present over a threshold detectable quantity. (BD-042)
AS 1033.21988 Current-limiting (powder-filled) type (IEC 60282-1 Ed. 3.0 (1985), IEC 60644 Ed. 1.0 (Bilingual 1979), IEC 60787 Ed. 1.0 (Bilingual 1983)) 36pp
Applies to all types of powder-filled high voltage current limiting fuses designed for service indoors and outdoors on a.c. systems of rated voltages exceeding 1000 V and in high voltage a.c. equipment. Includes service conditions, definitions ratings, standard conditions of use and behaviour, and the specification of characteristic. (EL-007)
AS 1038.6.42005 Higher rank coal and cokeUltimate analysisCarbon, hydrogen and nitrogen Instrumental method 5pp
Sets out an instrumental method for determining carbon, hydrogen and nitrogen in coal and coke. (MN-001)
AS 1012.211999 Determination of water absorption and apparent volume of permeable voids in hardened concrete 5pp
Covers the procedure for determining the immersed absorption (Ai) and, if required, boiled absorption (Ab) and apparent volume of permeable voids (AVPV) in hardened concrete. (BD-042)
AS 1038 Coal and cokeAnalysis and testing AS 1038.12001 Higher rank coalTotal moisture 18pp
7pp
Sets out methods for the determination of total moisture, free moisture and residual moisture in higher rank coal. (MN-001)
Sets out a high-temperature combustion titrimetric procedure for the determination of the chlorine content of coal and coke. (MN-001)
24pp
Specifies requirements for gauges for single start parallel general purpose metric screw threads manufactured to either AS 1721 or AS 1275. It covers types of gauges, inspec-
7pp
Sets out methods for the determination of total moisture, free moisture and residual moisture in coke. The
AS 1038.9.12000 Higher rank coal and cokePhosphorus Ash digestion/molybdenum blue method 6pp
AS 1038.10.5.22007 Coal and fly-ashTrace elements Determination of mercury contentAcid extraction method 5pp
Sets out a method for the determination of the mercury content in coal using acid extraction. (MN-001)
coke ash by heating a moulded specimen of the prepared ash, recording the shape of the specimen at regular intervals and observing the temperatures at which the characteristic fusibility shapes occur. (MN-001)
17pp
Sets out methods for the determination of sulfate sulfur, pyritic sulfur and organic sulfur in coal. (MN-001)
AS 1038.12.12002 Higher rank coalCaking and coking propertieseCrucible swelling number 6pp
Sets out a method for determining the crucible swelling number of coal, by heating the coal in a covered crucible. (MN-001)
AS 1038.172000 Higher rank coalMoisture-holding capacity (equilibrium moisture) (BS 1016-21, ISO 1018:1975) 7pp
Sets out a method for the determination of the moisture-holding capacity of higher rank coal. (MN-001)
AS 1038.12.21999 Higher rank coalCaking and coking propertiesDetermination of Gray-King coke type 7pp
Sets out a method for the determination of the GrayKing coke type of higher rank coal. (MN-001)
8pp
Sets out methods for determining the particle size distribution of coke using square-hole screens (MN-001)
11pp
Sets out the requirements for the determination of abrasiveness of coal. This Standard is identical with and has been reproduced from ISO 12900:1997. (MN-001)
AS 1038.10.12003 Determination of trace elementsCoal, coke and fly-ashDetermination of eleven trace elementsFlame atomic absorption spectrometric method 19pp
Provides a method for the preparation of the ash and a flame atomic absorption spectrometric method for the determination of barium, beryllium, chromium, copper, lead, lithium, manganese, nickel, strontium, vanadium and zinc in ash prepared in the laboratory from higher rank coal, coke and fly-ash. Also provides an optional flame atomic emission spectrometric method for the determination of barium, as it gives improved sensitivity over flame atomic absorption spectrometry and it is not possible to determine barium by the latter technique with some instruments. (MN-001)
AS 1038.12.4.11996 Higher rank coalCaking and coking propertiesPlasticityContinuous-torque Gieseler method (ASTM D2639) 8pp
Sets out procedures for obtaining a relative measure of the plastic behaviour of higher rank coal when heated under prescribed conditions; applicable to methods in which the stirrer is operated continuously. (MN-001)
17pp
Sets out procedures for the determination of properties which are specific for coke, covering mechanical strength, reactivity and post-reaction strength. (MN-001)
AS 1038.21.1.12008 Higher rank coal and cokeRelative densityAnalysis sample/density bottle method 5pp
Sets out a method for the determination of the relative density of higher rank coal and coke by a relative density bottle method. (MN-001)
AS 1038.10.21998 Determination of trace elementsCoal and cokeDetermination of arsenic, antimony and seleniumHydride generation method 6pp
Sets out a method for the determination of arsenic, antimony and selenium in higher rank coal and coke. (MN-001)
AS 1038.14.12003 Higher rank coal ash and coke ashMajor and minor elementsBorate fusion/flame atomic absorption spectrometric method 12pp
Sets out a method for the determination of twelve elements in higher rank coal ash and coke ash by flame atomic absorption spectrometry after borate fusion. Methods for the determination of a further two elements are also referenced. (MN-001)
AS 1038.21.1.22002 Higher rank coal and cokeRelative densityAnalysis sample/volumetric method 3pp
Sets out a method for the determination of the relative density of higher rank coal and coke by a volumetric procedure. (MN-001)
AS 1038.10.31998 Determination of trace elementsCoal and cokeDetermination of boron content ICP-AES method 4pp
Sets out a method for the determination of boron in higher rank coal and coke using an inductivelycoupled plasma atomic emission spectrometer after ashing of the coal or coke in the presence of Eschka mixture. (MN-001)
AS 1038.14.22003 Higher rank coal ash and coke ashMajor and minor elementsAcid digestion/flame atomic absorption spectrometric method 15pp
Sets out methods for the determination of nine elements in higher rank coal ash and coke ash by flame atomic absorption spectrometry after acid digestion. Methods for the determination of a further two elements are also referenced. (MN-001)
AS 1038.10.42001 Determination of trace elementsCoal, coke and fly-ashDetermination of fluorine contentPyrohydrolysis method 15pp
Sets out a procedure for the pyrohydrolytic separation of fluorine from coal, coke and fly-ash and for determination of fluorine by gravimetric processing and either ion potentiometry or ion chromatography. (MN-001)
AS 1038.14.31999 Higher rank coal ash and coke ashMajor and minor elementsWavelength dispersive X-ray fluorescence spectrometric method 19pp
Sets our a wavelength dispersive X-ray fluorescence procedure for the determination of silicon, aluminium, iron, calcium, magnesium, sodium, potassium, titanium, manganese, phosphorus and sulfur. The method is applicable to coal ashes, coke ashes and boiler ashes having components of specified concentration ranges. (MN-001)
AS 1038.241998 Guide to the evaluation of measurements made by on-line coal analysers 39pp
Sets out the recommended practices for the evaluation of on-line coal analysers. It defines various categories of analysers and describes their operation. It also describes appropriate techniques of statistical assessment and makes specific recommendations concerning the procedures for evaluation and calibration maintenance of on-line analysers. (MN-001)
AS 1038.10.5.12003 Coal, coke and fly-ashTrace elements Determination of mercury contentTube combustion method 8pp
Sets out a method for the determination of mercury in coal, coke and fly-ash by sample combustion and cold vapour atomic absorption spectrometry. (MN-001)
9pp
AS 1038.151995 Higher rank coal ash and coke ashAsh fusibility 8pp
Sets out a furnace method for the determination of the fusibility characteristics of higher rank coal ash and
Sets out a method for the determination of the specific flow time of a coal in the Durham cone apparatus, as a rapid means of comparing the relative handleability of product coals. (MN-001)
AS 1038.262005
AS 1038.262005 Higher rank coal and cokeGuide for the determination of apparent relative density 5pp
Sets out a method for the determination of the apparent relative density of bulk samples of coal and a method for coke. (MN-001) communication cables and provides test methods to evaluate the properties specified. (CT-001) amounts greater than that specified: niobium 1%, tantalum 1%, titanium 2%, tungsten 11%, zirconium 1%. (CH-010)
AS/NZS 1050 Methods for the analysis of iron and steel AS/NZS 1050.1:1996 Sampling iron and steel for chemical analysis 38pp
Describes methods for sampling and sample preparation for the determination of the chemical composition of pig iron, cast iron and steel. Procedures are described for use with both liquid and solid metal. (CH-010)
4pp
AS 10451988 AcousticsMeasurement of sound absorption in a reverberation room (ISO 354:1985) 14pp Available Superseded
Sets out a method of measuring the sound of absorption coefficient of acoustical materials used as wall or ceiling treatments, of the equivalent sound absorption area of objects such as furniture, persons, or space absorbers, in a reverberation room. It is not intended for measuring the absorption characteristics of weakly damped resonators. (AV-004)
Sets out a spectrophotometric method for the determination of nickel content of iron and steel in the range 0.1 to 4%. The method is technically equivalent to ISO 4939, Steel and cast ironDetermination of nickel contentSpectrophotometric method, and will supersede AS K1, Part 191963, Nickel present in small amounts of carbon and low alloy steel (Photometric method). (CH-010)
AS/NZS 1050.20:1994 Determination of magnesium content (flame atomic absorption spectrometric method) 6pp
Specifies a flame atomic absorption spectrometric method for the determination of magnesium content between 0.010% and 0.25% in all types of iron and steel. (CH-010)
AS 1046 Letter symbols for use in electrotechnology AS 1046.11978 General (IEC 60027-1 Ed. 5.0 (1971), IEC 60027-1A Ed. 5.0 (1976)) 48pp
Specifies letter symbols for physical quantities and abbreviations and symbols for units for general use in electrical fields. Principles for use of the symbols are established. The Standard is closely aligned with IEC 27-1 and 27-1A. (TE-013)
AS/NZS 1050.6:1995 Determination of tin contentFlame atomic absorption spectrometric method 6pp
Specifies a flame atomic absorption spectrometric method for the determination of tin content of iron and steel. The sample is digested in acid, the tin extracted into trioctyl phosphine oxide in 4-methylpentan-2-one (MIBK) and then aspirated into a nitrous oxide/acetylene flame of an atomic absorption spectrometer. The absorption is measured at 235.5 nm. (CH-010)
AS 1046.21978 Telecommunications and electronics (IEC 60027-2 Ed. 1.0 (Bilingual 1972), IEC 60027-2A Ed. 1.0 (Bilingual 1975)) 32pp
Provides symbols for general quantities and for quantities concerning two-port networks, line transmission of signals (including cables), radio wave propagation, waveguide propagation, aerials, electro-acoustics, equivalent circuits of piezo-electric crystals, scattering matrix and transfer matrix, static convertors, automatic control science and technology. It supplements AS 1046, Part 1, and is closely aligned with IEC 27-2 and 27-2A. (TE-013)
AS 1050.231990 Determination of molybdenum content Flame atomic absorption spectrometric method 4pp
Sets out a flame atomic absorption spectrometric method for the determination of molybdenum in steel in the range 0.005% to 2.5%. (CH-010)
8pp
AS 1046.31991 Logarithmic quantities and units (IEC 60027-3 Ed. 2.0 (Bilingual 1989))
9pp
Defines logarithmic quantities and units. The logarithmic quantities dealt with are transmission path quantities, levels, frequency intervals and decision content. This Standard is identical with and has been reproduced from IEC 27-3:1989. (TE-013)
Specifies a spectrophotometric method for the determination of aluminium content in the range of 0.002% to 1.4% aluminium in all types of iron and steel. The method uses a mercury cathode, followed by solvent extraction to separate interfering elements, with alizarin red S to produce a chromogen which is measured at a wavelength of 490 nm. (CH-010)
AS 1046.41991 Symbols for quantities to be used for rotating electrical machines (IEC 60027-4 Ed. 1.0 (Bilingual 1985)) 16pp
Tabulates a large number of letter symbols for quantities related to rotating electrical machines. These symbols cover dimensional parameters as well as performance under different operating conditions. This Standard is identical with and has been reproduced from IEC 27-4:1985. (TE-013)
AS 1050.251986 Determination of lead content (flame atomic absorption spectrometric method) 3pp
Sets out the flame atomic absorption spectrometric method for the determination of lead in iron and steel. (CH-010)
AS/NZS 1050.16:1994 Determination of sulfur contentInfrared absorption method after combustion in an induction furnace (ISO 4935:1989) 7pp
Specifies an infrared absorption method after combustion of the test portion at high temperature in a current of pure oxygen using a high frequency induction furnace. The method can be used for the determination of sulfur content between 0.002% and 0.10% in steel. This Standard is identical with and reproduced from ISO 4935:1989. (CH-010)
8pp
66pp
Specifies a spectrophotometric method using reduced -silicomolybdate complex, for the determination of the total silicon content of iron and steel. The method covers the range 0.005% to 5.0% silicon and is applicable to all grades of iron and steel. (CH-010)
Specifies a numerical system for the designation of types of fibreboard boxes based on groups of category, supplemented by letters and symbols related to dimensions and elements of construction. (PK-025)
AS 1049 Telecommunication cablesInsulation, sheath and jacket AS 1049.12008 Materials AS 1049.22008 Test methods 40pp
(CT-001)
4pp
Sets out a spectrophotometric method for the determination of copper in iron and steel in the range 0.02% to 5%. The method is technically equivalent to ISO 4946, Steel and cast ironDetermination of copper contentSpectrophotometric method, and will supersede AS K1, Methods for the analysis of iron and steel, Part 171961, Copper in iron and steel (Absorptiometric method). (CH-010)
66pp
(CT-001)
7pp
Specifies a spectrophotometric method for the determination of the phosphorus content of iron and steel. The method is applicable to the determination of phosphorus contents between 0.005% and 2.0%, provided that the following elements are not present in
AS/NZS 1050.31:1994 Determination of niobium contentPAR spectrometric method (ISO 9441:1988) 6pp
Specifies a PAR spectrometric method for the determination of niobium content between 0.005% and 1.3% in steel. This Standard is technically identical with and reproduced from ISO 9441:1988. (CH-010)
6pp
Describes data acquisition methods that enable the investigation of specific environmental noise situations to be checked for compliance with a specific noise limit. (EV-010)
AS EN 1060.32004 Supplementary requirements for electromechanical blood pressure measuring systems (EN 1060-3:1997) 28pp
Describes performance, efficiency and safety requirements for electro-mechanical blood pressure measuring systems that, by means of an inflatable cuff are used for non-invasive measurements of arterial blood pressure at the upper arm, the wrist and the thigh. Also specifies requirements for their accessories and gives test methods. (HE-022)
AS 10651988 Non-destructive testingUltrasonic testing of carbon and low alloy steel forgings 29pp
Sets out methods for manual ultrasonic testing of carbon and low alloy steel forgings at three recording levels by the use of equivalent reflector sizes. Appendices provide information on probe selection, reflectivity diagrams, testing of curved surfaces, selection of beam angle and classification of discontinuities. (MT-007)
AS 1050.331988 Determination of nickel contentFlame atomic absorption spectrometric method (ISO 4940:1985) 4pp
Sets out a flame atomic absorption procedure for the determination of nickel in iron and steel in the range of 0.002% to 0.5%. The method is technically identical to ISO 4940, Steel and cast ironDetermination of nickel contentFlame atomic absorption spectrometric method. (CH-010)
AS/NZS 1050.37:1994 Determination of copper contentFlame atomic absorption spectrometric method (ISO 4943:1985) 6pp
Specifies a flame atomic absorption spectrometric method for the determination of copper content between 0.004% and 0.50% in steel. This Standard is identical with and reproduced from ISO 4943:1985. (CH-010)
Amendment 1 13 July 1992 Amendment 2 5 December 1995 Amendment 3 5 August 1996 Amendment 4 1 April 2000 Amendment 5 19 September 2005 Specifies general construction and performance requirements for electric storage water heaters of 25 L to 630 L rated hot water delivery. (Requirements for gas water heaters are specified only by reference to Code AG 102 published by AGA/ALPGA.) To be read in conjunction with AS 1056.2 or AS 1056.3 as appropriate. (EL-020)
50pp
Proposes a specification of physical properties for sunglasses and sunglass lenses of nominal plano power, and which are not prescription lenses, intended for protection against solar radiation for general use, for social and domestic purposes, including road use and driving. (CS-053)
AS 1067 Sunglasses and fashion spectacles AS 1067.11990 Safety requirements Available Superseded 15pp
AS/NZS 1050.38:1994 Determination of vanadium content Flame atomic absorption spectrometric method (ISO 9647:1989) 8pp
Specifies a flame atomic absorption spectrometric method for the determination of vanadium content between 0.005% and 1.0% in steel. This Standard is identical with and reproduced from ISO 9647:1989. (CH-010)
AS 1056.21985 Specific requirements for water heaters with single shells 6pp
Specifies constructional requirements for water containers (shells) made of single materials, viz. plastics, copper or copper alloys, or stainless steel. Gives recommendations on maximum water temperature and specifies routine and type test schedules. (EL-020)
AS 1056.31991 Specific requirements for water heaters with composite shells 13pp
Specifies constructional requirements for water containers (shells) made of composite materials, viz. steel with a copper or copper alloy insert (inner liner), or steel with a bonded inner lining of vitreous enamel or of plastics material. Gives recommendations on maximum water temperatures, specifies methods of testing the quality of inner linings, and also routine and type test schedules. (EL-020)
Amendment 1 10 December 1990 Amendment 2 12 July 1993 Sets out safety requirements for general purpose sunglasses intended to reduce glare from natural sunlight, specific purpose sunglasses intended to reduce intense glare, and fashion spectacles worn for their fashion properties only. It specifies the optical characteristics for sunglasses and fashion spectacles and removes upper coloration limits for general purpose sunglasses. (CS-053)
AS/NZS 1050.39:1994 Determination of chromium content Flame atomic absorption spectrometric method (ISO 10138:1991) 10pp
Specifies a flame atomic absorption spectrometric method for the determination of chromium content between 0.002% and 2.0% in non-alloy and low alloy steel. The procedure involves dissolution of a test portion in acid and determination of the atomic absorption of the chromium spectral line, measured at either 357.9 nm or 425.4 nm in a flame atomic absorption spectrometer. This Standard is identical with and reproduced from ISO 10138:1991. (CH-010)
AS/NZS 1056.4:1997 Daily energy consumption calculations for electric types 29pp
Sets out a method for calculating the energy consumption of electric storage water heaters fitted with electric resistance heating units. This Standard is not applicable to gas water heaters, solar water heaters, heatexchangers or heat-pumps. The Standard is based on known performance characteristics of electric storage water heaters under static conditions (i.e. standing heat losses with no deliver) and using an energy delivery of 37.7 MJ per day (equivalent to a volume of 200 L of water raised in temperature by 45 C). (EL-020)
AS 1076 Code of practice for the selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (Other than mining applications) AS 1076.11977 Basic requirements Obsolescent 88pp
AS/NZS 1052:1992 CISPR specification for radio interference measuring apparatus and measurement methods (CISPR 16 (1987)) 132pp
Stipulates performance requirements for radio interference measuring apparatus, including the associated artificial mains network. Technically identical with IEC/CISPR 16:1987. (TE-003)
Provides basic information on the selection of electrical apparatus, and its installation, alteration and maintenance to ensure safe use in areas where combustible materials are generated, prepared, processed, handled, stored or otherwise used, and which are therefore potentially hazardous. It supplements the requirements of Section 9 of AS 3000-SAA Wiring Rules. (EL-014)
AS 1055 AcousticsDescription and measurement of environmental noise AS 1055.11997 General procedures (ISO 1996-1:1982)
10pp
Specifies requirements for non-invasive sphygmomanometers and their accessories which, by means of an inflatable cuff, are used for the non-invasive measurement of arterial blood pressure (HE-022)
15pp
AS 1076.81977
AS 1076.81977 Apparatus with type of protection 's' Special protection 20pp
Deals with apparatus certified or assessed in accordance with the requirements of type of protection 's'. It does not apply to underground mining, but may be applied to certain surface mining installations. For the purpose of the Standard, explosion risks due to the presence of combustible gases and vapours only are considered. (EL-014) density (basic density). A method is given for calculating the nominal density adjusted to 12% moisture content. (TM-003) round shank steel dogspikes for use with the steel rails specified in AS 1085.1. (CE-002)
AS 1081 AcousticsMeasurement of airborne noise emitted by rotating electrical machinery AS 1081.11990 Engineering method for free-field conditions over a reflective plane (ISO 1680-1) 15pp
Specifies an engineering method for measuring the sound pressure levels on a rectangular parallel piped surface enveloping the machine and for calculating sound power level produced by the machine. Applies to the rotating electrical machines, such as motors, and generators (d.c. and a.c.) without any limitations on the output voltage but with the limit of the linear dimensions not to exceed 15 m. Identical with and reproduced from ISO 1680-1. (AV-006)
9pp
Specifies requirements for one-piece rail anchors for application to steel rails rolled in accordance with AS 1085.1. (CE-002)
AS 10771992 Single-use syringes (sterile) for the injection of 100 units per millilitre insulin (U-100) (ISO 8537:1991) 32pp
Amendment 1 13 April 1993 Specifies requirements for 1 mL, 0.5 mL, 0.3 mL and 0.25 mL syringes, individually packed with or without needles and intended for use once only, solely for injection of 100 units per millilitre of insulin (U-100). Syringes taking detachable needles have the 6% (Luer) fitting. Appendices include test methods for physical, chemical and biological requirements. (HE-010)
19pp
Specifies requirements for insulated joints for rail supplied as kits for field assembly or manufactured in a factory. (CE-002)
AS 1079 Packaging of items (sterile) for patient care AS 1079.11993 Selection of packaging materials for goods undergoing sterilization
56pp
14pp
4pp
Specifies sterilization-related performance requirements to be considered in the selection of packaging materials and packages intended for sterilization. (PK-018)
Defines survey method for the measurement of noise from electrical machines operating under steady noise conditions, the result of which can be expressed in sound power levels so that all machines tested using this Standard can be directly compared. Identical with and reproduced from ISO 1680-2. (AV-006)
Specifies requirements for design, manufacture and installation of prestressed concrete sleepers, for use in railway track. Test methods are given in appendices, including sleeper bending, electrical short and repeated load tests. Information is also given on the background of the design methods, design of special sleepers and dynamic considerations. Reference is made to AS 1085.19 for requirements for resilient fastenings. (CE-002)
AS 1079.21994 Non-reusable papersFor the wrapping of goods undergoing sterilization in health care facilities 4pp
Specifies requirements for plain unimpregnated, impregnated and crepe paper intended for the wrapping of materials and equipment for sterilization in health care facilities by steam under pressure or by ethylene oxide. (PK-018)
AS 10831971 Glossary of terms for defects in woven and knitted textile piece goods 23pp
Corrigendum 1 1 August 1972 Covers terms and definitions in separate parts for woven and for knitted goods, with alternative terms also given. An alphabetical list of all the terms is provided, with the preferred terms and the relevant part indicated. (TX-020)
39pp
Specifies performance requirements for steel sleepers, covering track compatibility, service life, rail restraint and support, maintenacne, marking and handling. Methods are given for establishing loads and performing design. Appendices include deemed to comply sleeper profiles and tolerances, a number of test methdos, information for purchasers, and guidance on design of special sleepers. (CE-002)
24pp
AS 1079.52003 Single-use, non-woven wrapping materialsFor goods undergoing sterilization in health care facilities 13pp
Specifies requirements for single-use non-woven materials made of natural or man-made (synthetic) fibres or their blends intended for use as non-reusable wraps for goods undergoing sterilization in health care facilities. (HE-014)
Amendment 1 14 March 2005 Specifies performance requirements for as-rolled and head-hardened steel rail, covering track compatibility, service life, material integrity, connection, maintenance and handling. Asymmetric switch rails and elevated guardrails are also covered. Appendices give deemed to comply solutions for profiles, tolerances, chemical composition, mechanical properties and specify test methods for inclusions and surface finish. Guidance to purchasers, information on compliance and on residual stresses in rail is also given in appendices. (CE-002)
Specifies requirements for screw spikes and threaded inserts for use with sleeper plates, fastenings and sleepers in railway permanent way. The preferred shape is specified and other shapes given in an Appendix. (CE-002)
56pp
Specifies requirements for resilient fastenings for use in railway track. It covers all parts of the fastening assembly including clips, insulators, pads etc. Test methods are given in Appendices. (CE-002)
AS 1085.22002 Fishplates
14pp
67pp
Specifies dimensions, properties and materials for bartype rolled or forged fishplates for use with steel rails rolled in accordance with AS 1085, Part 1. Dimensions, tolerances and materials requirements are included. Full development profiles are given for rolled fishplates for 31, 41, 47, 50, 53 and 60 kg rails and for forged fishplates for 50 and 60 kg rails. (CE-002)
Sets out performance requirements and tests for welding of steel rail. Gives detailed requirements for flash butt welding, aluminothermic welding and metal arc welding (for repairs). Qualification of the welding procedure is covered, including criteria for requalification when parameters are changed. Test methods are given in appendices. (CE-002)
Specifies methods for sampling and testing timber for moisture content by oven drying and by use of an electrical resistance moisture meter. Correction figures for a large number of Australian, New Zealand and imported species, seasoned, unseasoned and treated, are provided. (TM-003)
29pp
Specifies requirements for clip-fastening and double shoulder sleeper plates made from rolled steel or cast iron. Materials, dimensions and tolerances are given. Some plates are given in appendices. A bending test is specified for rolled steel plates. (CE-002)
AS 10872003 Sodium hypochlorite solutions for use in the dairying industry 17pp
Sets out requirements for manufacturers of sodium hypochlorite for the dairying industry. It also provides guidelines for the dairying industry for the use of sodium hypochlorite solutions for sanitzing equipment and surfaces. (FT-025)
6pp
Sets out four test methods for determining the slope of grain in timber articles, as follows:The timber articles are either regular or irregular in plan or section, by means of a scribe;The timber articles are either regular or irregular in plan or section by reference to checks appearing on the surface;The timber articles are either regular or irregular in plan or section by the removal of splinters from the surface;The backsawn (flat sawn) and quartersawn surfaces of the timber articles exhibit grain deviation from the axis of symmetry. (TM-003)
8pp
Specifies requirements for steel heat-treated, ovalnecked fishbolts and nuts for use with steel rails in accordance with AS 1085.1 and fishplates rolled in accordance with AS 1085.2. (CE-002)
AS 1088 Hearing aids AS 1088.31987 Hearing aid equipment not entirely worn on the listener (IEC 60118-3 Ed. 2.0 (Bilingual 1983)) 5pp
Describes a method of determining the overall electroacoustic performance of hearing aid equipment not entirely worn on the listener, used in the rehabilitation of persons having impaired hearing. Technically identical with IEC Publication 118-3. (AV-003)
11pp
Specifies requirements for steel helical spring washers of single, double or triple configuration for use with screw spikes specified in AS 1085.18 and fishbolts and nuts specified in AS 1085.4 in railway permanent way. (CE-002)
3pp
Technically equivalent to ISO 31311975, it covers density at the moisture content at the time of test (nominal density), oven dry density and conventional
AS 1085.82002 Dogspikes
14pp
AS 1088.51987 Nipples for insert earphones (IEC 60118-5 Ed. 1.0 (Bilingual 1983))
3pp
Specifies requirements for 16 mm and 19 mm steel dogspikes with square shanks and 22 mm diameter
Defines the dimensions which are essential in order to ensure interchangeability of insert earphones as used
AS/NZS 1088.9:1995 Immunity requirements and methods of measurement for hearing aids exposed to radiofrequency fields in the frequency range 300 MHz to 3 GHz 8pp
Amendment 1 5 July 1996 Specifies electromagnetic immunity requirements to the frequency band 300 MHz to 3 GHz for hearing aids with acoustic outputs. Hearing aids worn behind the ear, in the ear and on the body are covered, including those fitted with induction pickup coils. Protection requirements are provided for operation in the general environment and test methods for assessing those requirements are included. (AV-003)
tion diagrams such as: (a) track plans; and (b) sectionalizing diagrams; and graphical symbols for rolling stock for use in circuit and wiring diagrams only. (TE-013)
AS 1102.1011989 General information and general index (IEC 60617-1 Ed. 1.0 (Bilingual 1985)) 29pp
Provides general information on the structure of the new AS 1102 series, the terminology used, the numbering, presentation and use of the symbols, their adaption to computer-aided drafting (CAD) systems and a general index. Includes an A4 grid transparency at the back of the Standard. (TE-013)
31pp
AS 1094 Sterile hypodermic syringes for single use AS 1094.12004 Syringes for manual use (ISO 7886-1:1993)
25pp
Amendment 1 3 October 2005 Specifies requirements for sterilize single-use hypodermic syringes made of plastic materials and intended for the aspiration of fluids or for the injection of fluids immediately after filling. Excludes syringes for use with insulin, single-use syringes made of glass, syringes with needles permanently attached, syringes for use with power-driven syringe pumps, syringes pre-filled with the injection by the manufacturer, and syringes supplied with the injection as a kit for filling by a pharmacist. The Standard is reproduced from, and is identical with, ISO 7886-1:1993. (HE-009)
Sets out requirements and recommendations for structural engineering drawings to obtain common practice for the representation of structures and components, including reinforced and prestressed concrete, structural steel, timber and masonry. The methods form a basis for more detailed rules for specific applications. It adds to the requirements of AS 1100.101, Technical drawing, Part 101: General principles. (ME-072)
AS/NZS 1102.102:1997 Symbol elements, qualifying symbols and other symbols having general application (IEC 60617-2 Ed. 2.0 (Bilingual 1996)) 39pp
Provides information on symbol elements, qualifying symbols and other symbols having general application to the AS/NZS 1102 series. Based on but not equivalent to and reproduced from IEC 617-2:1996. (TE-013)
AS 1101 Graphic symbols for general engineering AS 1101.12007 Hydraulic and pneumatic systems (ISO 1219-1:2006)
AS/NZS 1102.103:1997 Conductors and connecting devices (IEC 60617-3 Ed. 2.0 (Bilingual 1996)) 20pp
Provides symbols for conductors and connecting devices, including terminals and cable fittings. Based on but not equivalent to and reproduced from IEC 6173:1996. (TE-013)
165pp
Establishes basic elements for symbols. It lays down rules for devising fluid power symbols for use on components and in circuit diagrams. (ME-035)
18pp
AS/NZS 1102.104:1997 Basic passive components (IEC 60617-4 Ed. 2.0 (Bilingual 1996)) 20pp
Provides symbols for basic passive components such as resistors, capacitors and inductors, ferrite cores, magnetic storage matrices, piezoelectric crystals, electret and delay lines. Based on but not equivalent to and reproduced from IEC 617-4:1996. (TE-013)
Corrigendum 1 1 August 1972 Corrigendum 2 1 April 1973 Specifies accuracy, design of gauging surfaces, procedure for setting, and other requirements for gauges covering a range of product thread diameters from 1.6 to 6 mm. Use of gauges is covered and a section provides for gauging of threads other than ISO metric, including inch series. (ME-027)
AS 1100 Technical drawing AS 1100.1011992 General principles (ISO 1101:1983, ISO 128:1982, ISO 129:1985, ISO 1660:1987, ISO 3040:1990, ISO 3098-1:1974, ISO 406:1987, ISO 5455:1979, ISO 5459:1981, ISO 6410) 229pp
Amendment 1 11 July 1994 Sets out the basic principles of technical drawing practice, and covers terminology and abbreviations used in technical drawings; materials, sizes and layout of drawing sheets; types and thicknesses of lines; types and dimensions of letters, numerals and symbols; drawing scales; projectioning; sectioning; dimensioning and geometry tolerancing and the conventional representation of features and parts. Appendices provide information on the development of pictorial drawings and geometry tolerancing. (ME-072)
AS 1101.41989 Machine elements (ISO 3952-1:1981, ISO 3952-2:1981, ISO 3952-3:1979, ISO 3952-4:1984) 31pp Obsolescent
Establishes the graphical symbols for machine elements for kinematic diagrams for use in all branches of industry. Definitions of key words used in this field are also given. The symbols are given in sections including those for motion of links, links and connections of their components, kinematic pairs, linkages and links, friction and gear mechanisms, cam mechanisms, Geneva and ratchet mechanisms, couplings and brakes, and miscellaneous mechanisms and their components. This Standard is identical with ISO 3952-1 1981, ISO 3952-21981, ISO 3952-31979 and ISO 3952-41984. (ME-072)
AS/NZS 1102.105:1997 Semiconductors and electron tubes (IEC 60617-5 Ed. 2.0 (Bilingual 1996)) 49pp
Provides symbols for semiconductor devices and electron tubes. This Standard is technically equivalent to and reproduced from IEC 617-5:1996. (TE-013)
AS/NZS 1102.106:1997 Production and conversion of electrical energy (IEC 60617-6 Ed. 2.0 (Bilingual 1996)) 43pp
Provides symbols for production and conversion of electrical energy, including windings, machines, transformers, reactors, primary cells and accumulators. Based on but not equivalent to and reproduced from IEC 617-6:1996. (TE-013)
AS 1101.51984 Piping, ducting and mechanical services for buildings 18pp Obsolescent
Establishes the graphical symbols and abbreviations for elements of piping, ducting and mechanical services for buildings and defines the principles of their use. (ME-072)
AS 1100.2011992 Mechanical engineering drawing (ISO 1302:1992, ISO 2162, ISO 2203:1973, ISO 2768-1:1989, ISO 2768-2:1989, ISO 6410, ISO 6411:1982, ISO 6412-1:1989, ISO 6412-2:1989, ISO 6413:1988, ISO 8062, ISO 8826-1:1989, ISO 9222-1:1989, ISO 9222) 71pp
Amendment 1 11 July 1994 Sets out recommendations for mechanical engineering drawing practice. Provides information on surface texture and welding, and the simplified representation of pipelines. Provides details on springs, gears, splines, rolling element bearings, seals and knurling. Appendices provide guidance on the tolerance of machined components and castings. (ME-072)
AS/NZS 1102.107:1997 Switchgear, controlgear and protective devices (IEC 60617-7 Ed. 2.0 (Bilingual 1996)) 66pp
Provides symbols for switchgear, controlgear and protective devices, including starters, relays, proximity and touch-sensitive devices, igniters and flag indicators. Based on but not equivalent to and reproduced from IEC 617-7:1996. (TE-013)
AS 1101.61989 Process measurement control functions and instrumentation (ISO 3511-1:1977, ISO 3511-2:1984, ISO 3511-3:1984, ISO 3511-4:1985) 49pp Obsolescent
Specifies symbols and an identifying code system for depicting instruments, instrumentation systems, process computers, and shared display and control functions in the field of process measurement and control in the process industries. Examples of use of the symbols are given. (ME-072)
AS/NZS 1102.108:1997 Measuring instruments, lamps and signalling devices (IEC 60617-8 Ed. 2.0 (Bilingual 1996)) 25pp
Provides symbols for measuring instruments, lamps and signalling devices, indicating/recording/ integrating instruments, counting devices, thermocouples, telemetering devices and electric clocks. Based on but not equivalent to and reproduced from IEC 6178:1996. (TE-013)
60pp
Provides architects, builders, drafting officers and others in the building industry with a common method for the representation of buildings and their components to enable the preparation and unambiguous interpretation of architectural drawings. (ME-072)
Describes graphical symbols for overhead power equipment and conductor rails for use in electric trac-
AS/NZS 1102.109:1997 TelecommunicationsSwitching and peripheral equipment (IEC 60617-9 Ed. 2.0 (Bilingual 1996)) 30pp
AS/NZS 1102.110:1997
Provides symbols for telecommunications switching and peripheral equipment, transducers, recorders and reproducers. Based on but not equivalent to and reproduced from IEC 617-9:1996. (TE-013)
AS 1112 ISO metric hexagon nuts AS 1112.12000 Style 1Product grades A and B (ISO 4032:1999)
clearance zones for rear-mounted power take-offs (PTOs) of types 1, 2 and 3 on agricultural tractors with a track setting of more than 1150 mm. (ME-065)
AS/NZS 1102.110:1997 TelecommunicationsTransmission (IEC 60617-10 Ed. 2.0 (Bilingual 1996)) 61pp
Provides symbols for telecommunications transmission, including telecommunication circuits, antennas, radio stations, microwave technology, frequency spectrum diagrams and fibre optics. This Standard is technically equivalent to and reproduced from IEC 61710:1996. (TE-013)
5pp
Amendment 1 6 September 2002 Specifies dimensions, tolerances and material requirements for style 1 hexagon nuts, ISO product gardes A and B with ISO metric coarse threads and diameter from 5 mm to 64 mm inclusive. This Standard is identical with and reproduced from ISO 4032:1999. (ME-029)
AS 1121.22007 Rear-mounted power take-off types 1, 2 and 3Narrow-track tractors, dimensions for master shield and clearance zone (ISO 500-2:2004) 4pp
Adopts ISO 500-2:2004 to specify dimensions for the master shield and clearance zones for rear-mounted power take-offs, of types 1, 2 and 3 on agricultural tractors having a track width of 1150 mm or less (narrow track tractors). (ME-065)
AS/NZS 1102.111:1997 Architectural and topographical installation plans and diagrams (IEC 60617-11 Ed. 2.0 (Bilingual 1996)) 44pp
Covers symbols on location diagrams for electrical equipment, electrical lighting, security and communication services, reticulation plans of electrical power systems and networks, topological maps of power supply systems and location of airport lighting. This Standard is technically equivalent to and reproduced from IEC 617-11:1996. (TE-013)
5pp
Specifies dimensions, tolerances and material requirements for hexagon nuts, ISO product gardes A and B with ISO metric coarse threads and diameter from 5 mm to 64 mm inclusive. This Standard is identical with and reproduced from ISO 4033:1999. (ME-029)
AS 1121.32007 Rear-mounted power take-off types 1, 2 and 3Main PTO dimensions and spline dimensions, location of PTO (ISO 500-3:2004) 13pp
Adopts ISO 500-3:2004 to specify the manufacturing requirements for and the location of rear-mounted power take-offs (PTOs) of types 1, 2 and 3 on agricultural tractors. (ME-065)
5pp
AS/NZS 1102.112:1995 Binary logic elements (IEC 60617-12 Ed. 2.0 (1991))
170pp
Specifies dimensions, tolerances and material requirements for hexagon nuts, ISO product grade C with ISO metric coarse threads and diameters from 5 mm to 64 mm inclusive. This Standard is identical with and reproduced from ISO 4034:1999. (ME-029)
AS 1121.42007 Guards for power take-off (PTO) driveshaftsStrength and wear tests and acceptance criteria (ISO 5674:2004) 23pp
Adopts ISO 500-4:2004 to specify laboratory tests to determine the strength and wear resistance of guards for power take-offs, drive shafts on tractors and machinery used in agriculture and forestry and their acceptance criteria. (ME-065)
Provides symbols for logic functions and their usage. The symbols have been prepared with a view to electrical applications but may also be applied to nonelectrical systems. This Standard is identical with and has been reproduced from IEC 617-12:1991. (TE-013)
AS/NZS 1102.113:1995 Analogue elements (IEC 60617-13 Ed. 2.0 (Bilingual 1993)) 31pp
Provides symbols to represent functions and devices for operating and producing analogue quantities. This Standard is identical with and has been reproduced from IEC 617-13:1993. (TE-013)
AS/NZS 1125:2001 Conductors in insulated electric cables and flexible cords 20pp
Amendment 1 23 August 2004 Specifies the requirements for conductors in insulated electric cables and flexible cords used for general wiring cables for land installations and, in the case of copper conductors only, for ships' wiring. The Standard does not apply to material used for the manufacture of conductors. (EL-003)
AS 1114 Numerical control of machines AS 1114.11985 Data format for positioning, line motion and contouring control equipment (ISO 6983-1:1982) 14pp
Specifies requirements and makes recommendations for a data format for positioning, line motion and contouring control systems used in the numerical control of machines. This will help with the coordination of system design in order to minimize the variety of program manuscripts required, to promote uniformity of programming techniques, and to foster interchangeability of input programs between numerically controlled machines of the same classification by type, process, function, size and accuracy. It is intended that simple numerically controlled machines be programmed using a simple format, which is systematically extensible for more complex machines. Technically identical with ISO 6983, Part 1. This Standard is not intended for use in specialized cases of numerically controlled flame cutting machines and drafting machines used specifically and exclusively in the shipbuilding industry. (IT-006)
AS 1110 ISO metric hexagon bolts and screws Product grades A and B AS 1110.12000 Bolts (ISO 4014:1999)
AS/NZS 1133:1996 WoolDetermination by the Airflow Method of the mean fibre diameter of core samples of raw wool (IWTO-28-93) 38pp
Amendment 1 5 July 1997 Amendment 2 5 November 1997 Amendment 3 5 August 1998 Sets out a method for the determination of the mean fibre diameter of wool fibres sampled from bales of raw wool by coring, using cutters of nominal diameter from 12 mm to 25 mm. It is identical with and has been reproduced from IWTO-28-93. (TX-012)
12pp
Specifies the dimensions, tolerances and material requirements for hexagon head bolts, ISO product grades A and B and ISO metric coarse threads and diameters from 1.6 mm to 64 mm inclusive. This Standard is identical with and reproduced from ISO 4014:1999. (ME-029)
11pp
AS/NZS 1134:1999 WoolDetermination of wool base and vegetable matter base of core samples of raw wool (IWTO-19-98) 49pp
Sets out the procedure to be used for determination of the wool base and vegetable matter base from which the commercial yields of classed growers' lots, interiors, bulk classed lots and deliveries are calculated. Applicable to core samples only and covers all forms of raw wool. This Standard is identical with and has been reproduced from IWTO19-98. (TX-012)
Specifies the dimensions, tolerances and material requirements for hexagon head screws, ISO product grades A and B with ISO metric coarse threads and diameters from 1.6 mm to 64 mm inclusive. This Standard is identical with and reproduced from ISO 4017:1999. (ME-029)
AS 1111 ISO metric hexagon bolts and screws Product grade C AS 1111.12000 Bolts (ISO 4016:1999)
AS 11151985 Numerical control of machinesAxis and motion nomenclature (ISO 841:1974) 9pp
Defines axis and motion nomenclature for numerically controlled machines. It is intended to simplify programming for all numerically controlled machines and to facilitate the interchangeability of recorded data. A right-handed rectangular Cartesian coordinate system is used to specify machine and workpiece movements. Specifies requirements identical with those in ISO Standards ISO 841. (IT-006)
15pp
Specifies requirements for thimbles that are suitable for use with Grade 1770, galvanized or ungalvanized, round strand, equal lay, 6 (36 or 6) 19 construction groups SealeWarrington + IWRC steel wire ropes. (ME-025)
9pp
Specifies the dimensions, tolerances and material requirements for hexagon head bolts, ISO product grade C with ISO metric coarse threads and diameters from 5 mm to 64 mm inclusive. This Standard is identical with and reproduced from ISO 4016:1999. (ME-029)
AS 1141 Methods for sampling and testing aggregates AS 1141.01999 List of methods AS 1141.11996 Definitions 2pp
(CE-012)
AS 1121 Agricultural tractor power take-offs AS 1121.12007 Rear-mounted power take-off types 1, 2 and 3General specifications, safety requirements, dimensions for master shield and clearance zone (ISO 500-1:2004, ISO 500-1:2004/Cor 1:2005) 6pp
Adopts ISO 500-1:2004 to specify speeds, safety requirements, the dimensions of the master shield and
9pp
2pp
Specifies the dimensions, tolerances and material requirements for hexagon head screws, ISO product grade C with ISO metric coarse threads and diameters from 5 mm to 64 mm inclusive. This Standard is identical with and reproduced from ISO 4018:1999. (ME-029)
Describes terms used in the AS 1141 series of Methods for the sampling and testing of aggregates used in concrete, asphalt, sprayed bituminous surfacing, pavements, railway ballast and for any other engineering purposes. (CE-012)
10
8pp
Describes requirements for the basic equipment required for the performance of tests in the AS 1141 series. (CE-012)
AS 1141.3.11996 SamplingAggregates
16pp
5pp
Specifies methods and defines principles for sampling aggregates and sands, for subdividing samples and for packing and forwarding samples for testing. A number of photographs assist in describing the taking of samples and increments. (CE-012)
6pp
Describes the method for the determination of the degradation factor of coarse aggregates. (CE-012)
4pp
Sets out the method for determining the angularity number of an aggregate. (CE-012)
3pp
Describes the method for the determination of the voids in dry compacted filler for asphalt. (CE-006)
3pp
4pp
Amendment 1 5 June 1999 Sets out the method for testing rock for resistance to wear using the Deval attrition machine, and for measuring the attrition value of freshly crushed rock. (CE-012)
Describes the method for determining the bulk density of fine, coarse, or mixed aggregates. (CE-012)
4pp
AS 1141.191998 Fine particle size distribution in road materials by sieving and decantation 6pp
Describes method for the determination of the fine particle size distribution in road materials. (CE-012)
Describes the method for the determination of the Ball mill value of rock spalls, drill cores and ripped or broken rock. (CE-012)
AS 1141.6.12000 Particle density and water absorption of coarse aggregateWeighing-in-water method 5pp
Describes the method for determining the particle density, apparent particle density and water absorption of aggregates substantially retained on a 4.75 mm sieve, by weighing in water. (CE-012)
AS 1141.20.12000 Average least dimensionDirect measurement (nominal size 10 mm and greater) 8pp
Describes the counting method for determining the average least dimension of aggregate particles by the use of vernier callipers or dial gauge or a slotted gauge. (CE-012)
AS 1141.6.21996 Particle density and water absorption of coarse aggregatePycnometer method 5pp
Specifies the method for determining particle density, apparent particle density and water absorption of aggregate substantially retained on a 4.75 mm sieve by soaking in water, weighing surface dry, weighing in a pycnometer and weighing oven dry. (CE-012)
AS 1141.20.22000 Average least dimensionDirect measurement (nominal sizes 5 mm and 7 mm) 3pp
Describes the counting method for determining the average least dimension of aggregate particles by the use of a slotted gauge. (CE-012)
3pp
Determines the proportion by mass by separating particles that float in a solution of density 2 t/m3. (CE-012)
3pp
Amendment 1 5 April 1999 Describes the method for the determination of the apparent particle density of filler for asphalt. (CE-006)
AS 1141.322008 Weak particles (including clay lumps, soft and friable particles) in coarse aggregates 4pp
(CE-012)
4pp
2pp
2pp
Describes the method for the determination of the water-soluble fraction of a filler for asphalt. (CE-006)
5pp
Specifies the method for determining the aggregate crushing value by tamping a measured mass of sieved material (14 mm nominal size) in a standard cylinder, crushing with a plunger and determining the mass passing a 2.36 mm sieve. Material of other nominal sizes may be used but the result may not be comparable. (CE-012)
Determines the ratio of clay and fine silt to sand using a simple settling method suitable for use in the field. (CE-012)
2pp
Amendment 1 5 June 1999 Determines the sizes of coarse and fine aggregates and fillers for asphalt by sieving. (CE-012)
12pp
(CE-012)
Sets out a method for an approximate determination of the presence of organic materials, other than sugar, present in fine aggregate. (CE-012)
AS 1141.352007 Sugar
2pp
8pp
Sets out a qualitative method for the detection of sugar in aggregates. (CE-012)
Amendment 1 5 October 1997 Describes the procedure for the determination of the loss, on abrasion, of aggregate particles by means of the Los Angeles abrasion testing machine. (CE-012)
AS 1141.361997 Sulfur in metallurgical slag, crushed rock or other pavement materials 8pp
Determines total sulfur or acid soluble sulfate content by chemical treatment with acids. (CE-012)
3pp
Sets out the method for determining the susceptibility of slag aggregate to iron unsoundness. (CE-012)
7pp
Sets out the method for the determination of material finer than 2 mm in aggregate. (CE-012)
7pp
Sets out the method for the determination of the degradation factor of rock spalls and drill cores. The test categorizes the fines produced by self-abrasion in the presence of water. (CE-012)
11
AS 1141.411999
AS 1141.411999 Polished aggregate friction value Horizontal bed machine AS 1146.11990 Izod impact resistance (ISO 180:1982) Obsolescent AS 1157.21998 Resistance of textiles to fungal growth 9pp 6pp
Describes the procedure for determining the resistance of textiles to surface-growing fungi. (CH-020)
10pp
Sets out the method for laboratory polishing of naturally occurring or artificially produced materials which are intended to be used as, or to be a source of, pavement surfacing material. (CE-012)
Specifies the method for the determination of the Izod impact resistance of plastics materials. It is technically similar to ISO 180. (PL-010)
10pp
Sets out the method for determination of the polished aggregate friction value of test specimens prepared in accordance with AS 1141.40 or AS 1141.41 from naturally occurring or artificially produced materials which are intended for use as a pavement surfacing material. (CE-012)
9pp
Specifies the method for the determination of the Charpy impact resistance of plastics materials. It is technically similar to ISO 179. (PL-010)
AS 1157.41999 Resistance of coated fabrics and electronic boards to fungal growth 8pp
Describes procedures for determining the resistance of the textile substrate of coated fabrics to attack by cellulolytic fungi. (CH-020)
11pp
Specifies the requirements and methods of calibrating impact testing machines used to determine the Izod and Charpy resistance of plastics materials. (PL-010)
AS 1147 Electrical equipment for coal mines Insulating materials AS 1147.11989 Materials for insulating power conducting components 7pp
Specifies requirements for insulating materials which are used for the support and insulating of live parts of cable coupling devices, but excluding cables, intended for use in coal mines. Mechanical, electrical and thermal properties are specified. (EL-023)
9pp
(CE-012)
AS 1141.652008 Alkali aggregate reactivityQualitative petrological screening for potential alkalisilica reaction 6pp
(CE-012)
AS 1157.61998 Resistance of leather and wet 'blue' hides to fungal growth 5pp
Specifies the procedure to be adopted for determining the resistance of leather to surface-growing fungi. (CH-020)
AS 1145 Determination of tensile properties of plastics materials AS 1145.12001 General principles (ISO 527-1:1993)
AS 1157.71999 Resistance of papers and paper products to surface fungal growth 3pp
Describes the procedure to be adopted for determining the resistance of paper, paperboard and articles manufactured therefrom, to surface-growing fungi on a mineral salts/agar medium. (CH-020)
10pp
Specifies the general principles for determining the tensile properties plastics and plastic composites under defined conditions. This Standard is identical to and reproduced from ISO 527-1:1993. (PL-010)
AS 1145.22001 Test conditions for moulding and extrusion plastics (ISO 527-2:1993) 6pp
Specifies the test conditions for determining the tensile properties of moulding and extrusion plastics, based on the general principles given in AS 1145.1. This Standard is identical to and reproduced from ISO 527-2:1993. (PL-010)
AS 1157.101999 Resistance of dried or cured adhesives and glues to fungal growth 3pp
Defines procedures for determining the resistance of water-resistant and water-sensitive adhesives and glues to fungal growth which may have an adverse effect on appearance. (CH-020)
8pp
Tabulates minimum levels of artificial illumination in accommodation spaces and work areas. It is primarily intended for crew accommodation but may also be used as a guide for passenger accommodation areas. It does not refer to emergency illumination, glare control, or distribution of light from luminaires. Technically unchanged from 1972 edition. (ME-059)
20pp
Specifies conditions for determining the tensile properties of plastic films or sheets less than 1 mm thick, based non the general principles given in AS 1145.1. This Standard is identical to and reproduced from ISO 527-3:1995. (PL-010)
Specifies requirements and sets out recommendations for test sieves made from woven wire or perforated plate in the aperture size range 32 m to 125 mm. (CH-032)
AS/NZS 1158 Set:2007 Lighting for roads and public spaces Set 423pp AS/NZS 1158 Lighting for roads and public spaces AS/NZS 1158.0:2005 Introduction 20pp
AS 1154 Insulator and conductor fittings for overhead power lines AS 1154.12004 Performance, material, general requirements and dimensions 77pp
Provide users and manufacturers of fittings with definitions of terms, performance requirements, dimensions, test methods and acceptance criteria. (EL-010)
AS 1145.42001 Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997) 11pp
Specifies the test conditions for the determination of the tensile properties of isotropic and orthotropic fibre-reinforced plastic composites, based upon the general principles given in AS 1145.1. This Standard is identical to and reproduced from ISO 527-4:1997. (PL-010)
Amendment 1 5 August 2008 Serves as a general introduction to the AS/NZS 1158 series and provides definitions of lighting categories and technical terms essential to the understanding of other Standards in the series especially AS/NZS 1158.1.1, 1158.2, 1158.3.1 and 1158.6. (LG-002)
AS 1145.52001 Test conditions for fibre-reinforced plastic composites (ISO 527-5:1997) 9pp
Specifies the test conditions for the determination of the tensile properties of unidirectional fibre-reinforced plastic composites, based upon the general principles given in AS 1145.1. This Standard is identical to and reproduced from ISO 527-5:1997. (PL-010)
AS/NZS 1158.1.1:2005 Vehicular traffic (CategoryV) lighting Performance and design requirements 38pp
Specifies performance and design requirements for Category V lighting schemes as described in AS/NZS1158.0. Also specifies data needed to design for and assess compliance with those requirements. (LG-002)
AS 1157 Methods of testing materials for resistance to fungal growth AS 1157.11998 General principles of testing 15pp
AS/NZS 1158.1.3:1997 Vehicular traffic (Category V) lighting Guide to design, installation, operation and maintenance 115pp
Sets out guidelines for the design, installation, operation and maintenance of lighting systems for roads which require Category V lighting complying with AS/NZS 1158.1.1, i.e. traffic routes, including arterial
Describes requirements and general information on the methods of testing materials for resistance to fungal growth which are specified in other Parts of this series. (CH-020)
12
83pp
AS/NZS 1158.2:2005 Computer procedures for the calculation of light technical parameters for Category V and Category P lighting 47pp
Amendment 1 5 August 2008 Specifies the computer-based procedures for the design and evaluation of Category V and Category P lighting schemes in accordance with AS/NZS 1158.1.1 and AS/NZS 1158.3.1 respectively. Includes basic formulae for relevant light technical parameters and relevant calculation fields. Programs SAA STAN and STANSHELL for Category V straight road lighting designs provided on accompanying CD ROM. (LG-002)
AS/NZS 1167 Welding and brazingFiller metals AS/NZS 1167.1:2005 Filler metal for brazing and braze welding 8pp
Specifies requirements for brazing filler metals. It includes requirements for chemical composition and analysis, packing and marking. (WD-002)
Amendment 1 4 April 2005 Provides design values of wind actions for use in structural design. It is intended to be used in conjunction with AS/NZS 1170.0, which gives the procedure for structural design. Wind speeds and direction factors are provided for a range of probabilities of exceedance. Other factors cover the environment around the structure, the geometry of the structure and the dynamic interaction of the structure with the wind. (BD-006)
AS/NZS 1170.2 Supplement 1:2002 Wind actionsCommentary (Supplement to AS/NZS 1170.2:2002) 50pp
Provides background material to the requirements of AS/NZS 1170.2, Wind actions. Clause by clause, it gives the origins of requirements, departures from previous practice and explanations with examples to illustrate their application. (BD-006)
14pp
AS/NZS 1158.3.1:2005 Pedestrian area (Category P) lighting Performance and design requirements 46pp
Amendment 1 27 November 2008 Specifies performance and design requirements for Category P lighting schemes as described in AS/NZS 1158.0. Also specifies data needed to design for and assess compliance with those requirements. (LG-002)
Specifies requirements for ferrous and non-ferrous, fluxed or unfluxed filler metal for welding. The classification system adopted is basically in line with ANSI/AWS classification. Filler metals are given in seven groupscarbon and intermediate alloy steels, high alloy steels, cast iron, copper and copper alloys, magnesium alloys, aluminium alloys, nickel and nickel alloys. An appendix providing a guide to the application of filler metals is included (WD-002)
90pp
AS/NZS 1170 Set:2007 Structural design actions Set AS/NZS 1170 Structural design actions AS/NZS 1170.0:2002 General principles
477pp
27pp
Amendment 1 25 January 1991 Amendment 2 18 January 1993 Amendment 3 13 December 1993 Sets out requirements for establishing the minimum wind loads in structural design, and is in a limit states format. It provides a simplified procedure for the determination of wind loads on a limited range of small structures and buildings, and a detailed procedure on a wide range of structures. Windspeeds are specified for the serviceability and ultimate strength/stability limit states, and for permissible stress design. Explanatory material is given in the appendices. (BD-006)
44pp
Specifies performance and design requirements for lighting schemes for tunnels and underpasses. It also specifies the luminaire data and other design data that is needed to facilitate the lighting design and the assessment of compliance with the requirements of this Standard. (LG-002)
Amendment 1 8 January 2003 Amendment 2 28 November 2003 Amendment 4 28 April 2005 Provides the procedure for structural design. It includes design procedures, reference to design actions (other parts of the series), combinations of actions, detailing for robustness, methods of analysis and methods for confirmation of a limit states design. It also covers the use of special studies and experimental testing and, for New Zealand, criteria for selection of annual probability of exceedance. Information is given in appendices on selection of serviceability criteria. (BD-006)
AS/NZS 1170.3:2003 Snow and ice actions (ISO 12494:2001, ISO 4355:1998)
29pp
Amendment 1 2 April 2007 Provides design values of snow and ice actions for use in structural design. It is intended to be used in conjunction with AS/NZS 1170.0, which gives the procedure for structural design. Snow regions are defined and ground snow loads are provided for a range of annual probabilities of exceedance. Other factors cover the environment around the structure, the geometry of the structure and the effect of winds on snow distribution. (BD-006)
36pp
Sets out requirements for the design, construction, performance and testing of luminaires intended for use in Category V and Category P lighting schemes as per AS/NZS1158.1.1 and AS/NZS1158.3.1 respectively. (LG-002)
AS/NZS 1170.0 Supplement 1:2002 General principles -Commentary (Supplement to AS/NZS 1170.0:2002) 25pp
Amendment 1 28 November 2003 Provides background material to the requirements of AS/NZS 1170.0, General principles. Clause by clause, it gives the origins of requirements, departures from previous practice and explanations with examples to illustrate their application. (BD-006)
AS/NZS 1170.3 Supplement 1:2003 Snow and ice actionsCommentary (Supplement to AS/NZS 1170.3:2003) 65pp
Provides background material to the requirements of AS/NZS 1170.3, Snow and ice actions. Clause by clause, it gives the origins of requirements, departures from previous practice and explanations with examples to illustrate their applications. Common problems for design are also discussed. (BD-006)
AS 11601996 Bituminous emulsions for the construction and maintenance of pavements 12pp
Specifies requirements for anionic and cationic bituminous emulsions suitable for use in the construction and maintenance of pavements. (CH-025)
25pp
This Standard sets out data and procedures for determining minimum snow loads on roofs, balconies, walkways, and other building surfaces, in areas which receive significant snowfalls. It also provides guidance on the avoidance of common problems which occur mainly in alpine regions. (BD-006)
AS/NZS 1170.1 Supplement 1:2002 Permanent, imposed and other actions Commentary (Supplement to AS/NZS 1170.1:2002) 22pp
Provides background material to the requirements of AS/NZS 1170.1. Clause by clause, it gives the origins of requirements, departures from previous practice and explanations with examples to illustrate their application. (BD-006)
AS 1170.3 Supplement 11990 Snow loadsCommentary (Supplement to AS 1170.31990) 20pp Available Superseded
The commentary provides guidance and background material to the requirements of AS 1170.3, Snow loads. It also provides worked examples. (BD-006)
22pp
Amendment 1 21 December 1992 Amendment 2 5 March 1996 Specifies the technical requirements for cold-formed steel hollow sections for structural purposes, for the six grades of steel that are suitable for welding. Grade C200 and all hotformed grades have been deleted. It includes a new coldformed grade C450 and grades with guaranteed impact performance at 0C, namely C250L0 and C450L0. Tensile strengths of grades C250 and C350 are reduced to reflect the properties obtained on cold-formed sections. (BD-023)
AS 1170.11989 Dead and live loads and load combinations 24pp Available Superseded
Amendment 1 18 January 1993 Sets out requirements for establishing the minimum dead and live loads in the structural design of buildings and structures. This edition is presented in limit states format. A new section on load combinations has now been included. (BD-006)
45pp
Sets out data and procedures for determining earthquake loads on structures and their components, and also minimum detailing requirements for structures. Domestic structures are covered in an Appendix. (BD-006)
54pp
Amendment 1 17 October 1994 Sets out data and procedures for determining minimum earthquake loads on structures and their components, and also minimum detailing requirements for
13
AS EN 1174.32002 Guide to the methods for validation of microbiological techniques (EN 1174-3:1996) 13pp
Provides guidance by describing approaches which may be taken when validating techniques for the estimation of the population of viable micro-organisms on a medical device or on a component, raw material or package. (HE-023)
22pp
AS 11711998 Non-destructive testingMagnetic particle testing of ferromagnetic products, components and structures 34pp
Specifies requirements for magnetic particle testing for the detection of surface and near-surface discontinuities in all types of ferromagnetic products, components and structures. Also specifies requirements for magnetic particle testing process control. Appendices give information on test methods for determining flux density and magnetizing current levels and the preparation and use of standard test pieces. (MT-007)
Defines almost 300 terms used in connection with the specification, manufacture and inspection of hose. Many of the terms are general but have been included to make for convenience and completeness. (RU-001)
AS 1180 Methods of test for hose made from elastomeric materials AS 1180 (Pt 1 to 3, 4A to 4B, 6)1972 First group: Methods 1, 2, 3 4A, 4B, 6 30pp
Corrigendum 1 1 January 1977 Covers general methods for determining the dimensions and other properties of hose made from elastomeric materials. (RU-001)
AS 1180.10B1982 Determination of combustion propagation characteristics of a horizontally oriented specimen of hose using surface ignition 4pp
Describes method for determining the combustion propagation characteristics of hose made from elastomeric materials. (RU-001)
AS 1180 (Pt 7A to 7D, 7F to 7G, 7J, 8A to 8B)1972 Second Group: Methods 7A, 7B, 7C, 7D, 7F, 7G, 7J, 8A, 8B 37pp
Corrigendum 1 1 January 1977 (RU-001)
Specifies requirements for toilet pans for use with flushing cistern and other devices complying with AS 1172.2. (WS-003)
AS 1180.11972 Dimensions
(RU-001)
AS 1172.21999 Cisterns
22pp
Amendment 1 20 August 2002 Amendment 2 29 August 2005 Specifies requirements for flushing cisterns which are intended for use with pans of all types. (WS-003)
3pp
Describes destructive method for determining the resistance to ignition of hose lining. (RU-001)
AS 1173 Recommended methods of measurement on receivers for television broadcast transmissions AS 1173.11979 General considerationsElectrical measurements other than those at audiofrequencies (IEC 60107-1 Ed. 2.0 (1977)) 116pp
Specifies uniform conditions for measurement and measurement methods for the electrical, acoustic and optical properties for monochrome and colour receivers for broadcast television transmissions, in order to permit assessment of the receiver performance by comparative methods. It does not specify limiting values of performance levels. It is technically identical with IEC 107-1. (CT-002)
8pp
AS 1173.21986 Electrical and acoustic measurements at audio-frequencies (IEC 60107-2 Ed. 1.0 (1980)) 22pp
Standardizes conditions and methods of measurement of the audio section of a TV receiver, to allow comparison of various receivers. Limiting values of various quantities are not specified. (CT-002)
Specifies methods for the hydrostatic testing of rubber and plastics hoses and hose assemblies, including methods for the determination of dimensional stability. This Standard is based on and has been reproduced from ISO 1402:1994. An appendix proposes variations to ISO 1402 for application in Australia. (RU-001)
AS EN 1174 Sterilization of medical devicesEstimation of the population of micro-organisms on product AS EN 1174.12002 Requirements (EN 1174-1:1996)
AS 11811982 Method of measurement of civil engineering works and associated building works 50pp
Sets out general principles and rules for preparing schedules of quantities. Building trades are included, so that building works forming part of a civil engineering contract can be covered. The Standard deals in detail with site investigation, site clearance and demolition, excavation and filling, dredging, piling and caissons, roads and paving, railway track work, concrete, brickwork and blockwork, structural steel and metalwork, carpentry, roofing and wall cladding, sheetmetal work and plumbing, water mains, sewerage and drainage, electrical conduits, engineering services, plastering, paving and tiling, glazing and painting. (CE-014)
11pp
Specifies requirements for the estimation of the population of viable micro-organisms on a medical device or on a component, raw material or package. (HE-023)
26pp
Provides guidance on the implementation of requirements for the estimation of the population of viable
14
7pp
Presents terms and definitions of selected concepts relevant to the field of information processing and identifies relationships between the entries. It deals in particular with input and output of data, transfer and conversion methods and also with search techniques. This Standard is identical with and has been reproduced from ISO 2382-6. (IT-015)
identifies relationships between the entries. It defines concepts relating to analog and hybrid arithmetic units, function generators, converters, and modes of operation of such components. This Standard is identical with and has been reproduced from ISO 238219:1989. (IT-015)
7pp
12pp
Presents terms and definitions of selected concepts relevant to the field of information processing and identifies relationships between the entries. It defines concepts relating to programming context and some programming languages, and to the preparation, execution, debugging and verification of programs. This Standard is identical with and has been reproduced from ISO/IEC 2382-7. (IT-015)
Presents terms and definitions of selected concepts relevant to the field of information processing and identifies relationships between the entries. It defines concepts relating to a system life cycle, from the requirements for analysis to the implementation, including system design and quality assurance. This Standard is identical with and has been reproduced from ISO/IEC 2382-20. (IT-015)
AS 1189.211987 Interfaces between process computers systems and technical processes (ISO 2382-21:1985) 9pp
Defines terms and definitions of selected concepts relevant to the field of data processing and identifies relationships between the entries. (IT-015)
9pp
Presents terms and definitions of selected concepts relevant to the field of information processing and identifies relationships between the entries. It deals in particular with auditing, monitoring and protection of a data processing system and also detection and handling of errors. This Standard is identical with and has been reproduced from ISO 2382-8. (IT-015)
10pp
Describes terms and definitions of selected concepts relevant to the field of information processing and identifies relationships between the entries. (IT-015)
245pp
12pp
Provides a permuted index of terms defined in parts 1 to 16 and 18 to 22 of AS 1189. This Standard is identical with and has been reproduced from ISO/IEC/TR 12382:1989. (IT-015)
Defines terms and definitions of selected concepts relevant to the field of data processing and identifies relationships between the entries. (IT-015)
11pp
Defines different types of local area networks, concepts relating to devices, to transmissions and the problems that can appear, and also protocols that govern exchanges. This Standard is identical with and reproduced from ISO/IEC 2382-25:1992. (IT-015)
12pp
7pp
Presents terms and definitions of selected concepts relevant to the field of data processing and identifies relationships between the entries. It deals with the main area of data processing, including the principal processes and types of equipment used, the representation, organization and presentation of data, the programming and operation of computers, peripheral equipment and data communication as well as particular applications. This Standard is identical with and has been reproduced from ISO 2382-1. (IT-015)
Describes major basic concepts concerning the operating techniques and facilities in use in a data processing system. (IT-015)
AS 11912002 AcousticsMethod for laboratory measurement of airborne sound transmission insulation of building elements (ISO 140-1:1997, ISO 140-3:1995) 16pp
Provides a method for the measurement of airborne sound reduction index to building partitions such as walls, floor/ceiling assemblies, doors, windows and other space dividing elements. (AV-004)
10pp
Presents terms and definitions of selected concepts relevant to the field of information processing and identifies relationships between the entries. It defines processing and arithmetic units and also registers and converters. This Standard is identical with and has been reproduced from ISO 2382-11. (IT-015)
21pp
Defines terms and definitions of selected concepts relevant to the field of data processing and identifies relationships between the entries. (IT-015)
24pp
AS 11911985 AcousticsMethod for laboratory measurement of airborne sound transmission loss of building partitions (ISO 140-1, ISO 140-3) 16pp Available Superseded
Amendment 1 5 January 1987 Sets out the method for the measurement of the airborne sound transmission loss of building partitions such as walls, floor/ceiling assemblies, doors, windows, and other spacedivided elements. It prescribes parameters for the room used for measurement, the range of frequencies to be measured, the manner in which sound fields are to be generated and the characteristics of the filters used. (AV-004)
7pp
Provides definitions that are rigorous, uncomplicated and which can be understood by all concerned. The scope of each concept defined has been chosen to provide a definition that is suitable for general application. In those circumstances where a restricted application is concerned, the definition may need to be more specific. This Standard is identical with and has been reproduced from ISO 2382-3. (IT-015)
Presents terms and definitions of selected concepts relevant to the field of information processing and identifies relationships between the entries. It defines the data media, the storage devices and also the magnetic tape and the printers. This Standard is identical with and has been reproduced from ISO 2382-12. (IT-015)
11pp
Describes terms and definitions of selected concepts relevant to the field of data processing and identifies relationships between the entries. (IT-015)
8pp
9pp
Presents terms and definitions of selected concepts relevant to the field of information processing and identifies relationships between the entries. This Standard is identical with and has been reproduced from ISO 2382-4. (IT-015)
Defines terms and definitions of selected concepts relevant to the field of data processing and identifies relationships between the entries. (IT-015)
AS/NZS 1194 Winding wires AS/NZS 1194.1:1996 Enamelled round copper winding wires 33pp
Amendment 1 5 January 1997 Specifies dimensions and material requirements for conductor and enamel covering of round copper winding wires intended to be used for windings of electrical equipment. (EL-003)
7pp
9pp
Presents terms and definitions of selected concepts relevant to the field of information processing and identifies relationships between the entries. It defines concepts relating to certain forms of data representation, to representation systems, and to notations which provide for some forms of representation. This Standard is identical with and has been reproduced from ISO 2382-5. (IT-015)
Presents terms and definitions of selected concepts relevant to the field of information processing and identifies relationships between the entries. It is identical with and has been reproduced from ISO 238218:1987. (IT-015)
5pp
Presents terms and definitions of selected concepts relevant to the field of information processing and
15
AS/NZS 1194.3:1996
winding wires intended to be used for windings of electrical equipment. (EL-003) Specifies LQ sampling plans and procedures for inspection by attributes compatible with ISO 2859-1 that can be used when the switching rules given in ISO 2859-1 are not applied, when lots are of an isolated nature. This Standard is identical with and reproduced from ISO 2859-2:1985. (QR-008) 1100, Part 101. Applicable to sequences of microfilmed multiple frame drawings, reduction ratios and frame overlap. This Standard is identical with and has been reproduced from ISO 3272-4:1994. (MS-004)
322pp
16pp
Specifies general attribute skip-lot sampling procedures for reducing the inspection effort on products submitted by those suppliers who have demonstrated their ability to control, in an effective manner, all facets of quality and who consistently produce lots which meet requirements. This Standard is identical with and reproduced from ISO 2859-3:1991. (QR-008)
41pp
Specifies test methods for round and rectangular, copper and aluminium winding wires in Standards AS/NZS 1194 Parts 1 to 4, where relevant. (EL-003)
Amendment 1 February 1998 Amendment 2 5 September 1998 Amendment 3 16 April 2002 Specifies requirements for the materials, design, manufacture, testing, inspection certification and despatch of pressure vessels for pressures up to 21 MPa and temperatures within the limits for the various materials and components. Welded, forged, brazed, and cast constructions in ferrous and non-ferrous metals are covered. Requirements for nonmetallic vessels and metallic vessels with non-metallic linings are given. Detailed requirements for manufacture, heat treatment, welding and testing are covered in AS 4458, AS 3992 and AS 4037. The specific design requirements are based on a simplified engineering approach and are intended to be the standard methods of design, but provision is also made for other methods to be used provided that the validity of the design is satisfactorily established. (ME-001)
34pp
8pp
Sets out basic requirements and good practice for the design, materials, manufacture, examination,testing, installation, conformity assessment, commissioning, operation, inspection, maintenance, repair, alteration and disposal of pressure equipment (boilers, pressure vessels and pressure piping) but excluding gas cylinders. Includes detailed requirements for various pressure equipment by direct reference to a range of Australian, New Zealand and other Standards. (ME-001)
AS 1210 Supplement 11990 Unfired Pressure VesselsAdvanced design and construction (Supplement to AS 1210 1997) 36pp
Amendment 1 5 September 1995 Amendment 2 5 July 1997 Specifies requirements for design and construction of pressure vessels in which material design strengths higher than those specified in AS 1210 are permitted. It applies only to static vessels, and specifies only those requirements which differ from or are additional to the requirements for Class 1 vessels in AS 1210. Two new classes (2HA and 2HB) of vessels are introduced. (ME-001)
Corrigendum 1 1 February 1976 Classifies three grades of sheet according to quality and two classes according to dimensional stability, for mechanical, electrical and chemical applications, and of minimum thickness 2.4 mm. Finish and physical and electrical requirements are specified, and tests for heat resistance and dimensional stability are in appendices. (PL-029)
29pp
Sets out the Australian and New Zealand requirements to which pressure equipment (boilers, pressure vessels and pressure piping) is to be designed, manufactured, tested, inspected, supplied, installed, commissioned, operated, maintained, repaired, altered and disposed of. Specifies requirements which are common to Australian and New Zealand pressure equipment Standards. Appendices include pressure equipment covered by this Standard, enquiries, materials, a list of Australian and New Zealand regulatory authorities, definitions, the basis of design strength and New Zealand loading requirements. (ME-001)
AS 1210 Supplement 21999 Pressure vesselsCold-stretched austenitic stainless steel vessels (Supplement to AS 12101997) 14pp
Specifies requirements for pressure vessels designed and fabricated from austenitic stainless steel, cold-stretched to enhance proof strength and hence generally permit higher design strengths than those specified in AS 1210 and Supplement 1. Two additional classes of vessel identified as Class 1S and Class 2SA are introduced. (ME-001)
AS 12141983 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) (ISO 1459, ISO 1460, ISO 1461) 8pp
Specifies requirements for the mass, quality, and testing of hot-dip galvanized coating on steel bolts, screws, nuts and other fasteners having ISO metric coarse threads, in the nominal size range M8 to M36 inclusive. Guidance is also given for oversize tapping allowances for fasteners, with metric coarse threads up to and including M64 diameter. (ME-029)
4pp
AS 1199 Sampling procedures for inspection by attributes AS 1199.02003 Introduction to the ISO 2859 attribute sampling system (ISO 2859-0:1995) 56pp
Specifies the terms used in acceptance sampling, describe the various schemes and plans, give practical advice on sampling inspection and discuss some of the theoretical aspects. This Standard is identical with and reproduced from ISO 2859.0:1995. (QR-008)
For microfilming technical drawing and other drawing office documents, this Standard specifies reduction and enlargement ratios, sizes of enlargement and resulting image sizes for recording on 35 mm unperforated microfilm. This Standard is identical with and has been reproduced from ISO 3272-1:1983 (Confirmed 1993). (MS-004)
38pp
6pp
Specifies procedures for maintaining and checking the quality and reproducibility of 35 mm silver gelatin type microfilm in black and white, applicable to first, second and distribution silver copies, for microfilming of drawing office documents. This Standard is identical with and has been reproduced from ISO 32722:1994. (MS-004)
Amendment 1 6 November 2006 Sets out details of the design of labels for the classes, divisions and subsidiary risks of dangerous goods as given in the 14th edition of the UN Recommendations on the Transport of Dangerous Goods and the seventh edition of the Australian Code for the Transport of Dangerous Goods (ADG Code). A large replica of each label is provided as a model for the production of correct labels. This information is essentially the same as that which will be published in the seventh edition of the ADG Code. (CH-009)
54pp
AS 1199.12003 Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999) 87pp
Specifies an acceptance sampling system for inspection by attributes. It is indexed in terms of the acceptance quality limit (AQL). This Standard is identical with and reproduced from ISO 2859-1:1999. (QR-008)
4pp
Specifies requirements for microfilm carriers such as aperture cards and the mounting of 35 mm microfilm of technical drawings or associated documents in the cards to reproduce 35 mm microfilm images from these cards. This Standard is identical with and has been reproduced from ISO 3272-3:1975 (Confirmed 1993). (MS-004)
Specifies safety requirements for the design, construction, operation and maintenance of power stamping presses and brake presses. It incorporates the details for the safeguarding of power presses, die design and die setting, and provides appropriate recommendations for the operation, inspection and maintenance of presses, and the training and supervision of operators. (SF-008)
30pp
AS 1199.22003 Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (ISO 2859-2:1985) 21pp
AS 1203.41996 Microfilming of drawings of special and exceptional elongated sizes (ISO 3272-4:1994) 4pp
Establishes general principles for microfilming drawings of special exceptional sizes as specified in AS
Amendment 1 23 January 2003 Specifies requirements for design, construction and performance of fixed and swing arm type fire hose reels for use by one operator. (FP-007)
18pp
16
diameters from 16 mm to 36 mm inclusive, mainly intended for use in steel structures. (ME-029)
7pp
AS 1222 Steel conductors and staysBare overhead AS 1222.11992 Galvanized (SC/GZ) (IEC 60888 Ed. 1.0 (Bilingual 1987))
Specifies the nominal dimensions for plain washers product grades A and C for use with metric generalpurpose bolts, screws and nuts with nominal thread diameter from 1 mm to 150 mm inclusive. This Standard is identical with and has been reproduced from ISO 887:2000. (ME-029)
AS/NZS 1254:2002 PVC pipes and fittings for storm and surface water applications 24pp
Specifies requirements for PVC pipes and fittings for underground disposal of storm or surface water. The Standard includes requirements for both plain and structured wall pipes and fittings. (PL-021)
12pp
Specifies requirements, tests, sizes of zinc-coated steel wires and method of construction of stranded conductors used for power transmission purposes. (EL-010)
6pp
12pp
Specifies requirements, tests, sizes of aluminium-clad steel wires and method of construction of stranded conductors used for power transmission purposes. (EL-010)
Specifies the tolerances for the principle fasteners of plain washers of product grades A and C for use with metric bolts, screws, studs and nuts with nominal thread diameters from 1 mm to 150 mm inclusive. This Standard is identical with and has been reproduced from ISO 4759-3:2000. (ME-029)
AS 12571973 Bore sizes, test pressures and tolerances on lengths of elastomeric hose 4pp
Amendment 1 1 June 1979 Provides for bore sizes from 3.2 to 31.5 mm with tolerances, for tolerances on cut lengths, and for ratios of testing and bursting pressures to design pressures for two types according to service. (RU-001)
7pp
AS 1259 AcousticsSound level meters AS 1259.11990 Non-integrating (IEC 60651 Ed. 1.0 (Bilingual 1979)) Available Superseded
Applies to zinc metal in ingot form made from ore or other material by a process of distillation or by electrolysis. It provides for three grades, viz. Zn 99.99 (Special High Grade), Zn 99.95 (High Grade) and Zn 98.5 (Prime Western). (MT-004)
23pp
268pp
Amendment 1 5 May 2008 Specifies requirements for materials, design, construction, inspection and testing boilers as defined in AS/NZS 1200. It specifically applies to the design and construction of boilers, including superheaters, reheaters and economizers. Guidance is also provided regarding locomotive and other heritage boilers, and the design of blowdown vessels. (ME-001)
Provides for four types of meter, viz. Types 0 and 1 for laboratory and precision use, Type 2 for general field applications, and Type 3 for field noise survey applications, with one or more frequency-weighting characteristics A, B and C and one or more timeweighting characteristics S, F, I and P. Specifies the directional frequency-weighting and amplifier, timeweighting, detector and indicator characteristics, and sensitivity to various environments, and includes electrical and acoustical tests. Is technically equivalent to IEC 651 and includes an annex showing deviations from IEC 651. (AV-002)
22pp
AS 1259.21990 IntegratingAveraging (IEC 60804 Ed. 1.0 (Bilingual 1985)) Available Superseded
49pp
Specifies requirements for materials and finish of laundry troughs and tubs. Only critical dimensions are specified. In New Zealand substitute tub for trough. (WS-003)
AS 12472004 Metallic coatingsRating of test specimens and manufactured articles subject to corrosion tests (ISO 10289:1999) 22pp
Amendment 1 2 December 2004 Specifies a method of evaluating the condition of decorative and protective metallic and inorganic coated panels or articles which have been exposed to corrosive environments for test or for other purposes. Identical with and reproduced from ISO 10289:1999. (MT-009)
Describes instruments for the measurement of frequency weighted and time averaged sound pressure levels. Optionally, sound exposure levels may be measured. Specifies additional characteristics to those in AS 1259.1 which are necessary to measure the equivalent continuous sound pressure level (Leq) of steady, intermittent, fluctuating and impulsive sounds. Identical with and reproduced from IEC 804. (AV-002)
AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application 49pp
States requirements for PVC pipes and fittings for sewer, drain, waste and vent applications above-ground or below ground and intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. (PL-021)
AS/NZS 1249:2003 Children's nightwear and limited daywear having reduced fire hazard 36pp
Specifies the design performance and labelling requirements of children's sleepwear and limited daywear and the labelling of associated paper patterns. (CS-086)
AS/NZS 1249:1999 Children's nightwear and limited daywear having reduced fire hazard 33pp Available Superseded
Specifies requirements for fabrics, trims and labelling of children's nightwear and some daywear garments which are commonly worn both day and night, in Sizes 00 to 14 in four categories. Also covers labelling of envelopes containing paper patterns. (CS-086)
AS/NZS 1268:1996 Equipment for checking pressure and inflation of tyres 15pp
Specifies minimum requirements for tyre pressure gauging equipment when used to measure, inflate, control or adjust the pressure of tyres used on road vehicles. (ME-056)
AS/NZS 1269 Set:2005 Occupational Noise Management Set AS/NZS 1269 Occupational noise management AS/NZS 1269.0:2005 Overview and general requirements 15pp
Provides an overview and general requirements for the occupational noise management series of Standards. (AV-003)
12pp
AS 12491990 Children's nightclothes having reduced fire hazard 18pp Available Superseded
Amendment 1 16 April 1992 Specifies requirements for fabrics, trims, and labelling of children's nightclothes in sizes from 0 to 14, in three categories, viz. garments made from fabric of low hazard type, garments designed to reduce fire hazard, and garments which do not comply with these categories. Also covers labelling of envelopes containing paper patterns. (CS-086)
Applies to ferrous and non-ferrous cotter pins in diameters from 1 to 13 mm and lengths from 4 to 125 mm, for general engineering purposes. Shape, dimensions, properties and finish are specified, and recommendations on gauging are included. Guidance on the use of the split cotter pins with ISO metric bolts, screws and clevis pins is given in an appendix, and requirements for humpback split cotter pins used as locking devices for insulated and conductor fittings specified in AS 1154.2, are also given. For inch series see AS B175. (ME-029)
10pp
AS 1237 Plain washers for metric bolts, screws and nuts for general purposes
AS/NZS 1252:1996 High strength steel bolts with associated nuts and washers for structural engineering (ISO 4775:1984, ISO 7411:1984, ISO 7415:1984) 23pp
Specifies requirements for high strength steel bolts of property class 8.8 and steel nuts of property class 8 with ISO metric coarse pitch series threads and associated washers in
Provides an overview to the AS/NZS 1269 series of Standards on occupational noise management. Includes guidance on an integrated approach to establishing, implementing evaluating an occupational noise management program. (AV-003)
AS/NZS 1269.1:2005 Measurement and assessment of noise immission and exposure 42pp
Amendment 1 16 September 2005
17
AS/NZS 1269.1:1998
Sets out requirements for, and provides guidance on, the types of noise assessments which may be necessary and suitable noise measuring instruments to carry them out. The procedures for noise measurement are also included. (AV-003)
AS 12731991 Unplasticized PVC (UPVC) downpipe and fittings for rainwater 7pp
Specifies requirements for rectangular and circular UPVC downpipes and fittings used for rainwater disposal. (WS-020)
AS/NZS 1269.1:1998 Measurement and assessment of noise immission and exposure 38pp Available Superseded
Describes the types of noise assessment which may be required in an occupational noise management program and the procedures and measuring instrumentation required to perform these assessments. (AV-003)
17pp
54pp
Sets outs requirements and guidance on the management of noise control in occupational settings and applies to all types of workplaces and to all types of sounds. (AV-003)
48pp
Amendment 1 4 August 1986 Specifies requirements for single start parallel coarse pitch series metric screw threads, mainly intended for threaded fasteners. It covers screw threads from 1.6 mm diameter up to and including 64 mm diameter, in tolerance classes 6e, 6f, 6g and 8g, for external threads; and 6H and 6G for internal threads. Information is given on symbols for screw thread parameters, tolerances, deviations, thread classes, designation and verification. Appendices, giving notes on the production of screw threads and a comparison of symbols used in this Standard and the 1972 edition, are included. It should be particularly noted that in this edition, the thread roots of external threads (root curvature and associated limits and tolerances), are specified in a manner that is fundamentally different from the 1972 edition. (ME-028)
27pp
Specifies requirements for the safety performance and interchangeability of sockets rated 500V, 125A a.c. and associated components and for plug-in meters. (EL-011)
AS 1284.10.22006 Data exchange for meter reading, tariff and load controlDirect local data exchange via hand-held unit (HHU)ANSI Standard interface 8pp
Describes the ANSI Standard Type 2 optical communication interface. (EL-011)
Provides guidance on the management of noise control in occupational settings which are applicable to all types of workplaces, large or small, and to all types of noise. It provides procedures for noise control in existing workplaces. It also provides technical information on basic noise control techniques applicable to both new and existing workplaces. (AV-003)
AS/NZS 1276 AcousticsRating of sound insulation in buildings and of building elements AS/NZS 1276.1:1999 Airborne sound insulation (ISO 717-1:1996) Available Superseded
19pp
27pp
Specifies administrative responsibilities associated with a hearing protector program; the selection, use and maintenance of various types of hearing protectors; and training and motivation in regard to hearing protector programs. (AV-003)
Provides a method whereby the frequency-dependent values of airborne sound insulation of building elements and in buildings can be converted into a single number characterizing the acoustical performance. This Standard is identical with and has been reproduced from ISO 717-1:1996. (AV-004)
23pp
Provides guidance on the administritive responsibilities associated with a hearing protector program, encourages the use of effective criteria in the selection, use and maintenance of various types of hearing protectors and gives information on training and motivation programs in hearing protection. (AV-003)
AS 12761979 Methods for determination of sound transmission class and noise isolation class of building partitions (ASTM E413) 12pp Available Superseded
Describes methods for determining four indices for rating the properties of partitions, including walls and floorceiling assemblies, used to divide spaces in domestic and commercial buildings in reducing the transmission of airborne sound; the four indices are sound transmission class, field sound transmission class, noise isolation class, and normalized noise isolation class. (AV-004)
21pp
Provides requirements for an in-service compliance testing regime for electricity meters. (EL-011)
AS 1287 Methods for the determination of dimensional change in fabrics AS 1287.21972 Relaxation in steam 7pp
47pp
Amendment 1 16 September 2005 Sets out procedures and requirements for air conduction pure tone audiometry without masking that are applicable to individuals whose hearing sensitivity might be adversely affected by occupational noise exposure or ototoxic agents. (AV-003)
Describes a method in which specimens of woven or knitted fabrics, and non-woven materials where appropriate, are exposed to dry saturated steam at atmospheric pressure and the dimensional changes measured. An appendix describes the steaming apparatus. (TX-020)
36pp
Provides requirements and procedures for conducting pure tone and conduction threshold audiometry used to monitor the hearing of individuals exposed to noise at work. (AV-003)
AS 1288 Set2006 Glass in buildings Set AS 1288 PLUS (CD) Set2006 Glass in buildings PLUS CD Set 128pp
30pp
Specifies requirements for the design, material and performance of conventional hearing protectors. Also provides guidance on the general requirements for specialist hearing protectors and procedures for the physical and acoustic testing of such devices. (AV-003)
8pp
Specifies requirements for grades of copper supplied as refined shapes in the form of billets, cakes (vertically or continuously cast) and cathodes. Appendices provide information on related designations and the relationship between resistivity and conductivity. (MT-002)
AS 12712003 Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels 51pp
Amendment 1 15 July 2004 Specifies requirements for the design, construction and testing of safety valves, other valves, liquid relief valves, liquid level gauges, blowdown valves and other fittings for use on boilers and unfired pressure vessels and their associated piping. (ME-001)
AS 1288 Supplement 12006 Glass in buildingsSelection and installation (Supplement to AS 12882006) 204pp
Provides users of AS 12882006 with tables for minimum glass thicknesses calculated for stress and deflection limit state wind pressures. (BD-007)
AS 12721974 Unsintered PTFE tape for thread sealing applications (BS 4375:1968) 9pp
Applies to tape used for thread sealing for use at temperatures up to 250C, but which may also be used for general engineering applications.
18
AS 1289 Methods of testing soils for engineering purposes AS 1289.02000 General requirements and list of methods 10pp
Gives the following information: (a) A list of methods in the AS 1289 series. (b) Related documents. (c) Definitions. (d) Apparatus used in a number of methods in the series and the Standards with which that apparatus have to comply. (e) Soil groups for use in a number of methods. (CE-009)
AS 1289.3.5.22002 Soil classification testsDetermination of the soil particle density of combined soil fractionsVacuum pycnometer method 4pp
Sets out a method for determining the soil particle density of combined coarse, medium and fine or medium and fine fractions of a soil, using a vacuum pycnometer. (CE-009)
AS 1289.2.1.62005 Soil moisture content tests Determination of the moisture content of a soilHotplate drying method 3pp
Sets out the method for the determination of the moisture content of a soil as a percentage of its dry mass, using a hotplate to dry the sample. (CE-009)
AS 1289.1.12001 Sampling and preparation of soils Preparation of disturbed soil samples for testing 6pp
Amendment 1 Amendment 2 1 November 2002 21 October 2008 (CE-009)
AS 1289.2.2.11998 Soil moisture content tests Determination of the total suction of a soilStandard method 4pp
Sets out a method for the laboratory determination of the total suction of a soil (see AS 2870) by measurement of the dewpoint temperature of a thermocouple in a small air space in equilibrium with the soil. (CE-009)
AS 1289.3.6.11995 Soil classification testsDetermination of the particle size distribution of a soil Standard method of analysis by sieving 9pp
Describes the quantitative determination by sieve analysis of the particle size distribution in a soil, down to the 75 mm sieve. (CE-009)
AS 1289.2.3.11998 Soil moisture content tests Establishment of correlationSubsidiary method and the standard method 3pp
Amendment 1 5 September 1999 Provides a means of establishing a line correlation between one of the subsidiary methods of moisture content determination (AS 1289.2.1.2, 2.1.4, 2.1.5, 2.1.6) and the standard oven drying method (AS 1289.2.1.1) for a specific soil type. (CE-009)
AS 1289.3.6.21995 Soil classification testsDetermination of the particle size distribution of a soil Analysis by sieving in combination with hydrometer analysis (subsidiary method) 7pp
Describes the quantitative determination of the particle size distribution in a soil down to the 75 mm sieve, in which the material washed out during the fine sieving analysis is kept as the sample for the sedimentation analysis in AS 1289.3.6.3. (CE-009)
AS 1289.3.1.11995 Soil classification testsDetermination of the liquid limit of a soilFour point Casagrande method 6pp
Amendment 1 5 June 1998 Covers the determination of the liquid limit of an airdried or low-temperature (50C) oven-dried soil, i.e. the moisture content at which a soil passes from the plastic to the liquid state. (CE-009)
AS 1289.3.6.32003 Soil classification testsDetermination of the particle size distribution of a soil Standard method of fine analysis using a hydrometer 18pp
Sets out a method for the quantitative determination of the particle size distribution in a soil from a coarse sand size down, using a hydrometer for particles finer than the 75 mm sieve (see Note 1). The method as described is not applicable if less than 10% of the material passes the 75 mm sieve as measured in AS 1289.3.6.1. (CE-009)
AS 1289.1.4.11998 Sampling and preparation of soils Selection of sampling or test sites Random number method
5pp
Sets out the method for selecting: (a) the location of sampling or test sites for testing of soils; (b) the time at which a sample is to be taken; and (c) the tonnage or volume of material at which a sample is to be taken. (CE-009)
AS 1289.3.1.21995 Soil classification testsDetermination of the liquid limit of a soilOne point Casagrande method (subsidiary method) 4pp
Describes the determination of the liquid limit of a soil, i.e. the moisture content at which a soil passes from the plastic to the liquid state. (CE-009)
AS 1289.3.7.12002 Soil classification testsDetermination of the sand equivalent of a soil using a power-operated shaker 7pp
Sets out a procedure for the measurement of the sand equivalent of road-making aggregates for quality control purposes and provides an empirical measure of the quantity and type of the fines in the aggregate tested. (CE-009)
AS 1289.1.4.21998 Sampling and preparation of soils Selection of sampling or test sites Stratified random number method
5pp
Sets out the method for selecting the location of test or sampling sites where a test site or stockpile is divided into strata from which individual samples or subsamples are to be taken. (CE-009)
AS 1289.3.2.11995 Soil classification testsDetermination of the plastic limit of a soilStandard method 3pp
Describes the determination of the plastic limit of a soil, which is the lowest moisture content at which an air-dried or low temperature (50C) oven-dried soil is plastic. (CE-009)
AS 1289.3.8.12006 Soil classification testsDispersion Determination of Emerson class number of a soil 5pp
Sets out the method for determining the Emerson class number of a soil. Soils are divided into seven classes on the basis of their coherence in water, with one further class being distinguished by the presence of calcium-rich minerals. (CE-009)
AS 1289.2.1.12005 Soil moisture content tests Determination of the moisture content of a soilOven drying method (standard method) 3pp
Sets out the method for laboratory determination of the moisture content of a soil as a percentage of its dry mass, using a standard oven. (CE-009)
AS 1289.3.8.22008 Soil classification testsDispersion Determination of the percent dispersion of a soil 3pp
(CE-009)
AS 1289.2.1.22005 Soil moisture content tests Determination of the moisture content of a soilSand bath method (subsidiary method) 3pp
Sets out the method for the determination of the moisture content of a soil as a percentage of its dry mass, using a sand bath. (CE-009)
AS 1289.3.8.31997 Soil classification testsDispersion Determination of pinhole dispersion classification of a soil 6pp
Amendment 1 15 November 1999 Sets out the method for the determination of pinhole dispersion classification of a compacted fine-grained soil. (CE-009)
AS 1289.2.1.42005 Soil moisture content tests Determination of the moisture content of a soilMicrowave-oven drying method (subsidiary method) 3pp
Sets out the method for the determination of the moisture content of a soil as a percentage of its dry mass using a microwave oven. (CE-009)
AS 1289.3.4.12008 Soil classification testsDetermination of the linear shrinkage of a soilStandard method 3pp
(CE-009)
AS 1289.3.9.12002 Soil classification testsDetermination of the cone liquid limit of a soil 5pp
Amendment 1 29 April 2003 Sets out a method for the determination of the cone liquid limit of a soil using a cone penetrometer. (CE-009)
AS 1289.3.5.12006 Soil classification testsDetermination of the soil particle density of a soilStandard method 5pp
Sets out the method for determining soil particle density by using a density bottle for the fine fraction of a soil and by weighing in water for soil particles retained on a 2.36 mm sieve. (CE-009)
AS 1289.3.9.22006 Soil classification testsDetermination of the cone liquid limit of soilOne-point method 5pp
19
AS 1289.4.1.11997
Sets out the method for determining the cone liquid limit of a soil using a cone penetrometer and only one measurement of moisture content. (CE-009)
AS 1289.4.1.11997 Soil chemical testsDetermination of the organic matter content of a soilNormal method 5pp
Describes the determination of the percentage by mass of organic matter present in a soil. (CE-009)
AS 1289.5.4.12007 Soil compaction and density tests Compaction control testDry density ratio, moisture variation and moisture ratio 6pp
Sets out the method for determining the dry density ratio, moisture variation from optimum moisture content and moisture ratio of a soil at a test site. Applies to material that contains not more than 20% of material, on a wet basis, retained on the 37.5 mm sieve. (CE-009)
AS 1289.5.8.51998 Soils compaction and density tests Nuclear surface moisture-density gaugesDensity of a Type A or Type C standard density block 8pp
Sets out the method for determination of the density of a Type A or Type C standard density block to be used in the calibration of nuclear surface moisture-density gauges in accordance with AS 1289.5.8.4. (CE-009)
AS 1289.4.2.11997 Soil chemical testsDetermination of the sulfate content of a natural soil and the sulfate content of the groundwater Normal method 5pp
Covers the determination of the water-soluble sulfate content of natural soil and the sulfate content of the groundwater. (CE-009)
AS 1289.5.4.22007 Soil compaction and density tests Compaction control testAssignment of maximum dry density and optimum moisture content values 3pp
Sets out the method for assigning maximum dry density and optimum moisture content values. Applies only to very uniform materials and, therefore, usually is confined to manufactured materials such as crushed rocks that have been produced under controlled conditions. (CE-009)
AS 1289.5.8.61998 Soil compaction and density tests Nuclear surface moisture-density gaugesAssigned density of a Type B standard density block 4pp
Sets out a method for the determination of the assigned density of a Type B standard density block for use in the calibration of nuclear surface moisturedensity gauges in accordance with AS 1289.5.8.4. (CE-009)
AS 1289.4.4.11997 Soil chemical testsDetermination of the electrical resistivity of a soilMethod for sands and granular materials 4pp
Sets out a procedure for the measurement of electrical resistivity of sands and granular materials. (CE-009)
AS 1289.5.4.32006 Soil compaction and density tests Compaction control testDry density ratio and moisture ratio using statistical selection of reference values 7pp
Sets out the method for statistically controlling maximum dry density and optimum moisture content values used for the determination of dry density ratio and moisture ratio. (CE-009)
AS 1289.5.8.71998 Soil compaction and density tests Nuclear surface moisture-density gaugesWater content of a standard moisture block using hydrogen content of components 8pp
Sets out the method for the construction of and assignment of water content using the hydrogen content of the components, to a standard moisture block for use in the calibration of nuclear surface moisturedensity gauges in accordance with AS 1289.5.8.4. (CE-009)
AS 1289.5.1.12003 Soil compaction and density tests Determination of the dry density/moisture content relation of a soil using standard compactive effort 9pp
Sets out a method for the determination of the relationship between the moisture content and the dry density of a soil, when compacted, using standard compactive effort (596 kJ/m[3]). Compaction is conducted over a range of moisture contents to establish the maximum mass of dry soil per unit volume achievable for this compactive effort and its corresponding moisture content. (CE-009)
AS 1289.5.5.11998 Soil compaction and density tests Determination of the minimum and maximum dry density of a cohesionless materialStandard method 4pp
Covers the determination of the minimum and maximum dry density of a cohesionless material, using loose pouring to obtain the minimum dry density and vibratory compaction to obtain the maximum dry density. (CE-009)
AS 1289.5.8.81998 Soil compaction and density tests Nuclear surface moisture-density gaugesWater content of a standard moisture block using proportion of water 4pp
Sets out the method for the determination of the assigned water content of a standard moisture block for use in the calibration of nuclear surface moisturedensity gauges in accordance with AS 1289.5.8.4. (CE-009)
AS 1289.5.2.12003 Soil compaction and density tests Determination of the dry density/moisture content relation of a soil using modified compactive effort 9pp
Sets out a method for the determination of the relationship between the moisture content and the dry density of a soil, when compacted, using modified compactive effort (2703 kJ/m[3]). Compaction is conducted over a range of moisture contents to establish the maximum mass of dry soil per unit volume achievable for this compactive effort, and its corresponding moisture content. (CE-009)
AS 1289.5.6.11998 Soil compaction and density tests Compaction control testDensity index method for a cohesionless material 3pp
Sets out a procedure for calculating the density index of a cohesionless material using the field dry density and laboratory minimum and maximum dry densities of the same material. (CE-009)
AS 1289.5.8.91998 Soil compaction and density tests Nuclear surface moisture-density gaugesWater content of a standard moisture block using comparison against primary blocks 6pp
Sets out the method for the determination of the assigned water content, by comparison against a set of primary moisture blocks of a standard moisture block, to be used for the calibration of the moisture mode of nuclear surface moisture-density gauges in accordance with AS 1289.5.8.4. (CE-009)
AS 1289.5.7.12006 Soil compaction and density tests Compaction control testHilf density ratio and Hilf moisture variation (rapid method) 8pp
Sets out a rapid method for determining compaction control parameters for soils. Also involves relating converted wet density (CWD) of the laboratorycompacted soil to added moisture (Z) without the need to determine moisture content. (CE-009)
AS 1289.5.3.12004 Soil compaction and density tests Determination of the field density of a soilSand replacement method using a sand-cone pouring apparatus 8pp
Sets out the procedure for determining the field density of fine-grained and medium-grained soils (as defined in AS 1289.0) by the sand replacement method using a sand-cone pouring apparatus. (CE-009)
AS 1289.6.1.11998 Soil strength and consolidation tests Determination of the California Bearing Ratio of a soilStandard laboratory method for a remoulded specimen 13pp
Sets out the procedure for the determination of the California Bearing Ratio (CBR) of a soil when compacted and tested in the laboratory. (CE-009)
AS 1289.5.8.12007 Soil compaction and density tests Determination of field density and field moisture content of a soil using a nuclear surface moistureDensity gaugeDirect transmission mode 18pp
Sets out the method for determining the field density of a soil using a nuclear surface moisture-density gauge in the direct transmission mode of operation. Also describes the method for determining the field moisture content of a soil using the same device, but other methods of moisture content determination may also be used. (CE-009)
AS 1289.5.3.22004 Soil compaction and density tests Determination of the field dry density of a soilSand replacement method using a sand pouring can, with or without a volume displacer 12pp
Sets out a procedure for determining the field density of fine-grained, medium-grained and coarse-grained soils, by sand replacement with or without the use of volume displacers. (CE-009)
AS 1289.6.1.21998 Soil strength and consolidation tests Determination of the California Bearing Ratio of a soilStandard laboratory method for an undisturbed specimen 6pp
Sets out the procedure for the determination of the California Bearing Ratio (CBR) of an undisturbed sample of soil. (CE-009)
AS 1289.5.3.51997 Soil compaction and density tests Determination of the field dry density of a soilWater replacement method 7pp
Sets out the method for determining the field dry density of a natural or compacted coarse-grained soil by the water replacement method, using a circular density ring on the surface and a plastic sheet to retain the water. (CE-009)
AS 1289.5.8.41998 Soil compaction and density tests Nuclear surface moisture-density gaugesCalibration using standard blocks
AS 1289.6.1.31998 Soil strength and consolidation tests Determination of the California Bearing Ratio of a soilStandard field-in-place method 6pp
Sets out the procedure for the field-in-place or in situ determination of the California Bearing Ratio (CBR) of a soil. (CE-009)
15pp
Sets out the method for the following: (a) The calibration of the density system of a nuclear surface moisture-density gauge using standard blocks. (b) The partial calibration of the moisture system of a nuclear surface moisture-density gauge using standard blocks. The calibration equation, so derived, defines the slope of the moisture calibration equation. (CE-009)
AS 1289.6.2.12001 Soil strength and consolidation tests Determination of the shear strength of a soilField test using a vane 4pp
Specifies a method for determining the shear strength of a soil in the field by measuring the torque required to cause a vane of cruciform section to shear the soil.
20
AS 1289.6.2.21998 Soil strength and consolidation tests Determination of shear strength of a soil Direct shear test using a shear box 20pp
Sets out a method for determining the shear strength of a soil (in terms of effective stress) by direct shearing in a shear box. (CE-009)
AS 1289.6.7.12001 Soil strength and consolidation tests Determination of permeability of a soil Constant head method for a remoulded specimen 8pp
Sets out a method for determining the coefficient of permeability for the flow of water through a remoulded specimen by a constant head method. (CE-009)
AS 1289.6.3.12004 Soil strength and consolidation tests Determination of the penetration resistance of a soilStandard penetration test (SPT) 4pp
Sets out a method for determining the resistance of soils to the penetration of a sampler, and the obtaining of disturbed samples of the soils for identification purposes. (CE-009)
AS 1289.6.7.22001 Soil strength and consolidation tests Determination of permeability of a soil Falling head method for a remoulded specimen 8pp
Amendment 1 28 January 2003 Sets out a method for determining the coefficient of permeability for the flow of water through a remoulded specimen under the influence of a falling head of water. (CE-009)
4pp
Specifies materials, construction, finish, graduation, figuring and accuracy for retractable steel pocket rules used in construction. (BD-003)
AS 1289.6.3.21997 Soil strength and consolidation tests Determination of the penetration resistance of a soil9kg dynamic cone penetrometer test 3pp
Sets out the procedure for determining the penetration resistance of a soil to the penetration of a steel cone of 30 angle and 20 +/- 0.2 mm diameter driven with a 9 kg mass, dropping 510 mm. (CE-009)
AS 1289.6.7.31999 Soil strength and consolidation tests Determination of permeability of a soil Constant head method using a flexible wall permeameter 6pp
Sets out the method for the determination of coefficient of permeability of a soil in a flexible wall permeameter or triaxial cell with percolation under constant head conditions. (CE-009)
3pp
AS 1289.6.3.31997 Soil strength and consolidation tests Determination of the penetration resistance of a soilPerth sand penetrometer test 3pp
Amendment 1 5 November 1999 Sets out the procedure for determining the resistance of a soil to penetration by a flat ended rod of 16 +/- 0.2 mm diameter driven with a 9 kg mass, dropping 600 mm. (CE-009)
AS 1289.6.8.11995 Soil strength and consolidation tests Determination of the resilient modulus and permanent deformation of granular unbound pavement materials 13pp
Describes the determination of both the resilient modulus and permanent deformation of unbound pavement materials with a maximum particle size not exceeding 19 mm using repeated load triaxial equipment with static confining pressure and an external vertical displacement measuring device under undrained conditions without pore pressure measurement. (CE-009)
Specifies materials, construction, finish, graduation, figuring and accuracy for synthetic material measuring tapes used in construction. (BD-003)
AS 1289.6.4.11998 Soil strength and consolidation tests Determination of compressive strength of a soilCompressive strength of a specimen tested in undrained triaxial compression without measurement of pore water pressure 6pp
Describes a basic test procedure applicable to cohesive soils and sets out a procedure for determining the compressive strength of a specimen of soil in the triaxial compression apparatus under conditions in which the cell pressure is maintained constant, and in which there is no change in the total water content of the specimen. (CE-009)
3pp
AS 1289.6.9.12000 Soil strength and consolidation test Determination of stiffness of soilClegg impact value (CIV) 7pp
Sets out a method for determining the stiffness of soil in the field, in terms of the Clegg impact value (CIV), based on the deceleration of a free-falling mass. (CE-009)
Specifies graduation, figuring and accuracy for levelling staves for use with optical levelling instruments used in construction. (BD-003)
AS 12991993 Electrical equipment for coal mines Flameproof restrained plugs and receptacles 28pp
Specifies the dimensional, electrical, mechanical and test requirements for flameproof restrained plugs and receptacles for the coupling of two or more trailing cables and of trailing cables to equipment. Units rated at 660 V, 1.1 kV and 3.3 kV are included, with current ratings up to 425 A. (EL-023)
AS 1289.6.4.21998 Soil strength and consolidation tests Determination of compressive strength of a soilCompressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore water pressure 11pp
Describes a basic test procedure applicable to cohesive soils and sets out a method for determining the compressive strength of a specimen of soil in a triaxial compression apparatus under conditions in which the cell pressure is maintained constant. (CE-009)
AS 1289.7.1.12003 Soil reactivity testsDetermination of the shrinkage index of a soilShrink-swell index 4pp
Sets out a method for conducting a swell test and a simplified core shrinkage test on companion samples of undisturbed soil. Applies to samples with any initial moisture content but is particularly useful for determining the shrinkage index (see AS 2870) of soils sampled in an initially dry state. Soil suction determinations are not essential to the method. (CE-009)
AS 13001989 Electrical equipment for coal minesBolted flame-proof cable coupling devices 12pp
Specifies dimensional, electrical and mechanical requirements for bolted flameproof cable coupling devices for coupling two or more feeder cables or for coupling a cable to equipment. (EL-023)
AS 1289.7.1.21998 Soil reactivity testsDetermination of the shrinkage index of a soilLoaded shrinkage index 6pp
Sets out a method for the determination of the shrinkage index of a soil using a spring-loaded shrinkage cell. (CE-009)
AS/NZS 1301 Methods of test for pulp and paper AS/NZS 1301.001s:2002 Basic density of pulpwood 8pp
AS 1289.6.5.11999 Soil strength and consolidation tests Determination of the static cone penetration resistance of a soilField test using a mechanical and electrical cone or frictioncone penetrometer 10pp
Applies to the determination of the static cone penetration resistance of a soil in the field, using a cone penetrometer, and additionally the sleeve skin friction and friction ratio of a soil in the field, using a frictioncone penetrometer. (CE-009)
Prescribes the procedures to be used for determining basic density of pulpwood either in chip or disk form. (PK-019)
AS 1289.7.1.31998 Soil reactivity testsDetermination of the shrinkage index of a soilCore shrinkage index 5pp
Sets out a method for determining the shrinkage index of a soil by core shrinkage testing. (CE-009)
AS 1289.6.6.11998 Soil strength and consolidation tests Determination of the one-dimensional consolidation properties of a soil Standard method 10pp
Describes a procedure for determining the rate and magnitude of consolidation of soil when it is restrained laterally and loaded and drained axially. (CE-009)
AS 1290 Linear measuring instruments used in construction AS 1290.11995 General requirements 4pp
2pp
Sets out a method to be used to determine the proportion of material in wood which is soluble in boiling water. (PK-019)
Specifies the general requirements including presentation of details, graduation, figuring and adhesion of markings for linear measuring instruments used in construction. (BD-003)
21
AS/NZS 1301.11s:2005
AS/NZS 1301.11s:2005 Klason lignin in wood and pulp AS/NZS 1301.400s:1998 Tearing resistance of paper AS/NZS 1301.421:2008 Determination of pH of aqueous extracts Cold extraction method (ISO 6588-1:2005) 6pp
(PK-019)
5pp
18pp
Describes a method for determination of Klason lignin. Klason lignin is defined as those components of wood or pulp which are insoluble after treatment with 72% m/m sulphuric acid followed by boiling in 3% sulphuric acid. The lignin content should not be less than 1 per cent to provide a sufficient amount of lignin, about 20 mg, for accurate weighing. It is not applicable to bleached pulps containing small amounts of lignin. (PK-019)
Describes the procedure to be used to determine the tearing resistance of paper and certain classes of paperboard. (PK-019)
12pp
Describes the procedure to be used for the determination of bursting strength of paper by means of a burst tester. (PK-019)
AS/NZS 1301.422s:2007 Determination of the pH value of aqueous extracts of paper, board and pulpHot extraction method 3pp
Sets out a method to determine the pH of an aqueous extract of paper, board or pulp, which is obtained by using a hot extraction method. (PK-019)
AS/NZS 1301.012s:2003 Organic solvent extractives in wood, pulp and paper 4pp
Prescribes the procedure to be used in determining organic solvent extractives in wood, pulp and paper. (PK-019)
AS/NZS 1301.404s:1998 Tensile strength of paper and board (constant rate of loading method) (ISO 1924-1:1992) 5pp
This Standard is identical with and has been reproduced from ISO 1924-1:1992. (PK-019)
4pp
Provides guidelines and recommendations for the sampling of wood chips intended for the production of wood pulps. Also covers both the selection of the gross sample from a lot or shipment, mixing the sample, and the preparation of individual samples for laboratory testing from the gross sample. (PK-019)
4pp
AS/NZS 1301.424s:2006 Determination of titanium dioxide in paper, paperboard, pigments and fillers 4pp
Describes the procedure for the colorimetric quantitative determination of titanium dioxide (TiO[2]) in paper, paperboard, pigments and fillers. (PK-019)
7pp
3pp
Describes the apparatus and procedure for size classification of wood chips intended for the production of wood pulps. (PK-019)
Describes the procedure for measuring the compressive strength of liner board in the direction of the plane of the sheet. (PK-019)
AS/NZS 1301.426s:1994 Determination of thickness and apparent bulk density or apparent sheet density (ISO 534:1988) 6pp
Specifies two methods of measuring the thickness of paper and board and of calculating the apparent sheet density from the thickness determinations. This Standard is based on ISO 534:1988 and incorporates amendments which provide that the ISO preferred pressure between the faces be mandatory and allow the Standard to be applied to corrugated fibreboard. (PK-019)
7pp
Describes an indirect measure of the relative bleachability, or residual lignin content of pulp. (PK-019)
AS/NZS 1301.411s:2004 Water absorptiveness of paper and paperboard (Cobb test) (ISO 535:1991) 4pp
Describes a method of determining the water absorptiveness of sized paper and board, including corrugated fibreboard, under standard conditions. (PK-019)
3pp
12pp
Specifies the procedure for general use for the conditioning of paper; the procedure for conditioning handsheets for the physical testing of pulp is given in AS/NZS 1301.208s. (PK-019)
AS/NZS 1301.415s:2008 Standard atmosphere for testing paper and board and procedure for monitoring the atmosphere 7pp
(PK-019)
4pp
Sets out a method to determine the liner adhesion of corrugated board. (PK-019)
AS/NZS 1301.418s:1994 Ash content of wood, pulp, paper and board (ISO 1762:1974, ISO 2144:1987) 4pp
Prescribes procedures for the determination of ash content of wood, pulp, paper and board. The revision includes a change to the ashing temperature. There are optional temperatures for paper and board, and the selection of temperature will depend on the purpose of the test. It is common practice to incorporate calcium carbonate into certain papers and boards. A temperature of 900C will decompose calcium carbonate to calcium oxide, a temperature of 520C will leave calcium carbonate undecomposed. The user will choose one of these temperatures depending on which form of calcium is required in the residue. The ashing temperature for wood and pulp is now 925 25C to bring it into line with the high temperature ashing of paper. (PK-019)
4pp
Describes the gravimetric determination of the alkaliinsoluble constituents of the pulp and applies to all categories of pulps. (PK-019)
14pp
Describes the procedure to be used for the determination of bursting strength of board by means of a burst tester. (PK-019)
AS/NZS 1301.419s:2004 Water vapour transmission rate of paper (ISO 2528:1995) 11pp
Describes a method for the determination of the water vapour transmission rate of sheet materials. (PK-019)
AS/NZS 1301.439s:2007 Bendtsen roughness of paper and paperboard (ISO 8791-2:1990) 8pp
Specifies a method for the determination of the roughness of paper and board using the Bendtsen apparatus. (PK-019)
4pp
Sets out a method for the removal of latency from all high yield pulps that have been produced at elevated temperature and cooled before the concentration is reduced. Also involves disintegration at low consistency and elevated temperature followed by rapid cooling to an even lower consistency. (PK-019)
AS/NZS 1301.420s:2006 Gurley air permeance of paper (ISO 56365:2003 MOD) 8pp
Describes the Gurley method of determining the air permeance of paper and board. Applicable to papers and boards which have air permeances between 0,1 [mu]m/(Pa*s) and 100 [mu]m/(Pa*s). (PK-019)
22
AS/NZS 1301.442s:1998 Water absorption of solid fibreboard (total immersion) (ISO 5637:1989) 3pp
This Standard is technically equivalent to and has been reproduced from ISO 5637:1989. (PK-019)
AS/NZS 1301.460s:2007 Statistical concepts used in pulp and paper testing 23pp
Covers the calculation and interpretation of test results obtained by methods described in other parts of AS/NZS 1301. (PK-019)
AS/NZS 1301.459rp:2006 Zero-span wet tensile strength of pulp (ISO 15361:2000, MOD) 12pp
Specifies the procedure for determining the tensile strength of laboratory sheets at a test span which is initially zero. Applicable to all kinds of fibres, including recycled fibres. (PK-019)
AS/NZS 1301.462s:2005 Measurement of diffuse blue reflectance factor (ISO brightness) of pulp, paper and paperboard (ISO 2470:1999) 9pp
This is an adoption of ISO 2470:1999. (PK-019)
AS ISO 13022005 Geometrical product specifications (GPS) Indication of surface texture in technical product documentation (ISO 1302:2002) 46pp
Provides consumers with the rules for the indication of surface texture in technical product documentation. (ME-072)
AS/NZS 1301.444s:2004 Corrugated fibreboardDetermination of edgewise crush resistance (Unwaxed edge method) (ISO3037:1994, MOD) 3pp
Describes a method for the determination of edgewise crush resistance of corrugated fibreboard. (PK-019)
AS/NZS 1301.464s:2005 Equipment for measurement of diffuse reflectance factor (ISO 2469:1994, ISO 2469:1994/Cor 1:1998) 8pp
This is an adoption of ISO 2469:1994. (PK-019)
AS 1307 Surge arresters AS 1307.21996 Metal-oxide surge arresters without gaps for a.c. systems (IEC 60099-4 Ed. 1.0 (Bilingual 1991)) 86pp
Specifies requirements for non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit voltage surges on a.c. power circuits. This Standard is based on and includes the full text of IEC 99-4:1991 with variations and additions for Australia included within the body of the text. (EL-007)
4pp
AS/NZS 1301.466s:2005 Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness) (ISO 3688:1999) 5pp
This is an adoption of ISO 3688:1999. (PK-019)
AS/NZS 1301.446s:2005 Measurement of diffuse blue reflectance factor (brightness) of pulp, paper and paperboard 6pp
Sets out a method to measure the diffuse blue reflectance factor (brightness) of pulp, paper and paperboard. (PK-019)
5pp
AS/NZS 1301.448s:2007 Tensile strength of paper and paperboard (constant rate of elongation method) 3pp
Describes a method for measuring the tensile strength of paper at constant rate of elongation. (PK-019)
Provides for the estimation of visible dirt and shives in both fully bleached and unbleached pulps including pulp from waste paper, in sheet form. Also suitable for mechanical pulp. (PK-019)
23pp
This Standard covers the design, manufacture and methods for testing prototypes of prestressing anchorages, for establishing performance for use in prestressed concrete. (BD-084)
3pp
AS/NZS 1301.453s:1998 Bending resistance of paper and board Constant rate of deflection 5pp
Describes a method for measuring the bending resistance of paper or board at a constant rate of bending. (PK-019)
Specifies requirements for masonry cement, a hydraulic cement intended for use in mortars for masonry construction in conjunction with masonry units of clay, calcium, silicate, concrete and square dressed natural stone. (BD-010)
AS/NZS 1301.454s:2006 Determination of opacity (paper backing) Diffuse reflectance method 4pp
Describes a method for the measurement of the opacity (paper backing) of paper by diffuse reflectance. (PK-019)
AS/NZS 1301.450rp:2006 Compression strength of paper and boardShort span test (ISO 9895:1989)
AS 13181985 Use of colour for the marking of physical hazards and the identification of certain equipment in industry (known as the SAA Industrial Safety Colour Code) (incorporating Amdt 1) 6pp
Defines the colours for specific equipment in connection with accident prevention and information signs, and recommends the colours to be used for particular purposes. Red, yellow, green and blue are specified and the chromaticity limits for the colours are included. Each colour is dealt with separately, and typical examples of applications are listed. (SF-005)
5pp
AS/NZS 1301.455s:1993 Colour measurement with a diff/0 geometry tristimulus reflectometer 5pp
This Standard has been revised to include formulae for the calculation of CIELAB values from measured tristimulus values. The revision also includes additional background information on colour measurement, restricts the illuminants to CIE illuminants D65 or C, clarifies the calibration requirements and adds a new reference which gives basic information about colour and its measurement. (PK-019)
Describes a method for the determination of the compressive strength in the machine and cross directions of paper and board using a short span compression tester. (PK-019)
9pp
Prescribes a recommended practice for identifying the types of fibre present in a sample of pulp, paper or paperboard and for determining the proportions by mass of each fibre type. (PK-019)
AS/NZS 1301.456s:2006 Determination of conductivity of aqueous extracts of paper, board and pulps (ISO 6587:1992) 3pp
(PK-019)
AS/NZS 1301.452rp:2006 Determination of weight factors by the comparison method (ISO 9184-7:1994) 4pp
(PK-019)
AS 1324 Air filters for use in general ventilation and airconditioning AS 1324.12001 Application, performance and construction 11pp
Specifies requirements for the performance and construction of air filters for use in general ventilation and
AS/NZS 1301.457s:2006 Determination of moisture content in paper, board and pulps 5pp
23
AS 1324.22003
airconditioning systems. It classifies air filters on the basis of design, construction performance and application and establishes minimum criteria for acceptance of an air filter into a particular category. It does not apply to HEPA filters. (ME-080)
AS 1329.51994 Determination of copper content (0.0001% to 0.0025%)Flame atomic absorption spectrometric method 5pp
Specifies a flame atomic absorption spectrometric method for the determination of copper content in the range 0.0001% to 0.0025% copper in special high grade zinc, high grade zinc and diecast zinc alloys containing less than 4.3% aluminium and 0.06% magnesium. (CH-010)
33pp
Provides a method for laboaratory or bench testing of air filters used in general ventilation and airconditioning systems. (ME-080)
AS 13251997 Measuring cups and spoons and litre measures for domestic purposes 10pp
Specifies requirements for metric cup measures for measuring liquid, measuring spoons, fractional cup measures and litre measures. (MS-006)
AS 1329.61994 Determination of copper content (0.25% to 1.25%)Flame atomic absorption spectrometric method 5pp
Specifies a flame atomic absorption spectrometric method for the determination of copper content in the range 0.25% to 1.25% copper in special high grade zinc, high grade zinc and diecast zinc alloys containing less than 4.3% aluminium, 0.003% cadmium, 0.08% iron, 0.005% lead, 0.08%magnesium and 0.001% tin. (CH-010)
AS 1334.31982 Determination of full thickness tensile strength and elongation of conveyor belting 4pp
Describes a method for determining the full thickness tensile strength of conveyor belting. (RU-002)
AS 13272001 PlasticsStandard atmospheres for conditioning and testing (ISO 291:1997, ISO 291:1997/Cor 1:1998) 8pp
Sets out specifications relating to the conditioning and testing of all plastics and all types of test specimens at constant atmospheric conditions, which correspond to the average atmospheric conditions in laboratories. Special atmospheres applicable to a particular test or material or simulating a particular climatic environment are not included. This Standard is identical to and has been reproduced from ISO 291:1997. (PL-010)
AS 1334.81982 Determination of resistance to tear propagation and resistance of carcass to tearing 4pp
Describes a method for determining the resistance to tear propagation and resistance of carcass to tearing in conveyor belting. (RU-002)
AS/NZS 1328 Glued laminated structural timber AS/NZS 1328.1:1998 Performance requirements and minimum production requirements 31pp
Specifies product requirements for the timber used, the type of adhesive and the strength of the load in both end and lamination joints. It also gives methods for establishing properties of completed structural pieces so that product may be assigned to a stress grade. Methods of test are given to measure the strength of a glued joint. (TM-004)
AS 1334.101994 Determination of ignitability and flame propagation characteristics of conveyor belting 4pp
Sets out a method for determining the ignitability and flame propagation characteristics of a horizontally oriented specimen of conveyor belting. (RU-002)
AS/NZS 1328.2:1998 Guidelines for AS/NZS 1328: Part 1 for the selection, production and installation of glued laminated structural timber 23pp
Intended for use in conjunction with AS/NZS 1328.1 this Standard provides detailed guidance for production of glulam. A set of stress grades is given for design purposes to simplify the use and installation of graded material. Guidelines are also provided for quality control, third party certification and for establishing structural properties. (TM-004)
AS 13302004 Metallic materialsDrop weight tear test for ferritic steels 20pp
Specifies the method for conducting a drop weight test for carbon steel, low alloy steel and similar materials up to 19 mm thickness. (MT-006)
AS 1334.111988 Determination of ignitability and maximum surface temperature of belting subjected to friction 4pp
Amendment 1 14 July 1989 Describes a method for determining the ignitability and the maximum surface temperature of conveyor and elevator belting subjected to friction. (RU-002)
15pp
AS 1329 Methods for the analysis of zinc and zinc alloys AS 1329.11994 Determination of aluminium content Titrimetric method 5pp
Specifies a titrimetric method for the determination of aluminium in zinc and zinc alloys. It is applicable in the range of 3% to 13% aluminium. The method is not applicable to zinc alloys containing titanium as this interferes with the determination. (CH-010)
Specifies requirements for conveyor belting made of elastomeric materials with textile reinforcement, intended for use on conveyors using flat or troughed idlers, and on slide bed or bucket elevators. (RU-002)
AS 1329.21994 Determination of magnesium content Flame atomic absorption spectrometric method 4pp
Specifies a flame atomic absorption spectrometric method for the determination of magnesium content in the range 0.002% to 0.10% magnesium in zinc and zinc alloys containing less than 5% aluminium. (CH-010)
AS 13351995 Hose and hose assemblies for welding, cutting and allied processes (ISO 3821:1992) 9pp
Amendment 1 5 January 1998 Specifies requirements for hose and hose assemblies having a minimum rated working pressure of 1.2 MPa, for use in the welding and cutting industry. (RU-001)
AS 1329.31994 Determination of aluminium content Flame atomic absorption spectrometric method 5pp
Specifies a flame atomic absorption spectrometric method for the determination of aluminium, in the range 0.01% to 1.0%, in zinc alloys. The method is suitable in the presence of the following metals, up to the concentration indicated: antimony 0.05%, cadmium 0.5%, copper 0.1%, iron 0.1%, lead 1.5% and tin 1.0%. (CH-010)
AS 1334 Methods of testing conveyor and elevator belting AS 1334.11982 Determination of length of endless belting 1p
Describes a method for determining the length of endless conveyor and elevator belting. (RU-002)
AS 1334.21982 Determination of thickness of belting and rubber covers across the width 2pp
(RU-002)
24
AS 1359 Rotating electrical machinesGeneral requirements AS 1359.01998 Introduction and list of Parts 18pp
AS/NZS 1337.5:2004 Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) (EN 208:1999) 12pp
Specifies the adoption of EN 208:1999 as an AS/NZS Standard to specify performance requirements, test methods, marking requirements, selection and use of laser adjustment filters and eye-protectors against laser radiation in the spectral range 400 nm to 700 nm.Identical with and reproduced from EN 208:1999. (SF-006)
Introduces the AS 1359 series and lists the Parts issued to date. Lists also other Australian and IEC Standards relating to the subject. (EL-009)
AS/NZS 1359.5:2004 Three-phase cage induction motorsHigh efficiency and minimum energy performance standards requirements 20pp
Specifies revised minimum energy and high efficiency requirements for three-phase cage induction motors to be introduced on 1 April 2006 in Australia and in New Zealand on a date to be gazetted. (EL-009)
AS/NZS 1337.6:2007 Prescription eye protectors against low and medium impact 9pp
Amendment 1 19 May 2008 Provides minimum performance requirements, as well as test methods, for impact resistance and eye protection for prescription eye protection. (SF-006)
AS/NZS 1359.5:2000 Three-phase cage induction motorsHigh efficiency and minimum energy performance standards requirements 11pp Available Superseded
Amendment 1 17 December 2002 Specifies minimum acceptable efficiencies for threephase cage induction motors when measured in accordance with AS 1359.102.1 or AS 1359.102.3. This Standard also proposes additional criteria for motors to be rated as high efficiency and specifies requirements for compliance with the Standard and certification by the regulatory authorities. (EL-009)
8pp
Specifies preferred outputs of generators (5.0 kW or kVA to 10 000 kW or kVA) and of motors (0.37 kW to 10 000 kW); also two sets of preferred allocations of output to standard frame sizes for certain threephase induction motors. (EL-009)
AS/NZS 1338 Filters for eye protectors AS/NZS 1338.1:1992 Filters for protection against radiation generated in welding and allied operations 21pp
Amendment 1 19 September 1994 Specifies requirements for filters used in eye protection against high intensity radiation emitted during welding and allied operations including electrically controlled filters. A classification system is provided together with transmittance requirements for such filters. (SF-006)
AS 1359.311997 Three-phase induction motorsOperation on unbalanced voltages (IEC/TR 60892 Ed. 1.0 (Bilingual 1987)) 3pp
Provides guidance on the effects of unbalanced voltages on the performance of three-phase cage induction motors. This Standard is identical with and has been reproduced from IEC Report 892:1987. (EL-009)
Amendment 1 5 June 1998 Specifies requirements for flat synthetic-webbing slings that are intended for lifting purposes. It does not apply to slings that have been repaired. Guidance on information that should be supplied with enquiries and orders is given in an Appendix. (ME-025)
AS 1359.1011997 Rating and performance (IEC 60034-1 Ed. 10.0 (Bilingual 1996)) 67pp
Amendment 1 5 October 1997 Amendment 2 5 September 1998 Specifies duty types, ratings, site operating conditions, electrical operating conditions, thermal performance, other performance aspects, rating plate markings and tolerances for all types of rotating electrical machines not covered by other Standards. This Standard is identical with and has been reproduced from IEC 341:1996 (edition 10). (EL-009)
15pp
Sets out recommended practices for the care and use of flat synthetic-webbing slings, but does not consider repairs to such slings or the use of such slings for the lifting of personnel. (ME-025)
AS 1357 Valves primarily for use in heated water systems AS 1357.12004 Protection valves 77pp
AS 13401975 Symbols for SI units for systems with limited character sets (ISO 2955:1974) 11pp
Specifies two sets of symbols for units intended to replace internationally recognized units for use in the interchange of data between equipments capable of accepting, using, reading or displaying limited graphic character sets, in a closed environment. The Standard is technically identical with ISO 2955:1974. (IT-015)
Amendment 1 27 October 2005 Amendment 2 1 February 2007 Sets out requirements for the design, construction, testing and performance of the following types of valves within the range of DN 15 to DN 50; a. Temperature-pressure relief valves; b. Expansion control valves; c. Non-return valves; d. Temperature relief valves; e. Combination high pressure expansion nonreturn valves. (WS-026)
AS 1359.102.11997 Methods for determining losses and efficiencyGeneral (IEC 60034-2 Ed. 3.0 (Bilingual 1972), IEC 60034-2 Amd.1 Ed. 3.0 (Bilingual 1995), IEC 60034-2 Amd.2 Ed. 3.0 (Bilingual 1996)) 41pp
Specifies the calculation of efficiency from the summation of individual losses or from measurement of total losses. Specifies particular losses to be included for various types of machine. Details calibrated machine test, zero power-factor test, retardation test and electrical back-to-back test. This Standard is technically equivalent to and reproduced from IEC 342:1972 including Amd. 1:1995 and Amd. 2:1996. (EL-009)
64pp
Amendment 1 22 September 2006 Sets out requirements for the design, construction, testing and performance of control valves. (WS-026)
AS 13441997 Size coding scheme for women's clothing Underwear, outerwear and foundation garments 21pp
Specifies a size coding scheme for ready-made garments based on actual body measurements over foundation gar-
AS 13582004 Bursting discs and bursting disc devices Application, selection and installation 35pp
Amendment 1 1 February 2007
AS 1359.102.21997 Methods for determining losses and efficiencyCalorimetric method (IEC 60034-2A Ed. 1.0 (Bilingual 1974)) 18pp
Specifies the calculation of efficiency (mainly of large generators) from the summation of individual losses or from measurement of total losses, where the losses
25
AS/NZS 1359.102.3:2000
are deduced from the heat produced by them and dissipated by the coolants or in the surrounding media. This Standard is based on IEC 34-2A:1974. (EL-000) Sets out a method of obtaining representative samples of greasy wool from conventional bales. It is identical with and has been reproduced from IWTO-38-91. (TX-012) ods of calculating critical appliance characteristics, explosion relief areas, and air dilution volumes are given. (AG-011)
AS/NZS 1359.102.3:2000 Methods for determining losses and efficiencyThree-phase cage induction motors 17pp
Specifies internationally aligned test methods for determining losses and efficiency of three-phase cage induction motors. This Standard prescribes two test methods, Method 1, involving torque measurements applicable to motors of all kW ratings and Method 2, without torque measurements, applicable to motors of up to 200 kW rating. (EL-009)
29pp
Provides basic conversion information for use in converting from imperial and other non-SI units to the International System of Units (SI). (ME-071)
43pp
AS 1359.1061996 Methods of cooling (IC Code) (IEC 60034-6 Ed. 2.0 (Bilingual 1991)) 14pp
Specifies the international IC Code which comprises both complete IC designations and (derived) simplified IC designations of various methods of cooling. An annex compares the new Codes with the equivalent (superseded) Codes in IEC 34-6:1969 and AS 1359.211974. This Standard is identical with and has been reproduced from IEC 34-6:1991. (EL-009)
AS 1366 Rigid cellular plastics sheets for thermal insulation AS 1366.11992 Rigid cellular polyurethane (RC/PUR) 5pp
Amendment 1 16 November 1992 Specifies requirements for rigid cellular polyurethane in the form of sheets, board, blocks and cut shapes for thermal insulation. (PL-016)
Sets out minimum requirements for the materials, plant and equipment used in the supply of concrete; the production and, if applicable, the delivery of concrete in the plastic state; specifying, sampling, testing and compliance with specified properties of plastic and hardened concrete; and the uniformity of mixing. (BD-049)
AS 1379 Supplement 12008 Specification and supply of concrete Commentary (Supplement 1 to AS 13792007) 40pp
Provides background material to the Standard, indicates the origin of particular requirements and the departures from previous practice and explains the application of certain clauses. (BD-049)
AS 1359.1071996 Classification of types of construction and mounting arrangements (IM Code) (IEC 60034-7 Ed. 2.0 (Bilingual 1992)) 19pp
Specifies the international IM Code relating to the construction and mounting of machines which comprises both alpha-numeric designations (Code I), applicable to a limited range of machine types, and allnumeric designations (Code II), applicable to a wider range of machines, including those covered by Code I. This Standard is identical with and has been reproduced from IEC 34-7:1992. (EL-009)
35pp
5pp
Amendment 1 15 February 1993 Specifies requirements for rigid cellular polystyrene in the form of sheets, board, blocks and cut shapes for thermal insulation purposes. (PL-016)
7pp
Specifies maximum A-weighted sound power levels for new machines from 1 kW (or kVA) to 5500 kW (or kVA) at no load. For certain three-phase induction motors, maximum power levels are specified both for no load and for rated load. This Standard is identical with and has been reproduced from IEC 600349:1997. (EL-009)
6pp
Specifies material requirements for extruded rigid cellular polystyrene (RC/PS-E) used in sheets, boards, blocks and cut shapes for thermal insulation. Lists minimum properties and test methods for quality control and material specification. (PL-016)
Amendment 1 1 February 2000 Proposes requirements for specifying normal-class and special-class concrete and for their manufacture, by either the batch or the continuous production method, for supply in the plastic state, to the customer. Gives performance requirements for the materials and plant used in the manufacturing process, including accuracy of measuring and batch equipment. Criteria for compliance with specified plastic and hardened state properties are also given, together with references to standard methods of testing for these and methods of assessment for compliance with compressive strength criteria. The Appendices cover information to be supplied when specifying special class concrete and methods for determining an acceptable degree of mixing uniformity in different types of mixers. (BD-049)
AS 1359.1141997 Vibration measurements and limits (IEC 60034-14 Ed. 2.0 (Bilingual 1996)) 10pp
Specifies vibration test procedures and limits for certain d.c. and three-phase a.c. machines at nominal speeds from 600 rev/min to 3600 rev/min. This Standard is identical to, and has been reproduced from, IEC 34-14:1996. (EL-009)
AS/NZS 1367:2007 Coaxial cable and optical fibre systems for the RF distribution of analog and digital television and sound signals in single and multiple dwelling installations 142pp
Specifies requirements for the cabling of a range of premises and buildings, generally referred to in this Standard as dwellings, for distribution of analog and digital broadband interactive services, such as free-to-air TV and sound, subscription or pay TV, or in-house video systems via RF distribution. (CT-002)
AS 1379 Supplement 11997 Specification and supply of concrete Commentary (Supplement to AS 13791997) 31pp Available Superseded
Amendment 1 1 February 2000 Proposes a commentary giving background material to, and explanations of, most of the requirements of AS 1379, particularly the changes proposed for the second edition. For ease of cross-reference, clause numbers in the commentary correspond to those in AS 1379 but are distinguished by the prefix 'C'. (BD-049)
AS 13682000 PlasticsThermoplastic materials Determination of Vicat softening temperature (VST) (ISO 306:1994) 5pp
Specifies methods for the determination of the Vicat softening temperature (VST) of thermoplastic materials. The methods are applicable only to thermoplastics, for which they give a measure of the temperature at which the thermoplastics start to soften rapidly. This Standard is identical to and has been reproduced from ISO 306:1994. (PL-010)
Specifies requirements for fibre-rope slings that are intended for lifting purposes. It does not apply to mooring ropes. Guidance on information that should be supplied with enquiries and orders is given in an appendix. (ME-025)
AS/NZS 1362:1998 WoolCalculation of IWTO combined certificates for deliveries of raw wool (IWTO-31-96) 41pp
Amendment 1 5 June 1999 Amendment 2 5 July 1999 Sets out calculation procedures for combining the wool base, vegetable matter, commercial yields and mean fibre diameter test results of component lots in a delivery of raw wool, for which the issue of one overall certificate is required. Specifies the precision of the test results reported on the certificate. It is identical with and has been reproduced from IWTO-31-96. (TX-012)
18pp
21pp
Sets out practices for the care and use of fibre-rope slings, but does not consider repairs to such slings or the use of such slings for the lifting of personnel. (ME-025)
Includes material requirements, design, workmanship, metric dimensions, tests and marking of seats and flaps, including seat fastening bolts. It provides for use of any plastics material provided specifications and performance requirements are met. Test procedures are given in appendices. (WS-003)
AS 13821974 Glass milk and cream bottles of the metal foil cap type (200-600 mL capacity) 12pp
Specifies 200, 300 and 600 mL milk bottles and a 300 mL cream bottle. Locking rings can be either 35 or 38 mm external diameter for the milk bottles and 44 mm for the cream bottle. Capacity, quality of glass, form and dimensions, sampling requirements and level of resistance to thermal shock and impact are specified, with methods of test in appendices. (FT-000)
AS/NZS 1363 WoolGrab samplingGreasy wool AS/NZS 1363.1:1996 Method for grab sampling greasy wool from bales (IWTO-38-91) 16pp
Amendment 1 Amendment 2 Amendment 3 5 December 1996 5 July 1997 5 November 1997
AS 13751985 Industrial fuel-fired appliances (known as the SAA Industrial Fuel-fired Appliances Code) 44pp
Gives principles for the design, construction and operation of industrial appliances that are heated by the combustion of a fuel, i.e. ovens, furnaces, boilers, dryers and the like. It deals with the safety of the fuel combustion process, and with safety in relation to combustible vapours, dusts, etc. that may occur or be generated within an appliance. Meth-
AS 13831974 Methods for the chemical examination of eggs and egg products 55pp
Describes procedures for the preparation of samples, interpretation of results, and methods for the determination of total solids, nitrogen, lipids, reducing substances, alpha-
26
AS 14102003 SterilizersSteamPre-vacuum
55pp
AS/NZS 1385:2007 Textile floor coveringsMetric units and commercial tolerances for measurement
2pp
Provides guidance for the specification of carpet technical properties and basic metric units. (TX-009)
AS/NZS 1393:1996 Coach screwsMetric series with ISO hexagon heads 10pp
Specifies the dimensions and marking requirements for coach screws for use in timber structures in ISO preferred series diameters from 6 mm to 20 mm inclusive and lengths up to 200 mm, and with ISO hexagon heads and either full body or reduced diameter (scant) shanks, and the material requirements for steel coach screws. (ME-029)
AS 1386 Cleanrooms and clean workstations AS 1386.11989 Principles of clean space control 22pp
Specifies requirements for fully automatic jacketed prevacuum steam sterilizers that operate at a sterilizing temperature of 134C and are intended for use in hospitals and other non-industrial applications for the sterilization of porous loads, and instruments and utensils wrapped in porous material. The sterilizers are not intended for the sterilization of fluids, installation in areas associated with the use of flammable anaesthetics or volatile liquids, or downwarddisplacement cycles, unless they also comply with AS 2192. (ME-003)
AS 1417 Receiving antennas for radio and television in the frequency range 30 MHz to 1 GHz AS 1417.11987 Construction and installation (IEC 60597-1 (1977))
Introduces a classification of air cleanness and explains the principles of clean space control. Six classes of air cleanness are specified for the work zone of clean spaces under operational conditions. The Standard complements the specific requirements set out in other parts of the series. (ME-060)
16pp
6pp
Specifies requirements for cold-drawn, carbon steel wire of round cross-section in diameters 0.20 mm and over, intended for the manufacture of rope and strand. Covers wire in the bright (black) condition, drawn metallic-coated condition (drawn after coating) or finally metallic-coated condition (coated as a final operation). Coatings may be of zinc (hot-dipped or electrodeposited) or of hot-dip zinc/aluminium alloy. (MT-001)
10pp
Specifies electrical and mechanical safety requirements for antennas and supporting structures erected for the purposes of receiving radio and television broadcasting. Requirements are given for construction and installation, and guidance is given on the design of antennas with regard to windforces and live loads likely to be experienced in use. (CT-002)
11pp
Specifies material and dimensional requirements for welded steel tubing and couplings for use in water bore casing applications. (CE-007)
AS 1417.21991 Performance (IEC 60597-1 (1977), IEC 60597-2 (1977), IEC 60597-3 (1983), IEC 60597-4 (1983)) 28pp
Amendment 1 5 January 1998 Specifies the essential electrical properties of linearly polarized antennas for domestic use within the frequency range 30 MHz to 1 GHz and the conditions and methods of measurement of electrical performance parameters for these antennas and methods or procedures for relevant environmental tests. Uniform presentation of antenna performance specifications and a standard format for individual antenna specification sheets are also discussed. The Standard is technically identical with IEC 597 Parts 1 to 4 except for the mechanical properties included in Part 1 of the Standard. (CT-002)
4pp
AS 13971993 Steel sheet and stripHot-dipped zinc-coated or aluminium/zinc-coated 18pp Available Superseded
Specifies requirements for formable and structural grades of hot-dipped zinc-coated and aluminium/zinc-coated sheet and strip, up to and including 5.0 mm thick. Gives information on coating thickness determination, fabricating characteristics and guidelines on the selection of specific grades. (MT-001)
Amendment 1 4 November 2004 Specifies general requirements for cranes as defined in AS 2549. Includes the design of cranes by the traditional working stress method and also allows design by the limit states method. No set of generally accepted partial load factors necessary for crane design by the limit states method are available. (ME-005)
25pp
AS/NZS 1388:1994 Guidelines for technical information for building and construction products 10pp
Provides producers of literature for the building and construction industries with guidelines for presenting technical information so that the information can be in a clear and structured form. (BD-052)
AS/NZS 1400:1997 Heavy-duty alkaline detergents for 'in-place' cleaning in dairy factories 6pp
Specifies requirements for solubility in water, alkalinity, degree of foaming, sequestering ability and corrosion potential of detergents of low-, medium- or high-foaming type. Appendices provide methods for determining corrosion potential and foam level. (FT-025)
Specifies the requirements for manually operated chain hoists, power-operated hoists, power-operated wire rope hoists, scaffolding hoists, creeper winches, manually operated drum winches, power-operated drum winches and trolleys, as defined in AS 2549. It is complementary to AS 1418.1 and also proposes the application, design, electrical and pneumatic controls, performance testing, marking, certificates, operation and maintenance requirements for such equipment. (ME-005)
AS/NZS 1389:1997 Acidic detergents for use in the dairying industry 8pp
Specifies the requirements and the type of cleaning operations for which acidic detergents are useful, and specifies criteria for available acid content, degree of foaming and other physical properties. Appendices describe methods for assessing the acid content, corrosion potential and degree of foaming. (FT-025)
48pp
AS 1418.31997 Bridge, gantry and portal cranes (including container cranes) and jib cranes 35pp
Amendment 1 5 September 1998 Amendment 2 17 June 2002 Specifies the requirements for bridge, gantry, semigantry and portal cranes as defined in AS 2549, and for container and heavy duty cranes. Sections are included on classification and load rating, structure, stability, mechanisms, access from fixed platforms, access from mobile platforms, clearances, electrical access isolators, speed limitations for pendant controlled cranes, marking and data, inspection and commissioning, and guarding. Appendices give further requirements for access and clearance, and the use of ladders, and give guidance on information to be supplied with enquiry, order or tender and typical hazards. (ME-005)
Provides formulae for the design of rotating steel shafts that are subjected to torsional, bending and axial-tensile loads either singly or in combination, on the basis of infinite life. (ME-005)
AS/NZS 1390:1997 Cup head bolts with ISO metric coarse pitch threads 13pp
Specifies the dimensional and marking requirements for cup head bolts with ISO metric coarse pitch threads in diameters from 5 mm to 24 mm inclusive, and the material requirements for steel cup head bolts of property class 4.6. (ME-029)
AS 14062004 Electroplated coatingsNickel and chromium on plastics for decorative applications 13pp
Specifies the requirements for electroplated coatings for nickel and nickel plus chromium on plastics for decorative applications. (MT-009)
5pp
Specifies requirements for the sizing of commonly used cooking utensils. (MS-006)
27
AS 1418.42004
AS 1418.42004 Tower cranes
vehicle and loading cranes, including side-loading cranes. (ME-005)
39pp
Sets out requirements for tower cranes: (a) that are dismantled when they have served their purpose; and (b) of the permanently erected type, as defined in AS 2549. (ME-005)
AS 14202008 ISO metric hexagon socket head cap screws (ISO 4762:2004) 11pp
Adopts ISO 4762:2004 to specify the characteristics of hexagon socket head cap screws with coarse pitch thread from M1.6 up to and including M64 and product grade A. (ME-029)
27pp
37pp
Specifies requirements for crane collector systems incorporating a sliding or rolling contact device. Does not cover direct-connected systems such as cable reelers or flexible cable systems. (ME-005)
Amendment 1 4 August 2004 Specifies requirements for mobile cranes, as defined in AS 2549, and includes the tests necessary to verify the quality of design and the structural integrity of the cranes. It is intended for use with AS 2550.5, which specifies the requirements for the safe use of these cranes. It is complementary to AS 1418.1. (ME-005)
26pp
Specifies requirements for building maintenance units and supporting structures permanently provided for use and which incorporate power-operated suspension equipment. It does not include requirements for suspended scaffolding. It gives guidance to manufacturers, statutory authorities and users in the form of minimum engineering requirements which are necessary for the design manufacture, installation and commissioning of building maintenance units. It includes a section on loads tests to be conducted and an appendix gives details of those items to be inspected and tested during commissioning. It is intended for use with AS 1418.1. (ME-005)
AS/NZS 1421:1996 ISO metric hexagon socket set screws (ISO 4026:1993, ISO 4027:1993, ISO 4028:1993, ISO 4029:1993) 11pp
Specifies the dimensional requirements for hexagon socket set screws with ISO metric coarse pitch series threads of diameters from 1.6 mm to 24 mm and with flat, cup, cone or dog points, and the material requirements for steel hexagon socket set screws of property class 45H. This Standard is based on but not equivalent to ISO 4026:1993, ISO 4027:1993, ISO 4028:1993 and ISO 4029:1993. (ME-029)
AS/NZS 1427:1996 ISO metric machine screws (ISO 1207:1992, ISO 1580:1994, ISO 2009:1994, ISO 2010:1994, ISO 7045:1994, ISO 70461:1994, ISO 7047:1994) 22pp
Amendment 1 5 June 1997 Specifies the dimensional requirements for machine screws with ISO metric coarse pitch series screw threads of diameters from 1.6 mm to 10 mm and with countersunk, raised countersunk, pan, cheese, mushroom, hexagon and hexagon washer head styles and the material requirements for steel machine screws of property class 4.8. This Standard is based on but not equivalent to ISO 1207:1992, ISO 1580:1994, ISO 2009:1994, ISO 2010:1994, ISO 7045:1994, ISO 7046.1:1994 and ISO 7047:1994. (ME-029)
34pp
45pp
Specifies requirements, additional to those in AS 1418.1, for special purpose appliances including platform hoists, tip truck hoisting systems, earthmoving equipment used as a crane, and side-boom pipelayers. Application, design, controls, performance, components, testing, marking, operation and maintenance are covered. Appendices provide guidance on information to be supplied with enquiry, order, tender or request for hire, commissioning, inspecting and operation, and use of platform hoists. (ME-005)
Amendment 1 5 December 1995 Specifies the requirements for the design, construction and testing of concrete placing equipment covering classification, rating, working zones, equipment loads, stability, boom motions, operational design, equipment, delivery pipelines, guarding, repairs, servicing, marking, manuals and testing. The appendices include equipment types, enquiry order and tender information and stability calculations. (ME-005)
AS 1428 (Set)2003 Design for access and mobility Set AS 1428 Design for access and mobility AS 1428.12001 General requirements for accessNew building work 60pp
Specifies design requirements applicable to new building work, including public and commercial, to provide access for people with disabilities. Attention is given to the needs of people who use wheelchairs, people with ambulatory disabilities and sensory disabilities, to permit independent use of buildings. (ME-064)
34pp
28pp
Specifies the requirements for vehicle hoists as defined in AS 2549. It applies to wheel-supporting, axlesupporting and frame-supporting vehicle hoists, but does not apply to vehicle jacks, trolley jacks, car stackers or vehicle roll-over equipment. Sections are included on their design, installation, testing and operation and maintenance requirements. Appendices provide guidance on deflection limits, hazards and illustrations of typical vehicle hoists. It is intended for use with AS 1418.1 and AS/NZS 2550.9 which provides guidance on the safe use of vehicle hoists. (ME-005)
Specifies the design requirements for mast climbing work platforms as defined in AS 25491996. It does not apply to mobile elevating work platforms, builders hoists or suspended access equipment. Sections are included on loads and stability, design, mechanism, electrical systems, controls, data marking, manuals and the type tests and production tests required. Appendices give guidance on typical hazards and the special requirements relative to multi-level work platforms. (ME-005)
AS 1428.11998 General requirements for accessNew building work 57pp Available Superseded
Specifies design requirements applicable to new building work in public and commercial buildings, to provide access for people with disabilities. Attention is given to the needs of people who use wheelchairs, people with ambulatory disabilities and sensory disabilities, to permit independent use of buildings. This new edition incorporates Amendment No. 1, 1993, and draft Amendment No. 2 issued for public comment as DR 97355. (ME-064)
112pp
Amendment 1 27 February 2007 Amendment 2 14 December 2007 Amendment 3 19 November 2008 Specifies requirements for elevating work platforms as defined in AS 2549. Does not apply to passenger goods lifts, builders' hoists or fixed elevating work platforms, nor does it apply to any matter relating to firefighting or any matter relating to vehicles upon which aerial devices are mounted, except to a vehicle being, while stationary, a stable support for the aerial device. Intended for use with AS 2550.10 and AS 1418.1. (ME-005)
41pp
Amendment 1 10 March 2003 Amendment 2 28 November 2003 Specifies the general requirements for crane runway girders and monorails designed to AS 1418.1 and either AS 3990 or AS 4100. (ME-005)
55pp
64pp
Specifies requirements for self-propelled non-slewing and slewing telescopic handlers not greater than 5 either side of the longitudinal axis of seated rideroperated telescopic handlers. (ME-005)
AS 1428.31992 Requirements for children and adolescents with physical disabilities 16pp
Sets out requirements for facilities specifically intended for use by children and adolescents with physical disabilities. Details on four age ranges (from 3 to
Specifies requirements for the design of, methods of verification for and information to be provided with
28
57pp
5pp
Provides requirements for the design and application of tactile ground surface indicators for new buildings to ensure safe and dignified mobility of people who are blind or vision-impaired. (ME-064)
Specifies a general method for determining the Vicat softening temperature of thermoplastics pipes and fittings. It can also be used for other thermoplastics items. (PL-045)
AS 1428.41992 Tactile ground surface indicators for the orientation of people with vision impairment 15pp Available Superseded
Amendment 1 5 December 1995 Sets out requirements for the design and installation of tactile ground surface indicators to assist people with vision impairment. Specific types of ground surface indicators that warn of hazards and denote direction are provided. (ME-064)
19pp
Specifies the requirements for hot-rolled carbon, carbonchromium, nickel-chromium-molybdenum and siliconmanganese spring steels which are in either the as-rolled, annealed or normalized condition. (MT-001)
AS/NZS 1462.6:2008 Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressureResistance to internal pressure 14pp
(PL-045)
AS/NZS 1429 Electric cablesPolymeric insulated AS/NZS 1429.1:2006 For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV 35pp
Specifies the requirements for cross-linked polyethylene (XLPE) and ethylene propylene rubber (EPR) insulated, individually screened single-core and threecore cables for fixed installations for electricity supply, with or without armour. (EL-003)
AS 14482007 Carbon steel and carbon-manganese steels Forgings (ruling section 300 mm maximum) 13pp
Amendment 1 31 January 2008 Specifies the requirements for carbon steel and carbonmanganese steel forgings for general engineering purposes with ruling section up to and including 300 mm. (MT-001)
AS/NZS 1462.10:1998 Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications 3pp
Sets out methods for hydrostatic pressure testing of fittings with inspection and test openings and assembled elastomeric seal joints for non-pressure applications. (PL-045)
13pp
AS/NZS 1429.2:1998 For working voltages above 19/33 (36) kV up to and including 76/132 (145) kV 29pp
Specifies requirements for the construction and testing of single-core cross-linked polyethylene (XLPE) insulated cables for fixed installations for electricity supply. (EL-003)
Specifies the requirements for the production and supply of carbon and carbon-manganese steel tubes of round, square, rectangular or other non-circular cross-section produced by either cold-forming or hot-forming, and intended for use in mechanical applications. (MT-001)
AS/NZS 1462.11:1996 Method for high temperature stress-relief testing of fittings 2pp
Sets out the procedure for detecting inclusions, voids, lack of fusion along weld lines, and residual stresses resulting from the moulding process. (PL-045)
AS 14571999 Geometrical Product Specifications (GPS) Length standardsGauge blocks (ISO 3650:1998) 15pp
Specifies dimensional and quality characteristics of gauge blocks with a rectangular section and a nominal length ranging from 0.5 mm to 1000 mm. Limit deviations and tolerances are given for the calibration grade K and for the grades 0, 1 and 2. This Standard is identical with and has been reproduced from ISO 3650:1998. (ME-027)
AS/NZS 1462.13:2006 Method for the determination of elastomeric seal joint contact width and pressure 6pp
Sets out a procedure for determining the contact width and contact pressure profile of an elastomeric seal joint. Allows for both spigot-mounted and socketmounted elastomeric seal joints. (PL-045)
AS 14322004 Copper tubes for plumbing, gasfitting and drainage applications 20pp
Specifies requirements for seamless copper tubes intended for use in pressure and non-pressure plumbing, gasfitting and drainage applications. (WS-018)
AS 1462 (Frc) Methods of test for unplasticized PVC (UPVC) pipes and fittings
(PL-045)
AS/NZS 1462.14:1996 Method for determination of the light transmission of pipe 6pp
Sets out a procedure for determining the diffuse light transmission of pipe. (PL-045)
AS 1462 (Lst) Methods of test for unplasticized PVC (UPVC) pipes and fittings
(PL-045)
Specifies requirements for wire-coil flat slings that are intended for lifting purposes. Guidance on information that should be supplied with enquiries and orders is given in an appendix. (ME-025)
AS/NZS 1462.15:1996 Method for determination of vinyl chloride monomer content 4pp
Sets out the procedure for determining the concentration of vinyl chloride monomer in PVC pipes and fittings. (PL-045)
AS/NZS 1462 Methods of test for plastics pipes and fittings AS/NZS 1462.1:2006 Method for determining the dimensions of pipes and fittings 8pp
Describes a method for determining the dimensions of plastics pipes and fittings, i.e. outside diameter, wall thickness, length, squareness of pipe ends and internal length, mouth diameter and root diameter of sockets. (PL-045)
10pp
Sets out practices for the care and use of wire-coil flat slings, but does not consider repairs to such slings or the use of such slings for the lifting of personnel. (ME-025)
AS 14422007 Carbon steels and carbon-manganese steels Hot rolled bars and semi-finished products 20pp
Specifies the requirements for carbon steel and carbonmanganese steel rods, bars, blooms, billets and slabs, delivered in the as-rolled or normalized condition, for forging and for general engineering purposes. (MT-001)
AS/NZS 1462.2:2006 Method for determining the flattening properties of plastics pipes and fittings 4pp
Sets out a method for determining the flattening properties of plastics pipes and fittings. (PL-045)
AS/NZS 1462.19:2006 C-ring test for fracture toughness of PVC pipes (ISO 11673:2005) 13pp
Specifies a method for establishing the minimum fracture toughness of unplasticized (vinyl chloride) (PVCU) pressure pipes. (PL-045)
AS/NZS 1462.3:1998 Method for determining the impact characteristics of pipes 5pp
Specifies a method for determining the impact characteristics of plastic pipes when subjected to multiple impacts at 20C or 0C, as appropriate. (PL-045)
AS/NZS 1462.20:1996 Method for the determination of long-term failure stress of PVC moulding compounds 3pp
Sets out the method for determining the long-term failure stress of PVC injection moulding compound. (PL-045)
AS 14442007 Wrought alloy steelsStandard, hardenability (H) series and hardened and tempered to designated mechanical properties 59pp
Amendment 1 27 February 2008 Specifies requirements for wrought alloy steels intended for general engineering purposes and is applicable to hot-rolled or cold-finished bars for machines, booms, billets and slabs for forgings, and forgings. (MT-001)
2pp
This method sets out a procedure for determining bond strength between the inner and outer walls of hollow profile structured wall pipe. (PL-045)
29
AS/NZS 1462.23:2006
AS/NZS 1462.23:2006 Method for determination of ring flexibility 4pp
Sets out a procedure for determining the ring flexibility of plastics pipes with structured walls. (PL-045) lowing forms: hard-drawn, drawn metallic coated, oilhardened and tempered, or soft-drawn. (MT-001)
23pp
AS 1462.242003 Determination of resistance to crack propagationTest methods for slow crack growth in notched pipes (notch test) 10pp
Specifies a method of test for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms of time to failure in a hydrostatic pressure test on a pipe with machined longitudinal notches in the outside surface. (PL-045)
Specifies safety requirements for the design, manufacture, guarding and use of machinery for the primary milling of saw logs. (SF-007)
Covers screws in diameters from numbers 2 to 18 and lengths up to 120 mm. The head varieties are countersunk, raised countersunk and round. Materials and mechanical properties are included for steel, brass, aluminium alloy, silicon bronze and 18/8 stainless steel. Preferred diameter/length combinations, and details of recess penetration gauging for 'Pozidriv ' cross recesses are given in appendices. (ME-029)
AS/NZS 1477:2006 PVC pipes and fittings for pressure applications 29pp
Specifies requirements for PVC pipes and fittings for pressure applications for use below ground or above ground, where they are not exposed to direct sunlight. (PL-021)
AS/NZS 1462.25:2005 Determination of slow-crack-growth of PE (polyethylene) resinsNotched, constant ligament-stress (NCLS) method 8pp
Sets out a method to determine the susceptibility of polyethylene resins to slow-crack-growth under a constant ligament-stress in an accelerating environment. (PL-045)
AS 1478 Chemical admixtures for concrete, mortar and grout AS 1478.12000 Admixtures for concrete 47pp
AS/NZS 1462.26:2003 Determination of weathering resistance of plastics pipes for external storage 3pp
Amendment 1 7 July 2003 Sets out a method for determining the weathering resistance, including resistance to ultraviolet radiation of plastics pipes and fittings. (PL-045)
Sets out the requirements for chemical admixtures to be added to concrete mixes incorporating portland and blended cements. (BD-033)
AS 1478.22005 Methods of sampling and testing admixtures for concrete, mortar and grout 33pp
Sets out procedures for sampling admixtures or packaged grouts and mortars containing admixtures, and testing mortar and grout mixes containing admixtures. (BD-033)
AS/NZS 1462.28:2003 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds (ISO 18553:2002) 9pp
Describes a method with two procedures for the assessment of pigment or carbon black particle and agglomerate size and degree of dispersion in polyolefin pipes, fittings and compounds. (PL-045)
AS 1473.52001 Finishing machineryMoulding machines and routers with rotating tool 53pp
Specifies the safety requirements for the design, manufacture, safeguarding and use of moulding and routing machines used in the manufacture of components for joinery, furniture and the like. To be read in conjunction with AS 1473.2, which contains general requirements. (SF-007)
AS/NZS 1462.29:2006 Plastics piping and ducting systems Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003, MOD) 27pp
Sets out a method for estimating the long-term hydrostatic strength of thermoplastics materials by statistical extrapolation. (PL-045)
424pp
Specifies the form and establishes the interpretation of computer programs expressed in the FORTRAN language. It consists of a full language and a subset language. Its purpose is to promote portability of FORTRAN programs for use on a variety of data processing systems. It is identical in content and format with ISO 1539:1979 which in turn is an endorsement of ANSI X3.91978. (IT-015)
AS 1515 Copper alloys AS 1515.11994 Determination of lead in copper alloys (flame atomic absorption spectrometric method) 6pp
Specifies a flame atomic absorption spectrometric method for the determination of lead content between 0.01% and 10% in copper alloys containing a maximum of 10% aluminium, 80% copper, 5% iron, 5% manganese, 40% nickel, 3% silicon, 10% tin and 40% zinc. (CH-010)
AS 1515.21994 Determination of manganese content Flame atomic absorption spectrometric method 5pp
Specifies a flame atomic absorption spectrometric method for the determination of manganese content between 0.002% and 2.1% in copper alloys containing a maximum of 10% aluminium, 80% copper, 5% iron, 30% nickel, 3% silicon, 10% tin and 40% zinc. (CH-010)
30
9pp
Sets out specifications for butt weld tubular fittings including bends, tees, reducers, laterals, y-sections and crosses, for incorporation in pipelines in food processing plants. Also sets out dimensional, material and hygienic requirements for these fittings. (FT-027)
AS 1530.72007 Smoke control assembliesAmbient and medium temperature leakage test procedure 18pp
Sets out test procedures for a method of test for determining the smoke leakage through doors and shutters. Follows the basic principles and provisions contained in ISO 5925-1. (FP-018)
8pp
AS 1515.41978 Method for the electrolytic determination of copper in wrought and cast copper alloys 10pp
Applies to determination of copper in alloys with copper content 50 to 95%. The copper in solution after electrodeposition is complete is determined by atomic absorption spectroscopy. (CH-010)
Specifies materials, dimensions, tolerances, surface roughness, assembly and hygienic requirements for both welded- and extended-type clamp liners and gaskets in pipe couplings for the food industry. The revision includes additional welded-type clamp liner and gasket dimensions. (FT-027)
AS/NZS 1530.7:1998 Smoke control door and shutter assembliesAmbient and medium temperature leakage test procedure (ISO/CD 5925-1) 11pp Available Superseded
Sets out test procedures for a method of test for determining the smoke leakage through doors and shutters. This Standard is based on but not equivalent to ISO/CD 5925-1. (FP-018)
AS 1530 Methods for fire tests on building materials, components and structures AS 1530.11994 Combustibility test for materials 21pp
Sets out a test method for determining the combustibility of building materials and is one of a series of test methods for evaluating the potential fire hazard of building products. This fire test was developed for use by those responsible for selection of construction materials which, although not completely inert, produce only a limited amount of heat and flame when exposed to temperatures of approximately 750C. This revision aligns the test method more closely with ISO 1182:1990 but specifies combustibility criteria necessary for regulatory purposes. (FP-018)
AS 1530.8.12007 Tests on elements of construction for buildings exposed to simulated bushfire attackRadiant heat and small flaming sources 38pp
Sets out test procedures and criteria for the determination of elements of construction for buildings exposed to simulated bushfire attack-Radiant heat and small flaming sources. (FP-018)
AS 1530.8.22007 Tests on elements of construction for buildings exposed to simulated bushfire attackLarge flaming sources 24pp
Sets out test procedures and criteria for the determination of elements of construction for buildings exposed to simulated bushfire attack-Large flaming sources. (FP-018)
8pp
19pp
Specifies requirements for standard grade cold-reduced electrolytic tinplate and cold-reduced blackplate supplied in either sheet or coil form. (MT-001)
AS/NZS 1518:2002 External extruded high-density-polyethylene coating system for pipes 33pp
Amendment 1 3 May 2006 Provides requirements for use by purchasers and manufacturers of steel pipeline systems, for external protection of pipeline systems against corrosion, by a method of annular or laterally extruded layer of high-density polyethylene over a sealant layer. Operating temperatures are in the range of -20C to 55C. (ME-038)
Amendment 1 12 July 1993 Specifies the apparatus and test method for determining the flammability index of a material. Main changes in this edition of the Standard are the inclusion of a statistical evaluation of the test results, a change to the speed factor formula so that the flammability indices form a continuous range and a more detailed form of test report. (FP-018)
AS/NZS 1530.3:1999 Simultaneous determination of ignitability, flame propagation, heat release and smoke release 30pp
Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke. Apparatus, test procedure, indices for grading and mounting procedures for specimen materials are provided. (FP-018)
AS/NZS 1519:2006 Information and documentationInternational Standard Book Number (ISBN) (ISO 2108:2005) 21pp
Proposes the adoption of ISO 2108:2005 which specifies the specifications for the International Standard Book Number (ISBN) as a unique international identification system for each product form or edition of a monographic publication published or produced by a specific publisher. (IT-019)
AS 1530.31989 Simultaneous determination of ignitability, flame propagation, heat release and smoke release 13pp Available Superseded
Amendment 1 16 April 1992 Describes a single test for grading building materials on the basis of ignition tendency, flame spread, heat development and tendency to produce smoke. Apparatus, test procedure and indices for grading are provided. (FP-018)
AS 1528 Tubes (stainless steel) and tube fittings for the food industry AS 1528.12001 Tubes 5pp
Specifies material, process of manufacture, dimension and tolerances, welded tubing, surface finish, hygienic requirements, heat treatment, internal pressure testing, visual inspection, packaging, condition of delivery and marking of tubes. (FT-027)
41pp
Specifies the requirements for screwed couplings. Section 1 applies to recessed ring joint type. Section 2 applies to trapezoidal threads type. These couplings are used for effecting joins in pipelines in food processing plants. Both sections propose dimensions, tolerances, surface roughness materials, assembling and hygienic requirements for both welded-type and expanded-type male parts and liners and for nuts, ring joints or gaskets. In this revision new dimensions have been included. Appendices irrelevant for the industry with changing technologies have been deleted. (FT-027)
Specifies the conditions for performing the Izod impact test on metals. (MT-006)
13pp
Specifies the conditions for performing the Charpy Vnotch impact test on metals. (MT-006)
13pp
Specifies the conditions for performing the Charpy Unotch impact test on metals. (MT-006)
19pp
Specifies a method for the static calibration of the energy-measuring system of machines used for impact tests on metals. (MT-006)
31
AS 1544.52003
AS 1544.52003 Assessment of fracture surface appearance of steel 12pp
Specifies the assessment of the fracture appearance of notached bar test pieces of carbon, carbon-manganese and low alloy steels. (MT-006)
86pp
AS/NZS 1546 On-site domestic wastewater treatment units AS/NZS 1546.1:2008 Septic tanks 69pp
AS 15482008 Fine grained, weldable steel plates for pressure equipment 25pp
Specifies requirements for hot-rolled, fine grained, fully killed carbon manganese steel plates to a maximum thickness of 150 mm for use in the construction of pressure equipment. (ME-001)
Proposes requirements for the arc welding of steel structures made up of combinations of steel plate, sheet or sections, including pipe, hollow sections and built-up sections (collectively referred to herein as sheet steels) up to 4.8 mm in thickness. (WD-003)
AS/NZS 1559:1997 Hot-dip galvanized steel bolts with associated nuts and washers for tower construction 24pp
Specifies dimensional material and marking requirements for single nut and double nut hot-dip galvanized steel bolts with associated nuts and washers for tower construction with ISO metric coarse pitch series threads in diameters from 12 mm to 30 mm inclusive and lengths up to 160 mm for single nut bolts, 125 mm for double nut bolts and from 180 mm to 270 mm for step bolts. Clamping lengths are tabulated in an appendix and equations for the determination of the clamping lengths are given. (ME-029)
AS/NZS 1546.1 specifies performance requirements and performance criteria for septic tanks, technical means of compliance and provides test specifications that enable septic tanks to be manufactured to comply with the performance requirements and performance criteria. (WS-013)
AS/NZS 1554 Set:2008 Structural steel welding Set AS/NZS 1554 Structural steel welding AS/NZS 1554.1:2004 Welding of steel structures
584pp
60pp
97pp
Specifies a set of performance criteria for septic tanks which provide a base against which any septic tank, conventional or innovative, may be assessed. It also provides basic specifications covering septic tanks made of various materials. These specifications are to be used by manufacturers and quality assessors for demonstrating compliance of a product with the Standard. (WS-013)
Amendment 1 20 January 2005 Specifies requirements for the welding of steel structures made up of combinations of steel plate, sheet or sections, including hollow sections and built-up sections, or castings and forgings. It is limited to the welding of steel parent material with a specified minimum yield strength not exceeding 500 MPa. It does not apply to oxyacetylene, friction, thermoset or resistance welding processes or to the welding of pressure vessels or pressure piping. (WD-003)
AS 1562 Design and installation of sheet roof and wall cladding AS 1562.11992 Metal 11pp
42pp
AS/NZS 1546.2 aims to: 1. Provide a set of performance statements that form a base against which any waterless composting toilet, conventional or innovative, may be assessed. 2. Provide manufacturers of waterless composting toilets with a performance evaluation test that will confirm the conditions under which it will function best (this will enable certification bodies to check that a product conforms to the Standard). 3. Ensure that the operation and maintenance of a waterless composting toilet is done in a safe manner that meets basic health requirements given that it involves the removal of composted or partially composted material. (WS-013)
25pp
Amendment 1 12 July 1993 Amendment 2 5 September 1995 Specifies requirements for the design and installation of all classes of self-supporting sheet metal roof and wall cladding for both cyclone and non-cyclone regions. (BD-014)
Amendment 1 29 December 2003 Specifies requirements for the stud welding of steel studs to steel elements, such steel studs being used for the attachment of members and connection devices to concrete, and for fastening of other members and appurtenances. This Standard does not apply to the welding of studs to pressure vessels. (WD-003)
69pp
38pp
Specfies performance requirements for the assessment of conventional and innovative water composting toilets, and includes a performance evaluation test. Also includes guidelines for the safe conduct of operation and maintenance of waterless composting toilets. (WS-013)
Specifies requirements for the welding of reinforcing steel used in concrete structures that are designed and constructed in accordance with AS 3600 or NZS 3101.1, as well as other Standards that may be appropriate. It also applies to the welding of steel connection devices, inserts, anchors and anchor details, including prefabricated assemblies required in reinforced and precast concrete constructions (WD-003)
AS 1562.32006 Plastic
16pp
Specifies procedures for the design and installation of plastic roof and wall cladding materials for walls and roofs. (PL-022)
AS/NZS 1554.4:2004 Welding of high strength quenched and tempered steels 86pp
Specifies requirements for the welding of steel structures made up of combinations of steel plate, sheet or sections, including hollow sections and built-up sections, or castings and forgings, by the MMAW, SAW, GMAW, GTAW or TIG, FCAW, ESW and EGW processes. The Standard is limited to the welding of quenched and tempered steel parent material. (WD-003)
16pp
Specifies the procedures for the design and installation of plastic roof and wall cladding materials. (PL-022)
AS/NZS 1554.5:2004 Welding of steel structures subject to high levels of fatigue loading 77pp
Specifies requirements for the welding of steel structures made up of combinations of steel plate, sheet or sections, including hollow sections and built-up sections, or castings and forgings, by the MMAW, SAW, GMAW, GTAW or TIG, FCAW, ESW and EGW processes. The Standard is limited to the welding of steel parent material with a specified minimum yield strength not exceeding 500 Mpa. (WD-003)
32
2pp
11pp
Provides information on minimum requirements for sampling paints during manufacture to ensure that the sample is representative of the batch. (CH-003)
Amendment 1 16 November 1992 Specifies requirements for the materials, design, erection and dismantling of suspended scaffolds including the supporting structure. (BD-036)
AS/NZS 1580.103.1:1995 Examination and preparation of samples for testing (ISO 1513:1992) 5pp
Provides a procedure for the examination of a single sample and the procedure for preparation by blending of multiple samples that are to be tested. Identical with ISO 1513:1992. (CH-003)
AS/NZS 1568:1998 Copper and copper alloysForging stock and forgings 9pp
Specifies requirements for copper and copper alloy wrought or cast forging stock, and forgings for general engineering purposes. Chemical composition, mechanical properties and manufacturing tolerances are specified, and appendices give purchasing guidelines and information on related composition specifications. (MT-002)
AS 15691998 Copper and copper alloysSeamless tubes for heat exchangers 15pp
Specifies requirements for round seamless copper and copper alloy heat exchanger tubes for use in condensers, evaporators, heaters and coolers. Provision is also made for heat exchanger tube for pressure equipment. Tube may be supplied as straight lengths or U-bends, with outside diameters of 6.35 mm and above. (MT-002)
AS/NZS 1576.6:2000 Metal tube-and-coupler scaffolding Deemed to comply with AS/NZS 1576.3 28pp
Specifies requirements for unsheeted metal tube-and coupler scaffolding that does not exceed 33 m in height and is deemed to comply with the performance requirements of AS/NZS 1576.3 for light, medium and heavy duty loads. The Standard does not apply to prefabricated (modular) scaffolds and scaffolding installations that require specific engineering design to establish the strength of any part of the scaffold or the adequacy of the supporting structure. (BD-036)
2pp
Sets out a method for the pretreatment of metal test panels by hand or mechanical sanding. (CH-003)
25pp
Specifies requirements for the manufacture and performance of scaffold planks excluding prefabricated platforms. Specific manufacturing requirements are given for solid timber, vertically laminated timber and metal scaffold planks. Includes test methods for stiffness, strength, sliding and slip. (BD-036)
AS/NZS 1580.106.1:1995 Preparation of timber test panels for outdoor weathering test 1p
Provides a procedure for preparing timber test panels for the outdoor weathering test of AS/NZS 1580.457.1. (CH-003)
AS 15721998 Copper and copper alloysSeamless tubes for engineering purposes 16pp
Specifies requirements for round, square and rectangular seamless copper and copper alloy tubes for general engineering purposes. Chemical composition, mechanical and other properties, and manufacturing tolerances are specified. (MT-002)
AS 15792001 Arc-welded steel pipes and fittings for water and waste-water 32pp
Specifies requirements for arc welded steel pipes and fittings, with butt-welded seams, having diameters equal to or greater than 100 mm nominal size (DN 100), intended for the conveyance of water and waste water at pressures up to 6.8 MPa, and for use as piles. (WS-009)
AS 1580.107.12004 Determination of wet film thickness from dry film mass 2pp
Sets out a procedure for the determination of the wet film thickness of a coating from its dry film mass. (CH-003)
AS/NZS 1573:1995 Copper and copper alloysWire for engineering purposes 9pp
Specifies requirements for copper and copper alloy wire for general engineering purposes supplied in forms other than straight lengths. Requirements including chemical composition, mechanical properties and dimensional tolerances are specified. (MT-002)
AS 1580 Paints and related materialsMethods of test AS 1580.02004 Introduction and list of methods 8pp
AS/NZS 1580.107.2:1995 Determination of wet film thickness from wet film mass 3pp
Specifies a procedure for the determination of the wet film thickness of a paint coating from its wet film mass. (CH-003)
AS/NZS 1574:1996 Copper and copper alloysWire for electrical purposes 12pp
Specifies requirements for three grades of copper wire, which may be plain or tinned and one grade of copper alloy wire for general electrical purposes, supplied in forms other than straight lengths. It does not apply to wires intended for special applications such as those requiring enamelling or textile covering, nor does it apply to wires taken from stranded conductors, either bare or covered or from insulated cables and flexible cords. Chemical composition, mechanical and electrical properties and a hydrogen embrittlement test are specified, and appendices provide information on related specifications and testing. (MT-002)
Deals with methods for testing paints and related materials. It includes documents that describe test conditions, sampling procedures and provides guidance on the applicability of the methods. (CH-003)
AS/NZS 1580.107.8:1995 Application of paint at a nominated spreading rate by determination of wet film mass (brush application) 3pp
Specifies a procedure for determining the spreading rate of paint based on the wet film mass of the paint. (CH-003)
2pp
Sets out a method for the drying or curing of painted panels by stoving. (CH-003)
AS/NZS 1580.108.1:1994 Determination of dry film thickness on metallic substratesNon-destructive methods 5pp
Specifies non-destructive test methods for determining the dry film thickness on metallic substrates using magnetic torsion pull-off instruments, magnetic induction instruments and eddy current instruments. (CH-003)
Sets out design and operational requirements for scaffolding, except trestle scaffolding, portable ladders intended to be used as working platforms and elevating working platforms. (BD-036)
30pp
3pp
Amendment 1 16 November 1992 Specifies requirements for materials, design and performance of couplers and accessories for use with tubular scaffolding. (BD-036)
3pp
Sets out a method for sampling paints and related materials within the following classifications. (a) Group A: prepared paints. (b) Group B: paste paints and pigment pastes. (c) Group C: powder paints and dry pigments. (d) Group D: liquids. (CH-003)
3pp
Provides a procedure for determining the density of liquid paint that is not subject to foaming. (CH-003)
33
AS/NZS 1580.202.2:1995
AS/NZS 1580.202.2:1995 Density of water-dispersed paints subject to foaming 3pp
Provides a procedure for determining the density of water-dispersed paints that are subject to foaming. (CH-003) a dry, light-coloured paint film at a specified spreading rate. (CH-003)
9pp
Sets out three equivalent methods for determining the consistency of paints and related materials using a Stormer-type viscometerone method using a timing device, one using a stroboscope and another using a digital display. (CH-003)
11pp
7pp
2pp
Sets out the alternative procedures for determining the susceptibility of a paint to skinning on storage. (CH-003)
Provides a test procedure for determining the consistency of paints using a specific type of flow cup. (CH-003)
Specifies an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal or plastic substrate when subjected to bending round a cylindrical mandrel under standard conditions. (CH-003)
3pp
AS 1580.214.32003 ViscosityCone-and-plate
7pp
Sets out a procedure for determining the scratch resistance of a dry paint film. (CH-003)
12pp
Describes a procedure for determining the fineness of grind of paints and related materials. (CH-003)
Sets out a method of determining the viscosity of paint samples using the cone-and-plate viscometer at a nominal temperature of 25C. (CH-003)
5pp
5pp
2pp
Sets out a procedure for determining the suitability of a paint for application by brushing. Also provides for the assessment of defects observed during and after application of the paint. (CH-003)
Provides a test procedure for determining the consistency of paints using a rotothinner testing device. (CH-003)
Sets out a method for determining the abrasion resistance of a paint coating or other finishes, such as anodising, electroplating, paper products, rubbers, plastics, textiles, glass and concrete, using an abraser. (CH-003)
3pp
4pp
Sets out the procedure for determining the apparent dynamic viscosity of paints and related liquids using the rotational (Brookfield-type) viscometer. (CH-003)
Sets out a procedure for: (a) testing the compatibility of two or more materials used as a paint system or part thereof, such as primer and undercoat, or primer, undercoat and finishing paint; (b) examining the recoating properties of a material applied over itself; and (c) checking the effect of the underlying coat(s) on the finish of the dry film. (CH-003)
10pp
Provides a test procedure for determining consistency use ISO style flow cups. Identical with ISO 2431:1993. (CH-003)
4pp
Amendment 1 30 March 2006 Sets out a procedure for determining the non-volatile matter by mass of paints and related materials, under specified conditions of time and temperature. (CH-003)
3pp
2pp
Sets out two procedures for assessing qualitatively the adhesion of a coating or coating system of any thickness, to a metal substrate by cutting through the coating in a prescribed manner. (CH-003)
Sets out a procedure for determining whether a particular liquid can be used to thin paints, pastes or powders, without causing curdling, precipitation or separation. (CH-003)
3pp
5pp
2pp
Provides a test method for determining the degree of settling of samples of paint and related materials. (CH-003)
Sets out a method of determining the pigment content of solvent-borne and water-borne paints. It is not suitable for some paints whose resins exist as solventborne emulsions, such as polyvinylidene fluoride (PVDF), or for non-aqueous dispersions (NAD). (CH-003)
Sets out a method for assessing the adhesion of paint coatings to substrates by applying and removing pressure-sensitive adhesive tape over cuts made in the coating. The method is also applicable as a field procedure, when not under the controlled environmental conditions of AS 1580.101.1, however the temperature of the surface needs to be recorded. (CH-003)
3pp
2pp
Specifies a procedure for assessing the ease of manual re-incorporation of paints and related materials. (CH-003)
Sets out a procedure for determining if a paint coating is surface dry by the adherence, or otherwise, of glass beads to the surface. (CH-003)
4pp
6pp
Provides a laboratory or field procedure for quantifying the adhesion of a coating by determining the greatest perpendicular force (in tension) that a given surface area of coating can bear before it is detached. (CH-003)
Sets out a procedure for determining whether the relative dry hiding power of a given sample of paint applied at the specified spreading rate is less than, equal to, or greater than that of a mutually agreed-upon reference. (CH-003)
2pp
2pp
5pp
Describes procedures for the quantitative determination of the opacity (by contrast ratio measurement) of
Sets out a method for determining whether a coating is hard dry by its resistance to sanding with commercially available abrasive paper. (CH-003)
Sets out a method for determining the resistance to mudcracking of an air-dried latex paint film, typically applied at 3050 mm dry film thickness. Also provides a method for evaluating the tendency of paint coatings to crack in locations where there has been an excessive build-up of paint, e.g. in the corner of a room, particularly at ceilings and cornices, which occurs most commonly with flat paints. (CH-003)
34
3pp
Sets out a method for determining the ability of a freshly applied latex paint film, typically applied at 30 to 50 mm dry film thickness, to coalesce at temperatures of 5C to 8C, after a specified drying period at that temperature. (CH-003)
3pp
Specifies a method of determining visible discolouration, including bronzing, of paint test films exposed to weathering. (CH-003)
3pp
Sets out a test for assessing the resistance of a paint system to extremes of temperature and humidity when both the oven and the freezer are at humidity under 5% RH. (CH-003)
6pp
Describes a procedure for determining the metallic zinc content in zinc dust and inorganic zinc silicate paints. (CH-003)
9pp
Specifies a referee method and a production for determining the pH of water-based paints. (CH-003)
3pp
9pp
Sets out a procedure for determining the resistance of a paint coating to solvent or a solvent mixture, by observing its change in appearance and scratch resistance after appropriate immersion in solvent. (CH-003)
3pp
Sets out a method for assessing the resistance of a coating to immersion in boiling water, by determining any change in appearance after the appropriate period of immersion. (CH-003)
13pp
AS/NZS 1580.601.5:1994 ColourCalculation of small colour differences using the CMC equation (BS 6923:1988) 5pp
Provides a method for calculating small colour differences between two specimens of the same material, using the CMC formula devised by the Colour Measurement Committee of the Society of Dyers. Technically identical with and reproduced from BS 6923:1988. (CH-003)
Provides a procedure for determining the durability of an above ground coating system when subjected to natural weathering. (CH-003)
5pp
Sets out a method for determining the resistance of paint films to washing. (CH-003)
AS/NZS 1580.602.2:1995 Measurement of specular gloss of nonmetallic paint films at 20, 60 and 85 (ISO 2813:1994) 8pp
Provides procedures for determining the specular gloss of non-metallic paint films using a glossmeter. Identical with and reproduced from ISO 2813:1994. (CH-003)
1p
Sets out a method for the visual assessment of the general characteristics, including specific defects, of a surface coating. (CH-003)
35
AS 15892001
AS 15892001 Copper and copper alloy waste fittings AS 1597 Precast reinforced concrete box culverts AS 1597.11974 Small culverts (not exceeding 1200 mm width and 900 mm depth) 19pp Obsolescent
Applies to one-piece and two-piece type rectangular culverts used for conveying water not under pressure and for carrying highway vehicle loadings, installed with the top under a height of fill not exceeding 1600 mm inclusive of pavement if any. Materials, dimensions and tolerances, marking, inspection and testing are specified, with test procedures in appendices. (CE-026)
44pp
11pp
Specifies requirements for copper and copper alloy waste fittings for use in plumbing installations and includes traps, gullies, waste outlets, gratings and connectors. (WS-002)
AS/NZS 1591 AcousticsInstrumentation for audiometry AS/NZS 1591.1:1995 Reference zero for the calibration of puretone bone conduction audiometers (ISO 389-3:1994) 10pp
Specifies reference equivalent threshold force levels, essential characteristics of the bone vibrator and levels of masking noise applied to the ear not under test. These are applicable to the calibration of bone vibrators for pure-tone bone conduction audiometry. It is identical with and has been reproduced from ISO 3893:1994. (AV-003)
Specifies the requirements for the design, construction and performance of electrically energized heat alarms, containing both detection and alarm facilities, that are intended for use in conjunction with smoke alarms. (FP-002)
8pp
Amendment 1 5 August 1998 Specifies the requirements for the design and performance of manually operated call points for use in fire detection and alarm systems. (FP-002)
AS 1597.21996 Large culverts (from 1500 mm span and up to and including 4200 mm span and 4200 mm height) 82pp
Specifies requirements for the design, testing, manufacture and installation of precast reinforced concrete rectangular box culverts, for conveying water not under pressure and for carrying roadway and railway loadings. (CE-026)
22pp
Amendment 1 11 December 2001 Specifies design and performance requirements and methods of test for optical beam smoke detectors. (FP-002)
AS/NZS 1591.4:1995 A mechanical coupler for calibration of bone vibrators (IEC 60373 Ed. 2.0 (Bilingual 1990)) 11pp
Specifies requirements for mechanical couplers used for calibrating bone-conduction audiometers and for making measurements on bone vibrators and bone conduction hearing aids in the frequency range from 125 Hz to 8000 Hz inclusive. It is identical with and has been reproduced from IEC 373:1990. (AV-003)
AS 1597.2 Supplement 11997 Large culverts (from 1500 mm span and up to and including 4200 mm span and 4200 mm height)Commentary (Supplement to AS 1597.21996) 31pp
Provides additional information on box culverts design and installation in relation to AS 1597.2. (CE-026)
18pp
20pp
Specifies requirements for hot-rolled steel plate, floor plate, steel and strip rolled on a continuous mill, in thicknesses up to 8 mm for formability and extra formability grades, and up to 16 mm for other grades, and for widths up to 2000 mm. It includes slit material, provided that the parent metal has an as-rolled width of not less than 600 mm. (MT-001)
Specifies requirements for the design and performance of visual warning devices for use in fire detection, warning, control and intercom systems. (FP-002)
AS 15992006 Pressure-sensitive and water activated adhesive tape for packaging and office applications 18pp
Specifies the performance requirements for pressuresensitive adhesive packaging tapes commonly used in packaging, sealing and labelling operations. (PK-025)
14pp
Specifies the design, construction and performance requirements for duct sampling units and their integral or associated smoke detectors. (FP-002)
AS 1600 Medical equipmentConical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment AS 1600.12004 General requirements (ISO 594-1:1986)
7pp
6pp
158pp
Provides requirements and recommendations for the safe storage and handling of LP Gas, in cylinders and bulk tanks. Sets out requirements for design, construction, commissioning and operation of installations for the storage and handling of LP Gas. Separate sections deal with aboveground and underground tanks, piping systems, cylinders and their locations, automotive filling installations, and operations. Appendices cover emergency plans, refuelling, fire protection, leakage testing, hazardous areas, driver instructions and the transport and location of exchange cylinders. (ME-015)
Specifies requirements for conical fittings with a 6% (Luer) taper for use with hypodermic syringes and needles with certain other apparatus for medical use such as transfusion and infusion sets. Covers conical fittings made of rigid and semi-rigid materials and includes test methods for gauging and performance. Excludes provision for more flexible or elastomeric materials. This Standard has been reproduced from, and is idential with, ISO 594-1:1986. (HE-009)
Specifies the design, construction and functional requirements for remote indicators for use with actuating devices. (FP-002)
5pp
Specifies the requirements for the design, construction and performance of in situ testers for point type detectors. (FP-002)
AS 1604 Specification for preservative treatment 11pp AS 1604.12005 Sawn and round timber 35pp
139pp
Provides requirements for the location, construction and operation of installations for the storage and handling of LP Gas. Special requirements for storage in cylinders and tanks, cylinder filling and automotive filling, and their associated operations, are given. (ME-015)
Specifies requirements for conical lock fittings with a 6% (Luer) taper for use with hypodermic syringes and needles and with certain other apparatus for medical use, e.g. transfusion equipment for fittings and semirigid materials, includes test methods. (HE-009)
AS 1603 Automatic fire detection and alarm systems AS 1603.11997 Heat detectors 15pp
Amendment 1 24 July 2006 Amendment 2 19 March 2008 Specifies requirements for preservative-treated sawn and round timber for protection against decay, insect, or marine borer attack for all exposure conditions throughout Australia. (TM-006)
118pp
Amendment 1 5 April 1999 Specifies requirements for the location, design, construction, commissioning and operation of installation for the storage and handling of LP gas. Separate sections deal with above-ground and underground storage tanks, cylinder supply systems, cylinder filling, automotive filling installations and procedures for a wide variety of operations necessary on or in conjunction with an installation. Appendices cover filling levels, markings, safety valves, locations, line identification, leakage testing, hazardous areas, space heaters, decanting procedures, emergency plans, refuelling, fire protection, and driver instruction signs. (ME-015)
Amendment 1 5 August 1998 Specifies requirements for the design, construction and performance of heat detectors as used in automatic fire detection and alarm systems. Includes an indicator visibility test and requirements regarding IP rating for detectors intended for installation in locations where they will be exposed to moisture. (FP-002)
10pp
27pp
Amendment 1 5 August 1998 Specifies the requirements for the design, construction and performance of point type smoke detectors as used in automatic fire detection and alarm systems. (FP-002)
Amendment 1 25 July 2006 Amendment 2 19 March 2008 Provides specification for preservative treatment of reconstituted wood-based product for protection against decay or insect attack. (TM-006)
36
22pp
4pp
Amendment 1 25 July 2006 Amendment 2 19 March 2008 Provides specification for preservative treatment of laminated veneer lumber (LVL) for protection against decay or insect attack. (TM-006)
Sets out requirements for machine-made high alumina refractory bricks and shapes. (MN-007)
AS 1617.42003 Silica
12pp
21pp
Amendment 1 25 July 2006 Amendment 2 19 March 2008 Sets out a specification for preservative treatment of glued laminated timber products. Specifies the preservative penetration pattern and the preservative retention requirements suitable for each hazard class. (TM-006)
Sets out requirements for refractory bricks and shapes having a maximum free quartz content of 5% by mass and produced essentially from silcrete quartzite and ganister. (MN-007)
12pp
AS/NZS 1605 Methods for sampling and analysing timber preservatives and preservative-treated timber AS/NZS 1605.1:2006 General requirements, sampling, and determination of sapwood and heartwood presence 12pp
Specifies general requirements for sampling and analysing timber preservatives and preservative-treated timber, and sets out the method for determining the presence of sapwood and heartwood. (TM-006)
AS 16311994 Cast grey and ductile iron non-pressure pipes and fittings 20pp
Specifies performance and general requirements for grey and ductile cast iron pipes and fittings up to nominal size DN 300 intended to be used where internal working pressure is considered negligible. An Appendix illustrates preferred designs of pipe fittings. (WS-005)
AS 1627 Metal finishingPreparation and pretreatment of surfaces AS 1627.01997 Method selection guide 11pp
AS 1636 TractorsRoll-over protective structures Criteria and tests AS 1636.11996 Conventional tractors (ISO 3463:1989, ISO 3471-1, ISO 5700:1989, SAE J1040, SAE J1194, SAE J2194) 34pp
Specifies the test procedures and minimum performance criteria for evaluating roll-over protective structures fitted to tractors having a rear track width generally greater than 1150 mm. It applies to drivercontrolled tractors, but does not cover earth-moving equipment. It includes test procedures for both static and dynamic testing. A theoretical analysis of rollover protective structures, which would provide equivalent performance to physical testing, is included. (ME-065)
Gives guidance for the selection and application of the other parts of AS 1627, which cover methods for the preparation and pretreatment of metal surfaces prior to the application of a protective coating. (MT-009)
AS/NZS 1605.4:2006 Analysis methods for determination of preservative solution concentration 49pp
Specifies the analysis methods for determination of preservative solution concentration. (TM-006)
4pp
AS 16091981 Eye protectors for motor cyclists and racing car drivers 12pp
Amendment 1 8 September 1982 Specifies material, optical quality and mechanical strength. Provision is made for the limited use of tinted lenses. Test methods are in appendices. (CS-076)
Describes methods for hand tool and power tool cleaning of steel substrates before application of paints and related products. It applies both to new steelwork and to steel surfaces that have been coated previously and that show areas of breakdown requiring maintenance painting. It describes the equipment to be used and the procedure to be followed. This Standard is identical with and has been reproduced from ISO 8504-3:1993. (MT-009)
27pp
9pp
Specifies abrasive blastcleaning methods for the preparation of steel surfaces before coating with paints and related products. (MT-009)
Specifies designations and sizes for trimmed writing paper and untrimmed paper, as well as the method of expressing of dimensions. This Standard is based on, but not equivalent to, and reproduced from ISO 216:1975 and ISO 217:1995. It also contains excerpts from ISO 353:1975. (IT-018)
AS 1627.52003 Pickling
20pp
Specifies procedures for preparing metal surfaces by immersion or by other means, employing chemical solutions to remove oxidation products (scale), corrosion products and related foreign materials. (MT-009)
1p
Specifies colours for marking stress-graded timber to indicate grade. It includes colours for F grades and for MGP grades. The colours are indicated by reference to AS2700. (TM-003)
20pp
Specifies the minimum requirements for the type approval based on performance testing of light aluminium alloy and magnesium alloy road wheels for vehicles with a gross mass not exceeding 3.5 t. (MT-003)
Sets out requirements for machine-made fireclay refractory bricks and shapes. (MN-007)
AS 1627.92002 Pictorial surface preparation standards for painting steel surfaces 2pp
(MT-009)
AS 1617.22003 Insulating
3pp
Sets out requirements for machine-made insulating refractory bricks produced from clays, diatomaceous earth, exfoliated vermiculite, expanded fireclay grog, bubble alumina, perlite or other suitable materials. (MN-007)
AS 1627.91989 Pictorial surface preparation standards for painting steel surfaces (ISO 8501-1:1988) 11pp Available Superseded
Using colour photographs, the Standard describes four grades of rust for steel surfaces, and a number of preparation grades achievable when preparing a sur-
AS 16391990 The design and installation of corrugated fibre-reinforced cement roofing and wall cladding 10pp Available Superseded
Amendment 1 13 May 1991 Specifies requirements for materials, design and installation of corrugated fibre-reinforced cement roofing and cladding. All references to asbestos cement have been deleted and the scope has been extended to include cladding for walls and test requirements for resistance to wind loads. (BD-040)
37
AS EN 16402002
AS EN 16402002 DentistryMedical devices for dentistry Equipment (EN 1640:1996) 10pp
Specifies requirements for items of dental equipment used in the practice of dentistry and which are medical devices. These include requirements for intended performance, design attributes, components, packaging, marking, labelling and information supplied by the manufacturer. (HE-004) from the information given in AS 1654.1. Graphical representations of tolerance zones for holes and shafts are given in the Annex. Identical with and reproduced from ISO 286-2:1988. (ME-027)
6pp
Amendment 1 5 April 1998 Sets out methods of testing complete cable and cord. (EL-003)
5pp
9pp
Specifies certain aspects of design, accuracy requirements, material and testing, protection against climatic conditions, marking and ordering, and covers blade thicknesses from 0.03 to 1 mm. Provision is made for the blades to be supplied individually or assembled in a protective sheath; four varieties of assembled series are recommended. (ME-027)
Specifies requirements for materials used in the practice of dentistry for the restoration of the form and function of the dentition and which are medical devices. These include requirements for intended performance, design attributes, components, packaging, marking, labelling and information supplied by the manufacturer. (HE-004)
AS 16571992 Fixed platforms, walkways, stairways and laddersDesign, construction and installation 27pp
Specifies requirements for the design, construction and installation of fixed means of access to, and safe working at places normally used by operating, inspection, maintenance and servicing personnel. Included in Appendices are methods for testing guardrails and posts, as well as typical component dimensions and spacings for guardrailing. (SF-013)
AS/NZS 1660.5.1:2005 Fire testsTest for vertical flame spread of vertically-mounted bunched wires or cables (IEC 60332-3-10 Ed. 1.0 (Bilingual 2000), IEC 60332-3-21 Ed. 1.0 (Bilingual 2000), IEC 60332-3-22 Ed. 1.0 (Bilingual 2000), IEC 60332-3-23 Ed. 1.0 (Bilingual 2000), IEC 60332-3-24 Ed. 1.0 (Bilingual 20) 39pp
Specifies methods of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. The test is intended for type approval testing and various test categories are proposed. (EL-003)
8pp
Specifies requirements for dental implants, including requirements for intended performance, design attributes, components, packaging, marking, labelling and information supplied by the manfacturer. (HE-004)
AS/NZS 1660 Test methods for electric cables, cords and conductors AS/NZS 1660.1:1998 Conductors and metallic components 7pp
Sets out the methods of testing conductors, metallic sheath and armour for insulated electric cables and flexible cords. (EL-003)
AS/NZS 1660.5.2:2006 Fire testsMeasurement of smoke density of cables burning under defined conditions (IEC 61034-1 Ed. 3.0 (Bilingual 2005), IEC 61034-2 Ed. 3.0 (Bilingual 2005)) 16pp
Specifies the test procedure for the measurement of the density of the smoke emitted from electric or optical fibre cables burning under defined conditions. (EL-003)
AS 1647 Children's toys (Safety requirements) AS 1647.21992 Constructional requirements Available Superseded 73pp
AS/NZS 1660.2.1:1998 Insulation, extruded semi-conductive screens and non-metallic sheaths Methods for general application 20pp
Amendment 1 23 February 2001 Sets out the methods of testing insulation, extruded semi-conductive screens and non-metallic sheaths for general application to insulated electric cables. (EL-003)
AS/NZS 1660.5.3:1998 Fire TestsDetermination of the amount of halogen acid gas evolved during the combustion of polymeric materials taken from cables 10pp
Specifies a procedure for the determination of the amount of halogen acid gas, other than hydrofluoric acid, evolved during the combustion of compounds based on halogenated polymers and compounds containing halogenated additives taken from cable constructions. (EL-003)
Amendment 1 5 March 1995 Specifies in two broad groups various hazards associated with constructional aspects of toys intended for use by children up to the age of 14 years. The first group of hazards is applicable to all toys (e.g. sharp edges, sharp points, pinch of crush hazard). The second group of hazards relates to specific toys which, because of their design or their traditional play modes, present a particular hazard (e.g. ingestion or inhalation hazard of small toys particularly if handled by a child aged less than three years; puncture hazard resulting from being struck by a projectile toy such as a toy dart). In addition to a series of normal use and reasonably forseeable abuse tests, the Standard specifies a number of tests for specific toys (e.g. rattlers, teethers, projectile toys). Labelling requirements and age suitability gradings are also specified. (CS-018)
AS/NZS 1660.2.2:1998 Insulation, extruded semi-conductive screens and non-metallic sheaths Methods specific to elastomeric, XLPE and XLPVC materials 9pp
Amendment 1 24 July 2001 Sets out the methods of testing insulation, extruded semi-conductive screens and non-metallic sheaths of elastomeric, XLPE and XLPVC insulated electric cables. (EL-003)
AS/NZS 1660.5.4:1998 Fire testsDetermination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity 10pp
Specifies a procedure for the determination of the degree of acidity of gases evolved during the combustion of compounds taken from the components of electrical or optical cables. (EL-003)
AS 16492001 TimberMethods of test for mechanical fasteners and connectorsBasic working loads and characteristic strengths 31pp
Specifies test methods and calculations used to establish basic working loads and characteristics strengths for specific mechanical fasteners and connectors for use in designing timber structures. Also sets out methods for establishing values for a particular fastener when used with timber of a particular joint group. Appendix A gives recommendations on species for joint group testing. (TM-001)
AS/NZS 1660.2.3:1998 Insulation, extruded semi-conductive screens and non-metallic sheaths Methods specific to PVC and halogen free thermoplastic materials 15pp
Amendment 1 16 June 2000 Sets out the methods of testing insulation, nonmetallic sheaths for PVC and halogen free thermoplastic insulated electric cables. (EL-003)
AS/NZS 1660.5.5:2005 Fire testsCircuit integrity (IEC 60331-11 Ed. 1.0 (Bilingual 1999), IEC 60331-12 Ed. 1.0 (Bilingual 2002), IEC 60331-21 Ed. 1.0 (Bilingual 1999), IEC 60331-23 Ed. 1.0 (Bilingual 1999), IEC 60331-25 Ed. 1.0 (Bilingual 1999), IEC 6) 38pp
Specifies the apparatus, procedures and performance requirements to be used for testing cables required to maintain circuit integrity when subjected to fire under specified conditions. (EL-003)
AS 1654 ISO system of limits and fits AS 1654.11995 Bases of tolerances, deviations and fits (ISO 286-1:1988) 30pp
Provides the bases for a system of tolerances and deviations suitable for plain workpieces, and fits between mating cylindrical features or fits between workpieces having features with parallel faces such as the fit between a key and a keyway. Annexes give the basic equations and rules for establishing the system, examples of the use of the system and equivalent terms used in the Standard in eight languages. Identical with and reproduced from ISO 286-1:1988. (ME-027)
AS/NZS 1660.2.4:1998 Insulation, extruded semi-conductive screens and non-metallic sheaths Methods specific to polyethylene and polypropylene materials 15pp
Amendment 1 24 July 2001 Sets out the methods of testing insulation, extruded semi-conductive screens and non-metallic sheaths for polyethylene and polypropylene insulated electric cables. (EL-003)
AS/NZS 1660.5.6:2005 Fire testsTest for vertical flame propagation for a single insulated wire or cable (IEC 60332-1-1 Ed. 1.0 (Bilingual 2004), IEC 60332-1-2 Ed. 1.0 (Bilingual 2004), IEC 60332-1-3 Ed. 1.0 (Bilingual 2004)) 11pp
Specifies a method of test for the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical cable under fire conditions. (EL-003)
AS/NZS 1660.2.5:1998 Insulation, extruded semi-conductive screens and non-metallic sheaths Methods specific to cables above 1 kV 4pp
Amendment 1 23 February 2001 Amendment 2 24 July 2001 Sets out the methods of testing insulation, extruded semi-conductive screens and non-metallic sheaths for insulated electric cables above 1 kV. (EL-003)
AS/NZS 1664 Aluminium structures AS/NZS 1664.1:1997 Limit state design 74pp
AS 1654.21995 Tables of standard tolerance grades and limit deviations for holes and shafts (ISO 286-2:1988) 43pp
Gives values of the limit deviations for commonly used tolerance class for holes and shafts calculated
Amendment 1 5 January 1999 Specifies requirements for the design of aluminium building type structural load-carrying members and elements using the limit state design criteria (LSD). (BD-050)
22pp
Amendment 1 23 February 2001 Sets out electrical tests for component parts and complete cables, cords and conductors. (EL-003)
38
AS 1668.2 Supplement 12002 Ventilation design for indoor air contaminant control (Supplement to AS 1668.2 2002) 41pp
Provides background and other information on AS 1668.2 to support the Standard and to assist users in its correct application. (ME-062)
Specifies the design, installation and commissioning of automatic fire detection and alarm systems. Provides the user with in-depth information on distributed systems, revised spacing parameters, revised and expanded installation requirements and revised drawings utilizing the ISO based symbols. (FP-002)
75pp
Amendment 1 5 January 1999 Specifies requirements for the design of aluminium alloy load-carrying members using the allowable stress design criteria (ASD). (BD-050)
AS 1668.21991 Mechanical ventilation for acceptable indoor-air quality 74pp Available Superseded
Sets out the requirements for air handling systems which ventilate enclosures by mechanical means. It sets minimum requirements for preventing an excess accumulation of airborne contaminants, or objectionable odours. It does not prescribe other requirements associated with comfort such as temperature, humidity, air movement or noise. The Standard also includes requirements for natural ventilation at carparks. Road tunnels are not addressed in this Standard. (ME-062)
16pp
AS/NZS 1664.2 Supplement 1:1997 Allowable stress designCommentary (Supplement to AS/NZS 1664.2:1997) 33pp
Amendment 1 5 January 1999 Provides additional information on allowable stress design of aluminium structures, in relation to AS/NZS 1664.2:1997. (BD-050)
Specifies requirements for the design, installation and commissioning of local alarm systems used for early warning fire detection and life safety in situations where there is no legislative requirement for a system, no monitoring station connection requirement, or no monitoring facility available. (FP-002)
9pp
48pp
Specifies the requirements for the welding of aluminium and its weldable alloys in structures, components and equipment complying with AS/NZS 1664.1 or AS/NZS 1664.2, by gas tungsten-arc welding (GTAW), gas metalarc welding (GMAW), pulsed-arc wleding (GTAW or GMAW) and plasma-arc welding (PAW) processes. (WD-003)
AS 1668.2 Supplement 11991 Mechanical ventilation for acceptable indoor-air qualityCommentary (Supplement to AS 1668.21991) 24pp Available Superseded
Provides guidance on the application of the Code by explaining the intent of those clauses which could be the subject of requests for interpretation. (ME-062)
Specifies requirements for the connection between the monitored fire alarm system and the fire dispatch centre and includes the requirements for the monitoring equipment. (FP-002)
7pp
Specifies the performance requirements for fire alarm monitoring networks using the telecommunications protocol defined in AS 4418.2. (FP-002)
AS 1668.32001 Smoke control systems for large single compartments or smoke reservoirs 82pp
This Standard sets minimum requirements for the design of smoke control systems in large single compartments in which smoke accumulates in a smoke reservoir. It sets minimum requirements considered necessary to meet the system design objectives in terms of continuous operation over a specified time period under a specified fire condition. The design information given in this Standard is based on axisymmetric plumes. Compartments and smoke reservoirs are designed separately and spill plumes between compartments/reservoirs are not considered. Application of this Standard is not appropriate in situations where a stable buoyant hot layer does not exist. (ME-062)
AS 1670.42004 Sound systems and intercom systems for emergency purposes 34pp
Specifies requirements for the design, installation and commissioning of the components of sound systems and intercom systems for emergency purposes. (FP-002)
Specifies requirements for wire-rope slings, including grommets and wire-rope sling assemblies, for general conditions of use. They consist of steel-wire rope and often include end terminations, such as ferrule-secured eyes, poured sockets or swage fittings. Guidance on information that should be supplied with enquiries and orders is given in an Appendix. (ME-025)
15pp
Specifies the requirements for the installation and commissioning of smoke alarms complying with the requirements of AS 3786. (FP-002)
AS 1671 Lead and lead alloys AS 1671.11987 Determination of antimony contentFlame atomic absorption spectrometric method 3pp
Sets out a flame atomic absorption spectrometric method for the determination of antimony in lead alloys in the concentration range 0.1 to 3.5% antimony. The method is suitable in the presence of up to 2.5% tin and 2.5% arsenic. This Standard is a new edition of AS 1671.11974 without technical alterations. (CH-010)
19pp
Sets out recommended practices for the care and use of wire-rope slings under general conditions of use. (ME-025)
AS/NZS 1668 Set:2005 The use of Ventilation and Air-conditioning in buildings Set AS/NZS 1668 The use of ventilation and airconditioning in buildings AS/NZS 1668.1:1998 Fire and smoke control in multicompartment buildings
AS 16701986 Automatic fire detection and alarm systems System design, installation, and commissioning 38pp Available Superseded
Amendment 2 7 March 1988 Amendment 3 17 June 1988 Amendment 1 5 June 1997 Specifies requirements for the design, installation, and commissioning of automatic fire detection systems. Definitions, general requirements applicable to all systems, and specific requirements for heat detection, smoke detection, and flame detection systems are given. Appendices set out recommendations on the selection of types of thermal detectors and on the application of smoke and flame detectors, together with a standard form of installer's statement for a fire alarm system, fire alarm symbols, and commissioning test report. (FP-002)
110pp
Amendment 1 22 November 2002 Sets out the minimum requirements for the design, construction, installation and commissioning of mechanical and airconditioning systems for fire and smoke control in multi-compartment buildings. Five specific methods of smoke control are defined and the appropriate requirements specified for each. This Standard does not include requirements for smoke control systems utilizing exhaust from above the hot layer. The Standard does not include requirements for maintenance of smoke control systems. (ME-062)
AS 1671.21987 Determination of low concentrations of antimony in lead alloys containing not more than 2.5% arsenic and 0.10% copperTitrimetric method 4pp
Sets out a titrimetric method for the determination of antimony content in the range 0.1 to 3% in lead alloys containing less than 2.5% arsenic and 0.10% copper. This Standard is a new edition of AS 1671.21975 without major technical alterations. (CH-010)
53pp
Sets out the requirements for those aspects of design, construction, installation and operation of air-handling systems with a view to minimizing the spread of smoke and fire through buildings by way of the airhandling systems. (ME-062)
AS 1670 Fire detection, warning, control and intercom systemsSystem design, installation and commissioning AS 1670.12004 Fire 79pp
AS 1671.31987 Determination of high concentrations of antimony in lead alloys containing not more than 2.5% arsenic and 1% copper Titrimetric method 5pp
Sets out a titrimetric method for the determination of antimony in lead alloys containing less than 2.5% arsenic and 1.0% copper. The method which is a revision of AS 1671.31975, is applicable to antimony contents in the range 2 to 27%. (CH-010)
Amendment 1 25 November 2005 Specifies requirements for the design, installation and commissioning of fire detection and alarm systems. (FP-002)
AS 1671.41988 Determination of tin in antimonial lead Flame atomic absorption spectrometric method 3pp
Sets out a flame atomic absorption spectrometric method for the determination of tin in antimonial lead in the range 0.01 to 0.05% in the presence of up to 1% antimony. (CH-010)
65pp
39
AS 1672.11997
AS 1672 Limes and limestones AS 1672.11997 Limes for building 6pp AS 1678.0.0.0012004 Vehicle fire AS 1678.6.0.0061998 Toluene diisocyanate (TDI) AS 1678.6.0.0091998 Cyanides, inorganic AS 1678.6.0.0101998 Phenylmercuric compounds AS 1678.6.0.0111998 Copper-chrome-arsenic AS 1678.6.0.0131998 Chloropicrin AS 1678.6.0.0141998 Lead arsenates, lead arsenites
2pp
2pp
(CH-009)
Specifies requirements for the specification of quicklime and hydrated lime intended for use in building. (BD-027)
Recommends emergency procedures to be followed in the event of a fire initiating in the vehicle itself or in any non-dangerous goods included in the load. (CH-009)
2pp
(CH-009)
AS 1674 Set2007 Safety in welding and allied processes Set 68pp AS 1674 Safety in welding and allied processes AS 1674.11997 Fire precautions 19pp
2pp
(CH-009)
2pp
(CH-009)
2pp
(CH-009)
2pp
(CH-009)
2pp
(CH-009)
Specifies precautions to be taken prior to and during hot work (including welding and allied processes), to prevent the possibility of fire or explosion, which may result in harm to persons or property. In particular, such precautions apply to hot work during manufacturing, construction, maintenance, repairs, demolition and where plant or equipment has contained flammable, combustible or explosive material. Measures for the protection of operators against electric shock, asphyxiation, poisoning and other hazards are not covered by this Standard, which also does not deal with protective clothing. Although primarily oriented to hot work that is related to welding and allied processes, this Standard can generally be applied to other forms of ignition sources in hazardous areas. (WD-004)
2pp
(CH-009)
2pp
(CH-009)
2pp
Revises the Emergency Procedure Guide for chlorine in accordance with the 6th edition of the Australian Dangerous Goods Code (ADG Code). Provides guidance to drivers, emergency services and others dealing with emergencies involving the transport of dangerous goods. (CH-009)
2pp
(CH-009)
AS 1674.22007 Electrical
2pp
36pp
(CH-009)
2pp
(CH-009)
Specifies safety requirements for arc welding and allied processes, to prevent electric shock and minimize associated hazards, describes practices and safeguards that should be adopted by welders (including requirements for cable connections for alternating and direct current power sources, and requirements for any ancillary equipment) and gives examples of ways that shocks have been received and actions that may be taken in the event of a welder receiving an electric shock. (EL-019)
AS 1678.3.0.0222003 Acrylonitrile (inhibited) AS 1678.3.1.0012003 Petrol (as cargo) AS 1678.3.1.0031998 Carbon disulfide AS 1678.3.2.0012003 Toluene AS 1678.3.2.0021998 Xylenes
2pp
(CH-009)
2pp
(CH-009)
2pp
(CH-009)
2pp
(CH-009)
AS 1678.6.1.0171998 Cadmium compound AS 1678.8.0.0012003 Hydrochloric acid AS 1678.8.0.0042003 Hypochlorite solution AS 1678.8.0.0052004 Acetic anhydride AS 1678.8.0.0081998 Hydrofluoric acid
2pp
(CH-009)
2pp
(CH-009)
2pp
(CH-009)
2pp
(CH-009)
2pp
(CH-009)
Amendment 1 12 July 2002 Specifies a simple means of referring to common refrigerants instead of using the chemical name, formula, or trade name. It also establishes a uniform system to be used in assigning the proper reference number and classification to refrigerants. The system for refrigerants classification is defined and physical data of common refrigerants listed. (ME-006)
2pp
(CH-009)
AS 1678.4.3.0021998 Magnesium phosphide AS 1678.5.1.0021998 Ammonium nitrate AS 1678.5.1.0042005 Calcium hypochlorite AS 1678.5.1.0052003 Hydrogen peroxide, aqueous solution
2pp
(CH-009)
2pp
(CH-009)
2pp
(CH-009)
AS 1678.8.0.0092003 Formaldehyde solution (with not less than 25% formaldehyde) 2pp
(CH-009)
2pp
(CH-009)
2pp
2pp
(CH-009)
AS 1678.6.0.0011998 Aniline AS 1678.6.0.0021998 Sodium cyanide, potassium cyanide AS 1678.6.0.0041998 Phenol, cresols and cresylic acid
Quick reference card for retention in vehicles and by Emergency services, to be used where road-transport vehicles are involved in accidents, spills or leaks, or fire. Information on hazards, emergency procedures and first aid are given. (CH-009)
2pp
(CH-009)
AS 1678.10.0011998 Pesticides
2pp
(CH-009)
2pp
(CH-009)
AS 1678.2A12004 Group text EPG for Class 2 substances Flammable, compressed gas 40pp
(CH-009)
2pp
(CH-009)
40
AS 1678.2D11998 Group text EPGs for Class 2 substances Compressed and liquefied gases Aerosols 40pp
Revises the Group Text EPG for aerosols in accordance with the 6th edition of the Australian Code for the Transport of Dangerous Goods by Road and Rail (ADG Code). Provides guidance for drivers, emergency services, and others, in dealing with emergencies involving the transport of aerosols. (CH-009)
Sets out minimum requirements for electric lighting systems within publicly accessible areas of buildings so as to provide visual conditions that facilitate the safe movement of people in the normal use of the building. Does not include lighting requirements for specific work tasks. (LG-001)
23pp
AS 1678.2M12004 Group text EPGs for Class 2 substances Compressed and liquefied gasesMixed load of gases in cylinders 40pp
(CH-009)
Sets out recommendations for the lighting of interiors of buildings which provide facilities for structured learning or training programmes at all levels, from pre-school to tertiary and adult education centres. It is intended to be read in conjunction with the general recommendations of AS 1680.1. (LG-001)
AS 1678.3A12004 Group text EPGs for Class 3 substances Flammable liquids 40pp
(CH-009)
48pp
AS 1678.3C12004 Group text EPGs for Class 3 substances Flammable liquids of a lesser hazard 40pp
(CH-009)
Amendment 1 5 September 1998 Sets out recommendations for the lighting of industrial tasks and processes with a view to providing visual environments in which such tasks and processes may be safely and efficiently performed. It is intended to be read in conjunction with the general recommendations of AS 1680.1. (LG-001)
37pp
AS 1678.4A12004 Group text EPG for Class 4.1 substances Flammable solids; substances liable to spontaneous combustion; and substances that in contact with water emit flammable gases 40pp
(CH-009)
Sets out recommendations for the lighting of a variety of tasks carried out within hospitals and medical facilities, particularly tasks associated with clinical observation, treatment and care. It is intended to be read in conjunction with the general recommendations of AS 1680.1. (LG-001)
AS 1678.5A12006 Group text EPG for Class 5 substances Oxidizing agents 40pp
(CH-009)
AS 1680.2.01990 Recommendations for specific tasks and interiors 16pp Available Superseded
Amendment 1 21 December 1992 Sets out certain quantitative recommendations for the lighting of specific tasks and interiors, in particular, recommendations for maintenance illuminance and maximum glare index. Intended for use in conjunction with AS 1680.1 until applicable recommendations in the AS 1680.2 series are published. (LG-001)
AS 1678.5K12006 Group text EPGs for Class 5 substances Organic peroxides 40pp
Provides guidance for drivers, emergency services and others involved in the transport of dangerous goods, in dealing safely with emergency situations during the transport of oxidizing substances or organic peroxides. (CH-009)
AS/NZS 1680.2.1:2008 Specific applicationsCirculation spaces and other general areas 19pp
This Standard sets out recommendations for the lighting of circulation spaces and other areas which commonly occur in buildings of various types. It contains material that adds to or amends the recommendations in AS/NZS 1680.1:2006 and is intended to be read in conjunction with that Standard and with any applicable specific recommendations in other Standards in the AS/NZS 1680 series. The use of this Standard without reference to AS/NZS 1680.1:2006 is a misapplication of the Standard. (LG-001)
AS 1678.5Q12006 Group text EPGs for Class 5 substances Organic peroxides, temperature controlled 40pp
Provides drivers, emergency services and others involved in the transport of dangerous goods, in dealing safely with emergency situations during the transport of oxidizing substances or organic peroxides. (CH-009)
AS 1678.8A12004 Group text EPGs for Class 8 substances Corrosive substances 40pp
(CH-009)
AS 1680.2.11993 Circulation spaces and other general areas 13pp Available Superseded
Sets out recommendations for the lighting of circulation spaces and other areas which commonly occur in buildings of various types. It is intended to be read in conjunction with the general recommendations of AS 1680.1. (LG-001)
AS 16812002 Safety requirements for electrically heated Type 1 ovens in which flammable volatiles can occur 27pp
Specifies requirements for the design, construction and safe operation of ovens for use at a maximum temperature of 540C in which there may be an explosion hazard due to the presence of flammable volatiles. Appendices provide combustion characteristics for common flammable liquids, methods for calculation of ventilation and illustrate an oven safety design form. (EL-014)
AS 1679 Reusable all-glass or metal-and-glass syringes for medical use AS 1679.12005 Dimensions (ISO 595-1:1986)
Adopts ISO595-1:1996 to specify dimension for the reusable all-glass or metal-and-glass syringes for medical use, with a graduated capacity from 1 to 100mL. Also specifies requirements for the graduated capacity of syringes. (HE-009)
26pp
Sets out the requirements for the design, manufacture, performance testing and marking of fire dampers whose purpose is to protect ventilation openings in fire-resistant elements of construction. (ME-062)
Sets out recommendations for the lighting of offices and related work areas, and locations within other workplaces where screen-based tasks are performed. It is intended to be read in conjunction with the general recommendations of AS 1680.1. (LG-001)
AS 1682.21990 Installation
7pp
Sets out the requirements for installation of fire dampers (and smoke dampers) in fire-resistant elements of construction. (ME-062)
41
AS 1683.12002
AS 1683 Methods of test for elastomers AS 1683.12002 Rubber latexSampling (ISO 123:2001) (ISO 34-1:1994, ISO 34-1:1994/Cor 1:1999) 12pp
Specifies three methods for the determination of the tear strength of vulcanized or thermoplastic rubber. This Standard is identical with and has been reproduced from ISO 34-1:1994. (RU-003)
8pp
AS 1683.182001 Determination of flex cracking and crack growth of vulcanized or thermoplastic rubber (De Mattia) (ISO 132:1999) 7pp
Specifies a method for use in comparing the resistance of rubbers to the formation of growth cracks. This Standard is identical with and has been reproduced from ISO 132:1999. (RU-003)
Specifies procedures for sampling natural rubber latex and for sampling synthetic rubber latices and artificial latices. This Standard is identical with and has been reproduced from ISO 123:2001. (RU-003)
AS 1683.14.12001 Adhesive strength of vulcanized or thermoplastic rubberOne-plate method (ISO 813:1997) 7pp
Specifies a method for the determination of the adhesion strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate. This Standard is identical with and has been reproduced from ISO 813:1997. (RU-003)
AS 1683.192001 Preparation, mixing and vulcanization of rubber test mixesEquipment and procedures (ISO 2393:1994) 9pp
Specifies the equipment and procedures for the peparation, mixing and vulcanization of rubber test mixes. This Standard is identical with and has been reproduced from ISO 2393:1994. (RU-003)
AS 1683.32001 Latex, rubber, natural concentrate Determination of dry rubber content (ISO 126:1995)
3pp
Specifies a method for the determination of the dry rubber content of natural rubber latex concentrate. This Standard is identical with and has been reproduced from ISO 126:1995. (RU-003)
AS 1683.14.22001 Adhesive strength of vulcanized or thermoplastic rubberTwo-plate method (ISO 814:1996) 4pp
Specifies a method for the determination of the adhesion strength of rubber-metal bonds where the rubber part is assembled between two parrallel metal plates. This Standard is identical with and has been reproduced from ISO 814:1996. (RU-003)
AS 1683.202001 Standard temperatures, humidities and times for conditioing and testing (ISO 471:1995) 3pp
Specifies the temperature, humidity and time conditions used for the conditioing and testing of all types of rubber test pieces. This Standard is identical with and has been reproduced from ISO 471:1995. (RU-003)
14pp
Specifies methods for the determination of the international rubber hardness of vulcanized or thermoplastic rubbers on flat surfaces and the apparent hardness on curved surfaces. This Standard is identical to and has been reproduced from ISO 48:1994. (RU-003)
AS 1683 (Pt 5 to 6)1974 Methods of test for elastomersFirst Group: Methods 5, 6 20pp AS 1683.51974 Coagulum content of rubber latices (ISO 706)
(RU-003)
AS 1683.222001 Determination of vulcaniztion characteristics using the oscillating disc curemeter (ISO 3417:1991) 12pp
Specifies a method for determining selected vulcanizing characteristics of a rubber compound by means of the oscillating disc curemeter. This Standard is identical with and has been reproduced from ISO 3417:1991. (RU-003)
5pp
Sets out the procedure for determining durometer hardness of elastomeric materials. (RU-003)
AS 1683.61974 Volatile fatty acid number of natural rubber latex (ISO 506)
This method determines the volatile fatty acid number of natural rubber latex which contains preservative agents and which has been submitted to some type of concentration process. The method is not necessarily suitable for latices from natural sources other than Havea brasiliensis, and is not applicable to compounded latex, latex, vulcanized latex, artificial dispersions of rubber or synthetic rubber latices. (RU-003)
AS 1683.16.12001 Determinations using a shearing-disc viscometerDetermination of Mooney viscosity (ISO 289-1:1994) 9pp
Specifies a method of use of a shearing-disc viscometer for measuring of uncompounded or compounded rubbers. This Standard is identical with and has been reproduced from ISO 289-1:1994. (RU-003)
AS 1683.16.22001 Determinations using a shearing-disc viscometerDetermination of prevulcanizing characteristics (ISO 289-2:1994) 3pp
Specifies a method for determining the prevulcanizing characteristics of compounded rubber. This Standard is identical with and has been reproduced from ISO 289-2:1994. (RU-003)
AS 1683.242001 Determination of the resistance of vulcanized or thermoplastic rubbers to ozone crackingStatic strain test (ISO 1431-1:1989) 7pp
Specifies a method to estimate the resistance of vulcanized or thermoplastic rubbers to cracking when exposed, under static tencile strain, to air containing ozone. This Standard is identical with and has been reproduced from ISO 1431-1:1989. (RU-003)
AS 1683.91992 Rubber, vulcanized or thermoplastic Determination of tension set at normal and high temperatures (ISO 2285:1988) 4pp
Specifies a method for determining the tension set characteristics of vulcanized or thermoplastic rubbers. Apparatus, dimensions, preparation, conditioning, marking, and time-interval between vulcanization and testing of test pieces, procedure, strain, duration of test and temperature, expression of results and test report are laid down. This Standard is identical with and reproduced from ISO 2285:1988. (RU-003)
AS 1683.16.32001 Determinations using a shearing-disc viscometerDetermination of the Delta Mooney value for non-pigmented oil extended, emulsion-polymerized styrenebutadiene rubber (ISO 289-3:1999) 3pp
Specifies a method for determining the Delta Mooney value of a non-pigmented, oil-extended, emulsionpolymerized styrene-butadine rubber. This Standard is identical with and has been reproduced from ISO 2891:1994. (RU-003)
AS 1683.252001 Determination of the resistance of vulcanized or thermoplastic rubbers to ozone crackingDynamic strain test (ISO 1431-2:1994) 8pp
Specifies a method to estimate the resistance of vulcanized or thermoplastic rubbers to cracking when exposed, under static tensile strain, to air containing ozone. This Standard is identical with and has been reproduced from ISO 1431-2:1994. (RU-003)
AS 1683.172001 Determination of carbon black content of vulcanized rubberPyrolytic and chemical degradation methods (ISO 1408:1995) 8pp
Specifies a pyrolytic and two chemical degradation methods for the determination of the carbon content of rubber. This Standard is identical with and has been reproduced from ISO 1408:1995. (RU-003)
AS 1683.262001 Rubber, vulcanizedor thermoplastic Accelerated ageing and heat resistance tests (ISO 188:1998) 9pp
Specifies accelerated ageing or heat-resistance tests on vulcanized or thermoplastic rubbers. This Standard is identical with and has been reproduced from ISO 188:1998. (RU-003)
AS 1683.122001 Rubber, vulcanized or thermoplastic Determination of tear strength (trouser, angle and crescent test pieces)
42
Amendment 1 26 February 2002 Sets out design methods, assumptions and other criteria used in the preparation of the span tables, uplift forces and racking pressures contained within Parts 2, 3 and 4 of the AS 1684 series. It applies to the preparation of design data for residential timber-framed construction where the loading and performance requirements correspond to those for Class 1 and Class 10 buildings as defined by the Building Code of Australia. (TM-001)
AS 1684.2 N3 Supplement 42006 Non-cyclonic areasN3 Supplement 4: Timber framing span tablesWind classification N3Seasoned softwoodStress Grade MGP10 (Supplement to AS 1684.2 2006) 52pp
(TM-002)
AS 1684.2 N1/N2 Supplement 92006 Non-cyclonic areasN1/N2 Supplement 9: Timber framing span tablesWind classification N1/N2Seasoned hardwood Stress Grade F27 (Supplement to AS 1684.22006) 52pp
(TM-002)
AS 1684.2 N3 Supplement 52006 Non-cyclonic areasN3 Supplement 5: Timber framing span tablesWind classification N3Seasoned softwoodStress Grade MGP12 (Supplement to AS 1684.2 2006) 52pp
(TM-002)
251pp
Amendment 1 16 November 2006 Specifies requirements for building practice and for the selection, placement and fixing of the various structural elements used in the construction of timberframed Class 1 and Class 10 buildings, as defined in the Building Code of Australia, for non-cyclonic areas. (TM-002)
AS 1684.2 N1/N2 Supplement 102006 Non-cyclonic areasN1/N2 Supplement 10: Timber framing span tablesWind classification N1/N2Unseasoned softwoodStress Grade F5 (Supplement to AS1684.22006) 54pp
(TM-002)
AS 1684.2 N3 Supplement 62006 Non-cyclonic areasN3 Supplement 6: Timber framing span tablesWind classification N3Seasoned softwoodStress Grade MGP 15 (Supplement to AS 1684.2 2006) 52pp
(TM-002)
AS 1684.2 Supplement 02006 Non-cyclonic areasGeneral introduction and index (Supplement to AS 1684.2 2006) 2pp
(TM-002)
AS 1684.2 N1/N2 Supplement 112006 Non-cyclonic areasN1/N2 Supplement 11: Timber framing span tablesWind classification N1/N2Unseasoned softwoodStress Grade F7 (Supplement to AS1684.22006) 56pp
(TM-002)
AS 1684.2 N3 Supplement 72006 Non-cyclonic areasN3 Supplement 7: Timber framing span tablesWind classification N3WA seasoned hardwood Stress Grade F14 (Supplement to AS1684.22006) 49pp
(TM-002)
AS 1684.2 N1/N2 Supplement 12006 Non-cyclonic areasN1/N2 Supplement 1: Timber framing span tablesWind classification N1/N2Seasoned softwood Stress Grade F5 (Supplement to AS 1684.22006) 52pp
(TM-002)
AS 1684.2 N1/N2 Supplement 122006 Non-cyclonic areasN1/N2 Supplement 12: Timber framing span tablesWind classification N1/N2Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.22006) 55pp
(TM-002)
AS 1684.2 N3 Supplement 82006 Non-cyclonic areasN3 Supplement 8: Timber framing span tablesWind classification N3Seasoned hardwoodStress Grade F17(Supplement to AS1684.22006) 52pp
(TM-002)
AS 1684.2 N1/N2 Supplement 22006 Non-cyclonic areasN1/N2 Supplement 2: Timber framing span tablesWind classification N1/N2Seasoned softwood Stress Grade F7 (Supplement to AS 1684.22006) 53pp
(TM-002)
AS 1684.2 N1/N2 Supplement 132006 Non-cyclonic areasN1/N2 Supplement 13: Timber framing span tablesWind classification N1/N2Unseasoned hardwoodStress Grade F11 (Supplement to AS1684.22006) 55pp
(TM-002)
AS 1684.2 N3 Supplement 92006 Non-cyclonic areasN3 Supplement 9: Timber framing span tablesWind classification N3Seasoned hardwoodStress Grade F27(Supplement to AS1684.22006) 52pp
(TM-002)
AS 1684.2 N1/N2 Supplement 32006 Non-cyclonic areasN1/N2 Supplement 3: Timber framing span tablesWind classification N1/N2Seasoned softwood Stress Grade F8 (Supplement to AS1684.22006) 53pp
(TM-002)
AS 1684.2 N1/N2 Supplement 142006 Non-cyclonic areasN1/N2 Supplement 14: Timber framing span tablesWind classification N1/N2Unseasoned hardwoodStress Grade F14 (Supplement to AS1684.22006) 53pp
(TM-002)
AS 1684.2 N3 Supplement 102006 Non-cyclonic areasN3 Supplement 10: Timber framing span tablesWind classification N3Unseasoned softwoodStress Grade F5 (Supplement to AS 1684.22006) 53pp
(TM-002)
AS 1684.2 N1/N2 Supplement 42006 Non-cyclonic areasN1/N2 Supplement 4: Timber framing span tablesWind classification N1/N2Seasoned softwood Stress Grade MGP10 (Supplement to AS1684.22006) 53pp
(TM-002)
AS 1684.2 N1/N2 Supplement 152006 Non-cyclonic areasN1/N2 Supplement 15: Timber framing span tablesWind classification N1/N2Unseasoned hardwoodStress Grade F17 (Supplement to AS1684.22006) 53pp
(TM-002)
AS 1684.2 N3 Supplement 112006 Non-cyclonic areasN3 Supplement 11: Timber framing span tablesWind classification N3Unseasoned softwoodStress Grade F7 (Supplement to AS 1684.22006) 54pp
(TM-002)
AS 1684.2 N1/N2 Supplement 52006 Non-cyclonic areasN1/N2 Supplement 5: Timber framing span tablesWind classification N1/N2Seasoned softwood Stress Grade MGP12 (Supplement to AS1684.22006) 52pp
(TM-002)
AS 1684.2 N3 Supplement 12006 Non-cyclonic areasN3 Supplement 1: Timber framing span tablesWind classification N3Seasoned softwoodStress Grade F5 (Supplement to AS 1684.22006) 51pp
(TM-002)
AS 1684.2 N3 Supplement 122006 Non-cyclonic areasN3 Supplement 12: Timber framing span tablesWind classification N3Unseasoned hardwood Stress Grade F8 (Supplement to AS 1684.22006) 53pp
(TM-002)
AS 1684.2 N1/N2 Supplement 62006 Non-cyclonic areasN1/N2 Supplement 6: Timber framing span tablesWind classification N1/N2Seasoned softwood Stress Grade MGP15 (Supplement to AS1684.22006) 52pp
(TM-002)
AS 1684.2 N3 Supplement 22006 Non-cyclonic areasN3 Supplement 2: Timber framing span tablesWind classification N3Seasoned softwoodStress Grade F7 (Supplement to AS 1684.22006) 52pp
(TM-002)
AS 1684.2 N3 Supplement 132006 Non-cyclonic areasN3 Supplement 13: Timber framing span tablesWind classification N3Unseasoned hardwood Stress Grade F11 (Supplement to AS 1684.22006) 54pp
(TM-002)
AS 1684.2 N1/N2 Supplement 72006 Non-cyclonic areasN1/N2 Supplement 7: Timber framing span tablesWind classification N1/N2WA seasoned hardwood Stress Grade F14 (Supplement to AS1684.22006) 49pp
(TM-002)
AS 1684.2 N3 Supplement 32006 Non-cyclonic areasN3 Supplement 3: Timber framing span tablesWind classification N3Seasoned softwoodStress Grade F8 (Supplement to AS 1684.22006) 52pp
(TM-002)
AS 1684.2 N3 Supplement 142006 Non-cyclonic areasN3 Supplement 14: Timber framing span tablesWind classification N3Unseasoned hardwood Stress Grade F14 (Supplement to AS 1684.22006) 53pp
(TM-002)
43
AS 1684.2 N4 Supplement 112006 Non-cyclonic areasN4 Supplement 11: Timber framing span tablesWind classification N4Unseasoned softwoodStress Grade F7 (Supplement to AS1684.22006) 55pp
(TM-002)
AS 1684.3 C1 Supplement 62006 Cyclonic areasC1 Supplement 6: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade MGP15 (Supplement to AS1684.32006) 52pp
(TM-002)
AS 1684.2 N4 Supplement 12006 Non-cyclonic areasN4 Supplement 1: Timber framing span tablesWind classification N4Seasoned softwoodStress Grade F5(Supplement to AS1684.22006) 52pp
(TM-002)
AS 1684.2 N4 Supplement 122006 Non-cyclonic areasN4 Supplement 12: Timber framing span tablesWind classification N4Unseasoned hardwood Stress Grade F8 (Supplement to AS1684.22006) 54pp
(TM-002)
AS 1684.3 C1 Supplement 72006 Cyclonic areasC1 Supplement 7: Timber framing span tablesWind classification C1WA seasoned hardwoodStress Grade F14 (Supplement to AS1684.3 2006) 50pp
(TM-002)
AS 1684.2 N4 Supplement 22006 Non-cyclonic areasN4 Supplement 2: Timber framing span tablesWind classification N4Seasoned softwoodStress Grade F7 (Supplement to AS1684.22006) 53pp
(TM-002)
AS 1684.2 N4 Supplement 132006 Non-cyclonic areasN4 Supplement 13: Timber framing span tablesWind classification N4Unseasoned hardwood Stress Grade F11 (Supplement to AS1684.22006) 54pp
(TM-002)
AS 1684.3 C1 Supplement 82006 Cyclonic areasC1 Supplement 8: Timber framing span tablesWind classification C1Seasoned hardwoodStress Grade F17(Supplement to AS1684.32006) 52pp
(TM-002)
AS 1684.2 N4 Supplement 32006 Non-cyclonic areasN4 Supplement 3: Timber framing span tablesWind classification N4Seasoned softwoodStress Grade F8 (Supplement to AS1684.22006) 53pp
(TM-002)
AS 1684.2 N4 Supplement 142006 Non-cyclonic areasN4 Supplement 14: Timber framing span tablesWind classification N4Unseasoned hardwood Stress Grade F14 (Supplement to AS1684.22006) 53pp
(TM-002)
AS 1684.3 C1 Supplement 92006 Cyclonic areasC1 Supplement 9: Timber framing span tablesWind classification C1Seasoned hardwoodStress Grade F27(Supplement to AS1684.32006) 52pp
(TM-002)
AS 1684.2 N4 Supplement 42006 Non-cyclonic areasN4 Supplement 4: Timber framing span tablesWind classification N4Seasoned softwoodStress Grade MGP10 (Supplement to AS1684.2 2006) 53pp
(TM-002)
AS 1684.2 N4 Supplement 152006 Non-cyclonic areasN4 Supplement 15: Timber framing span tablesWind classification N4Unseasoned hardwood Stress Grade F17 (Supplement to AS1684.22006) 53pp
(TM-002)
AS 1684.3 C1 Supplement 102006 Cyclonic areasC1 Supplement 10: Timber framing span tablesWind classification C1Unseasoned softwoodStress Grade F5 (Supplement to AS1684.32006) 54pp
(TM-002)
AS 1684.2 N4 Supplement 52006 Non-cyclonic areasN4 Supplement 5: Timber framing span tablesWind classification N4Seasoned softwoodStress Grade MGP12 (Supplement to AS1684.2 2006) 53pp
(TM-002)
243pp
AS 1684.2 N4 Supplement 62006 Non-cyclonic areasN4 Supplement 6: Timber framing span tablesWind classification N4Seasoned softwoodStress Grade MGP15 (Supplement to AS1684.2 2006) 52pp
(TM-002)
Amendment 1 16 November 2006 Specifies requirements for building practice and for the selection, placement and fixing of the various structural elements used in the construction of timberframed Class 1 and Class 10 buildings, as defined in the Building Code of Australia, for cyclonic areas. (TM-002)
AS 1684.3 C1 Supplement 112006 Cyclonic areasC1 Supplement 11: Timber framing span tablesWind classification C1Unseasoned softwoodStress Grade F7 (Supplement to AS1684.32006) 55pp
(TM-002)
AS 1684.3 Supplement 02006 Cyclonic areasGeneral introduction and index (Supplement to AS 1684.32006) 2pp
(TM-002)
AS 1684.3 C1 Supplement 122006 Cyclonic areasC1 Supplement 12: Timber framing span tablesWind classification C1Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.32006) 54pp
(TM-002)
AS 1684.2 N4 Supplement 72006 Non-cyclonic areasN4 Supplement 7: Timber framing span tablesWind classification N4WA seasoned hardwood Stress Grade F14 (Supplement to AS1684.22006) 50pp
(TM-002)
AS 1684.3 C1 Supplement 12006 Cyclonic areasC1 Supplement 1: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade F5 (Supplement to AS1684.32006) 52pp
(TM-002)
AS 1684.3 C1 Supplement 132006 Cyclonic areasC1 Supplement 13: Timber framing span tablesWind classification C1Unseasoned hardwoodStress Grade F11 (Supplement to AS1684.3 2006) 54pp
(TM-002)
AS 1684.2 N4 Supplement 82006 Non-cyclonic areasN4 Supplement 8: Timber framing span tablesWind classification N4Seasoned hardwoodStress Grade F17 (Supplement to AS1684.2 2006) 52pp
(TM-002)
AS 1684.3 C1 Supplement 22006 Cyclonic areasC1 Supplement 2: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade F7 (Supplement to AS1684.32006) 53pp
(TM-002)
AS 1684.3 C1 Supplement 142006 Cyclonic areasC1 Supplement 14: Timber framing span tablesWind classification C1Unseasoned hardwoodStress Grade F14 (Supplement to AS1684.3 2006) 53pp
(TM-002)
AS 1684.2 N4 Supplement 92006 Non-cyclonic areasN4 Supplement 9: Timber framing span tablesWind classification N4Seasoned hardwoodStress Grade F27 (Supplement to AS1684.2 2006) 52pp
(TM-002)
AS 1684.3 C1 Supplement 32006 Cyclonic areasC1 Supplement 3: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade F8(Supplement to AS1684.32006) 53pp
(TM-002)
AS 1684.2 N4 Supplement 102006 Non-cyclonic areasN4 Supplement 10: Timber framing span tablesWind classification N4Unseasoned softwoodStress Grade F5 (Supplement to AS1684.22006) 54pp
(TM-002)
AS 1684.3 C1 Supplement 42006 Cyclonic areasC1 Supplement 4: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade MGP10 (Supplement to AS1684.32006) 53pp
(TM-002)
AS 1684.3 C1 Supplement 152006 Cyclonic areasC1 Supplement 15: Timber framing span tablesWind classification C1Unseasoned hardwoodStress Grade F17 (Supplement to AS1684.3 2006) 53pp
(TM-002)
AS 1684.3 C2 Supplement 12006 Cyclonic areasC2 Supplement 1: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade F5 (Supplement to AS1684.32006) 53pp
(TM-002)
AS 1684.3 C1 Supplement 52006 Cyclonic areasC1 Supplement 5: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade MGP12 (Supplement to AS1684.32006) 52pp
(TM-002)
AS 1684.3 C2 Supplement 22006 Cyclonic areasC2 Supplement 2: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade F7 (Supplement to AS1684.32006) 54pp
(TM-002)
44
AS 1684.3 C2 Supplement 142006 Cyclonic areasC2 Supplement 14: Timber framing span tablesWind classification C2Unseasoned hardwoodStress Grade F14 (Supplement to AS1684.3 2006) 53pp
(TM-002)
AS 1684.3 C3 Supplement 112006 Cyclonic areasC3 Supplement 11: Timber framing span tablesWind classification C3Unseasoned softwoodStress Grade F7 (Supplement to AS1684.32006) 55pp
(TM-002)
AS 1684.3 C2 Supplement 42006 Cyclonic areasC2 Supplement 4: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade MGP10 (Supplement to AS1684.32006) 53pp
(TM-002)
AS 1684.3 C2 Supplement 152006 Cyclonic areasC2 Supplement 15: Timber framing span tablesWind classification C2Unseasoned hardwoodStress Grade F17 (Supplement to AS1684.3 2006) 53pp
(TM-002)
AS 1684.3 C3 Supplement 122006 Cyclonic areasC3 Supplement 12: Timber framing span tablesWind classification C3Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.32006) 54pp
(TM-002)
AS 1684.3 C2 Supplement 52006 Cyclonic areasC2 Supplement 5: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade MGP12 (Supplement to AS1684.32006) 53pp
(TM-002)
AS 1684.3 C3 Supplement 12006 Cyclonic areasC3 Supplement 1: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade F5 (Supplement to AS1684.32006) 53pp
(TM-002)
AS 1684.3 C3 Supplement 132006 Cyclonic areasC3 Supplement 13: Timber framing span tablesWind classification C3Unseasoned hardwoodStress Grade F11 (Supplement to AS1684.3 2006) 54pp
(TM-002)
AS 1684.3 C2 Supplement 62006 Cyclonic areasC2 Supplement 6: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade MGP15 (Supplement to AS1684.32006) 52pp
(TM-002)
AS 1684.3 C3 Supplement 22006 Cyclonic areasC3 Supplement 2: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade F7 (Supplement to AS1684.32006) 54pp
(TM-002)
AS 1684.3 C2 Supplement 72006 Cyclonic areasC2 Supplement 7: Timber framing span tablesWind classification C2WA seasoned hardwoodStress Grade F14 (Supplement to AS1684.3 2006) 50pp
(TM-002)
AS 1684.3 C3 Supplement 32006 Cyclonic areasC3 Supplement 3: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade F8(Supplement to AS1684.32006) 54pp
(TM-002)
AS 1684.3 C3 Supplement 142006 Cyclonic areasC3 Supplement 14: Timber framing span tablesWind classification C3Unseasoned hardwoodStress Grade F14 (Supplement to AS1684.3 2006) 54pp
(TM-002)
AS 1684.3 C2 Supplement 82006 Cyclonic areasC2 Supplement 8: Timber framing span tablesWind classification C2Seasoned hardwoodStress Grade F17 (Supplement to AS1684.32006) 52pp
(TM-002)
AS 1684.3 C3 Supplement 42006 Cyclonic areasC3 Supplement 4: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade MGP10 (Supplement to AS1684.32006) 54pp
(TM-002)
AS 1684.3 C3 Supplement 152006 Cyclonic areasC3 Supplement 15: Timber framing span tablesWind classification C3Unseasoned hardwoodStress Grade F17 (Supplement to AS1684.3 2006) 54pp
(TM-002)
194pp
AS 1684.3 C2 Supplement 92006 Cyclonic areasC2 Supplement 9: Timber framing span tablesWind classification C2Seasoned hardwoodStress Grade F27 (Supplement to AS1684.32006) 52pp
Amendment 1 19 April 2006 (TM-002)
AS 1684.3 C3 Supplement 52006 Cyclonic areasC3 Supplement 5: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade MGP12 (Supplement to AS1684.32006) 53pp
(TM-002)
Amendment 1 16 November 2006 Specifies requirements for building practice and for the selection, placement and fixing of the various structural elements used in the construction of timberframed Class 1 and Class 10 buildings, as defined in the Building Code of Australia, for non-cyclonic wind classifications N1 and N2. (TM-002)
5pp
AS 1684.3 C2 Supplement 102006 Cyclonic areasC2 Supplement 10: Timber framing span tablesWind classification C2Unseasoned softwoodStress Grade F5 (Supplement to AS1684.32006) 54pp
(TM-002)
AS 1684.3 C3 Supplement 62006 Cyclonic areasC3 Supplement 6: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade MGP15 (Supplement to AS1684.32006) 53pp
(TM-002)
Amendment 1 9 August 1991 Sets out requirements for portable hand-operated knapsack spray pumps of the water-container type for firefighting. It specifies the materials and construction details of the container and pump, and includes a standard test for the appliance. (FP-006)
AS 1684.3 C2 Supplement 112006 Cyclonic areasC2 Supplement 11: Timber framing span tablesWind classification C2Unseasoned softwoodStress Grade F7 (Supplement to AS1684.32006) 55pp
(TM-002)
AS 1684.3 C3 Supplement 72006 Cyclonic areasC3 Supplement 7: Timber framing span tablesWind classification C3WA seasoned hardwoodStress Grade F14 (Supplement to AS1684.3 2006) 52pp
(TM-002)
AS 1684.3 C2 Supplement 122006 Cyclonic areasC2 Supplement 12: Timber framing span tablesWind classification C2Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.32006) 54pp
(TM-002)
AS 1684.3 C3 Supplement 82006 Cyclonic areasC3 Supplement 8: Timber framing span tablesWind classification C3Seasoned hardwoodStress Grade F17 (Supplement to AS1684.32006) 53pp
(TM-002)
AS 1684.3 C2 Supplement 132006 Cyclonic areasC2 Supplement 13: Timber framing span tablesWind classification C2Unseasoned hardwoodStress Grade F11 (Supplement to AS1684.3 2006) 53pp
(TM-002)
AS 1684.3 C3 Supplement 92006 Cyclonic areasC3 Supplement 9: Timber framing span tablesWind classification C3Seasoned hardwoodStress Grade F27 (Supplement to AS1684.32006) 53pp
(TM-002)
AS 1684.3 C3 Supplement 102006 Cyclonic areasC3 Supplement 10: Timber framing span tablesWind classification C3Unseasoned softwoodStress Grade F5(Supplement to AS1684.32006) 54pp
(TM-002)
45
AS 1696.11987
any capacity and of a size and type that is usually erected on site. The specification requirements may be applied to tanks constructed of other than steel. Typical acceptable joints are illustrated. (ME-017)
3pp
Sets out a spectrophotometric method for the determination of phosphorus in the range 0.003 to 0.05% in copper. The method has been found to be satisfactory for deoxidized copper containing up to 0.01% silver. The method represents a revision of AS 1696.11974. (CH-010)
35pp
6pp
Specifies an electrogravimetric method for the determination of copper content in blister, anode and high grade copper, where the content of copper is greater than 97%. The method is particularly applicable where impurities would normally interfere with the electrode deposition of copper. (CH-010)
AS 16972005 Installation and maintenance of steel pipe systems for gas 46pp Available Superseded
Specifies materials, design, construction, installation, testing and maintenance requirements for steel piping systems covered by AS4645, for the distribution of fuel gas suitable for domestic, commercial or industrial uses, where the pressure of the gas is not greater than 1050kPa and the operating temperature range of the materials is from (30C to 120C; or where the hoop stress level is not greater than 20% of the specified minimum yield stress of the pipe used in that system. (AG-008)
Amendment 1 5 July 1998 Amendment 2 1 May 2000 Amendment 3 7 May 2001 Amendment 4 22 November 2002 Sets out the limit state design methods to be used in the design or appraisal of structural elements comprised of timber or wood products and of structures comprised substantially of timber. Design data is provided for sawn timber, glued laminated timber, round timber, plywood, laminated veneer lumber, monitored in-grade tested material and various types of fastenings. Test methods are included for components or assemblies of unconventional design which are not readily amenable to detailed analysis. Guidelines on serviceability considerations and information on the assignment of capacity factors to timber products are also provided. (TM-001)
Amendment 1 11 April 1994 Amendment 2 15 August 1994 Sets out minimum requirements for a geotechnical site investigation, as a component in the engineering design, construction, commissioning and operation of civil engineering and building works. Comprehensive appendices are provided dealing with preferred systems of geotechnical investigations and commonly considered laboratory tests. A typical project brief for a geotechnical site investigation is given and the commentary sets out guidelines on construction assessment, maintenance and evaluation of failures. (CE-015)
22pp
Specifies quality requirements for Grades AW and BW of hickory handles for striking tools and Grades A and B of Australian hardwood handles for both striking and nonstriking tools. Appendices give recommendations for timber species, dimensions and tolerances of these tool handles. (TM-007)
16pp
Amendment 1 19 April 2006 Provides a list of structural timbers and their properties, and an extensive explanation of the list. (TM-001)
10pp
Specifies requirements for washbasins made from cast iron vitreous enamelled, pressed steel vitreous enamelled, vitreous china, stainless steel, plastics and composite materials. (WS-003)
7pp
16pp
Amendment 1 28 September 2007 Specifies requirements for protective headgear for vehicle users, designed to mitigate the adverse effect of a blow to the head. (CS-076)
AS 17102007 Non-destructive testingUltrasonic testing of carbon and low alloy steel plate and universal sectionsTest methods and quality classification 17pp
Specifies the methods for the ultrasonic manual testing of carbon and low alloy wrought steel plate of uniform thickness, in the range 5 mm to 180 mm inclusive, and universal sections using A-scan presentation. (MT-007)
Applies to refrigerated cabinets for the retail sale of packaged frozen foods. It provides for two climate classes, for use where the ambient temperature will not exceed 25C (e.g. a naturally mild climate or a fully and continuously air-conditioned store) and for use where the ambient temperature may exceed 25C but will not exceed 32C. Performance requirements and methods of test are specified, together with other requirements relating to construction, volume and area ratings, and markings. (ME-008)
AS 1731 Refrigerated display cabinets AS 1731.12003 Terms and definitions (prEN ISO 23953-1:2003)
AS/NZS 1715:1994 Selection, use and maintenance of respiratory protective devices 79pp
Sets out the principles of respiratory protection. Provides information concerning the effects on the body and protection from harmful substances and atmospheres deficient in oxygen. Offers guidance on considerations critical to the correct selection, use and maintenance of respirators specified in AS/NZS 1716. Advice on the range of protection factors and the level of protection provided by different respiratory devices is covered. Gives guidance on hazard reduction and respiratory protection programs. This Standard does not deal with the special problems associated with underwater breathing, use of respirators in aircraft or life support respirators for medical or resuscitation purposes. (SF-010)
9pp
AS 17211985 General purpose metric screw threads (ISO 261, ISO 262, ISO 68, ISO 724, ISO 965-1, ISO 965-2, ISO 965-3) 90pp
Amendment 1 6 April 1987 Specifies requirements for single start parallel metric screw threads having the ISO basic profile for triangular screw threads, covering the size range from 1 mm diameter to 355 mm diameter inclusive. Provides for a coarse pitch series, a fine pitch series and a constant pitch series, the latter intended for use in applications for which either the coarse or fine pitch series are unsuitable. Gives information on screw thread parameters, tolerances, deviations, thread classes, designation and symbols. Appendices are included giving the basis of the tabulated values, guidelines (with examples) for calculating the limits of size of untabulated screw threads and notes on the production of screw threads. (ME-028)
Amendment 1 15 December 2005 Specifies terms and definitions for refrigerated display cabinets for the sale and display of food products. Does not cover refrigerated vending machines or cabinets intended for use in catering or similar nonretail applications. (ME-008)
AS 1731.22003 General mechanical and physical requirements (prEN ISO 23953-2:2003) 11pp
Amendment 1 15 December 2005 Specifies terminology, general mechanical and physical requirements, test conditions and installation and maintenance, including a user's guide, for refrigerated display cabinets for the sale or display of food products. Does not cover refrigerated vending machines, cabinets intended for use in catering and similar nonretail applications. (ME-008)
118pp
Amendment 1 16 November 2005 Specifies minimum performance and testing criteria to be observed in the manufacture of respiratory protective devices. (SF-010)
AS 1722 Pipe threads of Whitworth form AS 1722.21992 Fastening pipe threads (ISO 228-1:1982, ISO 228-2:1987)
AS 1731.32003 Linear dimensions, areas and volumes (prEN ISO 23953-2:2003) 2pp 23pp
Amendment 1 19 December 2005 Specifies definitions for linear dimensions, areas and volumes for refrigerated display cabinets. (ME-008)
16pp
Specifies separate dimensional, test and inspection requirements for carriers comprising aperture cards prepared for the mounting of original 35 mm microfilm images, or camera cards for microfilming of technical documents, or copy cards for the reproduction of 35 mm microfilm images, or image cards derived from any of the above. An appendix provides guidance on the printed format on the carrier. (MS-004)
Specifies thread form, thread dimensions, tolerance, and associated gauges and gauging practices for fastening threads for pipes of nominal bore 4 mm to 150 mm. Incorporates modified tables for screw gauge limits and dimensions for fastening pipe threads; setting plugs for GO and NOT GO screw calliper gauges; provision for the use of adjustable screw calliper gauges; and wear allowance for GO gauges. (ME-028)
17pp
Amendment 1 15 December 2005 Specifies general conditions for testing refrigerated display cabinets. (ME-008)
46
29pp
21pp
Amendment 1 15 December 2005 Specifies methods for the determination of test package temperatures in refrigerated display cabinets. (ME-008)
AS 17331976 Methods for the determination of grain size in metals (ISO/R 643) 24pp
In separate sections covers general procedures for determining grain size in metals and alloys by estimation of grain size using the comparison method and by calculation of grain size number using the intercept and planimetric methods, specific procedures for austenitic grain size in steels by a range of micrographic methods, and specific procedures for metals and alloys consisting principally of a single phase. Appendices provide explanatory notes on specifying austenitic grain size limits for steel, list etching reagents, and show the standard grain size charts for untwinned grains (flat etch), twinned grain (flat etch), and heavily twinned grains (contrast etch). (MT-008)
Amendment 1 5 April 1998 Sets out the requirements for permanently installed special purpose industrial lifts that provide guided transportation of personnel and their tools and equipment. (ME-004)
6pp
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in firerated liftwells. It applies where doors are required to have a fire-rating certificate. (ME-004)
2pp
Amendment 1 19 December 2005 Specifies a procedure to test the defrosting method or refrigerated display cabinets when tested at the same conditions as those specified for the temperature test (AS/NZS 1731.5). This test is not applicable to cabinets for parts of cabinets intended to be defrosted manually. (ME-008)
AS/NZS 1734:1997 Aluminium and aluminium alloysFlat sheet, coiled sheet and plate (EN 573-1) 36pp
Specifies requirements for wrought aluminium and aluminium alloy flat sheet, coiled sheet and plate for general engineering purposes. Chemical composition, mechanical properties and allowable tolerances on dimensions are specified. An appendix provides information on typical fabrication characteristics and applications. (MT-003)
3pp
Amendment 1 15 December 2005 Specifies a procedure to determine the extent of condensation of water on the internal and external surfaces of refrigerated display cabinets when tested under specified ambient conditions. (ME-008)
AS 1735 Lifts, escalators and moving walks AS 1735.12003 General requirements 88pp
3pp
Amendment 1 15 December 2005 Specifies a method of measuring the consumption of electrical energy of refrigerated display cabinets. (ME-008)
Amendment 1 23 November 2006 Prescribes uniform requirements and provides definitions for lifts, escalators and moving walks. It also includes appendices which set out variations to BS EN 81-1and BS EN 81-2 for their acceptance in Australia as an alternative to AS 1735.2 and AS 1735.3. (ME-004)
12pp
AS 1731.102003 Test for absence of odour and taste (prEN ISO 23953-2:2003)
3pp
Specifies requirements for powered low-rise vertically lifting platforms. The platforms may be controlled by automatic or constant pressure devices. It is intended that the Standard be applied only where the platform is used by persons with limited mobility or for wheelchair applications. (ME-004)
Amendment 1 15 December 2005 Specifies methods of test to check that materials used for the internal components of refrigerated display cabinets will not impart either taste or odour to food. (ME-008)
40pp
AS 1731.112003 Installation, maintenance and user guide (prEN ISO 23953-2:2003) 4pp
Amendment 1 19 December 2005 Provides a guide for the installation and maintenance of refrigerated display cabinets and a guidance for use. (ME-008)
Specifies requirements for low-speed passenger lifts controlled by a constant pressure device. It is intended that the Standard be applied only for lifts used primarily by persons with limited mobility. (ME-004)
75pp
AS 1735.161993 Lifts for persons with limited mobility Restricted useAutomatically controlled 32pp
Specifies requirements for automatically controlled, low-speed passenger lifts intended for infrequent use by persons with limited mobility. (ME-004)
Specifies requirements for electrohydraulic lifts for carrying passengers or goods or both. (ME-004)
AS 1731.122003 Measurement of the heat extraction rate of the cabinets when the condensing unit is remote from the cabinet (prEN ISO 23953-2:2003) 14pp
Amendment 1 19 December 2005 Provides a method for heat extraction rate measurements and conditions for refrigerated display cabinets when the condensing unit is remote from the cabinet and used with compression-type or indirect-type refrigerating system. (ME-008)
37pp
Amendment 1 14 July 1989 Amendment 2 28 June 2000 Sets out requirements for power-operated service lifts. Covers service lifts with rated speed not more than 1 m/s, rated load more than 12 kg, and internal car volume more than 0.06 m3. (ME-004)
AS 1735.171995 Lifts for people with limited mobility Restricted useWater-drive 21pp
Specifies requirements for water-drive lifts that are installed in a private residence for use primarily by persons with limited mobility. (ME-004)
AS/NZS 1735.18:2002 Passenger lifts for private residence Automatically controlled 39pp
Specifies requirements for automatically controlled, small-sized, low-speed passenger lifts that are installed in private residence. (ME-004)
6pp
Amendment 1 15 December 2005 Specifies requirements for the recording of test results and preparing a test report for the testing of refrigerated display cabinets. (ME-008)
9pp
AS 1731.142003 Minimum energy performance standard (MEPS) requirements (prEN ISO 23953-2:2003) 39pp
Amendment 1 30 December 2005 Specifies the mandatory requirements for remote and self-contained refrigerated display cabinets that fall within the Scope of AS 1731.1. (ME-008)
Specifies requirements for power-operated stairway lifts intended for use by persons with limited mobility. The lifts consist of a carriage, incorporating a platform, or a chair, or both, for raising or lowering persons along stairways. (ME-004)
20pp
AS 17411991 Vitrified clay pipes and fittings with flexible jointsSewer quality 51pp
Specifies range of nominal sizes (DN 100 to DN 1000), crushing strength classes (3 and 4), dimensional and performance requirements for vitrified clay pipes and fittings and flexible joints (socket and sleeve types), for operation under gravity, intended for the conveyance of sewage and industrial waste. Appendices set out test procedures, dimensions and tolerances for pipes, common fittings and
6pp
Applies to non-ferrous fusible plugs for relieving steam pressure in boilers when low water is experienced. Up-
Amendment 1 14 July 1989 Sets out requirements for power-operated inclined lifts of the car or platform type for public and private use, other than stairway lifts, temporary lifts, or hoists used solely for building work, and amusement devices. (ME-004)
47
AS 1742.12003
socket type flexible joints, purchasing guidelines and methods for determination of compliance with this Standard. (WS-015)
AS 1742.81990 Freeways
51pp
and constructed of hard-drawn copper wires. A range of wire sizes and their properties are provided. (EL-010)
AS 1742 Manual of uniform traffic control devices AS 1742.12003 General introduction and index of signs 106pp
Specifies road sign classifications, numbering systems and basic design requirements in terms of colour and shape coding. Provides an illustrated index of all road signs and signtypes which have a standard sign number, and includes references to other Standards in the AS 1742 series which cover usgae of each sign. (MS-012)
Specifies traffic control devices for use on freeways, including guide signs associated with interchanges, service and tourist signs, and pavement marking. Devices required on other roads in the vicinity of a freeway which pertain to, or are required due to the presence of the freeway are also included. (MS-012)
AS/NZS 1747:2003 Reeling, trailing and feeder cables used for miningRepair, testing and fitting of accessories 52pp
Amendment 1 19 August 2005 Specifies standard procedures for the repair and testing of reeling, trailing and feeder cables used in mining applications. (EL-003)
49pp
Specifies requirements for the signs, pavement markings and other devices to be applied to bicycle facilities both on the road and on paths separate from the road, either for the exclusive use of bicycles or joint use with other users. Includes recommendations for guide signs and other navigational information for cyclists. (MS-012)
AS 1742.1 Supplement 1(Int)2000 General introduction and index of signs Australian Road Rules supplement (Supplement to AS 1742.11991) 9pp (Expired 8 December 2002)
Provides descriptions and specifications for the use of signs and devices in the Australian Road Rules 2000 which are not included in any other part of AS 1742. Altered usages covered in other parts of the Standards are included. (MS-012)
32pp
Specifies traffic control devices for use in controlling and protecting pedestrian traffic on roads. It also sets out requirements regarding the installation of these devices to achieve the pedestrian control necessary for pedestrians and other road users. Appendices include guidance on pedestrian treatments at railway level crossings, and model instructions for school crossing supervisors and child monitors. (MS-012)
AS 17531990 Webbing for restraining devices for occupants of motor vehicles 11pp
Amendment 1 16 November 1992 Specifies requirements for webbing for restraining devices, and gives methods of test. Webbing complying with this Standard is intended for adult seat belts and child restraints, but may be suitable for other applications. Produced as a Joint Australian/New Zealand Standard. (CS-075)
57pp
Specifies the signs and pavement markings to be used for indicating areas of a road available or reserved for parking, where parking is restricted or prohibited and where stopping is restricted or prohibited, on a parttime or full-time basis by means of either linear or area parking control. (MS-012)
AS/NZS 1754:2004 Child restraint systems for use in motor vehicles 47pp
Amendment 1 29 December 2004 Specifies the requirements for restraining devices for child occupants of passenger cars to reduce the risk of bodily injury in a vehicle impact. (CS-085)
23pp
Specifies the traffic control devices required to designate lanes as bus lanes, transit lanes, tram lanes or truck lanes. It also specifies devices for the control or prohibition of truck or bus traffic where required on roadways. (MS-012)
AS/NZS 1754:2000 Child restraint systems for use in motor vehicles 44pp Available Superseded
Amendment 1 27 April 2001 Specifies the requirements for restraining devices for child occupants of passenger cars and their derivatives. (CS-085)
40pp
Sets out standards for the provision of traffic signs, pavement markings and delineation at a variety of local area traffic management (LATM) devices including roundabouts, road humps, slow points, shared zones and related devices. Guidance in the planning and development of LATM schemes is also given. (MS-012)
82pp
42pp
Sets out minimum safety requirements for the design, installation and guarding of conveyor and conveyor systems both above ground and underground. It emphasizes the requirements for operational safety and protection of persons who may be exposed to risks associated with conveyors and conveyor systems. It does not apply to platform elevators, moving stairways or conveyors specifically designed for the conveyance of people. (SF-025)
28pp
Specifies the traffic control devices to be used for the regulatory control of traffic speed and gives guidance on how speed limits should be determined and applied in various situations. The Standard does not cover temporary speed limits, the use of advisory speed signs, or speed limits applicable to certain classes of vehicle or driver. (MS-012)
Specifies the type and layout of signals, aspects and displays to be used at locations controlled by traffic signals. Basic requirements for signs and pavement markings to be used in conjunction and in accordance with AS 1742.2, are also given. The Standard does not cover railway level crossing signals. (MS-012)
14pp
Amendment 1 4 December 2001 Specifies requirements for materials, construction and finish of household sinks. (WS-003)
318pp
82pp
Specifies graphics, layout and size requirements together with an abridged materials and manufacturing specification for the manufacture of the standard road signs provided for in AS 1742. (MS-012)
AS 17621984 Helical lock-seam corrugated steel pipes Design and installation 13pp
Lays down essential requirements for the installation of pipes manufactured to AS 1761. It details considerations to be taken into account in design calculations and installation procedures. Design soil compaction, design pressure, ring compression, stresses, thickness and handling stiffness are covered. Sectional properties for each size of the four corrugations are tabulated and appendices include reference tables of cover limits for railway M250 and highway T44A14 live loads. (CE-025)
Specifies requirements for traffic control devices for tourist and service facilities and establishments, and features of tourist interest on all roads including expressway type roads. It includes the signposting of tourist information facilities and tourist drives and ways. (MS-012)
AS 17441975 Forms of letters and numerals for road signs (known as Standard alphabets for road signs) 48pp
Gives the forms and dimensions of seven series of capital letters and numerals and one of lower-case letters for use on signs specified in AS 1742 and AS 1743. It includes tables of dimensions for a range of heights, and tables of spacings. (MS-012)
68pp
Amendment 1 31 October 2007 Specifies traffic control devices to be used to control and warn traffic at and in advance of railway crossings at grade. It specifies the way in which these devices are used to achieve the level of traffic control required for the safety of rail traffic and road users, including pedestrians. (MS-012)
20pp
Establishes uniformity of terminology for industrial trucks and appliances intended to carry out similar functions, including types with various control and load-handling capabilities and their attachments, orientation and movements. (ME-026)
48
AS 1767.2.31999 Test methodsMethod of sampling liquid dielectrics (IEC 60475 Ed. 1.0 (Bilingual 1974)) 12pp
Sets out the procedure to be used for sampling liquid dielectrics with viscosity at the sampling temperature of less that 1 500 cSt, in delivery containers and electrical equipment. This Standard is based on but is not equivalent to, and has been reproduced from, IEC 60475:1974. (EL-008)
3pp
Sets out microbiological methods for the examination of cultured dairy products. (FT-024)
AS 1766.1.41991 General procedures and techniques Colony countSurface spread method 2pp
Sets out a method for estimating the number of colony-forming units (CFUs) in a sample of food using a surface spread technique. (FT-024)
AS 1766.1.51991 General procedures and techniques Colony countMembrane filtration method 4pp
Sets out a method for estimating the number of colony-forming units (CFUs) in suitable liquids using a membrane filtration technique. (FT-024)
AS 1767.2.41999 Test methodsDetection and determination of specified anti-oxidant additives in insulating oils (IEC 60666 Ed. 1.0 (Bilingual 1979)) 12pp
Sets out the methods to be used for the detection and determination of specified anit-oxidant additives in new hydrocarbon insulating oils. This Standard is based on but is not equivalent to, and has been reproduced from, IEC 60666:1979. (EL-008)
AS/NZS 1766.3.14:1998 Examination of specific productsButter, margarine and related products 4pp
Sets out microbiological methods for the examination of butter, margarine and related products. (FT-024)
AS 1766.1.61991 General procedures and techniques Estimation of the most probable number (MPN) of microorganisms 4pp
Sets out a method for estimating the most probable number (MPN) of certain bacterial species per specified unit of food sample using a multiple tube dilution technique. (FT-024)
AS 1767.2.51999 Test methodsUnused hydrocarbon based insulating liquidsTest methods for evaluating the oxidation stability (IEC 61125 Ed. 1.0 (Bilingual 1992)) 24pp
Sets out three test methods using the same apparatus for evaluating the oxidation stability of mineral insulating oils and of hydrocarbon based insulating liquids. This Standard is based on but is not equivalent to, and has been reproduced from, IEC 61125:1992. (EL-008)
4pp
AS 1766.2.21997 Examination for specific organisms Colony count of yeasts and moulds 4pp
Amendment 1 5 October 1997 Sets out procedures for determining the colony count of yeasts and moulds in foods. (FT-024)
Sets out procedures for the microbiological examination of sweetened condensed milks and recombined sweetened condensed milks, flavoured and unflavoured. (FT-024)
AS 1767.2.71999 Test methodsDetermination of PCB contamination in insulating liquids by capillary column gas chromatography Identification of congeners (IEC 61619 Ed. 1.0 (Bilingual 1997)) 30pp
Specifies a method for the determinations of polychlorinated biphenyl (PCB) concentration in nonhalgenated insulating liquids by high-resolution capillary column gas chromatography using an electron capture detector. The method gives total PCB content and is applicable to unused, reclaimed or used insulating liquids. This Standard is technically equivalent to and has been reproduced from IEC 61619:1997. (EL-008)
AS/NZS 1766.2.12:2002 Examination for specific organisms Escherichia coli in bivalve molluscs Rapid method 5pp
Sets out a rapid method for enumerating Escherichia coli in bivalve molluscs using a membrane plate technique. (FT-024)
AS 1767 Insulating liquids AS 1767.11999 Specification for unused mineral insulating oils for transformers and switchgear (IEC 60296 Ed. 2.0 (Bilingual 1982), IEC 60296 Amd.1 Ed. 2.0 (Bilingual 1986)) 10pp
Sets out specification and test methods for unused insulating liquids, as delivered, with or without additives, intended for use in transformers, switchgear and similar electrical equipment in which liquid is required as an insulant or for heat transfer. Includes details of bulk transport sampling, specification and laboratory testing. This Standard is based on but is not technically equivalent to and has been reproduced from IEC 60296:1982 and IEC 60296:1982/Amd.1:1986 (EL-008)
AS 1767.2.82008 Test methodsDetermination of water in oil-impregnated paper and pressboard by automatic coulometric Karl Fischer titration (IEC 60814, Ed. 2.0 (1997) MOD) 24pp
Adopts IEC 60814, Ed. 2.0 to specify methods of determining the water content in insulating liquids and in oil-impregnated cellulosic paper and pressboard insulation using coulometrically generated Karl Fischer reagent. (EL-008)
AS/NZS 1766.2.15:1998 Examination for specific organisms Listeria monocytogenes in dairy products (ISO 10560:1993) 16pp
Describes methods for the detection of Listeria monocytogenesin milk and milk products. (FT-024)
AS/NZS 1766.2.16.1:1998 Examination for specific organismsFood and animal feeding stuffsHorizontal method for the detection and enumeration of Listeria monocytogenesDetection method (ISO 11290-1:1996) 17pp
Specifies a horizontal method for the detect ion of Listeria monocytogenes. (FT-024)
184pp
AS 1767.2.11999 Test MethodsDetermination of the breakdown voltage at power frequency (IEC 60156 Ed. 2.0 (Bilingual 1995)) 8pp
Sets out the method for determining the dielectric breakdown voltage at power frequency, of insulating liquids of nominal viscosity up to 350 mm2s-1 at 40C. Intended for use of acceptance testing on new liquids and for monitoring the condition of liquids in use. This Standard is identical with and has been reproduced from IEC 60156:1995. (EL-008)
Provides guidelines for the protection of persons and property from the hazards of lightning. Applies to conventional lightning protection systems consisting of air terminations, downconductors, earthing systems and surge protective devices. Also provides a comprehensive risk management process for the determination of the risk of damage due to lightning for a range of structures. (EL-024)
AS 1766.3.11991 Examination of specific productsMeat and meat products other than poultry 3pp
Sets out procedures for the microbiological examination of meat and meat products other than poultry. (FT-024)
AS/NZS 1766.3.5:1999 Examination of specific products Molluscs, crustaceans and fish, and products thereof
AS 1767.2.22008 Test methodsMeasurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity (IEC 60247 Ed. 3.0 (Bilingual 2004)) 20pp
Adopts IEC 60814, Ed. 2 (1997) to specify methods of determination the dielectric dissipation factor (tan (), relative permittivity and d.c. resistivity of single phase, insulating liquid materials at the test temperature. The methods are primarily intended for making reference tests on unused liquids but can also be applied to liquids in service in transformers, cables and other electrical apparatus. Simplified procedures are also included for routine testing. (EL-008)
7pp
18pp
Sets out procedures for the microbiological examination of molluscs, crustaceans, fish, and products derived primarily from these. (FT-024)
Specifies a method for determining the hardenability of steel by end quenching (Jominy test) by using a test piece 25 mm in diameter and 100 mm long. (MT-001)
49
AS 1774.12000
AS 1774.12000 Determination of cold compressive strength AS 1774.122001 Refractoriness under loadTemperatures of deformation at constant load with rising temperature 10pp
Sets out a procedure for determining the temperature(s) corresponding to specific deformations of a shaped refractory which is subjected to a constant compressive stress and an increasing temperature. (MN-007) manent linear change on heating, thermal conductivity, tensile strength and shot content of ceramic fibre products. (MN-007)
4pp
Sets out a method for determining the cold compressive strength of refractory bricks and monolithics. (MN-007)
3pp
Sets out a procedure for the determination of the cast coverage of castable refractory materials (MN-007)
3pp
8pp
Sets out a method for the determination of permanent linear and volume changes of refractories after drying, firing or reheating. The Standard is applicable to prefired and unfired refractories having either a regular or irregular shape. It is not applicable to carbon-bearing refractories or ceramic fibre products. (MN-007)
Sets out the drying and firing schedules to be used for test samples of different refractory materials. (MN-007)
13pp
Adopts ISO 8894-2:2007 to specify a method for the determination of the thermal conductivity of refractory products and materials. (MN-007)
4pp
Amendment 1 29 November 2001 Amendment 2 16 May 2002 Sets out a method for determining the modulus of elasticity compression, at a given temperature, for all formed refractories. (MN-007)
7pp
Sets out a method for the determination of the workability index of a mouldable refractory at room temperature. (MN-007)
24pp
Sets out methods for the preparation and testing of specimens of refractory mortars for determining a range of properties. (MN-007)
8pp
Sets out a method for determining the abradability index of a refractory material at room temperature. (MN-007)
AS 1774.342004 Guide to the determination of extrusion pressure and curing time of taphole clay 5pp
Provides recommended methods for the determination of the extrusion pressure and the curing time of taphole clays. (MN-007)
4pp
Sets out a method for measuring the true density of refractory products and raw materials. This Standard is identical with and has been reproduced from ISO 5018:1983. (MN-007)
5pp
Adopts ISO 8841:1991 to specify a method for the measurement of the permeability to gases of dense, shaped refractory products. (MN-007)
AS 1774.92007 Determination of resistance to the disintegrating effect of carbon monoxide (ISO 12676:2000) 8pp
Adopts ISO 12676:2000 to specify a method for determining the comparative resistance of refractory materials to carbon monoxide disintegration. (MN-007)
AS 1774.262008 Creep in compressionDeformation under constant load and constant temperature (ISO 3187:1989) 8pp
Adopts ISO 3187:1989 to specify a method for determining creep in compression. (MN-007)
24pp
Specifies requirements for the application and operation of abrasive wheels. Includes sections covering the storage, handling and mounting of abrasive wheels in addition to the conditions under which special operating speeds may be used. A model report form for abrasive wheel breakages is given in an appendix. (SF-012)
50
AS 18031998 General purpose detergents for use in the dairying industry 16pp
Sets out requirements for assessing the solubility of detergents in water. Appendices provide methods for determining degree of foaming, assessing cleaning performance and assessing corrosion potential. (FT-025)
12pp
Applies to milled or continuously cast soft lead sheet and strip intended for use in chemical plants and for roofs, flashings, weatherings, damp-proof courses, sound attenuation or other uses. Information on the application of the material for radiation shielding is given in an appendix. (MT-005)
AS 1807 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of test AS 1807.02000 List of methods and apparatus 11pp
Amendment 1 19 March 2002 Specifies requirements for all testing apparatus used in the testing of cleanrooms, workstations, safety cabinets and pharmaceutical isolators in accordance with the test methods set out in the AS 1807 series of Standards. Also provides definitions used in the specific test methods. (ME-060)
AS 1807.12000 Determination of air velocity and uniformity of air velocity in clean workstations, laminar flow safety cabinets and pharmaceutical isolators 2pp
Sets out the method of determining air velocity and uniformity of air velocity in a specified plane in clean workstations, laminar flow safety cabinets and pharmaceutical isolators. (ME-060)
3pp
Sets out the method for determining the relative humidity in cleanrooms within the temperature range of 5C to 40C and where the tolerance for relative humidity is not less than pm 4%. (ME-060)
AS 1799 Small Pleasure Boats Code AS 1799.11992 General requirements for power boats 25pp
Specifies requirements for determining maximum persons and power capacities and for stability, reserve buoyancy and general design features of power boats up to 15 m in overall length used as pleasure boats. It does not apply to boats used for commercial purposes or exclusively for racing, nor to canoes, kayaks or inflatable boats. (CS-001)
AS 1807.22000 Determination of performance of clean workstations, laminar flow safety cabinets and pharmaceutical isolators under loaded filter conditions 2pp
Sets out the method of determining air velocity, pressure drop across the filter, and motor blower current under loaded filter conditions in clean workstations, laminar flow safety cabinets and pharmaceutical isolators. (ME-060)
1p
Sets out the method for determining the illuminance at specified locations in cleanrooms, workstations, safety cabinets and pharmaceutical isolators. (ME-060)
12pp
Amendment 1 25 January 1991 Specifies structural requirements for aluminium pleasure boats having an overall length of 15 m or less. Plating thicknesses are calculated with allowances made for stiffeners and hull curvature. Guidance is given on selection of materials and fabrication methods. (CS-001)
AS 1807.32000 Determination of air velocity and uniformity of air velocity in laminar flow cleanrooms 2pp
Sets out the method for determining velocity and uniformity of air velocity in a specified plane within the work zone of laminar flow cleanrooms. (ME-060)
AS 1807.42000 Determination of performance of laminar flow cleanrooms under loaded filter conditions 2pp
Sets out the method for determining velocity and uniformity of air velocity in a specified plane within the work zone of laminar flow cleanrooms. (ME-060)
AS 1807.182000 Determination of vibration in workstations, safety cabinets and pharmaceutical isolators 2pp
Sets out the method for determining the vibration levels within a workstation, safety cabinet or pharmaceutical isolator with the air-handling and electrical equipment operating and with this equipment at rest. (ME-060)
30pp
AS 1807.202000 Determination of sound level at installed workstations, safety cabinets and pharmaceutical isolators 2pp
Sets out the method for determining the sound levels experienced by operators working at workstations, safety cabinets and pharmaceutical isolators, and the noise contribution of the cabinet or isolator to the environmental sound level. (ME-060)
Amendment 1 5 October 1999 Sets out the requirements for three types of protective helmets reflecting their intended use. It deals with construction of the helmet shell and helmet finish and includes methods of tests. Specific additional performance requirements are given for occupational protective helmets used in high temperature workplaces and for bushfire fighters' helmets based on industrial helmets. (SF-018)
AS/NZS 1802:2003 Electric cablesReeling and trailingFor underground coal mining purposes 45pp
Specifies the application, materials, construction, dimensions and tests for elastomer insulated and sheathed reeling and trailing electric cables, for use in underground coal mines. (EL-003)
AS 1807.212000 Determination of inward air velocity of Class I biological safety cabinets 2pp
Sets out the method for determining the velocity of the inflowing air through the work access opening of a Class I biological safety cabinet. (ME-060)
AS 1807.72000 Determination of integrity of HEPA filter installations not terminally mounted 3pp
Amendment 1 15 February 2002 Sets out the method for determining the overall integrity of an HEPA filter installation which is not terminally mounted in a cleanroom, workstation, safety cabinet or pharmaceutical isolator. (ME-060)
AS 1807.222000 Determination of air barrier containment of laminar flow safety cabinets 3pp
Sets out the method for determining the containment by the air barrier as indicated by the integrity of the air barrier and the velocity of the exhaust air in a laminar flow safety cabinet (laminar flow biological safety
51
AS 1807.232000
cabinet (Class II) or cytotoxic drug safety cabinet). (ME-060) Adopts ISO 6508-2:2005 to specify a method of verification of testing machines for determining Rockwell hardness scales A, B, C, D, E, F, G, H, K, N, T. (MT-006) Specifies the procedure for the selection of the standard withstand voltages for the phase-to-earth, phaseto-phase and longitudinal insulation of the equipment and the installation of three-phase a.c. systems having a highest voltage for equipment above 1 kV. It also lists the standardized values from which the standard withstand voltages shall be selected. This Standard is technically equivalent to and has been reproduced from IEC 71-1:1993. (EL-007)
AS 1824.21985 Application guide (IEC 60071-2 Ed. 2.0 (1976), IEC 60071-3) 37pp
Provides guidance in the application of AS 1824.1. It includes sections on voltage stresses in service, insulation withstand and protective devices, coordination between stresses, and withstand levels in various voltage ranges. Appendices cover surge transference through transformers, validity of tests described in AS 1824.1, examples of application and clearances in air to ensure a specified impulse withstand voltage in installations. (EL-007)
AS 1807.252004 Determination of gas tightness of outer shell of biological safety cabinets and pharmaceutical isolators 2pp
Sets out the method for determining the gastightness of the outer shell of a biological safety cabinet or a pharmaceutical isolator. (ME-060)
AS 1816 Metallic materialsBrinell hardness test AS 1816.12007 Test method (ISO 6506-1:2005, MOD) 16pp
Adopts ISO 6506-1:2005 with national modifications to specify the method for the Brinell hardness test for metallic materials and is applicable up to the limit of 650 HBW. (MT-006)
AS 1807.251990 Determination of gas tightness of outer shell of biological safety cabinets 1p Available Superseded
(ME-060)
AS/NZS 1826:2008 Electrical equipment for explosive gas atmospheresSpecial protectionType of protection 's' 21pp
Specifies requirements relating to the design, construction, testing and marking of electrical equipment which can be shown by test or assessment to be suitable for use in explosive gas atmospheres. It may be used by certification bodies in the testing and/or assessment of equipment for certification. (EL-014)
AS 1807.262004 Determination of air barrier containment of laminar flow safety cabinets Potassium iodidediscus test 5pp
Sets out the method for determining the containment of aerosols within laminar flow safety cabinets using the potassium iodide discus test. (ME-060)
9pp
6pp
Adopts ISO 6506-3:2005 to specify a method for the calibration of reference blocks to be used for the indirect verification of Brinell hardness testing machines as described in AS 1816.2. (MT-006)
21pp
Adopts ISO 185:2005 to specify properties of unalloyed and low-alloyed grey cast irons used for castings, which have been manufactured in sand moulds or in moulds with comparable thermal behaviour. (MT-001)
Specifies materials, design, performance, marking and packaging requirements and, in an appendix, provides information on use and storage and on the use of lubricants and spermicidal preparations. (CS-009)
12pp
AS/NZS 1809:1999 WoolThe preservation of the integrity of raw wool samples for display 4pp
Sets out the essential requirements necessary to maintain grab samples of raw wool obtained from bales for display purposes in sale by sample. Recommended preservation procedures are given, covering handling during sampling, storage, handling of drawn samples, sample display, and handling after display. (TX-012)
Adopts ISO 6506-4:2005 to specify a method for determining hardness value for use in tests in flat surfaces. (MT-006)
31pp
Adopts ISO 1083:2004 to specify the classification of ductile cast irons based on mechanical properties. (MT-001)
AS 1817 Metallic materialsVickers hardness test AS 1817.12003 Test methods (ISO 6507-1:1997, MOD) 110pp
Specifies the method for the Vickers hardness test for three ranges of test force for metallic materials. This Standard is an adoption with national modifications and is reproduced from ISO 6507-1:1997. (MT-006)
10pp
Adopts ISO 5922:2005 to specify the classification of malleable cast irons based on mechanical properties. (MT-001)
9pp
10pp
Specifies a method of verification of testing machines for determining Vickers hardness in accordance with AS 1817.1. This Standard is identical with and has been reproduced from ISO 6507-2:1997. (MT-006)
Specifies nine grades of flake graphite austenitic cast iron intended for subsequent use in the manufacture of castings. These grades of material are based on chemical composition and mechanical properties. This Standard is identical with and has been reproduced from ISO 2892:1973. (MT-001)
12pp
Applies to ingot lead or pig lead in an unwrought form to chemical composition requirements. Applications of the specified grades are given in an appendix, and a further appendix provides guidelines to purchasers when ordering to this Standard. (MT-005)
5pp
AS 1815 Metallic materialsRockwell hardness test AS 1815.12007 Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005) 28pp
Specifies the method for Rockwell and Rockwell superficial hardness test for metallic materials. (MT-006)
Specifies the method for the calibration of reference blocks to be used for the indirect verification of Vickers hardness testing machines as specified in AS 1817.2. This Standard is identical with and has been reproduced from ISO 6507-2:1997. (MT-006)
Specifies requirements for chemical composition and gives properties and typical applications for tin-lead and other tin-containing solder alloys. (MT-005)
3pp
Specifies requirements for flux-cored solder wire of circular cross-section, with solder alloys in accordance with AS 1834.1. An appendix provides a method for determining flux content. (MT-005)
AS 1815.22007 Verification and calibration of testing machine (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-2:2005) 18pp
AS 1824 Insulation co-ordination AS 1824.11995 Definitions, principles and rules (IEC 60071-1 Ed. 7.0 (Bilingual 1993)) 21pp
Amendment 1 5 March 1997
52
Sets out procedures for the installation of premoulded fibrereinforced plastic swimming pools complying with the requirements of AS/NZS 1838:1994, for above and below ground locations. (PL-041)
AS 1851.8 Supplement 11990 Automatic fire detection and alarm systemsSystem certificates and maintenance records (Supplement to AS 1851.8 1987) 78pp Available Superseded
Comprises records of certification of compliance, installer's statement, commissioning test report and a systems check list, followed by 36 sets of triplicate logbook report sheets printed on self-carbon paper with the top and second sheets perforated, 12 single detector test record sheets fixed penultimate in the book, and 24 duplicate alarm or fault signal response record sheets printed on self-carbon paper with the top copy perforated. The back cover incorporates a backing sheet for use with the self-carbon paper record sheets. It has a life of three years. (FP-002)
AS/NZS 1841 Portable fire extinguishers AS/NZS 1841.1:2007 General requirements 38pp
Provides general requirements for portable fire extinguishers, including the materials, design, construction, methods of manufacture, performance of the extinguisher and any associated gas container, including requirements for instructions and markings. (FP-003)
2pp
6pp
Specifies requirements for maintenance of fire hose reels. It includes requirements for 6-monthly and 12monthly inspections. (FP-007)
13pp
Sets out requirements for the regular maintenance, including inspection and testing procedures, of delivery lay flat fire hose whether manufactured in accordance with AS 2792 or otherwise. Procedures are given for annual and after-use testing and maintenance. An appendix sets out the format required for logbook reports and hose test records. (FP-009)
Sets out requirements for routine maintenance of sprinkler systems and includes precautions to be taken when systems are rendered inoperative. (FP-004)
10pp
Amendment 1 5 October 1997 Sets out requirements for regular maintenance, including inspection and testing procedures, of the fire hydrant installation designed and installed in accordance with AS 2419.1. Maintenance procedures are given for six levels of service; weekly, monthly, quarterly, yearly, three-yearly and six-yearly. Appendices set out a checklist of the maintenance procedures, and the formats required for logbook reports and hydrant test records. (FP-009)
7pp
Sets out suitable requirements for the regular maintenance of halon 1301 total flooding systems. (FP-011)
AS/NZS 1841.6:2007 Specific requirements for carbon dioxide type extinguishers 3pp
Sets out specific requirements for portable rechargeable fire extinguishers of the carbon dioxide type. (FP-003)
16pp
AS 1851.61997 Management procedures for maintaining the fire and smoke control features of airhandling systems 15pp Available Superseded
Specifies management procedures for controlling the inspection and testing of required fire and smoke control features associated with air-handling systems in buildings, to ensure their effective availability. Mandatory requirements for the frequency of simple inspections are laid down as Level 1 routines. Informative recommendations for more complex and detailed inspections are laid down in Levels 2, 3 and 4. (ME-062)
Sets out general requirements and schedules for regular inspection, pressure testing, recharging and general servicing of wheeled fire extinguishers. Levels of maintenance are on a time-lapse basis and range, depending on extinguisher type, from 6-monthly inspections to 6-yearly inspections. In addition, inspection and servicing are included for extinguishers located in aggressive environments. (FP-003)
2pp
Sets out requirements for portable non-rechargeable, stored-pressure fire extinguishers. (FP-003)
29pp
AS/NZS 1850:1997 Portable fire extinguishersClassification, rating and performance testing 17pp
Amendment 1 24 July 2001 Classifies extinguishers according to the general classes of fires for which they are suitable and gives a method of rating. Tests for Classes A, B, C, D, E and F are included. (FP-003)
Specifies the routine operational inspection and testing of fire protection pumpset systems. (FP-008)
6pp
8pp
AS 1851 Set2005 Maintenance of fire protection systems and equipment Set AS 18512005 Maintenance of fire protection systems and equipment 248pp
Amendment 1 26 July 2006 Amendment 2 23 May 2008 Sets out requirements for inspection, test, preventive maintenance and survey of fire protection systems and equipment. (FP-001)
Sets out requirements for the regular maintenance of fire door installations complying with AS 1905.1. It does not apply to fire-resistant roller shutters complying with AS 1905.2. (FP-001)
Specifies requirements for the regular maintenance of automatic fire detection and alarm systems that are not required to be connected to a fire alarm monitoring facility. (FP-002)
AS 1851.81987 Automatic fire detection and alarm systems 7pp Available Superseded
Specifies requirements for the regular maintenance, including inspection and testing procedures, for fire detection and alarm systems designed and installed in accordance with AS 1670. Maintenance procedures are given for three levels of service, weekly, monthly, and yearly. Appendices set out requirements for fire detectors, and the formats required for logbook reports and detector test records. (FP-001)
AS/NZS 1851.16:1997 Pyrogen fire extinguishing aerosol systems 9pp Available Superseded
Provides users of pyrogen fire extinguishing systems with the necessary requirements needed in the regular maintenance of such systems. (FP-011)
AS/NZS 1852 International Electrotechnology Vocabulary AS/NZS 1852.0:2000 Introduction and list of Parts of AS 1852 and IEC 60050 21pp
Lists the Parts of the International Electrotechnical Vocabulary (IEV). The IEV is a glossary of terms for electrotechnology issued as separate Parts, each deal-
53
AS 1852.1011978
ing with a specific field. Also indicates where there are equivalent Parts of AS 1852, and provides endorsement of Parts not published by Standards Australia or Standards New Zealand. The Parts of IEV may be purchased from Standards Australia and New Zealand. For a compilation of the terms and definitions, see the IEC Multilingual Dictionary on CD-ROM. (TE-013) lated technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013) lated technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
66pp
44pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for ea ch language. (TE-013)
AS 1852.5311975 Electronic tubes (IEC 60050-531 Ed. 1.0 (Bilingual 1974)) 167pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1852.1311988 Electric and magnetic circuits (IEC 60050-131 Ed. 1.0 (Bilingual 1978)) 37pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
42pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1852.1511988 Electric and magnetic devices (IEC 60050-151 Ed. 1.0 (Bilingual 1978)) 32pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1852.5811979 Electromechanical components for electronic equipment (IEC 60050-581 Ed. 1.0 (Bilingual 1978)) 93pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1852.4411985 Switchgear, controlgear and fuses (IEC 60050-441 Ed. 2.0 (Bilingual 1984)) 61pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1852.6011988 Generation, transmission and distribution of electricityGeneral (IEC 60050-601 Ed. 1.0 (Bilingual 1985)) 19pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1852.3011988 General terms on measurements in electricity (IEC 60050-301 Ed. 1.0 (Bilingual 1983))
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1852.4461988 Electrical relays (IEC 60050-446 Ed. 1.0 (Bilingual 1983)) 36pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1852.6021988 Generation, transmission and distribution of electricityGeneration (IEC 60050-602 Ed. 1.0 (Bilingual 1983)) 26pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1852.4611988 Electric cables (IEC 60050-461 Ed. 1.0 (Bilingual 1984)) 26pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1852.6031988 Generation, transmission and distribution of electricityPower system planning and management (IEC 60050-603 Ed. 1.0 (Bilingual 1986)) 30pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1852.6041988 Generation, transmission and distribution of electricityOperation (IEC 60050-604 Ed. 1.0 (Bilingual 1987)) 39pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1852.3211988 Instrument transformers (IEC 60050-321 Ed. 1.0 (Bilingual 1986)) 24pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and re-
AS 1852.5211988 Semiconductor devices and integrated circuits (IEC 60050-521 Ed. 1.0 (Bilingual 1984)) 90pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and re-
54
16pp
Provides performance requirements and specifications for the manufacture and application of decorative overlaid wood panels. It specifies dimensional tolerances and physical and mechanical properties for four types of decorative overlay applied to wood panel substrate, i.e., low pressure melamine (LPM), PVC film, paper foils, and wood veneers. Appendices provide information on handling and storage of decorative wood panels and selection and application of screw fasteners. (TM-005)
AS 1852.6911975 Tariffs for electricity (IEC 60050-691 Ed. 1.0 (Bilingual 1973)) 51pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 18552008 Methods for the determination of transverse tensile properties of round steel pipe 14pp
(MT-006)
9pp
Specifies requirements for the purpose of quality control in manufacture and performance requirements for the application of wet-processed fibreboards, including hardboards and softboards. (TM-005)
28pp
Specifies requirements for the electrodeposited coatings of silver used for engineering purposes that may be matt, bright, or semi-bright and are not less than 98% silver purity. (MT-009)
9pp
AS 1852.7011990 Telecommunications, channels and networks (IEC 60050-701 Ed. 1.0 (Bilingual 1988)) 29pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch, German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
AS 1858 Electrodes and fluxes for submerged-arc welding AS 1858.12003 Carbon steels and carbon-manganese steels 31pp
Sets up requirements for classification and designation systems for electrodes, fluxes and weld metal, and their chemical and physical properties. Also includes requirements for testing, packaging, marking and storage. (WD-002)
Specifies product requirements for the purposes of quality control in manufacture and performance requirements for the application of wet-processed fibreboards, including hardboards, medium-boards and softboards. (TM-005)
11pp
Sets out procedures for the selection, placement and fixing of particleboard flooring complying with AS/NZS 1859.1. Appendices provide check lists for areas of supervision and recommendations for subfloor ventilation. (TM-005)
AS 1852.7261983 Transmission lines and waveguides (IEC 60050-726 Ed. 1.0 (Bilingual 1982)) 101pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
30pp
Specifies classification systems and requirements for electrodes, fluxes, and weld metal, and their chemical and physical properties. It also specifies, where appropriate, requirements for testing, packaging, marking, and storage. Guidance on the classification system and the selection of electrodes and fluxes is given in an appendix. (WD-002)
AS 1852.8261983 Electrical installations of buildings (IEC 60050-826 Ed. 1.0 (Bilingual 1982)) 13pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
Amendment 1 7 May 2004 Amendment 2 3 February 2006 Specifies product requirements for the purpose of quality control in manufacture and the performance requirements in application of particleboard flooring intended to be installed in accordance with AS 1860. These requirements were originally covered in AS/NZS 1859.1:1997. (TM-005)
AS/NZS 1859 Reconstituted wood-based panels Specifications AS/NZS 1859.1:2004 Particleboard 9pp
AS 1860.22006 Installation
20pp
AS 1852.8411988 Industrial electroheating (IEC 60050-841 Ed. 1.0 (Bilingual 1983)) 154pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and the terms additionally in Dutch German, Italian, Polish, Swedish and Spanish. A separate index is given for each language. (TE-013)
Amendment 1 3 February 2006 Specifies product requirements for the purposes of quality control in manufacture and performance requirements for three classes of particleboards, i.e., standard (STD), moisture resistant (MR) and high performance (HP) particleboards. (TM-005)
Proposes procedures for the selection, placement and fixing of Class 1 particleboard flooring complying with AS/NZS 1860.1. Appendices propose check lists for areas of supervision, recommendations for subfloor ventilation, and recommendations on installation procedures for particleboard flooring for general domestic applications. (TM-005)
AS/NZS 1865:1997 Aluminium and aluminium alloysDrawn wire, rod, bar and strip 24pp
Specifies requirements for wrought aluminium and aluminium alloy drawn or cold-finished wire, rod, bar and strip products for general engineering purposes. Chemical composition, mechanical properties and dimensional tolerances are specified. Appendices provide purchasing guidelines, fabrication characteristics and application data, and related composition specifications. (MT-003)
9pp
Amendment 1 16 January 2003 Specifies product requirements for the purposes of quality control in manufacture and performance requirements for three classes of particleboards, i.e. standard (STD), moisture resistant (MR) and high performance (HP) particleboards. (TM-005)
AS/NZS 1866:1997 Aluminium and aluminium alloysExtruded rod, bar, solid and hollow shapes 37pp
Specifies requirements for aluminium and aluminium alloy extruded rod, bar, solid and hollow shape products for general engineering purposes. Chemical composition and mechanical properties are specified, and allowable tolerances on dimensions are included for rod, bar, solid shapes, and Class A, Class B, Class C and Class D hollow shapes. Examples illustrating the use of tolerance are included. (MT-003)
12pp
Amendment 1 3 February 2006 Amendment 2 19 April 2006 Specifies product requirements for the purposes of quality control in manufacture and performance requirements for dry-processed fibreboards, including ultra-low-density, low-density, medium-density and high-density fibreboards. (TM-005)
AS 1852.8811988 Radiology and radiological physics (IEC 60050-881 Ed. 1.0 (Bilingual 1983)) 164pp
Along with the other parts of AS 1852, this Standard provides glossaries of terms used in electrical and related technologies, with definitions in English and French, and in some cases Russian and German, and
12pp
Amendment 1 16 January 2003 Specifies product requirements for the purposes of quality control in manufacture and performance requirements for dry-processed fibreboards, including ultra-low-density, low-density, medium-density and high-density fibreboards. (TM-005)
55
AS/NZS 1869:1996
AS/NZS 1869:1996 Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas 23pp
Specifies requirements for hose and hose assemblies for liquefied petroleum gases (LPG), natural gas, town gas manufactured from oil products, tempered liquefied gas, and simulated natural gas in transport, automotive, industrial and domestic applications. It provides for hose up to and including 100 mm inside diameter and 2.6 MPa maximum working pressure. (RU-001)
AS 1885 Measurement of occupational health and safety performance AS 1885.11990 Describing and reporting occupational injuries and disease (known as the National Standard for workplace injury and disease recording) 24pp
Deals with the recording of workplace injury and disease, and is intended for use by both large and small organizations. It includes definitions as well as an explanation of the data items which are required to be recorded. A section dealing with interpretation and analysis of the recorded information is included. These measures include incidence rate, frequency rate, average time lost rate, as well as time series analysis and cross tabulations. (SF-002)
69pp
Specifies requirements and sets out recommendations for the selection, safe use and maintenance of industrial fall-arrest systems and devices based on the use of safety harnesses (including belts), horizontal life lines and rails, fall-arrest devices, and associated lanyards, connectors, anchorages and fittings. (SF-015)
AS/NZS 1873 Powder-actuated (PA) hand-held fastening tools AS/NZS 1873.1:2003 Selection, operation and maintenance 10pp
Provides guidance on the selection, operation and maintenance of powder-actuated (PA) hand-held fastening tools. (SF-029)
12pp
AS 1885.1 Supplement 11991 Describing and reporting occupational injuries and diseaseWorkplace injury and disease recording form (Supplement to AS 1885.11990) 400pp
Comprises the recording form given in AS 1885.1 published in pad form to assist in gathering the data required by AS 1885.1. It is double-sided single page form and is supplied with the codes required for certain data items. (SF-002)
Specifies the minimum requirements for the design and construction of portable metal ladders rated for industrial or domestic use. It applies to single, extension, multipurpose, step and trestle ladders, representing a combination of these types. A complete range of test methods are included as appendices. Ladder accessories such as ladder-levellers, stabilizers, stand-off devices, ladder jacks and straps are not covered. (SF-034)
Sets out requirements for the design, construction and performance of both direct-acting and indirect-acting powder-actuated (PA) hand-held tools. Appendices include methods for measuring the velocity of fasteners discharged from PA tools and for determining the ability of a PA tool to resist accidental firing when dropped. (SF-029)
AS 1892.21992 Timber
28pp
66pp
Sets out the minimum requirements for the materials, design and construction of timber ladders rated for domestic or industrial use. It applies to single, extension, step and trestle ladders as well as to platform step ladders and domestic extension step ladders. Methods for grading timber stiles and examples of labels that may be used to convey safety warnings are provided in appendices. (SF-034)
5pp
Sets out requirements, colour identification and relative strengths of explosive charges intended for use in powder-actuated (PA) hand-held fastening tools complying with AS/NZS 1873.2. (SF-029)
Provides an alphabetical listing of terms and definitions relating to plastics which is identical to ISO 472, with an appendix of additional terms used in Australia. (PL-010)
90pp
6pp
AS 1886 Supplement 11994 Glossary of terms relating to plasticsPlastics recycling terminology (Supplement to AS 18861991) 6pp
Provides definitions of terms used within Australia that relate to the recycling of plastics. (PL-010)
Sets out requirements for fasteners intended for use with powder-actuated (PA) hand-held fastening tools complying with AS/NZS 1873.2. (SF-029)
Specifies the minimum requirements for the design and construction of portable reinforced plastic ladders rated for industrial or domestic use. It applies to single, extension, multipurpose, step and trestle ladders representing a combination of these types. A complete range of the test methods are included as appendices. Ladder accessories such as ladder-levellers, stabilizers, stand-off devices, ladder jacks and straps are not covered. (SF-034)
9pp
Specifies requirements for thermally released links for general fire protection services in buildings, which are commonly used in fire dampers, fire shutters, smoke and heat ventilators and fire doors. This Standard includes requirements for construction, testing, identification and marking of thermally released links. The Standard does not apply to links incorporated in sprinkler heads. (ME-062)
12pp
Sets out the minimum recommended safe practices and requirements for the selection, safe use and care of portable ladders constructed from any material. (SF-034)
AS/NZS 1891 Industrial fall-arrest systems and devices AS/NZS 1891.1:2007 Harnesses and ancillary equipment 43pp
Amendment 1 31 October 2007 Amendment 2 19 May 2008 Specifies requirements for the materials, design, manufacture and testing of harnesses, lanyards, pole straps and associated equipment including connecting devices and personal energy absorbers for industrial fall-arrest purposes. (SF-015)
AS 18931977 Code of practice for the guarding and safe use of metal and paper cutting guillotines 32pp
Outlines the general principles of guarding requirements, with specific requirements for the guarding of different types of machine. Fixed, interlocked, automatic and electronic guards are included. Illustrations of suitable guards and guarding details are included. (SF-022)
10pp
Provides a range of standard clamps for use in electrical installations for connection of earth and bonding conductors to metal pipes and metal cable sheaths of external diameter 11 to 105 mm. Performance requirements and certain mechanical features applicable to all clamps, including special clamps fabricated on site and those outside the dimensional range provided, are specified. (EL-004)
AS 18941997 The storage and handling of non-flammable cryogenic and refrigerated liquids 55pp
Amendment 1 5 September 1999 Sets out requirements and recommendations for the storage and handling non-flammable cryogenic liquids at temperatures below minus 90C and non-flammable refrigerated liquids at or below minus 15C which are classified as Class 2.2 in the ADG Code. Special requirements for the storage and handling of liquefied oxygen, nitrous oxide, nitrogen, argon, helium and carbon dioxide are provided. The properties and hazards of these liquids, precautions for their handling and an outline of first aid procedures are discussed. (CH-009)
23pp
AS 18831992 Guide to maintenance and supervision of insulating oils in service (IEC 60422 Ed. 2.0 (Bilingual 1989)) 34pp
Provides guidance in monitoring, evaluating and maintaining the condition of mineral insulating oil used in electric power equipment by recommended standardized tests, procedures and treatments. (EL-008)
Specifies design and performance requirements for systems and associated component hardware for horizontal lifelines and rails used for fall-arrest purposes. The Standard covers systems using either rigid rails or flexible lines. Test methods are given in appendices. (SF-015)
AS/NZS 1891.2 Supplement 1:2001 Horizontal lifeline and rail systems Prescribed configurations for horizontal lifelines (Supplement to AS/NZS 1891.2:2001) 20pp
Specifies a range of system configurations which have been determined by investigation to meet the performance and safety requirements of AS/NZS 1891.2. It also specifies hardware and installation requirements for such systems. (SF-015)
AS 18841985 Floor coveringsResilient sheet and tiles Laying and maintenance practices 13pp Obsolescent
Covers laying and fixing of unbacked floor coverings in all forms including semi-rigid PVC, flexible PVC, linoleum, cork, and rubber. It deals with the site inspection, requirements for concrete, timber, particleboard or plywood subfloors, installation of underlays, conditioning of floor covering and subfloor, laying and maintenance procedures. A method for testing dryness of concrete subfloors is given in an appendix. (PL-015)
20pp
Specifies requirements for the design and performance of fall-arrest devices comprising those which travel down either a fixed or flexible anchorage line, and those which pay out an anchorage line. (SF-015)
56
stalled for private use. It is also applicable for public use if consideration is taken of the differing dynamics of public swimming pools to private swimming pools. (CS-034)
20pp
AS 19001991 Flotation toys and swimming aids for children 11pp Available Superseded
Amendment 1 16 August 1993 Specifies requirements for flotation toys and swimming aids intended for use by children aged up to 15 years in recreational activities and to assist in swimming tuition. Does not deal with buoyancy aids intended for lifesaving nor with buoyancy aids specifically designed for therapeutic use or use by disabled persons. Includes requirements for warning notices and other marking. (CS-021)
Amendment 1 12 June 2000 Specifies design, construction and performance requirements for child-resistant fences and gates intended primarily for use in preventing access to swimming pools by young children. (CS-034)
AS 1926.21995 Location of fencing for private swimming pools 5pp Available Superseded
Sets out options for the location of fencing that provides barriers in restricting the access to private swimming pools of young children. (CS-034)
4pp
AS 1905 Components for the protection of openings in fire-resistant walls AS 1905.12005 Fire-resistant doorsets 41pp
Specifies requirements for design, construction and installation of doorsets used to protect openings in fireresistant walls and partitions. Compliance is based on prototype testing in accordance with AS 1530.4. Labelling requirements are included. (FP-019)
Sets out procedures for handling, fitting, installation and finishing of timber doorsets specified in AS 2689. It covers installation in cavity masonry walls, solid masonry walls and timber-framed and metal-framed walls. A symbolic designation of the direction of closing and faces of doors is included. It does not apply to the installation of timber doorsets in demountable partitions or fire-resistant doorsets. (BD-021)
6pp
Sets out requirements for skimmer boxes and other permanent water inlets and outlets in swimming pools. (CS-034)
AS 19102004 Water supplyFloat control valves for use in hot and cold water 17pp
Amendment 1 20 July 2006 Specifies requirements for active float control valves for use in water supply systems where the normal working temperature does not exceed 95C and the continuous working pressure extends up to a maximum of 1.4 MPa for a range of nominal sizes from DN 6 to DN 80. (WS-001)
44pp
Specifies requirements for the design, construction and installation of fire-resistant doorsets including transom panels but excluding lift-landing doors and access panels, used to protect openings in walls and partitions required to resist the passage of fire. Shows the variation between Australia and New Zealand in regard to the certification, marking and identification of doorsets as determined by the building codes and practice in both countries. A series of tests by which the physical capacity of the doorsets may be measured is also included. (FP-019)
46pp
Specifies safety requirements for the design, assembly, and performance of all types of pedal bicycles and subassemblies of pedal bicycles having a wheelbase of 640 mm or greater, including power-assisted bicycles with engines up to 0.2 kW, but excludes track racers and one-of-a-kind bicycles. It also specifies requirements for the instructions to be given in a manual on use and maintenance, and for the instructions for the assembly of bicycles offered for sale in a partially assembled state. (CS-010)
7pp
Specifies requirements for design, construction and installation of vertically operating roller shutters intended to protect trafficable openings in fire-rated walls. Compliance is based on prototype testing in accordance with AS 1530.4. Labelling requirements are included. (FP-019)
AS 19282007 Child-resistant packagingRequirements and testing procedures for reclosable packages (ISO 8317:2003, MOD) 22pp
Sets out requirements and testing procedures for reclosable child-resistant packaging. Reproduced from ISO 8317:2003 and its technical corrigendum, with Australian variations based on smaller population size. (HE-016)
8pp
AS 19211976 Airconditioning and ventilation in ships' cabins and living spaces of merchant ships 32pp
Amendment 1 6 February 1984 Specifies the design conditions for the airconditioning of cabins and living spaces of merchant ships operating on the Australian coast, also in all global waters except Arctic and Antarctic waters in winter, and provides data and suitable methods of calculation for use in designing to meet these conditions. Appropriate requirements are specified for other spaces which may be ventilated from the air-conditioning system, or which may affect the operation of the system. Recommendations are also made for the design of airconditioning systems for ships operating in restricted geographical locations on the Australian coast, e.g. ports and adjacent waters. Charts of recordings of dry and wet bulb temperatures over a number of years are included for nine Australian ports. (ME-059)
Specifies requirements for design, construction and installation of roller shutters intended to protect trafficable openings in fire-rated walls. Compliance is based on prototype testing in accordance with AS 1530.4. Certification and labelling requirements are included. Design details of a typical 2-hour fire-rated roller shutter assembly are provided in an appendix. (FP-019)
18pp
Specifies requirements for reclosable and non-reclosable packages, designated as being resistant to opening by children. Intended to be particularly applicable to the packaging of chemicals where child-resistant packaging is required. (HE-016)
AS/NZS 1906 Retroreflective materials and devices for road traffic control purposes AS/NZS 1906.1:2007 Retroreflective sheeting 51pp
Specifies the performance requirements for retroreflective sheeting used in the manufacture of road signs and related traffic control devices. It does not apply to retroreflective pavement markings. (MS-049)
AS 1926 Set2007 Swimming pool safety Standards Set AS 1926 Swimming pool safety AS 1926.12007 Safety barriers for swimming pools
72pp
AS 1931 High-voltage test techniques AS 1931.11996 General definitions and test requirements (IEC 60060-1 Cor Ed. 2.0 (1992), IEC 600601 Ed. 2.0 (Bilingual 1989)) 59pp
Applies to tests with direct, alternating and impulse voltage and with impulse currents on equipment having its highest voltage above 1 kV. This Standard is identical with and has been reproduced from IEC 601:1989 and its Corrigendum:1992. (EL-007)
30pp
Amendment 1 5 May 2008 Establishes safety requirements for design construction and performance of barriers, windows and doorsets for swimming pools of the types normally in-
57
AS 1931.21996
AS 1931.21996 Measuring systems (IEC 60060-2 Ed. 2.0 (Bilingual 1994)) 64pp
Amendment 1 5 March 1997 Applies to complete measuring systems and to their components for the measurement of high-voltages and currents during tests with direct voltage, alternating voltage, lightning and switching impulse voltages and for tests with impulse currents. This Standard is identical with and has been reproduced from IEC 602:1994. (EL-007) and handling, storage in tanks, fuel dispensing, piping and tank auxiliaries, operations and fire protection facilities. Appendices deal with tank venting, combustion characteristics, fire exposure protection, gas-freeing precautions and principles, and power station and grid transformers. (ME-017)
AS 1961.52004 Castors for manually propelled equipment for institutional applications (ISO 22881:2004) 17pp
Adopts ISO 22881:2004 which specifies technical requirements, appropriate dimensions and requirements for testing. Applies to castors and wheels that may including braking and/or locking devices, specifically for manually propelled use in an institutional environment such as shops, restaurants, hotels, educational buildings and hospitals. Excludes hospital bed castors. (ME-031)
AS 19462002 Sterile hypodermic needles for single use (ISO 7864:1993) 11pp
Specifies requirements for sterile hypodermic needles for single use of nominal outside diameters 0.3 mm to 1.2 mm. Does not apply to dental needles. It is identical to, and reproduced from, ISO 7864:1993. (HE-009)
AS/NZS 1935 AcousticsDetermination of sound absorption coefficient and impedance in impedance tubes AS/NZS 1935.1:1998 Method using standing wave ratio (ISO 10534-1:1996)
12pp
21pp
Adopts ISO 22882 which specifies technical requirements, appropriate dimensions and requirements for testing. Applies to swivel castors for hospital beds with a wheel diameter of 100 mm or more, which have a central locking device. (ME-031)
Specifies a method for the determination of the sound absorption coefficient, reflection factor and surface impedance or surface admittance of materials and objects. This Standard is technically equivalent to and has been reproduced from ISO 10534-1:1996. (AV-004)
20pp
AS 1937 Methods of test for sealers and adhesives for automotive purposes AS 1937.11991 Determination of flow properties in absolute units 6pp
Sets out the method for evaluating in terms of absolute units the flow properties of sealers, adhesives, coating materials and similar products used in the automotive industry. (CH-017)
24pp
Specifies words, phrases and symbols detailing the care treatment of upholstery, garments and other articles in order to supply relevant and accurate information to a prospective purchaser at the point of sale. It states what information should be included on a permanent label and what instructions may be supplied separately in lieu of a permanent label. It specifies the method of labelling yarn and the method by which care instructions for piece goods are to be made available. (CS-004)
Adopts ISO 22883:2004 which specifies technical requirements, appropriate dimensions and requirements for testing. Applies to castors and wheels (which may include accessories) for manually propelled or power towed industrial applications up to 1.1 m/s (4 km/h). Does not apply to castors and wheels for furniture, swivel chairs, institutional, hospital beds and driven applications. (ME-031)
AS 1961.82004 Applications over 1.1m/s (4km/h) and up to 4.4m/s (16km/h) (ISO 22884:2004) 14pp
Adopts ISO 22884:2004 which specifies technical requirements, appropriate dimensions and requirements for testing. Applies to castors and wheels (which may include accessories) specifically for manually propelled or power towed industrial applications at speeds over 1.1m/s (4km/h) and up to 4.4m/s (15km/h). Does not apply to pneumatic wheels and drive wheels. (ME-031)
Sets out characteristics, test methods and packaging for the three grades of automotive brake fluid of the non-petroleum type, for use in the hydraulic braking systems of motor vehicles. (CH-004)
AS 1939 Supplement 11990 Degrees of protection provided by enclosures for electrical equipment (IP Code)Wallchart 1 (Supplement 1 to AS 19391990) 1p
Displays in text and diagrams the meanings of the two characteristic numerals of the IP Code specified in AS 19391990, in particular the dual protection of persons and of equipment indicated by the first numeral and the protection against ingress of water indicated by the second numeral. It is intended as an aid to be read in conjunction with AS 1939. Refers to AS 1939 Supplement 2. (EL-026)
7pp
AS/NZS 1972:2006 Electric cablesUnderground coal mines Other than reeling and trailing 37pp
Specifies the construction of cables for fixed apparatus, armoured high voltage cables, feeder cables, machine cables and mine shaft winder cables for underground use in coal mines. (EL-003)
Specifies the requirements for automotive brake fluids of silicone type for use in hydraulic braking systems of motor vehicles. In this Standard, the requirements of Grade 4 (equivalent to DOT 5) are specified, along with methods of test. Grades 1, 2 and 3 brake fluid have been deleted. (CH-004)
AS 1961 Castors and wheels AS 1961.12004 Vocabulary, symbols and multilingual terminology (ISO 22877:2004) 41pp
Adopts ISO 22877:2004 which specifies terms and symbols relating to castors and wheels. (ME-031)
AS 19731993 Pneumatic tyresPassenger car, light truck, and truck/busRetreading and repair processes 31pp
Sets out a Code of Practice for the retreading of pneumatic diagonal and radial ply tyres including requirements for initial inspection, processing, marking and final inspection. Also sets out requirements for in-service repairs to tyres and repairs made in conjunction with the retreading process. (ME-056)
AS 1939 Supplement 21990 Degrees of protection provided by enclosures for electrical equipment (IP Code)Wallchart 2 (Supplement 2 to AS 19391990) 1p
Displays the various combinations of first characteristic numeral and additional letter (indicating the protection of persons and the protection of equipment against solid foreign objects) included in the IP Code. Specifies and depicts basic details of access and object probes. Is intended as an aid to be read in conjunction with AS 1939. Refers to AS 1939 Supplement 1 for the second characteristic numeral. (EL-026)
24pp
AS 19402004 The storage and handling of flammable and combustible liquids 173pp
Amendment 1 25 November 2004 Amendment 2 22 November 2006 Provides requirements and recommendations for the design, construction and operation of installations where flammable or combustible liquids are stored and handled. Separate sections provide requirements for minor storage, package storage, and storage of liquids in tanks, as well as, fire protection and emergency management. Requirements for the bulk storage of potable alcohols, and recommendations for blending plants, are provided in appendices. (ME-017)
Adopts ISO 22878:2004 which specifies test methods and apparatus to be sued to check the performance of castors and wheels. (ME-031)
20pp
AS 19401993 The storage and handling of flammable and combustible liquids 103pp Available Superseded
Provides requirements for the planning, design, construction, and safe operation of all installations in which flammable or combustible liquids are stored or handled. In separate sections it deals with minor storage, package storage
AS 1961.42004 Castors for furnitureCastors for swivel chairs (ISO 22880:2004) 12pp
Adopts ISO 22880:2004 which specifies technical requirements, appropriate dimensions and requirements for testing. Applies to castors with or without braking devices that will normally be used on swivel chairs. (ME-031)
Applies to straight cylindrical, bent cylindrical and circular vials, and covers precise and coarse grades. Performance requirements are specified and an appendix describes methods of testing for each characteristic. Information on the use of vials is also given. (ME-027)
20pp
Specifies materials, properties, basic design details, accuracy and finish of vernier callipers reading to 0.1 and 0.05 mm in sizes up to 1000 mm and to 0.02 mm in sizes up to
58
AS 2001.2.3.12001 Physical testsDetermination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:1999) 13pp
Specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method. (TX-020)
that are in a state of relaxation by conditioning in a standard atmosphere for testing, free from applied tension. (TX-020)
AS 2001.2.131987 Physical testsDetermination of mass per unit area and mass per unit length of fabrics (ISO 3801:1977) 2pp
Sets out a method for the determination of mass per unit area of fabrics. The mass per unit length may also be calculated. The method is applicable to textile fabrics in all forms. (TX-020)
Specifies the requirements for fusion welding of steel castings where it is used for the rectification and/or modification of a casting as part of the normal production process, service applications and for joining together of steel castings by fusion welding, where the subsections of the final fabrication are designed for the foundry planning stage. (MT-001)
AS 2001.2.3.22001 Physical testsDetermination of maximum force using the grab method (ISO 13934-2:1999, MOD) 13pp
Specifies a procedure for the determination of maximum force of textile fabrics known as the grab test. (TX-020)
9pp
Specifies the construction, tests, current rating and duty cycle of welding cables. (EL-003)
AS 2001.2.41990 Physical testsDetermination of bursting pressure of textile fabricsHydraulic diaphragm method (ASTM D3786, BS 4768, ISO 2960:1974) 7pp
Specifies two methods of determining the bursting pressure of both wet and dry fabrics of all types. (TX-020)
32pp
Describes types of gauges and gauging procedures to be used for the assessment of dimensional performance of plain workpieces up to and including 500 mm. Specific reference is made to plain cylindrical surfaces, but the principles described may be used for other geometric forms. (ME-027)
AS 2001.2.51991 Physical testsDetermination of the number of threads per unit length in woven fabric 4pp
Sets out three techniques for determining the number of threads per unit length in woven fabrics. The first involves dissection, which is suitable for all woven structures, including complicated structures where individual threads are not readily distinguishable. The second involves a traversing thread counter which is suitable for all woven fabrics in which the threads or pattern repeats are distinguishable. The third involves a counting glass which is suitable for fabrics with 25 or more threads per centimetre, where the threads or pattern repeats are distinguishable. (TX-020)
AS 2001.2.151989 Physical testsDetermination of thickness of textile fabrics (BS 2544, ISO 5084:1977) 7pp
Sets out methods for determination of the thickness of textile fabrics. Methods are given to determine the static and dynamic thicknesses of woven, non-woven, and knitted textile fabrics, and coated fabrics. (TX-020)
AS 19981977 A6 microfiche for engineering and other data (excluding computer output microfiche) (ISO 2707, ISO 2708) 8pp
Specifies the physical characteristics, requirements in the micro-image and non-micro-image areas, and the quality of A6 microfiche of uniform division having either a 6-frame or a 98-frame format. (MS-004)
AS 2001.2.161987 Physical testsDetermination of water repellency of textile surfacesSpray rating test 3pp
Sets out a procedure for determining the resistance of textile surfaces to wetting by water. It is applicable to all fabrics which may or may not have been given a water-repellent finish or coating. It is not intended for use in predicting rain penetration resistance of fabrics. (TX-020)
AS ISO 19992003 AcousticsDetermination of occupational noise exposure and estimation of noiseinduced hearing impairment (ISO 1999:1990) 17pp
Provides a method for calculating the expected noiseinduced permanent shift in the hearing threshold levels of adult populations due to various levels and duration of noise exposure. This Standard is identical with and reproduced from ISO 1999:1990. (AV-003)
AS 2001.2.62001 Physical testsDetermination of the number of wales and courses per unit length in knitted fabric 6pp
Specifies three methods for determining the number of wales and courses; pin gauge for all knitted fabric, traversing thread counter for those where the wales or courses or pattern repeats are readily distinguishable and counting glass for those with 5 or more wales or courses per centimetre. (TX-020)
AS 2001.2.171987 Physical testsDetermination of resistance of fabrics to water penetration Hydrostatic pressure test 3pp
Sets out a procedure for determining the resistance of textile fabrics to penetration by water at a constant rate of increase of pressure. It is applicable to all fabrics which are water-repellent or coated to impart resistance to water penetration. (TX-020)
AS 2001 Methods of test for textiles AS 2001.11995 Conditioning procedures (ISO 139:1973)
AS 2001.2.71987 Physical testsDetermination of breaking force and extension of yarns (ISO 2062:1972) 7pp 26pp
Sets out a method for determining the breaking force and breaking extension of various types of yarn, primarily taken from skeins or packages. The method can be used for yarns extracted from a fabric. (TX-020)
AS 2001.2.181987 Physical testsDetermination of resistance of fabrics to water penetration Cone test 2pp
Sets out a method for determining the resistance of textile fabrics to penetration by water under static conditions. It is applicable to all fabrics which are water-repellent or coated to impart resistance to water penetration. (TX-020)
Specifies four procedures for conditioning samples and specimens of textile materials prior to testing. The various procedures are intended to cater for a reference method which is to be used in cases of dispute; a method for testing materials which are relatively dry; a method for high volume testing, and a method for rapid conditioning. (TX-020)
AS/NZS 2001.1.2:1998 GeneralUniversal yarn count system (Tex System) (ISO 1144:1973) 5pp
Sets out a universal numbering system to designate the fineness or coarseness of textile fibres, yarns, intermediate products (e.g. tops and rovings) and other products of similar structures. (TX-020)
AS 2001.2.82001 Physical testsDetermination of tear force of fabrics using the ballistic pendulum method (Elmendorf) (ISO 13937-1:2000) 10pp
Describes a method known as the ballistic pendulum (Elmendorf) method for the determination of tear force of textile fabrics. (TX-020)
AS 2001.2.191988 Physical testsDetermination of bursting force of textile fabricsBall burst method (ASTM D3787) 3pp
Sets out a method for determining the bursting force of textile fabrics in equilibrium with the standard atmosphere for testing and of fabrics in the wet state. The method uses a tensile machine based on the constant rate of extension principle. It is based on ASTM D3787 and is particularly applicable where fabric stretch is an important characteristic. (TX-020)
AS 2001.2.11988 Physical testsDetermination of mean fibre diameter of textile fibres by measurement of projected images (ISO 137:1975) 6pp
Sets out a procedure for determining the mean diameter of fibres of circular and near-circular cross-section by measuring highly magnified images projected onto a viewing screen. The method is applicable to all fibres of circular or near-circular cross-section. It may be applied to wool fibres taken from all stages of processing, as well as to some man-made fibres, e.g. polyamides, polyesters and glass, and to a limited number of polyacrylic and regenerated cellulose type fibres. The method is not applicable to yarn and fibre embedded in latex or bitumen. This Standard was largely based on ISO 137. (TX-020)
AS 2001.2.101986 Physical testsDetermination of the tear resistance of woven textile fabrics by the wing-rip method 2pp
Sets out a procedure for determining the tear resistance of woven textile fabrics by the wing-rip method. (TX-020)
AS 2001.2.211989 Physical testsDetermination of seam opening due to the application of force in the transverse direction 5pp
Provides a method for determining the seam opening of a given seam, due to the application of a standard force within the fabric plane at the seam and perpendicular to the seam direction. It is applicable to seams made in woven, non-woven and knitted fabrics. (TX-020)
59
AS 2001.2.222006
AS 2001.2.222006 Physical testsDetermination of yarn slippage in woven fabric at a standard stitched seam 6pp
Describes a method for determining slippage of yarns in a woven fabric at a standard stitched seam. (TX-020)
Specifies test methods for determining the colourfastness of textiles when subjected to hot pressing. Nine tests are described comprising tests for dry, damp and wet pressing, each at three temperatures. (TX-020)
AS 2001.2.231990 Physical testsDetermination of linear density of textile yarn from packages (ISO 2060:1972) 5pp
Provides a general method for determining the linear density of all types of textile yarn in package form, applicable where the determination method is not set out in an individual Australian Standard for the specific product. (TX-020)
AS 2001.2.301994 Physical testsDetermination of abrasion resistance of coated textile fabrics (oscillatory cylinder method) 5pp
Specifies a method for the determination of the resistance to abrasion of coated textile fabrics using an oscillatory cylinder machine. (TX-020)
AS 2001.4.111982 Colourfastness testsDetermination of colourfastness to bleaching with sodium hypochlorite (ISO 105 N01) 3pp
Sets out a method for determining colourfastness to sodium hypochlorite solution as normally used in commercial bleaching. (TX-020)
AS 2001.2.25.12006 Physical testsDetermination of the abrasion resistance of fabrics by the Martindale methodMartindale abrasion testing apparatus (ISO 12947-1:1998, ISO 12947-1:1998/Cor 1:2002) 13pp
Describes requirements for the Martindale testing apparatus and auxiliary materials for use in the test methods specified in parts 2 to 4 of ISO 12947 for determination of the abrasion resistance of fabrics. (TX-020)
AS 2001.2.25.22006 Physical testsDetermination of the abrasion resistance of fabrics by the Martindale methodDetermination of specimen breakdown (ISO 12947-2:1998, ISO 12947-2:1998/Cor 1:2002) 12pp
Describes the inspection interval to breakdown of specimens covering all textile fabrics including nonwovens apart from fabrics where the specifier indicates the end performance as having a low abrasion wear life. (TX-020)
AS 2001.3.31978 Chemical testsDetermination of solubility of wool in alkali (ASTM D1283, DEF (AUST) 37 Method D) 4pp
Describes procedures in which the solubility of wool fibre in alkali is determined from the extent of change in the chemical properties of wool brought about by the processing and exposure to extreme heat and light. The method may be used when small quantities of polyamide fibre are present in textile blends. The solubility is expressed on the basis of oven dry mass. (TX-020)
AS 2001.2.25.32006 Physical testsDetermination of the abrasion resistance of fabrics by the Martindale methodDetermination of mass loss (ISO 12947-3:1998, ISO 12947-3:1998/Cor 1:2002) 8pp
Describes the determination of the mass loss of specimens covering all textile fabrics including nonwovens apart from fabrics where the specifier indicates the end performance as having a low abrasion wear life. (TX-020)
AS 2001.4.212006 Colourfastness testsDetermination of colourfastness to light using an artificial light source (mercury vapour, tungsten filament, internally phosphor-coated lamp) 6pp
Defines a method for determining the colourfastness of textiles to light, using an artificial light source. (TX-020)
AS 2001.2.25.42006 Physical testsDetermination of the abrasion resistance of fabrics by the Martindale methodAssessment of appearance change (ISO 12947-4:1998, ISO 12947-4:1998/Cor 1:2002) 8pp
Describes the assessment of the appearance change of specimens covering all textile fabrics including nonwovens and fabrics where the specifier indicates the end performance as having a low abrasion wear life. (TX-020)
AS 2001.3.62005 Chemical testsDetermination of cuprammonium fluidity of cotton and cellulosic man-made fibres 8pp
Sets out a method for determining the cuprammonium fluidity of cotton, cupro, modal, viscose or deacetylated acetate fibre in a standard solution of cuprammonium hydroxide using an outflow viscometer. (TX-020)
AS 2001.4.221991 Colourfastness testsDetermination of colour change due to flat abrasion (frosting) of textile fabrics (screen wire method) (AATCC Test Method 119) 5pp
Specifies a method for the determination of colour change in textile fabrics due to flat abrasion using a screen wire abradant. (TX-020)
AS 2001.4.231995 Colourfastness testsDetermination of colour change due to flat abrasion (frosting) of textile fabrics (emery method) (AATCC Test Method 120) 4pp
Sets out a method for determining the change in colour of a woven or knitted textile fabric due to flat abrasion. (TX-020)
AS 2001.2.261990 Physical testsDetermination of abrasion resistance of textile fabrics (flexing and abrasion method) (ASTM D3885) 6pp
Specifies a method of test for the determination of resistance of textile fabrics to abrasion using the flexing and abrasion tester. (TX-020)
AS 2001.2.271990 Physical testsDetermination of abrasion resistance of textile fabrics (inflated diaphragm method) (ASTM D3886) 5pp
Specifies a method of determining the resistance to abrasion of textile fabrics using the inflated diaphragm tester. (TX-020)
AS/NZS 2001.4.5:1998 Colourfastness testsDetermination of colourfastness to chlorinated swimming pool water (ISO 105-E03:1994) 3pp
Sets out a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of active chlorine in concentrations such as are used to disinfect swimming pool water (break-point chlorination). This Standard is identical with and has been reproduced from ISO 105-E03:1994. (TX-020)
AS 2001.4.A022005 Colourfastness testsGrey scale for assessing change in colour (ISO 105-A02:1993) 2pp
Adopts ISO105-A02:1993 to provide a method for determining the change in colour for grey scale rating during colourfastness assessment. (TX-020)
AS 2001.2.281992 Physical testsDetermination of abrasion resistance of textile fabrics (rotary platform, double-head method)
AS 2001.4.A032005 Colourfastness testsGrey scale for assessing staining (ISO 105-A03:1993) 2pp
Adopts ISO105-A03:1993 to provide a method for determining the degree of staining of adjacent fabric during colorfastness assessment. (TX-020)
60
AS/NZS 2007.1 Supplement 1:2001 Energy consumption and performance Test materialSpinach 800 gm tin
Comprises one 800 gm tin of spinach for inclusion as a soiling agent required when testing the performance of dishwashers to AS/NZS 2007.1. (EL-015)
AS 2001.4.A052004 Colourfastness testsInstrumental assessment of the change in colour for determination of grey scale rating (ISO 105-A05:1996) 4pp
Specifies an instrumental method for assessing the change in colour of a test specimen in comparison to an identical untreated reference, and the calculations undertaken to convert the instrumental measurements into a grey scale rating. (TX-020)
AS 2001.5.42005 Dimensional changeDomestic washing and drying procedures for textile testing (ISO6330:2000, MOD) 15pp
Specifies domestic washing and drying procedures for textile testing. The procedures are applicable to textile fabrics, garments or other textile articles which are subjected to appropriate combinations of domestic washing and drying procedures. (TX-020)
8pp
AS 2001.4.B012005 Colourfastness testsDetermination of colourfastness to daylight of textile materials (ISO 105-B01:1994, ISO 105-B01:1994/Amd 1:1998) 12pp
Adopts ISO105-B01:1994 to provide a method for the determination of the colour fastness in textile materials to daylight. (TX-020)
AS 2001.5.41987 Dimensional changeDetermination of dimensional change in laundering of textile fabrics and garmentsAutomatic machine method (ISO 6330:1984) 5pp Available Superseded
Sets out methods for determining the dimensional change of textile fabrics and garments during the laundering process using an automatic machine. (TX-020)
Specifies requirements for residual bitumens intended for use in the construction and maintenance of pavements. (CH-025)
AS 2001.4.B022001 Colourfastness testsColourfastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:1994, MOD) 26pp
Specifies a method for determining the resistance of the colour of textiles to the action of an artificial light source which is representative of natural daylight. This method is applicable to white (bleached or optically brightened) textiles. This Standard is an adoption with national modifications of ISO 105-B02:1994 including Amendment 1:1998 and Amendment 2:2000. (TX-020)
AS 2001.5.61987 Dimensional changeDetermination of dimensional change of yarns and sewing threads 2pp
Sets out a method for determining the dimensional change of yarns and sewing threads after immersion in a standard test solution. Two alternative test solution temperatures are given. (TX-020)
AS 2012 AcousticsMeasurement of airborne noise emitted by earth-moving machinery and agricultural tractorsStationary test condition AS 2012.11990 Determination of compliance with limits for exterior noise (ISO 6393:1985) 8pp
Describes a method for determining the exterior noise emitted by earth-moving machinery and agricultural tractors in terms of the A-weighted sound power level while the machine is stationary. (AV-006)
AS 2001.5.71986 Dimensional changeDetermination of dimensional change on dry cleaning in perchloroethylene excluding finishing Machine method (ISO 3175) 3pp
Describes a dry cleaning procedure, using a commercial dry-cleaning machine, for the determination of dimensional change of fabrics and garments after dry cleaning in perchloroethylene. It comprises a process for normal materials and a process for sensitive materials. (TX-020)
4pp
Describes a method for determining the noise emitted by earth-moving machinery and agricultural tractors at the operator's position in terms of the equivalent continuous A-weighted sound pressure level while the machine is stationary. (AV-006)
AS 2001.6.11980 Miscellaneous testsDetermination of the resistance of textiles to certain insect pests (ISO 3998:1977) 8pp
Describes procedures for breeding two insects known to feed on textile materials in Australia and their use in assessing the resistance of wool textiles to their feeding habits. Selection and control of specimens are described as well as the classifying of the degree of resistance of the textile to the insects. (TX-020)
AS 20191986 Fluid powerHydraulic and pneumatic cylindersBore and rod dimensions 4pp
Specifies a range of dimensions for cylinder bores, piston rod diameters, and strokes, and thread details for fluid power cylinders. (ME-035)
AS 2001.5.21995 Dimensional changeDetermination of relaxation and hygral properties of woven fabrics 5pp
Sets out a test procedure for woven fabrics for determining the relaxation shrinkage (i.e. the potential of the fabric to shrink due to stresses incurred during finishing) and hygral change (i.e. the degree to which the fabric will expand and contract in proportion to moisture content). (TX-020)
AS/NZS 2007 Performance of household electrical appliancesDishwashers AS/NZS 2007.1:2005 Methods for measuring performance, energy and water consumption 63pp
Specifies test methods and minimum performance requirements so that the performance of dishwashers intended for household and similar use can be measured, compared and evaluated. (EL-015)
AS 20221983 Anhydrous ammoniaStorage and handling (known as the SAA Anhydrous Ammonia Code) 24pp Available Superseded
Amendment 1 31 January 1985 Sets out requirements for the design, construction and location for installations ranging from bulk depots to points of usage or application. Also deals with safety procedures associated with the operation of an installation, transport and utilization. (ME-032)
61
AS/NZS 2023:1995
AS/NZS 2023:1995 Baths for ablutionary purposes AS/NZS 2032:2006 Installation of PVC pipe systems AS 2047 Windows in buildings AS 2047.11996 Specification for materials and performance 26pp Available Superseded
Specifies the materials and performance requirements for windows, sliding glazed doors, adjustable glass louvres, shopfronts, and window walls with framing elements of one piece, but not curtain walls using stacked or spliced framing systems, manufactured from any materials and installed vertically in external walls of all classes of buildings. Test methods for deflection, operating force, air infiltration, water penetration and ultimate strength are issued separately under the AS 4420 series. (BD-021)
19pp
35pp
Specifies materials, construction and installation requirements for baths manufactured from cast iron vitreous enamel, pressed steel vitreous enamel, vitreous china, stainless steel, plastic and composite materials. (WS-003)
AS 20241991 High voltage a.c. switchgear and controlgear Switch-fuse combinations (IEC 60420 Ed. 2.0 (Bilingual 1990)) 28pp
Specifies requirements for three-pole switch-fuse combinations having rated voltages above 1 kV up to but not including 52 kV for use in three-phase a.c. systems. Covers combinations in which the switch is opened by fuse-striker action with or without the operation of other tripping devices. (EL-007)
Amendment 1 31 October 2008 Proposes methods for handling, storage, installation, testing and commissioning of polyvinyl chloride (PVC) pipelines, above or below ground, for pressure and non-pressure applications conveying liquids. (PL-021)
AS 20381977 Methods for detecting the susceptibility of austenitic stainless steels to intergranular corrosion 8pp
Describes procedures for detecting the susceptibility of austenitic stainless steel to intergranular corrosion in the presence of nitric acid and acidified copper sulphate in contact with copper. It includes details on the selection and preparation of test pieces, the compositions of the test solutions, and the step-by-step procedure for carrying out the test and assessing test results. (MT-008)
14pp
Adopts ISO 21988:2006 to specify the grades of abrasiveresistant white cast irons by chemical composition and hardness. (MT-001)
AS/NZS 2040 Performance of household electrical appliancesClothes washing machines AS/NZS 2040.1:2005 Methods for measuring performance, energy and water consumption 70pp
Amendment 1 30 April 2007 Specifies the method of determining the performance characteristics of electric clothes washing machines intended for household and similar use. This Standard is not intended for the evaluation or comparison of the performance of detergents or other laundry aids. This Standard does not specify safety requirements. (EL-015)
AS 20281977 Methods for the measurement of the depth of hardening in flame and induction hardened steel products (ISO 3754:1976) 12pp
Covers macroscopic, hardness, microhardness and micrographic methods. It describes requirements for the preparation of test pieces and procedures for carrying out the test and preparing a test report. Etchants for outlining micrographic structures are included in an appendix. (MT-001)
10pp
Amendment 1 26 November 2005 Provides manufacturers of roof tiles with design specifications and performance requirements for non-metallic interlocking roof tiles for use in domestic, commercial or light industrial applications. (BD-008)
6pp
AS 2030 The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases AS 2030.11999 Cylinders for compressed gases other than acetylene 28pp
Amendment 1 22 March 2002 Specifies requirements for the usage of cylinders for compressed gases other than acetylene exceeding 0.1 kg, but not exceeding 3000 kg water capacity. This edition deletes any reference to approvals of cylinder design by State and Territorial regulatory authorities and deletes previous references to acceptable other National Standards by expanding the maufacturing requirements. The Standard introduces a design approval scheme referring to third party verification. (ME-002)
AS/NZS 2040.1 Supplement 1:1998 Energy consumption and performance Test materialOther than drum-type detergent (Supplement to AS/NZS 2040.1:1998)
(EL-015)
Specifies requirements for most forms of concrete and terracotta roof tiles. Requirements include dimensional tolerances and transverse strength. Test methods are issued separately as AS 4046. (BD-008)
17pp
AS/NZS 2040.1 Supplement 2:1998 Energy consumption and performance Test materialDrum-type detergent (Supplement to AS/NZS 2040.1:1998)
(EL-015)
Amendment 1 5 December 2005 Sets out requirements for the placement and installing of roof tiles of the types specified in AS 2049. The installing methods described in this Standard apply only to tiled roofs of buildings that are intended for domestic, commercial or light industrial purposes for wind classifications N1-N4 and C1-C3 inclusive. This Standard applies only to roofs with pitches of 15 or greater. (BD-008)
18pp
7pp
Amendment 1 5 May 1999 Amendment 2 15 September 2000 This Standard introduces the concepts of blowdown rack as a safety measure for dealing with leaking or damaged cylinders. It also introduces the concept of a loose identification collar. The collar is to carry the cylinder identification marks and is retained by the cylinder valve. These two new concepts will enhance safety in the use of acetylene gas. (ME-002)
97pp
Amendment 1 5 September 1995 Amendment 2 5 June 1999 Specifies the requirements for the placement and fixing of concrete and terracotta roof tiles to roofs of buildings which are intended for domestic, commercial or light industrial purposes. It only applies to roofs with a pitch of 15 or greater. It also includes diagrams showing the mechanical fixing requirements of ridge tiles in different wind zones. Informative appendices give acceptable nail sizes for batten size relative to rafter spacing for gun and hand nailing. (BD-008)
3pp
Amendment 1 5 May 1999 Specifies requirements for welded cylinders of water capacity not less than 0.1 kg and not greater than 500 kg that are insulated (in particular those manufactured to specification DOT 4L), and intended for storage and transport of fluids. These fluids are generally cryogenic. (ME-002)
Provides manufacturing requirements, design methods and installation requirements for structures assembled from curved corrugated metal sheet or plates. Structures covered include pipes, pipe-arches, arches and special shapes. Design methods are based on ring compression and buckling failure modes. Information is given on durability. Considerations include handling stiffness, fill requirements and compaction. Tables of maximum and minimum cover are given as a guide to structure selection. (CE-025)
AS/NZS 2053 Conduits and fittings for electrical installations AS/NZS 2053.1:2001 General requirements 29pp
Specifies general requirements for both metal and non-metal conduits and fittings to protect cables used in electrical installations. Mechanical properties, electrical characteristics and material requirements are given. Requirements for particular types of conduits and fittings are covered in the other parts of the AS/NZS 2053 series. (EL-004)
AS/NZS 2031:2001 Selection of containers and preservation of water samples for microbiological analysis 3pp
Sets out requirements and recommendations for the selection and preparation of sample containers for the preservation and transport of water and waste water samples for microbiological analyses. (FT-020)
AS/NZS 2053.2:2001 Rigid plain conduits and fittings of insulating material 12pp
Specifies requirements for rigid plain conduits and fittings of insulating material used in electrical installations. To be read in conjunction with AS/NZS 2053.1. (EL-004)
62
44pp
AS/NZS 2053.4:1995 Flexible plain conduits and fittings of insulating material (IEC 60614-2-5 Ed. 1.0 (Bilingual 1992)) 7pp
To be read in conjunction with AS/NZS 2053.1. Specifies requirements for non-threadable flexible plain conduits and their fittings, which are made of insulating material and are used for the protection of cables in an electrical installation. (EL-004)
Specifies requirements for carbon, low alloy and high alloy cast steels. (MT-001)
AS 20751991 Glossary of terms and notations for gears (ISO 1122.1:1983) 47pp
Defines over 300 geometric and kinematic terms for gears and includes more than 150 diagrams. Applicable to cylindrical, bevel, hypoid gears and gear pairs. It is based on ISO 1122.1, with modifications and additions; it also provides gear notation symbols reproduced from ISO 701. An alphabetical index is included. (ME-011)
11pp
Specifies requirements for devices intended for use in a.c. power supply sytems for providing earth-fault current limitations. Test methods are included. (EL-023)
AS 20832005 Calibration blocks and their methods of use in ultrasonic testing 41pp
Specifies requirements for a range of calibration blocks and their methods of use in ultrasonic testing. (MT-007)
AS/NZS 2053.6:2001 Profile-wall, smooth-bore conduits and fittings of insulating material 6pp
Specifies requirements for rigid, non-threadable, profile-wall, smooth-bore conduits and fittings of insulating materials used in electrical installations. To be read in conjunction with AS/NZS 2053.1. (EL-004)
26pp
Specifies the requirements and includes methods of tests for flat and curved toughened and laminated safety glazing for windscreens and other glazing for land vehicles. (ME-055)
11pp
Specifies requirements for threadable and nonthreadable plain rigid metal conduits and fittings in sizes 20 to 50 mm OD. To be read in conjunction with AS/NZS 2053.1. (EL-004)
AS/NZS 2080:1995 Safety glass for land vehicles (BS 857, EC 43) Available Superseded
33pp
AS/NZS 2053.8:1995 Flexible conduits and fittings of metal or composite material (IEC 60614-2-5 Ed. 1.0 (Bilingual 1992)) 8pp
To be read in conjunction with AS/NZS 2053.1. Specifies requirements for non-threadable, flexible conduits and their fittings of metal or composite construction and which are used for the protection of cables in an electrical installation. (EL-004)
Amendment 1 5 July 1996 Specifies requirements and tests for flat and curved heattreated (toughened or tempered) and laminated safety glass for road vehicles, railway locomotives, rolling stock and other railway vehicles. Provision is made for standard laminates for other than windscreens, and for high performance laminates meeting the optical requirements specified for heat-treated safety glass suitable for windscreens. A general section covers the optical, quality and dimensional requirements of both heat-treated and laminated glass, and separate sections state the specific requirements for each type. Tests are prescribed for uniformity and fragmentation of heat-treated glass, and for light stability, fracture and adhesion, boiling water and impact resistance (high performance laminates) of laminated glass. A luminous transmittance of not less than 75% is recommended for windscreens and 70 for safety glass other than windscreens. Obscuration bands and special application are considered separately. (ME-055)
AS 20871977 Methods for the macroscopic assessment of the non-metallic inclusion content in wrought steel 8pp
Describes three procedures for macroscopic assessmentthe oxidation-fracture, step-machined and magnetic particle methods. The field of application is given for each test together with procedures for preparing test pieces, performing the test, and the reporting of the test results. (MT-008)
32pp
AS/NZS 2081 Electrical equipment for coal and shale minesElectrical protection devices AS/NZS 2081.1:2002 General requirements 9pp
Specifies requirements for general purpose sheave blocks for lifting purposes. Guidance on information that should be supplied with enquiries and orders, on care and use and on use for non-lifting applications, is given in appendices. (ME-025)
AS 20922004 Pyrotechnic marine distress flares and signals for pleasure craft 8pp
Specifies performance requirements and some constructional requirements for distress rockets, flares and signals, smoke signals and collision warning flares intended for use on board pleasure craft. Recommendations regarding the circumstances under which each type of flare or signal should be used are included in an appendix. (CS-080)
AS 20621997 Non-destructive testingPenetrant testing of products and components (ASTM E1417) 22pp
Specifies requirements and test procedures for visible dye and fluorescent penetrant testing of non-porous products and components for the detection of discontinuities that are open to the surface. Process control procedures and requirements for standard test panels are specified in appendices. (MT-007)
Specifies performance requirements for specific electrical protection devices for use in coal and shale mines. It includes information on the general requirements for earth-continuity monitoring, earth-leakage protection, lockout earth-fault protection and earthfault current limiting devices. (EL-023)
10pp
Specifies construction and performance requirements for lightweight protective helmets intended to mitigate the adverse effects of a blow to the head. (CS-014)
AS/NZS 2081.3:2002 Earth-leakage protection systems for use on earth-fault current limited systems (IT systems) 15pp
Specifies requirements for earth-leakage protection devices used on a a.c. power supply systems having an earth-fault current limitation system (IT system). Test methods are included. (EL-023)
4pp
Sets out materials and procedures to be used during the various stages of production of plastics materials, coating and printing of plastics items for food contact and subse-
63
AS/NZS 2097:2006
AS/NZS 2097:2006 Methods for sampling veneer and plywood 3pp
Provides procedures for sampling veneer and plywood for determination of physical and mechanical properties of mill runs, specially produced veneers and plywoods, and consignments. (TM-008)
AS 2106.62005 Determination of flash pointClosed cup equilibrium method (ISO 1523:2002) 11pp
Adopts ISO1523:2003 to specify a closed cup equilibrium method for the determination of the flash point of flammable and combustible liquids, over a temperature range of (30C to 110C). (CH-009)
AS/NZS 2098 Methods of test for veneer and plywood AS/NZS 2098.0:2006 General introduction and list of methods 1p
(TM-008)
AS/NZS 2107:2000 AcousticsRecommended design sound levels and reverberation times for building interiors 15pp
Recommends design sound levels and reverberation times for different areas of occupancy in various categories of buildings. Specifies methods of measuring the ambient sound level reverberation time. This Standard is intended for use in assessing the acoustic performance of buildings and building services. It does not apply to the evaluation of occupancy noise. (AV-004)
AS 21031978 Dial gauges and dial test indicators (metric series) 28pp
Specifies dial gauges and dial test indicators used for linear measurement, reading to 0.01 mm and 0.002 mm, and gives requirements for materials, properties, basic design details, accuracy and finish. Appendices describe methods of test for the more important features of the instruments, and give notes on their care and use. Information is also given for calibration requirements for long travel dial gauges. For dial gauges, the Standard is in technical agreement with ISO/R463, but the accuracy and performance requirements have been amplified to show repeatability and discrimination as two separate metrological properties. For dial test indicators the technical requirements are in complete agreement with current ISO/TC3 work. (ME-027)
AS 21071987 AcousticsRecommended design sound levels and reverberation times for building interiors 10pp Available Superseded
Provides design criteria for conditions affecting the acoustic environment within occupied spaces. The ambient sound levels take into account the function of the area(s) and apply to the sound level measured with the space unoccupied but ready for occupancy. (AV-004)
AS/NZS 2098.3:2006 Bond quality and strength of scarf joints in plywood 4pp
Sets out the methods for determining the quality and relative bond strength of scarf joints in plywood. (TM-008)
AS 2106 Methods for the determination of the flash point of flammable liquids (closed cup) AS 2106.02005 General 3pp
AS 21082004 Engine coolants Type A and Type B for engine cooling systems 12pp
Provides specifications for formulated glycol coolant solutions and for corrosion inhibitors. Applies both to concentrates which require dilution before use and to solutions which are formulated for direct use in passenger car and light commercial engine cooling systems. (CH-029)
AS/NZS 2098.4:2006 Measurement of dimensions and shape for sheets of veneer and plywood 4pp
Sets out the methods for determining the thickness, length, width, squareness, edge straightness and flatness of veneer and plywood sheets. (TM-008)
Sets out general principles for determining the closed cup flash point of flammable and combustible liquids. Provides a list of test methods for the determination of closed cup flash point based on that given in the UN Recommendations on the Transport of Dangerous GoodsManual of Tests and Criteria. (CH-009)
AS/NZS 2111 Textile floor coveringsTests and measurements AS/NZS 2111.0:1996 Introduction and list of methods
Amendment 1 5 August 1997 (TX-009)
18pp
1p
Specifies the Abel closed cup method for determining the flash point of flammable and combustible liquids with flash points between -30C and 70C. This Standard is identical with and has been reproduced from ISO 13736:1997. (CH-009)
AS 2106.22005 Determination of flash pointPenskyMartens closed cup method (ISO 2719:2002) 21pp
Adopts ISO2719:2002 to specify methods for determining the flash point of flammable and combustible liquids with flash points above 40C, using the PenskyMartens closed-cup tester. (CH-009)
AS/NZS 2111.1:1996 Machine-made textile floor coverings Determination of total thickness (ISO 1765:1986) 3pp
Specifies a basic method for the determination of the thickness of machine-made textile floor coverings. (TX-009)
4pp
Sets out two methods for determining the density of veneer and plywood, as follows:Method 1 a direct measurement.Method 2 a method intended for comparative purposes. (TM-008)
AS/NZS 2098.8:2006 Water absorption and thickness swelling of unpainted plywood 5pp
Sets out the method for determining the water absorption, through the face and edge, of unpainted plywood, and the hygroscopic swelling resulting from the uptake of water. (TM-008)
AS 2106.32005 Determination of flash/no flashRapid equilibrium closed cup method (ISO 3680:2004) 18pp
Adopts ISO3680:2004 to specify a rapid closed cup equilibrium method for carrying out a flash/no flash test for flammable and combustible liquids at selected test temperatures within the range of (30C to 300C). (CH-009)
AS/NZS 2111.2:1996 Determination of thickness loss under dynamic loading (ISO 2094:1986) 5pp
Specifies a method for the determination of the thickness loss of textile floor coverings under dynamic loading. (TX-009)
3pp
Describes the procedure for determining the mass per unit area of a textile floor covering in its entirety. (TX-009)
AS 2106.42005 Determination of flash pointRapid equilibrium closed cup method (ISO 3679:2004) 18pp
Adopts ISO3679:2004 to specify a rapid equilibrium method for the determination of the closed cup flash point of flammable and combustible liquids within the temperature range of (30C to 300C). (CH-009)
AS/NZS 2111.4:1996 Determination of surface pile mass above the substrate 7pp
Describes the procedure for determining the mass per unit area of surface pile, which can be cut from above the substrate of a textile floor covering. (TX-009)
AS 2106.52005 Determination of flash/no flashClosed cup equilibrium method (ISO 1516:2002) 9pp
Adopts ISO1516:2002 to specify a closed cup equilibrium method for carrying out a flash/no flash test for flammable liquids, over the temperature range (30C to 110C). (CH-009)
AS/NZS 2111.5:1996 Determination of thickness of pile above the substrate (ISO 1766:1986) 3pp
Specifies a method for the determination of the thickness of pile above the substrate of a textile floor covering. (TX-009)
3pp
Describes the procedure for determining the average tuft length of the pile of a textile floor covering. (TX-009)
64
30pp
2pp
Describes two procedures for determining the loop length of the pile yarn in textile floor coverings. (TX-009)
AS/NZS 2111.9:1996 Determination of the number of tufts per unit length and per unit area (ISO 1763:1986) 3pp
Specifies a method for the determination of the number of tufts and/or loops per unit length and per unit area of a carpet, and is applicable to carpets the pile of which consists of uniformly spaced tufts and/or loops. (TX-009)
AS/NZS 2111.21:1996 Non-destructive measurements of pile thickness above the backingWRONZ gauge method 7pp
Specifies a method for the measurement of the thickness of pile above the backing of a textile floor covering and is applicable to all textile floor coverings having a pile of cut or looped yarn. (TX-009)
AS 2118.31997 Deluge
18pp
Sets out requirements for the operation of specialized sprinkler installations designed to function in hazardous environments such as flammable liquid stores where open sprinklers deliver water or foam rapidly when quick opening valves operate following detection of flame, heat or smoke. (FP-004)
AS 2118.41995 Residential
13pp
AS/NZS 2111.11:1996 Determination of total pile mass per unit area by complete dissection 8pp
Describes the procedure for determining total pile mass per unit area by complete dissection of textile floor coverings. (TX-009)
AS/NZS 2111.13:1996 Determination of thickness loss after brief, moderate static loading (ISO 3415:1986) 4pp
Specifies a method for the determination of thickness loss of textile floor coverings after brief, moderate static loading, and is intended to simulate the effect of the pressure exerted by a chair leg for a short period. (TX-009)
Sets out a range of characteristics and related methods of test of oil of eucalyptus produced in Australia containing 70 to 75% cineole. It also incorporates the analytical data produced by gas chromatographic procedure. Specifications of flash point determination are included in an appendix. (CH-021)
3pp
Specifies the design, installation and commissioning of sprinklers for life safety and property protection for the inhabitants of low-rise Class 2 and Class 3 buildings as defined in the BCA. In addition to providing an increased level of protection to building occupants, this Standard also considers the economic aspects of the sprinkler system. The purpose of this Standard is to provide design and installation requirements for a life safety sprinkler system in addition to smoke alarms, to aid in the detection and control of fires in residential occupancies and thus provide improved protection against injury and loss of life. A sprinkler system designed and installed in accordance with this Standard is expected to prevent flashover (total involvement) in the room of fire origin and to improve the chance for occupants to escape or be evacuated. (FP-004)
AS/NZS 2111.14:1996 Determination of thickness loss after prolonged, heavy static loading (ISO 3416:1986) 4pp
Specifies a method for determination of thickness loss of textile floor coverings after prolonged, heavy static loading. (TX-009)
Sets out a range of characteristics and related methods of test of oil of eucalyptus produced in Australia containing 80 to 85% cineole. It also incorporates the analytical data produced by gas chromatographic procedure. Specifications of flash point determination are included in an appendix. (CH-021)
70pp
Specifies requirements for the design, installation, commissioning and maintenance of automatic fire sprinkler systems for one and two family homes. (FP-004)
16pp
Specifies requirements for the design and installation of automatic life safety fire sprinkler systems for buildings defined as Class 1 in accordance with the Building Code of Australia. (FP-004)
20pp
5pp
AS/NZS 2111.17:1996 Determination of thickness, compression and recovery characteristics (BS 4098:1975) 6pp
Describes a method for measuring the thickness, compression and recovery characteristics of textile floor coverings. (TX-009)
Specifies certain characteristics of the essential oil of Eucalyptus citriodora Hook, in order to facilitate assessment of its quality. This Standard is identical with and has been reproduced from ISO 3044:1997. (CH-021)
Specifies minimum requirements for the installation, commissioning and testing of combined sprinkler and hydrant systems for installation in multi-storey buildings as an alternative to the installation of separate sprinkler and hydrant systems. (FP-004)
AS 21171991 Hose and hose assemblies for petroleum and petroleum productsMarine suction and discharge (ISO 1823:1975) 10pp
Specifies requirements for hose and hose assemblies for conveying petroleum and petroleum products at product temperatures up to 70C and in ambient temperatures ranging from -20C to 65C, but does not include requirements for off-shore mooring use. Appendices include a method for the determination of resistance of hose to hydrostatic pressure and a test for flexibility of hose. A guide to testing hose assemblies for in-service performance is also given. (RU-001)
5pp
Sets out requirements covering minor modifications to existing sprinkler systems of light or ordinary hazard classification, such as the removal, alteration or addition of sprinklers, or the modification or addition of ranges and distribution pipes of limited size. (FP-004)
AS/NZS 2111.18:1997 Burning behaviourTablet test at ambient temperature (ISO 6925:1982) 3pp
Specifies a method for the assessment of the burning behaviour often superficial of textile floor coverings in a horizontal position when exposed to a small source of ignition under controlled laboratory conditions. (CS-086)
20pp
Specifies the requirements for the support and installation for piping used in fire sprinkler systems. (FP-004)
13pp
AS 2118 Automatic fire sprinkler systems AS 2118.12006 General systems AS 2118.11999 General requirements 390pp
(FP-004)
4pp
Specifies requirements for the information to be provided for the approval of fire sprinkler systems in accordance with AS 2118.1 and wall wetting sprinkler systems in accordance with AS 2118.2. (FP-004)
Sets out a method for determining the colourfastness of textile floor coverings and pile yarns to dry and wet rubbing. (TX-009)
158pp
AS/NZS 2119:1997 Textile floor coveringsMachine-made Sampling and cutting specimens for physical tests (ISO 1957:1986) 2pp
Specifies sampling procedures to be used when testing carpets and other types of textile floor coverings. It is identical with and reproduced from ISO 1957:1986. (TX-009)
Amendment 1 30 June 2000 Specifies the general requirements for the design, installation and commissioning of automatic fire sprinkler systems in buildings. (FP-004)
AS/NZS 2111.20:1996 Rectangular textile floor coverings Determination of dimensions (ISO 3018:1974)
150pp
AS 2120 Medical suction equipment AS 2120.11992 Electrically-powered suction equipment Safety requirements (ISO 10079-1:1991) 22pp
Specifies minimum safety and performance requirements for mains electricity and battery powered trans-
2pp
Specifies the requirements for the design, installation and commissioning of standard fire sprinkler systems in buildings. (FP-004)
Specifies a method for determining the dimensions of rectangular textile floor coverings, both hand-made
65
AS 2120.21992
portable medical and surgical suction equipment in health care facilities, such as hospitals, for domiciliary care of patients and for field and transport use. Requirements supplement or modify the corresponding clauses in AS 3200.1.01990/NZS 6150. This Standard is technically equivalent to and has been reproduced from ISO 10079-1:1991. (HE-017)
58pp
Amendment 1 11 October 2000 Comprises a single set of general conditions of contract suitable for a wide variety of civil engineering, building, electrical and mechanical engineering and other types of engineering and construction contracts. This contract has a companion document AS 2545, specially prepared for subcontract use. AS 2125 includes appropriate conditions of tendering and a form of tender. AS 2127 comprises a form of formal instrument of agreement. AS 2124/A, AS 2124/B, AS 2125 and AS 2127 are also available separately as pads of forms.
AS 2134 Recommended practice for chemical analysis by atomic absorption spectrometry AS 2134.11999 Flame atomic absorption spectrometry 25pp
Sets out recommended practices for the operation of flame atomic absorption spectrometers used in chemical analysis. This Standard includes a description of instrumentation, optimization procedures, calibration, test procedures, information on factors affecting atomic absorption and a section on analytical quality assurance. (CH-016)
27pp
AS 2120.31992 Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1992) 15pp
Specifies safety and performance requirements for medical suction equipment powered from a vacuum or pressure source. In particular, it applies to connections to the terminal unit of vacuum systems. Requirements supplement or modify the corresponding clauses in ISO 10079-3, Medical suction equipment, Part 3: Suction equipment powered from a vacuum or pressure source. This Standard is technically equivalent to and has been reproduced from ISO 10079-3:1992. (HE-017)
Sets out recommended practices for the operation of graphite furnace absorption spectrometers used in chemical analysis. The Standard includes a description of instrumentation, optimization procedures, calibration, test procedures and information on factors affecting atomic absorption. A section on analytical quality assurance has been added to the Standard. (CH-016)
39pp
Amendment 1 11 October 2000 Comprises a single set of general conditions of contract suitable for a wide variety of civil engineering, building, electrical and mechanical engineering and other types of engineering and construction contracts. AS 25451986, Subcontract conditions, has been specially prepared so as to be compatible with this document. AS 2124/A and AS 2124/B, are also available separately as pads of forms.
AS 2122 Combustion characteristics of plastics AS 2122.11993 Determination of flame propagation Surface ignition of vertically oriented specimens of cellular plastics (ISO 1210:1992, ISO 3582:1978) 17pp
Specifies a procedure for determining the flame duration and material consumed when small vertically oriented specimens of cellular plastics are exposed to a small flame. (FP-018)
AS 21361977 Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (ISO 196:1978) 8pp
Specifies requirements for the testing reagent and describes two methods of preparation of the reagent. Preparation of test pieces, procedures for carrying out the test and details for the preparation of a test report are given. (MT-008)
AS/NZS 2122.2:1999 Determination of minimum oxygen concentration for flame propagation following top surface ignition of vertically orientated specimens 15pp
Sets out a method for the determination of minimum oxygen concentration in an upward flowing mixture of oxygen and nitrogen that will just support flame propagation. The method is applicable to physically self-supporting plastics, cellular plastics (flexible or rigid), and film or thin sheet. A statistical method is used in the determination of the end point. (FP-018)
AS Doc 2124N1992 Notes on the changes in the General conditions of contract 4th edition (AS 21241992) as compared with the 3rd edition (AS 2124 1986) 16pp
Indicates the changes of importance that have been made in the 1992 edition of the General conditions of contract as compared with the 1986 edition. The purpose of each of the changes is given. This document is not intended to take the place of a complete review of the 1992 edition. Published in conjunction with the Construction Industry Engineering Services Group. (MB-010)
12pp
Specifies the photometric and colorimetric and physical requirements for red, yellow, and white bicycle reflectors and yellow pedal reflectors, and includes relevant tests. (CS-010)
47pp
Specifies requirements and dimensions for circular, plate blank, boss, integrally cast or forged and welding-neck type flanges or nominal sizes DN 15 to DN 3000 and their bolting for use on pipes, valves and fittings and other pressureretaining equipment containing fluid at pressures up to 19300 kPa and at temperatures in the range -200C to +525C. Flanges in carbon steel, carbon-manganese steel, low-alloy steel, stainless steel, grey iron, malleable iron, ductile cast iron or copper alloy, together with relevant material specifications are included. This Standard is applicable to flanges for water, steam, compressed air, chemical and petroleum plants, hydraulic piping and where other Standards require compliance with this Standard. Recommendations on the selection of bolting and method of making flanged joints are included. This Standard is not intended to apply to flanges for water or waste water covered by AS 4087. (ME-001)
AS 21431978 Industrial and commercial steel shelving (BS 826) 16pp Obsolescent
Covers design and manufacture, and installation of shelving in the form of bays, stacks and multi-tier units. Dimensions and tolerances are given and materials for the shelving and for components are specified. Finish, marking and labelling are also covered. (BD-062)
65pp
Specifies photometric and physical requirements for the design, construction and performance of traffic signal lanterns intended to control the movement of vehicles, including bicycles, and pedestrians. The scope includes lanterns using either incandescent lamps or light emitting diodes (LEDs) as the light source and covers both general purpose and extended range vehicular lanterns. (LG-006)
120pp
(MB-010)
AS/NZS 2130:1998 Cots for day nursery, hospital and institutional useSafety requirements (BS 1694:1990) 28pp
Amendment 1 5 August 1998 Specifies requirements for cots for day nursery, hospital and institutional use. These requirements include material, design, construction, performance, labelling and marking, all relating to safety of the child within the cot. The Standard applies to cots constructed of metal or plastic, but not timber cots due to the nature of the intended environment and the need for ease of cleaning. The Standard does not specify requirements for folding cots. (CS-003)
AS 21452002 Stainless steel needle tubing for manufacture of medical devices (ISO 9626:1991) 9pp
Specifies the dimensions, surface and mechanical properties of normal- and thin-walled tubing of designated metric sizes 3.4 mm to 0.3 mm, and of extra-thin-walled tubing of designated metric sizes 2.1 mm to 0.6 mm, and is applicable to rigid stainless steel needle tubing suitable for use in the manufacture of hypodermic needles and other medical devices primarily for human use. Does not apply to flexible stainless steel needle tubing. This Standard is identical and has been reproduced from ISO 9626:1991. (HE-009)
200pp
(MB-010)
66
AS/NZS 2153.9:1997 Equipment for sowing, planting and distributing fertilizers (ISO 4254-9:1992) 4pp
Specifies technical means of improving the level of personal safety of operators and others involved during normal operation and maintenance of equipment for sowing, planting and distributing fertilizers. Additional to the requirements of AS/NZS 2153.1. This Standard is identical with and has been reproduced from ISO 4254-9:1992. (ME-065)
25pp
39pp
Provides requirements for the materials, design and construction of leads acid, automotive batteries having either a 6 V or a 12 V output. It covers both safety and performance criteria. (EL-005)
Adopts EN 420:2003 to specify the general requirements for glove construction, high visibility, innocuousness, cleaning, comfort and efficiency, marking and information applicable to occupational protective gloves. The Standard is also applicable to gloves permanently incorporated in containment enclosures. (SF-023)
Provides managing authorities with guidance for walking track classification and signage in order to provide consistency of information to users of walking tracks. This is intended to minimise risk, preserve natural features and enhance recreation opportunities associated with the use of walking tracks. (CS-029)
18pp
AS/NZS 2161.4:1999 Protection against thermal risks (heat and fire) (EN 407:1994) 4pp
Specifies requirements for gloves for protection against heat and flames in one or more of the following forms: fire, contact heat, convective heat, radiant heat, small splashes or large quantities of molten metal. This Standard is identical with and has been reproduced from EN 407:1994. (SF-023)
AS/NZS 2153 Tractors and machinery for agriculture and forestryTechnical means for ensuring safety AS/NZS 2153.1:1997 General (ISO 4254-1:1989)
Specifies design methods and loads for use in the structural design of walking tracks. It covers boardwalks, galleries, pedestrian bridges (including wire crossings), platforms (for viewing), ladders, stairways, stiles and barriers. (CS-029)
10pp
9pp
Specifies requirements for the design of tractors and machinery for agriculture and forestry regarding the prevention of accidents arising from the use of such tractors and machinery. Also provides the technical means for improving the level of personal safety for operators and users of tractors and machinery for agriculture and forestry. This Standard is identical with and has been reproduced from ISO 4254-1:1989. (ME-065)
Specifies requirements for medium-curing cutback bitumen for roadmaking purposes. (CH-025)
5pp
56pp
Amendment 1 5 April 1996 Specifies minimum requirements for the design, calculation and testing of piled foundations for civil engineering and building structures, on land and immediate inshore locations. (CE-018)
Specifies the performance requirements and test methods for gloves which are intended to protect against convective or conductive cold down to temperatures of 50C. This could be linked to either the climatic conditions or occupational activity concerned. This Standard is technically equivalent to and reproduced from EN 511:1994. (SF-023)
5pp
Specifies requirements regarding the prevention of accidents arising from the use of tractors by indicating the appropriate parameters to be met when designing tractors. Additional to the requirements of AS/NZS 2153.1. This Standard is identical with and has been reproduced from ISO 4254-3:1992. (ME-065)
AS 2161.62003 Protective gloves for firefighters Laboratory test methods and performance requirements (ISO 15383:2001) 22pp
Specifies test methods for protective gloves for firefighters. This Australian Standard is identical with and reproduced from ISO 15383. (SF-049)
AS 2160 Contract for the supply and construction of a swimming pool or spa AS 2160.11998 Concrete swimming pool or spa (no carbon copy) 36pp
This Standard sets out a Contract for the supply and installation of a concrete swimming pool or spa. It is intended for use in relation to swimming pools or spas constructed or installed wholly or partially in the ground as a permanent concrete structure. It also includes notes for the guidance of the users of the Contract. (CS-063)
3pp
AS/NZS 2161.7.1:1998 Protection against cuts and stabs by hand knivesChainmail gloves and arm guards (BS EN 1082-1:1997) 27pp
Specifies requirements for the design, penetration resistance, ergonomic characteristics, weight, material, marking and instructions for use of gloves and arm guards. This Standard is identical with and has been reproduced from BS EN 1082-1:1997. (SF-023)
Specifies safety requirements for winches used on forestry machinery and agricultural machinery used in forests. Additional to the requirements of AS/NZS 2153.1. This Standard is identical with and has been reproduced from ISO 4254-4:1990. (ME-065)
AS 2160.11998 (Reusable PDF) Concrete swimming pool or spa (no carbon copy) 36pp
This Standard sets out a Contract for the supply and installation of a concrete swimming pool or spa. It is intended for use in relation to swimming pools or spas constructed or installed wholly or partially in the ground as a permanent concrete structure. It also includes notes for the guidance of the users of the Contract.
AS/NZS 2161.7.2:2005 Protection against cuts and stabs by hand knivesGloves and arm guards made of material other than chainmail (ISO 13999-2:2003) 16pp
Adopts ISO 13999-2:2003 to specify requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut resistant gloves, arm guards and protective sleeves made of materials other than chainmail and rigid metal and plastics. (SF-023)
4pp
Specifies the special requirements to be considered when designing power-assisted sprayers for cropprotection and liquid fertilizer application which are mounted, trailed or self-propelled. It is additional to the general requirements of AS/NZS 2153.1. This Standard is based on and reproduced from ISO 42546:1995. (ME-065)
AS/NZS 2161.7.3:2005 Protection against cuts and stabs by hand knivesImpact cut test for fabric, leather and other materials (ISO 13999-3:2002) 14pp
Adopts ISO 13999-3:2002 to specify an impact cut test for use on fabric, leather and other materials used in protective clothing materials, gloves and arm guards. (SF-023)
AS/NZS 2153.7:1997 Combine harvesters, forage and cotton harvesters (ISO 4254-7:1995) 7pp
Specifies requirements for the prevention of accidents arising from the use of combine harvesters and selfpropelled forage and cotton harvesters. Additional to the requirements of AS/NZS 2153.1. This Standard is
AS/NZS 2161 Set:2008 Occupational protective gloves Set AS/NZS 2161 Occupational protective gloves AS/NZS 2161.1:2000 Selection, use and maintenance
306pp
AS/NZS 2161.8:2002 Protection against ionizing radiation and radioactive contamination (EN 421:1994) 8pp 9pp
Specifies requirements for protective gloves against ionizing radiation and radioactive contamination. This
Sets out guidance on the selection, use and maintenance of various types of gloves, especially those
67
AS/NZS 2161.9:2002
Standard is identical with and has been reproduced from EN 421:1994. (SF-023)
AS/NZS 2161.9:2002 Method of measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:1996) 17pp
Specifies test methods and evaluation criteria for the vibration transmissibility of gloves at the palm of the hand. This joint Standard is identical with and reproduced from ISO 10819:1996. (SF-023)
9pp
Specifies requirements for burettes suitable for general laboratory use. (CH-001)
AS/NZS 2179.1:1994 Metal shape or sheet rainwater goods, and metal accessories and fasteners 22pp
Specifies both performance and prescriptive requirements for a limited range of nominal sizes for metal shape or sheet rainwater goods, and metal accessories and fasteners made of aluminium alloys, aluminium/zinc alloy-coated steel, copper and copper alloys, zinc-coated steel, stainless steel and zinc. The Appendices include purchasing guidelines and test methods for demonstrating compliance with the performance requirements. (WS-020)
AS/NZS 2161.10.1:2005 Protective gloves against chemicals and micro-organismsTerminology and performance requirements (BS EN 374-1:2003) 7pp
Adopts EN 374-1:2003 to specify terminology and performance requirements for penetration and permeation testing of gloves intended for use against chemicals and biologically hazardous materials. (SF-023)
AS 21672005 Graduated straight pipettes (ISO 835-1:1981, ISO 835-2:1981, ISO 8353:1981) 15pp
Sets out a series of graduated straight pipettes suitable for general laboratory purposes. (CH-001)
AS 21821998 SterilizersSteamBenchtop
22pp
AS/NZS 2161.10.2:2005 Protective gloves against chemicals and micro-organismsDetermination of resistance to penetration (BS EN 374-2:2003) 5pp
Adopts EN 374-2:2003 to specify the method for the determination of the resistance of protective gloves to penetration. The primary test is an air leak test, and gloves meeting this Standard are considered to be suitable for use against biologically hazardous material. (SF-023)
Specifies requirements for benchtop electrically heated sterilizers that generate saturated steam within the unit at selected temperatures up to and including 136C. These sterilizers are intended for use in health care facilities, generally for the sterilization of instruments and utensils (wrapped and unwrapped). They are not suitable for the sterilization of fluids, unless the sterilizer also complies with the relevant requirements of AS 2192 for the sterilization of fluids. Guidance on information that should be supplied with enquiries and orders is given in an appendix. (ME-003)
AS/NZS 2161.10.3:2005 Protective gloves against chemicals and micro-organismsDetermination of resistance to permeation by chemicals (BS EN 374-3:2003) 8pp
Adopts EN 374-3:2003 to specify the method for the determination of resistance of protective glove materials to permeation by potentially hazardous nongaseous chemicals under conditions of continuous contact. (SF-023)
AS/NZS 2172:1995 Cots for household useSafety requirements 20pp Available Superseded
Specifies material, constructional and design requirements for cots as well as performance criteria, labelling and marking, all of which are related to the child's safety while in the cot. It does not include carry cots or folding cots. (CS-003)
AS 21841985 Low voltage switchgear and controlgear Moulded-case circuit-breakers for rated voltages up to and including 600 V a.c. and 250 V d.c. 21pp
Deals with characteristics, design and construction, type and routine tests of single-pole and multi-pole mouldedcase circuit-breakers, including those which incorporate replaceable current-limiting fuses, for interrupting ratings of 10 kA and above. It may also be used to verify the breaking capacity of moulded-case circuit-breakers within interrupting ratings of 3 kA to 10 kA, which otherwise fall within the scope of AS 3111. Additional requirements may apply to miniature overcurrent circuit-breakers in approvals regulations. (EL-006)
AS 2174 Heavy road vehiclesMechanical coupling between prime movers and semitrailers Interchangeability requirements AS 2174.12006 Non-dedicated vehicle combinations 11pp
Specifies the requirements for interchangeability of non-dedicated combination vehicles for coupling of prime movers, converter, dollies and semitrailers to provide compatibility and adequate clearances in normal use on both sealed and unsealed roads. (ME-053)
AS 2162 Verification and use of volumetric apparatus AS 2162.11996 GeneralVolumetric glassware 26pp
Specifies procedures for the verification of volumetric glassware, using water or mercury as the working substance, and gives recommended practices for the use of such glassware. Factors affecting accuracy are dealt with in some detail; e.g. temperature in respect of both the vessel and the liquid, the cleanness of glass surfaces, the reading of volumes and, for vessels calibrated to deliver, delivery time. Specific attention is given to the correct use of volumetric flasks, pipettes and burettes. Appendices detail methods for cleaning volumetric glassware, a leakage test for burette stopcocks, recommended stopcock lubricants, correction tables for use in calibration, and a list of reference literature, including relevant Australian and British Standards. (CH-001)
Provides definitions for terms referred to in the AS 2187, Explosives series of Standards and those terms commonly used in the explosive and pyrotechnic industries. (CE-005)
AS 2187.11998 Storage
64pp
8pp
Specifies the requirements for the location of fifth wheels and kingpins on vehicles used in dedicated combinations operating normally on both sealed and unsealed roads. (ME-053)
Amendment 1 1 January 2000 Specifies requirements for the storage of explosives including pyrotechnics as defined in AS 2187.0, and for the location, design, construction and maintenance of magazines. It applies to portable magazines, relocatable magazines, fixed or permanent magazines, bulk storage and underground storage. It does not apply to the storage of explosives and explosive ordnance for defence purposes which comply with the Defence Explosives Manual. (CE-005)
6pp
Amendment 1 5 January 1995 Defines requirements for interchangeability, compatibility, and adequate clearances, for coupling prime movers, semitrailers, and in the case of a B-double, the leading semitrailer and the second semitrailer. (ME-053)
120pp
Specifies requirements for the safe use of explosives including the mixing, testing, initiation and firing of charges. The Standard also provides information on misfires as well as considerations such as ground vibration and airblast. Special topics including blasting in hot material, blasting under water and demolition by blasting are also included. (CE-005)
68
20pp
3pp
Specifies the requirements and precautions to be carried out, within a display site, for the storage, conveyance, handling and use of pyrotechnics for outdoor displays, and for conducting such displays. It does not apply to pyrotechnics for indoor theatrical and film sets, for marine distress signals, classified and shopgoods fireworks or for model rocket mortars. (CE-005)
Sets out a method for fillet break testing of a welded joint. The test aids in revealing the presence of imperfections, such as slag inclusions, lack of fusion and porosity in a fillet weld. (WD-006)
5pp
Sets out a method for macro testing of a welded joint. The test reveals the weld shape, the extent of penetration and the soundness of the welded joint. (WD-006)
5pp
Sets out a method for hardness testing of a welded joint. The test measures the hardness of the weld metal, the heat affected zone (HAZ) and the parent metal on prescribed traverses located in the regions of expected maximum and minimum hardness. (WD-006)
21pp
Specifies the general requirements for alarm transmission systems, equipment and systems using dedicated paths, switched networks, digital networks and wirefree systems. (EL-031)
43pp
Amendment 1 8 August 2006 Specifies requirements for the static calibration of forcemeasuring instruments and their classification as working force standards. (MT-006)
AS 2205 Methods for destructive testing of welds in metal AS 2205.12003 General requirements for tests 4pp
AS 2205.7.22003 Dropweight fracture toughness test for nil-ductility transition temperature 3pp
Sets out a method for dropweight testing of a welded joint to determine the nil-ductility transition temperature of a selected area of metal in the weld zone. (WD-006)
35pp
Specifies functional, durability, stability and performance criteria related to child safety for folding portable cots constructed of metal, plastic, fabric (mesh) or timber. It is applicable to cots which can be readily dismantled or folded for transportation and are intended to be used as a temporary facility for children. It is not applicable to cots intended for permanent household use nor to cradles. (CS-003)
Sets out general requirements for test methods for the destructive testing of welded or brazed joints, such test methods being intended for use unless other procedures are specified by the relevant application Standard. (WD-006)
AS 2205.7.32003 Fracture mechanics toughness tests (Klc, critical CTOD and critical J values) 4pp
Sets out a method for determining crack opening displacement (CTOD) values in weld metal and heataffected zones of welded joints and includes methods of carrying out the tests. (WD-006)
3pp
Sets out a method for transverse butt tensile testing of a welded joint. (WD-006)
3pp
AS 21971978 Method for the micrographic assessment of the non-metallic inclusion content in wrought steel (ISO 4976) 24pp
Describes procedures for the comparison of micrographic images with standard Jernkontoret or ASTM charts. Details are given for the preparation of test pieces, test procedures, assessment of the images, expression of results and the preparation of a test report. The charts are reproduced full size. An example of assessment of a micrographic field and calculation of an average field rating number are given in appendices. (MT-008)
3pp
Sets out a method for all-weld-metal tensile testing of deposited weld metal. (WD-006)
Sets out a method for longitudinal fillet shear testing of a welded joint. The test determines the shear strength of a test specimen cut from a fillet welded joint having longitudinal welds. (WD-006)
2pp
3pp
Sets out a method for transverse joggle-butt testing of a welded joint. (WD-006)
Sets out a method for transverse fillet shear testing of a welded joint. The test determines the shear strength of a test specimen cut from a fillet welded joint having transverse welds. (WD-006)
6pp
Sets out a method for transverse guided bend testing of a welded joint. (WD-006)
4pp
3pp
Sets out a method for transverse free bend testing of a welded joint up to 12 mm thick. (WD-006)
Sets out a method for hot cracking testing of a welded joint. The test determines the susceptibility of weld metal to cracking while at elevated temperatures during or just after welding and is applied principally to ferritic steels. (WD-006)
AS/NZS 2201 Set:2008 Intruder alarm systems Set AS/NZS 2201 Intruder alarm systems
4pp
4pp
114pp
Sets out a method for longitudinal guided bend testing of a welded joint. (WD-006)
Sets out a method for corrosion testing of a welded austenitic stainless steel joint. (WD-006)
AS 22072007 Non-destructive testingUltrasonic testing of fusion welded joints in carbon and low alloy steel 49pp
Specifies the methods and requirements for the manual ultrasonic testing of full or partial penetration fusion welded joints in carbon and low alloy ferritic steels, 6 mm or greater in thickness, using A-scan and employing four sensitivity levels. (MT-007)
3pp
Sets out a method for tongue bend testing of a welded pipe joint. (WD-006)
32pp
2pp
23pp
Specifies requirements and a grading convention for monitoring centres and the operations, equipment and staff necessary to carry out monitoring of intruder alarm systems. (EL-031)
Sets out a method for nick-break testing of a welded joint. The test aids in revealing the presence of imperfections, such as slag inclusions, lack of fusion and porosity in a butt weld. (WD-006)
Amendment 1 5 August 1999 Specifies the functional properties of various safety glazing materials, including toughened glass, laminated glass, wired glass, organic-coated glass and plastic. Two grades are covered, with different impact performance levels. Other requirements include size tolerances, weathering and ageing performance. Test methods are given in some appendices, while others deal with sampling, acceptance pro-
69
AS 22091994
cedures and notes on safe performance criteria and human dynamics data. (BD-007)
29pp
AS/NZS 2210.7:2001 Additional specifications for safety footwear (ISO 8782-6:2000) 7pp
Specifies, by reference to AS/NZS 2210.2 and AS/NZS 2210.3, additional requirements for safety footwear. This Standard is identical with and has been reproduced from ISO 8782-6:2000. (SF-003)
Amendment 1 5 February 1997 Specifies poles suitable for electricity transmission and telecommunications purposes with or without full-length preservative treatment and, where required, gives preservative types and retentions required. The Standard also sets out requirements for pole identification as well as means for demonstrating compliance. Appendices include a test for differentiating sapwood and heartwood in softwoods; and example systems for process quality monitoring and purchaser treatment quality checks. (TM-003)
AS/NZS 2211.7:2002 Safety of products emitting infrared optical radiation, exclusively used for wireless 'free air' data transmission and surveillance (IEC/TS 60825-7 Ed. 1.0 (English 2000)) 16pp
Provides requirements and specific guidance for the safe use of products which emit infrared optical radiation, where such products are used exclusively for wireless 'free air' data transmission and surveillance. This Standard is identical with and has been reproduced from IEC TS 60825-7:2000. (SF-019)
AS/NZS 2210.8:2001 Additional specifications for protective footwear (ISO 8782-7:2000) 3pp
Specifies, by reference to AS/NZS 2210.2 and AS/NZS 2210.4, additional requirements for protective footwear. This Standard is identical with and has been reproduced from ISO 8782-7:2000. (SF-003)
AS/NZS 2210 Occupational protective footwear AS/NZS 2210.1:1994 Guide to selection, care and use 22pp
Provides users and purchasers of occupational protective footwear with recommended practices for the selection care and use of protective footwear in a wide range of primary, secondary and construction industries. Guidance for footwear care, fitting and foot protection programs is provided. (SF-003)
AS/NZS 2210.9:2001 Additional specifications for occupational footwear (ISO 8782-8:2000) 2pp
Specifies, by reference to AS/NZS 2210.2 and AS/NZS 2210.5, additional requirements for occupational footwear. This Standard is identical to and has been reproduced from ISO 8782-8:2000. (SF-003)
AS/NZS 2211.9:2002 Compilation of maximum permissible exposure to incoherent optical radiation (IEC/TR 60825-9 Ed. 1.0 (English 1999)) 46pp
Provides requirements for Maximum Permissible Exposure (MPE) values for the exposure of the human eye and skin to incoherent optical radiation from artificial sources in the wavelength range from 180 nm to 3000 nm. This Standard is identical with and has been reproduced from IEC TR 60825-9:1999. (SF-019)
AS/NZS 2211 Safety of laser products 73pp AS/NZS 2211.1:2004 Equipment classification, requirements and users guide (IEC 60825-1:2001, MOD) 111pp
Provides minimum requirements and specific guidance for the safe operation and maintenance of lasers and laser systems. The MPE (maximum permissible exposure) values of this Standard were developed for laser radiation other than for the purpose of medical treatment. Modified adoption of, and reproduced from, IEC 60825-1:2001. (SF-019)
AS/NZS 2211.10:2004 Application guidelines and explanatory notes to AS/NZS2211.1 (IECTR6082510:2002, MOD) 35pp
This Standard is an adoption with national modifications and has been reproduced from IECTR6082510:2002. It provides information on the physics relating to the dangers posed by laser products. It complements, but does not replace, the information in AS/NZS2211.1 by explaining the underlying principles. (SF-019)
Specifies requirements and where appropriate test methods to establish conformity with these requirements for footwear intended to protect the wearer's feet against foreseeable hazards in a variety of workplaces. This Standard has been reproduced from ISO 8782-1:1998 with additional requirements for Australia and New Zealand in an Appendix. (SF-003)
44pp
Amendment 1 5 May 1995 Amendment 2 5 January 1996 Amendment 3 1 May 1998 Specifies basic requirements for occupational protective footwear with specific requirements for heavy duty (Type 1), medium duty (Type 2), light duty (Type 3) and waterproof (Type 4) footwear. Requirements for steel and non-metallic toecaps are provided. Specific requirements for oil and chemical-resistant outsoles, penetration-resistant midsoles and electrically conductive and anti-static properties are also provided. (SF-003)
AS/NZS 2211.2:2006 Safety of optical fibre communication systems (OFCS) (IEC 60825-2 Ed. 3.0 (Bilingual 2005)) 47pp
Adopts IEC 60825-2:2005 which provides requirements and information on the safe operation of end maintenance of optical fibre communication systems (OFCS). (SF-019)
AS/NZS 2211.12:2006 Safety of free space optical communication systems used for transmission of information (IEC 60825-12 Ed. 1.0 (Bilingual 2004)) 33pp
Adopts IEC60825-12 Ed.1.0:2005, which provides requirements and specific guidance for the manufacture and safe use of laser products and systems used for point-to-point or point-to-multipoint free space optical data transmission. This Standard only addresses the open beam portion of the system. (SF-019)
9pp
AS/NZS 2211.3:2002 Guidance for laser displays and shows (IEC/TR 60825-3 Ed. 1.0 (Bilingual 1995)) 11pp
Provides guidance on the planning and design, set-up and conduct of laser displays and shows that use high power lasers. This Standard is identical with and has been reproduced from IEC 60825-3:1995. (SF-019)
AS 22121979 Elastomeric hose and hose assemblies for transferring anhydrous ammonia 12pp
Provides for hose and hose assemblies, classified in two types according to pressure, for handling anhydrous ammonia in liquid or gaseous form over a temperature range of 40C to +65C. The hose and hose assemblies have a particular use in agriculture. Constructional, dimensional and physical properties, and resistance to ammonia, low temperature and ozone are specified. In general, tests are prescribed by reference to AS 1180 but tests for resistance to ammonia and low temperature are described in appendices. A further appendix provides recommendations for periodical inspection, testing, handling and storage of hose and hose assemblies. (RU-001)
Specifies, by reference to AS/NZS 2210.2, basic and additional (optional) requirements for safety footwear. This Standard has been reproduced from ISO 87822:1998 with additional requirements for Australia and New Zealand in an Appendix. (SF-003)
AS/NZS 2211.4:2002 Laser guards (IEC 60825-4 Ed. 1.0 (English 1997))
18pp
9pp
Specifies, by reference to AS/NZS 2210.2, basic and additional (optional) requirements for protective footwear. This Standard has been reproduced from ISO 8782-3:1998 with additional requirements for Australia and New Zealand in an Appendix. (SF-003)
Provides requirements for laser guards, permanent and temporary, that enclose the process zone of a laser processing machine, and specifications for proprietary laser guards. This Standard is identical with and has been reproduced from IEC 60825-4:1997. (SF-019)
AS 2213 Commercial road vehiclesMechanical connections between towing vehicles AS 2213.12001 Selection and marking of pin-type couplings and drawbar eyes 10pp
Amendment 1 25 September 2002 Amendment 2 31 October 2007 Specifies the requirements for the selection and marking of pin-type couplings and drawbar eyes and gives the methods for the determination of the D-values and the V-values for typical vehicle configurations. (ME-053)
AS/NZS 2211.5:2006 Manufacturers checklist for AS/NZS2211.1 (IEC/TR 60825-5 Ed. 2.0 (Bilingual 2003)) 19pp
Adopts IEC/TR 60825-5Ed.2.0 (2005) to provide manufacturers of laser products and their agents with a checklist to ensure that each new or modified design complies with the requirements of AS/NZS2211.1. (SF-019)
AS/NZS 2210.6:2001 Additional requirements and test methods (ISO 8782-5:2000) 16pp
Specifies, by reference to AS/NZS 2210.2, additional requirements and test methods. This Standard has been reproduced from ISO 8782-5:2000 with modifications for application in Australia in an Appendix. (SF-003)
AS/NZS 2211.6:2002 Safety of products with optical sources, exclusively used for visible information transmission to the human eye (IEC/TS 60825-6 Ed. 1.0 (English 1999)) 16pp
Provides an adapted hazard categorization scheme and specific guidance for the safe use of visible optical sources that are used exclusively for transmission of information to the human eye. This Standard is identical with and has been reproduced from IEC TS 608256:1999. (SF-019)
AS 2213.22008 50 mm pin-type couplings and drawbar eyes (ISO 1102:2001, MOD) 13pp
Adopts ISO 1102:2001 which specifies characteristics of 50 mm drawbar eyes, necessary for the interchangeability of coupling components on trailers and permitting interchangeability between towing vehicles and trailers equipped with these components. (ME-053)
70
AS 2219.2.12002 Physical testsDetermination of resistance of vitreous enamel coatings on metal substrates to thermal shock 3pp
Specifies a procedure for assessing the resistance of vitreous and porcelain enamel coatings on metal substrates to sudden changes in temperature. (CH-007)
17pp
AS 2213.42008 Strength tests for pin-type couplings and drawbar eyes for rigid drawbars (ISO 12357-1:1999, MOD) 13pp
(ME-053)
Specifies requirements for plastics measures of the tumbler, conical and dropper forms as may be used within the domestic environmentnot being subjected to high temperature autoclaving/sterilization procedures. Specifications include accuracy of calibration markings, transparency, permanence of markings, resistance to mechanical shock and resistance to dishwasher cleaning. Provides procedures for testing compliance with a view to assessing suitability for SAA certification. (CH-001)
AS 2213.52008 Strength tests for pin-type couplings and drawbar eyes for hinged drawbars (ISO 8718:2001) 4pp
Adopts ISO 8718:2001 which specifies strength test conditions and requirements for 40 mm and 50 mm drawbar couplings and corresponding drawbar eyes for hinged drawbars. (ME-053)
2pp
19pp
Specifies the pre-examination qualifications and scope of examination required for granting of certificates to welding supervisors engaged in the supervision of welders of steel structures. (WD-003)
Specifies a method for the production of specimens suitable for testing vitreous and porcelain enamel coatings on aluminium, as well as the enamelling process for aluminium materials. (CH-007)
15pp
Amendment 1 5 October 1997 Sets out safety and performance requirements for packaging of up to 2 L or 2 kg of poisonous substances. (PK-024)
AS 2219.3.32002 Miscellaneous testsDetermination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) (ISO 13805:1999) 3pp
Specifies a method of test for the accelerated determination of the resistance of porcelain enamel coatings on aluminium and aluminium alloys to spalling as a result of exposure to moisture or weather. This Standard is identical with and has been reproduced from ISO 13805:1999. (CH-007)
AS 2220 Emergency warning and intercommunication systems in buildings AS 2220.11989 Equipment design and manufacture 34pp Available Superseded
Amendment 1 1 November 1989 Amendment 2 16 August 1993 Sets out requirements for the design and manufacture of equipment used in emergency warning and intercommunication systems installed in buildings to ensure warning in the event of an emergency and assist in the subsequent orderly evacuation of the buildings. Distinctive, easily recognizable, visible and audible signals are specified for the emergency warning system and an independent, integrated emergency intercommunication system between a control centre and other control points is described. Appendices provide information on typical systems and detail test procedures. (FP-002)
AS 2219 Methods of test for vitreous enamel coatings AS 2219.1.12002 Chemical testsDetermination of resistance of vitreous enamel coatings to hot sodium hydroxide (ISO 2745:1998) 5pp
Specifies a method of test for determining the resistance of flat surfaces of vitreous and porcelain enamels to a hot solution of sodium hydroxide. This Standard is identical with and has been reproduced from ISO 2745:1998. (CH-007)
Specifies requirements for all types of ophthalmic lenses for spectacles, both before and after laboratory processing and mounting into frames. Separate consideration is given to semi-finished lens blanks, finished uncut lenses and edged and mounted lenses. Lenses for non-prescription sunglasses, intra-ocular lenses, contact lenses and lenses for non-prescription protective eyewear are excluded from the scope of this Standard. (MS-024)
19pp
AS 2219.1.22002 Chemical testsDetermination of resistance of vitreous enamel coatings to boiling water and water vapour (ISO 2744:1998) 6pp
Specifies a method of test for determining the resistance of flat surfaces of vitreous and porcelain enamels to pure boiling water and or water vapour. This Standard is identical with and has been reproduced from ISO 2744:1998. (CH-007)
Specifies requirements for unglazed spectacle frames made from all types of materials and intended for use with corrective lenses. The component parts of a frame are defined, and diagrams of typical parts are provided. A measurement system and a marking system for frames are described. Performance requirements are given, with methods for determining frame endurance, corrosion, bridge strength and flammability provided in appendices. Frames for nonprescription sunglasses and frames to be used for products providing protection against industrial hazards, other than safety spectacles, are excluded from this Standard. (MS-024)
AS 2221 Methods for measurements of airborne sound emitted by compressor units including primemovers and by pneumatic tools and machines AS 2221.11979 Engineering method for measurement of airborne sound emitted by compressor/primemover units intended for outdoor use (ISO 2151:1972) 12pp
Describes a method for determining mean sound level and mean band pressure level of airborne sound. It is an engineering method which requires a controlled environment for repeatable results. (AV-006)
AS 2219.1.32002 Chemical testsDetermination of resistance of vitreous enamel coatings to boiling hydrochloric acid (ISO 2743:1986) 2pp
Specifies a method of test for determining the resistance of flat surfaces of vitreous and porcelain enamels to boiling hydrochloric acid. This Standard is identical with and has been reproduced from ISO 2743:1996. (CH-007)
AS/NZS 2230:1999 New pneumatic tyres for light trucks and trucks/buses. 9pp
Specifies requirements for physical dimensions, performance and marking for new pneumatic light truck and truck/bus tyres designed primarily for on-road use. (ME-056)
AS 2219.1.52002 Chemical testsDetermination of resistance of vitreous enamel coatings to citric acid at room temperature (ISO 2722:1997) 6pp
Specifies a method for the determination of resistance to citric acid, at room temperature, of vitreous and porcelain enamelled articles, and also specifies a method for classifying the results. This Standard is identical with and has been reproduced from ISO 2722:1997. (CH-007)
AS 2224 Medicine measures (including paediatric droppers) AS 2224.11986 GlassFor general use 17pp
12pp
Sets out specifications for low form glass beakers, with or without pouring lips for general laboratory purposes. (CH-001)
Specifies requirements for glass measures of the tumbler and conical form includingaccuracy of calibration markings, freedom from stress, transparency, permanence of markings, resistance to thermal shock, and soundness of packaging. Provides procedures for testing compliance of essential specifications with a
20pp
Applies to plastics tubing designed for use as fuel and emission control lines in automotive, marine, industrial, agricultural and domestic applications. It includes criteria and tests for high temperature fuel resistance, burst pressure, bend radius, moisture absorption, impact, vacuum collapse and chemical resistance. (PL-042)
71
AS 22392003
AS 22392003 Galvanic (sacrificial) anodes for cathodic protection 32pp
Specifies the requirements for galvanic (sacrificial) anodes for use in the cathodic protection of metals against corrosion. It specifies the composition of suitable alloys for magnesium, zinc and aluminium anodes and gives details of shape and design features of some commonly used anodes. It also includes details of backfill composition and properties, for buried magnesium and zinc anodes. (MT-014)
29pp
Specifies requirements and recommendations for the design, manufacture, selection and use of recirculating fume cabinets (sometimes referred to as 'ductless fume cupboards') for use in laboratories. Includes test methods to determine their performance. (CH-026)
AS 22531979 Methods for field measurement of the reduction of airborne sound transmission in buildings 28pp Available Superseded
Describes methods for the measurement of the field transmission loss and noise reduction of building partitions, including walls of all kinds, floor-ceiling assemblies, doors, etc. (AV-004)
30pp
AS 22411991 Data storage and transfer media9-track, 12.7 mm wide magnetic tape for information interchange using phase encoding at 126 ftpmm63 cpmm (ISO/IEC 3788:1990) 13pp
Specifies a format and recording standard for 9-track, 12.7 mm magnetic tape used for data processing, storage and transfer procedures. This Standard is identical with and has been reproduced from ISO/IEC 3788. (IT-001)
Specifies procedures and requirements for the segregation and storage of chemicals in laboratories and stores associated with laboratories. (CH-026)
AS 22541988 AcousticsRecommended noise levels for various areas of occupancy in vessels and offshore mobile platforms 6pp
Sets out maximum recommended noise levels within occupied spaces in new vessels and offshore mobile platforms of various categories depending on their length. The functions of the different spaces are taken into account. (AV-003)
3pp
Sets out requirements and dimensions for reusable and disposable test tubes suitable for general purposes. (CH-001)
AS/NZS 2243 Set:2006 Safety in laboratories Set AS/NZS 2243 Safety in laboratories AS/NZS 2243.1:2005 Planning and operational aspects 35pp
3pp
Sets out requirements for two types of glass filter funnels, funnels for general laboratory use and funnels for analytical purposes. (CH-001)
AS 22552003 Implants for surgeryMetal bone screws with hexagonal drive connection, spherical undersurface of head, asymmetrical thread Dimensions (ISO 5835:1991) 10pp
Specifies the dimensions and tolerances for metal bone screws used in surgery, having hexagonal drive connection, spherical under-surface of the head, and shallow and deep asymmetrical threads. The Standard is identical with, and has been reproduced from, ISO 5835:1991. (HE-012)
AS 22461996 Conical flasks and boiling flasks (narrow necked) (ISO 719:1985, ISO/DIS 1773) 15pp
Specifies requirements for conical flasks, flat bottom boiling flasks and round bottom boiling flasks, for general laboratory use. This Standard is based on, but not equivalent to ISO 1773. (CH-001)
Specifies requirements, recommendations and general guidelines to promote safety in laboratories. Covers laboratory planning, safety and emergency management for laboratories and general safety precautions relevant to a wide range of laboratories. (CH-026)
3pp
45pp
Specifies requirements, recommendations and guidelines to promote safety in laboratories where chemicals are handled. (CH-026)
Specifies requirements for the design, construction, buoyancy, colour retroreflectivity, and marking of rescue buoys intended to be thrown or dropped to a person in water to assist flotation. It does not apply to lifebuoys required to be carried by commercial vessels. Appendix contains the buoyancy test. Materials and certain test requirements are specified in AS 2259. (CS-060)
Sets out certain characteristics of 1,8-Cineole. This edition is to provide specifications for the oil from chromatographic analysis and the determination of flashpoint. (CH-021)
AS 22662002 Carbon steel spring wire for bedding and seating 11pp
Specifies requirements for carbon steel spring wire of round cross-section supplied in the hard-drawn condition, for the manufacture of coil springs (including helical lacing springs), square-formed springs and sinuous springs for bedding and seating used in the automotive, transport and furniture manufacturing industries. (MT-001)
73pp
2pp
Provides safety requirements for laboratories and precautions needed to prevent the exposure of workers and members of the public to excessive levels of radiation where sources of ionizing radiation are used. (CH-026)
Sets out certain characteristics of Australian sandarac resin to ensure the industry, producers and markets maintain consistent quality product. (CH-021)
AS 2252 Biological safety cabinets AS 2252.12002 Biological safety cabinets (Class I) for personnel and environment protection 13pp
Specifies requirements for Class I biological safety cabinets which are intended to provide protection from hazardous biological agents for personnel and the environment. (ME-060)
AS 22681979 Electrostatic paint and powder sprayguns for explosive atmospheres 20pp
Prescribes requirements in respect of design, construction and marking of the sprayguns and associated apparatus, and includes a section on testing. It also includes appendices which recommend conditions of use with flammable paints or powders, which apply without prejudice to any statutory requirements applying to paint or powder spray area and to the use of flammable liquids. (SF-039)
19pp
Sets out the general principles of safe operation of mechanical equipment and tools in laboratories. Particular attention is given to safe management of gas cylinders, harmful substances and hazardous operations. Additionally, guidelines for the safeguarding of machinery are included. (CH-026)
AS 2252.22004 Laminar flow biological safety cabinets (Class II) for personnel, environment and product protection 15pp
Specifies general construction and performance requirements for Class II laminar flow biological safety cabinets intended to provide protection for hazardous biological agents for personnel and the environment and also to protect material used in the cabinet from exogenous contamination. (ME-060)
26pp
22pp
Specifies requirements and gives recommended practices relating to electrical safety and electrical equipment in laboratories. (CH-026)
Amendment 1 14 March 2006 Specifies requirements for the manufacture, grading, finishing and branding of structural plywood. It provides specifications for both stress and surface grades and specifies veneer qualities, bond quality, standard lay-up construction, dimensional tolerances, joints, moisture content and characteristic strength and stiffness values for the nominated stress grades. Five surface grades, based on the veneer quality of the face and back veneers, A, S, B, C and D and one bond quality, Type A bond, are prescribed. (TM-008)
53pp
Specifies safety requirements for laboratory fume cupboards and test methods to determine their performance. Siting and maintenance requirements are specified and requirements and guidance for the use of fume cupboards are included. (CH-026)
AS 2252.21994 Laminar flow biological safety cabinets (Class II) for personnel, environment and product protection 10pp Available Superseded
Specifies requirements for laminar flow cabinets intended to provide protection from hazardous biological agents for personnel, the environment and to protect material used in the cabinet from contamination. Construction, air characteristic, acoustic, lighting and vibration requirements are given. (ME-060)
26pp
Amendment 1 5 October 1996 This Standard specifies requirements for the manufacture and grading of structural plywood. The Standard specifies veneer quality, bond quality, dimensional tolerances, joints, moisture content, visual grading rules and basic working stresses for the nominated stress grades as well as alternative methods for the determination of stress grades. Five surface grades, A, S, B, C and D, and one bond quality, Type bond, are prescribed. (TM-008)
72
4pp
2pp
Provides minimum performance requirements and specifications for the manufacture and application of structural plywood, acceptable to users, specifiers, manufacturers, and building authorities in Australia and New Zealand. (TM-008)
Specifies the requirements for single core cables intended for the construction of inductive vehicledetector loops for traffic signal installations, suitable for installation in slots cut into road surfaces. (EL-003)
Sets out a method for determining the apparent density of cellular materials. It is primarily intended for flexible cellular materials. (PL-036)
3pp
Sets out requirements for both watermarked and unwatermarked paper specifically manufactured for use by the banking industry to enable encoded documents to be satisfactorily processed in multiple passes through high-speed MICR reader-sorter equipment. (IT-008)
AS 2282.41999 Determination of apparent density of flexible cellular polyurethane sheeting up to 13 mm thick 2pp
Sets out a method for determining the apparent density of flexible cellular polyurethane sheeting up to 13 mm in thickness. (PL-036)
AS 2278 Aerosol containers AS 2278.12008 Metal aerosol dispensers of capacity 50 mL to 1000 mL inclusive 7pp
Specifies requirements for materials, construction, filling, performance, testing and marking for metal dispensers from 50 mL to 1000 mL, maximum net capacity, pressurized by liquefied, dissolved or compressed gasses. (PK-013)
1p
Sets out a method for determining the cell count on the surface of flexible cellular polyurethane. (PL-036)
AS 2279 Disturbances in mains supply networks AS 2279.21991 Limitation of harmonics caused by industrial equipment 12pp Obsolescent
Gives guidance on the harmonic interference to power supply networks produced by industrial equipment. (EL-034)
3pp
Sets out a method for determining the tear resistance of flexible cellular polyurethane. (PL-036)
4pp
Sets out two methods for determining the deflection force of flexible cellular polyurethane. Method A provides the indentation force on deflection and Method B gives the compression force on deflection. (PL-036)
3pp
Specifies three methods for determining the compression set of flexible cellular materials. (PL-036)
AS/NZS 2271:1999 Plywood and blockboard for exterior use 15pp Available Superseded
Specifies requirements for the construction, manufacture, grading and finish of plywood and blockboard for exterior use, where the product is exposed to the weather or to wet or damp conditions. It also includes specifications for veneer and core strip qualities, bond quality, joints, panel construction, dimensional tolerances and moisture content. Appendices provide information to be supplied with enquiries and orders, and suggestions for storage and handling. (TM-008)
61pp
3pp
Amendment 1 29 March 2006 Specifies requirements for ductile iron pressure pipes centrifugally cast in moulds, and ductile iron fittings of nominal sizes up to and including DN750, which are intended primarily for conveying water under pressure, but which may be used for conveying sewage or other liquids. Pipes and fittings are classified on the basis of the allowable operating pressure. (WS-016)
Sets out laboratory methods that are intended to imitate the effects of naturally occurring reactions such as oxidation or hydrolysis by humidity. The physical properties of interest are measured before and after the application of the specified treatments. (PL-036)
2pp
AS 22811993 Flexible cellular polyurethane for seat cushioning and bedding 9pp
Amendment 1 14 March 1994 Specifies requirements for flexible load-bearing cellular polyurethane for use in seat cushioning, bedding and similar applications. (PL-036)
Sets out a method for determining the resilience of flexible cellular polyurethane. (PL-036)
16pp
Specifies requirements for the manufacture, grading and finishing of plywood intended for marine use. (TM-008)
AS 2282 Methods for testing flexible polyurethane AS 2282.01999 Introduction and list of methods 4pp
(PL-036)
8pp
3pp
Lays down the height and shelving capacity for single-sided and double-sided library shelving of the cantilevered type. It includes loading requirements, stability criteria and finish. (BD-062)
Sets out a method for determining the amount of swelling that may occur when flexible celluar polyurethane is in contact with solvents. (PL-036)
AS/NZS 2276 Cables for traffic signal installations AS/NZS 2276.1:2004 Multicore power cables 11pp
4pp
Sets out a method for the measurement of the ease with which air passes through a cellular structure. Air flow values may be used as an indirect measurement of certain cell structure characteristics. (PL-036)
Specifies the requirements for PVC insulated and sheathed underground multicore power cables rated at 0.6/1kV for the interconnection of traffic signal posts and the associated control equipment. (EL-003)
9pp
14pp
Specifies requirements for screened, twisted balancedtwin feeder cable, intended for use in traffic signal installations for the interconnection of vehicle detector equipment and inductive type vehicle detector loops. (EL-003)
Sets out three methods for the measurement of test specimen dimensions of flexible cellular polyurethane. The methods are as follows:Method Athe reference method, which is also particularly applicable to dimensions less than 30 mm, utilizes a gauge with a circular foot;Method Bfor dimensions over 30 mm, utilizes vernier callipers;Method Cfor dimensions over 100 mm, utilizes a rule or tape measure. (PL-036)
Describes the method for determining the level of smoke release when a small, vertically oriented specimen of flexible cellular plastics of density less than 100 kg/m3, is exposed to a small flame. (PL-036)
2pp
Provides a method for determining the ash content of flexible cellular polyurethane material using an electrothermal radiant heater. (PL-036)
73
AS 22831990
AS 22831990 Elastomeric hose and hose assemblies for steam-cleaning machines 4pp
Specifies requirements for elastomeric hose and hose assemblies for use with steam-cleaning machines according to maximum permissible working pressure and with temperatures up to 200C. Materials and construction, dimensions and tolerances, and marking requirements are covered. Physical properties and resistance to chemicals are also dealt with. (RU-001) standby lighting or high risk task area lighting. Does not specify the types of buildings where these systems are required. Does not specify maintenance requirements (Refer to AS 2293.2). Does not detail constructional requirements for complying exit signs (Refer to AS 2293.3). Includes basic information to assist in correct choice and spacings of exit signs. (LG-007) ments for occupational diving operations. Appendices include a suggested content of an employers diving operations manual, metric and imperial decompression tables (with procedures for their use), guidance on the treatment of decompression illness and guidance for medical practitioners conducting diving medicals. (SF-017)
AS 22841979 Safe working with elastomeric hose and hose assemblies for steam-cleaning machines 4pp
Applies to safe working practice and defines procedures to be adopted to ensure safe working conditions in the handling and maintaining of hose and hose assemblies. (RU-001)
AS/NZS 2293.1:1998 System design, installation and operation 50pp Available Superseded
Sets out requirements for the design, installation and operation of electric emergency evacuation lighting systems for buildings, so as to provide visual conditions which will alleviate panic and permit safe evacuation of the building's occupants, should this be necessary, in the event of failure of the electrical supply to the normal lighting. Does not specify types of buildings nor particular locations which should be provided with emergency evacuation lighting. (LG-007)
AS/NZS 2299.1 Supplement 1:2007 Standard operational practice Supplement 1: AS/NZS 2299 diving medical examination forms (Supplement to AS/NZS 2299.1:2007) 125pp
Comprises the medical questionnaire and examination findings forms given in AS/NZS 2299.1:2007, published in pad form. (SF-017)
68pp
11pp
Specifies requirements for guards suitable for use with domestic heating appliances to prevent prolonged contact by persons in the vicinity. (CS-007)
10pp
AS/NZS 2290 Electrical equipment for coal mines Introduction and maintenance AS/NZS 2290.1:2005 For hazardous areas 14pp
Specifies requirements for the introduction, examination, maintenance, in situ repair and allowable modifications to electrical equipment designed for use in hazardous areas in and around underground coal mines. (EL-023)
Amendment 1 5 May 1998 Amendment 2 5 August 2008 Sets out periodic inspection and maintenance procedures for emergency evacuation lighting systems for buildings. The procedures are intended to ensure that such systems will be in a state of readiness for operation at all times. Requirements apply to the central and single-point emergency lighting systems, as defined in AS/NZS 2293.1. (LG-007)
Specifies requirements for personnel, equipment and procedures for diving performed as part of professional scientific research, natural resource management or scientific research as an educational activity. Appendices include competency of divers and training requirements, diving operations manual content, hand and lifeline signals, guidance on hazard identification, risk assessment and control, and exposure to altitude following diving. (SF-017)
19pp
AS/NZS 2293.3:1995 Emergency luminaires and exit signs 32pp Available Superseded
Amendment 1 5 May 1998 Sets out requirements for the design, construction, performance and testing of emergency luminaires and exit signs to ensure that they function in a safe and effective manner under expected operational and environmental conditions. Applies both to emergency luminaires and exit signs which are centrally supplied and emergency luminaires and exit signs of the selfcontained type. Different requirements are specified for application in Australia and New Zealand, particularly with respect to exit signs. (LG-007)
Specifies requirements for personnel, equipment and procedures for diving associated with the production of films, videos, television and photographic stills. (SF-017)
AS 2300 Methods of chemical and physical testing for the dairying industry AS 2300.01995 Introduction and list of methods 4pp
(FT-024)
AS 2292 Methods for the analysis of solders AS 2292.11979 Determination of tin (volumetric method) 10pp
Describes a volumetric method for determination of tin content of solders with tin content 570%. (CH-010)
AS 2300.1.12008 General methods and principles Determination of total solids and moisture 9pp
(FT-024)
AS 2292.21987 Determination of silver, bismuth, cadmium, copper, antimony, iron and zinc Flame atomic absorption spectrometric method 7pp
Sets out a flame atomic absorption spectrometric method for the determination of silver, bismuth, cadmium, copper, antimony, iron and zinc in solders. Two dilution procedures are described in the method: the top-loading balance dilution procedure and the volumetric dilution procedure. The method is a new addition to the AS 2292 series of Standards for the chemical analysis of solders. (CH-010)
AS 2294 Earth-moving machineryProtective structures AS 2294.11997 General (ISO 3164:1995, ISO 3449:1992, ISO 3471:1994)
AS 2300.1.2.11991 General methods and principles Determination of nitrogenReference Kjeldahl method 7pp
Sets out the reference Kjeldahl method for the determination of nitrogen in milk, milk fractions and milk products. The method allows for the estimation of nitrogen on a mass/mass basis and a mass/volume basis. (FT-024)
11pp
Specifies requirements for roll-over protective structures and falling-object structures additional to those given in AS 2294.2 and AS 2294.3. (ME-063)
AS 2293 Set2005 Emergency escape lighting and exit signs Set AS 2293 Emergency escape lighting and exit signs for buildings AS 2293.12005 System design, installation and operation 57pp
Amendment 1 2 September 2008 Specifies the requirements for the design and installation of systems of emergency escape lighting and illuminated exit signage intended to illuminate upon failure of supply to the normal lighting. Includes requirements specific to central battery and single point/self contained arrangements. Does not include
AS 2294.1 Supplement 12003 GeneralOperator protective structures fitted to plant used in timber industry (forest operations) (Supplement to AS 2294.11997) 14pp
Sets out the requirements for manufacturers and users of plant used in the timber industry on roll-over protective structures, falling object protective structures and operator protective guards in the form of cabins or canopies fitted to such plant. (ME-063)
AS 2300.1.2.22008 General methods and principles Determination of nitrogenNitrogen fractions from milk 6pp
(FT-024)
AS/NZS 2299 Occupational diving operations AS/NZS 2299.1:2007 Standard operational practice 159pp
AS 2300.1.4.11996 General methods and principles Determination of fat content of milks and liquid dairy products by the Babcock methodGlassware 16pp
Provides general information on standard methods for the analysis of dried milk and whey. (FT-024)
Specifies requirements for personnel, equipment and procedures used in occupational underwater operations in up to 50 m depth of water using compressed air or similar oxygen-nitrogen mixtures as the breathing medium. Also gives details on compression chamber support, accident reporting and medical require-
74
AS 2300.4.81994 Dried milk and dried milk products Determination of undenatured whey protein nitrogen (UDWPN) in dried skim milk 7pp
Sets out a method for the determination of the undenatured whey protein nitrogen (UDWPN) content of dried skim milk. (FT-024)
AS 2300.1.52008 General methods and principles Determination of ash AS 2300.1.61989 General methods and principles Determination of pH
7pp
(FT-024)
AS 2300.2.111990 Liquid milksDetermination of density and estimation of solids-not-fat (SNF) Hydrometer method 4pp
Describes a hydrometer method for determining the density of liquid milk with the fat in the liquid state and provides equations relating the known fat content and measured density to percentage of solids-not-fat (SNF) in the milk. (FT-024)
AS 2300.4.91994 Dried milk and dried milk products Determination of lactoseEnzymatic method 16pp
Sets out two methods using enzymatic techniques for the determination of lactose in dried milk and dried milk products, as follows:Method A: utilizes the glucose moiety of the lactose;Method B: utilizes the galactose moiety of the lactose. (FT-024)
3pp
Sets out a method for determining the pH value of dairy product. (FT-024)
AS 2300.1.71990 General methods and principles Determination of extraneous matter in dairy products 5pp
Sets out a method for the determination of extraneous matter in a range of dairy products including raw, pasteurized, homogenized and evaporated milks, sweetened condensed milk, cream, butter, cheese and cheese powders, ice-cream, and cultured milk products. (FT-024)
AS 2300.4.11994 Dried milk and dried milk products General information and preparation of samples 2pp
Provides general information on standard methods for the analysis of dried milk and whey. (FT-024)
AS 2300.4.101994 Dried milk and dried milk products Determination of lactoseTitrimetric method
3pp
Sets out a titrimetric method for the determination of the lactose content of dried milk and dried milk products. (FT-024)
2pp
AS 2300.1.7 Supplement 11990 General methods and principles Determination of extraneous matter in dairy productsReference print (Supplement to AS 2300.1.71990)
(FT-024)
Sets out a general basis for the sensory examination of dried milks and whey. (FT-024)
AS 2300.1.82008 General methods and principles Assessment of instrumental methods Protein in milk and infrared spectrometric analysis of milk 13pp
(FT-024)
AS 2300.4.31994 Dried milk and dried milk products Determination of bulk density of dried milk (ISO 8967:1992) 4pp
Sets out a method for determining the bulk density of instant and non-instant dried milks, dried buttermilk, dried whey, and dried milk-based infant food. (FT-024)
AS 2300.1.92008 General methods and principles Determination of sucrose and glucose Enzymatic method 6pp
(FT-024)
AS 2300.4.41994 Dried milk and dried milk products Determination of insolubility index (ISO 8156:1987)
8pp
Sets out a method for determining the insolubility index, as a means of assessing the solubility of instant or non-instant dried milks, dried buttermilk, dried whey, and dried milk-based infant food. (FT-024)
AS 2300.4.51994 Dried milk and dried milk products Determination of scorched particles and extraneous matter (ISO 5739:1983) 3pp
Sets out a method for determining the scorched particles content and the presence of extraneous matter in dried milks, dried buttermilk and dried whey. (FT-024)
3pp
AS 2300.2.11996 Liquid milksMethod for determining the efficiency of homogenization of milk 3pp
Sets out a method for determining the efficiency of homogenization of milk. (FT-024)
Amendment 1 16 March 1992 Amendment 2 5 March 1997 Sets out two methods for the determination of the salt (sodium chloride) content of cheese as follows:(a) Volhard method;(b) Potentiometric method. (FT-024)
AS 2300.2.32008 Liquid milksDetermination of the iodide content of milkSelective ion electrode method 9pp
(FT-024)
AS 2300.4.5 Supplement 11994 Dried milk and dried milk products Scorched particle standards for dry milks (Supplement to AS 2300.4.51994)
Provides a reference print for scorched particles and extraneous matter for analytical tests on dried milk and whey. (FT-024)
AS 2300.6.81997 CheeseDetermination of nitrate and nitrite in cheese by cadmium reduction and photometry (ISO 4099:1984) 6pp
This Standard is identical with and reproduced from ISO 4099:1984. (FT-024)
AS 2300.4.61994 Dried milk and dried milk products Determination of dispersibility and wettability of instant dried milk 6pp
Sets out a method for determining the dispersibility in water of instant dried milk and a rapid method for determining the wettability in water of instant dried milk. (FT-024)
AS 2300.4.71994 Dried milk and dried milk products Determination of the heat stability of skim milk powder 3pp
Sets out a method for determining the heat stability of skim milk powder intended for reconstitution as evaporated milk and provides an indication of the suitability of the powder for this purpose. (FT-024)
2pp
Sets out a method for determining the salt content of butter. The method is also applicable to products comprising a blend of butter and edible oils that have a similar fat content to that of butter. (FT-024)
75
AS 2300.8.12004
AS 2300.8.12004 Anhydrous milk fatScope and general requirements 2pp
Sets out general requirements applicable to the chemical analysis of anhydrous milk fat. (FT-024)
AS 2300.10.61991 Caseins, caseinates and coprecipitates Determination of free acidity of caseins 3pp
Sets out a method for determining the free acidity of caseins, obtained by acid precipitation or lactic fermentation, and of rennet caseins. (FT-024)
3pp
Specifies the method for determining the force required to unwind pressure-sensitive adhesive tape from a roll. (PK-025)
AS 23092008 Durability of galvanized and electrogalvanized zinc coatings for the protection of steel in structural applicationsAtmospheric 22pp
Provides classification guidelines for the durability of galvanized and electrogalvanized coatings for structural applications in various atmospheric environments. (MT-014)
31pp
Provides a vocabulary of commonly used terms for paint and related materials, and for painting. (CH-003)
AS 2300.10.11991 Caseins, caseinates and coprecipitates General information and preparation of samples 2pp
Provides general information on standard methods for the analysis of caseins, caseinates and coprecipitates, and sets out requirements for preparing samples for testing. (FT-024)
104pp
Provides guidelines on products and procedures for the painting of buildings for domestic, commercial and industrial use. Discusses different material surfaces, paint products, the preparation of unpainted and prepainted surfaces and gives recommendations for painting systems for new and maintenance work. Includes recommendations for some specialized service applications, guidelines on the preparation of a paint system specification and discusses inspection and testing protocols. (CH-003)
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings 130pp
Amendment 1 2 August 2004 Provides guidelines for the selection and specification of coating systems for the short, medium and long term protection of structural steel work against interior and exterior atmospheric, and non-atmospheric corrosive environments. The following aspects are covered in detail: Atmopspheric environments, planning and design, surface preparation treatments, metallic and paint coatings, maintenance of coating systems, inspection and testing, and preparation of coating specifications. Contains comprehensive details of modern paint systems, including properties and typical applications. (MT-014)
AS 2300.10.3 Supplement 11991 Caseins, caseinates and coprecipitates Assesment of colour of caseinsColour standards for untreated and heat-treated acid casein and for wet-heat-treated rennet casein (Supplement to AS 2300.10.3 1991)
(FT-024)
AS 2313 Methods of test for single sided and double sided pressure-sensitive adhesive tape AS 2313.02006 Method selection guide 10pp
AS 2300.10.3 Supplement 21991 Caseins, caseinates and coprecipitates Assessment of colour of caseinsColour standards for untreated rennet casein (Supplement to AS 2300.10.31991)
(FT-024)
Provides guidance on selection of test methods in the AS 2313 series of Standards. (PK-025)
3pp
Specifies the method for determining the adhesive strength of pressure-sensitive adhesive tape to a stainless steel test panel. (PK-025)
3pp
AS 2313.1.22005 AdhesionQuickstick
3pp
Specifies the method for determining the elongation at break of pressure-sensitive adhesive tape. (PK-025)
AS 2300.10.4 Supplement 11991 Caseins, caseinates and coprecipitates Determination of filterable material Photographic reference standards (Supplement to AS 2300.10.41991)
(FT-024)
Specifies the method for determining quickstick of pressure-sensitive adhesive tape. (PK-025)
2pp
4pp
Specifies the method for determining the length of pressure-sensitive adhesive tape in a roll. (PK-025)
Specifies a method for determining the comparative tack of pressure-sensitive adhesion tape by rolling a ball over an adhesive to determine tack. (PK-025)
2pp
AS 2300.10.51991 Caseins, caseinates and coprecipitates Determination of particle-size distribution in caseins 2pp
Sets out a procedure for determining the particle-size distribution in caseins. (FT-024)
Specifies the method for determining the thickness of pressure-sensitive adhesive tape. (PK-025)
76
16pp
Specifies requirements for manufacture, marking and testing of swivels for hoists. It does not include dimensional requirements for size. Guidance on information to be supplied with enquiries and orders and on care and use is given in appendices. (ME-025)
interconnected with shear connectors, including applications where the slab incorporates profiled steel sheeting. (BD-032)
111pp
20pp
Specifies requirements for forged rigging screws and forged turnbuckles used in tension. It does not apply to rigging screws or turnbuckles that are used in compression or are smaller than 10 mm. Guidance on information that should be supplied with enquiries and orders and on care and use in appendices. (ME-025)
AS 2320 Implants for surgeryMetallic materials AS 2320.22003 Unalloyed titanium (ISO 5832-2:1999)
3pp
Sets out minimum requirements for the design, detailing and construction of simply supported composite beams composed of a steel beam interconnected to a concrete slab by shear connectors, including applications in which the slab incorporates profiled steel sheeting. Covers strength and serviceability design for flexure, transverse and longitudinal shear and their interdependence as well as design for fire-resistance. Permits the use of partial shear connection and a wider variety of steel beam sections and shear connector types than previously allowed. Includes detail requirements for construction loads, slab reinforcement and sheer connector positioning, along and transverse to the beam length. Also included are a number of appendices containing design flowcharts and other helpful information. (BD-032)
Specifies the characteristics of, and corresponding test methods for, unalloyed titanium for use in the manufacture of surgical implants. This Standard is identical with, and has been reproduced from, ISO 58322:1999. (HE-012)
8pp
Specifies general dimensions, material and accuracy for heads with rotating and non-rotating spindles. Information on calibration of the more important parameters of the heads is in an appendix. (ME-027)
23pp
3pp
Specifies the method for determining the stability of pressure-sensitive adhesive tape is suitable for longterm mending of paper by qualitatively assessing adhesive ooze and colour stability. (PK-025)
Specifies the characteristics of, and corresponding test methods for, wrought titanium aluminium-vanadium alloy for use in the manufacture of surgical implants. This Standard is identical to, and has been reproduced from, ISO 5832-3:1996. (HE-012)
Specifies requirements for mastic adhesives used for bonding various porous substrates such as hardboard, cement sheet, particle board, plywood and wallboard panels to wood framing for interior use. Does not apply to adhesives for gypsum-board or plasterboard. (CH-017)
AS 2331 Methods of test for metallic and related coatings AS 2331.02006 Method selection guide 13pp
Gives guidance on the selection of the appropriate methods for the testing of metallic and related coatings. (MT-009)
16pp
2pp
Specifies the characteristics of, and corresponding test methods for, Wrought cobalt-nickel-chromiummolybdenum alloy for use in the manufacture of surgical implants. This Standards is identical to, and has been reproduced from, ISO 5832-6:1997. (HE-012)
Specifes a method, based on anode dissolution, for measuring the thickness of metallic coatings. An Appendix lists typical electrolytes which can be used for measuring the thickness of various coating types on common metal substrates. (MT-009)
21pp
Specifies requirements for non-calibrated chain for lifting purposes, which are manufactured from electrically welded round-steel short links. (ME-025)
AS 23142006 Radiography of metalsImage quality indicators (IQI) and recommendations for their use 26pp
Specifies requirements for three types of image indicators (IQI) used in X-ray or gamma-ray radiographic examination of metals. (MT-007)
AS 23251993 Tungsten filament lamps for general service Performance requirements (IEC 60064 Ed. 5.0 (1987)) 22pp
Specifies performance requirements for incandescent lamps rated 25 W to 200 W with a voltage or voltage range of 100 V to 250 V and a nominal life of 1000 h, and a method to be used by manufacturers to show compliance with the requirements of the Standard. This Standard is identical with and has been reproduced from IEC 64:1987. (EL-041)
AS 2331.1.42001 Local thickness testsMagnetic induction and eddy current methods 7pp
Specifies requirements for two methods of local thickness testing. The magnetic induction method is suitable for the measurement of thickness of gold, silver, tin, cadmium, lead and organic coatings on magnetic substrates. The eddy current method is suitable for measurement of thickness of anodic coatings and organic coatings on aluminium. (MT-009)
17pp
Specifies requirements for forged collared eyebolts for lifting purposes. Guidance on care and use and on information that should be supplied with enquiries and orders is given in appendices. (ME-025)
Sets out minimum requirements for the design, detailing and construction of simply supported composite beams composed of a steel beam and a concrete slab
77
AS 2331.1.62004
AS 2331.1.62004 Local thickness testsTaper section method AS 2331.3.62001 Corrosion and related property tests Electrographic porosity test 4pp
Sets out a method for the determination of the degree of porosity in gold and gold-alloy electroplated coatings on copper base, nickel and tin-nickel alloys. (MT-009) (MT-009)
8pp
Specifies a method for measuring the local thickness of metallic coatings on various substrates, by micrographic examination of a taper-cross-section. (MT-009)
AS 2331.1.72006 Local thickness testsMeasurement of dry film thickness of thin coating systems particularly by coil coated products by destructive means using a boring device 6pp
Specifies the test method for the measurement of dry film thickness of coating films by microscopic observation of a precision-cut shallow-angle crater in the coating film. (MT-009)
AS 2331.3.72004 Corrosion and related property tests Corrodkote (Corr) test (ISO 4541:1978, MOD) 4pp
Specifies the procedure for assessment of metallic and related coating by the corrodkote procedure. It is an adoption with national modification of ISO 4541:1978. (MT-009)
32pp
AS 2331.2.12001 Tests for average coating mass per unit area or for thicknessDissolution methodsStrip and weigh and analytical 6pp
Sets out the following three dissolution methods for the determining average mass or coating thickness; strip and weigh (dissolution of coating), strip and weigh (dissolution of basis metal), and analytical. (MT-009)
AS 2331.3.82001 Corrosion and related property tests Humidity test24 h cycle, damp heat 3pp
Sets out a method for assessing the suitability of inorganic and organic coatings for use in, or to be stored under, conditions of high humidity and subject to temperature fluctuations. (MT-009)
Sets out requirements for slide fasteners which include strength and durability, colourfastness and dimensional stability. A classification system based on chain width is specified with performance classes ranging from ultra light to ultra heavy. Properties specific to end use and fasteners of a complicated nature such as three way or double-pull are not included in the scope. (TX-018)
4pp
AS 2331.2.32001 Tests for average coating mass per unit area or for thicknessHydrogen evolution method for zinc coatings 5pp
Sets out the hydrogen evolution method for the determination of the average mass per unit area, or thickness, of zinc coatings on steel. The test requires the use of apparatus to measure the volume of hydrogen liberated resulting from the dissolution of the coating. (MT-009)
AS 2331.3.92001 Corrosion and related property tests Metallic coatingsPorosity testsFerroxyl test 4pp
Describes a method of revealing pores or other discontinuities in metallic coatings that are not visibly affected by ferricyanide and chloride ions during the test period and that are cathodic to iron and steel. (MT-009)
Requirements for resistance to entry by water of wristwatches for general use that are described as waterresistant; specifies non-destructive test methods. Does not apply to divers' watches. (CS-050)
16pp
Specifies dimensions and requirements for nails used in building and similar industries, including bullet head, flat head, hardboard, wallboard, cement sheet, flex sheet, soft sheet, clout, plasterboard, decking spike, duplex, roofing and fencing staple types. (ME-029)
AS 2331.3.102001 Corrosion and related property tests Cracks and pores in chromium 3pp
Sets out two methods, the macro method and the micro method, for the assessment of the distribution of cracks and pores in electroplated coatings of chromium. (MT-009)
AS 2331.3.12001 Corrosion and related property tests Neutral salt spray (NSS) test 8pp
Specifies a method for the neutral salt spray test for the assessment of corrosion resistance of inorganic and organic coatings on metallic substrates. The conditions within the test cabinet are tightly controlled with the pH of the collected test solution being limited to 6.5 and 7.2. (MT-009)
9pp
AS 2331.3.112004 Corrosion and related property tests Chemical residue tests 4pp
Specifies four tests methods for determining the presence of contaminants including roisin, on electroplated coatings used for engineering, decorative, or protective applications, and on printed circuit boards. (MT-009)
Specifies materials of construction, and design and construction of hand-held meat knives, particularly the design and provision of guards. The performance requirements also take account of occupational safety and health requirements applied by regulatory authorities responsible for food processing. This Standard does not apply to mechanically operated meat knives. (SF-030)
AS 2331.3.22001 Corrosion and related property tests Acetic acid salt spray test (ASS test) 8pp
Specifies a method for the acetic acid salt spray test for the assessment of corrosion resistance of inorganic and organic coatings on metallic substrates. The conditions within the test cabinet are highly controlled with the pH of the collected test solution being limited to 3.1 and 3.3. (MT-009)
AS 2331.3.122006 Corrosion and related property tests Cyclic salt fog/UV exposure of organically coated metal 5pp
Specifies the basic principles and operating test for cyclic corrosion/UV exposure of paints on metals, using alternating periods of exposure in two different cabinets; a cycling salt/dry cabinet, and a fluorescent UV/condensation cabinet. (MT-009)
AS 2337 Gas cylinder test stations AS 2337.12004 General requirements, inspection and testsGas cylinders 54pp
Specifies requirements and procedures for a gas cylinder test station to carry out initial and periodic inspection of gas cylinders covered by AS2030.1 and test stations to obtain a certificate of conformity. (ME-002)
AS 2331.3.32001 Corrosion and related property tests Copper accelerated acetic acid salt spray test (CASS test) 8pp
Specifies a method for the copper accelerated acetic acid salt spray test for the assessment of corrosion resistance of inorganic and organic coatings on metallic substrates. The conditions within the test cabinet are tightly controlled with the pH of the collected test solution being limited to 3.1 and 3.3. (MT-009)
AS 2331.3.42001 Corrosion and related property tests Thioacetamide anti-tarnish and porosity tests 3pp
Sets out the method for assessing the tarnish resistance of electroplated coatings that form visible sulfides or for estimating porosity in non-tarnishing deposits on metals that form visible sulfides. (MT-009)
5pp
AS 2337.32006 Transportable gas cylindersPeriodic inspection and testing of composite gas cylinders (ISO 11623:2002, MOD) 39pp
Amendment 1 13 November 2007 Adopts ISO 11623:2002 with national modifications specify requirements for periodic inspection and testing of hoop wrapped and fully wrapped composite transportable gas cylinders of water capacity from 0.5L up to 450L. (ME-002)
AS 2331.3.52001 Corrosion and related property tests Sulfur dioxide/hydrogen sulfide porosity tests 4pp
Sets out methods for assessing the degree of porosity in electroplated metallic coatings, such as gold, palladium and rhodium, that cover undercoats and basis metals that form visible compounds due to coating porosity, when exposed to sulfur dioxide-hydrogen sulfide atmospheres. (MT-009)
Specifies a simple bend test for determining the ductibility of electroplated coatings. (MT-009)
78
17pp
Specifies requirements for the form, dimensions, material and finish of tubular steel posts and attachments, used for the support of traffic signal lanterns, pedestrian push-button assemblies and ancillary equipment. It does not apply to special overhead structures such as mast arms and gantries which may be used for this purpose. (LG-006)
AS/NZS 2341 Methods of testing bitumen and related roadmaking products AS/NZS 2341.0:2002 General introduction and list of standards 2pp
Provides a general introduction and a list of standards for testing bitumen and related roadmaking products. (CH-025)
3pp
Sets out a procedure for the determination of the ductility of bitumen. (CH-025)
4pp
4pp
Sets out procedures for the determination of the penetration of bitumen and related roadmaking products. (CH-025)
Sets out a method for determining the consistency of bitumen emulsion at 25C using the Engler viscometer. (CH-025)
3pp
1p
Defines terms used to express the precision of the test result obtained from a test method, and the terms used in the presentation of precision data. (CH-025)
Sets out a method for determining the quantity of bituminous emulsion residue that is retained on a specified sieve. (CH-025)
AS 2341.21993 Determination of dynamic (coefficient of shear) viscosity by flow through a capillary tube 7pp
Sets out procedures for the determination of dynamic viscosity of materials having viscosities in the range 0.0036 Pa.s to 80 000 Pa.s. (CH-025)
2pp
(CH-025)
5pp
Sets out a procedure that gives an approximation of the volatile constituents in cutback bitumen. (CH-025)
AS/NZS 2341.5:1997 Determination of apparent viscosity by 'Shell' sliding plate micro-viscometer 8pp
Sets out a procedure for the determination of apparent viscosity of bitumens at a specified shear strain rate by means of the 'Shell' sliding plate micro-viscometer. (CH-025)
AS 2341.311998 Measurement of water content of emulsions by automated Karl Fischer titration 3pp
Sets out a procedure for the determination of the water content of bituminous emulsions having water contents in the range 10 % to 80 %, using automated Karl Fischer titration equipment with electrometric endpoint detection. (CH-025)
2pp
Sets out a procedure for the determination of density of bituminous materials using a hydrometer. This method is applicable to low viscosity materials (1.0 Pa.s or less at the temperature of test) which contain a negligible amount of highly volatile materials. (CH-025)
AS 23421992 Development, testing and implementation of information and safety symbols and symbolic signs 34pp
Specifies procedures for determining the need for, and the selection, testing and design of, graphic symbols and symbolic signs. It covers both graphic symbols which may be used alone in equipment operating instructions or representations on maps and diagrams, and public information and safety signs incorporating graphic symbols. This edition combines the subject areas of the six parts of the previous edition into a single Standard. (MS-003)
7pp
Specifies requirements for the preparation of samples of materials as in AS 2008 and unidentified or improperly identified bituminous materials which may be classified as AMC 5, 6 or 7 in accordance with AS 2157. (CH-025)
12pp
Specifies the requirements for bullet-resistant panels and elements according to their performance in preventing penetration by projectiles discharged from firearms under controlled conditions. This Standard applies to transparent, opaque and translucent panels. (MS-043)
2pp
Sets out a method for determining the nature of the charge on particles of bituminous emulsion, as indicated by the bitumen deposited on electrodes to which an electric current is applied. (CH-025)
AS/NZS 2344:1997 Limits of electromagnetic interference from overhead a.c. powerlines and high voltage equipment installations in the frequency range 0.15 to 1000 MHz 17pp
Amendment 1 31 May 2007 Specifies electromagnetic emission limits for a.c. overhead power lines and high voltage equipment, and methods of measurement to ascertain compliance. (TE-003)
79
AS 23452006
AS 23452006 Dezincification resistance of copper alloys 14pp
Specifies procedures for determining the resistance of copper-base alloys containing zinc dezincification. (MT-014)
AS/NZS 2350.5:1999 Determination of soundness of portland and blended cements 4pp Available Superseded
(BD-010)
AS 2350.121995 Preparation of a standard mortar and moulding of specimens 8pp Available Superseded
(BD-010)
AS 23471998 Zinc and zinc alloysSampling for chemical and spectrochemical analysis 11pp
Sets out methods for obtaining a representative sample of zinc and zinc alloys and procedures for the preparation of laboratory samples required for the determination of their chemical composition by both chemical and spectrochemical analyses. (CH-010)
AS 2350.72006 Determination of temperature rise during hydration of portland and blended cements 10pp
Sets out the method for determining temperature rise during the hydration of portland and blended cements, under precisely defined conditions. (BD-010)
AS 23491991 Method of sampling portland and blended cements 2pp Available Superseded
Sets out procedures to be used for obtaining samples, method of packing samples and necessary labelling requirements for cement in a continuous stream or a discrete lot. (BD-010)
AS 2350.71997 Determination of temperature rises during hydration of portland and blended cements 10pp Available Superseded
Describes procedures for the determination of temperature rise during the hydration of portland and blended cements. (BD-010)
AS 2350.131995 Determination of drying shrinkage of portland and blended cement mortars 11pp Available Superseded
Amendment 1 5 May 1997 (BD-010)
6pp
(BD-010)
AS/NZS 2350.8:1999 Fineness index of portland cement by air permeability method 7pp Available Superseded
(BD-010)
AS 2350.141996 Length change of portland and blended cement mortars exposed to a sulfate solution 8pp Available Superseded
Specifies the procedure for determining the length change of mortar bars of defined composition immersed in a sodium sulfate solution. The length of change is taken as a measure of the sulfate resistance of portland and blended cement. (BD-010)
AS/NZS 2350 Methods of testing portland and blended cements AS/NZS 2350.0:1999 General introduction and list of methods 1p
(BD-010)
5pp
Describes methods and provisions to be complied with for taking samples of cement representative of given lots for testing to assess the quality of products prior to, during or after delivery. (BD-010)
6pp
Sets out the method for determining, by proven chemical methods, the required composition of cement. (BD-010)
AS/NZS 2350.16:2001 Determination of air content of masonry cement 4pp Available Superseded
(BD-010)
6pp
(BD-010)
AS/NZS 2350.3:1999 Normal consistency of portland and blended cements Available Superseded AS/NZS 2350.4:2006 Setting time
Amendment 1 22 September 2008
9pp
6pp
Sets out the reference method for determining the compressive strength of cement. (BD-010)
(BD-010)
9pp
(BD-010)
3pp
(BD-010)
AS/NZS 2350.4:1999 Setting time of portland and blended cements 4pp Available Superseded
(BD-010)
AS/NZS 2350.11:1997 Compressive strength of portland and blended cement 9pp Available Superseded
Amendment 1 5 May 1999 Describes procedures for determination of the compressive strength of portland and blended cements. (BD-010)
AS/NZS 2350.18:2001 Determination of water retention of masonry cement 9pp Available Superseded
(BD-010)
7pp
4pp
Sets out the method for determining the soundness of cement using a paste of normal consistency. (BD-010)
Specifies requirements for products used for sanitizing nappies by soaking, together with descriptions of the appropriate test procedures for evaluating the products. (CS-032)
80
35pp
Specifies requirements for the design, construction and performance of push-button assemblies used in conjunction with intersections or foot crossings controlled by traffic signals, for the purpose of registering a pedestrian demand. Includes requirements covering the form and dimensions of various elements of the assembly, to facilitate uniformity in the appearance of the equipment to road users. Also specifies requirements for audible and tactile signals to assist pedestrians who are visually impaired. (LG-006)
36pp
34pp
Specifies the safety requirements for the manufacture, application and maintenance of powered industrial trucks. This Standard is technically equivalent with and reproduced from ISO 3691:1980, including Amendment 1:1983. (ME-026)
AS 23541991 Open top metal cansDefinitions, and determination methods for dimensions and capacities (ISO 90-1:1986) 16pp
Defines open-top cans and can types, cross-sections, constructions, shapes, special features and capacities. Specifies methods for determining cross-sections and gross lidded capacities and provides tolerances on capacity. This edition, which contains substantial changes in content and presentation from the previous edition, is identical with and has been reproduced from ISO 90-1:1986; additional Australian appendices provide an alternative designation system and a method for determining the height of cans. (PK-008)
Adopts ISO15870:2000 to establish general principles for the design and application of safety signs and hazard pictorials permanently affixed to all types of powered industrial trucks. Also outlines safety sign objectives, describes the basic safety sign formats and colours and provides guidance on developing the various panels that together constitute a safety sign. (ME-026)
15pp
Amendment 1 5 September 1997 Sets out classifications and definitions of different powered industrial trucks; terms and definitions of main components are included. This Standard is identical with and reproduced from ISO 5053:1987. (ME-026)
AS 2359.172008 Stability tests for rough terrain trucks (ISO 8379:1998, MOD) 15pp
Adopts ISO 8379:1998 to specify basic tests to verify the stability of rough terrain lift trucks and rough terrain variable-reach trucks. (ME-026)
AS 2359.81995 Pallet stackers and high-lift platform trucksStability tests (ISO 5766:1990)
8pp
AS 2359.182008 Stability tests for industrial variable-reach trucks (ISO 13562-1:2000) 11pp
Adopts ISO 13562-1:2000 to specify basic tests to verify the stability of industrial variable-reach fork-lift trucks. (ME-026)
AS 23551990 Open top metal cansCapacities and related dimensionsRound cans for food and drink (ISO 3004) 5pp
Amendment 1 10 December 1990 Sets out a range of gross lidded capacities, dimensions and heights for round open top metal cans for use in packaging of food and drinks. (PK-008)
Specifies the basic tests for verification of the stability of trucks and stackers with tiltable and non-tiltable masts, platforms or fork arms. This Standard is identical with and reproduced from ISO 5766:1990. (ME-026)
AS 2359.192008 Additional stability tests for industrial variable-reach trucks handling freight containers of length 6 m and above (ISO 13562-2:2001) 13pp
Adopts ISO 13562-2:2001 to specify additional tests to those specified in AS 2359.18 to verify the stability of industrial variable-reach fork-lift trucks handling empty or laden freight containers of length 6 m and above, swap bodies or semi-trailers. (ME-026)
25pp
Amendment 1 11 July 1994 Specifies performance requirements for organic-based adhesives, cement-based adhesives and cement-based tile fixing mortars containing organic additives and used as adhesives for the installation of ceramic wall and floor tiles and mosaics. Does not apply to specialized installations such as swimming pools, hot wall service conditions, industrial and institutional installations and cold wall service conditions. Appendices include methods for determining bond strength in shear of the adhesive at room temperature after air drying and after cyclic water immersion, bond strength in tension after drying, cyclic accelerating ageing and resistance to fungal growth. (BD-044)
AS 2359.101995 Fork-lift trucksHook-on type fork arms Vocabulary (ISO 2331:1974) 4pp
Specifies the terms relating to hook-on type fork arms for fork-lift trucks. This Standard is identical with and reproduced from ISO 2331:1974. (ME-026)
AS 2360 Measurement of fluid flow in closed conduits AS 2360.01993 Vocabulary and symbols (ISO 4006:1991)
37pp
AS 2359.111995 Fork-lift trucksHook-on type fork arms and fork carriersMounting dimensions (ISO 2328:1993) 3pp
Specifies the interchangeability dimensional characteristics of fork carriers and hook-on type fork arms for fork-lift trucks. This Standard is identical with and reproduced from ISO 2328:1993. (ME-026)
Defines the terms and symbols used in the field of measurement of fluid flow in closed conduits. It is identical with and has been reproduced from ISO 4006:1991. (CE-024)
Specifies requirements for the design, manufacture, marking and testing of powered industrial trucks and their attachments. (ME-026)
AS 2360.1.11993 Pressure differential methods Measurement using orifice plates, nozzles or Venturi tubesConduits with diameters from 50 mm to 1200 mm (ISO 5167-1:1991) 61pp
Specifies the geometry and method of use for orifice plates, nozzles and Venturi tubes for the determination of fluid flow rate in a closed conduit running full. Information for the calculating of a flow rate and its associated uncertainty is included. The Standard applies to conduits with diameters within the range 50 mm to 1200 mm inclusive. It is identical with and has been reproduced from ISO 5167-1:1991. (CE-024)
8pp
AS 2359.21985 Operation
32pp
Prescribes requirements for the operation, maintenance, repair and modification of industrial trucks and their attachments as defined by AS 1763. An appendix gives guidance on atmospheric contaminants. (ME-026)
Specifies requirements that can be applied to a vehicle, enabling it to operate safely in areas that may be hazardous because of an explosive gas atmosphere or combustible dusts. (ME-026)
8pp
Adopts ISO6292:1996 to specify performance requirements, test methods, controls, control forces and component strengths for brakes, fitted to powered industrial trucks. Additional safety considerations have been added in an appendix. (ME-026)
AS 2360.1.21993 Pressure differential methods Measurement using orifice plates or nozzlesConduits with diameters less than 50 mm (BS 1042:1.2:1989) 14pp
Specifies the geometry and method of use for conical entrance, quarter circle and eccentric orifice plates. The Standard applies to conduits with diameter less than 50 mm. It is identical with and has been reproduced from BS 1042: Section 1.2:1989. (CE-024)
AS 2359.41995 Reach and straddle fork-lift trucks Stability tests (ISO 3184:1974)
7pp
Specifies the tests for verification of stability of reach and straddle fork-lift trucks. This Standard is technically equivalent with and has been reproduced from ISO 3184:1974. (ME-026)
AS 2359.52005 Symbols for operator controls and other displays (ISO 3287:1999) 45pp
Establishes symbols for use on operator controls and other displays on powered industrial trucks. (ME-026)
AS 2359.152005 Fork-arm extensions and telescopic fork armsTechnical characteristics and strength requirements (ISO 13284:2003) 8pp
Specifies technical characteristics and strength requirements for fork-arm extensions and telescopic fork arms for fork-lift trucks. (ME-026)
AS 2360.1.31993 Pressure differential methods Measurement using orifice plates, nozzles or Venturi tubesGuide to the use of methods specified in Parts 1.1 and 1.2 (BS 1042:1.4:1992) 34pp
Provides sample calculations, physical data and other additional information for using the pressure differential methods specified in Parts 1.1 and 1.2. It is identical with and has been reproduced from BS 1042:Section 1.4:1992. (CE-024)
81
AS 2360.1.41993
AS 2360.1.41993 Pressure differential methods Measurement using orifice plates, nozzles or Venturi tubesGuide to the effect of departure from the conditions specified in Part 1.1 (BS 1042:1.5:1987) 23pp
Provides guidance to assist in estimating the flow rate when using pressure differential devices constructed or operated outside the scope of Part 1.1. The information given permits users who may not be able to comply fully with the requirements to assess, however roughly, the magnitude and direction of the resulting errors. It is identical with and has been reproduced from BS 1042:Section 1.5:1987. (CE-024)
3pp
Sets out the test method for evaluating the effects of impact on actuating device operation. (FP-002)
5pp
AS 2362 Fire detection, warning, control and intercom systemsMethods of test AS 2362.12002 Heat sensitivity testing of types A, B, C and D heat detectors 6pp
Sets out the method for determining the alarm state temperature and actual time of activation for Type A, B, C and D heat detectors. (FP-002)
Specifies revisions to the test method to encompass the testing of smoke detectors and smoke alarms mounted on vertical surfaces. (FP-002)
1p
Sets out the method for evaluating the effects of air velocity on the stability of an actuating device. (FP-002)
AS 2360.1.52001 Pressure differential methods Measurement using orifice plates, nozzles or Venturi metersPulsating flow, in particular sinusoidal or square wave intermittent periodic-type fluctuations (ISO/TR 3313:1998) 40pp
Defines pulsating flow, compares it with steady flow, indicates how it can be detected, and describes the effects it has on orifice plates, nozzles or Venturi tubes, turbine and vortex flowmeters when these devices are being used to measure fluid flow in a pipe. (CE-024)
2pp
Sets out the test method for evaluating the effects of dust on actuating device operation. (FP-002)
1p
Sets out the method for testing the resistance to overload of actuating devices. (FP-002)
1p
1p
21pp
Specifies a method for the determination of fluid flow, in a conduit running full, by measurement of the mass of water delivered into a weighing tank in a known time interval. The application is generally for fixed laboratory installations with flow rates of less than 1500 kL/s. It is identical with and has been reproduced from ISO 4185:1980. (CE-024)
Sets out the methods of testing the response of an actuating device to repeated use, and the robustness of any manual switches fitted to it. (FP-002)
1p
Specifies the voltage stability test required to test the performance of electrically operated smoke alarms, containing both detection and alarm facilities. (FP-002)
4pp
Sets out the method of determining the sound pressure level emitted from an actuating device in the alarm state. (FP-002)
1p
1p
21pp
Specifies a method for the determination of water flow, in a conduit running full, by measurement of the volume of water delivered into a volumetric tank in a known time interval. The application is generally for fixed laboratory installations with flow rates of less than 1500 kL/s. It is identical with and has been reproduced from ISO 8316:1987. (CE-024)
2pp
3pp
Specifies the static discharge required to test the performance of electrically operated smoke alarms, containing both detection and alarm facilities. (FP-002)
Sets out the methods for evaluating the reliability of actuation for the frangible element of actuating devices. (FP-002)
AS 2360.7.12001 Assessment of uncertainty in the calibration and use of flow measurement devicesLinear calibration relationships (ISO/TR 7066-1:1997) 28pp
Describes the procedures to be used in deriving the calibration curve for any method of measuring flowrate in closed conduits or open channels, and of assessing the uncertainty associated with such calibrations. (CE-024)
4pp
3pp
Sets out a method for evaluating the visibility of alarm indicators on actuating devices. (FP-002)
1p
3pp
AS 2360.7.21993 Assessment of uncertainty in the calibration and use of flow measurement devicesNon-linear calibration relationships (ISO 7066-2:1988) 28pp
Deals with procedures for fitting a quadratic, cube or higher degree (integer powers) polynomial expressions to a non-linear (or linear) set of calibration data using the least-squares criterion and assessment of the uncertainty associated with the resulting calibration curve. Because it is generally not practical to carry out this assessment without using a computer with standard routines an alternative FORTRAN program listing is included as an Annex. It is identical with and has been reproduced from ISO 7066-2:1988. (CE-024)
3pp
2pp
Sets out the method for testing the stability of an actuating device under low temperature conditions. (FP-002)
Specifies the method of test for actuating devices to establish that they will not enter an alarm state when exposed to specified concentrations of nominated substances other than CO. (FP-002)
2pp
Sets out the method for testing the stability of an actuating device under damp heat conditions. (FP-002)
2pp
AS 2360.8.12007 Measurement of free surface flow in closed conduitsMethods (ISO/TR 9824:2007) 31pp
Provides a synopsis of the methods of flow gauging that can be deployed in closed conduits flowing part full, i.e. with a free open water surface. Also provides a brief description of each method with particular reference to other International Standards where appropriate, the attributes and limitations of each technique, possible levels of uncertainty in the flow determinations and specific equipment requirements. (CE-024)
Sets out the method for testing the stability of an actuating device under dry heat conditions. (FP-002)
2pp
AS 2365 Methods for the sampling and analysis of indoor air AS 2365.1.11990 Determination of nitrogen dioxide Spectrophotometric methodTreated mesh/passive tube sampling procedures 5pp
Sets out a spectrophotometric method for the determination of nitrogen dioxide in indoor air using a passive tube technique. This method is applicable to indoor air in which the expected nitrogen dioxide concentration is within the range 0 to 30 ppm by volume (0 to
Sets out the method for subjecting an actuating device to a corrosive atmosphere. (FP-002)
1p
2pp
Sets out the method for subjecting an actuating device to vibration. (FP-002)
82
AS 2365.1.21990 Determination of nitrogen dioxide Spectrophotometric methodTreated filter/passive badge sampling procedures 6pp
Sets out a spectrophotometric method for the determination of nitrogen dioxide in indoor air using a passive sampling treated filter technique. This method is applicable to indoor air in which the expected nitrogen dioxide concentration is within the range 0 to 3 ppm (V/V) (0 to 6000 g/m3) for an exposure time of 1 h, and has a detection limit of 0.35 ppm for a 2 h sampling period. (EV-007)
AS 2369 Materials for solar collectors for swimming pool heating AS 2369.11990 Rubber materials 4pp
AS 2374.3.11992 Insulation levels and dielectric tests External clearances in air (IEC 60076-3-1 Ed. 1.0 (Bilingual 1987)) 13pp
Sets out minimum clearances in air between live parts of bushings on oil-immersed power transformers and objects at earth potential. The text has been reproduced from IEC 76-3-1:1987 and the tabulated minimum clearances have been modified. (EL-008)
Specifies requirements for rubber materials suitable for use in unglazed collectors intended for solar heating of swimming pools. Covers physical and chemical requirements, and resistance to ultraviolet radiation. (CS-028)
AS 2374.51982 Ability to withstand short-circuit (IEC 60076-5 Ed. 1.0 (Bilingual 1976)) 10pp
Specifies the design of power transformers as defined in AS 2374.1, and the requirements necessary both in regard to their ability to withstand short-circuit and the means of demonstrating that ability. Based on IEC 765. (EL-008)
4pp
Sets out a method for the determination of carbon monoxide in indoor air at concentrations between 1 ppm and 500 ppm by volume using a direct-reading portable instrument. (EV-007)
AS 23711994 AlcoholometersGlass
129pp
AS 2374.61994 Determination of transformer and reactor sound levels (IEC 60551 Ed. 2.0 (Bilingual 1987)) 22pp
Amendment 1 26 June 2000 Defines sound power versus sound pressure and sets out the methods by which the sound power levels of transformers, reactors, and their associated cooling equipment shall be determined. Standard and reduced sound power level limits for transformers only have been added in an Australian Appendix. Technically equivalent to IEC 551:1987, with the addition of Appendix AA. (EL-008)
19pp
Amendment 1 5 December 1996 Sets out three methods for the determination of the radon content in indoor air. Method A applies to grab samples and requires the collection of a grab sample in a scintillation cell followed by the measurement of its alpha activity. Method B is applicable for short-term sampling periods. The principle consists of adsorption of the radon onto activated charcoal followed by the measurement of the gamma radiation that is emitted. Method C applies to sampling periods of up to a year and employs solid state nuclear track monitoring. (EV-007)
Specifies requirements for alcoholometers for measuring the alcohol content of simple mixtures of alcohol and water. Provides guidance for use of alcoholometers and tables for the estimation of alcohol content. (CH-001)
AS 23721980 Engineers' vertical comparators (analogue type) for external measurementMetric series (ISO 2625-1) 8pp
Relates to comparators with an analogue scale and magnification factors of from 250 up to and including 10 000, and with mechanical, electrical, electronic or pneumatic amplification. General dimensions, design requirements, finish, accuracy, scale markings, material necessary to ensure convenience in use, and repeatability of readings and accuracy requirements are specified. An appendix gives information on calibrating the more important parameters of comparators. (ME-027)
AS 2374.71997 Loading guide for oil-immersed power transformers (IEC 60354 Cor. 1 Ed. 2.0 b (1992), IEC 60354 Ed. 2.0 (Bilingual 1991)) 79pp
Amendment 1 5 June 1998 Provides guidance on determining the acceptable relationship between transformer rating and proposed load cycle when considering the effect of operating temperatures on life expectancy due to insulation deterioration and thermal ageing. Includes recommendations for loading above the nameplate rating and guidance for choosing appropriate rated quantities and loading conditions for new installations. It applies to the same range of transformers complying with AS 2374.1 1997. This Standard is technically equivalent to and reproduced from IEC 354:1991 and includes Australian informative appendices on determination of the thermal time-constant and indirect measurement of winding hot-spot temperature. (EL-008)
AS/NZS 2373:2003 Electric cablesTwisted pair for control and protection circuits 19pp
Specifies the requirements for screened polyethylene (PE) insulated twisted pair control cables for voltages up to 0.6/1 kV, including a support wire for aerial cables, intended for use in control, supervisory, protection and instrumentation circuits. It includes cables commonly referred to as pilot cables but it does not apply to cables used solely for telecommunication purposes. (EL-003)
AS 2374 Power transformers AS 2374.1.22003 Minimum Energy Performance Standard (MEPS) requirements for distribution transformers 16pp
Amendment 1 19 August 2005 Specifies minimum power efficiency levels and high power efficiency levels for oil-immersed and dry-type distribution transformers, with power ratings from 10 kVA to 2500 kVA, intended to be used on 11 kV and 22 kV networks. It is expected that this Standard will be called into legislation by individual States and Territories mandating these requirements under Minimum Energy Performance Standard (MEPS) regulations. (EL-008)
AS 2374.82000 Application guide (IEC 60076-8 Ed. 1.0 (Bilingual 1997)) 77pp
Provides a guide for the application, calculations and measurements of conventional design and loaded three-phase and single-phase power transformers (including auto-transformers). Certain categories of small and special transformers are not covered. Recommendations are not mandatory and do not in themselves constitute specification requirements. (EL-008)
Specifies requirements for repair of damage to laminated safety glass windscreens for road vehicles. Prepared to assist windscreen repairers in their decision to repair a damaged laminated windscreen. It nominates the correct procedures and specifies limits for a successful repair. It is not intended that it be applied to determine the roadworthiness of a motor vehicle although repairing to the Standard might extend the life of a damaged windscreen. (ME-055)
13pp
AS 2374.21997 Temperature rise (IEC 60076-2 Ed. 2.0 (Bilingual 1993)) 26pp
Specifies temperature-rise limits and methods of test for measuring temperature rise. Based on but not equivalent to, and has been reproduced from IEC 762:1993. Includes Australian variations. (EL-008)
Specifies performance requirements to verify the suitability of windscreen repair systems and application windscreen repair materials, to ensure satisfactory repairs to damaged windscreens. (ME-055)
10pp
Specifies requirements for Gay-Lussac type density bottles suitable for the determination of liquids. (CH-001)
4pp
Specifies characteristics of the oil obtained from Australian-grown oranges and includes an analytical method for the determination of the aldehyde content of the oil. (CH-021)
AS 2374.3.01982 Insulation levels and dielectric tests General requirements (IEC 60076-3 Ed. 1.0 (Bilingual 1980)) 22pp
Amendment 1 1 September 1992 Specifies the insulation levels and dielectric tests for power transformers as defined in AS 2374.1. Based on IEC 76-3. (EL-008)
AS 2380 Electrical equipment for explosive atmospheresExplosion-protection techniques AS 2380.11989 General requirements (IEC 60079-0 Ed. 2.0 (1983))
18pp
36pp
Relates to factors which need to be considered and the measurements which need to be made when designing and
Amendment 1 5 September 1998 Prescribes general requirements for the construction, marking and testing of electrical equipment intended for use in explosive atmospheres and is supplemented by other parts covering specific types of protection. This Standard is similar to IEC 79-0. (EL-014)
83
AS 2380.41994
AS 2380.41994 Pressurized rooms or pressurized enclosures (IEC/TR 60079-13 Ed. 1.0 (Bilingual 1982), IEC/TR 60079-2 Ed. 3.0 (Bilingual 1983)) 27pp
Specifies requirements for the design, construction and testing of rooms and enclosures of electrical equipment in which the entry of flammable gas or vapour is prevented by maintaining the air (or other nonflammable gas) within the room or enclosure at a specified pressure above that of the external atmosphere. Requirements for the use of pressurized rooms and enclosures in Class II, combustible dust areas are also included. (EL-014) quirements, and an appendix illustrates typical sets of mounted roughness comparison specimens. (ME-027)
33pp
2pp
Sets out a titrimetric method for the determination of calcium in waters. This method is identical to AS 2383 (1980) of the same title. However, it incorporates some editorial corrections and precision data gained from a round robin test program. (EV-008)
Provides general guidance on the selection and use of different paper and paperboard products describing wrapping papers, paper bags, multiwall paper sacks, paperboard boxes, fibreboard boxes, moulded pulp and composite cans and drums. (PK-025)
22pp
AS/NZS 2381 Set:2008 Electrical equipment for explosive gas atmospheresSelection, installation and maintenance Set 147pp AS/NZS 2381 Electrical equipment for explosive gas atmospheresSelection, installation and maintenance AS/NZS 2381.1:2005 General requirements 79pp
AS 23851990 Single-use (sterile) infusion sets for general medical use 28pp Available Superseded
Amendment 1 17 May 1993 Specifies requirements for single-use sterile intravenous infusion sets for general medical use. It covers sets suitable for blood, blood derivatives and other intravenous fluids in general, and also sets suitable only for use with fluids containing no solid phase. Does not apply to certain types of sets for paediatric use or other sets such as microdip sets, pump sets and sets fitted with a central venous pressure monitoring device. Appendices include test methods for the determination of the physical, chemical and biological requirements of the infusion set. (HE-021)
Provides general guidance on construction of timber boxes, including recommendations for the selection of materials suitable for the required performance. (PK-025)
3pp
Provides information to assist packers in the selection, filling, handling and storage of textile bags, sacks and wrappings. (PK-025)
Amendment 1 26 September 2005 Amendment 2 19 December 2006 Amendment 3 31 October 2007 Specifies general requirements for the selection, installation and maintenance of electrical equipment for use in areas were flammable materials are generated, prepared, processed, handled, stored or otherwise used, and which are therefore potentially hazardous. (EL-014)
AS 2400.111988 Cordage
2pp
Provides guidance on the choice and use of twines and cords in securing packages or the top layer of unit loads. (PK-025)
18pp
86pp
AS/NZS 2394:1994 Conditioning equipment for the treatment of nocturnal enuresis (bedwetting) 5pp
Specifies requirements for the performance and safety of equipment for use in the conditioning treatment of nocturnal enuresis (bedwetting). It applies to both batterypowered and mains-powered equipment. This edition references AS 3200.1.01990. It has been re-written to clarify the issue of resetting equipment. (HE-003)
Amendment 1 3 March 2003 Specifies general requirements for the selection, installation and maintenance of electrical equipment for use in areas where flammable materials are generated, prepared, processed, handled, stored or otherwise used, and which are therefore potentially hazardous. (EL-014)
Amendment 1 5 May 1986 Provides guidance on the selection and use of metallic and non-metallic tensional strapping. The term metallic strapping covers flat band strapping and wire of round, oval or flat section. Non-metallic strapping covers weftless tapes and extruded thermoplastic tapes. (PK-025)
AS 2400.141985 Adhesives
9pp
18pp
AS 23971993 Safe use of lasers in the building and construction industry 16pp
Sets out safety requirements for the use of lasers in the building and construction industry. Provision has been made for the use of Class 3B (Restricted) lasers where the level of illumination is appropriate. It is intended for use as a reference by persons concerned with the use of lasers for alignment, levelling, control and survey tasks in the building and construction industry, and supplements the requirements of AS 2211 relevant to work in that industry. It does not cover the design and manufacture of lasers, nor the use of lasers in other applications. (SF-019)
Provides guidance on the adhesives used in the manufacture of packaging materials and for assembling and sealing packages, or securing of unit loads. (PK-025)
Amendment 1 6 September 2006 Specifies requirements for the selection, installation and maintenance of electrical equipment, for use in explosive atmospheres, which have been certified in accordance with the requirements of type of explosion protection d. It does not apply to electrical equipment used in underground mining. (EL-014)
20pp
Provides general description of, and provides information on, nomenclature, availability, properties, enduses and some methods of test for flexible packaging, e.g. regenerated cellulose film, plastics films and aluminium foil, and gives general guidance on the use of these materials in laminates. (PK-025)
15pp
9pp
Amendment 1 5 May 1995 Specifies requirements for the selection, installation and maintenance of electrical equipment, for use in explosive atmospheres, which have been certified or assessed in accordance with the requirements of type of protection 'd'. It does not apply to electrical equipment used in underground mining. (EL-014)
AS/NZS 2399:1998 AcousticsSpecifications for personal sound exposure meters (IEC 61252 Ed. 1.0 (Bilingual 1993)) 19pp
Specifies acoustical and electrical performance requirements for personal sound exposure meters. Specifications are applicable to instruments intended to be worn on a person for measurement of A-weighted sound exposure resulting from steady, intermittent, fluctuating, irregular or impulsive sounds. This Standard is technically equivalent to, and has been reproduced from, IEC 1252:1993. (AV-002)
Provides guidance on the use of desiccants in packaging to reduce humidity inside packages. Examples of calculation of quantity of desiccant required as well as notes on permeability and water-vapour transmission rate are given in appendices. (PK-025)
AS 2400.222005 Closures
11pp
29pp
Specifies requirements for the selection, installation and maintenance of electrical equipment, for use in explosive atmospheres, which have been certified or assessed in accordance with the requirements of type of protection 'e'. It does not apply to electrical equipment used in underground mining. (EL-014)
Specifies the use of closures for various types of containers made of different materials such as bottles, cans, jars and tubes, generally less than 5L capacity. It applies to closures such as bungs, lids, plugs, seals, strives and stoppers but excludes seamed ends and lever lids on metal cans. (PK-025)
AS 2401 Battery chargers for lead-acid batteries Domestic type AS 2401.11994 Battery chargers for vented cells 9pp
21pp
Sets out requirements for the selection, installation and maintenance of intrinsically safe electrical equipment and systems. (EL-014)
Gives an alphabetical list of terms and their definitions as used in the packaging industry and includes an index of non-preferred terms with cross-references to the associated preferred terms. Appendices include explanatory diagrams, and a list of commonly-used acronyms. (PK-025)
Specifies requirements for material, design, testing and performance of battery chargers intended for domestic use and for charging vented lead-acid batteries of the automotive type. (EL-005)
11pp
Specifies the selection and use of temporary corrosion preventatives for protecting metal surfaces during transport and storage. (PK-025)
84
7pp
are covered. The Standard provides for the optional application of organic coatings, such as paints and plastics, on the metallic coated wire and wire products. (MT-001)
Sets out the essential geometric requirements for interchangeability in relation to a series of 10 spherical ground glass joints for incorporation in laboratory glassware. (CH-001)
AS 24111993 Venous bloodDetermination of lead content Flame atomic absorption spectrometric method 9pp
Sets out a flame atomic absorption spectrometric method for the determination of lead in venous blood after extraction into n-butyl acetate. The method is applicable to the determination of lead in whole blood in the range of 1.0 mol/L to 60 mol/L. (CH-036)
AS 24241991 Plastics building sheetsGeneral installation requirements and design of roofing systems 11pp Available Superseded
Establishes procedures for the installation of plastics building sheets for walls and roofs and for the design of plastics roofing systems. (PL-022)
11pp
Specifies requirements for buoyancy-driven smoke and heat exhaust vents that are intended to be mounted in roofs of buildings to release the products of combustion in the event of fire. (ME-062)
AS 2402.2.12005 Valve-regulated cellsRequirements (IEC 60254-1 Ed. 3.0 (Bilingual 1997), IEC 60254-2 Ed. 3.1 (Bilingual 2000)) 24pp
Provides requirements for lead-acid batteries of the valve-regulated type intended for installation in electric traction vehicles such as forklift trucks. It includes requirements for traction cells used in engine starting applications, e.g. starting of emergency diesel generators. It includes tests to verify performance requirements. (EL-005)
AS 2428 Methods of testing smoke/heat release vents AS 2428.12004 Determination of resistance to leakage during rain 5pp
Sets out the method for determining the resistance of a smoke/heat release vent leakage during rain. (ME-062)
AS 24172001 Rotodynamic pumpsHydraulic performance acceptance testsGrades 1 and 2 (ISO 9906:1999) 61pp
Specifies hydraulic performance tests for acceptance of rotodynamic pumps (centrifugal, mixed flow and axial pumps). It is applicable to pumps of any size and to any pumped liquids behaving as clean cold water. This Standard contains two grades of accuracy of measurement grade 1 and grade 2. This Standard is idential with and has been reproduced from ISO 9906:1999. (ME-030)
177pp
8pp
Specifies a method for determining the plastic ratio of flat products (sheet and strip) made of metallic materials. (MT-006)
Sets out definitions for terms used in relation to coal and coke. Fields covered are analysis and testing, classification, flow properties, coal preparation, mining and geology, petrography, sampling and utilization. (MN-001)
AS 24041980 Textile floor coveringsFire propagation of the use-surface using a small ignition source 4pp
States the level of fire propagation acceptable for the usesurface of any textile floor covering when ignited using a small ignition source. The methenamine tablet used for the test is specified in AS 2111.18. (CS-086)
AS 2419 Fire hydrant installations AS 2419.12005 System design, installation and commissioning 82pp
Amendment 1 8 June 2007 Specifies requirements for the design, installation and commissioning of fire hydrants. (FP-009)
7pp
Sets out the requirements for Kjeldahl flasks used for digestion and distillation procedures. (CH-001)
AS 24062006 Laboratory glasswareGlass condensers with interchangeable ground glass joints 13pp
Sets out requirements for a series of typical glass condensers with interchangeable ground glass joints suitable for general laboratory use. (CH-001)
AS 24072005 Laboratory glasswareSeparating funnels and dropping funnels (ISO 4800:1998) 7pp
Describes details of an internationally acceptable series of glass separating funnels and dropping funnels suitable for general use in laboratories. (CH-001)
16pp
Amendment 1 5 October 1996 Specifies requirements for the design, construction, performance, and testing of valves suitable for installations as fire hydrant valves. (FP-009)
10pp
AS 2430 Classification of hazardous areas AS 2430.11987 Explosive gas atmospheres Available Superseded 12pp
6pp
Specifies requirements for design, construction, performance and testing of fire brigade inlet booster connections suitable for use as part of fire hydrant systems. (FP-009)
30pp
Sets out a comprehensive list of terms used in the field of micrographics with an explanation of each term. Terms found in ordinary dictionaries are not included. (MS-004)
AS 24232002 Coated steel wire fencing products for terrestrial, aquatic and general use 82pp
Specifies requirements and sets out options, for zinc or zinc/aluminium-alloy coated steel wire and wire products for a broad range of fences, trellises, enclosures and the like. Terrestrial, aquatic (notably marine) and general uses
Provides a classification of areas according to the likely existence of an explosive gas/air mixture, including areas in which the mixture is continuously present or present for long periods (Zone 0), areas in which the mixture is likely to occur in normal operation (Zone 1), and areas in which the mixture is not likely to occur or will exist for only a short time (Zone 2). Basic principles involved in classification are given and the factors to be considered in determining the type and extent of zones are described. Similar to IEC 79-10 in terminology, definitions and general treatment of the subject. (MS-011)
85
AS 2430.31991
AS 2430.31991 Specific occupancies (IEC 60079-10 Ed. 2.0 (1986)) Available Superseded
and sale of surface coatings and adhesives (classified as manufactured produced and as flammable material in the ADG Code and in the Dangerous Goods Regulations 1985 New Zealand). It includes specific examples of classification for such areas. To be read in conjunction with AS/NZS2430.3.1. (MS-011)
36pp
Provides guidance on the classification of several commonly occurring situations in which flammable liquids or gases are generated, processed, handled or stored and which are therefore potentially hazardous. (MS-011)
17pp
Specifies guidance on the classification of areas associated with several finishing processes, fruit ripening rooms, several batch-type processes and ammonia systems. It includes specific examples of classification for the aforementioned areas. To be read in conjunction with AS/NZS2430.1. (MS-011)
7pp
Specifies requirements for elastomeric hose intended for use as brake pipe coupling hoses in railway compressed air braking systems, suitable for a maximum working pressure of 1.0 MPa within an ambient temperature range of -10C to 65C. (RU-001)
23pp
AS/NZS 2430.3.2:2004 Examples of area classificationVehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangars 28pp
Specifies guidance on the classification of areas associated with vehicle workshops, vehicle parking areas, fuel dispensing stations and aircraft hangars. It includes specific examples of classification for the aforementioned areas as well as for residential garages and pollution control equipment. To be read in conjunction with AS/NZS2430.3.1. (MS-011)
Specifies safety requirements relating to the materials, design, construction and performance, together with recommendations for the use and hygienic care of babies' dummies, all of which are important for the health and wellbeing of a baby. (CS-040)
AS 24361981 Guide to noise control on construction, maintenance and demolition sites (ISO 1996) 30pp
Provides guidance in noise control in respect of engineering construction, maintenance and demolition works. It covers hearing protection of persons on site, investigation and identification of noise sources, neighbourhood nuisance, measurement of sound and its assessment and control of noise at source and its spread. Appendices provide information on statutory requirements estimation of noise from sites (with examples). A-weighted levels of neighbourhood noise, sound levels from construction, maintenance and demolition plant, remedies and their effectiveness according to machine and source of noise, and use of acoustic screens and enclosures. (AV-006)
AS 2434 Methods for the analysis and testing of lower rank coal and its chars AS 2434.11999 Determination of the total moisture content of lower rank coal 10pp
Sets out three methods for the determination of the total moisture content of lower rank coal. (MN-001)
15pp
Amendment 1 10 August 2007 Provides examples of area classification for areas associated with the production, processing, handling, transferring and storage of flammable liquids. (MS-011)
16pp
Amendment 1 16 March 2007 Specifies guidance on the classification of areas associated with the production, processing, handling and storage of flammable liquids and gases, in refineries and major processing plants. It includes specific examples of classification for such areas, based on a generalized method area classification. To be read in conjunction with AS/NZS2430.3.1 (MS-011)
AS/NZS 2438 Drills and reamers AS/NZS 2438.1:1994 Specification for twist drills (BS 328.1:1993, ISO 235:1980, ISO 3291:1975, ISO 3292:1975, ISO 494:1975) 34pp
Amendment 1 5 January 1996 Amendment 2 5 April 1996 Specifies dimensions and tolerances for parallel shank, jobber, stub, long and extra long series of twist drills, and for Morse taper shank and Morse taper shank extra long drills. Tables summarize both imperial and metric sizes for each type of drill. Identical with and reproduced from BS 328.1:1993. (ME-010)
AS/NZS 2430.3.5:2004 Examples of area classification Refineries and major processing plants 8pp
Provides examples of area classification for areas associated with the production, processing, handling and storage of flammable liquids and gases in refineries and major processing plants. (MS-011)
AS 2434.42002 Dried lower rank coal and its chars Determination of apparent density Mercury displacement method
5pp
Specifies a method for the determination of the apparent density of dried lower rank coal and its chars by mercury displacement. (MN-001)
AS/NZS 2430.3.6:2004 Examples of area classification Laboratories, including fume cupboards and flammable medical agents 6pp
Amendment 1 16 March 2007 Specifies guidance on the classification of areas associated with laboratories, fume cupboards and the use of flammable medical agents. It includes specified examples of classification for such areas. To be read in conjunction with AS/NZS2430.3.1. (MS-011)
AS 2434.52002 Lower rank coal and its chars Determination of moisture in bulk samples of lower rank coal and in analysis samples of char 8pp
Specifies procedures for the determination of the moisture content of bulk samples and analysis samples of char from lower rank coal. (MN-001)
AS 2439 Perforated plastics drainage and effluent pipe and fittings AS 2439.12007 Perforated drainage pipe and associated fittings 26pp
Specifies requirements for perforated plastics pipe and associated fittings designed for use in the drainage of surface and subsurface land, highway and building construction sites. (PL-021)
AS/NZS 2430.3.7:2004 Examples of area classificationLandfill gas, sewage treatment and sewage pumping plants 9pp
Specifies guidance on the classification of areas associated with gas recovery, sewage treatment plants and sewage pumping plants. It includes specific examples of classification for areas basically related with methane occurrences. The examples provided can be extended to coal seam gas recovery and biodigestion of farm wastes. To be read in conjunction with AS/NZS2430.3.1. (MS-011)
AS 2439.22007 Perforated effluent pipe and associated fittings for sewerage applications 23pp
Specifies requirements for perforated plastics effluent pipe and associated fittings intended for effluent discharge. (PL-021)
11pp
Specifies requirements for distribution, location and installation of fire hose reels. (FP-007)
86
AS/NZS 2450:1994 TextilesNatural and man-made fibres Generic names (ISO 2076:1989)
84pp
4pp
Specifies lists and defines natural and man-made fibres. This Standard is based on ISO 2076:1989. (CS-004)
This Standard sets out recommendations and procedures for the maintenance of electrical switchgear. It is applicable to electrical switchgear having rated voltages not greater than 145 V. (EL-007)
AS/NZS 2451:1998 Bolts, screws and nuts with British Standard Whitworth threads (rationalized series) 22pp
Specifies the dimensions for bolts and screws with British Standard Whitworth threads in diameters from in to 6 in, and the material requirements for steel bolts, screws and nuts for general use. (ME-029)
15pp
AS/NZS 2442.1 Supplement 3:1996 Energy consumption and performance Test materialPillow case (Supplement to AS/NZS 2442.1:1996)
Comprises a pillow case which is suitable for inclusion in the standard test load required when testing clothes dryers to AS/NZS 2442.1, or clothes washers to AS/NZS 2040.1. Intended for sale to relevant manufacturers and other accredited test laboratories only. (EL-015)
AS 2452 Non-destructive testingDetermination of thickness AS 2452.12004 Determination of wall thickness of pipe by the use of radiography 15pp
Specifies the methods for the determination of the wall thicknesses of pipes and small fabricated vessels using X-ray or gamma-ray radiography. (MT-007)
Specifies requirements for brazed steel cylinders with no longitudinal joint and not more than two circumferential joints, of water capacity not less than 0.1 kg nor more than 11 kg, which have test pressures from 1750 kPa to 7000 kPa and are intended for the storage and transport of compressed gases in accordance with AS 2030.1. (ME-002)
AS 24692005 Steel cylinders for compressed gases Welded two-piece construction0.1kg to 150kg 26pp
Specifies requirements for welded carbon and stainless steel cylinders with no longitudinal joint and one circumferential joint, of water capacity not less than 0.1 kg nor more than 150 kg, which have test pressures from 1750 kPa to 7000 kPa and are intended for the storage and transport of compressed gases in accordance with AS 2030.1. (ME-002)
AS/NZS 2442.1 Supplement 4:1996 Energy consumption and performance Test materialBath towel (Supplement to AS/NZS 2442.1:1996)
Comprises a bath towel which is suitable for inclusion in the standard test load required when testing clothes dryers to AS/NZS 2442.1, or clothes washers to AS/NZS 2040.1. Intended for sale to relevant manufacturers and other accredited test laboratories only. (EL-015)
16pp
Specifies six methods for the determination of thickness of material based on the use of ultrasonic pulseecho principles where scanning and reflecting surfaces are substantially parallel. (MT-007)
AS/NZS 2442.1 Supplement 6:1998 Energy consumption and performance Test materialDouble bed sheet (Supplement to AS/NZS 2442.1:1996)
Comprises a double bed sheet which is suitable for inclusion in the standard test load required when testing clothes dryers to AS/NZS 2442.1, or clothes washers to AS/NZS 2040.1. Intended for sale to relevant manufacturers and other accredited test laboratories only. (EL-015)
AS 24702005 Steel cylinders for compressed gases Welded three-piece construction with longitudinal joint11kg to 150kg 27pp
Specifies requirements for welded carbon and stainless steel cylinders with one longitudinal and two circumferential joints, of water capacity not less than 11 kg nor more than 150 kg, which have test pressures from 1750 kPa to 7000 kPa, and are intended for the storage and transport of compressed gases in accordance with AS 2030.1. (ME-002)
36pp
AS/NZS 2442.1 Supplement 7:1998 Energy consumption and performance Test materialTable cloth (Supplement to AS/NZS 2442.1:1996)
Comprises a table cloth which is suitable for inclusion in the standard test load required when testing clothes dryers to AS/NZS 2442.1, or clothes washers to AS/NZS 2040.1. Intended for sale to relevant manufacturers and other accredited test laboratories only. (EL-015)
Defines terms relating to textile floor coverings, components, substrates and maintenance. Also defines categories of textile floor coverings according to their structural composition. (TX-009)
31pp
AS/NZS 2455 Textile floor coveringsInstallation practice AS/NZS 2455.1:2007 General 29pp
Specifies inlet and outlet connection threads, material, testing, valve spindle dimensions and operations, and marking requirements, for compressed gas cylinder valves with threaded outlet connections for a nominated range of gases. (ME-002)
AS/NZS 2442.1 Supplement 8:2000 Energy consumption and performance Test materialUndershorts (Supplement to AS/NZS 2442.1:1996)
Comprises undershorts which are suitable for inclusion in the standard test load required when testing clothes dryers to AS/NZS 2442.1 or clothes washers to AS/NZS 2040.1 (EL-015)
Sets out requirements for installing textile floor coverings (carpets). It gives details of the work necessary in preparing subfloor surfaces, together with the procedures that are to be adopted where textile floor coverings are laid over various types of subfloors and underlays, and where subfloor heating units are installed. (TX-009)
AS 2473 Valves for compressed gas cylinders AS 2473.12006 Specifications, type testing, and manufacturing tests and inspections 24pp
Specifies requirements for design, construction and manufacture, type testing and marking for valves intended to be fitted to gas cylinders which convey compressed, liquefied or dissolved gases. (ME-002)
8pp
23pp
Sets out the requirements for the recognized systems for the installation of carpet tiles to be used in conjunction with AS/NZS 2455.1:2007. (TX-009)
Amendment 1 27 September 2006 Amendment 2 30 April 2007 Provides energy labeling requirements for rotary clothes dryers intended for household and similar use. Transitional aspects of regulation are addressed. (EL-015)
AS 24442001 Portable fire extinguishers and fire blankets Selection and location 29pp
Specifies the criteria for the selection of portable fire extinguishers and the requirements for their application, location and distribution. (FP-003)
AS 2473.32007 Outlet connections for medical gases (including pin-indexed yoke connections) (ISO 407:2004) 24pp
Specifies outlet connections for gas cylinders containing medical gases, and specifies certain related design and manufacturing features of the valve. (ME-002)
4pp
AS 24441995 Portable fire extinguishers and fire blankets Selection and location 23pp Available Superseded
Amendment 1 5 October 1996 Amendment 2 5 June 1997 Specifies criteria for the selection of extinguishers based on classification and rating, including requirements for location and distribution of extinguishants based on classification and rating, and the potential hazard classification. This Standard also includes a Section on the selection and loca-
Amendment 1 10 May 1985 Amendment 2 5 December 1986 Specifies essential characteristics of thermal insulation for dwellings and provides for manufacturers to state the thermal resistance of the product. (BD-058)
AS 24741990 Valves for compressed gas cylinders (diameter-indexed outlets) 8pp Obsolescent
Specifies outlet connection dimensions for a system of diameter-indexed connections for a limited range of nominated gases. Does not apply to valves for portable gas cylinders of less than 11 kg water capacity for self-contained breathing apparatus, or to valves for fire extinguishers. (ME-002)
AS/NZS 2465:1999 Unified hexagon bolts, screws and nuts (UNC and UNF threads) 12pp
Amendment 1 5 May 1999 Specifies the dimensions for unified hexagon bolts, screws and nuts (UNC and UNF threads) in diameters from in to 1
87
AS 24752001
AS 24752001 Threaded hose connection fittings for bituminous materials 12pp
Specifies the two sizes of threaded hose connection fittings (50 mm and 63.5 mm) to be used on equipment used for handling bituminous materials. (ME-057)
25pp
4pp
8pp
Sets out general procedures and precautions to be adopted when chemical fumigation for the eradication of pests is being carried out. (CH-005)
Sets out a method for the determination of the acid demand of zircon sand concentrates. (MN-004)
AS 24792007 Down and/or feather filling materials and filled products 11pp
Specifies requirements for purity, composition, classification and labelling of down and/or feather filling material contained in filled products such as comforters, continental quilts, pillows and sleeping bags etc. (CS-035)
AS 24901997 Sampling procedures and charts for inspection by variables for percent nonconforming (ISO 3951:1989) 107pp
Provides sampling plans and procedures for inspection by variables. Three methods of determining acceptability are included viz. the 's' method, the 'o' method and the 'r' method. Appendices cover basic statistical theory, calculation of the estimated standard deviation and the use of the 'r' range method as an alternative to the 's' method. It is identical with and has been reproduced from ISO 3951:1989. (QR-008)
Specifies a method for determining the water absorption of rigid cellular plastics by measuring the change in buoyant force resulting from immersion in distilled water. (PL-016)
AS 24821989 Geographic information systemsGeographic dataInterchange of feature-coded digital mapping data 31pp
Specifies the format and coding of unstructured digital point and vector geographic data to be used when the information is being prepared for exchange purposes. (IT-004)
AS/NZS 2499:2000 AcousticsMeasurements of sound insulation in buildings and of buildings elements Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it (ISO 140-9:1985) 7pp
Provides a laboratory method of measurement the airborne sound insulation of a suspended ceiling with a plenum of defined height mounted above an acoustical barrier which separates two rooms of a specified test facility. This Standard has been adopted with national modifications and reproduced from ISO 140-9:1985. (AV-004)
AS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications 23pp
Specifies requirements for cross-linked polyethylene pipes for the conveyance of fluids under pressure. (PL-006)
AS 24832003 Metal finishingRecommended sampling plans for the inspection and testing of coatings (ISO 4519:1980, MOD) 12pp
Specifies sampling plans and procedures for inspection by attributes of electrodeposited metallic coatings. This Standard is an adoption with national modifications and is reproduced from ISO 4519:1980. (MT-009)
AS/NZS 2496:1995 Breathing attachments for anaesthetic purposes for human use (ISO 5356-1:1987, ISO 5356-2:1987) 30pp
Specifies basic requirements for breathing attachments for anaesthetic apparatus, including the sequence and dimensions of cone and socket joints (conical fittings) of 15 mm, 19 mm, 22 mm, 23 mm and 30 mm sizes, used for adult and paediatric purposes. Dimensions and form of screwthreaded, weight-bearing connections for use with attachments for anaesthetic apparatus and ventilators are also specified. (HE-019)
AS/NZS 2500:2004 Guide to the safe use of electricity in patient care 72pp
Provides a guide to the safe use and application of electricity operated equipment used in health care. In addition to providing protection against electric shock to patients and staff, provision to safeguard against hazards such as thermal, radiant and mechanical, are also included. Measures required to provide and maintain patient and operator safety, including specification of the class of equipment and electrical installation to be employed for particular medical procedures, are also included. (HE-003)
Provides a glossary of terms to be used in connection with fire testing; also refers to deprecated terms which should not be used in connection with fire testing. (FP-018)
AS 2497 Procedures for acceptance testing of refractory products AS 2497.12001 Batch procedure 40pp
AS 2503 Refractories and refractory materials Chemical analysis AS 2503.12006 Silica refractories 26pp
Sets out methods for the sampling, preparation of samples and analysis of silica refractories and refractory materials (MN-007)
Sets out the methodology for the acceptance testing of refractory products based on minimum quality levels associated with an agreed specification. (MN-007)
28pp
AS 2498 Methods of testing rigid cellular plastics AS 2498.01993 General introduction and list of methods 1p
Specifies test methods for rigid cellular plastics. (PL-016)
Sets out methods for the sampling, preparation of sample and analysis of aluminosilicate refractories and refractory materials. (MN-007)
AS/NZS 2485:1995 Medical equipmentSingle-use winged intravenous devices (sterile) for general medical use 39pp
Specifies requirements for sterilized winged devices, generally known as 'scalp vein units', for intravenous use. Appendices include methods of test for biological, chemical and physical requirements. (HE-009)
24pp
Sets out methods for the samplings preparation of sample and analysis of high alumina refractories and high alumina refractory materials. (MN-007)
1p
35pp
16pp
Specifies requireements for dry heat sterilizers of the hot air type intended for use in hospitals, hospital laboratories, office-based health care facilities and similar situations for the sterilization of instruments, metalware, glassware and oils. It does not apply to machines that sterilize fluids in nonvented bottles or liquids, oils and greases that have a boiling point less than the selected sterilizing temperature. (ME-003)
Sets out methods for the sampling, preparation of samples and analysis of dolomite and magnesite refractories and refractory materials (MN-007)
4pp
35pp
Sets out methods for the sampling, sample preparation, and analysis of chrome-bearing materials. (MN-007)
AS 24881995 Resuscitators intended for use with humans (ISO 8382:1988) 33pp
Amendment 1 5 January 1996 Specifies performance and safety requirements for ventilatory resuscitators intended for use with humans of all age groups. Automatic pressure cycled gas-powered resuscitators, electrically-powered resuscitators, devices which are designed only to deliver gases to a patient breathing adequately, and devices intended to assist or provide ventilation to a patient for an extended period of time are not covered. The Clauses of this Standard supplement or modify the corresponding Clauses in ISO 8382:1988. (HE-018)
AS 2503.62007 Refractories, refractory mortars and silicate materialsDetermination of major and minor elementsWavelength dispersive X-ray fluorescence spectrometry using lithium borate fusion 19pp
Specifies a wavelength dispersive X-ray fluorescence spectrometric method using lithium borate fusion to determine major and minor elements in refractories, cements and silicate materials. (MN-007)
AS 2505 Metallic materials AS 2505.12004 Sheet, strip and plateBend tests 11pp
Specifies methods for single and reverse bend testing of coated and uncoated metal sheet, strip and plate. (MT-006)
88
AS/NZS 2512.2:2006 General requirements for the conditioning and preparation of test specimens and laboratory conditions 3pp
Sets out the conditioning procedures for helmets that are to be tested, the ways in helmets are prepared for testing, and the conditions for testing. protective which the laboratory (CS-097)
and heavy duty for a given range of nominal pipe sizes are tabulated. (WS-009)
AS 25191993 Guide to the technical evaluation of higher rank coal deposits 116pp
Sets out recommended practices for the technical evaluation of a higher rank coal deposit, principally using borehole techniques. (MN-001)
11pp
5pp
Specifies a method for determining the ability of metallic wire of diameter or thickness 0.3 to 10 mm inclusive to undergo plastic deformation during reverse bending. This Standard is identical with and has been reproduced from ISO 7801:1984. (MT-006)
Amendment 1 6 January 1984 Gives instructions on the use of petroleum measurement tables called up by reference to provide data for the calculation of petroleum quantities in both commercial transactions and engineering procedures. The referenced tables were developed by the American Petroleum Institute, the American Society for Testing and Materials and the Institute of Petroleum. Based on ISO 91:1981 with the addition of parts of tables from ASTM/IP Petroleum Measurement Tables, 1952 edition. (ME-038)
2pp
16pp
Specifies a method for determining the ability of metallic wire of diameter or thickness 0.1 to 10 mm inclusive to undergo plastic deformation during simple torsion in one direction. This Standard is identical with and has been reproduced from ISO 7800:1984. (MT-006)
Specifies the basic requirements for steel cylinders of 5 kg to 160 kg water capacity intended for the storage and transport of acetylene. Also specifies requirements for the porous filler, the solvent and the cylinder marking. (ME-002)
1p
Specifies a method for determining the ability of metallic wire of diameter or thickness 1.0 to 10 mm inclusive to undergo plastic deformation during wrapping. This Standard is identical with and has been reproduced from ISO 7802:1983. (MT-006)
AS 25281982 Bolts, studbolts and nuts for flanges and other high and low temperature applications (ISO 225, ISO 272:1982, ISO 4759-1:1978, ISO 885:1976, ISO 888:1976, ISO 898-1) 40pp
Specifies requirements for fasteners mainly intended for bolting for flanges and other pressure-containing purposes. Covers a metric series for the temperature range -50C to +300C and an inch series for -250C to +575C. Appendices deal with strength and performance of inch series studbolts at elevated temperatures, method for checking squareness of thread, sampling for mechanical properties, material standards for inch bolting and metric equivalents for inch series studbolts and nuts. (ME-029)
AS 25071998 The storage and handling of agricultural and veterinary chemicals 53pp
Sets out requirements and recommendations for the safe storage and handling of agricultural and veterinary chemicals on farms and in other rural industries. Advice is given on storage installations, fire precautions, waste disposal, operations and personnel safety. A discussion of the hazards presented by agricultural and veterinary chemicals and guidelines for emergency procedures (including first aid) are provided in appendices. (CH-009)
AS 25291982 Collection of reliability, availability and maintainability data for electronics and similar engineering use (IEC 60362 (1971)) 5pp
Provides guidance on the collection of reliability data on the field performance of electronic components, equipment and systems to provide data for the comparison of actual and predicted reliability, the improvement of achieved reliability, and the derivation of availability and maintainability information. The Standard can be applied to any other field of engineering for which such data are requested. Technically identical with IEC 362. (QR-005)
AS 2508 Safe storage and handling information card AS 2508.2.0072001 Liquefied petroleum gas 2pp
Provides general safety information for storing and handling LP Gas, including first aid information and emergency procedures for dealing with leaks and fires. (CH-009)
AS 25301982 Presentation of reliability data on electronic and similar components (IEC 60319 Ed. 2.0 (1978)) 12pp
Provides guidance on the presentation of the detailed data, such as the change in a characteristic with time or on the failure rate(s) of the associated component(s), that are essential to the prediction of the operating performance of electronic or similar equipment. The Standard is technically identical with IEC 319. (QR-005)
3pp
Sets out a method for measuring the deflection under load of peaks on protective helmets. (CS-097)
5pp
Sets out a method for determining the ability of a protective helmet to distribute the force of an impact. (CS-097)
14pp
AS/NZS 2512 Methods of testing protective helmets AS/NZS 2512.1:1998 Definitions and headforms (ISO/DIS 6220)
Specifies requirements for drying cabinets intended for use in hospitals for the drying of medical equipment. Guidance on information that should be supplied with enquiries and orders is given in an appendix. (ME-003)
AS 25341997 Lead and lead alloysSampling for chemical and spectrochemical analysis 12pp
Specifies methods for the sampling of lead and lead alloys and procedures for the preparation of laboratory samples required for chemical and spectrochemical analysis (CH-010)
31pp
Sets out general information relating to the methods of testing protective helmets and defines commonly used terms. (CS-097)
AS 25181992 Fusion-bonded low-density polyethylene coating for pipes and fittings 13pp
Specifies requirements for coating for protection against corrosion, where the coating is not subject to weather exposure (a safe period of 18 months of weather exposure is allowed for to cover an extended storage period prior to installation), and the pipeline operating temperatures are not above +60C nor below -40C. Coating thickness for normal
AS/NZS 2535 Test methods for solar collectors AS/NZS 2535.1:2007 Thermal performance of glazed liquid heating collectors including pressure drop (ISO 9806-1:1994, MOD) 72pp
Establishes methods for determining the thermal performance of glazed liquid heating solar collectors. It
7pp
(CS-097)
89
AS 25371994
provides test methods and calculation procedures for determining the steady-state and quasi-steady-state thermal performance of solar collectors. The Standard is technically equivalent to and has been reproduced from ISO 9806-1:1994. (CS-028)
8pp
Sets out a procedure for using the 'Anot A' test for use in the sensory analysis of foods. (FT-022)
AS 25371994 Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications 26pp
Amendment 1 11 December 2002 Specifies requirements for mechanical jointing fittings suitable for use as fixed joints, with cross-linked polyethylene (PE-X) pipes manufactured in accordance with AS 2492. (PL-006)
15pp
Sets out a forced-choice method for ranking in the sensory analysis of foods when determining if differences exist between three or more samples. (FT-022)
AS 2550 Set2008 Cranes, hoists and winchesSafe use Set 543pp AS 2550 Cranes, hoists and winchesSafe use
5pp
15pp
Specifies requirements for the design, construction, performance and labelling of vehicle support stands. (CS-043)
Sets out a list of terms commonly used in Australia in sensory examination of foods with each term defined in accordance with its accepted meaning. (FT-022)
59pp
11pp
41pp
Specifies requirements for the design, construction, performance and labelling of vehicle support stands. (CS-043)
Specifies requirements for grey iron pressure fittings of nominal sizes up to and including DN 600, intended primarily for the conveyance of water under pressure. One class of fitting is specified, suitable for a variety of jointing systems. (WS-016)
Amendment 1 21 May 2004 Specifies the minimum requirements for the safe use of cranes. It also specifies requirements for planning, selection, siting, erection and dismantling, operation, maintenance, inspection and repair of cranes. (ME-005)
AS 2550.32002 Bridge, gantry, portal (including container cranes), jib and monorail cranes 27pp
Specifies the minimum requirements for the safe use of bridge, gantry, portal (including container cranes), jib and monorail cranes. It also specifies requirements for planning, selection, siting, erection and dismantling, operation, maintenance, inspection and repair of the above types of cranes. (ME-005)
62pp
Amendment 1 11 October 2000 Provides a set of compatible subcontract conditions for subcontracts involving site work on projects where AS 21241992 is in use as the head contract between the main contractor and the principal. (MB-010)
62pp
19pp
Provides a set of compatible subcontract conditions for subcontracts involving site work on projects where AS 21241992 is in use as the head contract between the main contractor and the principal.
Specifies requirements for the safe use of tower cranes, covering planning, selection, siting, personnel, inspection, testing, erection, dismantling, personnel safety, operation, maintenance and repair. Appendices provide typical inspection and testing certificates as well as inspection testing check sheets. (ME-005)
45pp
Amendment 1 11 October 2000 Provides a set of compatible subcontract conditions for subcontracts involving site work on projects where AS 21241986 is in use as the head contract between the main contractor and the principal. (MB-010)
32pp
Specifies requirements for the safe use of mobile cranes. It includes sections on planning, selection, siting, erection, dismantling and operation together with a section on load limiting and indicating devices. (ME-005)
AS 2542.2.12007 Specific methodsPaired comparison test (ISO 5495:2005, ISO 5495:2005/Cor 1:2006) 22pp
Describes a procedure for determining whether there exists a perceptible sensory difference or a similarity between samples of two products concerning the intensity of a sensory attribute. (FT-022)
15pp
Amendment 1 13 February 2008 Adopts ISO 4120:2004 to specify a procedure for determining whether a perceptible sensory difference or similarity exists between samples of two products. The method is a forced-choice procedure. The method is applicable whether a difference exists in a single sensory attribute or in several attributes. (FT-022)
AS 2542.2.32007 Specific methodsGuidelines for the use of quantitative response scales (rating) (ISO 4121:2003) 14pp
Sets out guidelines for measuring the magnitude of a predefined sensory characteristic, e.g. sweetness, degree of liking, by assigning a rating on a response scale. (FT-022)
AS 2545/B1987 Subcontract conditionsAnnexure to AS 2545 including certificate of substantial completion form of formal instrument of agreement 100pp
(MB-010)
AS 2548 Battery chargers for lead-acid traction batteries AS 2548.11998 Battery chargers for vented cells 12pp
16pp
19pp
Amendment 1 13 February 2008 Adopts ISO 10399:2004 to specify a procedure for determining whether a perceptible sensory difference or similarity exists between samples of two products. The method is a forced-choice procedure. (FT-022)
Specifies requirements for the design, testing and performance of battery chargers for charging vented leadacid batteries used in traction applications, e.g. forklift trucks. Includes graphs of maximum charging current version cell voltage. (EL-005)
Specifies the requirements for the safe use of vehicle hoists as defined in AS 2549. It includes sections on planning, selection, siting, operation and maintenance, inspection and repair. Appendices provide examples of an inspection and testing certificate, and a typical logbook format. It is intended for use with AS 2550.1 and AS/NZS 1418.9 which specifies the design and installation requirements for vehicle hoists. (ME-005)
90
47pp
Specifies requirements for the safe use of mobile elevating work platforms. (ME-005)
41pp
Amendment 1 31 January 2008 Specifies requirements for the safe use of vehicle loading cranes. Includes sections on planning, selection, siting, operation, maintenance, inspection and repair, and limiting and indicating devices. Appendices cover terminology of parts and motions, assessments for continued use, a sample inspection and testing certificate, examples of motions that increase load moment and advice on risk management. (ME-005)
18pp
Specifies the requirements for the safe use of building maintenance units as defined in AS 2549. It includes sections on planning, selection, siting, operation and maintenance, inspection and repair. Appendices provide examples of an inspection and testing certificate, and a typical logbook format. It is intended for use with AS 2550.1, and AS 1418.13 which specifies the design and installation requirements for building maintenance units. (ME-005)
AS/NZS 2557:1999 Limits and methods of measurement of radio interference characteristics of vehicles, motor boats and spark-ignited engine-driven devices (CISPR 12 Ed. 4.0 (Bilingual 1997)) 46pp Available Superseded
Provides designers, manufacturers and suppliers of electrical and electronic devices for use in vehicles, motor boats and spark-ignited, engine-driven devices with limits and methods of measurement to provide protection to the radiofrequency spectrum from radio disturbances. This Standard is identical with and has been reproduced from CISPR 12:1997. (TE-003)
38pp
Specifies the requirements for the safe use of concrete placing equipment, covering planning, selection, siting, personnel, erection, dismantling, operation, maintenance, inspection and assessment. The appendices include mandatory and advisory warning and safety signs, noise levels, types of accidents and logbook data. (ME-005)
34pp
Specifies the requirements for the safe use of mast climbing work platforms as defined in AS 2549. It includes sections on proposed site use criteria, sitespecific considerations, supplier's information, site for erection, erection alteration and dismantling, commission testing and handover, operation and inspection testing and repair. Appendices give guidance on hazards, site inspection check list, handover certificate, record of training, operating instructions, logbook format and inspection and test format. It is intended for use with AS 2550.1 and AS 1418.16, which specifies the design requirements for mast climbing work platforms. (ME-005)
44pp
Specifies requirements for the safe use of telescopic handlers. It includes sections on planning, selection, siting, operation, maintenance, inspection and repairs. (ME-005)
19pp
Specifies requirements for the safe use of self-erecting tower cranes, covering planning, selection, siting, installation, maintenance, inspection, repair and operation. (ME-005)
Specifies general principles, requirements and recommendations for lighting of both indoor and outdoor sporting venues but does not cover lighting for television broadcasting. Addresses the visual needs of players, officials and spectators and examines the relevant photometric parameters and applicable light source technologies and luminaire designs. Also specifies terms and methods for measuring and quantifying designs and installations and explains, with examples, the effect of maintenance regimes. To be used in conjunction with other sport-specific Standards in the AS 2560 series as appropriate. Deals with the same technical areas as the 1982 edition but includes requirements as well as recommendations, plus updates the terminology of several parameters and replaces the concept of 'service illuminance' with that of 'maintained' illuminance. (LG-009)
AS/NZS 2554:1998 Hose and hose assemblies for air (ISO 2398:1995, ISO 5774:1997)
8pp
Specifies requirements for hose and hose assemblies for use with compressed air, and having maximum working pressures of up to 2.5 MPa. (RU-001)
91
AS 25631996
AS 25631996 Wavelength dispersive X-ray fluorescence spectrometersDetermination of precision 16pp
Describes procedures suitable for testing whether wavelength dispersive X-ray fluorescence spectrometers are functioning in a manner that will produce precise analytical results. Applicable to both sequential and simultaneous spectrometers. (MN-002) ignation system based on the properties of the weld deposits, the three most important being chemical composition, microstructure and hardness. (WD-002)
5pp
AS 2577 Australian fire incident reporting system AS 2577.11992 Description and implementation 44pp
Sets out methods to carry out vibration tests on complete, filled transport packages using sinusoidal excitation at a fixed low frequency. Identical with and reproduced from ISO 2247:2000. (PK-012)
AS 25641982 Aluminium oresDetermination of aluminium, silicon, iron, titanium and phosphorus contentsWavelength dispersive X-ray fluorescence spectrometric method 48pp
Sets out a wavelength dispersive X-ray fluorescence procedure and includes both a computer program for obtaining the results and a statistical evaluation of the method. It is applicable to all normal aluminium ores regardless of mineralogical type. (MN-003)
Describes the subjects about which information is to be reported and discusses methods of implementation of the reporting system. The Australian fire incident reporting system (AFIRS) is broadly compatible with both the US national fire incident reporting system (NFIRS) and the New Zealand fire incident reporting system. (FP-005)
4pp
Sets out a method of subjecting complete, filled transport packages to conditions of low air pressure, similar to those encountered in aircraft. Identical with and reproduced from ISO 2873:2000. (PK-012)
81pp
2pp
AS/NZS 2566 Buried flexible pipelines AS/NZS 2566.1:1998 Structural design 27pp
Sets out the classification system and codes for the information on fires to be reported for national use but does not preclude the collection of additional data required by user organizations. (FP-005)
Sets out a method for testing packagings and complete, filled transport packages in order to determine their resistance to internal pressure. (PK-012)
AS 2578 Traffic signal controllers AS 2578.11983 Physical and electrical compatibility 16pp
Specifies requirements for those characteristics of traffic signal controllers which interact with other equipment associated with road traffic signal installations, with the objective of ensuring that, as far as practicable, controllers from different manufacturers will be physically interchangeable, and that the functioning of the controller will be independent of the characteristics of externally connected equipment. It also specifies certain general requirements for the design and construction of controllers. (LG-006)
3pp
Sets out a method for testing packagings and complete, filled transport packages for leakage. (PK-012)
Specifies a practice for the structural design of buried flexible pipelines which rely upon side support to resist vertical loads. The practice applies to pipes with outside diameters equal to or greater than 75 mm, initial ring-bending stiffness equal to or greater than 1250 N/m/m and long-term ring-bending stiffness equal to or greater than 625 N/m/m. (WS-028)
AS 2582.102003 Compression and stacking tests using a compression tester (ISO 12048:1994) 5pp
Sets out a method for testing the resistance of complete, filled transport packages to compression using a compression tester, and a method for carrying out a stacking test on complete, filled transport packages using the same apparatus. Identical with and reproduced from ISO 12048:1994. (PK-012)
AS/NZS 2566.1 Supplement 1:1998 Structural designCommentary (Supplement to AS/NZS 2566.1:1998) 34pp
Gives helpful background information to AS/NZS 2566.1 and emphasizes the need for field compaction of the embedment material to be consistent with assumptions on which the equations are based. Appendix B gives worked examples which illustrate the application of AS/NZS 2566.1 for the selection of an appropriate pipe material and class of pipe. (WS-028)
78pp
AS 2582.112003 Sinusoidal vibration tests using a variable frequency (ISO 8318:2000) 4pp
Sets out two methods for carrying out a sinusoidal vibration test on a complete, filled transport package, using a variable frequency. Identical with and reproduced from ISO 8318:2000. (PK-012)
81pp
Specifies requirements for the installation of buried flexible pipelines with structural design in accordance with AS/NZS 2566.1. (WS-028)
Specifies the semantics and syntax of the computer programming language Pascal by defining requirements for a processor and for a conforming program. Two levels of compliance are defined for both processors and programs. This Standard is identical with and reproduced from ISO/IEC 7185:1990. (IT-015)
AS 2582 Complete, filled transport packagesMethods of test AS 2582.12003 Identification of parts when testing (ISO 2206:1987)
AS 2582.122006 Water-spray test (ISO 2875:2000) AS 2582.132006 Rolling test (ISO 2876:1985)
5pp
(PK-012)
2pp
2pp
Provides a system for the identification of the parts of a complete, filled package that are to be subjected to physical testing. Identical with and reproduced from ISO 2206:1987. (PK-012)
Describes a method for conducting rolling tests on a complete filled transport package. It may be performed either as a single test to investigate the effects of rolling or as part of a sequence of tests designed to measure the ability of a package to withstand a distribution system that includes a rolling hazard. (PK-012)
4pp
Provides a method for conditioning complete, filled transport packages prior to their physical testing. Identical with and reproduced from ISO 2233:2000. (PK-012)
2pp
Describes a test method for the immersion in water or complete, filled transport packages. (PK-012)
4pp
4pp
Provides a method for testing complete, filled transport packages, using a static load, in order to assess their performance in terms of strength and protection of their contents. Identical with and reproduced from ISO 2234:2000. (PK-012)
Describes a method for carrying out a toppling test on a complete, filled transport package which may be exposed to the danger of toppling during storage, transport and handling. (PK-012)
7pp
3pp
AS/NZS 2576:2005 Welding consumables for build-up and wear resistance 40pp
Amendment 1 26 October 2006 Specifies requirements for welding consumables for buildup and wear resistance, and defines a classification and des-
Sets out a method for testing the effect of vertical impact on a complete, filled transport package, by dropping. Identical with and reproduced from ISO 2248:1985. (PK-012)
Describes methods of testing for the stability of unit loads. Also intended to assess the performance of completely formed unit loads as they are subjected to the hazards of environmental exposure, storage, handling and transportation. (PK-012)
8pp
5pp
Sets out methods for horizontal impact tests on complete filled transport packages, using the inclined plane test and the pendulum test. Identical with and reproduced from ISO 2244:2000. (PK-012)
Describes a method to carry out a vertical random vibration test on a complete, filled transport package(s) and unit loads using a random excitation. (PK-012)
92
14pp
AS 26121997 Aluminium and aluminium alloysSampling for chemical and spectrochemical analysis 11pp
Specifies methods for obtaining a representative sample of aluminium and aluminium alloys and procedures for the preparation of labratory samples required for the determination of their chemical composition by chemical and spectrochemical analysis. (CH-010)
Describes a procedure for the determination of flash and fire points of petroleum products using the Cleveland open cup apparatus. (CH-009)
21pp
Specifies sizes, tolerances and performance requirements for gypsum plasterboard. Test methods are given in Appendices. (BD-011)
25pp
Amendment 1 26 October 2007 Specifies the designations, and the requirements for design, construction, testing, and marking of safety devices intended for fitment to gas cylinders. (ME-002)
AS/NZS 2589 Gypsum linings in residential and light commercial constructionApplication and finishing AS/NZS 2589.1:1997 Gypsum plasterboard Available Superseded 70pp
AS 26141998 Copper and copper alloysSampling for chemical and spectrochemical analysis, and physical testing 15pp
Sets out methods for obtaining a representative sample of copper and copper alloys and procedures for the preparation of laboratory samples required for the determination of their chemical composition by both chemical and spectrochemical analyses. The samples are taken either from molten metal or from cast forms. This Standard is also suitable for sampling copper and copper alloys for selective physical tests. (CH-010)
Specifies the requirements for the application and finishing of gypsum plasterboard in residential and light commercial construction. It provides a choice of levels of finish which allows flexibility of application. (BD-011)
18pp
Specifies minimum safety requirements, technical specifications and test methods for hydraulic trolley jacks. It does not apply to vehicle jacks, which are specified in AS/NZS2693. (CS-055)
14pp
Specifies requirements for the application and finishing of fibre reinforced gypsum plaster products in residential and light commercial construction. (BD-011)
4pp
14pp
Specifies requirements for the construction of freezer test packages, intended for use in the determination of performance of frozen food retail cabinets (AS 1731), and any freezer compartment of household refrigerators (AS 1430), or similar appliances. Three alternative types are given, with one indicated as preferred. (ME-008)
Specifies requirements for the design, construction, performance and labelling of hydraulic trolley jacks. (CS-055)
14pp
AS 2609 Methods for assessing modifications to the flavour of foodstuffs due to packaging AS 2609.12005 Sensory analysis (ISO 13302:2003)
Describes procedures suitable for taking samples from coal seams in underground and open-cut mines by pillar sampling, channel sampling, strip sampling, bore core sampling, drill cuttings sampling and open-cut slot sampling. Does not apply to sampling from production moving streams or any other source of coal not in place. An example of a form for recording sampling data is provided in an appendix. (MN-001)
26pp
Specifies methods for assessing the changes caused by packaging to the sensory attributes of foodstuffs or their simulants. This Standard is identical to and has been reproduced from ISO13302:2003. (FT-022)
AS/NZS 2619:1998 Information and documentationFormat for information exchange (ISO 2709:1996) 6pp
Specifies the requirements for a generalized exchange format which will hold records describing all forms of material capable of bibliographic description as well as other types of records. It is identical with and has been reproduced from ISO 2709:1996. (IT-019)
AS/NZS 2596:2003 Seat belt assemblies for motor vehicles (ECE Regulation No. 16, MOD) 106pp
Specifies requirements for seat belt assemblies for use by adults and larger children intended for after market supply. This Standard modifies and has been reproduced from UN ECE Regulation 16 with variations for Australian and New Zealand included in a ZZ Appendix. (CS-075)
5pp
Describes principles of instrumental methods based on gas-liquid chromatography. These techniques are used in quality control work for monitoring levels of volatile organic compounds, particularly residual solvents, but cannot be used to assess the effect on food flavour of these components in the absence of supporting data from sensory tests. (FT-022)
AS/NZS 2596:1995 Seat belt assemblies for motor vehicles 66pp Available Superseded
Amendment 1 5 January 1997 Specifies requirements for seat belt assemblies for use in motor vehicles, excluding larger buses, trucks and specially constructed vehicles. It adopts the technical requirements of ECE Regulation No 16 with some Australian/New Zealand variations. (CS-075)
AS 2610 Set2007 Spa safety Standards Set AS 2610 Spa pools AS 2610.12007 Public spas
64pp
Classifies reinforced hose according to pressure rating, and includes requirements for length, diameter, wall thickness, low temperature flexibility, resistance to hydrostatic pressure and accelerated exposure. (PL-013)
25pp
4pp
45pp
Sets out guidance on a range of controlled demolition methods for use by planners, owners, engineers, contractors and other interested parties for the planning and execution of demolition of structures. (BD-059)
Specifies requirements for design, construction and operation of public spa pools based on safety and health considerations. Appendices include chemical operational parameters, spa heater sizing for outdoor installations and recommended procedures for operators of public spas (CS-059)
Classifies unreinforced hose according to pressure rating, and includes requirements for length, diameter, wall thickness, low temperature flexibility, resistance to hydrostatic pressure and accelerated exposure. (PL-013)
20pp
AS/NZS 2621:1998 TextilesGuide to the selection of correct care labelling instructions from AS/NZS 1957 19pp
Sets out guidelines to assist manufacturers in the selection of appropriate care labelling instructions from AS/NZS 1957 and specifies basic performance requirements and test methods for colourfastness and dimensional stability that may be used to determine whether an article complies with those requirements when cleaned in accordance with the instructions on the label. (CS-004)
Specifies requirements for design, construction and operation of private spa pools based on safety and health considerations. Appendices include chemical operational parameters and spa heater sizing for outdoor installations. (CS-059)
93
AS/NZS 2622:1996
AS/NZS 2622:1996 Textile productsFibre content labelling (ISO 6939:1988) AS/NZS 2633:1996 Guide to the specification of colours 6pp AS/NZS 2640:1994 Portable ramps for vehicles (BS Au 224a)
32pp
Specifies methods of labelling textile products with fibre content information. This revision clarifies allowable tolerances as well as the components included in the fibre content determination of a textile product. (CS-004)
Provides information on factors which should be taken into account when specifying colours. Describes various methods that may be used to specify colours, giving guidance in the selection of the appropriate method. (CH-003)
13pp
AS 2625 Mechanical vibrationEvaluation of machine vibration by measurements on non-rotating parts AS 2625.12003 General guidelines (ISO 10816-1:1995)
AS 26341983 Chemical plant equipment made from glassfibre reinforced plastics (GRP) based on thermosetting resins 36pp Obsolescent
Applies to contact moulded, filament wound and centrifugal cast laminates, ducting and fittings, pipes and fittings, and stationary, non-pressure tanks. Design, dimensions, construction and installation are dealt with. Appendices cover general considerations for GRP design, installation practice including jointing, information required for tendering or ordering, and a guide to surface defects (including colour prints showing a number of typical defect patterns). (PL-044)
Specifies safety and performance requirements for portable ramps used in the maintenance and display of motor vehicles. Design requirements and testing methods are included covering strength, structural integrity, roll-off and ease of mounting (drive on test). (CS-043)
AS/NZS 2642 Polybutylene (PB) plumbing pipe systems AS/NZS 2642.1:2007 Polybutylene (PB) pipe extrusion compounds 11pp
Specifies requirements for polybutylene extrusion compounds suitable for making polybutylene pipe for hot and cold water applications (PL-006)
19pp
Establishes general conditions and procedures for the measurement and evaluation of vibration using measurements made on non-rotating parts and, where applicable, on non-reciprocating parts. This Standard is identical with and has been reproduced from ISO 10816-1:1995. (AV-009)
AS 2625.42003 Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ (ISO 10816-3:1998) 29pp
Provides guidance on the measurement and evaluation of vibration machine sets such as steam turbine or electrical with nominal power above 15 kW and speeds between 120 r/min and 15 000 r/min when measured in situ. This Standard is identical with and has been reproduced from ISO 18016-3:1998. (AV-009)
8pp
AS/NZS 2642.1:1994 Polybutylene (PB) pipe extrusion compounds 11pp Available Superseded
Specifies the requirements for polybutylene extrusion compounds suitable for making polybutylene pipe for hot and cold water applications. Polybutylene compound complying with this Standard is not intended to be manufactured into pipes for use in gas reticulation. (PL-006)
Sets out requirements for installing, maintaining and operating solaria for cosmetic purposes. (CS-064)
AS 26361994 Sampling of venous and capillary blood for the determination of lead or cadmium concentration 8pp
Specifies the procedures for the sampling of blood, using needle and syringes or vacuum systems, for the subsequent determination of cadmium or lead. The Standard also includes appendices which describe the method for determining the contaminant analyte level in collection equipment, containers and swabs. (CH-036)
AS/NZS 2642.2:2008 Polybutylene (PB) pipe for hot and cold water applications 9pp
Specifies materials, dimensions and performance requirements for polybutylene pipe for hot and cold water plumbing applications, including domestic, industrial and agricultural purposes. (PL-006)
AS 26261983 Industrial safety belts and harnesses Selection, use and maintenance Available Superseded
9pp
AS 2638 Gate valves for waterworks purposes AS 2638.12002 Metal seated 32pp
Sets out recommendations and identifies matters considered essential for safe use of the belts and harnesses. Aspects covered include factors to be taken into account when selecting the style and type of device to be used; the importance of adequate type and position of anchorage device; the necessity for all components (e.g. D-ring and snap hook) to be compatible and safe for use with each other; correct methods of use; the need for proper inspection, storage and maintenance. (SF-015)
AS/NZS 2642.3:2008 Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications 20pp
Specifies requirements for mechanical jointing fittings suitable for use as fixed joints with polybutylene plumbing pipes manufactured in accordance with AS/NZS 2642.2. (PL-006)
This Standard specifies requirements for Class 16 and Class 35 solid gate metal-bodied and metal-seated gate valves for waterworks purposes, with a maximum operating temperature of 40C. (WS-022)
26pp
AS 26292008 Separable insulated connectors for power distribution systems above 1 kV 39pp
This Standard applies a method of connection and switching of transformers and other electrical equipment in distribution systems using special flexible cable connectors. (EL-007)
Amendment 1 19 April 2001 Specifies requirements for inside screw solid wedge, metal-seated sluice valves in non-rising stem design, for waterworks purposes. This Standard is applicable to Class 14, Class 16, Class 21 and Class 35 valves of nominal sizes DN 80 to DN 750, with a maximum working temperature of 60C. (WS-022)
AS 26451987 Information processingDocumentation symbols and conventions for data, program and system flowcharts, program network charts and systems resources charts (ISO 5807:1985) 25pp
Specifies symbols to be used in information processing documentation and gives guidance on the conventions for their use in data flowcharts, program network charts and system resources charts. Identical with and has been reproduced from ISO 58071985. (IT-015)
AS/NZS 2632 Codes for the representation of names of countries and their subdivisions AS/NZS 2632.1:2008 Country codes (ISO 3166-1:2006, ISO 3166-1:2006/Cor 1:2007) 73pp
Adopts ISO 3166-1:2006 which is intended for use in any application requiring the expression of current country names in coded form; it also includes basic guidelines for its implementation and maintenance. (IT-019)
33pp
Sets out requirements for PN 16 and PN 25 metalbodied resilient-seated gate valves for waterworks purposes, with a maximum operating temperature of 40C. (WS-022)
33pp
This Standard specifies requirements for Class 16 and solid gate metal-bodied resilient-seated gate valves for waterworks purposes, with a maximum operating temperature of 40C. (WS-022)
AS/NZS 2648 Underground marking tape AS/NZS 2648.1:1995 Non-detectable tape 6pp
105pp
Provides the structure for a code for the representation of names of principal administrative divisions, or similar areas, of countries etc. included in Part 1 of this Standard. This Standard is identical with and reproduced from ISO 3166-2:1998. (IT-019)
24pp
AS/NZS 2632.3:1999 Codes for formerly used names of countries (ISO 3166-3:1999) 11pp
Provides the principles and maintenance arrangements of a code for the representation of country names removed from editions 1 to 4 of ISO 3166 (AS 2632) and the consecutive edition of ISO 3166-1 (AS 2632.1). This Standard is identical with and reproduced from ISO 3166-3:1999. (IT-019)
Amendment 1 19 April 2001 Specifies requirements for inside screw metal-bodied resilient seated sluice valves in non-rising stem design, for waterworks purposes. This Standard is applicable to Class 16 valves of nominal sizes DN 80 to DN 750 with a maximum working temperature of 60C. (WS-022)
Specifies requirements for printed underground marking tape suitable for use in conjunction with underground public utility services as a means of indicating the proximity of a service. It applies to tape which is not detectable by metal detectors. (PL-030)
AS 26492007 Petroleum liquids and liquefied petroleum gasesMeasurementStandard reference conditions (ISO 5024:1999) 1p
Adopts ISO 5024:1999 which sets out the standard reference conditions of pressure and temperature for the measurement of liquid and gaseous petroleum products. (ME-049)
AS 26391994 Laminar flow cytotoxic drug safety cabinets Installation and use 16pp
Sets out recommended practices for the installation, operation, maintenance, decontamination and inspection of openfronted laminar flow cytotoxic drug safety cabinets. (ME-060)
AS 26502005 Common specifications for high-voltage switchgear and controlgear standards (IEC60694, Ed.2.2(2002) MOD) 103pp
Specifies requirements common to most high-voltage a.c. switchgear and controlgear equipment Standards. It is in-
94
AS 26511983 Liquid hydrocarbonsVolumetric measurement by turbine meter systems (ISO 2715:1981) 22pp
Amendment 1 11 May 1984 Provides guidance for the design, installation and maintenance of turbine metering assemblies. It includes appendices giving details of the parts and characteristics of turbine meters and provides a trouble shooting guide. Technically equivalent to ISO 2715. (ME-049)
Specifies performance and labelling requirements for corrosion inhibition products (commonly known as rust-proofing products) which are intended for application to fully assembled new or used motor vehicles. In particular, it relates to products which are intended to inhibit rust forming in concealed areas, and/or exposed areas of a motor vehicle. (CS-057)
AS 2670 Evaluation of human exposure to whole-body vibration AS 2670.12001 General requirements (ISO 2631-1:1997)
AS 26521983 Liquid hydrocarbonsVolumetric measurement by displacement meter systems other than dispensing pumps (ISO 2714:1980) 12pp
Provides guidance for the design, installation, operation and maintenance of metering systems having one or more displacement meters. Its content is common to all displacement meters. A typical arrangement of a meter station with three displacement meters is shown. Technically equivalent with ISO 2714. (ME-049)
41pp
Sets out procedures which are to be followed when applying corrosion inhibition products (commonly known as rust-proofing products) to motor vehicles. The Standard describes pretreatment procedures, possible accesses to surfaces that are to be treated, application requirements, inspection and finishing requirements as well as retreatment procedures if the conditions of contract require that the vehicle be periodically retreated. Further, the Standard includes sample 'Data Sheets' which are required to be prepared by the rustproofer before the vehicle is treated. (CS-057)
31pp
Defines methods for the measurement of periodic, random and transient whole-body vibration and indicates the principal factors that combine to determine the degree to which vibration exposure will be acceptable. Informative annexes provide guidance based on current opinion on the possible effects of vibration on health, comfort and perception and motion sickness. This Standard is identical with and has been reproduced from ISO 2631-1:1997. (AV-010)
20pp
AS 2663 TextilesWoven and knitted fabrics for window furnishings AS 2663.11997 Uncoated fabrics 8pp
AS 2670.21990 Continuous and shock-induced vibration in buildings (1 to 80 Hz) (ISO 2631-2:1989) 18pp
Provides guidance on human response to building vibrations and gives weighting curves of frequency response for equal conveyance of humans to continuous and intermittent vibration. Measurement methods are also given. Identical with and reproduced from ISO 2631-2:1989. (AV-010)
Specifies safety requirements for rotary lawnmowers including both petrol and electric types. A comprehensive set of test methods is employed to check the adequacy of design of the safety features and the robustness of the mower. The Standard is based on, but is not technically identical to, ISO 5395. (CS-033)
Amendment 1 5 July 1999 Specifies performance and labelling requirements for three classifications of woven and knitted curtain fabrics. (TX-018)
16pp
Sets out requirements for three performance levels of coated fabrics for curtains for domestic or commercial use. (TX-018)
AS 2670.42001 Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixedguideway transport systems (ISO 2631-4:2001) 9pp
Provides guidance on the evaluation of the effects of mechanical vibration on the comfort of passengers and crew in fixed-guideway systems. This Standard is identical with and has been reproduced from ISO 2631-4:2001. (AV-010)
16pp
Sets minimum performance requirements for vertical and holland blinds. Includes a test for opacity and proposes minimum levels for specifying whether the blind is 'light-filtering', 'room-darkening' or 'blockout'. (TX-018)
AS 26712002 Hydraulic fluid powerGeneral requirements for systems (ISO 4413:1998, MOD) 70pp
Specifies requirements for the design and manufacture of hydraulic fluid power systems. This Standard is an adoption with Australian modifications and has been reproduced from ISO 4413:1998. (ME-035)
AS 26651983 Smoke/heat venting systemsDesign, installation and commissioning 10pp Available Superseded
Sets out requirements for the design, installation and commissioning of smoke/heat release vents in conjunction with associated draught curtains and inlet ventilation in a building, for the purpose of venting smoke and hot gases from the building in the event of fire. (ME-062)
AS 26601991 Hose and hose assembliesAir/waterFor underground coal mines (ISO/TR 8354:1987) 6pp
Amendment 1 15 May 1992 Specifies requirements for fire-resistant and anti-static (FRAS) hose and hose assemblies for conveying air, stone dust and water in underground coal mines. (RU-001)
AS 2676 Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings AS 2676.11992 Vented cells 37pp
5pp
Defines terms most frequently used in relation to the sampling of materials for the determination of their physical and/or chemical characteristics. It is of a general nature, and does not contain terms for sampling in specialist areas, for which reference should be made to other specific Standards. Terms are also grouped according to sample identification, sampling and procedures and statistics of sampling. An index is provided. (CH-023)
Sets out recommended practices for the installation, maintenance, testing and replacement of vented secondary batteries permanently installed in buildings. (EL-005)
28pp
12pp
Specifies requirements for water intended for use as a constituent of the electrolyte for secondary batteries of both the lead-acid and alkaline type. Limits of impurities that are considered harmful to batteries are stipulated and the method of determining the amount of each impurity present is described in the appendices. (EL-005)
Part 2 sets out recommended practices for the installation, maintenance, testing and replacement of sealed secondary batteries permanently installed in buildings. (EL-005)
6pp
Specifies requirements for the design, materials and construction of inflatable boats intended to be used on public waterways. Not applicable to inflatable life rafts. Technically identical to ISO 6185. (CS-047)
95
AS 2678.12008
AS 2678 Zinc sulfide concentratesChemical analysis AS 2678.12008 Determination of zincSolvent extraction and EDTA titrimetric method (ISO 13291:2006) 18pp
Adopts ISO 13291:2006 to provide determination of zinc in zinc sulphide concentrates by a solvent extraction and EDTA titrimethric method. (MN-005) for timber thresholds. An appendix gives guidance on information to be given with enquiries and orders. (BD-021)
AS 2700S1996 (B11) Colour Standards for general purposesRich Blue AS 2700S1996 (B12) Colour Standards for general purposesRoyal Blue AS 2700S1996 (B13) Colour Standards for general purposesNavy Blue AS 2700S1996 (B14) Colour Standards for general purposes Sapphire AS 2700S1996 (B15) Colour Standards for general purposesMid Blue AS 2700S1996 (B21) Colour Standards for general purposes Ultramarine AS 2700S1996 (B22) Colour Standards for general purposes Homebush Blue AS 2700S1996 (B23) Colour Standards for general purposes Bright Blue AS 2700S1996 (B24) Colour Standards for general purposes Harbour Blue AS 2700S1996 (B25) Colour Standards for general purposesAqua AS 2700S1996 (B32) Colour Standards for general purposes Powder Blue AS 2700S1996 (B33) Colour Standards for general purposesMist Blue AS 2700S1996 (B34) Colour Standards for general purposes Paradise Blue AS 2700S1996 (B35) Colour Standards for general purposesPale Blue AS 2700S1996 (B41) Colour Standards for general purposes Bluebell AS 2700S1996 (B42) Colour Standards for general purposes Purple Grey AS 2700S1996 (B43) Colour Standards for general purposesGrey Blue AS 2700S1996 (B44) Colour Standards for general purposesLight Grey Blue AS 2700S1996 (B45) Colour Standards for general purposesSky Blue AS 2700S1996 (B51) Colour Standards for general purposes Periwinkle AS 2700S1996 (B53) Colour Standards for general purposesDark Grey Blue AS 2700S1996 (B55) Colour Standards for general purposes Storm Blue AS 2700S1996 (B61) Colour Standards for general purposesCoral Sea
19pp
Specifies requirements for the design, construction, performance and labelling of jacks designed to raise vehicles. (CS-055)
16pp
23pp
Adopts ISO 12739:2006 to provide determination of zinc in zinc sulphide concentrates by an ionexchange/EDTA titrimetric method. (MN-005)
AS 2678.32002 Determination of zinc contentHydroxide precipitation and EDTA titrimetric method (ISO 13658:2000) 24pp
Sets out a hydroxide precipitation/EDTA titrimetric method for determining the zinc content of zinc sulfide concentrates. This Standard is identical with and has been reproduced from ISO 13658:2000. (MN-005)
Amendment 1 11 April 1994 Specifies design and performance requirements for jacks, other than trolley jacks, which are intended for use with cars, trucks, trailers and other road vehicles. Covers jacks supplied with new vehicles as well as those supplied as accessories or replacements. Test methods for stability, durability, loss of height under load, ease of operation and load capacity are included. (CS-055)
6pp
Specifies requirements for jumper leads used for jump starting motor vehicles. The minimum length and current rating of jumper leads are specified. Tests for current rating and strength of cable terminations are included in appendices. (EL-005)
AS 2678.42002 Determination of silver contentAcid dissolution and flame atomic absorption spectrometric method (ISO 15247:1999) 16pp
Sets out an acid dissolution AAS method for determining the silver content of zinc sulfide concentrates. This Standard is identical with and has been reproduced from ISO 15247:1999. (MN-005)
AS 2698 Plastics pipes and fittings for irrigation and rural applications AS 2698.22000 Polyethylene rural pipe 5pp
Specifies requirements for polyethylene pipe for use in rural applications above and below ground. It is not applicable to pipes for fuel gas. (PL-006)
AS 2678.62002 Determination of gold contentAcid dissolution/solvent extraction/flame absorption spectrometic method (ISO 15249:1998) 16pp
Sets out a flame AAS method for determining the gold content of zinc sulfide concentrates. This Standard is identical with and has been reproduced from ISO 15249:1998. (MN-005)
AS 2698.31990 Mechanical joint fittings for use with polyethylene micro-irrigation pipes 15pp
Specifies requirements for mechanical joint fittings intended for use with polyethylene micro-irrigation pipes in accordance with AS 2698.1. (PL-006)
AS/NZS 2699 Built-in components for masonry construction AS/NZS 2699.1:2000 Wall ties 40pp
AS 26832000 Hose and hose assemblies for distribution of petroleum and petroleum products (excepting LPG) (ISO 1825:1996, ISO 2929:1991) 29pp
Specifies requirements for hose and hose assemblies for conveying petroleum and petroleum products, except for liquefied petroleum gas, at product temperatures up to 65C in ambient temperatures ranging from -20C to 55C. Intended for hose applications involving road and rail tankers, metered pumps, farm tanks, reeling, aviation and general plant operations. (RU-001)
Specifies requirements for wall ties for masonry and masonry-veneer walls of Type A and Type B, including cavity, veneer and remedial. (BD-028)
33pp
Specifies performance requirements covering corrosion resistance and tests for structural serviceability, for connectors and accessories built into masonry. (BD-028)
AS 26871997 TextilesUpholstery fabrics for domestic and commercial use (excluding face-coated fabrics) 11pp
Classifies upholstery fabrics on the basis of wear characteristics. It sets out for each class of fabric performance requirements in respect of abrasion resistance, colourfastness, dimensional change and other appropriate physical characteristics. (TX-018)
14pp
21pp
Amendment 1 4 March 1985 Specifies basic general purpose timber doors within set height and width limits. It covers flush doors with cellular, intermediate rail, blockboard and particleboard cores, and joinery doors of ledged and braced, frame ledged, panelled and louvred types. It does not cover doors used in fireresistant door-sets, special purpose doors or doors that are higher or wider than the maximum specified. An appendix gives guidance on information to be given with enquiries and orders. (BD-021)
Defines 206 reference colours to assist with the specification and matching of colours used in industrial, architectural and decorative areas, with particular emphasis on paints and related materials. Provides an explanatory text with tabulated colour data and practical equivalent colours, together with a foldout chart which gives a general indication of the range of colours. However, for colour matching purposes, the individual colour cards incorporated in AS 2700S should be used. Note: The colour chart is not included in the Electronic version of this document. (CH-003)
9pp
Specifies requirements for timber doorsets, i.e. an assembly comprising a door manufactured in accordance with AS 2688 and its hanging frame. Profiles are given for timber door frames, door jamb linings and split jamb linings and
96
97
AS 2700S1996 (P13)
AS 2700S1996 (P13) Colour Standards for general purposesViolet AS 2700S1996 (P14) Colour Standards for general purposes Blueberry AS 2700S1996 (P21) Colour Standards for general purposes Sunset Pink AS 2700S1996 (P22) Colour Standards for general purposes Cyclamen AS 2700S1996 (P23) Colour Standards for general purposesLilac AS 2700S1996 (P24) Colour Standards for general purposes Jacaranda AS 2700S1996 (P31) Colour Standards for general purposesDusty Pink AS 2700S1996 (P33) Colour Standards for general purposes Ribbon Pink AS 2700S1996 (P41) Colour Standards for general purposesErica Pink AS 2700S1996 (P42) Colour Standards for general purposes Mulberry AS 2700S1996 (P43) Colour Standards for general purposes Wisteria AS 2700S1996 (P52) Colour Standards for general purposesPlum AS 2700S1996 (R11) Colour Standards for general purposes International Orange AS 2700S1996 (R12) Colour Standards for general purposes Scarlet AS 2700S1996 (R13) Colour Standards for general purposes Signal Red AS 2700S1996 (R14) Colour Standards for general purposes Waratah AS 2700S1996 (R15) Colour Standards for general purposes Crimson AS 2700S1996 (R21) Colour Standards for general purposes Tangerine AS 2700S1996 (R22) Colour Standards for general purposes Homebush Red AS 2700S1996 (R23) Colour Standards for general purposes Lollipop AS 2700S1996 (R24) Colour Standards for general purposes Strawberry AS 2700S1996 (R25) Colour Standards for general purposesRose Pink AS 2700S1996 (R32) Colour Standards for general purposesApple Blossom AS 2700S1996 (R33) Colour Standards for general purposes Ghost Gum AS 2700S1996 (R34) Colour Standards for general purposes Mushroom Pink AS 2700S1996 (R35) Colour Standards for general purposesDeep Rose AS 2700S1996 (R41) Colour Standards for general purposesShell Pink AS 2700S1996 (R42) Colour Standards for general purposes Salmon Pink AS 2700S1996 (R43) Colour Standards for general purposesRed Dust AS 2700S1996 (R44) Colour Standards for general purposes Possum AS 2700S1996 (R45) Colour Standards for general purposesRuby AS 2700S1996 (R51) Colour Standards for general purposesBurnt Pink AS 2700S1996 (R52) Colour Standards for general purposes Terracotta AS 2700S1996 (R53) Colour Standards for general purposesRed Gum AS 2700S1996 (R54) Colour Standards for general purposes Raspberry AS 2700S1996 (R55) Colour Standards for general purposes Claret AS 2700S1996 (R62) Colour Standards for general purposes Venetian Red AS 2700S1996 (R63) Colour Standards for general purposesRed Oxide AS 2700S1996 (R64) Colour Standards for general purposesDeep Indian Red AS 2700S1996 (R65) Colour Standards for general purposes Maroon AS 2700S1996 (T11) Colour Standards for general purposes Tropical Blue AS 2700S1996 (T12) Colour Standards for general purposes Diamantina AS 2700S1996 (T14) Colour Standards for general purposes Malachite AS 2700S1996 (T15) Colour Standards for general purposes Turquoise AS 2700S1996 (T22) Colour Standards for general purposes Oriental Blue AS 2700S1996 (T24) Colour Standards for general purposesBlue Jade AS 2700S1996 (T32) Colour Standards for general purposesHuon Green AS 2700S1996 (T33) Colour Standards for general purposes Smoke Blue AS 2700S1996 (T35) Colour Standards for general purposes Green Ice AS 2700S1996 (T44) Colour Standards for general purposesBlue Gum AS 2700S1996 (T45) Colour Standards for general purposes Cootamundra AS 2700S1996 (T51) Colour Standards for general purposes Mountain Blue AS 2700S1996 (T53) Colour Standards for general purposes Peacock Blue AS 2700S1996 (T63) Colour Standards for general purposesTeal AS 2700S1996 (X11) Colour Standards for general purposes Butterscotch AS 2700S1996 (X12) Colour Standards for general purposes Pumpkin AS 2700S1996 (X13) Colour Standards for general purposes Marigold AS 2700S1996 (X14) Colour Standards for general purposes Mandarin AS 2700S1996 (X15) Colour Standards for general purposes Orange AS 2700S1996 (X21) Colour Standards for general purposesPale Ochre AS 2700S1996 (X22) Colour Standards for general purposes Saffron AS 2700S1996 (X23) Colour Standards for general purposes Apricot AS 2700S1996 (X24) Colour Standards for general purposes Rockmelon AS 2700S1996 (X31) Colour Standards for general purposesRaffia AS 2700S1996 (X32) Colour Standards for general purposes Magnolia AS 2700S1996 (X33) Colour Standards for general purposes Warm White AS 2700S1996 (X34) Colour Standards for general purposes Driftwood AS 2700S1996 (X41) Colour Standards for general purposesBuff AS 2700S1996 (X42) Colour Standards for general purposes Biscuit AS 2700S1996 (X43) Colour Standards for general purposesBeige
98
38pp
Specifies requirements for the design, construction and performance of electronic sensing equipment used in traffic control and counting systems for the detection of vehicles. It applies primarily to detector sensors of the permanently installed type associated with road traffic signal installations. (LG-006)
AS 27072002 Petroleum liquids and gasesFidelity and security of dynamic measurementCabled transmission of electric and/or electronic pulsed data 16pp
Sets out guidelines for ensuring the fidelity and security of pulsed data cabled transmission systems utilized for the metering of petroleum liquids and gases. (ME-049)
AS 27082001 Keyboarding speed tests (formerly known as 'Typing speed tests') 15pp
Sets out a method for the conduct, assessment and certification of keyboarding speed tests conducted in the English language. Does not deal with tests in the theory of keyboarding skills. The Standard is intended for use by all bodies that conduct keyboarding speed tests. (MS-016)
19pp
Sets out methods for measuring the dimensional features of gauges for screw threads of vee-form. Deals with gauges for single and multiple start, symmetric screw threads, with included angles of 47.5, 55, or 60. Provides information on terms and definitions used in the measurement of screw threads and basic information on the types of equipment to be used in the measurement of screw thread gauges. (ME-028)
AS/NZS 2712:2007 Solar and heat pump water heatersDesign and construction 55pp
Specifies performance-based requirements for the design and construction of both components of solar and heat pump hot water supply systems, and complete systems, for household premises and for commercial and industrial installations comparable with household installations, intended to deliver drinking water of acceptable quality. (CS-028)
AS 27141993 The storage and handling of hazardous chemical materialsClass 5.2 substances (organic peroxides) 20pp Available Superseded
Sets out requirements and recommendations for the safe storage and handling, including dispensing and disposal, of Class 5.2 substances. The Standard does not apply to organic peroxides that have entered a manufacturing process and have been subjected to physical or chemical treatment. A bibliography of documents providing guidelines on the preparation of emergency plans is provided in an appendix. (CH-009)
99
AS 27152003
AS 27152003 Heavy mineral sand concentrates Determination of pH value
that are coated on one or both sides with an organic film, and that are intended for fabrication into products for use in the construction or finishing of buildings. (MT-009)
2pp
Sets out a method for determining the pH value of a mineral sand concentrate. (MN-004)
AS/NZS 2717 WeldingElectrodesGas metal arc AS/NZS 2717.1:1996 Ferritic steel electrodes 29pp
AS 27291994 Rolling bearingsDynamic load ratings and rating life (ISO 281:1990) 12pp
Specifies methods of calculating the basic dynamic load rating and rating life of rolling bearings, manufactured from good quality hardened steel and basically of conventional design as regards the shape of rolling contact surfaces. This Standard is identical with and reproduced from ISO 281:1990. (ME-037)
AS 27481991 Information technologyData communication25-pole DTE/DCE interface connector and contact number assignments (ISO 2110:1989) 13pp
Specifies the 25-pole connector and the assignment of contact numbers at the interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) or parallel automatic calling equipment (ACE). It is applicable to voice band modems, public data network (PDN) facilities, telegraph signal converters, and automatic calling equipment where CCITT Recommendations V.24 and V.28 are applicable. Provides the dimensions of the connector housing, as well as the recommended means of providing a locking device (latching block) and connector shielding. This Standard is identical with and has been reproduced from ISO 2110:1989. (IT-001)
Specifies requirements for carbon steel electrodes and low or intermediate alloy ferritic steel electrodes for gas metal arc welding. It defines a classification and designation system for the electrodes, and includes a method for the easy selection of the weld metal based on its mechanical properties. (WD-002)
AS 27361999 Continuous forms used for information processing (BS 4623:1989) 9pp
Specifies requirements for sprocket-holed continuous stationery for use with printers with tractor feeders for both folded and reel-fed paper. Also includes requirements for multiple forms and packing, a set of definitions relating to continuous form paper, information to be provided by the purchaser, and recommendations on storage. This Standard is based on and has been reproduced from BS 4623:1989. (IT-008)
AS 2748 Supplement 11995 Information technologyData communication25-pole DTE/DCE interface connector and contact number assignmentsInterface connector and contact assignments for a DTE/DCE interface for data signalling rates above 20 000 bit/s (Supplement to AS 2748 1991) (ISO 2110:1989/Amd 1:1991) 3pp
Specifies connector and assignments for signalling rates above 20 000 bit/s in accordance with ITU-T Recommendations V.10 and V.11. This Standard is identical with and has been reproduced from ISO 2110:1989/Amendment 1:1991. (IT-001)
4pp
Amendment 1 31 January 1985 Sets out a spectrophotometric method for the determination of uranium (VI) in both fresh waters, in the concentration range 0.12 mg/L to 16 mg/L and saline waters in the range 0.3 mg/L to 40 mg/L. A preliminary chelating resin separation extends the application of the method of polluted and waste waters for the uranium (VI) concentration range 0.12 mg/L to 16 mg/L. (EV-008)
AS 2724 Ambient airParticulate matter AS 2724.51987 Determination of impinged matter expressed as directional dirtiness, background dirtiness and/or area dirtiness (directional dust gauge method) 7pp
Sets out a method for the collection by directional dust gauge and measuring by obscuration, of particulate matter in ambient air which impinges on vertical surfaces. Provision is made to distinguish variation of dirtiness with wind direction. (EV-007)
AS 27382000 Copper and copper alloysCompositions and designations of refinery products, wrought products, ingots and castings 21pp
Provides listings of designations and chemical composition limits of copper and copper alloys in general use in Australia. Includes refinery products, wrought products, ingot and cast products. An appendix matches the designations with other common designations used internationally including those in ISO Standards. (MT-002)
AS 27491985 Information processingBasic mode control procedures for data communication systems (ISO 1745:1975) 19pp
Specifies the implementation of the Australian standard 7bit coded character set for information interchange on data transmission channels. It also defines the formats of the transmitted messages and the supervisory sequences which are part of the transmission control procedures. Identical with ISO 1745:1975. (IT-027)
17pp
AS/NZS 2739:2003 Natural gas (CNG) fuel systems for vehicle engines 46pp
Sets out requirements for natural gas (CNG) fuel systems for motor vehicle engines used for propulsion or auxiliary functions. It also specifies requirements for the design and construction of component parts as well as their installation, testing, commissioning and periodic inspection. (ME-046)
Defines preferred number and tabulates the basic series R 5, R 10, R 20, R 40 and R 80. It includes general guidance on their use and deals particularly with the more rounded values tabulating both a first rounding and a second rounding. An Appendix describes precision of the values and regularity of the ratio. (ME-071)
AS/NZS 2754 Adhesives for timber and timber products AS/NZS 2754.1(Int):2008 Adhesives for manufacture of plywood and laminated veneer lumber (LVL) 21pp (Expires 31 December 2010)
Specifies requirements for adhesives suitable for use in the plywood and laminated veneer lumber (LVL) manufacturing industry. (TM-008)
19pp
Specifies safety requirements for portable hand-held electrically driven and internal combustion engine driven chainsaws. It does not apply to pole-mounted power pruners, hydraulic chainsaws, attachments fitted to chainsaws and mechanical aids assisting the task of cutting wood. The requirements are based on those specified in ISO11681-1 but consideration was also given to ANSIB175 and IEC60745-2-13. (SF-033)
Specifies requirements for general purpose wedge-type sockets. It does not cover wedge-type sockets of welded construction, for special purpose applications or where installed in lift installations. Guidance on information that should be supplied with enquiries and orders and guidance on care and use is given in appendices. (ME-025)
AS 27412002 Shackles
7pp
29pp
20pp
Specifies the safety requirements for portable, handheld internal combustion-engine driven chainsaws intended for use in arboriculture by an operator working up in trees. Guidance on the safe use of such chainsaws is given in an appendix. (SF-033)
Amendment 1 12 July 2002 Amendment 2 27 November 2008 Specifies requirements for forged shackles. Guidance on information that should be supplied with inquiries and orders and on the care and use of shackles is gievn in Appendices. (ME-025)
Specifies requirements for polymer emulsion adhesives, in one-component and two-component preparations, intended for wood-to-wood bonding. Appendices give methods for determination of minimum filmforming temperature and staining. (CH-017)
AS 2755 Textile fabricsBurning behaviour AS 2755.11985 Determination of ease of ignition of vertically oriented specimens 10pp
Part 1 describes a procedure in which the textile material is held vertically in a frame and ignited with a small flame. The duration of flame contact to ignite the specimen is measured. The mean of a number of measurements is made. (CS-086)
AS 27421984 Information processingUse of longitudinal parity to detect errors in information messages (ISO 1155:1978) 1p
Specifies a method for detecting errors in information messages by attaching one block check character to the transmitted information block (or text) and checking this character when it is received. Identical with ISO 1155:1978. (IT-015)
36pp
AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications Performance requirements 44pp
Specifies performance requirements for prepainted and organic film/metal laminate products in sheet and strip form
Sets out workshop safety requirements for dealing with Liquefied Natural Gas (LNG) fuelled engines and LNG fuel unloading methods, and requirements for CNG and LP Gas fuelled vehicles. (ME-046)
100
AS 27611989 Character sets and information coding Control functions for 7-bit and 8-bit coded character sets (ISO 6429:1988) 51pp
Defines control functions and their coded representations for use in a 7-bit code, an extended 7-bit code, an 8-bit code or an extended 8-bit code for codes structured in accordance with AS 1953. It is identical with and has been reproduced from ISO 6429:1988. It forms part of a basis subset of characters suitable for Australian requirements. (IT-027)
AS 27561997 Low-voltage switchgear and controlgear Mounting rails for mechanical support of electrical equipment (IEC 60715 Ed. 1.0 (Bilingual 1981), IEC 60715 Amd.1 Ed. 1.0 (Bilingual 1995)) 22pp
Specifies dimensional and functional requirements for 'Top hat' section, 'C' section and 'G' section mounting rails for the compatible mounting of the various electrical devices in switchgear and controlgear assemblies. Appendices cover steel mounting rails in respect of material properties, standard dimensions and tolerances and an application guide. This Standard is based on IEC 715:1981 and Amendment 1:1995. (EL-006)
AS 2773 Ultrasonic cleaners for health care facilities AS 2773.11998 Non-portable 20pp
AS 27631988 Vibration and shockHand-transmitted vibrationGuidelines for measurement and assessment of human exposure (ISO 5349) 14pp
Specifies methods for measuring and reporting handtransmitted vibration exposure in three orthogonal axes for one-third octave and octave bands and provides guidance for the evaluation of hand-transmitted vibration specified in terms of a frequency-weighted vibration acceleration and daily exposure time. It does not define the limits of safe exposure. (AV-010)
Specifies requirements for ultrasonic cleaners with a cleaning solution capacity of more than 30 L, which are intended to clean reusable medical and surgical equipment used in health care facilities. The Standard does not cover ultrasonic cleaners specifically designed for the cleaning and disinfection of endoscopes. Guidance on information that should be supplied with enquiries and orders and on care and use is given in appendices. (ME-003)
AS 2758 Aggregates and rock for engineering purposes AS 2758.11998 Concrete aggregates 22pp
AS 2773.21999 Benchtop
20pp
Provides a basis for specifying requirements for aggregates for use in concrete. This Standard is for use in conjunction with a works specification, and it is expected that requirements may be varied on the basis of local experience. The requirements relate to quality of rock, grading, durability and other properties of aggregates including lightweight aggregates. (CE-012)
AS 27642002 Fibre reinforced plastics (FRP) aluminium alloy gas cylindersHoop overwrapped 15pp
Specifies requirements for the materials, design, manufacture, inspection, pressure tests and markings of aluminium alloy gas cylinders reinforced by hoop overwrapped with fibre reinforced plastics (FRP) intended for the storage and transport of compressed gases and of water capacity exceeding 0.10 kg but not exceeding 130 kg. (ME-002)
Specifies requirements for ultrasonic cleaners with a cleaning solution capacity of not more than 30L, which are bench mounted and intended to clean reusable medical and surgical equipment used in health care facilities. Guidance on information that should be supplied with enquiries and orders and on the use of ultrasonic cleaners is given in appendices. (ME-003)
22pp
Sets out requirements for plastic petri dishes intended for single use in microbiological testing. (CH-001)
64pp
Specifies the test methods and certain performance requirements for rigid plastic containers, manufactured by any method and having nominal capacities up to and including 250 L or 400 kg. (PK-025)
AS 27752004 Mechanical vibration and shockMechanical mounting of accelerometers (ISO 5348:1998) 12pp
Describes the mounting characteristics of accelerometers to be specified by the manufacturer and gives recommendations to the user for the mounting of accelerometers. It applies to accelerometers which are mounted on the surface of structures in motion. It is not applicable to other types of accelerometers, such as relative motion pick-ups. This Standard is identical with and reproduced from ISO 5348:1998. (AV-008)
15pp
Specifies requirements for coarse aggregates for use in the manufacture of asphalt. The requirements relate to the quality of rock and other properties of aggregates and refer to test methods given in AS 1141. (CE-012)
AS/NZS 2777 Information processing systemsOpen Systems InterconnectionBasic reference model AS/NZS 2777.1:1998 The basic model (ISO/IEC 7498-1:1994)
59pp
AS/NZS 2772 Radiofrequency fields AS/NZS 2772.1(Int):1998 Maximum exposure levels3 kHz to 300 GHz 26pp Available Superseded (Expired 30 April 1999)
Amendment 1 5 April 1999 Specifies limits of exposure of the human body to radiofrequency radiation intended to avoid biological effects hazardous to the body in the frequency range 3 kHz to 300 GHz. The Standard applies to the occupational exposure of radiation workers and the incidental exposure of the general public. It does not apply to the irradiation of patients for medical diagnosis or treatment nor does it establish requirements for induced charges on steel structures or the ignition of explosives or flammable gases. (TE-007)
Specifies a common basis for the coordination of standards development for the purpose of systems interconnection, while allowing existing standards to be placed in perspective within the overall Reference Model. This Standard is identical with and has been reproduced from ISO/IEC 7498-1:1994. (IT-001)
12pp
Specifies the requirements for the supply of aggregates intended for use as railway ballast. The requirements relate to durability and other properties of aggregates and refer to test methods given in AS 1141. (CE-012)
29pp
Provides a general description of security services and related mechanisms, which may be provided by the Reference Model and defines the positions within the Reference Model where the services and mechanisms may be provided. This part extends the field of application of AS 2777, to cover secure communications between open systems. This Standard is technically identical with and reproduced from ISO 7498-2:1988. (IT-001)
21pp
AS 2772.21988 Principles and methods of measurement 300 kHz to 100 GHz 33pp
Specifies techniques and instrumentation for the measurement of potentially hazardous electromagnetic
Defines general mechanisms for the use of names and addresses to identify and locate objects in the OSI environment and defines the use of these mechanisms within the layered structure of the Basic Reference Model. This Standard is technically identical with and has been reproduced from ISO 7498-3:1989. (IT-001)
101
AS 2777.41990
AS 2777.41990 Management framework (ISO/IEC 7498-4:1989)
abnormal service conditions. This Standard is identical with and has been reproduced from IEC 1634:1995. (EL-007)
9pp
Defines a framework for coordinating the development of existing and future Standards for Open Systems Interconnection (OSI) Management. This Standard is technically identical with ISO 7498-4:1989. (IT-001)
22pp
AS 27991992 Resistance welding equipmentSingle-phase a.c. transformer type (ISO 669:1981) 21pp
Specifies and defines the characteristics of single-phase resistance welding equipment. It includes the information required on the equipment nameplate, and specifies the type tests and routine tests required. This Standard incorporates substantial parts of ISO 699:1981, Rating of resistance welding equipment. (EL-019)
86pp
Specifies general and performance requirements for delivery layflat fire hose of two types, viz., percolating and nonpercolating. Appendices deal with performance test procedures, additional requirements for fire hose, which may be specified by the purchaser, and detailed advice and recommendations on the information to be supplied by the purchaser at the time of enquiry or order. (FP-009)
AS 2793 Information processingCoded character sets for text communication AS 2793.11985 General information (ISO 6937-1:1983)
5pp
AS 28001985 Ambient airDetermination of particulate leadHigh volume sampler gravimetric collectionFlame atomic absorption spectrometric method 2pp
Sets out a method for the determination of nitric acidsoluble lead fraction of the material collected from ambient air by a high volume sampler. Measurement is carried out by flame atomic absorption spectrometry. (EV-007)
Sets out characteristics of oil of lemon. This edition includes a specification for the determination of flashpoint. (CH-021)
12pp
AS 27821997 Oil of Melaleuca, terpinen-4-ol type (Tea Tree oil) (ISO 4730:1996) 9pp
Specifies general characteristics of the oil of Melaleuca, terpinen-4-ol type (Tea Tree oil), in order to facilitate assessment of its quality. This Standard is identical with and has been reproduced from ISO 4730:1996. (CH-021)
Constitutes a general introduction to coded character sets for text communication and, in particular, defines terms used in this and subsequent parts of the Standard, describes the general structure of text communication code and specifies conformance requirements for the coded representation of communicated text at the coding interface. In addition, it gives, in annexes, a description of the method used to identify each graphic character and control function defined, a description of some general concepts of text communication, suggestions for equipment conformance requirements and recommendations for fall-back implementations. (IT-027)
AS/NZS ISO 2801:2008 Clothing for protection against heat and flameGeneral recommendations for selection, care and use of protective clothing (ISO/TR 2801:2007) 20pp
Adopts ISO/TR 2801:2007 to provide guidance for the selection, use, care and maintenance of clothing designed to provide protection against heat and flame. (SF-004)
AS 2793.21985 Latin alphabetic and non-alphabetic graphic characters (ISO 6937-2:1983) 37pp
Defines a repertoire of Latin alphabetic and nonalphabetic characters for the communication of text in European languages, specifies coded representations for the graphic characters and specifies rules for the definition and use of the defined character repertoire. It also gives, in annexes, definitions of three standard subrepertoires, a summary of the use of non-spacing diacritical marks in combination with the letters of the basic Latin alphabet, a description of the use of the non-spacing underline character, a summary of the use of Latin alphabetic characters, recommendations for fall-back presentations and a summary of the differences from CCITT Recommendations S.61 and S.100. (IT-027)
AS/NZS 2802:2000 Electric cablesReeling and trailing for mining and general use (other than underground coal mining) 54pp
Amendment 1 16 December 2003 Specifies the requirements for two classes of multicore elastomer insulated and sheathed flexible reeling and trailing cables for surface mining, underground mining (other than coal mining) and general use, where movable plant requires electricity supply at system voltages from 1.1/1.1 kV up to and including 33/33 kV. (EL-003)
68pp
Specifies dimensions and certain other properties of endless wedge belts, V-belts and their corresponding grooved pulleys for power transmission. Appendices provide recommended power ratings, information on and examples of design of belt drives, as well as recommendations on installation and storage. Methods of determination of electrical resistance and fire-resistance are also provided. Not applicable to industrial variable speed drives employing pulleys with movable flanges. Performance test data regarding power transmission is not included. (ME-024)
AS/NZS 2794:1994 Information technologyTelecommunications and information exchange between systems 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments (ISO/IEC 2593:1993) 17pp
Specifies the 34-pole connector, including assignments, to be used between data terminal equipment and data control equipment where V.35 or X.21bis is applicable. This Standard is identical with, and has been reproduced from ISO/IEC 2593:1993. (IT-001)
Defines the communications services provided for Electronic Funds Transfer (EFT) applications. Takes into account the requirements of an additional protocol that specifies minimum requirements using ISDN as a sub-network. (IT-005)
AS 27882002 Pneumatic fluid powerGeneral requirements for systems (ISO 4414:1998, MOD) 63pp
Specifies requirements for the design and manufacture of pneumatic fluid power systems. This Standard is an adoption with Australian modifications and has been reproduced from ISO 4414:1998. (ME-035)
Specifies product requirements for sawn and milled hardwood products. Moisture content, profiles, tolerances and grades are covered. Requirements are also given for glued laminating, finger jointing and endmatching. Guidance is given on information to be supplied when ordering. (TM-007)
30pp
Specifies grade descriptions for use with the hardwood milled products specified in AS2796.1. These are primarily appearance products. (TM-007)
29pp
AS 27911996 High-voltage switchgear and controlgearUse and handling of sulphur hexafluoride (SF6) in high-voltage switchgear and controlgear (IEC/TS 61634 Ed. 1.0 (Bilingual 1995)) 73pp
Provides guidance with regard to the safety of personnel working with sulphur hexafluoride (SF6) during normal and
Specifies product requirements and grade descriptions for sawn and milled hardwood for use in the production of furniture. Moisture content, tolerances, glue laminating and finger jointing are covered. The grades are not intended to indicate a ranking of quality. They are primarily used with appearance products. (TM-007)
102
AS 2805.14.12000 Secure cryptographic devices (retail) Concepts, requirements and evaluation methods (ISO 13491-1:1998) 21pp
Specifies requirements for secure cryptographic devices which incorporate the cryptographic processes. The Standard has two primary purposes: to state the requirements concerning both the operational characteristics of SCD's and the management of such devices throughout all states of their life cycle and to standardize the methodology for verifying compliance with those requirements. This Standard is identical with and has been reproduced from ISO 13491-1:1998. (IT-005)
10pp
Specifies methods of protecting from disclosure the information contained in electronic messages formatted in accordance with the AS 2805 series. (IT-005)
AS 2805.14.22003 Secure cryptographic devices (retail) Security compliance checklists for devices used in magnetic stripe card systems (ISO 13491-2:2000) 30pp
This Standard provides a security compliance checklist for evaluating secure cryptographic devices (SCDs) used in magnetic stripe systems in accordance with AS 2805.14.1:2000. (IT-005)
4pp
Provides methods for ensuring the integrity of a file during transfer between communicating entities. (IT-005)
29pp
35pp
This Standard specifies the different kinds of file transfer used in the retail banking environment. The Standard has modifications for Australian conditions set out in Annex ZA. (IT-005)
Adopts ISO 18245:2003 to align Australian usage of merchant category codes with international practices. (IT-005)
12pp
Specifies requirements for the content of the card parameter table (CPT) for multiple acquirer terminal cryptographic units (TCUs). (IT-005)
32pp
30pp
Amendment 1 24 November 2003 Amendment 2 15 February 2006 Amendment 3 25 January 2007 Specifies the key management principles for keys used in the authentication, encipherment and decipherment of electronic messages relating to financial transactions within the retail banking environment. (IT-005)
194pp
Specifies requirements for the sampling of aluminium ores from moving streams and stationary situations, including stopped-belt sampling, to provide gross samples for sample preparation. This Standard is reproduced from ISO 8685:1992 with and additional Australian appendix. (MN-003)
Amendment 1 15 April 2008 Provides requirements for a common interface enabling messages to be exchanged between systems adopting a variety of application specifications. It also provides guidelines for the structure, format and content of messages. (IT-005)
24pp
AS 2805.12.22008 Application and registration procedures for Institution Identification Codes (IIC) 8pp
Adopts ISO 8583.21998 to align Australian Institution Identification Codes procedures with international usage. (IT-005)
Sets out methods for the preparation of samples of aluminium ore. This Standard is an adoption with national modifications, and has been reproduced from ISO 6140:1991. (MN-003)
AS 2805.12.32008 Maintenance procedures for messages, data elements and code values (ISO 8583-3:2003) 11pp
Adopts ISO 8583.3:2003 to align Australia procedures for maintaining messages, data elements and code values with international conventions. (IT-005)
AS 2806.52003 Methods for checking the precision of sampling (ISO 10277:1995) 15pp
Specifies the experimental methods to be applied for checking the precision of sampling of aluminium ores, expressed in terms of the standard deviation, being carried out in accordance with the methods prescribed in AS 2806.1. This Standard is reproduced from ISO 10277:1995. (MN-003)
3pp
Amendment 1 15 April 2008 Specifies secure hash functions and is applicable to the provision of authentication, integrity and nonrepudiation services for interfaces for electronic funds transfer. (IT-005)
8pp
Specifies the algorithm for the secure hash function MD5 for interfaces for electronic funds transfer. (IT-005)
AS 2806.62003 Methods for checking the bias of sampling (ISO 10226:1991) 5pp
Specifies the experimental methods for checking the bias of sampling of aluminium ores, when sampling is carried out in accordance with the procedures specified in AS 2806.1. This Standard is redproduced from ISO 12206:1991. (MN-003)
6pp
Specifies the algorithm for the secure hash function SHA-1. (IT-005)
8pp
Adopts ISO6139:1993 with national modifications to provide experimental methods for evaluating the heterogeneity of distribution of aluminium ores for the purpose of determining the minimum number of primary increments and consequently the sampling scheme. (MN-003)
103
AS/NZS 2807:2000
AS/NZS 2807:2000 Reporting outstanding orders (in the book trade) 3pp
Proposes a code of practice for use by book publishers when reporting the reasons why orders for books have not been filled. An abbreviated report code and the valid status codes are given for each category of outstanding orders report as well as additional information which needs to be supplied for particular reports. (IT-019)
AS 2815 Training and certification of occupational divers AS 2815.12008 Occupational SCUBA diverStandard 34pp
Specifies the training activities and competencies required for training and certification of occupational divers who are required to work safely and competently as members of an occupational diving team using self-contained underwater breathing apparatus (SCUBA). The qualification covers the activities for which SCUBA is intended to be used in on-shore occupational diving, i.e. diving involving limited exertion and minor use of tools. (SF-017)
9pp
Provides guidance on the prevention of accidental drownings and injuries in private swimming pools and spas and identifies potential hazards in the use and maintenance of private swimming pools. (CS-034)
14pp
AS 2809 Set2008 Road tank vehicles for dangerous goods Set 166pp AS 2809 Road tank vehicles for dangerous goods AS 2809.12008 General requirements for all road tank vehicles 14pp
(ME-057)
Amendment 1 27 April 2000 Specifies requirements for the design, construction and performance of gate units intended to be installed as part of a fence which complies with AS 1926.1. This Standard for gate units is primarily intended for use by manufacturers who are seeking certification. (CS-034)
25pp
Part 2 specifies the training activities and competencies required for the training and accreditation of divers who are required to work safely and competently using self-contained underwater breathing apparatus (SCUBA) or surface-supplied underwater breathing apparatus (SSBA) to depths of 30 m; and on sites where no surface compression chambers are required to be present on site or within a convenient distance. Such qualification is the minimum required by regulatory authorities who are responsible for the control of on-shore diving involving hard work, machinery and use of a wide range of tools, e.g. construction of jetties and dams. Requirements for training divers for restricted certification, where the diver's underwater work capabilities are limited, are included. (SF-017)
AS 28212003 Fluid power systems and components CylindersIdentification code for mounting dimensions and mounting types (ISO 6099:2001) 56pp
Specifies a code for identifying cylinder mounting, envelope, accessory and connector dimensions, and for cylinder mounting and accessory types. (ME-035)
AS 28221985 AcousticsMethods of assessing and predicting speech privacy and speech intelligibility 14pp
Sets out objective methods for predicting the attainability of, and subjective methods for assessing actual attainment of, both reliable speech communication and speech privacy in a given environment. Applies to the determination of speech intelligibility in auditoriums, classrooms, lecture rooms, conference rooms etc. and speech privacy conditions in offices, conference rooms, hotels, motels, dwellings and schools. (AV-004)
29pp
Part 3 specifies the training activities and competencies required for the training and accreditation of divers who are required to work safely and competently using self-contained underwater breathing apparatus (SCUBA) to depths of 30 m; using surface-supplied underwater breathing apparatus (SSBA) to depths of 50 m; and on sites with surface compression chambers present or within a convenient distance. Such qualification is the minimum required by regulatory authorities who are responsible for the control of off-shore diving, e.g. oil and gas exploration. Requirements for training divers for restricted certification, where the diver's underwater work capabilities are limited, are included. (SF-017)
AS 28242003 Non-destructive testingUltrasonic methods Evaluation and quality classification of metal bearing bonds (ISO 4386-1:1992) 12pp
Specifies an ultrasonic testing method for determining bond defects between the bearing metal and the backing. (MT-007)
16pp
17pp
23pp
Part 4 specifies the training activities and competencies required for the further training and accreditation of experienced air divers to operate safely and competently as bellmen and lockout divers. Such qualification is the minimum required by regulatory authorities who are responsible for the control of deep diving offshore, e.g. oil and gas exploration. (SF-017)
Specifies requirements for the physical aspects of health care records such as size, quality, layout, colour, order of filing and record cover, and method of fixing the health care record forms/dividers within the record cover. (HE-025)
AS 28291986 British Association (BA) screw threads and associated gauges and gauging practice 18pp
Amendment 1 5 December 1986 Specifies requirements for British Association (BA) screw threads in sizes 0 BA (6 mm diameter) to 25 BA (0.25 mm diameter) inclusive. It gives information on the screw thread system, including tolerances, deviations, symbols used for the screw thread parameters, and designation, together with requirements for associated gauges and gauging practices used for the verification of the screw threads for sizes from 0 BA to 10 BA inclusive. Appendices give the basis of the tabulated values, notes on the pitch diameter equivalent of pitch and angle errors, and notes on the verification of screw threads. (ME-028)
Specifies requirements applicable to road tankers for the transport of cryogenic liquids. The requirements in this Standard are complementary to those requirements necessary to comply with AS 2809.11999. (ME-057)
30pp
AS/NZS 2810:1997 WoolDetermination of staple length and staple strength (IWTO-30-93, IWTO-30-93/Amdt 1:1995) 18pp
Specifies a method for the measurement of mean staple, mean staple strength, and the position of break in greasy wool suitable for worsted processing. It is identical with and has been reproduced from IWTO-30-93 and IWTO-3093/Amdt 11995. (TX-012)
Specifies the training activities and competencies required for the training and certification of occupational dive supervisors who are to supervise on-shore occupational diving operations using self-contained underwater breathing apparatus (SCUBA) or surfacesupplied underwater breathing apparatus (SSBA). Includes three levels of supervisor qualifications: for SCUBA diving, for no-decompression dives on SSBA and for unrestricted SSBA diving. (SF-017)
AS 28161992 Copper, lead and zinc sulfide concentrates Determination of hygroscopic moisture in the analysis sampleGravimetric method (ISO 9599:1991) 4pp
Specifies a gravimetric loss-in-mass method for the determination of hygroscopic moisture content. Applicable to copper, lead and zinc sulfide concentrates with hygroscopic moisture contents between 0.05% (m/m) and 2% (m/m). This Standard is identical with and reproduced from ISO 9599:1991. (MN-005)
AS/NZS 2817:1997 Implants for surgeryCare and handling of orthopaedic implants (ISO 8828:1988) 5pp
Sets out procedures for handling orthopaedic implants from receipt at the health care facility until they are implanted or discarded. It is technically equivalent to and reproduced from ISO 8828:1988. (HE-012)
Specifies general requirements for the technical competence and good management of a chemical laboratory so that compliance with the resulting Standard will provide an assurance that test data generated by the laboratory are of high quality, scientifically reliable, and in accordance with national and international Standards. The Standard focuses on laboratory organization, personnel, facilities, test equipment and instrumentation, calibration, safety, sample storage, data recording, reporting, quality assurance system, and procedures for regular inspection and assessment. (CH-023)
104
Specifies requirements for the cathodic protection of buried or submerged metallic pipes and cables. (MT-014)
74pp
AS 2836.31998 Method for the determination of mass per unit area 2pp
Sets out the method for determining mass per unit area of surgical dressings and surgical dressing materials. (MS-005)
Provides guidelines for the cathodic protection of external surfaces of compact buried structures, including tank farms, service station tanks, tower footings, steel pilings (in soil), short well castings, compressor pump stations and associated pipe work. (MT-014)
2pp
64pp
Sets out the method for determining the dimensions of surgical dressings and surgical dressing materials. (MS-005)
AS/NZS 2843 Timber preservation plants AS/NZS 2843.1:2006 Timber preservation plant site design 21pp
Amendment 1 21 December 2006 Amendment 2 19 February 2008 Specifies requirements for the siting, design and layout of timber preservation plant sites. Deals in general terms with these aspects in a manner intended to prevent and mitigate the health risk of plant personnel and minimize environmental contamination from timber preservation plant sites. Applicable to all approved preservatives and, where necessary, specific requirements for some preservative are given. (TM-006)
Specifies requirements for the cathodic protection of external surfaces of fixed immersed structures, including offshore platforms, wharves, jetties, pontoons, sewage treatment plants, water treatment plants, lock gates, pump station piles in rivers, weirs, mooring buoys, piling, foundations and water inlet/outlet structures. (MT-014)
54pp
Specifies requirements for the cathodic protection of internal surfaces of pipes and structures including but not limited to heat exchanges, hot water systems, clarifiers, ballast and water storage tanks, cooling conduits and process plants. (MT-014)
AS 2836.61998 Method for the determination of absorption rate and water holding capacity 3pp
Sets out the method for determining the rate of absorption and water holding capacity of surgical dressings and surgical dressing materials. (MS-005)
60pp
Specifies requirements for the cathodic protection of steel in atmospherically- exposed, buried and submerged concrete in both new and existing structures. (MT-014)
27pp
Specifies requirements for the operation of timber preservation equipment used in the treatment area. Deals in general terms with these aspects in a manner intended to prevent and mitigate the health risk to treatment area personnel and minimize environmental contamination from timber preservation plant sites. (TM-006)
AS/NZS 2845 Water supplyBackflow prevention devices AS/NZS 2845.1:1998 Materials, design and performance requirements 107pp
Specifies requirements for the materials, design and performance testing of backflow devices used to prevent contamination of potable water supplies. (WS-023)
AS 2836.91998 Method for the determination of the presence of starch and dextrins 2pp
Sets out the method for determining the presence of starch and dextrins in surgical dressings and surgical dressing materials. (MS-005)
46pp
Sets out recommended requirements for the accommodation of computer systems in buildings for which special provisions are necessary or desirable. It excludes provisions for personal or home computers and those installed in an uncontrolled environment. (IT-002)
8pp
Specifies requirements for air gaps and break tanks used as backflow prevention devices for the protection of potable water supply. (WS-023)
Specifies requirements for absorbent woven cotton gauze suitable for use in the manufacture of surgical dressings. (MS-005)
20pp
Specifies requirements for field testing and maintenance of backflow prevention devices specified in AS 2845.1 and includes requirements for air gaps and break tanks as registered by the relevant authorities. (WS-023)
5pp
Specifies requirements for the cotton-viscose blends used in the manufacture of absorbent woven cotton gauze. (MS-005)
AS 28391988 Colour television receiversGeneral requirements and selected performance parameters Limits and methods of measurement 19pp
Amendment 1 4 October 1994 Standardizes methods of measurement and specifies limits for performance of colour television receivers and video cassette recorders. (CT-002)
AS 2848 Aluminium and aluminium alloys Compositions and designations AS 2848.11998 Wrought products 11pp
AS 2836 Methods of testing surgical dressings and surgical dressing materials AS 2836.01998 General introduction and list of methods 1p
(MS-005)
Sets out designation systems to identify grades of wrought aluminium and aluminium alloys and their tempers. Full chemical compositions are included for wrought grades currently available in Australia. (MT-003)
3pp
16pp
Specifies requirements for the designation, manufacture and testing of galvanized steel wire strand for structural, guying and general purpose applications. (ME-007)
Specifies two methods for the determination of the numerical value of the density of water under specified conditions, viz. by reference to a table and by calculation. The value of the density of standard mean ocean water under specified conditions is included in an appendix. The values are those proclaimed in a determination by the National Standards CommissionRecognised-value Standard of Measurement of DensityWater, dated 21 March 1985, in accordance with the National Measurement Act 1960. (ME-071)
105
AS 28501986
AS 28501986 Chemical analysisInterlaboratory test programsFor determining precision of analytical method(s)Guide to the planning and conduct 45pp
Provides guidance in choosing procedures and determining parameters used to select and validate methods of chemical analysis through the determination of the precision of those methods. Precision is determined in terms of repeatability, within-laboratory reproducibility and reproducibility. Defines relevant statistical terms, specifies test material requirements and discusses the number of laboratories required as well as the functions of a 'steering' committee to coordinate activities. Includes computer program to calculate repeatability and reproducibility and four samples of results sheets. Applicable to laboratories reasonably experienced in the methods to be evaluated with respect to the materials being analyzed. (CH-023)
AS/NZS 2857:1996 Timber drums for insulated electric cables and bare conductors 23pp
Specifies requirements for timber drums up to 5 t capacity for the transport and storage of insulated electric cable, bare conductor and other products for which the drums are suitable. The Standard includes nomenclature and dimensions of a preferred range of drums, together with details of materials, construction and marking and special requirements for the protection of cables. (EL-003)
sponse. Appendices provide additional guidance for cleaning and the precautions needed when undertaking hot work. A sample risk assessment form and written authority to enter are provided, as is a typical check list. (SF-037)
42pp
2pp
Provides guidance in eliminating or minimizing the need to enter confined spaces and in avoiding exposure to hazards which may be experienced where entry to a confined space is necessary. Includes Sections dealing with risk identification and assessment, monitoring prior to entry, education and training as well as rescue and first-aid. Appendices provide additional guidance for cleaning and precautions needed when undertaking hot work. A sample entry permit and risk assessment are provided, as is a typical check list. (SF-037)
Two methods for the determination of the numerical value of the density of mercury under specified conditions, viz. by reference to a table and by calculation. The values are those proclaimed in a determination by the National Standards CommissionRecognised-value Standard of Measurement of DensityMercury, dated 21 March 1985, in accordance with the National Measurement Act 1960. (ME-071)
AS 28692008 TamponsMenstrual
28pp
AS 28522004 PackagingPictorial marking for the handling of packages (ISO 780:1997) 7pp
Adopts ISO780:1997 to specify a set of symbols conventionally used for marking of transport packages in their physical distribution chain to convey handling instructions. (PK-025)
AS 2862 Copper, lead, zinc and nickel concentrates Sampling AS 2862.12008 Sampling procedures for determination of metal and moisture content (ISO 12743:2006) 77pp
Adopts ISO 12743:2006 to provide procedures for sampling copper, lead, zinc and nickel concentrates to determine the metal and moisture content. (MN-005)
Specifies requirements for menstrual tampons, including the specific absorptive capacity, microbial content, withdrawal cord pull strength and water repellency, marking and packaging. Information to be included in an accompanying leaflet is described. (CS-065)
22pp
10pp
Specifies a test procedure for establishing the temperatureperformance characteristics of temperature-controlled enclosures. This data forms the basis of a grading system that classifies enclosure performance levels. The Standard is applicable to all temperature-controlled enclosures regardless of size, temperature range, mode of operation, method of construction, type or purpose. (ET-005)
AS 2862.22008 Experimental methods for checking the precision of sampling (ISO 12744:2006) 15pp
Adopts ISO 12744:2006 to provide experimental methods for checking the precision of sampling of copper, lead, zinc and nickel concentrates. (MN-005)
Amendment 1 21 April 2004 Specifies requirements for menstrual tampons including length, pull strength and water repellency of the withdrawal cord, materials, absorptive capacity, microbial content, marking and packaging. Includes a classification system based on tampon absorbency with descriptive terms to be used in labelling tampons according to their absorbency range. Information to be given in an accompanying leaflet is described. (CS-065)
25pp
Specifies structural and performance requirements for twoand three-piece tinplate cans for general use. Nominal dimensions and capacities are given for a range of stock size cans up to a maximum nominal diameter or cross-section of 230mm. (PK-028)
AS 2862.32008 Experimental methods for checking the bias of sampling (ISO 13292:2006) 11pp
Adopts ISO 13292:2006 to provide experimental methods for checking the bias of sampling copper, lead, zinc and nickel concentrates. (MN-005)
AS 2856 Coal petrography AS 2856.12000 Preparation of coal samples for incident light microscopy 4pp
Sets out recommended procedures for the preparation of polished coal samples which are adequate for characterization of coals using various methods of incident light microscopy. (MN-001)
AS 28632008 Copper, lead, zinc and nickel concentrates Determination of mass loss of bulk material on drying (ISO 10251:2006) 13pp
Adopts ISO 10251:2006 to provide procedures for the determination of mass loss of bulk material on drying. (MN-005)
AS 2864 Methods for the analysis of rutile AS 2864.12003 Determination of titanium content Titrimetric method
AS 2870 Supplement 11996 Residential slabs and footingsConstruction Commentary (Supplement to AS 28701996) 47pp
Provides explanations and additional background material to assist in the interpretation of AS 28701996. (BD-025)
29pp
8pp
Sets out a procedure for the complete maceral analysis of all ranks of coal, aimed at obtaining the proportion of each maceral occurring within a coal, expressed as a volume percentage. (MN-001)
Sets out a titrimetric method using aluminium reduction and alluminium iron (III) sulphate titration for the determination of the titanium content of rutile. (MN-004)
AS 2856.32000 Method for microscopical determination of the reflectance of coal macerals 14pp
Sets out method for the microscopical determination of the maximum and random reflectance in oil of polished surfaces of coal macerals. (MN-001)
AS/NZS 2865 Set:2005 Safe working in a confined space Set AS/NZS 2865:2001 Safe working in a confined space 45pp
Provides requirements and guidance in eliminating or minimizing the need to enter confined spaces and in avoiding hazards which may be encountered where entry to a confined space is unavoidable. Contains Sections dealing with risk identification and assessment, monitoring prior to entry, education and training as well as emergency re-
106
6pp
268pp
Sets out a method for the determination of unpacked and packed bulk density of smelter-grade aluminium oxide primarily used for the production of aluminium. (MN-009)
6pp
Specifies requirements for the design and construction of carbon and carbon-manganese steel pipelines and associated piping and components that are used to transmit single-phase and multi-phase hydrocarbon fluids, such as natural and manufactured gas, liquefied petroleum gas, natural gasoline, crude oil, natural gas liquids and liquid petroleum products. (ME-038)
AS 28762000 Concrete kerbs and channels (gutters) Manually or machine placed 13pp
Specifies requirements for manually placed or machineplaced concrete kerbs and channels. The Standard is for users and providers to ensure the quality of the finished product. (CE-013)
Sets out a method for determining the amount of time taken for a given quantity of smelter grade alumina to flow by gravity through a precisely constructed standard funnel. (MN-009)
AS 2885.22007 Welding
117pp
8pp
Sets out a procedure for the determination of the attrition index of smelter-grade alumina. (MN-009)
Specifies the minimum requirements for materials, welding consumables, welding processes, weld preparations, qualifications of welding procedures and personnel, and fabrication and inspection requirements for the construction and maintenance welding of carbon and carbon-manganese steel pipelines down to 3.2 mm wall thickness, designed and constructed in accordance with AS 2885.1. (ME-038)
2pp
Provides a guide for the reporting of the aluminium oxide content of smelter-grade alumina. (MN-009)
66pp
Specifies minimum requirements for the operation and maintenance of pipelines designed to AS 2885.1. It also applies to pipelines designed and built under those Standards superseded by this Standard, when they are modified to operate under the conditions within the scope of this Standard. (ME-038)
AS 2879 Alumina AS 2879.12000 Determination of loss of mass at 300C and 1000C 8pp
Sets out a method for the determination of loss of mass on heating of aluminium oxide at 300C and further loss of mass on ignition at 1000C. This method is suitable for calcined alumina in the range 0.2% to 5% loss of mass at 300C and 0.1% to 2% loss of mass at 1000C. (MN-009)
79pp
9pp
Sets out a wet-sieving procedure for the determination of the percentage by mass of particles of smelter-grade alumina passing a 20 m aperture sieve. (MN-009)
AS 28832000 Analysis of metalsProcedures for the setting up, calibration and standardization of atomic emission spectrometers using arc/spark discharge 20pp
Sets out procedures and terms for the setting up, calibration and standardization of atomic emission spectrometers using arc/spark discharge for the analysis of metals. Also includes test procedures to ensure optimum equipment response. (CH-010)
Specifies methods for the pressure testing of petroleum pipelines in accordance with AS 2885.1 and AS 2885.3. It may also be used for testing other pipelines including those designed to AS 1697. (ME-038)
23pp
Specifies requirements for moulded or fabricated plastic waste fittings for use in plumbing installations. Such fittings are suitable for receiving short-duration, intermittent liquid discharges at temperatures not exceeding 95C. UPVC fittings for soil, waste and vent applications are not covered by this Standard. (PL-021)
AS 2888 Methods of testing plastics waste fittings AS 2888.02002 Introduction and list of methods 1p
(PL-045)
Sets out methods for sampling free-flowing heavy mineral sands from moving streams, to provide samples for chemical analysis, physical testing and determination of moisture. (MN-004)
AS 2888.12002 Method of determining the suitability of connection threads of BSP form 4pp
Sets out a method for determining the ability of threaded components of plastics waste fittings to withstand a tightening torque without damage. (PL-045)
8pp
Sets out a method for the determination of the angle of flow of smelter-grade alumina. (MN-009)
AS 2879.61995 Determination of the mass distribution of particle sizes using electroformed sieves 6pp
Sets out a dry sieve method, using electroformed sieves, for determining the mass distribution of the particle sizes in aluminium oxide primarily used for the production of aluminium. (MN-009)
13pp
3pp
Sets out the methods for the preparation of representative samples of heavy mineral sand concentrates collected in accordance with the procedures specified in AS 2884.1 and AS 2884.2. (MN-004)
Sets out two methods for pressure testing a plastics waste fitting to establish whether the fitting body is sound, viz hydrostatic pressure and internal air pressure. (PL-045)
AS 2879.71997 Determination of trace elements Wavelength dispersive X-ray fluorescence spectrometric method 24pp
Sets out a wavelength dispersive X-ray fluorescence spectrometric method for the analysis of aluminium oxide for trace amounts of any or all of the following elements: sodium, silicon, iron, calcium, titanium, phosphorous, vanadium, zinc, manganese, gallium, potassium, copper, chromium and nickel, expressed as the oxides on an as-received basis. (MN-009)
AS 2885 Set2008 PipelinesGas and liquid petroleum Set 547pp AS 2885 PipelinesGas and liquid petroleum AS 2885.02008 General requirements 14pp
AS 2888.42002 Method for air pressure/vacuum testing of plastics waste fittings 2pp
Defines the method for determining the resistance of plastics waste fittings to the application of internal air pressure followed by a vacuum. (PL-045)
Provides general requirements and guidance on the scope, purpose, application and other aspects of the AS 2885 series of Standards. (ME-038)
1p
Defines method for testing the trap seal of concealed membrane plastics waste traps. (PL-045)
107
AS 2888.62002
AS 2888.62002 Method for load testing of plastics waste outlets 2pp
Defines method for load testing a grating of a waste outlet that may be subject to live loading after installation. (PL-045)
AS 2891 Methods of sampling and testing asphalt AS 2891.1.12008 SamplingLoose asphalt AS 2891.1.22008 SamplingCoring method AS 2891.1.32008 SamplingAsphalt from slabs 11pp
(CE-006)
AS 2888.72002 Method for testing the seal of plastrics waste outlets 2pp
Defines the method for testing the hydrostatic sealing ability of plastics waste outlets. (PL-045)
4pp
(CE-006)
3pp
(CE-006)
2pp
Describes a method for determining the ability of plastics waste fittings and attachments to withstand he effect of differential thermal expansion of the arious materials comprising the assembly. (PL-045)
AS 2891.2.11995 Sample preparationMixing, quartering and conditioning of asphalt in the laboratory 3pp
Sets out a method for mixing, quartering and conditioning of asphalt mixes in the laboratory prior to use in laboratory test procedures in AS 2891. (CE-006)
AS 2891.2.21995 Sample preparationCompaction of asphalt test specimens using a gyratory compactor 4pp
Specifies the characteristics and establishes the test methods and controls as well as acceptance conditions for cellulose-cement flat sheets. (CE-006)
5pp
Sets out the method for determining, by direct measurement, the water and volatile oil contents in asphalt of 10 mm nominal size or less. (CE-006)
AS 2888.112002 Method for cyclic testing of plastics telescopic waste connectors (rubber-ring joint type) 2pp
Sets out a method for cyclic testing of telescopic waste connectors to determine the durability of the rubberring joint. (PL-045)
AS/NZS 2891.3.1:1997 Bitumen content and aggregate grading Reflux method 6pp
Amendment 1 5 August 1998 Sets out the method for determining, by hot solvent extraction, the binder content of mixes containing residual bitumen and subsequently the particle size distribution of aggregate by sieve analysis. (CE-006)
2pp
Sets out the method for determining the degree of particle coating of asphalt of nominal size 7 mm or greater, based on the percentage of coarse aggregate particles that are completely coated with binder. (CE-006)
AS/NZS 2890 (Set):2004 Parking Facilities Set AS/NZS 2890 Parking facilities AS/NZS 2890.1:2004 Off-street car parking 67pp
AS/NZS 2891.3.2:1997 Bitumen content and aggregate grading Centrifugal extraction method 6pp
Amendment 1 5 August 1998 Sets out the method for determining, by centrifugal extraction, the binder content of mixes containing residual bitumen, and subsequently the particle size distribution of aggregate by sieve analysis. (CE-006)
AS 2891.12.11995 Determination of the permanent compressive strain characteristics of asphalt Dynamic creep test 7pp
Sets out the method for determining, at standard test conditions, the accumulated axial deformation response of asphalt mixtures normally used in pavements. (CE-006)
Amendment 1 19 August 2005 Sets out minimum requirements for the design and layout of off-street parking facilities, including multistorey car parks for motor cars, light vans and motorcycles. It includes access and egress requirements for both public and private car parks, and car parking on domestic properties. (CE-001)
AS/NZS 2891.3.3:1997 Bitumen content and aggregate grading Pressure filter method 6pp
Amendment 1 5 August 1998 Sets out the method for determining, by pressure filtering, the binder content of mixes containing residual bitumen, and subsequently the particle size distribution of aggregate by sieve analysis. (CE-006)
49pp
Specifies minimum requirements for the design and layout of off-street parking facilities, including both single- and multi-level car parks, for motor cars, vans and motorcycles. It covers both internal design requirements and the requirements for access from and egress to public streets. Appendices include guidelines for parking provisions for people with disabilities. (CE-001)
AS/NZS 2891.14.1.1:1996 Field density testsDetermination of field density of compacted asphalt using a nuclear surface moisture-density gauge Direct transmission mode 5pp
Sets out the method for determining the field density of asphalt using a nuclear surface moisture-density gauge in the direct transmission mode of operation. (CE-006)
8pp
Sets out the method for preparing test specimens of freshly mixed asphalt (either produced in the laboratory or at a mixing plant) by the Marshall procedure and determining stability and flow values of the specimens using the Marshall apparatus. (CE-006)
AS/NZS 2891.14.1.2:1999 Field density testsDetermination of field density of compacted asphalt using a nuclear surface moisture-density gauge Backscatter mode 10pp
Sets out the method for determining the field density of layers of asphalt using a nuclear surface moisturedensity gauge in the backscatter mode of operation. The method is applicable to asphalt layers between 50 mm and 100 mm thick and to asphalts having a nominal maximum size not greater than 40 mm. (CE-006)
AS/NZS 2891.14.2:1999 Field density testsDetermination of field density of compacted asphalt using a nuclear thin-layer density gauge 11pp
Sets out the method for determining the field density of thin layers of asphalt using a nuclear thin-layer density gauge with two backscatter modes of operation or geometries. (CE-006)
15pp
Specifies requirements for the layout, design and security of bicycle parking facilities in any location, either on-street or off-street. Appendices give examples of bicycle parking hardware and examples of parking arrangements on footpaths. (CE-001)
AS 2891.82005 Voids and density relationships for compacted asphalt mixes 5pp
Sets out the method for determining the following voids and density relationships in compacted asphalt mixes:Percentage air voids from separately determined values of bulk density and maximum density. Absorbed binder, effective binder, maximum theoretical density, voids in the mineral aggregate, and voids filled with binder where the proportions of component materials are known. (CE-006)
21pp
AS/NZS 2891.14.3:1999 Field density testsCalibration of nuclear thin-layer density gauge using standard blocks 9pp
This Standard sets out the methods for the following: (a) The calibration of the density systems of a nuclear thin-layer density gauge, using standard blocks;(b) The calibration of the depth factor systems of a nuclear thin-layer density gauge, using standard blocks and plates. (CE-006)
Specifies requirements for the location, arrangement and dimensions of on-street parking facilities. Includes provision for special classes of vehicles and disabled users, together with guidelines for the control of parking. (CE-001)
108
AS 2900 Quantities and units AS 2900.02002 General principles (ISO 31-0:1992, ISO 31-0:1992/Amd 1:1998) 24pp
Provides general information about the principles concerning physical quantities, equations, quantity and unit symbols, and coherent unit systems. (ME-071)
Provides general information about mathematical signs and symbols, their meanings, verbal equivalents and applications. (ME-071)
AS 2900.12002 Space and time (ISO 31-1:1992, ISO 31-1:1992/Amd 1:1998) 14pp
Specifies names and symbols for quantities and units of space and time. (ME-071)
AS/NZS 2893:2002 Electric cablesLead and lead alloy sheaths Composition 4pp
Specifies the chemical composition of metallic sheathing for electric and telecommunication cables. An appendix provides guidance on the types of cables and service conditions for which the different compositions are primarily intended. (EL-003)
AS 2900.132002 Solid state physics (ISO 31-13:1992, ISO 31-13:1992/Amd 1:1998) 9pp
Specifies names and symbols for quantities and units of solid state physics. (ME-071)
AS 2900.22002 Periodic and related phenomena (ISO 31-2:1992, ISO 31-2:1992/Amd 1:1998) 8pp
Specifies names and symbols for quantities and units of periodic and related phenomena. (ME-071)
AS 29022005 Medical gas systemsLow pressure flexible hose assemblies (ISO 5359:2000) 11pp
Sets out requirements for low-pressure flexible hose assemblies for use with medical gases. Design, performance, identification and testing of low pressure flexible connecting assemblies used for conveying the medical gases at positive pressures up to 1400 kPa, and negative pressures not exceeding -95 kPa, are specified. Flexible hoses used in fixed secondary equipment are not dealt with in this Standard. Does not apply to manufacturer specific hoses provided by manufacturers of surgical tools as an integral part for use in the sterile operating area. (HE-017)
AS/NZS 2895 Performance of household electrical appliancesMicrowave ovens AS/NZS 2895.1:2007 Methods for measuring the performance of microwave ovens for household and similar purposes (IEC 60705, Ed. 3.2 (2006) MOD) 24pp
Specifies the reproducible performance measurements of household microwave ovens and combination microwave ovens from IEC 60705, Ed. 3.2(2006). In particular the principal performance characteristics and procedures for determining external dimensions, useable cavity volume, useable cavity dimensions, microwave power output, efficiency, uniformity of heating and heating of beverages. It does not include the subjective cooking tests of IEC 60705, Ed. 3.2(2006)., these are to be reproduced in AS/NZS 2895.3. (EL-015)
12pp
AS 2900.52002 Electricity and magnetism (ISO 31-5:1992, ISO 31-5:1992/Amd 1:1998) 28pp
Specifies names and symbols for quantities and units of electricity and magnetism. (ME-071)
Amendment 1 5 March 1998 Specifies the requirements for damp-proof course and flashing materials of the sheet membrane, strip and collar type for use in building construction. It does not cover vapour barriers; or mortar-type damp-proof courses. (BD-029)
22pp
AS 2900.62002 Light and related electromagnetic radiations (ISO 31-6:1992, ISO 31-6:1992/Amd 1:1998) 20pp
Specifies names and symbols for quantities and units of light and related electromagnetic radiations. (ME-071)
Provides structural and performance requirements, dimensions and capacities for a range of steel drums having a minimum nominal diameter of 220mm and a maximum nominal capacity of 250L. (PK-001)
AS 28961998 Medical gas systemsInstallation and testing of non-flammable medical gas pipeline systems 91pp
Amendment 1 5 October 1999 Specifies requirements for safety aspects, construction, testing, operation and maintenance of non-flammable medical gas systems used for patient care, including therapeutic, diagnostic and prophylactic applications, and for operating surgical tools. Suction pipeline systems for day care centres and clinical situations are included. Requirements for operating room pendants, columns and booms are also included. Does not apply to suction systems for laboratories or hospital dental units. (HE-017)
AS 2900.82002 Physical chemistry and molecular physics (ISO 31-8:1992, ISO 31-8:1992/Amd 1:1998) 26pp
Specifies names and symbols for quantities and units of physical chemistry and molecular physics. (ME-071)
20pp
Specifies a method for the design, conduct, assessment and certification of office shorthand speed tests of 60 wpm or greater. Includes a list of 500 common Australian business words. (MS-016)
AS 2898 Radar speed detection AS 2898.12003 Functional requirements and definitions 8pp
Amendment 1 7 September 2006 Specifies functional requirements for radar devices which are used to measure the speed of target vehicles for law enforcement or scientific measurement. (CS-068)
AS 2900.92002 Atomic and nuclear physics (ISO 31-9:1992, ISO 31-9:1992/Amd 1:1998) 21pp
Specifies names and symbols for quantities and units of atomic and nuclear physics. (ME-071)
AS 2900.102002 Nuclear reactions and ionizing radiations (ISO 31-10:1992, ISO 31-10:1992/Amd 1:1998) 26pp
Specifies names and symbols for quantities and units of nuclear reactions and ionizing radiations. (ME-071)
Sets out requirements for corrugated cellulose-cement sheets for use primarily as roofing and wall cladding. It applies to auto-claved sheets in which the cement is partially replaced by ground silica. Appendices provide means for demonstrting compliance with this Standard and methods of test for determination of strength, water-tightness, and resistance to hot water soaking of corrugated cellulose-cement sheets. (BD-040)
11pp
Specifies procedures to be followed when using a radar device to measure the speed of targets. Requirements for training of operators and evaluations of captured images are given in appendices. (CS-068)
AS 2900.112002 Mathematical signs and symbols for use in the physical sciences and technology (ISO 31-11:1992) 27pp
9pp
Amendment 1 14 February 1994 Specifies requirements for corrugated fibre-reinforced sheets for roofing and cladding. Test methods are included in appendices. (BD-040)
109
AS/NZS 2908.2:2000
AS/NZS 2908.2:2000 Flat sheet (ISO 8336:1993)
mension, materials, etc) based on a worst case situation. (CS-062) procedure guides (GTEPGs) required when transporting dangerous goods. Information on completing and using an EPG is included. Provides alphabetical and numerical lists of dangerous goods for which EPGs and GTEPGs are available, based on the sixth edition of ADG Code. (CH-009)
14pp
Specifies the characteristics, methods of control and test, and acceptance for fibre-cement flat sheets. It covers sheets intended for external applications such as cladding facades, curtain walls, soffits, lost casing, and the like, and sheets intended for internal use such as partitions, floors, ceilings, and the like, with a wide range of properties appropriate to the type of application. This Standard is identical with ISO 8336:1993. (BD-040)
AS 29211987 Unplasticized polyvinyl chloride (UPVC) wall claddingGeneral installation requirements 5pp Available Superseded
Specifies requirements for installed UPVC cladding over either existing walls or new framework. Requirements include allowance for thermal expansion, fastener types, waterproofness, alignment, loading and resistance to soft body impact. Appendices give design information on loading and impact test method. (PL-022)
AS 2932 Aluminium oresChemical analysis AS 2932.22002 Determination of the moisture content of bulk material (ISO 9033:1989) 6pp
Sets out a method for the determination of the moisture content of aluminium ores. The method applies to the samples taken from bulk aluminium ores such as shipments and stockpiles. This Standard is an adoption with national modifications and has been reproduced from ISO 9033:1989. (MN-003)
5pp
Specifies requirements for flat fibre-reinforced sheets for both internal and external applications. (BD-040)
AS 29231987 Ambient airGuide for measurement of horizontal wind for air quality applications 13pp
Sets guidelines for measurement of horizontal wind speed and direction using rotating cup or propeller type anemometers and wind vanes. Includes performance requirements, performance monitoring procedures and an instrument calibration and maintenance program for wind instruments. Guidelines are given for the siting and installation of wind instruments to obtain the most representative wind data possible for a given situation. Errors in the measurement of wind speed are discussed. (EV-007)
AS 2909 Methods of measurement on radio receivers for various classes of emission AS 2909.41986 Radio-frequency measurements on receivers for frequency-modulated soundbroadcasting emissions (IEC 60315-4 Ed. 1.0 (1982)) 95pp
Specifies conditions and methods of measurements for the performance of a complete FM radio receiver. It is a catalogue of selected measurements but does not specify limiting values. (CT-002)
AS/NZS 2924 High pressure decorative laminatesSheets made from thermosetting resins AS/NZS 2924.1:1998 Classification and specifications (ISO 4586-1:1995)
5pp
Specifies requirements for ships' pilot ladders which are provided for pilots to embark and disembark safely. It is identical with ISO 799:1986. (ME-059)
14pp
Establishes a classification system for high-pressure decorative laminated sheets according to their performance and main recommended fields of application, including materials with special characteristics, for example postformability of defined reaction to fire. Also specifies requirements on the properties of the various types of laminate covered by this classification. For several of the properties, more than one test method for checking the requirements is given. This Standard is identical with and has been reproduced from ISO 4586-1:1995. (BD-089)
AS 29372005 Laboratory glasswareStraight-bore glass stopcocks for general purposes (ISO 4785:1997) 7pp
Adopts ISO4785:1997 to specify requirements and dimensions for glass straight-bore stopcocks for general purpose use. (CH-001)
AS 29162007 Symbols for graphic representation of coal seams and associated strata 10pp
Sets out the symbols for graphic representation of coal seams and associated strata (MN-001)
44pp
AS 2917 Copper sulfide concentrates AS 2917.11994 Determination of copper content Titrimetric methods (ISO 10258:1994)
Specifies the methods of test for determination of the properties of high-pressure decorative laminated sheets. These methods are primarily intended for testing the sheets specified in AS/NZS 2924.1:1998. This Standard is identical with and has been reproduced from ISO 4586-2:1997. (BD-089)
17pp
AS/NZS 2927:2001 The storage and handling of liquefied chlorine gas 65pp
Amendment 1 29 November 2001 Provides requirements and recommendations for the safe storage and handling of liquefied chlorine gas, in cylinders, drums and bulk, as well as requirements for ancillary equipment. (CH-009)
Specifies two titrimetric methods for the determination of the copper content of copper sulfide concentrates in the range 15 % (m/m) to 50 % (m/m), using sodium thiosulfate after separation (method 1) or without separation (method 2) of copper from interfering elements. (MN-005)
AS 29281987 Occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts (IEC 60711 Ed. 1.0 (Bilingual 1981)) 12pp
Specifies an occluded-ear simulator intended for the calibration of insert earphones in the frequency range 100 Hz to 10 000 Hz in terms of the sound pressure at the ear drum. Technically identical with IEC Publication 711. (AV-003)
21pp
Adopts ISO 10469:2006 to provide an electrogravimetric method for determining copper in copper sulphide concentrates. (MN-005)
7pp
AS 29181990 Domestic solid fuel burning appliances Installation 28pp Available Superseded
Amendment 1 4 June 1990 Specifies requirements for appliance and flue installation for solid fuel burning appliances in dwellings. Sets out alternative means of compliance via performance testing of a prototype installation or the use of prescriptive criteria (di-
Specifies the requirements for coated fabrics using natural or synthetic fibres or their blends, either in woven or knitted construction, suitable for manufacture of tarpaulins. Fabrics are classified into four classes of coated fabrics and recommended end uses are given. (TX-003)
AS 29311999 Selection and use of emergency procedure guides for the transport of dangerous goods 42pp
Provides guidance on the selection of the AS 1678 emergency procedure guides (EPGs) and group text emergency
110
AS/NZS 2947.4:1999 Test methodsInsulator strings and insulator sets (IEC 60383-2 Ed. 1.0 (Bilingual 1993)) 9pp
Specifies procedures for electrical and mechanical tests on insulators of ceramic material or glass for use on a.c. overhead power and traction lines with a nominal voltage greater than 100 Hz. This Standard applies to insulator strings and sets. This Standard is identical with and has been reproduced from IEC 60383-2:1993. (EL-010)
AS 29812008 High voltage a.c. switchgear and controlgear Vacuum interruptersHigh voltage testing Protection of personnel from x-ray emission 4pp
The Standard provides testing conditions and procedures to keep the emission of x-rays affecting personnel to acceptable limits in the carrying out of high voltage testing on vacuum interrupters and switchgear incorporating vacuum interrupters. The Standard covers factory testing, on-site commissioning, in-service testing and specifies that a chain of responsibility be established for the implementation of these procedures. (EL-007)
AS 29432007 Plastics pipes and fittings for gas reticulationPolyamide compounds 18pp
Specifies requirements for polyamide 11 (PA 11) and 12 (PA 12) compounds suitable for making polyamide pipe and fittings for gas reticulation. (PL-021)
AS/NZS 2982 Laboratory design and construction AS/NZS 2982.1:1997 General requirements 41pp
AS 2944 Plastics pipes and fittings for gas reticulation AS 2944.12007 Polyamide pipes 12pp
6pp
Specific requirements for polyamide pipes for use in gas mains and services for direct burial and reliner applications. Such pipes are intended for use in the distribution of natural gas, manufactured gas, liquefied petroleum gas (LPG) and LPG/air mixtures at pressures up to 400 kPa. (PL-021)
Sets out the minimum performance criteria for service brake systems, secondary brake systems and parking brake systems for operator-controlled, self-propelled earth-moving machines. Applies to rubber-tyred backhoe loaders, dumpers, excavators, graders, loaders, and tractors or tractor scrapers. It includes an Appendix setting out requirements for in-service testing. (ME-063)
Sets out requirements relating to the design and construction of buildings which have laboratories. It applies both to new laboratories and to where existing buildings are converted to laboratory use. Special sections are included for hazardous substances, biological laboratories, radiological, secondary school and tertiary laboratories. (BD-046)
AS 2983 Methods of test for synthetic sporting surfaces AS 2983.21988 Determination of rolling resistance Determination of the withdrawal force of tufts or loops 2pp Obsolescent
Together with the other methods in the AS 2983 series this Standard sets out test methods to determine the play characteristics of synthetic sporting surfaces. (PL-048)
6pp
Specifies requirements for moulded polyamide external fittings for use with polyamide gas pipe, suitable for operation at pressures up to and including 400 kPa. (PL-021)
3pp
Specifies requirements for brake systems that are fitted to self-propelled ride-on roller compactors. (ME-063)
AS 2945(Int)2002 Batch-type washer/disinfectors for health care facilities 26pp (Expired 9 January 2004)
Specifies requirements for batch-type washers and washer/disinfectors that accommodate, empty, flush, wash, disinfect by thermal means (if a disinfector) and either partially or totally dry surgical instruments, utensils, human waste receptacles and anaesthetic equipment (including tubing) in health care facilities. Such machines may be either single-purpose or multi-purpose types, and may be supplied either with or without a disinfecting stage or a drying stage. Many of the principles set out can be applied to larger machines such as trolley washing machines. It is not intended that such machines treat single-use equipment, endoscopes, mechanical equipment or electrical components. Guidance on informaiton that should be supplied with enquiries and orders is given in an appendix. (ME-003)
43pp
Specifies requirements for a method of manufacture of serially produced metallic and non-metallic unfired pressure vessels having a maximum volume of 500 L, and specified limits related to the vessels contents, on the product of the design pressure and the total vapour space. For such vessels, this method of manufacture based on type testing provides an alternative to the method given in AS 1210. Burst tests and other performance tests on a significant number of representative samples are used to validate design, materials and fabrication, simultaneously. (ME-001)
AS 29841987 Solar water heatersMethod of test for thermal performanceOutdoor test method 17pp Obsolescent
Sets out a method of determining the thermal performance of a solar water heater under natural outdoor conditions and prescribes a method of transforming the test results from the particular climate conditions of the test to long-term average conditions for the test location, or to other locations. (CS-028)
AS 29741987 Fluid power systems and componentsMetric portsDimensions and design (ISO 6149:1980) 2pp
Amendment 1 12 December 1988 Specifies requirements including dimensions for metric parallel-threaded ports for pressures up to 40 000 kPa. (ME-035)
AS 29461991 Suspended ceilings, recessed luminaires and air diffusersInterface requirements for physical compatibility 22pp
Specifies requirements for certain features of suspended ceilings, recessed luminaires and associated air diffusers with the object of ensuring physical compatibility when installed. Applies principally to luminaires with tubular fluorescent lamps designed for use in the most common types of suspended ceilings. Does not apply to suspended ceiling of fire-rated construction. (EL-041)
AS 29852004 Workplace atmospheresMethod for sampling and gravimetric determination of respirable dust 14pp
Specifies a gravimetric method for the collection and determination of respirable dust. The aim of this revision is to align the Standard more closely with the definition of respirable dust given in ISO 7708. (CH-031)
AS 2986 Workplace air qualitySampling and anlysis of volatile organic compounds by solvent desorption/gas chromatography AS 2986.12003 Pumped sampling method (ISO 16200-1:2001)
AS/NZS 2947 InsulatorsPorcelain and glass for overhead power linesVoltages greater than 1000 V a.c. AS/NZS 2947.1:1999 Test methodsInsulator units (IEC 60383-1 Ed. 4.0 (Bilingual 1993)) 53pp
Specifies procedures for electrical and mechanical tests on insulators of ceramic material or glass for use on a.c. overhead power and traction lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz. This Standard applies to string insulator units, pin insulators, line post insulators, shackle insulators and insulator units for overhead traction lines. This Standard is based on but not equivalent to, and has been reproduced from, IEC 60383-1:1993. (EL-010)
7pp
Specifies constructional and test requirements for two classes of insulating mats. The covers may be for general purpose use or restricted to use indoors and are intended to protect personnel where there is the possibility of contact with the conductors of electrical equipment. (EL-004)
27pp
Gives guidance for the sampling and analysis of volatile organic compounds using pumped sampling. This Standard is identical with and has been reproduced from ISO 16200-1:2001. (CH-031)
22pp
Specifies requirements for tubular steel mast arms that are designed to support traffic signal lanterns and associated equipment above the roadway. Also applies to joint-use mast arms that, in addition to supporting traffic signal lanterns, are designed to support road lighting luminaires. Designates specific types of mast arms based on design and constructional considerations. Does not apply to traffic signal posts, requirements for which are specified in AS 2339. (LG-006)
32pp
Gives guidance for the sampling and analysis of volatile organic compounds using diffusive sampling. This Standard is identical with and has been reproduced from ISO 16200-2:2000. (CH-031)
AS 2947.31995 Couplings
46pp
Specifies dimensions for the insulator coupling devices used with insulators of ceramic material or glass on a.c. overhead power and traction lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz. It applies to insulator units, strings and sets, pin insulators, and to line post insula-
AS 2987 to 29881987 General conditions of contract for the supply of equipment with or without installation 33pp Available Superseded
Amendment 1 5 February 1988 Amendment 2 11 October 2000 Brings the Standard up to date and into reasonable alignment with AS 21241986. It is intended to cover contracts for equipment such as power station plant and similar heavy manufacturing and processing equipment, especially where the operation entails a significant period of time be-
111
AS 2987 to 29881987 (Reusable PDF) General conditions of contract for the supply of equipment with or without installation 33pp Available Superseded
Brings the Standard up to date and into reasonable alignment with AS 21241986. It is intended to cover contracts for equipment such as power station plant and similar heavy manufacturing and processing equipment, especially where the operation entails a significant period of time between placing of order, delivery of various components, assembly testing and commissioning. A variation of the Standard is being drawn up by the committee to cover supply only situations.
AS/NZS 3004 Electrical installationsMarinas and recreational boats AS/NZS 3004.1:2008 Marinas 21pp
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules) 290pp Available Superseded
Amendment 1 25 September 2001 Amendment 2 5 April 2002 Amendment 3 17 July 2003 Provides requirements for the selection and installation of electrical equipment, design and testing of electrical installations, especially with regard to the essential requirements for safety of persons and livestock from physical injury, fire or electric shock. Many of the prescriptive work practices contained in previous editions of AS 3000 have been removed and this Standard incorporates internationally accepted practices. (EL-001)
Specifies requirements for electrical installations associated with marinas supplied at low-voltage a.c. supply systems (i.e. exceeding 50 V a.c. but not exceeding 1 000 V a.c.). (EL-001)
63pp
AS 29871987 General conditions of contract for the supply of equipment with or without installation Available Superseded
Brings the Standard up to date and into reasonable alignment with AS 21241986. It is intended to cover contracts for equipment such as power station plant and similar heavy manufacturing and processing equipment, especially where the operation entails a significant period of time between placing of order, delivery of various components, assembly testing and commissioning. A variation of the Standard is being drawn up by the committee to cover supply only situations. (MB-010)
Specifies requirements for electrical installations on small boats (viz boats with a maximum length of 50 m). (EL-001)
AS/NZS 3000T (H) Set:2008 AS/NZS 3000, Wiring Rules (Hardbound) + Electrical Standards + FREE T-shirt 526pp AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt 526pp AS/NZS 3001:2008 Electrical installationsTransportable structures and vehicles including their site supplies 39pp
This Standard sets out requirements for electrical installations associated with transportable structures and vehicles intended for connection to low-voltage a.c. supply systems (i.e. exceeding 50 V a.c. but not exceeding 1 000 V a.c.). For the purposes of this standard the term transportable structure includes vehicles and structures with or without wheels that are capable of being readily moved from one site to another either under their own motive power or otherwise. (EL-001)
AS 2987/A1987 Annexure to the Australian Standard for conditions of contract for supply and erection of equipment 200pp
(MB-010)
AS 3007 Set2007 Electrical installations for surface mines Set 156pp AS 3007 Electrical installationsSurface mines and associated processing plant AS 3007.12004 Scope and definitions 10pp
AS 2987/B1987 Annexure to the Australian Standard for conditions of contract for supply and erection of equipment 50pp
(MB-010)
AS 29881987 Form of formal instrument of agreement AS 2991 AcousticsMethod for the determination of airborne noise emitted by household and similar electrical appliances
Sets out the scope of the AS3007 series of Standards and provides definitions for some of the terms used. (EL-023)
1p
(MB-010)
49pp
AS 2991.21991 Particular requirements for dishwashers (IEC 60704-2-3 Ed. 1.0 (Bilingual 1987)) 9pp
Sets out objective methods of engineering accuracy for determining sound power levels of airborne noise emitted by dishwashers within the specified frequency range of interest. (AV-007)
AS/NZS 3001:2001 Electrical installationsRelocatable premises (including caravans and tents) and their site installations 26pp Available Superseded
Specifies requirements, in addition to those of AS/NZS 3000:2000, for electrical installations in relocatable premises, including caravans and tents, and in caravan parks and camping areas. (EL-001)
Provides measures which are required for protection against electric shock in normal service from direct contact with live parts, for protection against electric shock from parts which may become live in the case of a fault, and for protection against the effects of overcurrent and fault current resulting from overload or short-circuit conditions. Includes requirements for the selection of protective devices and protection systems. (EL-023)
AS 2993 Vibration and shockDynamic characteristics of the human body AS 2993.11987 Driving point impedance of the human body (ISO 5982:1981) 9pp
Defines the mechanical characteristics of the human body in the form of whole body mechanical input impedance. (AV-010)
AS/NZS 2994:2000 Information technologyOpen Systems InterconnectionNetwork service definition (ISO/IEC 8348:1996, ISO/IEC 8348:1996/Amd 1:1998, ITU-T X.213) 61pp
Specifies the network service definition as used by OSI systems. This Standard is identical with and has been reproduced from ISO/IEC 8348:1996 and ISO/IEC 8348:1996/Amd 1:1998. (IT-001)
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) 463pp
The presentation of this edition differs from previous editions of AS/NZS 3000 in that the Standard comprises two parts but with both parts bound as one document. Part 1
AS/NZS 3003:2003 Electrical installationsPatient treatment areas of hospitals and medical, dental practices and dialyzing locations 57pp
Specifies requirements, in addition to those AS/NZS 3000 for electrical installations in hospitals and medical and dental practices where electromedical procedures are performed on a regular basis. In addition, specifies requirements for cardiac-protected and body-protected electrical areas. Included in the appendices are typical forms for
9pp
Provides requirements for the normal operating procedures which should be carried out to ensure the safety of personnel. Includes measures relating to control of access to operating areas, work in the vicinity of exposed live parts, and the movement of vehicles and machinery in the vicinity of overhead lines. (EL-023)
112
26pp
AS/NZS 3085 Telecommunications installations Administration of communications cabling systems AS/NZS 3085.1:2004 Basic requirements 38pp
Sets out requirements for the installation and operation of electric fences and the connection to associated equipment both outdoors and indoors. (EL-021)
AS/NZS 3015:2004 Electrical installationsExtra-low voltage d.c. power supplies and service earthing within public telecommunications networks 50pp
Provides requirements for telecommunications ELV d.c. power supplies in restricted access locations of premises that are used by licensed public telecommunications carriers in the provision of public telecommunications networks. It also provides the essential requirements for personal safety and safety from fire while maintaining the viability of the public telecommunications network. (EL-001)
AS/NZS 3008.1.2:1998 Cables for alternating voltages up to and including 0.6/1 kVTypical New Zealand installation conditions 92pp
Sets out the procedures to be followed for the selection of cables to satisfy typical New Zealand installation conditions where the ambient air temperature is 30C and ambient soil temperature is 15C. Criteria given are current-carrying capacity, voltage drop and short-circuit temperature rise. (EL-001)
Provides building owners and managers, and those who are required to meet cabling requirements (e.g. installers), with a set of basic specifications for identification and recording of components at the time of installation to aid in administration of application, maintenance and reconfiguration (if necessary) of telecommunications cabling infrastructure. (CT-001)
AS/NZS 3100:2002 Approval and test specificationGeneral requirements for electrical equipment 100pp
Amendment 1 14 November 2003 Amendment 2 9 July 2004 Amendment 3 25 November 2005 Describes the general safety requirements for, or with respect to, equipment (including fittings, accessories, appliances and apparatus) of classes and types that are used in, or intended for use in, or in connection with, electrical installations in buildings, structures, and premises. (EL-002)
14pp
Amendment 1 14 November 2003 Amendment 2 31 October 2008 Specifies essential safety requirements for approval and test purposes. This Standard is to be read in conjunction with AS/NZS 3100. (EL-002)
24pp
AS/NZS 3105:2007 Approval and test specificationElectrical portable outlet devices 12pp
Specifies essential safety requirements for electrical portable outlet devices (EPOD). To be read in conjunction with AS/NZS 3100. (EL-004)
Specifies the minimum safety requirements related to the use of generating sets for the supply of electricity at voltages normally exceeding 50 V a.c. or 120 V d.c. Applies to electricity generating sets that are driven by internal combustion engines and that are used for the supply of electrical installations in buildings or items of equipment. (EL-001)
AS 3011 Electrical installationsSecondary batteries installed in buildings AS 3011.11992 Vented cells 6pp
Specifies requirements for the installation of vented secondary batteries permanently installed in buildings. (EL-005)
7pp
Specifies requirements for the installation of sealed secondary batteries permanently installed in buildings. (EL-005)
AS/NZS 3080:2003 Telecommunications installationsGeneric cabling for commercial premises (ISO/IEC 11801:2002, MOD) 132pp
Provides building owners, managers, architects, designers, manufacturers, installers, maintainers and users with requirements to ensure compatibility with equipment and services and to ensure performance of infrastructure to meet present and foreseeable future requirements. (CT-001)
AS/NZS 3013:2005 Electrical installationsClassification of the fire and mechanical performance of wiring system elements 40pp
Sets out a classification scheme for wiring systems according to their resistance to the hazards of fire and mechanical damage. Type tests to verify the level of protection provided by a wiring system are given. Intended for reference in other Standards which specify wiring systems with a degree of resistance to damage from fire or mechanical impact. (EL-037)
AS/NZS 3084:2003 Telecommunications installations Telecommunications pathways and spaces for commercial buildings (ISO/IEC 18010:2002) 77pp
Amendment 1 16 May 2007 Specifies practices to assist architects, planners, designers, engineers, builders, installers, maintenance personnel, building owners, managers and users in the planning of physical pathways and spaces in and between buildings to accommodate the equipment and cabling infrastructure necessary for communications. (CT-001)
6pp
Specifies essential safety requirements for normal bayonet lampholder adaptors for approval and test purposes. It is intended to be read in conjunction with AS 3100. (EL-041)
AS/NZS 3013:1995 Electrical installationsClassification of the fire and mechanical performance of wiring systems 29pp Available Superseded
Sets out a classification scheme for wiring systems according to their resistance to the hazards of fire and mechanical damage. Type tests to verify the level of protection provided by a wiring system are given. Intended for reference in other Standards which specify wiring systems with a de-
AS 30841993 Telecommunications installations Telecommunications pathways and spaces for commercial buildings 54pp Available Superseded
Based on the USA standard EIA/TIA 569, this Standard specifies provisions to be made in the design and construction of commercial buildings in order to accommodate and provide ready access to telecommunications infrastructure and facilities appropriate to typical client needs, with some allowance for future expansion. (CT-001)
113
AS/NZS 3122:2005
AS/NZS 3122:2005 Approval and test specificationSocket-outlet adaptors 9pp
Specifies essential safety requirements for socket-outlet adaptors for approval and test purposes. It is intended to be read in conjunction with AS/NZS3100. (EL-004)
AS/NZS 3200 Medical electrical equipment AS/NZS 3200.1.0:1998 General requirements for safetyParent Standard (IEC 60601-1 Ed. 2.0 (Bilingual 1988)) 195pp
Specifies general requirements for safety of electromedical equipment. It is a base specification in the AS/NZS 3200 series; it becomes a complete specification for an individual item of electromedical equipment. It specifies the degrees of isolation of applied parts from both live parts and earth, sufficient to ensure the safety of the patient from electric shock made under conditions likely to be experienced in services. This revision provides a consolidated version of AS 3200.1.01990 (NZS 6150:1990) incorporating its Amendments 1, 2 and 3. Users of AS 3200.1.01990 and its Amendments 1, 2 and 3 are informed that changes in this consolidated edition are limited to the designation, title and presentation. This Standard is based on and has been reproduced from IEC 606011:1988 and its first and second amendments together with a ZZ appendix added for requirements specific to Australia and New Zealand. (HE-003)
AS/NZS 3123:2005 Approval and test specificationPlugs, socket-outlets and couplers for general industrial application 64pp
Specifies essential safety requirements for plugs, socketoutlets, cable couplers and appliance couplers for operation at 50 Hz, with a rated voltage not exceeding 660 V and a rated current not exceeding 315 A intended for general industrial use. It is intended to be read in conjunction with AS/NZS 3100. (EL-004)
AS 31242002 Approval and test specification for overhead line connector boxes 9pp
Amendment 1 22 February 2005 Specifies essential safety and associated requirements for the design, construction and testing of overhead line connector boxes, which must bemet before the connector boxes can be offered for sale. It is intended to be read in conjunction with AS/NZS 3100. (EL-004)
AS 31582004 Electric cablesGlass fibre insulatedFor working voltages up to and including 0.6/1 (1.2) kV 11pp
Specifies construction, dimensions and tests for cables, flexible cables and flexible cords insulated with glass fibre for working voltages up to and including 0.6/1 (1.2) kV. (EL-003)
AS/NZS 3160:2001 Approval and test specificationHand-held portable electric tools 28pp
Amendment 1 17 June 2005 Amendment 2 20 October 2006 Specifies essential safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3100. (EL-002)
AS/NZS 3128:1998 Approval and test specificationPortable lamp standards and brackets 10pp
Amendment 1 5 November 1998 Amendment 2 12 July 2002 Specifies safety requirements for approval and test purposes for electric portable lamp standards and brackets designed for direct or alternating current at low or extra-low voltages. It is to be read in conjunction with AS/NZS 3100. (EL-041)
AS/NZS 3161:2005 Approval and test specificationThermostats and energy regulators 12pp
Specifies essential safety requirements for thermostats and energy regulators for approval and test purposes. It is intended to be read in conjunction with AS/NZS3100. (EL-004)
AS/NZS 3200.1.1:1995 General requirements for safety Collateral Standard: Safety requirements for medical electrical systems (IEC 60601-1-1 Ed. 1.0 (Bilingual 1992)) 19pp
Amendment 1 5 August 1997 Applies to the safety of medical electrical systems. It describes the safety requirements for these systems necessary to provide protection to the patient and operator. This Standard is supplementary to AS 3200.1.01990, and is identical with and has been reproduced from IEC 60601-1-1:1992. (HE-003)
AS/NZS 3166:1993 Approval and test specificationCables for high voltage luminous discharge tube installations 5pp
Specifies the construction, dimensions and tests for singlecore flexible cables for operation at voltages up to and including 7.5 kV to earth, used for the wiring of high voltage luminous discharge tube installations. (EL-003)
AS/NZS 3200.1.2:2005 General requirements for safety Collateral standard: Electromagnetic compatibilityRequirements and tests (INVALID IEC 60601-1-2 Ed. 2.1 (English 2004)) 96pp
Adopts IEC 60601-1-2:2004 to specify requirements and tests for electromagnetic compatibility of medical electrical equipment and medical electrical systems. (HE-003)
AS/NZS 3131:2001 Approval and test specificationPlugs and socket-outlets for stationary appliances 17pp
Specifies requirements for plugs and socket-outlets intended for the connection/disconnection of stationary appliances (such as cooking ranges, hobs and ovens) having a voltage not exceeding 500 V a.c. and a maximum current of 32 A. (EL-004)
AS/NZS 3190:2002 Approval and test specificationResidual current devices (current-operated earth-leakage devices) 38pp
Amendment 1 7 November 2002 Specifies essential safety requirements for residual current devices for approval and test purposes. It is to be read in conjunction with AS/NZS 3100. (EL-004)
19pp
AS/NZS 3200.1.3:1996 General requirements for safety Collateral Standard: Requirements for radiation protection in diagnostic X-ray equipment (IEC 60601-1-3 Ed. 1.0 (Bilingual 1994)) 51pp
Specifies protective measures to be taken by manufacturers in the design and construction of equipment and its subassemblies. This Standard is supplementary to AS 3200.1.01990, and is technically equivalent to and reproduced from IEC 601-1-3:1994 with the addition of an appendix which lists Australian/New Zealand requirements. (HE-003)
Specifies construction, dimensions and tests for flexible cords insulated with thermoplastic or cross-linked PVC, cross-linked elastomers, or cross-linked polyolefin which, dependent on cord type, are designed for working voltages up to and including 250/250 V, 250/440 V or 0.6/1 kV. (EL-003)
4pp
16pp
Specifies essential safety requirements and tests, for approval and test purposes, for semi-enclosed fuses for low voltage a.c. circuits. This Standard is to be read in conjunction with AS 3100. (EL-004)
Amendment 1 5 January 1995 Specifies essential safety requirements for shaver supply units for approval and test purposes. It is intended to be read in conjunction with AS 3100. (EL-004)
AS/NZS 3200.1.4:1997 General requirements for safety Collateral Standard: Programmable electrical medical systems (IEC 60601-1-4 Ed. 1.0 (Bilingual 1996)) 26pp
Specifies requirements for the process by which a programmable electrical medical system is designed. This Standard is supplementary to AS 3200.1.01990, and is identical with and reproduced from IEC 606011-4:1996. (HE-003)
AS/NZS 3136:2001 Approval and test specificationElectrical equipment for spa and swimming pools 16pp
Amendment 1 12 November 2001 Amendment 2 17 June 2005 Specifies electrical safety requirements, to be read in conjunction with NZS/AS 3100. Applies to spa-bath, spa pool and swimming pool pumps, heaters, blowers, chlorinators, chemical injection equipment, and control equipment. Does not apply to luminaires, nor to equipment for aquariums (see AS/NZS 3192) or fountains. Note: Further regulatory requirements apply; consult NZECP 2, issued by the Chief Electrical Inspector, Ministry of Commerce. (EL-002)
AS/NZS 3197:2005 Approval and test specificationPortable electrical control or conditioning devices 13pp
Amendment 1 6 February 2007 Specifies essential safety requirements for portable electrical control or conditioning devices for approval and test purposes. It is intended to be read in conjunction with AS/NZS 3100. (EL-004)
AS/NZS 3200.1.8:2005 General requirements for safety Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems (IEC 60601-1-8 Ed. 1.0 (English 2003)) 72pp
Adopts IEC60601-1-8:2003 to specify requirements for alarm systems and alarm signals in medical electrical equipment and medical electrical systems. Also provides guidance for the application of alarm systems. (HE-003)
114
AS/NZS 3200.2.9:1997 Particular requirements for safetyPatient contact dosemeters used in radiotherapy with electrically connected detectors (IEC 60601-2-9 Ed. 2.0 (Bilingual 1996)) 9pp
Specifies safety requirements for the design and manufacture of patient contact dosemeters used in radiotherapy with electrically connected detectors. This Standard is to be read in conjunction with AS 3200.1.01990. It is identical with and reproduced from IE C 601-2-9:1996. (HE-003)
conjunction wit h AS 3200.1.01990. It is based on and reproduced from IEC 601-2-18:1996 and include s the full technical text of that Standard. An Appendix ZZ specifies additional requiremen ts applicable in Australia and New Zealand. (HE-003)
AS/NZS 3200.2.21:1994 Particular requirements for safetyInfant radiant warmers (IEC 60601-2-21 Ed. 1.0 (Bilingual 1994)) 25pp
Amendment 1 5 May 1998 Applies to infant warmers using a radiant heating source. The device is intended to maintain the thermal balance of an infant patient by direct radiation of energy in the infra-red region of the electromagnetic spectrum. This Standard is to be read in conjunction with AS 3200.1.01990. It is identical with and reproduced from IEC 601-2-21:1994. (HE-003)
AS/NZS 3200.2.2:1999 Particular requirements for safetyHigh frequency surgical equipment (IEC 60601-2-2 Ed. 3.0 E (1998)) 36pp
Specifies requirements for the safe design and manufacture of high frequency surgical equipment. This Standard modifies and has been reproduced from IEC 60601-2-2:1998 with a ZZ Appendix for additional Australian and New Zealand requirements. A thorough working knowledge of its Parent Standard, AS/NZS 3200.1.0:1998, or a readily available copy, is necessary to deal with some of the technical issues raised. (HE-003)
AS/NZS 3200.2.11:1999 Particular requirements for safety Gamma beam therapy equipment (IEC 60601-2-11 Ed. 2.0 (Bilingual 1997)) 42pp
Specifies requirements for the safety of gamma beam therapy equipment used in medical practices on human patients. This Standard is identical with and has been reproduced from IEC 60601-2-11:1997. This Standard refers extensively to its Parent Standard, AS/NZS 3200.1.0. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this Part. (HE-003)
AS/NZS 3200.2.22:1997 Particular requirements for safety Diagnostic and therapeutic laser equipment (IEC 60601-2-22 Ed. 2.0 (Bilingual 1995)) 22pp
Specifies particular requirements for the safety of laser equipment for medical applications classified as Class 3B or Class 4 laser product. This Standard is to be read in conjunction with AS 3200.1.01990, and is technically equivalent to IEC 602-2-22:1993 and incorporates an Appendix ZZ of additional requirements for Australia and New Zealand. (HE-003)
AS/NZS 3200.2.4:2006 Particular requirements for safety Cardiac defibrillators (IEC 60601-2-4 Ed. 2.0 (Bilingual 2002)) 53pp
Adopts IEC60601-2-4:2005 to specify requirements for the safety of cardiac defibrillators. Does not apply to implantable defibrillators, remote control defibrillators, external transcutaneous pacemakers, or separate stand alone cardiac monitors. Cardiac monitors which use separate ECG monitoring electrodes are not within the scope of the Standard unless they are used as the sole basis for AED rhythm recognition detection or beat detection for synchronized cardioversion. (HE-003)
AS/NZS 3200.2.13:2005 Particular requirements for safety Anaesthetic systems (IEC 60601-2-13 Ed. 3.0 (English 2003)) 38pp
Adopts IEC60601-2-13:2003 to provide safety and essential requirements for an anaesthetic system as well as individual devices designed for use in an anaesthetic system. Does not apply to anaesthetic systems intended for use with flammable anaesthetic agents, portable anaesthetic systems for use in remote sites, open fields for rescue operations or in disaster areas, or to dental analgesia apparatus. (HE-003)
AS/NZS 3200.2.23:2001 Particular requirements for safety Transcutaneous partial pressure monitoring equipment (IEC 60601-2-23 Ed. 2.0 (English 1999)) 30pp
Specifies the particular requirements for the safety, including essential performances, of transcutaneaous partial pressure monitoring equipment, and applies to equipment used with adults, children and neonates, including their use in foetal monitoring during birth. It does not apply to haemoglobin saturation oximeters or to devices applied to surfaces of the body other than the skin. This Standartd is to be read in conjunction with AS/NZS 3200.1.0:1998. It is identical with, and reproduced from, IEC 60601-2-23:1999. (HE-003)
AS/NZS 3200.2.5:2002 Particular requirements for safety Ultrasonic physiotherapy equipment (IEC 60601-2-5 Ed. 2.0 (English 2000)) 16pp
Specifies requirements for the safety of ultrasonic physiotherapy equipment used in medical practice. It modifies, and has been reproduced from, IEC 606012-5:2000 with variations for Australia and New Zealand included in a ZZ Appendix. (HE-003)
AS/NZS 3200.2.15:1994 Particular requirements for safety Capacitor discharge X-ray generators (IEC 60601-2-15 Ed. 1.0 (Bilingual 1988)) 30pp
Applies to capacitor discharge X-ray generators operating in intermittent mode for medical radiography, in which the electrical energy for loading of the X-ray tube is completely or mainly capacitively stored at, and switched in, the high voltage circuit. This Standard is to be read in conjunction with AS 3200.1.0 1990. It is identical with and reproduced from IEC 601-2-15:1988. (HE-003)
AS/NZS 3200.2.6:2005 Particular requirements for safety Microwave therapy equipment (IEC 606012-6:1984, MOD) 14pp
Adopts IEC60601-2-6:1984 with national modifications to provide requirements for the safety of microwave therapy equipment used in medical practice. Does not apply to equipment specified for hyperthermia. (HE-003)
AS/NZS 3200.2.16:1999 Particular requirements for safety Haemodialysis, haemodiafiltration and haemofiltration equipment (IEC 60601-2-16 Ed. 2.0 E (1998)) 21pp
Specifies particular requirements for the safety of haemodialysis, haemodialfiltration and haemofiltration equipment. It is identical with and reproduced from IEC 60601-2-16:1998. This Standard refers extensively to its Parent Standard, AS/NZS 3200.1.0:1998. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this Part. (HE-003)
AS/NZS 3200.2.24:1999 Particular requirements for safety Infusion pumps and controllers (IEC 60601-2-24 Ed. 1.0 (English 1998)) 60pp
Provides particular requirements for the safety of infusion pumps, infusion controllers syringe pumps and pumps for ambulatory use. A thorough working knowlege of its parent Standard, AS/NZS 3200.1.0:1998, or a readily available copy, is necessary to deal with some of the technical issues raised. This Standard is technically equivalent to and has been reproduced from IEC 60601-2-24:1998. It includes an Appendix ZZ, of additional requirements specific to Australia and New Zealand. (HE-003)
AS/NZS 3200.2.7:1999 Particular requirements for safetyHigh voltage generators of diagnostic X-ray generators (IEC 60601-2-7 Ed. 2.0 E (1998)) 40pp
Specifies particular requirements for the safety of high voltage X-ray generators. It is based on but not equivalent to and reproduced from IEC 60601-27:1998 with additional requirements for Australia and New Zealand provided in an appendix. This Standard refers to its Parent Standard, AS/NZS 3200.1.0:1998. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this part. (HE-003)
AS/NZS 3200.2.17:1994 Particular requirements for safety Remote-controlled automatically-driven gamma-ray afterloading equipment (IEC 60601-2-17 Ed. 1.0 (Bilingual 1989)) 22pp
Amendment 1 5 April 1997 Applies to remote-controlled automatically driven electro-medical equipment for gamma-ray therapy of human subjects using afterloading. This Standard is to be read in conjunction with AS 3200.1.01990. It is identical with and reproduced from IEC 601-217:1989. (HE-003)
AS/NZS 3200.2.25:1993 Particular requirements for safety Electrocardiographs (IEC 60601-2-25 Ed. 1.0 (Bilingual 1993)) 27pp
Specifies the particular safety requirements for electrocardiographs intended for the production of detachable electrocardiographs for diagnostic purposes. It also applies to vector-cardiographs and equipment for stress testing. This Standard is to be read in conjunction with AS 3200.1.01990, and is technically equivalent to IEC 601-2-25:1993. (HE-003)
AS/NZS 3200.2.8:1994 Particular requirements for safety Therapeutic X-ray generators (IEC 60601-2-8 Ed. 1.0 (Bilingual 1987)) 32pp
Amendment 1 5 September 1999 Applies to therapeutic X-ray generators that operate within nominal X-ray tube voltages from 10 kV to 400 kV inclusive when connected to alternating current supply mains. This Standard is to be read in conjunction with AS 3200.1.01990. It is identical with and reproduced from IEC 601-2-8:1987. (HE-003)
AS/NZS 3200.2.18:1997 Particular requirements for safety Endoscopic equipment (IEC 60601-2-18 Ed. 2.0 (Bilingual 1996)) 21pp
Specifies requirements for the safety of endoscopic equipment and its interconn ections with endoscopically-used accessories. This Standard is to be read in
AS/NZS 3200.2.26:2005 Particular requirements for safety Electroencephalographs (IEC 60601-2-26 Ed. 2.0 (English 2002)) 16pp
Adopts IEC60601-2-26:2002 to specify requirements for electroencephalographs. The Standard does not cover the special requirements for other equipment also used in electroencephalography. (HE-003)
115
AS/NZS 3200.2.26:1995
AS/NZS 3200.2.26:1995 Particular requirements for safety Electroencephalographs (IEC 60601-2-26 Ed. 1.0 (Bilingual 1994)) 20pp Available Superseded
Specifies particular requirements for the safety of electroencephalographs in addition to the general requirements of the parent Standard AS 3200.1.01990 (NZS 6150:1990). This Standard is to be read in conjunction with AS 3200.1.01990. It is identical with and reproduced from IEC 601-2-26:1994. It includes an Appendix, ZZ, of additional requirements specific to Australia and New Zealand. (HE-003)
AS/NZS 3200.2.32:1994 Particular requirements for safety Associated equipment of X-ray equipment (IEC 60601-2-32 Ed. 1.0 (Bilingual 1994)) 15pp
Applies to equipment and devices associated with Xray equipment for supporting and positioning the functional components used for the application of the X-radiation. This Standard is to be read in conjunction with AS 3200.1.01990. It is identical with and reproduced from IEC 601-2-32:1994. (HE-003)
AS/NZS 3200.2.38:1997 Particular requirements for safety Electrically operated hospital beds (IEC 60601-2-38 Ed. 1.0 (Bilingual 1996)) 31pp Available Superseded
Specifies safety requirements for the design and manufacture of electrically ope rated hospital beds. This Standard is to be read in conjunction with AS 3200.1.01990. It is identical with and reproduced from IEC 601-2-38:1996 (HE-003)
AS/NZS 3200.2.27:1996 Particular requirements for safety Electrocardiographic monitoring equipment 26pp
Specifies the particular safety requirements for electrocardiographic (ECG) monitoring equipment, excluding certain types of ambulatory and telemetric devices. This Standard is to be read in conjunction with AS 3200.1.01990, and is technically equivalent to IEC 601-2-27:1994. It includes Appendix ZZ, which details variations to the application of the Standard in Australia and New Zealand. (HE-003)
AS/NZS 3200.2.33:2005 Particular requirements for safety Magnetic resonance equipment for medical diagnosis (IEC 60601-2-33 Ed. 2.0 (English 2002)) 77pp
Adopts IEC 60601-2-33:2002 to specify requirements for magnetic resonance equipment and magnetic resonance systems. Does not cover the application of magnetic resonance equipment beyond the intended use. (HE-008)
AS/NZS 3200.2.39:2001 Particular requirements for safety Peritoneal dialysis equipment (IEC 60601-2-39 Ed. 1.0 E (1999))
9pp
Specifies requirements for the design and manufactrure of electrically safe peritoneal dialysis equipment. This Standard is identical with and reproduced from IEC 60601-2-39:1999. (HE-003)
AS/NZS 3200.2.28:1994 Particular requirements for safetyX-ray source assemblies and X-ray tube assemblies for medical diagnosis generators (IEC 60601-2-28 Ed. 1.0 (Bilingual 1993)) 16pp
Applies to X-ray source assemblies and X-ray tube assemblies for medical diagno sis and to components thereof, specified for use in medical X-ray equipment including equi pment for computed tomography incorporating a specified high voltage generator complying with AS/NZS 3200.2.7:1994 or AS/NZS 3200.2.15:1994. This Standard is to be read in c onjunction with AS 3200.1.01990. It is identical with and reproduced from IEC 601-2-28:1 993. (HE-003)
AS/NZS 3200.2.33:1996 Particular requirements for safety Magnetic resonance equipment for medical diagnosis (IEC 60601-2-33 Ed. 1.0 (Bilingual 1995)) 52pp Available Superseded
Specifies requirements for the safe use of magnetic resonance equipment to provide safety for the patient, the operator and others within the area affected by the equipment. This Standard is to be read in conjunction with AS 3200.1.01990. It is identical with and reproduced from IEC 601-2-33:1995. (HE-003)
AS/NZS 3200.2.40:1999 Particular requirements for safety Electromyographs and evoked response equipment (IEC 60601-2-40 Ed. 1.0 (Bilingual 1998)) 13pp
Specifies safety requirements for the design and manufacture of electromyographs and evoked response equipment. It is identical with and has been reproduced from IEC 60601-2-40:1998. This Standard refers extensively to its Parent Standard, AS/NZS 3200.1.0. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this Part. (HE-003)
AS/NZS 3200.2.34:1996 Particular requirements for safetyDirect blood-pressure monitoring equipment (IEC 60601-2-34 Ed. 1.0 (Bilingual 1994)) 23pp
Specifies medical electrical equipment, including transducers, used for monitoring and recording the internal blood-pressure of patients. This Standard is to be read in conjunction with AS 3200.1.01990. It is identical with and reproduced from IEC 601-234:1994. (HE-003)
AS/NZS 3200.2.41:2002 Particular requirements for safety Surgical luminaires and luminaires for diagnosis (IEC 60601-2-41 Ed. 1.0 (English 2000)) 33pp
Specifies the requirements to be applied to surgical luminaires and luminaires for diagnosis. Does not apply to headlights, endoscopes, laparoscopes and their light sources, luminaires used in dentistry, luminaires for general purposes and luminaires of an emergency lighting. This Standard is to be read in conjunction with AS/NZS 3200.1.1:1998. It modifies, and has been reproduced from, IEC 60601-2-41:2000 with variations for Australia and New Zealand included in an Appendix. (HE-003)
AS/NZS 3200.2.29:2000 Particular requirements for safety Radiotherapy simulators (IEC 60601-2-29 Ed. 2.0 (Bilingual 1999)) 26pp
Specifies requirements for the safe design and manufacture of radiotherapy simulators. A thorough knowledge, or a readily available copy of the parent Standard, AS/NZS 3200.1.0:1998, is necessary to deal with some of the technical issues raised. This Standard has been reproduced from IEC 60601.2.29:1999, but includes a ZZ Appendix of supplementary requirements for Australia and New Zealand. (HE-003)
AS/NZS 3200.2.35:1999 Particular requirements for safety Blankets, pads and mattresses intended for heating in medical use (IEC 60601-2-35 Ed. 1.0 (Bilingual 1996)) 44pp
Specifies safety requirements for the design and manufacture of blankets, pads and mattresses, intended for heating in medical use. It is identical with and has been reproduced from IEC 60601-2-35:1996. This Standard refers to its Parent Standard, AS/NZS 3200.1.0:1998. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this part. (HE-003)
AS/NZS 3200.2.43:2002 Particular requirements for safetyX-ray equipment for interventional procedures (IEC 60601-2-43:2000, MOD) 31pp
Applies to X-ray equipment declared by the manufacturer to be suitable for prolonged radioscopically guided interventional procedures. Does not apply to equipment for radiotherapy, equipment for computed tomography, accessories intended to be introduced into the patient, and mammographic X-ray equipment. This Standard modifies, and has been reproduced from, IEC 60601-2-43:2000 with variations for Australia and New Zealand included in a ZZ Appendix. (HE-008)
AS/NZS 3200.2.30:2001 Particular requirements for safety Automatic cycling non-invasive blood pressure monitoring equipment (IEC 60601-2-30 Ed. 2.0 (English 1999)) 40pp
Specifies the particular requirements for the safety, including essential performances, of automatic cycling non-invasive blood pressure monitoring equipment, which may be attended or unattended. It does not apply to blood pressure measuring equipment which uses finger transducers or to semi-automatic blood pressure measuring equipment, typically in which each determination needs to be initiated manually. This Standard is to be read in conjunction with AS/NZS 3200.1.0:1998. It modifies and has been reproduced from IEC 60601-2-30:1999 with variations for Australia and New Zealand included in Appendix ZZ. (HE-003)
AS/NZS 3200.2.36:1998 Particular requirements for safety Extracorporeally induced lithotripsy (IEC 60601-2-36 Ed. 1.0 (Bilingual 1997)) 14pp
Specifies safety requirements for the design and manufacture of devices (lithotripters) intended to generate acoustic pulses from outside the human body for the purpose of fragmenting calculi ('stones') within the body. This Standard is to be read in conjunction with AS 3200.1.01990. It is identical with and reproduced from IEC 60601-2-36:1997. (HE-003)
AS/NZS 3200.2.44:2005 Particular requirements for safetyX-ray equipment for computed tomography (IEC 60601-2-44 Ed. 2.1 (English 2002)) 31pp
Adopts IEC 60601-2-44, Ed. 2.1(2002) to specify requirements for X-ray equipment for computed tomography (CT Scanners). Includes safety requirements for the X-ray generator and those where high voltage generators are integrated with an X-ray tube assembly. (HE-008)
AS/NZS 3200.2.31:1996 Particular requirements for safety External cardiac pacemakers with internal power source (IEC 60601-2-31 Ed. 1.0 (Bilingual 1994)) 27pp
Amendment 1 5 March 1999 Specifies the particular safety requirements for external pacemakers used to pace patients prior to the implanting of an internal pacemaker or for temporary pacing related to other medical procedures. This Standard is to be read in conjunction with AS 3200.1.0 1990. It is identical with and reproduced from IEC 601-2-31:1994. (HE-003)
AS/NZS 3200.2.38:2007 Particular requirements for safety Electrically and manually operated medical beds for adult use (IEC 60601-2-38, Ed.1.0(1996) MOD) 44pp
Adopts IEC 60601-2-38 with national modifications to specify requirements for the design, manufacture and safety of electrically operated and manually operated medical beds for adult use in a full range of environments. (HE-027)
AS/NZS 3200.2.44:2000 Particular requirements for safetyX-ray equipment for computed tomography (IEC 60601-2-44:1992, IEC 60601-244:1992/Amd.1:1998) 15pp Available Superseded
Specifies a method of determining the total rediated acoustic power of ultrasonic transducers being used to test the calibration of ultrasound physiotherapy equipment. This Standard is identical with and has been reproduced from IEC 60601-2-44:1992 and its first Amendment (1998). (HE-003)
116
AS/NZS 3350.2.2:2001 Particular requirements for vacuum cleaners and water suction cleaning appliances (IEC 60335-2-2:1993, MOD) 18pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1 which, when combined, become a complete Standard for vacuum cleaners and water suction cleaning appliances. This standard is technically equivalent to and reproduced from IEC 60335-22:1993. (EL-002)
AS/NZS 3350.2.9:1999 Particular requirementsGrills, toasters and similar portable cooking appliances (IEC 60335-2-9 Ed. 4.0 (Bilingual 1993)) 27pp
Amendment 1 5 March 2001 Amendment 2 31 May 2004 Amendment 3 25 November 2005 Amendment 4 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-9:1993. (EL-002)
AS/NZS 3200.2.46:2003 Particular requirements for the safety of operating tables (IEC 60601-2-46 Ed. 1.0 (English 1998)) 13pp
Specifies safety requirements for operating tables, whether or not having electrical parts, including transporters, used for the transportation of the table top to or from the base or pedestal of an operating table with detachable table top. (HE-003)
AS/NZS 3350.2.3:1995 Particular requirementsElectric irons (IEC 60335-2-3 Ed. 4.0 (Bilingual 1993)) 13pp
Amendment 1 5 September 1997 Amendment 2 5 March 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and reproduced from IEC 335-2-3:1993. (EL-002)
AS/NZS 3350.2.10:1996 Particular requirementsFloor treatment machines and wet scrubbing machines (IEC 60335-2-10 Ed. 4.0 (Bilingual 1992)) 8pp
Amendment 1 5 December 1998 Amendment 2 12 November 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 3352-10:1992. (EL-002)
AS/NZS 3200.2.200:2005 Particular requirements for safety Oxygen concentrators for individual patient use (ISO 8359:1996) 24pp
Adopts ISO8359:1996 to specify safety requirements for continuous-flow oxygen concentrators. Does not apply to oxygen concentrators intended to supply gas to several patients via a piped medical gas installation or to those intended for use in the presence of flammable anaesthetic and/or cleaning agents. (HE-003)
AS/NZS 3350.2.4:1998 Particular requirementsSpin extractors (IEC 60335-2-4 Ed. 4.0 (Bilingual 1993)) 13pp
Amendment 1 5 March 2001 Amendment 2 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and has been reproduced from IEC 60335-24:1993. (EL-002)
AS/NZS 3350.2.11:2001 Particular requirementsParticular requirements for tumble dryers (IEC 603352-11:2000, MOD) 16pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and has been reproduced from IEC 60335-211:2000. (EL-002)
AS/NZS 3350.2.5:1995 Particular requirementsDishwashers (IEC 60335-2-5 Ed. 4.0 (Bilingual 1992)) 16pp
Amendment 1 5 September 1997 Amendment 2 5 March 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and reproduced from IEC 335-2-5:1992. (EL-002)
AS/NZS 3350.2.12:1997 Particular requirementsWarming plates and similar appliances (IEC 60335-2-12 Ed. 4.0 (Bilingual 1992)) 9pp
Amendment 1 5 December 1998 Amendment 2 12 November 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and reproduced from IEC 335-212:1992. (EL-002)
AS/NZS 3200.2.202:1996 Particular requirements for safetyInfant apnoea monitors for domestic use 15pp
Specifies general requirements for the safety of infant apnoea monitoring equip ment, for domestic use. This Standard is to be read in conjunction with AS 3200.1.01990. (HE-003)
AS/NZS 3350.2.6:2006 Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances(IEC 60335-2-6:1997, MOD) 45pp
Amendment 1 12 December 2008 This standard deals with the safety of stationary electric cooking ranges, hobs, ovens and similar appliances for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480V for other appliances. Examples of appliances which are within the scope of this standard are stationary grills; stationary griddles; pyrolytic self-cleaning ovens; induction hobs; steam ovens; the electrical part of appliances supplied with energy other than electricity. (EL-002)
AS/NZS 3200.3.1:1998 Essential performance requirements for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment (IEC 60601-3-1 Ed. 1.0 (Bilingual 1996)) 12pp
Specifies essential requirements for the performance of transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment. This Standard is to be read in conjunction with AS 3200.1.01990. It is identical with and reproduced from IEC 60601-3-1:1996. (HE-003)
AS/NZS 3350.2.13:2001 Particular requirements for deep fat fryers, frying pans and similar appliances (IEC 60335-2-13:1993, MOD) 11pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-13:1993. (EL-002)
AS/NZS 3350 Safety of household and similar electrical appliances AS/NZS 3350.1:2002 General requirements (IEC 60335-1:1991, MOD) 134pp
Amendment 1 14 November 2003 Amendment 2 31 May 2004 Amendment 3 31 January 2005 Amendment 4 30 November 2007 Deals with the safety of electrical appliances for household and similar purposes, the rated voltage of the appliances being not more than 250 V for singlephase appliances and 480 V for other appliances. (EL-002)
AS/NZS 3350.2.7:2001 Particular requirements for washing machines (IEC 60335-2-7:2000, MOD) 16pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1 which, when combined, become a complete Standard for washing machines. This Standard is technically equivalent to and reproduced from IEC 60335-2-7:2000. (EL-002)
AS/NZS 3350.2.14:1995 Particular requirementsKitchen machines (IEC 60335-2-14 Ed. 3.0 (Bilingual 1994)) 23pp
Amendment 1 5 December 1998 Amendment 2 5 April 2001 Amendment 3 23 April 2001 Amendment 4 1 August 2008 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and reproduced from IEC 335-214:1994. (EL-002)
AS/NZS 3350.2.8:1995 Particular requirementsShavers, hair clippers and similar appliances (IEC 60335-2-8 Ed. 4.0 (Bilingual 1992)) 8pp
Amendment 1 5 December 1998 Amendment 2 11 June 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 3352-8:1992. (EL-002)
AS/NZS 3350.2.15:2002 Particular requirements for appliances for heating liquids (IEC 60335-2-15:1995, MOD) 19pp
Amendment 1 14 November 2003 Amendment 2 4 December 2003 Amendment 3 25 May 2007 Deals with the safety of electrical appliances for heating liquids for household and similar purposes, their rated voltage being not more than 250 V. (EL-002)
117
AS/NZS 3350.2.16:1996
AS/NZS 3350.2.16:1996 Particular requirementsFood waste disposers (IEC 60335-2-16 Ed. 4.0 (Bilingual 1994)) 10pp
Amendment 1 5 December 1998 Amendment 2 12 November 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 3352-16:1994. (EL-002)
AS/NZS 3350.2.27:1996 Particular requirementsAppliances for skin exposure to ultraviolet and infrared radiation (IEC 60335-2-27 Ed. 3.0 (Bilingual 1995)) 17pp
Amendment 1 5 December 1998 Amendment 2 5 March 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 3352-27:1995. (EL-002)
control systems. It applies to motor-compressors tested separately, intended for household and similar appliances, by their rated voltage being not more than 250V for single-phase motor-compressors and 480V for other motor-compressors. Examples of equipment which contain motor-compressors are: refrigerators, ice makers, air-conditioners, heat pumps, and vending machines. (EL-002)
AS/NZS 3350.2.35:1999 Particular requirementsInstantaneous water heaters (IEC 60335-2-35 Ed. 3.0 (Bilingual 1997)) 15pp
Amendment 1 5 March 2001 Amendment 2 25 May 2007 Specifies particular safety requirements for approval and test purposes. The standard is to be read in conjuntion with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-35:1997. (EL-002)
AS/NZS 3350.2.17:2000 Particular requirementsBlankets, pads and similar flexible heating (IEC 60335-2-17 Ed. 1.0 (Bilingual 1998)) 45pp
Amendment 1 12 November 2001 Amendment 2 17 June 2005 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is techically equivalent to and reproduced from IEC 335-217:1998. (EL-002)
AS/NZS 3350.2.28:1996 Particular requirementsSewing machines (IEC 60335-2-28 Ed. 3.0 (Bilingual 1994)) 8pp
Amendment 1 5 December 1998 Amendment 2 12 November 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 3352-28:1994. (EL-002)
AS/NZS 3350.2.40:2001 Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:1995, MOD) 33pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-40:1995. (EL-002)
AS/NZS 3350.2.21:1999 Particular requirementsStorage water heaters (IEC 60335-2-21 Ed. 4.0 (Bilingual 1997)) 24pp
Amendment 1 5 March 2001 Amendment 2 13 May 2002 Amendment 3 15 October 2004 Amendment 4 7 April 2006 Amendment 5 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-21:1997. (EL-002)
AS/NZS 3350.2.29:2001 Particular requirements for battery chargers (IEC 60335-2-29:1994, MOD) 11pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-29:1994. (EL-002)
AS/NZS 3350.2.41:1997 Particular requirementsPumps (IEC 60335-2-41 Ed. 2.0 (Bilingual 1996)) 12pp
Amendment 1 5 April 2001 Amendment 2 23 April 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and reproduced from IEC 335-241:1996. (EL-002)
AS/NZS 3350.2.30:2007 Particular requirements for Room heaters (IEC 60335-2-30:1996, MOD) 26pp
Amendment 1 30 November 2007 Deals with the safety of electric room heaters for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Some clauses of the 2007 edition have an application date of 25 November 2007 which are indicated by a marginal bar in the appropriate place. (EL-002)
AS/NZS 3350.2.23:2001 Particular requirements for appliances for skin and hair care (IEC 60335-2-23:1996, MOD) 16pp
Amendment 1 14 November 2003 Amendment 2 31 May 2004 Amendment 3 25 May 2007 Amendment 4 30 May 2008 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and reproduced fromIEC 60335-2-23:1996. (EL-002)
AS/NZS 3350.2.43:2001 Particular requirements for clothes dryers and towel rails (IEC 60335-2-43:1995, MOD) 8pp
Amendment 1 14 November 2003 Amendment 2 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-43:1995. (EL-002)
AS/NZS 3350.2.30:1997 Particular requirementsRoom heaters (IEC 60335-2-30 Ed. 3.0 (Bilingual 1996)) 22pp Available Superseded
Amendment 1 5 January 1999 Amendment 2 5 March 2001 Amendment 3 11 June 2001 Amendment 4 14 November 2003 Amendment 5 25 November 2005 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and reproduced from IEC 335-230:1996. (EL-002)
AS/NZS 3350.2.24:2001 Particular requirements for refrigerating appliances and ice-cream appliances and ice-makers (IEC 60335-2-24:2000, MOD) 44pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This standard is an adoption with national modifications and includes the full text of IEC 60335-2-24:2000. (EL-002)
AS/NZS 3350.2.44:1999 Particular requirementsIroners (IEC 60335-2-44 Ed. 2.0 (Bilingual 1997)) 11pp
Amendment 1 13 May 2002 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-44:1997. (EL-002)
AS/NZS 3350.2.25:2001 Particular requirements for microwave ovens (IEC 60335-2-25:1996, MOD) 25pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-25:1996. (EL-002)
AS/NZS 3350.2.31:2001 Particular requirements for range hoods (IEC 60335-2-31:1995, MOD) 9pp
Amendment 1 17 June 2005 Amendment 2 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-31:1995. (EL-002)
AS/NZS 3350.2.45:1997 Particular requirementsPortable heating tools and similar appliances (IEC 60335-2-45 Ed. 2.0 (Bilingual 1996)) 15pp
Amendment 1 5 December 1998 Amendment 2 12 November 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and reproduced from IEC 335-245:1996. (EL-002)
AS/NZS 3350.2.26:1996 Particular requirementsClocks (IEC 60335-2-26 Ed. 3.0 (Bilingual 1994)) 7pp
Amendment 1 5 December 1998 Amendment 2 12 November 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 3352-26:1994. (EL-002)
AS/NZS 3350.2.32:2001 Particular requirements for massage appliances (IEC 60335-2-32:1993, MOD) 8pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-32:1993. (EL-002)
AS/NZS 3350.2.51:1998 Particular requirementsStationary circulation pumps for heating and service water installations (IEC 60335-2-51 Ed. 2.0 (Bilingual 1997)) 8pp
Amendment 1 5 April 2001 Amendment 2 12 November 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is equivalent to
34pp
Amendment 1 25 May 2007 Deals with the safety of sealed (hermetic and semihermetic) motor-compressors, and their protection and
118
AS/NZS 3350.2.52:1996 Particular requirementsOral hygiene appliances (IEC 60335-2-52 Ed. 2.0 (Bilingual 1994)) 7pp
Amendment 1 5 December 1998 Amendment 2 12 November 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 3352-52:1994. (EL-002)
AS/NZS 3350.2.78:1996 Particular requirementsOutdoor barbecues (IEC 60335-2-78 Ed. 1.0 (Bilingual 1995)) 10pp
Amendment 1 5 December 1998 Amendment 2 12 November 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 3352-78:1995. (EL-002)
AS/NZS 3350.2.61:2001 Particular requirements for thermal storage room heaters (IEC 60335-2-61:1992, MOD) 18pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-61:1992. (EL-002)
AS/NZS 3350.2.53:1998 Particular requirementsSauna heating appliances (IEC 60335-2-53 Ed. 2.0 (Bilingual 1997)) 13pp
Amendment 1 12 November 2001 Amendment 2 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and has been reproduced from IEC 60335-253:1997. (EL-002)
AS/NZS 3350.2.65:1997 Particular requirementsAir-cleaning appliances (IEC 60335-2-65 Ed. 1.0 (Bilingual 1993)) 8pp
Amendment 1 5 December 1998 Amendment 2 11 June 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and reproduced from IEC 335-265:1993. (EL-002)
AS/NZS 3350.2.79:2001 Particular requirements for high pressure cleaners and steam cleaners, for industrial and commercial use (IEC 60335-279:1995, MOD) 25pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-79:1995. (EL-002)
AS/NZS 3350.2.54:1997 Particular requirementsSurface-cleaning appliances employing liquids (IEC 60335-2-54 Ed. 2.0 (Bilingual 1995)) 6pp
Amendment 1 5 December 1998 Amendment 2 5 March 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 3352-54:1995. (EL-002)
AS/NZS 3350.2.80:1998 Particular requirementsElectric fans (IEC 60335-2-80 Ed. 1.0 (Bilingual 1997)) 8pp
Amendment 1 5 August 1999 Amendment 2 12 November 2001 Amendment 3 14 November 2003 Amendment 4 25 May 2007 Specifies particular safety requirements for electric fans for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-80:1997. (EL-002)
AS/NZS 3350.2.66:1997 Particular requirementsWater-bed heaters (IEC 60335-2-66 Ed. 1.0 (Bilingual 1993)) 13pp
Amendment 1 5 January 1999 Amendment 2 11 June 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and reproduced from IEC 335-266:1993. (EL-002)
AS/NZS 3350.2.55:1998 Particular requirementsElectrical appliances for use with aquariums and garden ponds (IEC 60335-2-55 Ed. 2.0 (Bilingual 1997)) 10pp
Amendment 1 5 April 2001 Amendment 2 12 November 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for electrical appliances for use with aquariums and garden ponds for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-55:1997. (EL-002)
AS/NZS 3350.2.73:1996 Particular requirementsFixed immersion heaters (IEC 60335-2-73 Ed. 1.0 (Bilingual 1994)) 8pp
Amendment 1 5 December 1998 Amendment 2 12 November 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 3352-73:1994. (EL-002)
AS/NZS 3350.2.81:1998 Particular requirementsFoot warmers and heating mats (IEC 60335-2-81 Ed. 1.0 (Bilingual 1997)) 17pp
Amendment 1 12 November 2001 Amendment 2 25 May 2007 Specifies safety requirements for foot warmers and and heating mats. This Standard is technically equivalent to and has been reproduced from IEC 60335-281:1997. (EL-002)
AS/NZS 3350.2.82:2000 Particular requirementsService machines and amusement machines (IEC 60335-2-82:1999, MOD) 15pp
Amendment 1 12 November 2001 Amendment 2 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is an adoption with national modifications and contains the full text of IEC 60335-2-82:1999. (EL-002)
AS/NZS 3350.2.56:1998 Particular requirementsProjectors and similar appliances (IEC 60335-2-56 Ed. 2.0 (Bilingual 1997)) 12pp
Amendment 1 5 April 2001 Amendment 2 12 November 2001 Amendment 3 25 May 2007 Specifies particular safety requirements for projectors and similar appliances for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-256:1997. (EL-002)
AS/NZS 3350.2.74:2001 Particular requirements for portable immersion heaters (IEC 60335-2-74:1994, MOD) 6pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-74:1994. (EL-002)
AS/NZS 3350.2.75:2001 Particular requirements for commercial dispensing appliances and vending machines (IEC 60335-2-75:1995, MOD) 28pp
Amendment 1 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-75:1995. (EL-002)
AS/NZS 3350.2.59:1999 Particular requirementsInsect killers (IEC 60335-2-59 Ed. 2.0 (Bilingual 1997)) 13pp
Amendment 1 11 June 2001 Amendment 2 14 November 2003 Amendment 3 25 May 2007 Specifies particular safety requirements for approval and test purposes. The Standard is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-59:1997. (EL-002)
AS/NZS 3350.2.85:1998 Particular requirementsFabric steamers (IEC 60335-2-85 Ed. 1.0 (Bilingual 1997)) 9pp
Amendment 1 5 March 2001 Amendment 2 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-85:1997. (EL-002)
AS/NZS 3350.2.76:1998 Particular requirementsElectric fence energizers (IEC 60335-2-76 Ed. 1.0 (Bilingual 1997)) 30pp
Amendment 1 5 April 2001 Amendment 2 13 May 2002 Amendment 3 25 May 2007 Specifies particular safety requirements for electric fence energizers for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is technically equivalent to and has been reproduced from IEC 60335-2-76:1997. (EL-002)
AS/NZS 3350.2.95:2000 Particular requirementsDrives for vertically moving garage doors for residential use (IEC 60335-2-95 Ed. 1.0 (Bilingual 1998)) 16pp
Amendment 1 Amendment 2 12 November 2001 25 May 2007
119
AS/NZS 3350.2.97:2000
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is an adoption with national modifications and contains the full text of IEC 60335-2-95:1998. (EL-002) and where building construction, installation, repairs, alterations or demolition of property (buildings) or civil engineering (public works) or excavations or where any other similar operations are carried out. These assemblies may be transportable (semi-fixed) or mobile. This Standard is technically equivalent to and reproduced from IEC 439-4:1990. (EL-006)
AS/NZS 3499:1997 Flexible tube connectors for water supply 9pp Available Superseded
Specifies requirements for both hot and cold water supplies with a maximum hot water temperature of 80C (allowing excursions to 95C) using metallic and non-metallic flexible tubes with end connection assemblies for above-ground application only. (WS-001)
AS/NZS 3350.2.97:2000 Particular requirementsDrives for rolling shutters, awnings, blinds and similar equipment (IEC60335-2-97:1998, MOD) 13pp Available Superseded
Amendment 1 12 November 2001 Amendment 2 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994. This Standard is an adoption with national modifications and contains the full text of IEC 60335-2-97:1998. (EL-002)
AS/NZS 3439.5:2001 Particular requirements for assemblies intended to be installed outdoors in public placesCable distribution cabinets (CDCs) for power distribution in networks (IEC 60439-5 Ed. 1.0 (Bilingual 1996), IEC 60439-5 Amd.1 Ed. 1.0 (Bilingual 1998)) 19pp
Specifies supplementary requirements for cable distribution cabinets (CDCs), which are stationary, typetested assemblies (TTA) for outdoor installation in places which are exposed to the public, but where only skilled persons have access for their use and which are for use in public three-phase systems. This Standard is identical with and has been reproduced from IEC 60439-5:1996 and incorporates Amendment 1:1998. (EL-006)
AS/NZS 3500 (Set):2003 Plumbing and drainage Set (Expired 30 April 2004) AS/NZS 3500 Plumbing and drainage AS/NZS 3500.0:2003 Glossary of terms AS/NZS 3500.0:1995 Glossary of terms Available Superseded 66pp
(WS-014)
AS/NZS 3350.2.98:1998 Particular requirementsHumidifiers (IEC 60335-2-98 Ed. 1.0 (Bilingual 1997)) 10pp
Amendment 1 5 March 2001 Amendment 2 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1. This Standard is technically equivalent to and has been reproduced from IEC 60335-298:1997. (EL-002)
81pp
4pp
Specifies requirements for bidets intended for use with douche spray below the rim of the bowl, and to bidettes that can be fitted with over-the-rim taps. (WS-003)
Specifies terms primarily intended for use in the interpretation of plumbing and drainage Standards, and covers water supply from the reticulation main into the premises, including hot water service systems, sanitary fixtures, drainage and their associated water and waste fittings, pipe systems and associated components. (WS-014)
AS/NZS 3439 Low-voltage switchgear and controlgear assemblies AS/NZS 3439.1:2002 Type-tested and partially type-tested assemblies (IEC 60439-1 Ed. 4.0 (Bilingual 1999)) 130pp
Specifies requirements for type-tested and partially type-tested low-voltage switchgear and controlgear assemblies. Specifies service conditions, construction requirements, technical characteristics and tests. This Standard contains the full text of IEC 60439-1:1999 but has been modified for Australian/New Zealand conditions. (EL-006)
AS 34951997 Authorization requirements for plumbing productsStainless steel non-pressure pipes and fittings 17pp
Specifies the requirements for pipes and fittings, for above and below ground non-pressure applications in the operating temperature range from minus 40C to 100C. (WS-002)
111pp
Amendment 1 29 November 2005 This Standard sets out the requirements for the installation of water services from the point of connection to the Network Utility's water supply or from an alternative drinking water supply to the points of discharge. This Standard applies to new installations as well as alterations, additions and repairs to existing installations. (WS-014)
71pp
AS/NZS 3439.2:2002 Particular requirements for busbar trunking systems (busways) (IEC 60439-2 Ed. 3.0 (Bilingual 2000)) 30pp
Specifies requirements for busbar trunking systems (busways) for use on systems with rated voltages up to 1000 Hz, or 1500 V d.c. Applies to busbar trunking systems and their accessories for feeding and distributing electrical power in residential, retail, public, agricultural and industrial premises. Also applies to busbar trunking systems designed to incorporate communications and/or control systems or intended to supply luminaires through tap-off units. This Standard is identical with and has been reproduced from IEC 60439-2:2000. (EL-006)
Specifies uniform requirements for the installation of water services and takes account of regulations stipulated by the Authorities responsible for the administration of water supply legislation in each State and Territory of Australia. The requirements of this Standard apply to that part of the cold water service from the point of connection to the water main up to the outlet points within the property. This Standard applies to new installations as well as alterations, additions and repairs to existing installations. (WS-014)
AS 34982003 Authorization requirements for plumbing productsWater heaters and hot-water storage tanks 26pp
Amendment 1 14 September 2005 Applies to water heaters using any type of heating, irrespective of the source of the heat energy imparted to the water, including electric resistance, gas, liquid or solid fuels, heat pumps, waste-heat recovery systems, solar energy or any other means of heating potable water. (EL-020)
AS/NZS 3439.3:2002 Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their useDistribution boards (IEC 604393:1990, MOD) 22pp
Specifies supplementary requirements to AS/NZS 3429.1 for enclosed distribution boards containing protective devices and intended for installation in places where unskilled persosns have access for their use. Reproduced from IEC 60439-3 consolidated edition 1.2, which incporporates its Amendment 1:1993 and Amendment 2:2001 into IEC 60439-3:1990. Contains variations for Australian and New Zealand conditions. (EL-006)
AS 34981995 Authorization requirements for plumbing productsWater heaters and hot-water storage tanks 4pp Available Superseded
Specifies basic safety and public health related requirements for water heaters and hot-water storage tanks that are intended for connection to a potable water supply, such as water heaters designed for connection to cold water supply mains, including storage water heaters, heat-exchange water heaters, hot-water storage tanks with an external energy source, instantaneous water heaters and boiling-water dispensers. (EL-020)
152pp
(WS-014)
AS 3439.41995 Particular requirements for assemblies for construction sites (ACS) (IEC 60439-4 Ed. 1.0 (Bilingual 1990)) 22pp
Amendment 1 5 December 1996 Applies to type-tested assemblies (TTA) intended for use on construction sites, i.e. temporary places of work to which the public do not generally have access
120
3pp
Specifies requirements for the design and construction of sanitary plumbing and drainage installations, from sanitary fixtures and appliances to an improved disposal system. (WS-014)
275pp
AS/NZS 3500.2.2:1996 Sanitary plumbing and drainage Acceptable solutions Available Superseded
129pp
Amendment 1 5 August 1999 Amendment 2 25 September 2002 Specifies the requirements for the design and installation of sanitary plumbing and sanitary drainage from the fixtures to a sewer, common effluent system or onsite disposal system, as appropriate. The Standard applies to new installations as well as alterations, additions or repairs to existing installations. (WS-014)
Amendment 1 28 November 2002 Amendment 2 15 July 2004 Amendment 3 27 February 2006 Amendment 4 27 July 2006 Specifies the requirements for the installation of hot and cold water supply, sanitary plumbing and drainage, and stormwater drainage, for domestic plumbing work associated with buildings not exceeding three floors in height. (WS-014)
AS 3512 Supplement 11995 Information processing systemsData communicationHigh-level data link control proceduresDescription of the X.25 LAPBcompatible DTE data link procedures Conformance requirements (Supplement to AS 35121987) (ISO 7776:1986/Amd 1:1992) 12pp
Specifies the static and dynamic conformance requirements and protocol implementation conformance statement for X.25 LAPB-compatible DTE data link procedures. This Standard is identical with and has been reproduced from ISO 7776:1986/Amd.1:1992. (IT-001)
AS 35011987 Parallel screw threads of Whitworth form (BSW and BSF) and associated gauges and gauging practice 39pp
Specifies thread profile and provides information on designation, thread classes, deviations and gauging. Limits of size for both coarse pitch series (BSW) and fine pitch series (BSF), together with associated tolerances, are given. It also covers screw gauges and associated setting plugs, and plain plug and calliper gauges, and includes information on types of gauges, gauge deviations and tolerances, materials and hardness, general gauge design requirements, marking, and general notes on the inspection of screw threads. Appendices give information on special threads, pitch diameter of pitch and flank angle errors, and notes on screw thread verification. (ME-028)
AS 35141987 Information processingText and office systemsStandard generalized markup language (SGML) (ISO 8879:1986) 155pp
Amendment 1 5 March 1996 Specifies the following: (a) an abstract syntax known as the Standard Generalized Markup Language (SGML). The language expresses the description of a document's structure and other attributes, as well as other information that makes the markup interpretable; (b) a reference concrete syntax that binds the abstract syntax to specific characters and numerical values, and criteria for defining variant concrete syntaxes, and (c) conforming documents in terms of their use of components of the language and systems in terms of their ability to process conforming documents and to recognize markup errors in them. The Standard also specifies how data such as images, graphics, or formatted text (not defined by the Standard) can be included in a conforming document. This Standard is identical with and reproduced from ISO 8879:1986. (IT-015)
173pp
Amendment 1 28 July 2006 Provides criteria for materials, design, installation and testing of roof drainage systems, surface drainage systems and subsoil drainage systems to a point of connection. (WS-020)
37pp
Specifies uniform requirements for the installation of stormwater plumbing and stormwater drainage up to the Regulatory Authority's point of connection. This Standard applies to new installations as well as alterations, additions and repairs to existing installations. Reference is made to the relevant Australian Standards dealing with methods for the sizing of roofwater systems. (WS-014)
AS 35031987 Whole bloodDetermination of cadmium Furnace atomic absorption spectrometric method 4pp
Sets out a furnace atomic absorption spectrometric method for determining cadmium in venous and capillary blood in the range 20 mol/L to 400 mol/L. (CH-036)
AS 3515 Gold and gold bearing alloys AS 3515.12005 Determination of gold content (less than 30%)Gravimetric (fire assay) method 18pp
Sets out gravimetric procedures for the determination of gold content in the range 0.2% to 30% in gold and gold bearing alloys with less than 2% nickel, 0.05% rhodium, 0.05% tungsten and 0.5% tin. (CH-010)
8pp
Amendment 1 5 May 2008 Sets out the requirements and performance tests for fire blankets. (FP-003)
AS 35061987 WatersDetermination of filtrable synthetic anionic surfactantsCopper-ethylenediamine flame atomic absorption spectrometric method 8pp
Sets out a flame atomic absorption spectrometric method for the determination of filtrable synthetic anionic surfactants in natural and waste waters in the range 0.02 to 0.5 mg/L (expressed as linear alkylbenzene sulphonate). (EV-008)
AS 3515.22002 Determination of gold content 30% to 99.5%Gravimetric (fire assay) method 12pp
Sets out a gravimetric procedure (fire assay) for the determination of gold content in gold and gold bearing alloys. This method is applicable to gold and gold alloys containing from 30% to 99.5% gold and less than 3% palladium, 2% nickel, 1% platinum, 0.05% rhodium and 0.05% tungsten. (CH-010)
125pp
Amendment 1 4 November 2005 This Standard sets out the requirements for the design and installation of heated water services. It includes aspects of the installation from, and including, the valve(s) on the cold water inlet to any cold water storage tank or water heater and the downstream fixtures and fittings. (WS-014)
AS 3507 Non-destructive testing AS 3507.12003 Guide to radiography for ferrous castings 35pp
Specifies methods for film radiography of whole or specified areas of ferrous casting. (MT-007)
AS 3515.32002 Determination of gold content (greater than 99.5%)Gravimetric (fire assay) method 10pp
Sets out a gravimetric (fire assay) procedure for the determination of gold content in gold alloys. This method is applicable to gold and gold alloys containing more than 99.5% gold and less than 0.05% rhodium and 0.05% tungsten. (CH-010)
100pp
Amendment 1 5 April 1996 Specifies uniform requirements for the installation of water heaters and hot water reticulation. Account has been taken of the current regulations of the water, gas and electricity supply authorities and local government bodies in each State and Territory of Australia. (WS-014)
29pp
Specifies requirements for welded carbon steel LP gas fuel vessels of total internal volume not greater than 500 L, and for welded stainless steel LP Gas Fuel vessels of total internal volume not greater than 200 L, intended for automotive installations. (ME-001)
AS 3515.42007 Determination of gold content (greater than 99.95%)Inductively coupled plasmaAtomic emission spectrometry 14pp
Sets out a procedure for indirect determination of high purity gold after determination of impurities by Inductively Coupled Plasma-Atomic Emission Spectrometry ICP-AES. The method is suitable for gold and gold alloys containing more than 99.95% gold. (CH-010)
AS/NZS 3500.4.2:1997 Hot water supply systemsAcceptable solutions 89pp Available Superseded
Amendment 1 29 October 2002 Specifies the requirements for the installation of domestic type water heaters using potable water. It in-
AS/NZS 3512:2000 Information technologyTelecommunications and information exchange between systems High-level data link control procedures Description of the X.25 LAPB-compatible DTE data link procedures (ISO/IEC 7776:1995, ISO/IEC 7776:1995/Amd 1:1996) 67pp
Specifies the protocol between data terminal equipment and data circuit-terminating equipment at data link layer level
AS 3516 Siting of radiocommunications facilities AS 3516.11988 LF, MF and HF transmitting and HF receiving facilities 41pp Available Superseded
Specifies requirements for the siting of facilities at specified geographic locations. Describes potential interference to intended activities of the facilities from
121
AS 3516.21998
existing or planned developments in terms of separation distances for control purposes. The Standard is intended to provide a basis for discussion at all levels for parties involved in the planning of radiocommunications services and potentially interfering developments, and parties concerned with the impact which the facility may have on the existing community. (RC-006)
covered in other Standards. Includes a classification system for rides and devices. (ME-051)
7pp
AS 3533.1 Supplement 12003 Design and constructionIntrinsic safety (Supplement to AS 3533.11997) 5pp
Provides guidance on assessing whether a ride or device can be deemed secured in relation to its intrinsic safety. (ME-051)
AS 3516.21998 Guidelines for fixed, mobile and broadcasting services operating at frequencies above 30 MHz 35pp Available Superseded
Recommends good practice for, and sets out the process by which, radiocommunications sites should be planned, sited, constructed and operated to meet the communications objectives of those facilities. It particularly addresses the sharing of radiocommunications sites and interference problems which could arise. It is intended to provide information to Federal, State and local government authorities, facilities planners, site planners, organizations and members of the public on the effects that existing or planned developments could be expected to have on the operation of such facilities, and vice versa. (RC-006)
Adopts ISO/IEC 7812.1:2006 to bring Australian Finance industry numbering procedures into line with the latest international practice. (IT-005)
55pp
Amendment 1 29 March 2001 Specifies requirements for the operation, maintenance, inspection and fire safety measures for fixed and portable amusement rides and devices, excluding equipment specifically covered in other Standards. (ME-051)
30pp
AS 35172007 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications 22pp
Specifies requirements for copper and copper alloy capillary fittings for use in non-pressure sanitary plumbing applications with tubes complying with AS 1432 and AS 3795 in the range of nominal sizes from DN 32 to DN 225. (WS-002)
AS 35252008 Financial transaction cardsMagnetic stripe data content for track 3 (ISO/IEC 4909:2006) 14pp
Adopts ISO/IEC 4909:2006 to align Australian usage of track 3 with the latest international practices. (IT-005)
Specifies requirements for in-service inspection of amusement rides and devices covering the scopes of different types of in-service inspections, personnel requirements and documentation. Covers post-assembly, formal set-up, daily, annual, major, designer and manufacturer stipulated, and ancillary equipment inspections. Includes requirements and recommendations for non-destructive testing carried out as part of such inspections. (ME-051)
AS 3527 Hand-operated screwdrivers and screwdriver bits AS 3527.21990 Insulated screwdrivers 3pp
AS/NZS 3518:2004 Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications 44pp
Amendment 1 18 May 2006 Specifies the performance requirements for acrylonitrile butadiene styrene (ABS) compounds (ABS 120, ABS 140 and ABS 160), pipes and fittings for the conveyance of liquids under pressure in applications above and below ground. (PL-021)
Specifies requirements for hand-operated insulated screwdrivers for work on live electrical apparatus subject to voltages up to 1000 V r.m.s., and for use with both slotted and cross-recessed fasteners. (ME-010)
17pp
Specifies the requirements and procedures necessary for machine proof grading of timber. Methods and tables allowing estimates of the required proof-stress are included. (TM-003)
AS 35341988 AcousticsMethods for measurement of airborne noise emitted by powered lawnmowers, edge and brush cutters and string trimmers 9pp
Specifies a method for the measurement of the sound level emitted by powered lawnmowers, including ride-on lawnmowers, and by edge and brush cutters and string trimmers, and of the noise heard at the operator's position and at a specified bystander's position. It applies to machines powered by electricity, including batteries, and by internal combustion engine. The Standard includes the method of calculation of sound power level. (AV-006)
5pp
AS 35201988 TextilesTarpaulins
4pp
Covers cylindrical screw threads with profiles based on triangles. Identical to ISO 5408:1983, Cylindrical screw threadsVocabulary. (ME-028)
Specifies requirements for tarpaulins and shaped covers including canopies manufactured from: (a) rot and waterresistant duck, or (b) coated fabrics made from natural or synthetic fibres. Classifies tarpaulins and shapes covers into two types depending on the material they are made from, and into four duties. Covers seams, stitching, and appurtenances such as shortening lugs, eyelets and ropes. (TX-003)
AS 35291988 SolventsToluene
Specifies requirements for nitration grade toluene.
2pp
(CH-002)
AS 3522 Identification cardsRecording technique AS 3522.62002 Magnetic stripeHigh coercivity (ISO/IEC 7811-6:2001)
23pp
AS 3533 Amusement rides and devices AS 3533.11997 Design and construction 88pp
AS 3536 Reference gases AS 3536.11998 Preparation and certification of gravimetric Standards 10pp
Sets out the method for the preparation and certification of gravimetric Standard gases for which the accuracy of concentration of each gas component is better than 0.5% relative or 0.02% absolute. (CH-027)
Specifies requirements for a high coercivity magnetic stripe on an ID card, the encoding technique and coded character sets (IT-012)
Amendment 1 29 March 2001 Specifies requirements for the design, manufacture and construction of fixed and portable amusement rides and devices, excluding equipment specifically
122
AS 35372006 Specification for general purpose corrugated fibreboard boxes and blanks 10pp
Specifies manufacturing tolerances for boxes and blanks made of corrugated fibreboard and establishes the minimum level of quality to be expected. (PK-025)
5pp
2pp
AS 35381988 TextilesMopsWet
Sets out a gravimetric method for the determination of total, fixed and volatile dissolved and suspended solids in water. The method is applicable to potable waste and saline waters at concentrations up to 40 g/L. (EV-008)
Sets out a method for determining the colourfastness to water of pigments in plastics materials used in sanitary plumbing fixtures. (WS-003)
4pp
Specifies requirements for the yarn and attachment of yarn and sets out a means for specifying the mass and type of fibre in a wet mop of the socket type or sewn type. Applicable to all wet mops made from cotton and blended polyester/cotton yarns. (TX-018)
Specifies characteristics of different types of synthetic sporting surfaces and base layers for indoor and outdoor applications. Synthetic surfaces are defined, the parameters are measured and basic safety requirements are included. (PL-048)
AS 35421996 Pleasure boatsToilet waste collection, holding and transfer systems (ISO/DIS 8099-1:1992) 5pp
Specifies requirements for the design and installation of toilet waste collection, holding and pump-out systems for pleasure boats. (CS-001)
15pp
Defines working positions for welding. Includes means to locate position of welds in space. (WD-001)
31pp
AS 3555 Building elementsTesting and rating for intruder resistance AS 3555.12003 Intruder-resistant panels 4pp
Sets out a method for the development, administration, assessment, and certification of production typing tests conducted in the English language and specifies two levels of testing, basic and advanced. The criterion for assessment is Usable Lines Produced (ULP). (MS-016)
AS 3558.121999 Determination of resistance to thermal shock of baths for ablutionary purposes 2pp
Sets out a method for determining the resistance to thermal shock of plastic baths. (WS-003)
AS 3550 Methods for the analysis of waters AS 3550.11988 Determination of dissolved sulphide Spectrophotometric method 7pp
Sets out a spectrophotometric method for the determination of dissolved sulphide in natural and waste waters in the concentration range 0.1 mg/L to 50 mg/L. (EV-008)
Sets out a method for assessing the resistance of a building element to forcible attack. The resistance to attack is assessed by categorizing the type of attack and rating the time taken to breach the building element. (MS-047)
AS 3558 Methods of testing plastics and composite materials for use in sanitary plumbing fixtures AS 3558.02006 Introduction and list of methods 2pp
This Standard lists the various test methods for plastics and composite materials used in sanitary plumbing fixtures. (WS-003)
AS 3558.141999 Determination of thermal expansion under load of baths for ablutionary purposes 2pp
Sets out a method for determining the thermal expansion under load of plastics baths. (WS-003)
3pp
Sets out a titrimetric method for determining the carbon dioxide content of waters in concentration range 1 to 100 mg/L. (EV-008)
123
AS 3558.161999
AS 3558.161999 Determination of resistance to thermal shock of washbasins 3pp
Sets out a method for determining the resistance to thermal shock of plastics washbasins. (WS-003)
ing 6.5 kL/h and which incorporate two single check valves integral with the meter one at each end of the meter for low hazard protection of potable water. (WS-024)
AS 3558.171999 Determination of impact resistance of shower bases and shower modules 2pp
Sets out a method for determining the impact resistance of plastics shower bases and shower modules. (WS-003)
Establishes a nomenclature for the repair and servicing of automatic transmissions in the automotive repair industry. (CS-078)
AS 3566 Self-drilling screws for the building and construction industries AS 3566.12002 General requirements and mechanical properties 30pp
Specifies the dimensions, thread forms, lead types, mechanical properties and performance and working requirements for self-drilling screws intended for drilling and tapping into steel and fixing to timber. (ME-029)
1p
AS 3558.181999 Determination of resistance to thermal shock of shower bases and shower modules 3pp
Sets out a method for determining resistance to thermal shock of plastics shower bases and shower modules. (WS-003)
Establishes a nomenclature for the repair and servicing of manual transmissions in the automotive repair industry. (CS-078)
AS 3564.31990 Transaxle
1p
Establishes a nomenclature for the repair and servicing of transaxles in the automotive repair industry. (CS-078)
17pp
2pp
Specifies the requirements for four levels of the corrosion resistance of self-drilling screws for the building and construction industries. (ME-029)
Sets out a terminology for describing the repair and servicing of power steering units in the automotive repair industry. It also gives guidance on records to be retained by the repair or service business and the vehicle owner. (CS-078)
AS 3564.51993 Engine
3pp
Amendment 1 5 October 1995 Sets out a terminology for describing the reconditioning and repair of reciprocating spark ignition automotive and industrial engines by the automotive repair industry. (CS-078)
AS 35681999 Oils for reducing the viscosity of residual bitumen for pavements 5pp
Provides specifiers and users of oils for the reduction of viscosity of residual bitumen for pavements with the requirements for hyrocarbon oils derived from refined crude oil. (CH-025)
10pp
Sets out a terminology for describing the repair and servicing of constant velocity joints used in automotive vehicles. (CS-078)
AS 3565 Meters for water supply AS 3565.12004 Cold water meters 52pp
71pp
AS/NZS 3560 Electric cablesCross-linked polyethylene insulatedAerial bundledFor working voltages up to and including 0.6/1(1.2)kV AS/NZS 3560.1:2000 Aluminium conductors 25pp
Describes requirements for water meters for use in cold water systems to measure the volume of cold drinking water or Type A or B recycled water using the following types of meters- (a) Volumetric, not exceeding 63 kL/h;(b) Multi-jet, not exceeding 63 kL/h;(c) Single-jet meters, not exceeding 63 kL/h; (d) Helical vane meters with permanent flow rates not exceeding 250 kL/h. The operating conditions of the meters being(i) working temperature ranges of 0.3C to 30C; and (ii) operating pressures not exceeding 1400 kPa. (WS-024)
Specifies requirements for steel wire ropes for all purposes, and includes tables giving linear mass and minimum breaking force against nominal diameter for each type of rope construction. The designation system is taken from ISO 3578. It specifies materials, manufacture, marking, packing, and test requirements. Appendices give guidelines for purchasers, and for calculation of minimum breaking force. Includes wall charts which give details of the designation system and examples of construction for the new system both full and abbreviated, and the previous Australian standard system. (ME-007)
25pp
20pp
Specifies the construction, dimensions and tests for two, three and four core aerial bundled cables having aluminium conductor sizes between 16 mm2 and 150 mm2. (EL-003)
Specifies the requirements for combination meters, with nominal flow rates not exceeding 150 kL/h and consisting of one small meter and one large meter in parallel, with a changeover device. These combination meters are intended for installation in water services, to measure within the specified accuracy limits, the volume of cold drinking water at working temperature range of 0.3C to 30C and pressure not exceeding 1400 kPa, respectively. (WS-024)
Amendment 1 5 February 1999 Sets out requirements for automotive diesel fuel (intended for use in high speed diesel engines) which would minimize engine problems, particularly cold weather starting problems. (CS-048)
AS 35711989 Glass filament reinforced thermosetting plastics (GRP) pipesPolyester basedWater supply, sewerage and drainage applications 18pp
Specifies materials, dimensions, mechanical and physical characteristics of glass filament reinforced thermosetting polyester resin pipes primarily for use in buried installations transporting water, sewage and some industrial wastes. Includes classes for working pressures up to 2.5 MPa, and diameter from 150 to 2500 mm. (PL-044)
18pp
Specifies the construction, dimensions and tests for 0.6/1 (1.2) kV rated cross-linked polyethylene insulated aerial bundled cables with two, three or four cores having hard drawn copper conductors with cross-sectional areas of 6, 10, 16 and 25 mm2. (EL-003)
AS 3572 PlasticsGlass filament reinforced plastics (GRP)Methods of test AS 3572.02002 Introduction and list of methods 2pp
24pp
Specifies the design performance, photometric, electrical and mechanical requirements for lighting equipment for bicycles intended for use on public roads. The Standard does not apply to reflectors. Includes test methods for resistance to solvents, vibration, heat, moisture and corrosion, as well as methods for determining the luminous intensity of lamps. Also includes the characteristics of some common filament bulbs. The Standard is based on ISO 6742.1. (CS-008)
20pp
Specifies requirements for the timely sampling, testing, and assessment of in-service compliance of populations of water meters and individual meters, limited to 20 mm water meters. (WS-024)
Provides a series of performance tests for GRP water pipes and fittings and chemical plant equipment for assessment by manufacturers, purchasers or any third party. (PL-044)
AS 3565.52004 Water meters with two integral single check valves 8pp
Specifies requirements for volumetric chamber and turbine meters with permanent flow rates not exceed-
124
AS 3572.142002 Determination of long-term ring deflection of glass filament reinforced plastics (GRP) pipe subject to constant load and environmental exposure 6pp
Sets out a method for determining the long-term ring deflection of glass filament reinforced plastics pipe subject to constant load and environmental exposure. (PL-044)
AS/NZS 3576:1998 Clearing saws, brushcutters and grass trimmersGuide to safe working practices 20pp
Provides recommendations for the safe use of clearing saws, brushcutters and grass trimmers. Guidelines are given covering the basic principles for the safe operation of the equipment, the training of operators, the appropriate measures and precautions to take to guard the safety and health of operators, and the general maintenance of the equipment. (SF-033)
AS 3572.42002 Determination of the dimensions of glass filament reinforced plastics pipes 4pp
Sets out a method for determining the dimensions of glass filament reinforced plastics pipes, i.e. outside diameter, wall thickness, length, inside diameter and squareness of pipe ends. (PL-044)
AS 3572.152002 Determination of resistance to long-term strain corrosion of glass filament reinforced plastics pipes 6pp
Sets out a method for determining the resistance to strain corrosion by subjecting specimens of GRP pipe to long-term ring deflection in an aggressive environment. (PL-044)
26pp
Specifies the requirements for welded carbon and stainless steel cylinders with one longitudinal joint, and two circumferential joints, of water capacity not less than 150 kg nor more than 500 kg. (ME-002)
AS 3572.52002 Determination of hoop tensile strength of wound glass filament reinforced plastics pipes 4pp
Sets out a method for determining the hoop tensile strength of filament wound pipes. (PL-044)
AS 3572.162002 Testing of flexible joints of glass filament reinforced plastics pipes 3pp
Sets out the method for conducting type tests on flexible joints. (PL-044)
AS/NZS 3580 Methods for sampling and analysis of ambient air AS/NZS 3580.1.1:2007 Guide to siting air monitoring equipment 17pp
Sets out general guidelines to the siting of air monitoring equipment and specifies a number of siting parameters for individual air pollutants. The Standard does not include the detailed design of a network of monitoring units. (EV-007)
AS 3572.62002 Determination of hoop tensile modulus of elasticity of wound glass filament reinforced plastic pipes 4pp
Sets out a method for determining the hoop tensile modulus of elasticity of filament wound glass filament reinforced pipes. (PL-044)
AS/NZS 3572.18:1997 Method for determining the ultimate tensile strength and unit modulus of flat laminates 6pp
Describes the test procedure to determine the ultimate tensile unit strength and unit modulus of flat laminates. (PL-044)
4pp
AS/NZS 3572.19:1997 Method for the determination of the lap shear strength of laminate 2pp
Describes the test procedure to determine the lap shear strength of laminate. (PL-044)
Sets out a method for the preparation of reference test atmospheres containing known concentrations of determinand(s), using a calibration gas dilution procedure. The method is suitable for preparing reference test atmospheres containing determinand(s) in the concentration range 0.01 ppm to 100 ppm by volume. (EV-007)
AS 3572.82002 Determination of long term ring stiffness of glass filament reinforced plastic pipes 6pp
Sets out a method for determining the long-term ring stiffness of glass filament reinforced plastics pipes. (PL-044)
AS/NZS 3572.20:1997 Method for the determination of the peel strength of the bond between laminate layers 2pp
Describes the test procedure to determine the peel strength of the bond between laminate layers. (PL-044)
AS 3572.92002 Determination of pressure regression characteristics as a function of time for glass filament reinforced plastic pipes 16pp
Establishes the procedure for determining linear regression coefficients of the pressure/time relationship of GRP pipes, and regression ratios based on lower confidence limits used for the determination of quality control test pressures. (PL-044)
AS/NZS 3572.21:1997 Method for the determination of the shear strength of a sandwich panel 3pp
Describes the test procedure to determine the shear strength of a sandwich panel. (PL-044)
AS/NZS 3572.22:1997 Method for the determination of hardness by means of a Barcol impressor 3pp
Describes the determination of indentation hardness of glass reinforced plastic materials using a Barcol impressor, Model No. 934-1. (PL-044)
AS 3572.102002 Determination of the initial ring stiffness of a glass filament reinforced plastics pipes 7pp
Sets out two alternative methods for determining the initial ring stiffness of glass filament reinforced plastics (GRP) pipes. Either a constant deflection or a constant load test method may be used. (PL-044)
AS/NZS 3572.23:1997 Method for the determination of the initial longitudinal tensile strength by means of a tensile plate test 3pp
Describes the test procedure to determine the initial longitudinal tensile strength of a reinforced plastics laminate of cylindrical shape by means of a tensile plate test piece. (PL-044)
AS 3572.112002 Determination of the initial ring deflection of glass filament reinforced plastics pipes 3pp
Sets out a method for determining the initial ring deflection of glass filament reinforced plastics (GRP) pipes. (PL-044)
AS/NZS 3572.24:1997 Method for the determination of the initial hoop tensile strength by means of a tensile plate test 3pp
Describes the test procedure to determine the initial hoop tensile strength of a reinforced plastics laminate of cylindrical shape by means of a tensile plate test piece. (PL-044)
AS 3572.122002 Determination of initial failure pressure and initial hoop strength of glass filament reinforced plastics pipes 11pp
Sets out four alternative methods for determining the initial failure pressure and the initial hoop strength of glass filament reinforced plastics (GRP) pipes. (PL-044)
4pp
AS 3572.132002 Determination of the initial longitudinal tensile strength of glass filament reinforced plastics pipes 5pp
Sets out two methods for determining the initial longitudinal tensile strength and percentage elongation at
Sets out a method for the determination of carbon monoxide in ambient air to a concentration of 600 mg/m3 using a direct-reading instrument. The requirements for direct-reading instruments specified in the Standard were derived from USEPA Air Regulations Pollution Control Guide, Part 53: Ambient air monitoring reference and equivalent methods, Section 8183, Subpart B: Procedures for testing performance characteristics of automated methods. (EV-007)
125
AS 3580.8.11990
AS 3580.8.11990 Determination of hydrogen sulfide Automatic intermittent samplingGas chromatographic method 3pp
Sets out a gas chromatographic method for measuring the concentration of hydrogen sulfide in ambient air using an automatic intermittent sampling procedure. The method is applicable to ambient air having a concentration of hydrogen sulfide within the approximate range 0.300 ppm to 2 ppm (5 g/m3 to 3000 g/m3) and is specific to hydrogen sulfide. (EV-007) volatile organic compounds using a direct-reading instrument. The method is applicable to air with a methane concentration in the range of 0 to 10 ppm, or nonmethane volatile organic compounds of equivalent carbon content. (EV-007)
AS 3583 Methods of test for supplementary cementitious materials for use with portland and blended cement AS 3583.11998 Determination of fineness by the 45 g sieve 5pp
Amendment 1 28 March 2007 Sets out the reference method for determination of the fineness of supplementary cementitious materials by wet sieving. (BD-031)
10pp
AS/NZS 3580.9.3:2003 Determination of suspended particulate matterTotal suspended particulate matter (TSP)High volume sampler gravimetric method 15pp
Specifies a gravimetric method for the determination of suspended particulate matter in ambient air. The method provides a measure of mean concentration of TSP over the sampling period employed. (EV-007)
Specfies a continuous direct reading instrumental method of determining light scattering produced by fine particles in a sample of ambient air. The light scattering coefficient determined by this Standard is an indicator of the perceived visual degradation caused by suspended particles in air. The method is not designed to measure light scattering due to suspended water droplets. (EV-007)
2pp
AS/NZS 3580.9.6:2003 Determination of suspended particulate matterPM10 high volume sampler with size-selective inletGravimetric method 19pp
Specifies a gravimetric method for the determination of suspended particulate matter in ambient air. The method provides a measure of mean concentration of PM[10] over the sampling period employed. (EV-007)
AS 3580.13.11993 Determination of fluoridesGaseous and acid-soluble particulate fluorides Automated, double paper tape sampling 10pp
Sets out a method for the automated collection and separation of gaseous and acid-soluble particulate fluorides in ambient air. Determination of each form of fluoride by use of an ion-selective electrode is included. (EV-007)
Describes procedures for determination of moisture content in supplementary cementitious materials for use with portland cement. (BD-031)
2pp
Describes procedures for determination of loss on ignition in supplementary cementitious materials for use with portland cement. (BD-031)
AS 3580.13.21991 Determination of fluoridesGaseous and acid-soluble particulate fluoridesManual, double filter paper sampling 8pp
Sets out a method for the collection, separation and determination of acid-soluble particulate fluorides and gaseous fluorides in ambient air. Each form of fluoride is collected on a separate filter and determined by use of an ion-selective electrode. (EV-007)
AS 3580.9.71990 Determination of suspended particulate matterPM10 dichotomous sampler Gravimetric method 7pp
Sets out a sampling procedure and a gravimetric method for the determination of suspended particulate matter in ambient air. The method provides a measure of the mean concentration of PM10 of two particle size fractions, viz. less than approximately 2.5 m and particles in the 2.5 m to 10 m size range. (EV-007)
2pp
Describes procedures for determination of relative density in supplementary cementitious materials for use with portland cement. (BD-031)
AS 35811988 Mechanical aids for patient lifting and movingSafety requirements 9pp
Specifies the minimum safety requirements for mechanical devices used in the lifting and moving of patients and other persons having temporary or permanent disabilities, and provides the relevant test methods for evaluation of the performance, stability, and mechanical strength of the equipment. (SF-021)
AS 3580.9.82008 Determination of suspended particulate matterPM10 continuous direct mass method using a tapered element oscillating microbalance analyser 14pp
(EV-007)
AS/NZS 3580.9.9:2006 Determination of suspended particulate matterPM10 low volume sampler Gravimetric method 10pp
Sets out a standard method for the determination of suspended particulate matter with an equivalent aerodynamic diameter of less than 10 (m utilizing a low volume sampler and size selective inlet. (EV-007)
AS 3582 Supplementary cementitious materials for use with portland and blended cement AS 3582.11998 Fly ash 9pp
Amendment 1 5 January 1999 Specifies the requirements for fly ash as a supplementary material for use with portland and blended cement in the manufacture of concrete and concrete products. (BD-031)
AS/NZS 3580.9.10:2006 Determination of suspended particulate matterPM 2.5 low volume sampler Gravimetric method 10pp
Sets out a standard method for determining suspended particulate matter with an equivalent aerodynamic diameter of less than 2.5 g utilizing a low volume sampler and size selective inlet. (EV-007)
9pp
This Standard sets out requirements for ground granulated iron blast-furnace slag for use as cementitious material in concrete and mortar. (BD-031)
4pp
AS/NZS 3580.9.11:2008 Determination of suspended particulate matterPM10 beta attenuation monitors 16pp
(EV-007)
Describes procedures for determination of the magnesia content in supplementary cementitious materials for use with portland cement. (BD-031)
6pp
Specifies the requirements for ground granulated iron blast furnace slag as a supplementary material for use with portland cement in the manufacture of concrete and concrete products. (BD-031)
10pp
Sets out requirements for amorphous silica as a supplementary material for use in concrete, mortar and grout. (BD-031)
9pp
4pp
AS 3580.11.11993 Determination of volatile organic compoundsMethane and non-methane volatile organic compoundsDirect-reading instrumental method 9pp
Sets out a method for continuous or intermittent sampling and determination of methane and non-methane
Specifies the requirements for silica fume as a supplementary material for use with portland cement in the manufacture of concrete and concrete products. (BD-031)
Describes procedures for determination of available alkali in supplementary cementitious materials for use with portland cement. (BD-031)
126
printouts reproduced in the Standard, together with its user manual, will be available for separate sale. (EN-001)
AS/NZS 3584 Set:2007 Diesel engine systems for underground coal mines Set 196pp AS/NZS 3584 Diesel engine systems for underground coal mines AS/NZS 3584.1:2008 Fire protectedHeavy duty 59pp
AS 35961992 Energy management programsGuidelines for definition and analysis of energy and cost savings 18pp
Provides guidelines to enable organizations to identify the most cost effective method of reducing their energy costs. The user is advised on how to assemble and formalize records of past energy consumption and costs and how to project such data to future periods of interest with variations according to different fuel tariffs. The Standard then guides the user through the preparation of energy cost and consumption forecasts in the same format as the base case projection but using data from energy use and cost saving proposals. The financial evaluation of the base case projection versus the energy saving proposals is performed by using AS 35951990 Energy management programs Guidelines for financial evaluation of a project. Typical proformas for the recording and analysis of data are given and a case history from an actual project, which demonstrates the use of the proformas and AS 35951990, is appended. (EN-001)
Specifies safety requirements for diesel engine systems that are fire-protected for use in those parts of underground coal mines where there is minimal risk of explosive gases ever being present. Requirements are also given for marking, testing and documentation. (ME-018)
84pp
Specifies safety requirements for diesel engine systems that are explosion-protected for use in underground coal mines, including use in explosion-risk zones. It implies limited time safe operation in atmospheres containing up to 1% methane. (ME-018)
AS 35972008 Structural and pressure vessel steel Quenched and tempered plate
19pp
Sets out technical requirements for the production and supply of intermediate and high-strength quenched and tempered low-alloy steel plates. (BD-023)
12pp
22pp
Specifies requirements for maintenance of diesel engine systems for underground coal mines complying with AS3584.1 and AS3584.2. Includes requirements for personnel, workshops, management systems, maintenance procedures and testing. (ME-018)
Specifies material, construction and installation requirements for shower bases and shower modules manufactured from vitreous enamelled pressed steel, non-vitreous china, plastics and composite materials. (WS-003)
AS 35971993 Structural and pressure vessel steel Quenched and tempered plate Available Superseded
14pp
AS 35852008 End fittings for synthetic flat-webbing and round slings 15pp
Specifies requirements for the manufacture, marking, and testing of metal end fittings that may be attached to the ends of flat synthetic webbing to form slings complying with AS 1353.1 or may be attached to synthetic fibre round slings complying with AS 4497.1. (ME-025)
Specifies the technical requirements for the production and supply of intermediate and high-strength quenched and tempered low-alloy steel plates from a minimum thickness of 5 mm to a maximum thickness of 110 mm for use in fusion welded structures and pressure vessels. The Standard introduces new Grades 500, 600, 700 and 700PV. (BD-023)
Specifies performance requirements for visual display units (VDUs) incorporating cathode-ray tubes. The standard does not apply to CAD units or to test equipment. Includes test methods for measuring luminance factor, display luminance, character dimensions, and geometric stability, as well as a method for determining the legibility of on screen characters, and a BASIC program to generate randomly selected alphanumeric characters. (SF-038)
22pp
Sets out requirements for the sampling of ferroalloys in particulate form from moving streams and stationary situations, including stopped-belt sampling, to provide samples for chemical analysis, physical testing and total moisture determination. (MN-006)
Sets out the requirements for commissioning and conducting energy audits, and identifying opportunities for cost effective investments, to improve efficiency and effectiveness in the use of energy. Primarily, it is intended for use by energy users but will be of assistance to energy auditors, and may serve as a useful reference document for anyone interested in the field of energy management best practice. (EN-001)
11pp
The Standard sets out guidelines for the design, evaluation, selection, and setting-up of furniture for desk top screen-based workstations in offices. The Standard does not apply to special cases such as in schools, or to CAD applications. No requirements are specified for wheelchair access. (SF-038)
AS/NZS 3599 Electric cablesAerial bundledPolymeric insulatedVoltages 6.35/11(12) kV and 12.7/22(24) kV AS/NZS 3599.1:2003 Metallic screened 19pp
8pp
Sets out methods for sampling ferroalloys in molten form, for both routine and special purposes, to provide samples for preparation for chemical analysis. (MN-006)
2pp
26pp
Sets out methods for the preparation of samples of ferroalloys collected in accordance with recognized sampling procedures. Preparation of samples for total moisture determination, chemical analysis and special tests is addressed. (MN-006)
Specifies the design requirements for conventional QWERTY keyboards for use with screen-based equipment and includes recommendations for mouse design. The Standard does not apply to split-field keyboards, or to those keyboards which utilize alternative alphanumeric key layouts. (SF-038)
Specifies the construction, dimensions, and test requirements for steel wire supported, three-core aerial bundled cable, having individually screened phase cables insulated with cross-linked polyethylene, sheathed with high density polyethylene. (EL-003)
22pp
AS/NZS 3594:1994 Information technologyTelecommunications and information exchange between systems Interface connector and contact assignments for ISDN basic access interface located at reference points S and T (ISO/IEC 8877:1992) 11pp
Specifies the 8-pole connector (including the poles/contacts assignments) for use in physical interfaces of the ISDN network. This Standard is identical with, and has been reproduced from ISO/IEC 8877:1992. (IT-001)
Specifies the construction, dimensions and test requirements for three phase, aerial bundled cables incorporating a support conductor, insulated with crosslinked polyethylene and non-metallic screened (without further protection). (EL-003)
165pp
AS 3587 FerroalloysChemical analysis AS 3587.31991 Determination of chromium content of ferrochromium and ferrosilicochromium (ISO 4140:1979) 4pp
Sets out gravimetric and potentiometric methods for the chemical analysis of ferroalloys. (MN-006)
Amendment 1 24 May 2002 Amendment 2 28 October 2004 Sets out minimum requirements for the analysis, design and construction of concrete structures and members that contain reinforcing steel up to 500 MPa, prestressing tendons or both, and includes requirements for plain concrete structures and members. Design requirements are given for the limit states of stability, strength, serviceability, durability and for resistance requirements to fire and earthquakes. Rules are also given for prototype or proof testing of finished members and structures. (BD-002)
146pp
Amendment 1 5 August 1996 Sets out minimum requirements for the analysis, design and construction of concrete structures and members which
127
(ISO 4902:1989)
18pp
Specifies the 37-pole connector and the assignment of contact numbers at the interface between data terminal equipment and data circuit-terminating equipment where CCITT Recommendations V.24, V.10, and V.11 are applicable. This Standard is identical with, and has been reproduced from, ISO 4902:1989. (IT-001)
restraint systems by testing the straps separately from other parts of the child restraint system. (CS-085)
AS 36131991 Information technologyData communications15-pole DTE/DCE interface connector and contact number assignments (ISO 4903:1989) 17pp
Specifies the 15-pole connector and the assignment of contact numbers at the interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) where CCITT Recommendations X.24, X.26, and X.27 are applicable. Provides the dimensions of the connector housing, as well as the recommended means of providing a locking device (latching block) and connector shielding. This Standard is identical with and has been reproduced from ISO 4903:1989. (IT-001)
3pp
Sets out a method of measuring the recline angle of a rearward-facing infant restraint. (CS-085)
AS 36171997 Parameters for the machining and reconditioning of brake drums and discs 4pp
Amendment 1 15 May 2000 This Standard sets out a code of practice for the acceptability of brake drum and disc dimensions, and the criteria for the replacement of worn or damaged brake drums or discs used in the automotive industry. (ME-054)
AS/NZS 3604:1994 Information technologyTelecommunications and information exchange between systems Use of X.25 to provide the OSI connectionmode network service (ISO/IEC 8878:1992) 92pp
Provides a mapping between the abstract primitives and parameters of the connection oriented network service and the real elements of the X.25 packet layer protocol. This Standard is identical with, and has been reproduced from, ISO/IEC 8878:1992. (IT-001)
AS/NZS 3618:1993 Information technologyTelecommunications and information exchange between systems Start-stop transmission signal quality at DTE/DCE interfaces (ISO/IEC 7480:1991) 10pp
Specifies signal quality requirements for serial data transmission at the interface between start-stop transmission data terminal equipment and data circuit-terminating equipment. This Standard is identical with, and has been reproduced from, ISO/IEC 7480:1991. (IT-001)
38pp
Sets out requirements for private swimming pools for achieving and maintaining sanitary water conditions for the protection of bather's health and comfort, ensuring the aesthetic appeal of the water and protecting the pool, its fittings and its accessories. (CS-061)
AS 36082005 InsulatorsPorcelain and glass, pin and shackle typeVoltages not exceeding 1000Va.c.
AS/NZS 3621:2000 Information technologyData communicationsX.25 packet layer protocol for data terminal equipment (ISO/IEC 8208:1995) 170pp
Specifies the procedures, format and facilities at the packet layer for data terminal equipment operating in conformance with ITU-T Recommendation X.25. This Standard is identical with and has been reproduced from ISO/IEC 8208:1995. (IT-001)
8pp
Specifies requirements and tests for porcelain and glass, pin and shackle type insulators for use on overhead lines. (EL-010)
AS 36351990 Unified (ISO inch) screw threads, associated gauges, and gauging practice 135pp
Specifies requirements for parallel screw threads having the Unified thread form for the diameter size range No. 0 (0.060 in) to 6 in inclusive. Limits of size for the Unified coarse, fine, extra fine, and constant pitch screws and a supplementary series of Unified threads of diameter greater than 6 in are given. It also covers screw gauges, associated check and setting gauges, and plug gauges with information being given on types of gauges, materials and hardness, general gauge design requirements, marking, and general notes on inspection of screw threads. Appendices give the basis of tabulated values, examples for calculating the limits of size of untabulated screw threads, notes on the production of external threads, notes on pitch and flank angle errors, notes on recommended system for gauging coated threads, and the limiting dimension of screw gauges for the more commonly used Unified threads. (ME-028)
46pp
64pp
Specifies the loads and load combinations to be applied to the various components (e.g. studs, joists, etc.) of a metal frame for a domestic building up to two storeys in height and a roof pitch of up to 35. Requirements are also specified for the dynamic performance of floors. (BD-067)
Amendment 1 23 January 2003 Specifies requirements for the design, fabrication, erection and stripping of formwork as well as the evaluation and repair of the formed concrete surface. Colour evaluation charts are included in an Appendix. (BD-043)
AS/NZS 3629 Methods of testing child restraints AS/NZS 3629.1:2004 Dynamic testing 13pp
AS 3610 Supplement 11995 Formwork for concreteBlowhole and colour evaluation charts (Supplement to AS 3610 1995) 33pp
Provides additional copies of Appendix B: Blowhole and colour evaluation charts. (BD-043)
Specifies a method for determining the dynamic performance of a child restraint system. To be used in conjunction with the requirements specified in AS/NZS1754. (CS-085)
AS 3636 Data storage and transfer mediaStorage, transportation and maintenance of magnetic media for use in data processing and information storage AS 3636.51990 Guide for use in the home environment 2pp
Provides a simplified guide for users of small computer systems in the home, office or while travelling, for storage and care of diskettes, disks and other magnetic media. (IT-001)
9pp
Sets out the method for determining the dynamic performance of a motor vehicle child restraint system. (CS-085)
AS 3637 Set2007 Underground miningWinding suspension equipment Set 158pp AS 3637 Underground miningWinding suspension equipment AS 3637.12005 General requirements 24pp
AS/NZS 3612:1994 Information technologyData communication37-pole DTE/DCE interface connector and contact number assignments
Specifies general requirements for vertical shaft mine winding conveyance suspension equipment for use in
128
AS 3643.11989 General
516pp
18pp
Specifies requirements for detaching hooks and associated catchplate/detaching bells used in vertical shaft mine winding conveyance suspension equipment for underground mines. Design, materials, construction, marking, and testing are specified. Appendices provide guidelines for the design of the hook region, and give permissible imperfections for magnetic particle inspection. (ME-018)
Specifies information structures to be used for the digital representation and communication of product definition data. Use of this Standard permits the compatible exchange of data of product definition data used by various computer-aided design and computeraided manufacturing (CAD/CAM) systems. It is identical with and has been reproduced from the U.S. Department of Commerce's National Bureau of Standards Initial Graphics Exchange Specification (IGES) Version 4.01988. (IT-006)
AS/NZS 3646.3 Supplement 1:1995 File service definitionOverlapped access (Supplement to AS/NZS 3646.3:1993) (ISO 8571-3:1988/Amd 2:1993) 80pp
Extends the file transfer access management service definition to include overlapped access. This Standard is identical with and has been reproduced from ISO 8571-3:1988/Amd.2:1993. (IT-001)
AS 3643.21992 Subset of AS 3643.1Two-dimensional drawings for architectural, engineering and construction (AEC) industries 37pp
Specifies the information structures used in the architectural, engineering and construction industries for the transfer of data between IGES compatible systems. Contains guidelines for usage. (IT-006)
AS/NZS 3646.4:1993 File protocol specification (ISO 8571-4:1988, ISO 8571-4:1988/Amd 1:1992) 203pp
Defines the basic protocol which supports the internal file service, and the error recovery protocol which supports the external file service. This Standard is identical with, and has been reproduced from, ISO 8571-4:1988 and includes Amendment 1:1992. (IT-001)
21pp
Specifies requirements for rope cappings used in the suspension of conveyances and balance ropes in vertical shafts and slope haulage declines of underground mines. Guide and rubbing rope cappings are excluded. (ME-018)
AS/NZS 3646 Information processing systemsOpen Systems InterconnectionFile transfer, access and management AS/NZS 3646.1:1993 General introduction (ISO 8571-1:1988, ISO 8571-1:1988/Amd 1:1992, ISO 8571-1:1988/Cor 1:1991) 25pp
Provides a general introduction to the concepts and mechanisms of file transfer, access and management (FTAM). FTAM defines a file service and specifies a file protocol available within the application layer of the reference model. It is concerned with identifiable bodies of information which can be treated as files and may be stored within open systems or passed between application processes. This Standard is identical with, and has been reproduced from ISO 8571-1:1988, and includes Technical Corrigendum 1:1991 and Amendment 1:1992. (IT-001)
AS/NZS 3646.4 Supplement 1:1995 File protocol specificationOverlapped access (Supplement to AS/NZS 3646.4:1993) (ISO 8571-4:1988/Amd 2:1993) 96pp
Extends the file protocol specifications to support the services offered by overlapped access. This Standard is identical with and has been reproduced from ISO 8571-4:1988/Amd.2:1993. (IT-001)
21pp
Specifies requirements for drawbars and connecting links for use with conveyances in underground vertical mine shafts. Appendices provide guidelines for the design of chase blocks and threaded components. (ME-018)
12pp
AS/NZS 3646.5:1994 Protocol implementation conformance statement proforma (ISO/IEC 8571-5:1990) 37pp
Defines a protocol implementation conformance statement (PICS) proforma for the detailed expression of the conformance requirements of AS/NZS 3646 series (ISO 8571 series). This Standard is identical with, and has been reproduced from, ISO/IEC 8571-5:1990. (IT-001)
Specifies requirements for rope swivels and swivel hooks used in vertical shaft mine winding conveyance suspension equipment for underground mines. Design, materials, construction, marking, and testing are specified. Appendices provide guidelines for the design of threaded components and give permissible imperfections for magnetic particle inspection. (ME-018)
14pp
Specifies requirements for shackles and chains used in the suspension of vertical mine shaft conveyances. Design, materials, manufacture, marking and testing are specified. Appendices provide guidelines on permissible imperfections for magnetic particle inspection, and design guidelines for shackles and chain links. (ME-018)
AS/NZS 3646.1 Supplement 1:1995 General introductionOverlapped access (Supplement to AS/NZS 3646.1:1993) (ISO 8571-1:1988/Amd 2:1993) 11pp
Extends the service definition of FTAM to incorporate the services offered by overlapped access. This Standard is identical with and has been reproduced from ISO 8571-1:1988/Amd.2:1993. (IT-001)
AS 36481993 Specification and methods of test for packaged concrete mixes 18pp
Specifies requirements for packaged solid ingredients of dense-weight concrete in small quantities (20 kg to 40 kg), intended for use in domestic applications where a particular concrete strength is not an essential consideration. Does not apply to packaged mortar, or grouts, or concrete intended for structural purposes. Appendices give relevant test methods for package materials, packages, concrete made from the contents and examples of instructions for use. (BD-049)
19pp
Specifies requirements and sets out recommendations for the use of test sieves made from woven wire or perforated plate in the aperture size range 32 m to 125 mm. (CH-032)
AS/NZS 3646.2:1993 Virtual filestore definition (ISO 8571-2:1988, ISO 8571-2:1988/Amd 1:1992, ISO 8571-2:1988/Cor 1:1991) 87pp
Defines an abstract model of the virtual filestore for describing files and filestores; defines the set of actions available to manipulate the elements of the model, defines the properties of individual files and associations in terms of attributes, and defines the form of representations of files with hierarchical structures. This Standard is identical with and reproduced from ISO 8571-2:1988, and includes Technical Corrigendum 1:1991 and Amendment 1:1992. (IT-001)
AS 36491990 Information processingSGML support facilitiesSGML document interchange format (SDIF) (ISO 9069:1988) 8pp
Specifies a data structure known as the SGML Document Interchange Form (SDIF). SDIF enables a document conforming to AS 35141987 (ISO 8879:1986) which might be stored in several entities, to be packed into a data stream for interchange in a manner that will permit the recipient to reconstitute the separate entities. SDIF also allows related documents to be included in the data stream, such as covering letters, transmittal forms, catalogue cards, formatting procedures, or the 'document profile' required by a document architecture. This Standard is technically identical with and reproduced from ISO 9069:1988. (IT-015)
AS 36402004 Workplace atmospheresMethod for sampling and gravimetric determination of inhalable dust 16pp
Specifies a gravimetric method for the collection and determination of inhalable dust. The aim of this revision is to align the Standard more closely with the definition of inhalable dust given in ISO 7708. (CH-031)
AS 3641 Recommended practice for atomic emission spectrometric analysis AS 3641.11999 Principles and techniques 22pp
AS/NZS 3646.2 Supplement 1:1995 Virtual filestore definitionOverlapped access (Supplement to AS/NZS 3646.2:1993) (ISO 8571-2:1988/Amd 2:1993) 5pp
Extends the definitions of the abstract model of the virtual filestore to incorporate the concepts of overlapped access. This Standard is identical with and has been reproduced from ISO 8571-2:1988/Amd.2:1993. (IT-001)
Sets out recommendations for instrumentation and operating procedures in the application of atomic emission spectrometry to chemical analysis. A section on quality assurance has been added to the Standard. (CH-016)
AS/NZS 3646.3:1993 File service definition (ISO 8571-3:1988, ISO 8571-3:1988/Amd 1:1992, ISO 8571-3:1988/Cor 1:1991, ISO 8571-3:1988/Cor 2:1992) 157pp
Defines in an abstract way the visible file transfer, access and management service within the OSI application layer in terms of the primitive actions and events of the device, the parameter data associated with each primitive action and event and their inter-relationship. This Standard is identical with, and has been reproduced from, ISO 8571-3:1988 and includes Technical Corrigendum 1:1991, Technical Corrigendum 2:1991 and Amendment 1:1992. (IT-001)
AS/NZS 3651:1994 Information processing systems Telecommunications and information exchange between systemsEnd system to intermediate system routing exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 9542:1988) 31pp
Specifies a protocol which is used by network layer entities operating in end systems and intermediate systems to maintain routing information. This Standard is identical with, and has been reproduced from, ISO 9542:1988. (IT-001)
AS 3643 Computer graphicsInitial graphics exchange specification (IGES) for digital exchange of product definition data
AS/NZS 3654:1996 Information technologySpecification for a data descriptive file for information interchange (ISO/IEC 8211:1994) 69pp
Specifies a medium-independent and system-independent file and data record formats for the interchange of information. This Standard is identical with and has been reproduced from ISO/IEC 8211:1994. (IT-001)
129
AS 36561989
AS 36561989 Computer graphicsGraphical Kernel System for three dimensions (GKS-3D) functional description (ISO 8805:1988) 379pp
Specifies a set of functions for computer graphics programming, the Graphical Kernel System for three dimensions (GKS-3D). GKS-3D is a basic graphics system for applications that produce computer-generated threedimensional pictures on graphics output devices. It supports operator input and interaction by supplying basic functions for graphical input and picture segmentation. It allows storage and dynamic modification of pictures. It is identical with and has been reproduced from ISO 8805:1988. (IT-006)
AS 3657 AcousticsExpression of the subjective magnitude of sound or noise AS 3657.21996 Method for calculating loudness level (ISO 532:1975) 18pp
Specifies two methods for calculating the loudness level of a complex sound in terms of a single number calculated from a spectrum analysis. Method A utilizes physical measurements obtained from spectrum analysis in terms of octave bands. Method B utilizes spectrum analysis in terms of one-third octave bands. This Standard is identical with and has been reproduced from ISO 532:1975. (AV-001)
AS/NZS 3661 Slip resistance of pedestrian surfaces AS/NZS 3661.1:1993 Requirements Available Superseded 14pp
Specifies requirements and test methods for the measurement of the slip resistance of both wet and dry pedestrian surfaces. (BD-094)
AS 3660 Supplement 11993 Protection of buildings from subterranean termitesPrevention, detection and treatment of infestationCertificate of termiticide application (Supplement to AS 36601993) 200pp
(BD-074)
AS 36711989 AcousticsRoad traffic noise intrusion Building siting and construction 17pp
Sets out guidelines for determining the acceptability of indoor and outdoor spaces for specific activities in the presence of road traffic noise, and the extent of noise reduction or type of construction that might be needed to make such spaces acceptable. Also sets out guidelines for determining the acoustical adequacy of existing buildings near routes carrying more than 2000 vehicles per day. (EV-010)
21pp
AS 3660 Supplement 21993 Protection of buildings from subterranean termitesPrevention, detection and treatment of infestationCertificate of completion (Supplement to AS 36601993) 100pp
(BD-074)
Amendment 1 2 February 2006 Specifies requirements for the performance of showers for bathing. (WS-032)
AS/NZS 3666 Set:2006 Air-handling and water systems of buildings Set AS/NZS 3666 Air-handling and water systems of buildings Microbial control AS/NZS 3666.1:2002 Design, installation and commissioning 13pp
15pp
AS 3660 (Set) Termite management AS 3660 Termite management AS 3660.12000 New building work 66pp
Sets out requirements for the storage and archival storage of processed black-and-white microfilm which may be in the form of rollfilm, sheetfilm, stripfilm, or image cards. It includes procedures for the testing and handling of films. (MS-004)
Sets out requirements for the design and construction of subterranean termite management systems for new buildings and ground level extensions and renovations. It includes provisions for both physical and chemical termite barriers throughout mainland Australia. It is intended for builders, building designers, regulatory authorities, termite management system manufacturers and installers, and those people requiring termite management systems, This Standard is the 1st part in a series of 3 Standards on termite management. (BD-074)
Specifies minimum requirements for the design, installation and commissioning of air-handling and water systems of buildings, other than sole occupancy dwellings, for the purposes of microbial control. It does not include requirements for refrigerated room airconditioners and non-ducted split systems. (ME-062)
AS/NZS 3675:2002 ConductorsCovered overheadFor working voltages 6.35/11(12) kV up to and including 19/33(36) kV 31pp
Specifies the construction, dimensions and test requirements for water blocked covered conductors, suitable for overhead lines. (EL-003)
52pp
Amendment 1 5 December 1996 Sets out methods for implementation during construction for minimizing the risk to new buildings from damage by subterranean termites. It includes provisions for physical termite barriers and for the use of approved chemicals. This document is intended for use at such time as organochlorine termiticides are banned (30 June 1995 for all States and Territories, except the Northern Territory). This document does not make reference to treatment of existing buildings. (BD-074)
AS/NZS 3679 Structural steel AS/NZS 3679.1:1996 Hot-rolled bars and sections 32pp
6pp
Specifies minimum requirements for the operation and maintenance of air-handling and water systems of buildings, other than sole occupancy dwellings, for the purposes of microbial control. It does not include requirements for refrigerated room airconditioners and non-ducted split systems. (ME-062)
Amendment 1 5 June 1997 Amendment 2 1 May 2000 Specifies requirements for the production and supply of hot-rolled structural steel bars and sections for general structural and engineering applications. (BD-023)
17pp
7pp
Amendment 1 5 April 1996 Specifies minimum requirements for the operation and maintenance of air-handling and water systems in buildings to assist in the control of microorganisms. It does not apply to sole occupancy dwellings. (ME-062)
Amendment 1 5 September 1998 Specifies requirements for the production and supply of welded I sections for general structural and engineering purposes. (BD-023)
130
AS/NZS 3682:1994 Information processing systemsData communicationsProtocol for providing the connectionless-mode network service (ISO 8473:1988, ISO 8473:1988/Add.3:1989, ISO 8473:1988/Cor.1:1992) 56pp
Specifies a protocol which is used to provide the connectionless-mode network service as described in AS/NZS 2994. This protocol contains procedures for the connectionless transmission of data and control information from one network entity, encoding of the protocol data units and the procedures for the correct interpretation of protocol control information. This Standard is identical with, and has been reproduced from, ISO 8473:1988; Addendum 3:1989; and Technical Corrigendum 1:1992. (IT-001)
10pp
7pp
Specifies the construction of test dummies for use where required in other parts of AS 3696. This Standard is identical with and reproduced from ISO 717611:1992. (ME-067)
Amendment 1 5 July 1998 Specifies materials, design, construction, performance and labelling requirements for manual and electric wheelchairs. (ME-067)
AS 36851998 Recommended procedures and principles of glow discharge mass spectrometry (GD-MS) 14pp
A guide on the operation and recommendations for use of glow discharge mass spectrometry. The guidelines given are intended primarily for the development and application of a standard method. They may be applied less rigidly in ordinary routine operation. They are intended to be of general applicability and not restricted to a given class of material. (CH-016)
AS/NZS 3696 Wheelchairs AS/NZS 3696.1:2008 Determination of static stability (ISO 7176-1:1999)
14pp
Adopts ISO 7176-1:1999 to specify test methods for deferring the static tipping stability of wheelchairs. (ME-067)
AS/NZS 3696.2:2008 Determination of dynamic stability of electric wheelchairs (ISO 7176-2:2001) 15pp
Adopts ISO 7176-2:2001 to specify the requirements and test methods for the determination of dynamic stability of wheelchairs. (ME-067)
AS/NZS 3696.14:1998 Power and control systems for electric wheelchairsRequirements and test methods (ISO 7176-14:1997) 35pp
Specifies requirements and test methods for power and control systems of electric wheelchairs (including scooters). Includes vehicles with built-in battery chargers. This Standard is based on but not equivalent to and reproduced from ISO 7176-14:1997. (ME-067)
AS 3689 Automatic fire extinguishing systems using halogenated hydrocarbons AS 3689.11989 Halon 1301 total flooding systems Obsolescent 69pp
AS/NZS 3696.21:2008 Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters (ISO 7176-21:2003) 15pp
Adopts ISO 7176-21:2003 to specify requirements and test methods for electromagnetic capability of electrically powered and manual wheelchairs and motorized scooters. (ME-067)
Amendment 1 4 June 1990 Specifies requirements for total flooding fire extinguishing systems, utilizing halon 1301 (bromotrifluoromethane (CF3Br)) as the extinguishing medium, for use in enclosed spaces. It applies to single supply or distributed supply systems. The Standard contains requirements for concentration, protected enclosures, quantity, halon 1301 supply, distribution system control systems and marking. (FP-011)
12pp
AS 3696.51989 Determination of overall dimensions, mass and turning space (ISO 7176-5:1986) 3pp
Amendment 1 5 July 1990 Specifies methods for determining overall dimensions (both ready for occupation and folded), mass and minimum turning space of manually operated and electrically operated wheelchairs. Identical with and reproduced from ISO 7176-5:1986. (ME-067)
Adopts ISO 7176-22:2000 to specify the set-up procedures for testing wheelchairs. (ME-067)
AS/NZS 3696.23:2008 Requirements and test methods for attendant-operated stair-climbing devices (ISO 7176-23:2002) 35pp
Adopts ISO 7176-23:2002 to specify test methods for attendant-operated stair climbing devices. (ME-067)
30pp
Amendment 1 10 June 1991 Sets out requirements for mechanical components in automatic fire extinguishing systems using halogenated hydrocarbons. (FP-011)
17pp
AS 3696.61990 Determination of maximum speed, acceleration and retardation of electric wheelchairs (ISO 7176-6:1988) 2pp
Specifies methods for determining maximum speed and maximum acceleration and retardation of electric wheelchairs. Identical with and reproduced from ISO 7176-6:1988. (ME-067)
AS/NZS 3696.24:2008 Requirements and test methods for useroperated stair-climbing devices (ISO 7176-24:2004) 84pp
Adopts ISO 7176-24:2004 to specify test methods for user-operated stair-climbing devices. (ME-067)
Specifies requirements and recommended methods for installing acrylonitrile butadiene styrene (ABS) pipelines, above or below ground, for both pressure and non-pressure applications. (PL-021)
AS/NZS 3697:1994 Information technologyOpen Systems InterconnectionJob transfer and manipulation concepts and services (ISO/IEC 8831:1992) 111pp
Defines the concepts and services for job transfer and manipulation in the form of work to be done on one or more open systems, and provides the means to monitor the execution of work previously specified and modified as required. This Standard is identical with, and has been reproduced from, ISO/IEC 8831:1992. (IT-001)
AS 36911989 Solvent cement and priming (cleaning) fluids for use with ABS pipes and fittings 10pp Available Superseded
Specifies the requirements for solvent cement and priming fluids used in jointing of acrylonitrile butadiene styrene (ABS) pipes and fittings. Relevant test methods are included. (PL-021)
AS/NZS 3696.8:1998 Requirements and test methods for static, impact and fatigue strengths (ISO/FDIS 7176-8:1997) 57pp
Specifies strength requirements for wheelchairs including scooters intended for users whose mass does not exceed 100 kg. This Standard is technically equivalent to and has been reproduced from ISO/FDIS 7176-8:1997. (ME-067)
AS/NZS 3692:1993 Information technologyOpen Systems InterconnectionSystems management overview (ISO/IEC 10040:1992) 25pp
Provides an overview to the family of systems management Standards. These Standards are partitioned into groups with
AS/NZS 3696.9:2008 Climatic tests for electric wheelchairs (ISO 7176-9:2001, MOD) 8pp
Adopts ISO 7176-9:2001 with national modifications to specify methods for determining the effects on
AS/NZS 3698:1994 Information technologyOpen Systems InterconnectionSpecification of the basic class and full protocol for job transfer and manipulation (ISO/IEC 8832:1992) 157pp
Specifies the application-context name to be used to reference the procedures used in this Standard in applicationcontext negotiation, the abstract syntax name to be used to
131
AS 3700 Set2007
reference the abstract syntax of a job transfer and manipulation (JTM) transfer element, commitment, concurrency and recovery user data and JTM defined documents. This Standard is identical with, and has been reproduced from, ISO/IEC 8832:1992. (IT-001)
6pp
Sets out a method for determining the tearing strength of geotextiles under in-plane loading, using the trapezoidal method. (CE-020)
300pp 191pp
Amendment 1 24 May 2002 Amendment 2 11 December 2003 Amendment 3 31 August 2007 Provides designers, engineers and specifiers with the minimum requirements for the design and construction of unreinforced, reinforced and prestressed masonry, including built-in components, for use in masonry applications. (BD-004)
AS 3706.42001 Determination of burst strength California bearing ratio (CBR)Plunger method 9pp
Specifies the method for determining the burst strength and deformation properties of geotextiles using California Bearing Ratio (CBR) test apparatus for both atmospheric-conditioned and wet-conditioned specimens. (CE-020)
associated ratings and, where appropriate, the minimum internal and door opening dimensions for certain types of containers. Series 1 freight containers are intended for intercontinental traffic and Series R freight containers are intended for traffic within Australia. This Standard has been reproduced from ISO 668:1995 and introduces requirements for Series R freight containers in an appendix. (ME-068)
AS/NZS 3711.2:1993 Terminology (ISO 830:1981, ISO 830:1981/Amd.1:1984, ISO 830:1981/Amd.2:1988) 14pp
Amendment 1 1 January 2000 Defines terms relating to freight containers, including types, characteristics, components and structures. Technically equivalent to and reproduced from ISO 830:1981, including Amendment 1:1984 and Amendment 2:1988. (ME-068)
AS/NZS 3711.3:1993 Corner fittings (ISO 1161:1984, ISO 1161:1984/Cor 1:1990) 24pp
Specifies the basic dimensions and the functional and strength requirements of corner fittings for Series 1 and Series R freight containers. Technically equivalent to and reproduced from ISO 1161:1984, including Technical Corrigendum 1:1990. (ME-068)
7pp
Provides guidance for the formulation and application of discrete item designation for parts used in electrotechnology. The designation correlates the item in different diagrams, parts lists, circuit descriptions, instructions and in the equipment. Technically equivalent to IEC 750:1983. A comprehensive alphabetical list of items and their letter codes has been included for quick reference. (TE-013)
Sets out the method for determining the seam strength of geotextiles. (CE-020)
AS/NZS 3711.4:1993 General purpose containers (ISO 1496-1:1990, ISO 1496-1:1990/Amd 1:1993) 29pp
Amendment 1 24 January 2000 Specifies the basic requirements for the specification and testing of Series 1 and Series R freight containers of the totally enclosed general purpose types and certain special purpose types (closed, vented, ventilated or open top), which are suitable for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport. Technically equivalent to and reproduced from ISO 1496-1:1990, including Amendment 1:1993. (ME-068)
AS 3703 Long-span corrugated steel structures AS 3703.11989 Materials and manufacture 13pp
Sets out requirements for the material and manufacture of long-span corrugated steel structures with longitudinal stiffeners. These structures incorporate a relatively large radius of curvature in crown or side plates. Dimensional details and purchasing guidelines are also included. (CE-025)
56pp
19pp
Sets out requirements for the design and installation of long-span corrugated steel structures. Design requirements include soil compaction, design pressure, stresses, thickness of metal, seam strength and minima for metal thickness and cover. Installation requirements include foundation preparation, plate assembly, backfilling, and corrosion protection. Appendices tabulate cover limits and bolting for railway loading (M250) and highway loading (T44-A14) for the various structures. (CE-025)
Specifies the basic requirements for the specification and testing of Series 1 and Series R thermal containers, which are suitable for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport. This Standard is reproduced from ISO 1496-2:1996 and introduces requirements for Series R freight containers in an appendix. (ME-068)
26pp
29pp
Provides a list of terms and symbols used in the geosynthetics industry. (CE-020)
Specifies the basic requirements for the specification and testing of Series 1 and Series R tank containers suitable for the carriage of gases and liquids, including solid substances, which may be loaded or unloaded as liquids either for gravity or pressure discharge, for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport. This Standard has been reproduced from ISO 1496-3:1995 and introduces requirements for series R containers in an appendix. (ME-068)
AS 3706 GeotextilesMethods of test AS 3706.02003 General introduction and list of methods 2pp
(CE-020)
33pp
AS 3706.12003 General requirements, sampling, conditioning, basic physical properties and statistical analysis 10pp
Sets out general requirements for the testing of fabrics intended for use as geotextiles. (CE-020)
AS/NZS 3707:2001 Method for testing pressure cycling resistance of pipes and fittings 15pp
Provides the method for determining the pressure cycling resistance properties of pipes, joints and fittings for pressure applications. Assesses the ability of a pipe or fitting system to perform in an environment that involves cyclical loading. (PL-045)
Amendment 1 1 January 2000 Specifies the basic requirements for the specification and testing of Series 1 and Series R dry bulk containers of the non-pressurized type, which are suitable for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport. Technically equivalent to and reproduced from ISO 1496-4:1991. (ME-068)
40pp
AS 3711 Freight containers AS 3711.12000 Classification, dimensions and ratings (ISO 668:1995) 12pp
Specifies a classification for Series 1 and Series R freight containers based on external dimensions, the
Specifies the basic requirements for specification and testing of Series 1 freight containers of the platform and platform-based types designated 1AA, 1A, 1AX, 1BB, 1B, 1BX, 1CC, 1C and 1CX, which are suitable for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport, with certain limitations (for example, when loaded, platforms cannot be stacked or top lifted by means of conventional spreaders). This Stan-
132
AS 3730.22006 LatexInteriorSemi-gloss
6pp
25pp
Provides a guide to the features and typical characteristics that are expected of an interior semi-gloss latex finish paint, when applied by brush, roller or sprayer in accordance with manufacturer's recommendations. (CH-003)
Specifies an identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation and optional marks which may be used for automatic machine readable information (AMRI) system purposes. Also specifies a data coding system for country and container size and type with corresponding optional marks for display of operational marks (mandatory and optional) and physical presentation of marks. This Standard is reproduced from ISO 6346:1995 and introduces requirements for Series R freight containers in an appendix. (ME-068)
AS 37202008 Measurement of power-frequency electric fields (IEC 60833 Ed. 1.0 (Bilingual 1987)) 18pp
(EL-007)
6pp
AS 37231989 Installation and maintenance of plastics pipe systems for gas 19pp Available Superseded
Provides installation and jointing procedures for belowground plastics pressure systems in gas service. Precautions in the selection and handling of plastics pipes are given, and recommended procedures for isolation and maintenance of plastics pipes are covered. (PL-025)
Provides a guide to the features and typical characteristics that are expected of an interior low-gloss latex finish paint, when applied by a brush, roller or sprayer in accordance with manufacturers recommendations. (CH-003)
AS 3730.52006 Solvent-borneInteriorSemi-gloss
6pp
Provides a guide to the features and typical characteristics that are expected of a solvent-borne, interior semi-gloss enamel finish paint, when applied by brush, roller or sprayer in accordance with the manufacturers instructions. (CH-003)
71pp
Specifies methods of handling and securing Series 1 and Series R freight containers. This Standard is reproduced from ISO 3874:1997 and introduces requirements for Series R freight containers in an appendix. (ME-068)
AS 37241994 Fibreboard boxes for the export of meat, meat products and offal 13pp
Amendment 1 5 January 1997 Sets out the specifications applicable to fibreboard boxes for the packaging of frozen or chilled meat, meat products and offal for export. (PK-025)
AS 3712 Data storage and transfer mediaData interchange on 90 mm diskettes using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side AS 3712.11990 Dimensional, physical and magnetic characteristics (ISO/IEC 9529-1:1989) 37pp
Specifies the dimensional, physical and magnetic characteristics of the diskette, so as to provide physical interchangeability between data processing systems. This Standard is identical to, and has been reproduced from, ISO/IEC 9529-1. (IT-001)
AS 3730.72006 LatexExteriorFlat
9pp
Provides a guide to the features and typical characteristics that are expected of a latex flat finish paint, intended primarily for exterior use, when applied by brush, roller or sprayer in accordance with the manufacturers instructions. (CH-003)
AS/NZS 3725 Supplement 1:2007 Design for installation of buried concrete pipesCommentary (Supplement to AS/NZS 3725:2007) 45pp
Gives additional guidance and commentary to AS/NZS 3725:2006. The Standard provides an agreed basis for determining the vertical working loads on installed steelreinforced, fibre-reinforced and unreinforced concrete pipes and a range of installation conditions. (WS-006)
AS 3730.82006 LatexExteriorLow-gloss
9pp
Provides a guide to the features and typical characteristics that are expected of a latex low-gloss finish paint, primarily for use when, applied by brush, roller or sprayer in accordance with the manufacturers instructions. (CH-003)
13pp
Specifies the track layout, the track format and the characteristics of the recorded signals. This Standard is identical with, and has been reproduced from ISO/IEC 9529-2. (IT-001)
AS 3730.92006 LatexExteriorSemi-gloss
9pp
12pp
AS 37152002 Metal finishingThermoset powder coating for architectural applications of aluminium and aluminium alloys 21pp
Sets out test procedures and specifies performance requirements for thermoset powder coatings applied to aluminium and aluminium-alloy substrates intended for architectural applications and welded areas. (MT-009)
Provides recommendations for pavements associated with housing developments. Guidelines are given for pavement designs on well-drained, naturally occurring subgrades which do not include reactive soil sites. References are made to pavements of concrete, segmental paving units, asphalt and bituminous spray seal. (BD-098)
Provides a guide to the features and typical characteristics that are expected of a latex semi-gloss finish paint, primarily for exterior use, when applied by brush, roller or sprayer in accordance with the manufacturers instructions. (CH-003)
AS 3730.102006 LatexExteriorGloss
9pp
Provides a guide to the features and typical characteristics that are expected of an exterior gloss latex finish paint, when applied by brush, roller or sprayer in accordance with manufacturers recommendations. (CH-003)
69pp
Amendment 1 17 May 2006 Amendment 2 5 December 2008 Specifies requirements for metallic taps, plastic taps, mixing taps, sensor taps, lever taps, timed flow taps, mixing taps mechanical (non-thermostatic), and tapsets in a range of nominal sizes from DN 6 to DN 50, generally for continuous operating temperatures not exceeding 80C. Products designed for other temperature ranges are included where tested to the appropriate temperature criteria. (WS-001)
AS 3730.122006 LatexInteriorGloss
6pp
AS 3730 Guide to the properties of paints for buildings AS 3730.02006 General information on the specification, purchasing and testing of paints 11pp
Provides a specification for paints intended for decorative, and to a lesser extent, protective purposes on domestic, public and commercial buildings. It refers to the difficulties involved in setting specifications for paints that are intended for a wide range of uses. (CH-003)
Provides a guide to the features and typical characteristics that are expected of an interior gloss latex finish paint, when applied by brush, roller or spray in accordance with the manufacturer's recommendations. (CH-003)
6pp
AS 3719 Aluminium and aluminium alloys AS 3719.11989 Determination of iron Spectrophotometric method (ISO 793:1973)
Provides a guide to the features and typical characteristics that are expected of a solvent-borne wood primer, when applied by brush in accordance with the manufacturers directions. (CH-003)
4pp
Sets out a spectrophotometric method for the determination of iron in aluminium and aluminium alloys in the range 0.05% to 2.5%. This Standard is technically equivalent to ISO 793:1973 but contains precision data obtained from an interlaboratory test program carried out in Australia. (CH-010)
AS 3730.12006 LatexInteriorFlat
7pp
6pp
Provides a guide to the features and typical characteristics that are expected of an interior flat latex finish paint, when applied by brush, roller or sprayer in accordance with manufacturer's recommendations. (CH-003)
Provides a guide to the features and typical characteristics that are expected of a solvent-borne undercoat for interior and exterior use, when applied by brush, roller or sprayer in accordance with the manufacturers instructions. (CH-003)
133
AS 3730.152006
AS 3730.152006 PrimerLatexFor metallic zinc surfaces 7pp
Provides a guide to the features and typical properties that are expected of a water-borne latex primer paint for interior and exterior use on zinc and zinc alloy surfaces (e.g., galvanized iron), when applied by brush, roller or sprayer, in accordance with manufacturers instructions. (CH-003)
AS 3731 Stationary batteriesNickel-cadmium AS 3731.11995 Vented type (IEC 60623 Ed. 3.0 (Bilingual 1990), IEC 60623 Amd.1 Ed. 3.0 (Bilingual 1992), IEC 60623 Amd.2 Ed. 3.0 (Bilingual 1992)) 15pp
Specifies requirements and tests for vented nickelcadmium rechargeable batteries. Technically identical with and reproduced from IEC 623:1990, including Amendment No.1:1992 and Amendment No.2:1992. (EL-005)
AS 37391990 Data storage and transfer mediaDesignation of unrecorded diskettes (ISO 9983:1989) 2pp
Specifies a system of labelling diskettes and diskette drives to reduce the problems associated with a range of similar diskette sizes and densities. This Standard is technically equivalent to ISO 9983:1989. (IT-001)
AS 3740 Set2006 Wet areas Set AS 37402004 Waterproofing of wet areas within residential buildings 38pp
Sets out criteria for wet areas within residential buildings. It gives minimum requirements for materials, designs and installations. (BD-038)
AS 3731.21995 Valve-regulated type (IEC 60622 Ed. 2.0 (Bilingual 1988), IEC 60622 Amd.2 Ed. 2.0 (Bilingual 1992), IEC 60622 Amd.2 Ed. 2.0 Cor.1 (Bilingual 1992)) 14pp
Specifies requirements and tests for valve-regulated nickel-cadmium rechargeable batteries. Technically identical with and reproduced from IEC 622:1988, including Amendment No.2:1992 and Corrigendum (August 1992). (EL-005)
AS/NZS 3733:1995 Textile floor coveringsCleaning maintenance of residential and commercial carpeting 39pp
Provides requirements for various cleaning techniques and recommendations for the establishment of maintenance programs for carpets in residential and commercial situations to achieve maximum appearance retention and wear life, and to minimize possible hazards to health from poorly maintained carpets. Also provides requirements for cleaning chemicals to cover their known effects on new generation carpets, requirements for vacuum cleaner filtration, and recommendations for disposal of extracted cleaning wastes. Includes a useful guide to stain removal. (TX-009)
AS 37421990 Mineral wool thermal insulationBatt and blanket 4pp Available Superseded
Specifies details of materials and manufacture, thermal resistance, combustion characteristics, dimensions, packaging and marking and includes an appendix on test specimen selection for mineral wool thermal insulation. (BD-058)
AS 3734 Information systemsEquipmentFibre distributed data interfaces (FDDI) AS 3734.11991 Token ring PHYsical layer protocol (PHY) (ISO 9314-1:1989) 31pp
Specifies the lower sublayer of the physical layer in Fibre Distributed Data Interface (FDDI) networks. This Standard is identical with and reproduced from ISO/IEC 9314-1:1989. (IT-001)
35pp
Specifies physical, chemical, biological and labelling requirements for potting mixes packaged for retail sale including information to be supplied to the consumer and health warnings. Includes requirements for regular and premium grade mixes as well as special purpose mixes. (CS-037)
AS/NZS 3744 FurnitureAssessment of the ignitability of upholstered furniture AS/NZS 3744.1:1998 Ignition sourceSmouldering cigarette (ISO 8191-1:1987) 11pp
This Standard is technically equivalent to and has been reproduced from ISO 8191-1:1987. (CS-086)
6pp
Provides a guide to the features and typical characteristics that are expected of an interior clear finish paint, when applied by brush, roller or sprayer in accordance with the manufacturers instructions. (CH-003)
AS 3734.21991 Token ring Media Access Control (MAC) (ISO 9314-2:1989) 67pp
Specifies the upper sublayer of the physical layer in Fibre Distributed Data Interface (FDDI) networks. This Standard is identical with and reproduced from ISO/IEC 9314-2:1989. (IT-001)
AS/NZS 3744.3:1998 Ignition sourcesNominal 160 mL/min gas flame and nominal 350 mL/min gas flame 7pp
Sets out the method to be employed in assessing the ignitability of actual combinations of upholstered seating materials when subjected to gas flaming ignition sources. (CS-086)
7pp
Provides a guide to the features and typical characteristics that are expected of a solvent-borne wood stain (opaque or semi-transparent), when applied by brush, in accordance with the manufacturer's instructions, to rough-sawn or dressed timber. (CH-003)
19pp
Specifies requirements for the design and installation of reinforced concrete structures used for retaining liquids at ambient temperatures. This Standard is limited to concrete with ultimate compressive strength in the range 20 MPa to 50 MPa at 28 days. For these structures, this Standard supplements and takes precedence over the requirements of AS 3600, Concrete structures. (CE-022)
AS 37452002 Emergency control organization and procedures for buildings, structures and workplaces 28pp
Amendment 1 17 May 2004 Amendment 2 30 November 2005 Specifies recommended procedures for the safety of people in buildings, structures and workplaces during emergencies; guidelines for the appointment of the Emergency Planning Committee and the setting up of the Emergency Control Organization. (FP-017)
AS 3735 Supplement 12001 Concrete structures retaining liquids Commentary (Supplement to AS 37352001) 58pp
Provides commentary and additional information to AS 3735, Concrete structures retaining liquids. Includes tables and drawings to assist in the usage of that Standard. (CE-022)
2pp
Provides a listing of guides to the properties of paints for buildings in the AS 3730 series. (CH-003)
AS 37451995 Emergency control organization and procedures for buildings 16pp Available Superseded
Specifies guidance on the establishment of an Emergency Control Organization and the preparation of emergency procedures for buildings or groups of buildings, for ensuring the controlled movement of occupants including evacuation. (FP-017)
7pp
Specifies the essential bibliographic elements of a map and how and where they should be placed on the map. It is intended for use by map makers, libraries and kindred organizations who store and retrieve maps, particularly those compiling a computer database. (IT-004)
134
17pp
20pp
Specifies the requirements for 19 types of files and rasps for general use, including disposition and spacing of teeth for each type. Tolerances on dimensions and spacing of teeth are given, and tests by a hand prover are prescribed. (ME-010)
Provides requirements for two-component solventborne full gloss polyurethane paints intended for use in the protection of iron and steel against external atmospheric corrosion. Includes high-build coatings. (CH-003)
9pp
AS 37481990 Information processing systemsSmall Computer System Interface (SCSI) (ISO 9316:1989) 169pp
Provides the mechanical and functional requirements for a small computer input/output bus and command sets for peripheral device types commonly used with small computers. The interface is intended for use with data rates up to four megabytes per second. This Standard is identical with and has been reproduced from ISO 9316:1989, Information processing systemsSmall Computer System Interface (SCSI). (IT-001)
13pp
Provides requirements for aluminium coloured finishing paints that are intended to protect iron and steel against atmospheric corrosion. (CH-003)
Specifies requirements for single-component, general purpose priming paints as part of a system for the protection of iron and steel against atmospheric corrosion. (CH-003)
AS/NZS 3749 Intruder alarm systemsRoad vehicles AS/NZS 3749.1:2003 Performance requirements (IEC 60839-10-1 Ed. 1.0 (Bilingual 1995)) 30pp
Specifies the requirements and test methods for vehicle security alarm systems intended as original equipment and for post-delivery installation for vehicles intended for the carriage of passengers. It includes sections on general requirements, test requirements, product information and marking, and equipment variations. Appendices are provided for the requirements of sound level test for sounding devices and detection range test for ultrasonic movement detectors. (EL-031)
9pp
16pp
Provides requirements for organic zinc-rich priming paint intended for use on iron and steel to provide protection against atmospheric corrosion. (CH-003)
Specifies requirements for solvent-borne undercoat paints as part of a system for the protection of iron and steel against atmospheric corrosion. (CH-003)
10pp
25pp
Specifies requirements for a two-component, full gloss epoxy paint for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment. (CH-003)
Specifies requirements for full gloss enamel, solventborne paints as part of a system for the protection of iron and steel against atmospheric corrosion. (CH-003)
9pp
Specifies requirements for solvent-borne semi-gloss enamel paints as part of a system for the protection of iron and steel against atmospheric corrosion. (CH-003)
9pp
Sets out the requirements for the installation and maintenance of car alarm systems designed in accordance with Part 1 of the Standard to ensure that the alarm system performs to the manufacturer's specification and false alarms do not occur. There are sections on installation and commissioning, and appendices on maintenance and the functional tests which should be carried out on the detection device. (EL-031)
15pp
AS 37512005 Underground miningSlope haulage Couplings, drawbars, and safety chains 29pp
Specifies requirements for couplings, drawbars, and safety chains that connect slope haulage conveyances in underground mines. Covers design, materials, manufacture, testing, and marking. (ME-018)
Provides requirements for alkyd/micaceous iron oxide paint intended to protect iron and steel against atmospheric corrosion. (CH-003)
AS/NZS 3750 Paints for steel structures AS/NZS 3750.0:2008 Introduction and list of Standards 1p
(CH-003)
15pp
Provides requirements for two-component epoxy primers for the protection of iron and steel and galvanized iron and steel against atmospheric corrosion in an industrial or marine environment. (CH-003)
AS/NZS 3752:2006 Welding and allied processesDetermination of hydrogen content in ferritic steel arc weld metal (ISO 3690:2000) 20pp
Specifies the sampling and analytical procedure for the determination of diffusible and (WD-002)
25pp
Provides requirements for a two-component, highbuild epoxy paint intended to be used for the protection of iron and steel against exterior atmospheric corrosion. (CH-003)
20pp
Specifies requirements for inorganic zinc silicate paint for use in the protection of iron and steel against exterior atmospheric corrosion. (CH-003)
16pp
Specifies requirements for two-component ultra highbuild paints for the protection of iron and steel against exterior corrosion in aggressive service conditions. (CH-003)
AS/NZS 3750.16:1998 Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed steel 17pp
Specifies requirements for waterborne primers and paints intended to be used on primed or unprimed galvanized steel, zinc/aluminium alloy-coated steel and on zinc-primed steel in exterior industrial or marine applications when applied by brush, roller or spraying. (CH-003)
13pp
Specifies requirements for single- and multicomponent primers and finishing coats for the protection of steel against atmospheric corrosion at elevated temperatures. (CH-003)
AS 37551990 AcousticsMeasurement of airborne noise emitted by computer and business equipment (ISO 7779:1988) 37pp
Specifies procedures for measuring and reporting the noise emitted by computer and business equipment. The basic emission quantity is the A-weighted sound power level which may be used for comparing equipment of the same type, but from different manufacturers, or for comparing different equipment. Two methods for determining the sound power levels are specified in order to avoid undue restriction on existing facilities and experience. Identical with and reproduced from ISO 7779. (AV-007)
14pp
Provides requirements for single component bitumen paints intended for the short-term protection of iron and steel against atmospheric corrosion. (CH-003)
16pp
Specifies requirements for a two-component, solventborne full gloss acrylic paint intended to be used for the protection of iron and steel against exterior atmospheric corrosion. (CH-003)
AS 37561990 AcousticsMeasurement of high-frequency noise emitted by computer and business equipment (ISO 9295:1988) 11pp
Specifies four methods for the determination of the sound power levels of high-frequency noise emitted by computer
135
AS 37571990
and business equipment in the frequency range covered by the octave band centred at 16 kHz. Identical with and reproduced from ISO 9295. (AV-007) plicable frequency range is 1 Hz to 100 Hz. This Standard is technically identical to and reproduced from ISO 6954:1984. (AV-008)
77pp
AS 37571990 AcousticsDeclared noise emission values of computers and business equipment (ISO 9296:1988) 7pp
Applies to computer and business equipment. Specifies the method for determining the declared noise emission values, acoustical and product information to be supplied to users by the manufacturer and the method for verifying the declared noise emission values given by the manufacturer. Identical with and reproduced from ISO 9296. (AV-007)
AS 37641990 The measurement and reporting of shipboard vibration data (ISO 4867:1984) 18pp
Sets out procedures for gathering and presenting data on hull vibration in single-shaft and multiple-shaft sea-going merchant ships, and for vibrations of propulsion-shaft systems as it affects hull vibration. This Standard is technically identical to and reproduced from ISO 4867:1984. (AV-008)
Amendment 1 5 September 1998 Amendment 2 5 December 1998 Specifies requirements for the determination of loads for the design of containment structures for the mass storage of bulk solids. The loads include permanent loads, normal service loads, environmental loads, and accidental loads. Does not apply to containers for the storage of silage. (BD-065)
AS 3774 Supplement 11997 Loads on bulk solids containers Commentary (Supplement to AS 37741996) 15pp
Provides background materials from which requirements are derived in AS 3774. (BD-065)
AS 37661990 Mechanical fittings for low voltage aerial bundled cables 21pp
Specifies performance and general requirements for fittings designed specifically for use with the insulated aerial cables, manufactured to AS 3560, Electric cablesAerial bundledVoltages up to and including 0.6/1 kV. (EL-010)
AS 37591990 Codes for the representation of currencies and funds (ISO 4217:1987) 12pp
Provides a series of universally applicable codes for the identification of currencies and funds for transaction purposes. This Standard is identical with and has been reproduced from ISO 4217:1987, Codes for the representation of currencies and funds. (IT-005)
AS 37671990 Information processingRepresentation of numerical values in character strings for information interchange (ISO 6093:1985) 12pp
Specifies three presentations of numeric values, which are represented in character strings in a form readable by computers, for use in interchange between processing systems. The Standard also provides guidance for developers of programming language standards and software developers. This Standard is identical with, and has been reproduced from ISO 6093:1985. (IT-001)
Amendment 1 29 December 2006 Specifies requirements for chain slings using Grade T chain complying with AS 2321. (ME-025)
20pp
AS/NZS 3760:2003 In-service safety inspection and testing of electrical equipment 33pp
Amendment 1 3 August 2005 Specifies the procedures and criteria for the in-service safety inspection and testing of electrical equipment which is designed for connection by a flexible cord. It also applies to cord extension sets, portable outlet devices, portable residual current devices and portable isolation transformers. Appendices include detailed test methods. It does not cover type approval tests for the design and construction of the equipment, nor does it include any procedural rules for the safe use of the equipment. (EL-036)
Amendment 1 28 November 2006 Specifies practices for the care and use of GradeT chain slings. It does not cover repairs to such slings or the use of such slings for the lifting of personnel. (ME-025)
AS/NZS 3760:2001 In-service safety inspection and testing of electrical equipment 21pp Available Superseded
Specifies the procedures and criteria for the in-service safety inspection and testing of electrical equipment which is designed for connection by flexible cord. It also applies to cord extension sets, portable outlet devices, portable residual current devices and portable isolation transformers. Appendices include detailed test methods. It does not cover type approval tests for the design and construction of the equipment, nor does it include any procedural rules for the safe use of equipment. (EL-036)
4pp
Amendment 1 10 December 1990 Gives recommendations for the design and installation of automatic teller machines to facilitate their accessibility to users. (IT-007)
AS/NZS 3770:1993 Guide to the safe use of infusion pumps and controllers 19pp
Provides advice on the safe use of infusion pumps, infusion controllers, syringe pumps and pumps for ambulatory use in hospitals and health care facilities. (HE-003)
AS 3778 Measurement of water flow in open channels AS 3778.12001 Vocabulary and symbols (ISO 772:1996)
AS 37711998 Road lighting luminaires with integral control gear 31pp Available Superseded
Specifies requirements for the design, construction, performance and testing of road lighting luminaires with integral control gear, to ensure their suitability for the operating and environmental conditions to which they will be subjected in service. Applies to luminaires with discharge lamps of various types and ratings, which are designed to provide road lighting of Category V in accordance with AS/NZS 1158.1.1 or Category B in accordance with AS 1158.1. (LG-002)
94pp
This Standard is identical to and has been reproduced from ISO 772:1996. (CE-024)
AS 37621990 Measurement and reporting of local vibration data of ship structures and equipment (ISO 4868:1984) 13pp
Sets out procedures for gathering and presenting data on vibrations of local structural elements or equipment in seagoing merchant ships. Concerned with local vibration measured on structural elements, superstructure, decks, bulkheads, masts, machines, foundation and equipment, but relates only to the measurement and reporting of vibration of the structure or equipment mounted thereon. This Standard is technically identical to and reproduced from ISO 4868:1984. (AV-008)
AS 37631990 Mechanical vibration and shockGuidelines for the overall evaluation of vibration in merchant ships (ISO 6954:1984) 3pp
Provides guidelines for the relative evaluation of hull and superstructure in normally occupied spaces, and shipboard vibration data, useful for the development and improvement of hull vibration reference amplitudes. Applicable to both turbine-driven and diesel-driven merchant ships of length between perpendiculars of 100 m or greater. The ap-
136
AS 3778.4.21991 Measurement using flow gauging structuresRectangular broad-crested weirs (ISO 3846:1989) 12pp
Specifies the requirements for the use of rectangular broad-crested weirs for the measurement of water flow in open channels under free flow conditions. It is technically identical with and reproduced from ISO 3846:1989. (CE-024)
AS 3778.5.21991 Dilution methodsIntegration method for the measurement of steady flow (ISO 552-2:1987) 13pp
This Standard specifies methods for the measurement of water flow in channels under steady flow conditions by the dilution method using a known amount of tracer. It is technically identical with and reproduced from ISO 555-2:1987. (CE-024)
AS 3778.3.12001 Velocity-area methodsMeasurement by current meters and floats (ISO 748:1997) 41pp
This Standard is identical to and has been reproduced from ISO 748:1997. (CE-024)
AS 3778.4.31991 Measurement using flow gauging structuresRound-nose horizontal broadcrested weirs (ISO 4374:1990) 18pp
Specifies the method of measuring water flow in rivers and artificial channels under steady flow conditions using round-nose horizontal broad-crested weirs. It is technically identical with and reproduced from ISO 4374:1990. (CE-024)
AS 3778.5.32007 Liquid flow in open channels and partly filled pipesGuidelines for the application of Doppler-based flow measurements (ISO/TS 15769:2000) 23pp
This Standard is identical to and reproduced from ISO/TS 15769:2000, Hydrometric determinationsLiquid flow in open channels and partly filled pipesGuidelines for the application of Doppler-based flow measurements. (CE-024)
AS 3778.4.41991 Measurement using flow gauging structuresV-shaped broad-crested weirs (ISO 8333:1985) 16pp
Specifies a method for the measurement of sub-critical flow in small rivers and artificial channels using Vshaped broad-crested weirs. It is technically identical with and reproduced from ISO 8333:1985. (CE-024)
AS 3778.6.11992 Measuring devices, instruments and equipmentRotating element currentmeters (ISO 2537:1988) 5pp
Specifies the operational requirements, construction, calibration, and maintenance of rotating element devices for the measurement of flow velocities in open channels. It does not define the form of the signal produced by the equipment or the signal receiving equipment. It is identical with and has been reproduced from ISO 2537:1988. (CE-024)
AS 3778.3.41990 Velocity-area methodsCollection and processing of data for determination of errors in measurement (ISO 1088:1985) 21pp
Amendment 1 10 June 1991 Specifies a standard basis for the collection and processing of data for the determination of individual components of the total error in the measurement of water flow in open channels by velocity-area methods. It is technically identical with and reproduced from ISO 1088:1985. (CE-024)
AS 3778.4.51991 Measurement using flow gauging structuresTriangular profile weirs (ISO 4360:1984) 13pp
Specifies the method of measuring water flow in open channels under steady flow conditions using triangular profile weirs. It is technically identical with and reproduced from ISO 4360:1984. (CE-024)
AS 3778.4.62007 Measurement using flow gauging structuresFlat-V weirs (ISO 4377:2002) 35pp
describes the methods of measurement of flow in rivers and artificial channels under steady or slowly varying conditions using flat-V weirs. It also gives guidance on acceptable velocity distribution. (CE-024)
AS 3778.6.21992 Measuring devices, instruments and equipmentDirect depth sounding and suspension equipment (ISO 3454:1983) 4pp
Specifies functional requirements of sounding and suspension equipment used in the direct measurement of depth and velocity of flow in open channels, including the collection of sediment samples. It applies to equipment used for sounding of water depth by the direct method and to equipment for suspending measuring or sampling instruments (for example, current meter or sediment sampler) at the point of measurement. It does not apply to indirect methods such as echo sounding. It is identical with and has been reproduced from ISO 3454:1983. (CE-024)
AS 3778.4.71991 Measurement using flow gauging structuresRectangular, trapezoidal and Ushaped flumes (ISO 4359:1983) 51pp
This Standard specifies methods for the measurement of water flow in rivers and artificial channels under steady or slowly varying flow conditions, using certain types of standing-wave (or critical depth) flumes. It is technically identical with and reproduced from ISO 4359:1983. (CE-024)
AS 3778.6.31992 Measuring devices, instruments and equipmentCalibration of rotating element current-meters in straight open tanks (ISO 3455:1976) 8pp
Specifies the procedure to be used for the calibration of current-meters, i.e. for the experimental determination of the relationship between water velocity and rate of revolution of the rotating element. It also specifies the type of tank and equipment to be used and the method of presenting the results. The procedure does not take into account any possible differences existing between the behaviour of the current-meter moving in motionless water and that of a fixed current-meter in turbulent flow. It is identical with and has been reproduced from ISO 3455:1976. (CE-024)
AS 3778.4.101991 Measurement using flow gauging structuresEnd-depth method for estimation of flow in rectangular channels with a free overfall (ISO 3847:1977) 7pp
Specifies a method for the estimation of sub-critical flow of water in smooth, straight, rectangular prismatic open channels with a vertical drop and discharging freely. It is technically identical with and reproduced from ISO 3847:1977. (CE-024)
AS 3778.3.82007 Velocity-area methodsElectromagnetic method using a full-channel-width coil (ISO 9213:2004) 19pp
Specifies procedures for the establishment and operation of a gauging station, equipped with an electromagnetic flow meter, in an open channel or a closed conduit with a free water surface. (CE-024)
AS 3778.4.111991 Measurement using flow gauging structuresEnd-depth method for estimation of flow in non-rectangular channels with a free overfall (approximate method) (ISO 4371:1984) 11pp
Specifies a method for the estimation of sub-critical flow of water in smooth, essentially horizontal, straight open channels with a vertical drop and discharging freely. It is technically identical with and reproduced from ISO 4371:1984. (CE-024)
AS 3778.6.41992 Measuring devices, instruments and equipmentEcho sounders for water depth measurements (ISO 4366:1979) 6pp
Provides information concerning the principle of operation, performance and selection criteria for echo sounders used in depth measurements for open channel flow (and related) measurements. The use of standard terminology is promoted. Information on the characteristics of sound in water is provided in an annex. It is identical with and has been reproduced from ISO 4366:1979. (CE-024)
AS 3778.4.11991 Measurement using flow gauging structuresThin-plate weirs (ISO 1438-1:1980) 27pp
Specifies methods for the measurement of water flow in open channels using rectangular and triangularnotch (V-notch) thin-plate weirs. The flow conditions considered are limited to steady, free and fully ventilated discharge. It also specifies limitations of applicability related to weir and flow geometry for the recommended equations. It is technically identical with and reproduced from ISO 1438-1:1980. (CE-024)
AS 3778.5.11991 Dilution methodsConstant-rate injection method for the measurement of steady flow (ISO 555-1:1973) 16pp
Specifies methods for the measurement of water flow in channels under steady flow conditions by the dilution method using constant-rate injection. It is techni-
AS 3778.6.52001 Measuring devices, instruments and equipmentWater level measuring devices (ISO 4373:1995) 23pp
This Standard is identical to and has been reproduced from ISO 4373:1995. (CE-024)
137
AS 3778.6.62008
AS 3778.6.62008 Measuring devices, instruments and equipmentCableway systems for stream gauging (ISO 4375:2000) 26pp
Provides general description, functional requirements, specification and guidelines for the design, and for the operation and maintenance of a cableway system used for stream gauging. (CE-024)
AS 3782.21990 Methods for stated values for individual machines (ISO 7574-2:1985) 2pp
Provides guidelines for determining the labelled values of the noise emissions of individually labelled machinery and equipment. Identical with and reproduced from ISO 7574-2:1985. (AV-006)
AS 3785.51998 Headframes
13pp
Specifies design requirements for headframes and skyshafts, for use in mine winding installations. (ME-018)
AS 3778.6.71992 Measuring devices, instruments and equipmentUltrasonic (acoustic) velocity meters (ISO 6418:1985) 13pp
Describes the general design, operation, performance and application of ultrasonic (acoustic) velocity meters for measurement of flow in open channels. It is identical with and has been reproduced from ISO 6418:1985. (CE-024)
AS 3782.31990 Simple (transition) method for stated values for batches of machines (ISO 7574-3:1985) 2pp
Provides guidelines for determining noise emission values of machinery and equipment for those labelling the devices, and specifies a simple method for verifying compliance of the noise emission of a batch of equipment. Identical with and reproduced from ISO 7574-3:1985. (AV-006)
AS 3785.72006 Sheaves
16pp
AS 3778.6.81992 Measuring devices, instruments and equipmentPosition fixing equipment for hydrometric boats (ISO 6420:1984) 9pp
Specifies methods of determining the position of hydrometric boats with respect to known points on the banks of rivers and estuaries. It is identical with and has been reproduced from ISO 6420:1984. (CE-024)
AS 3782.41990 Methods for stated values for batches of machines (ISO 7574-4:1985) 14pp
This method provides guidelines for determining noise emission values of machinery and equipment for those labelling the devices, and specific statistical sampling procedures for verifying compliance of the noise emissions of a batch of equipment. Identical with and reproduced from ISO 7574-4:1985. (AV-006)
Sets out requirements for sheaves in mine winding systems. Covers materials, manufacture, design, nondestructive testing and marking. Appendices provide information on rim dimensional proportions, surface stress between rope and sheave, sheave diameter and allowable wear for sheave rims without inserts. (ME-018)
AS 3778.72008 Determination of volume of water and water level in lakes and reservoirs (ISO/TR 11330:1997) 8pp
Sets out the survey of the topography of lakes and reservoirs for the determination of volume of line storage and the determination of water level. (CE-024)
AS 37831990 Data storage and transfer mediaCD-ROM Data interchange on read-only 120 mm optical data disks (ISO/IEC 10149:1989) 43pp
Specifies the characteristics of read-only 120 mm optical data disks for information interchange between information processing systems and for information storage, called CDROM. This Standard is identical with and reproduced from ISO/IEC 10149:1989. (IT-001)
13pp
AS 37791990 Height setting micrometers and riser blocks (ISO 7863:1984) 6pp
Specifies the characteristics of height-setting m with a measuring capacity up to 600 mm and a minimum scale value not greater than 2 m together with riser blocks up to 600 mm in height. Test methods for the accuracy of instruments are given in Annexes. It is identical with, and reproduced from, ISO 7863. (ME-027)
AS 3784 Coatings for fire protection of building elements AS 3784.11990 Guide to selection and installation of sprayed mineral coatings 17pp
Sets out recommendations for the selection and installation of sprayed mineral coatings for the fire protection of building elements. A density test for the coating is provided in an appendix. (FP-019)
Amendment 1 5 April 1995 Amendment 2 5 December 1995 Amendment 3 9 November 2001 Amendment 4 22 April 2004 Specifies the requirements for the design and performance of electrically operated smoke alarms containing detection and alarm facilities. It also allows, but does not require, for the inclusion within the smoke alarm facilities for interconnection with other units or accessories. Where such facilities are included, the Standard specifies requirements for the connection interface. It is not intended that this interface be used for connection to remote monitoring stations. The Standard applies to smoke alarms for installation within residential accommodation where connection to remote monitoring is not required. (FP-002)
AS 3785 Set2007 Underground miningShaft equipment Set 148pp AS 3785 Underground miningShaft equipment AS 3785.12006 Shaft overwind safety catch system 9pp
AS 3787 General requirements for single-use, sterile, plasticized polyvinyl chloride (PVC) packs for human blood AS 3787.11997 Single blood packs 67pp
AS 37801994 The storage and handling of corrosive substances 37pp Available Superseded
Sets out requirements and recommendations for the safe storage and handling, including disposal, of corrosive substances, i.e. substances that meet the Class 8 classification criteria of the ADG Code. The Standard may also apply to dangerous goods, other than those of Class 2, that have a Class 8 Subsidiary Risk assigned to them. A discussion of the hazards presented by corrosive substances and a bibliography of documents providing guidelines on the preparation of emergency plans are provided in appendices. (CH-009)
Sets out requirements for overwind safety catch systems in vertical shaft drum winding and friction winding installations. Covers materials, design, testing and certificates. Appendices provide guidelines on the information to be provided by the purchaser and the supplier. (ME-018)
Specifies requirements for sterilized, non-vented, collapsible, plasticized polyvinyl chloride (PVC) single blood packs for the collection, storage, transportation and administration of whole blood. Does not apply to blood bag systems used for the freezing of red cells. (HE-021)
9pp
Specifies requirements for arresting systems in vertical shaft friction winding installations, including materials, design and testing. Appendices include guidelines on information to be provided by the purchaser and the supplier, and on the arrestor operating distance. (ME-018)
71pp
6pp
AS 3782 AcousticsStatistical methods for determining and verifying stated noise emission values of machinery and equipment AS 3782.11990 General considerations and definitions (ISO 7574-1:1985) 4pp
Defines terms relating to methods for determining and verifying the labelled values of the noise emitted by machinery and equipment. Identical with and reproduced from ISO 7574-1:1985. (AV-006)
Specifies requirements for gripper systems in vertical mine shafts having timber conveyance guides and drum winder installation and cover design, materials and testing. Appendices provide guidelines on the information to be provided by the purchaser and the supplier. (ME-018)
Specifies requirements for multiple blood pack systems comprising two or more sterilized, non-vented, collapsible, interconnected plasticized polyvinyl chloride (PVC) blood collection packs and satellite packs for the collection of whole blood, the preparation of blood components, and the storage, transportation and administration of whole blood and blood components. Does not apply to blood pack systems used for the freezing of red cells. (HE-021)
11pp
Specifies requirements for conveyances used in vertical-shaft mine-winding installations, including fixtures on the conveyance, but not suspension pins for connecting head rope, tail rope attachments or gripper assemblies. Information that should be provided by the purchaser and supplier are given in appendices. (ME-018)
138
Amendment 1 17 January 1992 Specifies requirements for the following general ward linen items used in health care facilities and institutions: flat sheets, draw sheets, break bed sheets, pillow cases, towels, nappies, feeders, laundry bags and kitchen aprons. Specification details showing finished dimensions, materials and manufacturing requirements are listed for each of these items. (TX-015)
AS 3792 Ride-on lawnmowers AS 3792.11990 Powered rotary ride-on mowers (ISO 5395:1990)
29pp
71pp
Amendment 1 17 January 1992 Specifies requirements for the following items of theatre linen for health care facilities and institutional uses: drapes, fenestrated drapes, theatre gowns, hand towels, leggings (mayo table covers), and wrappers. Requirements for the inspection and repair of used theatre linen and for the assembly of theatre linen prepacks are also specified. (TX-015)
Amendment 1 9 December 1991 Specifies requirements for the design and construction of powered rotary ride-on mowers with a width of cut not exceeding 1250 mm. The requirements specified relate to the safety and robustness of the mower and are checked by the test methods included in appendices. (CS-033)
AS 37981996 Guidelines on earthworks for commercial and residential developments 36pp Available Superseded
Specifies guidelines for the execution and control testing of earthworks and associated site preparation works within commercial and residential developments. (CE-027)
AS 3794 Computer graphicsProgrammer's Hierarchical Interactive Graphics System (PHIGS) language bindings AS 3794.11991 FORTRAN (ISO/IEC 9593-1:1990)
10pp
Specifies requirements for the dimensions, materials and manufacture of apparel for operating theatre staff. Items of apparel specified are theatre dresses, twopiece suits, warm-up jackets, warm-up gowns and theatre boots. Boiler suits and pants suits are not specified. (TX-015)
213pp
Specifies a language independent nucleus of a graphics system. For integration into a programming language, PHIGS is embedded in a language-dependent layer obeying the particular conventions of that language (FORTRAN). This Standard is identical with and reproduced from ISO/IEC 9593-1:1990. (IT-003)
AS/NZS 3800:2005 Electrical equipment for explosive atmospheresRepair and overhaul 99pp
Amendment 1 29 April 2005 Amendment 2 1 June 2005 Sets out requirements for repair and overhaul of electrical equipment used in hazardous areas, which are defined in AS/NZS60079.10 for gases and AS/NZS61241.10 for dusts. It covers equipment having a group designation of Group I for coal mining and Group II for all other industries where flammable gases and vapours may be present. It covers all types of explosion-protection techniques and specifies requirements for repair and overhaul service facilities. (EL-014)
12pp
Specifies requirements for four types of woven wool blankets, heavyweight, standard weight, lightweight, and cellular, for use in health care facilities and institutions. (TX-015)
285pp
This Standard specifies a language independent nucleus of a graphics system. For integration into a programming language, PHIGS is embedded in a language dependent layer obeying the particular conventions of that language. This part of the Standard specifies such a language dependent layer for the Ada computer programming language. It is identical with and reproduced from ISO/IEC 9593-3:1990. (IT-006)
15pp
AS 37951996 Copper alloy tubes for plumbing and drainage applications 11pp
Specifies requirements for round seamless copper alloy tubes, designated as either brass which is intended primarily for sanitary plumbing and stormwater drainage services, or copper nickel which is intended primarily for water services. The ranges of nominal sizes are DN 10 to DN 150 inclusive for Type B brass, and DN 32 to DN 150 inclusive for Type D brass and DN 10 to DN 80 inclusive for Type B copper nickel. Details of dimensions and tolerances, chemical composition, temper and form of material, testing and marking are specified. The appendices propose purchasing guidelines, safe working pressure, testing pressure, and hydrostatic test. (WS-018)
Specifies requirements for cotton, cotton/synthetic and synthetic fabrics which are to be used in health care facilities and institutions. (TX-015)
AS/NZS 3801:1995 Electronic data interchange for administration, commerce and transport (EDIFACT) Application level syntax rules (ISO 9735:1988, ISO 9735:1988/Amd 1:1992) 25pp Available Superseded
Specifies syntax rules for the preparation of messages to be interchanged in the fields of administration, commerce and transport. This Standard is identical with and has been reproduced from ISO 9735:1988 (amended reprint 1990 and incorporating Amendment 1:1992). (IT-001)
16pp
Specifies requirements for the finished dimensions, materials and manufacturing of nightgowns and pyjamas for adult use, and utility gowns for baby, infant, child and adult use. (TX-015)
4pp
Specifies minimum performance requirements for unused recyclable barrier fabrics. (TX-015)
AS 38051991 Electronic data interchange for administration, commerce and transport (EDIFACT) Forms designBasic layout (ISO 8439:1990) 3pp
Specifies overall sizes, image areas, their division and data fields for printed forms or forms in electronically transferable format for use in administration, commerce and transport. This Standard is technically identical with and has been reproduced from ISO 8439:1990. (IT-001)
Amendment 1 9 August 1991 Amendment 2 14 March 1994 Specifies general requirements for the manufacture, heat treatment, and finish of hand hammers intended for striking of wood, metal, concrete, masonry, or stone. Tolerances for the fit of the handle and for the mass of the head are given, and tests for soundness of assembly are prescribed. (ME-010)
21pp
Provides guidance on the principles of effective management of an organizations compliance with its legal obligations, as well as any other relevant obligations such as industry and organizational standards, principles of good governance and accepted community and ethical norms. The principles cover commitment to achieving compliance, implementation of a compliance program, monitoring and measuring of compliance, as well as continual improvement. (QR-014)
22pp
AS/NZS 3808:2000 Insulating and sheathing materials for electric cables 22pp
Amendment 1 Amendment 2 10 July 2002 30 August 2004
139
AS/NZS 3809:1998
Specifies the tests and criteria, referenced in particular Standards, for elastomeric, PVC, reduced fire hazard and polyolefin insulating and sheathing materials used in the construction of electric cables and flexible cords. It does not cover tests that can only be conducted on completed cables. (EL-003) Sets out requirements for the identification, segregation, handling, storage, transport, treatment and ultimate safe disposal of clinical and related wastes which may be hazardous, in an environmentally responsible manner. Wastes arising from medical, nursing, dental, veterinary, laboratory, pharmaceutical, podiatry, tattooing, body piercing and mortuary practices, inter alia, are dealt with in the Standard. (HE-011)
AS 3819 Heavy duty towing components AS 3819.11998 70 mm and 110 mm diameter towballs for heavy duty couplings 11pp
Specifies classification, design, interchangeability of dimensions with tolerances, finish, marking requirements for 70 mm and 110 mm towballs, which are used for the towing of trailers above 3.5 t in tension and compression. A dynamic test is given in an appendix. (ME-053)
23pp
Specifies performance requirements and procedures for testing secure storage units of the type intended for use in commercial, industrial, mercantile, financial and insurance institutions, and the like, and that are relied upon to protect the contents from intrusion and forced removal. The secure storage units include free-standing safes, built-in safes (floor and wall), strongroom doors and strongrooms (with or without a door). This Standard excludes electronic packages (other than electronic locks) and other devices that may be attached to the secure storage unit or vault. These requirements are intended to establish the resistance to forced removal and intrusion resistant rating of secure storage units according to attack by prescribed tools. This Standard does not cover tests for fire resistance. (MS-058)
AS/NZS 3817:1998 AcousticsMethods for the description and physical measurement of single impulses or series of impulses (ISO 10843:1997) 23pp
Describes preferred methods for the description and the physical measurement of single impulsive sounds or short series of impulsive sounds and for the presentation of the data. It does not provide methods for interpreting the potential effects of series of impulses of noise on hearing, community response or structures. This Standard is identical with and has been reproduced from ISO 10843:1997. (EV-010)
AS 3819.21998 Heavy duty coupling bodies for 70 mm and 110 mm towballs 10pp
Specifies classification, design, interchangeability of dimensions with tolerances, finish, and marking requirements for a coupling body for 70 mm and 110 mm towballs, which are used for the towing of trailers above 3.5 t in tension and compression. A pull-out test and a dynamic test are given in appendices. (ME-053)
AS/NZS 3810 Safes and strongroomsMethods of test AS/NZS 3810.0:1998 Introduction and list of methods AS/NZS 3810.1:1998 Test for physical attack 1p
(MS-058)
AS/NZS 3820:1998 Essential safety requirements for low voltage electrical equipment 5pp
Amendment 1 30 January 2004 Specifies a set of outcomes-oriented criteria for the safety of electrical equipment for use by electrical regulators in relation to products for which regulatory approval before sale is not required (non-declared articles). This Standard is intended to be consistent with the criteria of the European Union low voltage directive. (QR-012)
18pp
Sets out the physical attack methods to forcibly gain partial or complete access to the interior of a secure storage unit. (MS-058)
Specifies general requirements for visually graded heavy engineering timber products. It includes clauses on moisture content, measurement of characteristics, grade limitations and marking. Lists of species appropriate for particular uses are included in an Appendix. (TM-003)
17pp
3pp
Sets out the method to be applied when measuring the leverage resistance of any anchoring bolt-down facility recommended by the manufacturer of the secure storage unit. (MS-058)
Specifies visual grading rules and dimensional tolerances for rail track sleepers, special sleepers for lead, crossing or turnout timbers and bridge transoms. Fgrades are given for use in the design of bridge transoms. This Standard is to be used in conjunction with AS3818.1. (TM-003)
AS/NZS 3821:1998 Cassettes for medical X-ray diagnosis Radiographic cassettes and mammographic cassettes (IEC 60406 Ed. 3.0 (Bilingual 1997)) 15pp
Specifies dimensions for the commonly used range of cassettes for radiographic and mammographic procedures. This Standard is identical with and has been reproduced from IEC 60406:1997. (HE-003)
5pp
Specifies the method to be applied when testing secure storage units for explosive designation (EX). This is an optional test. (MS-058)
AS 3818.32001 Piles
19pp
19pp
Amendment 1 5 August 1998 Specifies the minimum performance requirements for hardwired patient alarm systems and gives guidance on their maintenance requirements. It applies to systems usually installed in high dependency health care establishments and may apply to specialist establishments such as aged-care facilities and hostels. It does not apply to telecommunications-based systems using telephone diallers or PABX equipment, or to non-hard-wired systems. Appendices are provided which specify the performance requirements of optional features and give guidance on variations applicable to low-dependency care facilities. (TE-016)
Specifies requirements for the visual grading and selection of timber for use as piling in marine applications (salt or brackish water) or in other than marine applications (land or fresh water). This Standard refers to AS 3818.1 for general product requirements and grading methods and is to be read in conjunction with that Standard. (TM-003)
7pp
Specifies visual grading rules and dimensional tolerances for timber cross-arms intended for use as supports for overhead utility service cables. Two grades of cross-arms are described and an optional top surface grade is also given. F-grades are given for use in the structural design. This Standard is to be used in conjunction with AS 3818.1. (TM-003)
AS/NZS 3823 Performance of electrical appliances Airconditioners and heat pumps AS/NZS 3823.1.1:1998 Test MethodsNon-ducted airconditioners and heat pumpsTesting and rating for performance (ISO 5151:1994) 46pp
Amendment 1 7 May 2001 Amendment 2 15 August 2002 Amendment 3 24 February 2006 Specifies the testing Standards for room airconditioners. This Standard is technically equivalent to and reproduced from ISO 5151:1994. (EL-015)
AS 38122005 Laboratory glasswareBoiling flasks with interchangeable conical ground glass joints (ISO 4797:2004) 3pp
Adopts ISO4797:2004 to specify a series of boiling flasks with interchangeable conical ground joints for general laboratory purposes. (CH-001)
5pp
Specifies product requirements for mine lift cages in mine shafts. Grade rules and tolerances are given. This Standard refers to AS 3818.1 for general product requirements and lists of species for timber. (TM-003)
8pp
48pp
Specifies strength, durability and stability as well as marking requirements for plastic monobloc chairs. This Standard was developed by the Plastics and Chemicals Industry Association in conjunction with the now Australasian Furnishing Research and Development Institute. (CS-091)
Specifies product requirements for decking used to surface wharves and bridges. Grade rules and tolerances are given. This Standard refers to AS 3818.1 for general requirements and lists of species. (TM-003)
AS/NZS 3823.1.2:2001 Test methodsDucted airconditioners and air-to-air heat pumpsTesting and rating for performance (ISO 13253:1995) 49pp
Amendment 1 12 August 2002 Amendment 2 23 May 2003 Amendment 3 25 February 2006 Amendment 4 21 October 2008 Specifies the conditions on which the capacity and energy consumption of factory-made residential, commercial and industrial, electrically driven, mechanicalcompression, single-package and split-system, ducted airconditioners employing air- and water-cooled condensers and ducted heat pumps employing air-cooled condensers are based. The Standard also specifies the test methods to be applied for determining the capacity and efficiency ratings. It covers equipment utilizing one or more refrigeration systems, one outdoor unit and one or more indoor units controlled by a single thermostat/controller, as well as equipment utilizing
8pp
Proposes grading rules and other requirements for stumps and sole plates used for foundations for houses. Both hardwoods and softwoods are covered with clauses on preservative treatment and marking. Guidance for ordering is given in an appendix. (TM-003)
140
11pp
AS/NZS 3823.1.3:2005 Water-source heat pumpsWater-to-air and brine-to air heat pumpsTesting and rating of performance(ISO13256-1, Ed.01 (1998) MOD) 43pp
Specifies performance testing and rating criteria for factory-made residential, commercial and industrial, electrically-driven, mechanical-compression type, water-to-air and brine-to-air heat pumps. (EL-015)
Sets out requirements applying to verification of compliance of calculated or measured values of lighting parameters, from interior and exterior lighting systems, with specified or target values for these parameters. The requirements are the minimum considered necessary to ensure that calculated or measured values of lighting parameters are of an acceptable accuracy. (LG-012)
AS/NZS ISO 3834 Quality requirements for fusion welding of metallic materials AS/NZS ISO 3834.1:2008 Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005) 7pp
(WD-003)
AS/NZS 3823.2:2005 Energy labelling and minimum energy performance standard (MEPS) requirements 61pp
Amendment 1 30 June 2006 Amendment 2 21 August 2006 Amendment 3 29 February 2008 Specifies the energy labelling requirements for singlephase non-ducted airconditioners of the vapour compression type for household use, and the minimum energy performance standard (MEPS) requirements for single-phase and three-phase airconditioners of the vapour compression type up to a rated cooling capacity of 65 kW and which fall within the scope of AS/NZS 3823.1.1 or AS/NZS 3823.1.2 or AS/NZS 3823.1.3. (EL-015)
AS/NZS ISO 3834.3:2008 Standard quality requirements (ISO 3834-3:2005) AS/NZS ISO 3834.4:2008 Elementary quality requirements (ISO 3834-4:2005)
9pp
(WD-003)
AS/NZS 3829:1998 WoolIWTO Staple Test Regulations (IWTO Staple Test Regulations)
20pp
Amendment 1 5 June 1999 Sets out IWTO regulations relating to sampling and testing staples of greasy wool for the terms of IWTO Staple Test Certificate and IWTO Combined Staple Test Certificates. This Standard is identical with and has been reproduced from the IWTO Staple Test Regulations. (TX-012)
3pp
(WD-003)
AS/NZS 3823.3:2002 Calculation of performance for minimum energy performance standard (MEPS) requirements 21pp
Specifies procedures for calculating the performance of factory-made residential, commercial and industrial, electrically driven, mechanical compression, single-package and split-system, ducted and non-ducted airconditioners for determining their compliance with minimum energy performance standard (MEPS) requirements specified in AS/NZS 3823.2. (EL-015)
AS/NZS ISO 3834.5:2008 Documents with which it is necessary to conform to claim conformity to the quality requirements of AS/NZS ISO 3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4 (ISO 3834-5:2005) 8pp
(WD-003)
Specifies the key technical and commercial requirements for supply of the principal grades of ferromanganese products used in Australia. (MN-006)
AS/NZS 3835 Earth potential riseProtection of telecommunications network users, personnel and plant AS/NZS 3835.1:2006 Code of practice 33pp
AS 3830.21998 Ferrochromium
4pp
AS/NZS 3824:1998 Guidelines for radiotherapy treatment rooms design (IEC/TR 61859 Ed. 1.0 (Bilingual 1997)) 9pp
Applies to those aspects of a radiotherapy installation which ensure the safety of the patient, the equipment operator and other persons present during the period in which the equipment is in use. General construction requirements are not addressed. This Standard is identical with and has been reproduced from IEC 61859:1997. (HE-003)
Specifies the key technical and commercial requirements for the supply of the principal grades of ferrochromium products used in Australia. (MN-006)
Specifies requirements and code of practice to minimize hazards due to earth potential rise for the protection of telecommunications network users, personnel and plant. (ET-007)
AS 3830.31998 Ferrosilicon
4pp
Specifies the key technical and commercial requirements for the supply of the principal grades of ferrosilicon products used in Australia. Ferrosilicon used in the dense-medium separation method of minerals is not included. (MN-006)
99pp
Specifies recommendation and code of practice for the application of the EPR Code of practice for the protection of persons or plant prescribed in AS/NZS 3835.1. (ET-007)
AS/NZS 3825:1998 Procedures and devices for the removal and disposal of scalpel blades from scalpel handles 5pp
Sets out performance characteristics of devices used in, and procedures for, the removal and disposal of scalpel blades and similar instruments from scalpel handles. (HE-011)
AS 3830.41998 Ferrosilicomanganese
4pp
Specifies the key technical and commercial requirements for the supply of the principal grade of ferrosilicomanganese product used in Australia. (MN-006)
7pp
Specifies definitions for commonly used waste terms such as those involving collection, sorting, disposal, recycling, waste stream, waste management and waste minimization. The definitions are aimed at generic waste rather than specific product groups, in order to be suitable to various industries and institutions as well as households. For terms specific to clinical or paper waste, refer to the relevant Standards. Terms more generally related to the environment are not included. (EV-006)
AS/NZS 3837:1998 Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter 30pp
Sets out a test method for the determination of ignitability, heat release rates, mass loss rates, effective heat of combustion and smoke release of materials and products when exposed to controlled levels of radiant heating. (FP-018)
AS/NZS 3827 Lighting system performanceAccuracies and tolerances AS/NZS 3827.1:1998 Overview and general recommendations 49pp
Identifies the factors that influence variability in lighting performance and gives recommendations on how such variability may be contained within tolerable limits in the specification, calculation and measurement of interior and exterior lighting systems. Provides advice on the comparison of calculated/measured values of lighting parameters with specified or target values, taking into account the uncertainties of calculation/measurement. Sets out typical uncertainties that might be expected for various elements of lighting calculations/measurements, together with total uncertainties for the overall design. (LG-012)
AS/NZS 3838:2006 Helmets for horse riding and horse-related activities 12pp
Specifies requirements for protective helmets for horse riding and horse-related activities, intended to mitigate the effects of an impact to the head. It includes construction, testing and labelling requirements. (CS-096)
AS/NZS 3833:2007 The storage and handling of mixed classes of dangerous goods, in packages and intermediate bulk containers 76pp
Provides requirements and recommendations for the storage and handling of mixed classes of dangerous goods, in packages and intermediate bulk containers (IBCs), where two or more classes or divisions of dangerous goods are kept in the same store. Includes segregation of dangerous goods within the store, safe separation distances, fire protection and emergency procedures. (CH-009)
AS 38391998 Evaluation of aftermarket disc pads for passenger vehicles and their derivatives 3pp
Applies to replacement automotive disc brake pad assemblies, intended for passenger car vehicles and their derivatives, and specifies the minimum requirements to ensure that the disc pad assemblies perform satisfactorily. (ME-054)
141
AS 3840.11998
AS 3840 Pressure regulators for use with medical gases AS 3840.11998 Pressure regulators and pressure regulators with flow-metering devices 29pp
Specifies requirements for compressed gas regulators and compressed gas regulators with flow-metering devices for use in the medical gas industry. This Standard aligns closely with ISO 10524:1995 and EN 7381:1997 with magnification and clarification of the test procedures and their test results. (ME-002)
AS 3848 Filling of portable gas cylinders AS 3848.11999 Decant filling of medical air and oxygen into portable cylindersSafe procedures 11pp
Specifies the procedures to enable the safe filling of portable cylinders to be undertaken and details the methods of decant filling of medical air and decant filling of medical oxygen. The Standard emphasises the need for trained staff only to execute these procedures and draws attention to dangers associated with these filling practices. (ME-002)
AS/NZS 3856 Hoists and ramps for people with disabilities Vehicle-mounted AS/NZS 3856.1:1998 Product requirements 15pp
Specifies design and performance requirements for appliances which incorporate a platform, ramp, sling, seat or harness, for use by people with disabilities in boarding and alighting from motor vehicles. Covers only those appliances that are attached to a vehicle. (ME-067)
AS/NZS 3841:1998 Guide 61: General requirements for assessment and accreditation of certification/registration bodies (ISO/IEC Guide 61:1996) 11pp
Provides general requirements for bodies operating accreditation systems; intended to promote equivalence of national systems and facilitate mutual recognition between such bodies which are concerned with the recognition of competence. This Standard is identical with and has been reproduced from ISO/IEC Guide 61:1996 (also published as the Handbook, SAA/NZS HB18.61:1996). (QR-010)
AS 3848.21999 Filling of portable cylinders for selfcontained underwater breathing apparatus (SCUBA) and non-underwater selfcontained breathing apparatus (SCBA) Safe procedures 13pp
Amalgamates AS 27041984 and AS 27051984 providing safe procedures for the filling of SCUBA and SCBA portable cylinders. The Standard also defines the pressure limitations on the valves used on these cylinders, together with details of the minimum information to be marked permanently on the valves. (ME-002)
5pp
Specifies installation requirements in vehicles for the types of hoists and ramps covered in Part 1. (ME-067)
AS/NZS 3842:1998 Guide 62: General requirements for bodies operating assessment and certification/registration of quality systems (ISO/IEC Guide 62:1996) 11pp
Provides requirements which are intended to ensure that certification bodies operate third-party certification/registration systems in a consistent and reliable manner, thereby facilitating their acceptance on a national and international basis. This Standard is identical with and has been reproduced from ISO/IEC Guide 62:1996 (also published as the Handbook, SAA/NZS HB18.62:1996). (QR-010)
AS/NZS 3849:1999 WoolIWTO Condition Testing Regulations for Wool Tops 17pp
Sets out the IWTO regulations relating to the sampling and condition testing of wool tops and the issue of IWTO conditioning certificates for such wools. (TX-012)
29pp
55pp
Sets out requirements for the planning, design, casting, transportation and erection of tilt-ip panels. (BD-066)
Specifies requirements for the design, manufacture, installation, testing and operation of fixed guideway people movers. (ME-066)
AS/NZS 3843:1998 Guide 65: General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996) 8pp
Provides general requirements for bodies operating a system for third-party product certification (which may include a process or service) as a means of assurance that the system complies with specified Standards and other normative documents. This Standard is identical with and has been reproduced from ISO/IEC Guide 65:1996 (also published as the Handbook SAA/SNZ HB18.65:1998). (QR-010)
AS 38511991 The calculation of short-circuit currents in three-phase a.c. systems (IEC 60909 Ed. 1.0 (Bilingual 1988)) 88pp
Amendment 1 16 March 1992 Specifies standard methods for the calculation of shortcircuit currents in three-phase a.c. systems, both radial and meshed with and without contribution from generators and motors, which are suitable for either computer or manual calculation. (EL-007)
8pp
Specifies material, construction, installation and safety requirements for spa baths. (WS-003)
AS/NZS 3862:2002 External fusion-bonded epoxy coating for steel pipes 55pp
Provides purchasers and manufacturers of steel pipes with a specification for external fusion-bonded epoxy coating of steel pipes for protection against corrosion. (ME-038)
AS 38441998 Recommended practice for metal analysis by electrochemical stripping techniques 25pp
Sets out recommendations for the selection of stripping techniques suitable for the determination of the concentration of metals. (CH-010)
AS 3853 Health and safety in welding and allied processesSampling of airborne particles and gases in the operators breathing zone AS 3853.12006 Sampling of airborne particles (ISO 10882-1:2001)
AS/NZS 3863:2002 Galvanized mild steel wire for armouring cables 6pp
Specifies requirements for galvanized cold-drawn mild steel wire of round cross-section used for the armouring of electric and telecommunication cables. (EL-003)
29pp
118pp
Sets out requirements for roadside devices that provide some degree of redirection and containment capability when impacted by a vehicle, or provide controlled absorption of the kinetic energy of a vehicle that is on a collision course. The Standard also provides users with issues when specifying the installation, erection, maintenance and test methods for these devices to achieve an acceptable level of performance. (CE-033)
Adopts ISO 10882-1:2001 to provide a method for sampling and analysis of particulate matter in welding fume. (CH-031)
AS 38641997 Medical refrigeration equipmentFor the storage of blood and blood products 44pp
Amendment 1 5 February 1998 Specifies requirements for the manufacture of medical refrigeration equipment such as reach-in cabinets and walk-in rooms for the storage of blood and blood products in the temperature range 2C to 6C, and for the storage of frozen blood plasma at a temperature of -25C or lower, within an ambient temperature range of 10C to 43C. (HE-020)
21pp
Adopts ISO 10882-2:2000 to provide methods for analysis of the gaseous component of welding fume (CH-031)
AS 38462005 The handling and transport of dangerous cargoes in port areas 132pp
Sets out requirements and recommendations for the handling and transport of dangerous cargoes in port areas, including facilities, berths and operations. Safety measures include repair work on ships and at shore installations, emergency procedures and fire protection. (ME-081)
AS 3854 Performance standards in building AS 3854.11990 Contents and presentation (ISO 6240:1980)
AS 38651991 Calculation of the effects of short-circuit currents (IEC 60865 (1986)) 38pp
Amendment 1 15 July 2003 Specifies standard methods for the calculation of the electromagnetic and thermal effects of short-circuit currents in rigid and flexible conductors, and the resulting forces on structures and supports. (EL-007)
2pp
AS/NZS 3847 Shopping trolleys AS/NZS 3847.1:1999 For general use 22pp
Sets out guidelines for the contents and presentation of performance standards. This Standard is identical with and reproduced from ISO 6240:1980. (BD-000)
Amendment 1 22 March 2002 Specifies materials, construction, performance and testing requirements for shopping trolleys. (CS-016)
AS 3854.21990 Principles for their preparation and factors to be considered (ISO 6241:1984) 10pp
Sets out the principles and factors to be considered in the preparation of performance Standards. This Standard is identical with and reproduced from ISO 6241:1984. (BD-000)
142
AS/NZS 3869:1999 Domestic solid fuel burning appliances Design and construction 27pp
Specifies requirements for the construction of solid fuel burning heaters and related domestic appliances. Requirements include design, performance and construction materials. Also included are requirements for appliances utilizing catalytic combustors and those used for water heating purposes. This Standard does not cover the requirements for installation nor does it address the power output, efficiency, or the level of pollutant flue gas emissions which are covered by other Standards. (CS-062)
AS 38761991 Information processingGuidelines for the documentation of computer-based application systems (ISO 6592:1985) 17pp
Establishes guidelines for the documentation of computerbased application systems. It also contains checklists with the aim of supporting effective activities throughout the system life cycle. It is identical with and has been reproduced from ISO 6592:1991. (IT-001)
AS 3891 Air navigationCables and their supporting structuresMarking and safety requirements AS 3891.12008 Permanent marking of overhead cables and their supporting structures for other than planned low-level flying 7pp
Specifies requirements for permanent marking of overhead cables and their supporting structures for visual warning to pilots of aircraft. (EL-010)
AS 38691991 Domestic solid fuel burning appliances Specifications 21pp Available Superseded
Specifies requirements for the safe design and construction of solid fuel burning heaters and related domestic appliances. Requirements include design, performance and construction materials. Also included are requirements for appliances utilizing catalytic combustors and those used for water heating purposes. This Standard does not cover the requirements for installation nor does it address the power output, efficiency, or the level of pollutant flue gas emissions. (CS-062)
AS 3891.22008 Marking of overhead cables for planned low-level flying operations 6pp
Specifies requirements for permanent and temporary visual warning marking of overhead cables and supporting structures for planned low-level flying operations (EL-010)
42pp
AS 38701991 Certified reference materialsGeneral guide to material selection, preparation, testing and certification (ISO Guide 30, ISO Guide 31:1981, ISO Guide 35:1989) 13pp
Provides broad guidelines for the selection of a suitable source material, and its subsequent preparation, testing and certification as a reference material intended for use in the calibration of apparatus, the assessment of a method of analysis, or for assigning compositional values to related materials. (CH-023)
AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings 25pp
Describes the requirements for solvent cements and priming fluids used in the jointing of tapered/interference and parallel/no or low interference fit polyvinyl chloride (PVCU and PVC-M) and acrylonitrile butadiene styrene (ABS) pipes and fittings for both pressure and non-pressure applications. (PL-021)
Specifies requirements and guidance on the installation of pressure equipment (boilers, pressure vessels and pressure piping), control, and safety equipment in accordance with AS/NZS 1200 and Standards referenced therein, together with other relevant Standards. It recognizes the growing use of management systems to ensure the initial and continued safe, reliable performance of pressure plants. (ME-001)
AS 3893 Information processing systemsText communicationRemote Operations AS 3893.11991 Model, notation and service definition (ISO/IEC 9072-1:1989) 35pp
Defines a Remote Operation (RO) notation for defining the services provided to interactive applications. This Standard also defines the services provided by the Remote Operation Service Element (ROSE) services. This Standard is identical with and has been reproduced from ISO/IEC 9072-1:1989. (IT-001)
AS 38721991 Orthopaedic implantsGeneral requirements for marking, packaging and labelling (ISO 6018:1987) 2pp
Specifies general requirements for the marking, packaging and labelling of orthopaedic implants supplied either sterile or as manufactured, i.e. prior to sterilization. This Standard is identical to and reproduced from ISO 6018:1987. (HE-012)
14pp
Sets out methods for the measurement of the flow properties of coal, primarily for the design of bins and chutes. (MN-001)
12pp
28pp
Specifies reference methods for the size analysis of coal by manual sieving (wet or dry), using test sieves of aperture sizes between 125 mm and 45 m. The Standard is identical with and has been reproduced from ISO 1953:1994. (MN-001)
Specifies the protocol (abstract syntax) and procedures for the Remote Operation Service Element (ROSE). These procedures are defined in terms of the interactions between peer ROSE protocol machines through the use of RTSE services or the presentation service and the interactions between the ROSE protocol machine and its service-user. This Standard is identical with and has been reproduced from ISO/IEC 90722:1989. (IT-001)
AS 3894 Site testing of protective coatings AS 3894.02002 Introduction and list of test methods 1p
AS 38831991 Computer graphicsComputer Aided Design (CAD)Guide for structuring of computer graphic information (BS 1192.5:1990) 16pp
Gives guidance on the representation of construction by computers primarily for the purpose of generating drawings and the exchange of data between CAD users. This Standard is identical to and reproduced from BS 1192:Part 5:1990. (IT-006)
Provides a listing of the various test methods of the AS 3894 series for site testing of protective coatings. (CH-003)
8pp
Specifies the identification methods for coding of pictorial information in digital form. It does not specify the contents of the data field of a picture entity. The field may also contain audio and/or animation data. This Standard is identical with and has been reproduced from ISO/IEC 9281.1:1990. (IT-001)
AS 38751991 Information technologyProgram constructs and conventions for their representation (ISO/IEC 8631:1989) 7pp
Describes the uses of procedure-oriented algorithms. It defines the nature of program constructs, indicates the manner
AS/NZS 3889:1993 Rubber and plasticsAnalysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:1981) 3pp
Specifies three methods of calculating, after test, the tear strength and adhesion strength of vulcanised rubber or fabrics coated with, or adhered to, rubber or plastics. Identical with and reproduced from ISO 6133:1981. (ME-056)
143
AS 3894.32002
AS 3894.32002 Determination of dry film thickness
software or software-based products. This Standard is identical with and reproduced from ISO/IEC/ TR 9294:1990. (IT-001)
27pp
Provides practical test methods for the on-site determination of the range of thicknesses and the mean dry film thickness of a protective coating system, or its component coats, upon a metallic structure or fabrication. (CH-003)
9pp
AS 38981991 Information processingUser documentation and cover information for consumer software packages (ISO 9127:1988) 7pp
Describes the user documentation and cover information supplied with consumer software packages. This Standard is identical with and reproduced from ISO 9127:1988. (IT-001)
AS 3905.91996 Guide to AS/NZS ISO 9001:1994 for telecommunications call charging and call billing 60pp
Provides guidance for the telecommunications industry on the application of quality management Standard AS/NZS ISO 9001:1994 to call charging and billing. The application of the various quality system elements is described in terms common to the industry and typical examples are given. (QR-002)
Provides guidance on practical procedures, for use in the field, to assess the degree of cure or through-dry in coatings. (CH-003)
7pp
AS 3905.101997 Guide to AS/NZS ISO 9001:1994 for the finance industry 58pp
Provides guidance for the finance industry, including the banking, credit union, building society and financial adviser sectors on the interpretation and application of AS/NZS ISO 9000 quality system Standards. The application of the various requirements is described in terms relevant to the finance industry. Typical application examples are given, drawn from practical experience within the industry. (QR-002)
Provides practical procedures for use in the field, to evaluate the surface profile of a prepared metal substrate to which a protective coating is to be applied. (CH-003)
AS 3904 Quality management and quality system elements AS 3904.31994 Guidelines for processed materials (ISO 9004-3:1993)
21pp
Provides a guide to quality system elements applicable to processed materials, such as bulk products, and discusses means of ensuring effective quality management. Based on and similar in scope to AS 3904.1/NZS 9004.1/ISO 9004.1 Guidelines. This Standard is identical with and reproduced from ISO 9004-3:1993. Identical with NZS 9004.3. (QR-008)
AS 3905.111998 Guide to AS/NZS ISO 9002:1994 for the motor vehicle maintenance and repair industry 20pp
Provides guidance for the motor vehicle maintenance and repair industry on the application of quality system Standard AS/NZS ISO 9002:1994. The guide is written from the perspective of the small workshop and describes the normal practices and how they relate to AS/NZS ISO 9002:1994 in straightforward terms using language and examples appropriate for the industry. (QR-002)
31pp
3pp
Provides a practical procedure for estimating in the field a descriptive level of the gloss of a coated surface using painted gloss reference samples. (CH-003)
Provides a set of management guidelines for implementing continuous quality improvement within an organization. Describes tools and techniques for a quality improvement methodology based on data collection and analysis. This Standard is identical with and reproduced from ISO 9004-4:1993. Identical with NZS 9004.4:1994. (QR-008)
AS/NZS 3905.12:1999 Guide to AS/NZS ISO 9001 for architectural and engineering design practices 64pp
Provides guidance on the application of AS/NZS ISO 9001 to architectural and engineering design practices, and similar designers and consultants practising in the construction industry. It includes guidance on the development of effective quality systems for use within a practice. (QR-002)
9pp
Provides a method for evaluating and testing the adhesion of existing coating systems to their substrate while in their service environment. (CH-003)
AS 3905 Quality system guidelines AS 3905.11991 Guidelines to AS 3901/NZS 9001/ISO 9001 for chemical and allied industries 15pp
Provides guidelines for the use of AS 3901 in the process industries such as petroleum, food, mining, building materials, adhesives and sealants, detergents, cosmetics, pharmaceuticals, inks and paints. Technically identical to the Chemical Industries Association (UK) Guidelines for ISO 9001, EN 29001 and BS 5750. (QR-008)
AS 3905.151998 Guide to AS/NZS ISO 9001:1994 for the accountancy profession 48pp
Provides guidance for the accountancy profession on the application of quality system Standard AS/NZS ISO 9001:1994. The application of the various quality system elements is described in terms common to the accountancy profession and typical examples in the accounting environment are included. (QR-002)
AS 3894.112002 Equipment report AS 3894.122002 Inspection reportCoating AS 3894.132002 Inspection reportDaily AS 3894.142002 Inspection reportDaily painting
100pp
(CH-003)
100pp
(CH-003)
42pp
100pp
(CH-003)
100pp
(CH-003)
Provides guidelines for the implementation of quality systems and quality improvement programs in hospitality industries such as hotels, motels, clubs, restaurants and caterers, based on the requirements of AS 3901/NZS 9001/ISO 9001. Developed jointly by Standards Australia/Standards New Zealand and Tourism Training Australia, it provides links to training programs in the hospitality industry and the 'Excellence in Hospitality' program. (QR-002)
AS 3895 Methods for the analysis of copper, lead, zinc, gold and silver ores AS 3895.11991 Determination of gold (Fire assayFlame AAS method) 9pp
Sets out a fire assayAAS method for the determination of gold in copper, lead, zinc, gold and silver ores. (MN-005)
AS/NZS 3905.4:1995 Guide to quality system Standards AS/NZS ISO 9001:1994 and AS/NZS ISO 9002:1994 for the pressure equipment industry 35pp
Provides guidance to the pressure equipment industry on the application of quality system Standards AS/NZS ISO 9001:1994 and AS/NZS ISO 9002:1994. The application of each requirement is explained in terms understood in the industry. Typical examples are included to assist in understanding the requirements. (QR-008)
Amendment 1 5 October 1995 Amendment 2 5 September 1999 Specifies requirements for the assurance of product quality in the manufacture of boilers, pressure vessels, piping and associated equipment. It covers both regulatory and purchaser requirements and proposes varying degrees of external design verification and fabrication inspection for manufacturers, both with and without an accredited quality system. Requirements are also related to hazard levels of the equipment determined on the basis of risk analysis. (ME-001)
AS/NZS 3896:2008 WatersExamination for Legionella spp. including Legionella pneumophila 15pp
(FT-020)
AS/NZS 3905.7:1995 Guide to AS/NZS ISO 9001:1994 for the road freight transport industry 57pp
This Standard provides guidance for the road freight transport industry on the application of quality system Standard AS/NZS ISO 9001:1994. The application of various quality system elements is described in terms understood in the industry and typical examples are included. (QR-002)
AS 38971991 Information processingGuidelines for the management of software documentation (ISO/IEC TR 9294:1990) 7pp
Offers guidance on the management of software documentation to those managers responsible for the production of
6pp
Provides guidance on the development, preparation, content and presentation of software quality assurance plans (SQAPs). This Standard is identical with and has been reproduced from ANSI/IEEE 730.11989. (QR-008)
144
AS/NZS 3947.4.3:2000 Contactors and motor-startersA.C. semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3 Ed. 1.0 (Bilingual 1999)) 64pp
Applies to a.c. semiconductor non-motor load controllers and contactors intended for performing electrical operations by changing the state of a.c. electric circuits between the ON-state and the OFF-state. They may include a series mechanical switching device and are intended to be connected to circuits, the rated voltage of which does not exceed 1000 V a.c. This Standard is identical with and reproduced from IEC 60947-43:1999. (EL-006)
AS 39531996 Loading guide for dry-type power transformers (IEC 60905 Cor. Ed. 1.0 (1991), IEC 60905 Ed. 1.0 (Bilingual 1987)) 26pp
Provides guidance and loading recommendations to naturally cooled dry-type transformers complying with AS 2735, and gives the method of calculating loading conditions. It also describes how dry-type transformers can operate without exceeding the acceptable limit of deterioration of insulation through thermal effects. It is identical with and reproduced from IEC 905:1987 and its Corrigendum 1991. (EL-008)
AS 39401990 Quality controlGuide to the use of control chart methods including Cusum techniques 54pp
Amendment 1 10 August 1992 Amendment 2 16 August 1993 Provides guidance on the selection and use of control charts for quality management, and is complementary to AS 3941, AS 3942 and AS 3943 which provide detailed operational procedures. Explains how control charts work, the application of average run length to control charting and the procedure for determining process capability. Outlines the probability models and sampling statistics underlying these charting methods. (QR-008)
AS/NZS 3947.5.3:2000 Control circuit devices and switching elementsRequirements for proximity devices with define behaviour under fault conditions (IEC 60947-5-3 Ed. 1.0 (Bilingual 1999)) 25pp
Applies to proximity devices with an enhanced resistance to fault. Specifies requirements for four different types of PDF: PDF with desifned reliability; PDF with test capability, PDF with single fault tolerance and PDF with self-monitoring. This Standard is identical with and reproduced from IEC 60947-5-3:1999. (EL-006)
AS 3954 Motor vehicle controlsAdaptive systems for people with disabilities AS 3954.11991 General requirements 8pp
Specifies design, construction and installation requirements for hand controls, pedal extensions, leftfoot accelerators, extensions of hand-operated controls, and steering wheel attachments. Electromechanical-type driving controls are not included. (ME-067)
AS/NZS 3947.5.5:2000 Control circuit devices and switching elementsElectrical emergency stop device with mechanical latching function (IEC 60947-5-5 Ed. 1.0 (Bilingual 1997)) 11pp
Applies to electrical control circuit devices and switching elements with mechanical latching function, which are used to provide an emergency stop signal. Provides detailed specifications relating to the electrical and mechanical construction of such devices and their testing. This Standard is identical with and reproduced from IEC 60947-5-5:1997. (EL-006)
219pp
Specifies the form and establishes the interpretation of programs written in the C programming language. This Standard is identical with and has been reproduced from ISO/IEC 9899:1990. (IT-015)
29pp
Provides a guide to the use and understanding of the Shewhart system of control charts as one method for statistical control of a process. Identical with ISO 8258:1991. (QR-008)
AS/NZS 3947 Low-voltage switchgear and controlgear AS/NZS 3947.3:2001 Switches, disconnectors, switchdisconnectors and fuse-combination units (IEC 60947-3 Ed. 2.0 (Bilingual 1999), IEC 60947-3 Amd.1 Ed. 2.0 (Bilingual 2001), IEC 60947-3 Ed. 2.0 Cor.1 (Bilingual 1999)) 47pp
Applies to switches, disconnectors, switchdisconnectors and fuse-combination units to be used in distribution circuits and motor circuits of which the rated voltage does not exceed 1000 V a.c. or 1500 V d.c. Specifies characteristics of equipment, conditions with which the equipment shall comply with reference to operation and behaviour in normal service and specified abnormal conditions and dielectric properties, tests for confirming that these conditions have been met and the methods to be adopted for these tests and the information to be marked on the equipment or supplied by the manufacturer. This Standard is identical to and reproduced from IEC 60947-3:1999 and includes variations made to this document by its Corrigendum:1999/07 and Amendment 1:2001. (EL-006)
AS/NZS 3947.5.6:2000 Control circuit devices and switching elementsD.C.interface for proximity sensors and switching amplifiers (NAMUR) (IEC 60947-5-6 Ed. 1.0 (Bilingual 1999)) 11pp
Applies to proximity sensors connected for operation by a two-wire connecting cable to the control input of a switching amplifier. The switching amplifier contains a d.c. source to supply the control circuit and is controlled by the variable internal resistance of the proximity sensor. This Standard is identical with and reproduced from IEC 60947-5-6:1999. (EL-006)
AS 3956 Information processing systems130 mm optical disk cartridge, write once, for information interchange AS 3956.11991 Unrecorded optical disk cartridge (ISO/IEC 9171-1:1990)
40pp
Specifies the characteristics of 130 mm optical disk cartridges of the type providing for information to be written once and read many times. This Standard is identical with and has been reproduced from ISO/IEC 9171-1:1990. (IT-001)
AS/NZS 3947.6.1:2001 Multiple Function equipmentAutomatic transfer switching equipment (IEC 60947-6-1 Ed. 1.0 (Bilingual 1989), IEC 60947-6-1 Amd.1 Ed. 1.0 (Bilingual 1994), IEC 60947-6-1 Amd.2 Ed. 1.0 (Bilingual 1997), IEC 60947-6-1:1989/Corr.1:1991) 34pp
Applies to automatic transfer switching equipment to be used in emergency power systems with interruption of the supply to the load during transfer, the rated voltage of which does not exceed 100 V a.c. or 1500 V a.c. Specifies characteristics of equipment, conditions with which the equipment must comply, tests intended to confirm these conditions have been met and data to be marked on the equipment and/or provided by the manufacturer. This Standard is identical with and has been reproduced from IEC 60947-6-1:1989 plus Corrigendum:1991 plus Amendment 1:1994 and Amendment 2:1997. (EL-006)
57pp
Specifies two formats for the physical disposition of the tracks and sectors, the error correction codes, the modulation methods used for recording and the quality of the recorded signals. This Standard is identical with and has been reproduced from ISO/IEC 91712:1990. (IT-001)
AS/NZS 3957:2006 Light-transmitting screens and curtains for welding operations 22pp
Sets out the safety and physical requirements for lighttransmitting screens and curtains intended to provide protection against hazardous radiations generated during welding processes while simultaneously affording visual contact with the working position. (SF-006)
AS/NZS 3947.3 Supplement 1:2001 Switches, disconnectors, switchdisconnectors and fuse-combination unitsFuse-switch-disconnectors and switch-disconnectors for use with lowvoltage aerial bundled cables (Supplement to AS/NZS 3947.3:2001) 20pp
Specifies requirements for fuse-switch-disconnectors and switch-disconnectors for use with low-voltage aerial bundled cable systems in distribution circuits with a rated voltage of 400 V a.c. line to line. It is closely aligned with the requirements of AS/NZS 3947.1 and based on AS/NZS 3947.3. (EL-006)
AS 3958 Ceramic tiles AS 3958.12007 Guide to the installation of ceramic tiles 106pp
Provides guidance on the preparation of the background and the fixing and grouting of floor and wall tiles and mosaic tiles. Information for application in swimming pools, gradients on floors, screeds and rendering, and cleaning and maintenance is also included. (BD-044)
145
AS 3958.11991
AS 3958.11991 Guide to the installation of ceramic tiles 67pp Available Superseded
Amendment 1 17 January 1992 Provides guidance on the selection of the fixative and the preparation of the background, and sets out various methods for the fixing of ceramic tiles, based on the type of fixative to be used, for both floor and wall applications. (BD-044) requirements of AS 3964.11992. This Standard is identical with, and has been reproduced from, ISO/IEC 9596-2:1993, including Technical Corrigendum 1:1993. (IT-001) tape recorders (VTRs) and other equipment, such as cameras, where parallel component video signals are involved. Reference is made to relevant CCIR (International Radio Consultative Committee) Reports. (CT-002)
AS 39651991 Information technologyOpen Systems InterconnectionCommon management information service definition (ISO/IEC 9595:1991) 27pp
Amendment 1 5 March 1996 Defines an application service element (the common management information service element), which may be used by an application process in a centralized or decentralized management environment to exchange information and commands for the purpose of systems management. This Standard is identical with and has been reproduced from ISO/IEC 9595:1991. (IT-001)
10pp
Amendment 1 25 July 2007 Specifies requirements for hydraulic cements consisting of portland cement or of mixtures of portland cement and one or both of fly ash and ground granulated iron blast-furnace slag. (BD-010)
25pp
93pp
AS 3965 Supplement 11995 Information technologyOpen Systems InterconnectionCommon management information service definitionAccess control (Supplement to AS 39651991) (ISO/IEC 9595:1991/Amd.4:1992) 2pp
Extends the common management information service definition to include access control. This Standard is identical with and has been reproduced from ISO/IEC 9595:1991/Amd.4:1992. (IT-001)
Specifies requirements for materials, construction, performance, testing and labelling for chairs which are intended for use in showers and toilets. Included are mobile shower/commode chairs, static commode chairs and stools, and static chairs and stools for use in showers. Does not cover the use of chairs in swimming pools or other highly corrosive environments. (ME-067)
AS 3967 Information processingSGML support facilitiesTechniques for using SGML AS 3967.11991 SGML Tutorial (ISO/IEC TR 9573:1988)
10pp
124pp
Specifies requirements for thin-walled wrought aluminium irrigation tube used to transport water at temperatures below 50C in systems where the operating pressure is less than 1 MPa. (MT-003)
Complements AS 3514 by providing additional tutorial information. It is not intended, and should not be regarded, as an extension, modification, or interpretation of AS 3514. The SGML language contains a number of components, some of which are optional features. The tutorial information covers the main components of the language only; notably a discussion of LINK, CONCUR, and DATATAG is outside the scope of this Standard. The intended audience is mainly document type designers already familiar with the basic concepts of SGML, but requiring more tutorial information on techniques for using SGML for various applications. Subclauses 5.3 and 8.4 are written in the style of a "User Guide" and can be used as a basis for end-user documentation. This Standard is technically identical with, and has been reproduced from, ISO/IEC/TR 9573:1988. (IT-027)
AS 3976 Information processingPortable Operating System Interface (POSIX) AS 3976.11991 System Application Program Interface (API) C Language (ISO/IEC 9945-1:1990) 340pp
Defines a standard operating system interface and environment to support application portability at the source-code level. This Standard is identical with and reproduced from ISO/IEC 9945-1:1990. (IT-015)
49pp
Sets guidelines for use by designers, manufacturers and operators of marinas for recreational and commercial vessels up to 50 metres in length. Fixed berth and floating pontoon marina systems, single pontoons and floating wave attenuators are included. Guidance is also given for on-shore facilities such as dry boat storage, boatlifts, boat ramps and parking facilities. (CE-030)
AS/NZS 3967.11:1994 Application at ISO Central Secretariat for international Standards and technical reports (ISO/IEC TR 9573-11:1992) 73pp
Defines the elements required, generic identifiers, attributes and their structure for international Standards and technical reports (ISO Central Secretariat SGML application), and also contains the formal SGML document type definition. This Standard is identical with, and has been reproduced from, ISO/IEC TR 9573-11:1992. (IT-001)
AS 3977 Information processing systemsHigh Density Digital Recording (HDDR) AS 3977.11991 Unrecorded magnetic tape for HDDR applications (ISO/IEC 8441-1:1991) 27pp
Specifies requirements for unrecorded magnetic tape designed for High Density Digital Recording (HDDR). This Standard is identical with and reproduced from ISO/IEC 8441-1:1991. (IT-001)
AS 3964 Information technologyOpen Systems InterconnectionCommon management information protocol AS 3964.11992 Specification (ISO/IEC 9596-1:1991)
AS/NZS 3967.13:1994 Public entity sets for mathematics and science (ISO/IEC TR 9573-13:1991) 83pp
Defines character entity sets for some of the widely used special graphic characters. The entity repertoires are based on applicable published and proposed international Standards for coded character sets. This Standard is identical with, and has been reproduced from, ISO/IEC TR 9573-13:1991. (IT-001)
31pp
Specifies the minimum performance levels necessary for the effective interchange of information using high density digital recording (HDDR). This Standard is identical with and reproduced from ISO/IEC 84412:1991. (IT-001)
33pp
Amendment 1 5 March 1996 Specifies a protocol which is used by application layer entities to exchange management information including procedures for the transmission of management information between application entities, the abstract syntax of the common management information protocol and the associated encoding rules to be applied, procedures for the correct interpretation of protocol control information and the conformance requirements to be met by implementation of this Standard. This Standard is identical with and has been reproduced from ISO/IEC 9596-1:1991. (IT-001)
AS 39691991 Information technologyTelecommunications and information exchange between systems OSI Routing Framework (ISO/IEC/TR 9575:1990) 12pp
Provides a framework in which OSI protocols for routing may be developed and which expedites the progression of routing protocols through the standardization processes. This Standard is technically identical with and has been reproduced from ISO/IEC/TR 9575:1990. (IT-001)
13pp
Sets out recommendations and requirements for the design, construction and operation of pools, for use by and management of persons whose conditions require hydrotherapy. (MS-051)
AS/NZS 3964.2:1994 Protocol implementation conformance statement proforma (ISO/IEC 9596-2:1993, ISO/IEC 95962:1993/Cor 1:1993) 62pp
Provides the protocol implementation conformance statement proforma in compliance with the relevant
AS 39711991 Television camerasParallel component video interface for non-composite ENG signals 4pp
Specifies electrical and mechanical characteristics of the interface between electronic news gathering (ENG) video-
AS 39801999 Guide to the determination of gas content of coalDirect desorption method 23pp
Describes methods for the determination of the gas content of coal by desorption, using samples obtained by surface drilling and from underground. (MN-001)
146
66pp
AS 39932003 Equipment for the pasteurization of milk and other liquid dairy productsContinuous-flow systems 18pp
Sets out requirements for the design and critical operation of equipment, including control recording instrumentation used for continuous-flow pasterization at temperatures between 60C and 100C of milk and other liquid dairy products. (FT-027)
Amendment 1 5 August 1999 Amendment 2 11 October 2000 Amendment 3 30 March 2005 Comprises general conditions of contract suitable for application in a wide variety of construction and building contracts including civil, mechanical, electrical and other types of engineering contracts. (MB-010)
12pp
66pp
AS 39831991 Metal drums for insulated electric cables and bare conductors 10pp
Specifies the requirements for metal drums for the transport and storage of insulated electric cables, bare conductors or other products for which the drums are suitable. (EL-003)
Comprises general conditions of contract suitable for application in a wide variety of construction and building contracts including civil, mechanical, electrical and other types of engineering contracts.
3pp
Specifies the dimensions of internal and external drive squares for hand-operated socket wrenches. Technically equivalent to ISO 1174. (ME-010)
AS 39841991 Manipulating industrial robotsPerformance criteria and related test methods (ISO 9283:1990) 36pp
Describes methods of specifying and testing the performance characteristics of manipulating industrial robots. This Standard is identical with and has been reproduced from ISO 9283:1990. (IT-006)
AS 3985 Manipulating industrial robotsMechanical interfaces AS 3985.11991 Circular (form A) (ISO 9409-1:1988)
AS 4001 Motor vehiclesRear marker plates AS 4001.12003 Manufacturing and classification requirements for Class 1A and Class 1 reflective plates 25pp
Specifies manufacturing requirements and defines production processes, classification graphics and text design, materials and performance requirements for Class 1A and Class 1 rear marker plates of both rectangular and strip configurations. (ME-053)
2pp
Defines the main dimensions, designation and marking for the circular mechanical interface (form A). This Standard is identical with and has been reproduced from ISO 9409-1:1988. (IT-006)
AS 39861991 Manipulating industrial robotsCoordinate systems and motions (ISO 9787:1990) 5pp
Defines and specifies three robot coordinate systems. This Standard is identical with and has been reproduced from ISO 9787:1990. (IT-006)
34pp
Specifies requirements for access covers and grates for use in vehicular and pedestrian areas. It applies particularly to components manufactured from grey and ductile irons and cast and manufactured steels and other materials, and access covers and grates having clear openings ranging from 100mm to 1300mm. It is intended for use by designers, purchasers, manufacturers and installers of access covers and grates. (CE-029)
AS 4001.22003 Fitting requirements for Class 1A, Class 1 and Class 2 reflective plates 14pp
Specifies fitting requirements for rear marker plates complying with AS 4001.1 and AS 4001.3. (ME-053)
AS 4001.32003 Manufacturing and classification requirements for Class 2 reflective plates 21pp 2pp
Specifies manufacturing requirements and defines production processes, classification, graphics and text design, materials and performance requirements and test methods for Class 2 rear marker plates of both rectangular and strip configuration. (ME-053)
AS 39881991 Copper, lead, zinc, gold and silver oresGuide to sample preparation for the determination of gold 16pp
Specifies guidance on methods for the preparation of samples of gold-bearing ore for the determination of gold content. (MN-005)
Amendment 1 12 October 1992 Specifies a system for the classification of fireresistant hydraulic fluids. The Standard is technically equivalent to ISO 6743-4:1982. (ME-035)
AS 4002 Hydraulic fluid powerParticulate contamination of systems AS 4002.12001 Method of coding the level of contamination (ISO 4406:1999) 7pp
Sets out a classification code for the particulate contamination of the hydraulic fluid power system. This Standard is identical with and has been reproduced from ISO 4406:1999. (ME-035)
87pp
Applies to the design, fabrication, erection, repair and alteration of steelwork associated with boilers, pressure vessels, lifts, cranes, mining equipment, gas and liquid petroleum piping systems, bulk handling equipment, and the like in accordance with the working stress design method, but does not apply to road and rail bridges, material less than 3 mm thick, steel for which the design yield stress exceed 450 MPa, and cold-formed members other than those complying with AS 1163. (ME-005)
AS 4002.22001 Extraction of fluid samples from an operating system (ISO 4021:1992) 6pp
Sets out procedures for the extraction of hydraulic fluid samples from an operating hydraulic fluid power system. This Standard is identical with and has been reproduced from ISO 4021:1992. (ME-035)
8pp
Specifies chemical, fibre and physical requirements for paper, which would be expected to survive long periods of time without deterioration if stored and used under normal library and archival conditions. Based on and reproduced from ISO 9706:1994. (MS-048)
1622pp
147
AS 40042006
AS 40042006 Lighting booths for visual assessment of colour and colour matching 8pp
Gives colorimetric, photometric and physical requirements for lighting booths that provide an environment suitable for colour assessment and matching in accordance with AS 1580.601.1. (CH-003)
25pp
Provides definitions and uniform requirements for software review and audit processes. This Standard is identical with and reproduced from ANSI/IEEE Std 10281988. (IT-015)
AS 40151992 Information technologyTelecommunications and information exchange between systems Operation of an X.25 interworking unit (ISO/IEC TR 10029:1989) 5pp
Describes the function of the interworking unit (IWU) in terms of the mapping between protocol data (PDUs) that it receives from one interface, and PDUs that it then transmits, which could be on either interface of the IWU. This Standard is identical with and has been reproduced from ISO/IEC/TR 10029:1989. (IT-001)
14pp
Sets out methods of analysis for determining non-soap surface active matter, anionic active matter and soap, in detergents. (CS-002)
AS 4016 Information processing systemsText communicationReliable transfer AS 4016.11992 Model and service definition (ISO/IEC 9066-1:1989)
14pp
24pp
Specifies the minimum training activities and terminal objectives required for the training and accreditation of persons who wish to dive using self-contained underwater breathing apparatus (SCUBA) for recreational pruposes. Medical requirements for such purposes are given in an Appendix. (CS-083)
Defines the services provided by the reliable transfer service element (RTSE). The RTSE services are provided by the use of the RTSE protocol in conjunction with the association control service element (ACSE) services and the ACSE protocol, and the presentationservice. This Standard is identical with and has been reproduced from ISO/IEC 9066-1:1989. (IT-027)
AS 4005.1 Supplement 12000 Minimum entry-level SCUBA diving Medical form for prospective recreational SCUBA divers 200pp
Comprises the medical questionnaire and medical examination forms, along with the advice to the examining physician, published in pad form. (CS-083)
AS/NZS 4012:1999 Domestic solid fuel burning appliance Method for determination of power output and efficiency 19pp
Specifies a method for the determination of the average efficiency and average thermal power output from batch feed domestic solid fuel burning appliances. (CS-062)
64pp
AS 4005.1 Supplement 22000 Minimum entry-level SCUBA diving Statement of health for recreational diving 200pp
Comprises the form for the medical practitioner to use to report a person's fitness to dive following a medical examination of the prospective diver published in selfcarbon pad form. (CS-083)
AS/NZS 4013:1999 Domestic solid fuel burning applicances Method for determination of flue gas emission 22pp
Specifies a method and requirements for determining the rate of particulate emission from batch feed solid fuel burning appliances. (CS-062)
Specifies the protocol (abstract syntax) and procedures for the reliable transfer service element (RTSE) services. These procedures are defined in terms of the interactions between peer RTSE protocol machines through the use of association control service element and the presentation-service and the interactions between the RTSE protocol machine and its serviceuser. This Standard is identical with and has been reproduced from ISO/IEC 9066-2:1989. (IT-027)
AS/NZS 4014 Domestic solid fuel burning appliancesTest fuels AS/NZS 4014.1:1999 Hardwood 4pp
AS 40171992 Information technologyOpen Systems InterconnectionVirtual terminal basic class service (ISO 9040:1990) 78pp
Amendment 1 5 March 1996 Defines, in an abstract way, the externally visible basic class virtual terminal service within the OSI application layer in terms of a model defining the interaction between users of the service, the primitive actions and events of the service, the parameter data associated with each primitive action and event and the relationship between, and the valid sequence of, these actions and events. This Standard is identical with and has been reproduced from ISO 9040:1990. (IT-001)
Specifies a test method for assessing hardwood test fuels used when determining the power output, efficiency and particulate emission of domestic solid fuel appliances. (CS-062)
5pp
Specifies the minimum training activities and terminal objectives required for the training and accreditation of assistant SCUBA instructors for recreational SCUBA diver training activities. (CS-083)
4pp
Specifies a test method for assessing softwood test fuels used when determining the power output, efficiency and particulate emissions of domestic solid fuel burning appliances. (CS-062)
AS 4017 Supplement 11995 Information technologyOpen Systems InterconnectionVirtual terminal basic class serviceAdditional functional units (Supplement to AS 40171992) (ISO 9040:1990/Amd.2:1992) 14pp
Specifies additional functional units to the virtual terminal (VT) basic class service that provide display object update with ripple, reporting of exception conditions by the VTservice-provider and the selective retention of VT-context between negotiation of successive VTEs. This Standard is identical with and has been reproduced from ISO 9040:1990/Amd.2:1992. (IT-001)
11pp
Specifies the minimum training activities and terminal objectives required for the training and accreditation of recreational SCUBA instructors. (CS-083)
2pp
Specifies a test method for assessing lignite briquette test fuels used when determining the power output, efficiency and particulate emissions of domestic slid fuel burning appliances. (CS-062)
11pp
Specifies the minimum training activities and terminal objectives required for the training and accreditation of recreational SCUBA instructor trainers. (CS-083)
2pp
Specifies a test method for assessing sub-bituminous coal test fuels used when determining the power output, efficiency and particulate emissions of domestic solid fuel burning appliances. (CS-062)
AS 4018 Information technologyOpen Systems InterconnectionVirtual terminal basic class protocol AS 4018.11992 Specification (ISO 9041-1:1990)
39pp
Describes a set of basic test documents which are associated with the dynamic aspects of software testing (i.e., the execution of procedures and code). This Standard is identical with and reproduced from ANSI/IEEE Std 8291983. (IT-015)
2pp
65pp
Specifies test method for assessing semi-anthracite coal briquettes used when determining the power output, efficiency and particulate emission of domestic solid fuel burning appliances. (CS-062)
7pp
3pp
Specifies the necessary information content of, and recommended organization for, a software design description. A software design description is a representation of a software system that is used on a medium for communicating software design information. This Standard is identical to and reproduced from ANSI/IEEE Std 10161987. (IT-015)
Specifies test methods for assessing pellet test fuels used when determining the power output efficiency and particulate emission of domestic solid fuel appliances. (CS-062)
Amendment 1 5 March 1996 Specifies a set of procedures for the connectionoriented transfer of data, control and reference information between protocol machines which implement the functions of a provider of the basic class virtual terminal service and the two modes in which those procedures operate. This Standard is identical with and has been reproduced from ISO 9041-1:1990. (IT-001)
AS 4018.1 Supplement 11995 SpecificationAdditional functional units (Supplement to AS 4018.11992) (ISO 9041-1:1990/Amd.2:1992) 8pp
Specifies additional functional units to the virtual terminal (VT) basic class protocol that enhance the capability of the VT-environment, extend the set of objects
148
33pp
AS/NZS 4019 Information technologyOpen Systems InterconnectionThe Directory AS/NZS 4019.1:1996 Overview of concepts, models and services (ISO/IEC 9594-1:1995) 20pp
Specifies the concepts of the Directory and the directory information base as well as presenting an overview of the services and capabilities which they provide. This Standard is identical with and has been reproduced from ISO/IEC 9594-1:1995. (IT-001)
Specifies the replication capabilities provided by the Directory system agents to improve the level of service to Directory users. This Standard is identical with and has been reproduced from ISO/IEC 9594-9:1995. (IT-001)
37pp
Specifies the Directory access protocol, the Directory system protocol, the Directory information shadowing protocol and the Directory operational binding management protocol fulfilling the abstract services specified in other parts of this Standard. This Standard is identical with and has been reproduced from ISO/IEC 9594-5:1995. (IT-001)
AS/NZS 4020:2005 Testing of products for use in contact with drinking water 74pp
Sets out requirements for the suitability of products for use in contact with drinking water. Appendices provide test methods for evaluating those parameters that have the potential to affect the quality of the water. (CH-034)
12pp
Amendment 1 5 March 1996 Specifies the Directory access protocol and the Directory system protocol, fulfilling the abstract services specified in Parts 3 and 4 of this Standard. This Standard is identical with and has been reproduced from ISO/IEC 9594-5:1990. (IT-001)
AS 40211992 Information technologyOpen Systems InterconnectionApplication layer structure (ISO/IEC 9545:1989) 13pp
Refines the basic reference model for OSI to provide a framework for co-ordinating the development of existing and future application layer Standards. In particular it defines the nature of Standards in the application layer and the relationships among them, the architectural framework in which individual OSI application layer protocols shall be developed and the categories of identifiable objects which are necessary for the specification and operation of protocols; and relates distributed information processing activities to the Standards in the application layer. This Standard is identical with and has been reproduced from ISO/IEC 9545:1989. (IT-001)
35pp
153pp
Specifies a number of attribute types which may be found useful across a range of applications of the Directory as well as a number of standard attribute syntaxes and matching rules. This Standard is identical with and has been reproduced from ISO/IEC 95946:1995. (IT-001)
Specifies a number of different models for the Directory to be used as a framework for the other parts of this Standard. This Standard is identical with and has been reproduced from ISO/IEC 9594-2:1995. (IT-001)
AS 40221992 Information technologyOpen Systems InterconnectionPhysical service definition (ISO/IEC 10022:1990) 18pp
Defines the OSI physical service in terms of the primitive actions and events of the Service; the parameters associated with each primitive action and event, and the form which they take; and the interrelationship between and the valid sequences of these actions and events. This Standard is identical with and has been reproduced from ISO/IEC 10022:1990. (IT-001)
18pp
Defines a number of attribute types which may be found useful across a range of applications of the Directory. This Standard is identical with and has been reproduced from ISO/IEC 9594-6:1990. (IT-001)
22pp
Amendment 1 5 March 1996 Provides a conceptual and terminological framework for the other parts of this Standard. The functional and organizational models define ways in which the Directory can be distributed, both functionally and administratively; the security model defines the framework within which security features, such as access control, are provided; and the information model describes the logical structure of the directory information base. This Standard is identical with and has been reproduced from ISO/IEC 9594-2:1990 including Technical Corrigendum 1:1991. (IT-001)
21pp
Specifies a number of attribute sets and object classes which may be found useful across a range of applications of the Directory. This Standard is identical with and has been reproduced from ISO/IEC 9594-7:1995. (IT-001)
12pp
(SF-041)
57pp
Specifies in an abstract way the external visible service provided by the Directory. This Standard is identical with and has been reproduced from ISO/IEC 9594-3:1995. (IT-001)
Amendment 1 5 March 1996 Defines a number of selected attribute sets and object classes which may be found useful across a range of applications of the Directory. These definitions are used by the administrative authority which is responsible for the management of the Directory information. This Standard is identical with and has been reproduced from ISO/IEC 9594-7:1990, and includes Technical Corrigendum 1:1991. (IT-001)
AS 4024.21998 Installation and commissioning requirements for electro-sensitive systems Optoelectronic devices 56pp Available Superseded
Specifies requirements for the installation and commissioning of optoelectronic devices which are to be used for machinery safety applications. (SF-041)
26pp
35pp
Amendment 1 5 March 1996 Defines in an abstract way the externally visible service provided by the Directory. This Standard is identical with and has been reproduced from ISO/IEC 9594-3:1990 including Technical Corrigendum 1:1991. (IT-001)
Specifies a framework for the provision of authentication services by the Directory to its users. These users include the Directory itself as well as other applications and services. This Standard is identical with and has been reproduced from ISO/IEC 9594-8:1995. (IT-001)
AS 4024.31998 Manufacturing and testing requirements for electro-sensitive systems Optoelectronic devices 22pp
Specifies requirements for the manufacture and testing of optoelectronics protective devices which are specifically used for machinery safety applications. (SF-041)
26pp
AS 4024.41998 Installation and commissioning requirements for electro-sensitive systems Pressure-sensitive devices 41pp
Specifies requirements for the installation and commissioning of pressure-sensitive mats, floors, edges and bars which are to be used for machinery safety applications. (SF-041)
AS 4019.41992 Procedures for distributed operation (ISO/IEC 9594-4:1990, ISO/IEC 95944:1990/Cor.1:1991) 46pp
Amendment 1 5 March 1996 Specifies the behaviour of Directory system agents (DSAs) taking part in the distributed Directory appli-
Specifies the form of authentication information held by the Directory; describes how authentication information may be obtained from the Directory; states the assumptions made about how authentication information is formed and placed in the Directory; and defines three ways in which applications may use this authentication information to perform authentication and describes how other security services may be supported by authentication. This Standard is identical with and has been reproduced from ISO/IEC 9594-8:1990 including Technical Corrigendum 1:1991. (IT-001)
AS 4024.51998 Manufacturing and testing requirements for electro-sensitive systemsPressuresensitive devices 57pp
Specifies requirements for the manufacture and testing of pressure-sensitive mats, floors, edges and bars which are to be used for machinery safety applications. (SF-041)
149
AS 4024.11012006
AS 4024.11012006 TerminologyTerms and definitions
Provides a set of terms and definitions for use within other safety of machinery Standards and during discussions relating to machinery safety. (SF-041)
AS 4024.19012006 Displays, controls, actuators and signals Ergonomic requirements for the design of displays and control actuatorsGeneral principles for human interactions with displays and control actuators
Specifies general principles to be followed when designing displays and control actuators on machinery to minimize errors on the part of the operator and to ensure an efficient interaction between the operator and equipment. (SF-041)
AS 4024.19022006 Displays, controls, actuators and signals Ergonomic requirements for the design of displays and control actuatorsDisplays
Specifies the ergonomic requirements for visual, audible and tactile displays for use in machinery. It provides guidance on the selection, design and location of displays to avoid potential ergonomic hazards associated with the use of displays. (SF-041)
AS 4024.17012006 Human body measurementsBasic human body measurements for technological design
Provides information and descriptions of anthropometric measurements as the basis for comparing population groups for ergonomists and others involved in the geometric design of places where people work. (SF-041)
AS 4024.19032006 Displays, controls, actuators and signals Ergonomic requirements for the design of displays and control actuatorsControl actuators
Provides guidance for the design, selection and location of manual control actuators so they are adapted to operator needs, are suitable for the control task in question and take into account the circumstances of their use. (SF-041)
AS 4024.13022006 Risk assessmentReduction of risks to health and safety from hazardous substances emitted by machineryPrinciples and specifications for machinery manufacturers
Provides principles for controlling risks to health resulting from the emission of hazardous substances from machinery. (SF-041)
AS 4024.17022006 Human body measurementsPrinciples for determining the dimensions required for openings for whole body access into machinery
Specifies the minimum opening dimensions required to gain whole body access to machinery. The dimensions are more applicable to non-mobile machinery as there may be additional specific requirements for mobile machinery. (SF-041)
AS 4024.19042006 Displays, controls, actuators and signals Indication, marking and actuation Requirements for visual, auditory and tactile signals
Specifies requirements for visual, auditory and tactile methods of indicating safety related information. It sets out a system of colours, signs, marking and other means of indicating hazards and meeting emergencies. In addition, it sets out ways of coding visual, auditory and tactile signals to enable safe use and monitoring of machinery. (SF-041)
AS 4024.17032006 Principles for determining the dimensions required for access openings
Specifies minimum dimensions for access openings in machinery. Values for additional space requirements are provided. Applies primarily to non-mobile machinery, as there may be additional specific requirements for mobile machinery. (SF-041)
AS 4024.15012006 Design of safety related parts of control systemsGeneral principles for design
Provides safety requirements and guidance on the principles to be used in the design of the safety related parts of machinery control systems. Categories are specified and the characteristics of the safety functions are described. (SF-041)
AS 4024.19052006 Displays, controls, actuators and signals Indication, marking and actuation Requirements for marking
Specifies the requirements for marking machinery. Provides general rules on marking for identification, safe use in respect of mechanical and electrical hazards and in preventing the hazards arising from incorrect connections. (SF-041)
AS 4024.18012006 Safety distances to prevent danger zones being reached by the upper limbs
Specifies the minimum safety distances from a barrier to the danger zone of a machine to prevent the danger zone being reached by the upper limbs of a person of age 3 years and above. The Standard is applicable only where safety can be assured by distance alone. The Standard will not provide sufficient protection against radiation or substances emitted from the machine. (SF-041)
AS 4024.19062006 Displays, controls, actuators and signals Indication, marking and actuation Requirements for the location and operation of actuators
Specifies the safety related requirements for actuators operated by hand or other parts of the human body at the man-machine interface. It applies to both single actuators, and groups of actuators. (SF-041)
AS 4024.19072006 Displays, controls, actuators and signals System of auditory and visual danger and information signals
Specifies a series of both visual and auditory danger and information signals which take into account the level of urgency for the given circumstances. The Standard applies to danger and information signals that have to be perceived and recognized from each other. The Standard does not apply to fields covered by specific Standards or conventions, e.g. fire alarms, public transport or navigation signals. (SF-041)
AS 4024.16012006 Design of controls, interlocks and guardingGuardsGeneral requirements for the design and construction of fixed and movable guards
Specifies requirements for the design and construction of fixed and movable guards intended to afford protection from mechanical hazards at machinery. (SF-041)
AS 4024.18022006 Safety distances and safety gapsSafety distances to prevent danger zones being reached by the lower limbs
Establishes values for safety distances to prevent access and to impede free access to danger zones of machinery, to prevent their being reached by the lower limbs of persons of 14 years and older. The distances apply where safety can be assured by distance alone and access by the upper limbs is not foreseeable by the risk assessment. (SF-041)
AS 4024.16022006 Interlocking devices associated with guardsPrinciples for design and selection
Specifies principles for the design and selection of interlocking devices associated with guards. The principles are independent of the energy sources used on the machine. (SF-041)
AS 4024.18032006 Safety distances and safety gaps Minimum gaps to prevent crushing of parts of the human body
Establishes values for the minimum gaps relative to parts of the human body to prevent risk of crushing between two surfaces, at least one of which can move. (SF-041)
AS 4024.26012008 Design of controls, interlocks and guardingTwo-hand control devicesFunctional aspects and design principles (ISO 13851:2002) 21pp
Specifies safety requirements and guidance on the design and selection of two-hand control devices. Means for preventing defeat are given in an Appendix. (SF-041)
150
AS 4030.21996 Determination of lead contentBack titration of EDTA after precipitation of lead sulfate (ISO 11441:1995) 15pp
Specifies a precipitation EDTA titrimetric method for the determination of lead content in lead sulfide concentrates. (MN-005)
AS/NZS 4033.6:1999 Protocol specifications (ISO/IEC 10021-6:1996, ISO/IEC 100216:1996/Cor 1:1998) 44pp
Specifies the message transfer system (MTS) access protocol P3 used between a remote user-agent and the MTS to provide an MTS abstract service. This Standard is identical with and has been reproduced from ISO/IEC 10021-6:1996 and Technical Corrigendum.1:1998. (IT-033)
AS 40311992 Non-reusable containers for the collection of sharp medical items used in health care areas 5pp
Amendment 1 5 August 1996 Specifies requirements for non-reusable containers intended for the safe collection and transport, in health care areas, of used sharp objects which may be infectious, and are disposed of with their contents. Appendices include methods of test for handle integrity, impact resistance and resistance to penetration. (HE-009)
AS/NZS 4033.7:1999 Interpersonal messaging system (ISO/IEC 10021-7:1997, ISO/IEC 100217:1997/Amd 1:1998, ISO/IEC 100217:1997/Cor 1:1998) 175pp
Defines interpersonal messaging, a form of messaging handling tailored for ordinary interpersonal business and private correspondence. This Standard is identical with and has been reproduced from ISO/IEC 100217:1997, Technical Corrigendum 1:1998 and Amendment 1:1998. (IT-033)
AS 4032 Water supplyValves for the control of heated water supply temperatures AS 4032.12005 Thermostatic mixing valvesMaterials design and performance requirements 52pp
Specifies requirements for the design, construction, testing performance and means of compliance for metallic-bodied thermostatic mixing valves. (WS-026)
6pp
Specifies dimensions of a range of flanged containers and related equipment used for preparing, cooking, serving, storing and transporting in the food-service and hospitality industries. (FT-019)
66pp
AS 40281992 Information technologyCommunication interface connectors used in local area networks (ISO/IEC TR 9578:1990) 42pp
Describes the physical layer connection device for local area networks. This device is sometimes referred to as the medium interface connector and is used between the terminal equipment and the trunk coupling unit for the trunk cable. This Standard is identical with and has been reproduced from ISO/IEC/TR 9578:1990. (IT-001)
Specifies the means by which messages are routed through the message handling system, supplementing the procedures given in AS/NZS 4033.4:1999. This Standard is identical with and has been reproduced from ISO/IEC 10021-10:1998. (IT-033)
AS/NZS 4034 Motor vehiclesCargo barriers for occupant protection AS/NZS 4034.1:2008 Cargo barriers 37pp
AS 4029 Stationary batteriesLead-acid AS 4029.11994 Vented type (IEC 60896-1 Ed. 1.0 (Bilingual 1987), IEC 60896-1 Amd.1 Ed. 1.0 (Bilingual 1988), IEC 60896-1 Amd.2 Ed. 1.0 (Bilingual 1990)) 16pp
Specifies requirements for the construction and performance of vented lead-acid batteries intended for use in stationary applications. It specifies minimum safety and performance requirements and provides test methods. It is based on and reproduced from IEC 8961:1987, including Amendment 1:1988 and Amendment 2:1990, with the addition of Australian Appendix ZZ. (EL-005)
Specifies a range of performance requirements including load ratings for cargo barriers, and their design, installation and usage in vehicles for the protection of occupants. (ME-084)
AS 4032.32004 Requirements for field testing, maintenance or replacment of thermostatic mixing valves, tempering valves and end of line temperature control devices 9pp
Specifies minimum requirements for field testing, maintenance, and the frequency with which this work shall be conducted, of thermostatic mixing valves, tempering valves and end-of-line temperature-actuated devices. (WS-026)
35pp
Specifies a range of performance requirements including load ratings for partial cargo barriers and their design, installation and usage in vehicles for the protection of occupants. (ME-084)
AS/NZS 4033 Information technologyText communication Message-oriented text interchange systems AS/NZS 4033.2:1999 Overall architecture (ISO/IEC 10021-2:1996, ISO/IEC 100212:1996/Cor 1:1998) 88pp
Defines the overall architecture of a message handling system (also known as X.400) including abstract models, various configurations and naming and addressing issues. This Standard is identical with and has been reproduced from ISO/IEC 10021-2:1996 and its Technical Corrigendum 1:1998. (IT-033)
AS/NZS 4029.2:2000 Valve-regulated type (IEC 60896-2 Ed. 1.0 (Bilingual 1995)) 20pp
Specifies safety requirements, methods of specifying performance and methods of test for valve-regulated, stationary, lead-acid batteries. It comprises IEC 60896-2 Stationary lead-acid batteriesGeneral requirements and methods of test, Part 2: Valveregulated types subject to variations for conditions in Australia and New Zealand. (EL-005)
AS/NZS 4033.4:1999 Message transfer systemAbstract service definition and procedures (ISO/IEC 10021-4:1997, ISO/IEC 100214:1997/Cor 1:1998) 158pp
Defines the abstract-service provided by the message transfer system and specifies the procedures to be performed by message transfer agents. This Standard is identical with and has been reproduced from ISO/IEC 10021-4:1997 and its Technical Corrigendum 1:1998. (IT-033)
AS 4030 Lead sulfide concentratesChemical analysis AS 4030.12002 Determination of lead contentEDTA titration method after acid digestion (ISO 13545:2000) 20pp
Sets out an acid digestion EDTA method for determining the lead content of lead sulfide concentrates. This Standard is identical with and has been reproduced from ISO 13545:2000. (MN-005)
AS/NZS 4033.5 Supplement 1:1999 Message storeAbstract service definitionAdditional correlation attribute and security error code (Supplement to AS 4033.51998) (ISO/IEC 10021-5:1996/Amd 1:1998) 7pp
Provides a number of extensions to the message store including an extended set of ASN.1 integer values for MS-security error codes and enhancements to the MSretrieval status attribute. This Supplement is identical
AS 4040 Methods of testing sheet roof and wall cladding AS 4040.01992 Introduction, list of methods and general requirements 2pp
Specifies a series of test methods which can be applied to sheet roof and wall cladding of various forms and base materials. (BD-014)
151
AS 4040.11992
AS 4040.11992 Resistance to concentrated loads AS 4046.12002 Determination of distortion AS 4049.42006 High performance pavement marking systems 35pp
Sets out requirements for performance assessment and specification of pavement marking systems. These systems may include paint, thermoplastic, pre-formed sheet, adhesive tapes, hot or cold applied, catalysed or other materials. (CH-003)
2pp
2pp
Specifies a series of test methods which can be applied to sheet roof and wall cladding of various forms and base materials. (BD-014)
Sets out the method for determining the distortion of roof tiles. (BD-008)
2pp
Sets out the method for determining the water absorption of roof tiles. (BD-008)
AS/NZS 4052:1992 Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz (CISPR 19 Ed. 1.0 (Bilingual 1983)) 8pp
Describes a method of measurement for small microwave ovens (largest dimension less than 1 m) and a separate method of measurement for large microwave ovens (largest dimension exceeding 1 m). Technically identical with IEC/CISPR 19:1983. (TE-003)
AS/NZS 4040.4:1996 Resistance to impact (sandbag) for sheet roof materials 3pp Available Superseded
(PL-022)
3pp
Amendment 1 31 January 2006 Sets out the method to determine the permeability of roof tiles. (BD-008)
2pp
Sets out a method to determine the resistance of roof tiles to freeze/thaw. (BD-008)
AS/NZS 4053:1997 Limits and methods of measurement of immunity characteristics of sound and television broadcast receivers and associated equipment (CISPR 20 Ed. 3.0 b (1996)) 80pp
Amendment 1 25 May 2000 Specifies limits for immunity characteristics to interfering signals applicable to radios, televisions and associated equipment. It is identical with and reproduced from IEC/CISPR 20:1996 and contains variations to test methods to incorporate local television transmission aspects. (TE-003)
337pp
Specifies minimum requirements for the materials, design, fabrication, testing, inspection, reports and precommissioning of piping subject to internal or external pressure. (ME-001)
47pp
84pp
Describes the application of configuration management (CM) disciplines to management of software engineering projects. This Standard is technically identical with and reproduced from IEEE Std 1042:1987. (IT-015)
7pp
Sets out performance requirements for saddle trees used in general purpose, stock, racing, exercise and western style horse riding saddles. (CS-069)
Amendment 1 28 July 2008 Specifies site wind speed classifications for determining design wind speeds and wind loads for housing that is within specified geometric limits. Wind speeds are specified for the serviceability and ultimate strength/stability limit states. (BD-099)
AS 4049 Paints and related materialsPavement marking materials AS 4049.12005 Solvent-borne paintFor use with surface applied glass beads 31pp
Specifies requirements for solvent-borne paints used for markings on pavement surfaces. The Standard applies to paints suitable for use with glass beads complying with AS/NZS2009, and intended for use by spray application, brush or a roller. (CH-003)
19pp
Amendment 1 5 December 1994 This Standard sets out data and procedures for determining design wind speeds and wind loads for housing only. Wind speeds are specified for the serviceability and ultimate strength/stability limit states, and for permissible stress design. Where houses do not comply with the limitations of this Standard, AS 1170.2 should be used. (BD-099)
AS/NZS 4056 Pliers and nippers AS/NZS 4056.1:1992 Nomenclature (ISO 5742:1982)
Sets out a classification and designation of prepared unshaped dense refractory materials. It does not apply to refractory materials that have been crushed or granulated. (MN-007)
AS 4045.22006 Insulating
3pp
AS 4049.22005 Thermoplastic pavement marking materialsFor use with surface applied glass beads 45pp
Specifies requirements for thermoplastic markings formulated with Type C glass beads complying with AS2009. (CH-003)
8pp
Specifies a classification and designation of prepared unshaped insulating refractory materials produced from a number of suitable materials. (MN-007)
Gives the nomenclature of pliers and nippers for general use in English, French and Russian. The equivalent terms in the German, Italian and Spanish languages are given in an Annex. This Standard is identical with and reproduced from ISO 5742:1982. (ME-010)
AS 4046 Methods of testing roof tiles AS 4046.02002 Introduction and list of methods 2pp
AS 4049.32005 Waterborne paintFor use with surface applied glass beads 34pp
Amendment 1 17 February 2006 Specifies requirements for waterborne paints as used for pavement markings on pavement surfaces. Paints are designed for use with Type B and D glass beads complying with AS/NZS2009. (CH-003)
2pp
Specifies a list of test methods for testing roof tiles used for domestic, commercial or light industrial applications. (BD-008)
Specifies the general technical requirements for pliers and nippers for general use. This Standard is identical with and reproduced from ISO 5743:1988. (ME-010)
152
6pp
Specifies methods of test of pliers and nippers for general use. This Standard is identical with and reproduced from ISO 5744:1988. (ME-010)
AS/NZS 4056.4:1992 Pliers for gripping and manipulating Dimensions and test values (ISO 5745:1988) 5pp
Specifies the principal dimensions and test values for pliers for gripping and manipulating for general use. This Standard is identical with and reproduced from ISO 5745:1988. (ME-010)
AS/NZS 4064:1997 Information technologyTelecommunications and information exchange between systems Private telecommunications networksDigital channel aggregation (ISO/IEC 13871:1995) 93pp
Defines a set of procedures used in the provision of higher bandwidth digital bi-directional channels by combining multiple switched or non-switched 56 kbit/s or 64 kbit/s digital bearer channels across public or private networks. This Standard is identical with and has been reproduced from ISO/IEC 13871:1995. (IT-016)
AS/NZS 4056.5:1992 Engineer's and lineman's pliers Dimensions and test values (ISO 5746:1988)
4pp
Specifies the principal dimensions and test values for engineer's and lineman's pliers for general use. This Standard is identical with and reproduced from ISO 5746:1988. (ME-010)
14pp
AS/NZS 4056.6:1992 Lever assisted side cutting pliers, end and diagonal cutting nippersDimensions and test values (ISO 5747:1984) 4pp
Specifies the principal dimensions and test values for lever assisted side cutting pliers, end and diagonal cutting nippers for general use. This Standard is identical with and reproduced from ISO 5747:1984. (ME-010)
Specifies minimum requirements for the materials, design, fabrication and erection of concrete utility services poles. It is intended to be used in conjunction with the forthcoming issue of AS 4676, Structural design requirements for utility services poles. (CE-019)
AS/NZS 4056.7:1992 End cutting nippersDimensions and test values (ISO 5748:1988) 4pp
Specifies the principal dimensions and test values for end cutting nippers for general use. This Standard is identical with and reproduced from ISO 5748:1988. (ME-010)
AS/NZS 4059:1996 Anaesthetic machinesNon-electricalFor use with humans (ISO 5358:1992) 25pp
Amendment 1 5 August 1996 Specifies the basic requirements for anaesthetic machines and associated components up to and including the fresh (common) gas outlet, for use with humans. Requirements are also included for anaesthetic vaporizers intended for incorporation into anaesthetic machines. Does not apply to intermittent-flow anaesthetic machines which deliver gas to the breathing system at varying rates in response to the patient's inspiratory efforts, and to dental nitrous oxideoxygen analgesia machines. This Standard is based on ISO 5358:1992. (HE-019)
13pp
Amendment 1 11 July 1994 Specifies optical, field of view, area of coverage and impact resistance requirements for eye protectors for use in racquet sports such as squash. Guidance is provided in a separate Appendix on the requirements for sports eye protectors with prescription lenses. (CS-084)
46pp
AS/NZS 4056.8:1992 Diagonal cutting nippersDimensions and test values (ISO 5749:1988) 4pp
Specifies the principal dimensions and test values for diagonal cutting nippers for general use. This Standard is identical with and reproduced from ISO 5749:1988. (ME-010)
Amendment 1 15 May 2006 Specifies performance requirements for the materials, design and construction of helmets intended for use by persons involved in fighting structural fires in city and urban areas. (SF-049)
24pp
19pp
AS/NZS 4056.9:1992 Multiple slip joint pliersDimensions and test values (ISO 8976:1988) 2pp
Specifies the principal dimensions and test values for multiple slip joint pliers for general use. This Standard is identical with and reproduced from ISO 8976:1988. (ME-010)
Amendment 1 17 May 1993 Specifies methods for calculating the working loads, resulting from overlaying material and superimposed dead and live loads, which act on buried vitrified clay pipelines. From these values, a design crushing load can be calculated for use in selecting an appropriate crushing strength class of pipes and fittings complying with AS 1741, Vitrified clay pipes and fittings with flexible jointsSewer quality. (WS-015)
Amendment 1 14 March 1994 Specifies dimensional and performance requirements for flat pallets, constructed of any types of material, for materials handling. Applies to 1165 mm x 1165 mm generalpurpose pallets, and to 1100 mm x 1100 mm pallets for use in ISO Series 1 freight containers. Relevant test methods are included. Examples of typical timber pallets, designed to enable compliance with the Standard, are provided in an Appendix. (PK-003)
AS/NZS 4056.10:1992 Construction worker's pincers Dimensions and test values (ISO 9242:1988)
Specifies the principal dimensions and test construction worker's pincers for general Standard is identical with and reproduced 9242:1988.
AS 4060 Supplement 11992 Loads on buried vitrified clay pipes Commentary (Supplement to AS 40601992) 19pp
Amendment 1 17 May 1993 Gives background to AS 4060 and helpful information for design engineers or other appropriately qualified persons and those writing specifications for the installation of vitrified clay pipelines. Emphasis is placed on the need, particularly with non-granular material, for achieving in the field support conditions consistent with the assumptions of which the equations in the Standard are based. An appendix gives worked examples which illustrate the load calculations and how the calculated values are used to select an appropriate crushing strength class of pipes and fittings for a particular pipeline. (WS-015)
4pp
Specifies materials, design and performance requirements for seats which are designed to be attached to or placed on the sides of a bathtub, and which are used to support people for bathing purposes. Does not cover seats which are designed to be placed within a bathtub. (ME-067)
3pp
values for use. This from ISO (ME-010)
AS 40701992 Recommended practices for protection of low-voltage electrical installations and equipment in MEN systems from transient overvoltages 3pp
Recommends a simple system for the protection of electrical installations and connected equipment from transient voltages exceeding 2500 V due to lightning discharges and switching. (EL-007)
AS/NZS 4056.11:1992 Carpenter's pincersDimensions and test values (ISO 9243:1988) 3pp
Specifies the principal dimensions and test values for carpenter's pincers for general use. This Standard is identical with and reproduced from ISO 9243:1988. (ME-010)
AS 40611992 Fluid power systems and components Vocabulary (ISO 5598:1985) 44pp
Defines terms used in relation to fluid power systems and components. Identical with and reproduced from ISO 5598:1985. (ME-035)
7pp
AS/NZS 4056.12:1992 Slip joint pliersDimensions and test values (ISO 9343:1988) 2pp
Specifies the principal dimensions and test values for slip joint pliers for general use. This Standard is identical with and reproduced from ISO 9343:1988. (ME-010)
Prescribes the format and content of software project management plans. This Standard is identical with and reproduced from ANSI/IEEE 1058.11987. (IT-015)
AS 40621992 Information technology3.81 mm wide magnetic tape cartridge for information interchangeHelical scan recordingDDS format (ISO/IEC 10777:1991) 100pp
Specifies the physical and magnetic characteristics of these cartridges. This Standard is identical with and reproduced from ISO/IEC 10777:1991. (IT-001)
AS 4072 Components for the protection of openings in fire-resistant separating elements AS 4072.12005 Service penetrations and control joints 25pp
Amendment 1 22 March 2006 Specifies requirements for the testing, interpretation of test results, and installation of penetration sealing systems and control joints sealing systems in fire-resistant
153
AS 4072.11992
elements of construction. The Standard is based on the testing of standard configurations and provides minimum requirements for these fire-stopping systems. It is intended to complement the fire-protection requirements of the Building Code of Australia and is to be read in conjunction with the testing regimes set out in AS 1530.4. (FP-019)
6pp
Specifies definitions of terms for use in conjunction with recycled paper. Terms used when describing sources of recycled fibre, manufacturing processes and finished paper characteristics are included. (EV-014)
AS/NZS 4093:1994 Information technologyTelecommunications and information exchange between systems Protocol identification in the network layer (ISO/IEC TR 9577:1993) 12pp
Provides a description of a means to permit an identification of a protocol in the network layer and provides a record of the structure and allowable ranges of protocol identifiers which can be assigned by JTC 1 and other authorities. This Standard is identical with, and has been reproduced from, ISO/IEC TR 9577:1993. (IT-001)
38pp
Specifies the minimum requirements for the design (in permissible stress method), fabrication and erection tolerances, test methods, operation and maintenance of steel storage racking. It applies to adjustable static pallet racking made of cold-formed or hot-rolled steel structural members installed within a building and also where it forms part of the building frame. It does not cover drive-in and drivethrough racking, cantilever racking, mobile racking or racking made of materials other than steel. A Commentary to the Standard, which is published separately, provides background material to the requirements of the Standard. (BD-062)
AS/NZS 4094:1993 Information technologyOpen Systems InterconnectionLocal area networksMedium access control service definition (ISO/IEC 10039:1991) 13pp
Defines the medium access control service found in local area network architecture in abstract terms, of the primitive actions and events of the service, the parameters associated with each primitive action and event, and the form they take, and the interrelationship between, and the valid sequences of these actions and events. The Standard is identical with, and has been reproduced from, ISO/IEC 10039:1991. (IT-001)
AS 4076 Conveyor beltsDetermination of strength of mechanical fastenings AS 4076.11992 Static test method (ISO 1120:1984)
AS/NZS 4095:1993 Information technologyTelecommunications and information exchange between systems End system routing information exchange protocol for use in conjunction with AS/NZS 3604 (ISO/IEC 10030:1990) 16pp
Amendment 1 5 May 1995 Defines a protocol for the exchange of routing information between an end system and a subnetwork address resolution entity. It is applicable to end systems which operate according to the main body of AS/NZS 3604 to provide and support the OSI connection-mode network service and subnetwork address resolution entities. This Standard is identical with, and has been reproduced from, ISO/IEC 10030:1990. (IT-001)
3pp
Specifies a static test method for measuring the strength of a conveyor belt mechanical fastening. The Standard does not cover vulcanized joints. This Standard is identical with and reproduced from ISO 1120:1984. (RU-002)
AS 4086 Secondary batteries for use with stand-alone power systems AS 4086.11993 General requirements 16pp
AS 40781992 Fire protectionFire extinguishing media Carbon dioxide (ISO 5923:1989) 12pp
Specifies requirements for carbon dioxide for use as fire extinguishing media. It is identical with and has been reproduced from ISO 5923:1989. (FP-003)
Specifies requirements for secondary batteries for use with power systems not connected to the distribution system of an electricity supply authority. Covers both performance and safety requirements and provides test methods. (EL-005)
36pp
AS 40791992 Information technology130 mm rewritable optical disk cartridge for information interchange (ISO/IEC 10089:1991) 96pp
Specifies the characteristics of 130 mm optical disk cartridges (ODC) of the type providing for information to be written, read and erased many times using the magnetooptical effect. This Standard is identical with and reproduced from ISO/IEC 10089:1991. (IT-001)
Specifies requirements for the installation and maintenance of secondary batteries installed in stand-alone power systems, i.e. power systems that are not connected to the power distribution system of an electricity supply authority. It applies to the installation of all types of batteries. (EL-005)
AS/NZS 4095 Supplement 1:1995 Information technologyTelecommunications and information exchange between systems End system routing information exchange protocol for use in conjunction with AS 3604 Protocol implementation conformance statement (Supplement to AS/NZS 4095:1993) (ISO/IEC 10030:1990/Amd.2:1992) 8pp
Supplies the protocol implementation conformance statement proforma in compliance with the relevant requirements. This Standard is identical with and has been reproduced from ISO/IEC 10030:1990/Amd.2:1992. (IT-001)
AS/NZS 4097:1993 Information technologySGML support facilitiesRegistration procedures for public text owner identifiers (ISO/IEC 9070:1991) 5pp
Applies the assignment of unique owner prefixes to owners of public text conforming to AS 3514. It describes the procedures whereby such assignments are made, and the method of constructing registered owner identifiers from them. This Standard is identical with, and has been reproduced from, ISO/IEC 9070:1991. (IT-001)
AS 40801995 User terminals for accessing the mobilesat satellite communications system 29pp
Details definitions, minimum physical layer performance requirements, environment and testing requirements of mobile terminals for accessing the mobilesatTM satellite communications system owned and operated by OPTUS Communications. The specifications cover signalling and telephony requirements to ensure access to the system, attainment of intended service quality, interworking with the network management station, base stations and gateways, and also to ensure that the terminals will not in any circumstance endanger system integrity. Mechanical specifications for terminals, the numbering scheme, or possible user interfaces for enhancement facilities are not covered. This Standard is intended for use by terminal equipment designers, manufacturers, suppliers and maintenance personnel, to ensure correct operation of mobile terminals and their compatibility with the mobilesatTM communications system. (RC-006)
AS/NZS 4088 Specification for burning behaviour of upholstered furniture AS/NZS 4088.1:1996 Upholstery materials for domestic furnitureSmouldering ignitability 6pp
Specifies testing and performance requirements for upholstery materials for use in domestic furniture. (CS-086)
AS/NZS 4099:1994 Information technologyTelecommunications and information exchange between systems Provision of the OSI connection-mode network service by packet mode terminal equipment connected to an integrated services digital network (ISO/IEC 9574:1992) 19pp
Specifies the method of providing a connection-mode network service by packet mode terminal equipment connected to an ISDN in accordance with procedures described in ITU-T X.31. This Standard is identical with, and has been reproduced from, ISO/IEC 9574:1992. (IT-001)
AS/NZS 4081:2001 The storage and handling of liquid and liquefied polyfunctional isocyanates 65pp
Sets out requirements and recommendations for the safe storage and handling of polyfunctional isocyanates (PFIs). Advice is given on installation design, operations, personnel safety and waste disposal. Guidance on fire protection and emergency procedures is also provided. (CH-009)
AS 40901993 Whole bloodDetermination of lead content Graphite furnace atomic absorption spectrometric method 9pp
Sets out the method for the determination of lead in venous and capillary blood using graphite furnace atomic spectrometry. The method is suitable for blood with lead content in the range of 0.25 mol/L to 6.0 mol/L. (CH-036)
191pp
8pp
This Standard sets out minimum requirements for the design, fabrication, erection, and modification of steelwork in structures in accordance with the limit states design method. This Standard also incorporates Amendment No. 11992, No. 21993, No. 31995 and draft Amendment No. 4 issued for public comment as DR 97347. (BD-001)
Specifies guarding and other safety requirements for exercise cycles intended for domestic use. (CS-087)
154
AS/NZS 4101:1993 Information technologyInformation resource dictionary system framework (ISO/IEC 10027:1990) 15pp
Describes the framework for a number of international standards that specify a specialised information system, called an information resource dictionary system (IRDS). An IRDS is used to control and document an enterprise's information resources. The Standard is identical with, and has been reproduced from, ISO/IEC 10027:1990. (IT-029)
AS/NZS 4104:1993 Information technologyTelecommunications and information exchange between systems Network/transport protocol interworking specification (ISO/IEC TR 10172:1991) 25pp
Specifies the circumstances in which interworking functional units may be used to provide the OSI connectionmode transport service end-to-end between two end systems, where one of the end systems is accessed using the connection-mode transport protocol as defined in ISO 8073/Add.2 in combination with the protocol defined in ISO 8473 and the other end system is accessed using the connection-mode transport protocol as defined in AS 2912 in combination with the procedures defined in AS 3621. This Standard is identical with, and has been reproduced from, ISO/IEC TR 10172:1991. (IT-001)
AS/NZS 4107.3:1993 Provision and support of the connectionless-mode network service (ISO/IEC 8880-3:1990) 5pp
Describes the provision and support of the connectionless-mode network service defined in AS 2994. This Standard is identical with, and has been reproduced from, ISO/IEC 8880-3:1990. (IT-001)
AS/NZS 4102:1993 Information technologyIntegrated services digital network primary access connector at reference points S and T (ISO/IEC 10173:1991) 12pp
Specifies the 8-contact (plug and jack) and the assignments of its contact numbers for use in the physical interfaces of integrated services digital network (ISDN) primary rate access services conforming to CCITT Recommendation I.431. This Standard is identical with, and has been reproduced from, ISO/IEC 10173:1991. (IT-001)
AS/NZS 4105:1993 Information technologyOpen Systems InterconnectionProtocol specification for the commitment, concurrency and recovery service element (ISO/IEC 9805:1990, ISO/IEC 9805:1990/Cor.1:1991) 33pp
Amendment 1 5 May 1996 Specifies the protocol of the commitment, concurrency and recovery (CCR) service when invoked by other specifications. It is used whenever the CCR service does not encompass any communication activity which makes direct or indirect use of the session activity management services. This Standard is identical with, and has been reproduced from, ISO/IEC 9805:1990 and includes Technical Corrigendum 1:1991. (IT-001)
AS/NZS 4110:1993 Information technologySGML and text-entry systemsGuidelines for SGML syntaxdirected editing systems (ISO/IEC TR 10037:1991) 11pp
Describes a set of functions which an SGML syntaxdirected editing system may have in order to help users manipulate documents marked up according to the rules of SGML. This Standard is identical with and has been reproduced from ISO/IEC TR 10037:1991. (IT-001)
AS/NZS 4103 Information technologyOpen Systems InterconnectionConformance testing methodology and framework AS/NZS 4103.1:1993 General concepts (ISO/IEC 9646-1:1991)
AS 41111993 Starters for fluorescent lampsPerformance requirements (IEC 60155 Ed. 3.0 (1983)) 9pp
Amendment 1 15 August 1994 Specifies performance requirements for interchangeable glow-starters used with preheat type fluorescent lamps. (EL-041)
31pp
Specifies a general methodology for testing the conformance of products to international standards or CCITT Recommendations that specify OSI protocols which the products are claimed to implement. The methodology also applies to testing conformance to an international standard or CCITT Recommendations that specifies a transfer syntax to the extent that can be determined by testing it in combination with a specific OSI protocol. The Standard is identical with, and has been reproduced from, ISO/IEC 9646-1:1991. (IT-001)
AS/NZS 4105 Supplement 1:1995 Information technologyOpen Systems InterconnectionProtocol specification for the commitment, concurrency and recovery service elementSession mapping changes (Supplement to AS/NZS 4105:1993) (ISO/IEC 9805:1990/Amd.2:1992) 20pp
Specifies two protocol versions, one which makes use of the session data separation functional unit and one that does not. This Standard is identical with and has been reproduced from ISO/IEC 9805:1990/Amd.2:1992. (IT-001)
AS 4113 Traffic signal lamps AS 4113.11993 Lamps for 240 V a.c. operation 17pp
Specifies requirements for tungsten filament lamps designed for operation on a 240 V, 50 Hz a.c. electric supply for use in road traffic signal systems. Covers the construction, performance and testing of such lamps. Safety requirements are dealt with by reference to IEC 432. (LG-006)
28pp
Specifies requirements and gives guidance for the production of system-independent conformance test suites for one OSI international standards or CCITT Recommendations. In particular, it is applicable to the production of all conformance testing standards for OSI and ISDN two-party protocols, including all drafts versions of such conformance testing standards. This Standard is identical with, and has been reproduced from, ISO/IEC 9646-2:1991. (IT-001)
AS/NZS 4106:1993 Information technologyOpen Systems InterconnectionService definition for the commitment, concurrency and recovery service element (ISO/IEC 9804:1990, ISO/IEC 9804:1990/Cor.1:1991) 42pp
Intended for reference by other specifications when the functionality of commitment, concurrency and recovery is required. This Standard can be referenced whenever the processing of two or more application-entity invocations in a distributed application needs to be organized into an atomic action; it also defines services that are used during such processing. This Standard is identical with, and has been reproduced from, ISO/IEC 9804:1990 and includes Technical Corrigendum 1:1991. (IT-001)
AS/NZS 4114 Spray painting booths, designated spray painting areas and paint mixing rooms AS/NZS 4114.1:2003 Design, construction and testing 30pp
AS/NZS 4103.3:1994 The tree and tabular combined notation (ISO/IEC 9646-3:1992) 177pp
Defines a test notation for OSI conformance test suites, which is independent of test methods, layers and protocols, and which reflects the abstract testing methodology defined in AS/NZS 4103.1 and AS/NZS 4103.2. This Standard is identical with, and has been reproduced from, ISO/IEC 9646-3:1992. (IT-001)
AS/NZS 4107 Information technologyTelecommunications and information exchange between systems Protocol combinations to provide and support the OSI network service AS/NZS 4107.1:1993 General principles (ISO/IEC 8880-1:1990)
Specifies requirements for the design, construction and testing of spray painting booths, designated spray painting areas and paint mixing rooms in which there may be an explosion hazard due to the presence of flammable volatiles from the paints and finishes used. It is intended to be read in conjunction with AS 2381.1. (EL-014)
16pp
10pp
4pp
Specifies requirements and gives guidance concerning the realization of a means of testing implementations under test in conformance with a reference OSI standardized abstract test suite specified in compliance with ISO/IEC 9646-2 (AS/NZS 4103.2). This Standard is identical with, and has been reproduced from, ISO/IEC 9646-4:1991. (IT-001)
AS/NZS 4103.5:1993 Requirements on test laboratories and clients for the conformance assessment process (ISO/IEC 9646-5:1991) 25pp
Specifies requirements on both the test laboratory and the client, for the conduct of the conformance assessment process. The requirements are those necessary to achieve comparability of results of tests on similar implementations performed by different test laboratories. This Standard is identical with, and has been reproduced from, ISO/IEC 9646-5:1991. (IT-001)
Refers to those international standards which define the architectural principles governing the provision of the network service; defines terms which may be used in specifying the environments in which protocol combinations operate; specifies principles and a framework for describing the support of the OSI network service and defines the conformance principles to be followed in the other parts of AS/NZS 4107 which specify the requirements for equipment claiming conformance to AS/NZS 4107. This Standard is identical with, and has been reproduced from, ISO/IEC 8880-1:1990. (IT-001)
Specifies requirements for the design, construction and testing of spray painting booths in which there may be an explosion hazard due to the presence of flammable volatiles from the paints and finishes used. It is intended to be read in conjunction with AS 2381.1. (EL-014)
11pp
AS/NZS 4107.2:1994 Provision and support of the connectionmode network service (ISO/IEC 8880-2:1992) 7pp
Provides a description of the connection-mode network service, including the field of application. This Standard is identical with, and has been reproduced from, ISO/IEC 8880-2:1992. (IT-001)
Specifies requirements for the installation and maintenance of spray painting booths, designated spray painting areas and paint mixing rooms in which there may be an explosion hazard due to the presence of flammable volatiles from the paints and finishes used. It is intended to be read in conjunction with Part 1 and AS 2381.1. (EL-014)
9pp
Specifies the requirements for hand torque tools for general use. The tolerances on the torque values indicated by a
155
AS 41161993
measuring hand torque tool and the torque value set on a setting hand torque tool are given and a calibration life test is prescribed. (ME-010)
tively coupled plasma-atomic emission spectrometry (ICP-AES) (fire assay methods) 13pp
Sets out spectrometric procedures for the determination of platinum and palladium in gold and gold bearing alloys by initial fire assay followed by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma-atomic emission spectrometry (ICP-AES). The methods are applicable to gold and gold alloys containing less than 10% palladium and less than 10% platinum. (CH-010)
AS 41161993 Information processing systemsData interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side ISO Type 303 (ISO/IEC 10994:1992) 45pp
Specifies the characteristics of 90 mm flexible disk cartridges recorded at 31 831 ftprad using modified frequency modulation recording, on 80 tracks on each side. This Standard is identical with, and has been reproduced from, ISO/IEC 10994:1992. (IT-001)
6pp
Provides the most essential safety and health requirements for mobile waste containers. (PL-047)
7pp
Sets out the ethics and obligations of the principal and tenderers in the tendering process in the construction industry. It applies to the selection of contractors and subcontractors. Published in conjunction with the Construction Industry Development Agency. (MB-010)
AS 41211994 Code of ethics and procedures for the selection of consultants 6pp
Sets out the ethics and obligations of the principal and consultants in the selection and appointment of consultants and subconsultants for the procurement of professional services in the construction industry. Published in conjunction with the Construction Industry Development Agency. (MB-010)
AS ISO 41242007 Liquid hydrocarbonsDynamic measurementStatistical control of volumetric metering systems (ISO 4124:1994) 85pp
Adopts ISO 4124:1994 which provides guidance for establishing and monitoring the performance of dynamic volumetric metering systems, using statistical control procedures for both central and on-line proving. These procedures may be applied to measurements made by any type of volumetric or mass metering systems. The procedures to be followed for collecting data, on which the control limits are based, are described. (ME-049)
AS 4118 Fire sprinkler systems AS 4118.1.11996 ComponentsSprinklers and sprayers (ISO 6182-1:1993) 44pp
Specifies the performance and testing of metallic element and frangible glass bulb sprinklers and sprayers. (FP-004)
AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications 52pp
Specifies requirements for fittings to be used with polyethylene pipe manufactured in accordance with AS/NZS 4130 or AS 2698.2 or POP-009. This Standard is applicable to fittings manufactured for the conveyance of water, fuel gas, and other fluids including compressed air. (PL-006)
14pp
Specifies the requirements for the construction and performance of alarm valves (wet), for use in fire sprinkler systems. (FP-004)
AS 41222000 (Reusable PDF) General conditions of contract for engagement of consultants 17pp
Proposes general conditions for the engagement of engineers, architects and similar consultants. The Standard sets out the general obligations governing the relationship between these consultants and their clients. It is not suitable for a design and construct project procurement method.
5pp
Specifies requirements for the construction and performance for water motor alarms for fire sprinkler systems. (FP-004)
AS 4123 Mobile waste containers AS 4123.12008 Containers with two wheels and a capacity up to 400 L for lifting devices Dimensions and design 14pp
Specifies dimensions and design requirements for mobile waste containers with two wheels, with a nominal capacity up to 400 L. It is not to be considered a design specification or a instruction manual. (PL-047)
12pp
Specifies the requirements for establishing compliance with limits of design, performance, security and durability for sprinkler and hydrant valve monitors. (FP-004)
AS/NZS 4131:2003 Polyethylene (PE) compounds for pressure pipes and fittings 17pp
Amendment 1 27 May 2005 Specifies requirement for polyethylene compounds suitable for manufacturing polyethylene pipe and fittings for pressure applications. (PL-006)
AS 4123.22008 Containers with four wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or lifting devices Dimensions and design 14pp
Specifies dimensions and design requirements for mobile waste containers with four wheels, with a nominal capacity up to 1200 L. It is not to be considered a design specification or a instruction manual (PL-047)
AS 4132 Boat and ship design and construction AS 4132.11993 Design loadings 10pp
18pp
Specifies the requirements for the construction of dry alarm valves for use in fire sprinkler systems. (FP-004)
AS 4123.32008 Containers with four wheels with a capacity from 770 L to 1300 L with dome lid(s), for trunnion and/or lifting devices Dimensions and design 16pp
Specifies dimensions and design requirements for mobile waste containers with four wheels, with a nominal capacity up to 1300 L. It is not to be considered a design specification or a instruction manual. (PL-047)
Specifies the loads to be used in the determination of scantlings for vessels not exceeding 35 m in length. Special requirements for multi-hull vessels are included but those for hydrofoils, small-waterplane-area twin-hull vessels, or other vessels of unusual configurations are not included. It does not cover loadings for special operating procedures and conditions, e.g. docking and tug operations. (ME-059)
38pp
Specifies the structural requirements for aluminium alloy vessels not more than 35 m in length. Special requirements for multi-hull vessels are included but those for hydrofoils, small-waterplane-area twin-hull vessels, or other vessels of unusual configurations are excluded. (ME-059)
AS 4118.2.11995 PipingGeneral
27pp
Amendment 1 22 June 2005 Specifies the requirements for piping for fire sprinkler systems. (FP-004)
AS 4123.42008 Containers with four wheels with a capacity from 750 L to 1700 L with flat lid(s), for wide trunnion or BG and/or wide comb lifting devicesDimensions and design 18pp
Specifies dimensions and design requirements for mobile waste containers with four wheels, with a nominal capacity from 750 L up to 1700 L. It is not to be considered a design specification or a instruction manual. (PL-047)
AS 41192007 Determination of platinum and palladium in gold and gold bearing alloysFlame atomic absorption spectrometry (FAAS) or induc-
156
AS 4133.4.21993 Rock strength testsDetermination of uniaxial compressive strength 3pp Available Superseded
Sets out the method for determining the uniaxial compressive strength of a rock sample in the form of specimens of regular geometry. (CE-009)
curing, including autoclaving, for the conveyance of gravity water supply, and stormwater, waste water and sewage drainage. (WS-008)
AS 4133.4.2.12007 Rock strength testsDetermination of uniaxial compressive strength of 50 MPa and greater 3pp
Sets out the method for determining the uniaxial compressive strength of a rock sample in the form of specimens of regular geometry. (CE-009)
AS 4133.1.1.12005 Rock moisture content tests Determination of the moisture content of rockOven drying method (standard method) 4pp
Defines a laboratory method for determining the moisture content of rock, as a percentage of its dry mass, using a standard oven. (CE-009)
AS 4141 Customer/utility information exchange AS 4141.11995 System architecture and functionality 26pp
Specifies the architecture and levels of functionality for an electronic system of 2-way information exchange between utilities (e.g. electricity, gas, water) and their customers for activities such as remote reading, customer display of consumption and related matters, load control, relaying of alarms, and other customer services. (TE-018)
AS 4133.4.31993 Rock strength testsDetermination of deformability of rock materials in uniaxial compression 7pp
Sets out the method for determining the stress-strain curves and Young modulus, and Poisson ratio in uniaxial compression of a rock sample in the form of specimens of regular geometry. (CE-009)
AS 4133.2.1.12005 Rock porosity and density tests Determination of rock porosity and dry densitySaturation and calliper techniques 4pp
Defines the method for determining the porosity and dry density of rock samples in the form of specimens of regular geometry. (CE-009)
3pp
Sets out the method for the collection of rock samples using rock core drilling. (CE-009)
AS 4133.2.1.22005 Rock porosity and density tests Determination of rock porosity and dry densitySaturation and buoyancy techniques 5pp
Defines the method for determining the porosity and dry density of rock samples in the form of lumps or aggregate of irregular geometry. (CE-009)
AS/NZS 4134:1995 Information technologyTelecommunications and information exchange between systems Numbering and sub-addressing in private integrated services networks (ISO/IEC 11571:1994) 17pp
Defines the requirements for the handling of network addresses for the identification of entities which use or provide telecommunications services offered by private integrated services networks. It is one of a series of Standards applicable to private integrated services networking. It is identical with and reproduced from ISO/IEC 11571:1994. (IT-016)
AS 4141.21995 Applications and performance (IEC/TR 61361 Ed. 1.0 (Bilingual 1995)) 26pp
Gives examples of performance requirements for an electronic 2-way information exchange between utilities and their customers as guidance for utilities to specify a system and for manufacturers to develop products. (TE-018)
10pp
AS 4133.3.12005 Rock swelling and slake durability tests Determination of the swelling strain developed in an unconfined rock specimen 3pp
Defines the method for determining the swelling strain developed when an unconfined undisturbed rock specimen is immersed in water. (CE-009)
Specifies requirements and recommendations for interfaces at the customer premises between elements in an electronic system of 2-way information exchange between utilities and their customers. (TE-018)
AS 4133.3.22005 Rock swelling and slake durability tests Determination of the swelling strain for a radially confined specimen with axial surcharge 4pp
Defines the method for determining the swelling strain developed against a constant axial pressure or surcharge, when a radially confined, undisturbed rock specimen is immersed in water. (CE-009)
AS/NZS 4135:1995 Information technologyTelecommunications and information exchange between systems Private integrated services networkCircuitmode 64 kbit/s bearer servicesService description, functional capabilities and information flows (ISO/IEC 11574:1994) 63pp
Amendment 1 5 March 1999 Specifies the service description and control aspects for three basic circuit-mode bearer services which may be supported by a private integrated services network. It is one of a series of Standards applicable to private integrated services networking. It is identical with and reproduced from ISO/IEC 11574:1994. (IT-016)
Provides guidance on the selection, care, inspection and maintenance of fibre ropes. Recommendations for the safe usage of ropes are also included. (TX-004)
AS 4133.3.32005 Rock swelling and slake durability tests Determination of the swelling pressure index under conditions of zero volume change 4pp
Defines the method for determining the pressure necessary to constrain an undisturbed rock specimen at constant volume when it is immersed in water. (CE-009)
AS/NZS 4136 Information technologyTelecommunications and information exchange between systems Private integrated services network AS/NZS 4136.1:1995 Reference configuration for PISN exchanges (PINX) (ISO/IEC 11579-1:1994) 9pp
Specifies a reference configuration for private integrated services network exchanges for their interconnection to form integrated services networks. It is one of a series of Standards applicable to private integrated services networking. It is identical with and reproduced from ISO/IEC 11579-1:1994. (IT-016)
AS 4142.31993 Man-made fibre rope for static life rescue lines 7pp
Amendment 1 5 July 1996 Specifies design, performance and marking requirements for man-made fibre ropes intended for use as static life rescue lines by rescue and emergency services. (TX-004)
AS 4133.3.42005 Rock swelling and slake durability tests Determination of the slake durability index of rock samples 5pp
Defines the method for determining the resistance offered by a rock sample to weakening and disintegration when subjected to two standard cycles of drying and wetting and physical abrasion in a controlled chemical environment. (CE-009)
AS 4143 Methods of test for fibre ropes AS 4143.11993 Dimensions, linear density, breaking force and elongation 8pp
Specifies apparatus, procedures and calculations for measuring the diameter, length of lay, linear density, breaking force and elongation of fibre ropes. Includes procedures for larger diameter ropes. (TX-004)
AS/NZS 4138:1995 Information technologyTelecommunications and information exchange between systems Synchronization methods and technical requirements for private integrated services networks (ISO/IEC 11573:1994) 34pp
Specifies requirements necessary for the synchronization of private integrated services networks. It is one of a series of Standards applicable to private integrated services networking. It is identical with and reproduced from ISO/IEC 11573:1994. (IT-016)
3pp
Specifies methods for determining the knotability and knot breaking force of a fibre rope. (TX-004)
5pp
AS 4133.4.11993 Rock strength testsDetermination of point load strength index 5pp Available Superseded
Amendment 1 14 February 1994 (CE-009)
Specifies a method for measuring sheath slippage in multiple-layer fibre ropes, i.e. ropes with a sheath and core. (TX-004)
5pp
Specifies methods for subjecting a fibre rope to the forces associated with arresting the fall of a dropped
157
AS 4143.51993
mass and for determining the impact strength index for multiple-layer fibre ropes, i.e. ropes with a sheath and core. (TX-004)
AS/NZS 4149:1994 Information technologyTelecommunications and information exchange between systems Intermediate system to intermediate system intra-domain routing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO/IEC 10589:1992, ISO/IEC 10589:1992/Cor 1:1993) 150pp
Specifies procedures for the transmission of and the encoding of the protocol data units used for configuration and routing information between network entities residing in intermediate systems within a single routing domain as well as procedures for the correct interpretation of protocol control information and the functional requirements for implementations claiming conformance. This Standard is identical with, and has been reproduced from, ISO/IEC 10589:1992, including Technical Corrigendum 1:1993. (IT-001)
Establishes a model that relates the service and generic definitions provided by the state management function to user requirements. This Standard is identical with, and has been reproduced from, ISO/IEC 10164-2:1993. (IT-001)
3pp
Specifies a method for measuring the resistance to local severe abrasion of a fibre rope. Suitable for multiple-layer fibre ropes (i.e. ropes with a sheath and core) used in extreme or emergency situations such as life rescue. (TX-004)
18pp
AS 4145 Locksets and hardware for doors and windows AS 4145.12008 Glossary of terms and rating system 38pp
Sets out terms used in the Australian lock industry and marketplace to aid in the use of other parts of the series on locksets and to help standardize the terminology. Also sets out testing and rating requirements intended as a product selection system enabling the consumer to choose the appropriate locksets suitable for the required application. (CS-082)
AS/NZS 4150 Information technologyOpen Systems InterconnectionConformance test suite for the ACSE protocol AS/NZS 4150.1:1993 Test suite structure and test purposes (ISO/IEC 10169-1:1991) 14pp
Applies to conformance test suites for testing association control service element protocol implementations which operate over a connection oriented presentation service and which claim conformance to AS 3684. This Standard is identical with, and has been reproduced from, ISO/IEC 10169-1:1991. (IT-001)
Establishes the model and defines the services provided for the alarm reporting function. This Standard is identical with, and has been reproduced from, ISO/IEC 10164-4:1992. (IT-001)
18pp
Establishes the model and defines the services provided for the event report management function. This Standard is identical with, and has been reproduced from, ISO/IEC 10164-5:1993. (IT-001)
17pp
AS/NZS 4151 Information technologyOpen Systems InterconnectionStructure of management information AS/NZS 4151.1:1994 Management information model (ISO/IEC 10165-1:1993)
Establishes the model and defines the services provided for the log control function. This Standard is identical with, and has been reproduced from, ISO/IEC 10164-6:1993. (IT-001)
13pp
28pp
Provides a definition of the information model of managed objects and their attibutes that will correspond to the information aspects of the systems management model. This Standard is identical with, and has been reproduced from, ISO/IEC 10165-1:1993. (IT-001)
AS 4145.42002 Padlocks
37pp
Establishes user requirements for the service definition needed to support the security alarm reporting function, defines the service and specifies the protocol provided by such a function. The relationship between the service and managements notification is defined together with the relationships with other systems management functions. The conformance requirements are specified. This Standard is identical with, and has been reproduced from, ISO/IEC 101647:1992. (IT-001)
Specifies the general design criteria, performance requirements and procedures for testing padlocks for their resistance to physical attacks and corrosion under condition of low to high frequency usage. (CS-082)
26pp
Establishes the model and defines the services provided for the security audit trail function. This Standard is identical with, and has been reproduced from, ISO/IEC 10164-8:1993. (IT-001)
59pp
Specifies general laundry practice requirements and recommendations for commercial, industrial, hospital, institutional, on-premise and coin-operated laundries as well as minimum performance requirements which should be attained in order to provide an acceptable level of service. (TX-016)
AS/NZS 4151.4:1993 Guidelines for the definition of managed objects (ISO/IEC 10165-4:1992) 47pp
Specifies the relationship between the relevant OSI management Recommendations and International Standards and the definition of managed object classes, and how these Recommendations and International Standards should be used by managed object class definitions, and the appropriate methods to be adopted for the definition of managed object classes and their attributes, notifications, actions and behaviour. This Standard is identical with, and has been reproduced from, ISO/IEC 10165-4:1992. (IT-001)
AS/NZS 4153 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authorities AS/NZS 4153.1:1994 General procedures (ISO/IEC 9834-1:1993)
AS/NZS 4147:1993 Information technologyTelecommunications and information exchange between systems The structure and coding of logical link control addresses in local area networks (ISO/IEC TR 10178:1992) 12pp
Provides a description of the ISO 8802-2 (AS/NZS 4802.2) addressing conventions, the consideration for the manner in which new logical link control address uses are assigned an entry and a record, in the form of a table, of assigned uses of address values. This Standard is identical with, and has been reproduced from, ISO/IEC TR 10178:1992. (IT-001)
14pp
Specifies procedures which are generally applicable to registration of objects within the Open Systems Interconnection environment. This Standard is identical with, and has been reproduced from, ISO/IEC 98341:1993. (IT-001)
AS/NZS 4152 Information technologyOpen Systems InterconnectionSystems management AS/NZS 4152.1:1994 Object management function (ISO/IEC 10164-1:1993)
AS/NZS 4153.1 Supplement 1:1999 General proceduresIncorporation of object identifiers components (Supplement to AS/NZS 4153.1:1994) (ISO/IEC 9834-1:1993/Amd 1:1997) 5pp
Incorporates object identifier components into the operation of OSI registration authorities. This Supplement is identical with and has been reproduced from ISO/IEC 9834-1:1993/Amd.1:1997. (IT-001)
AS/NZS 4148:1994 Information technologyHypermedia/Timebased structuring language (HyTime) (ISO/IEC 10744:1992) 125pp
Defines a language and underlying model for the representation of 'hyperdocuments' that link and synchronize static and dynamic (time-based) information contained in multiple conventional and multimedia documents and information objects. The language is known as the 'Hypermedia/Time-based structuring language', or 'HyTime'. This Standard is identical with, and has been reproduced from, ISO/IEC 10744:1992. (IT-029)
24pp
Establishes a model that relates the services and generic definitions provided by the object management function to user requirements. This Standard is identical with, and has been reproduced from, ISO/IEC 10164-1:1993. (IT-001)
AS/NZS 4153.1 Supplement 2:1999 General proceduresIncorporation of the root arcs of the object identifier tree (Supplement to AS/NZS 4153.1:1994) (ISO/IEC 9834-1:1993/Amd 2:1998) 5pp
Specifies the root arcs of the object identifier tree. This Supplement is identical with and has been reproduced from ISO/IEC 9834-1:1993/Amd.2:1998. (IT-001)
23pp
158
2pp
AS 4156 Coal preparation AS 4156.11994 Higher rank coalFloat and sink testing (ISO 7936:1992) 42pp
Describes general practice used in determining the float and sink characteristics of higher rank coal and indicates procedures for deriving test samples. Methods for presenting the washability data obtained, and methods for establishing some conventional plant performance parameters, are included. (MN-001)
This method is one of a series which specifies a test method for general access floors (elevated floors) for non-residential buidlings. To be used in conjunction with AS 41541993. (BD-063)
2pp
AS/NZS 4153.3:1999 Registration of values of RH-name-tree components for joint ISO and ITU-T use (ISO/IEC 9834-3:1998) 4pp
Specifies the assignment of values to RH-name-tree components for joint ISO-ITU-T use. This Standard is identical with and has been reproduced from ISO/IEC 9834-3:1998. (IT-001)
This method is one of a series which specifies a test method for general access floors (elevated floors) for non-residential buildings. To be used in conjunction with AS 41541993. (BD-063)
2pp
This method is one of a series which specifies a test method for general access floors (elevated floors) for non-residential buildings. To be used in conjunction with AS 41541993. (BD-063)
AS 4156.2.12004 Higher rank coalFroth flotationBasic test (ISO 8858-1:1990, ISO 8858-1:1990/Cor 1:2001) 11pp
Sets out a means of evaluating the flotation characteristics of a coal. Identical with ISO8858-1:1990 and and ISO8858-1:1990/Cor.1:2001. (MN-001)
6pp
Specifies the contents of register entries recording the information about VTE-profiles and assigning unambiguous names of ASN.1 type OBJECT IDENTIFIER to VTE-profile definitions. This Standard is identical with, and has been reproduced from, ISO/IEC 98344:1991. (IT-001)
11pp
Sets out a laboratory sequential procedure for the froth flotation testing of fine coal. It provides a means of evaluating for a coal the flotation characteristics that may be expected from the froth flotation process. (MN-001)
AS 4156.32008 Magnetite for coal preparation plant use Test methods 29pp
(MN-001)
AS/NZS 4153.6:1994 Application processes and application entities (ISO/IEC 9834-6:1993) 6pp
Specifies the procedures applicable to the registration of application-processes and application-entities. This Standard is identical with, and has been reproduced from, ISO/IEC 9834-6:1993. (IT-001)
32pp
Sets out the recommended principles and drawing conventions for flowsheets and symbols relating to coal preparation plant. (MN-001)
AS 4155.91993 Test for ultimate test load (safety factor tests for concentrated load) 1p
This method is one of a series which specifies a test method for general access floors (elevated floors) for non-residential buildings. To be used in conjunction with AS 41541993. (BD-063)
AS/NZS 4153.7:1999 Assignment of international names for use in specific contexts (ISO/IEC 9834-7:1998) 22pp
Specifies the unambiguous assignment of names in the context of O/R addresses, directory names and object identifiers. This Standard is identical with and has been reproduced from ISO/IEC 9834-7:1998. (IT-001)
43pp
2pp
This method is one of a series which specifies a test method for general access floors (elevated floors) for non-residential buildings. To be used in conjunction with AS 41541993. (BD-063)
Provides principles and methods for the expression of results of performance tests on sizing equipment used in coal preparation. This Standard is based on but not equivalent to ISO 10752:1994 and includes an additional worked example in Appendix E. (MN-001)
12pp
Amendment 1 5 August 1998 Specifies the performance requirements for the design and manufacture of general access floor systems installed in non-residential buildings. Also includes an Appendix with guidelines to purchasers on information to be supplied when calling for tenders or quotations; and guidelines for manufacturers on information to be supplied at the time of submitting a tender or quotation for the floor system. (BD-063)
AS 4155.111993 Test for dynamic rolling loads with the tread made from resinous polymer 9pp
This method is one of a series which specifies a test method for general access floors (elevated floors) for non-residential buildings. To be used in conjunction with AS 41541993. (BD-063)
AS 4155 Test methods for general access floors AS 4155.01993 Introduction and list of methods 1p
AS/NZS 4157 Information technologyTelecommunications and information exchange between systems X.25 DTE conformance testing AS/NZS 4157.1:2000 General principles (ISO/IEC 8882-1:1996)
5pp
Specifies a series of test methods for general access floors (elevated floors) for non-residential buildings. To be used in conjunction with AS 41541993. (BD-063)
Specifies the framework and principles of a set of tests to evaluate conformance of DTE to AS 3512 (ISO/IEC 7776) or AS/NZS 3621 (ISO/IEC 8208). This Standard is identical with and has been reproduced from ISO/IEC 8882-1:1996. (IT-001)
2pp
This method is one of a series which specifies a test method for general access floors (elevated floors) for non-residential buildings. To be used in conjunction with AS 41541993. (BD-063)
AS/NZS 4157.2:2000 Data link layer conformance test suite (ISO/IEC 8882-2:1995, ISO/IEC 88822:1995/Cor 1:1997) 205pp
Defines an abstract test suite for testing the conformance of the data link layer of a data terminal unit with respect to AS 3512 (ISO/IEC 7776). This Standard is identical with and has been reproduced from ISO/IEC 8882-2:1996. (IT-001)
2pp
This method is one of a series which specifies a test method for general access floors (elevated floors) for non-residential buildings. To be used in conjunction with AS 41541993. (BD-063)
159
AS/NZS 4157.3:2000
AS/NZS 4157.3:2000 Packet layer conformance test suite (ISO/IEC 8882-3:1995, ISO/IEC 88823:1995/Cor 1:1997) 470pp
Specifies a set of abstract tests for the testing of data terminal equipment operating at the packet layer designed to access a public or private packet-switched network conforming to ITU-T Recommendation X.25. This Standard is identical with and has been reproduced from ISO/IEC 8882-3:1995. (IT-001)
AS/NZS 4165:1994 Information technologyTelecommunications and information exchange between systems Formal description of AS/NZS 2912 (Classes 0, 1, 2, 3) in LOTOS (ISO/IEC TR 10024:1992) 144pp
Describes the classes 0, 1, 2 and 3 of the OSI transport protocol using the formal description technique LOTOS. This Standard is identical with, and has been reproduced from, ISO/IEC TR 10024:1992. (IT-001)
AS/NZS 4170.3:1994 Subnetwork-type independent requirements for group TD (ISO/IEC ISP 10609-3:1992) 7pp
Specifies a combination of OSI Standards, which collectively provide the connection-mode transport service using the connection-mode network service, and specifies the subnetwork-type independent requirements for group TD (transport protocol class 0). This Standard is identical with, and has been reproduced from, ISO/IEC ISP 10609-3:1992. (IT-001)
AS/NZS 4158:2003 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes 17pp
Amendment 1 30 September 2005 Specifies the requirements for factory-applied thermalbonded polymeric corrosion protective coatings (barrier coatings). (WS-022)
AS/NZS 4166:1994 Information processing systemsData communicationsUse of the X.25 packet level protocol in local area networks (ISO/IEC 8881:1989, ISO/IEC 8881:1989/Cor 1:1991) 7pp
Specifies the operation of the X.25 packet level protocol using the logical link control type 1 and 2 procedures as defined in AS/NZS 4802.2. This Standard is identical with, and has been reproduced from, ISO/IEC 8881:1989 and Technical Corrigendum 1:1991. (IT-001)
AS/NZS 4170.4:1994 Subnetwork-type independent requirements for group TE (ISO/IEC ISP 10609-4:1992) 7pp
Specifies a combination of OSI Standards, which collectively provide the connection-mode transport service using the connection-mode network service, and specifies the subnetwork-type independent requirements for group TE (transport protocol class 2). This Standard is identical with, and has been reproduced from, ISO/IEC ISP 10609-4:1992. (IT-001)
AS/NZS 4159 Information technologyFont information interchange AS/NZS 4159.1:1994 Architecture (ISO/IEC 9541-1:1991, ISO/IEC 95411:1991/Cor 1:1992)
AS/NZS 4167 Information technologyText and office systemsDocument filing and retrieval 82pp AS/NZS 4167.1:1994 Abstract service definition and procedures (ISO/IEC 10166-1:1991) 130pp
Specifies a client-server type model in accordance with the distributed-office-application model, specifies functions and services provided by document filing and retrieval (DFR) servers, specifies a DFR model for managing documents and groups of documents, and specifies the DFR abstract service using the principles established by the abstract service definition conventions. This Standard is identical with, and has been reproduced from, ISO/IEC 10166-1:1991. (IT-001)
Defines a method of naming glyphs and glyph collections, independent of any document encoding technique; it assumes that one or more methods of associating document encoding techniques with glyph identifiers used in font resources will be provided by text processing systems. This Standard is identical with, and has been reproduced from, ISO/IEC 9541-1:1991 and Technical Corrigendum 1:1992. (IT-033)
32pp
Specifies the interchange formats for font information, and the minimum subsets of that information required for interchange. This Standard is identical with, and has been reproduced from, ISO/IEC 9541-2:1991 and Technical Corrigendum 1:1993. (IT-033)
11pp
AS/NZS 4160:1994 Information processing systemsInformation exchange between systemsSynchronous transmission signal quality at DTE/DCE interfaces (ISO 9543:1989) 11pp
Specifies signal quality requirements for serial data transmission at the interface between synchronous transmission data terminal equipment and data circuit-terminating equipment. This Standard is identical with, and has been reproduced from, ISO 9543:1989. (IT-001)
Specifies the abstract syntax of the document filing and retrieval (DFR) access protocol, specifies how the DFR access protocol supports the DFR abstract service, specifies the mapping of the DFR access protocol onto the services used and specifies the requirements for conformance with DFR access protocol. This Standard is identical with, and has been reproduced from, ISO/IEC 10166-2:1991. (IT-001)
AS/NZS 4161:2000 Information technologyTelecommunications and information exchange between systems DTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits (ISO/IEC 8480:1995) 5pp
Specifies the procedure for back-up operation applicable to data transmission on a leased line when implemented through a single interface, controlling both the leased and the back-up facilities using ITU-T Recommendation V.24. This Standard is identical with and has been reproduced from ISO/IEC 8480:1995. (IT-001)
3pp
AS/NZS 4170 Information technologyInternational standardized profiles TB, TC, TD and TE Connection-mode transport service over connection-mode network service AS/NZS 4170.1:1994 Subnetwork-type independent requirements for group TB (ISO/IEC ISP 10609-1:1992) 12pp
Specifies a combination of OSI Standards, which collectively provide the connection-mode transport service using the connection-mode network service, and specifies the subnetwork-type independent requirements for group TB (transport protocol classes 0, 2 and 4). This Standard is identical with, and has been reproduced from, ISO/IEC ISP 10609-1:1992. (IT-001)
Specifies a combination of OSI Standards, which collectively provide the connection-mode transport service using the connection-mode network service, and specifies the definition of profiles TE1111/TE1121. These profiles are in the TE group (transport class 2). This Standard is identical with, and has been reproduced from, ISO/IEC ISP 10609-8:1992. (IT-001)
AS/NZS 4162:1994 Information technologyGalvanic isolation of balanced interchange circuits (ISO/IEC 9549:1990) 7pp
Specifies galvanic isolation of balanced interchange circuits using optocoupler integrated circuit technology and provides for data transmission in the two-condition code. This Standard is identical with, and has been reproduced from, ISO/IEC 9549:1990. (IT-001)
AS/NZS 4170.9:1994 Subnetwork-type dependent requirements for the network layer, data link layer and physical layer concerning permanent access to a packet switched data network using virtual calls (ISO/IEC ISP 10609-9:1992) 26pp
Specifies a combination of OSI Standards, which collectively provide the connection-mode transport service using the connection-mode network service, and specifies the requirements for the network layer, data link layer and physical layer that apply to configurations involving permanent access to packet switched data network using virtual calls. This Standard is identical with, and has been reproduced from, ISO/IEC ISP 10609-9:1992. (IT-001)
AS/NZS 4164:1994 Information technologyTelecommunications and information exchange between systems Formal description of AS 2911 in LOTOS (ISO/IEC TR 10023:1992) 27pp
Describes the OSI transport service using the formal description technique LOTOS. This Standard is identical with, and has been reproduced from, ISO/IEC TR 10023:1992. (IT-001)
AS/NZS 4170.2:1994 Subnetwork-type independent requirements for group TC (ISO/IEC ISP 10609-2:1992) 8pp
Specifies a combination of OSI Standards, which collectively provide the connection-mode transport service using the connection-mode network service, and specifies the subnetwork-type independent requirements for group TC (transport protocol classes 0 and 2). This Standard is identical with, and has been reproduced from, ISO/IEC ISP 10609-2:1992. (IT-001)
5pp
Specifies methods of calculating the basic static load rating and the static equivalent load for rolling bearings, manufactured from good quality hardened steel and basically of conventional design as regards the shape of rolling contact
160
AS/NZS 4179:1997 Single-use sterile surgical rubber gloves Specification (ISO 10282:1994) 13pp
Amendment 1 5 November 1998 Specifies requirements for packaged sterile gloves intended for use in surgical procedures to protect the patient and the user from cross-contamination. It is applicable to single-use gloves that are worn once and then discarded. Does not apply to examination gloves. It is equivalent to and reproduced from ISO 10282:1994. Appendices contain variations to physical properties and marking requirements. (HE-013)
63pp
AS/NZS 4184.2.3:1994 Constancy testsDarkroom safelight conditions (IEC/TR 61223-2-3 Ed. 1.0 (Bilingual 1993)) 18pp
Applies to darkrooms in X-ray facilities where the image is processed either on film or by electronic means. It is identical with and reproduced from IEC 1223-23:1993. (HE-003)
Defines terms relevant to rolling bearings and their technology. It is identical with and reproduced from ISO 5593:1984. (ME-037)
AS/NZS 4173:2004 Guide to the safe use of lasers in health care 93pp
Provides guidance for the safe use of lasers and laser systems in diagnostic, cosmetic, therapeutic, medical and dental procedures in the treatment of humans. (HE-003)
AS 4180 Measurement of drift loss from cooling towers AS 4180.12008 Chloride balance method 12pp
AS/NZS 4184.2.4:1995 Constancy testsHard copy cameras (IEC 61223-2-4 Ed. 1.0 (Bilingual 1994)) 23pp
Applies to constancy tests for hard copy cameras producing images on monochrome material such as photographic film or materials sensitive to infrared radiation. It covers those types of imaging devices used in digital radiography, digital subtraction angiography, computed tomography, magnetic resonance imaging, ultrasound and nuclear medicine. This Standard is identical with and has been reproduced from IEC 1223-2-4:1994. (HE-003)
9pp
Amendment 1 5 May 1996 Specifies minimum strength requirements for shadecloth and a method for determining the cover factor of a shadecloth, giving colour coded designations for the various cover factor ranges. Provides methods of measuring and reporting the transmission of radiation of a shadecloth, including UV-visible radiation and solar radiation. (TX-008)
Sets out the requirements for measuring the drift of circulating water into the atmosphere by a chloride ion mass balance on the water circuit, under laboratory conditions. (ME-062)
11pp
Sets out the requirements for measuring the drift of circulating water into the atmosphere by observing the mass of chloride ions missing from the water circuit under controlled conditions. (ME-062)
AS/NZS 4184.2.5:1995 Constancy testsImage display devices (IEC 61223-2-5 Ed. 1.0 (Bilingual 1994)) 30pp
Applies to image display devices used in diagnostic imaging systems such as digital radiography, digital subtraction angiography, computed tomography, magnetic resonance imaging, ultrasound and nuclear medicine. This Standard is identical with and has been reproduced from IEC 1223-2-5:1994. (HE-003)
AS 41761994 Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications 26pp
Specifies requirements for macro-composite pipes and associated fittings for the conveyance of fluids including compressed air, gaseous fuels and water in agricultural, industrial, domestic and other applications in sizes ranging from 14 to 25 mm outside diameter. The macro-composite pipes covered by this Standard consist of a welded aluminium tube encapsulated in, and bonded to, an inner and an outer layer of polyethylene or cross-linked polyethylene. (PL-006)
AS 41821994 Automotive repairsCode of practice for reconditioning reciprocating spark ignition engines 10pp
Specifies a code of practice for reconditioning or remanufacturing spark ignition, automotive and industrial engines. (CS-078)
AS/NZS 4184.2.6:1995 Constancy testsX-ray equipment for computed tomography (IEC 61223-2-6 Ed. 1.0 (Bilingual 1994)) 22pp
Amendment 1 5 May 1996 Applies to those radiological installations with diagnostic X-ray equipment for computed tomography. It is one of a series of publications intended to assist in the establishment and operation of a quality assurance program in the diagnostic X-ray department. It is identical with and has been reproduced from IEC 1223-26:1994. (HE-003)
22pp
AS 4177 Caravan and light trailer towing components AS 4177.12004 Towbars and towing brackets 11pp
Defines terms, establishes the essential elements of Value Management and clarifies roles and responsibilities. It provides guidelines for the application of Value Management to products, processes, services, organizations and systems. (OB-006)
AS/NZS 4184.2.7:2002 Constancy testsEquipment for intra-oral dental radiography (IEC 61223-2-7:1999, MOD) 19pp
Applies to radiological installations with diagnostic Xray systems designed to expose intra-orally placed image receptors such as films and photostimulable phosphor sensosrs. It does not apply to- (a) systems using electronic image receptors such as charge coupled devices; and (b) diagnostic X-ray systems designed to expose extra-orally placed image receptors such as dental panoramic equipment and equipment for cephalometric radiography. This Standard modifies, and has been reproduced from, IEC 61223-2-7:1999 with variations for Australia and New Zealand included in a ZZ Appendix. (HE-008)
Amendment 1 26 April 2006 Amendment 2 13 November 2006 Specifies the requirements for towbars and towing brackets for use with 50mm towballs, intended for trailers and caravans up to 3.5t aggregate trailer mass, for use on public roads. (ME-052)
AS/NZS 4184 Evaluation and routine testing in medical imaging departments AS/NZS 4184.1:1994 General aspects (IEC/TS 61223-1 Ed. 1.0 (Bilingual 1993)) 15pp
Defines test methods to be carried out on equipment and subassemblies of X-ray imaging installations to assess the constancy of functional performance by means of test instrumentation and test devices that are simple to use. It is identical with and reproduced from IEC 1223-1:1993. (HE-003)
AS 4177.22004 50 mm towballs
9pp
Specifies the requirements for towballs for towing vehicles of up to 5t towing vehicle mass, intended for towing trailers and caravans of up to 3.5t aggregate trailer mass for use on public roads. (ME-052)
9pp
Specifies the classification, design, interchangeability dimensions with tolerances, finish and marking requirements for coupling bodies for 50mm towballs, intended for trailers and caravans up to 3.5t aggregate trailer mass, for use on public roads. (ME-052)
AS/NZS 4184.2.1:1994 Constancy testsFilm processors (IEC/TS 61223-2-1 Ed. 1.0 (Bilingual 1993)) 24pp
Applies to those components of medical X-ray equipment which process radiographic images both on film and by electronic means. It is identical with and reproduced from IEC 1223-2-1:1993. (HE-003)
AS/NZS 4184.2.9:2002 Constancy testsEquipment for indirect radioscopy and indirect radiography (IEC 61223-2-9 Ed. 1.0 (Bilingual 1999)) 17pp
Applies to those components of X-ray equipment which generate, influence the propagation of, and detect X-radiation, and process, present and store diagnostic X-ray images in radiological installations with diagnostic X-ray systems for indirect radioscopy and indirect radiography which use X-ray image intensifiers in conjunction with analogue and/or digital storage systems. This Standard is identical with, and has been reproduced from, IEC 61223-2-9:1999. (HE-008)
13pp
Specifies the design, construction and performance requirements of electrical connectors, for making detachable electrical connections between motor vehicles and trailers. (ME-052)
AS/NZS 4184.2.2:1994 Constancy testsRadiographic cassettes and film changersFilm-screen contact and relative sensitivity of the screencassette assembly (IEC/TR 61223-2-2 Ed. 1.0 (Bilingual 1993)) 18pp
Applies to radiographic cassettes and to film changers equipped with intensifying screens used to record an X-ray pattern on radiographic film by direct radiography. It is identical with and reproduced from IEC 1223-2-2:1993. (HE-003)
AS/NZS 4184.2.11:2002 Constancy testsEquipment for general direct radiography (IEC 61223-2-11 Ed. 1.0 E (1999)) 36pp
Specifies requirements for those components of X-ray equipment which generate, influence the propagation of, and detect X-radiation, and process, present and store radiographic information in radiological installations with diagnostic X-ray systems using radiographic film in direct radiography. Does not apply to mammographic, intra-oral, cephalometric and dental panoramic X-ray equipment. This Standard is to be read in conjunction with AS/NZS 3200.1.0:1998. It modifies, and has been reproduced from, IEC 61223-
5pp
Specifies design, performance and testing of electromagnetic door holders intended for general use. (CS-082)
161
AS/NZS 4184.3.1:2002
2-11:1999 with variations for Australia and New Zealand included in an Appendix. (HE-008) pler test objects for determining performance properties of Doppler ultrasonic systems. It is identical with and reproduced from IEC 1206:1993. (HE-003)
AS/NZS 4184.3.1:2002 Acceptance testsImaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1 Ed. 1.0 (1999)) 44pp
Specifies requirements for those components of X-ray equipment which influence the image quality and patient dose of diagnostic X-ray systems using radiographic and radioscopic imaging systems. Does not apply to mammographic, intra-oral, cephalometric and dental panoramic X-ray equipment. This Standard is to be read in conjunction with AS/NZS 3200.1.0:1998. It modifies, and has been reproduced from, IEC 61223-3-1:1999 with variations for Australia and New Zealand included in an Appendix. (HE-008)
AS/NZS 4189 Information technologyUniversal multipleoctet coded Character Set (UCS) AS/NZS 4189.1:1994 Architecture and basic multilingual plane (ISO/IEC 10646-1:1993) 754pp
This Standard is applicable to the representation, transmission, interchange, processing, storage, input and presentation of the written form of the languages (scripts) of the world, as well as additional symbols. This Part specifies the overall architecture and the basic multilingual plane of the UCS. This Standard is technically identical with, and has been reproduced from, ISO/IEC 10646-1:1993. (IT-001)
AS/NZS 4197 Information and documentationOpen Systems InterconnectionInterlibrary loan application protocol specification AS/NZS 4197.1:1999 Protocol specification (ISO 10161-1:1997)
109pp
Defines the protocol for an ILL application-service element (ASE). The Standard specifies the behaviour which must be exhibited by the system in order to take part in the provision of ISO interlibrary loan service. This Standard is identical with and has been reproduced from ISO 10161-1:1997. (IT-019)
AS/NZS 4197.2:1999 Protocol implementation conformance statement (PICS) proforma (ISO 10161-2:1997) 38pp
Defines the technical specifications of the PICS proforma for ILL protocol. This Standard is identical with and has been reproduced from ISO 10161-2:1997. (IT-019)
AS/NZS 4184.3.2:1998 Acceptance testsImaging performance of mammographic X-ray equipment (IEC 61223-3-2 Ed. 1.0 (Bilingual 1996)) 16pp
Specifies in-service testing procedures to ensure that the image quality of radiograms produced by mammographic X-ray equipment is maintained within required tolerances. This Standard includes an additional local Appendix ZZ, and is based on but not equivalent to and reproduced from IEC 1223-3-2:1996. (HE-003)
AS/NZS 4190:1994 UltrasonicsFieldsGuidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5 MHz to 15 MHz (IEC/TS 61220 Ed. 1.0 (Bilingual 1993)) 23pp
Provides guidance on the practical measurement of the acoustic output of various types of medical ultrasonic equipment in the frequency range of 0.5 MHz to 15 MHz based on the use of hydrophones. It is identical with and reproduced from IEC 1220:1993. (HE-003)
AS/NZS 4184.3.3:1998 Acceptance testsImaging performance of X-ray equipment for digital subtraction angiography (DSA) (IEC 61223-3-3 Ed. 1.0 (Bilingual 1996)) 15pp
Specifies in-service testing procedures to ensure that the imaging quality of digital subtraction angiography (DSA) systems is maintained within required tolerances. This Standard is identical with and has been reproduced from IEC 61223-3-3:1996. (HE-003)
20pp
Specifies requirements for the design, construction and performance of three-colour portable signal systems for use where temporary control of vehicular traffic is required, such as road or bridge works. Provides for the two main forms of control, viz. shuttle control and plant crossing control. Does not cover the use of these signal systems in specific road situations. (LG-006)
AS/NZS 4184.3.4:2002 Acceptance testsImaging performance of dental X-ray equipment (IEC 61223-3-4 Ed. 1.0 (English 2000)) 29pp
Applies to those components of dental X-ray equipment using radiographic imaging systems which influence the image quality and patient dose. Also applies to the performance of the acceptance tests on dental X-ray equipment with intra-oral X-ray image receptors and dental X-ray equipment with extra-oral X-ray image receptor, and to dental film and digital image acquisition on processing. It is identical with, and reproduced from, IEC 61223-3-4:2000. (HE-008)
30pp
Amendment 1 9 February 2007 Specifies requirements for the design, construction and performance of signs intended to display specific patterns of flashing yellow, circular lit elements, including arrows, typically used for the temporary diversion of vehicular traffic on roads. (LG-006)
AS/NZS 4199:1994 Information processing systemsOpen Systems InterconnectionLOTOSA formal description technique based on the temporal ordering of observational behaviour (ISO 8807:1989) 142pp
Defines a formal description technique based on the assumption that systems can be described by defining the temporal relation between events in the externally observable behaviour of the system, thus resulting in a system description that is complete, consistent, concise, unambiguous and precise. This Standard is identical with, and has been reproduced from, ISO 8807:1989. (IT-001)
AS/NZS 4194:1994 Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment (IEC 61157 Ed. 1.0 (Bilingual 1992)) 27pp
Establishes requirements for the declaration of the acoustic output of medical diagnostic equipment for the information of intending purchasers. This Standard is identical with and reproduced from IEC 1157:1993. (HE-003)
AS/NZS 4200 Pliable building membranes and underlays AS/NZS 4200.1:1994 Materials 10pp
AS 41851994 PolarimetersSugarAutomatic
9pp
Specifies the requirements for automatic polarimeters used to determine the sucrose content of sugar mill products. (CH-001)
AS 4195 Analysis of serum and plasma for trace elements AS 4195.11994 Determination of aluminium content Graphite furnace atomic absorption spectrometric method 13pp
Specifies a graphite furnace atomic absorption spectrometric method for the determination of aluminium in human serum or plasma in the range 0.4 mol/L to 6.0 mol/L. A method for determining the contaminant aluminium levels of collection materials and a procedure for the collection of blood are appended. (CH-036)
Amendment 1 5 December 1994 Specifies the requirements for materials suitable for use as a pliable building membrane (also known as underlay) when it is intended to act as a sarking membrane or thermal insulation, or a vapour barrier in a domestic, commercial or industrial building. It does not specify the thermal insulation requirements, nor does it include materials for use in air handling ducts. (BD-048)
6pp
AS/NZS 4187:2003 Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities 121pp
Sets out procedures and process development which can be validated for the cleaning, disinfection and sterilization of reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities. May be suitable for application to the instruments and equipment used exclusively on animals in veterinary practice. (HE-023)
Specifies the installation procedures for a pliable building membrane (also known as underlay) when it is intended to act as a sarking membrane or thermal insulation, or a vapour barrier in a domestic, commercial or industrial building. It specifies the installation requirements when the membrane is used under sheet roofing, tile roofing or in walls. (BD-048)
AS/NZS 4196:1999 Information and documentationOpen Systems InterconnectionInterlibrary loan application service definition (ISO 10160:1997) 59pp
Defines the technical specification of the Application Layer Standard within the Open Systems Interconnection framework of AS/NZS 2777. This Standard defines the services for interlibrary loan. This Standard is identical with and has been reproduced from ISO 10160:1997. (IT-019)
AS/NZS 4201 Pliable building membranes and underlays Methods of test AS/NZS 4201.0:1994 General introduction and list of methods 1p
Specifies a series of test methods for pliable building membranes and underlays for domestic, commercial and industrial applications. (BD-048)
AS/NZS 4188:1994 UltrasonicsContinuous-wave Doppler systemsTest procedures (IEC/TS 61206 Ed. 1.0 (Bilingual 1993)) 27pp
Describes test methods for measuring the performance of continuous-wave ultrasonic Doppler flowmeters, velocimeters, or foetal heart detectors. It also describes special Dop-
162
1p
151pp
Determines the ability of a pliable building membrane material to resist delamination in hot, dry conditions. (BD-048)
1p
Amendment 1 5 May 2005 Specifies requirements for the design, installation, commissioning, testing, and safety of gaseous fire extinguishing systems in building, plant or other structures, and the characteristics of the various extinguishing agents and types of fire for which they are suitable. (FP-011)
Determines the ability of a pliable building membrane material to resist delamination in hot, humid conditions. (BD-048)
2pp
Determines the extent to which pliable building membrane material shrinks in the machine direction following repeated wetting and drying. (BD-048)
AS/NZS 4210 Information technologyTelecommunications and information exchange between systems Transport conformance testing for connection-mode transport protocol operating over connection-mode network service AS/NZS 4210.3:1994 Transport test management protocol specification (ISO/IEC 10025-3:1993) 41pp
Provides the structure and encoding of the test management protocol data units used for the transfer of data and control information from a lower tester to an upper tester. This Standard is identical with, and has been reproduced from, ISO/IEC 10025-3:1993. (IT-001)
AS 4215 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases AS 4215.01995 General introduction and list of methods 1p
Sets out test procedures for determining fire extinguishing and inerting concentration for flammable liquids and gases. (FP-011)
1p
Determines the ability of a pliable building membrane material to resist water penetration. (BD-048)
1p
Determines the infra-red emittance by the optical method, of a face of a pliable building membrane. (BD-048)
2pp
AS 4211 Gas recovery or combined recovery and recycling equipment AS 4211.11996 Fluorocarbon refrigerants from automotive airconditioning systems 11pp
Specifies the minimum equipment requirements for safe and efficient recovery or combined recovery and recycling of refrigerants directly removed from and intended for reuse in automotive air-conditioning systems. It specifies test methods to determine equipment performance and minimum purity levels allowed for recycled R12 and R134a refrigerants. This Standard applies to equipment used to service cars, trucks and other vehicles with similar air-conditioning systems. Equipment used on mobile vehicles that have hermetically sealed systems for refrigerated cargo are not covered in this document. (EV-012)
9pp
Specifies constructional and test requirements for two classes of flexible insulating covers for indoor and outdoor use. The covers may be tube type or drape type and are intended to be used to cover live equipment, with a working voltage not exceeding 650 V, to prevent accidental contact by persons working nearby. (EL-004)
AS/NZS 4217:1994 Information technologyTelecommunications and information exchange between systems Provision of the connection-mode network internal layer service by intermediate systems using the X.25 packet layer protocol (ISO/IEC 10177:1993) 29pp
Defines a method by which a network-layer interworking unit uses the X.25 packet layer protocol to support the OSI connection-mode network service. This Standard is identical with, and has been reproduced from, ISO/IEC 10177:1993. (IT-001)
22pp
Specifies minimum structural design criteria, performance and renovation requirements for cemetery monuments and crematoria memorial gardens above and below the natural ground surface. The Standard also gives guidelines on installation practice and guidelines for war grave monuments. It does not set out to preclude artistic endeavour. This Standard does not apply to pet cemeteries or to public monuments other than cemetery monuments. This Standard is intended for use by cemetery authorities, monumental masons and all personnel concerned with the installation, renovation and general requirements of cemetery monuments. (BD-071)
AS 4211.31996 Fluorocarbon refrigerants from commercial/domestic refrigeration and airconditioning systems 18pp
Specifies the minimum equipment requirements for safe and efficient recovery or combined recovery and recycling of refrigerants, in both liquid and vapour state, that have been directly removed from and intended for reuse in commercial or domestic HVAC/R systems. It also specifies test methods to determine equipment performance. (EV-012)
AS/NZS 4218 Information technologyOpen Systems InterconnectionConformance test suite for the FTAM protocol AS/NZS 4218.1:1994 Test suite structure and test purposes (ISO/IEC 10170-1:1993) 108pp
Provides a specification of a test suite structure and test purposes for the whole of the FTAM protocol. This Standard is identical with, and has been reproduced from, ISO/IEC 10170-1:1993. (IT-001)
AS 4205 Analysis of urine for trace elements AS 4205.21994 Determination of copper, cadmium and leadFlame atomic absorption spectrometric method 8pp
Specifies a flame atomic absorption spectrometric method using direct aspiration of the extracted iodide complexes into an air/acetylene flame, for the determination of copper, cadmium or lead in urine. The method is suitable for the following ranges of cadmium 0.02 to 0.20 mol, copper 0.30 to 4.00 mol and lead 0.10 to 2.00 mol. (CH-036)
AS/NZS 4213 Radiotherapy simulators AS/NZS 4213.1:1994 Functional performance characteristics (IEC 61168 Ed. 1.0 (Bilingual 1993)) 28pp
Provides guidance to manufacturers on the needs of the radiotherapist in respect to the performance of radiotherapy simulators and guidance to users wishing to check the manufacturer's declared performance characteristics, to carry out acceptance tests and to check periodically the performance throughout the life of the equipment. It is identical with, and reproduced from, IEC 1168:1993. (HE-003)
32pp
Sets out essential safety requirements for bunk beds used in domestic situations, nurseries and institutions, and functional durability, stability and performance criteria to meet these safety requirements, in order to reduce the likelihood of deaths and injuries. (CS-003)
AS/NZS 4206:1994 Information technologyOpen Systems InterconnectionLOTOS description of the session protocol (ISO/IEC TR 9572:1989) 86pp
Provides the formal definitions of the OSI basic connection oriented session protocol described by the formal description technique LOTOS. This Standard is identical with, and has been reproduced from, ISO/IEC TR 9572:1989. (IT-001)
30pp
AS/NZS 4213.2:1994 Guidelines for functional performance characteristics (IEC/TS 61170 Ed. 1.0 (Bilingual 1993)) 7pp
Applies to radiotherapy simulators which use diagnostic X-ray equipment to simulate a radiotherapy radiation beam so that the treatment volume to be irradiated during radiotherapy can be located and the position and size of the therapeutic radiation field can be confirmed. It is identical with, and reproduced from, IEC 1170:1993. (HE-003)
Specifies safety requirements for bunk beds. These requirements include material, construction, design and performance, all of which are important for the well-being of the occupants (especially children), who use bunk beds. (CS-003)
AS/NZS 4222 Information technologyOpen Systems InterconnectionConformance test suite for the presentation layer AS/NZS 4222.1:1994 Test suite structure and test purposes for the presentation protocol (ISO/IEC 10729-1:1993) 18pp
Specifies a test suite structure and test purposes for the presentation protocol (excluding X.4101984 mode). This Standard is identical with and has been reproduced from ISO/IEC 10729-1:1993. (IT-001)
AS/NZS 4207:1994 Information technologyOpen Systems InterconnectionLOTOS description of the session service (ISO/IEC TR 9571:1989) 47pp
Provides the formal definitions of the OSI basic connection oriented session service described by the formal description technique LOTOS. This Standard is identical with, and has been reproduced from, ISO/IEC TR 9571:1989. (IT-001)
163
AS/NZS 4223.1:1994
AS/NZS 4223 Information technologyInternational standardized profile FOD11Open document format: Simple document structureCharacter content architecture only AS/NZS 4223.1:1994 Document application profile (ISO/IEC ISP 10610-1:1993) AS/NZS 4229.2:1994 TA51 profile including subnetworkdependent requirements for CSMA/CD local area networks (ISO/IEC ISP 10608-2:1992) 9pp
Specifies subnetwork-type dependent requirements for end system operation when the end system is attached to a CSMA/CD local area network. This Standard is identical with and has been reproduced from ISO/IEC ISP 10608-2:1992. (IT-001)
AS/NZS 4232:1994 Information technologyUse of X.25 packet layer protocol in conjunction with X.21/X.21bis to provide the OSI connectionmode network service (ISO/IEC 10588:1993) 10pp
Specifies the mapping of the OSI connection-mode network service primitives and parameters to and from the elements of the protocols used by X.25 and X.21. This Standard is identical with and has been reproduced from ISO/IEC 10588:1993. (IT-001)
63pp
Specifies the interchange formats for the transfer of structured documents (character content only) between equipment designed for word or document processing. This Standard is identical with and has been reproduced from ISO/IEC ISP 10610-1:1993. (IT-001)
AS/NZS 4224:1994 Information technologyUse of X.25 packet layer protocol to provide the OSI connectionmode network service over the telephone network (ISO/IEC 10732:1993) 7pp
Specifies the mapping of the connection-mode network service primitives and parameters to and from the elements used by the X.25 packet layer protocol when used over the telephone network. This Standard is identical with and has been reproduced from ISO/IEC 10732:1993. (IT-001)
AS/NZS 4229.5:1994 TA1111/TA1121 profiles including subnetwork-dependent requirements for X.25 packet-switched data networks using virtual calls (ISO/IEC ISP 10608-5:1992) 7pp
Specifies subnetwork-type dependent requirements for end system operation when the end system is attached to a X.25 packet-switched data network by a dedicated access line and using switched virtual calls. This Standard is identical with and has been reproduced from ISO/IEC ISP 10608-5:1992. (IT-001)
AS/NZS 4233 High pressure water (hydro) jetting systems AS/NZS 4233.1:1999 Guidelines for safe operation and maintenance 27pp
Provides guidance on the various issues which need to be addressed when high pressure water jetting operations are performed. The Standard also provides recommendations for the elimination or reduction of hazards and risk associated with high pressure water jetting operations. (SF-043)
AS/NZS 4225 Information technologyText and office systemsOffice document architecture and interchange formatTechnical report on AS 3951 (ISO 8613) implementation testing AS/NZS 4225.1:1994 Testing methodology (ISO/IEC TR 10183-1:1993)
AS/NZS 4230 Information technologyCoding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s AS/NZS 4230.1:1994 Systems (ISO/IEC 11172-1:1993)
13pp
Proposes minimum requirements for the construction and performance of high pressure water jetting systems and associated equipment and componentry. (SF-043)
53pp
14pp
Specifies the system layer of the coding (sometimes known as MPEG 1) developed to support the video and audio methods defined in Parts 1 and 2 of this Standard. This Standard is identical with and has been reproduced from ISO/IEC 11172-1:1993. (IT-029)
Defines a testing methodology and provides a framework for specifying abstract test cases for implementation testing, so providing a base for testing the interworking capability of ODA implementations. This Standard is identical with and has been reproduced from ISO/IEC TR 10183-1:1993. (IT-027)
112pp
42pp
Specifies the coding and decoding representation (sometimes known as MPEG 1) of video for digital storage media. This Standard is identical with and has been reproduced from ISO/IEC 11172-2:1993. (IT-029)
Sets out guidelines for the design of safe dwellings. It describes design factors to be taken into account to reduce the likelihood of an injurious incident occurring in association with any building element or fitting, either alone or in association with other elements. (CS-072)
150pp
AS/NZS 4227:1994 Information technologyInformation resource dictionary system services interface (ISO/IEC 10728:1993) 108pp
Specifies a services interface that gives any program full access to all information resource dictionary system services through whatever external call interface is provided by the language in which the program is written. This Standard is identical with and has been reproduced from ISO/IEC 10728:1993. (IT-001)
Specifies the coding and decoding representation (sometimes known as MPEG 1) of high quality audio for storage media. This Standard is identical with and has been reproduced from ISO/IEC 11172-3:1993. (IT-029)
AS 42341994 Solar water heatersDomestic and heat pumpCalculation of energy consumption 29pp Available Superseded
Sets out a method of determining the annual performance of domestic solar and heat pump water heaters using a combination of test results for component performance and a mathematical model to determine annual load cycle task performance. Together with the Standard a software disk is provided. It contains a program for evaluation of energy consumption of the solar water heaters under testing. (CS-028)
42pp
AS/NZS 4228:1994 Information technologyTelecommunications and information exchange between systems Standard group medium access control addresses (ISO/IEC TR 10735:1993) 9pp
Describes the binary and illustrative representation of the medium access control addresses as used by LANs conforming to AS 4802 (ISO/IEC 8802). This Standard is identical with and has been reproduced from ISO/IEC TR 10735:1993. (IT-001)
Specifies procedures to determine characteristics of coded bitstreams and to test compliance of bitstreams and decoders with the requirements specified in Part 1, 2 and 3 of AS/NZS 4230. This Standard is identical with and has been reproduced from ISO/IEC 111724:1995. (IT-029)
AS/NZS 4236:1994 Respiratory therapy equipmentJet nebulizers and jet nebulizer air pumps 11pp
Specifies performance and safety requirements for jet nebulizers and associated portable air pumps used in respiratory drug therapy. Appendices include methods for determining minimum aerosol output, residual volume, minimum fill volume and performance at normal orientation and at maximum angle of tilt of the jet nebulizer, determination of particle size and non-spill volume. (HE-019)
13pp
Provides a C language software simulation of an encoder and decoder for AS/NZS 4230.1, AS/NZS 4230.2 and AS/NZS 4230.3. This Standard is identical with and has been reproduced from ISO/IEC TR 11172-5:1998. (IT-029)
AS/NZS 4229 Information technologyInternational standardized profile TAnnnnConnection-mode transport service over connectionless-mode network service AS/NZS 4229.1:1994 General overview and subnetworkindependent requirements (ISO/IEC ISP 10608-1:1992)
AS/NZS 4231:1994 Information technologyTelecommunications and information exchange between systems Elements of management information related to OSI network layer standards (ISO/IEC 10733:1993) 130pp
Specifies the management information within an open system related to operations of the OSI network layer. This Standard is identical with and has been reproduced from ISO/IEC 10733:1993. (IT-001)
16pp
Specifies a combination of OSI Standards which collectively provide the connection-mode transport service using the connectionless-mode network service. This Standard is identical with and has been reproduced from ISO/IEC ISP 10608-1:1992. (IT-001)
AS/NZS 4238:1996 Information technologyTelecommunications and information exchange between systems Private integrated services networkCircuitmode multi-rate bearer servicesService description, functional capabilities and information flows (ISO/IEC 11584:1996) 10pp
Specifies service description and control aspects of the multi-rate circuit-mode basic services which may be sup
164
AS/NZS 4239:1996 Information technologyTelecommunications and information exchange between systems Private integrated services networkGeneric functional protocol for the support of supplementary servicesInter-exchange signalling procedures and protocol (ISO/IEC 11582:1995) 80pp
Defines the signalling protocol for the control of supplementary services and additional network features (ANFs) at the Q reference point in private integrated services networks (PISNs). It is one of a series of Standards applicable to PISN. This Standard is identical with and has been reproduced from ISO/IEC 11582:1995. (IT-016)
AS/NZS 4246 Information technologyInternational standardized profile FOD26Open document format: Enhanced document structure Character, raster graphics and geometric graphics content architectures AS/NZS 4246.1:1994 Document application profile (ISO/IEC ISP 11181-1:1993)
AS 4250 Liquid hydrocarbonsDynamic measurementProving systems for volumetric meters AS 4250.11995 General principles (ISO 7278-1:1987)
5pp
133pp
Specifies the interchange formats (character, raster and geometric graphics) for the transfer of enhanced structured documents between equipment designed for word or document processing. This Standard is identical with and has been reproduced from ISO/IEC ISP 11181-1:1993. (IT-001)
Specifies general principles for proving systems for meters used in dynamic measurement of liquid hydrocarbons. This Standard is identical with and has been reproduced from ISO 7278-1:1987. (ME-049)
18pp
37pp
Provides guidance for the design, construction and general safeguarding of remote control systems for mining equipment. Guidance for training of personnel as well as maintenance and safe operation of control systems are also included. This Standard is applicable to both the coal and metalliferous mining industries. (EL-023)
AS/NZS 4247 Information technologyInternational standardized profile FOD36Open document format: Extended document structure Character, raster graphics and geometric graphics content architectures AS/NZS 4247.1:1994 Document application profile (ISO/IEC ISP 11182-1:1993)
Provides guidance for the design, installation and calibration of pipe provers. This Standard is identical with and has been reproduced from ISO 7278-2:1988. (ME-049)
8pp
242pp
AS 42411994 AcousticsInstruments for the measurement of sound intensityMeasurement with pairs of pressure sensing microphones (IEC 61043 Ed. 1.0 (Bilingual 1993)) 20pp
Specifies the requirements for sound intensity instruments, comprising sound intensity probes and processors which detect sound intensity by pairs of spatially separated pressure sensing microphones. It also specifies requirements for calibrators and the calibration of sound intensity instruments. This Standard is identical with and reproduced from IEC 1043:1993. (AV-002)
Specifies the interchange formats (character, raster and geometric graphics) for the transfer of extended structured documents between equipment designed for word or document processing. This Standard is identical with and has been reproduced from ISO/IEC ISP 11182-1:1993. (IT-001)
Specifies the three pulse interpolation techniques most commonly used and their conditions of use. The Standard also describes the equipment and test procedures used for checking that the pulse interpolation system is operating satisfactorily. This Standard is identical with and has been reproduced from ISO 7278-3:1986. (ME-049)
AS/NZS 4248 Information technologyInternational standardized profiles AOM1n OSI management Management communications AS/NZS 4248.1:1994 Specification of ACSE, presentation and session protocols for the use by ROSE and CMISE (ISO/IEC ISP 11183-1:1992) 39pp
Specifies the association control service element, presentation layer and the session layer standards that shall be used to provide the required upper layer functions for the Common Management Information Service Element and the Remote Operation Service Element functions. This Standard is identical with and has been reproduced from ISO/IEC ISP 11183-1:1992. (IT-001)
AS 42421994 Earth-moving machinery and ancillary equipment for use in minesElectrical wiring systems at extra-low voltage 8pp
Sets out requirements for the design, installation, maintenance and servicing of electrical wiring systems of earthmoving machinery and ancillary equipment for use in opencut or underground mines. Relates to wiring systems of the automotive type operated at extra-low voltage. (EL-023)
25pp
Defines the various terms employed in the calculation of metered petroleum quantities, and specifies the equations that allow the values of correction factors to be computed. This Standard is identical with and reproduced from ISO 4267-2:1988. (ME-049)
AS 42431994 Additional requirements for enclosed switchgear and controlgear from 1 kV to 72.5 kV to be used in severe climatic conditions (IEC/TS 60932 Ed. 1.0 (Bilingual 1988)) 20pp
Applies to indoor enclosed high voltage switchgear and controlgear complying with Australian Standards AS 2086 and AS 2264, excluding gas-insulated metal-enclosed switchgear, intended to be used in severe conditions (with respect to condensation and pollution) more severe than the normal service conditions specified in these Standards. This Standard is identical with and reproduced from IEC 932:1988. (EL-007)
AS/NZS 4248.2:1994 CMISE/ROSE for AOM12Enhanced management communications (ISO/IEC ISP 11183-2:1992) 101pp
Specifies how the Common Management Information Service Element (CMISE) combined with the Remote Operations Service Element (ROSE) shall be used to provide a complete set of operation and notification services to the CMISE-service-users of two end systems. This Standard is identical with and has been reproduced from ISO/IEC ISP 11183-2:1992. (IT-001)
AS/NZS 4251 Electromagnetic compatibility (EMC)Generic emission standard AS/NZS 4251.1:1999 Residential, commercial and light industry (CISPR 61000-6-3 Ed. 1.0 (Bilingual 1996)) 6pp
Specifies limits and test methods for electrical and electronic equipment intended for use in residential, commercial and light industrial environments (excluding equipment used to radiate electromagnetic energy for radio communication purposes) for which no dedicated product or product family emission standard exists. The Standard is one of a series of standards applicable to electromagnetic compatibility. This Standard is identical with and has been reproduced from CISPR/IEC 61000-6-3:1996. (TE-003)
AS/NZS 4244:1994 Information technologyTelecommunications and information exchange between systems 26-pole interface connector mateability dimensions and contact number assignments (ISO/IEC 11569:1993) 8pp
Specifies the 26-pole connector, including dimensions and assignments to be used when the functional characteristics of the interface conform with V.24 and the electrical characteristics conform with V.10, V.11 or V.28. This Standard is identical with and has been reproduced from ISO/IEC 11569:1993. (IT-001)
AS/NZS 4248.3:1994 CMISE/ROSE for AOM11Basic management communications (ISO/IEC ISP 11183-3:1992) 79pp
Specifies how the Common Management Information Service Element (CMISE) combined with the Remote Operation Service Element (ROSE) shall be used to provide a basic subset of operation and notification services to the CMISE-service-users of two end systems. This Standard is identical with and has been reproduced from ISO/IEC ISP 11183-3:1992 (corrected and reprinted 1993). (IT-001)
AS/NZS 4251.2:1999 Industrial environments (IEC 61000-6-4 Ed. 1.0 (Bilingual 1997)) 6pp
Specifies emission requirements applying to electrical and electronic apparatus intended for use in the industrial locations (both indoor and outdoor, or in proximity to industrial power installations) for which no dedicated product or product-family emission Standard exists. Disturbances in the frequency range 0 Hz to 200 GHz are covered. The Standard is one of a series of Standards applicable to electromagnetic compatibility. This Standard is identical with and has been reproduced from IEC 61000-6-4:1997. (TE-003)
AS/NZS 4245:1994 Information technologyTelecommunications and information exchange between systems Open Systems InterconnectionTransport protocol identification mechanism (ISO/IEC 11570:1992) 5pp
Provides a protocol identification procedure that will allow transport entities to be implemented which can support both OSI and non-OSI protocols above the OSI network layer. This Standard is identical with and has been reproduced from ISO/IEC 11570:1992. (IT-001)
AS/NZS 4249:1994 Electrical safety practicesFilm, video and television sites 9pp
Specifies the requirements for safe working practices in the use of electrical equipment on film, video and television sites and the in-service testing of the equipment. It does not apply to theatre stages, concert locations or permanent television studios. (EL-039)
6pp
Specifies the requirements for the design, construction and performance of mailboxes in both commercial and residential applications. It is intended for use by regulatory authorities and all persons concerned with the manufacture, installation, maintenance and general requirements of mailboxes. (MS-057)
165
AS 42542002
AS 42542002 Ductwork for air-handling systems in buildings 90pp
Amendment 1 16 September 2002 Amendment 2 1 October 2004 Specifies the requirements for performance, materials, construction and installation of ductwork for air-handling systems in buildings. It applies to ductwork for air-handling systems designed in accordance with the requirements of AS 1668.1 and AS 1668.2. (ME-062)
AS/NZS 4256.4:1995 Unplasticized polyvinyl chloride (uPVC) wall cladding boards 6pp Available Superseded
Specifies requirements for uncoated, opaque, uPVC sheets extruded and formed into profiles for use with accessories as external wall cladding. (PL-022)
AS 4256.52006 Polycarbonate
44pp
6pp
Specifies requirements for transparent, translucent and opaque polycarbonate sheeting intended for use as roof or wall cladding. (PL-022)
Specifies the process for creating all forms of user documentation for software. These include printed documents (e.g. user manuals and reference cards), on-line documentation and help text. The Standard does not specifically address embedded systems, training materials or policy manuals. (IT-001)
6pp
Provides guidance for the selection of security seals for specific applications based on classifications which indicate security category, grade, type and class. Test methods to determine the seal class are included. (ME-069)
Specifies requirements for transparent, translucent and opaque polycarbonate sheeting intended for use as roof or wall cladding. (PL-022)
AS/NZS 4257 Plastic roof and wall cladding materials Methods of test AS/NZS 4257.0:1994 General introduction and list of methods 1p
Specifies a series of test methods for general purpose coated and uncoated, transparent, translucent and opaque sheets of flat, corrugated and other geometrical configurations intended for roof and wall cladding applications. (PL-022)
5pp
Provides guidance for the effective use of security seals including control procedures. (ME-069)
AS 4256 Plastic roof and wall cladding materials AS 4256.12006 General requirements 5pp
AS 42601997 High efficiency particulate air (HEPA) filters Classification, construction and performance 13pp
Specifies requirements for the classification, construction and performance testing of fully disposable high efficiency particulate air (HEPA) filters. It includes those filters known as ultra low penetration air (ULPA) filters but excludes medium efficiency particulate air filters (MEPA). An appendix provides requirements for structural strength testing. (ME-080)
Specifies general requirements for general purpose coated and uncoated, transparent, translucent and opaque sheets of flat, corrugated and other geometrical configurations intended for roof and wall cladding applications. (PL-022)
5pp
AS/NZS 4261:1994 Reusable containers for the collection of sharp items used in human and animal medical applications 10pp
Amendment 1 5 December 1997 Sets out requirements for reusable containers intended for the safe collection and transport of sharp items used in human and animal applications. Appendices include methods for determining handle integrity, impact resistance, integrity of the closure device and leakage, and resistance to penetration. (HE-009)
Specifies general requirements for general purpose coated and uncoated, transparent, translucent and opaque sheets of flat, corrugated and other geometrical configurations intended for roof and wall cladding applications. (PL-022)
AS/NZS 4256.2:1994 Unplasticized polyvinyl chloride (uPVC) building sheets 5pp Available Superseded
Specifies requirements for transparent, translucent and opaque, uncoated and coated uPVC sheets that are formed into profiles and are primarily intended for use as a roof cladding sheet. In certain circumstances, the same material may be used as a wall cladding sheet. (PL-022)
Specifies requirements for the protection of users of telecommunication equipment from overvoltages which may exist between a user environment and the telecommunication facilities in that environment. It does not apply to a carrier's network. (TE-020)
31pp
2pp
Sets out a method for determining the glass fibre content and the residual ash of glass fibre reinforced polyester building sheets. (PL-022)
Provides guidelines and specifies requirements for the protection from overvoltages and overcurrents of customer equipment connected over twisted pair to telecommunication networks. It is not intended for the protection of persons. (TE-020)
4pp
Amendment 1 5 October 1995 Sets out a method for determining impact resistance of plastic building sheets. (PL-022)
AS/NZS 4263:2003 Interactive voice response systemsUserinterfaceDual tone multi frequency (DTMF) signalling 21pp
This Standard specifies requirements for the design of the user interface in interactive voice response (IVR) telephone systems where the user input to the system is signalled by dual tone multi frequency (DTMF) tones. (IT-022)
AS/NZS 4256.3:1994 Glass fibre reinforced polyester (GRP) 7pp Available Superseded
Specifies requirements for general purpose translucent and opaque glass fibre reinforced polyester sheets of flat, corrugated and other geometrical configurations intended for roof and wall cladding materials. (PL-022)
AS/NZS 4257.7:1994 Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure 2pp
Sets out a method for determining colourfastness, light transmission and impact resistance of plastic building sheets following exposure to ultraviolet light. (PL-022)
AS 4264 Coal and cokeSampling AS 4264.11995 Higher rank coalSampling procedures 65pp
Sets out methods for the sampling of higher rank coal from moving streams and stationary situations, including stopped-belt sampling, for routine and special purposes, to provide samples for general analysis and for
5pp
This Standard is identical with and reproduced from ISO 4901:1985. (PL-022)
166
3pp
67pp
Specifies a method for determining the moisture content of reconstituted wood-based panels. (TM-005)
Sets out methods for the sampling of coke from moving streams and stationary situations, including stopped-belt sampling, for routine and special purposes, to provide samples for general analysis and for the determination of total moisture. Methods for the preparation of samples are also included. (MN-001)
3pp
Specifies a method for determining the moisture content of reconstituted wood-based panels. (TM-005)
AS/NZS 4266.10:2004 Wet bending strength after immersion in water at 70C or boiling temperature 5pp
Specifies three methods for determining the bending strength of particleboards and fibreboards after immersion in hot water, as follows: (a) Method A Immersion in water at 70C for 2 h. (b) Method B Immersion in water at boiling temperature for 2 h. (c) Method C Immersion in water at boiling temperature for 72 h. (TM-005)
4pp
Specifies a method for determining the density of test pieces of reconstituted wood-based panels. (TM-005)
4pp
Specifies a method for determining the density of test pieces of reconstituted wood-based panels. (TM-005)
AS/NZS 4266.10(Int):2001 Wet bending strength after immersion in water at 70C or boiling temperature 5pp Available Superseded (Expired 5 May 2003)
Amendment 1 8 January 2003 Specifies three methods for determining the bending strength of particleboards and fibreboards after immersion in hot water, as follows: (a) Method A Immersion in water at 70C for 2 h. (b) Method B Immersion in water at boiling temperature for 2 h. (c) Method C Immersion in water at boiling temperature for 72 h. (TM-005)
5pp
Amendment 1 3 February 2006 Specifies a method of determining the apparent modulus of elasticity and bending strength (modulus of rupture) of reconstituted wood-based panels in flatwise bending. (TM-005)
21pp
Specifies requirements for wheeled fire extinguishers in which the extinguishant can be expelled by either gas stored under pressure in the cylinder or by pressure of gas released from a compressed gas cylinder. This Standard refers to materials, methods of manufacture and performance of the extinguisher and any associated compressed gas container; and also to instructions and markings. (FP-003)
AS/NZS 4266.5(Int):2001 Modulus of elasticity in bending and bending strength Available Superseded (Expired 5 May 2003)
6pp
Amendment 1 8 January 2003 Specifies a method of determining the apparent modulus of elasticity and bending strength (modulus of rupture) of reconstituted wood-based panels in flatwise bending. (TM-005)
AS/NZS 4266 Reconstituted wood-based panelsMethods of test AS/NZS 4266.0:2004 General introduction and list of methods 3pp
(TM-005)
AS/NZS 4266.6:2004 Tensile strength perpendicular to the plane of the panel (internal bond strength) 4pp
Specifies a method for determining the resistance to tension perpendicular to the plane of the panel, i.e., internal bond strength of reconstituted wood-based panels. (TM-005)
AS/NZS 4266.11(Int):2001 Moisture resistance under cyclic test conditions 5pp Available Superseded (Expired 5 May 2003)
Specifies a method for determining the moisture resistance of reconstituted wood-based panels under cyclic test conditions. (TM-005)
3pp
AS/NZS 4266.0(Int):2001 General introduction and list of methods 2pp Available Superseded (Expired 5 May 2003)
(TM-005)
AS/NZS 4266.6(Int):2001 Tensile strength perpendicular to the plane of the panel (Internal bond strength) 4pp Available Superseded (Expired 5 May 2003)
Specifies a method for determining the resistance to tension perpendicular to the plane of the panel, i.e. internal bond strength of reconstituted wood-based panels. (TM-005)
Sets out a method for determining the absorption of water into the surface of reconstituted wood-based panels. (TM-005)
7pp
AS/NZS 4266.1(Int):2001 Sampling and cutting of test pieces Available Superseded (Expired 5 May 2003)
Specifies a method for assessing the surface soundness of coated and uncoated reconstituted wood-based panels. (TM-005)
AS/NZS 4266.13(Int):2001 Resistance to axial withdrawal of screws 5pp Available Superseded (Expired 5 May 2003)
Specifies a method for determining the resistance of particleboards and fibreboards, of thickness 15 mm and greater, to axial withdrawal of screws. (TM-005)
3pp
Specifies methods for the sampling and cutting of test pieces of reconstituted wood-based panels. (TM-005)
7pp
AS/NZS 4266.2:2004 Dimensions, squareness, flatness and edge straightness of whole panel 5pp
Specifies methods for measuring thickness, width, length, squareness, straightness and flatness of reconstituted wood-based panels. It applies to full size panels. (TM-005)
Specifies a method for assessing the surface soundness of coated and uncoated reconstituted wood-based panels. (TM-005)
AS/NZS 4266.14:2004 Dimensional changes associated with changes in relative humidity 5pp
Specifies a method for determining dimensional changes in reconstituted wood-based panels, due to climatic variations. (TM-005)
AS/NZS 4266.2(Int):2001 Dimensions, squareness, flatness and edge straightness 5pp Available Superseded (Expired 5 May 2003)
Specifies methods for measuring thickness, width, length, squareness, straightness and flatness of reconstituted wood-based panels. It applies to full size panels. (TM-005)
AS/NZS 4266.14(Int):2001 Dimensional changes associated with changes in relative humidity 5pp Available Superseded (Expired 5 May 2003)
Specifies a method for determining dimensional changes in reconstituted wood-based panels, due to climatic variations. (TM-005)
AS/NZS 4266.8(Int):2001 Swelling in thickness after immersion in water 3pp Available Superseded (Expired 5 May 2003)
Specifies a method for determining the swelling in thickness of reconstituted wood-based panels. (TM-005)
167
AS/NZS 4266.16:2004
AS/NZS 4266.16:2004 Formaldehyde emissionDesiccator method AS/NZS 4266.29:2004 Heat resistance of PVC films 8pp
complaints handling process, the actual complaints handling, and disputes. (MB-015)
2pp
Amendment 1 3 February 2006 Specifies a method for determining the quantity of formaldehyde emitted from particleboards and fibreboards. (TM-005)
Sets out a method for determining the heat resistance of PVC films overlaid on reconstituted wood-based panels. (TM-005)
AS/NZS 4266.16(Int):2001 Formaldehyde emissionDesiccator method Available Superseded (Expired 5 May 2003)
AS/NZS 4270 Geographic information systemsSpatial data transfer standard AS/NZS 4270.1:1995 Logical specifications (U.S. FIPS PUB 173.1:1992)
2pp
8pp
Sets out a method for determining the effect of moisture on the panel surface. It is applicable to reconstituted wood-based panels overlaid with a PVC film or a finished foil. (TM-005)
215pp
Amendment 1 25 October 2002 Specifies a method for determining the quantity of formaldehyde emitted from particleboards and fibreboards. (TM-005)
Specifies a structure and content for spatially referenced data in order to facilitate data transfer between dissimilar spatial database systems. This Standard is based on and has been reproduced from Part 1 of U.S. Federal Information Processing Standards Publication FIPS PUB 173.11992. (IT-004)
63pp
3pp
(TM-005)
8pp
Amendment 1 3 February 2006 Sets out a method for determining durability of veneer bonds. It is applicable to reconstituted wood-based panels overlaid with natural or reconstituted wood veneers. (TM-005)
Specifies the U.S. classification and definitions of entities and attributes for the spatial features identifed in a data transfer. Its use within Australia and New Zealand is restricted to data transfers with systems complying with the U.S. version of Spatial Data Transfer Standard entities and attributes. This Standard is identical with and has been reproduced from Part 2 of U.S. Federal Information Processing Standards Publication FIPS PUB 173.21992. (IT-004)
49pp
3pp
Specifies a method for determining the surface absorption of reconstituted wood-based panels. (TM-005)
2pp
Evaluates the degree of cure or hardness of the laminated surface. It is applicable to all low pressure overlaid reconstituted wood-based panels. (TM-005)
3pp
Provides a representation of a Spatial Standard file set in a standardized method enabling the file set to be exported to or imported from different media by general purpose software complying with ISO 8211. This Standard is identical with and has been reproduced from Part 3 of U.S. Federal Information Processing Standards Publication FIPS PUB 173.31992. (IT-004)
Specifies a method for determining the surface absorption of reconstituted wood-based panels. (TM-005)
45pp
3pp
Amendment 1 3 February 2006 Specifies a method for determining the porosity of the laminated surface. It is applicable to all low pressure overlaid reconstituted wood-based panels. (TM-005)
3pp
Specifies methods for measuring the thickness, length and width of test pieces of reconstituted wood-based panels. (TM-005)
Provides a limited subset to the specifications for data transfer contained in AS/NZS 4270, Parts 1 and 3. The topological vector profile supports only geographic vector data with geometry and topology. Includes an appendix which provides variations for Australia and New Zealand. This Standard is technically equivalent to and has been reproduced from FIPS PUB 173-1B 1994. (IT-004)
2pp
Sets out a method for assessing the permeability of the decorative surface to steam. It is applicable to all low pressure overlaid reconstituted wood-based panels. (TM-005)
AS/NZS 4266.35(Int):2001 Dimensions of test pieces Available Superseded (Expired 5 May 2003)
2pp
34pp
Specifies methods for measuring the thickness, length and width of test pieces of reconstituted wood-based panels. (TM-005)
2pp
Sets out a method for determining the resistance to cracking of melamine overlaid reconstituted woodbased panels. (TM-005)
AS 42671995 Pressure regulators for use with industrial compressed gas cylinders 15pp
Amendment 1 5 December 1995 Amendment 2 5 August 1998 Specifies requirements for a safe and proper design of a compressed gas regulator, together with the precautions that are necessary during the construction, operation and maintenance of compressed gas regulators. It takes into consideration the unique properties of oxygen and acetylene, and highlights the precautions necessary when the regulators are installed in the workplace. (ME-002)
Sets out a method for the design, conduct, assessment and certification tests for shorthand reporters in court, parliamentary and other fields, which require accurate transcription of the spoken word with minimal delay. The tests cover shorthand speed, English language and general knowledge. (MS-061)
2pp
Sets out a method for assessing the resistance of decorative surfaces to staining by common household materials. Applies to all low-pressure melamine overlaid reconstituted wood-based panels. (TM-005)
2pp
Sets out a method for determining the resistance of laminated panels to dry heat. It is intended to determine the suitability of decorative laminated sheets for use in kitchens where contact with moderate hot cooking utensils is to be expected. (TM-005)
AS/NZS 4268:2008 Radio equipment and systemsShort range devicesLimits and methods of measurement 29pp
Provides the minimum performance and methods of measurement for short range devices placed on the Australian market in accordance with the LIPD and Radio-controlled Models Class Licences or, short range devices placed on the New Zealand market in accordance with the General User Radio Licence. Test methods are generally referenced from various ETSI SRD standards and other sources. (RC-006)
AS/NZS 4274:1995 X-ray tube assemblies for medical diagnosis Characteristics of focal spots (IEC 60336 Ed. 3.0 (Bilingual 1993)) 31pp
Describes measuring methods and requirements for test arrangements to be applied to the focal spots in diagnostic Xray tube assemblies for medical use. This Standard is identical with and has been reproduced from IEC 336:1993. (HE-003)
5pp
Sets out a method for determining the impact resistance of decorative overlaid panels. (TM-005)
AS/NZS 4275 Methods of testing underground marking tape AS/NZS 4275.0:1995 General introduction and list of methods 1p
Sets out standard methods of testing for underground marking tapes. Includes test methods for elongation at break, tear resistance, impact resistance, chemical resistance, background discolouration and adhesion of print. (PL-030)
2pp
Sets out a method for determining the bond strength of PVC films overlaid onto reconstituted wood-based panels. (TM-005)
9pp
Specifies essential elements of an effective complaints handling process for both complainants and complaint recipients from inception to satisfaction or determination. Provides guidelines dealing with the implementation of the
168
3pp
Sets out a method for determining the elongation at break of underground marking tape. (PL-030)
3pp
Sets out a method for determining tear resistance of underground marking tape. (PL-030)
AS/NZS 4276.17.2:2000 Spores of sulfite-reducing anaerobes (clostridia) including Clostridium perfringensEstimation of most probable number (MPN) using the multiple tube dilution technique (ISO 6461) 9pp
Sets out a method for determining the most probable number (MPN) of spores of sulfite-reducing anaerobes (clostridia) including C.perfringens in water, using a multiple tube dilution technique, with a confirmation procedure for identifying C.perfringens. (FT-020)
3pp
Sets out a method for determining the impact resistance of underground marking tape by means of a falling dart. (PL-030)
AS/NZS 4276.7:2007 Escherichia coli and thermotolerant coliformsMembrane filtration method 7pp
Sets out a method, using membrane filtration, for enumerating Escherichia coli (E. coli) and thermotolerant coliforms in water other than packaged water. (FT-020)
2pp
Sets out a method for determining the chemical resistance of underground marking tape by immersion in diesel oil, sulfuric and hydrochloric acid, ammonium hydroxide, sodium nitrate and hydrogen sulfide. (PL-030)
2pp
Sets out a method for determining the change in background colour of underground marking tape following immersion in a test reagent as indicated in AS/NZS 4275.4 in comparison with the original tape. (PL-030)
1p
Sets out a method for determining the adhesion of print on underground marking tape following immersion in a test reagent as indicated in AS/NZS 4275.4. (PL-030)
5pp
Sets out a method, using a multiple tube dilution technique, for estimating the most probable number (MPN) of pseudomonads in water. (FT-020)
AS/NZS 4276.20:2003 Examination for coagulase positive staphylococci, including Staphylococcus aureus, by membrane filtration 10pp
Sets out a method for detecting coagulase positive staphylococci and Staphylococcus aureus (S.aureus) in water by the membrane filtration method. (FT-020)
4pp
Sets out a method, using membrane filtration, for enumerating pseudomonads in water. (FT-020)
AS 4276.212005 Examination for coliforms and Escherichia coliDetermination of most probable number (MPN) using enzyme hydrolysable substrates 10pp
Sets out the method for simultaneously detecting coliforms and E. coli in water using enzyme hydrolysable substrates using the multiple tube dilution or multiple well technique. (FT-020)
AS/NZS 4276.1:2007 General information and procedures (ISO 8199:2005, MOD) 38pp
Presents guidance for carrying out manipulations which are common to each technique for the microbiological examination of water, particularly the preparation of samples, culture media and apparatus. Also describes the various enumeration techniques available and the criteria for the choice of a particular technique. (FT-020)
AS/NZS 4276.22:2007 Packaged waterColiform bacteria and Escherichia coliMembrane filtration method (ISO 9308-1:2000, MOD) 12pp
Describes a reference method (Standard Test) for the detection and enumeration of Escherichia coli and coliform bacteria in water for human consumption. (FT-020)
AS 4276.141995 Salmonellae
8pp
Amendment 1 5 October 1995 Sets out a method for the detection of salmonellae in water. (FT-020)
AS/NZS 4277:1995 Text telecommunicationsUser interface requirementsFor Deaf people and people with hearing and speech disabilities 5pp
Amendment 1 5 October 1996 Specifies requirements for the design of the user interface for textphones for communicating with Deaf people and people with hearing and speech disabilities. (IT-020)
14pp
AS/NZS 4276.3.1:2007 Heterotrophic colony count methods Pour plate method using yeast extract agar (ISO 6222:1999) 4pp
Specifies a method for the enumeration of culturable micro-organisms in water by counting the colonies formed in a nutrient agar culture medium after aerobic incubation at 36C and 22C. (FT-020)
Sets out a method for detecting Vibrio cholerae in water using culture in enrichment broth and on selective agar media. (FT-020)
AS/NZS 4276.16:1999 Method 16: Bactericidal efficiency of water disinfecting tablets 8pp
Determines the bactericidal efficiency of disinfection tablets used to disinfect small quantities of water obtained from untreated water supplies or water of unknown qualities. (FT-020)
AS 42781995 A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA) (IEC/TR 61117 Ed. 1.0 (Bilingual 1992)) 4pp
Describes a method that may be used for partially typetested assemblies to prove compliance with the requirements of AS 3439.1 regarding short-circuit withstand strength. This Standard is identical with and has been reproduced from IEC 1117:1992. (EL-006)
AS/NZS 4276.3.2:2003 Heterotrophic colony count methods Plate count of water containing biocides 4pp
Sets out a method for estimating the number of colony-forming units (CFUs) in water using a pour plate technique and R2A Agar. (FT-020)
AS/NZS 4276.17.1:2000 Spores of sulfite-reducing anaerobes (clostridia) including Clostridium perfringensMembrane filtration method (ISO 6461) 8pp
Sets out a method for enumerating spores of sulfitereducing clostridia and C.perfringens in water, using membrane filtration, with a confirmation procedure for identifying C.perfringens. (FT-020)
AS/NZS 4280 406 MHz satellite distress beacons AS/NZS 4280.1:2003 Marine emergency position-indicating radio beacons (EPIRBs) (IEC 61097-2:2002, MOD) 40pp
Amendment 1 8 April 2005 Amendment 2 29 September 2006 Provides manufacturers, suppliers and testing facilities of 406 MHz satellite distress beacons with the minimum radiofrequency and environmental requirements and associated test methods to enable design and confirmation of compliance with Australia and New Zealand radio frequency spectrum and maritime regulatory requirements. (RC-004)
169
AS/NZS 4280.2:2003
AS/NZS 4280.2:2003 Personal locator beacons (PLBs) AS 42891995 Oxygen and acetylene gas reticulation systems 40pp
Amendment 1 5 June 1998 Specifies the requirements for the safe use and proper design of a gas reticulation system, together with precautions that are necessary during the construction, operation and maintenance of reticulation systems carrying both oxygen and acetylene gases. Highlights the precautions necessary when the end-use equipment is connected for operation in a closed workshop or open-site area. (ME-002)
16pp
33pp
Amendment 1 8 April 2005 Amendment 2 29 September 2006 Provides equipment designers, manufacturers, suppliers and testing facilities of 406 MHz satellite distress beacons, when employed as Personal Locator Beacons, with both the minimum radiofrequency and environmental requirements and associated test methods, to enable design and confirmation of compliance with Australia and New Zealand radiofrequency spectrum and maritime regulatory requirements. (RC-004)
Specifies technical requirements for rolling stock to be considered for inclusion in engineering and operating systems safety Standards forming part of a railway safety management system prepared in accordance with AS 4292.1. (ME-079)
AS/NZS 4281:2007 Radiocommunications requirements for cordless telephones operating in the 1.7 MHz and between 30 and 41 MHz frequency bands 10pp
To be read in conjunction with the requirements of the national telecommunications authority, as some criteria may be commonly required. (RC-006)
AS 4291 Mechanical properties of fasteners made of carbon steel and alloy steel AS 4291.12000 Bolts, screws and studs (ISO 898-1:1999)
26pp
Specifies materials, mechanical properties and marking requirements for steel bolts, screws and studs property clases from 3.6 to 12.9 with ISO metric coarse and fine pitch threads and diameters up to and including 39 mm. The property class system is explained and recommended test programs for acceptance are given.This Standard is identical with and has been reproduced from ISO 898-1:1999. (ME-029)
44pp
Specifies technical requirements for operational systems to be considered for engineering and operating systems safety Standards forming part of a railway safety management system prepared in accordance with AS 4292.1. (ME-079)
20pp
AS/NZS 4291.2:1995 Nuts with specified proof load values Coarse thread (ISO 898-2:1992) 16pp
Specifies materials, mechanical properties and marking requirements for steel nuts of property classes 4, 5, 6, 8, 9, 10 and 12 with ISO metric coarse pitch threads and diameters up to and including 39 mm. The property class system is explained and test methods for determination of mechanical properties are given. Identical with and reproduced from ISO 898-2:1992. (ME-029)
Specifies requirements for investigating railway safety occurrences including the setting of terms of reference, conduct of the investigation, the development of conclusions, the identification of safety actions, the presentation of reports, the management review of reports and the close-out of safety actions. (ME-079)
AS/NZS 4293:1995 International lamp coding system (ILCOS) (IEC 61231 TR2 Ed. 1.0 (1993)) 21pp Obsolescent
Specifies a general system of coding of lamps. This Standard is identical with and reproduced from IEC 1231:1993. (EL-041)
AS 4291.52000 Set screws and similar threaded fasteners not under tensile stresses (ISO 898-5:1998) 8pp
Specifies materials and mechanical properties for steel set screws and similar threaded fasteners not under tensile stresses of property classes 14H, 22H, 33H and 45H and with thread diameters from 1.6 mm up to and including 24 mm. The property class system is explained and test methods for the determination of mechanical properties are given. This Standard is identical with and has been reproduced from ISO 8985:1998. (ME-029)
AS 4294(Int)1995 AMPS receiver immunity to interfering signals employing amplitude modulation 6pp (Expired 5 July 1999)
Amendment 1 5 August 1997 Provides details for protection to an AMPS cellular mobile station receiver against the interfering effects of radiated signals employing amplitude modulation in the band immediately above the AMPS B mobile receiver band, between 890 MHz and 915 MHz. (TE-003)
31pp
Sets out methods of testing building facades for environmental loading including water penetration and air infiltration as well as structural tests. Optional tests include seismic testing, seal degradation and building maintenance unit (BMU) restraint. (BD-080)
AS 42852007 Skylights
22pp
Sets out requirements of product performance, safety, design, construction and maintenance, including installation requirements, test conditions and procedures. (BD-075)
AS 4291.72000 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm. (ISO 898-7:1992) 26pp
Specifies a test procedure for the determination of torsional strength and the minimum breaking torques of bolts and screws with nominal diameters 1 mm to 10 mm and with property classes 8.8 to 12.9. The test applies to bolts and screws with thread less than M3 for which no breaking and proof loads are indicated in AS/NZS 4291.1, as well as to short bolts and screws tensile test. This Standard is identical with and reproduced from ISO 898-7:1992. (ME-029)
AS/NZS 4295:2004 Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 29.7MHz to 1GHz 25pp
Amendment 1 29 September 2006 Applies to analogue speech (angle modulated) equipment operating in the VHF and UHF land mobile and fixed service radiofrequency bands in the range 29.7 MHz to 1 GHz that are not subject to spectrum licensing arrangements. (RC-006)
4pp
Specifies constructional, performance and servicing requirements for cloth towels which are dispensed for single use from a dispenser machine. Does not include requirements for the dispenser machine. (TX-022)
22pp
AS/NZS 4287:1995 Child carrier seats for pedal bicyclesSafety requirements 19pp
Specifies safety requirements for child carrier seats which may be attached to a bicycle other than a child's bicycle for the purpose of transporting as a passenger, a child having a body weight of not greater than 22 kg. (CS-010)
Specifies requirements for both metal and non-metal trunking and fittings to accommodate, protect and if required segregate cables in an electrical installation. Tests cover material requirements, cover retention, electrical characteristics and mechanical properties. (EL-004)
Specifies railway safety requirements including accountabilities to be included in a railway safety management system by any organization or other railway industry participant demonstrating its ability to work safely and which is committed to achieving continuous improvement to the organization's safety performance. (ME-079)
AS 42881999 Soft underlays for textile floor coverings 10pp Available Superseded
Specifies performance requirements for fibrous, nonfibrous and combination soft underlays, together with their classification for intended use/application. (TX-009)
38pp
Presents the objectives and principles of adaptable housing and provides guidelines on planning and design. Adaptable housing is the basis for the development of the accommodation needs of users of all ages and abilities by making provision for future building modifications at minimum cost and disruption to the inhabitants. Includes in Appendix A a checklist for certification of housing units as Adaptable house class A, B or C. (ME-064)
170
AS 43021995 (Reusable PDF) Form of formal instrument of agreement for design and construct contract 1p
Comprises the formal instrument of agreement for use with General conditions of contract for design and construct AS 43001995.
AS 43142005 FoundingPatterns, pattern equipment and coreboxes for the production of sand moulds and sand cores 23pp
Specifies the requirements for patterns, pattern equipment and coreboxes for the production of sand moulds and/or sand cores. (MT-001)
AS 4302 Supplement 11995 Form of formal instrument of agreement for design and construct contractPad of forms (Supplement to AS 43021995) 400pp
Comprises a convenient pad of tear-off forms of AS 4302 1995. (MB-010)
AS 43212001 Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings 34pp
Specifies requirements for factory-applied fusion-bonded medium-density polyethylene coatings for pipes and fittings, for protection against corrosion at operating temperatures between -40C and plus 50C. It is intended for use by specifiers, applicators, manufacturers and purchasers of steel water pipeline. (WS-009)
AS 43001995 (Reusable PDF) General conditions of contract for design and construct 66pp
Specifies general conditions of contract suitable for the design and construct project procurement method. The Standard provides for different variations of the design and construct contract, namely design development and construct, and design novate and construct. This Standard is part of the suite of contracts based on AS 21241992 General conditions of contract.
AS 43221995 Quality and performance of commercial electrical appliancesHot food storage and display equipment 9pp
Specifies the principal performance requirements of hot food storage devices and sets out procedures for determining heat-up times and operating temperatures. Also includes requirements and recommendations for the design, construction and markings, and for the information to be provided regarding guarantees. Specifically intended for commercial devices such as bains-marie and warming ovens, but also applicable to household devices. (EL-015)
AS 4300 Supplement 11995 General conditions of contract for design and constructAnnexure Part A (Supplement to AS 43001995) 200pp
Comprises a convenient pad of tear off forms of Annexure Part A which is to be completed and issued as part of the tender documents to the General conditions of contract for design and construct AS 43001995. (MB-010)
AS 43031995 (Reusable PDF) General conditions of subcontract for design and construct 86pp
Provides a set of compatible subcontract conditions for subcontracts where AS 43001995, General conditions of contract for design and construct is in use as the head contract between the main contractor and the principal. This Standard is part of the suite of contracts based on AS 2124 1992, General conditions of contract.
AS 4300 Supplement 21995 General conditions of contract for design and constructAnnexure Part B (Supplement to AS 43001995) 400pp
Comprises a convenient pad of tear off forms of Annexure Part B Deletions, Amendments and Additions to the General conditions of contract for design and construct AS 43001995. (MB-010)
16pp
AS 4300 Supplement 31995 General conditions of contract for design and constructAnnexure Part C (Supplement to AS 43001995) 400pp
Comprises a convenient pad of tear off forms of Annexure Part C Approved Form of Unconditional Undertaking (Clause 5.3) to the General conditions of contract for design and construct AS 43001995. (MB-010)
Amendment 1 11 October 2000 Applies to construct only projects of a simple nature. It is not suitable for projects of a complex or long-term nature or where a bill of quantities has been prepared. This Standard is not meant to be used as a short form of AS 21241992 as certain obligations and risks are dealt with differently due to the simple nature of the projects for which this form of Contract is intended. This Standard is part of the suite of contracts based on AS 21241992. (MB-010)
Amendment 1 5 December 1995 Sets out a method for the selection of sampling positions for obtaining representative samples of atmospheric discharges from stationary sources such as stacks, ducts or other similar outlets. (EV-007)
AS 4323.21995 Determination of total particulate matter Isokinetic manual samplingGravimetric method 17pp
Sets out an isokinetic manual gravimetric method for the determination of particulate matter emitted from stationary sources such as stacks, ducts or other similar outlets. The method provides a measure of both the concentration and mass flow rate of particulate matter passing through a stack or duct over the sampling period employed. (EV-007)
AS 4300 Supplement 41995 General conditions of contract for design and constructAnnexure Part D (Supplement to AS 43001995) 180pp
Comprises a convenient pad of tear off forms of Annexure Part D Deed of Novation (Clause 9.2(iii)) to the General conditions of contract for design and construct AS 4300 1995. (MB-010)
16pp
Applies to construct only projects of a simple nature. It is not suitable for projects of a complex or long-term nature or where a bill of quantities has been prepared. This Standard is not meant to be used as a short form of AS 21241992 as certain obligations and risks are dealt with differently due to the simple nature of the projects for which this form of Contract is intended. This Standard is part of the suite of contracts based on AS 21241992.
AS 4300 Supplement 51995 General conditions of contract for design and constructAnnexure Part E (Supplement to AS 43001995) 200pp
Comprises a convenient pad of tear off forms of Annexure Part E Deed of Novation (Clause 10) to the General conditions of contract for design and construct AS 43001995. (MB-010)
AS 4307 Rotating electrical machinesRepair and overhaul AS 4307.11995 Low voltage machines 25pp
AS 4324 Mobile equipment for continuous handling of bulk materials AS 4324.11995 General requirements for the design of steel structures 101pp
Specifies general requirements, design loads and specific requirements for structures of mobile equipment for continuous handling of bulk materials, including appliances and machines that are intended to carry out similar functions (e.g. excavators, stackers, reclaimers, ship loaders, ship unloaders). It is not intended that this Standard be applied to feeders, fixed conveyors, bucket elevators, storage structures with through flow of materials or intermittent operation bulk handling equipment (i.e. equipment that handles or excavates material on a cyclic basis, such as draglines and power shovels). However, it may be applied to parts of such equipment. (ME-043)
AS 43011995 General conditions of tendering and tender form for design and construct contract 2pp
(MB-010)
Specifies minimum requirements and gives procedural guidance for the rewinding and rebuilding of rotating electrical machines of 180 W to 400 kW with a rated voltage not exceeding 1000 V a.c. or 1500 V d.c. (EL-009)
AS 43011995 (Reusable PDF) General conditions of tendering and tender form for design and construct contract 2pp AS 4301 Supplement 11995 General conditions of tendering and tender form for design and construct contractPad of forms (Supplement to AS 43011995) 200pp
Comprises a convenient pad of tear off forms of AS 4301 1995. (MB-010)
AS/NZS 4308:2008 Procedures for specimen collection and the detection and quantitation of drugs of abuse in urine 30pp
Sets out procedures for specimen collection, screening, confirmation, quantitation and reporting of drugs in human urine as well as integrity testing of the specimen. This edition introduces the option of on-site screening. (CH-036)
AS 43102004 DN80 piston type vacuum interface valves for municipal sewer systems 28pp
Specifies requirements for DN80 piston-type vacuum interface valves for municipal sewer system. (WS-022)
AS 43021995 Form of formal instrument of agreement for design and construct contract 1p
Comprises the formal instrument of agreement for use with General conditions of contract for design and construct AS 43001995. (MB-010)
AS/NZS 4325 Compression and mechanical connectors for power cables with copper or aluminium conductors
171
AS/NZS 4325.1:1995
AS/NZS 4325.1:1995 Test methods and requirements (IEC 61238-1 Ed. 1.0 (Bilingual 1993)) 27pp
Amendment 1 5 May 1997 Provides test methods and requirements for two broad classes of connectors suitable for copper conductors of 10 mm2 and greater, and aluminium conductors of 16 mm2 and greater. Class A connectors are intended for circuits which can be subjected to short circuits of relatively high duration and intensity. Class B connectors are intended for situations in which overloads or short circuits are restricted by protective devices. This Standard is technically equivalent to and reproduced from IEC 1238-1:1993. (EL-004) 420. Types of steel flanges, their facings, dimensions, tolerances, threading, bolt sizes, flange face surface finish, marking, testing and inspection are specified. Guidance on pressure/temperature ratings for flanges of nominated materials are given in an Annex. This Standard is identical with and has been reproduced from ISO 7005-1:1992. (ME-001) supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 13864:1995. (IT-016)
34pp
Specifies international requirements for circular grey, malleable and ductile cast iron flanges in nominal pressure designations, PN 2.5 to PN 50. Types of flanges, their facings, dimensions, tolerances, bolt sizes, surface finish of faces, marking, testing, inspection and materials together with associated pressure/temperature ratings are specifed. This Standard is identical with and has been reproduced from ISO 7005-2:1988. (ME-001)
AS/NZS 4337:1997 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsCall transfer supplementary service (ISO/IEC 13865:1995) 43pp
Specifies the call transfer between three users and is applicable to various basic services supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 13865:1995. (IT-016)
AS/NZS 4331.3:1995 Copper alloy and composite flanges (ISO 7005-3:1988) 26pp
Specifies international requirements for circular copper alloy and composite flanges in nominal pressure designations, PN 10 to PN 50. Types of flanges, their facings, dimensions, tolerances, bolt sizes, flange face surface finish, marking, testing, inspection and materials are specified. Pressure/temperature ratings for flanges of nominated alloys are given. This Standard is identical with and has been reproduced from ISO 7005-3:1988. (ME-001)
AS/NZS 4338:1997 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsCall completion supplementary services (ISO/IEC 13866:1995) 68pp
Specifies the call completion features applicable to various basic services supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 13866:1995. (IT-016)
AS/NZS 4328:1997 Information technologyTelecommunications and information exchange between systems Private integrated services networkInterexchange signalling protocolPath replacement additional network feature (ISO/IEC 13874:1995) 35pp
Amendment 1 5 September 1997 Specifies the signalling protocol for the support of the path replacement additional network feature at the Q reference point between private integrated services network exchanges connected together within a private integrated services network. The Q reference point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and reproduced from ISO/IEC 13874:1995. (IT-016)
AS/NZS 4339:1997 Information technologyTelecommunications and information exchange between systems Private integrated services networkInterexchange signalling protocolCall transfer supplementary service (ISO/IEC 13869:1995) 60pp
Specifies the signalling protocol for the support of the call transfer supplementary service at the Q reference point between private integrated services network exchanges connected together within a private integrated services network. The Q reference point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 13869:1995. (IT-016)
AS 43331995 Dean and Stark apparatus (BS 756:1952, BS 756:1952/Amd.1:1953, BS 756:1952/Amd.2:1985) 15pp
Specifies apparatus used for the determination of water by the method of distillation with an immiscible fluid. (CH-001)
AS/NZS 4329:1997 Information technologyTelecommunications and information exchange between systems Private integrated services networkInterexchange signalling protocolName identification supplementary services (ISO/IEC 13868:1995) 24pp
Specifies the signalling protocol for the support of calling and connected name identification supplementary services at the Q reference point between private integrated services network exchanges connected together within a private integrated services network. The Q reference point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 13868:1995. (IT-016)
AS/NZS 4334:1995 Graphic symbols for use on medical electrical equipment (BS 7139:1989) 49pp
Amendment 1 5 September 1996 Provides the only readily available and comprehensive listing of symbols for use on medical electrical equipment for both safety and identification purposes. This Standard is identical with and has been reproduced from BS 7139:1989. (HE-003)
AS/NZS 4340:1997 Information technologyTelecommunications and information exchange between systems Private integrated services networkInterexchange signalling protocolCall completion supplementary services (ISO/IEC 13870:1995) 68pp
Specifies the signalling protocol for the support of the call completion supplementary service at the Q reference point between private integrated services network exchanges connected together within a private integrated services network. The Q reference point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with, and has been reproduced from, ISO/IEC 13870:1995. (IT-016)
AS/NZS 4330:2006 121.5 and 243.0 MHz emergency position indicating radio beacons (EPIRBs) including personal EPIRBs 13pp
To provide the essential requirements for 121.5 and 243.0 MHz emergency position indicating radio beacons (EPIRBS) including personal EPIRBS, this Standard includes both environmental and operational requirements and radio-frequency requirements for marine and aviation application beacons. The requirements are made up of specifications, and the methods of test for verification of those specifications, which are based on COSPASSARSAT and International Maritime Organization requirements. (RC-004)
AS/NZS 4335:1997 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsPath replacement additional network feature (ISO/IEC 13863:1995) 28pp
Specifies the path replacement additional network feature applicable to various basic services supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 13863:1995. (IT-016)
AS/NZS 4341:1997 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsCall diversion supplementary services (ISO/IEC 13872:1995) 80pp
Specifies the call diversion features applicable to various basic services supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 13872:1995. (IT-016)
AS/NZS 4331 Metallic flanges AS/NZS 4331.1:1995 Steel flanges (ISO 7005-1:1992)
79pp
AS/NZS 4336:1997 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsName identification supplementary services (ISO/IEC 13864:1995) 37pp
Specifies supplementary services for calling and connected name identification applicable to various basic services
Specifies international requirements for circular steel flanges in nominal pressure designations, PN 10 to PN
172
AS/NZS 4347.6:1995 Determining impact resistance (falling dart impact test) 4pp
Amendment 1 5 March 1998 Sets out the method of determining the impact resistance of flat sheet material. (BD-029)
AS 4350.21999 Determination of heavy minerals and free quartzHeavy liquid separation method 5pp
Sets out a method for the determination of the heavy mineral content and free quartz of samples of heavy mineral sand concentrates. (MN-004)
AS/NZS 4347.7:1995 Determination of thickness of bitumen coating and thickness or mass of metallic centre 2pp
Sets out the method for determining the thickness of bitumen coating and the thickness or mass of the metallic centre, for bitumen-coated damp-proof courses or flashings with metal centres. (BD-029)
AS 4351 BiodegradabilityOrganic compounds in an aqueous medium AS 4351.11996 Method for determining and reporting biodegradability 8pp
Provides information on the nature of biodegradability, the rationale of analytical test procedures, their applicability, interpretation of results obtained, definitions and other guidance to help in measuring aerobic biological biodegradation of organic compounds in an aqueous medium. (EV-013)
38pp
Specifies criteria for determining the hazard levels of various types of pressure equipment to AS/NZS1200. It also classifies fluids for use in pressure equipment. (ME-001)
AS/NZS 4344:2001 Motor vehiclesCargo restraint systems Transport chain and components 18pp
Specifies requirements for chain or associated components used in the transport industry for developing a cargo restraining system and sets out a method for determining the strength of transport chain and its components. (ME-048)
1p
Amendment 1 5 March 1998 Sets out a means of determining the thickness of polyethylene film. (BD-029)
AS 4351.21996 Determination by analysis of dissolved organic carbon (DOC) (ISO 7827:1994) 8pp
Sets out a method for the evaluation of the 'ready' biodegradability of organic compounds by aerobic microorganisms using a test medium. Measurement of the percentage removal of dissolved organic carbon at regular intervals allows evaluation of the biodegradability of the test compound. The method generally applies to compounds which are soluble, non-volatile and not inhibitory to the test microorganisms at the concentration chosen for the test. Technically equivalent to ISO 7827:1994. (EV-013)
AS/NZS 4345:2001 Motor vehiclesCargo restraint systems Transport fibre rope 15pp
Specifies requirements for rope made from synthetic textile fibre, for use in restraining cargo on vehicles. (ME-048)
AS/NZS 4347.10:1995 Determination of mass of desaturated base and percentage saturation 2pp
Sets out the method of determining the mass per unit area of desaturated fabric or felt base and the percentage saturation of bitumen-impregnated damp-proof courses or flashings with fabric or felt base. (BD-029)
AS/NZS 4346:1995 Guide to the installation in vehicles of mobile communication equipment intended for connection to a cellular mobile telecommunication service (CMTS) 24pp
Provides guidance for the safe and efficient installation of communication equipment such as mobile cellular telephones and mobile data equipment in vehicles. Does not cover temporary installations or installations in marine and aeronautical environments. Many of the requirements can also be applied to the installation of land mobile radio equipment. (RC-006)
AS/NZS 4348:1995 Water supplyDomestic type water treatment appliancesPerformance requirements 30pp
Specifies requirements for the testing of appliances for chemical reduction, microbiological treatment, and odour and chlorine reduction. (WS-027)
AS/NZS 4347 Damp-proof courses and flashingsMethods of test AS/NZS 4347.0:1995 General introduction, list of methods and test specimen requirements 2pp
Specifies the requirements for the quantity and size of the test specimens required in the AS/NZS 4347 suite of Standards. (BD-029)
Set out requirements for the inspections of buildings and associated works by a suitably qualified inspector regarding particular technical aspects of the property, including minimum requirements to facilitate inspections and reports that are satisfactory to both the client and inspector. (BD-085)
2pp
Sets out the method of determining the water permeability of damp-proof courses and flashings. (BD-029)
41pp
1p
Sets out the method of determining the pliability of the bitumen coatings of damp-proof courses and flashings with metal centres. (BD-029)
This Standard specifies the minimum acceptable requirements for visual inspection and reporting on the activity of timber pests excluding dry wood termites for both pre and post purchase timber pest reports on properties. It applies to all classes of buildings, as described in the Building Code of Australia. It is for use by pest controllers, prospective purchasers, property owners and managers, building surveyors/inspectors, building consultants, architects and others who provide services in this area. (BD-085)
AS 4351.51996 Determination by analysis of biochemical oxygen demand (closed bottle test) (ISO 10707:1994) 10pp
Sets out a method for the evaluation of the 'ready' biodegradability of organic compounds by aerobic microorganisms using a test medium. Determination of the biochemical oxygen demand at regular intervals allows evaluation of the biodegradability of the test compound. The method generally applies to compounds which are soluble in the test medium. Technically equivalent to ISO 10707:1994. (EV-013)
AS 4350 Heavy mineral sand concentratesPhysical testing AS 4350.12005 Size analysis 6pp
Specifies a method for determining the size distribution of free-flowing heavy mineral sands concentrates such as rutile, zircon, ilmenite and monazite. A method for calculating the American Foundrymens Society Grain Fineness Number (AFS) number is included in an Appendix. (MN-004)
AS 4351.61996 Guidance for the determination of biodegradability of poorly soluble organic compounds (ISO 10634:1995) 7pp
Provides guidance for the determination of the 'ready' biodegradability of poorly soluble organic compounds. Four techniques are provided for dispersing organic compounds which are not soluble enough to be analysed using the relevant test method in the normal manner. The techniques are applicable to the methods provided by AS 4351.3 and AS 4351.4. Identical with and reproduced from ISO 10634:1995. (EV-013)
173
AS 4351.71996
AS 4351.71996 Determination by semi-continuous activated sludge method (SCAS) (ISO 9887:1992) 9pp
Sets out a method for the evaluation of the 'inherent' biodegradability of organic compounds. The procedure involves the measurement of the dissolved organic carbon content of effluent from a semicontinuous activated sludge unit dosed with a known concentration of the test compound. Comparison of these results with the results obtained with effluent from a control unit allows evaluation of the 'inherent' biodegradability of the test compound. The method generally applies to compounds which are soluble in the test medium, non-volatile, not lost by foaming of the test medium and not inhibitory to the test microorganisms at the concentration chosen for the test. Technically equivalent to ISO 9887:1992. (EV-013) sion factor of the intensifier. This Standard is identical with and has been reproduced from IEC 1262-2:1994. (HE-003)
AS/NZS 4356.3:1996 Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3 Ed. 1.0 (Bilingual 1994)) 9pp
Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method of determining the luminance distribution and luminance non-uniformity of the intensifier. This Standard is identical with and has been reproduced from IEC 1262-3:1994. (HE-003)
AS/NZS 4358:1996 Medical diagnostic X-ray equipment Radiation conditions for use in the determination of characteristics (IEC 61267 Ed. 1.0 (Bilingual 1994)) 29pp
Specifies methods for identifying the most important characteristics of diagnostic X-ray equipment and the relevant associated test methods, so that the characteristics can be stated in a standardized way to facilitate comparison between devices. This Standard is identical with and reproduced from IEC 1267:1994. (HE-003)
AS/NZS 4356.4:1996 Determination of the image distortion (IEC 61262-4 Ed. 1.0 (Bilingual 1994)) 8pp
Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method of determining the image distortion of the intensifier. This Standard is identical with and has been reproduced from IEC 1262-4:1994. (HE-003)
AS 4359 Insulating refractory ceramic fibres AS 4359.11996 Bulk fibre and blankets 5pp
8pp
Sets out a method for the evaluation of the 'inherent' biodegradability of organic compounds. Determination of the percentage removal of dissolved organic carbon (DOC) or chemical oxygen demand (COD) at regular intervals allow evaluation of the 'inherent' biodegradability of the test compound. The method generally applies to compounds which are soluble in the test medium, non-volatile, not lost by foaming of the test medium and not inhibitory to the test microorganisms at the concentration chosen for the test. Technically equivalent to ISO 9888:1991. (EV-013)
AS/NZS 4356.5:1996 Determination of the detective quantum efficiency (IEC 61262-5 Ed. 1.0 (Bilingual 1994)) 14pp
Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method of determining the detective quantum efficiency of the intensifier. This Standard is identical with and has been reproduced from IEC 1262-5:1994. (HE-003)
Specifies requirements for the classification and designation of insulating refractory ceramic fibres in bulk and blanket form. Does not apply to 'glass', rockwool or mineral insulating materials. (MN-007)
AS 4359.21998 Board
4pp
Specifies requirements for the classification and designation of insulating refractory ceramic fibreboard. It does not apply to 'glass', rockwool or mineral insulating materials. (MN-007)
AS/NZS 4356.6:1996 Determination of the contrast ratio and veiling glare index (IEC 61262-6 Ed. 1.0 (Bilingual 1994)) 9pp
Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method of determining the contrast ratio and veiling glare index of the intensifier. This Standard is identical with and has been reproduced from IEC 1262-6:1994. (HE-003)
AS/NZS 4360/3806 Set Risk PLUS compliance Set AS/NZS 4360 SET Risk Management Set
165pp
AS/NZS 4360 COMPANION SET:2008 AS/NZS 4360 Companion Set AS/NZS 4360:2004 Risk management
282pp 28pp
AS/NZS 4354:1995 Medical electrical equipmentRadionuclide calibratorsParticular methods for describing performance (IEC 61303 Ed. 1.0 (Bilingual 1994)) 13pp
Specifies methods for identifying the most important characteristics of radionuclide calibrators and the relevant associated test methods, so that the characteristics can be stated in a standardized way to facilitate comparison between devices. This Standard is identical with and reproduced from IEC 1303:1994. (HE-003)
AS/NZS 4356.7:1996 Determination of the modulation transfer function (IEC 61262-7 Ed. 1.0 (Bilingual 1995)) 14pp
Describes a method of determining the modulation transfer functions of X-ray image intensifiers. It is identical with and has been reproduced from IEC 1262-7:1995. (HE-003)
Provides a generic guide for managing risk. It may be applied to a wide range of activities or operations of any public, private or community enterprise, or group. (OB-007)
AS/NZS 4357 Structural laminated veneer lumber AS/NZS 4357.0:2005 Specifications 18pp
Provides guidelines for the management of leadcontaining paint coatings on industrial structures. Methods for determining the presence of leadcontaining paint are proposed and guidance is given on appropriate maintenance strategies. (CH-003)
AS/NZS 4355:2006 Radiocommunications equipment used in the handphone and citizen band radio services operating at frequencies not exceeding 30 MHz 9pp
This Standard was prepared to specify the essential requirements and minimum standards for radiocommunications equipment intended to operate in the handphone and citizen band radio services at frequencies not exceeding 30 MHz. (RC-006)
Specifies requirements for the manufacture, structural characterization, and structural verification of laminated veneer lumber intended for structural applications, and sets out dimensional tolerances, moisture content, veneer and bond quality, and structural properties to be determined for structural LVL. Also specifies requirements for formaldehyde emission. (TM-008)
AS/NZS 4356 Medical electrical equipmentCharacteristics of electro-optical X-ray image intensifiers AS/NZS 4356.1:1996 Determination of the entrance field size (IEC 61262-1 Ed. 1.0 (Bilingual 1994)) 9pp
Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method of determining the entrance field size of the intensifier. This Standard is identical with and has been reproduced from IEC 1262-1:1994. (HE-003)
AS/NZS 4357.1:2005 Method of test for measurement of dimensions and shape 5pp
Specifies methods for the measurement of dimensions and shape for structural LVL. (TM-008)
AS 4362 High-voltage test techniques for low-voltage equipment AS 4362.11996 Definitions, test and procedure requirements (IEC 61180-1 Ed. 1.0 (Bilingual 1992)) 24pp
Applies to dielectric tests with direct, alternating and impulse voltage and test with impulse current on equipment having a rated voltage of not more than 1 kV a.c. or 1.5 kV d.c. Applies mainly to type testing. This Standard is identical with and has been reproduced from IEC 1180-1:1992. (EL-007)
AS/NZS 4356.2:1996 Determination of the conversion factor (IEC 61262-2 Ed. 1.0 (Bilingual 1994)) 9pp
Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method of determining the conver-
174
6pp
Applies to test equipment used for dielectric tests on low-voltage equipment with direct, alternating or impulse voltage and impulse current on equipment having a rated voltage of not more than 1 kV a.c. or 1.5 kV d.c. This Standard is identical with and reproduced from IEC 1180-2:1994. (EL-007)
Specifies requirements for manufacturing single-use packing gauze, which needs to be X-ray detectable, for use in surgical procedures. It applies to both sterile and non-sterile products. (MS-005)
AS/NZS 4380:2001 Motor vehiclesCargo restraint systems Transport webbing and components 18pp
Specifies requirements for webbing restraint systems for use in the transport industry. (ME-048)
3pp
AS/NZS 4364(Int):2007 TimberBond performance of structural adhesives 27pp (Expires 31 July 2009)
Provides requirements for bond performance of adhesives formed in structural finger-jointed timber and glulam products. (TM-004)
Specifies requirements for manufacturing absorbent wadding, including cotton wool balls and cotton wool rolls for use in surgical procedures. (MS-005)
AS/NZS 4364:1996 Adhesives, phenolic and aminoplastic for load-bearing timber structures: Classification and performance requirements (BS EN 301:1992, BS EN 302.1:1992, BS EN 302.2:1992, BS EN 302.3:1992, BS EN 302.4:1992) 28pp
Establishes a classification for phenolic and aminoplastic polycondensation adhesives according to their suitability for use for load-bearing timber structures in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the manufacture of loadbearing timber structures only. The performance requirements of this Standard apply to the adhesive only, not to the structure. Based on and technically equivalent to BS EN 301:1992 and BS EN 302 Parts 1 to 4:1992. (TM-004)
9pp
Amendment 1 5 March 1997 Specifies performance requirements for ceramic tableware which particularly relate to public health, including minimum requirements for the release of lead and cadmium. (CS-094)
AS/NZS 4382:1996 Preparation of function charts for control systems (IEC 60848 Cor Ed. 1.0 (1990), IEC 60848 Ed. 1.0 (Bilingual 1988)) 48pp
Provides rules and symbols for the preparation of descriptions of the function and behaviour of control systems by establishing an implementation-independent graphical representation. Provides a general process approach to describing control functions and may be applied to non-electrical systems. Method of representation is an industrial application of 'Petri nets'. This Standard is identical with and has been reproduced from IEC 848:1988, including Corrigendum (1990). (TE-013)
14pp
AS/NZS 4365:2002 Radiocommunications equipment used in the UHF citizen band radio service 15pp
Amendment 1 22 January 2007 Amendment 2 12 December 2008 Specifies essential requirements and minimum standards for radiocommunications equipment intended to operate in the citizen band radio service in Australia and New Zealand, on the UHF band. (RC-006)
Specifies methods for pruning of trees and provides guidance on correct and uniform practices intended for use on amenity trees. (EV-018)
AS/NZS 4374:1996 UltrasonicsHand-held probe Doppler foetal heartbeat detectorsPerformance requirements and methods of measurement and reporting (IEC 61266 Ed. 1.0 (Bilingual 1994)) 27pp
Amendment 1 5 January 1997 Specifies a series of tests, and the terminology for reporting these tests, to be carried out by manufacturers, enabling them to declare the characteristics of Doppler foetal heartbeat detectors on a common basis, thus allowing the purchaser to compare the performance of various models and chose that one which is best suited to their requirements. This Standard is identical with and has been reproduced from IEC 1266:1994. (HE-003)
AS/NZS 4383 Preparation of documents used in electrotechnology AS/NZS 4383.1:1996 General requirements (IEC 61082-1 Ed. 1.0 (Bilingual 1991), IEC 61082-1 Amd.1 Ed. 1.0 (Bilingual 1995)) 93pp
Provides general rules and guidelines for the preparation of documents used in electrotechnology. Contains a classification of documents, documentation principles, including the structure of documents, and general drawing rules on formats, layout, graphical symbols and simplification techniques. Numerous illustrative examples are provided. This Standard is identical with and has been reproduced from IEC 1082-1:1991 and IEC 1082-1:1991 Amendment 1:1995 (incorporates Corrigendum:1993). (TE-013)
AS/NZS 4366:1996 Information technologySoftware packages Quality requirements and testing (ISO/IEC 12119:1994) 16pp
Specifies quality requirements for software packages and instructions on how to test a software package against these requirements. The Standard particularly applies to third party testing and deals with software packages as offered and delivered. It does not deal with production processes. This Standard is identical with and has been reproduced from ISO/IEC 12119:1994. (IT-015)
AS/NZS 4375:1996 User-applied labels for use on syringes containing drugs used during anaesthesia 3pp
Sets out requirements for labels which the user attaches to drug-filled syringes so that the contents can be identified just before use during anaesthesia. Size, colour and pattern of the label and the typographic characteristics of the wording are dealt with. (HE-019)
AS 43672007 Radiocommunications equipment used in the inshore boating radio services band 12pp
Describes the essential requirements and minimum standards for operation of the radiocommunications aspects of all radiocommunication equipment used in the Inshore Boating Radio Service (IBRS). (RC-004)
43pp
AS/NZS 4378:1996 Characteristics and test conditions of radionuclide imaging devicesAnger type gamma cameras (IEC 60789 Ed. 2.0 (Bilingual 1992)) 16pp
Specifies a series of tests, and the terminology for reporting these tests, to be carried out by manufacturers and which enables them to declare the characteristics of gamma cameras on a common basis, thus allowing purchasers to compare the performance of various models and choose that one which is best suited to their requirements. This Standard is identical with and has been reproduced from IEC 789:1992. (HE-003)
AS/NZS 4383.2:1996 Function-oriented diagrams (IEC 61082-2 Ed. 1.0 (Bilingual 1993)) 76pp
Covers the layout and presentation of functionoriented diagrams, such as overview, function and circuit diagrams, which are used to highlight the functioning of a system and its circuitry. Provides rules for the layout of the diagrams, choice of symbols and different forms of representation. Includes systems for non-electrical circuits and processes. Contains numerous illustrations. This Standard is identical with and has been reproduced from IEC 1082-2:1993. (TE-013)
Sets out a recommended code of practice and symbols for use on plans for all surface and underground mines. Does not deal with drafting practices, for which reference is made to AS 1100.101 and AS 1100.401. (MN-001)
AS 4369 Surgical dressings AS 4369.11996 Single-use X-ray detectable abdominal sponges 4pp
Specifies requirements for manufacturing abdominal sponges which need to be X-ray detectable, for use in surgical procedures. It applies to both sterile and nonsterile products. (MS-005)
AS/NZS 4379 Information technologyOpen Systems InterconnectionRemote database access AS/NZS 4379.1:1996 Generic model, service and protocol (ISO/IEC 9579-1:1993) 161pp
Specifies a remote database access service in terms of the database server and the database processing services with respect to the remote database access client. This Standard is identical with and has been reproduced from ISO/IEC 9579-1:1993. (IT-001)
AS/NZS 4383.3:1996 Connection diagrams, tables and lists (IEC 61082-3 Ed. 1.0 (Bilingual 1993)) 20pp
Provides rules for connection diagrams which are used when assembling, installing or maintaining equipment. Numerous illustrations are provided. This Standard is identical with and has been reproduced from IEC 1082-3:1993. (TE-013)
AS/NZS 4383.4:1998 Location and installation documents (IEC 61082-4 Ed. 1.0 (Bilingual 1996)) 35pp
Provides rules for location and installation documents mainly used for installation work. It covers different systems and objects such as arrangement or installation drawings for site, buildings and equipment, installation drawings or diagrams for site or buildings, and drawings for location on or in components. This Stan-
59pp
Specifies a remote database access service in terms of the database server and the database processing ser-
175
AS/NZS 4384:1997
dard is identical with and has been reproduced from IEC 61082-4:1996. (TE-013)
AS/NZS 4384:1997 Motor vehiclesAnchorages and anchor points for securing internal cargo 14pp
Specifies requirements for anchorages for use in securing cargo in vehicles where the occupants share the same interior space as the cargo. (ME-048)
3pp
AS 4392 Heavy mineral sandsAnalysis by wavelength dispersive X-ray fluorescence spectrometry AS 4392.11996 Titaniferous mineral sands 56pp
Sets out the procedure for determining the ability of a hinged door to withstand wear and fatigue. (BD-089)
AS/NZS 4387.9:1996 Determination of resistance to downward static load on drawers and other runnersupported items 3pp
Sets out the procedure for determining the ability of a drawer or other runner-supported items to resist downward static load. (BD-089)
Amendment 1 5 November 1996 Amendment 2 5 April 1999 Sets out a wavelength dispersive X-ray fluorescence procedure for the determination of titanium, iron, aluminium, silicon, zirconium, manganese, vanadium, niobium, calcium, chromium, magnesium, sulfur, cerium, phosphorus, lanthanum, thorium, uranium, tin, arsenic and lead in titaniferous mineral sands. (MN-004)
AS/NZS 4386 Domestic kitchen assemblies AS/NZS 4386.1:1996 Kitchen units 37pp
47pp
Sets out a wavelength dispersive X-ray fluorescence procedure for the determination of zirconium, hafnium, silicon, aluminium, titanium, iron, phosphorus, calcium, lanthanum, cerium, thorium, uranium, arsenic and lead in zircon materials. (MN-004)
Specifies the minimum requirements for the construction, durability, safety, ergonomics, strength, coordination of services and choice of components of fitted kitchen assemblies for use in domestic applications. This Standard is also applicable to small offices, holiday apartments, units and similar non-commercial applications. It is designed for use by manufacturers, builders, consumers, specifiers and regulatory authorities. (BD-089)
24pp
Specifies the minimum requirements for the installation of fitted kitchen assemblies for use in domestic applications, whether delivered in pre-assembled or in flat-pack form. This Standard is also applicable to small offices, holiday apartments, units and similar non-commercial applications. It is designed for use by installers, manufacturers, builders, consumers, specifiers and regulatory authorities alike. (BD-089)
AS/NZS 4387.13:1996 Determination of wear and fatigue of drawers, sliding shelves and runners 3pp
Sets out the procedure for determining the ability of a drawer or sliding shelf assembly to withstand wear and fatigue. (BD-089)
AS/NZS 4394:1996 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis (IEC 60613 Ed. 2.0 (Bilingual 1989)) 12pp
Defines the most common operating characteristics of rotating anode X-ray tubes, during and after energization, to facilitate comparison between these devices. Identical with and has been reproduced from IEC 613:1989. (HE-003)
AS/NZS 4387 Domestic kitchen assembliesMethods of test AS/NZS 4387.0:1996 Introduction, list of methods and general requirements 3pp
Applies to determine the strength of an assembly unit by applying to various parts, loads that would be expected in reasonable use. (BD-089)
AS/NZS 4387.15:1996 Determination of the strength of support frames for wall attachment devices 2pp
Sets out the procedure for determining the strength of support frames for wall attachment devices used with kitchen wall units. (BD-089)
AS/NZS 4395 Information technologyKeyboard layouts for text and office systems AS/NZS 4395.1:1996 General principles governing keyboard layouts (ISO/IEC 9995-1:1994) 11pp
Specifies the spacing and physical characteristics of keys and the principles governing the placement of characters and symbols used on numeric, alphanumeric and composite keyboards. This Standard is identical with and has been reproduced from ISO/IEC 9995-1:1994. (IT-001)
2pp
Sets out the procedure for measuring shelf deflection of a loaded kitchen unit. (BD-089)
AS 43881996 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear (IEC 60890 Cor.1 TR3 Ed. 1.0 b (1988), IEC/TR 60890 Ed. 1.0 (Bilingual 1987), IEC/TR 60890 Amd.1 Ed. 1.0 (Bilingual 1995)) 26pp
Provides a method to determine the temperature rise inside a low-voltage switchgear and controlgear assembly by extrapolation from data found by tests on other assemblies. This Standard is identical with and has been reproduced from IEC 890:1987, including the Corrigendum:1988 and Amendment 1:1995. (EL-006)
7pp
Specifies the alphanumeric section of a keyboard, the arrangement, the location and the number of the keys in the alphanumeric zone. This Standard is identical with and has been reproduced from ISO/IEC 99952:1994. (IT-001)
AS/NZS 4387.4:1996 Determination of the strength of worktops and bottom surfaces 3pp
Sets out the procedure for determining the strength of worktops and bottom surfaces of kitchen units. (BD-089)
AS/NZS 4395.3:1996 Complementary layouts of the alphanumeric zone of the alphanumeric section (ISO/IEC 9995-3:1994) 5pp
Specifies a set of graphic characters which, when used in combination with an existing national version keyboard layout, allows the input of the full graphic character repertoire defined in AS 2793. This Standard is identical with and has been reproduced from ISO/IEC 9995-3:1994. (IT-001)
12pp
3pp
Sets out the procedure for determining the strength of hinged doors of a kitchen unit. (BD-089)
Specifes the minimum requirements for the design, construction, testing and installation of safety mesh for use in domestic, commercial and industrial building applications. (PL-022)
7pp
Specifies the numeric section, the arrangement, the number and the location of the keys in the various zones of the section. This Standard is identical with and has been reproduced from ISO/IEC 9995-4:1994. (IT-001)
7pp
Specifies the editing section, the cursor zone and the allocation of functions to its keys. This Standard is identical with and has been reproduced from ISO/IEC 9995-5:1994. (IT-001)
176
2pp
Specifies the function section of the keyboard and the allocation of functions to the keys. This Standard is identical with and has been reproduced from ISO/IEC 9995-6:1994. (IT-001)
3pp
Specifies the dimensions and mechanical properties of heattreated steel slotted pan head tapping screws in sizes from ST 2.2 to ST 9.5 inclusive. Identical with and has been reproduced from ISO 1481:1983. (ME-029)
AS/NZS 4404:1996 Slotted countersunk (flat) head tapping screws (common head style) (ISO 1482:1983)
AS/NZS 4414:1996 Ghost-cancelling reference signal for Australian and New Zealand PAL television broadcasting systems 11pp
Specifies a ghost-cancelling reference (GCR) signal that may be inserted into the transmitted television signal by broadcasters, and used by suitably equipped television receivers to eliminate, or at least reduce considerably, annoying ghost images often experienced in the analogue PAL systems in Australia and New Zealand. (CT-002)
3pp
AS/NZS 4395.8:1996 Allocation of letters to the keys of a numeric keypad (ISO/IEC 9995-8:1994) 3pp
Specifies the allocation of letters to the numeric zone and is intended for keyboards where letters instead of digits are used for mnemonic retention of numeric information. This Standard is identical with and has been reproduced from ISO/IEC 9995-8:1994. (IT-001)
Specifies the dimensions and mechanical properties of heattreated steel slotted (flat) head tapping screws in sizes from ST 2.2 to ST 9.5 inclusive. Identical with and has been reproduced from ISO 1482:1983. (ME-029)
AS/NZS 4405:1996 Slotted raised countersunk (oval) head tapping screws (common head style) (ISO 1483:1983) 3pp
Specifies the dimensions and mechanical properties of heattreated steel slotted raised (oval) head tapping screws in sizes from ST 2.2 to ST 9.5 inclusive. Identical with and has been reproduced from ISO 1483:1983. (ME-029)
AS/NZS 4415 Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bandsTechnical characteristics and methods of measurement AS/NZS 4415.1:2003 Shipborne equipment and limited coast stations (including DSC) (IEC 610977:1996, MOD) 45pp
Amendment 1 11 June 2004 Provides minimum requirements for VHF transmitters and receivers for use on board ships in the maritime mobile services. An annex sets out proposed variations to these requirements for application in Australia and New Zealand. This Standard is reproduced from IEC 61097-7:1996 and varied to suit Australain/New Zealand conditions. (RC-004)
AS/NZS 4406:1996 Cross recessed pan head tapping screws (INVALID ISO 7049:1983) 4pp
Specifies the dimensions and mechanical properties of heattreated steel cross recessed pan head tapping screws in sizes from ST 2.2 to ST 9.5 inclusive. Identical with and has been reproduced from ISO 7049:1983. (ME-029)
AS 43972007 Electroplated coatings of zinc on steel fasteners with imperial threads 31pp
Specifies the requirements for electroplated coatings of zinc, applied either by barrel plating or other techniques, on fasteners with imperial threads (the UNC, UNF, BSW and BSF). (MT-009)
AS/NZS 4407:1996 Cross recessed countersunk (flat) head tapping screws (common head style) (ISO 7050:1983) 4pp
Specifies the dimensions and mechanical properties of heattreated steel cross recessed countersunk (flat) head tapping screws (common head style) in sizes from ST 2.2 to ST 9.5 inclusive. Identical with and has been reproduced from ISO 7050:1983. (ME-029)
AS 4398 InsulatorsCeramic or glassStation post for indoor and outdoor useVoltages greater than 1000 V a.c. AS 4398.11996 Characteristics (IEC 60273 Ed. 3.0 (Bilingual 1990))
AS/NZS 4415.2:2003 Major coast stations, limited coast stations, ship stations and handheld stations (non DSC) (ETS 300 162:1998, MOD) 54pp
Amendment 1 11 June 2004 Specifies the minimum requirements for VHF transmitters and receivers and transceivers for major coastal stations and handheld stations in the maritime mobile service. This Standard is reproduced from ETS 300 162:1998 and varied to suit Australian/New Zealand conditions. (RC-004)
38pp
AS/NZS 4408:1996 Cross recessed raised countersunk (oval) head tapping screws (ISO 7051:1983) 4pp
Specifies the dimensions and mechanical properties of heattreated steel cross recessed countersunk (oval) head tapping screws in sizes from ST 2.2 to ST 9.5 inclusive. Identical with and has been reproduced from ISO 7051:1983. (ME-029)
Specifies requirements for the construction and performance of ceramic or glass station post insulators. It is to be read in conjunction with Part 2: Tests. It is based on and reproduced from IEC 273:1990 with the addition of an Appendix giving Australian variations. (EL-010)
AS/NZS 4417 Marking of electrical products to indicate compliance with regulations AS/NZS 4417.1:2000 General rules for use of the mark 8pp
4pp
Specifies the dimensions and mechanical properties of heattreated steel hexagon washer head tapping screws in sizes from ST 2.2 to ST 9.5 inclusive. Identical with and has been reproduced from ISO 7053:1992. (ME-029)
Provides general requirements for the use of a specified trademark (the Regulatory Compliance Mark) on electrical products to indicate compliance with regulations. Covers entitlement to use the mark and general requirements for use. (QR-012)
5pp
AS/NZS 4417.2:2001 Specific requirements for electrical safety regulatory applications 34pp
Amendment 1 4 January 2005 Provides general requirements for the use of the Regulatory Compliance Mark to indicate that a product complies with electrical safety regulations in Australia and New Zealand. Includes appendices giving lists of electrical regulators, regulatory definitions, applicable Standards and procedures for satisfying electrical safety regulatory requirements. (QR-012)
Specifies the dimensions and mechanical properties of heattreated steel hexagon flange head tapping screws in sizes from ST 2.2 to ST 9.5 inclusive. Identical with and has been reproduced from ISO 10509:1992. (ME-029)
2pp
Specifies the dimensions of the thread and thread ends for tapping screws with thread sizes from ST 1.5 to ST 9.5 inclusive. Identical with and has been reproduced from ISO 1478:1983. (ME-029)
AS/NZS 4417.3:1996 Specific requirements for electromagnetic compatibility regulatory applications 8pp
Provides specific requirements for the use of the Regulatory Compliance Mark to indicate that a product complies with electromagnetic compatibility regulations in Australia and New Zealand. (QR-012)
AS/NZS 4401:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildingsPolyethylene (PE) (ISO 8770:2003) 25pp
Specifies the requirements for solid-wall polyethylene (PE) pipes and fittings for soil and waste discharge (low and high temperature) inside buildings, as well as the system itself. It does not include buried pipework. (PL-006)
AS/NZS 4412:1996 Heat-treated steel tapping screwsMechanical properties (ISO 2702:1992) 2pp
Specifies the mechanical properties of heat-treated steel tapping screws with threads in accordance with AS/NZS 4411:1996 in sizes from ST 2.2 to ST 8 inclusive. Identical with and has been reproduced from ISO 2702:1992. (ME-029)
AS/NZS 4417.4:1999 Specific requirements for radio apparatus regulatory requirements 5pp
Provides specific requirements for the use of the Regulatory Compliance Mark to indicate that a piece of radio apparatus complies with the relevant radio apparatus regulations in Australia and New Zealand. (QR-012)
3pp
Specifies the dimensions and mechanical properties of heattreated steel hexagon head tapping screws in sizes from ST
177
AS 4418.11996
AS 4418 Supervisory control and data acquisition (SCADA)Generic telecommunications interface and protocol AS 4418.11996 General 4pp
critical fall height for a surface, that represents the upper limit of its effectiveness in reducing head injury when using playground equipment conforming to AS 1924, Parts 1 and 2 or NZS 5828, Parts 2 and 3. (CS-005)
13pp
8pp
Specifies the functional requirements and the performance criteria for the alarm investigation facility (AIF) used in fire detection, alarm, control and intercom systems. (FP-002)
Specifies the common functional requirements for SCADA networks, consistent with the IEC 870 series of International Standards. (EL-050)
48pp
Specifies requirements for the structural and functional design and construction of structures which cater for the interment of human remains. Such a structure may contain any number of crypt spaces and includes structures commonly known as mausoleums, vaults, lined graves and similar. (BD-071)
AS 44291999 Methods of test and rating requirements for smoke-spill fans 24pp
Amendment 1 17 June 2002 Specifies the classification of smoke-spill fans, and the laboratory test methods and procedures used to rate their performance (and that of their motors). Fans are rated in terms of their suitability to operate continuously without significant loss of performance, for a specified time at a specified air temperature. This Standard deals only with laboratory type-testing and does not consider the testing of smoke-spill fans after they have been installed in a building. (ME-013)
Specifies the telecommunications protocol structure for fire alarm systems (SCADA) networks, consistent with the AS 60870 series of Standards. (EL-050)
AS 44261997 Thermal insulation of pipework, ductwork and equipmentSelection, installation and finish 107pp
Deals with the selection, installation and finish of thermal insulation for pipework, ductwork, tanks, vessels, and equipment in the temperature range -75C to +800C, but excludes manufactured pre-insulated equipment, structural insulation of buildings and cold stores, fireproofing structures, refractory linings of plant, airborne installations and all external underground mains. (ME-077)
33pp
Specifies requirements for landscape and garden soils. This Standard specifies physical and chemical requirements such as bulk density organic matter, wettability, pH, dispersibility, toxicity, nitrogen drawdown index and permeability for low density, organic and natural soils or soil blends. Documentation requirements include information to be supplied to the consumer and health warnings. Guidance is given on the selection and use of soils. (CS-037)
AS 4430 Evaluation of devices, additives and processes which claim to improve vehicle performance AS 4430.12003 Engines designed for leaded petrol to operate on regular unleaded petrol 8pp
Specifies a test procedure and assessment criteria for evaluating claims that a device, additive or process can enable an engine system designed to operate on 97-98 RON leaded petrol to operate with comparable antiknock performance and/or durability to unleaded petrol (ULP) or premium unleaded petrol (PULP). (ME-020)
AS 44271996 Automotive repairsCode of practice for reconditioning reciprocating compression ignition engines 10pp
Specifies a code of practice for reconditioning or remanufacturing compression ignition, automotive and industrial engines. (CS-078)
AS 4420.11996 Test sample, preparation for tests, and test sequence 2pp
Specifies requirements for a test sample, the methods of its preparation for tests, and the test sequence. (BD-021)
AS 4428 Fire detection, warning, control and intercom systemsControl and indicating equipment AS 4428.01997 General requirements and test methods 30pp
Amendment 1 4 October 2002 Specifies the common requirements, the performance criteria and test methods for control and indicating equipment used in fire detection and alarm systems. (FP-002)
7pp
Specifies test procedures and performance requirements for evaluating claims that a device, additive or process can improve the performance of a spark ignition engine system. (ME-020)
2pp
Sets out a method for determining an aspect of the performance of windows designed for installation in all classes of buildings. (BD-021)
AS 4428.11998 Fire
AS/NZS 4431:1996 Guidelines for safe working on new lift installations in new constructions 44pp
Describes recommended safe working provisions and practices for those responsible for, and involved in, new lift installations in new constructions. (ME-004)
22pp
2pp
Sets out a method for determining an aspect of the performance of windows designed for installation in all classes of buildings. (BD-021)
Amendment 1 30 April 2004 Specifies the functional, safety and performance requirements for control and indicating equipment used as fire indicator panels in fire detection, warning, control and intercom systems. (FP-002)
2pp
8pp
AS/NZS 4432:1996 Radar transponders for marine search and rescue (SART)Operational and performance requirements and methods of test (IEC 61097-1 Ed. 1.0 (Bilingual 1992)) 15pp
Provides performance requirements and test methods for marine search and rescue radar transponders (SART) to ensure compliance with requirements for the 1974 international convention for Safety of Life at Sea (SOLAS) and Australia and New Zealand spectrum planning. It is identical with and has been reproduced from IEC 1097-1:1992. (RC-004)
Sets out a method for determining an aspect of the performance of windows designed for installation in all classes of buildings. (BD-021)
Specifies requirements for fire brigade panel integrated in control and indicating equipment or forming a separate unit. (FP-002)
2pp
Sets out a method for determining am aspect of the performance of windows designed for installation in all classes of buildings. (BD-021)
AS 4433 Guide to the sampling of particulate materials AS 4433.11997 Sampling procedures 57pp
2pp
Sets out a method for determining an aspect of the performance of windows designed for installation in all classes of buildings. (BD-021)
7pp
Amendment 1 4 October 2002 Specifies the functional, safety and performance requirements for power supply units used in fire protection systems. (FP-002)
17pp
Amendment 1 5 June 1999 Specifies the minimum requirements and provides further recommendations for the organization, staffing, operation and management of a company providing static or mobile guarding services, but does not include the requirements for licensed crowd controllers. It includes sections on company organization, staffing and documentation. An appendix provides the specific requirements for custodial and escort officers. (EL-031)
6pp
Sets out basic methods for the sampling of particulate materials from moving streams and stationary situations, including stopped-belt sampling, to provide samples for chemical analysis, physical testing and determination of moisture content. Provides information that could be relevant to materials for which no sampling standard exists. (MN-010)
Specifies the functional and performance requirements for the equipment used to signal status changes, of an automatic fire detection and alarm or suppression system, to a monitoring system. (FP-002)
29pp
Sets out methods for the preparation of samples collected in accordance with Part 1 of this Standard. Provides information that could be relevant to materials for which no sampling standard exists. (MN-010)
31pp
Sets out methods for checking and adjusting the precision of sampling of particulate materials, and checking the precision of subsequent sample preparation and measurement. (MN-010)
18pp
Sets out methods for checking mechanical sampling systems for bias, covering primary sampling of par-
178
AS/NZS 4445 Solar heatingDomestic water heating systems AS/NZS 4445.1:1997 Performance rating procedure using indoor test methods (ISO 9459-1:1993) 28pp
This Standard provides an indoor test method for rating solar domestic water heating for thermal performance under benchmark conditions. This Standard is identical with and reproduced from ISO 9459.1:1993. (CS-028)
45pp
Sets out basic methods for sampling particulate material that is mixed with a liquid, usually water, to form a slurry. (MN-010)
62pp
Amendment 1 5 April 1999 Specifies requirements, selection and evaluation criteria for height adjustable swivel chairs. The Standard is the first of a series to be developed under a memorandum of understanding between Standards Australia and the Australasian Furnishing Research and Development Institute Limited (AFRDI). (CS-088)
AS/NZS 4434 Medical electrical equipmentMedical electron accelerators AS/NZS 4434.1:1996 Functional performance characteristics (IEC 60976 Ed. 1.0 (Bilingual 1989)) 70pp
Specifies test procedures for the determination and disclosure of functional performance characteristics for electron accelerators to enable intending purchasers to compare performance of different models. It is identical with and has been reproduced from IEC 976:1989. (HE-003)
AS 4439 Wastes, sediments and contaminated soils AS 4439.11999 Preparation of leachatesPreliminary assessment 3pp
Sets out an outline for the preliminary assessment of the potential for liquid or solid waste, sediments, sludges and soils to contaminate groundwater. It deals with the preliminary procedure to determine whether the preparation of leachates, as set out in as AS 4439.2 and/or AS 4439.3, is necessary. This procedure is not applicable to encapsulated wastes which cannot be reduced in particle size without breaking the integrity of encapsulation. (CH-035)
AS/NZS 4447:1997 WoolIWTO Core Test Regulations (IWTO Core Test Regulations)
47pp
AS/NZS 4434.2:1996 Periodic function performance testing (IEC/TR 60977 Ed. 1.0 (Bilingual 1989)) 52pp
Takes the performance figures obtained in the first part of this Standard and applies them to a continuing in-service testing regime. It is identical with and has been reproduced from IEC 977:1989. (HE-003)
Amendment 1 5 November 1997 Amendment 2 5 August 1998 Amendment 3 5 March 1999 Sets out the IWTO regulations relating to the core sampling and testing of raw wool and to the issue of IWTO Test Certificates and IWTO Combined Certificates. (TX-012)
AS/NZS 4448:1997 Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles (CISPR 25 Ed. 1.0 (Bilingual 1995)) 43pp
Specifies limits and test methods to afford protection to radios and television receivers used on board vehicles from radio disturbance emissions originating in components intended for use in the vehicles. It is identical with and has been reproduced from IEC/CISPR 25:1995. (TE-003)
AS 4435 InsulatorsComposite for overhead power linesVoltages greater than 1000 V a.c. AS 4435.11996 Definitions, test methods and acceptance criteria for string insulator units (IEC 61109 Ed. 1.0 (Bilingual 1992), IEC 61109 Amd.1 Ed. 1.0 (Bilingual 1995)) 43pp
Specifies definitions, test methods and acceptance criteria for composite insulators for use on a.c. overhead lines. It is based on and reproduced from IEC 1109:1992 including Amendment No. 1:1994. It has an Appendix giving Australian variations. (EL-010)
AS/NZS 4449:1997 Information and documentationElectronic manuscript preparation and markup (ISO 12083:1994) 188pp
Describes four document type definitions and additional facilities conforming to AS 3514. It is identical with, and has been reproduced from, ISO 12083:1994. (IT-019)
AS/NZS 4450 Information and documentationBibliographic data element directory AS/NZS 4450.1:1997 Interloan applications (ISO 8459-1:1988)
AS/NZS 4435.2:1999 Standard strength classes and end fittings for string insulator units (IEC 61466-1 Ed. 1.0 (Bilingual 1997)) 20pp
Specifies values for the mechanical characteristics of composite string insulator units. This Standard defines the main dimensions of the couplings to be used on composite string insulator units to allow interchangeability of units or insulators supplied by different manufacturers and to allow, whenever practicable, interchangeability with existing installations. This Standard is based on but not equivalent to and has been reproduced from IEC 61466-1:1997. (EL-010)
22pp
AS/NZS 4441:2008 Oriented PVC (PVC-O) pipes for pressure applications (ISO 16422:2006) 35pp
Specifies the general aspects of pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for piping systems intended to be used underground or aboveground where not exposed to direct sunlight, for water mains and services, for pressurized sewer systems and for irrigation systems. (PL-021)
Specifies and describes the data elements required in the interchange of data between interlending institutions. It also identifies messages and their data elements, which are used in interloan transactions. This Standard is identical with, and has been reproduced from, ISO 8459-1:1988. (IT-019)
33pp
AS 4435.42005 Definitions, test methods, acceptance criteria for post insulator units (IEC 61952 Ed. 1.0 (Bilingual 2002)) 27pp
Specifies requirements and tests for composite line post insulators for use on overhead lines. (EL-010)
Specifies and describes the data elements required in the interchange of data between institutions involved in the acquisition of bibliographic materials. It also identifies messages and their data elements, which are used in the acquisitions process. This Standard is identical with, and has been reproduced from, ISO 84592:1992. (IT-019)
AS 44361996 Guide for the selection of insulators in respect of polluted conditions (IEC/TR 60815 Ed. 1.0 (Bilingual 1986)) 19pp
Provides guidance on the selection of insulators for use in polluted conditions. It is identical with and has been reproduced from IEC 815:1986. (EL-010)
36pp
Specifies requirements and selection and evaluation criteria for office desks. This Standard was developed under a memorandum of understanding between Standards Australia and the Australasian Furnishing Research and Development Institute Limited (AFRDI). (CS-088)
34pp
AS/NZS 4437:1996 Solderless crimped connectionsGeneral requirements, test methods and practical guidance (IEC 60352-2 Ed. 1.0 (Bilingual 1990)) 40pp
Specifies general requirements and methods of test for solderless crimped connections made with stranded wires
40pp
Specifies requirements and selection and evaluation criteria for office workstations. This Standard was developed under a memorandum of understanding between Standards Australia and the Australasian Furnishing Research and Development Institute Limited (AFRDI). (CS-088)
Specifies and describes the data elements required in the interchange of data between information retrieval systems (i.e. terminal-to-computer or computer-tocomputer). It also identifies messages and their data elements, which are used in information retrieval. This Standard is identical with, and has been reproduced from, ISO 8459-3:1994. (IT-019)
61pp
Establishes the data elements required to facilitate the interchange of data between circulation systems in the
179
AS/NZS 4450.5:2003
information and documentation industries. This Standard is identical with and has been reproduced from ISO 8459-4:1998. (IT-019)
7pp
3pp
AS/NZS 4450.5:2003 Data elements for the exchange of cataloguing and metadata (ISO 8459-5:2002) 72pp
Specifies and describes data elements required in the interchange of data between cataloguing systems and identifies messages and their data elements which are used in cataloguing systems. (IT-019)
Amendment 1 5 July 1998 Specifies the requirements for the design and performance of protective trousers and leggings (chaps) for users of hand-held chainsaws. (SF-004)
Amendment 1 16 August 2004 Sets out the method for determining the potential of masonry units, segmental pavers and flags to effloresce. (BD-026)
AS 4451 Small craftSteering systems AS 4451.11997 Wire rope and pulley systems for sailing craft (ISO 8847:1987) 3pp
Specifies the requirements for the construction, installation and performance of wire rope and pulley steering systems for sailing craft, with or without an auxiliary engine. This Standard is identical with and has been reproduced from ISO 8847:1987. (CS-001)
AS/NZS 4456.8:2003 Determining moisture content, dry density and ambient density 5pp
Amendment 1 16 August 2004 Sets out the method for determining moisture content, dry density and ambient density of masonry units, segmental pavers and flags. (BD-026)
16pp
9pp
Specifies the requirements for the construction, installation and performance of remote push-pull cable steering systems for small craft with single and twin outboard motor installations of over 15 kW power. This Standard is identical with and has been reproduced from ISO 8848:1990. (CS-001)
Specifies requirements for commercially manufactured segmental pavers of up to 0.1 sq/m face area and masonry units for walling. Includes masonry units and segmental pavers made from autoclaved aerated concrete, calcium, silicate, concrete, dimension stone and fired clay. (BD-026)
7pp
Amendment 1 16 August 2004 Sets out the method for determining the abrasion resistance of dry segmental pavers and flags when subjected to the impact and rolling action of steel ball bearings. (BD-026)
AS/NZS 4455 Masonry units, pavers, flags and segmental retaining wall units AS/NZS 4455.1:2008 Masonry units 19pp
AS 4451.31997 Remote systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990) 9pp
Specifies the requirements for the construction, installation and performance of remote push-pull cable steering systems for small craft with single outboard motor installations of 15 kW to 40 kW power. This Standard is identical with and has been reproduced from ISO 9775:1990. (CS-001)
Sets out requirements for masonry units used for walls built in accordance with AS 3700 and NZS 4230. (BD-026)
15pp
Sets out requirements for segmental retaining wall units, to facilitate design and purchasing. (BD-026)
AS 4451.41997 Hydraulic steering systems for craft up to 24 m hull length (ISO 10592:1994) 8pp
Specifies the requirements for the construction, installation and performance of hydraulic steering systems for small craft up to 24 m hull length. This Standard is identical with and has been reproduced from ISO 10592:1994. (CS-001)
AS/NZS 4456 Masonry units and segmental pavers and flagsMethods of test AS/NZS 4456.0:2003 General introduction and list of methods 4pp
Amendment 1 16 August 2004 Describes test methods into the following categories: (a) Tests that relate to minimum performance requirements; and (b) Tests that are optional and intended to be specified as appropriate. (BD-026)
4pp
Amendment 1 16 August 2004 Sets out methods of sampling masonry units, segmental pavers and flags for testing of a lot, for the test methods given in AS/NZS 4456.2 to AS/NZS 4456.19 inclusive. (BD-026)
AS/NZS 4453 Protective clothing for users of hand-held chainsaws AS/NZS 4453.1:1997 Test rig for testing resistance to cutting by a chainsaw (EN 381-1:1993) 8pp
Specifies the requirements for a test rig for testing protective clothing for users of hand-held chainsaws for resistance to cutting by a chainsaw. This Standard is identical with and has been reproduced from EN 3811:1993. (SF-004)
4pp
Amendment 1 16 August 2004 Sets out methods for measuring the dimensions of masonry units, segmental pavers and flags. (BD-026)
4pp
5pp
Specifies the requirements for testing protective legwear for users of hand-held chainsaws for dimensional change, protective coverage and resistance to cutting by a chainsaw. This Standard is identical with and has been reproduced from EN 381-2:1995. (SF-004)
AS/NZS 4456.5:2003 Determining the breaking load of segmental pavers and flags 4pp
Amendment 1 16 August 2004 Sets out the method for determining the breaking load of segmental pavers and flags. (BD-026)
Amendment 1 16 August 2004 Sets out a method for determining the permeability to water of masonry units. (BD-026)
180
AS 4459.71999 Determination of resistance to surface abrasion for glazed tiles (ISO 10545-7:1996) 9pp
This Standard is technically equivalent to and has been reproduced from ISO 10545-7:1996. (BD-044)
veloped by a technical subcommittee of the Standing Committee on Agriculture and Resource Management (SCARM) under the Agriculture and Resource Management Council of Australia and New Zealand (ARMCANZ). It is also known as SCARM Report 57. (FT-021)
3pp
AS 44652006 Construction of premises and hygienic production of poultry meat for human consumption 45pp
Describes the construction and equipment of all processing premises where poultry are slaughtered for the production of poultry meat for human consumption. (FT-021)
Amendment 1 16 August 2004 Sets out a method for determining the degree of bow of flags. (BD-026)
AS 4457 Earth-moving machineryOff-the-road wheels, rims and tyresMaintenance and repair AS 4457.12007 Wheel assemblies and rim assemblies 20pp
Sets out requirements for the identification, safe demounting, inspection, maintenance, testing and mounting of off-the-road wheel and rim assemblies for rubber-tyred earth-moving machinery. (ME-063)
AS 44652001 Construction of premises and hygienic production of poultry meat for human consumption 48pp Available Superseded
Amendment 1 28 August 2003 Sets out requirements for the construction of premises and hygienic production of poultry meat for human consumption. This Standard was developed by a technical subcommittee of the Standing Committee on Agriculture and Resource Management (SCARM) under the Agriculture and Resource Management Council of Australia and New Zealand (ARMCANZ). It is also known as SCARM Report No 75. (FT-021)
AS 4457.22008 Tyres
23pp
Sets out requirements for the inspection, retreading, repair and maintenance of off-the-road tyres fitted to wheel assemblies or rim assemblies of not less than 600 mm nominal diameter. (ME-063)
AS 4459.111997 Determination of crazing resistance for glazed tiles (ISO 10545-11:1994) 3pp
Defines procedures for determination of crazing resistance for glazed tiles. Identical to and reproduced from ISO 10545-11:1994. (BD-044)
93pp
Amendment 1 5 December 1999 Sets out requirements for the manufacture of pressure equipment as specified in the application Standards AS 1210, AS 1228 and AS 4041. Fabrication, heat treatment, forged construction, cast construction and testing are covered. (ME-001)
5pp
AS 4459 Methods of sampling and testing ceramic tiles AS 4459.11999 Sampling and basis for acceptance (ISO 10545-1:1995)
This Standard is technically equivalent to and has been reproduced from ISO 10545-12:1995 including Technical Corrigendum 1:1997. (BD-044)
6pp
This Standard is identical with and has been reproduced from ISO 10545-1:1995. (BD-044)
AS 4459.21999 Determination of dimensions and surface quality (ISO 10545-2:1995, ISO 10545-2:1995/Cor 1:1997) 9pp
This Standard is identical with and has been reproduced from ISO 10545-2:1995 including Technical Corrigendum 1:1997. (BD-044)
AS 4459.141999 Determination of resistance to stains (ISO 10545-14:1995, ISO 1054514:1995/Cor 1:1997) 7pp
This Standard is technically equivalent to and has been reproduced from ISO 10545-14:1995 including Technical Corrigendum 1:1997. (BD-044)
AS 4459.31999 Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:1995, ISO 10545-3:1995/Cor 1:1997) 4pp
This Standard is technically equivalent to and has been reproduced from ISO 10545-3:1995 including Technical Corrigendum 1:1997. (BD-044)
AS 4459.151999 Determination of lead and cadmium given off by glazed tiles (ISO 10545-15:1995) 3pp
This Standard is identical with and has been reproduced from ISO 10545-15:1995. (BD-044)
AS/NZS 4471:1997 Information technologyOpen Systems InterconnectionNetwork layer security protocol (ISO/IEC 11577:1995) 108pp
Specifies a protocol to be used by end systems and intermediate systems in order to provide security service in the network layer of the OSI 7-layer model, and is identical to and reproduced from ISO/IEC 11577:1995. (IT-001)
AS 4459.41997 Determination of modulus of rupture and breaking strength (ISO 10545-4:1994) 4pp
Defines procedures for determination of modulus of rupture and breaking strength. Identical to and reproduced from ISO 10545-4:1994. (BD-044)
AS 44642007 Hygienic production of wild game meat for human consumption 59pp
Sets out requirements for hygienic production and transportation of wild game meat for human consumption. This Standard was developed by the Meat Standards Committee (MSC) of the Food Regulation Standing Committee (FRSC) under the Australian and New Zealand Food Regulation Ministerial Council (ANZFRMC). It is also known as FRSC Technical Report No. 2 which was published as AS 44642007 by CSIRO PUBLISHING. (FT-021)
AS/NZS 4472:1997 Information technologyCoded representation of picture and audio information Progressive bi-level image compression (ISO/IEC 11544:1993, ISO/IEC 11544:1993/Cor 1:1995) 72pp
Specifies a coding method having progressive, progressivecompatible sequential and single-progression sequential modes. Also suggests a method to obtain any needed lowresolution renditions and is identical with and has been reproduced from ISO/IEC 11544:1993 including ISO/IEC 11544:1993/Corr.1:1995. (IT-029)
AS 4459.51999 Determination of impact resistance by measurement of coefficient of restitution (ISO 10545-5:1996, ISO 10545-5:1996/Cor 1:1997) 8pp
This Standard is technically equivalent to and has been reproduced from ISO 10545-5:1996 including Technical Corrigendum 1:1997. (BD-044)
AS 4459.61999 Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:1995) 5pp
This Standard is technically equivalent to and has been reproduced from ISO 10545-6:1995. (BD-044)
AS 44641998 Hygienic production of game meat for human consumption Available Superseded
Sets out requirements for the production of human consumption of products derived from wild animals and birds killed in their natural environment. This Standard was de-
AS/NZS 4473 Information technologyDigital compression and coding of continuous-tone still images AS/NZS 4473.1:1997 Requirements and guidelines (ISO/IEC 10918-1:1994)
182pp
Specifies a process for converting and unconverting source image data to compressed image data. The
181
AS/NZS 4474.1:2007
source image consists of continuous-tone still digital data and is identical with and is reproduced from ISO/IEC 10918-1:1994. (IT-029)
cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc extracted from soil by digestion with aqua regia. (EV-009)
AS/NZS 4474 Performance of household electrical appliancesRefrigerating appliances AS/NZS 4474.1:2007 Energy consumption and performance 144pp
Amendment 1 31 October 2008 Provides test laboratories with test methods and minimum performance requirements so that the performance, including energy consumption, of household refrigerating appliances can be measured, compared and evaluated (EL-015)
AS 4480 Textiles for health care facilities and institutionsMedical sheepskins AS 4480.11998 Product specification and testing 15pp
Specifies requirements for tanned sheepskins and lambskins to be used to minimize the incidence, severity and duration of pressure ulcers. (TX-015)
AS/NZS 4476:1997 AcousticsOctave-band and fractionaloctave-band-filters (IEC 61260 Ed. 1.0 (Bilingual 1995))
24pp
Specifies performance requirements and methods for testing the performance of analogue, sampled-data and digital implementations of band-pass filters that comprise a filter set or spectrum analyser. Performance requirements are provided for three filter classes. It is identical with and has been reproduced from IEC 1260:1995. (AV-002)
AS 4482 Guide to the investigation and sampling of sites with potentially contaminated soil AS 4482.12005 Non-volatile and semi-volatile compounds
AS/NZS 4474.2:2001 Energy labelling and minimum energy standard requirements 37pp
Amendment 1 16 April 2004 Amendment 2 16 December 2004 Amendment 3 4 January 2005 Amendment 4 10 August 2007 Specifies current energy labelling and minimum energy performance standard (MEPS) requirements together with new requirements to be introduced from 1 October 2004, for electric mains powered refrigerating appliances of the vapour compression type intended for household and similar use. Transitional aspects of regulation are addressed. (EL-015)
AS/NZS 4477:1997 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsIdentification supplementary services (ISO/IEC 14136:1995) 28pp
Specifies identification supplementary services applicable to various basic services supported by private integrated service networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 14136:1995. (IT-016)
58pp
Provides guidance for the collection of sufficient and reliable information for the assessment of a site potentially contaminated by non-volatile and semi-volatile compounds. It includes the formulation of data quality objectives and design of a sampling plan to meet the objectives of the investigation. (EV-009)
21pp
AS/NZS 4478:1997 Guide to the reprocessing of reusable containers for the collection of sharp items used in human and animal clinical/medical applications 2pp
Provides guidelines for the emptying, cleaning and disinfection of reusable containers utilized in the collection of sharp items used in human and animal clinical/medical applications. (HE-009)
Sets out guidance for collecting sufficient and reliable information for the assessment of a potentially contaminated site. This document should be used in conjunction with the appropriate Australian Standards for assessing the pollution of air and groundwater. The Standard does not prescribe levels of contaminants which are considered to pose a risk to human health or the environment. Such levels are prescribed in documents such as the criteria produced by ANZECC/NHMRC or various regulatory authorities. (EV-009)
AS/NZS 4475 Restraint systems for motor vehicles Performance tests AS/NZS 4475.0:1997 Introduction and list of methods 1p
AS 44842004 Gas cylinders for industrial, scientific, medical and refrigerant useLabelling and colour coding 19pp
Specifies means for identification of cylinders of water capacity 0.1kg to 150kg used for industrial, medical and refrigerant compressed gases. (ME-002)
AS 4479 Analysis of soils AS 4479.11997 Pretreatment of potentially contaminated soil samples for heavy metal and metalloid analysis 7pp
Specifies procedures for drying, crushing, sieving, dividing and milling of soil samples prior to chemical analysis. (EV-009)
Provides additional methods for testing various attributes of motor vehicle occupant restraint systems such as child restraint systems and wheelchair occupant restraint assemblies over and above the essential health and safety requirements specified in AS/NZS 2596 Seat belt assemblies for motor vehicles. (CS-075)
AS 4485 Security for health care facilities AS 4485.11997 General requirements 14pp
AS 4479.21997 Extraction of heavy metals and metalloids from soil by aqua regiaHotplate digestion method 7pp
Specifies a method for the extraction of heavy metals and metalloids from soil using aqua regia. Analytical techniques appropriate to the analyte content in the soil are used for the subsequent determination of heavy metals and metalloids in the resulting solution. (EV-009)
Sets out the policy, principles and common procedures necessary to establish and maintain an effective security service for health care facilities. (HT-008)
72pp
AS/NZS 4475.2:1997 Determination of webbing durability in withdrawing and retracting duty through a sash guide 4pp
Sets out the method for determining the durability of seat belt webbing passing through a sash guide system under simulated withdrawing and retracting operations. (CS-075)
Provides guidance for the development and implementation of the policy, principles and procedures necessary to establish and maintain an effective security service for health care facilities. (HT-008)
AS/NZS 4486 Playgrounds and playground equipment AS/NZS 4486.1:1997 Development, installation, inspection, maintenance and operation 24pp
Specifies requirements for the development, installation, inspection, maintenance and operation of playgrounds and playground equipment to ensure a continuing level of function and safety. It also contains requirements for information to be supplied by the manufacturer. (CS-005)
AS 4479.31999 Determination of metals in aqua regia extracts of soil by flame atomic absorption spectrometry 7pp
Sets out a flame atomic absorption spectrometric method for the determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc extracted from soil by digestion with aqua regia. (EV-009)
2pp
Sets out the method for determining the forces required to draw webbing through an adjustment device to increase or decrease the size of fitment of a restraint assembly. (CS-075)
AS 4479.41999 Determination of metals in aqua regia extracts of soil by inductively coupled plasma-atomic emission spectrometry 7pp
Sets out an inductively coupled plasma-atomic emission spectrometric method for the determination of
182
14pp
Amendment 1 5 February 1999 Specifies requirements for materials and hardware for industrial rope access systems including fall protection. (SF-015)
Specifies requirements for roundslings made of synthetic fibre that are intended for lifting purposes. It does not apply to slings that have been repaired. Guidance on information that should be supplied with enquiries and orders is given in an appendix. (ME-025)
14pp
15pp
Specifies requirements and sets out recommendations for the selection, safe use and maintenance of industrial rope access system components and assemblies. (SF-015)
Sets out recommended practices for the care and use of roundslings, but does not consider repairs to the load-bearing core of roundslings or the use of roundslings for the lifting of personnel. (ME-025)
AS 4489 Test methods for limes and limestones AS 4489.01997 General introduction and list of methods 4pp
(BD-027)
AS/NZS 4492 WoolFleece testing and measurement AS/NZS 4492.0:2000 Introduction and list of methods 2pp
AS/NZS 4499 Protective headgear for cricket AS/NZS 4499.1:1997 Helmets 6pp
Sets out the procedures required to measure mean fibre diameter of wool samples. (TX-012)
AS/NZS 4492.1:2000 Weighing and sampling greasy wool for fleece testing and measurement 6pp
Sets out a procedure for weighing individual fleeces and for obtaining a representative sample of greasy wool from an individual sheep. (TX-012)
4pp
Specifies requirements for helmets used in cricket to mitigate the effects of a blow to the head by a cricket ball. Includes construction, strength of retention system and its attachment points, impact energy attenuation, and labelling requirements. Helmets complying with this Standard are not intended to protect wearers against a severe blow from a cricket bat. (CS-095)
Sets out the method for the determination of the fineness of hydrated lime. (BD-027)
AS/NZS 4492.2:2000 Determination of washing yield and clean fleece weight 15pp
Sets out procedures for determining the washing yield of a sample taken from a greasy fleece, and the clean fleece weight of the fleece from which that sample was drawn. (TX-012)
6pp
5pp
Sets out a method that allows the determination of not only the rate at which lime slakes and the reactivity (in the sense of heat output) but also what material will not slake and remains gritty. (BD-027)
AS 4489.4.11997 SoundnessPat
5pp
AS/NZS 4492.3:2000 Measurement of mean fibre diameter using Airflow and Sonic A instruments 17pp
Sets out a procedure for obtaining the mean fibre diameter of a sample of fleece wool. (TX-012)
Specifies requirements for temple protectors to be attached to cricket helmets to mitigate the effects of a blow to the side of the head by a cricket ball. Includes construction, testing and labelling requirements. Temple protectors complying with this Standard are not intended to protect wearers against a severe blow from a cricket bat. (CS-095)
Sets out the method for determining the soundness of pats for popping, pitting and expansion cracks that form in lime putty and finished lime. (BD-027)
6pp
4pp
Sets out the method for determining the average expansion for three specimens from a mortar of hydrated lime, portland cement, sand and water. (BD-027)
AS/NZS 4492.4:2000 Measurement of mean fibre diameter and determination of fibre diameter distribution using SIROLAN-LASERSCAN measuring system 5pp
Sets out a procedure for obtaining the mean and distribution of fibre diameter in a sample of fleece wool. (TX-012)
Specifies requirements for faceguards to be attached to cricket helmets to mitigate the effects of a blow to the face by a cricket ball. Includes construction, testing and labelling requirements. Faceguards complying with this Standard are not intended to protect wearers against a severe blow from a cricket bat. (CS-095)
AS 4489.4.31997 SoundnessAutoclave
20pp
6pp
Sets out the method for determining the expansion of portland cement due to lime pastes. (BD-027)
AS/NZS 4492.5:2000 Measurement of mean fibre diameter using the OFDA measuring system 7pp
Sets out a procedure for obtaining the mean fibre diameter, and in some cases the fibre diameter distribution, of a sample of fleece wool. (TX-012)
AS/NZS 4494:1998 Discharge of commercial and industrial liquid waste to sewerGeneral performance requirements 3pp
Specifies the general performance requirements for discharge of liquid, commercial and industrial liquid waste to sewer. (WS-030)
Sets out a three-phased approach to implementing an AS/NZS ISO 9000 quality system. The Clauses of AS/NZS ISO 9001 (and AS/NZS ISO 9002) are distributed across three modules. Phase I is achieved by implementing the Clauses contained in any one module; Phase II, the Clauses contained in any two modules. Phase III, achieved when all three modules are implemented, gives a complete AS/NZS ISO 9000 quality system. Contains advice on the risks associated with the phases approach and gives guidance on auditing of a phased quality system. (QR-008)
AS/NZS 4501 Set:2008 Occupational protective clothing Set AS/NZS 4501 Occupational protective clothing
56pp
3pp
(BD-027)
AS/NZS 4495:1997 Radiotherapy equipmentCoordinates, movements and scales (IEC 61217 Ed. 1.0 (Bilingual 1996))
61pp
AS/NZS 4501.1:2008 Guidelines on the selection, use, care and maintenance of protective clothing (CEN/TR 15321:2006) 17pp
Adopts CEN/TR 15321 to set out guidance for the selection, use, care and maintenance of clothing designed to provide protection to the wearer. (SF-004)
2pp
Describes the method for determining free moisture in hydrated lime. (BD-027)
Defines a consistent set of coordinate systems for use throughout the process of teleradiotherapy, to enable equipment to be re-aligned with a previously treated site. The Standard is identical with and has been reproduced from IEC 1217:1996. (HE-003)
4pp
Describes a method for the determination of the content of dry hydrated lime solids as a percentage of the wet mass of a milk of lime suspension. (BD-027)
AS/NZS 4496:1997 Recommended practice for the colour coding of steel products 18pp
Gives a recommended practice for the colour coding of steel products of various wrought forms and alloy designations for identification purposes. Also includes a colourcoding system to indicate product thickness. An appendix gives details of colour formulations. (MT-001)
19pp
Adopts EN 340:2003 which specifies general performance requirements for ergonomics, innocuousness, size designation, ageing, compatibility and marking of protective clothing and the information to be supplied by the manufacturer with protective clothing. (SF-004)
AS/NZS 4502 Methods for evaluating clothing for protection against heat and fire
183
AS/NZS 4502.1:2006
AS/NZS 4502.1:2006 Evaluation of thermal behaviour of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) 11pp
Adopts ISO 6942:2002 to specify two complementary methods (method A and method B) for determining the behaviour of materials for heat protective clothing subjected to heat radiation. (SF-004)
3pp
Sets out a method for determining the performance of domestic garage doors designed for installation in domestic buildings. (BD-014)
AS/NZS 4512:1999 UltrasonicsSurgical systemsMeasurement and declaration of the basic output characteristics (IEC 61847 Ed. 1.0 E (1998)) 27pp
Specifies the essential non-thermal output characteristics of ultrasonic surgical units, methods of measurement of these output characteristics, those characteristics which should be declared by the manufacturers of such equipment. This Standard is identical with and has been reproduced from IEC 61847:1998. (HE-003)
4pp
AS/NZS 4502.2:1997 Evaluation of heat transmission of materials and material assemblies when exposed to flame (ISO 9151:1995) 9pp
Sets out a method for determining the behaviour of protective clothing or its constituents when exposed to flame. This Standard is identical with and reproduced from ISO 9151:1995. (SF-004)
Sets out the method to be applied when testing domestic garage doors, as defined in AS/NZS 4505, for durability. (BD-014)
11pp
Specifies requirements for the design, construction, performance and installation of domestic garage doors. Also specifies the resultant loads on structures onto which such garage doors are mounted. An appendix gives an example of a typical marking for the garage door or for the garage door packaging. (BD-014)
AS/NZS 4513:1995 Medical electrical equipmentFundamental aspects of safety Standards (IEC/TR 60513 Ed. 2.0 (Bilingual 1994)) 56pp
Identifies fundamental considerations to be taken into account in developing Standards to ensure the safety of medical electrical equipment. It also provides a guide to the strategies and methodologies used in developing the IEC 601 and AS/NZS 3200 series of Standards. It is identical with and reproduced from IEC 513:1994. (HE-003)
AS/NZS 4502.3:1997 Evaluation of the behaviour of materials and material assemblies when exposed to small splashes of molten metal (ISO 9150:1988) 8pp
Sets out a method for determining the resistance of materials used in the manufacture of protective clothing to small splashes of molten metal. This Standard is identical with and reproduced from ISO 9150:1988. (SF-004)
AS 45142006 Abrasive productsChecking the grit size of superabrasives (ISO 6106:2005) 10pp
Adopts ISO 6106:2005 to specify means for determining the grain size distribution of grits of diamond or cubic boron nitride in the range 41 g to 1180 g as used in the manufacture of grinding wheels and saws. (ME-033)
AS/NZS 4502.4:1997 Evaluation of the behaviour of materials and material assemblies when exposed to heavy splashes of molten metal (ISO 9185:1990) 9pp
Sets out a method for determining the resistance of materials used in the manufacture of protective clothing to molten metal splash. This Standard is identical with and reproduced from ISO 9185:1990. (SF-004)
AS 45081999 Thermal resistance of insulation for ductwork used in building airconditioning 14pp
Amendment 1 29 November 2000 Specifies requirements relating to the optimum thermal resistance of insulation for rigid and flexible ductwork and associated fittings used in heating, airconditioning and evaporative cooling systems of buildings and dwellings. (ME-077)
AS 45152006 Superabrasive productsRotating grinding tools with diamond or cubic boron nitride General survey, designation and multilingual nomenclature (ISO 6104:2005) 11pp
Adopts ISO 6104:2005 to specify general details, designation and nomenclature for diamond and cubic boron nitride grinding wheels and saws. (ME-033)
AS/NZS 4502.5:1997 Evaluation of the contact heat transmission through material and material assemblies (ISO 12127:1996) 5pp
Sets out a method for determining the contact heat transmission of protective clothing or its constituents in the range of 100C to 500C. This Standard is identical with and reproduced from ISO 12127:1996. (SF-004)
AS/NZS 4516:1998 Abrasive productsDiamond or cubic boron nitride grinding wheelsDimensions (ISO 6168:1980) 15pp
Specifies the minimum dimensional requirements for diamond or cubic boron nitride grinding wheels. This Standard is identical with and has been reproduced from ISO 6168:1980. (ME-033)
AS/NZS 4503 Protective clothingProtection against liquid chemicals AS/NZS 4503.2:1997 Test method: Determination of resistance to penetration by a jet of liquid (Jet test) (EN 463:1994) 3pp
Sets out a method for determining the resistance of materials or their constituents used in the manufacture of protective clothing to penetration by a jet of water. This Standard is identical with and reproduced from European (CEN) Standard EN 463:1994. (SF-004)
Amendment 1 2 February 2000 Sets out safety requirements for stand-alone power systems used for the supply of extra-low and low voltage power, with energy storage at extra-low voltage. (EL-042)
AS 4517 Blanks for superabrasive cutting-off wheels AS 4517.12006 Manually guided cutting-off in building and civil engineering (ISO 6105-1:2004) 7pp
Adopts ISO 6105-1:2004 to specify dimensions for saw blade blanks for manually-guided cutting-off machines. (ME-033)
101pp
Provides guidelines for the design of stand-alone power systems with energy storage at extra-low voltage and used for the supply of extra-low and/or low voltage electric power in a domestic situation. (EL-042)
12pp
AS/NZS 4503.3:1997 Test method: Determination of resistance to penetration by spray (Spray Test) (EN 468:1994) 4pp
Sets out a method for determining the resistance of materials used in the manufacture of protective clothing to penetration by a spray of water. This Standard is identical with and reproduced from European (CEN) Standard EN 468:1994. (SF-004)
Amendment 1 2 February 2000 Sets out installation and maintenance requirements for stand-alone power systems used for the supply of extra-low and low voltage power, with energy storage at extra-low voltage. (EL-042)
AS 4517.22006 Hand-held cutting-off in building and civil engineering (ISO 6105-2:2004) 4pp
Adopts ISO 6105-2:2004 to specify dimensions for saw blade blanks for hand-held cutting-off machines. (ME-033)
AS/NZS 4510:1999 Isolated electrical supply systems for medical use 8pp
Specifies requirements for the design, construction and testing of isolated electrical supplies for medical use. The Standard does not apply to electrical power supplies incorporated within equipment. (HT-021)
AS/NZS 4518 Bonded abrasivesDetermination and designation of grain size distribution AS/NZS 4518.1:1997 Macrogrits F4 to F220 (ISO 8486-1:1996)
AS/NZS 4504 Domestic garage doorsMethods of test AS/NZS 4504.0:1998 Introduction and list of methods AS/NZS 4504.1:1998 Test sample and preparation of wind pressure test 1p
(BD-014)
5pp
AS/NZS 4511:1999 UltrasonicsPressure pulse lithotripters Characteristics of fields (IEC 61846 Ed. 1.0 E (1998)) 22pp
Specifies measureable parameters for the declaration of the acoustics output of extracorporeal lithotripsy equipment and methods of measurement and characterization of the pressure field generated by lithotripsy equipment. This Standard is identical with and has been reproduced from IEC 61846:1998. (HE-003)
Specifies means for determining the grain size distribution of macrogrits of diamond or cubic boron nitride in the range of F4 to F220 as used in the manufacture of grinding wheels and saws. This Standard is identical with and has been reproduced from ISO 84861:1996. (ME-033)
1p
Specifies requirements for test sample and the methods of preparation for test. (BD-014)
25pp
Specifies means for determining the grain size distribution of microgrits of fused aluminium oxide and silicon carbide in the range of F230 to F1200 as used in the manufacture of grinding wheels and saws. This Standard is identical with and has been reproduced from ISO 8486-2:1996. (ME-033)
184
2pp
Specifies a method for the sampling and splitting of a lot of abrasive grains intended for use in the manufacture of grinding wheels and saws. This Standard is identical with and has been reproduced from ISO 9138:1993. (ME-033)
4pp
Adopts ISO603-11:1999 to specify the nominal dimensions for hand finishing sticks. (ME-033)
AS 4524 Bonded abrasive productsDimensions AS 4524.12005 Grinding wheels for external cylindrical grinding between centres (ISO 603-1:1999) 16pp
Adopts ISO603-1:1999 to specify the nominal dimensions for grinding wheels for external cylindrical grinding between centres. (ME-033)
AS 4524.122005 Grinding wheels for deburring and fettling on a straight grinder (ISO 603-12:1999) 6pp
Adopts ISO603-12:1999 to specify the nominal dimensions grinding wheels for deburring and fettling on a straight grinder. (ME-033)
AS/NZS 4537:1999 Medical electrical equipmentDosimeters with ionization chambers as used in radiotherapy (IEC 60731 Ed. 2.0 (Bilingual 1997)) 88pp
Sets out performance requirements of radiotherapy dosimeters which measure air kerma, absorbed dose, or the corresponding rates, in photon and electron radiation. The Standard is technically equivalent to and is reproduced from IEC 60731:1997 and includes a ZZ Appendix with one variation for Australia and New Zealand. (HE-003)
AS 4524.132005 Grinding wheels for deburring and fettling on a vertical grinder (ISO 603-13:1999) 5pp
Adopts ISO603-13:1999 to specify the nominal dimensions for grinding wheels for deburring and fettling on a vertical grinder. (ME-033)
AS 4524.22005 Grinding wheels for centreless external cylindrical grinding (ISO 603-2:1999) 5pp
Adopts ISO603-2:1999 to specify the nominal dimensions for grinding wheels for centreless external cylindrical grinding. (ME-033)
AS 4524.142005 Grinding wheels for deburring and fettling/snagging on an angle grinder (ISO 603-14:1999) 6pp
Adopts ISO603-14:1999 to specify the nominal dimensions for grinding wheels for deburring and fettling/snagging on an angle grinder. (ME-033)
AS 4524.32005 Grinding wheels for internal cylindrical grinding (ISO 603-3:1999) 5pp
Adopts ISO603-3:1999 to specify the nominal dimensions for grinding wheels for internal cylindrical grinding. (ME-033)
AS 4524.152005 Grinding wheels for cutting-off on stationary or mobile cutting-off machines (ISO 603-15:1999) 6pp
Adopts ISO603-15:1999 to specify the nominal dimensions for grinding wheels for cutting-off on stationary or mobile cutting-off machines. (ME-033)
Sets out a procedure for the sampling of alumina from moving streams, including stopped-belt sampling, to provide samples for chemical analysis, physical testing and determination of moisture content. The procedure is not applicable to the sampling of alumina from fluidized streams, which presents particular sampling problems. (MN-009)
6pp
Sets out the methods for the sample preparation of smelter-grade alumina. The methods are suitable for dry, free-flowing aluminas. (MN-009)
16pp
Adopts ISO603-4:1999 to specify the nominal dimensions for grinding wheels for surface grinding/peripheral grinding. (ME-033)
AS 4524.162005 Grinding wheels for cutting-off on hand held power tools (ISO 603-16:1999) 5pp
Adopts ISO603-16:1999 to specify the nominal dimensions for grinding wheels for cutting-off on hand held power tools. (ME-033)
AS 4539 Information technologyPublic Key Authentication Framework (PKAF) related Standards AS 4539.1.12002 GeneralPKAF architecture 18pp
AS 4524.52005 Grinding wheels for surface grinding/face grinding (ISO 603-5:1999) 13pp
Adopts ISO603-5:1999 to specify the nominal dimensions for grinding wheels for surface/grinding/face grinding. (ME-033)
Describes the architecture to provide a scheme where a digital signature (with an associated public/private key pair) will be linked to a particular distinguished name by a chain of public key certificates. (IT-012)
AS 4539.1.2.12001 GeneralX.509 Certificate and Certificate Revocation Lists (CRL) profile 15pp
Specifies the PKAF profile for X.509 Version 3 (V3) certificates and Version 2 (V2) Certificate Revocation Lists (CRLs). (IT-012)
AS 4524.62005 Grinding wheels for tool and tool room grinding (ISO 603-6:1999) 7pp
Adopts ISO603-6:1999 to specify the nominal dimensions for grinding wheels for tool and tool room grinding. (ME-033)
3pp
Adopts ISO21948:2001 to specify nominal dimensions, tolerances and designations of the active surface of plain sheets. (ME-033)
AS 4524.72005 Grinding wheels for manually guided grinding (ISO 603-7:1999) 7pp
Adopts ISO603-7:1999 to specify the nominal dimensions for grinding wheels for manually guided grinding. (ME-033)
AS 4524.82005 Grinding wheels for deburring and fettling/snagging (ISO 603-8:1999) 4pp
Adopts ISO603-8:1999 to specify the nominal dimensions for grinding wheels for deburring and fettling/snagging. (ME-033)
AS 45322006 Coated abrasivesFlap wheels with incorporated flanges or separate flanges (ISO 5429:2005) 2pp
Adopts ISO 5429:2005 to specify dimensions and designation for abrasive flap wheels with flanges. (ME-033)
11pp
Provides requirements for restraining patients, occupants and equipment sharing the same interior space in motor ve-
185
AS/NZS 4540:1999
Registration Authorities (ORAs) intending to operate in an open Public Key Authentication Framework. (IT-012)
AS/NZS 4545 Radionuclide imaging devices Characteristics and test conditions AS/NZS 4545.1:1999 Positron emission tomographs (IEC 61675-1 Ed. 1.0 E (1998))
AS/NZS 4540:1999 Digital broadcasting systems for television, sound and data servicesFraming structure, channel coding and modulation for cable systems (ETS 300 429:1994) 15pp
Provides guidance to manufacturers, service providers, carriers and consumers in the design, operation and maintenance of associated equipment and services, to ensure compatibility and optimum performance in the delivery of program content. This Standard is identical with and has been reproduced from ETS 300 429:1994. (IT-025)
34pp
Specifies terminology and test methods for declaring the characteristics of positron emission tomographs. This Standard is identical with and has been reproduced from IEC 61675-1:1998. (HE-003)
AS/NZS 4545.2:1999 Single photon emission computed tomographs (IEC 61675-2 Ed. 1.0 E (1998)) 21pp
Specifies terminology and test methods for declaring the characteristics of Anger type rotational gamma camera single photon emission computed tomographs. This Standard is identical with and has been reproduced from IEC 61675-2:1998. (HE-003)
AS/NZS 4541:1999 Digital broadcasting systems for television, sound and data servicesFraming structure, channel coding and modulation for 11/12 GHz satellite services (ETS 300 421:1994) 18pp
Specifies framing structure, channel coding and modulation for digital television emission by satellite. Provides a general description of the system for satellite digital TV transmission and specifies the digitally modulated signal to facilitate compatibility between pieces of equipment developed by different manufacturers. It identifies global performance requirements and features of the system, in order to meet service quality targets. This Standard is identical with and has been reproduced from ETS 300 421:1994. (CT-002)
AS/NZS 4545.3:1999 Gamma camera based wholebody imaging systems (IEC 61675-3 Ed. 1.0 E (1998)) 6pp
Specifies terminology and test methods for declaring the characteristics of gamma camera based wholebody imaging systems. This Standard is identical with and has been reproduced from IEC 61675-3:1998. (HE-003)
18pp
AS/NZS 4546:2004 Specification for woven wool packs for greasy wool
24pp
Specifies design, construction, testing and performance requirements for wool packs. (TX-012)
Provides guidelines for a series of test methods for long-life coatings for concrete and masonry including tests for concrete cure, water transmission, water vapour transmission, carbon dioxide diffusion, chloride ion diffusion and crack bridging abilities. (CH-003)
Specifies parameters and requirements for RF interfacing of ancillary equipment (such as VCRs, video cameras, subscription TV set-top units and electronic games) with PAL television receivers, to ensure compatibility and acceptable operational performance. (CT-002)
AS/NZS 4547 Methods of testing wool packs for greasy wool AS/NZS 4547.0:2004 Introduction and list of methods 1p
AS 4549 Particle size analysis AS 4549.11999 Photon correlation spectroscopy (ISO 13321:1996)
20pp
Provides the wool industry with test methods for assessing various attributes of wool packs. (TX-012)
13pp
Specifies parameters for analogue baseband interfaces for video and audio to be used between ancilliary equipment and television receiving equipment. (CT-002)
5pp
AS/NZS 4543 Protective devices against diagnostic medical X-radiation AS/NZS 4543.1:1999 Determination of attenuation properties of materials (IEC 61331-1 Ed. 1.0 (Bilingual 1994)) 10pp
Specifies the methods of determining and indicating the attenuation properties of protective devices against X-radiation. This Standard is identical with and has been reproduced from IEC 61331-1:1994. (HE-003)
Amendment 1 20 November 2000 Specifies a procedure for assessing the degree of fibrillation, or longitudinal splitting of tapes in woolpacks made from woven, HDPE fabric. (TX-012)
Sets out the application of photon correlation spectroscopy (PCS) to the measurement of an average particle size and a measure of the broadness of the size distribution of particles dispersed in liquids. It is applicable to particle sizes ranging from a few nanometers to about 1 , or to the onset of sedimention. This Standard is identical with and has been reproduced from ISO 13321:1996. (CH-032)
3pp
Sets out the procedures for sampling consignments of essential oils for the purpose of determining their organoleptic, physical and chemical characteristics. This Standard is identical with and has been reproduced from ISO 212:1973 (CH-021)
170pp
AS/NZS 4543.2:1999 Protective glass plates (IEC 61331-2 Ed. 1.0 (Bilingual 1994))
6pp
Specifies requirememnts for protective glass plates used for the manufacturing of protective devices against X-radiation. This Standard is identical with and has been reproduced from IEC 61331-2:1994. (HE-003)
Specifies a procedure for determining the force required to continue to pull a rod through a specimen of woven fabric. (TX-012)
Specifies uniform minimum requirements for the safe design, performance and rational use of energy of domestic gas cooking appliances, including stovettes, hotplates and separate ovens, intended for use with natural gas, town gas, liquefied petroleum gas and tempered liquefied petroleum gas. (AG-001)
AS 45522005 Gas fired water heaters for hot water supply and/or central heating 182pp
Provides manufacturers, designers, regulatory authorities, testing laboratories and similar organizations with uniform minimum requirements for the safety, performance and use of gas fired water heaters and central heating boilers for hot water supply and/or central heating. (AG-001)
AS/NZS 4543.3:2000 Protective clothing and protective devices for gonads (IEC 61331-3 Ed. 1.0 (English 1998)) 17pp
Provides requirements for the design and manufacture of clothing and devices for protection against Xradiation. This Standard is identical with and has been reproduced from IEC 61331-3:1998. (HE-003)
AS/NZS 4548 Guide to long-life coatings for concrete and masonry AS/NZS 4548.1:1999 Wall coatingsLatex extensible 11pp
188pp
(AG-001)
AS 45442005 Non-destructive testingEddy current testing for the detection of surface flaws Ferromagnetic and non-ferromagnetic metallic products 11pp
Specifies requirements for eddy current flaw detection of metals and alloys and includes requirements for the preparation of test procedures, calibration standards and calibration procedures. (MT-007)
115pp
Provides a guide to the features and typical characteristics of long-life extensible coatings intended for exterior or interior use on concrete and masonry, when applied by airless spray or roller in accordance with the manufacturer's instructions. (CH-003)
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of gas laundry dryers intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-001)
186
112pp
Provides minimum requirements for the safe design and performance of domestic gas refrigerators. (AG-001)
234pp
7pp
Amendment 1 4 June 2001 Amendment 2 31 August 2002 Provides minimum requirements for the safe design, performance and rational use of energy of indirect gas-fired ducted air heaters with gas consumption not exceeding 5000 MJ/h. (AG-001)
Specifies the essential requirements and basic standards for the management and delivery of Type A gas appliances servicing and checking related aspects of the appliance installation. (AG-012)
AS/NZS 4582:1999 MF and HF radiocommunications equipment in the international maritime mobile radiotelephone service (ETSI 300 373 1A:1997, ETSI 300 373:1995) 55pp Available Superseded
Amendment 1 2 December 2004 Sets out radiofrequency requirements for medium frequency and high frequency radiocommunications equipment intended to operate in the maritime services, and specifies minimum requirements for transmitters and receivers for use of the radiofrequency spectrum in accordance with spectrum planning. This Standard is based on but is not equivalent to, and has been reproduced from, ETS 300 373:1995 and its Amendment ETS 300 373 1A:1997. (RC-004)
137pp
95pp
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of domestic outdoor gas barbecues and solid fuel-to-gas conversion kits intended for use with natural gas, town gas, tempered liquefied petroleum gas and low pressure ((2.75 kPa) liquefied petroleum gas. (AG-001)
Gives practical guidance for the training and certification of scaffolders, the preparation of sites for scaffolding, and the safe selection, supply, erection, alteration, dismantling, maintenance, inspection and use of scaffolding and scaffolding equipment. (BD-036)
AS 45582000 (AG 1082000) Decorative gas log and other fuel effect appliances 192pp
Amendment 1 12 June 2001 Amendment 2 31 August 2002 Amendment 3 15 March 2003 Provides minimum requirements for the safe design, performance of decorative gas log and other fuel effect appliacnes with gas consumption not exceeding 73 MJ/h. (AG-001)
AS/NZS 4577:1999 MicrographicsReaders for transparent microformsPerformance characteristics (ISO 6198:1993) 8pp
Specifies the essential performance characteristics for readers with magnification less than or equal to 50:1 with black and white microfilm to a maximum width of 35 mm. It also specifies the performance of readers for roll microfilm, microfiche and image cards. This Standard is identical with and has been reproduced from ISO 6198:1993. (MS-004)
AS/NZS 4583:1999 Amplitude modulated equipment for use in the aeronautical radio service in the frequency range 118 MHz to 137 MHz 22pp
Amendment 1 Specifies the minimum radiofrequency requirements for radiocommunication equipment intended to operate in the aeronautical radio services in the frequency range 118 MHz to 137 MHz using amplitude modulation and 25 kHz channel spacing. The Standard includes essential requirements and test methods for transmitters and receivers. It has been developed from AirServices Australia specification YSCE 3078 Issue 1 and Ministry of Commerce (NZ) specification RFS 1. (RC-006)
AS/NZS 4578:1999 MicrographicsReaders for transparent microformsMeasurement of characteristics (ISO 7565:1993) 12pp
Specifies methods and instruments for measuring the characteristics for readers specified in AS/NZS 4577:1999 (ISO 6198). It applies to magnification, resolution, distortion, screen luminance, screen contrast and film gate temperatures. This Standard is identical with and has been reproduced from ISO 7565:1993. (MS-004)
AS/NZS 4585 Low styrene emission resins AS/NZS 4585.1:1999 Determination of styrene evaporation from unsaturated polyester and vinyl ester resins 3pp
Sets out a method for measuring the rate of loss of styrene from contact moulded materials and to define what constitutes a low styrene emission resin. (CH-037)
116pp
Applies to gas pool heaters in which water is intended to be heated to temperatures not exceeding 60C. (AG-001)
127pp
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of various types of commercial catering equipment intended for use with natural gas, town gas, liquefied petroleum gas and tempered liquefied petroleum gas. (AG-001)
AS/NZS 4585.2:1999 The assessment of degree of interlaminar adhesion in unsaturated polyester and vinyl ester resinGlass fibre laminates 3pp
Sets out a method for assessing the interlaminar adhesion in typical contact moulded chopped strand mat laminates. (CH-037)
AS 45652004 Radiant gas heaters for outdoor and nonresidential indoor use 129pp
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of radiant gas heaters with a gas consumption not exceeding 70MJ/h for outdoor and non-residential indoor use intended for use with natural gas, town gas, tempered liquefied petroleum gas and low pressure ((2.75kPa) liquefied petroleum gas. (AG-001)
AS/NZS 4580:1999 Medical electrical equipmentDigital imaging and communications in medicine (DICOM) Radiotherapy objects (IEC/TR 61852 Ed. 1.0 (English 1998)) 82pp
Defines a number of information objects applicable to the domain of radiation oncology to support the transfer of radiotherapy related data between devices within or outside of a radiotherapy department. It is identical with and has been reproduced from IEC 61852:1998. (HE-003)
AS/NZS 4586:2004 Slip resistance classification of new pedestrian surface materials 31pp
Amendment 1 14 February 2005 Provides means of classifying pedestrian surface materials according to their frictional characteristics when determined in accordance with test methods proposed by this Standard. (BD-094)
AS/NZS 4581:1999 Management system integrationGuidance to business, government and community organizations 22pp
Describes the components of a generic management system which are applicable to all sizes and types of organizations. Each component describes what needs to be done but leaves the 'how' up to each organization. A major advantage of such a system is that it can apply to all aspects of an organization's activities such as quality management, environmental management, occupational health and safety management and human resource management. The specific requirements for such activities can be added. The advantage of the generic managment system approach is the potential for improving effectiveness and efficiency as well as overall improvement of business operations. (A-000)
AS 45871999 Water mist fire protection systemsSystem design, installation and commissioning 41pp
Sets out requirements for the protection of life and property from the consequences of fire, through standardization of design, installation and commissioning of water-based fire protection systems that use water mist as the extinguishing agent. (FP-011)
15pp
Provides manufacturers, designers, regulatory authorities, testing laboratories and similar organizations with uniform minimum requirements for the safety, performance and use of flue cowls. (AG-006)
27pp
Provides manufacturers, designers, regulatory authorities, testing laboratories and similar organizations with uniform minimum requirements for the safety, performance and use of twin wall metal flues. These requirements cover twin wall flue and components, excluding flue cowls (refer AS4566), used for flueing gas appliances with a maximum flue gas temperature of 270C. (AG-006)
AS/NZS 4589:1999 MicrographicsMicrofilming of documents on 16 mm and 35 mm silver-gelatin type microfilmOperating procedures (ISO 6199:1991) 18pp
Establishes general principles for document filming on 16 mm and 35 mm silver-gelatin type microfilm, including orientation of images on film, and the area for codes. It includes the information required to facilitate identification, classification, testing and subsequent use of the microfilm. It applies to rotary and planetary microfilming. It is based on, but not equivalent to, and has been reproduced from ISO 6199:1991. (MS-004)
AS/NZS 4582:2004 MF and HF radiocommunications equipment in the international maritime mobile radiotelephone service(ETS 300 337:1995, MOD) 49pp
Amendment 1 25 January 2005 States the minimum requirements for radio transmitters and receivers, for use on ships, operating in either the Medium Frequency (MF) only or in the Medium and High Frequency (MF/HF) bands allocated in the International Telecommunications Union (ITU) Radio Regulations [1], to the Maritime Mobile Service (MMS). (RC-004)
AS 45682005 Preparation of a safety and operating plan for gas networks 15pp
Provides a basis for the development of a Safety and Operating Plan, (or Safety Case) for gas industry network operators. Describes the fundamental elements to be addressed in the preparation of a Safety and Operating Plan by a distri
89pp
Amendment 1 23 May 2008 Provides industry and government with a common client data interchange standard that eliminates the need for creative data variations. (IT-027)
187
AS 4591.11999
AS 4591 Internal combustion enginesVocabulary of components and systems AS 4591.11999 Structure and external covers (ISO 7967-1:1987) AS 4594 Internal combustion enginesPerformance AS 4594.01999 Application 2pp
tion at full load as a function of engine speed. This Standard is identical with and has been reproduced from ISO 2534:1998. (ME-020)
12pp
Defines terms relating to engine structural components and external covers for internal combustion engines. This Standard is identical with and has been reproduced from ISO 7967-1:1987. (ME-020)
Sets out the comparison of accuracies of measurement between International Standards adopted as Standards in this series. (ME-020)
AS 4594.101999 Engines for agricultural tractor and marine useTest code, net power (ISO 2288:1997) 26pp
Specifies a method for testing internal combustion engines intended for propulsion of agricultural tractors and machines. It applies to evaluation of performance with a view to presenting curves of power and specific fuel consumption at full load as a function of engine speed. This Standard is identical with and has been reproduced from ISO 2288:1997. (ME-020)
19pp
AS 4594.11999 Standard reference conditions, declarations of power, fuel and lubricating oil consumption and test methods (ISO 3046-1:1995) 36pp
Specifies standard reference conditions and the methods of declaring the power, fuel consumption, lubricating oil consumption and test methods for internal combustion engines. This Standard is identical with and has been reproduced from ISO 3046-1:1995. (ME-020)
Defines terms relating to the main running gear for internal combustion engines. This Standard is identical with and has been reproduced from ISO 7967-2:1987. (ME-020)
AS 4594.111999 Engines for motorcycle useTest code, net power (ISO 4106:1993) 19pp
Specifies a method for testing engines designed for motorcycles. It applies to the evaluation of their performance with a view to presenting curves of power and specific fuel consumption at full load as a function of engine rotational speed. This Standard is identical with and has been reproduced from ISO 4106:1993. (ME-020)
AS 4591.31999 Valves, camshaft drive and actuating mechanisms (ISO 7967-3:1987) 15pp
Defines terms relating to valves, camshaft drive and actuating mechanisms for internal combustion engines. This Standard is identical with and has been reproduced from ISO 7967-3:1987. (ME-020)
AS 4594.31999 Engines for land, rail-traction and marine useTest measurements (ISO 3046-3:1989) 4pp
Summarizes the common measurement techniques of the main performance parameters of internal combustion engines to ensure the required accuracy of measurement. This Standard is identical with and has been reproduced from ISO 3046-3:1989. (ME-020)
AS 4591.41999 Pressure charging and air/exhaust gas ducting systems (ISO 7967-4:1988) 14pp
Defines terms relating to pressure charging and air/exhaust gas ducting systems for internal combustion engines. This Standard is identical with and has been reproduced from ISO 7967-4:1988. (ME-020)
AS 4594.41999 Engines for land, rail-traction and marine useSpeed governing (ISO 3046-4:1997) 13pp
Specifies a classification for the requirements and parameters of speed-governing systems and terms and definitions of typical engine speeds for internal combustion engines. This Standard is identical with and has been reproduced from ISO 3046-4:1997. (ME-020)
AS 45951999 Copper, lead and zinc sulfide concentrates Precision and bias of mass measurement techniques (ISO 12745:1996) 34pp
Sets out guidelines to test for bias over a wide range of mass measurement techniques, to estimate the precision for each technique and to calculate the precision for wet mass when estimated by one of those techniques. This Standard is identical with and has been reproduced from ISO 12745:1996. (MN-005)
13pp
Defines terms relating to cooling systems and their components for internal combustion engines. This Standard is identical with and has been reproduced from ISO 7967-5:1992. (ME-020)
AS 4594.51999 Engines for land, rail-traction and marine useTorsional vibrations (ISO 3046-5:1978, ISO 30465:1978/Erratum:1979) 1p
Specifies general requirements and definitions for torsional vibrations in shaft systems of sets driven by internal combustion engines. This Standard is identical with and has been reproduced from ISO 3046-5:1978 and ISO 3046-5:1978/Erratum:1979. (ME-020)
AS 45961999 Copper, lead and zinc sulfide concentrates Determination of mass of contained metal in a lot (ISO 13543:1996) 5pp
Specifies a method for determining the mass of contained metal in a lot, based on the wet mass, moisture content and dry basis metal content of the lot. This Standard is identical with and has been reproduced from ISO 13543:1996. (MN-005)
13pp
Defines terms relating to lubricating systems for internal combustion engines. This Standard is identical with and has been reproduced from ISO 7967-6:1992. (ME-020)
29pp
AS 4594.61999 Engines for land, rail-traction and marine useOverspeed protection (ISO 3046-6:1990) 3pp
Specifies general requirements and definitions for overspeed limiting devices used for the protection of internal combustion engines and their driven machinery. This Standard is identical with and has been reproduced from ISO 3046-6:1990. (ME-020)
Defines terms relating to governing systems for internal combustion engines. This Standard is identical with and has been reproduced from ISO 7967-7:1998. (ME-020)
AS/NZS 4598 Guide to the development of application software AS/NZS 4598.1:1999 Software user documentation (BS 7649:1993)
9pp
Defines terms relating to starting systems for internal combustion engines. This Standard is identical with and has been reproduced from ISO 7967-8:1994. (ME-020)
AS 4594.71999 Engines for land, rail-traction and marine useCodes for engine power (ISO 3046-7:1995) 3pp
Specifies codes for engine brake power to simplify the application of the statements of power and to facilitate communication. This Standard is identical with and has been reproduced from ISO 3046-7:1995. (ME-020)
98pp
17pp
Defines terms relating to the control and monitoring systems for internal combustion engines. This Standard is identical with and has been reproduced from ISO 7967-9:1996. (ME-020)
AS 4594.81999 Engines for road vehicle useTest code, net power (ISO 1585:1992) 26pp
Specifies a method for testing engines designed for automotive vehicles. It applies to the evaluation of their performance with a view to presenting curves of power and specific fuel consumption at full load as a function of engine speed. This Standard is identical with and has been reproduced from ISO 1585:1992. (ME-020)
Provides designers of application software with guidelines for the design and preparation of user documentation for application software covering what information users need, how to decide what information should be provided (on paper and on-screen) and how to prepare the relevant documentation. This Standard is identical with and has been reproduced from BS 7649:1993. (IT-015)
101pp
AS/NZS 4592:2005 Latex barrier membranes (dams) for prophylactic use in sexual activity 13pp
Specifies requirements for latex barrier membranes (dams) for prophylactic use including allowable materials, dimensions, surface finish, taste and smell, thermal stability, packaging and labelling as well as physical properties such as elongation and tear and rupture resistance. These differentiate prophylactic dams from other barrier products such as dental dams, which are not intended for, and may not be suitable for use in, sexual situations. (CS-009)
Provides designers of application software with guidelines for the design and preparation of user documentation for on-screen covering content, navigation, style and presentation. This Standard is identical with and has been reproduced from BS 7830:1996. (IT-015)
AS 4594.91999 Engines for road vehicle useTest code, gross power (ISO 2534:1998) 29pp
Specifies a method for testing internal combustion engines for propulsion of road vehicles. It is applicable to the evaluation of their performance with a view to presenting curves of power and specific fuel consump-
AS 4599 Digital televisionTerrestrial broadcasting AS 4599.12007 Characteristics of digital terrestrial television transmissions 51pp
Provides television receiver manufacturers and broadcasters with the technical specification for the Australian digital terrestrial television transmission system. (CT-002)
188
141pp
Sets out minimum requirements for the design of structural members cold-formed to shape from carbon or low-alloy steel sheet, strip, plate or bar not more than 25mm in thickness and used for load-carrying purposes in buildings. (BD-082)
20pp
Presents designations for mailing envelopes for envelope users, handlers, manufacturers and Australia Post. Information is provided on Post Office Preferred conditions, typical sizes of envelopes and envelope windows and terminology for envelopes. (IT-008)
107pp
Sets out minimum requirements for the design of structural members cold-formed to shape from carbon or low-alloy steel sheet, strip, plate or bar not more than 25 mm in thickness and used for load-carrying purposes in buildings and structures. (BD-082)
AS 46222004 Electrical and electronic ignition devices for gas appliances 17pp
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of electrical and electronic ignition devices. These electrical and electronic ignition devices are intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-011)
AS/NZS 4600 Supplement 1:1998 Cold-formed steel structuresCommentary (Supplement to AS/NZS 4600:1996) 115pp
Provides background information and guidance to the requirements of AS/NZS 4600:1996. (BD-082)
AS 4614 Methods for the analysis of ilmenite AS 4614.11999 Determination of titanium content Titrimetric method
7pp
15pp
Amendment 1 18 March 2003 Sets out requirements for the design, testing and installation of vehicle security immobiliser systems for road vehicles. (EL-031)
Sets out a titrimetric method, using aluminium reduction and ammonium iron (III) sulfate titration, for the determination of the titanium content of ilmenite. (MN-004)
AS 46232008 Jointing compounds and materials for use in gas pipe joints 18pp
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar for the safety, performance and use of jointing compounds and materials for use with threaded or flanged joints in pipes and fittings used in gas installations. These jointing compounds and materials are intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-013)
AS 4615 Series R freight containers AS 4615.12000 Requirements for container compliance 3pp
Sets out the minimum requirements for the compliance of Series R freight comtainers prior to transport use. (ME-068)
9pp
Specifies the visual requirements for high visibility safety garments to be worn by people in situations where they may be exposed to hazard from moving traffic or from moving plant or equipment in charge of an on-board controller. The Standard covers garments suitable for daytime wear, nighttime wear where they will be seen by retroreflected light or for wear under both conditions. (SF-004)
51pp
AS 46031999 Flashback arrestersSafety devices for use with fuel gases and oxygen or compressed air 5pp
Specifies the requirements and tests for safety devices for fuel gases and oxygen or compressed air used downstream of the cylinders or pipeline, outlet regulators and pipeline outlet points and upstream of blowpipes used for welding, cutting and allied processes. (ME-002)
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of combination controls up to 50mm size. These combination controls are intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-011)
AS/NZS 4616:1999 Abrasive grains and crudesChemical analysis of silicon carbide (ISO 9286:1997) 21pp
Specifies a method for determining surface impurities of abrasive grains and the silicon carbide content of crushed crude when the silicon carbide content is greater than 95% by weight. This Standard is identical with and has been reproduced from ISO 9286:1997. (ME-033)
AS 46062000 Fire resistant and antistatic requirements for conveyor belting used in underground coal mines 6pp
Sets out minimum safety requirements for fire resistant and antistatic (FRAS) conveyor belting used in underground coal mines. (RU-002)
31pp
35pp
29pp
This Standard presents performance based requirements for personal response systems which may be installed in private dwellings or residential care facilities. (TE-016)
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of manual shut off valves up to 150mm size. These manual shut off valves are intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-011)
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of quick-connect devices for gas. These quick-connect devices are intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-011)
29pp
AS 46282005 Pressure and temperature limit devices for use with gas burners 24pp
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of pressure and temperature limit devices for use with gas burners. These pressure and temperature limit devices are intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-011)
Provides a guide for the development and application of an effective dispute management system. (MB-003)
29pp
AS/NZS 4609:1999 Specification for water disinfection tablets Iodine releasing 13pp
Sets out requirements for iodine releasing water disinfection tablets for use by individuals to disinfect small amounts of water from untreated water supplies and water of unknown qualities. (FT-020)
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of self-acting gas pressure regulators up to 50mm size. These gas pressure regulators are intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-011)
AS/NZS 4610 FurnitureSchool and educational AS/NZS 4610.2:1999 ChairsStrength, durability and stability 42pp
Specifies requirements for strength, durability and stability of chairs for school and educational use. (CS-088)
33pp
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of gas appliance thermostats up to 50mm size. These gas appliance thermostats are intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-011)
27pp
17pp
AS/NZS 4610.3:1999 Tables and storage furnitureStrength, durability and stability 59pp
Specifies requirements for strength, durability and stability of tables and storage furniture for school and educational use. (CS-088)
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of flame safeguards operating on the thermoelectric principle. These flame safeguards are intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-011)
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of leakage detection systems. These leakage detection systems are intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-011)
189
AS 46312005
AS 46312005 Limited flexibility connectors for gas
piping within gas distribution networks covered by AS/NZS 4645.1, where the maximum allowable operating pressures up to or equal to 1050 kPa and the hoop stress is less than or equal to 20% SMYS of the pipe. Steel piping systems for gas outside these limits are generally covered by the AS 2885 suite of Standards and for some jurisdictions. AS/NZS 4645.1 provides for limited use up to 1965 kPa. (AG-008) sult equivalent to an Australian Standard or to a Joint Australian/New Zealand Standard food microbiology method (AS 1766/AS/NZS/1766 series Standards), the result for which is reported as 'detected' or 'not detected'. (FT-024)
28pp
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of limited flexibility connectors for gas. These limited flexibility connectors are intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-011)
5pp
48pp
AS 46332004 Medical laboratoriesParticular requirements for quality and competence (ISO 15189:2003) 39pp
Specifies requirements for quality and competence particular to medical laboratories. It is identical to, and has been reproduced from, ISO15189:2003. (HE-029)
The intent of this Standard is to provide for the protection of the general public, Gas Distribution Network operating personnel and the environment, and to ensure safe and reliable operation of Gas Distribution Network that reticulate gas to consumers. This Part 3 provides more detailed requirements for design, materials, construction, testing and commissioning of plastic mains and services within a network and is to be used together with Part 1. It covers gas distribution networks covered by Part 1 of this Standard for operating pressures up to 600 kPa. (AG-008)
Sets out guidelines for determining the equivalence of food microbiological test methods on quantitative tests. The protocol outlined in this Standard may be used to determine whether an alternate enumeration method will yield an equivalent result to an Australian Standard or to a Joint Australian/New Zealand Standard food microbiology method (AS 1766/AS/NZS 1766 series Standards). (FT-024)
6pp
43pp
AS 46352004 Non-destructive testingQualification of personnel for limited applications of nondestructive testing (ISO 20807:2004) 30pp
Adopts ISO20807:2004 to specify a system for the qualification of personnel who perform NDT applications of a limited, repetitive or automated nature. (MT-007)
Specifies the requirements for safe management of a fuel gas distribution network throughout the life cycle of all elements of that network. The requirements apply to the life cycle of new assets in new or existing systems, but the Sections on operations, maintenance, repair and decommissioning are suitable for application to existing assets in existing systems. (AG-008)
Amendment 1 21 February 2002 Sets out guidelines for determining the equivalence of food microbiological test methods on confirmation tests. The protocol outlined in this document may be used to determine whether an alternate method will yield a result equivalent to an Australian Standard or to a Joint Australian/New Zealand Standard food microbiology method (AS 1766/AS/NZS 1766 series Standards), for confirmation tests using a pure culture. (FT-024)
10pp
Sets out guidelines for determining the equivalence of food microbiological test methods on antibiotic tests. The protocol outlined in this document provides guidance on the framework and basis for the evaluation/validation of microbial inhibitor tests, which allows the comparison of data evaluated for different tests. (FT-024)
AS 46372006 Measurement of pump displacement and free air delivery of a reciprocating air compressor package 11pp
Sets out a simplified method for determining pump displacement and free air delivery of a reciprocating air compressor package. (ME-085)
30pp
AS 46622003 Ceramic tilesDefinitions, classification, characteristics and marking (ISO 13006:1998) 57pp
Defines terms and establishes classifications, characteristics and marking requirements for ceramic tiles of the best commercial quality (first quality). (BD-044)
3pp
Adopts ISO3366:1999 to specify the dimensions and limit deviations for coated abrasive rolls and their designation. (ME-033)
Provides basic requirements for domestic diaphragm gas meters under tender, to ensure optimum performance, both, when purchased, and after extended service; and to satisfy the requirements of statutory authorities after due consideration is given to variations in accuracies of meter testing. Covers the working environment, materials of construction and performance required of domestic diaphragm meters of badge capacity up to 6m3/h when tested at standard conditions (MSC) on air. (AG-008)
AS/NZS 4641:2007 Electrical apparatus for detection of oxygen and other gases and vapours at toxic levels General requirements and test methods 34pp
Amendment 1 12 June 2008 Specifies requirements and test methods for manufacturers, testing authorities and certifying bodies concerned with electrical apparatus for the measurement of the concentration of oxygen and toxic levels of gases and vapours. (EL-014)
AS 46491999 Brake shoe assemblies and disc brake pad assembliesAttachment (ISO 6312:1981, ISO 6313:1980, ISO 6314:1980) 9pp
Specifies the performance requirements for attaching the brake lining material to the lining carrier of brake shoe assemblies and disc brake pad assemblies used on road vehicles. Test methods, adopted with national modifications from ISO 6312:1981, ISO 6313:1980 and ISO 6314:1980, have been included in appendices. (ME-054)
AS/NZS 4665 Performance of external power supplies AS/NZS 4665.1:2005 Test method and energy performance mark 18pp
Specifies a test method for assessing the energy efficiency of external power supplies and includes information on the energy performance mark. (TE-001)
92pp
Specifies the uniform minimum requirements for manufacturers, designers, regulatory authorities, testing laboratories and similar organizations for the safety, performance and use of overhead radiant tube gas heaters intended for use with natural gas, town gas, tempered liquefied petroleum gas and liquefied petroleum gas. (AG-001)
AS/NZS 4645 Gas distribution networks AS/NZS 4645.1:2008 Network management 89pp
29pp
Sets out requirements and guidelines for the selection and installation of insulating glass units in buildings. (BD-007)
42pp
Specifies performance-based requirements for a fuel Gas Distribution Network safety, defining important principles throughout the life cycle of Gas Distribution Networks. The standard provides prescriptive, deemed to comply, means of compliance in support of some of those requirements and allow for alternative means of compliance that may be also acceptable provided the required safety outcomes can be demonstrated. (AG-008)
Sets out requirements for auditing fire safety measures against nominated audit criteria, including those relating to life safety. Includes general principles of auditing, audit program management, the fire safety audit process and responsibilities, reporting, fire safety audit levels, audit team competence evaluation of auditors and derivation of fire safety audit criteria. (FP-021)
AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass 10pp
Sets out the quality requirements for cut sizes of flat, transparent, clear ordinary annealed, tinted heat-absorbing, patterned and wired glass for general glazing and/or further processing. (BD-007)
AS/NZS 4659 Guide to determining the equivalence of food microbiology test methods AS/NZS 4659.1:1999 Qualitative tests 8pp
AS/NZS 4668:2000 Glossary of terms used in the glass and glazing industry 43pp
Provides manufacturers, suppliers and users of glass with definitions of the terms used in the glass and glazing industry, specifically in building applications, and includes definitions of the terms used in glass-related Australian and New Zealand Standards. (BD-007)
40pp
The intent of this Standard is to provide for the protection of the general public, gas distribution network operating personnel and the environment, and to ensure safe and reliable operation of gas distribution networks that reticulate gas to consumers. It covers steel
Sets out guidelines for determining the equivalence of food microbiological test methods on qualitative tests. The protocol outlined in this Standard may be used to determine whether an alternate method will yield a re-
190
AS 4685 (Set)2004 Playground Equipment Safety Set AS 4685 Playground equipment AS 4685.12004 General safety requirements and test methods (EN 1176-1:2003) 60pp
Amendment 1 24 October 2006 Amendment 2 28 April 2008 Specifies general safety requirements for playground equipment covering materials, design and manufacture. (CS-005)
AS/NZS 4671:2001 Steel reinforcing materials (DD ENV 10080:1996, ISO 6935-1:1991, ISO 6935-2:1991, ISO 6935-3:1992, ISO 69353:1992/Cor 1:2000) 33pp
Amendment 1 5 June 2003 Sets out specifications for Australian and New Zealand Steel reinforcing materials (bars, coils and welded mesh). Requirements for chemical, mechanical and physical properties for three different strength grades and the three different ductility classes are also covered. (BD-084)
AS/NZS 4672 Steel prestressing materials AS/NZS 4672.1:2007 General requirements 40pp
AS 4685.22004 Particular safety requirements and test methods for swings (EN 1176-2:2003) 16pp
Amendment 1 23 October 2006 Amendment 2 28 April 2008 Specifies particular safety requirements for swings intended for permanent installation for use by children. General requirements and test methods are set out in AS 4685.1. (CS-005)
AS/NZS 4688.4:2000 Determination of stabilityChairs with tilting or reclining mechanisms when fully reclined and rocking chairs (ISO 7174-2:1992) 7pp
Specifies stability requirements for chairs of fixed height and either fixed or swivel bases and which have tilting or reclining mechanisms, in order to provide purchasing authorities, specifiers, users, retailers and manufacturers with a uniform set of performance requirements that can form the basis of selection and evaluation criteria. This Standard is identical with and has been reproduced from ISO 7174-2:1992. (CS-088)
Specifies requirements for high strength steel tendons to be used for prestressing concrete and for other similar purposes. (BD-084)
10pp
Specifies the minimum frequency of testing necessary to ensure compliance with the requirements of AS 4672.1 for prestressing steel products intended for use in concrete structures designed in accordance with AS 3600 or NZS 3101.1. (BD-084)
AS 4685.32004 Particular safety requirements and test methods for slides (EN 1176-3:2003) 11pp
Amendment 1 23 October 2006 Specifies particular safety requirements for slides intended for permanent installation for use by children. General requirements and test methods are set out in AS4685.1. (CS-005)
AS 4689 Fresh cut flowers and foliageAustralian and related flora AS 4689.12004 General and postharvest vase life requirements 8pp
Provides growers, suppliers, exporters and purchasers with minimum specifications for selected native flowers and foliage for export, and enable use of this criteria to assist in evaluating, selecting or achieving the consistency in quality required for export. Note: As colour calibration varies from monitor to monitor and printer to printer, colour representation in the PDF version (and print-outs obtained from the PDF) of this document may vary from the original hardcopy publication. (CS-090)
AS 4685.42004 Particular safety requirements and test methods for runways (EN 1176-4:2003) 11pp
Specifies particular safety requirements for runways intended for permanent installation for use by children. General requirements and test methods are set out in AS 4685.1. (CS-005)
AS/NZS 4676:2000 Structural design requirements for utility services poles 81pp
Sets out minimum loads and requirements for strength, serviceability to be used in the structural design or assessment of individual poles supporting one or more utility services such as street lighting. Covers poles constructed of timber, steel and concrete, with provisions for other materials of construction, and allows design by calculation or by prototype testing. Intended as a structural design reference for standard specifications for poles constructed from a particular material. (CE-019)
AS 4685.52004 Particular safety requirements and test methods for carousels (EN 1176-5:2003) 14pp
Amendment 1 23 October 2006 Specifies particular safety requirements for carousels of diameter greater than 0.5m intended for permanent installation for use by children. General requirements and test methods are set out in AS4685.1. (CS-005)
6pp
Sets out particular requirements for Anigozanthos (kangaroo paws), to be applied in addition to the general requirements of AS4689.1, in order to specify quality and consistency criteria for product for export. Note: As colour calibration varies from monitor to monitor and printer to printer, colour representation in the PDF version (and print-outs obtained from the PDF) of this document may vary from the original hardcopy publication. (CS-090)
AS 4685.62004 Particular safety requirements and test methods for rocking equipment (EN 1176-6:2003) 15pp
Amendment 1 28 April 2008 Specifies particular safety requirements for seesaws and rocking equipment intended for permanent installation for use by children. General requirements and test methods are set out in AS 4685.1. (CS-005)
AS 4689.32004 Banksia
6pp
17pp
Specifies minimum requirements for the materials, design, fabrication and erection of steel utility services poles. It is intended to be used in conjunction with the forthcoming issue of AS 4676, Structural design requirements for utility services poles. (CE-019)
8pp
Sets out particular requirements for Banksia coccineum and Banksia of the acorn type e.g. Banksia hookeriana, to be applied in addition to the general requirements of AS4689.1, in order to specify quality and consistency criteria for product for export. Note: As colour calibration varies from monitor to monitor and printer to printer, colour representation in the PDF version (and print-outs obtained from the PDF) of this document may vary from the original hardcopy publication. (CS-090)
112pp
Amendment 1 7 July 2003 Amendment 2 15 August 2008 Specifies the design criteria and sets out guidance for use in the design of earth-retaining structures, for use by engineers and designers. (CE-032)
Sets out requirements for the construction and installation of temporary fencing and hoardings. (CE-008)
6pp
AS/NZS 4688 FurnitureFixed height chairs AS/NZS 4688.1:2007 Human-interface and general requirements 9pp
Specifies requirements for chairs (excluding lounge chairs) of fixed height with either fixed or swivel bases intended to seat one person in an upright position. (CS-088)
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles 23pp
Specifies requirements and tests for hot-dip zinc coatings on fabrications, assembled steel products, tubular fabrications, fabricated wire work, steel forgings, steel stampings, ferrous castings, nails and small components. (MT-009)
Sets out particular requirements for koala fern, Caustis blakei, to be applied in addition to the general requirements of AS4689.1, in order to specify quality and consistency criteria for products for exports. Note: As colour calibration varies from monitor to monitor and printer to printer, colour representation in the PDF version (and print-outs obtained from the PDF) of this document may vary from the original hardcopy publication. (CS-090)
AS/NZS 4681:2000 The storage and handling of Class 9 (miscellaneous) dangerous goods and articles 57pp
Amendment 1 19 March 2001 Sets out requirements and recommendations for the safe storage and handling of Class 9 (miscellaneous) dangerous goods and articles, in packages, IBCs and bulk. Advice is given on fire protection, waste disposal, operations and per-
6pp
Sets out particular requirements for waxflower, to be applied in addition to the general requirements of AS4689.1, in order to specify quality and consistency criteria for product for export. Note: As colour calibration varies from monitor to monitor and printer to printer, colour representation in the PDF version (and print-outs obtained from the PDF) of this document may vary from the original hardcopy publication. (CS-090)
191
AS 4689.62004
AS 4689.62004 Ozothamnus diosmifolius syn. Helichrysum diosmifolium (rice flower) 9pp
Sets out particular requirements for rice flower, to be applied in addition to the general requirements of AS4689.1, in order to specify quality and consistency criteria for product for export. Note: As colour calibration varies from monitor to monitor and printer to printer, colour representation in the PDF version (and print-outs obtained from the PDF) of this document may vary from the original hardcopy publication. (CS-090)
AS 4693.42004 Determination of tensile properties of synthetic sports surfaces (EN 12230:2003) 6pp
Specify a method for the determination of the tensile properties of materials used as surfaces for sports areas. (PL-048)
for use within and between Australian health care settings. (IT-014)
66pp
Amendment 2 27 December 2006 Provides guidance for the implementation of patient administration functions using the Health Level Seven (HL7) Version 2.4 protocol. It is primarily designed for use within and between Australian and New Zealand health care settings. (IT-014)
6pp
40pp
Sets out particular requirements for Telopea speciosissima and its hybrid forms, to be applied in addition to the general requirements of AS4689.7, in order to specify quality and consistency criteria for product for export. Note: As colour calibration varies from monitor to monitor and printer to printer, colour representation in the PDF version (and print-outs obtained from the PDF) of this document may vary from the original hardcopy publication. (CS-090)
Provides guidance for the implementation of patient administration functions using the Health Level Seven (HL7) Version 2.3.1 protocol, for communication within and between Australian healthcare settings. The Standard covers the function of patent administration, as this forms the basis for most clinical healthcare messages. (IT-014)
AS 4691 Laser-based speed detection devices AS 4691.12003 Definitions and device requirements 18pp
Amendment 1 7 September 2006 Specifies functional requirements for laser-based devices that are used to measure the speed of targets for law enforcement or scientific measurement using the lidar principle. Includes devices linked to image capture systems and provides methods for determination of accuracy and operational beam width in appendices. (CS-098)
AS 4693.72004 Determination of the behaviour under a rolling load (EN 1569:1999) 2pp
Specify a method of test for the determination of behaviour under a rolling load of certain surfaces for sports areas. (PL-048)
33pp
Defines how Australian health care organisations implement the American Standard Health Level Seven Version 2.3 for communication between health service providers of patient administration information which forms the basis for most clinical health care messages. (IT-014)
AS 4693.82004 Procedure for the preparation of synthetic turf and textile test pieces (EN 12229:1999) 3pp
Specifies a procedure for the preparation of test pieces of synthetic turf and textile sports surfaces. (PL-048)
20pp
9pp
Specifies procedures to be followed when using a laser-based device to measure the speed of a target. Requirements for the training of operators and the evaluation of captured images are set out in appendices. (CS-098)
7pp
AS/NZS 4692 Electric water heaters AS/NZS 4692.1:2005 Energy consumption, performance and general requirements 71pp
Specifies test methods and performance and construction requirements for storage water heaters of rated hot water delivery up to 630L or nominal capacity of 710L, heat exchanger water heaters with a heat storage volume up to 710L, and water heaters that use electric resistance as the primary energy source. (EL-020)
Defines the implementation of the HL7 Version 2.2 Standard within Australian public and private hospitals. Covers the functions of patient admission, discharge and transfer (ADT) as these functions form the basis for all HL7 messages. Provides interpretation and guidance on which HL7 trigger events, segments and data elements are mandatory (required), optional or conditional (required, based on a condition), and relevant usage notes for the Australian health environment. Provides consistent use of data definitions and references to the National Health Data Dictionary. (IT-014)
16pp
Sets out a method for determination of the glycemic index of carbohydrates in foods. Also, defines the glycemic index (GI), outlines qualifying factors and requirements for its application. (FT-024)
AS 46962007 Hygienic production and transportation of meat and meat products for human consumption 74pp
Sets out requirements for hygienic production and transportation of meat and meat products for human consumption that are derived from animals of the bovine, bubaline, camelidae, caprine, cervidae, ovine, porcine and soliped species slaughtered other than in wild state. (FT-021)
70pp
AS/NZS 4692.2:2005 Minimum Energy Performance Standard (MEPS) requirements and energy labelling 34pp
Specifies the Minimum Energy Performance Standards (MEPS) requirements for various water heaters within the scope of AS/NZS4692.1. (EL-020)
AS 46962002 The hygienic production and transportation of meat and meat products for human consumption 72pp Available Superseded
Sets out requirements for hygienic production and transportation of meat and meat products for domestic and export use. This Australian Standard was prepared by the Standing Committee on Agriculture and resource Management (SCARM) on behalf of the Agriculture and resource Management Council of Australia and New Zealand (ARMCANZ). It has been adopted by Standards Australia under an accreditation agreement with ARMCANZ. (FT-021)
Amendment 1 10 April 2006 Provides implementation of pathology orders and results using HL7 Version 2.3.1 protocol, for communication between health service providers and pathology providers, within and between Australian health care settings. (IT-014)
34pp
AS 4693 Surfaces for sports areasMethods of test AS 4693.12004 Determination of resistance to impact (EN 1517:1999) 2pp
Specifies a method for the determination of resistance to impact of certain surfaces for sports areas. (PL-048)
Specifies how Australasian health care organisations implement the American Standard Health Level Seven Version 2.3 for communication between health service providers and pathology providers, both within and outside hospitals. (IT-014)
AS 46992000 Zinc and zinc alloysDetermination of impurities and alloying elementsAtomic emission spectrometric method 7pp
Sets up a method for the determination of impurities and alloying elements in zinc and zinc alloys by arc/spark atomic emission spectrometry. (CH-010)
AS 4700.3(Int)2007 Electronic messages for exchange of information on drug prescription 68pp (Expires 23 November 2009)
Provides guidance for the implementation of electronic messages for exchange of information on drug prescriptions in the community and hospital environment using the Health Level Seven (HL7) Version 2.5 protocol. Primarily designed for use within and between Australian health care settings. (IT-014)
AS 4700 Implementation of Health Level Seven (HL7) Version 2.5 AS 4700.12006 Patient administration 90pp
Provides guidance for the implementation of patient administration functions using the Health Level Seven (HL7) Version 2.5 protocol. It is primarily designed
192
7pp
Specifies essential safety requirements for polymeric cable protection covers. (EL-004)
10pp
AS 47102001 Packages for chemicals not intended for access or contact with their contents by humans 11pp
Specifies requirements for packages for chemicals, designed to be non-accessible to human beings. Additionally, it specifies requirements for packaging systems which are designed to prevent unintended contact with the contents of the packages. (HE-016)
AS/NZS 4700.3:1999 Electronic messages for exchange of information on drug prescription 51pp
Defines the implementation by Australian and New Zealand health care organisations of the American Standard Health Level Seven Version 2.3 for communication between prescribers, dispensers, funders, regulators, drug information sources and consumers. (IT-014)
Specifies safety requirements for the installation of electrical wiring and equipment in furniture. (EL-004)
AS 47052003 Guide to implementation of an electronic medical claim message for simplified billing in Australia 92pp
Sets out guidelines for an EDI implementation that provides business and technical managers with an understanding of the scope of the simplified billing message for medical services and defines the basic data structure of a medical message for simplified billing. (IT-014)
AS/NZS 4713:2002 UltrasonicsPhysiotherapy systems Performance requirements and methods of measurement in the frequency range 0.5 MHz to 5 MHz (IEC 61689 Ed. 1.0 (Bilingual 1996)) 54pp
Specifies performance requirements for ultrasonic equipment designed for physiotherapy, consisteing of an ultrasonic transducer generating continuous or quasi-continuous wave ultrasonic energy in the frequency range 0.5 MHz and 5 MHz. It mofifies, and has been reproduced from, IEC 61689:1996 with variations for Australia and New Zealand included in a ZZ Appendix. (HE-003)
18pp
Provides guidance for the implementation of communications between immunization service providers and immunization registries, using the Health Level Seven (HL7) Version 2.5 protocol. Primarily designed for use within and between Australian health care settings. (IT-014)
AS 47062001 Pressure gauges for regulators used with compressed gas cylinders 14pp
Specifies requirements for pressure gauges being used with industrial and medical compressed gas cylinders. It covers the high pressure zones where gauges built to AS 1396 may be disadvantaged. This Standard does not apply to fixed delivery LP Gas regulators used for recreational and domestic purposes. (ME-002)
24pp
Describes the implementation of communications between immunization service providers and immunization registries, using the HL7 Version 2.4 protocol for the Australian health industry. (IT-014)
AS 47072006 Chain of custody for certified wood and forest products 29pp
Amendment 1 20 December 2007 The Chain of Custody for Certified Wood and Forest Products Standard (CoC Standard) is a nationally endorsed standard of criteria and requirements that tracks a wood or forest product from its origin in a certified forest through to its end use as a wood or forest product by the consumer. It has been developed with reference to recognised international frameworks for wood and forest product tracking in a supply chain but takes account of local and regional operating conditions. (B-000)
AS/NZS 4714:2000 Ultrasound power measurement in liquids in the frequency range 0.5 MHz to 25 MHz (IEC 61161 Ed. 1.0 (Bilingual 1992), IEC 61161 Amd.1 Ed. 1.0 (Bilingual 1998)) 28pp
Specifies a method of determining the total radiated acoustic power of ultrasonic transducers being used to test the calibration of ultrasound physiotherapy equipment. This Standard is identical with and has been reproduced from IEC 61161:1992 and its first Amendment (1998). (HE-003)
23pp
Gives guidance for the implementation of immunization messages using the Health Level Seven (HL7) Version 2.3.1 protocol, between immunization service providers and registries. (IT-014)
AS 4700.6(Int)2007 Referral, discharge and health record messaging 32pp (Expires 26 October 2009)
Provides guidance for the implementation of communication of clinical patient-centred information between health service providers using the Health Level Seven (HL7) Version 2.5 protocol. Primarily designed for use within and between Australian health care settings. (IT-014)
AS 47082007 Forest managementEconomic, social, environmental and cultural criteria and requirements for wood production (known as The Australian Forestry Standard) 81pp
Specifies performance requirements for economic, social, environmental and cultural criteria that are considered to be most important for ensuring that a forest is well managed. The forest management performance criteria and requirements support continual improvement towards sustainable wood production in Australia. (B-000)
4pp
AS 4708 Supplement 12007 The Australian Forestry StandardGuidance for medium and large native forest ownerships (Supplement 1 to AS 47082007) 61pp
This Supplement provides information and guidance for the verification and implementation of the forest management performance requirements for medium and large native forest ownerships. (B-000)
Specifies a series of screw-neck bottles suitable for the storage of fluid and solid chemicals and reagents in general laboratory use. The bottles are also suitable for the preparation and storage of microbiological growth media. This Standard is identical with and has been reproduced from ISO 4796-1:2000. (CH-001)
55pp
28pp
Amendment 1 19 January 2005 Amendment 2 15 August 2006 Provides implementation of electronic referral messages using the HL7 Version 2.3.1 protocol with local extensions, which will be proposed for inclusion in a later version of HL7 2.x. (IT-014)
AS 4708 Supplement 22007 The Australian Forestry StandardGuidance for medium and large plantation forest ownerships (Supplement 2 to AS 47082007) 52pp
Ensures the development of a management plan or equivalent instruments that establishes a strategic framework for the achievement of the forest management performance requirements of the Standard and compliance with legal, and other requirements to which the organisation subscribes. (B-000)
Provides regulatory authorities, operators and user of security entry systems with a minimum set of requirements for card and terminal interoperability in order to create discrete and multiple identification applications for cardholders on a single card using smart cards, optical memory, magnetic stripe and hybrids. (IT-012)
AS 47212000 Personal privacy practices for the electronic tolling industry 13pp
Specifies the methods of operation and modes of business conduct that should be adopted by operators of electronic toll collection systems and electronic parking station management systems in order to protect the personal privacy of their customers and their customer employees. (IT-023)
AS 4708 Supplement 32007 The Australian Forestry StandardGuidance for small native forest and plantation ownerships (Supplement 3 to AS 47082007) 56pp
Ensures commitment to a structured process for achieving the requirements of the Standard, in particular continuous improvement in management of the defined forest area. (B-000)
AS/NZS 4701:2000 Requirements for domestic electrical appliances and equipment for reconditioning or parts recycling 4pp
Sets out general requirements applying to used domestic appliances intended for sale for reconditioning (reuse), salvaging of parts only (recycling), (or in New Zealand, historic collections), so that an appropriate safety outcome for the public is achieved without preventing the recycling or
AS 47282005 Electric resistance welded steel pipe for pressure purposes 25pp
Amendment 1 23 February 2007 Specifies requirements for three grades of electric resistance welded (ERW) carbon and carbon manganese steel pipe suitable for some pressure purposes. The three grades are designated as 200L0, 240L0 and 290L0, with an outside diameter up to and including 165.1 mm. (ME-001)
AS 47092001 Guide to cleaning and sanitizing of plant and equipment in the food industry 25pp
Sets out cleaning practices to be observed by food industries in order to achieve and maintain a satisfactory level of
193
AS 47322002
AS 47322002 LP Gas fuel systems for marine engines 48pp
Sets out the requirements for liquefied petroleum gas (LP Gas) fuel systems for marine engines for either the propulsion of the craft or for powering auxiliary engines. (ME-046)
ATS 4747.22008 Specification for closed conduit meters fully charged 55pp
Sets out requirements for water meters for use in nonurban applications. It primarily covers metering for irrigation water; however, it is intended that it be used for non-urban water applications other than applications covered by AS 3565.1. (CE-024)
does not override other Standards that may cover these specific areas. (EL-054)
16pp
Sets out procedures for seizure, handling, storage, disposal and destruction of drugs and drug related materials. (HE-006)
AS 47362006 Biodegradable plasticsBiodegradable plastics suitable for composting and other microbial treatment 14pp
Specifies requirements and procedures to determine the compostability, or anaerobic biodegradation, of plastics by addressing biodegradability, disintegration during biological treatment, effect on the biological treatment process and effect on the quality of the resulting compost. (EV-017)
ATS 4747.52008 Installation and commissioning of closed conduit meters fully charged 21pp
Sets out requirements for installation of meters complying with ATS 4747.2 for use in non-urban applications in closed conduit applications. (CE-024)
Specifies the requirements for personal flotation devices (PFDs) with buoyancy classifications of level 275, level 150, level 100 and level 50 suitable for use by adults and children. (CS-060)
AS/NZS 4737:2002 Motor vehicles'I' beam steer axle camber adjustment 5pp
Amendment 1 3 February 2003 Sets out minimum requirements to ensure uniform control of camber adjustment procedures for all motor vehicles fitted with 'I' beam steer axle assemblies, to standardize axle camber adjustment procedures, have manufacturers adopt industry recommended practices and is intended for use where no manufacturer's specified process exists. (ME-053)
22pp
Specifies the methods of test for personal flotation devices (PFDs) with buoyancy classifications of level 275, level 150, level 100 and level 50 suitable for use by adults and children. (CS-060)
AS 47482001 Acoustic emission testing of fibreglassinsulated booms on elevating work platforms 14pp
Describes a procedure for the acoustic emission testing of elevating work platforms incorporating fibreglass-insulated reinforced plastic booms, to establish the structural integrity of the boom. It also specifies rejection criteria. Requirements are given for the test equipment, instrument performance tests and instrument calibration. (MT-007)
AS 47602006 Procedures for specimen collection and the detection and quantitation of drugs in oral fluid 25pp
This Standard sets out requirements and guidance on the mechanisms of incorporation of drugs into oral fluid, factors that might affect drug concentration, procedures for specimen collection, storage, handling, on-site initial testing and, if relevant, dispatch of human oral fluid to the laboratory. (CH-039)
44pp
Amendment 1 30 June 2008 Specifies the general technical delivery requirements for iron and steel castings including the requirements for the preparation of samples and test pieces. (MT-001)
AS 47492007 Non-destructive testingTerminology of and abbreviations for fusion weld imperfections as revealed by radiography 17pp
Describes weld imperfections using, where appropriate, schematic diagrams and reference radiographs as follows: (a) Surface imperfections in the weld or the adjacent parent metal; (b) Internal imperfections in the weld; Also includes abbreviations for the imperfection types. (MT-007)
AS/NZS 4761 Competencies for working with electrical equipment for hazardous areas (EEHA) AS/NZS 4761.1:2008 Competency Standards 126pp
AS 47502003 Electrogalvanized (zinc) coatings on ferrous hollow and open sections 17pp
Specifies requirements for the classification, mass, quality and testing of zinc coatings on welded hollow and open sections produced from electrogalvanized strip. (MT-009)
Specifies the competencies required for work associated with electrical equipment for hazardous areas (commonly termed Ex equipment) and the standards to which competency is to be assessed and attributed. The competencies specified in this Standard are intended as additional competencies to those previously acquired. Applies to all personnel dealing with explosion-protected electrical equipment for hazardous areas (EEHA). (P-012)
109pp
35pp
(P-012)
Specifies service levels for systems, project management and reporting, data collection, data processing and coding to be applied in market and social research projects. (MB-005)
Specifies requirements for the design of steel shoring and trench lining equipment. It does not cover selection or maintenance of trench lining equipment. (ME-082)
AS 4755 Demand response capabilities and supporting technologies for electrical products AS 4755.3.12008 Interaction of demand response enabling devices and electrical products Operational instructions and connections for airconditioners 11pp
Specifies the standard interface between an airconditioner and a Demand Response Enabling Device (DRED) and also a standard set of operational instructions that are intended to reduce the electricity demand of the airconditioner during demand response events, by controlling or constraining its energy consumption. (EL-054)
AS 47622000 General-purpose flat palletsPrincipal dimensions and tolerances (International pallet sizes) (ISO 6780:1988, ISO 6780:1988/Amd 1:1994) 8pp
Provides dimensions and tolerances for International pallet sizes. This Standard is identical with and has been reproduced from ISO 6780:1988 and its Amendment 1:1994. (PK-003)
76pp
ATS 4747 Meters for non-urban water supply ATS 4747.12008 Glossary of terms 11pp
AS 47552007 Framework for demand response capabilities and supporting technologies for electrical products 11pp
Specifies the framework for describing demand response capabilities and supporting technologies for electrical products that offer scope for reduction in energy use and hence power consumption at times of peak demand or other stresses on the electricity supply systems. This Standard
Sets out the glossary of terms required for the use of the ATS 4747, Meters for non-urban water supply, suite of specifications. (CE-024)
This Interim Standard applies to single-phase or polyphase, air-cooled (natural or forced) portable inverters having a rated supply voltage not exceeding 60 V ripple-free d.c. and an alternating current (a.c.) output where the rated output does not exceed 3 kVA; the rated output voltage is within the range 50 500 V a.c; and the rated frequency of the output is within the range 40 100 Hz. It is applicable to isolated inverters, equipotentialy bonded inverters and RCD protected inverters for household and similar use, use on construction sites, or providing an independent supply to electrical installations in buildings, vehicles, caravans, boats and the like. Inverters may be fitted with terminals for the connection of d.c. supply or a external flexible cord fitted with battery clips or an automobile cigarette lighter plug or other d.c. plug. (EL-002)
194
AS/NZS 4771:2000 Technical characteristics and test conditions for data transmission equipment operating in the 900 MHz, 2.4 GHz and 5.8 GHz bands and using spread spectrum modulation techniques (ETS 300 328:1996) 9pp
Amendment 1 11 December 2003 Specifies the minimum radiofrequency requirements for spread spectrum modulated radiocommunications equipment compliance, including essential requirements and test methods for transmitters and receivers operating in the 900 Hz, 2.4 Hz and 5.8 Hz bands. This Standard is an adoption, with national modifications, of ETS 300 328:1996. Appendices set out variations to ETS 300 328 for application in the Australian and New Zealand radiocommunications environment. (RC-006)
phase systems, or 30kVA for three-phase systems, onto the low-voltage electricity distribution network (grid). (EL-042)
10pp
Specifies requirements for inverters with ratings of up to 10kVA for single-phase systems, or 30kVA for three-phase systems, and intended for connection to the low-voltage electricity distribution network (grid). (EL-042)
13pp
AS/NZS 4765:2007 Modified PVC (PVC-M) pipes for pressure applications 35pp
Specifies requirements for pipes, integral joints and postformed bends of PVC-M for the conveyance of water and wastewater under pressure. (PL-021)
AS/NZS 4766:2006 Polyethylene storage tanks for water and chemicals 24pp
Specifies requirements for the design and manufacture of polyethylene storage tanks that are rationally moulded in one-piece seamless construction, for non-buried, vertical installation, and capable of containing water, liquids for food and beverage manufacture and chemical solutions at atmospheric pressure. (PL-046)
Specifies grid protection requirements for inverter energy systems with ratings up to 10kVA for singlephase, or 30kVA for three-phase, systems and intended for connection to the low-voltage electricity distribution network (grid). (EL-042)
AS 4774 Work in compressed air and hyperbaric facilities AS 4774.12003 Work in tunnels, shafts and caissons 51pp
Specifies requirements for medical supervision of personnel, operating procedures, equipment and general precautions for work in tunnels,shafts and caissons where compressed air is the breathing medium and the maximum presssure of the work area is 4 bar (400 kPa) gauge. Appendices include medical standards and examination forms, information for medical practitioners, instructions for persons working in compressed air and information on decompression illness. (SF-046)
AS/NZS 4778:2001 Electromagnetic compatibility for radiocommunications equipment (ETSI EN 300 339 V1.1.1:1998) 35pp
Specifies limits and tests for the assessment of radiocommunication and ancillary equipment with respect to electromagnetic compatibility. This Standard is an adoption, with national modifications, of EN 300 339 1.1.1 (1998). An Annex sets out variations to the ETSI Standard which apply in the Australian and New Zealand radiocommunications environment. (TE-003)
AS/NZS 4768 Digital radio equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz AS/NZS 4768.1:2006 Radiofrequency requirements 21pp
AS/NZS 4782 Double-capped fluorescent lamps Performance specifications AS/NZS 4782.1:2004 General (IEC 60081:2000, MOD) 176pp
Provides radiofrequency requirements for digital radio equipment operating in land mobile and fixed services radiofrequency bands in the frequency range 29.7 MHz to 1 GHz with channel spacings up to 25 kHz. (RC-006)
63pp
Specifies requirements for the design, construction, operation and maintenance of hyperbaric oxygen facilities. Includes equipment requirements, guidance on hazard identification, risk assessment and control and personnel requirements. Appendices include a suggested maintenance schedule, medical examination details, and training for hyperbaric attendants, chamber operators and hyperbaric technical officers. (SF-046)
Specifies performance requirements for doublecapped fluorescent lamps for general lighting service. This document is an adoption of IEC 60081:1997 and includes Amendment 1:2000 and Amendment 2:2003. (EL-041)
AS/NZS 4769 Radiocommunications equipment used in the paging service AS/NZS 4769.1:2000 Angle modulated equipment (ETS 300 224:1998)
65pp
Amendment 1 20 August 2002 Specifies the minimum radiofrequency requirements for angle modulated radio communication equipment intended to operate in the paging service.It includes requirements and test methods for transmitters and receivers. This Standard is an adoption, with national modifications, of ETS 300 224:1998. An appendix sets out variations to ETS 300 224 for application in the Australian and New Zealand radiocommunications environment. (RC-006)
AS/NZS 4776 Liquid-chilling packages using the vapour compression cycle AS/NZS 4776.1.1:2008 Method of rating and testing for performanceRating 7pp
Establishes methods of rating the performance of factory-made liquid-chilling packages using the vapour compression cycle. (ME-086)
AS/NZS 4782.3(Int):2006 Procedure for quantitative analysis of mercury present in fluorescent lamps 14pp (Expired 5 June 2008)
Specifies test method procedure to determine the mercury content in fluorescent lamps. (EL-041)
AS/NZS 4783 Performance of electrical lighting equipment Ballasts for fluorescent lamps AS/NZS 4783.1:2001 Method of measurement to determine energy consumption and performance of ballasts lamp circuits (EN 50294) 20pp
Provides methods of measurement of ballast energy consumption and performance when used with associated fluorescent lamps as part of luminaires and applies to those covered within the scope of IEC 60081 and IEC 60901. The common methods practiced in major parts of the world, Europe in particular are prescribed in this Standard and relevant appendices. The tests specified are derived from EN 50294 with significant restructuring and modifications. The scope of this Standard excludes self-ballasted lamps and does not cover safety requirements. (EL-041)
6pp
Specifies the minimum radiofrequency requirements for amplitude modulated radio communications equipment intended to operate in the paging service and includes essential requirements and test methods for transmitters and receivers operating in the 27 MHz and 40 MHz bands. (RC-006)
AS/NZS 4770:2000 MF and HF radiocommunications equipment in the land mobile service utilizing single sideband suppressed carrier emission 15pp
Amendment 1 7 December 2004 Specifies radiofrequency requirements for medium frequency and high frequency radiocommunications equipment intended to operate in the land mobile services and utilizing single sideband suppressed carrier emission. It specifies minimum requirements for transmitters and receivers for use of the radiofrequency spectrum in accordance with spectrum planning. (RC-006)
AS/NZS 4776.2:2008 Minimum energy performance standard (MEPS) and compliance requirements 20pp
Specifies MEPS levels and compliance paths for liquid-chilling packages that fall within the scope of AS/NZS 4776.1. (ME-086)
AS 4777 Grid connection of energy systems via inverters AS 4777.12005 Installation requirements 12pp
AS/NZS 4783.2:2002 Energy labelling and minimum energy performance standards requirements 14pp
Specifies classification, labelling and minimum energy performance requirements for ballasts for linear fluorescent lamps for use on 230 V to 250 V a.c. at 50 Hz supply. This Standard is to be read in conjunction with AS/NZS 4783.1. (EL-041)
Specifies requirements for the installation of inverter energy systems with ratings up to 10kVA for single-
195
AS 47842003
AS 47842003 Sample preparation for particle size analysis Dispersing procedures for powders in liquids (ISO 14887:2000) 24pp
Sets out procedures for wetting a powder into a liquid, deagglomerating the wetted clumps, determining if solution composition can be adjusted to prevent reagglomeration, selecting dispersing agents to prevent reagglomeration and evaluating the stability of the dispersion against reagglomeration. This Standard is applicable to particles ranging in size from approximately 0.05 to 100 m. This Standard is identical with and has been reproduced from ISO 14887:2000. (CH-032)
AS/NZS 4792:2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process 20pp
Specifies requirements for the mass, quality and testing of hot-dip galvanized coatings applied to hollow sections galvanized on both surfaces in a specialized plant; produced by welding pre-galvanized steel strip; and on external surfaces only, using a continuous (in-line) process. (MT-009)
AS/NZS 4802.1 Supplement 1:1994 Overview of local area network StandardsMedia access control bridges (Supplement to AS/NZS 4802.1:1996) (ISO/IEC 10038:1993) 163pp
Amendment 1 5 November 1997 Defines the architecture for the interconnection of IEEE 802 type LANs below the level of the MAC service, which is transparent to logical link control and higher layer protocols. This Standard is identical with, and has been reproduced from, ISO/IEC 10038:1993. (IT-001)
AS/NZS 4802.1 Supplement 2:1997 Overview of local area network standardsSystem load protocol (Supplement to AS/NZS 4802.1:1996) (ISO/IEC 15802-4:1994) 58pp
Specifies a set of services and protocol for those aspects of management concerned with the loading of systems on IEEE 802 type LANs, and is identical with and has been reproduced from ISO/IEC 158024:1994. (IT-001)
Sets out the product requirements for sawn and milled softwood timber products including type of product, dimensions, moisture content, tolerances, distortions, surface finish, finger-jointing, glue-laminating and end-matching. Grade descriptions are given in Part 2 of this series. (TM-007)
44pp
Sets out the grade descriptions for use with the softwood products specified in Part 1 of this series. The grades are not intended to indicate a ranking of quality. They are primarily used for appearance products. Grade descriptions are given for pinus species and for other softwoods. Cypress species are covered in AS 1810. (TM-007)
AS/NZS 4802.1 Supplement 3:1997 Overview of local area network standardsLAN/MAN management (Supplement to AS/NZS 4802.1:1996) (ISO/IEC 15802-2:1995) 83pp
Specifies an Open Systems Interconnection management-compatible architecture, and service and protocol elements for use in a LAN/MAN environment for performing remote management, and is identical with and has been reproduced from ISO/IEC 158022:1995. (IT-001)
AS 47952002 Double-flanged butterfly valves for waterworks purposes 29pp Available Superseded
Specifies requirements for manually operated resilientseated double-flanged butterfly valves for waterworks purposes, Classes 10, 16, 21 and 35, with a maxiumum operating temperature of 40C. (WS-022)
40pp
Sets out the product requirements and grade descriptions for sawn and milled softwood timber for furniture components. Includes moisture content, tolerances, distortions, surface finish, finger-jointing and glue-laminating. The grades are not intended to indicate a ranking of quality. Grade descriptions are given for pinus species and for other softwoods. Cypress species are covered in AS 1810. (TM-007)
AS 47962001 Water supplyMetal bodied and plastic bodied ball valves for property service connection 26pp
Specifies requirements for metal bodied and plastic bodied ball valves for installation between the reticulation water main and the property water meter in nominal sizes DN 15, DN 20, DN 25, DN 32, DN 40, and DN 50. (WS-022)
239pp
Specifies a description of the functions, features, protocol and services of the logical link control sublayer of the ISO/IEC 8802 LAN protocol. This Standard is identical with and has been reproduced from ISO/IEC 8802-2:1998. (IT-001)
28pp
AS/NZS 4802.3:1999 Carrier sense multiple access with collision detection access method and physical layer specifications (ISO/IEC 8802-3:1996) 517pp
Provides a specification for local area networks employing CSMA/CD as the access method which encompasses several media types and techniques for signal rates from 1 Mb/s to 20 Mb/s, and provides the necessary specification and related parameter values for 10 Mb/s and 1 Mb/s baseband implications. Specifications for 10BASE-T, 10BASE-FP, 10BASE-FB and layer management are also included. This Standard is identical with and has been reproduced from ISO/IEC 8802-3:1996. (IT-001)
Proposes methods for the sanding and finishing of timber floors including strip flooring and parquet. Information is included for specifiers, on the problems of assessing equilibrium moisture content and on the types of coating systems available.. (TM-007)
Specifies requirements for the design and manufacture of non-person man entry polyethylene maintenance shafts intended for buried sewerage systems at depths up to 6m and diameters up to DN300 comprising a moulded chamber and riser in one-piece seamless construction or a moulded base jointed to an extruded pipe shaft manufactured from a compatible material. (PL-006)
19pp
Sets out procedures for specifying and verifying the moisture content of seasoned solid timber. Provides a range of drying quality classes for timber dried in kilns or by other means where the result is a population of timber with a predictable scater of moisture contents. Other drying quality criteria such as checking, collapse and distortion are detailed in an appendix. (TM-007)
AS 47992000 Installation of underground utility services and pipelines within railway boundaries 26pp
Specifies the requirements for the installation, use and maintenance of utility services and pipelines within railway boundaries. (CE-023)
AS 4802.41992 Token-passing bus access method and physical layer specifications (ISO/IEC 8802-4:1990) 257pp
Specifies the electrical and/or optical and physical characteristics of the transmissions medium; specifies the electrical or optical signalling method used; specifies the frame formats transmitted; specifies the actions of a station upon receipt of a frame, and specifies the services provided at the conceptual interface between the medium access control sublayer and the logical link control sublayer above it. This Standard is identical with and has been reproduced from ISO/IEC 8802-4:1990. (IT-001)
AS/NZS ISO 4789:2004 Information and documentationInternational library statistics (ISO 2789:2003) 52pp
Adopts ISO 2789:2003 which provides guidance for the library and information services community on the collection and reporting of statistics. (IT-019)
AS/NZS 4801:2001 Occupational health and safety management systemsSpecification with guidance for use 28pp
Sets out requirements for an occupational health and safety management system. The requirements may be used for auditing and certification purposes. The requirements follow the guidelines set out in AS/NZS 4804:2001. In this joint revision the terms 'hazard/risk assessment' and 'control of hazards/risks' are used to accommodate the different terminology used in each country to describe similar elements of the systematic management of occupational health and safety. (SF-001)
AS/NZS 4790:2006 FurnitureStorage unitsDetermination of strength and durability (ISO 7170:2005) 32pp
Specifies test methods for determining the strength and durability of storage units that are fully assembled and ready for use, including their movable and non-movable parts. (CS-088)
AS/NZS 4802 Information processing systemsLocal area networks AS/NZS 4802.1:1996 Overview of local area network standards (ISO/IEC TR 8802-1:1994) 11pp
Provides an introduction to the set of International Standards which describe local area networks, specifically those which make use of the 48-bit address format. This Standard is identical with and has been reproduced from ISO/IEC TR 8802-1:1994. (IT-001)
AS 4802.51992 Token ring access method and physical layer specifications (ISO/IEC 8802-5:1992) 94pp
Using the token-passing ring access method on a local area network, this Standard defines the frame format and the medium access control protocol. The services provided by the medium access control sublayer and the services provided by the physical layer sublayer are described. The physical layer functions of symbol encoding and decoding, symbol timing and pair attachment of the station to the medium, including the definition of the medium interface connector, are defined. This Standard is identical with, and has been reproduced from, ISO/IEC 8802-5:1992. (IT-001)
AS/NZS 4791:2006 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process 17pp
Specifies requirements for the mass, quality and testing of galvanized coatings applied to ferrous open sections on all surfaces except cut ends, using an in-line process that utilizes specialized equipment. (MT-009)
196
ent information and includes geocoding. Guidelines for the use of the addressing system and examples of addressing are included. (IT-004)
AS/NZS 4810 Medical devicesRisk management AS/NZS 4810.1:2000 Application of risk analysis (ISO 14971-1:1998)
AS 48202006 Bonded abrasive productsPermissible unbalances of grinding wheels as delivered Static testing (ISO 6103:2005) 7pp
Adopts ISO 6103:2005 to specify the maximum permissible values of unbalance for various types of grinding wheels in the as-delivered conditions, with an outside diameter equal to, or greater than 115 mm and with a peripheral speed greater than, or equal to 16 m/s. Also specifies a method for measuring the unbalance and a practical method for determining whether or not a grinding wheel is acceptable. (ME-033)
AS/NZS 4802.12:2000 Demand-priority access method, physical layer and repeater specifications (ISO/IEC 8802-12:1998) 429pp
Specifies the demand-priority access method together with the related physical layer and repeater specifications. This Standard is identical with and has been reproduced from ISO/IEC 8802-12:1998. (IT-001)
17pp
AS/NZS 4804:2001 Occupational health and safety management systemsGeneral guidelines on principles, systems and supporting techniques 46pp
Provides guidance on the development and implementation of occupational health and safety management systems (OHSMS) and principles, and their integration with other management systems. The guidelines are intended for use as a voluntary, internal management tool and are not intended for use by OHSMS certification/registration bodies as a specification Standard. This Standard aligns closely with AS/NZS 4801:2001. (SF-001)
Specifies a procedure for investigating, using available information, the safety of a medical device, including in vitro diagnostic devices or accessories, by identifying hazards and estimating the risks associated with the device. Does not stipulate levels of acceptability nor is it intended to give guidance on all aspects of management of risks. This Standard is identical with and has been reproduced from ISO 14971-1:1998. (M-000)
AS/NZS 4821:2006 Protective footwear for firefighters Requirements and test methods
27pp
Specifies test methods and minimum performance requirements for three (3) types of footwear for firefighters. (SF-049)
9pp
Specifies guidelines in the Employment Screening process for verifying the identity, integrity and credentials of any person entrusted with resources and/or assets in an organization, and can be utilized as a basis for industry or organizational specific screening policies and procedures. It applies equally to organizations in both the private and public sector. (MB-009)
AS/NZS 4805 Accessories for electric cablesTest requirements AS/NZS 4805.1:2007 Power cables with extruded insulation for rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV 29pp
Specifies the type test requirements on accessories for power cables with extruded insulation and with rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV. (EL-003)
AS/NZS 4812:2003 Non-destructive examination and discard criteria for wire ropes in mine winding systems 23pp
Specifies requirements for non-destructive examination and discard of wire ropes of mine winding systems, including winding, hoisting, balance, rubbing, guide and shaft sinking ropes, but excluding full locked-coil ropes. (ME-018)
AS 4823 Feather and downMethods of test AS 4823.12006 Determination of moisture content 3pp
Specifies a procedure to determine the moisture content of an individual sample of feather and down. (CS-035)
202pp
AS/NZS 4805.2:2007 Impregnated paper-insulated metalsheathed cables for rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV (excluding gas-pressure and oilfilled cables) 18pp
Specifies the requirements for type testing of accessories for impregnated paper-insulated metal-sheathed cables with rated voltages from 1.9/3.3 (3.6) kV up to 19/33 (36) kV. (EL-003)
AS/NZS 4815:2006 Office-based health care facilities Reprocessing of reusable medical and surgical instruments and equipment, and maintenance of the associated environment 81pp
Sets out procedures and process development which can be validated for the cleaning, disinfection and sterilization of reusable medical and surgical instruments and equipment, and maintenance of associated environments in officebased health care facilities not involved in complex patient procedures and processes. Suitable for medical, surgical and allied health facilities and skin penetration establishments. May also be suitable for application to the instruments and equipment used exclusively on animals in veterinary practice. Does not apply to day surgical or day procedures centres or items that may be contaminated with prions capable of causing TSEs, e.g. Creutzfeldt-Jakob. (HE-023)
AS 4823.32006 Determination for the quantitative composition of feather and down (manual method) 5pp
Specifies a method for determining the composition of feather and/or down fit for or constituting filled manufactured articles in order to label it or to verify the denominations reported on the label. (CS-035)
AS 4806 Set2008 CCTV Set AS 4806 Closed circuit television (CCTV) AS 4806.12006 Management and operation
136pp
5pp
26pp
Provides recommendations for the management and operation of closed circuit television (CCTV) systems with respect to principles of management, procedures, personnel, control room design, incident response, privacy and disclosure, management of recorded material, documentation, licenses and signage. (EL-051)
AS 4816 Determination of particle size distribution by gravitational liquid sedimentation methods AS 4816.12002 General principles and guidelines (ISO 13317-1:2001)
Specifies a method for obtaining a representative laboratory bulk sample of a lot of feather materials and of feather materials in a manufactured product. (CS-035)
AS 4823.52006 Measuring the sizes of quilts filled with feather and/or down 4pp
Describes a method for the determination of all sizes of read-made quilts filled with weather and/or down. (CS-035)
17pp
77pp
This Standard provides recommendations for the selection, planning and installation of closed circuit television systems comprising camera(s), monitor(s), video recorder(s), switching, control and ancillary equipment for use in security and surveillance applications. (EL-051)
Sets out methods for determining the particle size of particulate materials, typically in the size range 0.5 to 100 m, by gravitational sedimentation in a liquid. This Standard is identical with and has been reproduced from ISO 13317-1:2001. (CH-032)
7pp
Specifies requirements for PAL video characteristics used in closed circuit television (CCTV) equipment and systems with an analogue input or an analogue output or both. (EL-051)
AS/NZS 4824:2006 Protective clothing for firefighters Requirements and test methods for protective clothing used for wildland firefighting (ISO 15384:2003, MOD) 13pp
Adopts ISO 1534:2003 with national modifications to provide the minimum requirements and test methods for assessing protective clothing that is intended to be worn during wildland firefighting and associated activities, where there is a risk of heat and flame. (SF-049)
25pp
Sets out requirements and recommendations for the design, installation, commissioning, operation and remote monitoring of CCTV systems. (EL-051)
197
AS 4826.12001
AS 4826 Geometric Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment AS 4826.12001 Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998) 15pp
Establishes rules for determining when the characteristics of a workpiece or measuring equipment are in conformance or non-conformance with a given tolerance for a workpiece or limits of maximum permissible errors for measuring equipment. This Standard is identical with and reproduced from ISO 142531:1998. (ME-027)
AS 48392001 The safe use of portable and mobile oxy-fuel gas systems for welding, cutting, heating and allied processes 18pp
Specifies requirements for the selection of safe oxy-fuel gas hand-held or portable equipment used in welding, cutting, heating and allied processes. This Standard also details the safe operation and maintenance of this type of equipment. It applies to portable or mobile gas cylinders, inclusive of manifolded packs of cylinders. Reticulated systems and fixed piping, together with equipment, such as permanently mounted flame-cutting machines, are not intended to be covered by this Standard. (ME-002)
AS/NZS 4847 Self-ballasted lamps for general lighting services AS/NZS 4847.1(Int):2008 Test methodsEnergy performance 23pp (Expires 28 March 2010)
Specifies the test methods and conditions for selfballasted compact fluorescent lamps (CFLs) and other gas-discharge lamps with integrated means for controlling starting and stable operation that are intended for domestic and similar general lighting purposes. (EL-041)
AS 48402001 Low pressure regulators for use in industrial compressed gas reticulation systems 18pp
Specifies the requirements of low pressure regulators for use with industrial compressed gas pipelines. The gas pressure in these pipelines is not to exceed 2100 kPa. These low pressure regulators are intended for industrial use, and regulators intended for medical gas pipeline use, together, with fixed delivery LP gas regulators for domestic and recreational purposes, are not covered by this Standard. As a guide and recommendation, regulators for use in beverage dispensing pipelines have been included in this Standard for users in that industry. (ME-002)
AS 4827 Coating defect surveys for buried pipelines AS 4827.12008 Direct current voltage gradient (DCVG) 17pp
(MT-014)
AS/NZS 4847.2(Int):2008 Minimum Energy Performance Standards (MEPS) requirements 8pp (Expires 7 April 2010)
This Interim Standard specifies Minimum Energy Performance Standards (MEPS) requirements for compact fluorescent lamps sold in Australia and New Zealand. (EL-041)
AS 4828 Degradability of plasticsMethods of test AS 4828.22008 Determination of brittle point in plastic film using a tensile elongation test 6pp
(EV-017)
AS 4848 Application specifications for coating systems AS 4848.12006 Single coat inorganic (ethyl) zinc silicate Solvent-borne 4pp
Specifies methods for preparation, application and quality, on fabricated articles and structures. (CH-003)
40pp
Specifies requirements for the hygienic production of fresh and frozen pet meat derived from animals slaughtered and processed at a processing establishment, as well as wild animals killed in their natural environment. This Standard was developed by the Meat Standards Committee (MSC) of the Primary Industries Standing Committee (PISC) formed under the Primary Industries Ministerial Council (PIMC). (FT-021)
AS/NZS 4829:2006 Stand alone retail display devices (retail spinners) 12pp
Specifies stability requirements and strength and stability methods of testing for stand alone retail display devices (retail spinners). (CS-088)
4pp
Specifies performance requirements for permeable synthetic woven and non-woven fabrics used to retard weed growth for agricultural, horticultural, nursery and landscape use for both domestic and commercial applications. (TX-008)
To provide guidelines for cleaning and maintenance for domestic and commercial fabric upholstery. (TX-023)
59pp
AS/NZS 4844 WoolMeasurement of fibre properties AS/NZS 4844.1(Int):2002 Measurement of the fibre length after carding of scoured or carbonised wool 41pp (Expired 24 July 2006)
Amendment 1 14 January 2005 Specifies the method for determining the fibre length after carding of scoured or carbonised wool. (TX-012)
Provides voltage limits and corresponding time constraints acceptable on both underground and above-ground metallic pipelines that may be subject to electrical influences due to the close proximity of high voltage power transmission lines. Guidance on how to calculate the induced voltages and mitigate the hazards is provided. Hazards due to lightning strikes are covered. (EL-001)
AS/NZS 4854:2006 Welding consumablesCovered electrodes for manual metal arc welding of stainless and heat-resisting steelsClassification (ISO 3581:2003) 25pp
Specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the aswelded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels. Identical to, and reproduced from, ISO3581:2003. (WD-002)
AS 48332007 Pressure-sensitive labels for stock-paper, stock-plastic and general purpose use 15pp
Specifies requirements for pressure-sensitive adhesive (PSA) labels for general purpose use for paper-based label stock and plastic-based label stock. (PK-025)
AS/NZS 4844.2(Int):2002 Measurement of the fibre length after carding waste of scoured or carbonised wool 5pp (Expired 24 July 2006)
Amendment 1 14 January 2005 Specifies the method for determining the fibre length after carding waste of scoured or carbonised wool. (TX-012)
AS 48342007 Packaging for surface transport of biological material that may cause disease in humans, animals and plants 14pp
Defines three categories of biological material and specifies requirements for packaging and marking for the surface transport of biological material which may be potentially hazardous to the community and environment. (HE-007)
122pp
AS/NZS 4855:2007 Welding consumablesCovered electrodes for manual metal arc welding of non-alloy and fine grain steelsClassification (ISO 2560:2002) 30pp
Specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld heat-treated condition for manual metal arc welding of non-alloy and fine grain steels with a minimum yield strength of up to 500 N/mm2 or a minimum tensile strength of up to 570 N/mm2. (WD-002)
Provides the health industry with a specific Standard for Health Care Provider Identification for clinical and administrative data management purposes which promotes uniformly good practice in identifying individual providers and recording identifying data; this will assist significantly in ensuring that records relating to each individual provider will be associated with that individual or organization and no other. (IT-014)
AS 48382002 Gas cylindersHigh pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2000) 73pp
Provides minimum requirements for serially produced refillable gas cylinders. (ME-002)
101pp
AS/NZS 4856:2006 Welding consumablesCovered electrodes for manual metal arc welding of creepresisting steelsClassification (ISO 3580:2004) 23pp
Adopts ISO 3580:2004 to specify requirements for classification of covered electrodes, based on the all-weld metal in the heat-treated condition, for manual metal arc welding of ferritic and martensitic creep-resisting and low alloy elevated temperature steels. (WD-002)
Provides the health industry with a specific Standard for Health Care Provider Identification for clinical and administrative data management purposes which promotes uniformly good practice in identifying individual providers and recording identifying data; this will assist significantly in ensuring that records relating to each individual provider will be associated with that individual or organization and no other. (IT-014)
198
AS/NZS 4865 Performance of commercial ice makers and ice storage bins AS/NZS 4865.1:2008 Test methods for ice makers Environmental performance
7pp
Specifies methods of measuring the electrical power consumption of water- and air-cooled commercial ice makers connected to a nominal 230 V mains electricity supply. (ME-008)
9pp
AS/NZS 4865.2:2008 Test methods for ice storage bins Environmental performance
7pp
4pp
Sets out to classify membranes based on elastic properties, which can then be used to give guidance on the type of detailing for a specific membrane referred to in AS 3740. (BD-038)
Specifies the method of measuring the theoretical storage effectiveness of factory-made ice storage bins, including the storage bins of self-contained units and automatic dispensing machines. (ME-008)
Specifies requirements for the design, construction and testing of substations for use in underground coal mines. It does not specify general requirements of electrical equipment for underground coal mines, which are dealt with in Part 1 of this series. (EL-023)
AS/NZS 4859 Materials for the thermal insulation of buildings AS/NZS 4859.1:2002 General criteria and technical provisions 44pp
Amendment 1 28 December 2006 Provides requirements and methods of test for materials that are added to, or incorporated in, opaque envelopes of buildings designed for human occupancy, to provide thermal insulation by moderating the flow of heat through these elements. (BD-058)
This Standard is the first part in a series of Standards addressing safety aspects of sporting goals and provides requirements for the construction, stability and labelling of soccer goals. (CS-101)
AS/NZS 4867 Cigarette lighters AS/NZS 4867.1:2002 General requirements (ISO 9994:1995)
AS/NZS 4871.6:2007 Diesel powered machinery and ancillary equipment 14pp 14pp
Specifies requirements for the design, construction and testing of diesel powered machinery and ancillary equipment for use in underground coal mines. It does not specify general requirements of electrical equipment for underground coal mines, which are dealt with in Part 1 of this Series. (EL-023)
AS 48612004 Aluminium and aluminium alloys Determination of impurities and alloying elementsAtomic emission spectrometric method 9pp
Sets out a method for the determination of impurities and alloying elements in aluminium by arc/spark atomic emission spectrometry. (CH-010)
Provides requirements for cigarette lighters that ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse, in order to reduce potential hazards to users. This Standard is identical with and has been reproduced from ISO 9994:1995. (CS-024)
AS 48622000 Lead and lead alloysDetermination of impurities and alloying elementsAtomic emission spectrometric method 8pp
Sets out a method for the determination of impurities and alloying elements in lead and lead alloys by arc/spark atomic emission spectrometry. (CH-010)
AS 4873 Recommended practice for inductively coupled plasma-mass spectrometry (ICP-MS) AS 4873.12005 Principles and techniques 70pp
17pp
Provides requirements for assessing compliance with the US Consumer Product Safety Commission's requirements for child resistance: 16 CFR CPSC 1210. (CS-024)
AS 4863 Particle size analysisLaser diffraction methods AS 4863.12000 General Principles (ISO 13320-1:1999)
AS 4868 Copper, lead and zinc sulfide concentrates Chemical analysis AS 4868.12008 Determination of gold and silverFire assay gravimetric and flame atomic absorption spectrometric method (ISO 10378:2005) 52pp
Adopts ISO 10378:2005 to provide a method for determining gold and silver in copper, lead and zinc sulphide concentrates. (MN-005)
Sets out principles, techniques and operating procedures involved in the setting up and operation of inductively coupled plasma mass spectrometry for the use of chemical methods of analysis. (CH-016)
AS 48742000 Guide to the investigation of potentially contaminated soil and deposited dust as a source of lead available to humans 21pp
Sets out a procedure for the collection of soil and deposited dust samples to ascertain whether inorganic lead is present in sufficient quantities to cause toxicity in humans. Because infants constitute the most sensitive group as regard sublethal lead toxicity, special emphasis is placed upon collection of samples from areas with which this population group would come into contact. (EV-009)
34pp
Sets out guidance on the measurement of size distributions of particles in any two-phase system, for example powders, sprays, aerosols, suspensions, emulsions and gas bubbles in liquids, through analysis of their angular light scattering patterns. It does not address the specific requirements of particle size measurement of specific products. Applicable to particle sizes ranging from approximately 0.1 m to 3 mm. This standard is identical with and has been reproduced from ISO 13320-1:1999. (CH-032)
AS/NZS 4869 Maritime Survivor Locating Systems (MSLS) AS/NZS 4869.1:2006 Operating on 121.5 MHz 17pp
AS 4876 Motor vehicle frontal protection systems AS 4876.12002 Road user protection 15pp
AS/NZS 4864 Performance of refrigerated beverage vending machines AS/NZS 4864.1:2008 Test methodsEnergy performance 9pp
Provides the minimum requirements for Maritime Survivor Locating Systems (MSLSs) intended for very short-range crew retrieval applications operating on 121.5 MHz commonly referred to as manoverboard systems. (RC-004)
Provides a test method for assessing the efficiency of refrigerated beverage vending machines. (ME-008)
AS/NZS 4871 Set:2007 Electrical equipment for underground coal mines Set 132pp AS/NZS 4871 Electrical equipment for coal mines, for use underground AS/NZS 4871.1:2002 General requirements 41pp
Specifies performance requirements for manufacturers of vehicle frontal protection systems (VFPS) and addresses issues, such as applicable Australian Design Rules requirements, road user protection requirements, test methods and marking and packaging. (ME-083)
AS 4877 Rubber- or plastics-coated fabrics AS 4877.32001 Specification for polyurethane-coated woven fabrics (ISO 7617-3:1988) 6pp
Specifies the methods for testing polyurethane-coated woven fabrics. This Standard is identical with and has been reproduced from ISO 7617-3:1988. (TX-005)
Specifies the general design, manufacturing, testing and performance standards for all electrical equipment intended for use in underground coal mines. (EL-023)
199
AS 4878.22001
AS 4878 Methods of test for coated fabrics AS 4878.22001 Determination of length, width and net mass (ISO 2286-1:1998) 2pp
Specifies the methods for the determination of length, width and net mass of coated fabrics. This Standard is identical with and has been reproduced from ISO 2286-1:1998. (TX-005)
AS/NZS 4879.2(Int):2008 Minimum Energy Performance Standards (MEPS) requirements 5pp (Expires 30 June 2010)
Specifies minimum energy performance requirements for ELV convertor, when tested in accordance with AS/NZS 4870.1. (EL-041)
8pp
AS 4878.32001 Determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998) 6pp
Specifies the methods for the determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate for coated fabrics. This Standard is identical with and has been reproduced from ISO 2286-2:1998. (TX-005)
AS 49032000 (Reusable PDF) General conditions of subcontract for design and construct 82pp
Sets out general conditions of subcontract for design and construct. The Standard is part of the suite of contract conditions based on AS 40001997 and is suitable for design and construct, design development and construct and design novate and construct project procurement methods.
22pp
(WS-022)
AS 48842008 Method of test for determination of histamine levels in fish and fish products/seafoods by fluorometric method 5pp
(FT-024)
3pp
16pp
Specifies the method for the determination of the thickness of coated fabrics. This Standard is identical with and has been reproduced from ISO 2286-3:1998. (TX-005)
Adopts ISO 1135-4:2004 to specify requirements for single use transfusion sets for medical use in order to ensure their compatibility with containers for blood and blood components as well as with intravenous equipment. Also specifies requirements for air-inlet devices for use with rigid containers for blood and blood components. (HE-021)
3pp
Specifies the methods for the determination of the bursting strength of coated fabrics. This Standard is identical with and has been reproduced from ISO 3303:1990. (TX-005)
AS/NZS 4886:2007 Domestic solid fuel burning appliancePellet heatersDetermination of flue gas emission 22pp
Specifies a method for determining the rate of particulate emission from batch fed domestic pellet burning appliances. (CS-062)
AS 49052002 (Reusable PDF) Minor works contract conditions (Superintendent administered) 28pp
Specifies a form of contract to be used for construct only projects of a simple nature. It is not suitable for projects of a complex or long term nature or where a bill of quantities has been prepared. There is also no provision for Seperable Portions or nominated subcontracts. This version of this form of Contract does not provide for its administration by a Principal.
AS 4878.62001 Determination of tensile strength and elongation at break (ISO 1421:1998) 11pp
Specifies the methods for the determination of tensile strength and elongation at break. This Standard is identical with and has been reproduced from ISO 1421:1998. (TX-005)
AS 48972008 The design, installation and operation of underground petroleum storage systems 51pp
Provides requirements and recommendations for the design, installation, operation, maintenance and repair of underground petroleum storage systems. Sets out procedures for inventory control and loss investigation. Based on the Australian Institute of Petroleum (AIP) CP42002. (ME-017)
4pp
Specifies the methods for the determination of the tear resistance of coated fabrics. This Standard is identical with and has been reproduced from ISO 4674:1977. (TX-005)
AS 48992007 Pin insulatorsPorcelain and glass for overhead power linesVoltages greater than 1000 V a.c. 20pp
Specifies requirements for pin insulators for use on overhead lines. (EL-010)
AS 49062002 (Reusable PDF) Minor works contract conditions (Principal administered) 30pp
This Standard is intended to be used for construct-only projects of a simple nature and of limited monetary value. It is not suitable for projects of a complex or long term nature or where a bill of quantities has been prepared. There is also no provision for seperable portions or selected subcontracts.
11pp
66pp
Specifies the methods for the determination of the coating adhesion of coated fabrics. This Standard is identical with and has been reproduced from ISO 2411:2000. (TX-005)
Amendment 1 11 October 2000 Amendment 2 30 March 2005 Provides a set of compatible subcontract conditions involving site work on projects where AS 40001997 is in use as the head contract between the main contractor and the principal. (MB-010)
AS 49102002 General conditions of contract for the supply of equipment with installation 64pp
Amendment 1 30 March 2005 Sets out an agreement for the supply of equipment, including building elements, which is purpose-built or manufactured and which includes installation. (MB-010)
66pp
Provides a set of compatible subcontract conditions involving site work on projects where AS 40001997 is in use as the head contract between the main contractor and the principal.
AS 49102002 (Reusable PDF) General conditions of contract for the supply of equipment with installation 64pp AS/NZS 4911:2003 General conditions of contract for the supply of equipment without installation 48pp
Amendment 1 30 March 2005 Sets out general conditions of contract for the supply of equipment which is purpose-built or manufactured, including equipment such as building elements. Where equipment is being supplied for use at different times or stages, separable portions may be appropriate. If installation is required, AS 49102002 for supply of equipment with installation, should be used. (MB-010)
AS/NZS 4879 Performance of transformers and electronic step-down convertors for ELV lamps AS/NZS 4879.1:2008 Test methodEnergy performance 37pp
AS 49022000 (Reusable PDF) General conditions of contract for design and construct 73pp
Sets out general conditions of contract for design and construct. The Standard is part of the suite of contract conditions based on AS 40001997 and is suitable for design and construct, design development and construct and design novate and construct project procurement methods.
Specifies a test method for determining the energy efficiency of transformers and electronic step-down convertors used with extra-low voltage (ELV) lamps. (EL-041)
AS/NZS 4911:2003 (Reusable PDF) General conditions of contract for the supply of equipment without installation 48pp
Sets out general conditions of contract for the supply of equipment which is purpose-built or manufactured, including equipment such as building elements. Where equipment is being supplied for use at different times or stages, separable portions may be appropriate. If installation is required,
200
AS 49122002 General conditions of contract for the periodic supply of goods 46pp
Amendment 1 30 March 2005 Sets out a contract for the periodic supply of items of goods. This Standard is part of the suite of conditions of contract based on AS 40001997, General conditions of contract. (MB-010)
AS 49122002 (Reusable PDF) General conditions of contract for the periodic supply of goods 46pp
Sets out a contract for the periodic supply of items of goods. This Standard is part of the suite of conditions of contract based on AS 40001997, General conditions of contract.
AS 49192003 (Reusable PDF) General conditions of contract for the provision of asset maintenance and services (Superintendent's version) 52pp
Sets out general conditions of contract for maintenance and other services, and intended to be used where services are generally performed on the premises of the Principal and are administered through a Superintendent. Part of a suite based on AS 40001997 (Where a Superintendent is not engaged, use AS 4920. If a short version is required, use AS 4921). These conditions of contract are not suitable for construction and other non-service projects, professional consulting services or supply of equipment.
AS 4932.22002 Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001) 12pp
Specifies the calculation of average particle size or average particle diameters from a given particle size distribution. This Standard is identical with and has been reproduced from ISO 9276-2:2001. (CH-032)
AS 49202003 General conditions of contract for the provision of asset maintenance and services (Principal's version) 52pp
Amendment 1 30 March 2005 Sets out general conditions of contract for maintenance and other services, and intended to be used where services are generally performed on the premises of the Principal and a Principal's representative is used. Part of a suite based on AS 40001997 (Where a Superintendent is engaged, use AS 4919. If a short version is required, use AS 4921). These conditions of contract are not suitable for construction and other non-service projects, professional consulting services or supply of equipment. (MB-010)
AS 4933 Digital televisionRequirements for receivers AS 4933.12005 VHF/UHF DVB-T television broadcasts 85pp
Provides television receiver manufacturers with the technical specifications and requirements of digital television receivers in order to achieve successful reception from free-to-air DTTB transmissions that comply with the Australian DTTB transmission Standard AS 4599.1 (including current Amendments). (CT-002)
AS 49202003 (Reusable PDF) General conditions of contract for the provision of asset maintenance and services (Principal's version) 52pp
Sets out general conditions of contract for maintenance and other services, and intended to be used where services are generally performed on the premises of the Principal and a Principal's representative is used. Part of a suite based on AS 40001997 (Where a Superintendent is engaged, use AS 4919. If a short version is required, use AS 4921). These conditions of contract are not suitable for construction and other non-service projects, professional consulting services or supply of equipment.
AS/NZS 4934 Incandescent lamps for general lighting service AS/NZS 4934.1(Int):2008 Test methodsEnergy performance 10pp (Expires 7 April 2010)
Specifies test methods for energy performance of tungsten filament and tungsten halogen lamps used in general lighting service. (EL-041)
AS 49212003 General conditions of contract for the provision of asset maintenance and services (Short version) 12pp
Amendment 1 30 March 2005 Sets out a short version of general conditions of contract for maintenance and other services, as part of a suite based on AS 40001997 (See also AS 4919 and AS 4920). Intended to be used where services are generally performed on the premises of the Principal. These conditions of contract are not suitable for construction and other non-service projects, professional consulting services or supply of equipment. (MB-010)
AS/NZS 4934.2(Int):2008 Minimum Energy Performance Standards (MEPS) requirements 11pp (Expires 7 April 2010)
(EL-041)
AS 49212003 (Reusable PDF) General conditions of contract for the provision of asset maintenance and services (Short version) 12pp
Sets out a short version of general conditions of contract for maintenance and other services, as part of a suite based on AS 40001997 (See also AS 4919 and AS 4920). Intended to be used where services are generally performed on the premises of the Principal. These conditions of contract are not suitable for construction and other non-service projects, professional consulting services or supply of equipment.
AS/NZS 4936:2002 Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems 13pp
This Standard specifies the requirements and test methods for air admittance valves including those that are integral with a fixture trap. (WS-002)
AS 49372002 Electronic messages for exchange of claim and related information 23pp
Provides guidance for the implementation of electronic messages for exchange of claim and related information using the UN/EDIFACT Standard. (IT-014)
AS 49172003 (Reusable PDF) Construction management trade contract General conditions 70pp
Sets out general conditions of contract for a construction management trade contract, to be used for trade works. This practical trade document is part of a suite of conditions of contract based on AS 40001997.
AS 49312000 Industrial wire screensTechnical requirements and testing (ISO 14315:1997) 11pp
Defines terms regarding metal wire screens for industrial screening and specific tolerances, requirements and test methods. This Standard is identical with and has been reproduced from ISO 14315:1997. (CH-032)
AS 49392001 Non-reusable personal use containers for the collection and disposal of hypodermic needles and syringes 8pp
Sets out requirements for non-reusable personal use containers intended for the safe collection and disposal of hypodermic needles and syringes. The containers are disposed of with their contents. (HE-001)
AS 49192003 General conditions of contract for the provision of asset maintenance and services (Superintendent's version) 52pp
Amendment 1 30 March 2005 Sets out general conditions of contract for maintenance and other services, and intended to be used where services are
AS 4932 Representation of results of particle size analysis AS 4932.12001 Graphical representation (ISO 9276-1:1998)
AS 49402002 User-applied identification labels for use on fluid bags, syringes and drug administration lines 7pp
Amendment 1 8 January 2003 Sets out requirements for labels which the user attaches for fluid bags, syringes and their administration lines, and adjacent to the injection ports of administration lines, to designate the target tissue that is being treated. Covers colour,
11pp
This Standard sets out rules for the graphical representation of particle size analysis data in histograms, den-
201
AS 49412001
pattern and adhesive qualities as well as some dimensions. The content of the label is not covered in the Standard. (HE-019)
there is a risk of heat and/or flame. This Standard specifies the minimum requirements and test methods for assessing protective clothing that is intended to be worn during structural firefighting and associated activities where there is a risk of heat and/or flame. (SF-049)
6pp
Sets out certain characteristics of the oil of Backhousia citriodora, citral type (lemon myrtle oil), in order to facilitate assessment of its quality. (CH-021)
AS/NZS 4968 Heavy-road vehiclesMechanical coupling between articulated vehicle combinations AS/NZS 4968.1:2003 Design criteria and selection requirements for fifth wheel, kingpin and associated equipment 12pp
Provides the attachment design forces for fifth wheel assembly and equations to determine the required Dvalue of components for various combinations and applies to fifth wheel assemblies used with 50 mm, 75 mm and 90 mm kingpins and associated equipment, used in heavy road vehicles, B-doubles and road trains, in normal use on both sealed and unsealed roads. (ME-053)
28pp
22pp
Specifies an alphabetical listing, with illustrations where appropriate, of terms and definitions from various pressure equipment-related Standards referenced in AS/NZS 1200. (ME-001)
Specifies requirements for air valves for water systems. This Standard is applicable to valves rated at 1600 kPa, 2100 kPa and 3500 kPa for sizes DN 15 to DN 400. (WS-022)
AS/NZS 4957:2002 Medical electrical equipmentDose area product meters (IEC 60580 Ed. 2.0 (English 2000)) 26pp
Specifies the performance and testing of dose area product meters with ionization chambers intended to measure dose area product and/or dose area product rate to which the patient is exposed during medical radiological examinations. It is identical with, and reproduced from, IEC 60580:2000. (HE-008)
AS 49452000 Commercial road vehiclesInterchangeable quick connect/release couplings for use with air-pressure braking systems 8pp
Establishes the dimensional, identification and installation criteria for couplings to improve safety, interchangeability and productivity in the road transport industry (ME-053)
AS/NZS 4968.2:2003 Testing and installation of fifth wheel and associated equipment 12pp
Specifies performance requirements and recommendations for the installation of fifth wheel assemblies. Applies to fifth wheel assemblies used with 50 mm, 75 mm and 90 mm kingpins for articulated vehicle combinations used in heavy road vehicles, B-doubles and road trains, in normal use on both sealed and unsealed roads. (ME-053)
AS/NZS 4961:2003 Electric cablesPolymeric insulatedFor distribution and service applications 27pp
Specifies the construction of a range of cables for distribution and service applications at working voltages up to and including 0.6/1(1.2) kV. This Standard will complement existing Standard AS/NZS 4026. (EL-003)
80pp
Sets out conditions of contract for small scale construction works and forms part of the suite of conditions of contract based on AS 40001997, General conditions of contract. (MB-010)
AS 49622005 Electronic toll collectionTransaction specification for Australian interoperability on the DSRC link 61pp
Provides an agreed scheme of interoperability for toll operators, EFC system integrators and equipment suppliers. The interoperability only relates to the sequences between vehicle and roadside. (IT-023)
80pp
Sets out conditions of contract for small scale construction works and forms part of the suite of conditions of contract based on AS 40001997, General conditions of contract.
AS 4969 Analysis of acid sulfate soilDried samples Methods of test AS 4969.02008 Introduction and definitions, symbols and acronyms 10pp
(EV-009)
AS 49642004 Method for the qualitative identification of asbestos in bulk samples 20pp
Specifies a method for the qualitative identification of asbestos in bulk samples using a number of steps, depending on the sample appearance and composition. Polarized light microscopy is described as the primary detection technique. (CH-031)
1p
Provides a model for a formal instrument of agreement to be used in conjunction with Australian Standard general conditions of contract. (MB-010)
6pp
(EV-009)
1p
Provides a model for a formal instrument of agreement to be used in conjunction with Australian Standard general conditions of contract.
AS/NZS 4965 Performance of close control airconditioners AS/NZS 4965.1:2008 Testing for rating 32pp
AS 49542001 Identification cardsIntegrated circuit(s) cards with contactsNumbering system and registration procedure for application identifiers (ISO/IEC 7816-5:1994) 21pp
Specifies a national numbering system for application identifiers and a registration procedure for application provider identifiers. (IT-012)
Specifies the conditions on which the capacity and energy consumption of factory-made close control airconditioners are based and the test methods to be applied for determining the capacity and efficiency ratings. (EL-015)
AS 4969.32008 Determination of peroxide pH (pHOX), titratable peroxide acidity (TPA) and excess acid neutralizing capacity (ANCE) 13pp
(EV-009)
AS 4955 Transportable gas cylindersCompatibility of cylinder and valve materials with gas contents AS 4955.12003 Metallic materials (ISO 11114-1:1999)
Gives guidance in the compatibility between valve materials, and the identical with and has 11114-1:1997.
AS 4969.42008 Determination of 1 M potassium chloride extractable sulfur (SKCl), calcium (CaKCl) and magnesium (MgKCl) 5pp
(EV-009)
AS/NZS 4966:2002 UltrasonicsPulsed Doppler diagnostic systemsTest procedures to determine performance (IEC/TS 61895 Ed. 1.0 (English 1999)) 26pp
Describes test methods for measuring the performance of pulsed Doppler ultrasound systems, and applies to tests made on overall pulsed Doppler ultrasound system which is not disassembled or disconnected, and to tests made on pulsed Doppler ultrasound systems whether they are standalone or as part of another ultrasound instrument. Electrical safety, acoustic output and electromagnetic compatibility (EMC) are not covered in this technical specification. It is identical with and reproduced from IEC TS 61895:1999. (HE-003)
AS 4969.52008 Determination of peroxide sulfur (SP), calcium (CaP) and magnesium (MgP) 5pp
(EV-009)
43pp
selection and evaluation of metallic gas cylinders and gas content. This Standard is been reproduced from ISO (ME-002)
AS 4969.62008 Determination of acid extractable sulfur in soil residue after peroxide oxidation (SRAS) 6pp
(EV-009)
AS 49672006 Protective clothing for firefighters Requirements and test methods for protective clothing used for structural firefighting 16pp
Amendment 1 6 August 2007 Specifies the minimum requirements and test methods for assessing protective clothing that is intended to be worn during structural firefighting and associated activities where
AS 4969.82008 Determination of hydrochloric acid extractable sulfur (SHCl), calcium (CaHCl) and magnesium (MgHCl) 6pp
(EV-009)
202
AS 4969.102008 Calculation of peroxide oxidizable sulfur (SPOS), reacted calcium (CaA) and reacted magnesium (MgA) 2pp
(EV-009)
AS 4969.112008 Calculation of net acid-soluble sulfur (SNAS), calcium (CaNAS) and magnesium (MgNAS) 2pp
(EV-009)
AS 49832003 Gas fuel systems for forklifts and industrial engines 57pp
Sets out requirements for liquefied petroleum gas (LPG) and compressed natural gas (CNG) fuel systems for engines mounted on industrial equipment, either for the propulsion of the equipment or for driving some auxiliary function. (ME-046)
21pp
Provides methods for determining characteristics of grouts used in the installation of ceramic tiles. (BD-044)
AS/NZS 4994 Temporary roof edge protection for housing and residential buildings AS/NZS 4994.1(Int):2004 General requirements (Expired 30 April 2008) 27pp
AS 49712008 Inspection and integrity monitoring of large steel vertical petroleum storage tanks 8pp
Provides requirements and recommendations of a system of tank inspection and tank monitoring which may provide a basis for ensuring the structural integrity of large petroleum storage tanks of Category 6, as defined in AS 1692. (ME-017)
AS 49852002 Collection and stabilization of urine samples for quantitation of trace and toxic elements 11pp
Sets out procedures for the pre-treatment of the urine containers and procedures for the collection of urine for the determination of antimony, arsenic, bismuth, cadmium, calcium, cobalt, copper, iron, lead, magnesium, mercury, nickel, selenium, thallium and zinc. (CH-036)
AS 4972(Int)2001 Counterbalanced trucks handling freight containers for 6 m (20 ft) length and above Additional stability tests (ISO 10525:1997) 13pp (Expired 17 May 2003)
Amendment 1 17 May 2004 Sets out the additional stability test and requirements for counterbalanced trucks intended for transporting freight containers of 6 m (20 ft) length and above. This Standard has been reproduced from ISO 10525:1997 with modifications for application in Australia in an Appendix. (ME-026)
Amendment 1 3 May 2007 Specifies requirements for the design, manufacture and testing of equipment that is intended to provide protection at the roof edge to workers installing, altering, repairing or removing cladding on housing and residential buildings having roof slopes of not more than 35 to the horizontal. (BD-092)
AS 49872002 Earth-moving machineryTip-over protection structure (TOPS) for compact excavators Laboratory tests and performance requirements (ISO 12117:1997) 14pp
Provides the means for evaluating the load-carrying characteristics of tip-over protection structures (TOPS) under conditions of static loading and prescribes the performance requirements of a representative sample under such loading. This Standard is identical with and has been reproduced from ISO 12117:1997. (ME-063)
21pp
Amendment 1 3 May 2007 Sets out requirements and gives guidance for the selection, installation, use and dismantling of roof edge protection for housing and residential buildings. (BD-092)
AS 49732001 Industrial trucksInspection and repair of fork arms in service on fork-lift trucks (ISO 5057:1993) 2pp
Sets out methods for the inspection and repair of fork arms in service on fork-lift trucks. This Standard is identical with and has been reproduced from ISO 5057:1993. (ME-026)
25pp
(CS-100)
59pp
26pp
AS 49742008 Copper, lead and zinc sulfide concentrates Determination of transportable moisture limitsFlow-table method (ISO 12742:2007) 18pp
Adopts ISO 12742:2007 to provide a method for determining transportable moisture limits for copper, lead and zinc sulphide concentrates. (MN-005)
Specifies requirements for lifting devices able to be connected to a crane hook including spreader beams, magnet lifters, vacuum lifters and friction lifters. (ME-005)
Specifies design and manufacture requirements for a PVCU maintenance shaft (MS) comprising a fabricated or injection-moulded, or both, chamber jointed to an extruded PVC riser. (PL-021)
AS 4992 Ceramic tilesGrouts and adhesives AS 4992.12006 Terms, definitions and specifications for adhesives (ISO 13007-1:2004) 9pp
Amendment 1 15 August 2008 (BD-044)
AS/NZS 5000 Electric cablesPolymeric insulated AS/NZS 5000.1:2005 For working voltages up to and including 0.6/1 (1.2) kV 25pp
Amendment 1 7 December 2006 Specifies the construction, dimensions and test requirements for single- and multicore cables insulated with polymeric materials intended for use at working voltages up to and including 0.6/1 (1.2)kV. It does not apply to polymeric insulated cables for special installations and service conditions or for which there are separate Australian/New Zealand Standards. (EL-003)
AS 49762008 The removal and disposal of underground petroleum storage tanks 20pp
(ME-017)
AS 49772008 Petroleum productsPipeline, road tanker compartment and underground tank identification 14pp
(ME-017)
AS 4992.1(Int)2003 Adhesive: Definitions and specifications 8pp Available Superseded (Expired 4 June 2005)
Amendment 1 27 July 2005 Provides the terminology for the products, working methods and application properties for ceramic tile adhesives. (BD-044)
AS 4978 Quantification, monitoring and reporting of greenhouse gases in forest projects AS 4978.12006 Afforestation and reforestation 17pp
Sets out the key the technical and scientific aspects that underpin an accounting system for carbon sequestered from the atmosphere as a result of afforestation or reforestation. The requirements may be applied to forestry projects undertaken for the purposes of trading or reporting carbon removals within a greenhouse gas abatement program and are sufficiently flexible to be applied to a range of different programs using either Kyoto Protocol-compliant rules or other rules. (EV-015)
31pp
6pp
AS 49792008 Flammable and combustible liquids Precautions against electrostatic ignition during tank vehicle loading 17pp
(ME-017)
Amendment 1 27 July 2005 Sets out methods for determining characteristics for adhesives used in the installation of ceramic tiles, as follows: (a) Determination of open time; (b) Determination of slip; (c) Determination of shear adhesion strength; (d) Determination of tensile adhesion strength; (e) Determination of transverse deformation; and (f) Determination of chemical resistance. (BD-044)
Specifies the construction, dimensions and tests for screened and unscreened multicore control cables for voltages up to and including 450/750 V intended for use in control, supervisory, protection and instrumentation circuits. It does not apply to cables used solely for telecommunication purposes. (EL-003)
203
AS 5006.12002
AS 5006 Silver and silver bearing alloys AS 5006.12002 Determination of silver content (0.1% to 99.9%)Tritrimetric (potentiometric) method 12pp
Sets out a titrimetric procedure for the determination of silver content and silver bearing alloys. This method is applicable to alloys containing 0.1% to 99.9% silver. Total of gold and platinum group metals must be less than 20%. (CH-010)
AS 50102001 Hygienic production of ratite (emu/ostrich) meat for human consumption 31pp
Sets out requirements for the hygienic production of ratite (emu/ostrich) meat for human consumption. This Standard was developed by a technical subcommittee of the Standing Committee on Agriculture and Resource Management (SCARM) under the Agriculture and Resource Management Council of Australia and New Zealand (ARMCANZ). This Standard is also known as SCARM Report No. 71. (FT-021)
AS 5006.22002 Determination of silver content (1% to 99%)Gravimetric (fire assay) method 17pp
Sets out a gravimetric (fire assay) procedure for the determination of silver content in silver bearing alloys. This method is applicable to alloys containing 1% to 99% silver and less than 2% nickel, 0.05% rhodium and 0.05% tungsten. (CH-010)
AS 5013.82004 Meat and meat productsDetection and enumeration of Enterobacteriaceae without resuscitationMPN technique and colony-count technique (ISO 5552:1997) 15pp
Specifies a method for the detection and enumeration of Enterobacteriaceae present in all kinds of meat and meat products, including poultry. (FT-024)
AS 50122003 Determination of particle size distributions Electrical sensing zone method (ISO 13319:2000) 30pp
Describes guidance on the measurement of the size distributions of particles dispersed in an electrolyte solution using the electrical sensing zone method. It does not address the specific requirements of the particle size measurement of specific materials. The method described in the Standard measures particle volumes and reports in the range from 0.6 m to 1600 m. This Standard is identical with and has been reproduced from ISO 13319:2000. (CH-032)
AS 5013.102004 Microbiology of food and animal feeding stuffsHorizontal method for the detection of Salmonella spp. (ISO 6579:2002) 27pp
Amendment 1 15 July 2005 Specifies a horizontal method for the detection of Salmonella, including Salmonella Typhi and Salmonella Paratyphi (FT-024)
11pp
Provides minimum requirements for construction, equipment and rendering operations prescribed in this Standard. This Standard was developed by the Meat Standards Committee (MSC) of the Primary Industries Standing Committee (PISC) of the Primary Industries Ministerial Council (PIMC). It is also known as PISC (SCARM) Report No. 87 which was published as AS 5008:2007 by CSIRO PUBLISHING. (FT-021)
AS 5013 Food microbiology AS 5013.12004 Examination for specific organisms Standard plate count 2pp
Sets out a method for determining the standard plate count (SPC) in a sample of food. (FT-024)
AS 5013.11.12004 Microbiology of food and animal feeding stuffsPreparation of test samples, initial suspension and decimal dilutions for microbiological examinationGeneral rules for the preparation of the initial suspension and decimal dilutions (ISO 6887-1:1999) 5pp
Describes general rules for the aerobic preparation of the initial suspension and of decimal dilutions for microbiological examinations of products intended for human or animal consumption. (FT-024)
10pp
Amendment 1 30 May 2003 Sets out requirements for the hygienic rendering of animal products. This Standard was developed by a technical subcommittee of the Standing Committee on Agriculture and Resource Management (SCARM) under the Agriculture and Resource Management Council of Australia and New Zealand (ARMCANZ). It is also known as SCARM Report No. 76. (FT-021)
AS 5013.22007 Microbiology of food and animal feeding stuffsHorizontal method for the enumeration of Bacillus cereusColonycount technique at 30C (ISO 7932:2004, MOD) 15pp
Specifies a horizontal method for the enumeration of viable presumptive Bacillus cereus by means of the colony-count technique at 30C. (FT-024)
AS 5009 Determination of particle size distribution by centrifugal liquid sedimentation methods AS 5009.12003 General principles and guidelines (ISO 13318-1:2001)
AS 5013.32004 MicrobiologyGeneral guidance for the enumeration of coliformsMost probable number technique (ISO 4831:1991) 11pp
Provides general guideline for the enumeration of coliforms present in products intended for human consumption or feeding of animals, by means of calculation of the most probable number (MPN) after incubation at 30C, 35C or 37C in a liquid medium, this temperature forming the subject of agreement between the parties concerned. (FT-024)
AS 5013.11.22006 Microbiology of food and animal feeding stuffsPreparation of test samples, initial suspension and decimal dilutions for microbiological examinationSpecific rules for the preparation of meat and meat products (ISO 6887-2:2003) 15pp
Specifies rules for the preparation of meat and meat product samples and their suspension for microbiological examination when the samples require a different preparation from the method described in ISO 6887-1. (FT-024)
16pp
Sets out methods for determining the particle size distributions of particulate materials, typically in the size range 0.1 m to 5 m, by centrifugal sedimentation in a liquid. The methods of determining the particle size distribution described in this part of ISO 13318 are applicable to slurries, particulate materials which can be dispersed in liquids and some emulsions. A positive density difference between the discrete and continuous phases is necessary, although centrifugal photosedimentation can be used for emulsions where the droplets are less dense than the liquid in which they are dispersed. This Standard is identical with and has been reproduced from ISO 13318-1:2001. (CH-032)
AS 5013.42004 MicrobiologyGeneral guidance for the enumeration of coliformsColony count technique (ISO 4832:1991) 5pp
Provides general guidelines for the enumeration of coliforms present in products intended for human consumption or feeding of animals, by means of the techniques of counting colonies on a solid medium, after incubation at 30C, 35C or 37C, this temperature forming the subject of agreement between the parties concerned. (FT-024)
AS 5013.11.32006 Microbiology of food and animal feeding stuffsPreparation of test samples, initial suspension and decimal dilutions for microbiological examinationSpecific rules for the preparation of fish and fishery products (ISO 6887-3:2003) 11pp
Specifies rules for the preparation of fish and fishery product samples and their suspension for microbiological examination when the samples require a different preparation from the method described in ISO 6887-1. (FT-024)
15pp
Sets out methods for determining the particle size distribution of particulate materials by means of centrifugal sedimentation in a liquid. The method of determining the particle size distribution described in this part of ISO 13318 is applicable to powders that can be dispersed in liquids, powders that are present in slurry form and some emulsions. Typial particle size range for analysis is from about 0.1 m to 5 m. The method is applicable to powders in which all chemical or physical particles have the same density and comparable shapes and do not undergo change in the suspension liquid. It is usually necessary that the particles have a density higher than that of the liquid. This Standard is identical with and has been reproduced from ISO 13318-2:2001. (CH-032)
AS 5013.52004 Microbiology of food and animal feeding stuffsHorizontal method for the enumeration of microorganismsColony count technique at 30C (ISO 4833:2003) 9pp
Specifies a horizontal method for the enumeration of microorganisms, by counting the colonies growing in a solid medium after aerobic incubation at 30C. (FT-024)
AS 5013.11.42006 Microbiology of food and animal feeding stuffsPreparation of test samples, initial suspension and decimal dilutions for microbiological examinationSpecific rules for the preparation of products other than milk and milk products, meat and meat products and fish and fishery products (ISO 6887-4:2003) 13pp
Specifies rules for the preparation of samples and decimal dilutions for the microbiological examination of food products other than those covered in other parts of ISO 6887. (FT-024)
204
AS 5013.202004 Preparation of test samples for microbiological examinationPoultry and poultry products 9pp
Sets out general instructions and specifies procedures to be followed after taking a laboratory sample from poultry and poultry products, for the purpose of microbiological examination. (FT-024)
AS 5023 Health supply chain messaging AS 5023.12003 Messaging rules and process logic 29pp
AS 5013.212004 Meat and meat productsEnumeration of Pseudomonas spp. (ISO 13720:1995) 6pp
Specifies a method for the enumeration of Pseudomonas spp. present in meat and meat products, including poultry. (FT-024)
Provides messaging guidelines for electronic hospital supply chains in order to support the formal collection, storage and transmission of data within hospital electronic supply chains. Provides an introduction to the Health Supply chain Electronic Business model and gives specific messaging rules and process logic for the nine (9) priority UN/EDIFACT message implementation guidelines for Health. (IT-014)
AS 5023.22003 Datasets
37pp
AS 5013.12.22004 Microbiology of food and animal feeding stuffsHorizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species)Technique using rabbit plasma fibrinogen agar medium (ISO 6888-2:1999, ISO 6888-2:1999/Amd 1:2003) 13pp
Describes a horizontal method for the enumeration of coagulase-positive staphylococci in products intended for human consumption or feeding of animals by counting of colonies obtained on a solid medium (rabbit plasma fibrinogen medium) after aerobic incubation at 35C or 37C. (FT-024)
AS 5013.222004 Meat and meat productsEnumeration of Brochothrix thermosphactaColonycount technique (ISO 13722:1996) 8pp
Specifies a method for the enumeration of viable Brochothrix thermosphacta in all kinds of meat and meat products, including poultry, by means of a colonycount technique. (FT-024)
Provides messaging guidelines for electronic hospital supply chains in order to support the formal collection, storage and transmission of data within hospital electronic supply chains. Provides dataset components for nine priority transactions. (IT-014)
AS 5013.12.32004 Microbiology of food and animal feeding stuffsHorizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species)Detection and MPN technique for low numbers (ISO 6888-3:2003) 11pp
Specifies a horizontal method for the enumeration and detection of coagulase-positive staphylococci, using the most probable number (MPN) technique. (FT-024)
AS 5013.232004 Microbiology of food and animal feeding stuffsHorizontal method for the enumeration of psychrotrophic microorganisms (ISO 17410:2001) 7pp
Specifies a method for the enumeration of psychrotrophic microorganisms by means of the colony-count technique at 6,5C. (FT-024)
AS 5023.52005 Messaging rules and process logic Turnover order, turnover order status, rebate claim, rebate claim response 9pp
Provides the process logic and messaging rules for turnover order, turnover order status, rebate claim and rebate claim response for electronic hospital supply chains in order to support the formal collection, storage and transmission of data within hospital electronic supply chain. (IT-014)
AS 5013.142004 Microbiology of food and animal feeding stuffsGeneral rules for microbiological examinations (ISO 7218:1996, ISO 7218:1996/Amd 1:2001) 50pp
Specifies general instructions for carrying out microbiological examinations in accordance with specific Standards. (FT-024)
119pp
Provides a framework for improving the positive identification of clients in health care organisations. This revision aligns with AS 48462006. (IT-014)
78pp
AS 5023.62005 Dataset contentTurnover order status, rebate claim, rebate claim response 12pp
Provides dataset content for the three transactions: Turnover order status, rebate claim, rebate claim response as described in AS 5023.2 (IT-014)
AS 5013.152006 Microbiology of food and animal feeding stuffsHorizontal method for the detection and enumeration of presumptive Escherichia coliMost probable number technique (ISO 7251:2005) 13pp
Provides general guidelines for the detection and enumeration of presumptive Escherichia coli by means of the liquid-medium culture technique and calculation of the most probable number (MPN) after incubation at 37C, then at 44C. (FT-024)
Provides the health industry with a specific Standard for Health Care Client Identification for clinical and administrative data management purposes which promotes uniformly good practice in identifying individuals and recording identifying data so as to ensure that each individual's health records will be associated with that individual and no other. (IT-014)
AS/NZS 5024(Int):2005 Potting mixes, composts and other matrices Examination for legionellae 15pp (Expires 11 April 2009)
Amendment 1 31 July 2007 Sets out a qualitative test method for testing of potting mixes, composts and other solid matrices for Legionella species. It also provides a quantitative test method which may be performed in addition to the qualitative test, if desired. (FT-020)
AS 50182001 Electronic animal identificationNational coding scheme (ISO 11784:1996, MOD) 3pp
Defines the technical specifications of the structure of the radio-frequency (RF) identification code used to identify animals electronically. (IT-028)
AS 5013.162006 Microbiology of food and animal feeding stuffsHorizontal method for the enumeration of Clostridium perfringens Colony-count technique (ISO 7937:2004) 16pp
Describes a horizontal method for the enumeration of viable Clostridium perfringens. (FT-024)
AS 5025 Essential oilsGeneral guidance on chromatographic profiles AS 5025.12002 Preparation of chromatographic profiles for presentation in Standards (ISO 11024-1:1998) 12pp
Specifies general guidelines on the determination of the chromatographic profile of an essential oil by gas chromatography on a capillary column. This Standard is identical with and has been reproduced from ISO 11024-1:1998. (CH-021)
21pp
Specifies how a transponder is activated and how the stored information is transferred to the transceiver. An annex sets out requirements additional to ISO 11785:1996 for application in Australia. (IT-028)
AS 5013.172004 Milk and milk productsGeneral guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination (ISO 8261:2001) 12pp
Describes general guidelines for the preparation of test samples, initial suspensions and decimal dilutions for the microbiological examination of milk and milk products, including milk-based infant foods. (FT-024)
AS 5025.22002 Utilization of chromatographic profiles of samples of essential oils (ISO 11024-2:1998) 5pp
Provides general guidance on the determination of the compliance of a chromatographic profile of a sample of essential oil under examination with the reference chromatographic profile given in the Standard of that oil. This Standard is identical with and has been reproduced from ISO 11024-1:1998. (CH-021)
205
AS 50272002
AS 50272002 Essential oilsAnalysis by gas chromatography on capillary columnsGeneral method (ISO 7609:1985) 6pp
Specifies a general method for the analysis of essential oils by gas chromatography on capillary columns for the purpose of determining the content of a specific constituent and/or searching for a characteristic profile. This Standard is identical with and has been reproduced from ISO 7609:1985 (Reconfirmed 1998). (CH-021)
AS 50282002 Oil of lavandin Grosso (Lavandula angustifolia Miller x Lavandula latifolia (L.f.) Medikus), French type (ISO 8902:1999) 5pp
Specifies certain characteristics of the essential oil of lavandin Grosso (Lavandula angustifolia Miller x Lavandula latifolia (L.f.) Medikus), French type, in order to facilitate assessment of its quality. This Standard is identical with and has been reproduced from ISO 8902:1999. (CH-021)
Specifies 19 structured information elements which can be used to construct web-based descriptions of information and services, to help Web publishers and communities of interest to provide efficient and userfriendly access to information and services over the Internet. It is to be read in conjunction with AS 5044.2. (IT-021)
65pp
A usage guide for AS 5044.1, the AGLS metadata Standard which explains the semantics of the AGLS elements and qualifiers. It explains in non-technical language how to use AGLS metadata elements to describe resources. It is to be read in conjunction with AS 5044.1. (IT-021)
AS 50292002 Oil of spike lavender (Lavandula latifolia (L.f.) Medikus), Spanish type (ISO 4719:1999) 6pp
Specifies certain characteristics of the oil of spike lavender (Lavandula latifolia (L.f.) Medikus), Spanish type, in order to facilitate assessment of its quality. This Standard is identical with and has been reproduced from ISO 4719:1999. (CH-021)
AS 50452004 Information technologySecurity techniques Specification of TTP services to support the application of digital signatures (ISO/IEC 15945:2002) 53pp
Adopts ISO/IEC 15945:2002 which defines those TTP services needed to support the application of digital signatures for the purpose of non-repudiation of creation of documents. It also defines interfaces and protocols to enable interoperability between entities associated with these TTP services. (IT-012)
AS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications 31pp
Specifies requirements for polyethylene (PE) and polypropylene (PP) pipes and fittings for sewerage and drainage applications, above and below ground, inside and outside of buildings, and intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. Includes requirements for both plain and structured wall pipes and fittings. (PL-006)
AS 50302002 Oil of lavandin Abrial (Lavandula angustifolia Miller x Lavandula angustifolia Medikus), French type (ISO 3054:2001) 8pp
Specifies certain characteristics of the essential oil of lavandin Abrial (Lavandula angustifolia Miller x Lavandula latifolia Medikus), French type, principally produced in France, in order to facilitate assessment of its quality. This Stanadrd is identical with and has been reproduced from ISO 3054:2001. (CH-021)
AS 50662002 Tolerances for ISO metric bolts, screws, studs and nutsProduct grades A, B and C (ISO 4759-1:2000) 58pp
Specifies the tolerances for the principle features of product grades A, B and C metric bolts, screws, studs and nuts, and product grade A tapping screws. This Standard is identical with and has been reproduced from ISO 4759-1:2000. (ME-029)
70pp
Specifies electrical installation requirements for PV arrays with an open circuit voltage of up to 600V d.c. or up to 600V with respect to earth. (EL-042)
AS 50342005 Installation and use of inert gases for beverage dispensing 52pp
Specifies the requirements for the design, location and installation, testing, commissioning, safe use and maintenance of the compressed inert gas or refrigerated liquid equipment and reticulated and portable systems necessary to dispense beverages. (ME-002)
AS 50522007 Compacted (vermicular) graphite cast irons Classification (ISO 16112:2006) 23pp
Adopts ISO 16112:2006 to specify five grades of compacted (vermicular) graphite cast iron which are classified by mechanical properties. (MT-001)
76pp
Provides guidance on what knowledge management is and how it may be implemented using a flexible framework. (MB-007)
AS 50542007 Ausferritic spheroidal graphite cast irons Classification (ISO 17804:2005) 30pp
Adopts ISO 17804:2005 to specify five grades of ausferritic spheroidal graphite cast iron, which are classified by mechanical properties. (MT-001)
AS 50552006 Test method for the resistance of pipe joints to plant root intrusion 5pp
Sets out a method for assessing the ability of pervious joints in sewer and storm water pipe systems to resist plant root intrusion. It is applicable to all joints including those in new and rehabilitated pipelines, including manholes and maintenance shafts. (PL-045)
AS/NZS 5070 Siting and operation of radiocommunications facilities AS/NZS 5070.1:2008 General guidelines for fixed, mobile and broadcasting facilities including fixed location satellite earth stations independent of the operating frequency 51pp
Provides guidance of a general nature for the siting, installation and operation of (RC-006)
AS 50562006 Metallic coatingsPowder metal (and composites) applied by mechanical means at ambient temperature 23pp
Specifies requirements for a coating of zinc mechanically deposited on iron and steel substrates. (MT-009)
AS 50592006 Power station cooling tower water systems Management of legionnaires disease health risk 30pp
Sets out control strategies suitable for the management of legionnaires disease health risk from the cooling tower water systems of power stations connected to the national or
AS/NZS 5070.2:2008 Guidelines for siting of radiocommunications facilities: VHF, UHF and SHF 18pp
Provides guidance for the siting, installation and operation of radiocommunications facilities for fixed, mobile and broadcasting services operating at frequencies above 30 MHz, which are generically known
206
36pp
AS/NZS 5078:2007 Domestic solid fuel burning appliancesPellet heatersMethod for determination of power output and efficiency 16pp
Specifies a method for the determination of the average efficiency and average thermal power output from automatic feed, pellet fuel-burning room heaters, that are intended to burn wood pellets or other suitable solid fuel. (CS-062)
Sets out a rating process for existing bridges, to specify their safe capacity for carrying repeated live loads for their defined remaining service life. (BD-090)
Sets out minimum requirements for the design in limit states format of bridges that are designed to support road and railway traffic loads, tramway (light rail loads), pedestrian, including cycle and wheelchair access, culverts, structural components related to tunnels, retaining structures and sign gantries, and structures built over or adjacent to railways. (BD-090)
AS 5079 Filing cabinets AS 5079.12003 Lateral filing cabinets (ANSI BIFMA X5.2 1997, MOD) 44pp
Provides specifiers and manufacturers with a Standard for the determination of strength, stability, performance characteristics and durability of lateral filing cabinets and to assist purchasing authorities, retailers and users in their selection and evaluation. (CS-088)
AS 5100.1 Supplement 12006 Scope and general principles Commentary (Supplement to AS 5100.1 2004) 21pp
Provides background material and guidance to the application of AS 5100.12004. (BD-090)
AS 5101 Methods for preparation and testing of stabilized materials AS 5101.2.22008 SamplingPreparation of stabilized pavement materials
4pp
(CE-009)
68pp
AS 5079.22003 Vertical filing cabinets (ANSI BIFMA X5.3 1997, MOD) 36pp
Provides specifiers and manufacturers with a Standard for the determination of strength, stability, performance characteristics and durability of vertical filing cabinets and to assist purchasing authorities, retailers and users in their selection and evaluation. (CS-088)
Sets out minimum design loads, forces, load effects and load combinations for the design of concrete and steel bridges in limit states format, including pedestrian bridges and cycle ways. (BD-090)
AS 5101.3.12008 Lime or cement content of uncured stabilized pavement materials (EDTA method) 5pp
(CE-009)
AS 5101.3.22008 Lime or cement content of stabilized pavement materials (EDTA method) 6pp
(CE-009)
AS 50812008 Hydraulically operated automatic control valves for waterworks purposes 29pp
Provides material requirements and performance tests for metallic-bodied hydraulically operated automatic control valves for waterworks purposes, together with default compliance requirements for use by manufacturers and certification bodies. (WS-022)
AS 5100.3 Supplement 12008 Foundations and soil-supporting structuresCommentary (Supplement to AS 5100.32004) 86pp
Sets out the background material and guidance to the application of AS 5100.32004. (BD-090)
AS 5082 Polybutylene (PB) plumbing pipe systems Metric series AS 5082.12007 Metric polybutylene (PB) pipes for hot and cold water applications 11pp
Sets out requirements for materials, dimensions and performance for polybutylene pipe for hot and cold water applications (metric series), including domestic, industrial and agricultural purposes. (PL-006)
57pp
Sets out minimum design and performance requirements for bearings and deck joints for the articulation and accommodation of movements of bridge structures. (BD-090)
AS 51052005 Basis for design of structuresNotations General symbols (ISO 3898:1997) 10pp
Defines standard notations for structural design. (BD-006)
AS 5100.4 Supplement 12006 Bearings and deck jointsCommentary (Supplement to AS 5100.42004) 24pp
Provides minimum requirements for the selection, design and specification of pot, elastomeric and mechanical bearings, plane sliding contact surfaces and deck joints for use in bridge structures. (BD-090)
AS 5100.52004 Concrete
158pp
ATS 50832003 ISO/TS 12033 Electronic imagingGuidance for selection of document image compression methods (ISO/TS 12033:2001) 12pp
Provides technical guidance to enable a user or electronic image management (EIM) integrator to make an informed decision on selecting compression methods for digital images of business documents in order to optimize their storage and use. (MS-004)
Sets out minimum requirements for the design and construction of concrete bridges and associated structures, including members that contain reinforcing steel or tendons, or both, in limit states format. (BD-090)
AS 5200 Technical specification for plumbing and drainage products AS 5200.0002006 Procedures for certification of plumbing and drainage products 24pp
Nominates Standards and Australian Technical Specifications (ATS) for certification of plumbing and drainage products that are generally intended for installation, replacement, repair, alteration and maintenance by authorized persons in works described the Scope of the Plumbing Code of Australia (PCA). (WS-031)
252pp
Sets out minimum requirements for the design of the structural steelwork in bridges in limit states format, including wrought and cast iron structures. (BD-090)
AS 5100.6 Supplement 12007 Steel and composite construction Commentary (Supplement to AS 5100.6 2004) 144pp
Provides background material and guidance to the application of AS 5100.62004. (BD-090)
12pp
Sets out requirements for cisterns that are primarily intended for flushing urinals and deliver volumes as identified in AS/NZS 3500.1. (WS-031)
854pp
6pp
Sets out requirements for plastics-bodied reflux valves, manufactured from PVC-U, that are intended
207
AS 5200.0072008
to prevent the reversal of wastewater flow by means of a resilient-seated disc/flap or other mechanism. (WS-031) stant flow rate, throughout a given pressure differential range. (WS-031)
5pp
AS 5200.037.22008 Flow controllers for use with heated or cold water systems 16pp
(WS-001)
Sets out minimum product requirements for the connection of appliances to the water service and/or sanitary plumbing piping. (WS-031)
6pp
Sets out the requirements and test methods for water hammer arrestors. (WS-031)
ATS 5200.037.22005 Flow controllersFor use in heated or cold water plumbing systems 13pp Available Superseded
(WS-031)
ATS 5200.0122005 In-line valves for use in plumbing water supply systemsMiscellaneous types metallic and non-metallic 9pp
Sets out requirements for miscellaneous type metallic and plastic bodied in-line valves for use in plumbing water supply systems, such as ball, butterfly, diaphragm, globe and plug. (WS-031)
ATS 5200.0402005 Waste pipe connection outlets and gratings, separate or integral 7pp
Sets out requirements for metallic and plastics bodied waste pipe outlets and gratings, separate or integral, for sanitary plumbing applications. (WS-031)
7pp
Sets out requirements for metallic-bodied valves that are connected to the water supply system and primarily utilized for the priming of sanitary traps. (WS-031)
9pp
4pp
Sets out minimum requirements for jointing materials utilized in the installation of water supply plumbing systems. (WS-031)
Specifies requirements for a roll-grooved jointing system that incorporates a ductile iron body coupling with included elastomeric seal to join copper or stainless steel tubes and metallic fittings. (WS-031)
5pp
Provides writers of technical specifications for plumbing and drainage products with guidance and specific requirements for plumbing and drainage products to enable product certification in accordance with the requirements of the Plumbing Code of Australia (PCA). (WS-031)
ATS 5200.4582004 Universal transition fitting Available Superseded ATS 5200.4592004 Waterless urinalsWall hung (Level 1)
6pp
(WS-031)
5pp
12pp
Specifies requirements for self-sealing devices of nominal sizes DN 32, DN 40 and DN 50. (WS-031)
Specifies requirements for cistern outlet valves that are intended for replacement of, or retrofit of, flushing cisterns of the types specified in AS 1172.2. (WS-031)
6pp 8pp
Sets out requirements for the WaterMark certification of waterless wall-hung urinals manufactured from vitreous china, plastic or stainless steel. (WS-031)
ATS 5200.0202004 Flushing valves for water closets and urinalsfor use with mains supply 7pp
Sets out requirements for flushing valves that incorporate air gap pipe disconnections that operate manually or by sensor for mains supply to fixtures such as water closet pans and urinals. (WS-031)
Sets out minimum requirements for prefabricated bathroom modules that include integral components, accessories and fittings, designed for direct connection to the water supply and sanitary drainage system. (WS-031)
7pp
ATS 5200.0212004 Flushing valves for water closets and urinalsfor use with break tank supply 6pp
Sets out requirements for flushing valves supplied from a break tank, which operate manually or by sensor, for connection to fixtures such as water closet pans and urinals. (WS-031)
Sets out requirements for douche seats using water dispensed by a douche spray for the purposes of personal hygiene. (WS-031)
ATS 5200.0522005 Metallic-bodied inlet pressure control valves greater than DN50 7pp
Sets out requirements for the design, construction, testing and performance of metallic-bodied inlet pressure control valves. (WS-031)
ATS 5200.4612004 Stainless steel tubes and mechanical compression fittings for pressure applications 6pp Available Superseded
(WS-031)
7pp
4pp
Sets out requirements for prefabricated cold water storage tanks, which may or may not be intended to have a float control valve. (WS-031)
AS 5200.0532008 Stainless steel pipes and tubes for pressure applications 15pp
Sets out specifications and requirements for stainless steel pipes and tubes in the range of DN 15 to DN 300 used in hot and cold water supply systems. (WS-019)
Sets out requirements and test methods for devices to attenuate positive pressure transients in plumbing stacks, intended for operation within the temperature range of 0C to 40C. (WS-031)
6pp
(WS-031)
7pp
13pp
Sets out requirements for metallic and plastics-bodied valves that are actuated by way of an electric solenoid valve and intended to be installed in the water service. (WS-031)
ATS 5200.0552008 Plastics fittingsConnectors with flexible intermediate joints for drainage and sewerage applications 12pp
(WS-031)
Provides requirements for low pressure automated changeover devices of nominal sizes DN15 and DN20, which enable the interconnection of a pressurized rainwater tank supply and a mains water supply to designated fixtures and outlets. (WS-031)
ATS 5200.0332004 Spraying apparatus/dispensing units with the option of chemical additionsHose connected 5pp
Sets out requirements for hose-connected spraying apparatus/dispensing units that are designed to spray or dispense a mixture other than water at supply or boosted pressures outlets. (WS-031)
5pp
7pp
Sets out minimum product requirements for the connection of appliances to the water service and/or sanitary plumbing piping. (WS-031)
Sets out requirements for automated valves of nominal sizes DN20/25 and nominal working pressure PN16, which enable a change of water supply between a pressurized rainwater tank supply and a water service to designated fixtures and outlets. (WS-031)
ATS 5200.1032004 Water treatment systems (other than those specified in AS/NZS3497) 5pp
Specifies the requirements for water treatment system componentry other than those specified in AS/NZS3497 and establishes the minimum requirements for use on domestic drinking water supply (private or public) and does not preclude its use for commercial or industrial applications. (WS-031)
ATS 5200.037.12006 Flow controllersFor controlling flows in cold or heated water systems 7pp
Describes requirements for pressure-compensating type flow control devices that deliver a fixed and con-
208
7pp
(WS-031)
safety engineering, however, it does not address specific fire models. (FP-018)
ATS 5200.4902007 Cross-linked polyethylene/aluminium/polyethylene-composite pipe systems for pressure applications 11pp
Sets out requirements for macro-composite pipes and associated fittings, generally used for the conveyance of water, in sizes ranging from DN 16 to DN 40. (WS-031)
ATS 5387.42006 Initiation and development of fire and generation of fire effluents (ISO/TR 13387-4:1999) 40pp
Sets out guidance to designers, regulators and fire safety professionals on the use of engineering methods for the prediction of the initiation of fire, the generation of fire effluents and the development of fire inside the room of origin, however, it is not intended as a detailed design guide. (FP-018)
ATS 5200.4712005 Stainless steel tubes and mechanical compression fittings for pressure applicationsAlternative systems 8pp Available Superseded
(WS-031)
ATS 5200.4992008 Inline sewer dosing unit (SDU) ATS 5200.9992005 Developing technical specifications
16pp
(WS-031)
23pp
8pp
Provides requirements and guidance for writing an Australian Technical Specification for WaterMark certification of plumbing and drainage products. (WS-031)
Sets out guidance to designers, regulators and fire safety professionals on the use of engineering methods for the prediction of movement of fire effluents within and outside of a building, however, it is not intended as a detailed design guide. (FP-018)
ATS 5200.4732007 Stainless steel/nano-antibiotic PP-R pipe systems for water supply applications 12pp
Specifies requirements for a composite piping system consisting of a stainless steel outer casing bonded to an inner layer of polypropylene (PP-R), which includes a contact layer of nano-antibiotic material. (WS-031)
93pp
AS ISO 53612004 Anaesthetic and respiratory equipment Tracheal tubes and connectors (ISO 5361:1999) 23pp
Specifies requirements for the dimensions, basic properties and method of size designation of the most commonly used types of oro-tracheal and naso-tracheal tube made of plastics materials and/or rubber (plain and cuffed), and requirements for tracheal tube connectors. It is an adoption with national modifications and has been reproduced from ISO 5361:1999. (HE-019)
ATS 5387.62006 Structural response and fire spread beyond the enclosure of origin (ISO/TR 13387-6:1999) 19pp
Sets out guidance on the use of engineering methods for the prediction of fire spread within and between buildings, and for the prediction of the response of a structure exposed to fire, however, it is not intended as a detailed technical design guide. (FP-018)
AS ISO 5366 Anaesthetic respiratory equipment Tracheostomy tubes AS ISO 5366.12004 Tubes and connectors for use in adults (ISO 5366-1:2000, MOD) 13pp
Specifies requirements for tracheostomy tubes made of plastics materials and/or rubber having inside diameters of 6.5 mm or greater. Such tubes are primarily designed for patients who require anaesthesia, artificial ventilation or other respiratory support, but need not be restricted to these uses. This Standard is an adoption with national modifications and has been reproduced from ISO 5366-1:2000. (HE-019)
ATS 5387.82006 Life safetyOccupant behaviour, location and condition (ISO/TR 13387-8:1999) 39pp
Sets out guidance to designers, regulator and fire safety professionals on the engineering methods available to evaluate the location and condition of the occupants of a building exposed to a fire. (FP-018)
ATS 5200.4782006 Cross-linked polyethylene/Aluminium/Cross-linked polyethylene macro-composite pipe systems for pressure applications 11pp
Describes requirements for macro-composite pipes and associated fittings generally for the conveyance of water in sizes ranging from DN 16 to DN 63. (WS-031)
243pp
ATS 5387 GuidelinesFire safety engineering ATS 5387.12006 Application of fire performance concepts to design objectives (ISO/TR 13387-1:1999) 55pp
Sets out the framework for the provision of an engineered approach to the achievement of fire safety in buildings, based on the quantification of the behaviour of fire and people. (FP-018)
Specifies requirements for consumer piping, flueing, ventilation and appliance installations which are associated with the use or intended use of fuel gases such as town gas, natural gas, liquefied petroleum gas in the vapour phase, tempered liquefied petroleum gas, simulated natural gas or any similar substance. (AG-006)
8pp
Sets out requirements for a metallic bodied safety shut valve for use in hot- and cold-water applications where the maximum operating pressure does not exceed 1400 kPa and the maximum temperature does not exceed 85C. (WS-031)
268pp
13pp
ATS 5387.22006 Design fire scenarios and design fires (ISO/TR 13387-2:1999) 20pp
Sets out guidance on the identification of appropriate design fire scenarios for consideration in fire safety design and provides guidance on the specification of design fires for quantitative analysis in fire safety design of buildings. (FP-018)
Provides requirements for piping and appliance installations that are associated with the use of fuel gases. For metered installations the requirements cover piping systems from the outlet of the billing meter to the inlet of the appliance. For non-metered LP Gas installations, the coverage is from the first regulator on site to the inlet of the appliance. (AG-006)
18pp
8pp
Sets out requirements for a DN 80 or DN 100 plasticsbodied fitting that is utilized as soil waste dump point for mobile toilet waste disposal. (WS-031)
Amendment 1 21 October 2008 Specifies natural durability ratings for timber species, and provides an authoritative source of information on the natural durability of timber. Includes marine-borer resistance classes. (TM-006)
9pp
Sets out requirements for a pressure-compensating tank of up to 60 L capacity, for use within cold water supply systems incorporating water supply pumps or systems with fluctuating pressures. (WS-031)
ATS 5387.32006 Assessment and verification of mathematical fire models (ISO/TR 13387-3:1999) 24pp
Sets out guidance on procedures for assessing and verifying the accuracy and applicability of deterministic mathematical fire models used as tools for fire
209
AS 5605 Supplement 12007 Guide to the safe use of preservative-treated timber 2pp
Copper chrome arsenic (CCA) is a broad spectrum preservative and the treatment protects timber from decay, borer and termite attack. (TM-006)
AS/NZS 5667.7:1998 Guidance on sampling of water and steam in boiler plants (ISO 5667-7:1993) 16pp
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of water samples and steam in boiler plants. It is identical with and has been reproduced from ISO 5667-7:1993. (EV-008)
AS 5605 Supplement 22007 Guide to the safe use of preservative-treated timber 2pp
Alkaline copper quaternary (ACQ) treatment protects timber from decay, borer and termite attack. (TM-006)
AS 5605 Supplement 32007 Guide to the safe use of preservative-treated timber 2pp
Copper azole treatment protects timber from decay, borer, and termite attack. (TM-006)
AS/NZS 5667.8:1998 Guidance on the sampling of wet deposition (ISO 5667-8:1993) 9pp
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples of wet deposition. It is identical with and has been reproduced from ISO 56678:1993. (EV-008)
51pp
AS 5605 Supplement 42007 Guide to the safe use of preservative-treated timber 2pp
Light oil/organic solvent-borne preservatives (LOSPs) contain insecticides for internal use, and combinations of fungicides and insecticides for external use, and sometimes water repellents. (TM-006)
AS/NZS 5667.9:1998 Guidance on sampling from marine waters (ISO 5667-9:1992) 9pp
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples from marine waters. It is technically equivalent to and has been reproduced from ISO 5667-9:1992. (EV-008)
Specifies and gives guidance on the site and site approval, the design, testing and and approval of equipment, the management of the operation, the operating procedures, the emergency provisions and procedures and registration of operating staff of a bumgy jumping operation. (SF-044)
AS 5605 Supplement 52007 Guide to the safe use of preservative-treated timber 2pp
Provides guidelines for the use of creosote and pigmentemulsified creosote (PEC) in order to protect timber against decay, termites and marine borers. (TM-006)
AS/NZS ISO 5901:2004 Information and documentationInternational standard recording code (ISO 3901:2001) 9pp
Adopts ISO 3901:2001 which defines and promotes the use of a standard code for the unique identification of recording. (IT-019)
AS 5605 Supplement 62007 Guide to the safe use of preservative-treated timber 2pp
Bifenthrin is a synthetic pyrethroid that is ideally suited to use as an insecticide for protection of solid timber and veneer-based and wood composite products. Bifenthrintreated timber is only suitable for use in internal applications where protection from termites and other wooddestroying insects is required. (TM-006)
AS/NZS 5911(Int):2005 General guidelines on the verification, validation and assurance of environmental and sustainability reports 14pp (Expired 17 March 2007)
Amendment 1 19 February 2008 Provides guidelines for the conduct and declaration of verification, validation and assurance of an organizations environmental and related performance. (QR-011)
AS/NZS 5667 Water qualitySampling AS/NZS 5667.1:1998 Guidance on the design of sampling programs, sampling techniques and the preservation and handling of samples 51pp
Provides general principles to be applied in the design of sampling programs, general guidance on sampling techniques and guidance on the procedures to be taken to preserve and transport samples for the physical, chemical and radiological analysis of waters and wastewaters, including bottom sediment and sludges, for the purposes of process control, quality characterization, identification of sources of pollution, compliance with water quality guidelines or standards, and other specific reasons. (EV-008)
11pp
Specifies constructional requirements and standard sizes and materials for enclosures suitable for the domestic market. The Standard is intended for use by both the customers (users) and suppliers of meter enclosures. (BD-088)
AS/NZS 5667.4:1998 Guidance on sampling from lakes, natural and man-made (ISO 5667-4:1987) 5pp
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples of water from natural and man-made lakes. It is technically equivalent to and has been reproduced from ISO 5667-4:1987. (EV-008)
AS/NZS 5761:2005 In-service safety inspection and testing Second-hand electrical equipment prior to sale 7pp
This Standard covers the inspection and testing process to be followed prior to sale of a second-hand electrical appliance so that when the appliance re-enters service, protection against hazards to the user, such as such as electrical shock, mechanical injury, or electrical fire is ensured as far as practicable. (EL-036)
AS/NZS 5667.5:1998 Guidance on sampling of drinking water and water used for food and beverage processing (ISO 5667-5:1991) 8pp
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples of drinking water and water used for food and beverage processing. It is identical with and has been reproduced from ISO 5667-5:1991. (EV-008)
AS/NZS 5762:2005 In-service safety inspection and testing Repaired electrical equipment 8pp
This standard covers the testing and inspection process following the repair of electrical appliances so that when the appliance re-enters service, protection against hazards such as electrical shock, mechanical injury, or electrical fire is ensured as far as possible. (EL-036)
AS/NZS 6400:2003 Water efficient productsRating and labelling 21pp Available Superseded
Amendment 1 14 July 2005 Specifies the procedure for water efficient products that are intended for connection to water supplies, to be appropriately rated relative to specified criteria. (WS-032)
AS ISO 58012004 Industrial fansPerformance testing using standardized airways (ISO 5801:1997) 232pp
Specifies methods for the determination of the performance of industrial fans of all types except those designed solely for air circulation, e.g., ceiling fans and table fans. (ME-013)
9pp
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and
210
AS 7240.82007 Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor (ISO 7240-8:2007) 53pp
Specifies requirements, test methods and performance criteria for point multisensor fire detectors that incorporate an electro-chemical cell for sensing CO in combination with one or more heat sensors. (FP-002)
AS ISO 6993.32007 Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa) (ISO 6993-3:2006) 25pp
Adopts ISO 6993-3:2006, which specifies the requirements for full-end load-bearing fittings made of high-impact poly(vinyl chloride) (PVC-HI) intended to be used for the supply of gaseous fuels through buried pipelines having an operating temperature range of 0C up to and including +30C and a maximum operating pressure of 1 mbar (100 kPa). (PL-021)
52pp
AS ISO 70292003 AcousticsStatistical distribution of hearing thresholds as a function of age (ISO 7029:2000) 9pp
Provides descriptive statistics of the hearing threshold for populations of various ages. This Standard is identical with and reproduced from ISO 7029:2000. (AV-003)
Specifies the requirements, methods of test and performance criteria for point-type, resettable flame detectors that operate using radiation from a flame for use in fire detection systems installed in buildings. (FP-002)
AS/NZS ISO 6529:2006 Protective clothingProtection against chemicalsDetermination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) 29pp
Adopts ISO6529:2001 to describe laboratory test methods that enable a determination of the resistance of materials used in protective clothing to permeation by liquid or gaseous chemicals under the conditions of either continuous or intermittent contact. (SF-004)
AS 7240.122007 Line type smoke detectors using a transmitted optical beam (ISO 7240-12:2006) 48pp
Specifies requirements, test methods and performance criteria for line type smoke detectors utilizing the attenuation and/or changes in attenuation of an optical beam, for use in fire detection systems installed in buildings. (FP-002)
AS 7240 Fire detection and alarm systems AS 7240.12007 General and definitions (ISO 7240-1:2005)
AS/NZS ISO 6530:2006 Protective clothingProtection against liquid chemicalsTest method for resistance of materials to penetration by liquids (ISO 6530:2005) 7pp
Adopts ISO 6530:2005 to describe a laboratory test method for the measurement of indices of penetration, absorption and repellency for protective clothing materials against liquid chemicals, mainly chemicals of low volatility. (SF-004)
16pp
Specifies components of fire detection and alarm systems and provides a set of definitions for use in the various parts of the AS 7240 series. (FP-002)
AS 66692007 PlywoodFormwork
50pp
36pp
Provides minimum performance requirements and specifications for the manufacture and application of plywood for use in the specific application of concrete formwork in Australia. (TM-008)
This Standard is the modified adoption of ISO 72402:2003, which provides requirements, test methods and performance criteria for control and indicating equipment (c.i.e.) for use in fire detection and fire alarm systems installed in buildings. (FP-002)
AS/NZS ISO 6709:2008 Standard representation of latitude, longitude and altitude for geographic point locations (ISO 6709:2008) 3pp
Adopts ISO 6709:1983 to provide geographic point location data formats which are universally interpretable and that allow unique identification of points on, above or below the earths surface for the representation of latitude, longitude and altitude for use in data interchange. This Standard provides a variable-length format. (IT-004)
23pp
16pp
Provides requirements for the specification, construction and installation of doors that are required to resist the passage of smoke (FP-019)
Specifies requirements, methods of text and performance criteria for fire alarm routing equipment and for fault warning routing equipment for use in fire detection and fire alarm systems installed in buildings. Identical with and reproduced from ISO7240-21:2005. (FP-002)
AS ISO 6993 Buried, high-impact poly(vinyl chloride) (PVCHI) piping systems for the supply of gaseous fuels AS ISO 6993.12007 Pipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 6993-1:2006, MOD) 22pp
Adopts ISO 6993-1:2006, with modification, to specify the requirements for pipes made of high-impact poly(vinyl chloride) (PVC-HI) intended to be used for the supply of gaseous fuels through buried pipelines having an operating temperature range of 0C up to and including +30C and a maximum operating pressure of 1 bar (100 kPa). (PL-021)
AS 7240.62006 Carbon monoxide fire detectors using electro-chemical cells (ISO 7240-6:2004) 38pp
Specifies requirements and methods of test for point fire detectors using electro-chemical cells that operate using carbon monoxide detection principles for use in fire detection and fire alarm systems installed in the buildings. Identical with and reproduced from ISO7240-6:2004. (FP-002)
AS ISO 7376 Laryngoscopic fittings AS ISO 7376.12002 Conventional hook-on type handle blade fittings (ISO 7376-1:1994) 8pp
Specifies requirements for laryngoscopes and critical dimensions for the junction of any handle and any blade of a hook-on type laryngoscope to allow engagement, lamp illumination and disengagement through multiple cycles. (HE-019)
AS 7240.72004 Point-type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2003, MOD) 51pp
This Standard is the modified adoption of ISO 72407:2003, which provides requirements, test methods and performance criteria for point smoke detectors that operate using scattered light, transmitted light or ionization, for use in fire detection and fire alarm systems installed in buildings. (FP-002)
AS ISO 6993.22007 Fittings for a maximum operating pressure of 200 mbar (20 kPa) (ISO 6993-2:2006) 18pp
Adopts ISO 6993-2:2006, which specifies the requirements for non-end load-bearing fittings made of
211
AS ISO 7376.22002
AS ISO 7376.22002 Miniature electric lampsScrew threads and sockets for conventional blades (ISO 7376-2:1997) 4pp
Specifies requirements for screw threads for miniature electric lamps and lamp sockets used in laryngoscopic blades to allow engagement, lamp illumination and disengagement through multiple cycles. (HE-019)
AS ISO 81852002 Humidifiers for medical useGeneral requirements for humidification systems (ISO 8185:1997) 39pp
Specifies requirements for the safety and performance of humidifiers suitable for inclusion in breathing systems. (HE-019)
AS 8124 Set2007 Safety of toys Set AS/NZS ISO 8124 Safety of toys
151pp
AS/NZS ISO 8402:1994 Quality management and quality assurance Vocabulary (ISO 8402:1994) 13pp Available Superseded
Defines the fundamental terms relating to concepts used in quality-related Standards. Clarifies and standardizes terms as they apply to quality management, including quality control and assurance. Technically identical with and reproduced from the English language component of ISO 8402:1994. (QR-008)
AS ISO 77402004 Instruments for surgeryScalpels with detachable bladesFitting dimensions (ISO 7740:1985) 3pp
Lays down the dimensions of two sizes of fitting features for detachable scalpel blades and the handles with which they are used. (HE-011)
AS/NZS ISO 8124.1:2002 Safety aspects related to mechanical and physical properties (ISO 8124.1:2000, MOD) 80pp
Amendment 1 25 May 2007 This Standard is the adoption of ISO 8124-1:2000 and specifies requirements for construction of children's toys. (CS-018)
AS/NZS 7799 Information security management AS/NZS 7799.2:2003 Specification for information security management systems (BSI 7799.2:2002) 44pp Available Superseded
This standard specifies the requirements for establishing, implementing operating, monitoring, reviewing, maintaining and improving a documented ISMS within the context of the organization's overall business risks. It specifies requirements for the implementation of security controls customized to the needs of individual organizations or parts thereof. (IT-012)
AS 84812000 Information technologyTelecommunications and information exchange between systems DTE to DTE direct connections (ISO/IEC 8481:1996) 8pp
Describes an arrangement for interconnection of data terminal equipment (DTE), without intermediate data circuitterminating equipment (DCE), in terms of electrical, mechanical and functional characteristics. This Standard applies to DTEs with interface circuits standardized in CCITT Recommendation X.24 for transmission over public data networks. The interconnections are restricted to point-topoint connections. This Standard is identical with and reproduced from ISO/IEC 8481:1996. (IT-001)
21pp
Specifies maximum acceptable levels and methods of sampling and extraction prior to analysis for the migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials and from parts of toys, except materials not accessible. (CS-018)
AS 85362006 Infusion sets for single use, gravity feed (ISO 8536-4:2004) 17pp
Adopts ISO 8536-4:2004 to specify requirements for single use gravity feed infusion sets for medical use in order to ensure their compatibility with containers for infusion solutions and intravenous equipment and provides guidance on specifications relating to the quality and performance of materials used in infusion sets and to present designations for infusion set components. (HE-021)
AS 8000 Premium (Set)2004 Premium Corporate Governance Set AS 80002003 (Set Includes 8000, 8001, 8002, 8003, 8004) Corporate governance standards Set AS 8000 CD2006 Corporate Governance CD AS 80002003 Corporate governanceGood governance principles 23pp
Amendment 1 9 November 2004 Specifies a blueprint for the development and implementation of a generic system of governance suitable for a wide range of entities. (MB-004)
AS 8124.42003 Experimental sets for chemistry and related activities (EN 71-4:1998) 7pp
Specifies requirements for the maximum amount of certain substances and preparations used in experimental sets for chemistry and related activities. (CS-018)
AS 8124.52003 Chemical toys (Sets) other than experimental sets (EN 71-5:1993) 12pp
Specifies requirements for the substances and materials used in chemical toys (sets) other than experimental sets. (CS-018)
AS ISO 86012007 Data elements and interchange formats Information interchangeRepresentation of dates and times (ISO 8601:2004) 33pp
Adopts ISO 8601:2004 to specify numeric representation of information regarding date and time fo day. (IT-027)
44pp
AS ISO 86012003 Data elements and interchange formats Information interchangeRepresentation of dates and times (ISO 8601:2000) 29pp Available Superseded
Provides specifications for a numeric representation of information regarding date and time of day. (IT-033)
Provides an outline for a suggested approach to controlling the risk of fraud and corruption within a wide range of entities in all industry sectors and in government. (MB-004)
AS/NZS 8824 Information technologyAbstract syntax notation one AS/NZS 8824.1:1998 Specification of basic notation (ISO/IEC 8824-1:1995, ISO/IEC 88241:1995/Amd 1:1996, ISO/IEC 88241:1995/Cor 1:1996) 105pp
Specifies a standard notation called abstract syntax notation one (ASN.1) that is used for the definition of data types, values and constraints on data types. This Standard is identical with and has been reproduced from ISO/IEC 8824-1:1995, ISO/IEC 88241:1995/Amd.1:1996 and ISO/IEC 88241:1995/Cor.1:1996. (IT-001)
13pp
Adopts EN 71-9:2005 to specify requirements for the migration or content of certain hazardous organic chemical compounds from/in certain toys and toy materials. (CS-018)
AS/NZS 8124.10:2008 Organic chemical compoundsSample preparation and extraction (EN 71-10:2005) 21pp
Adopts EN 71-10:2005 to specify sample preparation and extraction procedures for establishing the release or content of organic compounds from those toys for which requirements exist in AS/NZS 8124.9. (CS-018)
AS/NZS 8824.2:1998 Information object specification (ISO/IEC 8824-2:1995, ISO/IEC 88242:1995/Amd 1:1996)
30pp
Specifies a notation known as abstract syntax notation one (ASN.1) that allows information object classes as well as individual information objects and information object sets thereof to be defined and given reference names. This Standard is identical with and has been reproduced from ISO/IEC 8824-2:1995 and ISO/IEC 8824-2:1995/Amd.1:1996. (IT-001)
212
8pp
Specifies a notation to be used for specifying table constraints (including component relation constraints) and user-defined constraints. This Standard is identical with and has been reproduced from ISO/IEC 88243:1995. (IT-001)
AS/NZS ISO 9003:1994 Quality systemsModel for quality assurance in final inspection and test (ISO 9003:1994) 7pp Available Superseded
Specifies quality system requirements and a quality assurance model for use where a supplier's capability to detect and control the disposition of any product nonconformity during final inspection and test needs to be demonstrated. This Standard is identical with and has been reproduced from ISO 9003:1994. (QR-008)
AS/NZS ISO 9001:2000 Quality management systemsRequirements (ISO 9001:2000) 23pp Available Superseded
Specifies requirements for quality management systems. The requirements are generic, i.e. applicable to organizations regardless of size, type, industry, product or service. A quality management system that meets the requirements of AS/NZS ISO 9001 can be used for internal application by organizations, for certification and for contractural purposes. It focuses on the quality management system's effectiveness in meeting customer requirements, and may be used to demonstrate the ability to meet customer requirements, prevent nonconformity and address customer satisfaction and quality improvement. This Standard is identical with and has been reproduced from ISO 9001:2000. Those organizations which have used AS/NZS ISO 9002:1994 and AS/NZS ISO 9003:1994 in the past may use AS/NZS ISO 9001:2000 by excluding certain requirements, in accordance with Clause 1.2 of the Standard. To assist organizations currently using them to make the transition to AS/NZS ISO 9001:2000, the Joint Australian/New Zealand Standards AS/NZS ISO 9001:1994, AS/NZS ISO 9002:1994 and AS/NZS ISO 9003:1994 will remain available superseded standards until December 2003. (QR-008)
AS/NZS 8825 Information technologyASN.1 encoding rules AS/NZS 8825.1:1998 Specification of basic encoding rules, canonical encoding rules and distinguished encoding rules (ISO/IEC 8825-1:1995, ISO/IEC 88251:1995/Cor 1:1996) 30pp
Specifies the definition of encoding rules that may be applied to values of types defined using the ASN.1 notation. It is implicit in the specification of these encoding rules that they are also to be used for decoding. This Standard is identical with and has been reproduced from ISO/IEC 8825-1:1995 and ISO/IEC 88251:1995/Cor.1:1996. (IT-001)
AS/NZS ISO 9004:2000 Quality management systemsGuidelines for performance improvements (ISO 9004:2000) 56pp
Provides guidance on applying quality management systems to the achievement of performance improvement. This extends beyond the requirements of AS/NZS ISO 9001 to the overall performance of the organization and the satisfaction of customers and other interested parties. This Standard is identical with and has been reproduced from ISO 9004:2000. (QR-008)
AS ISO/IEC 9075 Information technologyDatabase languages SQL AS ISO/IEC 9075.12005 Framework (SQL/Framework) (ISO/IEC 9075-1:2003)
72pp
AS/NZS ISO 9001:2000 (SP) Quality management systemsRequirements (ISO 9001:2000) 23pp Available Superseded
Specifies requirements for quality management systems. The requirements are generic, i.e. applicable to organizations regardless of size, type, industry, product or service. A quality management system that meets the requirements of AS/NZS ISO 9001 can be used for internal application by organizations, for certification and for contractural purposes. It focuses on the quality management system's effectiveness in meeting customer requirements, and may be used to demonstrate the ability to meet customer requirements, prevent nonconformity and address customer satisfaction and quality improvement. This Standard is identical with and has been reproduced from ISO 9001:2000. Those organizations which have used AS/NZS ISO 9002:1994 and AS/NZS ISO 9003:1994 in the past may use AS/NZS ISO 9001:2000 by excluding certain requirements, in accordance with Clause 1.2 of the Standard. To assist organizations currently using them to make the transition to AS/NZS ISO 9001;2000, the Joint Australian/New Zealand Standards AS/NZS ISO 9001:1994, AS/NZS ISO 9002:1994 and AS/NZS ISO 9003:1994 will remain available superseded standards until December 2003. This is a special ruggedized edition of AS/NZS 9001:2000, printed on waterproof, washable stock, reduced in size to A5, and ring-bound. It is particularly intended for both internal and external auditors, or in any location where ordinary paper would be subject to damp, grease, oil or other soiling. Its smaller size and ring-binding make it especially suited for practical applications. (QR-008)
Adopts ISO/IEC 9075-1:2003 which describes the conceptual framework used in other parts of ISO/IEC 9075 to specify the grammar of SQL and the result of processing statements in that language by an SQLimplementation. (IT-027)
1245pp
AS ISO 89302005 General principles on reliability of structures List of equivalent terms (ISO 8930:1987) 11pp
Defines a set of terms and definitions for use in structural design. (BD-006)
Adopts ISO/IEC 9075-2:2003 which defines the data structures and basic operations on SQL-data. It provides functional capabilities for creating, accessing, maintaining, controlling, and protecting SQL-data. (IT-027)
139pp
395pp
AS/NZS ISO 9000:2006 Quality management systemsFundamentals and vocabulary (ISO 9000:2005) 29pp
Provides guidance on the fundamentals of quality management systems as described in the ISO 9000 series of Standards and vocabulary of terms used in quality management. This Standard is identical with and has been reproduced from ISO 9000:2005, which incorporates the changes accepted in the ISO Draft Amendment, ISO/DAM 9000:2004. (QR-008)
Adopts ISO/IEC 9075-3:2003 which defines the structures and procedures that may be used to execute statements of the database language SQL from within an application written in a standard programming language in such a way that procedures used are independent of the SQL statements to be executed. (IT-027)
AS/NZS ISO 9000 Quality management and quality assurance Standards AS/NZS ISO 9000.2:1998 Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 (ISO 9000-2:1997) 64pp
Provides guidelines to assist users in understanding and applying the requirements of AS/NZS ISO 9001, 9002 and 9003 and to improve consistency in their interpretation and application. This Standard is technically equivalent to and has been reproduced from ISO 9000-2:1997. Includes an Australian/New Zealand appendix which provides additional guidance in the form of a series of questions which address the requirements of ISO 9001. (QR-008)
AS/NZS ISO 9001:1994 Quality systemsModel for quality assurance in design, development, production, installation and servicing (ISO 9001:1994) 11pp Available Superseded
Specifies quality systems requirements for use when conformance to specified requirements is to be assured by the supplier during design, development, production, installation and servicing. It provides a quality assurance model suitable for demonstration by a supplier of its capability and for assessment by external parties. This Standard is identical with and has been reproduced from ISO 9001:1994. (QR-008)
AS ISO/IEC 9075.52005 Host Language Bindings (SQL/Bindings) (ISO/IEC 9075-5:1999, ISO/IEC 90755:1999/Amd 1:2001, ISO/IEC 90755:1999/Cor 2:2003) 317pp
Adopts ISO/IEC 9075-5:1999 which specifies syntax for embedding SQL-statements in a compilation unit that otherwise conforms to the standard for a particular programming language (host language). (IT-027)
390pp
AS/NZS ISO 9002:1994 Quality systemsModel for quality assurance in production, installation and servicing (ISO 9002:1994) 10pp Available Superseded
Specifies quality system requirements for use when conformance to specified requirements is to be assured by the supplier during production, installation and servicing. It provides a quality assurance model suitable for the demon-
213
AS ISO/IEC 9075.112005
AS ISO/IEC 9075.112005 Information and Definition Schemas (SQL/Schemata) (ISO/IEC 9075-11:2003) 286pp
Adopts ISO/IEC 9075-11:2003 which describes the structure and integrity constraints of SQL-data and the security and authorization specifications relating to SQL-data. (IT-027) rating at least one machine port, and describes test methods for their evaluation. (HE-019) group level and interchange level security for authenticity, integrity and non-repudiation of origin, in accordance with established security mechanisms. (IT-033)
AS ISO 9360.22003 HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml (ISO 9360-2:2001) 7pp
Specifies certain requirements and test methods for heat and moisture exchangers without machine connector ports, including those incorporating breathing system filters. These devices are intended for the humidification of respired gases for tracheostomized patients having a tidal volume of 250 ml or greater. (HE-019)
AS ISO 9735.62003 Secure authentication and acknowledgement messagemessage typeAUTACK (ISO 9735-6:2002) 28pp
Defines the secure authentication and acknowledgement message AUTACK. (IT-033)
AS ISO/IEC 9075.132005 SQL Routines and Types Using the JavaTM (Programming Language (SQL/JRT) (ISO/IEC 9075-13:2003) 192pp
Adopts ISO/IEC 9075-13:2003 which specifies the ability to invoke static methods written in the JavaTM (programming language as SQL-invoked routines to use classes defined in the Java programming language as SQL structured user-defined types. (IT-027)
AS ISO 96242008 Polyethylene (PE) pipes for fluids under pressureMating dimensions of flange adapters and loose backing flanges (ISO 9624:1997, MOD) 8pp
Proposes a Standard specifying the mating dimensions of flange adaptors of thermoplastic materials and the corresponding dimensions of loose backing flanges to be used with thermoplastic pipes under pressure. Proposed as an Australian Standard (PL-006)
AS ISO 9735.72003 Security rules for batch EDI confidentiality (ISO 9735-7:2002)
18pp
Addresses message/package level, group level and interchange level security for confidentiality in accordance with established security mechanisms. (IT-033)
6pp
AS/NZS ISO/IEC 9126 Software engineeringProduct quality AS/NZS ISO/IEC 9126.1:2005 Quality model (ISO/IEC 9126-1:2001)
AS ISO 9703 Anaesthesia and respiratory care alarm signals 25pp AS ISO 9703.12002 Visual alarm signals (ISO 9703-1:1992)
Specifies syntax rules for associated data in EDI to be interchanged between computer application systems. This provides a method to transfer data which cannot be carried by means of either a batch or interactive EDIFACT message. The data may be created by other applications (such as STEP, CAD, etc). (IT-033)
Describes a two-part model for software product quality: a) internal quality and external quality, and; b) quality in use. (IT-015)
3pp
Specifies the characteristics of visual alarm signals for use in anaesthesia and respiratory care. (HE-019)
AS ISO 9735.92003 Security key and certificate management messagemessage typeKEYMAN (ISO 9735-9:2002) 22pp
Defines the security key and certificate management message KEYMAN. (IT-033)
86pp
6pp
Defines external metrics for quantitatively measuring external software quality in terms of characteristics and subcharacteristics defined in ISO/IEC 9126-1, and is intended to be used together with ISO/IEC 9126-1. (IT-015)
Specifies the characteristics of auditory alarm signals for use in anaesthesia and respiratory care. (HE-019)
110pp
Specifies the syntax service directories of all parts of the ISO 9735 series. (IT-033)
AS ISO 97052003 Fire testsFull-scale room test for surface products (ISO 9705:1993) 31pp
Specifies a test method that simulates a fire that starts in a corner of a small room with a single open doorway, under well-ventilated conditions. The method is intended to evaluate the contribution to fire growth provided by a surface product using a specified ignition source. (FP-018)
AS/NZS ISO/IEC 9798 Information technologySecurity techniques Entity authentication AS/NZS ISO/IEC 9798.2:2008 Mechanisms using symmetric encipherment algorithms (ISO/IEC 9798-2:1999, ISO/IEC 97982:1999/Cor 1:2004) 12pp
Adopts ISO/IEC 9798-2:1999 which specifies entity authentication mechanisms using symmetric encipherment algorithms. (IT-012)
62pp
Defines internal metrics for quantitatively measuring external software quality in terms of characteristics and subcharacteristics defined in ISO/IEC 9126-1, and is intended to be used together with ISO/IEC 9126-1. (IT-015)
59pp
Defines quality in use metrics for the characteristics defined in ISO/IEC 9126-1, and is intended to be used together with ISO/IEC 9126-1. (IT-015)
AS ISO 9735 Electronic data interchange for administration, commerce and transport (EDIFACT) Application level syntax rules (Syntax version number: 4, Syntax release number: 1) AS ISO 9735.12003 Syntax rules common to all parts (ISO 9735-1:2002)
AS/NZS ISO/IEC 9798.3:2008 Mechanisms using digital signature techniques (ISO/IEC 9798-3:1998) 6pp
Adopts ISO/IEC 9798-3:1999 which specifies entity authentication mechanisms using digital signatures based on asymmetric techniques. (IT-012)
AS ISO 9239 Reaction to fire tests for floor coverings AS ISO 9239.12003 Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002) 24pp
Specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames for all types of flooring. Results obtained by this method reflect the performance of the flooring, including any substrate, if used. Includes details of assessing smoke development and information on the precision of the test method. (FP-018)
32pp
Specifies common syntax rules for the formatting of batch and interactive messages to be interchanged between computer application systems. (IT-033)
4pp
AS/NZS ISO/IEC 9798.4:2008 Mechanisms using a cryptographic check function (ISO/IEC 9798-4:1999) 7pp
Adopts ISO/IEC 9798-4:1999 which specifies entity authentication mechanisms using a cryptographic check function. (IT-012)
Specifies syntax rules specifically for the formatting of batch messages to be interchanged between computer application systems. (IT-033)
AS ISO 9735.32003 Syntax rules specific to interactive EDI (ISO 9735-3:2002) 22pp
Specifies syntax rules specifically for the transfer of interactive messages to be interchanged between computer application systems. (IT-033)
AS ISO 9360 Anaesthetic and respiratory equipmentHeat and mositure exchangers (HMEs) for humidifying respired gases in humans AS ISO 9360.12003 HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000) 19pp
Specifies certain requirements for heat and moisture exchangers, including those incorporating breathing system filters, intended for the humidification of respired gases for use primarily with patients with a tidal volume equal to or greater than 250 ml, and incorpo-
AS ISO 9735.42003 Syntax and service report message for batch EDImessage typeCONTRL (ISO 9735-4:2002) 10pp
Defines the syntax and service report message for batch EDI, CONTRL. (IT-033)
AS/NZS ISO/IEC 9798.6:2006 Mechanisms using manual data transfer (ISO/IEC 9798-6:2005) 20pp
Adopts ISO/IEC 9798-6:2005 for use within networks of communicating devices for information security specialists to perform an entity authentication procedure using a channel which may be subject to both passive and active attacks. (IT-012)
AS ISO 9735.52003 Security rules for batch EDIauthenticity, integrity and non-repudiation of origin (ISO 9735-5:2002) 38pp
Specifies syntax rules for EDIFACT security. It provides a method to address message/package level,
AS ISO 99182004 Capnometers for use with humans Requirements (ISO 9918:1993)
23pp
Specifies requirements for the safety of capnometers used with adults, children and neonates. Identical with and re-
214
AS ISO 99192004 Pulse oximeters for medical use Requirements (ISO 9919:1992)
AS ISO 100152006 Quality managementGuidelines for training (ISO 10015:1999, MOD) 14pp
Provides a basis for developing an understanding of competency needs analysis, design and planning of training, delivery of training and evaluation and monitoring of learning and development outcomes. (QR-002)
AS ISO 103032004 (CD-ROM) Industrial automation systems and integrationProduct data representation and exchange
This CD-ROM includes AS ISO 10303.2042004, AS ISO 10303.2092004, AS ISO 10303.2102004, AS ISO 10303.2122004, AS ISO 10303.2142004, AS ISO 10303.2162004, AS ISO 10303.2242004, AS ISO 10303.2252004, AS ISO 10303.2272004, and AS ISO 10303.2322004. (IT-006)
16pp
Specifies requirements for the safety of pulse oximeters, intended for use in the approximate measurement of the saturation of human arterial haemoglobin, non-invasively. Identical with and reproduced from ISO 9919:1992. (HE-019)
AS ISO 100022006 Customer satisfactionGuidelines for complaints handling in organizations (ISO 10002:2004, MOD) 23pp
Adopts ISO 10002:2004 to provide guidance on the process of complaints handling related to products within an organization, including planning, design, operation, maintenance and improvement. (MB-015)
AS ISO 100172006 Guidance on statistical techniques for ISO 9001:2000 (ISO/TR 10017, Ed. 2.0 (2003) MOD) 40pp
Provides guidance on the selection of appropriate statistical techniques that may be useful to an organization in developing, implementing, maintaining and improving a quality management system in compliance with ISO 9001. (QR-008)
AS 10303 Industrial automation systems and integrationProduct data representation and exchange AS 10303.11998 Overview and fundamental principles (ISO 10303-1:1994) 17pp
Specifies a representation of product information along with the necessary mechanisms and definitions to enable product data to be exchanged. It is identical with and has been reproduced from ISO 103031:1994. (IT-006)
AS/NZS ISO 10005:2006 Quality management systemsGuidelines for quality plans (ISO 10005:2005) 23pp
Provides guidelines for the development, review, acceptance and revision of quality plans. It is focused primarily on product realization, and is not a guide to organizational quality management system planning. Identical with, and has been reproduced from, ISO 10005:2005. (QR-008)
AS ISO 100192005 Guidelines for the selection of quality management system consultants and use of their services (ISO 10019:2005) 13pp
Adopts ISO10019:2005 to provide guidance for the selection of quality management system consultants and the use of their services. (QR-008)
AS ISO/IEC 10118 Information technologySecurity techniques Hash-functions AS ISO/IEC 10118.12006 General (ISO/IEC 10118-1:2000)
AS 10303.111998 Description methods: The EXPRESS language reference manual (ISO 10303-11:1994) 208pp
Specifies the EXPRESS language which is a formal information requirements specification language. It is identical with and has been reproduced from ISO 10303-11:1994. (IT-006)
AS ISO 100062003 Quality management systemsGuidelines for quality management in projects (ISO 10006:2003) 27pp
Provides guidance on qualty system elements, concepts and practices for which the implementation is important to, and has impact on, the achievements of quality in project management and supplements the guidance given in AS/NZS ISO 9004. It is identical with and has been reproduced from ISO 10006:2003. (QR-008)
7pp
Adopts ISO/IEC 10118-1:2000 to specify hashfunctions and is therefore applicable to the provision of authentication, integrity and non-repudiation services. This part contains definitions, symbols, abbreviations and requirements, that are common to all other parts. (IT-012)
AS 10303.121999 Description methods: The EXPRESS-I language reference manual (ISO/TR 10303-12:1997) 111pp
Specifies elements of the EXPRESS-I language. This language is a formal data representation and abstract test case specification which can be used to exemplify the information requirements of other Parts of AS 10303 and is a companion to the EXPRESS and EXPRESS-G languages. This Standard is identical with and has been reproduced from ISO/TR 1030312:1997. (IT-006)
AS ISO 100072003 Quality management systemsGuidelines for configuration management (ISO 10007:2003) 10pp
Provides guidance on the use of configuration management in industry, its applications such as in identification and control of characteristics over the life cycle of a product or project, and its relationship with other management systems and procedures. It is identical with and has been reproduced from ISO 10007:2003. (QR-008)
AS ISO/IEC 10118.22006 Hash-functions using an n-bit block cipher (ISO/IEC 10118-2:2000) 19pp
Adopts ISO/IEC 10118-2:2000 to specify hashfunctions which make use of an n-bit block cipher algorithm. They are therefore suitable for an environment in which such an algorithm is already implemented. (IT-012)
AS/NZS ISO 10012:2004 Measurement management systems Requirements for measurement processes and measuring equipment (ISO 10012:2003) 19pp
Provides guidance and specifies generic requirements for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate compliance with metrological requirements. AS/NZSISO10012 is not intended to be used as a substitute for, or an addition to, ISO/IEC17025, nor as a requisite for demonstration conformance with ISO9001, ISO14001 or any other Standard. It is identical with, and has been reproduced from, ISO10012:2003. (QR-009)
AS 10303.211998 Implementation methods: Clear text encoding of the exchange structure (ISO 10303-21:1994, ISO 1030321:1994/Cor 1:1996) 83pp
Specifies a model for the definition of a mechanism that allows product data using the EXPRESS language to be transferred from one computer system to another. It is identical with and has been reproduced from ISO 10303-21:1994 including lSO 1030321:1994/Cor.1:1996. (IT-006)
94pp
Adopts ISO/IEC 10118-3:2004 to specify dedicated hash-functions, i.e. specifically designed hashfunctions. The hash-functions in this part of AS 10118 are based on the iterative use of round-function. Seven distinct round-functions are specified, giving rise to distinct dedicated hash-functions. (IT-012)
AS ISO/IEC 10118.3 Supplement 12006 Dedicated hash-functionsSupplement 1: Dedicated Hash-Function 8 (SHA-224) (Supplement to AS ISO/IEC 10118.32006) (ISO/IEC 10118-3:2004/Amd 1:2006) 10pp
Adopts ISO/IEC 10118-3:2004/Amd.1:2006 to include Dedicated Hash-Function 8 (SHA-224) specifications to complete the family of SHA hash-functions in AS ISO/IEC 10118.32006. (IT-012)
AS 10303.222000 Implementation methods: Standard data access interface (ISO 10303-22:1998) 216pp
Specifies the operation available to an application for the purposes of acquiring and manipulating data whose structure is defined by using Part 11 of this Standard. This Standard is identical with and reproduced from ISO 10303-22:1998. (IT-006)
AS ISO 100132003 Guidelines for quality management system documentation (ISO/TR 10013:2001) 14pp
Specifies guidelines for the development and maintenance of the documentation necessary to ensure an effective quality management system, tailored to the specific needs of the organization. This Standard is identical with and reproduced from ISO/TR 10013:2001. (QR-008)
AS 10303.311998 Conformance testing methodology and framework: General concepts (ISO 10303-31:1994) 39pp
Specifies general methodology and framework for testing the conformance of an implementation of AS 10303. It is identical with and has been reproduced from ISO 10303-31:1994. (IT-006)
AS ISO 100142007 Quality management systemsGuidelines for realizing financial and economic benefits (ISO 10014:2006, ISO 10014:2006/Cor 1:2007) 25pp
Provides guidelines for realizing financial and economic benefits through the effective application of eight quality management principles derived from ISO 9000:2005. It is intended to provide top management with information to facilitate effective application of principles and selection of tools that enable success and sustainability of an organization. Annex A includes a self-assessment for use as a gap analysis and prioritization tool. (QR-008)
AS 101791998 Information technologyProcessing languagesDocument style semantics and specification language (ISO/IEC 10179:1996) 292pp
Specifies the processing of valid SGML documents, transformation and style and defines the semantics, syntax, and processing model of languages for the specification of document processing transformation language for transforming SGML documents marked up in accordance with one or more DTDs into other SGML documents marked up with other DTDs. The specification of this transformation process is fully defined. This Standard is identical with and has been reproduced from ISO/IEC 10179:1996. (IT-001)
AS 10303.411998 Integrated generic resources: Fundamentals of product description and support (ISO 10303-41:1994) 182pp
Specifies resource constructs for the generic product description, generic management and support for the representation of products and their properties. Annexes A and C are contained in a diskette which accompanies this Standard. It is identical with and has been reproduced from ISO 10303-41:1994. (IT-006)
AS 10303.421998 Integrated generic resources: Geometric and topological representation (ISO 10303-42:1994) 228pp
Specifies the resource constructs for the explicit geometric and topological representation of the shape of
215
AS 10303.431998
the product. Annexes A and C are contained in a diskette which accompanies this Standard. It is identical with and has been reproduced from ISO 1030342:1994. (IT-006)
AS ISO 10303.2102004 Application protocol: Electronic assembly, interconnection, and packaging design (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) (ISO 10303-210:2001)
Adopts ISO 10303-210 which specifies a representation of product information along with the necessary mechanisms and definitions to enable product data to be exchanged between different computer systems and environments associated with the complete product lifecycle, including product design, manufacture, use, maintenance, and final disposition of the product. (IT-006)
AS 10303.441998 Integrated generic resources: Product structure configuration (ISO 10303-44:1994) 48pp
Specifies resources to manage the structure and configuration of product during its life cycle. Annexes A and C are contained in a diskette which accompanies this Standard. It is identical with and has been reproduced from ISO 10303-44:1994. (IT-006)
AS ISO 10303.2122004 Application protocol: Electrotechnical design and installation (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) (ISO 10303-212:2001)
Adopts ISO 10303-212 which specifies a representation of product information along with the necessary mechanisms and definitions to enable product data to be exchanged between different computer systems and environments associated with the complete product lifecycle, including product design, manufacture, use, maintenance, and final disposition of the product. (IT-006)
AS 10303.452000 Integrated generic resources: Materials (ISO 10303-45:1998, ISO 1030345:1998/Cor 1:1999) 42pp
Specifies the resource constructs for the material properties of a product and for the characterisation of a numerical data value as to its uncertainty and reliability. It is identical with and has been reproduced from ISO 10303-45:1998 and Technical Corrigendum 1:1999. (IT-006)
712pp
Specifies an application protocol for the exchange of drawings which consist of two-dimensional presentations of two-dimensional or three-dimensional geometry and planar annotation defined in a twodimensional or three-dimensional coordinate space. This Standard is identical with and has been reproduced from ISO 10303-202:1996. (IT-006)
AS ISO 10303.2142004 Application protocol: Core data for automotive mechanical design processes (ONLY AVAILABLE ON AS ISO 10303 2004 (CD-ROM)) (ISO 10303-214:2001)
Adopts ISO 10303-214 which specifies a representation of product information along with the necessary mechanisms and definitions to enable product data to be exchanged between different computer systems and environments associated with the complete product lifecycle, including product design, manufacture, use, maintenance, and final disposition of the product. (IT-006)
AS 10303.2031998 Application protocol: Configuration controlled design (ISO 10303-203:1994, ISO 10303203:1994/Cor 1:1996) 515pp
Specifies the integrated resources necessary for the scope and information requirements for the exchange between application systems of configuration controlled 3D designs of mechanical parts and assemblies. Annexes A and B are contained in a diskette which accompanies this Standard. It is identical with and has been reproduced from ISO 10303-203:1994 including lSO 10303-203:1994/Cor.1:1996. (IT-006)
AS 10303.471999 Integrated generic resource: Shape variation tolerances (ISO 10303-47:1997) 72pp
Specifies the resource constructs for representing dimensions and tolerances of product shapes. This Standard is identical with and has been reproduced from ISO 10303-47:1997. (IT-006)
AS ISO 10303.2162004 Application protocol: Ship moulded forms (ONLY AVAILABLE ON AS ISO 10303 2004 (CD-ROM)) (ISO 10303-216:2003)
Adopts ISO 10303-216 which specifies a representation of product information along with the necessary mechanisms and definitions to enable product data to be exchanged between different computer systems and environments associated with the complete product lifecycle, including product design, manufacture, use, maintenance, and final disposition of the product. (IT-006)
AS ISO 10303.2042004 Application protocol: Mechanical design using boundary representation (ONLY AVAILABLE ON AS ISO 103032004 (CDROM)) (ISO 10303-204:2002)
Adopts ISO 10303-204 which provides a representation of product information along with the necessary mechanisms and definitions to enable product data to be exchanged between different computer systems and environments associated with the complete product lifecycle, including product design, manufacture, use, maintenance, and final disposition of the product. (IT-006)
AS 10303.492000 Integrated generic resources: Process structure and properties (ISO 10303-49:1998) 50pp
Specifies the resource constructs to specify the actions or potential actions to effect a process. These actions include: relationships between processes, the effectivity of a process, the properties of a process, the resources and their properties required by the process, representation of the process and their resource and the relationship of the process to the product. This Standard is identical with and has been reproduced from ISO 10303-49:1998. (IT-006)
AS ISO 10303.2242004 Application protocol: Mechanical product definition for process planning using machining features (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) (ISO 10303-224:2001)
Adopts ISO 10303-224 which specifies a representation of product information along with the necessary mechanisms and definitions to enable product data to be exchanged between different computer systems and environments associated with the complete product lifecycle, including product design, manufacture, use, maintenance, and final disposition of the product. (IT-006)
AS 10303.2072000 Application protocol: Sheet metal die planning and design (ISO 10303-207:1999) 578pp
Specifies an application protocol for the exchange of sheet metal part design, part manufacture, and tool design information between contractors and suppliers. This Standard is identical with and has been reproduced from ISO 10303-207:1999. (IT-006)
41pp
Specifies the resource constructs for the representation of draughting information including information regarding the definition, description and administration of a drawing and the sheets of a drawing. Annexes A and C are contained in a diskette which accompanies this Standard. It is identical with and has been reproduced from ISO 10303-1:1994. (IT-006)
AS ISO 10303.2092004 Application protocol: Composite and metallic structural analysis and related design (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) (ISO 10303-209:2001)
Adopts ISO 10303-209 which specifies a representation of product information along with the necessary mechanisms and definitions to enable product data to be exchanged between different computer systems and environments associated with the complete product lifecycle, including product design, manufacture, use, maintenance, and final disposition of the product. (IT-006)
AS ISO 10303.2252004 Application protocol: Building elements using explicit shape representation (ONLY AVAILABLE ON AS ISO 10303 2004 (CD-ROM)) (ISO 10303-225:1999)
Adopts ISO 10303-225 which specifies a representation of product information along with the necessary mechanisms and definitions to enable product data to be exchanged between different computer systems and environments associated with the complete product lifecycle, including product design, manufacture, use, maintenance, and final disposition of the product. (IT-006)
AS ISO 10303.1042004 Integrated application resource: Finite element analysis (ISO 10303-104:2000) 532pp
Adopts ISO 10303-104 which provides a representation of product information along with the necessary mechanisms and definitions to enable product data to be exchanged between different computer systems and environments associated with the complete product lifecycle, including product design, manufacture, use, maintenance, and final disposition of the product. (IT-006)
216
AS ISO 10993.102003 Tests for irritation and delayed type hypersensitivity (ISO 10993-10:2002) 49pp
Specifies the procedure for the assessment of medical devices and their constituent materials with regard to their potential to produce irritation and delayed-type hypersensitvity, including pretest considerations, details of the test procedures, and key factors for the interpretation of the results. (HE-012)
AS/NZS ISO 10957:2004 Information and documentationInternational standard music number (ISMN) (ISO 10957:1993) 4pp
Adopts ISO 10957:1993 which specifies a means of uniquely identifying printed music publications. It standardizes and promotes internationally the use of numbers on printed music publications in order that one edition of a title or one separate component of an edition can be distinguished from all other editions or components by means of a unique international standard music number. (IT-019)
AS ISO 10303.2322004 Application protocol: Technical data packaging core information and exchange (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) (ISO 10303-232:2002)
Adopts ISO 10303-232 which specifies a representation of product information along with the necessary mechanisms and definitions to enable product data to be exchanged between different computer systems and environments associated with the complete product lifecycle, including product design, manufacture, use, maintenance, and final disposition of the product. (IT-006)
8pp
AS ISO 10993 Biological evaluation of medical devices AS ISO 10993.12002 Evaluation and testing (ISO 10993-1:1997)
Amendment 1 10 November 2005 Specifies methodologies for the evaluation of the systemic toxicity potential of medical devices which release constituents into the body. (HE-012)
11pp
Describes the principles governing biological evaluation and testing of medical devices. (HE-012)
AS ISO 10993.122004 Sample preparation and reference materials (ISO 10993-12:2002) 15pp
Specifies requirements and gives guidance on the procedures to be followed in the preparation of samples and the selection of reference materials for medical devices testing in biological systems in accordance with other AS ISO10993 series Standards. The Standard is identical to, and has been reproduced from, ISO10993-12:2002. (HE-012)
AS ISO 105352002 Hoists for the transfer of disabled persons Requirements and test methods (ISO 10535:1998) 36pp
Specifies requirements and test methods for hoists and body support units for the transfer of disabled persons. (ME-067)
AS ISO 10993.32002 Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:1992) 7pp
Specifies the requirements for tests of genotoxicity, carcinogenicity and reproductive toxicity for biological evaluation of medical devices. (HE-012)
AS ISO 10555 Sterile, single-use intravascular catheters AS ISO 10555.12002 General requirements (ISO 10555-1:1995)
AS ISO 10993.42003 Selection of tests for interactions with blood (ISO 10993-4:2002) 34pp 9pp
Specifies general requirements for evaluating the interactions of medical devices with blood. This Standard describes a classification of medical and dental devices that are intended for use in contact with blood, based on the intended use and duration of contact, the fundamental principles governing the evaluation of the interaction of devices with blood, and the rationale for structured selection of tests according to specific categories, together with the principles and scientific basis of these tests. (HE-012)
AS ISO 10993.132002 Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:1998) 10pp
Provides guidance on requirements for the design of tests to identify and quantify degradation products from finished polymeric medical devices ready for clinical use. (HE-012)
AS ISO 10651 Lung ventilators for medical use AS ISO 10651.12004 Requirements (ISO 10651-1:1993)
AS ISO 10993.142003 Identification and quantification of degradation products from ceramics (ISO 10993-14:2001) 11pp
Specifies two methods of obtaining solutions of degradation products from ceramics (including glasses) for the purposes of quantification, together with guidance on the analysis of these solutions in order to identify degradation products. This Standards considers only those degradation products generated by a chemical dissociation of ceramics during in-vitro testing. (HE-012)
25pp
Specifies requirements for lung ventilators intended for medical use. Identical with and reproduced from ISO 10651-1:1993. (HE-019)
8pp
AS ISO 10651.22004 Particular requirements for home care ventilators (ISO 10651-2:1996) 28pp
Specifies requirements for lung ventilators intended mainly for home care use but which could be used elsewhere (in hospitals) where the use of a ventilator complying with ISO 10651-1 is not required. Identical with and reproduced from ISO 10651-2:1996. (HE-019)
Specifies requirements for test methods to assess the in vitro cytotoxicity for biological evaluation of medical devices. (HE-012)
AS ISO 10993.62002 Tests for local effects after implantation (ISO 10993-6:1994) 11pp
Specifies test methods for the assessment of the local effects of an implant material on living tissue. (HE-012)
AS ISO 10993.152003 Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000) 12pp
Specifies guidance on general requirements for the design of tests for identifying and quantifying degradation products from finished metallic medical devices or corresponding material samples finished as ready for clinical use. This Standard is only applicable to those degradation products generated by chemical alteration of the finished metallic device in an in-vitro accelerated degradation test. (HE-012)
AS ISO 10651.32004 Particular requirements for emergency and transport ventilators (ISO 10651-3:1997) 28pp
Specifies requirements for portable lung ventilators designed for use in emergency situations and transport (e.g. by ambulance or rescue personnel). Also applicable to devices permanently mounted in ambulances or aircraft. Identical with and reproduced from ISO 10651-3:1997. (HE-019)
AS ISO 10993.162002 Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997) 10pp
Provides principles on how toxicokinetic studies relevant to medical devices should be designed and performed. (HE-012)
AS ISO 10651.42004 Particular requirements for operatorpowered resuscitators (ISO 10651-4:2002) 22pp
Specifies requirements for operator-powered resuscitators intended for use with all age groups and which are portable and intended to provide lung ventilation to individuals whose breathing is inadequate. Identical with and reproduced from ISO 10651-4:2002. (HE-019)
AS ISO 10993.82003 Selection and qualification of reference materials for biological tests (ISO 10993-8:2000) 4pp
Specifies requirements on the use of reference materials or certified reference materials used to determine the biological response of a material. This Standard also specifies the selection and qualification of reference materials for biological tests and the characteristics of reference materials for the use of reference materials as experimental controls. (HE-012)
AS ISO 10993.172004 Establishment of allowable limits for leachable substances (ISO 10993-17:2002) 25pp
Specifies a method for the determination of allowable limits for substances leachable from medical devices. It describes a systematic process through which identified risks arising from toxicologically hazardous substances present in medical devices can be quantified. Not applicable to devices that have no patient contact, e.g. invitro diagnostic devices. The Standard is identical to, and has been reproduced from, ISO1099317:2002. (HE-012)
AS 107451998 Information technologyOpen Systems InterconnectionUpper layers security model (ISO/IEC 10745:1995) 17pp
Specifies an architectural model that provides a basis for the development of application independent services and
AS ISO 10993.92002 Framework for identification and quantification of potential degradation products (ISO 10993-9:1999) 8pp
Provides general principles for the systematic evaluation of the potential and observed biodegradation of
217
AS ISO 111342003
AS ISO 111342003 Sterilization of health care products Requirements for validation and routine controlIndustrial moist heat sterilization (ISO 11134:1994) 22pp
Specifies requirements for the use of moist heat in sterilization process development, validation of the sterilization process and control of routine sterilization. It covers all moist heat processes, including saturated steam and airsteam mixtures, and applies to all industrial manufacturers and all others who perform contract moist heat sterilization. Although moist heat sterilization in non-industrial health care facilities is not specifically covered in this Standard, the principles outlined may be useful to the user of moist heat sterilization in these facilities. (HE-023)
AS ISO/IEC 11179.52005 Naming and identification principles for data elements (ISO/IEC 11179-5:1995) 14pp
Adopts ISO/IEC 11179-5:1995 which specifies rules and guidelines for naming and identification of data elements. It describes the components and structure of data element identification. (IT-027)
AS/NZS ISO/IEC 11770.2:2008 Mechanisms using symmetric techniques (ISO/IEC 11770-2:1996, ISO/IEC 117702:1996/Cor 1:2005) 18pp
Adopts ISO/IEC 11770-2:1996 which defines key establishment mechanisms using symmetric cryptographic techniques. (IT-012)
62pp
AS/NZS ISO/IEC 11770.3:2008 Mechanisms using asymmetric techniques (ISO/IEC 11770-3:1999) 35pp
Adopts ISO/IEC 11770-3:1999 which defines key management mechanisms based on asymmetric cryptographic techniques. (IT-012)
AS ISO 111352002 Medical devicesValidation and routine control of ethylene oxide sterilization (ISO 11135:1994) 24pp
Specifies the requirements and guidance for validation and routine control of ethylene oxide sterilization processes for medical devices. (HE-023)
Adopts ISO/IEC 11179-6:2005 which specifies the procedure by which administered items required in various application areas could be registered and assigned an internationally unique identifier. (IT-027)
AS ISO 114532004 Statistical interpretation of dataTests and confidence intervals relating to proportions (ISO 11453:1996) 57pp
Adopts ISO 11453:1996 which describes statistical methods for determining proportions of a population(s) in specific instances. (QR-008)
AS/NZS ISO/IEC 11770.4:2008 Mechanisms based on weak secrets (ISO/IEC 11770-4:2006) 33pp
(IT-012)
AS/NZS ISO 11137 Sterilization of health care products Radiation AS/NZS ISO 11137.1:2006 Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006) 37pp
Adopts ISO 11137-1:2006 to specify requirements for the development, validation and routine control of a radiation sterilization process employing irradiations. (HE-023)
AS ISO 11462 Guidelines for implementation of statistical process control (SPC) AS ISO 11462.12004 Elements of SPC (ISO 11462-1:2001)
AS/NZS ISO 11798:2004 Information and documentationPermanence and durability of writing, printing and copying on paperRequirements and test methods (ISO 11798:1999) 12pp
Adopts ISO 11798:1999 which specifies requirements and test methods for evaluation of the permanence and durability of writing, printing and copying on paper stored in libraries, archives and other protected environments for long periods of time. (IT-019)
23pp
Adopts ISO 11462-1:2001 which provides for analysts the elements for implementing an SPC system to increase knowledge about a process, steer a process to behave in a certain way, reduce variation of finalproduct parameters or in other ways improve performance of a process in order to guide an organization in planning, developing, executing or evaluating an SPC system. (QR-008)
AS ISO 11843 Capability of detection AS ISO 11843.12004 Terms and definitions (ISO 11843-1:1997, ISO 11843-1:1997/Cor 1:2003) 12pp
Adopts ISO 11843-1:1997 and Corrigendum 1:2003, which specifies terms and definitions relating to the detection of a difference between an actual state of a system and its basic state. (QR-008)
60pp
Adopts ISO 11137:2006 to specify methods of determining the minimum dose needed to achieve sterility. Dose auditing is also covered. (HE-023)
AS/NZS ISO 11553:2004 Safety of machineryLaser processing machinesSafety requirements (ISO 11553:1996) 12pp
Describes hazards generated by laser processing machines, and specifies the safety requirement related to radiation hazards and hazards generated by materials and substances. It also specifies the information to be supplied by manufacturers of such equipment. Identical with and reproduced from ISO 11553:1996. (SF-019)
AS ISO 11979 Opthalmic implantsIntraocular lenses AS ISO 11979.12003 Vocabulary (ISO 11979-1:1999)
15pp
Adopts ISO 11137-3:2006 to provide guidance on AS/NZS ISO 11137 parts 1 and 2 on dosimetry. (HE-023)
10pp
AS ISO/IEC 11179 Information technologyMetadata registries (MDR) AS ISO/IEC 11179.12005 Framework (ISO/IEC 11179-1:2004)
23pp
AS/NZS 11572:1999 Information technologyTelecommunications and information exchange between systems Private integrated services networkCircuit mode bearer servicesInter-exchange signalling procedures and protocol (ISO/IEC 11572:1997) 120pp
Specifies enhanced signalling procedures and protocol for the support of circuit-switched call control at the Q reference point between private integrated services network exchanges connected together within a private integrated services network. The Q reference is defined in AS/NZS 4136.1:1995. This Standard is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 11572:1997 and its Amendments 1 and 2. (IT-016)
Specifies terms applicable to intraocular lenses and the methods used to evaluate them. (HE-012)
AS ISO 11979.22003 Optical properties and test methods (ISO 11979-2:1999) 20pp
Specifies requirements and test methods for certain optical properties of non-toric, monofocal intraocular lenses intended for implantation into the anterior segment of the human eye, excluding corneal implants. (HE-012)
Adopts ISO/IEC 11179-1:2004 which specifies basic aspects of data element composition, including metadata. It applies to formulation of data element representations and meaning as shared among people and machines; it does not apply to the physical representation of data as bits and bytes at the machine level. (IT-027)
AS ISO 11979.32003 Mechanical properties and test methods (ISO 11979-3:1999) 37pp
Specifies requirements and test methods for certain mechanical properties of intraocular lenses intended for implantation in the anterior segment of the human eye, excluding corneal implants, provided that the test method is appropriate to the particular intraocular lens design. (HE-012)
8pp
Adopts ISO/IEC 11179-2:2000 which provides procedures and techniques for associating data with classification schemes. (IT-027)
AS ISO/IEC 11179.32005 Registry metamodel and basic attributes (ISO/IEC 11179-3:2003) 99pp
Adopts ISO/IEC 11179-3:2003 which specifies basic attributes which are required to describe metadata items, and which may be sued in situations where a complete metadata registry is not appropriate. (IT-027)
AS ISO 116542002 AcousticsRating of sound absorption Materials and systems (ISO 11654:1997)
7pp
Specifies a single number rating that can be used to formulate requirements and to describe acoustical properties of sound-absorption products used for routine applications in buildings. This Standard is identical with, and has been reproduced from, ISO 11654:1997. (AV-004)
6pp
Specifies the labelling requirements for intraocular lenses and the information to be provided within or on the packaging. (HE-012)
AS 11770 Information technologySecurity techniques Key management AS 11770.12003 Framework (ISO/IEC 11770-1:1996)
14pp
9pp
Adopts ISO/IEC 11179-4:2004 which specifies requirements and recommendations for constructing definitions for data and metadata. (IT-027)
21pp
Specifies particular requirements for the biological evaluation of intraocular lenses which are in addition to the requirements outlined in the relevant parts of ISO 10993. It also gives guidance on conducting an ocular implantation test. (HE-012)
Identifies the objective of key management and defines the basic concepts, services, and characteristics of the mechanisms while describing specific requirements and a framework for the management of keying material during its life cycle. (IT-012)
12pp
Specifies tests by which the shelf-life of sterile intraocular lenses in their final packaging can be deter-
218
23pp
Specifies particular requirements for clinical investigation protocols for posterior and anterior chamber monofocal intraocular lenses for the correction of aphakia. (HE-012)
AS EN 12442.32003 Validation of the elimination and/or inactivation of viruses and transmissible agents (EN 12442.3:2003) 23pp
Specifies requirements for the validation of elimination and/or inactivation of viruses and/or transmissible agents during the manufacture of medical devices (excluding in-vitro diagnostic medical devices) utilizing materials of animal origin. It is not applicable to bacteria, moulds and yeasts. (HE-012)
4pp
Specifies fundamental requirements for all types of intraocular lenses intended for surgical implantation into the anterior segment of the human eye, excluding corneal implants and transplants. (HE-012)
AS EN 12470 Clinical thermometers AS EN 12470.22004 Phase change type (dot matrix) thermometers (EN 12470-2:2000) 12pp
Specifies performance requirements and test methods for phase change-type (dot matrix) thermometers for measuring temperature in body cavities. Identical with and reproduced from EN 12470-2:2000. (CH-030)
AS/NZS ISO 11990:2002 Optics and optical instrumentsLasers and laser-related equipmentDetermination of laser resistance of tracheal tube shafts (ISO 11990:1999) 9pp
Specifies a method of testing the laser resistance of the shaft of a tracheal tube. (HE-003)
AS/NZS 13241:1999 Information technologyTelecommunications and information exchange between systems Private integrated services networkInterexchange signalling protocolRoute restriction class additional network feature (ISO/IEC 13241:1997) 15pp
Specifies the signalling protocol for the support of the route restriction class additional network feature at the Q reference point between private integrated services network exchanges connected together within a private integrated services network. The Q reference point is defined in AS/NZS 4136.1:1995. This Standard is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 13241:1997. (IT-016)
AS/NZS ISO 12029:2007 Electronic imagingForms design optimization for electronic image management (ISO/TS 12029:2007) 16pp
Provides guidelines for the design of forms to be completed by users and scanned for processing by electronic image management (EIM) systems. (IT-021)
AS EN 12470.32004 Performance of compact electrical thermometers (non-predictive and predictive) with maximum device (EN 12470-3:2000) 17pp
Specifies performance requirements for compact clinical electrical thermometers with maximum device (non-predictive and predictive). Identical with and reproduced from ENL 12470-3:2000. (CH-030)
AS ISO 121242003 AcousticsProcedures for the measurement of real-ear acoustical characteristics of hearing aids (ISO 12124:2001) 17pp
Specifies procedures and requirements for measuring the real-ear acoustical characteristics of hearing aids. Its purpose is to ensure that the same measurements made on a given hearing aid on a given human ear give substantially the same results. This Standard id identical with and reproduced from ISO 12424:2001. (AV-003)
AS/NZS 13242:1999 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsRoute restriction class additional network feature (ISO/IEC 13242:1997) 14pp
Specifies the route restriction class additional network feature applicable to various basic services supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. This Standard is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 13242:1997. (IT-016)
AS EN 12470.42004 Performance of electrical thermometers for continuous measurement (EN 12470-4:2000) 17pp
Specifies metrological and technical requirements for electrical thermometers for continuous measurements. Identical with and reproduced from EN 12470-4:2000. (CH-030)
AS EN 121822002 Technical aids for disabled personsGeneral requirements and test methods (EN 12182:1999) 31pp
Specifies general requirements and test methods for technical aids for disabled persons. (ME-067)
56pp
Provides information on collection of data on icing and on loads for categories of ice accumulation. (BD-006)
AS/NZS 13246:1999 Information technologyTelecommunications and information exchange between systems Broadband private integrated services networkInter-exchange signalling protocol Signalling ATM adaptation layer (ISO/IEC 13246:1997) 19pp
Specifies the signalling asynchronous transfer mode adaptation layer protocol used in interface between broadband private integrated services network exchanges and between broadband private integrated services networks. This Standard is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 13246:1997. (IT-016)
AS/NZS ISO/IEC 12207:1997 Information technologySoftware life cycle processes (ISO/IEC 12207:1995) 57pp
Amendment 1 10 May 2004 Amendment 2 19 October 2005 Specifies a common framework for software life cycle processes that can be referenced by the software industry. It includes processes, activities and tasks to be applied during the acquisition of a system that contains software, a standalone software product and software services. It is intended to be employed during the supply, development, operation and maintenance of software products, including the software portion of firmware. This Standard is identical with and has been reproduced from ISO/IEC 12207:1995. (IT-015)
AS ISO 12647 Graphic technologyProcess control for the production of half-tone colour separations, proof and production prints AS ISO 12647.22008 Offset lithographic processes (ISO 12647-2:2004, ISO 12647-2:2004/Amd 1:2007) 19pp
Adopts ISO 12647-2:2004 to specify a number of process parameters and their values to be applied when preparing colour separations for four-colour offset printing or when producing four-colour prints by one of the following methods: heat-set web, sheet-fed or continuous forms process printing, or proofing for one of these processes; or offset proofing for half-tone gravure. (EX-004)
AS/NZS 13247:1999 Information technologyTelecommunications and information exchange between systems Broadband private integrated services networkInter-exchange signalling protocol Basic call/connection control (ISO/IEC 13247:1997) 143pp
Specifies the signalling protocol for basic call/connection control at the Q reference point between private integrated services network exchanges connected together within a broadband private integrated services network using asynchronous transfer mode. This Standard is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 13247:1997. (IT-016)
AS EN 12442 Animal tissues and their derivatives utilized in the manufacture of medical devices AS EN 12442.12003 Analysis and management of risk (EN 12442.1:2000)
AS/NZS ISO/IEC 13235 Information technologyOpen Distributed ProcessingTrading function AS/NZS ISO/IEC 13235.1:2006 Specification (ISO/IEC 13235-1:1998)
17pp
Specifies a procedure to investigate, using available information, the safety of medical devices by identifying hazards and estimating the risks associated with the device (risk analysis). This Standrad applies to medical devices (excluding in-vitro diagnostic medical devices) manufactured utilizing animal tissue or products derived from animal tissue, which are nonviable or have been rendererd non-viable. (HE-012)
80pp
Adopts ISO/IEC 13235-1:2006 to provide a performance model of Open Distributed Processing RM-ODP framework. Definition of an architecture within which support of distribution, interoperability and portability can be integrated. The trading function provides means to offer a service and the means to discover services that have been offered. (IT-015)
AS ISO/IEC 13249 Information technologyDatabase languages SQL multimedia and application packages AS ISO/IEC 13249.12005 Framework (ISO/IEC 13249-1:2002)
16pp
AS/NZS ISO/IEC 13235.3:2006 Provision of Trading Function using OSI Director Service (ISO/IEC 13235-3:1998) 49pp
Adopts ISO/IEC 13235-3:1998 to describe how the Open Distributed Process (DOP) Trading function can be realised using information entries and support
Adopts ISO/IEC 13249-1:2002 which specifies a number of packages of generic data types common to various kinds of data used in multimedia and application areas, to enable that data to be stored and manipulated in an SQL database. (IT-027)
219
AS ISO/IEC 13249.22005
AS ISO/IEC 13249.22005 Full-Text (ISO/IEC 13249-2:2003) AS ISO 134852003 Medical devicesQuality management systemsRequirements for regulatory purposes (ISO 13485:2003) 57pp
Specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer requirements and regulatory requirements applicable to medical devices and related services. The primary objective is to facilitate harmonized medical device regulatory requirements for quality management systems. As a result, it includes some particular requirements for medical devices and excludes some of the requirements of ISO 9001 that are not appropriate as regulatory requirements. Because of these exclusions, organizations whose quality management systems conform to this International Standard cannot claim conformity to ISO 9001 unless their quality management systems conform to all the requirements of ISO 9001. It is identical with and reproduced from ISO 13485:2003. (HE-028)
223pp
Adopts ISO/IEC 13249-2:2003 which defines multimedia and application specific types and their associated routines. (IT-027)
AS ISO 13584.312004 Implementation resources: Geometric programming interface (ISO 13584-31:1999) 346pp
Adopts ISO 13584-31 which provides an application programming interface that enables an application program to generate geometric models that are independent of the target user system. The interface allows portability of programs that describe parametric shape representations of parts families held in an AS ISO 13584 parts library. (IT-006)
453pp
Adopts ISO/IEC 13249-3:2003 which defines multimedia and application specific types and their associated routines using the user-defined features in ISO/IEC9075. (IT-027)
AS ISO 13584.422004 Description methodology: Methodology for structuring part families (ISO 13584-42:1998) 132pp
Adopts ISO 13584-42 which provides the principles that shall be used for defining families of parts and properties of parts to fully characterize parts and associated properties. (IT-006)
104pp
Adopts ISO/IEC 13249-5:2003 which defines multimedia and application specific types and their associated routines using the user-defined features in ISO/IEC 9075. (IT-027)
AS 13567 Technical product documentation Organization and naming of layers for CAD AS 13567.11999 Overview and principles (ISO 13567-1:1998)
196pp
AS ISO 13584.1012004 Geometrical view exchange protocol by parametric program (ISO 13584-101:2003) 40pp
Adopts ISO 13584-101 which provides a representation category called basic_geometry. This representation category captures the generic concepts of the shape of a part. This representation category may be associated with any of the items defined in a parts library. (IT-006)
Adopts ISO/IEC 13249-6:2002 which defines multimedia and application specific types and their associated routines using the user-defined features in ISO/IEC 9075. (IT-027)
7pp
Specifies the general priciple of layer structuring within CAD files. These layers are used to control visibility and to manage and communicate CAD file data. This Standard is identical with and has been reproduced from ISO 13567-1:1998. (IT-006)
AS 13567.21999 Concepts, format and codes used in construction documentation (ISO 13567-2:1998) 10pp
Specifies the organization and allocation of layers for CAD on construction projects for the purpose of communication and management. This Standard is identical with and has been reproduced from ISO 13567-2:1998. (IT-006)
AS 13335 Information technologyGuidelines for the management of IT Security AS 13335.12003 Concepts and models for IT Security (ISO/IEC TR 13335-1:1996) 118pp
Presents the basic management concepts and models which are essential for an introduction into the management of IT Security. (IT-012)
AS ISO 13584 Industrial automation systems and integrationParts library AS ISO 13584.12004 Overview and fundamental principles (ISO 13584-1:2001) 18pp
Adopts ISO 13584-1 which provides a representation of parts library information together with the necessary mechanisms and definitions to enable parts library data to be exchanged, used and updated. The exchange may be between different computer systems and environments associated with the complete lifecycle of the products where the library parts may be used, including product design, manufacture, use, maintenance, and disposal. (IT-006)
AS/NZS ISO 13694:2004 Optics and optical instrumentsLasers and laser-related equipment -Test methods for laser beam power (energy) density distribution (ISO 13694:2000) 16pp
Specifies methods by which the measurement of power (energy) density distribution is made and defines parameters for the characterization of the spatial properties of laser power (energy) density distribution function at a given plane. Identical with and reproduced from ISO 13694:2000. (SF-019)
14pp
Addresses subjects essential to the management of IT Security, and the relationship between those subjects. (IT-012)
AS/NZS 13818 Information technologyGeneric coding of moving pictures and associated audio information AS/NZS 13818.1:2002 Systems (ISO/IEC 13818-1:2000, ISO/IEC 138181:2000/Cor 1:2002) 156pp
Specifies the systems layer of the coding. It was developed principally to support the combination of the video and audio coding methods defined in Parts 2 and 3 of ISO/IEC 13818. This Standard is identical with and has been reproduced from ISO/IEC 138181:2000 and ISO/IEC 13818-1:2000/Corr.1:2002. (IT-029)
AS ISO 13584.202004 Logical resource: Logical model of expressions (ISO 13584-20:1998) 87pp
Adopts ISO 13584-20 which provides an EXPRESS schema for expressions, that models the subset of the allowed expressions in the EXPRESS language defined in ISO 10303-11 that corresponds to integer, real, Boolean and string data types. This schema uses the resources defined in the generic expression schema. (IT-006)
61pp
Provides guidance on the selection of safeguards, taking into account business needs and security concerns. (IT-012)
AS ISO 13584.242004 Logical resource: Logical model of supplier library (ISO 13584-24:2003) 653pp
Adopts ISO 13584-24 which provides generic EXPRESS resource constructs that support the description of different kinds of information about supplier libraries. It also contains a set of integrated EXPRESS information models for representing supplier libraries for the purpose of exchange. (IT-006)
AS/NZS 13818.2:2002 Video (ISO/IEC 13818-2:2000, ISO/IEC 138182:2000/Amd 1:2001, ISO/IEC 138182:2000/Cor 1:2002) 230pp
Specifies the coded representation of picture information for digital storage media and digital video communication and specifies the decoding process. This Standard is identical with and has been reproduced from ISO/IEC 13818-2:2000, ISO/IEC 138182:2000/Amdt.1:2001 and ISO/IEC 138182:2000/Corr.1:2002. (IT-029)
AS ISO 134252004 Guidelines for the selection of statistical methods in standardization and specification (ISO/TR 13425:2003) 28pp
Adopts ISO/TR 13425:2003 which provides guidance on the selection and an overview of all the reference standards, guides, technical reports and DIS developed by ISO/TC 69 from a user perspective. (QR-008)
AS ISO 13584.262004 Logical resource: Information supplier identification (ISO 13584-26:2000) 19pp
Adopts ISO 13584-26 which provides a supplier code to identify the information suppliers of the contents of a library, and when the content of this library was provided in a standard document, a code that identifies this standard document. (IT-006)
115pp
Specifies the coded respresentation of multichannel and multilingual high quality audio for broadcasting, transmission and storage media and the method for decoding of multichannel and multilingual high quality audio signals. This Standard is identical with and has been reproduced from ISO/IEC 13818-3:1998. (IT-029)
220
AS/NZS ISO 13994:2006 Clothing for protection against chemicals Determination of the resistance of protective clothing materials to penetration by liquids under pressure (ISO 13994:2005) 16pp
Adopts ISO 13994:2005 to specify a laboratory test method for the measurement of penetration resistance of protective clothing to liquids under pressure. (SF-004)
forming, interpreting and reporting a Life Cycle Inventory analysis (LCI). This Standard is identical with and has been reproduced from ISO 14041:1998. (EV-005)
AS/NZS ISO 14042:2001 Environmental managementLife cycle assessmentLife cycle impact assessment (ISO 14042:2000) 16pp
Describes and gives on a general framework for the life cycle impact assessment (LCIA) phase of life cycle assessment (LCA),and the key features and inherent limitations of LCIA. Specifies requirements for conducting the LCIA phase and relationship of LCIA to other LCA phases. This Standard is identical with and has been reproduced from ISO 14042:2000. (EV-005)
AS/NZS ISO 14000 Set:2005 Environmental Management Standards Set AS/NZS ISO 14000 Basic Set:2007 Environmental Management Basic Set AS/NZS ISO 14001:2004 Environmental management systems Requirements with guidance for use (ISO 14001:2004) 88pp
313pp
Amendment 1 17 December 2002 Provides C language software simulation of an encoder and decoder for Part 1, Part 2 and Part 3 of AS/NZS 13818:1997. This Standard is identical with and has been reproduced from ISO/IEC TR 138185:1997. (IT-029)
23pp
AS/NZS ISO 14043:2001 Environmental managementLife cycle assessmentLife cycle interpretation (ISO 14043:2000) 18pp
Provides requirements and recommendations for conducting the life cycle interpretations in life cycle assessment (LCA) or life cycle inventory analysis (LCI) studies. This Standard is identical with and has been reproduced from ISO 14043:2000. (EV-005)
542pp
Amendment 1 2 December 2002 Specifies the digital storage media command and control (DSM-CC) of a digital bit stream complying with the protocol specified by other Parts in this series of Standards, i.e. extending the capabilities of the original protocol. The specification consists of concepts and protocols which provide the general capability to browse, select, download and control a variety of bit streams. This Standard is identical with and has been reproduced from ISO/IEC 13818-6:1998. (IT-029)
Adopts ISO14001:2004 which specifies requirements for an environmental management system (EMS) to enable an organization to develop and implement a policy and objectives which take into account legal requirements and other requirements to which the organization subscribes, and information about significant environmental aspects. It applies to those environmental aspects that the organization identifies as those which it can control and those which it can influence. It does not itself state specific environmental performance criteria. (QR-011)
AS ISO 140482003 Environmental managementLife cycle assessmentData documentation format (ISO/TS 14048:2002) 41pp
Provides the requirements and a structure for a data documentation format to be used for transparent and unambiguous documentation exchange of Life Cycle Assessment and Life Cycle Inventory data, thus permitting consistent documentation of data, reporting of data collection, data calculation and data quality, by specifying and structuring relevant information. This Standard is identical with and reproduced from ISO/TR 14048:2002. (EV-005)
AS/NZS ISO 14004:2004 Environmental management systems General guidelines on principles, systems and support techniques (ISO 14004:2004) 39pp
Adopts ISO14004:2004 which provides guidance on the establishment, implementation, maintenance and improvement of an environmental management system (EMS) and its coordination with other management systems. (QR-011)
194pp
Adopts ISO/IEC 13818-7:2006, which specifies the MPEG-2 audio non-backwards compatible standard called MPEG-2 Advanced Audio Coding, AAC [1], a higher quality multichannel standard than achievable while requiring MPEG-1 backwards compatibility. (IT-029)
AS/NZS ISO 14015:2003 Environmental managementEnvironmental assessment of sites and organizations (EASO) (ISO 14015:2001) 19pp
Provides guidance on how to conduct an EASO through a systematic process of identifying environmental aspects and environmental issues, and determining any business consequences. This Standard is identical with and reproduced from ISO 14015:2001. (QR-011)
AS ISO 14064 Set2008 Greenhouse gases Set AS ISO 14064 Greenhouse gases
83pp
AS/NZS 13818.9:1999 Extension for real time interface for systems decoders (ISO/IEC 13818-9:1996) 5pp
Specifies a real time interface for systems decoders based on the requirements of AS/NZS 13818.1. This Standard is identical with and has been reproduced from ISO/IEC 13818.9:1996. (IT-029)
AS/NZS 13818.10:2002 Conformance extensions for Digital Storage Media Command and Control (DSMCC) (ISO/IEC 13818-10:1999) 140pp
Defines compliance to Data Storage Media Command and Control (DSMCC) Standard in 2 steps: the static review and the dynamic review as defined in ISO/IEC 9646 Conformance Testing Standard (1, 2, 3). This Standard is identical with and has been reproduced from ISO/IEC 13818-10:1999. (IT-029)
AS/NZS ISO 14021:2000 Environmental labels and declarationsSelfdeclared environmental claims (Type II environmental labelling) (ISO 14021:1999) 23pp
Specifies requirements applying to the development of environmental claims, expressed in either words or symbols, about products and services. Includes both general requirements and specific details for selected claims, along with verification methodologies. This Standard is an adoption with national modifications of ISO 14021:1999. (EV-003)
AS ISO 14064.12006 Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2006) 20pp
Adopts ISO 14064-1:2006 to provide organizations with a common, internationally agreed approach to measuring and reporting greenhouse gas emissions and removals. (EV-015)
AS/NZS ISO 14031:2000 Environmental managementEnvironmental performance evaluationGuidelines (ISO 14031:1999) 32pp
Provides guidance on the use of environmental performance evaluation (EPE) as an internal management process designed to produce reliable and verifiable information on an ongoing basis to determine whether an organization's environmental performance is meeting criteria set by management. (QR-011)
AS ISO 14064.22006 Specification with guidance at the project level for quantification and reporting of greenhouse gas emission reductions and removal enhancements (ISO 140622:2006, MOD) 29pp
Adopts ISO 14064-2:2006 with national modifications to specify principles and requirements and provides guidance at the project level for quantification, monitoring and reporting of activities intended to cause greenhouse gas (GHG) emission reductions or removal enhancements. (EV-015)
74pp
Adopts ISO/IEC 13818-11:2004 which specifies IPMP (Intellectual Property Management and Protection) on the MPEG-2 system. (IT-029)
AS ISO 138222005 Basis for design of structuresAssessment of existing structures (ISO13822:2001, MOD) 36pp
Provides a basis for assessment of the structural condition of existing structures. (BD-006)
AS/NZS ISO 14040:1998 Environmental managementLife cycle assessmentPrinciples and framework (ISO 14040:1997) 12pp
Specifies the general framework, principles and requirements for conducting and reporting life cycle assessment studies. It is identical with and has been reproduced from ISO 14040:1997. (EV-005)
AS ISO 14064.32006 Specification with guidance for the validation and verification of greenhouse gas assertions (ISO 14064-3:2006) 34pp
Adopts ISO 14064-3:2006 to specify principles and requirements and provides guidance for those conducting or managing the validation and/or verification of greenhouse gas (GHG) assertions. (EV-015)
AS ISO 139162003 WeldingGuide on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996) 3pp
Technically identical to and reproduced from ISO 13916:1996 which sets out requirements for the measurement of preheating temperature, interpass temperature and preheat maintenance temperature for fusion welding. (WD-003)
AS/NZS ISO 14041:1999 Environmental managementLife cycle assesmentGoal and scope definition and inventory analysis (ISO 14041:1998) 21pp
Specifies the requirements and the procedures necessary for the compilation and preparation of the definition of goal and scope for a Life Cycle Assessment (LCA), and for per-
AS/NZS 14102:1998 Information technologyGuideline for evaluation and selection of CASE tools (ISO/IEC 14102:1995) 55pp
Specifies the processes and activities to be applied to the evaluation of CASE tools and selecting the most appropri-
221
AS/NZS 14143.1:1999
ate CASE tools from several candidates. This Standard is identical with, and has been reproduced from, ISO/IEC 14102:1995. (IT-015)
AS/NZS 14143 Information technologySoftware measurementFunctional size measurement AS/NZS 14143.1:1999 Definition of concepts (ISO/IEC 14143-1:1998)
AS ISO 141602002 Sterilization of single-use medical devices incorporating materials of animal origin Validation and routine control of sterilization by liquid sterilants (ISO 14160:1998) 21pp
Specifies requirements for the development, validation, process control and monitoring of the sterilization, by the use of liquid chemical sterilants, of single-use medical devices comprising, in whole or in part, materials of animal origin. (HE-023)
plicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC TR 14475:1996. (IT-016)
AS/NZS 14478 Information technologyComputer graphics and image processingPresentation environment for multimedia objects AS/NZS 14478.1:2000 Fundamentals of presentation environment for multimedia objects (ISO/IEC 14478-1:1998) 36pp
Describes the overall architecture and specifies the common semantics for the construction of, presentation of, and interaction with multimedia objects such as still and moving computer graphics, synthetic graphics, audio, and still and moving images. This Standard is identical with and has been reproduced from ISO/IEC 14478-1:1998. (IT-029)
6pp
Defines the fundamental concepts of functional size measurement (FSM), thereby promoting the consistent interpretation of FSM principles which are already in existence. This Standard is identical with and has been reproduced from ISO/IEC 14143-1:1998. (IT-015)
AS/NZS 14143.2:2003 Conformity evaluation of software size measurement methods to AS/NZS 14143.1:1999 (ISO/IEC 14143-2:2002) 32pp
Establishes a framework for the conformity evaluation of a Candidate Functional Size Measurement Method against the provisions of AS/NZS 14143.1:1999; and describes a process for conformity evaluation of whether a Candiate Functional Size Measurement Method meets the (type) requirements of AS/NZS 14143.1:1999 such that it is an actual Functional Size Measurement Method. Additionally, it describes the requirements for performing a conformity evaluation in order to ensure repeatability of the conformity evaluation process, as well as consistency of decisions on conformity and the final result; and aims to sure that the output from the conformity evaluation process is objective, impartial, consistent, repeatable, complete and auditable. (IT-015)
AS ISO 142372006 Surface chemical analysisSecondary-ion mass spectrometryDetermination of boron atomic concentration in silicon using uniformly doped materials (ISO 14237:2000) 22pp
Adopts ISO 14237:2000 to specify a secondary-ion mass spectrometric method for the determination of boron atomic concentration in single-crystalline silicon, using uniformly doped materials calibrated by a certified reference material implanted with boron. (CH-016)
71pp
AS/NZS ISO 14343:2006 Welding consumablesWire electrodes, wires and rods for arc welding of stainless and heat-resisting steelsClassification (ISO 14343:2002) 11pp
Specifies requirements for classification of wire electrodes, wires and rods for gas-shielded metal arc welding, gas tungsten arc welding, plasma arc welding, submerged arc welding and laser beam welding of stainless and heatresisting steels. Identical to, and reproduced from, ISO14343:2002. (WD-002)
Specifies an initial set of lists of object and non-object types (conforming with AS/NZS 14478.1) useful for the construction of, presentation of, and interaction with multimedia information. This Standard is identical with and has been reproduced from ISO/IEC 14478-2:1998. (IT-029)
74pp
AS/NZS ISO/IEC 14143.3:2004 Verification of functional size measurement methods (ISO/IEC TR 14143-3:2003) 23pp
Adopts ISO/IEC TR 14143-3:2003 which specifies a framework for verifying the statements of an FSM Method and/or for conducting tests requested by the verification sponsor. (IT-015)
AS/NZS ISO 14344:2005 Welding and allied processesFlux and gas shielded electrical welding processes Procurement guidelines for consumables (ISO 14344:2002) 8pp
Proposes a method for preparing specific details needed for the procurement of welding consumables (WD-002)
Specifies a set of system software components which marshal lower-level system resources to the task of supporting multimedia processing, so providing a set of common services which can be used by multimedia application developers. This Standard is identical with and has been reproduced from ISO/IEC 144783:1998. (IT-029)
AS 14443 Identification cardsContactless integrated circuit(s) cardsProximity cards AS 14443.12003 Physical characteristics (ISO/IEC 14443-1:2000)
AS/NZS 14478.4:2000 Modelling, rendering and interaction component (ISO/IEC 14478-4:1998) 71pp
Specifies the objects needed for advanced computer systems using graphics, video, audio, or other types of presentable media enhanced by time aspects. This Standard is identical with and has been reproduced from ISO/IEC 14478-4:1998 (IT-029)
95pp
Specifies a quantitative method for measuring process efficiency and effectiveness, and for managing software costs, for the systems organizations to acquire, develop, enhance or maintain. Defines a reference model for verifying a Functional Size Measurement method. (IT-015)
5pp
AS/NZS ISO/IEC 14143.5:2004 Determination of functional domains for use with functional size measurement (ISO/IEC TR 14143-5:2004) 27pp
Adopts ISO/IEC TR 14143-5:2004 which describes the characteristics of Functional Domains and the procedures by which characteristics of Functional User Requirements (FUR) can be used to determine Functional Domains. (IT-015)
AS 14443.22003 Radio frequency power and signal interface (ISO/IEC 14443-2:2001) 11pp
Describes the electrical characteristics of two types of contactless interface between a proximity card and a proximity coupling device. In addition, includes both power and bi-directional communication. (IT-012)
AS/NZS ISO/IEC 14143.6:2006 Guide for use of ISO/IEC 14143 series and related International Standards (ISO/IEC 14143-6:2006) 21pp
Adopts ISO/IEC 14143-6:2006 to provide Functional Size Method users with a guide as to how the AS/NZS 14143 series of Standards and other functional size measurement standards and Technical Report relate to each other and how to use them. (IT-015)
48pp
Describes polling for proximity cards entering the field of a proximity coupling device, the byte format and framing, the initial Request and Answer to Request command content, methods to detect and communicate with one proximity card among several proximity cards (anticollision) and other parameters required to initialize communications between a proximity card and a proximity coupling device. (IT-012)
AS ISO 14155 Clinical investigations of medical devices for human subjects AS ISO 14155.12004 General requirements (ISO 14155-1:2003)
34pp
21pp
Provides a half-duplex block transmission protocol featuring the special needs of a contactless environment and defines the activation and deactivation sequence of the protocol. (IT-012)
Specifies procedures for the conduct and performance of clinical investigations of medical devices. Not applicable to in vitro diagnostic medical devices. Identical with and reproduced from ISO14155-1:2003. (HE-012)
AS/NZS 14475:1999 Information technologyTelecommunications and information exchange between systems Private integrated services network Architecture and scenarios for private integrated services networking (ISO/IEC TR 14475:1996) 19pp
Specifies inter-private exchange connections provided by intervening networks. It is one of a series of Standards ap-
222
21pp
Proposes the adoption of ISO/IEC 14496-17:2006 which specifies the coded representation of textual information for timed presentation on screens. (IT-029)
35pp
18pp
Adopts ISO/IEC 14496-18:2004 which specifies functionalities for the communication of font data as part of the MPEG-4 encoded audio-visual presentation. (IT-029)
Specifies requirements and recommendations for the practical implementation of software product evaluation when several parties need to understand, accept and trust evaluation results. This Standard is identical with and has been reproduced from ISO/IEC 145985:1998. (IT-015)
86pp
Adopts ISO/IEC 14496-19:2004 which specifies functionalities for the transmission of Synthesized Texture data as part of the MPEG-4 encoded audio-visual presentation. (IT-029)
AS ISO/IEC 14496.212008 MPEG-J Graphics Framework eXtensions (GFX) (ISO/IEC 14496-21:2006, ISO/IEC 1449621:2006/Cor 1:2007) 40pp
Provides the Australian multimedia industry with a specification of the MPEG-J Graphics framework eXtension (GFX). (IT-029)
AS ISO 146022003 Non-active surgical implantsImplants for OsteosynthesisParticular requirements (ISO 14602:1998) 8pp
Specifies particular requirements for non-active surgical implants for osteosynthesis that are in addition to the requirements outlined in the relevant parts of ISO 14630. The particular requirements proposed are for intended performance, design attributes, materials, design evaluation, manufacturing, sterilization, packaging, and information supplied by the manufacturer. (HE-012)
AS ISO/IEC 14496.82004 Carriage of ISO/IEC 14496 contents over IP networks (ISO/IEC 14496-8:2004) 8pp
Adopts ISO/IEC 14496-8:2004 which specifies transport level functionalities for the communication of interactive audio-visual scenes. (IT-029)
AS ISO/IEC 145162004 Information technologySecurity techniques Guidelines for the use and management of Trusted Third Party services (ISO/IEC TR 14516:2002) 33pp
Adopts ISO/IEC TR 14516:2002 which provides guidance for the use and management of TTPs, a clear definition of the basic duties and services provided, their description and their purpose, and the roles and liabilities of TTPs and entities using their services. (IT-012)
AS ISO 146062006 Surface chemical analysisSputter depth profilingOptimization using layered systems as reference materials (ISO 14606:2000) 15pp
Adopts ISO 14606:2000 to give guidance on the optimization of sputter depth profiling parameters using appropriate single-layered and multi-layered reference materials in order to achieve optimum depth resolution as a function of instrument settings. (CH-016)
335pp
Adopts ISO/IEC 14496-10:2005, which specifies ITU-T Recommendation H.264(ISO/IEC International Standard ISO/IEC 14496-10 video coding. (IT-029)
AS ISO/IEC 14496.112006 Scene description and application engine (ISO/IEC 14496-11:2005) 513pp
Adopts ISO/IEC 14966-11:2005 which specifies the coded representation and behaviour of the spatiotemporal positioning of audio-visual objects, the Extensible MPEG-4 Textual (XMT) format, and a system level description of an application engine. (IT-029)
AS ISO 145342003 Opthalmic opticsContact lenses and contact lens care productsFundamental requirements (ISO 14534:2002) 11pp
Specifies safety and performance requirements for contact lenses, contact lens care products and other accessories for contact lenses. (MS-063)
AS/NZS 14598 Information technologySoftware product evaluation AS/NZS 14598.1:2000 General overview (ISO/IEC 14598-1:1999)
55pp
Adopts ISO/IEC 14496-12:2004 which specifies the ISO base media file format, which is a general format forming the basis for a number of other more specific file formats. This format contains the timing, structure, and media information for timed sequences of media data, such as audio/visual presentations. (IT-029)
19pp
Specifies the framework for evaluating the quality of software product and gives the requirements for methods of software product measurement and evaluation. This Standard is identical with and has been reproduced from ISO/IEC 14598-1:1999. (IT-015)
AS/NZS ISO 14644 Cleanrooms and associated controlled environments AS/NZS ISO 14644.1:2002 Classification and air cleanliness (ISO 14644-1:1999)
AS ISO/IEC 14496.132005 Intellectual Property Management and Protection (IPMP) extensions (ISO/IEC 14496-13:2004) 62pp
Provides users of MPEG-4 systems with the IPMP (Intellectual Property Management and Protection) guidelines, including the syntax and semantics for IPMP control, signalling and data extension. (IT-029)
20pp
12pp
Specifies the requirements, recommendations and guidelines for a supporting function within an organisation which is responsible for the management of software product evaluation and for technologies necessary for software product evaluation. This Standard is identical with and reproduced from ISO/IEC 145982:2000. (IT-015)
Covers the classification of air cleanliness of cleanrooms and associated controlled environments exclusively in terms of concentrations of airborne particles. This Standard is identical with and has been reproduced from ISO 14644-1:1999. (ME-060)
AS/NZS 14644.2:2002 Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 (ISO 14644-2:2000, MOD) 8pp
Specifies requirements for periodic testing of a cleanroom or cleanzone to prove its continued compliance with ISO 14644-1 for the designation classification of airborne particulate cleanliness. This Standard is modified adoption of ISO 14644-2:2000. (ME-060)
11pp
Adopts ISO/IEC 14496-14:2003 which defines MP4 as an instance of the ISO Media File format. (IT-029)
16pp
AS ISO/IEC 14496.152004 Advanced video coding (AVC) file format (ISO/IEC 14496-15:2004) 23pp
Adopts ISO/IEC 14496-15:2004 which specifies the storage format for AVC video streams. (IT-029)
Specifies the guidelines for clarifying quality requirements and for implementing and analysing software quality measures during all phases of the development life cycle. This Standard is identical with (IT-015)
51pp
34pp
Specifies the requirements and recommendations for the systematic measurement, assessment and evalua-
Specifies requirements to provide control of airborne particulate contamination of levels appropriate for accomplishing contamination-sensitive actives. This Standard is identical with, and has been reproduced from, ISO 14644-4:2001. (ME-060)
223
44pp
Adopts of ISO14644-5:2004 to specify basic requirements for cleanroom operations. It is intended for those planning to use and operate a cleanroom. (ME-060)
AS/NZS ISO 14644.7:2006 Separative devices (clean air hoods, gloveboxes, isolators and minienvironments) (ISO 14644-7:2004) 52pp
Adopts of ISO14644-7:2004 to specify the minimum requirements for the design, construction, installation, test and approval of separative devices. (ME-060)
AS/NZS ISO/IEC 14752:2003 Information technologyOpen distributed processingProtocol support for computational interactions (ISO/IEC 14752:2000) 29pp
Based on the framework of abstractions and concepts developed in the Reference Model for Open Distributed Processing. It defines how interactions between computational objects in a computational specification of a system relate to protocol support for those interactions in an engineering specification of that system. (IT-015)
AS ISO 148172004 Transport information and control systems Requirements for an ITS/TICS central Data Registry and ITS/TICS Data Dictionaries (ISO 14817:2002) 92pp
Adopts ISO 14817:2002 which specifies the framework, formats, and procedures used to define information exchanges within the Intelligent Transport System/Transport Information and Control Systems (ITS/TICS) sector. It defines the content of the ITS/TICS central Data Registry and Data Dictionaries, the registration process to enter data concepts into the Data Registry. (IT-023)
AS ISO 14649 Industrial automation systems and integrationPhysical device controlData model for computerized numerical controllers AS ISO 14649.12004 Overview and fundamental principles (ISO 14649-1:2003) 28pp
Adopts ISO 14649-1 which provides an introduction and overview of a data model for Computerized Numerical Controllers and explains its advantages and basic principle, based on the concepts of Product Data. (IT-006)
AS/NZS ISO/IEC 14753:2003 Information technologyOpen distributed processingInterface references and binding (ISO/IEC 14753:1999) 31pp
Provides interface references that embody the information needed to establish bindings, including binding to objects at nodes that support several different communication protocols and binding to objects in different management domains. It further embodies the information required for the engineering mechanism to maintain bindings between computational objects in the presence of distribution transparencies such as migration transparency. (IT-015)
AS/NZS 14841:1999 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsCall offer supplementary service (ISO/IEC 14841:1996) 36pp
Specifies the call offer features applicable to various basic services supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 14841:1996. (IT-016)
176pp
AS/NZS 14756:2001 Information technologyMeasurement and rating of performance of computer-based software systems (ISO/IEC 14756:1999) 49pp
Specifies and defines the user oriented performance values for computer-based software systems. These values are applicable to tests for all time constrained systems or system parts and include execution time, throughput and timeliness. This Standard is identical with and has been reproduced from ISO/IEC 14756:1999. (IT-015)
Adopts ISO 14649-10 which provides the process data which is generally needed for NC-programming within all machining technologies. These data elements describe the interface between a computerized numerical controller and the programming system. (IT-006)
AS/NZS 14842:1999 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsDo not disturb and do not disturb override supplementary services (ISO/IEC 14842:1996) 70pp
Specifies the do not disturb and do not disturb override features applicable to various basic services supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 14842:1996. (IT-016)
77pp
Adopts ISO 14649-11 which provides the technologyspecific data elements needed as process data for milling. Together with the general process data described in AS ISO 14649.10, it describes the interface between a computerized numerical controller and the programming system for milling. (IT-006)
AS/NZS ISO/IEC 14763 Telecommunications installations Implementation and operation of customer premises cabling AS/NZS ISO/IEC 14763.3:2007 Testing of optical fibre cabling 54pp
Adopts ISO/IEC 14763-3:2006 to specify systems and methods for the inspection and testing of optical fibre cabling designed in accordance with AS/NZS 3080 or equivalent standards The test method refers to existing standard-based procedures where they exist. (CT-001)
AS/NZS 14843:1999 Information technologyTelecommunications and information exchange between systems Private integrated services networkInterexchange signalling protocolCall offer supplementary service (ISO/IEC 14843:1996) 35pp
Specifies the signalling protocol for the support of the call offer supplementary service at the Q reference point between private integrated services network exchanges connected together within a private integrated services network. The Q reference point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 14843:1996. (IT-016)
AS ISO 14708 Implants for surgeryActive implantable medical devices AS ISO 14708.12003 General requirements for safety, marking and for information to be provided by the manufacturer (ISO 14708-1:2000) 40pp
Specifies requirements that are generally applicable to active implantable medical devices. For particular types of active implantable medical devices, these general requirements are supplemented or modified by the requirements of particular standards which form additional parts of ISO 14708. Special care is required in applying ISO 14708-1 to active implantable medical devices where no particular standard exists. The tests that are specified in ISO 14708-1 are type tests intended to be carried out on samples of a device to show compliance, and are not intended to be used for the routine testing of manufactured products. Applicable to active implantable medical devices that are electrically powered, devices powered by other energy sources (for example gas pressure or springs) and to some non-implantable parts and accessories of the devices. (HE-012)
AS/NZS ISO/IEC 14769:2003 Information technologyOpen distributed processingType repository function (ISO/IEC 14769:2001) 28pp
Defines a framework for describing types of interest in ODP systems by determining what entities need to be typed and what needs to be said about the identified types. It provides a standard method of accessing type descriptions used within open distributed processing systems, where the type descriptions can be in various concrete syntaxes and type languages used in these open distributed processing systems. It also facilitates the dynamic matching of types for interactions, binding and trading purposes. (IT-015)
AS/NZS 14844:1999 Information technologyTelecommunications and information exchange between systems Private integrated services networkInterexchange signalling protocolDo not disturb and do not disturb override supplementary services (ISO/IEC 14844:1996) 52pp
Specifies the signalling protocol for the support of do not disturb and do not disturb override supplementary services at the Q reference point between private integrated service network exchanges connected together within a private integrated services network. The Q reference point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 14844:1996. (IT-016)
AS/NZS ISO/IEC 14771:2003 Information technologyOpen distributed processingNaming framework (ISO/IEC 14771:1999) 25pp
Provides a general framework for the naming of entities of interest in ODP systems, which includes naming in the infrastructure of an ODP system, naming in the applications built on the infrastructure, and naming in the enterprise the system serves. (IT-015)
AS/NZS 14845:1999 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsCall intrusion supplementary service (ISO/IEC 14845:1996) 73pp
Specifies the call intrusion features applicable to various basic services supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 14845:1996. (IT-016)
AS/NZS ISO/IEC 14750:2003 Information technologyOpen distributed processingInterface definition language (ISO/IEC 14750:1999) 31pp
Provides the ODP Reference Model with a language and environment neutral notation to describe computational op-
224
AS ISO 149762006 Surface chemical analysisData transfer format (ISO 14976:1998) 41pp
Adopts ISO 14976:1998 to specify a format to transfer data from computer via parallel interfaces or via serial interfaces over direct wire, telephone line, local area network or other communication link. (CH-016)
AS/NZS 15052:1999 Information technologyTelecommunications and information exchange between systems Private integrated services networkInterexchange signalling protocolRecall supplementary service (ISO/IEC 15052:1997) 17pp
Specifies the signalling protocol for the support of the recall supplementary service at the Q reference point between private integrated services network exchanges connected together within a private integrated services network. The Q reference point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15052:1997. (IT-016)
AS ISO 149782007 Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment (ISO 14978:2006) 37pp
Adopts ISO 14978:2006 to provide the general requirements for simple measuring equipment to facilitate communication between manufacturers or suppliers and purchasers or users when specifying such equipment. (ME-027)
AS ISO 148522005 Plastic materialsDetermination of the ultimate aerobic biodegradability in an aqueous mediumMethod by analysis of evolved carbon dioxide (ISO 14852:1999) 18pp
Adopts ISO 14852:1999 to specify methods for measuring the amount of carbon dioxide evolved for the determination of the degree of aerobic biodegradability of plastic materials, including those containing formulation additives. (EV-017)
AS/NZS ISO 15004:2002 Ophthalmic instrumentsFundamental requirements and test methods (ISO 15004:1997) 16pp
Specifies requirements for non-invasive, active and nonactive ophthalmic instruments. (HE-003)
AS/NZS 15053:1999 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsCall interception additional network feature (ISO/IEC 15053:1997) 36pp
Specifies the call interception additional network feature applicable to various basic services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15053:1997. (IT-016)
AS ISO 148552005 Plastic materialsDetermination of the ultimate aerobic biodegradability and disintegration under controlled composting conditions Method by analysis of evolved carbon dioxide (ISO 14855:1999) 17pp
Adopts ISO14855:1999 to specify a method for the determination of the ultimate aerobic biodegradability of plastics, based on organic compounds, under controlled composting conditions by measurement of the amount of carbon dioxide evolved and the degree of plastic at the end of test. (EV-017)
AS/NZS ISO/IEC 15018:2005 Information technologyGeneric cabling for homes (ISO/IEC 15018:2004) 73pp
Adopts ISO/IEC 15018:2004 which specifies generic cabling for homes. (CT-001)
AS/NZS 15026:1999 Information technologySystem and software integrity levels (ISO/IEC 15026:1998) 12pp
Specifies requirements for the determination of system and software integrity levels for software products and systems that use software. The Standard also defines the concepts associated with integrity levels, defines the processes for determining integrity levels and software integrity requirements, and places requirements on each process. This Standard is identical with and has been reproduced from ISO/IEC 15026:1998 (IT-015)
AS/NZS 15054:1999 Information technologyTelecommunications and information exchange between systems Private integrated services networkInterexchange signalling protocolCall interception additional network feature (ISO/IEC 15054:1997) 39pp
Specifies the signalling protocol for the support of the call interception additional network feature at the Q reference point between private integrated services network exchanges connected together within a private integrated services network. The Q reference point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15054:1997. (IT-016)
748pp
Provides the requirements for the implementations of the C plus plus programming language. This language is based on the C programming language and provides additional data types, classes, templates, exceptions, namespaces, inline functions, operator and function name overloading references, free store management operators and additional library facilities. This Standard is identical with and reproduced with ISO 14882:1998. (IT-015)
AS ISO 149062005 Road transport and traffic telematics Electronic fee collectionApplication interface definition for dedicated short-range communication (ISO 14906:2004) 111pp
Adopts ISO 14906 which specifies the application interface in the context of Electronic Fee Collection (EFC) systems using the Dedicated Short-Range Communication (DSRC). (IT-023)
AS/NZS 15049:1999 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsAdvice of charge supplementary services (ISO/IEC 15049:1997) 67pp
Specifies the advice of charge features applicable to various basic services supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15049:1997. (IT-016)
AS/NZS 15055:1999 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsTransit counter additional network feature (ISO/IEC 15055:1997) 10pp
Specifies the transit counter additional network feature applicable to various basic services supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. This Standard is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15055:1997. (IT-016)
AS ISO 149492003 Implants for surgeryTwo-part addition-cure silicone elastomers (ISO 14949:2001) 14pp
Specifies the characteristics of, and corresponding test methods for, the two-part addition-cure high consistency or liquid silicone elastomer for use in the manufacture (partially or totally) of surgical implants. (HE-012)
AS/NZS 15050:1999 Information technologyTelecommunications and information exchange between systems Private integrated services networkInterexchange signalling protocolAdvice of charge supplementary services (ISO/IEC 15050:1997) 50pp
Specifies the signalling protocol for the support of the advice of charge supplementary services at the Q reference point between private integrated services network exchanges connected together within a private integratd services network. The Q reference is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15050:1997. (IT-016)
AS/NZS 15056:1999 Information technologyTelecommunciations and information exchange between systems Private integrated services networkInterexchange signalling protocolTransit counter additional network feature (ISO/IEC 15056:1997) 11pp
Specifies the signalling protocol for the support of the transit counter additional network feature at the Q reference point between private integrated services network exchanges connected together within a private integrated services network. The Q reference point is defined in AS/NZS 4136.1:1995. This Standard is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15056:1997. (IT-016)
AS ISO/IEC 149572005 Information technologyNotation of format for data element values (ISO/IEC 14957:1996) 7pp
Adopts ISO/IEC 14957:1996 which specifies the notation to be used for stating the format, i.e. the character types used in the representation of data elements and the length of these representations. It also specifies additional notations relative to the representation of numerical figures. (IT-027)
AS/NZS 15051:1999 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification functional model and information flowsRecall supplementary service (ISO/IEC 15051:1997) 13pp
Specifies the recall feature applicable to various basic services supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15051:1997. (IT-016)
AS/NZS ISO 15161:2003 Guidelines on the application of ISO 9001:2000 for the food and drink industry (ISO 15161:2001) 35pp
Specifies guidance to organizations in applying the requirements of ISO 9001 during the development and implementation of a quality management system in the food and drink industry. This Standard is identical to and has been reproduced from ISO 15161:2001. (QR-008)
225
AS ISO 152252003
AS ISO 152252003 NomenclatureSpecification for a nomenclature system for medical devices for the purpose of regulatory data exchange (ISO 15225:2000) 19pp
Specifies requirements and guidance for the construction of a nomenclature for medical devices in order to facilitate cooperation and exchange of regulatory data between interested parties such as regulatory authorities, manufacturers, suppliers, health care providers and end users. (HE-023)
AS/NZS ISO/IEC 15414:2003 Information technologyOpen distributed processingReference modelEnterprise language (ISO/IEC 15414:2002) 20pp
Provides a language (the enterprise language) comprising concepts, structures and rules for developing, representing, and reasoning about a specification of an ODP system from the enterprise viewpoint. It also provides rules which establish correspondences between the enterprise language and the other viewpoint languages to ensure the overall consistency of a specification. (IT-015)
71pp
Adopts ISO/IEC 15444-6:2003 which specifies a normative but optional file format for storing compound images using the JPEG 2000 file format family architecture. (IT-029)
AS/NZS 15271:1999 Guide for AS/NZS ISO/IEC 12207 ([Information technologySoftware life cycle processes) (ISO/IEC TR 15271:1998) 49pp
Provides users of AS/NZS ISO/IEC 12207 with further explanation in relation to various types of software and indicates which processes may be relevant in reference to contractual situations, on a project irrespective of size or complexity, in an organization as a self-assessment or for software process improvement initiatives. This Standard is identical with and has been reproduced from ISO/IEC TR 15271:1998. (IT-015)
AS ISO/IEC 154182006 Information technologyEAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance (ISO/IEC 15418:1999) 5pp
Adopts ISO/IEC 15418:1999 to provide specific sets of Data and Application Identifiers for the purpose of identifying encoded data and to identify the organizations responsible for their maintenance. (IT-034)
AS ISO/IEC 15444.92006 Interactivity tools, APIs and protocols (ISO/IEC 15444-9:2005) 102pp
Adopts ISO/IEC 15444-9:2005 which defines, in an extensible manner, syntaxes and methods for the remote interrogation and optional modification of JPEG 2000 codestreams. (IT-029)
55pp
AS/NZS 15288:2003 Systems engineeringSystem life cycle processes (ISO/IEC 15288:2002) 62pp
Provides a common process framework covering the life cycle of man-made systems. This life cycle spans the conception of ideas through to the retirement of a system. It provides the processes for acquiring and supplying systems. In addition, this framework provides for the assessment and improvement of the life cycle processes. (IT-015)
AS ISO/IEC 154242006 Information technologyAutomatic identification and data capture techniquesData Carrier Identifiers (including Symbology Identifiers) (ISO/IEC 15424:2000) 14pp
Adopts ISO/IEC 15424:2000 to provide standardization in the reporting of data carriers from bar code readers and other automatic identification equipment for the retail industry. (IT-034)
Adopts ISO/IEC 15444-12:2004 which specifies the ISO base media file format, which is a general format forming the basis for a number of other more specific file formats. This format contains the timing, structure, and media information for timed sequences of media data, such as audio/visual presentations. (IT-029)
AS ISO/IEC 154522005 Information technologySpecification of data value domains (ISO/IEC TR 15452:2000) 24pp
Adopts ISO/IEC TR 15452:2000 which provides identification, specification, development and reuse of enumerated, bounded data value domains for data elements. (IT-027)
AS/NZS ISO/IEC 15289:2007 Systems and software engineeringContent of systems and software life cycle process information products (Documentation) (ISO/IEC 15289:2006) 51pp
Adopts ISO/IEC 15289:2006 to outline a set of processes for managing and performing the stages for systems life cycle, (in conformance with AS/NZS 15288 and AS/NZS ISO/IEC 12207). (IT-015)
AS/NZS ISO/IEC 15437:2003 Information technologyOpen distributed processingEnhancements to LOTOS (ELOTOS) (ISO/IEC 15437:2001) 187pp
Defines the syntax and semantics of the enhanced LOTOS language, named E-LOTOS. E-LOTOS is used for the formal descritpion of the behavioural aspects of distributed and concurrent systems in general and in the area of open distributed processing in particular. (IT-015)
AS ISO/IEC 15459 Information technologyUnique identifiers AS ISO/IEC 15459.12006 Unique identifiers for transport units (ISO/IEC 15459-1:2006) 8pp
Adopts ISO/IEC 15459-1:2006 to provide a unique, non-significant string of characters for the identification of transport units. (IT-034)
AS ISO/IEC 152922004 Information technologySecurity techniques Protection profile registration procedures (ISO/IEC 15292:2001) 14pp
Adopts ISO/IEC 15292:2001 which defines the procedures to be applied by the JTC 1 Registration Authority appointed by the ISO and IEC councils to maintain a register of Protection Profiles and packages for the purposes of IT security evaluation. (IT-012)
AS/NZS ISO/IEC 15443 Information technologySecurity techniques A framework for IT security assurance AS/NZS ISO/IEC 15443.1:2006 Overview and framework (ISO/IEC TR 15443-1:2005)
10pp
23pp
AS ISO/IEC 15408 Information technologySecurity techniques Evaluation criteria for IT security AS ISO/IEC 15408.12004 Introduction and general model (ISO/IEC 15408-1:1999)
Adopts ISO IEC TR 15443-1:2005 to present a variety of assurance methods, and to guide the IT Security Professional in the selection of an appropriate assurance method (or combination of methods) to achieve confidence that a given deliverable satisfies its stated IT security assurance requirements. (IT-012)
Adopts ISO/IEC 15459-2:2006 to provide the procedural requirements to maintain a non-significant, unique identifier for item management applications, and outlines the obligations of the Registration Authority and Issuing Agencies. (IT-034)
53pp
AS ISO/IEC 15444 Information technologyJPEG 2000 image coding system AS ISO/IEC 15444.12004 Core coding system (ISO/IEC 15444-1:2000, ISO/IEC 154441:2000/Amd 1:2002, ISO/IEC 154441:2000/Cor 1:2002, ISO/IEC 154441:2000/Cor 2:2002, ISO/IEC 154441:2000/Cor 3:2002) 244pp
Adopts ISO/IEC 15444-1:2000, including Amendment 1 and Corrigenda 1 to 3, which defines a set of lossless (bit-preserving) and lossy compression methods for coding bi-level, continuous-tone grey-scale, palletised colour, or continuous-tone colour digital still images. (IT-029)
3pp
Adopts ISO/IEC 15408-1:1999 which defines criteria, which for historical and continuity purposes are referred to herein as the Common Criteria (CC), to be used as the basis for evaluation of security properties of IT products and systems. By establishing such a common criteria base, the results of an IT security evaluation will be meaningful to a wider audience. The CC will permit comparability between the results of independent security evaluations. (IT-012)
Adopts ISO/IEC 15459-3:2006 to provide the common rules that apply for unique identifiers for item management that are required to ensure full compatibility across classes of unique identifiers for RFID users. (IT-034)
AS ISO/IEC 15459.42006 Unique identifiers for supply chain management (ISO/IEC 15459-4:2006) 6pp
Adopts ISO/IEC 15459-4:2006 to provide a unique, non-significant, string of characters for the unique identifier for supply chain management with a character string intended to be represented in a bar code label or other AIDC media attached to the item to meet supply chain management needs. (IT-034)
343pp
Adopts ISO/IEC 15408-2:1999 which defines security functional componentsthe basis for the Target of Evaluation (TOE), the requirements expressed in a Protection Profile (PP) or a Security Target (ST). These requirements describe the desired security behavior expected of a TOE and are intended to meet the security objectives as stated in a PP or an ST; security properties that users can detect by direct interaction with the TOE (i.e., inputs, outputs) or by the TOE's response to stimulus. (IT-012)
321pp
Adopts ISO/IEC 15444-2:2004 which defines a set of lossless (bit-preserving) and lossy compression methods for coding continuous-tone, bi-level, grey scale, colour digital still images, or multi-component images. (IT-029)
AS ISO 154702006 Surface chemical analysisX-ray photoelectron spectroscopyDescription of selected instrumental performance parameters (ISO 15470:2004) 4pp
Adopts ISO 15470:2004 to provide a basic list of specific aspects of the performance of an X-ray photoelectron spectrometer. (CH-016)
213pp
50pp
Adopts ISO/IEC 15408-3:1999 which defines the assurance requirements of ISO/IEC 15408. (IT-012)
Adopts ISO/IEC 15444-4:2002 which specifies the framework, concepts, methodology for testing, and criteria to be achieved to claim compliance to ITU-T Recommendation T.800 ISO/IEC 15444.1. It provides a framework for specifying abstract test suites and for
AS ISO 154722006 Surface chemical analysisX-ray photoelectron spectrometersCalibration of energy scales (ISO 15472:2001) 27pp
Adopts ISO 15472:2001 to specify a method for calibrating the binding-energy scales of X-ray photoelectron spectrometers for general analytical purposes. (CH-016)
226
17pp
19pp
Introduces the CDIF family of standards and defines the terms common to the CDIF family of standards. (IT-015)
Provides best practice records management policies and procedures to ensure that appropriate attention and protection is given to all records, and that the evidence and information they contain can be retrieved more efficiently and effectively. (IT-021)
46pp
Includes the definition of the CDIF meta-metamodel and describes the rules and notations used throughout the CDIF family of standards. The rules for extending the CDIF semantic metamodel are also defined. (IT-015)
39pp
AS/NZS 15507:1999 Information technologyTelecommunications and information exchange between systems Private integrated services networkInterexchange signalling protocolPINX clock synchronization (ISO/IEC 15507:1997) 15pp
Specifies the signalling protocol for the support of the clock synchronization between private inetegrated service network exchanges connected together within a private integrated services network. This Standard is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15507:1997. (IT-016)
AS/NZS ISO/IEC 15475 Information technologyCDIF transfer format AS/NZS ISO/IEC 15475.1:2003 General rules for syntaxes and encodings (ISO/IEC 15475-1:2002) 15pp
Describes the way that CDIF metamodels are concretely represented during a transfer and the way that CDIF supports multiple exchange syntaxes and encodings. (IT-015)
Provides guidelines that are supplementary to AS ISO 15489.1 that apply to records in any format or media, created or received by any public or private organization during the course of its activities. (IT-021)
AS/NZS ISO/IEC 15504 Information technologyProcess assessment AS/NZS ISO/IEC 15504.1:2005 Concepts and vocabulary (ISO/IEC 15504-1:2004)
19pp
Adopts ISO/IEC 15504-1:2004 which provides overall information on the concepts of process assessment and its use in the two contexts of process improvement and process capability determination. (IT-015)
AS/NZS ISO 15511:2004 Information and documentationInternational Standard Identifier for Libraries and Related Organizations (ISIL) (ISO 15511:2003) 5pp
Adopts ISO 15511:2003 which defines and promotes the use of a set of standard identifiers for the unique identification of libraries and related organizations with a minimum impact on already existing systems. (IT-019)
29pp
(IT-015)
16pp
20pp
Describes the standard CDIF transfer encoding for the standard CDIF transfer syntax. (IT-015)
Adopts ISO/IEC 15504-2:2003 which specifies the assessment of process and the application of process assessment for improvement and capability determination. It defines the minimum set of requirements for performing an assessment that will ensure assessment results are objective, impartial, consistent, repeatable and representative of the assessed processes. (IT-015)
AS/NZS ISO/IEC 15476 Information technologyCDIF semantic metamodel AS/NZS ISO/IEC 15476.1:2003 Foundation (ISO/IEC 15476-1:2002)
11pp
Defines the Foundation subject area of the CDIF semantic metamodel. This subject area contains the basic objects on which all other objects, including those defined using extensibility, must be based. (IT-015)
AS/NZS ISO/IEC 15504.4:2005 Guidance on use for process improvement and process capability determination (ISO/IEC 15504-4:2004) 33pp
Adopts ISO/IEC 15504-4:2004 which provides guidance on how to utilize a conformant process assessment within a process improvement programme or a process capability determination. (IT-015)
AS 15693 Identification cardsContactless integrated circuit(s) cardsVicinity cards AS 15693.12003 Physical characteristics (ISO/IEC 15693-1:2000)
6pp
41pp
Defines the Common Subject Area of the CDIF semantic metamodel. This subject area contains metaobjects that are used as the basis of the other subject area standards, and also meta-relationships and metaattributes that are applicable to all meta-objects. (IT-015)
Provides the physical characteristics of vicinity cards and applies to identification cards of the card type ID1 operating in the vicinity of a coupling device. (IT-012)
AS/NZS ISO/IEC 15504.5:2006 An exemplar Process Assessment Model (ISO/IEC 15504-5:2006) 162pp
Adopts ISO/IEC 15504-5:2006 to provide an example of a Process Assessment Model for use in performing a conformant assessment with the requirements of ISO/IEC 15504-2. (IT-015)
AS 15693.22003 Air interface and initialization (ISO/IEC 15693-2:2000, ISO/IEC 156932:2000/Cor 1:2001) 14pp
Specifies the nature and characteristics of the fields to be provided for power and bi-directional communications between vicinity coupling devices (VCO's) and vicinity cards (VICC's). (IT-012)
88pp
Adopt ISO/IEC 15476-3:2006 to provide modelling tools as meta-data repositories with a definition of Data Definition Subject area of the CDIF semantic meta-model. (IT-015)
113pp
Adopts ISO/IEC 15476-4:2005 to provide modelling tools and meta tape repositories with defin-tion of the portion of the CDIF semantic metamodel that supports general tape modelling. (IT-015)
AS/NZS 15505:1999 Information technologyTelecommunications and information exchange between systems Private integrated services network Specification, functional model and information flowsMessage waiting indication supplementary service (ISO/IEC 15505:1997) 16pp
Specifies the message waiting indication features applicable to various basic services supported by private integrated services networks. The basic services are specified in AS/NZS 4135:1995. This Standard is one of a series of Standards applicable to private integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15505:1997. (IT-016)
17pp
AS/NZS ISO 15706:2004 Information and documentationInternational Standard Audiovisual Number (ISAN) (ISO 15706:2002) 12pp
Adopts ISO 15706:2002 which defines a voluntary standard numbering system for the unique and international identification of audiovisual works. (IT-019)
Adopts ISO/IEC 15476-6:2006 to provide modelling tools and meta-data repositories with a definition of the State/Event Subject Area of the CDIF semantic metamodel. (IT-015)
AS/NZS 15506:1999 Information technologyTelecommunications and information exchange between systems Private integrated services networkInterexchange signalling protocolMessage waiting indication supplementary service (ISO/IEC 15506:1997) 26pp
Specifies the signalling protocol for the support of the message waiting indication supplementary service at the Q ref-
AS/NZS ISO 15707:2004 Information and documentationInternational Standard Music Work Code (ISWC) (ISO 15707:2001) 10pp
Adopts ISO 15707:2001 which specifies a means of uniquely identifying a musical work. It standardizes and promotes internationally the use of a standard identification
227
AS ISO 15745.12004
code so that musical works can be uniquely distinguished from one another within computer databases and related documentation and for the purposes of collecting societies involved in the administration of rights to such works. (IT-019)
AS/NZS 15938 Information technologyMultimedia content description interface AS/NZS 15938.1:2003 Systems (ISO/IEC 15938-1:2002)
AS ISO/IEC 15944.12005 Business operational aspects of Open-edi for implementation (ISO/IEC 15944-1:2002) 267pp
Adopts ISO/IEC 15944-1:2002 which contains a methodology and tool for specifying common business practices as parts of common business transactions. (IT-027)
AS ISO 15745 Industrial automation systems and integrationOpen systems application integration framework AS ISO 15745.12004 Generic reference description (ISO 15745-1:2003)
85pp
Specifies a series of interfaces from system to application level to allow disparate systems to interchange information about multimedia content. (IT-029)
31pp
Adopts ISO 15745-1 which provides an application integration frameworka set of elements and rules for describing integration models and application interoperability profiles. (IT-006)
37pp
AS ISO/IEC 159472004 Information technologySecurity techniques IT intrusion detection framework (ISO/IEC TR 15947:2002) 22pp
Adopts ISO/IEC TR 15947:2002 which defines a framework for detection of intrusions in IT systems. (IT-012)
Specifies the language for defining the standard set of description tools (DSs, Ds, and datatypes) and for defining new description tools. (IT-029)
AS ISO 15745.22004 Reference description for ISO 11898based control systems (ISO 15745-2:2003) 163pp
Adopts ISO 15745-2 which provides the specific elements and rules for describing both communication network profiles and the communication related aspects of device profiles specific to ISO 11898-based control systems. (IT-006)
175pp
Specifies tools for description of visual content; including still images, video and 3D models. (IT-029)
AS ISO/IEC 159612006 Information technologyRadio frequency identification (RFID) for item management Data protocol: application interface (ISO/IEC 15961:2004) 82pp
Adopts ISO/IEC 15961:2004 to provides guidelines on how data are to be presented as objects during the interface between a RFID item management application and the data protocol processor. To be used in conjunction with AS ISO/IEC 15962. (IT-034)
106pp
AS ISO 15745.32004 Reference description for IEC 61158based control systems (ISO 15745-3:2003) 269pp
Adopts ISO 15745-3 which provides the technology specific elements and rules for describing both communication network profiles and the communication related aspects of device profiles specific to IEC 61158-based control systems. (IT-006)
Specifies description tools that pertain to multimedia in the audio domain. (IT-029)
730pp
Specifies the Multimedia Description Schemes (MDS) description tools (Description Schemes, Descriptors and datatypes) that comprise ISO/IEC 15938-5. (IT-001)
AS ISO/IEC 159622006 Information technologyRadio frequency identification (RFID) for item management Data protocol: data encoding rules and logical memory functions (ISO/IEC 15962:2004) 64pp
Adopts ISO/IEC 15962:2004 to provide the overall process and the methodologies developed to format the application data into a structure to store on an RF tag and to define the encoded structure of RF object identifiers and specify formatting rules for data. To be used with AS ISO/IEC 15961. (IT-034)
AS ISO 15745.42004 Reference description for Ethernet-based control systems (ISO 15745-4:2003) 125pp
Adopts ISO 15745-4 which provides the technology specific elements and rules for describing both communication network profiles and the communication related aspects of device profiles specific to Ethernetbased control systems. (IT-006)
23pp
Specifies simulation software for tools defined in Parts 1,2,3,4 and 5 of AS(NZS) 15938. This software has been derived from the verification models used in the process of developing of the Standard. (IT-029)
AS ISO/IEC 159632006 Information technologyRadio frequency identification for item managementUnique identification for RF tags (ISO/IEC 15963:2004) 10pp
Adopts ISO/IEC 15963:2004 to provide a description of the numbering systems that are available for the identification of RF tags for Australian industry using radio frequency identification. (IT-034)
AS ISO 158012006 Electronic imagingInformation stored electronicallyRecommendations for trustworthiness and reliability (ISO/TR 15801:2004) 38pp
Adopts ISO/TR 15801:2004 which describes the implementation and operation of information management systems which store information electronically and where the issues of trustworthiness, reliability, authenticity and integrity are important. (IT-021)
33pp
19pp
Adopts ISO/IEC 15938-9:2005 which collects standard profiles and levels for MPEG-7, specified across all ISO/IEC 15938 parts. (IT-029)
AS ISO 160612003 Instrumentation for use in association with non-active surgical implantsGeneral requirements (ISO 16061:2000) 19pp
Specifies general requirements for instruments to be used in association with non-active surgical implants. These requirements apply to instruments when they are manufactured and when they are resupplied after refurbishment. (HE-012)
AS/NZS ISO 15836:2004 Information and documentationThe Dublin Core metadata element set (ISO 15836:2003) 6pp
Adopts ISO 15836:2003 which provides a wide variety of information providers in the arts, sciences, education, business and government sectors with guidelines for cross domain information resource description. (IT-019)
316pp
AS/NZS ISO/IEC 15909 Software and system engineeringHigh-level Petri nets AS/NZS ISO/IEC 15909.1:2006 Concepts, definitions and graphical notation (ISO/IEC 15909-1:2004) 38pp
Adopts ISO/IEC 15909-1:2004 which specifies and defines a Petri net techniques, including its syntax and semantics. It provides a reference definition that can be used both within and between organisations, to ensure a common understanding of the techniques and of the specifications written using the technique. (IT-015)
Adopts ISO/IEC 15938-10:2005 which specifies the schema definition across all parts of ISO/IEC15938 and collects the description tools specified in ISO/IEC15938, assigns a namespace designator, and specifies the resulting syntax description in a single schema using description definitions language from ISO/IEC15938-2. (IT-029)
AS/NZS ISO/IEC 16085:2007 Information technologySystems and software engineeringLife cycle processesRisk management (ISO/IEC 16085:2006) 34pp
Adopts ISO/IEC 16085:2006 to specify a process for the management of risk during software acquisitions, supply, development, operations and maintenance. (IT-015)
75pp
Adopts ISO/IEC TR 15938-11:2005 which specifies the actual schema in XSD form for each of the ISO/IEC 15938-9 standard description profiles, namely the Simple Metadata Profile (SMP), User Description Profile (UDP), and the Core Description Profile (CDP). (IT-029)
AS ISO 16100 Industrial automation systems and integrationManufacturing software capability profiling for interoperability AS ISO 16100.12004 Framework (ISO 16100-1:2002)
52pp
AS/NZS ISO/IEC 15910:2004 Information technologySoftware user documentation process (ISO/IEC 15910:1999) 52pp
Adopts ISO/IEC 15910 which specifies the minimum process for creating all forms of user documentation for software which has a user interface. (IT-015)
Adopts ISO 16100-1 which provides a framework for the interoperability of a set of software products used in the manufacturing domain and to facilitate its integration into a manufacturing application. This framework addresses information exchange models, software object models, interfaces, services, protocols, capability profiles, and conformance test methods. (IT-006)
17pp
Adopts ISO 16100-2 which provides a methodology for constructing profiles of manufacturing software
228
AS ISO 161012007 Transport packaging for dangerous goods Plastics compatibility testing (ISO 16101:2004) 67pp
Adopts ISO 16101:2004 which specifies requirements and test methods for compatibility testing of polyethylene-based plastics packagings and composite packagings with plastic inners containing liquids. Testing involves storage with the packaged substances, or with a standard liquid as defined in Annex A. Annex B describes small-scale laboratory tests which may be used to determine the assimilation of those products to be carried with the Standard liquids. (CH-009)
AS ISO 169492003 Quality management systemsParticular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations (ISO/TS 16949:2002) 34pp
Amendment 1 17 March 2004 Specifies the quality management system requirements for the design and development, production and, when relevant, installation and service of automotive-related products in conjunction with ISO 9001:2000. This Standard is identical with and reproduced from ISO/TS 16949:2002. (QR-008)
AS ISO/IEC 17050 Conformity assessmentSuppliers declaration of conformity AS ISO/IEC 17050.12005 General requirements (ISO/IEC 17050-1:2004)
6pp
Specifies general requirements for a suppliers declaration of conformity in cases where it is desirable, or necessary, that conformity of an object to the specified requirements be attested, irrespective of the sector involved. Identical with and reproduced from ISO/IEC 17050-1: 2004. (QR-010)
AS ISO 161032007 Transport packaging for dangerous goods Recycled plastics material (ISO 16103:2005) 8pp
Adopts ISO 16103:2005 as an Australian Standard. Specifies requirements and test methods for recycled plastics materials to be used as transport packagings for dangerous goods, including guidance on a quality assurance program. (CH-009)
AS ISO/IEC 170002005 Conformity assessmentVocabulary and general principles (ISO/IEC 17000:2004) 14pp
Specifies general terms and definitions relating to conformity assessment, including the accreditation of conformity assessment bodies, and to the use of conformity assessment to facilitate trade. Identical with and reproduced from the English language part of ISO/IEC 17000:2004. (QR-010)
2pp
Specifies general requirements for supporting documentation to substantiate a suppliers declaration of conformity. Identical with and reproduced from ISO/IEC 17050-2: 2004. (QR-010)
AS ISO 161042007 Transport packaging for dangerous goods Test methods (ISO 16104:2003) 48pp
Adopts ISO 16104:2003 as an Australian Standard, specifying design type test requirements for packagings intended to be used for the transport of dangerous goods. (CH-009)
AS ISO/IEC 170102003 General requirements for bodies providing accreditation of inspection bodies (ISO/IEC TR 17010:1998) 12pp
Specifies requirements for bodies providing accreditation of inspection bodies so the accreditations granted, services covered and the body operating the accreditation system are recognized as reliable and competent. This Standard is identical with and reproduced from ISO/IRC TR 17010:1998. (QR-010)
AS ISO 17090 Health informaticsPublic key infrastructure AS ISO 17090.12003 Framework and overview (ISO/TS 17090-1:2002)
33pp
AS ISO 161062007 Transport packages for dangerous goods Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings Guidelines for the application of ISO 9001 (ISO 16106:2006) 27pp
Adopts ISO 16106:2006 as an Australian Standard. Provides guidance on quality management provisions applicable to the manufacturer, measuring and monitoring of design type approved dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings. The Standard is intended to be used in conjunction with AS/NZS ISO 9001:2000. This Standard does not apply to design type testing, which is addressed in the United Nations document titled Recommendations on the Transport of Dangerous Goods-Model Regulations. (CH-009)
AS ISO/IEC 170112005 Conformity assessmentGeneral requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2004) 21pp
Specifies general requirements for use by accreditation bodies when assessing and accrediting conformity assessment bodies. Identical with and reproduced from ISO/IEC 17011: 2004. (QR-010)
Defines the basic concepts of a healthcare public key infrastructure (PKI) and to provide a scheme of interoperability requirements to establish a PKI enabled secure communication of health information. It also identifies the major stakeholders who are communicating in health, as well as the main security services required for health communication where PKI may be required. (IT-014)
26pp
AS/NZS ISO/IEC 17020:2000 General criteria for the operation of various types of bodies performing inspection (ISO/IEC 17020:1998) 12pp
Provides general requirements for the operation of bodies that perform inspections, and criteria for independence. It does not cover testing laboratories, certification bodies or suppliers' declarations of conformity. Identical with and reproduced from ISO/IEC 17020:1998. (QR-010)
Specifies the certificate profiles required to interchange healthcare information within a single organization, between different organizations and across jurisdictional boundaries. It detials the use made of public key infrastyructure (PKI) digital certificates in the health industry and focuses, in particular, on specific healthcare issues relating to certificate profiles. (IT-014)
AS ISO 16269 Statistical interpretation of data AS ISO 16269.72004 MedianEstimation and confidence intervals (ISO 16269-7:2001) 11pp
Adopts ISO 16269-7:2001 which specifies the procedure for establishing a point estimate and confidence intervals for the median of any continuous probability distribution of a population, based on a random sample size from the population. (QR-008)
AS ISO/IEC 170242004 Conformity assessmentGeneral requirements for bodies operating certification of persons (ISO/IEC 17024:2003) 10pp
Specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for persons. Identical with and reproduced from ISO/IEC 17024:2003. (QR-010)
AS/NZS ISO/IEC 16326:2006 Software engineeringGuide for the application of ISO/IEC 12207 to project management (ISO/IEC TR 16326:1999) 30pp
Adopts ISO/IEC TR 16326:1999 to supplement AS/NZS ISO/IEC 12207 in the area of Management Process. (IT-015)
AS ISO/IEC 170252005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005) 28pp
Amendment 1 28 December 2006 Specifies the general requirements for the competence to carry out tests and/or calibrations, including sampling. It covers testing and calibration performed using standard methods, non-standard methods, and laboratory-developed methods. (QR-010)
AS ISO 175602006 Surface chemical analysisSecondary-ion mass spectrometryMethod for depth profiling of boron in silicon (ISO 17560:2002) 10pp
Adopts ISO 17560:2002 to specify a secondary-ion mass spectrometric method using magnetic-sector or quadrupole mass spectrometers for depth profiling of boron in silicon and using stylus profilometry or optical interferometry for depth scale calibration. (CH-016)
AS ISO 164672007 Transport packages for dangerous goods Test methods for IBCs (ISO 16467:2003) 31pp
Adopts ISO 16467:2003 which specifies the design type test requirements for intermediate bulk containers (IBCs) intended for use in the transport of dangerous goods. (CH-009)
AS ISO/IEC 170302004 Conformity assessmentGeneral requirements for third-party marks of conformity (ISO/IEC 17030:2003) 5pp
Provides general requirements for third-party marks of conformity, including their issue and use. Identical with and reproduced from ISO/IEC17030:2003. (QR-010)
AS ISO 169292008 PlasticsDetermination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test (ISO 16929:2002, MOD) 11pp
Adopts ISO 169292002 to determine the degree of disintegration of plastic material in a pilot-scale aerobic composting test under defined conditions. (EV-017)
AS/NZS ISO 17632:2006 Welding consumablesTubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steelsClassification (ISO 17632:2004, MOD) 32pp
Specifies a classification system for tubular cored electrodes in terms of tensile properties, impact properties, chemical composition of the all-weld metal, type of electrode core, shielding gas and welding position. (WD-002)
AS ISO/IEC 170402005 Conformity assessmentGeneral requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005) 13pp
Specifies the general requirements for use, by agreement, by groups of peers performing any assessments of accreditation bodies or conformity assessment bodies. Identical with and reproduced from ISO/IEC 17040: 2005. (QR-010)
AS/NZS ISO 17633:2006 Welding consumablesTubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steelsClassification (ISO 17633:2004, MOD) 28pp
Specifies a classification system for tubular cored electrodes and rods for welding stainless steels. (WD-002)
229
AS ISO/IEC 18000.72007 Parameters for active air interface communications at 433 MHz (ISO/IEC 18000-7:2004) 20pp
Adopts ISO/IEC 18000-7:2004 to provide a common technical specification for RFID devices operating as an active RF Tag in the 433 MHz band, used in item management applications. (IT-034)
43pp
AS/NZS ISO/IEC 17799:2001 Information technologyCode of practice for information security management (ISO/IEC 17799:2000) 71pp Available Superseded
Amendment 1 22 March 2004 Provides recommendations for information security management for use by those who are responsible for initiating, implementing or maintaining security in their organization. (IT-012)
AS/NZS ISO/IEC 18019:2007 Software and system engineeringGuidelines for the design and preparation of user documentation for application software (ISO/IEC 18019:2004) 146pp
Adopts ISO/IEC 18019:2004 to provide guidelines for the design and preparation of user documentation for application software. (IT-015)
AS/NZS ISO/IEC 18044:2006 Information technologySecurity techniques Information security incident management (ISO/IEC TR 18044:2004) 50pp
Adopts ISO/IEC TR 18044:2004 which provides advice and guidance on information security incident management for information security managers, and information system, service and network managers. (IT-012)
AS/NZS ISO 17933:2004 Generic electronic document interchange (ISO 17933:2000) 41pp
Adopts ISO 17933:2000 which specifies a format for exchange of electronic document copies between computer systems. The format includes a definition of a GEDI header containing information about the request, supplier and format of the document and relevant bibliographic information. (IT-019)
AS/NZS ISO/IEC 18028 Information technologySecurity techniques IT network security AS/NZS ISO/IEC 18028.1:2008 Network security management (ISO/IEC 18028-1:2006)
AS ISO/IEC 180462007 Information technologyAutomatic identification and data capture techniquesRadio frequency identification device performance test methods (ISO/IEC TR 18046:2005) 36pp
Adopts ISO/IEC TR 18046:2005 to provide test method guidelines for performance characteristics of radio frequency identification (RFID) devices (tags and interrogation equipment) for item management, and to specify the general requirements and test requirements for tag and interrogator performance which are applicable to the selection of the devices for an application. (IT-034)
59pp
Adopts ISO/IEC 18028-1:2006 to align the Australian approach to network-security with worlds best practice. (IT-012)
AS ISO 179742006 Surface chemical analysisHigh-resolution Auger electron spectrometersCalibration of energy scales for elemental and chemicalstate analysis (ISO 17974:2002) 27pp
Adopts ISO 17974:2002 to specify a method for calibrating the kinetic scales of Auger electron spectrometers used for elemental and chemical state analysis at surfaces. (CH-016)
21pp
Adopts ISO/IEC 18028-2:2006 to provide detailed guidance on the security aspect of the management operation use of IT networks, and their interconnections. Particularly relevant to all personnel who are involved in the planning, design and implementation of the architectural aspects of network security. (IT-012)
AS ISO/IEC 18047 Information technologyRadio frequency identification device conformance test methods AS ISO/IEC 18047.32006 Test methods for air interface communications at 13.56 MHz (ISO/IEC TR 18047-3:2004) 33pp
Adopts ISO/IEC TR 18047-3:2004 to provide test methods for determining the conformance of radio frequency identification devices (tags and interrogators) for item management with the specifications given in the corresponding part of AS ISO/IEC 18000. (IT-034)
AS ISO/IEC 18000 Information technologyRadio frequency identification for item management AS ISO/IEC 18000.12007 Reference architecture and definition of parameters to be standardized (ISO/IEC 18000-1:2004) 73pp
Adopts ISO/IEC 18000-1:2004 to provide a description of the generic architecture concepts in which item identification may commonly be required within the logistics and supply chain and defines the parameters that need to be determined in any standardized air interface definition. (IT-034)
AS/NZS ISO/IEC 18028.3:2006 Securing communications between networks using security gateways (ISO/IEC 18028-3:2005) 22pp
Adopts ISO/IEC 18028-3:2005 to provide detailed guidance on the security aspects of the management, operation and use of IT networks, and their interconnections. Specifically defines techniques for securing information flows between networks using security gateways. (IT-012)
AS ISO/IEC 18047.42006 Test methods for air interface communications at 2.45 GHz (ISO/IEC TR 18047-4:2004) 11pp
Adopts ISO/IEC TR 18047-4:2004 to provide test methods for determining the conformance of radio frequency identification devices (tags and interrogators) for item management with the specifications given in the corresponding part of AS ISO/IEC 18000. (IT-034)
43pp
AS ISO/IEC 18000.22007 Parameters for air interface communications below 135 kHz (ISO/IEC 18000-2:2004) 71pp
Adopts ISO/IEC 18000-2:2004 to provide a common technical specification for RFID devices operating below 135 kHz to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. (IT-034)
Adopts ISO/IEC 18028-4:2005 which specifies the different types of remote access including the protocols in use, discusses the authentication issues related to remote access and provides support when setting up remote access securely. (IT-012)
AS/NZS ISO/IEC 18028.5:2008 Securing communications across networks using virtual private networks (ISO/IEC 18028-5:2006) 21pp
Adopts ISO/IEC 18028-5:2008 to align Australian procedures for securing communications across VPN (Virtual Private Networks). (IT-012)
AS ISO/IEC 18047.72006 Test methods for active air interface communications at 433 MHz (ISO/IEC TR 18047-7:2005) 14pp
Adopts ISO/IEC TR 18047-7:2005 to provide test methods for determining the conformance of radio frequency identification devices (tags and interrogators) for item management with the specifications given in AS ISO/IEC 18000.7. (IT-034)
AS ISO/IEC 18000.32007 Parameters for air interface communications at 13.56 MHz (ISO/IEC 18000-3:2004) 145pp
Adopts IOS/IEC 18000-3:2004 to provide a physical layer, collision management system and protocol values for RFID systems for Item Identification operating at 13.56 MHz. (IT-034)
AS/NZS ISO/IEC 18033 Information technologySecurity techniques Encryption algorithms AS/NZS ISO/IEC 18033.1:2006 General (ISO/IEC 18033-1:2005)
AS ISO 181142006 Surface chemical analysisSecondary-ion mass spectrometryDetermination of relative sensitivity factors from ion-implanted reference materials (ISO 18114:2003) 4pp
Adopts ISO 18114:2003 to specify a method for determining relative sensitivity factors from ion-implanted reference materials. (CH-016)
8pp
AS ISO/IEC 18000.42007 Parameters for air interface communications at 2.45 GHz (ISO/IEC 18000-4:2004) 98pp
Adopts ISO/IEC 18000-4:2004 to provide a common technical specification for RFID devices operating in the 2.45 GHz Industrial, Scientific, and Medical (ISM) band used in item management applications. (IT-034)
Adopts ISO/IEC 18033-1:2005 which provides definitions that apply in subsequent parts of ISO/IEC 18033. The nature of encryption is introduced, and certain general aspects of its use and properties are described. (IT-012)
72pp
Adopts ISO 18115:2001 to define terms used in surface chemical analytical techniques. (CH-016)
125pp
AS ISO/IEC 18000.62007 Parameters for air interface communications at 860 MHz to 960 MHz (ISO/IEC 18000-6:2004) 134pp
Adopts ISO/IEC 18000-6:2004 to provide a common technical specification for RFID devices to operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. (IT-034)
Adopts ISO/IEC 18033-2:2006 to make available to the Australian market the latest versions of approved asymmetric ciphers. (IT-012)
AS ISO 181162006 Surface chemical analysisGuidelines for preparation and mounting of specimens for analysis (ISO 18116:2005) 16pp
Adopts ISO 18116:2005 to provide guidance on methods of mounting and surface treatment for a specimen about to undergo surface chemical analysis. (CH-016)
71pp
230
AS ISO 19005 Document managementElectronic document file format for long-term preservation AS ISO 19005.12006 Use of PDF 1.4 (PDF/A-1) (ISO 19005-1:2005)
This Standard defines conceptual schema for the description of spatial referencing by coordinates, optionally extended to spatial-temporal referencing. (IT-004)
29pp
Amendment 1 13 November 2007 Adopts ISO 19005-1:2005 which specifies how to use the Portable Document Format (PDF) 1.4 for longterm preservation of electronic documents. It is applicable to documents containing combinations of character, raster and vector data. (IT-021)
AS/NZS ISO 19112:2005 Geographic informationSpatial referencing by geographic identifiers (ISO 19112:2003) 19pp
Adopts ISO 19112:2003 which specifies the conceptual schema for spatial references based on geographic identifiers. (IT-004)
AS/NZS ISO 18273:2006 Welding consumablesWire electrodes, wires and rods for welding of aluminium and aluminium alloysClassification (ISO 18273:2004) 7pp
Specifies requirements for classification of solid wires and rods for fusion welding of aluminium and aluminium alloys. Identical to, and reproduced from, ISO18273:2004. (WD-002)
AS/NZS ISO 19011:2003 Guidelines for quality and/or environmental management systems auditing (ISO 19011:2002) 31pp
Provides guidance on the principles of auditing, managing audit programmes, conducting quality management systems audits and environmental management system audits, as well as guidance on the competence of quality and environmental management system auditors. (QR-006)
AS/NZS ISO 18276:2006 Welding consumablesTubular cored electrodes for gas shielded and non-gas shielded metal arc welding of high-strength steels Classification (ISO 18276:2005, MOD) 27pp
Specifies a classification system for tubular cored electrodes with or without a gas shield for metal arc welding of high-strength steels in the as-welded condition or in the post-weld heat-treated condition with a minimum yield strength higher than 550 MPa or a minimum tensile strength higher than 590 MPa. (WD-002)
AS/NZS ISO 19103:2006 Geographic informationConceptual schema language (ISO/TS 19103:2005) 67pp
Adopts ISO/TS 19103:2005 which provides rules and guidelines for the use of a conceptual schema language within the ISO geographic information standards. (IT-004)
140pp
AS ISO 183082005 Health InformaticsRequirements for an electronic health record architecture (ISO/TS 18308:2004, MOD) 30pp
Adopts (with national modifications ) ISO/TS 18308:2004, which technically specifies how to assemble and collate a set of clinical and technical requirements for an electronic health record architecture (EHRA) that supports using, sharing, and exchanging electronic health records across different health sectors, different countries, and different models of healthcare delivery. Requirements for the architecture are given but not the specifications of the architecture itself. (IT-014)
AS/NZS ISO 19105:2002 Geographic informationConformance and testing (ISO 19105:2000) 21pp
Provides users of the ISO 19100 series of Standards with the framework, concepts, and criteria to be achieved to claim conformance to those Standards. (IT-004)
Amendment 1 31 October 2008 Adopts ISO 19115:2003 which specifies the schema required for describing geographic information and services. It provides information about the identification, the extent, the quality, the spatial and temporal schema, spatial reference, and distribution of digital geographic data. (IT-004)
32pp
AS ISO 184922006 Long-term preservation of electronic document-based information (ISO/TR 18492:2005) 18pp
Adopts ISO/TR 18492:2005 which provides practical methodological guidance for the long-term preservation and retrieval of authentic electronic document-based information, when the retention period exceeds the expected life of the technology (hardware and software) used to create and maintain the information. (IT-021)
Adopts ISO 19106:2004 which specifies the concept of a profile of the ISO geographic information standards developed by ISO/TC 211 and provides guidance for the creation of such profiles. (IT-004)
39pp
Adopts ISO 19117:2005 which defines a schema describing the portrayal of geographic information in a form understandable by humans. (IT-004)
104pp
Adopts ISO 19118:2005 which specifies the requirements for defining encoding rules to be used for interchange of geographic data within the ISO 19100 series of International Standards. (IT-004)
AS ISO 18876 Industrial automation systems and integrationIntegration of industrial data for exchange, access and sharing AS ISO 18876.12004 Architecture overview and description (ISO/TS 18876-1:2003) 21pp
Adopts ISO 18876-1 which provides and establishes an architecture, a methodology, and other specifications for integrating industrial data for exchange, access, and sharing. (IT-006)
67pp
AS/NZS ISO 19109:2006 Geographic informationRules for application schema (ISO 19109:2005) 71pp
Adopts ISO 19109:2005 which defines rules for creating and documenting application schemas, including principles for the definition of features. (IT-004)
Adopts ISO 19119:2005 which presents a geographic services taxonomy and a list of example geographic services placed in the services taxonomy. (IT-004)
AS/NZS ISO 19110:2006 Geographic informationMethodology for feature cataloguing (ISO 19110:2005) 55pp
Adopts ISO 19110:2005 which specifies how the classification of feature types is organized into a feature catalogue and presented to the users of a set of geographic data. (IT-004)
AS/NZS ISO 19121:2006 Geographic informationImagery and gridded data (ISO/TR 19121:2000) 35pp
Adopts ISO/TR19121:2000 which reviews the manner in which raster and gridded data is currently being handled in the Geomatics community in order to propose how this type of data should be supported by geographic information standards. (IT-004)
AS/NZS ISO 19111:2008 Geographic informationSpatial referencing by coordinates (ISO 19111:2007) 78pp
231
AS/NZS ISO 19136:2008 Geographic informationGeography Markup Language (GML) (ISO 19136:2007) 394pp
Adopts ISO 19136:2007 to provide a Geography Markup Language (GML) Standard with XML encoding in compliance with ISO 19118 for the transport and storage of geographic information modelled in accordance with the conceptual modelling framework used in the ISO 19100 series of Standards. (IT-004)
AS/NZS ISO/IEC 19761:2008 Software engineeringCOSMIC-FFPA functional size measurement method (ISO/IEC 19761:2003) 17pp
Adopts ISO/IEC 19761:2003 to specify the set of definitions, conventions and activities of the COSMIC-FFP Functional Size Measurement Method. It is applicable to application software and real-time software, and their hybrids. (IT-015)
AS/NZS ISO 19123:2006 Geographic informationSchema for coverage geometry and functions (ISO 19123:2005) 65pp
Adopts ISO 19123:2005 which provides systems users and designers with definitions of conceptual schema for the spatial characteristics of coverages. (IT-004)
AS/NZS ISO 19137:2008 Geographic informationCore profile of the spatial schema (ISO 19137:2007) 13pp
Adopts ISO 19137:2007 to define a core profile of the spatial schema specified in ISO 19107 that specified in accordance with ISO 19106, a minimal set of geometric elements necessary for the efficient creation of application schemata. (IT-004)
AS ISO/IEC 19762 Information technologyAutomatic identification and data capture (AIDC) techniques Harmonized vocabulary AS ISO/IEC 19762.12006 General terms relating to AIDC (ISO/IEC 19762-1:2005)
AS/NZS ISO 19125 Geographic informationSimple feature access AS/NZS ISO 19125.1:2004 Common architecture (ISO 19125-1:2004)
20pp
42pp
Adopts ISO 19125-1:2004 which specifies a common architecture and defines terms to use within the architecture. (IT-004)
AS/NZS ISO 19138:2008 Geographic informationData quality measures (ISO/TS 19138:2006) 68pp
Adopts ISO/TS 19138:2007 to define a set of data quality measures. This can be used when reporting data quality for the data quality sub-elements identified in ISO 19113. (IT-004)
Adopts ISO/IEC 19762-1:2006 to provide general terms and definitions in the area of automatic identification and data capture techniques on which are based further specialized sections in various technical fields, as well as the essential terms which should be used by non-specialist users in communication with specialists in automatic identification and data capture techniques. (IT-034)
61pp
Adopts ISO 19125-2:2004 which specifies an SQL schema that supports storage, retrieval, query and update of simple geospatial feature collections via the SQL Call Level Interface (SQL/CLI) (ISO/IEC 90753:1999). (IT-004)
AS/NZS ISO 19139:2008 Geographic informationMetadataXML schema implementation (ISO/TS 19139:2007) 111pp
Adopts ISO/TS 19139:2007 to define Geographic MetaData XML (gmd) encoding, an XML schema implementation derived from ISO 19115. (IT-004)
24pp
Adopts ISO/IEC 19762-2:2006 to provide terms and definitions unique to optically readable media (ORM) in the field of automatic identification and data capture techniques. (IT-034)
AS/NZS ISO 19127:2006 Geographic informationGeodetic codes and parameters (ISO/TS 19127:2005) 20pp
Adopts ISO/TS19127:2005 which defines rules for the population and maintenance of registers of geodetic codes and parameters and identifies the data elements. (IT-004)
AS ISO 193182006 Surface chemical analysisX-ray photoelectron spectroscopyReporting of methods used for charge control and charge correction (ISO 19318:2004) 11pp
Adopts ISO 19318:2004 to specify the minimum amount of information describing the methods of charge control and charge correction in measurements of core-level binding energies for insulating specimens by X-ray photoelectron spectroscopy that shall be reported with the analytical result. (CH-016)
AS/NZS ISO 19128:2006 Geographic informationWeb map server interface (ISO 19128:2005) 76pp
Adopts ISO 19128:2005 which provides systems users and designers with the specifics of the behaviour of a service that produces spatially referenced maps dynamically from geographic information. It specifies operations to retrieve a description of the maps offered by a server, to retrieve a map, and to query a server about features displayed on a map. (IT-004)
AS/NZS ISO/IEC 19770 Information technologySoftware asset management AS/NZS ISO/IEC 19770.1:2007 Processes (ISO/IEC 19770-1:2006)
AS/NZS ISO 19131:2008 Geographic informationData product specifications (ISO 19131:2007) 40pp
Adopts ISO 19131:2007 to specify requirements for geographic data products, based upon the concepts of other ISO 19100 Standards. (IT-004)
AS ISO 193192006 Surface chemical analysisAugur electron spectroscopy and X-ray photoelectron spectroscopyDetermination of lateral resolution, analysis area and sample area viewed by the analyser (ISO/TR 19319:2003) 17pp
Adopts ISO 19319:2003 to provide information for measuring lateral analysis, the analysis area and the sample area viewed by the analyser in Auger electron spectroscopy and X-ray photoelectron spectroscopy. (CH-016)
25pp
Adopts ISO/IEC 19770-1:2006 to provide a baseline for an integrated set of processes for Software Asset Management (SAM). The Standard enables an organization to prove that it is performing Software Assets Management (SAM) to a Standard sufficient to satisfy corporate governance requirements and ensure effective support for IT service management overall. (IT-015)
AS ISO/IEC 19784 Information technologyBiometric application programming interface AS ISO/IEC 19784.12007 BioAPI specification (ISO/IEC 19784-1:2006)
AS/NZS ISO 19133:2006 Geographic informationLocation-based servicesTracking and navigation (ISO 19133:2005) 139pp
Adopts ISO 19133:2005 which provides users and designers with a description of the data types, and operations associated with those types, for the implementation of tracking and navigation services. (IT-004)
AS/NZS ISO/IEC 19500 Information technologyOpen Distributed Processing AS/NZS ISO/IEC 19500.2:2007 General Inter-ORB Protocol (GIOP)/Internet Inter-ORB Protocol (IIOP) (ISO/IEC 19500-2:2003) 96pp
Provides a specification of General Inter-ORB Protocol (GIOP) for object request broker (ORB) Interoperability. (IT-015)
167pp
Adopts ISO/IEC 19784-1:2006 to provide a high-level generic biometric authentication model suited for most forms of biometric technology. (IT-032)
AS ISO/IEC 19785 Information technologyCommon Biometric Exchange Formats Framework AS ISO/IEC 19785.12007 Data element specification (ISO/IEC 19785-1:2006)
AS/NZS ISO 19134:2008 Geographic informationLocation-based servicesMultimodal routing and navigation (ISO 19134:2007) 38pp
Adopts ISO 19134:2007 to specify the data types and their associated operations for the implementation of multimodal location-based services for routing and navigation. (IT-004)
AS/NZS ISO/IEC 19759:2007 Software EngineeringGuide to the Software Engineering Body of Knowledge (SWEBOK) (ISO/IEC TR 19759:2005) 202pp
Adopts ISO/IEC TR 19759:2005 to provide a guide to the software engineering discipline and topical access to the literature supporting that discipline. (IT-015)
28pp
Adopts ISO/IEC 19785-1:2006 interoperability of biometric-based applications and systems by specifying standard structure for biometric information records (BIRS). (IT-032)
AS/NZS ISO 19135:2006 Geographic informationProcedures for item registration (ISO 19135:2005) 57pp
Adopts ISO 19135:2005 which provides users and designers with the procedures to be followed in establishing, maintaining and publishing registers of unique, unambiguous and permanent identifiers and meanings that are assigned to items of geographic information. (IT-004)
AS/NZS ISO/IEC 19760:2007 Software engineeringA guide for the application of AS/NZS ISO/IEC 15288 (System life cycle processes) (ISO/IEC TR 19760:2003) 75pp
Adopts ISO/IEC TR 19760:2003 to provide guidance on the application of AS/NZS ISO/IEC 15288, System Life Cycle Processes. (IT-015)
AS ISO/IEC 19785.22007 Procedure for the operation of the Biometric Registration Authority (ISO/IEC 19785-2:2006) 15pp
Adopts ISO/IEC 19785-2:2006 to specify the procedures to be followed by the Biometrics Registration Authority in preparing, maintaining and publishing register of identifier for biometric organisations. (IT-032)
232
AS ISO 202522007 Market, opinion and social research Vocabulary and service requirements (ISO 20252:2006, MOD)
228pp
Establishes the terms and definitions as well as the service requirements for organizations and professionals conducting market, opinion and social research (MB-005)
Adopts ISO/IEC 21000-6:2004 which describes a Rights Data Dictionary which comprises a set of clear, consistent, structured, integrated and uniquely identified Terms to support the MPEG-21 Rights Expression Language. (IT-029)
AS/NZS ISO/IEC 20926:2008 Software engineeringIFPUG 4.1 Unadjusted functional size measurement method Counting practices manual (ISO/IEC 20926:2003) 346pp
Adopts ISO/IEC 20926:2003 to specify the International Function Point Users Group (IFPUG) Release 4.1 unadjusted Functional Size Measurement Method. (IT-015)
355pp
AS ISO/IEC 19794 Information technologyBiometric data interchange formats AS ISO/IEC 19794.12007 Framework (ISO/IEC 19794-1:2006)
Adopts ISO/IEC 21000-7:2004 which provides multimedia designers with tools for adaptation of digital items and set constraints on transmission, consumption and storage. (IT-029)
15pp
AS ISO/IEC 20943 Information technologyProcedures for achieving metadata registry content consistency AS ISO/IEC 20943.12005 Data elements (ISO/IEC TR 20943-1:2003)
59pp
Adopts ISO/IEC 19794-1:2006 to describe the general aspects and requirements for defining biometric data interchange formats. (IT-032)
125pp
40pp
Adopts ISO/IEC TR 20943-1:2003 which specifies a set of procedures for the consistent registration of data elements and their attributes in a registry. (IT-027)
Adopts ISO/IEC 21000-8:2006 which describes reference software implementing the normative clauses of the other parts of ISO/IEC 21000. The information provided is applicable for determining the reference software modules available for parts of ISO/IEC 21000, understanding the functionality of the available reference software modules and utilizing the available reference software modules. (IT-029)
Adopts ISO/IEC 19794-2:2006 to specify a concept and data formats for the representation of fingerprints using the fundamental notion of minutiae (IT-032)
6pp
42pp
Adopts ISO/IEC 20943-3:2003 which specifies a set of procedures for the consistent registration of data elements and their attributes in a registry. (IT-027)
Adopts ISO/IEC 21000-9:2005 which specifies the MPEG-21 file format, in which an MPEG-21 XML document (e.g. Digital Item Declaration (DID)) and some or all of its referenced content can be placed in single content package file. (IT-029)
Adopts ISO/IEC 19794-3:2006 to specify the interchange format for the exchange of spectral-based fingerprint data. (IT-032)
AS/NZS ISO/IEC 20968:2004 Software engineeringMk II Function Point AnalysisCounting Practices Manual (ISO/IEC 20968:2002) 93pp
Adopts ISO/IEC 20968 which defines Mk II FPA function point analysis. It provides a methodology for the quantitative analysis and measurement of information processing applications. (IT-015)
121pp
21pp
Adopts ISO/IEC 19794-4:2005 to specify the recording format and associated parameters relevant to biometric finger image data. (IT-032)
Proposes the adoption of ISO/IEC 21000-10:2006 which specifies the syntax and semantics of tools that may be used to process Digital Items. The tools provide a normative set of tools that specify the processing of a Digital Item in a predefined manner. (IT-029)
AS ISO/IEC 21000 Information technologyMultimedia framework (MPEG-21) AS ISO/IEC 21000.22006 Digital Item Declaration (ISO/IEC 21000-2:2005)
45pp
47pp
Adopts ISO/IEC 19794-5:2005 to specify the recording format and associated parameters relevant to biometric facial images. (IT-032)
88pp
Provides the Australian multimedia industry with tools to specify how Event Reports and Event Report Requests are expressed and used in an ISO/IEC 21000 MPEG-21 environment. (IT-029)
Adopts ISO/IEC21000-2:2005 which specifies the mechanism for declaring the structure and makeup of Digital Items for MPEG-21. (IT-029)
25pp
5pp
Adopts ISO/IEC 19794-6:2005 to specify two alternative image interface format for biometric authentication system that utilize iris recognition. (IT-032)
30pp
AS ISO/IEC 19795 Information technologyBiometric performance testing and reporting AS ISO/IEC 19795.12007 Principles and framework (ISO/IEC 19751-1:2006)
56pp
Adopts ISO/IEC 21000-3:2003 which defines an open framework for multimedia delivery and consumption to enable transparent and augmented use of multimedia resources across a wide range of networks and devices used by different communities by defining a uniform and flexible abstraction and interoperable schema for identifying the structure and makeup of Digital Items. (IT-029)
Proposes the adoption of ISO/IEC 21000-16:2005 which specifies the ISO/IEC 21000 binary format which is an alternative serialization format of descriptions as specified within other ISO/IEC 21000 parts, e.g. ISO/IEC 21000-2. This enables the efficient interchange or storage of ISO/IEC 21000 descriptions. (IT-029)
AS ISO 22000 Set2006 Food Safety Management Set AS ISO 220002005 Food safety management systems Requirements for any organization in the food chain (ISO 22000:2005) 32pp
Adopts ISO22000:2005 to specify requirements for a food safety management system in the food chain where an organization needs to demonstrate its ability to control food safety hazards in order to ensure safe products. (FT-024)
Adopts ISO/IEC 19751-1:2006 to specify the general principles applicable to the testing of biometric systems. (IT-032)
AS ISO/IEC 21000.42006 Intellectual Property Management and Protection Components (ISO/IEC 21000-4:2006) 70pp
Adopts ISO/IEC 21000-4:2006 which specifies how to include IPMP information and protected parts of Digital Items in a DIDL document. It purposely does not specify protection measures, keys, key management, trust management, encryption algorithms, certification infrastructures or other components that would also be needed as part of a complete IPMP solution. (IT-029)
52pp
AS ISO/IEC 20000 Information technologyService management AS ISO/IEC 20000.12007 Specification (ISO/IEC 20000-1:2005)
17pp
Adopts ISO/IEC 20000-1:2005 to provide requirements for a service provider to deliver managed services of an acceptable level for its customers. (IT-030)
AS ISO 22004(Int)2006 Food safety management systemsGuidance on the application of AS ISO 220002005 (ISO 22000:2005) 13pp (Expired 6 June 2008)
Adopts ISO/TS 22004:2005 to provide generic guidance that can be applied in the use of AS ISO 22000. (FT-024)
121pp
35pp
Adopts ISO/IEC 20000-2:2005 to represent an industry consensus on quality standards for IT service management processes. (IT-030)
Adopts ISO/IEC 21000-5:2004 which defines an authorization model to specify whether the semantics of a set of Rights Expression permit a given Principal to perform a given Right upon a given optional Resource during a given time interval based on a given authorization context and a given trust root. (IT-029)
AS ISO 220482006 Surface chemical analysisInformation format for static secondary-ion mass spectrometry (ISO 22048:2004) 10pp
Adopts ISO 22048:2004 to specify a digital format to store and transfer between computers, in a compact way, important calibration and instrumental-parameter data necessary
233
AS ISO 220932004
to make effective use of spectral-data files from static SIMS instruments. (CH-016)
AS ISO 220932004 Industrial automation systems and integrationPhysical device controlDimensional Measuring Interface Standard (DMIS) (ISO 22093:2003) 591pp
Adopts ISO 22093 which provides a standard for the bidirectional communication of inspection data between computer systems and inspection equipment. The Dimensional Measuring Interface Standard (DMIS) is a vocabulary of terms, which establishes a neutral format for inspection programs and inspection results data. (IT-006)
AS/NZS 23950:1999 Information and documentationInformation retrieval (Z30.50)Application service definition and protocol specification (ISO 23950:1998) 154pp
Defines the Information Retrieval Application Service and specifies the Information Retrieval Application Protocol. The service definition describes services that support capabilities within an aplication; the services in turn are supported by the Z39.50 protocol. The protocol specification includes the definition of the protocol information, the rules for exchanging this information, and the conformance requirements to be met by implementation of this protocol. It is intended for systems supporting information retrieval services and for organizations such as information services, universities, libraries and union catalogue centres. This Standard addresses the connection-oriented, program-toprogram communications. It does not address interchange of the information with terminals or via other physical means. This Standard is identical with and has been reproduced from ISO 23950:1998 (IT-019)
AS/NZS ISO/IEC 25062:2006 Software engineeringSoftware product Quality Requirements and Evaluation (SQuaRE) Common Industry Format (CIF) for usability test reports (ISO/IEC 25062:2006) 46pp
Adopts ISO/IEC 25062:2006 to provide software usability guidelines to help predict successful deployment of software. (IT-015)
AS ISO 25539 Cardiovascular implantsEndovascular devices AS ISO 25539.12003 Endovascular prostheses (ISO 25539-1:2003)
AS ISO 223102006 Information and documentationGuidelines for standards drafters for stating records management requirements in standards (ISO 22310:2006) 5pp
Adopts ISO 22310:2006 which provides guidance as an addition to the procedures for technical work and the methodology for the development of International Standards established by the ISO/IEC Directives. This guideline also assists those who involved in writing of documentation and records management requirements in standards. (IT-021)
42pp
AS/NZS ISO 22608:2007 Protective clothingProtection against liquid chemicalsMeasurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials (ISO 22608:2004) 11pp
(SF-004)
AS ISO 242372006 Surface chemical analysisX-ray photoelectron spectroscopyRepeatability and constancy of intensity scale (ISO 24237:2005) 12pp
Adopts ISO 24237:2005 to specify a method for evaluating the repeatability and constancy of the intensity scale of Xray photoelectron spectrometres for general purposes using unmonochromated Al or Mg X-rays or monochromated Al X-rays. (CH-016)
Specifies requirements for endovascular prostheses, based upon current medical knowledge. With regard to safety, it gives requirements for intended performance, design attributes, materials, design evaluation, manufacturing, sterilization packaging and information supplied by the manufacturer. It should be considered as a supplement to AS ISO 14630, which specifies general requirements for the performance of non-active surgical implants. It is applicable to endovascular prostheses used to treat arterial aneurysms, arterial stenoses, or other appropriate vascular abnormalities. (HE-012)
AS/NZS ISO/IEC 27001 Set:2006 Information technologyBasic Set AS/NZS ISO/IEC 27001:2006 Information technologySecurity techniques Information security management systems Requirements (ISO/IEC 27001:2005) 34pp
Adopts ISO/IEC 27001:2005 to provide a model for establishing, implementing, operating, monitoring, reviewing, maintaining and improving an Information Security Management System (ISMIS). This Standard can be used in order to assess conformance by interested internal or external parties. (IT-012)
AS ISO/IEC 23001 Information technologyMPEG systems technologies AS ISO/IEC 23001.12006 Binary MPEG format for XML (ISO/IEC 23001-1:2006)
AS ISO 245372007 MicrographicsDimensions for reels used for 16 mm and 35 mm microfilm (ISO 24537:2007) 5pp
Covers the essential dimensions of lightweight reels, made of plastic or metal, used for the storage and retrieval of processed 16 mm and 35 mm microfilm that is used in manually threaded equipment. (IT-021)
133pp
Adopts ISO/IEC 23001-1:2006 which provides a standardized set of technologies for encoding XML documents. It addresses a broad spectrum of applications and requirements by providing a generic method for transmitting and compressing XML documents. (IT-029)
AS/NZS ISO/IEC 24570:2007 Software engineeringNESMA functional size measurement method version 2.1Definitions and counting guidelines for the application of Function Point Analysis (ISO/IEC 24570:2005) 124pp
Adopts ISO/IEC 24570:2005 to specify a method to measure the functional size of software, provide guidelines to determine the components of the functional size of software, the calculation of size as a result of the method and guidelines for the application of the method. (IT-015)
AS ISO/IEC 23002 Information technologyMPEG video technologies AS ISO/IEC 23002.12008 Accuracy requirements for implementation of integer-output 8 x 8 inverse discrete cosine transform (ISO/IEC 23002-1:2006) 11pp
Provides the Australian Multimedia industry with conformance requirements for establishing sufficient accuracy in an integer-output IDCT implementation. (IT-029)
AS/NZS ISO/IEC 27002:2006 Information technologySecurity techniques Code of practice for information security management (ISO/IEC 27002:2005) 116pp
Provides a practical guideline for developing organizational security, standards and effective security management practices and to help build confidence in inter-organisational activities. (IT-012)
AS EN 45502 Active implantable medical devices AS EN 45502.12002 General requirements for safety, marking and information to be provided by the manufacturer (EN 45502-1:1997) 47pp
Specifies requirements for active implantable medical devices for safety, marking and information to be provided by manufacturer. (HE-012)
AS/NZS ISO/IEC 23026:2006 Software engineeringRecommended Practice for the InternetWeb Site Engineering, Web Site Management, and Web Site Life Cycle (ISO/IEC 23026:2006) 72pp
Adopts ISO/IEC 23026:2006 to provide recommended practices for world wide web page engineering for Intranet and Extranet environments. (IT-015)
AS/NZS ISO/IEC 25000:2007 Software engineeringSoftware product Quality Requirements and Evaluation (SQuaRE) Guide to SQuaRE (ISO/IEC 25000:2005) 41pp
Adopts ISO/IEC 25000:2005 to provide guidance on Software Product Quality Requirements and Evaluation (SQuaRE). Overview; common reference models and definitions, as well as relationship among the documents. (IT-015)
AS EN 460032002 Quality systemsMedical devicesParticular requirements for the application of ISO 9003 (EN 46003:1999) 7pp
Specifies, for suppliers of medical devices, quality systems requirements that are more specific than those given in ISO 9003. (QR-008)
AS ISO 23081 Information and documentationRecords management processesMetadata for records AS ISO 23081.12006 Principles (ISO 23081-1:2006)
20pp
Adopts ISO 23081-1:2006 which specifies the principles that underpin and govern records management metadata. (IT-021)
AS/NZS ISO/IEC 25051:2007 Software engineeringSoftware product Quality Requirements and Evaluation (SQuaRE) Requirements for quality of Commercial OffThe-Shelf (COTS) software product and instructions for testing (ISO/IEC 25051:2006) 27pp
Adopts ISO/IEC 25051:2006 to provide a guide for Commercial Off-The-Shelf (COTS) software products quality guide; requirements for test; and instructions for conformity. (IT-015)
AS EN 500522008 Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear (EN 50052:1986, EN 50052:1986 AMD1:1991, EN 50052:1986 AMD2:1994) 24pp
Specifies the requirements for cast aluminium enclosures that are to be used in high-voltage switchgear and controlgear and associated gas-filled equipment. (EL-007)
AS/NZS ISO 23081.2:2007 Conceptual and implementation issues (ISO/TS 23081-2:2007) 34pp
Establishes a framework for defining metadata elements consistent with the principles and implementation considerations. (IT-021)
AS EN 500642008 Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear (EN 50064:1989, EN 50064:1989 AMD1:1994) 76pp
Specifies the requirements for wrought aluminium and aluminium alloy enclosures for use in high-voltage switch-
234
AS 60068 Environmental testing AS 60068.12003 General and guidance (IEC 60068-1 Ed. 6.0 (Bilingual 1988), IEC 60068-1 Amd.1 Ed. 6.0 (Bilingual 1992)) 18pp
Includes a series of methods of environmental test and their appropriate severities, and prescribes various atmospheric conditions for measurements and tests designed to assess the ability of specimens to perform under expected conditions of transportation, storage and all aspects of operational use. (EL-026)
AS EN 501032002 Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry. (EN 50103:1995) 16pp
Provides guidance on concepts and objectives to be considered by a supplier of active medical devices when developing and maintaining a quality system. (HE-012)
AS 60068.2.102003 TestsTest J and guidance: Mould growth (IEC 60068-2-10 Ed. 5.0 (Bilingual 1988)) 21pp
Covers the inoculation of assembled specimens with a selection of mould spores followed by a period of incubation under conditions which promote spore germination and the growth of mould. (EL-026)
AS 600382000 Standard voltages (IEC 60038 Ed. 6.0 (Bilingual 1983), IEC 60038 Amd.1 Ed. 6.0 (Bilingual 1994), IEC 60038 Amd.2 Ed. 6.0 (Bilingual 1997)) 8pp
Specifies standard voltages for 50 Hz a.c. transmission distribution and utilization systems, standard voltages for a.c. or d.c. traction systems and nominal voltages for a.c. and d.c. equipment less than 120 V a.c. or 750 V d.c. This Standard is based on and contains the full text of IEC 60038:1983 incorporating its Amd. 1:1994 and Amd. 2:1997. Text not applicable in Australia has been struck through for clarity. Added text for Australian conditions has been shaded and inserted in its appropriate place. An appendix summarizes variations for Australian conditions. (EL-034)
AS 60068.2.112003 TestsTest Ka: Salt mist (IEC 60068-2-11 Ed. 3.0 (Bilingual 1981)) 4pp
Defines a test to compare the resistance to deterioration from salt mist of specimens of similar construction. It is useful for evaluating the quality and the uniformity of protective coatings. (EL-026)
AS 60068.2.12003 TestsTest A: Cold (IEC 60068-2-1 Ed. 5.0 (Bilingual 1990), IEC 60068-2-1 Amd.1 Ed. 5.0 (Bilingual 1993), IEC 60068-2-1 Amd.2 Ed. 5.0 (Bilingual 1994)) 23pp
Deals with cold tests applicable both to non heatdissipating and heat-dissipating specimens. For non heat-dissipating specimens, Tests Aa and Ab do not deviate essentially from earlier issues. (EL-026)
AS 60068.2.132003 TestsTest M: Low air pressure (IEC 60068-2-13 Ed. 4.0 (Bilingual 1983)) 3pp
Determines the ability of components, equipment or other articles to be stored, transported or used under low air pressure conditions. (EL-026)
AS 60044 Instrument transformers AS 60044.12007 Current transformers (IEC 60044-1 Ed.1.2 (2003) MOD) 50pp
Specifies requirements and tests for current transformers. (EL-013)
AS 60068.2.22003 TestsTest B: Dry heat (IEC 60068-2-2 Ed. 4.0 (Bilingual 1974), IEC 60068-2-2 Amd.1 Ed. 4.0 (Bilingual 1993), IEC 60068-2-2 Amd.2 Ed. 4.0 (Bilingual 1994)) 33pp
Provides a standard test procedure to determine the suitability of non heat-dissipating components, equipment or other articles for use and/or storage under conditions of high temperature and for which the subjection to a sudden change of temperature has no detrimental effect. (EL-026)
AS 60068.2.142003 TestsTest N: Change of temperature (IEC 60068-2-14 Ed. 5.0 (Bilingual 1984), IEC 60068-2-14 Amd.1 Ed. 5.0 (Bilingual 1986)) 10pp
Determines the ability of components, equipment or other articles to withstand rapid changes of ambient temperature. (EL-026)
AS 60068.2.172003 TestsTest Q: Sealing (IEC 60068-2-17 Ed. 4.0 (Bilingual 1994)) 39pp
Indicates the interrelation between the various tests for sealing in Test Q of IEC 60068. (EL-026)
AS 60068.2.52003 TestsTest Sa: Simulated solar radiation at ground level (IEC 60068-2-5 Ed. 1.0 (Bilingual 1975)) 4pp
Determines the effects (thermal, mechanical, chemical, electrical, etc.), produced on equipment and components as a result of exposure to solar radiation under the conditions experienced at the surface of the earth. (EL-026)
AS 60068.2.182003 TestsTest R and guidance: Water (IEC 60068-2-18 Ed. 2.0 (Bilingual 2000)) 32pp
Provides methods of test applicable to products which, during transportation, storage or in service, may be subjected to falling drops, impacting water or immersion. (EL-026)
AS 60044.32004 Combined transformers (IEC 60044-3 Ed. 2.0 (Bilingual 2002)) 14pp
Provides requirements and tests for combined voltage and current transformers. (EL-013)
AS 60044.52004 Capacitor voltage transformers (IEC/PAS 60044-5 Ed. 1.0 (English 2002)) 62pp
A partial revision of AS 12431982 by means of adoption of IEC/PAS 60044-5:2002 to specify requirements and tests for capacitor voltage transformers. (EL-013)
AS 60068.2.62003 TestsTest Fc: Vibration (sinusoidal) (IEC 60068-2-6 Ed. 6.0 (Bilingual 1995), IEC 60068-2-6 Ed. 6.0 Cor.1 (Bilingual 1995)) 32pp
Provides a standard procedure to determine the ability of components, equipment and other articles, hereinafter referred to as specimens, to withstand specified severities of sinusoidal vibration. Determines any mechanical weakness and/or degradation in the specified performance of specimens and to use this information, in conjunction with the relevant specification, to decide the acceptability of the specimens. (EL-026)
AS 60068.2.202004 TestsTest T: Soldering (IEC 60068-2-20 Ed. 4.0 (Bilingual 1979), IEC 60068-2-20 Amd.2 Ed. 4.0 (Bilingual 1987)) 22pp
Part of a suite of Standards that adopt the IEC60068 series of Standards as Australian Standards. The series contains fundamental information on environmental testing procedures and severities of tests, including information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of the environmental testing procedures are equally applicable to other industrial products. (EL-026)
AS 600522005 Voltage measurement by means of standard air gaps (IEC 60052 Ed. 3.0 (Bilingual 2002)) 23pp
Specifies recommendations for the construction and use of standard air gaps for the measurement of peak values of voltage. (EL-007)
AS 60068.2.72003 TestsTest Ga and guidance: Acceleration, steady state (IEC 60068-2-7 Ed. 2.0 (Bilingual 1983), IEC 60068-2-7 Amd.1 Ed. 2.0 (Bilingual 1986)) 7pp
To prove the structural suitability and the satisfactory performance of components, equipment and other electrotechnical products, hereinafter referred to as "specimens", when subjected to forces produced by steady acceleration environments (other than gravity) such as occur in moving vehicles, especially flying vehicles, rotating parts and projectiles, and to provide a test of structural integrity for certain components. (EL-026)
AS 60068.2.212004 TestsTest U: Robustness of terminations and integral mounting devices (IEC 60068-2-21 Ed. 5.0 (Bilingual 1999)) 22pp
The AS60068 Standards include a series of environmental testing procedures, information on the severity of tests, and information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of the procedures are equally applicable to other industrial products. (EL-026)
AS 60060 High-voltage test techniques AS 60060.32008 Definitions and requirements for on-site testing (IEC 60060-3 Ed. 1.0 (English 2006)) 27pp
Proposes requirements for on-site high-voltage tests with direct voltage, alternating voltage, lightning impulse voltage and switching impulse voltage on equipment with highest voltage greater than 1 kV. (EL-007)
AS/NZS 60065:2003 Audio.video and similar electronic apparatus Safety requirements (IEC 60065:2001, MOD) 147pp
Amendment 1 31 January 2008 Specifies electrical safety requirements for apparatus intended for the reception, generation, recording or reproduction of audio, video or associated signals. (TE-001)
AS 60068.2.92003 TestsGuidance for solar radiation testing (IEC 60068-2-9 Ed. 1.0 (Bilingual 1975), IEC 60068-2-9 Amd.1 Ed. 1.0 (Bilingual 1984)) 18pp
Describes methods of simulation designed to examine the effect of solar radiation on equipment and components at the surface of the earth. (EL-026)
AS 60068.2.272003 TestsTest Ea and guidance: Shock (IEC 60068-2-27 Ed. 3.0 (Bilingual 1987)) 25pp
Provides a standard procedure for determining the ability of a specimen to withstand specified severities of shock. (EL-026)
AS 60068.2.292003 TestsTest Eb and guidance: Bump (IEC 60068-2-29 Ed. 2.0 (Bilingual 1987)) 12pp
Provides a standard procedure for determining the ability of a specimen to withstand specified severities of bump. (EL-026)
235
AS 60068.2.302003
AS 60068.2.302003 TestsTest Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) (IEC 60068-2-30 Ed. 2.0 (Bilingual 1980), IEC 60068-2-30 Amd.1 Ed. 2.0 (Bilingual 1985)) 10pp
Determines the suitability of components, equipment or other articles for use and storage under conditions of high humidity when combined with cyclic temperature changes and, in general, producing condensation on the surface of the specimen. (EL-026)
AS 60068.2.422004 TestsTest Kc: Sulphur dioxide test for contacts and connections (IEC 60068-2-42 Ed. 3.0 (Bilingual 2003)) 5pp
The AS60068 series of Standards includes a series of environmental testing procedures, information on the severity of tests and information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of the procedures are equally applicable to other industrial products. (EL-026)
AS 60068.2.492004 TestsGuidance to Test Kc: Sulphur dioxide test for contacts and connections (IEC 60068-2-49 Ed. 1.0 (Bilingual 1983)) 6pp
The AS60068 series of Standards includes a series of environmental testing procedures, information on the severity of tests and information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of the procedures are equally applicable to other industrial products. (EL-026)
AS 60068.2.312003 TestsTest Ec: Drop and topple, primarily for equiment-type specimens (IEC 60068-2-31 Ed. 1.0 (Bilingual 1969), IEC 60068-2-31 Amd.1 Ed. 1.0 (Bilingual 1982)) 4pp
To assess the effects upon a specimen of simple standard tests intended to be representative of the knocks and jolts likely to occur during repair work or rough handling in use on a table or bench. (EL-026)
AS 60068.2.432004 TestsTest Kd: Hydrogen sulphide test for contacts and connections (IEC 60068-2-43 Ed. 2.0 (Bilingual 2003)) 6pp
Part of a suite of Standards that adopt the IEC 60068 series of Standards as Australian Standards. The series contains fundamental information on environmental testing procedures and severities of tests, including information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of the environmental testing procedures are equally applicable to other industrial products. (EL-026)
AS 60068.2.502003 TestsTest Z/Afc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (IEC 60068-2-50 Ed. 1.0 (Bilingual 1983)) 8pp
Provides a standard test procedure to determine the suitability of heat-dissipating and non-heat-dissipating components, equipment or other articles for use, storage and transportation under conditions of low temperature combined with vibration. (EL-026)
AS 60068.2.322003 TestsTest Ed: Free fall (IEC 60068-2-32 Ed. 2.0 (Bilingual 1975), IEC 60068-2-32 Amd.2 Ed. 2.0 (Bilingual 1990), IEC 60068-2-32 Amd.1 Ed. 2.0 b (1982)) 8pp
To assess the effects on a specimen of simple standard tests intended to be representative of the fall likely to be experienced during rough handling, or to demonstrate a minimum degree of robustness, for the purpose of assessing safety requirements. (EL-026)
AS 60068.2.442004 TestsGuidance on test T: Soldering (IEC 60068-2-44 Ed. 2.0 (Bilingual 1995), IEC 60068-2-44 Ed. 2.0 Cor.1 (Bilingual 1995)) 18pp
Part of a suite of Standards that adopt the IEC60068 series of Standards as Australian Standards. The series contains fundamental information on environmental testing procedures and severities of tests, including information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of the environmental testing procedures are equally applicable to other industrial products. (EL-026)
AS 60068.2.512003 TestsTest Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (IEC 60068-2-51 Ed. 1.0 (Bilingual 1983)) 8pp
Provides a standard test procedure to determine the suitability of heat-dissipating and non-heat-dissipating components, equipment or other articles for use, storage and transportation under conditions of high temperature combined with vibration. (EL-026)
AS 60068.2.332003 TestsGuidance on change of temperature tests (IEC 60068-2-33 Ed. 1.0 (Bilingual 1971), IEC 60068-2-33 Amd.1 Ed. 1.0 (Bilingual 1978)) 6pp
Provides guidance to designers and testing personnel on the specification and use of change of temperature tests. (EL-026)
AS 60068.2.382003 TestsTest Z/AD: Composite temperature/humidity cyclic test (IEC 60068-2-38 Ed. 1.0 (Bilingual 1974)) 9pp
Provides a composite test procedure, primarily intended for component type specimen, to determine in an accelerated manner the resistance of specimens to the deteriorative effects of high temperature/humidity and cold conditions. (EL-026)
AS 60068.2.452003 TestsTest XA and guidance: Immersion in cleaning solvents (IEC 60068-2-45 Ed. 1.0 (Bilingual 1980)) 7pp
Describes a test procedure whereby specimens to be tested are immersed in a certain solvent at a specified temperature and for a specified time. If required by the relevant specification, after immersion and drying, specimens shall be rubbed with cotton wool or wrapping tissue paper. Guidance on the test is given in the annex. (EL-026)
AS 60068.2.522003 TestsTest Kb: Salt mist, cyclic (sodium chloride solution) (IEC 60068-2-52 Ed. 2.0 (Bilingual 1996)) 7pp
Describes the test for application to components or equipment designed to withstand a salt-laden atmosphere, depending on the chosen severity. Salt can degrade the performance of parts manufactured using metallic and/or non-metallic materials. (EL-026)
AS 60068.2.392003 TestsTest Z/AMD: Combined sequential cold, low air pressure and damp heat test (IEC 60068-2-39 Ed. 1.0 (Bilingual 1976)) 3pp
Provides a standard environmental test procedure consisting of the application of cold, low air pressure and damp heat; the first two conditions in combination and the second condition combining with the third during the sequential transition from the first. (EL-026)
AS 60068.2.462004 TestsGuidance to test Kd: Hydrogen sulphide test for contacts and connections (IEC 60068-2-46 Ed. 1.0 (Bilingual 1982)) 8pp
The AS60068 Standards include a series of environmental testing procedures, information on the severity of tests, and information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of the procedures are equally applicable to other industrial products. (EL-026)
AS 60068.2.532003 TestsGuidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests (IEC 60068-2-53 Ed. 1.0 (Bilingual 1984)) 3pp
Provides guidance on the application of the combined tests Z/AFc (IEC 60068-2-50) and Z/BFc (IEC 600682-51) to the testing of components, equipment and other electrotechnical products, hereinafter referred to as "specimens". (EL-026)
AS 60068.2.542004 TestsTest Ta: SolderingSolderability testing by the wetting balance method (IEC 60068-2-54 Ed. 1.0 (Bilingual 1985)) 11pp
Part of a suite of Standards that adopt the IEC60068 series of Standards as Australian Standards. The series contains fundamental information on environmental testing procedures and severities of tests, including information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of the environmental testing procedures are equally applicable to other industrial products. (EL-026)
AS 60068.2.402003 TestsTest Z/AM: Combined cold/low air pressure tests (IEC 60068-2-40 Ed. 1.0 (Bilingual 1976)) 7pp
Determines the ability of components or equipment or other articles to be stored and used under a simultaneous combination of low temperature and low air pressure. (EL-026)
AS 60068.2.472003 TestsMounting of compounds, equipment and other articles for vibration, impact and similar dynamic tests (IEC 60068-2-47 Ed. 2.0 (Bilingual 1999)) 14pp
Provides methods of mounting components, and mounting requirements for equipment and other articles, for the families of dynamic tests in IEC 60068-2, that is impact (Test E), vibration (Test F) and acceleration, steady-state (Test G). (EL-026)
AS 60068.2.412003 TestsTest Z/BM: Combined dry heat/low air pressure tests (IEC 60068-2-41 Ed. 1.0 (Bilingual 1976)) 7pp
Determines the ability of components or equipments or other articles to be stored and used under a simultaneous combination of high temperature and low air pressure. (EL-026)
AS 60068.2.552003 TestsTest Ee and guidance: Bounce (IEC 60068-2-55 Ed. 1.0 (Bilingual 1987)) 9pp
Provides a standard procedure for determining the ability of a specimen to withstand specified severities of bounce. (EL-026)
AS 60068.2.482003 TestsGuidance on the application of the tests of AS 60068 to simulate the effects of storage (IEC 60068-2-48 Ed. 1.0 (Bilingual 1982)) 4pp
Describes the keeping of components, equipment or other articles for relatively long periods of time (ranging from some weeks to many years) in a nonoperating mode. (EL-026)
AS 60068.2.572003 TestsTest Ff: VibrationTime-history method (IEC 60068-2-57 Ed. 2.0 (Bilingual 1999)) 25pp
Provides a standard procedure for determining, by the time-history method, the ability of a specimen to withstand specified severities of transient vibration. (EL-026)
236
AS 60068.2.682003 TestsTest L: Dust and sand (IEC 60068-2-68 Ed. 1.0 (Bilingual 1994)) 53pp
Specifies test methods to determine the effects of dust and sand suspended in air, on electrotechnical products. (EL-026)
AS 60068.3.12003 Background informationSection one: Cold and dry heat tests (IEC 60068-3-1 Ed. 1.0 (Bilingual 1974)) 35pp
Describes cold and dry heat testing, with both sudden and gradual change of the temperature, and of nonheat-dissipating and heat-dissipating specimens (the latter with or without artificial cooling). (EL-026)
AS 60068.2.592003 TestsTest Fe: VibrationSine beat method (IEC 60068-2-59 Ed. 1.0 (Bilingual 1990)) 22pp
Provides a standard procedure for determining, by the sine-beat method, the ability of a specimen to withstand specified severities of transient vibration. (EL-026)
AS 60068.2.692004 TestsTest Te: SolderingSolderability testing of electronic components for surface mount technology by the wetting balance method (IEC 60068-2-69 Ed. 1.0 (Bilingual 1995)) 17pp
Part of a suite of Standards that adopt the IEC60068 series of Standards as Australian Standards. The series contains fundamental information on environmental testing procedures and severities of tests, including information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of the environmental testing procedures are equally applicable to other industrial products. (EL-026)
AS 60068.3.1A2003 Background informationSection one: Cold and dry heat testsFirst supplement (IEC 60068-3-1A Ed. 1.0 (Bilingual 1978)) 2pp
Certain equipment is used or stored under high or low temperature conditions only for periods shorter than the time for achieving temperature stability. (EL-026)
AS 60068.2.602003 TestsTest Ke: Flowing mixed gas corrosion test (IEC 60068-2-60 Ed. 2.0 (Bilingual 1995)) 16pp
Determines the corrosive influence of operating and storage indoor environments on electrotechnical products components, equipment and materials, particularly contacts and connections, considered separately, integrated into a subassembly or assembled as a complete equipment. (EL-026)
AS 60068.2.702003 TestsTest Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands (IEC 60068-2-70 Ed. 1.0 (Bilingual 1995)) 5pp
Provides a standard method to determine the resistance of markings and letterings on flat or curved surfaces against abrasion as may occur for example by manually operating actuators and keyboards. (EL-026)
AS 60068.3.22003 Background informationCombined temperature/low air pressure tests (IEC 60068-3-2 Ed. 1.0 (Bilingual 1976)) 4pp
For the combined temperature/low air pressure tests described in this publication, a range of air pressures covering ground or aircraft applications is considered. Air pressures below 10 mbar are outside the scope of these tests. (EL-026)
AS 60068.3.32003 Guidance: Seismic test methods for equipments (IEC 60068-3-3 Ed. 1.0 (Bilingual 1991)) 36pp
Applies primarily to electrotechnical equipments but its application can be extended to other equipments and to components. (EL-026)
AS 60068.2.612003 TestsTest Z/ABDM: Climate sequence (IEC 60068-2-61 Ed. 1.0 (Bilingual 1991)) 12pp
Provides standard composite test methods for determining the suitability of a specimen when subjected to environmental conditions consisting of a sequence of temperature, humidity and, where required, low air pressure environmental stresses. (EL-026)
AS 60068.2.742003 TestsTest Xc: Fluid contamination (IEC 60068-2-74 Ed. 1.0 (Bilingual 1999)) 10pp
Provides a method of test which provides a standard procedure to determine the ability of components, equipments or their constituent materials, hereinafter referred to as specimen, to withstand accidental contact with fluids, without being unacceptably affected. (EL-026)
AS 60068.3.42003 Supporting documentation and guidanceDamp heat tests (IEC 60068-3-4 Ed. 1.0 (Bilingual 2001)) 11pp
Amendment 1 11 June 2004 Provides the necessary information to assist in preparing relevant specifications, such as standards for components or equipment, in order to select appropriate tests and test severities for specific products and, in some cases, specific types of application. (EL-026)
AS 60068.2.642003 TestsTest Fh: Vibration, broad-band random (digital control) and guidance (IEC 60068-2-64 Ed. 1.0 (Bilingual 1993)) 31pp
Provides two standard test methods (Method 1 and Method 2) for determining the ability of a specimen to withstand specified severities of broad-band random vibration. (EL-026)
AS 60068.2.752003 TestsTest Eh: Hammer tests (IEC 60068-2-75 Ed. 1.0 (Bilingual 1997)) 28pp
Provides three standardized and co-ordinated test methods for determining the ability of a specimen to withstand specified severities of impact. (EL-026)
AS 60068.2.652003 TestsTest Fg: Vibration, acoustically induced (IEC 60068-2-65 Ed. 1.0 (Bilingual 1993)) 21pp
Provides standard procedures and guidance for conducting acoustic tests in order to determine the ability of a specimen to withstand vibration caused by a specified sound-pressure level environment to which it is, or is liable to be, subjected. (EL-026)
AS 60068.2.772004 TestsTest 77: Body strength and impact shock (IEC 60068-2-77 Ed. 1.0 (Bilingual 1999)) 8pp
The AS60068 Standards include a series of environmental testing procedures, information on the severity of tests, and information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of the procedures are equally applicable to other industrial products. (EL-026)
AS 60068.3.52003 Supporting documentation and guidanceConfirmation of the performance of temperature chambers (IEC 60068-3-5 Ed. 1.0 (Bilingual 2001)) 7pp
Provides a uniform and reproducible method of confirming that temperature test chambers, without load, conform to the requirements specified in climatic test procedures of IEC 60068-2 and other standards. (EL-026)
AS 60068.2.662003 TestsTest Cx: Damp heat, steady state (unsaturated pressurized vapour) (IEC 60068-2-66 Ed. 1.0 (Bilingual 1994)) 13pp
Provides a standard test procedure for the purpose of evaluating, in an accelerated manner, the resistance of small electrotechnical products, primarily non hermetically sealed components, to the deteriorative effect of damp heat. (EL-026)
AS 60068.2.782003 TestsTest Cab: Damp heat, steady state (IEC 60068-2-78 Ed. 1.0 (Bilingual 2001)) 4pp
Provides a test method for determining the suitability of electrotechnical products, components or equipment for transportation, storage and use under conditions of high humidity. (EL-026)
AS 60068.3.62003 Supporting documentation and guidanceConfirmation of the performance of temperature/humidity chambers (IEC 60068-3-6 Ed. 1.0 (Bilingual 2001)) 6pp
Provides a uniform and reproducible method of confirming that temperature and humidity test chambers without load conform to the requirements, specified in climatic test procedures contained in IEC 60068-2 and is destined for users when conducting regular chamber performance monitoring. (EL-026)
AS 60068.2.672003 TestsTest Cy: Damp heat, steady state accelerated test primarily intended for components (IEC 60068-2-67 Ed. 1.0 (Bilingual 1995)) 6pp
Provides a standard test procedure for the purpose of evaluating, in an accelerated manner, the resistance of small electrotechnical products, primarily nonhermetically sealed components, to the deteriorative effect of damp heat. (EL-026)
AS 60068.2.812004 TestsTest Ei: ShockShock response spectrum synthesis (IEC 60068-2-81 Ed. 1.0 (Bilingual 2003)) 30pp
Part of a suite of Standards that adopt the IEC60068 series of Standards as Australian Standards. The series contains fundamental information on environmental testing procedures and severities of tests, including information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of the environmental testing procedures are equally applicable to other industrial products. (EL-026)
AS 60068.3.72003 Supporting documentation and guidanceMeasurements in temperature chambers for tests A and B (with load) (IEC 60068-3-7 Ed. 1.0 (Bilingual 2001)) 6pp
Provides a uniform and reproducible method of confirming that temperature test chambers conform to the requirements specified in climatic test procedure of IEC 60068-2-1 and IEC 60068-2-2, when loaded with either heat-dissipating or non heat-dissipating specimens under conditions which take into account air circulation inside the working space of the chamber. (EL-026)
237
AS 60068.3.82004
AS 60068.3.82004 Supporting documentation and guidanceSelecting amongst vibration tests (IEC 60068-3-8 Ed. 1.0 (Bilingual 2003)) 17pp
Part of a suite of Standards that adopt the IEC60068 series of Standards as Australian Standards. The series contains fundamental information on environmental testing procedures and severities of tests, including information on atmospheric conditions for measurement and testing. Although primarily intended for electrotechnical products, many of the environmental testing procedures are equally applicable to other industrial products. (EL-026) glands and Ex components, intended for use in explosive gas atmospheres. This Standard does not specify requirements for safety, other than those directly related to the explosion risk. (EL-014)
AS/NZS 60079.11:2006 Equipment protection by intrinsic safety i (IEC 60079-11 Ed. 5.0 (English 2006)) 107pp
Specifies the construction and testing of intrinsically safe apparatus intended for use in an explosive gas atmosphere and for associated apparatus, which is intended for connection to intrinsically safe circuits which enter such atmospheres (EL-014)
AS/NZS 60079.1:2007 Equipment protection by flameproof enclosures 'd' (IEC 60079-1 Ed. 6.0 (Bilingual 2007)) 67pp
Amendment 1 5 August 2008 Specifies the requirements for the construction and testing of electrical apparatus with the type of protection flameproof enclosure d, intended for use in explosive gas atmospheres. (EL-014)
AS 60068.42003 Information for specification writersTest summaries (IEC 60068-4 Ed. 1.0 (Bilingual 1987)) 85pp
Provides information in summarized form on the individual environmental tests in IEC 60068-2 to serve the purposes of specification writers and others when a knowledge of the detailed provisions of the complete standards is not required. (EL-026)
AS/NZS 60079.1.1:2002 Flameproof enclosures 'd'Method of test for ascertainment of maximum experimental safe gap (IEC 60079-1-1 Ed. 1.0 (Bilingual 2002)) 7pp
Specifies a test method for the measurement of the maximum experimental safe gaps for gas- or vapourair mixture under normal conditions of temperature and pressure so as to permit the selection of an appropriate group of flameproof enclosures. This Standard has been reproduced from and is identical to IEC 60079-1-1:2002. (EL-014)
AS/NZS 60079.12:2000 Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents (IEC/TR 60079-12 Ed. 1.0 (Bilingual 1978)) 10pp
Gives guidance on the selection fo the appropriate group or sub-group of electrical apparatus, protected by flameproof enclosure or designed to be intrinsically safe, according to the gas or vapour in which it is intended to be used. Provides a classification of most used gases and vapours and gives guidance on tests to classify additional gases or vapours not listed in this Standard. This Standard is identical with and has been reproduced from IEC/TR 60079-12:1978. (EL-014)
AS 60068.5.22003 Guide to drafting of test methodsTerms and definitions (IEC 60068-5-2 Ed. 1.0 (Bilingual 1990)) 12pp
Defines terms used in the environmental testing of specimens of electrotechnical products, such as components, subassemblies, assemblies and equipments. (EL-026)
AS/NZS 60079.2:2007 Equipment protection by pressurized enclosure p (IEC 60079-2 Ed. 5.0 (Bilingual 2007)) 44pp
Specifies the requirements for the construction and testing of electrical apparatus with pressurized enclosures, of protection type p, intended for use in explosive gas atmospheres. (EL-014)
AS/NZS 60079.15:2006 Construction, test and marking of type of protection, n electrical apparatus (IEC 60079-15 Ed. 3.0 (Bilingual 2005)) 67pp
Amendment 1 19 December 2006 This part of AS/NZS 60079 specifies requirements for the construction, testing and marking for Group II electrical apparatus with type of protection, n intended for use in explosive gas atmospheres. This part is applicable to non-sparking electrical apparatus and also to electrical apparatus with parts or circuits producing arcs or sparks or having hot surfaces which, if not protected in one of the way specified in this Standard, could be capable of igniting a surrounding explosive gas atmosphere. This Standard describes several different methods by which this can be achieved which may be combined with other methods described in AS/NZS60079.0. This part supplements the general requirements in AS/NZS60079.0. (EL-014)
AS 60076 Power transformers AS 60076.12005 General (IEC60076-1, Ed.2.1 (2000) MOD) 59pp
Gives technical requirements for single and threephase power transformers, including auto transformers, but excludes single-phase transformers rated at less than 1kVA, three-phase transformers rated at less than 5kVA, and certain special transformers such as instrument, starting, testing and welding transformers, transformers for static converters and those mounted on rolling stock. Includes Australian variations such as commonly used power ratings and preferred methods of cooling, connections in general use, and details regarding connection designation. (EL-008)
AS/NZS 60079.4:2000 Method of test for ignition temperature (IEC 60079-4 Ed. 2.0 (Bilingual 1975), IEC 60079-4 Amd.1 Ed. 2.0 (Bilingual 1995), IEC 60079-4A Ed. 2.0 (Bilingual 1970)) 15pp
Descrbes a test to determine the ignition temperature of a vapour or chemically pure gas in air, at atmospheric pressure. This Standard is identical with and has been reproduced from IEC 60079-4:1975, its Amendment 1:1995 and IEC 60079-4A:1970. (EL-014)
AS/NZS 60076.3:2008 Insulation levels, dielectric tests and external clearances in air (IEC 60076-3, Ed. 2 (2000) MOD) 59pp
Specifies dielectric tests and minimum external clearances in air between live parts of bushings and to objects at earth potential. (EL-008)
AS/NZS 60079.5:2007 Equipment protection by powdered filling 'q' (IEC 60079-5 Ed. 3.0 (Bilingual 2007)) 18pp
Contains the specific requirements for the construction, testing and marking of electrical apparatus, parts of electrical apparatus and Ex components in the type of protection powder filling q, intended for use in potentially explosive atmospheres of gas, vapour and mist. (EL-014)
AS/NZS 60079.18:2005 Construction, test and marking of type of protection encapsulation m electrical apparatus (IEC 60079-18 Ed. 2.0 (Bilingual 2004)) 25pp
Specifies requirements for the construction, testing and marking of electrical apparatus, parts of electrical apparatus and Ex components with the type of protection encapsulation m. This part of AS/NZS 60079 only applies for encapsulated electrical apparatus, encapsulated parts of electrical apparatus and encapsulated Ex components where the rated voltage does not exceed 10 kV with a relative tolerance of +10 %. This Standard supplements the general requirements in AS/NZS 60079.0. It is identical with and has been reproduced from IEC 60079-18:2004. (EL-014)
AS 60076.42006 Guide to the lightning impulse and switching impulse testingPower transformers and reactors (IEC 60076-4 Ed. 1.0 (English 2002)) 54pp
Provides guidance and comments on procedures for lightning and switching impulse testing of power transformers to supplement the requirements of IEC 60076-3. It is also applicable to testing reactors. (EL-008)
AS/NZS 60079.6:2007 Equipment protection by oil immersion 'o' (IEC 60079-6 Ed. 3.0 (Bilingual 2007)) 11pp
Specifies the requirements for the construction and testing of oil-immersed electrical apparatus, oilimmersed parts of electrical apparatus and Ex components in the type of protection o, intended for use in potentially explosive atmospheres of gas, vapour and mist. (EL-014)
AS/NZS 60079.20:2000 Data for flammable gases and vapours, relating to the use of electrical apparatus (IEC/TR 60079-20 Ed. 1.0 (Bilingual 1996)) 30pp
Amendment 1 25 July 2005 Gives guidance on the selection of appropriate electrical apparatus, protected by flame-proof enclosure or designed to be intrinsically safe, according to the gas or vapour in which it is intended to by used. (EL-014)
AS 60076.112006 Dry-type transformers (IEC 60076-11 Ed. 1.0 (English 2004)) 31pp
Specifies requirements for general purpose dry-type transformers with at least one winding with a voltage of at least 1.1 kV and no winding with a voltage exceeding 36 kV. (EL-008)
AS/NZS 60079.7:2006 Equipment protection by increased safety 'e' (IEC 60079-7 Ed. 4.0 (English 2006)) 70pp
Amendment 1 2 May 2007 Specifies the requirements for the design, construction, testing and marking of electrical apparatus with type of protection increased safety e intended for use in explosive gas atmospheres. (EL-014)
AS/NZS 60079.25:2004 Intrinsically safe systems (IEC 60079-25 Ed. 1.0 (Bilingual 2003)) 58pp
Provides the specific requirements for construction and assessment of intrinsically safe electrical systems, type of protection 'i', intended for use, as a whole or in part, in explosive atmospheres in Group II locations. (EL-014)
AS/NZS 60079 Set:2008 Electrical apparatus for explosive gas atmospheres Set 911pp AS/NZS 60079 Explosive atmospheres AS/NZS 60079.0:2008 EquipmentGeneral requirements (IEC 60079-0 Ed. 5.0 (Bilingual 2007)) 88pp
Specifies the general requirements for construction, testing and marking of electrical apparatus, Ex cable
AS/NZS 60079.26:2007 Equipment with equipment protection level (EPL) Ga (IEC 60079-26 Ed. 2.0 (Bilingual 2006)) 15pp
Specifies requirements for construction, test and marking for electrical apparatus of Group II intended for
238
AS 60092 Electrical installations in ships AS 60092.3502005 Shipboard power cablesGeneral construction and test requirements (IEC 60092-350 Ed. 2.0 (English 2001)) 38pp
Specifies the general constructional and test requirements for shipboard cables with copper conductors intended for power systems at voltages up to and including 8.7/15kV. This Standard is identical with, and has been reproduced from, IEC60092-350, Ed. 2 (2001). (EL-003)
materials on pieces taken from parts of equipment and on plaques of material using alternating voltages. (EL-002)
AS 60118 Hearing aids AS 60118.02007 Measurement of electroacoustical characteristics (IEC 60118-0 Ed. 2.0 (Bilingual 1983), IEC 60118-0 Amd.1 Ed. 2.0 (Bilingual 1994)) 16pp
Adopts IEC 60118-0 to describe the measurement of physical performance characteristics of air conduction hearing aids based on a free-field technique and measured with an ear simulator. (AV-003)
AS/NZS 60079.27:2008 Fieldbus intrinsically safe concept (FISCO) (IEC 60079-27 Ed. 2.0 (Bilingual 2008)) 9pp
Adopts IEC 60079-27, Ed. 2.0 (2008), to specify the requirements for design, construction, installation and marking of fieldbus intrinsically safe concept (FISCO) system. (EL-014)
AS/NZS 60079.28:2007 Protection of equipment and transmission systems using optical radiation (IEC 60079-28 Ed. 1.0 (Bilingual 2006)) 27pp
Explains the potential ignition hazard from equipment using optical radiation intended for use in explosive gas atmospheres. It also covers equipment, which itself is located outside but its emitted optical radiation enters such atmospheres. It describes precautions and requirements to be taken when using optical radiation transmitting equipment in explosive gas atmospheres. (EL-014)
AS 60092.3512005 Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables (IEC 60092-351 Ed. 3.0 (English 2004)) 11pp
Specifies the requirements for electrical, mechanical and particular characteristics of insulating materials intended for use in shipboard and fixed and mobile offshore unit power, control, instrumentation, telecommunication and data cables. This Standard is identical with, and has been reproduced from, IEC60092351, Ed. 3 (2004). (EL-003)
AS 60118.12007 Hearing aids with induction pick-up coil input (IEC 60118-1 Ed. 3.1 (Bilingual 1999)) 5pp
Adopts IEC 60118-1 to specify a method of determining the electroacoustic performance of hearing aids fitted with an induction pick-up coil and used in an audio-frequency magnetic field. (AV-003)
AS/NZS 60079.29.1:2008 Gas detectorsPerformance requirements of detectors for flammable gases (IEC 60079-29-1 Ed. 1.0 (Bilingual 2007)) 41pp
Specifies general requirements for construction, testing and performance, and describes the test methods that apply to portable, transportable and fixed apparatus for the detection and measurement of flammable gas or vapour concentrations with air. The apparatus, or parts thereof, are intended for use in potentially explosive atmospheres and in mines susceptible to firedamp. (EL-014)
AS 60092.3532005 Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1kV and 3kV (IEC 60092-353 Ed. 2.0 (Bilingual 1995)) 11pp
Specifies the constructional and test requirements for shipboard power cables with extruded solid insulation having a voltage rating of 0.6/1 (1.2)kV and 1.8/3 (3.6) kV intended for fixed installations. This Standard is identical with, and has been reproduced from, IEC60092-353, Ed. 2 (1995), including Amendment 1: 2001. (EL-003)
AS 60118.22007 Hearing aids with automatic gain control circuits (IEC 60118-2 Ed. 2.0 (Bilingual 1983), IEC 60118-2 Amd.1 Ed. 2.0 (Bilingual 1993), IEC 60118-2 Amd.2 Ed. 2.0 (Bilingual 1997)) 17pp
Adopts IEC 60118-2 to apply to hearing aids of any type with automatic gain control (AGC) circuits. (AV-003)
AS/NZS 60079.29.2:2008 Gas detectorsSelection, installation, use and maintenance of detectors for flammable gases and oxygen (IEC 60079-29-2 Ed. 1.0 (Bilingual 2007)) 85pp
Specifies general requirements for construction, testing and performance, and describes the test methods that apply to portable, transportable and fixed apparatus for the detection and measurement of flammable gas or vapour concentrations with air. The apparatus, or parts thereof, are intended for use in potentially explosive atmospheres and in mines susceptible to firedamp. (EL-014)
AS 60118.42007 Magnetic field strength in audiofrequency induction loops for hearing aid purposes (IEC 60118-3 Ed. 2.0 (Bilingual 1983)) 3pp
Adopts IEC 60118-4 to provide an input signal for hearing aids operating with an induction pickup coil. (AV-003)
AS 60092.3542005 Single- and three-core power cables with extruded solid insulation for rated voltages 6kV (Um = 7,2kV) up to 30kV (Um = 36kV) (IEC 60092-354 Ed. 2.0 (English 2003)) 13pp
Specifies the constructional and test requirements for shipboard and offshore power cables having voltage ratings of 3.6/6 (7.2)kV up to 8.7/15 (17.5)kV for shipboard cables and 3.6/6 (7.2)kV up to 18/30 (36)kV for offshore cables. The cables are intended for fixed installations. This Standard is identical with, and has been reproduced from, IEC60092-354, Ed. 2 (2003). (EL-003)
AS 60118.62007 Characteristics of electrical input circuits for hearing aids (IEC 60118-6 Ed. 2.0 (Bilingual 1999)) 2pp
Adopts IEC 60118-6 to specify the chemical and safety characteristics of a circuit for an external electrical input to a personal hearing aid in order to ensure compatibility with external electrical or electroacoustic signal sources. (AV-003)
AS/NZS 60079.30.1:2007 Electrical resistance trace heating General and testing requirements (IEC 60079-30-1 Ed. 1.0 (Bilingual 2007)) 21pp
Specifies general and testing requirements for electrical resistance trace heaters for application in explosive gas atmospheres. The standard covers trace heaters that may comprise either factory- or field- (work-site) assembled units, and which may be series heating cables, parallel heating cables or heating pads and heating panels that have been assembled and/or terminated in accordance with the manufacturers instructions. (EL-014)
AS 60092.3592005 Sheathing materials for shipboard power and telecommunication cables (IEC 60092-359 Ed. 1.2 (Bilingual 1999)) 5pp
Specifies the requirements for mechanical and particular characteristics of sheathing materials intended to be used in shipboard power and telecommunication cables. This Standard is identical with, and has been reproduced from, IEC60092-359, Ed. 1.2 (1999). (EL-003)
AS 60118.72007 Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes (IEC 60118-7 Ed. 2.0 (Bilingual 2005)) 17pp
Adopts IEC 60118-7 to give recommendations for the measurement of the performance characteristics of airconduction hearing aids of a particular model for production, supply and delivery quality assurance properties. (AV-003)
AS/NZS 60079.30.2:2007 Electrical resistance trace heating Application guide for design, installation and maintenance (IEC 60079-30-2, Ed. 1.0 (2007) MOD) 45pp
Provides guidance for the application of electrical resistance trace heating systems in areas where explosive gas atmospheres may be present, with the exception of those classified in zone 0. It provides recommendations for the design, installation, maintenance and repair of trace heating equipment and associated control and monitoring equipment. It does not cover devices that operate by induction heating, skin effect heating or direct pipeline heating, not those intended for stress relieving. (EL-014)
AS 60092.3762005 Cables for control and instrumentation circuits 150/250V (300V) (IEC 60092-376 Ed. 2.0 (English 2003)) 18pp
Specifies the constructional and test requirements for screened and unscreened cables for control and instrumentation circuits on ships and offshore units. The cables have extruded solid insulation with a voltage rating of 150/250V (300V) and are intended for fixed installations. This Standard is identical with, and has been reproduced from, IEC60092-376, Ed. 2 (2003). (EL-003)
AS 60118.82007 Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions (IEC 60118-8 Ed. 2.0 (Bilingual 2005)) 25pp
Adopts IEC 60118-8 to describe methods of test which simulates the acoustical effects of a median adult wearer on the performance of a hearing aid. (AV-003)
AS/NZS 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials 21pp
Specifies the method of test for the determination of the proof and comparative tracking indices of solid insulating
AS 60118.92007 Methods of measurement of characteristics of hearing aids with bone vibrator output (IEC 60118-9 Ed. 1.0 (Bilingual 1985)) 9pp
Adopts IEC 60118-9 to specify methods of measurement of the characteristics of hearing aids using bone vibrator output. (AV-003)
239
AS 60118.122007
AS 60118.122007 Dimensions of electrical connector systems (IEC 60118-12 Ed. 1.0 (Bilingual 1996)) 8pp
Adopts IEC 60118-12 to specify the dimensions of their tolerances essential for ensuring interchangeability. (AV-003)
tended to be read in conjunction with AS/NZS 2650. This Standard is technically equivalent to and contains the full content of IEC 60265:1998 and its Corrigendum:2000. (EL-007)
AS 60265.22005 High-voltage switches for rated voltages of 52kV and above (IEC60265-2, Ed.1.0(1988) MOD) 47pp
Specifies requirements for a.c. switches and switchdisconnectors having, making and breaking current ratings at rated voltages of 52kV and above for indoor and outdoor installations. (EL-007)
AS 60204.112006 Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 60204-11, Ed. 1.0 (2000) MOD) 47pp
Applies to the electrical and electronic equipment and systems of machines, including a group of machines working together in a coordinated manner, but excluding higher level system aspects (i.e. communications between systems). (EL-017)
AS 60269 Low-voltage fuses AS 60269.12005 General requirements (IEC 60269-1 Ed. 3.0 (Bilingual 1998), IEC 60269-1 Amd.1 Ed. 3.0 (Bilingual 2005), IEC 60269-1 Ed. 3.0 Cor.1 (Bilingual 2000)) 66pp
Applies to fuses incorporating enclosed current limiting fuse links with rated breaking capacities of not less than 6kA, intended for protecting power frequency a.c. circuits of nominal voltages not exceeding 1000V or d.c. circuits of nominal voltages not exceeding 1500V. (EL-007)
AS/NZS 60137:2008 Insulated bushings for alternating voltages above 1000 V (IEC 60137, Ed. 5.0 (2003) MOD) 47pp
Specifies the characteristics and tests for insulated bushings for electrical equipment with a voltage above 1000 V a.c. and a nominal frequency in the range 15-60 Hz. (EL-008)
AS 60214 Tap-changers AS 60214.12005 Performance requirements and test methods (IEC 60214-1 Ed. 1.0 (English 2003)) 52pp
Specifies minimum performance requirements and test methods for on-load tap-changers of both resistor and reactor types; off-circuit tap-changers, and their motor drive mechanisms. It applies to power and distribution transformers of all types and also to reactors. It does not apply to transformers and reactors mounted on railway rolling stock. (EL-008)
AS 60146 Semiconductor converters AS 60146.1.12002 General requirements and line commutated convertersSpecifications of basic requirements (IEC 60146-1-1 Ed. 3.0 (Bilingual 1991)) 54pp
Specifies the requirements for the performance of all electronic power converters and electronic power switches using electric valves (e.g. diodes, thyristors, transistors and triacs). This Standard has been reproduced from and is technically identical to IEC 601461-1:1991. (EL-027)
31pp
AS 60269.2.02005 Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) (IEC 60269-2 Ed. 2.0 (Bilingual 1986), IEC 60269-2 Amd.1 Ed. 2.0 (Bilingual 1995), IEC 60269-2 Amd.2 Ed. 2.0 (Bilingual 2001), IEC 60269-2 Ed. 2.0 Cor.1 (Bilingual 1996)) 6pp
Specifies common requirements, supplementary to the general requirements of AS60269.1, applicable to standardized fuse systems for use by authorized persons. (EL-007)
AS 60146.1.22002 General requirements and line commutated convertersApplication guide (IEC/TR 60146-1-2 Ed. 3.0 (Bilingual 1991)) 72pp
Gives guidance on variations to AS 60146.1.12002 to enable that Standard to be extended in a controlled form for special cases. This Standard has been reproduced from and is technically identical to IEC 601461-2:1991. (EL-027)
AS/NZS 60227 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V AS/NZS 60227.5:2003 Flexible cables (cords) (IEC 60227-5 Ed. 2.1 (Bilingual 1998)) 19pp
Amendment 1 13 August 2004 Provides the specification for polyvinyl chloride insulated flexible cable (cords) of rated voltages up to and including 300/500V. This Standard is identical with and has been reproduced from IEC 60227-5, Edition 2.1:1998. (EL-003)
AS 60269.2.12005 Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)Sections I to VI: Examples of types of standardized fuses (IEC 60269-2-1 Ed. 4.0 (English 2004)) 128pp
Specifies requirements, in addition to the general requirements of AS60269.1 and the supplementary requirements of AS 60269.2.0, applicable to specific examples of standardized fuse systems for use by authorized person. (EL-007)
AS 60146.1.32002 General requirements and line commutated convertersTransformers and reactors (IEC 60146-1-3 Ed. 3.0 (Bilingual 1991)) 9pp
Specifies characteristics where converter transformers differ from ordinary power transformers. This Standard has been reproduced from and is technically identical to IEC 60146-1-3:1991. (EL-027)
AS/NZS 60238:2007 Edison screw lampholders (IEC 60238, Ed.8.0 (2004) MOD) 70pp
Specifies requirements for Edison screw holders. (EL-041)
AS 60146.22001 Self-commutated semiconductor converters including direct d.c. converters (IEC 60146-2 Ed. 2.0 (Bilingual 1999)) 37pp
Amendment 1 15 March 2001 Specifies requirements for all types of semiconductor converters of the self-commutated type and semiconductor converters which contain at least one part of a self-commutated type, including direct a.c. converters and d.c. converters for all applications. This Standard is identical to and has been reproduced from IEC 60146-2:1999. (EL-027)
AS/NZS 60245 Rubber insulated cablesRated voltage up to and including 450/750 V AS/NZS 60245.4:2003 Cords and flexible cables (IEC 60245-4 Ed. 2.0 (Bilingual 1994), IEC 60245-4 Amd.1 Ed. 2.0 (Bilingual 1997)) 17pp
Amendment 1 16 December 2004 Provides the specification for rubber insulated flexible cords and flexible cables of rated voltages up to and including 450/750 V. This Standard is identical with and has been reproduced from IEC 60245-4:1994. (EL-003)
AS 60269.3.02005 Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) (IEC 60269-3 Ed. 2.0 (Bilingual 1987), IEC 60269-3 Amd.1 Ed. 2.0 (Bilingual 2003)) 9pp
Applies to gG fuses for use by unskilled persons for domestic and similar applications with rated currents not exceeding 100A and rated voltages not exceeding 500Va.c. (EL-007)
AS/NZS 60155:2000 Glow-starters for fluorescent lamps (IEC 60155 Ed. 4.0 (Bilingual 1993), IEC 60155 Amd.1 Ed. 4.0 (Bilingual 1995)) 25pp
Amendment 1 1 May 2000 Amendment 2 11 August 2000 Specifies general and safety requirements for glow-starters for fluorescent lamps. It is reproduced from IEC 60155:1993 and IEC 60155/Amd.1:1995 but has additional local requirements for ignitability and combustion propagation. In Australia it supersedes both AS 31381993 and AS 41111993 on 1 January 2002. (EL-041)
AS/NZS 60265 High-voltage switches AS/NZS 60265.1:2001 Switches for rated voltages above 1 kV and less than 52 kV (IEC 60265-1 Ed. 3.0 (Bilingual 1998), IEC 60265-1 Ed. 3.0 Cor.1 (Bilingual 2000)) 47pp
Applies to three-phase a.c. switches and switchdisconnectors having making and breaking current ratings, for indoor and outdoor installations, for rated voltages above 1 kV and less than 52 kV and for rated frequencies from 16 2/3 Hz up to and including 60 Hz. Is also applicable to the operating devices of these switches and to their auxiliary equipment. It is in-
AS 60269.3.12005 Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) Sections I to IV: Examples of types of standardized fuses (IEC 60269-3-1 Ed. 2.0 (Bilingual 2004)) 111pp
Provides additional specific requirements to AS60269.1 and AS60269.3.0 for gG type fuses with rated currents not exceeding 100A and rated voltages not exceeding 500V for use by un-skilled persons for domestic and similar applications. (EL-007)
AS 60269.4.02005 Supplementary requirements for fuselinks for the protection of semiconductor devices (IEC 60269-4 Ed. 3.0 (Bilingual 1986), IEC 60269-4 Amd.1 Ed. 3.0 (Bilingual 1995), IEC 60269-4 Amd.2 Ed. 3.0 (Bilingual 2002), IEC 60269-4 Amd.2 Ed. 3.0 Cor.1 (Bilingual 2003)) 28pp
240
AS IEC 60300.3.112004 Application guideReliability centred maintenance (IEC 60300-3-11 Ed. 1.0 (Bilingual 1999)) 48pp
Provides guidelines for the development of an initial preventive maintenance programme for equipment and structures using reliability centred maintenance (RCM) analysis techniques. References to a maintenance programme in this Standard implies that it is a preventive maintenance programme. It is identical with, and has been reproduced from IEC 60100-311:1999. (QR-005)
AS 60269.4.12005 Supplementary requirements for fuselinks for the protection of semiconductor devicesSections I to IIIExamples of types of standardized fuse-links (IEC 60269-4-1 Ed. 1.0 (Bilingual 2002)) 14pp
Provides additional specific requirements and tests to AS60269.1 and AS6009.4.0 for specific examples of standardized fuse-links for the protection of semiconductor devices. (EL-007)
Specifies essential safety and associated requirements for two-pole interconnection couplers for a.c. only, with or without an earthing contact and having a rated voltage not exceeding 250 V and a rated current not exceeding 16A. The couplers are intended for the interconnection of the electrical supply to electrical appliances or equipment. AnnexZZ lists variations for Australian and New Zealand conditions. (EL-004)
AS/NZS 60335 Household and similar electrical appliances Safety AS/NZS 60335.1:2002 General requirements (IEC 60335-1 Ed 4.2, MOD) 127pp
Amendment 1 31 May 2004 Amendment 2 25 May 2007 Amendment 3 30 November 2007 Deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. (EL-002)
AS 602702001 High-voltage test techniquesPartial discharge measurements (IEC 60270 Ed. 3.0 (Bilingual 2000)) 41pp
Applies to the measurement of partial discharges which occur in electrical apparatus, components or systems when tested with alternating voltages up to 400 Hz or with direct voltage. Defines the quantities to be measured and describes test and measuring circuits which may be used. It is intended that the provisions of this Standard should be used in the drafting of specifications relating to partial discharge measurements for specific power apparatus. This Standard is identical to and has been reproduced from IEC 60270:2000. (EL-007)
AS IEC 60300.3.122004 Application guideIntegrated logistic support (IEC 60300-3-12 Ed. 1.0 (Bilingual 2001)) 40pp
Provides an application guide intended for use by a wide range of suppliers including large and small companies wishing to offer a competitive and quality product which is optimised for the purchaser and supplier for the complete product life cycle. This Standard can be applied to both commercial and military products. It describes the process of ILS, and the various minimal common practices and logistic data analyses that should be undertaken to meet this objective. It is identical with, and has been reproduced from IEC 60300-3-12:2001. (QR-005)
AS/NZS 60335.2.2:2002 Particular requirements for vacuum cleaners and water suction cleaning appliances (IEC 60335-2-2 Ed 5.2, MOD) 24pp
Amendment 1 17 June 2005 Amendment 2 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-2:2002. (EL-002)
AS IEC 60300 (Set)2005 Dependability Management Set AS IEC 60300 Dependability management AS IEC 60300.12004 Dependability management systems (IEC 60300-1 Ed. 2.0 (English 2003)) 12pp
Provides general guidance on establishing a dependability management system to meet most organizational or project needs. This is the first Standard in a series that includes a toolbox of non-prescriptive standards on a range of reliability, availability and maintainability application guidelines and methods. It is identical with and has been reproduced from IEC 60300-1:2003. (QR-005)
AS IEC 60300.3.142005 Application guideMaintenance and maintenance support (IEC 60300-3-14 Ed. 1.0 (Bilingual 2004)) 36pp
Provides an outline of maintenance, maintenance support and management processes and techniques to achieve dependability. Identical with IEC 60300-3-14, Ed.1.0 (2004). (QR-005)
AS 603052007 Insulators for overhead lines with a nominal voltage above 1000 VCeramic or glass insulator units for a.c. systemsCharacteristics of insulator units of the cap and pin type (IEC 60305 Ed. 4.0 (English 1995)) 5pp
Specifies characteristics for cap and pin insulators for use on overhead power lines. (EL-010)
AS/NZS 60335.2.3:2002 Particular requirementsParticular requirements for electric irons (IEC 60335-2-3 Ed. 5.0 (English 2002)) 20pp
Amendment 1 25 November 2005 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-3:2002. (EL-002)
AS IEC 60300.22005 Guidance for dependability programme management (IEC 60300-2 Ed. 2.0 (Bilingual 2004)) 44pp
Provides guidelines for managing dependability programmes, as part of a suite of Standards. Identical with IEC60300-2, Ed.2.0 (2004). (QR-005)
AS 603111999 Electric irons for household or similar use Methods for measuring performance (IEC 60311 Ed. 3.0 (Bilingual 1995), IEC 60311 Amd.1 Ed. 3.0 (Bilingual 1997), IEC 60311 Amd.2 Ed. 3.0 (Bilingual 1999)) 36pp
Specifies test methods for measuring the principal performance characteristics of electric irons for household and similar use. This Standard is identical with and has been reproduced from IEC 60311:Edition 3:1995 consolidated with Amendment 1:1997, and IEC 60311:1997 Amendment 2:1999. (EL-015)
AS/NZS 60335.2.4:2002 Particular requirementsParticular requirements for spin extractors (IEC 60335-2-4 Ed. 5.0 (English 2002)) 19pp
Amendment 1 15 October 2004 Amendment 2 20 October 2006 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-4:2002. (EL-002)
AS IEC 60300.3.12003 Application guideAnalysis techniques for dependabilityGuide on methodology (IEC 60300-3-1 Ed. 2.0 (English 2003)) 55pp
Provides a general overview of commonly used dependability analysis techniques. It describes the usual methodologies, their advantages and disadvantages, data input and other conditions for using various techniques. This Standard is identical with and reproduced from IEC 60300-3-1:2003. (QR-005)
AS/NZS 60320 Appliance couplers for household and similar general purposes AS/NZS 60320.1:2004 General requirements (IEC60320-1, Ed. 2.0 (2001) MOD) 120pp
Specifies essential safety and associated requirements for two-pole appliance couplers for a.c. only, with or without earthing contact, with a rated voltage not exceeding 250V and a rated current not exceeding 16A, for household and similar general purposes and intended for the connection of a supply cord to electrical appliances or other electrical equipment for 50 Hz or 60 Hz supply. AnnexZZ lists variations for Australian and New Zealand conditions. (EL-004)
AS/NZS 60335.2.5:2002 Particular requirementsParticular requirements for dishwashers (IEC 60335-2-5 Ed. 5.0 (English 2002)) 21pp
Amendment 1 25 November 2005 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-5:2002. (EL-002)
AS IEC 60300.3.32005 Application guideLife cycle costing (IEC 60300-3-3 Ed. 2.0 (English 2004)) 54pp
Provides a general introduction to the concept of life cycle costing, particularly the costs associated with dependability of the product. Identical with IEC60300-3-3, Ed.2.0(2004). (QR-005)
AS/NZS 60335.2.6:2008 Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances (IEC 60335-2-6 Ed 5.2, MOD) 47pp
Amendment 1 12 December 2008 (EL-002)
AS IEC 60300.3.102004 Application guideMaintainability (IEC 60300-3-10 Ed. 1.0 (Bilingual 2001)) 28pp
Provides guidance on how the maintenance aspects of the tasks should be considered in order to achieve optimum maintainability. It should be noted that the full programme described in this Standard would only be applied to a major complex product with the potential for long-term usage. It is identical with, and has been reproduced from IEC 60300-3-10:2001. (QR-005)
AS/NZS 60320.2.1:2004 Sewing machine couplers (IEC 60320-2-1, Ed. 2.0 (2000) MOD) 8pp
Specifies essential safety and associated requirements for special purpose appliance couplers for household sewing machines and suitable for a.c. only with a rated voltage not exceeding 250V and a rated current not exceeding 25A. AnnexZZ lists variations for Australian and New Zealand conditions. (EL-004)
AS/NZS 60335.2.6:2002 Particular requirementsParticular requirements for stationary cooking ranges, hobs, ovens and similar appliances (IEC 60335-2-6 Ed. 5.0 (English 2002)) 43pp Available Superseded
Amendment 1 Amendment 2 Amendment 3 Amendment 4 17 June 2005 25 November 2005 23 June 2006 20 October 2006
AS/NZS 60320.2.2:2004 Interconnection couplers for household and similar equipment (IEC 60320-2-2, Ed. 2.0 (1998) MOD) 35pp
241
AS/NZS 60335.2.7:2002
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-6:2002. (EL-002)
AS/NZS 60335.2.13:2004 Particular requirements for deep fat fryers, frying pans and similar appliances (IEC 60335-2-13 Ed. 5.0 (English 2002)) 9pp
Amendment 1 17 June 2005 Amendment 2 31 October 2008 Deals with the safety of electric deep fat fryers, frying pans and other appliances in which oil is used for cooking, and intended for household use only, their rated voltage being not more than 250 V. (EL-002)
AS/NZS 60335.2.23:2004 Particular requirements for appliances for skin or hair care (IEC 60335-2-23 Ed. 5.0 (English 2003)) 17pp
Amendment 1 30 May 2008 This standard deals with the safety of electric appliances for the care of skin or hair of persons or animals and intended for household and similar purposes, their rated voltage being not more than 250 V. (EL-002)
AS/NZS 60335.2.7:2002 Particular requirementsParticular requirements for washing machines (IEC 60335-2-7 Ed. 6.0 (English 2002)) 24pp
Amendment 1 15 October 2004 Amendment 2 20 October 2006 Amendment 3 30 May 2008 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-7:2002. (EL-002)
AS/NZS 60335.2.14:2007 Particular requirements for kitchen machines (IEC 60335-2-14: Ed 5.0, MOD) 28pp
Deals with the safety of electric kitchen machines for household and similar purposes, their rated voltage being not more than 250 V. (EL-002)
AS/NZS 60335.2.24:2003 Particular requirements for refrigerating appliances, ice-cream appliances and icemakers 52pp
Amendment 1 Amendment 2 Amendment 3 25 November 2005 30 November 2007 30 June 2008 (EL-002)
AS/NZS 60335.2.8:2004 Particular requirements for shavers, hair clippers and similar appliances (IEC 60335-2-8 Ed. 5.0 (English 2002)) 10pp
Amendment 1 23 June 2006 Deals with the safety of electric shavers, hair clippers and similar appliances, their rated voltage being not more than 250 V, intended for household and similar purposes. Examples of similar appliances are those used for manicure and pedicure. Appliances intended to be used by laymen in shops and on farms, are within the scope of this standard. Examples of such appliances are animal clippers, animal shearers and appliances for hairdressers. (EL-002)
AS/NZS 60335.2.14:2004 Particular requirements for kitchen machines (IEC 60335-2-14 Ed. 4.0 (English 2002)) 22pp Available Superseded
This standard deals with the safety of electric kitchen machines for household and similar purposes, their rated voltage being not more than 250 V. Specifies particular safety requirements for approval and test purposes. (EL-002)
AS/NZS 60335.2.25:2002 Particular requirements for microwave ovens, including combination microwave ovens (IEC 60335-2-25 Ed 5.2, IDT) 26pp
Amendment 1 17 June 2005 Amendment 2 23 June 2006 Amendment 3 23 June 2006 Amendment 4 25 May 2007 Deals with the safety of microwave ovens for household use, their rated voltage being not more than 250 V. (EL-002)
AS/NZS 60335.2.9:2002 Particular requirementsParticular requirements for grills, toasters and similar portable cooking appliances (IEC 60335-2-9 Ed. 5.0 (English 2002)) 31pp
Amendment 1 31 May 2004 Amendment 2 17 June 2005 Amendment 3 25 November 2005 Amendment 4 20 October 2006 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-9:2002. (EL-002)
AS/NZS 60335.2.15:2002 Particular requirementsParticular requirements for appliances for heating liquids (IEC 60335-2-15 Ed. 5.0 (Bilingual 2003)) 25pp
Amendment 1 14 November 2003 Amendment 2 4 December 2003 Amendment 3 23 June 2006 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-15:2002. (EL-002)
AS/NZS 60335.2.16:2006 Particular requirements for food waste disposers(IEC 60335-2-16 Ed 5, IDT) 8pp
This International Standard deals with the safety of electric food waste disposers for household and similar purposes, their rated voltage being not more than 250 V. Appliances not intended for normal household use but that nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. (EL-002)
AS/NZS 60335.2.27:2004 Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation (IEC 60335-2-27 Ed. 4.0 (Bilingual 2003)) 16pp
Amendment 1 17 June 2005 Amendment 2 30 November 2007 Deals with the safety of appliances for skin exposure to ultraviolet or infrared radiation, intended for normal household as well as tanning salon and beauty parlor use. Appliance rated voltage being not more than 250 V single phase and 480 V for other appliances. (EL-002)
AS/NZS 60335.2.10:2006 Particular requirements for floor treatment machines and wet scrubbing machines(IEC 60335-2-10 Ed 5, IDT) 8pp
This standard deals with the safety of electric floor treatment and wet scrubbing machines intended for household and similar purposes, their rated voltage being not more than 250 V. This standard does not apply to vacuum cleaners and water suction cleaning appliances, appliances intended for industrial purposes, appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour, or gas) and floor sanding machines. (EL-002)
AS/NZS 60335.2.17:2004 Particular requirements for blankets, pads and similar flexible heating appliances (IEC 60335-2-17 Ed. 2.0 (English 2002)) 48pp
Amendment 1 20 October 2006 This standard deals with the safety of electric blankets, pads and other flexible appliances which heat the bed or human body, for household and similar purposes, their rated voltage being not more than 250 V. It also applies to control units supplied with the appliance. (EL-002)
AS/NZS 60335.2.28:2006 Particular requirements for sewing machines (IEC 60335-2-28 Ed 4, IDT) 8pp
This International Standard deals with the safety of electric sewing machines for household and similar use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Overlock machines and electrical sets are within the scope of the standard. (EL-002)
AS/NZS 60335.2.11:2002 Particular requirements for tumble dryers (IEC 60335-2-11 Ed 6, MOD) 23pp
Amendment 1 31 May 2004 Amendment 2 25 May 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-11:2002. (EL-002)
AS/NZS 60335.2.29:2004 Particular requirements for battery chargers (IEC 60335-2-29 Ed. 4.0 (Bilingual 2003)) 13pp
Amendment 1 15 October 2004 Deals with the safety of electric battery chargers for household use having an output at safety extra-low voltage, their rated voltage being not more than 250 V. This standard also includes battery chargers intended for use in garages, shops, light industry and on farms. (EL-002)
AS/NZS 60335.2.12:2004 Particular requirements for warming plates and similar appliances (IEC 60335-2-12 Ed. 5.0 (English 2002)) 9pp
Deals with the safety of electric warming plates, warming trays and similar appliances intended to keep food or vessels warm, for household and similar purposes, their rated voltage being not more than 250 V. Appliances intended to be used by laymen in shops, in light industry and on farms, are also within the scope of this standard. (EL-002)
AS/NZS 60335.2.21:2002 Particular requirementsParticular requirements for storage water heaters (IEC 60335-2-21 Ed. 5.0 (English 2002)) 27pp
Amendment 1 15 October 2004 Amendment 2 17 June 2005 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-21:2002. (EL-002)
AS/NZS 60335.2.30:2004 Particular requirements for room heaters (IEC 60335-2-30 Ed. 4.0 (Bilingual 2003)) 22pp
Amendment 1 17 June 2005 Amendment 2 25 November 2005 Amendment 3 25 May 2007 Amendment 4 30 November 2007 Amendment 5 30 May 2008 Applicable to the safety of electric room heaters, their rated voltage being not more than 250 V for single phase and 480 V for other appliances, for household and similar purposes. Appliances intended to be used
242
AS/NZS 60335.2.31:2004 Particular requirements for range hoods (IEC 60335-2-31 Ed. 4.0 (English 2002)) 14pp
Amendment 1 20 October 2006 Amendment 2 30 November 2007 Deals with the safety of electric range hoods intended to be installed above household cooking ranges, hobs, and similar cooking appliances, their rated voltage being not more than 250 V. (EL-002)
AS/NZS 60335.2.44:2006 Particular requirements for ironers (IEC 60335-2-44 Ed 3, IDT) 11pp
This International Standard deals with the safety of electric ironers for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. Examples of appliances within the scope of this standard are ironing presses for one-person operation; mangles; rotary ironers for one-person operation; trouser presses. (EL-002)
AS/NZS 60335.2.55:2004 Particular requirements for electrical appliances for use with aquariums and garden ponds (IEC 60335-2-55 Ed. 3.0 (English 2002)) 15pp
Amendment 1 23 June 2006 Deals with the safety of electric appliances for use with aquariums and garden ponds for household and similar purposes, their rated voltage being not more than 250 V. Examples of appliances within the scope of this standard are aerators; aquarium heaters; automatic food dispensers; sludge-suction appliances. (EL-002)
AS/NZS 60335.2.32:2004 Particular requirements for massage appliances (IEC 60335-2-32 Ed. 4.0 (English 2002)) 12pp
Amendment 1 30 May 2008 Deals with the safety of electric massage appliances for household and similar purposes, their rated voltage being not more than 250 V for single phase and 480 V for other appliances. Some examples of appliances within the scope of this standard are foot massagers, hand-held massagers, massage beds, massage chairs, massage pads and massage belts. (EL-002)
AS/NZS 60335.2.45:2004 Particular requirements for portable heating tools and similar appliances (IEC 60335-2-45 Ed. 3.0 (English 2002)) 20pp
Deals with the safety of portable electric heating tools and similar appliances, their rated voltage being not more than 250 V. Examples of appliances that are within the scope of this standard are branding tools; burning-in pens; conduit-soldering tools; dehorning tools; de-soldering irons; firelighters; glue guns; heat guns; paint strippers; plastic-cutting tools; soldering guns; soldering irons; stripping pliers and thermoplastic conduit-welding tools. (EL-002)
AS/NZS 60335.2.56:2006 Particular requirements for projectors and similar appliances (IEC 60335-2-56 Ed 3, IDT) 11pp
This International Standard deals with the safety of electric projectors and similar appliances for household and similar purposes, their rated voltage being not more than 250 V. Examples of appliances that are within the scope of this standard are effects projectors; film-strip projectors; film viewers; microscope projectors; motion-picture projectors; opaque projectors (episcopes); opaque-transparency projectors (epidiascopes); overhead projectors; photographic enlargers; photo-reproduction appliances; slide projectors (diascopes); slide-sorting appliances; still viewers. Appliances may incorporate sound amplifiers. (EL-002)
31pp
Amendment 1 25 November 2005 Deals with the safety of sealed (hermetic and semihermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. (EL-002)
AS/NZS 60335.2.51:2006 Particular requirements for stationary circulation pumps for heating and service water installations (IEC 60335-2-51 Ed 3, IDT) 8pp
This International Standard deals with the safety of electric stationary circulation pumps intended for use in heating systems or in service water systems, having a rated power input not exceeding 300 W, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. The hydraulic and electrical parts of the pump may be in the same enclosure, so that the water flows through the motor and serves as a coolant, or they may be separated. (EL-002)
AS/NZS 60335.2.59:2005 Particular requirements for insect killers (IEC 60335-2-59 Ed 3.0, MOD) 21pp
Amendment 1 25 November 2005 Amendment 2 20 October 2006 This Standard deals with the safety of electric insect killers, their rated voltage being not more than 250 V, for household and similar purposes. (EL-002)
AS/NZS 60335.2.35:2004 Particular requirements for instantaneous water heaters (IEC 60335-2-35 Ed 4.1, IDT) 22pp
Amendment 1 25 May 2007 Deals with the safety of electric instantaneous water heaters for household and similar purposes and intended for heating water below boiling temperature. The rated voltage being not more than 250 V for single phase and 480 V for other appliances. (EL-002)
AS/NZS 60335.2.60:2006 Particular requirements for whirlpool baths and whirlpool spas(IEC 60335-2-60 Ed 3.1, MOD) 12pp
This International Standard deals with the safety of electric whirlpool baths for indoor use and whirlpool spas, for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard also applies to appliances for circulating air or water in conventional baths. (EL-002)
AS/NZS 60335.2.40:2006 Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40 Ed 4.2, IDT) 59pp
This International Standard deals with the safety of electric heat pumps, including sanitary hot water heat pumps, air-conditioners, and dehumidifiers incorporating motor-compressors and hydronic room fan coils, their maximum rated voltages being not more than 250 V for single phase appliances and 600 V for all other appliances. (EL-002)
AS/NZS 60335.2.52:2006 Particular requirements for oral hygiene appliances (IEC 60335-2-52 Ed 3, IDT) 7pp
This International Standard deals with the safety of electric oral hygiene appliances for household and similar purposes, their rated voltage being not more that 250 V. Examples of appliances covered by this standard are oral irrigators; toothbrushes. This standard does not apply to appliances for medical purposes (IEC 60601). (EL-002)
AS/NZS 60335.2.61:2005 Particular requirements for thermalstorage room heaters (IEC 60335-2-61 Ed 2.0, MOD) 26pp
Amendment 1 25 November 2005 This Standard deals with the safety of electric thermalstorage room heaters for household and similar purposes that are intended to heat the room in which they are located, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances (EL-002)
AS/NZS 60335.2.41:2004 Particular requirements for pumps (IEC 60335-2-41 Ed. 3.1 (English 2004)) 17pp
Deals with the safety of electric pumps for liquids having a temperature not exceeding 90 deg C, with a rated voltage of not more than 250 V for single-phase and 480 V for other appliances. Examples of appliances within the scope of this standard are aquarium pumps; pumps for garden ponds; sludge pumps; submersible pumps; table fountain pumps; vertical wet pit pumps. Pumps incorporated in appliances are not covered by this standard unless a specific reference is made. (EL-002)
AS/NZS 60335.2.53:2006 Particular requirements for sauna heating appliances (IEC 60335-2-53 Ed. 3.0 (Bilingual 2005)) 13pp
Amendment 1 30 November 2007 Deals with the safety of electric sauna heating appliances having a rated power input not exceeding 20 kW, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances. Sauna heating appliances may be of the thermal storage type. This standard does not apply to appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapor or gas); appliances intended to cause perspiration to only one part of the human body; sweating baths where the head of the user remains outside the heated space; tents and other collapsible sauna baths. (EL-002)
AS/NZS 60335.2.65:2006 Particular requirements for air-cleaning appliances (IEC 60335-2-65 Ed 3, IDT) 8pp
This International Standard deals with the safety of electric air-cleaning appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for all other appliances. Appliances not intended for normal household use but that nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. (EL-002)
AS/NZS 60335.2.43:2005 Particular requirements for clothes dryers and towel rails (IEC 60335-2-43 Ed 3.0, MOD) 16pp
Amendment 1 20 October 2006 This Standard deals with the safety of electric clothes dryers for drying textiles on racks located in a warm airflow and to electric towel rails, for household and similar purposes, their rated voltage being not more than 250 V. The clothes racks may be fixed or freestanding in a cabinet. The air circulation may be natural or forced. This standard does not apply to tumble dryers (refer to IEC 60335-2-11 for tumble dryers). (EL-002)
AS/NZS 60335.2.54:2005 Particular requirements for surfacecleaning appliances for household use employing liquids or steam (IEC 60335-254 Ed 3.1, IDT) 24pp
Amendment 1 30 November 2007 This Standard deals with the safety of electric cleaning appliances for household use that are intended for cleaning surfaces such as windows, walls, and empty swimming pools by use of liquid cleansing agents or steam. The rated voltage of the appliance being not more than 250 V. The appliance may incorporate heating elements or means for pressurizing the liquid container. (EL-002)
AS/NZS 60335.2.66:2004 Particular requirements for water-bed heaters (IEC 60335-2-66 Ed. 2.0 (English 2002), IEC 60335-2-66 Ed. 2.0 Cor.1 (Bilingual 2004)) 18pp
Deals with the safety of electric water-bed heaters and associated control units, their rated voltage being not more than 250 V, for household and similar purposes. Appliances intended to be used in hotels, are also within the scope of this standard (EL-002)
243
AS/NZS 60335.2.67:2002
AS/NZS 60335.2.67:2002 Particular requirementsParticular requirements for floor treatment and floor cleaning machines, for industrial and commercial use (IEC 60335-2-67 Ed. 3.0 (English 2002)) 21pp
Amendment 1 20 October 2006 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-67:2002. (EL-002)
AS/NZS 60335.2.74:2005 Particular requirements for portable immersion heaters (IEC 60335-2-74 Ed 2.0, IDT) 15pp
Amendment 1 30 November 2007 This Standard deals with the safety of portable electric immersion heaters, their rated voltage being not more than 250 V, for household and similar purposes. Also includes appliances intended for use by laymen in shops, in light industry and on farms. (EL-002)
shops, light industry and on farms, are within the scope of this standard. (EL-002)
AS/NZS 60335.2.81:2006 Particular requirements for foot warmers and heating mats (IEC 60335-2-81 Ed. 2.0 (Bilingual 2002)) 16pp
Amendment 1 30 November 2007 Deals with the safety of electric foot warmers and heating mats for household and similar purposes. The rated voltage being not more than 250 V. Appliances intended to be used by layman in shops, in light industry and on farms are within the scope of this standard. (EL-002)
AS/NZS 60335.2.68:2003 Particular requirements for spray extraction appliances, for industrial and commercial use (IEC 60335-2-68 Ed. 3.0 (English 2002)) 24pp
Amendment 1 20 October 2006 Amendment 2 30 November 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-68:2002. (EL-002)
AS/NZS 60335.2.75:2005 Particular requirements for commercial dispensing appliances and vending machines (IEC 60335-2-75 Ed. 2.1 (Bilingual 2005)) 29pp
This Standard deals with the safety of electric commercial dispensing appliances and vending machines for preparation or delivery of food, drinks and consumer products, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances. Examples of appliances that are within the scope of this standard are bulk tea or coffee brewing machines, cigarette, hot and cold beverage, newspaper, audio or video tape or disc vending machines, ice cream, whipped cream and ice dispensers, commercial liquid heaters, espresso coffee appliances and packaged food and drink vending machines. (EL-002)
AS/NZS 60335.2.82:2006 Particular requirements for amusement machines and personal service machines (IEC 60335-2-82 Ed. 2.0 (English 2002)) 14pp
Amendment 1 31 October 2008 Deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for singlephase and 480 V for other appliances. Examples of amusement machines that are within the scope of this standard are billiard tables; bowling machines; dartboards; driving simulators; gaming machines; kiddie rides;laser shooting appliances; pinball machines; video games. Examples of personal service machines that are within the scope of the standard are card revalue machines; currency dispensers; luggage lockers; weighing machines; shoe shining appliances. (EL-002)
AS/NZS 60335.2.69:2003 Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use (IEC 60335-2-69 Ed. 3.0 (English 2002)) 40pp
Amendment 1 25 November 2005 Amendment 2 31 October 2008 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-69:2002. (EL-002)
AS/NZS 60335.2.76:2003 Particular requirements for electric fence energizers (IEC 60335-2-76 Ed. 2.0 (English 2002)) 46pp
Amendment 1 20 October 2006 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-76:2002. (EL-002)
AS/NZS 60335.2.83:2002 Particular requirements for heated gullies for roof drainage (IEC 60335-2-83:2001, IDT) 10pp
Deals with the safety of electrically heated gullies for de-icing the inlet of the drainage system of flat roofs, balconies, and similar structures, their rated voltage being not more than 250 V. (EL-002)
AS/NZS 60335.2.70:2002 Particular requirementsParticular requirements for milking machines (IEC 60335-2-70 Ed. 2.0 (English 2002)) 19pp
Amendment 1 30 November 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-67:2002. (EL-002)
AS/NZS 60335.2.77:2002 Particular requirementsParticular requirements for pedestrian controlled mains-operated lawnmowers (IEC 60335-2-77 Ed. 2.0 (Bilingual 2002)) 58pp
Amendment 1 14 November 2003 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-77:2002. (EL-002)
AS/NZS 60335.2.84:2006 Particular requirements for toilets (IEC 60335-2-84 Ed. 2.0 (Bilingual 2005)) 12pp
Amendment 1 31 October 2008 Deals with the safety of electric toilets in which excrement is stored, dried, or destructed, their rated voltage being not more than 250 V. Electric toilets may be used to process garbage such as paper and food waste. This standard also applies to electric equipment for use with conventional toilets, examples of such equipment are automatic seat covering devices; chopping units; heated seats; pumping units; water heaters for shower units. (EL-002)
AS/NZS 60335.2.71:2002 Particular requirementsParticular requirements for electrical heating appliances for breeding and rearing animal (INVALID IEC 60335-2-71 Ed. 2.0 (English 2002)) 19pp
Amendment 1 30 November 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-71:2002. (EL-002)
AS/NZS 60335.2.78:2005 Particular requirements for outdoor barbeques (IEC 60335-2-78 Ed 2.0, IDT) 15pp
Amendment 1 20 October 2006 This Standard deals with the safety of electric outdoor barbecues for household and similar use, their rated voltage being not more than 250 V. This standard does not apply to barbecues for indoor use, appliances intended to burn charcoal or similar combustible fuels, appliances intended exclusively for industrial purposes, appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapor or gas). (EL-002)
AS/NZS 60335.2.85:2005 Particular requirements for fabric steamers (IEC 60335-2-85 Ed 2.0, IDT) 17pp
This Standard deals with the safety of electric fabric steamers intended for household and similar purposes, their rated voltage being not more than 250 V. Appliances not intended for normal household use, such as appliances to be used by laymen in laundries and dry cleaners, are within the scope of this standard. (EL-002)
AS/NZS 60335.2.72:2003 Particular requirements for automatic machines for floor treatment for commercial and industrial use (IEC 60335-2-72 Ed. 2.0 (English 2002)) 28pp
Amendment 1 20 October 2006 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-72:2002. (EL-002)
AS/NZS 60335.2.79:2002 Particular requirementsParticular requirements for high pressure cleaners and steam cleaners, for industrial and commercial use (IEC 60335-2-79 Ed. 2.0 (English 2002)) 30pp
Amendment 1 25 November 2005 Amendment 2 30 May 2008 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-79:2002. (EL-002)
AS/NZS 60335.2.86:2002 Particular requirementsParticular requirements for appliances for electric fishing machines (IEC 60335-2-86 Ed. 2.0 (English 2002)) 22pp
Amendment 1 15 October 2004 Amendment 2 25 November 2005 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-86:2002. (EL-002)
AS/NZS 60335.2.73:2005 Particular requirements for fixed immersion heaters (IEC 60335-2-73 Ed 2.0,IDT) 15pp
Amendment 1 20 October 2006 This Standard deals with the safety of fixed electric immersion heaters for household and similar purposes that are intended for installation in a water tank for heating water to a temperature below its boiling point. The rated voltage is not more than 250 V for singlephase appliances and 480 V for other appliances. (EL-002)
AS/NZS 60335.2.80:2004 Particular requirements for fans (IEC 60335-2-80 Ed. 2.1 (English 2004)) 15pp
Deals with the safety of electric fans, their rated voltage being not more that 250V for single-phase and 480V for other appliances, intended for household and similar purposes. Appliances intended for use in
AS/NZS 60335.2.87:2002 Particular requirementsParticular requirements for electric animal-stunning equipment (IEC 60335-2-87 Ed. 2.0 (English 2002)) 23pp
Amendment 1 30 November 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with
244
AS/NZS 60335.2.89:2002 Particular requirementsParticular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor (IEC 60335-2-89 Ed. 1.0 (Bilingual 2002)) 39pp
Amendment 1 24 January 2003 Amendment 2 25 November 2005 Amendment 3 30 November 2007 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-89:2002. (EL-002)
AS/NZS 60335.2.95:2005 Particular requirements for drives for vertically moving garage doors for residential use (IEC 60335-2-95 Ed. 2.1 (Bilingual 2005)) 21pp
Deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase and 480 V for other appliances. The hazards associated with the movement of these electrically driven garage doors is included. (EL-002)
AS/NZS 60335.2.103:2007 Particular requirements for drives for gates, doors and windows (IEC 60335-2103: Ed 2, IDT) 23pp
Deals with the safety of electric drives for horizontally and vertically moving gates, doors and windows for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Also covers the hazards associated with the movement of the driven part. (EL-002)
AS/NZS 60335.2.90:2006 Particular requirements for commercial microwave ovens (IEC 60335-2-90 Ed. 3.0 (Bilingual 2006)) 46pp
Deals with the safety of microwave ovens with a cavity door intended for commercial use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances; the safety of combination microwave ovens with a cavity door, the requirements for which are contained in Annex AA; the safety of microwave ovens without a cavity door and with transportation means that are intended for commercial use only, for the heating of food and beverages, the requirements for which are contained in Annex BB. Changes in this edition concern requirements for microwave ovens without a cavity door and with transportation means that are intended for commercial use only for the heating of food and beverages. (EL-002)
AS/NZS 60335.2.96:2002 Particular requirements for flexible sheet heating elements for room heating (IEC 60335-2-96:2002, IDT) 34pp
Amendment 1 31 May 2004 Deals with the safety of flexible sheet heating elements intended to be incorporated into the building to heat the room in which they are located, their rated voltage being not more than 250 V for single-phase installations and 480 V for other installations. (EL-002)
AS/NZS 60335.2.105:2006 Particular requirements for multifunctional shower cabinets (IEC 60335-2-105 Ed. 1.0 (Bilingual 2004)) 11pp
Amendment 1 30 May 2008 Deals with the safety of electric multifunctional shower cabinets for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard however, in general, does not take into accountthe use of appliances by young children or infirm persons without supervision or playing with the appliance by young children. (EL-002)
AS/NZS 60335.2.97:2007 Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97 Ed 2.1, IDT) 13pp
Deals with the safety of electric drives for rolling equipment such as shutters, blinds and awnings, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. (EL-002)
AS/NZS 60335.2.106:2007 Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings (IEC 60335-2-106 Ed. 1.0 (Bilingual 2007)) 33pp
Deals with the safety of:heated carpets and similar appliances;heating units to heat the room in which they are located and that are intended to be installed directly under a floor covering that is itself intended to be removable; their rated voltage being not more than 250 V for single-phase installations and 480 V for other installations. (EL-002)
AS/NZS 60335.2.91:2008 Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers (IEC 60335-2-91 Ed 3, MOD) 43pp
(EL-002)
AS/NZS 60335.2.98:2005 Particular requirements for humidifiers (IEC 60335-2-98 Ed 2.1, IDT) 17pp
This Standard deals with the safety of electric humidifiers for household and similar use, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances. Examples of appliances that are within the scope of this standard are appliances that atomize water; appliances that evaporate water by heating and appliances that blow air through a moist element. (EL-002)
AS/NZS 60335.2.91:2002 Particular requirementsParticular requirements for walk-behind and handheld lawn trimmers and lawn edge trimmers (IEC 60335-2-91 Ed. 2.0 (English 2002)) 29pp Available Superseded
Amendment 1 14 November 2003 Amendment 2 20 October 2006 Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-91:2002. (EL-002)
AS/NZS 60335.2.108:2008 Particular requirements for electrolysers (IEC 60335-2-108 Ed 1, MOD) 12pp
Deals with the safety of electrolysers that produce low viscosity, ionized liquids intended for use as detergent free wash water in appliances for household and similar purposes and which conform with the standards applicable to such appliances. It applies to electrolysers tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage being not more than 250 V. (EL-002)
AS/NZS 60335.2.100:2003 Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums 18pp
Deals with the safety of hand-held mains-operated electrical garden vacuums and garden blower/vacuums with or without shredding means and garden blowers for use at and around the home or for similar purposes, their rated voltage being not more than 250 V single phase. (EL-002)
AS 603552004 An appraisal of the problems of accelerated testing for atmospheric corrosion (IEC/TR 60355 Ed. 1.0 (Bilingual 1971)) 7pp
Provides background information on accelerated tests for atmospheric corrosion. (EL-026)
AS/NZS 60335.2.92:2003 Particular requirements for pedestriancontrolled mains-operated lawn scarifiers and aerators (IEC 60335-2-92 Ed. 2.0 (English 2002)) 47pp
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-92:2002. (EL-002)
AS/NZS 60335.2.101:2002 Particular requirementsParticular requirements for vaporizers (IEC 60335-2-101 Ed. 1.0 (Bilingual 2002)) 15pp
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-101:2002. (EL-002)
AS 60417 Graphical symbols for use on equipment AS 60417.12004 Overview and application (IEC 60417-1 Ed. 3.0 (Bilingual 2002)) 176pp
Provides a presentation of the graphical symbols with the corresponding descriptions in numerical order which does not necessarily represent any functional grouping. It is complemented by an alphabetical index and a graphical survey of the symbols. Additional information is provided to the user by classifications to form and function, and the examples of application. (TE-013)
AS/NZS 60335.2.94:2008 Particular requirements for scissors type grass shears (IEC 60335-2-94 Ed 3, MOD) 39pp
Deals with the safety of electric powered hand-held scissors type grass shears with a maximum cutting width of 200 mm designed primarily for cutting grass, their rated voltage being not more than 250 V for a.c. or 50 V d.c. (EL-002)
AS/NZS 60335.2.102:2004 Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections (IEC 60335-2-102 Ed. 1.0 (Bilingual 2004)) 11pp
Amendment 1 30 May 2008 Deals with the safety of gas, oil and solid-fuel burning appliances having electrical connections, for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. The electrical safety and some other safety aspects of these appliances are also covered. All safety aspects are covered when the appliance also complies with the relevant standard for the fuel-burning appliance. If the appliance incorporates electric-heating sources, it also has to comply with the relevant part 2 of IEC 60335. Examples of appliances within the scope of this standard are: cen-
AS/NZS 60335.2.94:2002 Particular requirementsParticular requirements for scissor type grass shears (IEC 60335-2-94 Ed. 2.0 (English 2002)) 21pp Available Superseded
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with
AS 60417.2.12004 General application (IEC 60417-2 Ed. 1.0 (Bilingual 1998), IEC 60417-2 Amd.1 Ed. 1.0 (Bilingual 2000), IEC 60417-2 Amd.2 Ed. 1.0 (Bilingual 2002)) 69pp
Provides a presentation of the full size symbol originals for general application for reproduction purposes in numerical order. (TE-013)
245
AS 60417.2.22004
AS 60417.2.22004 Audiovisual equipment (IEC 60417-2 Ed. 1.0 (Bilingual 1998), IEC 60417-2 Amd.1 Ed. 1.0 (Bilingual 2000), IEC 60417-2 Amd.2 Ed. 1.0 (Bilingual 2002)) 109pp
Contains a presentation of the full size symbol originals for audiovisual equipment for reproduction purposes in numerical order. (TE-013)
AS IEC 604332007 Insulators for overhead lines with a nominal voltage above 1000 VCeramic insulators for a.c. systemsCharacteristics of insulator units of the long rod type (IEC 60433 Ed. 3.0 (English 1998)) 5pp
Specifies characteristics for long rod insulators for use on overhead lines. (EL-010)
AS/NZS 60598 Luminaires AS/NZS 60598.1:2003 General requirements and tests (IEC 60598-1 Ed. 6.0 (Bilingual 2003)) 177pp
Specifies general and safety requirements for luminaires with related tests for mechanical and electrical constructions. This document is reproduced fromthe Lumex WG draft Edition 6 of IEC 60598-1 and varied for Australian/New Zealand conditions. (EL-041)
AS 60417.2.32004 Telephone and telecommunications (IEC 60417-2 Ed. 1.0 (Bilingual 1998), IEC 60417-2 Amd.1 Ed. 1.0 (Bilingual 2000), IEC 60417-2 Amd.2 Ed. 1.0 (Bilingual 2002)) 33pp
Provides a presentation of the full size symbol originals for telephone and telecommunicationsfor reproduction purposes in numerical order. (TE-013)
AS IEC 604372005 Radio interference test on high-voltage insulators (IEC 60437 Ed. 2.0 (Bilingual 1997)) 7pp
Provides a method of test of the level of radio interference of insulators for use on overhead lines. (EL-010)
AS 60417.2.42004 Maritime navigation (IEC 60417-2 Ed. 1.0 (Bilingual 1998), IEC 60417-2 Amd.1 Ed. 1.0 (Bilingual 2000), IEC 60417-2 Amd.2 Ed. 1.0 (Bilingual 2002)) 11pp
Provides a presentation of the full size symbol originals for maritime navigation for reproduction purposes in numerical order. (TE-013)
AS 604702001 High-voltage alternating current contactors and contactor-based motor-starters (IEC 60470 Ed. 2.0 (Bilingual 2000)) 72pp
Applies to a.c. contactors and/or contactor-based motorstarters designed for indoor installation and operation at frequencies up to and including 60 Hz on systems having voltages above 1000 V but not exceeding 12000 V. In particular applies to three-pole contactors and starters for use in three-phase systems and single-pole contactors and starters for use in single-phase systems. Contactors and/or starters dealt with in this Standard are not normally designed to interrupt short-circuit currents. This Standard is also applicable to the operating devices of contactors and to their auxiliary equipment. This Standard is identical with and has been reproduced from IEC 60470:2000. (EL-007)
AS/NZS 60598.2.1:1998 Particular requirementsFixed general purpose luminaires (IEC 60598-2-1 Ed. 1.0 (Bilingual 1979), IEC 60598-2-1 Amd.1 Ed. 1.0 (Bilingual 1987)) 3pp
Specifies minimum safety requirements for fixed general purpose luminaires for use with tungsten filament, tubular fluorescent and other discharge lamps with a supply voltages not exceeding 1000 V. This Part is to be read in conjunction with AS/NZS 60598.1. This Standard is technically equivalent to and has been reproduced from IEC 60598-2-1:1979, IEC 60598-21:1979/Amd. 1:1987. (EL-041)
AS 60417.2.52004 Home electric appliances (IEC 60417-2 Ed. 1.0 (Bilingual 1998), IEC 60417-2 Amd.1 Ed. 1.0 (Bilingual 2000), IEC 60417-2 Amd.2 Ed. 1.0 (Bilingual 2002)) 36pp
Provides a presentation of the full size symbol originals for home electric appliances for reproduction purposes in numerical order (TE-013)
AS/NZS 60479 Effects of current on human beings and livestock AS/NZS 60479.1:2002 General aspects (IEC/TS 60479-1 Ed. 3.0 (Bilingual 1994)) 32pp
Provides basic guidance on the general aspects of the effects of electrical currents on persons and livestock for the establishment of electrical safety requirements. This Standard has been reproduced from and is technically identical with IEC 60479-1:1994. (EL-001)
AS 60417.2.62004 Medical equipment (IEC 60417-2 Ed. 1.0 (Bilingual 1998), IEC 60417-2 Amd.1 Ed. 1.0 (Bilingual 2000), IEC 60417-2 Amd.2 Ed. 1.0 (Bilingual 2002)) 78pp
Provides a presentation of the full size symbol originals for medical equipmentfor reproduction purposes in numerical order. (TE-013)
AS/NZS 60598.2.4:2005 Particular requirementsPortable general purpose luminaires (IEC60598-2-4, Ed. 2.0 (1997) MOD) 4pp
Amendment 1 13 November 2007 Specifies minimum safety requirements for portable general purpose luminaires, other than handlamps and portable child appealing luminaires, for use on supply voltages not exceeding 250V. (EL-041)
AS 60417.2.72004 Safety aspects (IEC 60417-2 Ed. 1.0 (Bilingual 1998), IEC 60417-2 Amd.1 Ed. 1.0 (Bilingual 2000), IEC 60417-2 Amd.2 Ed. 1.0 (Bilingual 2002)) 10pp
Provides a presentation of the full size symbol originals for safety aspects for reproduction purposes in numerical order. (TE-013)
AS/NZS 60479.2:2002 Special aspects (IEC/TR 60479-2 Ed. 2.0 (Bilingual 1987)) 22pp
Provides basic guidance on the special aspects of the effects of electrical currents on persons for the establishment of electrical safety requirements. This Standard has been reproduced from and is technically identical with IEC 60479-2:1987. (EL-001)
AS/NZS 60432 Incandescent lampsSafety specifications AS/NZS 60432.1:2007 Tungsten filament lamps for domestic and similar general lighting purposes (IEC 60432-1 Ed. 2.1 (English 2005)) 39pp
Specifies safety requirements for tungsten filament incandescent lamps for general lighting service. (EL-041)
AS/NZS 60479.3:2002 Effects of currents passing through the body of livestock (IEC/TS 60479-3 Ed. 1.0 (Bilingual 1998)) 10pp
Provides basic guidance on the general aspects of the effects of electrical currents on livestock for the establishment of electrical safety requirements. This Standard has been reproduced from and is technically identical with IEC 60479-3:1998. (EL-001)
AS/NZS 60598.2.6:1998 Particular requirementsLuminaires with built-in transformers or convertors for filament lamps (IEC 60598-2-6 Ed. 2.0 (Bilingual 1994), IEC 60598-2-6 Amd.1 Ed. 2.0 (Bilingual 1996)) 10pp
Specifies minimum safety requirements for luminaires with built-in transformers for filament lamps with supply voltages and output voltages not exceeding 1000 V. This Part is to be read in conjunction with AS/NZS 60598.1:1998. This Standard is technically equivalent to and has been reproduced from IEC 60598-2-6:1994 and IEC 60598-2-6:1994/Amd. 1:1996. (EL-041)
AS 605292004 Degrees of protection provided by enclosures (IP Code) (IEC 60529 Ed. 2.1 (Bilingual 2001)) 40pp
Specifies an alphanumeric code for classifying the degrees of protection provided by enclosures for electrical equipment rated up to 72.5 kV. It covers protection of persons against access to hazardous parts and of equipment against ingress of solid foreign objects, dust, and harmful quantities of water. Tests, access, probes and object probes and other test equipment are specified. It is reproduced from IEC 60529 Ed 2.1:2001. (EL-026)
AS/NZS 60432.2:2007 Tungsten-halogen lamps for domestic and similar general lighting purposes (IEC 60432-2 Ed. 2.1 (English 2005)) 9pp
Specifies safety requirements for tungsten-halogen incandescent lamps that are new and not covered by AS/NZS 60432.1. (EL-041)
AS/NZS 60598.2.7:2005 Particular requirementsPortable luminaires for garden use (IEC60598-2-7, Ed. 1.0 (1982) MOD) 4pp
Specifies particular requirements for portable luminaires for garden use (EL-041)
AS/NZS 60432.3:2007 Tungsten-halogen lamps (non-vehicle) (IEC 60432-3 Ed. 1.1 (Bilingual 2005)) 23pp
Specifies requirements for tungsten-halogen lamps for photography, projectors, floodlighting, stage lighting and other general purposes. (EL-041)
AS/NZS 60598.2.8:2002 Particular requirementsHandlamps (IEC 60598-2-8 Ed. 2.1 (Bilingual 2001)) 11pp
Specifies requirements for handlamps and similar portable luminaires for use with tungsten filament and tubular fluorescent lamps on supply voltage up to 250 V. This Standard is reproduced from IEC 60598-28:2001 and has been modified for Australian/New Zealand conditions. (EL-041)
246
AS/NZS 60598.2.23:2002 Particular requirementsExtra low voltage lighting systems for filament lamps (IEC 60598.2.23:1996, MOD) 7pp
Specifies requirements for extra low voltage lighting systems for filament lamps intended for ordinary interior use on supply voltages up to 1000 V. This Stanadrd is based on IEC 60598.2.23. (EL-041)
AS/NZS 60695.2.10:2001 Glowing/hot wire based test methods Glow-wire apparatus and common test procedure (IEC 60695-2-10 Ed. 1.0 (Bilingual 2000)) 11pp
Specifies a glow-wire test to simulate the effect of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. Technically equivalent to and reproduced from IEC 60695-2-10:2000. (EL-002)
AS/NZS 60598.2.9:2006 Particular requirementsPhoto and film luminaires (non-professional)(IEC605982-9, Ed. 2.0 (1987) MOD) 8pp
Specifies particular requirements for photo and film luminaires. (EL-041)
AS/NZS 60598.2.25:2001 Particular requirementsLuminaires for use in clinical areas of hospitals and health care buildings (IEC 60598.2.25:1994, MOD) 12pp
Specifies requirements for luminaires for use with tungsten filament, fluorescent and other discharge lamps in supply voltages up to 1000V for use in clinical areas, where medical treatment, examination and medical care takes place in hospitals and health care buildings. It does not apply to medical electrical equipment containing a light source as defined in Clause 2.2.15 of IEC 60601. (EL-041)
AS/NZS 60598.2.10:1998 Particular requirementsPortable childappealing luminaires (IEC 60598-2-10 Ed. 1.0 (Bilingual 1987), IEC 60598-2-10 Amd.1 Ed. 1.0 (Bilingual 1990), IEC 60598-2-10 Amd.2 Ed. 1.0 (Bilingual 1995)) 5pp
Specifies minimum safety requirements for portable child-appealing luminaires for use with tungsten filament lamps with supply voltages not exceeding 24 V. This Part is to be read in conjunction with AS/NZS 60598.1:1998. This Standard is technically equivalent to and has been reproduced from IEC 60598-210:1987, IEC 60598-2-10:1987/Amd. 1:1990 and IEC 60598-2-10:1987/Amd. 2:1995. (EL-041)
AS/NZS 60695.2.11:2001 Glowing/hot wire based test methods Glow-wire flammability test method for end-products (IEC 60695-2-11 Ed. 1.0 (Bilingual 2000)) 7pp
Amendment 1 10 September 2001 Specifies the details of the glow-wire test when applied to end-products such as electrotechnical equipment, its subassemblies, and components for fire hazard testing. Technically equivalent to and reproduced from IEC 60695-2-11:2000. (EL-002)
AS IEC 60645 ElectroacousticsAudiological equipment AS IEC 60645.12002 Pure-tone audiometers (IEC 60645-1:2001, MOD) 28pp
Specifies general requirements for audiometers and particular requirements for pure-tone audiometers designed for use in determining hearing threshold levels, in comparison with standard reference threshold levels by means of psychoacoustic test methods. This Standard is a modified adoption of, and has been reproduced from, IEC 60645-1:2001. (AV-003)
AS/NZS 60695.2.12:2001 Glowing/hot wire based test methods Glow-wire flammability test method for materials (IEC 60695-2-12 Ed. 1.0 (Bilingual 2000)) 4pp
Specifies the details of the glow-wire test when applied to specimens of solid insulating materials or other solid combustible materials for flammability testing. Technically equivalent to and reproduced from IEC 60695-2-12:2000. (EL-002)
AS/NZS 60598.2.17:2006 Particular requirementsLuminaires for stage lighting, television, film and photographic studios (outdoor and indoor)(IEC60598.2.17, Ed. 1.0 (1984) MOD) 5pp
Specifies particular requirements for luminaires for stage and photographic use. (EL-041)
AS IEC 60645.22002 Equipment for speech audiometry (IEC 60645-2 Ed. 1.0 (Bilingual 1993)) 15pp
Specifies requirements for audiometers or parts thereof designed to provide a means of presenting speech sounds to a subject in a standardized manner. This Standard is identical with and has been reproduced from IEC 60645-2:1993. (AV-003)
AS/NZS 60598.2.18:1998 Particular requirementsLuminaires for swimming pools and similar applications (IEC 60598-2-18 Ed. 2.0 (Bilingual 1993)) 7pp
Specifies minimum safety requirements for fixed luminaires intended for use in water, or in contact with water (e.g. in swimming pools, fountains, garden pools and the like), and for use with tungsten filament lamps. This Part is to be read in conjunction with AS/NZS 60598.1:1998. This Standard is technically equivalent to and has been reproduced from IEC 60598-2-18:1993. (EL-041)
AS/NZS 60695.2.13:2001 Glowing/hot wire based test methods Glow-wire ignitability test method for materials (IEC 60695-2-13 Ed. 1.0 (Bilingual 2000)) 4pp
Specifies the details of the glow-wire test when applied to specimens of solid insulating materials or other solid combustible materials for ignitability testing. Identical to and reproduced from IEC 60695-213:2000. (EL-002)
AS IEC 60645.32002 Auditory test signals of short duration for audiometric and neuro-otological purposes (IEC 60645-3 Ed. 1.0 (Bilingual 1994)) 6pp
Specifies a means of describing the physical characteristics of audiometric test and reference signals of short duration and methods for their measurement. This Standard is identical with and has been reproduced from IEC 60645-3:1994. (AV-003)
AS 60695.42006 Terminology concerning fire tests for electrotechnical products (IEC 60695-4 Ed. 3.0 (Bilingual 2005)) 15pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS/NZS 60598.2.19:2001 Particular requirementsAir handling luminaires (Safety requirements) (IEC 60598.2.19:1981, MOD) 8pp
Specifies safety requirements for air-handling luminaires for use with a ventilation duct or ventilated space, for use with tubular fluorescent lamps on supply voltages up to 1000V. It is reproduced from IEC 60598.2.19:1981 including Amendments 1 and 2 and has been modified for Australian/New Zealand conditions. (EL-041)
AS IEC 60645.42002 Equipment for extended high-frequency audiometry (IEC 60645-4 Ed. 1.0 (Bilingual 1994)) 6pp
Specifies requirements for audiometric equipment designed for use in pure tone audiometry in the frequency range from 8000 Hz to 16000 Hz. This Standard is identical with and has been reproduced from IEC 60645-4:1994. (AV-003)
AS 60695.5.12006 Corrosion damage effects of fire effluent General guidance (IEC 60695-5-1 Ed. 2.0 (Bilingual 2002)) 12pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS/NZS 60695 Fire hazard testing AS/NZS 60695.1.1:2001 Guidance for assessing the fire hazard of electrotechnical productsGeneral guidelines (IEC 60695-1-1:1999, IDT) 34pp
Provides guidance for assessing the fire hazard of electrotechnical products and for the resulting development of fire hazard testing as related directly to harm to people, animals or property. Products, as defined in this Standard, relate to materials, components or complete end use products. This Standard is technically equivalent to and reproduced from IEC 60695-11:1999. (EL-002)
AS 60695.5.22006 Corrosion damage effects of fire effluent Summary and relevance of test methods (IEC/TS 60695-5-2 Ed. 2.0 (Bilingual 2002)) 23pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS/NZS 60598.2.22:2005 Particular requirementsLuminaires for emergency lighting (IEC60598-2-22, Ed. 3.1(2002) MOD) 22pp
Specifies particular requirements for luminaires for emergency lighting. This Standard is reproduced from IEC 60598-2-22, Ed. 3.1(2002) and modified to suit national conditions. (EL-041)
AS 60695.1.402006 Guidance for assessing the fire hazard of electrotechnical productsInsulating liquids (IEC/TS 60695-1-40 Ed. 1.0 (Bilingual 2002)) 19pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS 60695.5.32006 Corrosion damage effects of fire effluent Leakage-current and metal-loss test method (IEC/TS 60695-5-3 Ed. 1.0 (Bilingual 2003)) 21pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
247
AS 60695.6.12006
AS 60695.6.12006 Smoke obscurationGeneral guidance (IEC 60695-6-1 Ed. 2.0 (Bilingual 2005)) 24pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053) technical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS 60695.8.12006 Heat releaseGeneral guidance (IEC 60695-8-1 Ed. 1.0 (Bilingual 2001)) 9pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS/NZS 60695.11.4:2004 Test flames50 W flamesApparatus and confirmational test methods (IEC/TS 60695-11-4 Ed. 2.0 (Bilingual 2004)) 23pp
Provides detailed requirements for the production of a 50 W nominal, pre-mixed type test flame, with an overall height of approximately 20 mm. Three methods, A,B and C, are given: flame A is produced by methane; flame B and C are capable of being produced with either methane or propane. Has the status of a Basic Safety Publication in accordance with IEC Guide 104. (EL-002)
AS 60695.6.22006 Smoke obscurationSummary and relevance of test methods (IEC/TS 60695-6-2 Ed. 2.0 (Bilingual 2005)) 24pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS 60695.8.22006 Heat releaseSummary and relevance of test methods (IEC/TS 60695-8-2 Ed. 1.0 (Bilingual 2000)) 5pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS 60695.6.302006 Guidance and test methods on the assessment of obscuration hazard of vision caused by smoke opacity from electrotechnical products involved in firesSmall scale static methodDetermination of smoke opacityDescription of the apparatus (IEC/TS 60695-6-30 Ed. 1.0 (Bilingual 1996)) 28pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS/NZS 60695.11.5:2005 Test flamesNeedle-flame test method Apparatus, confirmatory test arrangement and guidance (IEC 60695-11-5 Ed. 1.0 (Bilingual 2004)) 14pp
Specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess by a simulation technique the fire hazard. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. (EL-002)
AS 60695.9.12006 Surface spread of flameGeneral guidance (IEC 60695-9-1 Ed. 2.0 (Bilingual 2005)) 9pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS 60695.6.312006 Smoke obscurationSmall-scale static testMaterials (IEC/TS 60695-6-31 Ed. 1.0 (Bilingual 1999)) 12pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS 60695.9.22006 Surface spread of flameSummary and relevance of test methods (IEC/TS 60695-9-2 Ed. 2.0 (Bilingual 2005)) 21pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS/NZS 60695.11.10:2001 Test flames50 W horizontal and vertical flame test methods (IEC 60695-11-10 Ed. 1.0 (Bilingual 1999)) 20pp
Amendment 1 31 May 2004 Procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other non-metallic materials, exposed to a small-flame ignition source of 50 W nominal power. Identical to and reproduced from IEC 60695-11-10:1999. (EL-002)
AS 60695.7.12006 Toxicity of fire effluentGeneral guidance (IEC 60695-7-1 Ed. 2.0 (Bilingual 2004)) 15pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS/NZS 60695.10.2:2004 Abnormal heatBall pressure test (IEC 60695-10-2 Ed. 2.0 (Bilingual 2003)) 11pp
Amendment 1 7 April 2006 The objective of this Standard is to provide guidance to manufacturers and designers, testing laboratories and similar organizations on the application of the ball pressure test for testing for resistance to heat of nonmetallic materials in order to assess the fire hazard of electrotechnical products. (EL-002)
AS/NZS 60695.11.20:2001 Test flames500 W flame test methods (IEC 60695-11-20 Ed. 1.0 (Bilingual 1999)) 15pp
Amendment 1 31 May 2004 Procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other non-metallic materials, as well as their resistance to burn-through when exposed to a flame ignition source of 500 W nominal power. Identical to and reproduced from IEC 60695-1120:1999. (EL-002)
AS 60695.7.22006 Toxicity of fire effluentSummary and relevance of test methods (IEC/TR 60695-7-2 Ed. 1.0 (Bilingual 2002)) 26pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS 60695.10.32006 Abnormal heatMould stress relief distortion test (IEC 60695-10-3 Ed. 1.0 (Bilingual 2002)) 3pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS 60695.11.212006 Test flames500 W vertical flame test method for tubular polymeric materials (IEC/TS 60695-11-21 Ed. 1.0 (Bilingual 2005)) 9pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS 60695.7.32006 Toxicity of fire effluentUse and interpretation of test results (IEC/TS 60695-7-3 Ed. 2.0 (Bilingual 2004)) 25pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS/NZS 60695.11.2:2004 Test flames1 kW nominal pre-mixed flameApparatus, confirmatory test arrangement and guidance (IEC 60695-11-2 Ed. 1.0 (Bilingual 2003)) 17pp
Gives the detailed requirements for the production of a 1 kW nominal, propane based pre-mixed type test flame. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. Has the status of a basic safety publication in accordance with IEC Guide 104. (EL-002)
AS 60695.11.402006 Test flamesConfirmatory tests Guidance (IEC/TS 60695-11-40 Ed. 1.0 (Bilingual 2002)) 12pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS 60695.7.502006 Toxicity of fire effluentEstimation of toxic potencyApparatus and test method (IEC/TS 60695-7-50 Ed. 1.0 (Bilingual 2002)) 15pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electrotechnical equipment, their parts (including components) and electrical insulating materials. (EL-053)
AS/NZS 60702 Mineral insulated cables and their terminations with a rated voltage not exceeding 750V AS/NZS 60702.1:2005 Cables (IEC 60702-1 Ed. 3.0 (Bilingual 2002)) 19pp
Specifies the requirements for mineral-insulated metal sheathed (MIMS) cables with copper conductors and sheaths, intended for use in electrical installations at working voltages of 500V and 750V. (EL-003)
AS/NZS 60695.11.3:2004 Test flames500 W flamesApparatus and confirmational test methods (IEC/TS 60695-11-3 Ed. 2.0 (Bilingual 2004)) 31pp
Gives the detailed requirements for the production of a nominal 500 W, pre-mixed type test flame. The approximate overall height is 125 mm. Four methods are given: flame A and D may only be produced using methane, flame B may only be produced using propane and flame C may be produced using either methane or propane. Has the status of a basic safety publication in accordance with IEC Guide 104. (EL-002)
AS 60695.7.512006 Toxicity of fire effluentEstimation of toxic potencyCalculation and interpretation of test results (IEC/TS 60695-7-51 Ed. 1.0 (Bilingual 2002)) 8pp
The AS 60695 series of Standards provide guidance and test methods for assessing fire hazards of electro-
6pp
Specifies requirements for terminations for use with mineral-insulated mineral-sheathed (MIMS) cables complying with the requirements of AS/NZS60702.1. (EL-003)
248
AS/NZS 60745.2.13:2006 Particular requirements for chain saws (IEC 60745-2-13 Ed. 2.0 (Bilingual 2006)) 27pp
This standard applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine. This standard does not apply to chain saws for tree service as defined in ISO 11681-2, pole cutters and pruners. (EL-002)
AS 60870 Telecontrol equipment and systems AS 60870.1.11998 General considerationsGeneral principles (IEC/TR 60870-1-1 Ed. 1.0 (Bilingual 1988)) 26pp
Describes the series of Standards applying to telecontrol equipment and systems with coded bit serial data transmission for monitoring and control of geographically widespread processes. It is one of the series of Standards applicable to telecontrol equipment systems. This standard is identical with and has been reproduced from IEC 60870-1-1:1988. (EL-050)
AS/NZS 60745 Hand-held motor-operated electric tools Safety AS/NZS 60745.1:2003 General requirements (IEC 60745-1 Ed. 3.0 (English 2001))
94pp
Amendment 1 14 November 2003 Amendment 2 31 May 2004 Amendment 3 30 November 2007 Specifies general safety requirements for hand-held motor-operated electric tools. It is a base Standard which, when combined with a particular Standard in the AS/NZS 60745 series, becomes a complete Standard for the particular hand-held motor-operated tool. This Standard is technically equivalent to and has been reproduced from IEC 60745-1:2001. (EL-002)
13pp
(EL-002)
AS/NZS 60745.2.15:2006 Particular requirements for hedge trimmers (IEC 60745-2-15 Ed. 2.0 (Bilingual 2006)) 22pp
Applies to hedge trimmers which are designed for use by one operator for trimming hedges and bushes, utilizing one or more linear reciprocating cutter blades. This standard is not applicable to hedge trimmers with a rotating blade. (EL-002)
AS 60870.1.21998 General considerationsGuide for specifications (IEC 60870-1-2 Ed. 1.0 (Bilingual 1989)) 15pp
Presents guidelines for establishing specifications for telecontrol systems and equipment following the other IEC Standards on telecontrol systems and other relevant international Standards and recommendations such as ITU-T recommendations. It also facilitates the comparison of equipment of different manufacturers. It is one of a series of Standards applicable to telecontrol equipment systems. This Standard is identical with and has been reproduced from IEC 60870-12:1989. (EL-050)
AS/NZS 60745.2.1:2003 Particular requirements for drills and impact drills 18pp
(EL-002)
AS/NZS 60745.2.3:2006 Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3 Ed. 2.0 (Bilingual 2006)) 30pp
Applies to grinders, with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity, polishers and disk-type sanders, including angle, straight and vertical with a rated capacity not exceeding 230 mm. Does not apply to random-orbit polishers and random-orbit sanders. These are covered by IEC 60745-2-4. (EL-002)
AS 60870.1.31998 General considerationsGlossary (IEC/TR 60870-1-3 Ed. 2.0 (Bilingual 1997)) 33pp
Specifies those terms which are specifically relevant to telecontrol techniques as well as other terms which are necessary for the understanding of telecontrol standards. It is one of a series of Standards applicable to telecontrol equipment systems. This Standard is identical with and has been reproduced from IEC 60870-1-3:1997. (EL-050)
AS/NZS 60745.2.19:2005 Particular requirements for jointers (IEC 60745-2-19 Ed. 1.0 (Bilingual 2005)) 10pp
This Standard deals with jointers for cutting into wood or similar material. (EL-002)
AS/NZS 60745.2.5:2007 Particular requirements for circular saws (IEC 60745-2-5: Ed 4.0, IDT) 41pp
(EL-002)
AS 60870.1.41998 General considerationsBasic aspects of telecontrol data transmission and organization of Standards IEC 60870-5 and IEC 60870-6 (IEC/TR 60870-1-4 Ed. 1.0 (Bilingual 1994)) 23pp
Describes a brief tutorial on transmission techniques, equipment and protocols in view of use in telecontrol systems. It is one of a series of Standards applicable to telecontrol equipment systems. This Standard is identical with and has been reproduced from IEC 60870-14:1994. (EL-050)
AS/NZS 60745.2.5:2003 Particular requirements for circular saws 34pp Available Superseded
(EL-002)
AS IEC 608122008 Analysis techniques for system reliability Procedure for failure mode and effects analysis (FMEA) (IEC 60812 Ed. 2.0 (Bilingual 2006)) 39pp
Adopts IEC 60812 Ed.20. (2006) to describe Failure Mode and Effects Analysis (FMEA) and Failure Mode, Effects and Criticality Analysis (FMECA) and give guidance on their applications, including the basic principles, procedural steps, terms, assumptions, criticality measures and failure modes, with examples. (QR-005)
AS 60870.2.11998 Operating conditionsPower supply and electromagnetic compatibility (IEC 60870-2-1 Ed. 2.0 (Bilingual 1995)) 18pp
Specifies characteristics of power supply to which components of telecontrol, teleprotection, distribution line carrier and distribution automation equipment and systems are connected during normal operation and the EMC minimum requirements, expressed in terms of immunity and emission test levels. It is one of a series of Standards applicable to telecontrol equipment systems. This Standard is identical with and has been reproduced from IEC 60870-2-1:1995. (EL-050)
AS/NZS 60840:2006 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) Test methods and requirements (IEC 60840 Ed. 3.0 (English 2004)) 47pp
Specifies test methods and requirements for electric cables and their accessories for rated volages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) for referencing in Australian/New Zealand Standards for polymeric insulated electric cables covering this voltage range. (EL-003)
AS 60870.31998 Interfaces (electrical characteristics) (IEC 60870-3 Ed. 1.0 (Bilingual 1989)) 30pp
Defines the electrical interface characteristics (e.g. signals, impedances, and the like) which have to be met at the shared boundaries. It is one of a series of Standards applicable to telecontrol equipment systems. This Standard is identical with and has been reproduced from IEC 60870-3:1989. (EL-050)
AS/NZS 60745.2.8:2003 Particular requirementsParticular requirements for shears and nibblers 13pp
(EL-002)
13pp
AS 608492004 Sound systems for emergency purposes (IEC 60849:1998 MOD) 20pp
This Standard is the modified adoption IEC 60849:1998, which applies to sound reinforcement and distribution systems to be used to effect a rapid and orderly mobilization of occupants in an indoor or outdoor area in an emergency situation. It applies to systems using tone signals and to systems with voice announcements for emergency purposes. (FP-002)
(EL-002)
AS 60870.41998 Performance requirements (IEC 60870-4 Ed. 1.0 (Bilingual 1990)) 28pp
Defines those characteristics which affect the performance of telecontrol systems and relates the characteristics to the application and processing functions. It is one of a series of Standards applicable to telecontrol equipment systems. This Standard is identical with and has been reproduced from IEC 608704:1990. (EL-050)
249
AS 60870.5.11998
AS 60870.5.11998 Transmission protocolsTransmission frame formats (IEC 60870-5-1 Ed. 1.0 (Bilingual 1990)) 36pp
Specifies the basic requirements for services to be provided by the link plus physical layers, for telecontrol applications. In particular it specifies Standards on coding, formatting and synchronizing data frames of variable and fixed lengths which meet specified data integrity requirements. It is one of a series of Standards applicable to telecontrol equipment systems. This Standard is identical with and has been reproduced from IEC 60870-5-1:1990. (EL-050) ceeding 10000A. This draft Standard is intended for use in conjunction with IEC60898-1 (which has been prepared as a revision of AS/NZS4989:1997). AnnexZZ lists variations for Australian and New Zealand conditions. (EL-004)
AS 60947 Low-voltage switchgear and controlgear AS 60947.12004 General rules (IEC 60947-1 Ed. 4.0 (English 2004)) 163pp
Specifies general requirements and tests that are common to switchgear and controlgear intended to be connected to circuits, the rated voltage of which does not exceed 1000 V a.c. or 1500 V d.c. This document is technically identical with and reproduced from IEC 60947.1:2004. (EL-006)
AS/NZS 60901:2003 Single-capped fluorescent lamps Performance specifications (IEC 60901 Ed. 2.2 (Bilingual 2001))
191pp
Specifies performance requirements for single capped fluorescent lamps for general lighting service. This Standard is identical to and reproduced from IEC 60901:2001, that includes Amendment 1 and Amendment 2. (EL-041)
AS 60870.5.21998 Transmission protocolsLink transmission procedures (IEC 60870-5-2 Ed. 1.0 (Bilingual 1992)) 44pp
Defines link procedures which are restricted to message transmission sequences operating with size 1 windows. It is one of a series of Standards applicable to telecontrol equipment systems. This Standard is identical with and has been reproduced from IEC 60870-5-2:1992. (EL-050)
AS/NZS 60921:2002 Ballasts for tubular fluorescent lamps Performance requirements (IEC 60921:1988, MOD) 24pp
Specifies performance requirements for ballasts for tubular fluorescent lamps for use in a.c. supplies up to 1000 V. This applies to complete ballasts and their allied components such as reactors, transformers and capacitors. This document should be read in conjunction with general and safety requirements of ballasts covered in AS/NZS 60920. (EL-041)
AS 60870.5.31998 Transmission protocolsGeneral structure of application data (IEC 60870-5-3 Ed. 1.0 (Bilingual 1992)) 18pp
Specifies the rules for structuring application data units in transmission frames of telecontrol systems. It is one of a series of Standards applicable to telecontrol equipment systems. This Standard is identical with and has been reproduced from IEC 60870-5-3:1992. (EL-050)
AS/NZS 60922:1998 Auxiliaries for lampsBallasts for discharge lamps (excluding tubular fluorescent lamps) General and safety requirements (IEC 60922 Ed. 2.0 (Bilingual 1997)) 35pp
Specifies safety requirements for inductive-type ballasts for discharge lamps such as high-pressure mercury vapour, low- and high-pressure sodium vapour and metal halide lamps for use on a.c. supplies up to 1000 V at 50 Hz or 60 Hz. This Standard is identical with and has been reproduced from IEC 60922:1997. (EL-041)
AS 60947.4.12004 Contactors and motor-starters Electromechanical contactors and motorstarters (IEC 60947-4-1 Ed. 2.1 (Bilingual 2002)) 82pp
Specifies requirements and tests for contactors, whose main contacts are intended to be connected to circuits, the rated voltage of which does not exceed 1000Va.c. or 1500Vd.c. Applies to contactors associated with overload or short-circuit protective devices, starters associated with short-circuit and integrated overload protective devices and contactors and starters with their own short-circuit protective devices. Is identical with and reproduced from consolidated Edition 2.1(2002-2) of IEC60947-4-1. (EL-006)
AS 60870.5.41998 Transmission protocolsDefinition and coding of application information elements (IEC 60870-5-4 Ed. 1.0 (Bilingual 1993)) 20pp
Defines Standard declaration rules for application data in telecontrol systems. It is one of a series of Standards applicable to telecontrol equipment systems. This Standard is identical with and has been reproduced from IEC 60870-5-4:1993. (EL-050)
AS/NZS 60923:1998 Auxiliaries for lampsBallasts for discharge lamps (excluding tubular fluorescent lamps) Performance requirements (IEC 60923 Ed. 2.0 (Bilingual 1995)) 22pp
Specifies performance requirements for inductive type ballasts for discharge lamps (such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps). The ballasts are for use on supplies up to 1000 V at 50 Hz or 60 Hz. This Standard is technically equivalent to and has been reproduced from IEC 60923:1995. (EL-041)
AS 60947.4.22004 Contactors and motor-startersA.C. semiconductor motor controllers and starters (IEC 60947-4-2 Ed. 2.1 (Bilingual 2002)) 75pp
Specifies requirements and tests for controllers and starters intended to be connected to circuits, the rated voltage of which does not exceed 1000Va.c. and which uses power semi-conductor switching elements for simple starting and stopping, manoeuvring and controlled running of induction motors. Is identical with and reproduced from consolidation Edition 2.1 (2002-03) of IEC60947-4-2. (EL-006)
AS 60870.5.51998 Transmission protocolsBasic application functions (IEC 60870-5-5 Ed. 1.0 (Bilingual 1995)) 47pp
Defines basic application functions that perform standard procedures for telecontrol systems. It is one of a series of Standards applicable to telecontrol equipment systems. This Standard is identical with and has been reproduced from IEC 60870-5-5:1995. (EL-050)
AS/NZS 60925:2005 D.C. supplied electronic ballasts for tubular fluorescent lampsPerformance requirements (IEC60925, Ed. 1.2 (2001) MOD) 16pp
Provides the lighting industry with performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps up to 250V. (EL-041)
AS/NZS 60898 Electrical accessoriesCircuit-breakers for overcurrent protection for household and similar installations AS/NZS 60898.1:2004 Circuit-breakers for a.c. operation (IEC 60898-1 Ed. 1.2 (2003) MOD) 125pp
Proposes the adoption of IEC60898-1:2003 as a revision of AS/NZS4898:1997. Contains essential safety and associated requirements for a.c. air-break circuitbreakers for operation at 50Hz or 60 Hz, having a rated voltage not exceeding 440 V (between phases), a rated current not exceeding 125A and a rated shortcircuit capacity not exceeding 25,000 A. Annex ZZ lists variations for Australian and New Zealand conditions. (EL-004)
AS/NZS 60927:2005 Auxiliaries for lampsStarting devices (other than glow starters)Performance requirements (IEC60927, Ed.2.2 (2004) MOD) 25pp
Specifies performance requirements for starting devices (other than glow starters). (EL-041)
AS 60947.5.12004 Control circuit devices and switching elementsElectromechanical control circuit devices (IEC 60947-5-1 Ed. 3.0 (Bilingual 2003)) 80pp
Specifies requirements and tests, in addition to those specified in the general rules of AS60947.1, for control circuit devices intended for the controlling, signalling and interlocking of low-voltage switchgear and controlgear. Applies to control circuit devices having a rated voltage not exceeding 1000Va.c. (at a frequency not exceeding 1000Hz) or 600Vd.c. Identical in technical content with and reproduced from Edition3.0 (2003-11) of IEC60947-5-1. (EL-006)
AS/NZS 60928:2000 Auxiliaries for lampsA.C. supplied electronic ballasts for tubular fluorescent lamps General and safety requirements (IEC 60928 Ed. 2.0 (Bilingual 1995)) 30pp
Specifies safety requirements for electronic ballasts for tubular fluorescent lamps for use on a.c. supplies up to 1000 V at 50 or 60 Hz with operating frequencies deviating from the supply frequency. (EL-041)
AS/NZS 60898.2:2004 Circuit-breakers for a.c. and d.c. operation (IEC 60898-2 Ed. 1.1 (2003) MOD) 14pp
Proposes the adoption of IEC60898-2:2003 as a joint Australian/New Zealand Standard. Contains essential safety and associated requirements for single-pole and two-pole circuit-breakers which are suitable for operation with divert current and have a rated d.c. voltage not exceeding 220V for single-pole and 440V for twopole circuit-breakers, a rated current not exceeding 125A and a rated d.c. short-circuit capacity not ex-
AS/NZS 60929:2005 A.C. supplied electronic ballasts for tubular fluorescent lampsPerformance requirements (IEC 60929 Ed. 2.0 (Bilingual 2003)) 142pp
Specifies performance requirements for electronic ballasts for tubular fluorescent lamps for use on a.c. supplies up to 1000V at 50Hz or 60Hz. (EL-041)
AS 60947.5.22004 Control circuit devices and switching elementsProximity switches (IEC 60947-5-2 Ed. 2.2 (Bilingual 2004)) 95pp
Specifies requirements and tests for proximity switches. Applies to self-contained proximity switches with non-analogue output having semi-conductor switching elements intended to be connected to circuits, the rated voltage of which does not exceed 250 V a.c. 50/60 Hz a.c. or 600 V d.c. Is reproduced from Consolidated Edition 2.2 of IEC 60947-5-2, which includes IEC 60947-5-2;1997, its Amendment 1:1997 and its Amendment 2:2003. (EL-006)
AS IEC 609422004 ElectroacousticsSound calibrators (IEC 60942 Ed. 3.0 (Bilingual 2003))
84pp
Specifies the performance requirements for these classes of sound calibrator, laboratory standard (Class LS), Class 1 and Class 2. Identical and reproduced from IEC 60942:2003. (AV-002)
250
AS/NZS 60998.2.1:1998 Particular requirements for connecting devices as separate entities with screwtype clamping units (IEC 60998-2-1 Ed. 1.0 (Bilingual 1990)) 20pp
Specifies requirements for screw-type clamping units primarily suitable for connecting unprepared conductors for use at low voltage. It is to be read in conjunction with AS/NZS 60998-1:1997. This Standard is identical with and reproduced from IEC 60998-21:1990. (EL-004)
AS/NZS 60950 Information technology equipmentSafety AS/NZS 60950.1:2003 General requirements (IEC 60950-1 Ed. 1.0 (Bilingual 2001), IEC 60950-1 Ed. 1.0 Cor.1 (English 2002)) 246pp
Amendment 1 17 May 2006 Amendment 2 5 February 2008 Amendment 3 5 February 2008 Specifies safety requirements for electrically powered (both mains-powered and battery-powered) information technology equipment, including electrical business telecommunications and associated equipment with a rated voltage not exceeding 600 V. (TE-001)
AS 60947.5.72004 Control circuit devices and switching elementsRequirements for proximity devices with analogue output (IEC 60947-5-7 Ed. 1.0 (Bilingual 2003)) 11pp
Specifies requirements additional to AS60947.5.2 for proximity devices with analogue output. Applies to proximity devices with analogue output, consisting of one or more parts, the rated voltage of which does not exceed 250Va.c. or 300Vd.c. Identical in technical content with and reproduced from Edition 1.0 (200306) of IEC 60947-5-7. (EL-006)
AS/NZS 60998.2.2:1998 Particular requirements for connecting devices as separate entities with screwless-type clamping units (IEC 60998-2-2 Ed. 1.0 (Bilingual 1991)) 13pp
Specifies requirements for screwless-type clamping units primarily suitable for connecting unprepared conductors for use at low voltage. It is to be read in conjunction with AS/NZS 60998-1:1997. This Standard is identical with and reproduced from IEC 60998-2-2:1991. (EL-004)
AS/NZS 60968:2001 Self ballasted lamps for general lighting servicesSafety requirements (IEC 60968:1988, MOD) 13pp
Specifies asfety and interchangeability requirements along with test methods and conditions for compliance of tubular fluorescent and other gas discharge lamps. This applies to lamps with built-in means for controlling, starting and stable operation. (EL-041)
AS 60947.6.22004 Multiple function equipmentControl and protective switching devices (or equipment) (CPS) (IEC 60947-6-2 Ed. 2.0 (Bilingual 2002)) 86pp
Specifies requirements and tests for control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated voltage not exceeding 1000 V a.c. or 1500 V d.c. Is identical with and has been reproduced from Edition 2.0 (2002-10) of IEC 60947-6-2. (EL-006)
AS/NZS 60998.2.3:1998 Particular requirements for connecting devices as separate entities with insulation piercing clamping units (IEC 60998-2-3 Ed. 1.0 (Bilingual 1991)) 14pp
Amendment 1 25 September 2001 Specifies requirements for insulation piercing clamping units primarily suitable for connecting insulated unprepared conductors for use at low voltages. It is to be read in conjunction with AS/NZS 60998-1:1997. This Standard is technically equivalent with and reproduced from IEC 60998-2-3:1991. (EL-004)
AS/NZS 60969:2001 Self ballasted lamps for general lighting servicesPerformance requirements (IEC 60969 Ed. 1.0 (Bilingual 1988), IEC 60969 Amd.1 Ed. 1.0 (Bilingual 1991), IEC 60969 Amd.2 Ed. 1.0 (Bilingual 2000)) 7pp
Specifies performance requirements for self ballasted lamps for general lighting services. In addition specifies test methods and conditions of compliances of tubular fluorescent and other gas discharge lamps for domestic and general lighting services. (EL-041)
AS 60947.7.12004 Ancillary equipmentTerminal blocks for copper conductors (IEC 60947-7-1 Ed. 2.0 (Bilingual 2002), IEC 60947-7-1 Ed. 2.0 Cor.1 (Bilingual 2003)) 20pp
Specifies requirements and tests for terminal blocks with screw-type or screwless-type clamping units primarily intended for industrial or similar use and to be fixed to a support to provide electrical and mechanical connection between copper conductors. Is identical with and reproduced from Edition 2.0 (2002-07) of IEC60947-7-1. (EL-006)
AS/NZS 60998.2.4:1998 Particular requirements for twist-on connecting devices (IEC 60998-2-4 Ed. 1.0 (Bilingual 1993)) 19pp
Specifies requirements for twist-on connecting devices having a cross- sectional area of from 0.5 mm2 up to and including 16 mm2 for use at low voltages. It is to be read in conjunction with AS/NZS 609981:1997. This Standard is technically equivalent with and reproduced from IEC 60998-2-4:1993. (EL-004)
AS 60974 Arc welding equipment AS 60974.12006 Welding power sources (IEC 609741:2000, MOD) 86pp
Specifies requirements for arc welding power sources designed for industrial and professional use. (EL-019)
AS/NZS 61000 Electromagnetic compatibility (EMC) AS/NZS 61000.1.1:2000 GeneralApplication and interpretation of fundamental definitions and terms (IEC/TR 61000-1-1 Ed. 1.0 (Bilingual 1992)) 26pp
Specifies the application of fundamental terms contained in the electromagnetic enissions and immunity Standards. This Standard is identical with and has been reproduced from IEC 61000-1-1:1992. (TE-003)
AS 60947.7.22004 Ancillary equipmentProtective conductor terminal blocks for copper conductors (IEC 60947-7-2 Ed. 2.0 (Bilingual 2002)) 14pp
Specifies requirements and tests for protective conductor terminal blocks with PE function up to 120mm2 (250 kcmil) and for protective conductor terminal blocks with PEN function equal to and above 10 mm2 (AWG 8) with screw-type or screwless-type clamping units, primarily intended for industrial applications. (EL-006)
AS 60974.62006 Limited duty portable arc welding and allied process power sources (IEC 609746:2003, MOD) 16pp
Specifies requirements for limited duty arc welding and allied process power sources, which are mainly used by laymen. (EL-019)
AS 60974.112005 Electrode holders (IEC 60974-11 Ed. 2.0 (Bilingual 2004)) 9pp
Specifies requirements for manual metal arc welding electrode holders with electrode up to 10 mm in diameter. (EL-019)
AS 60947.7.32004 Ancillary equipmentSafety requirements for fuse terminal blocks (IEC 60947-7-3 Ed. 1.0 (Bilingual 2002), IEC 60947-7-3 Ed. 1.0 Cor.1 (Bilingual 2003)) 31pp
Specifies requirements and tests for fuse terminal blocks with screw-type or screwless-type clamping units for the connection of rigid (solid or stranded) or flexible copper conductors for the reception of miniature cartridge fuse link. Is identical with IEC60947-73:2002 and includes its Corrigendum 1:2003. (EL-006)
AS/NZS 60990:2002 Methods of measurement of touch current and protective conductor current (IEC 60990 Ed. 2.0 (Bilingual 1999)) 43pp
Defines methods for measuring electric currents flowing through the human body or through the protective conductor. This Standard is identical with, and has been reproduced from, IEC 60990:1999. (TE-001)
AS/NZS 61000.2.2:2003 EnvironmentCompatibility levels for lowfrequency conducted disturbances and signalling in public low-voltage power supply systems (IEC 61000-2-2 Ed. 2.0 (Bilingual 2002)) 24pp
Specifies compatibility levels for low-frequency conducted disturbances and signalling in public lowvoltage power supply systems. This Standard is identical with and has been reproduced from IEC 61000-22:2002. (EL-034)
AS/NZS 60998 Connecting devices for low voltage circuits for household and similar purposes AS/NZS 60998.1:1998 General requirements (IEC 60998-1 Ed. 1.0 (Bilingual 1990)) 26pp
Specifies general requirements for connecting devices for the connection of two or more electrical copper conductors having a cross-sectional area of 0.5 mm2 up to and including 35 mm2 for use at low voltages. This Standard is technically equivalent to and reproduced from IEC 60998-1:1990. (EL-004)
AS/NZS 61000.2.3:1999 EnvironmentDescription of the environmentRadiated and non-networkfrequency-related conducted phenomena (IEC/TR 61000-2-3 Ed. 1.0 (Bilingual 1992)) 63pp
Describes the electromagnetic environment intended as a basis to achieve electromagnetic compatibility in system and equipment design, using test standards and mitigation methods which satisfactorily take account of undesirable effects. The Standard is primarily concerned with characteristics and levels of electromagnetic fields and of non-network-frequency-related conducted emissions from unintentional sources of in-
AS 60947.82005 Control units for built-in thermal protection (PTC) for rotating electrical machines (IEC 60947-8 Ed. 1.0 (Bilingual 2003)) 24pp
Specifies rules for control units, that perform the switching functions in response to thermal detectors in
251
AS/NZS 61000.2.5:1999
terference. It is one of a series of Standards applicable to electromagnetic compatibility. This Standard is identical with and has been reproduced from IEC 61000-2-3:1992. (TE-003)
AS/NZS 61000.3.7:2001 LimitsAssessment of emission limits for fluctuating loads in MV and HV power systems (IEC 61000-3-7:1996, MOD) 36pp
Proposes a set of principles which are intended to be used to determine the requirements for connecting large fluctuating loads (producing flicker) to public power systems. This Standard provides guidance on engineering practices which will ensure service quality for all connected consumers. (EL-034)
AS/NZS 61000.2.5:1999 EnvironmentClassification of electromagnetic environments (IEC/TS 61000-2-5 Ed. 1.0 (Bilingual 1995)) 46pp
Provides a method of classification of electromagnetic environments. The Standard is intended to provide a basic framework upon which other EMC considerations may be based. It is one of a series of Standards applicable to electromagnetic compatibility. This Standard is identical with and has been reproduced from IEC 61000-2-5:1995. (TE-003)
AS/NZS 61000.4.6:2006 Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields (IEC 61000-4-6 Ed. 2.1 (Bilingual 2004)) 44pp
Establishes a common reference for evaluating the functional immunity of electrical and electronic equipment when subjected to conducted disturbances induced by radio-frequency fields. (TE-003)
AS/NZS 61000.2.12:2003 EnvironmentCompatibility levels for lowfrequency conducted disturbances and signalling in public medium-voltage power supply systems (IEC 61000-2-12 Ed. 1.0 (Bilingual 2003)) 22pp
Specifies compatibility levels for low-frequency conducted disturbances and signalling in public mediumvoltage power supply systems. This Standard is identical with and has been reproduced from IEC 61000-212:2003. (EL-034)
AS/NZS 61000.3.11:2002 LimitsLimitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systemsEquipment with rated current less than or equal to 75 A and subject to conditional connection (IEC 61000-3-11 Ed. 1.0 (Bilingual 2000)) 10pp
Specifies the limits of voltage changes, voltage fluctuations and flicker produced by electrical and electronic equipment having a rated input current from 16 A up to and including 75 A. This equipment is intended to be connected to public low-voltage distribution systems having nominal system voltages of between 220 V and 250 V, line-to-neutral at 50 Hz and which is subject to conditional connection. This Standard is identical with and has been reproduced from IEC 61000-3-11:2000. (EL-034)
AS/NZS 61000.4.7:2007 Testing and measurement techniques General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (IEC 61000-4-7 Ed. 2.0 (English 2002), IEC 61000-4-7 Ed. 2.0 Cor.1 (Bilingual 2004)) 30pp
Applies to instrumentation intended for measuring spectral components in the frequency range up to 9 KHz which are superimposed of the fundamental of the power supply systems at 50 Hz (EL-034)
AS/NZS 61000.3.2:2007 LimitsLimits for harmonic current emissions (equipment input current (16 A per phase) (IEC 61000-3-2, Ed. 3.0 (2005) MOD) 22pp
Proposes harmonic requirements for equipment with a current input less than or equal to 16 A intended for connection to an electrical network. (EL-034)
AS/NZS 61000.3.12:2006 LimitsLimits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and 75 A per phase (IEC 61000-3-12 Ed. 1.0 (Bilingual 2004)) 21pp
Specifies the harmonic requirements for equipment with a current input greater than 16 A and less than or equal to 75 A, intended for connection to an electrical network. (EL-034)
AS/NZS 61000.4.8:2002 Testing and measurement techniques Power frequency magnetic field immunity test (IEC 61000-4-8 Ed. 1.1 (Bilingual 2001)) 25pp
To determine the immunity requirements of equipment, only under operational conditions, to magnetic disturbances at power frequency related to residential and commercial locations, industrial installations and power plants and medium voltage and high voltage sub-stations. This Standard is identical with and has been reproduced from IEC 61000-4-8:2001. (TE-003)
AS/NZS 61000.3.3:2006 LimitsLimitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current (16 A per phase and not subject to conditional connection (IEC 61000-3-3, Ed. 1.2(2005) MOD) 20pp
Specifies the limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with a rated input current less than 16 A. (EL-034)
AS/NZS 61000.4.1:2006 Testing and measurement techniques Overview of IEC 61000-4 series (IEC 61000-4-1 Ed. 2.0 (Bilingual 2000)) 10pp
Covers testing and measuring techniques for electric and electronic equipment (apparatus and systems) in its electromagnetic environment. (TE-003)
AS/NZS 61000.4.11:2005 Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests (IEC61000-4-11, Ed.2.0(2004) MOD) 21pp
Specifies immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, short interruptions and voltage variations. (EL-034)
AS/NZS 61000.3.4:2007 LimitsLimitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 75 A (IEC/TS 61000-3-4 Ed. 1.0 (Bilingual 1998)) 11pp
Provides manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical network with limits of emission of harmonic currents in low voltage power supply systems for equipment with rated current greater than 75 A and the methods for ascertaining compliance to them in order to maintain electromagnetic compatibility within the electrical network. (EL-034)
AS/NZS 61000.4.2:2002 Testing and measurement techniques Electrostatic discharge immunity test (IEC 61000-4-2 Ed. 1.2 (Bilingual 2001)) 30pp
Establishes a common and reproducible basis for evaluating the performance of electrical and electronic equipment when subjected to electrostatic discharges. This Standard is identical with and has been reproduced from IEC 61000-4-2:2001 Ed 1.2 B. (TE-003)
AS/NZS 61000.4.13:2006 Testing and measurement techniques Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests (IEC 61000-4-13 Ed. 1.0 (Bilingual 2002)) 22pp
Defines the immunity test methods and range of recommended basic test levels for electrical and electronic equipment with rated current up to 16 A per phase at disturbance frequencies up to and including 2 kHz (for 50 Hz mains) and 2,4 kHz (for 60 Hz mains) for harmonics and interharmonics on low voltage power networks. (EL-034)
AS/NZS 61000.3.5:1998 LimitsLimitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A (IEC/TS 61000-3-5 Ed. 1.0 (Bilingual 1994)) 12pp
Specifies the limitation of voltage fluctuation and flicker in low-voltage supply systems for equipment with a rated input current greater than 16 A. This Standard is identical with and has been reproduced from IEC 61000-3-5:1994. (EL-034)
AS/NZS 61000.4.3:2006 Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3 Ed. 3.0 (Bilingual 2006)) 50pp
Establishes a common reference for evaluating the immunity of electrical and electronic equipment when subjected to radiated, radio-frequency electromagnetic fields. (TE-003)
AS/NZS 61000.4.14:2007 Testing and measurement techniques Voltage fluctuation immunity test (IEC 61000-4-14 Ed. 1.1 (Bilingual 2002)) 11pp
Specifies a common reference for evaluation of the immunity of electrical and electronic equipment when subjected to positive and negative low amplitude voltage fluctuations. (EL-034)
AS/NZS 61000.4.4:2006 Testing and measurement techniques Electrical fast transient/burst immunity test (IEC 61000-4-4 Ed. 2.0 (Bilingual 2004)) 26pp
Establishes a common and reproducible reference for evaluating the immunity of electrical and electronic equipment when subjected to electrical fast transient/bursts on supply, signal, control and earth ports. (TE-003)
AS/NZS 61000.3.6:2001 LimitsAssessment of emission limits for distorting loads in MV and HV power systems (IEC 61000-3-6:1996) (IEC/TR 61000-3-6 Ed. 1.0 (Bilingual 1996)) 58pp
Proposes a set of principles which are intended to be used as the basis for determining the requirements for connecting large distorting loads (producing harmonics and/or interharmonics) to public power systems. This Standard provides guidance on engineering practices which will ensure adequate service quality for all connected consumers. (EL-034)
AS/NZS 61000.4.15:2005 Testing and measurement techniques FlickermeterFunction and design specifications (IEC 61000-4-15 Ed. 1.1 (English 2003)) 21pp
Specifies basic information for the design and the instrumentation of an analogue or digital flicker measuring apparatus. (EL-034)
AS/NZS 61000.4.5:2006 Testing and measurement techniques Surge immunity test (IEC 61000-4-5 Ed. 2.0 (Bilingual 2005)) 42pp
Establishes a common reference for evaluating the immunity of electrical and electronic equipment when subjected to surges. (TE-003)
252
AS/NZS 61008 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) AS/NZS 61008.1:2004 General rules (IEC 61008-1 Ed. 2.1 (2002) MOD) 112pp
Proposes the adoption of IEC61008-1:2002 as a revision of AS/NZS3175:1994. Contains essential safety and associated requirements for residual current operated circuit-breakers for household and similar uses, not incorporating overcurrent protection, for rated voltages not exceeding 440Va.c. and rated currents not exceeding 125A. Annex ZZ lists variations for Australian and New Zealand conditions. (EL-004)
AS/NZS 61046:2001 Auxiliaries for lampsD.C. or A.C. supplied electronic step-down convertors for filament lampsGeneral and safety requirements (IEC 61046 Ed. 2.0 (Bilingual 1993), IEC 61046 Amd.1 Ed. 2.0 (Bilingual 1995)) 43pp
Provides the lighting industry with general and safety requirements for electronic step-down convertors for use on D.C. supplies up to 250 V or A.C. supplies up to 1000 V for use with tungsten-halogen or other filament lamps. It also stipulates the particular requirements for convertors with means of protection against overheating and provides additional requirements for independent SELV D.C. or A.C. supplied electronic step-down convertors. This Standards is an adoption with national modifications of IEC 61046:1993 including Amendment 1:1995. (EL-041)
AS/NZS 61000.4.27:2006 Testing and measurement techniques Unbalance, immunity test (IEC 61000-4-27 Ed. 1.0 (Bilingual 2000)) 14pp
Establishes a reference for evaluating the immunity of electrical and electronic equipment when subjected to unbalanced power supply voltage. (EL-034)
AS/NZS 61009 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) AS/NZS 61009.1:2004 General rules (IEC 61009-1 Ed. 2.1 (2003) MOD) 124pp
Amendment 1 31 July 2007 Proposes the adoption of IEC61009-1:2002 as a revision of AS/NZS61009.1:1999. Contains essential safety and associated requirements for residual current operated circuit-breakers with integral overcurrent protection for household and similar uses, for rated voltages not exceeding 440Va.c. and rated currents not exceeding 125A and short-circuit capacities not exceeding 25000A for operation of 50Hz or 60Hz. AnnexZZ lists variations for Australian and New Zealand conditions. (EL-004)
AS/NZS 61047:2001 Auxiliaries for lampsD.C. or a.c. supplied electronic step-down convertors for filament lampsPerformance requirements (IEC 61047 Ed. 1.0 (Bilingual 1991), IEC 61047 Amd.1 Ed. 1.0 (Bilingual 1996), IEC 61047 Amd.2 Ed. 1.0 (Bilingual 2001)) 12pp
Provides the lighting industry with performance requirements at 50 or 60 Hz for electronic step-down conbertors for use on D.C. supplies up to 250 V or a.c. supplies up to 1000 V with tungsten-halogen or other filament lamps. (EL-041)
AS/NZS 61000.4.30:2007 Testing and measurement techniques Power quality measurement methods (IEC 61000-4-30 Ed. 1.0 (English 2003), IEC 61000-4-30 Ed. 1.0 Cor.1 (Bilingual 2006)) 39pp
Specifies the methods for measurement and interpretation of results for power quality parameters in 50/60 Hz a.c. power supply systems. (EL-034)
AS/NZS 61000.4.34:2007 Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase (IEC 61000-4-34, Ed. 1.0 (2005) MOD) 24pp
Provides a common reference for evaluating the immunity of electrical and electronic equipment for rated input current exceeding 16 A per phase, when subjected to voltage dips, short interruptions and voltage variations. (EL-034)
AS/NZS 61048:2002 Auxiliaries for lampsCapacitors for use in tubular fluorescent and other discharge lamp circuitsGeneral safety requirements (IEC 61048 Ed. 1.0 (Bilingual 1991), IEC 61048 Amd.1 Ed. 1.0 (Bilingual 1995), IEC 61048 Amd.2 Ed. 1.0 (Bilingual 1999)) 30pp
Specifies the general and safety requirement for capacitors up to 2.5 kVAR having a rated voltage up to 1000 V intended for discharge lamp circuits operating at 50/60 Hz. This Standard is reproduced from IEC 61048 and varied for Australian/New Zealand conditions. (EL-041)
AS 61010 Safety requirements for electrical equipment for measurement, control and laboratory use AS 61010.12003 General requirements (IEC 61010-1:2001, MOD) 103pp
Specifies general safety requirements for electrical test, measuring, control and laboratory equipment used in professional, educational and industrial processes. (EL-049)
AS/NZS 61049:2002 Auxiliaries for lampsCapacitors for use in tubular fluorescent and other discharge lamp circuitsPerformance requirements (IEC 61049 Ed. 1.0 (Bilingual 1991)) 9pp
Specifies performance requirements for capacitors up to 2.5 kVAR rated up to 1000 V a.c. intended for use in discharge lamp circuits at 50/60 Hz. This Standard is identical with and reproduced from IEC 61049. (EL-041)
AS/NZS 61000.6.1:2006 Generic standardsImmunity for residential, commercial and light-industrial environments (IEC 61000-6-1 Ed. 2.0 (Bilingual 2005)) 11pp
Defines the immunity test requirements for apparatus specified in the scope in relation to continuous and transient, conducted and radiated disturbances including electrostatic discharges. (TE-003)
AS 61010.2.0322004 Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (IEC 61010-2-032 Ed. 2.0 (Bilingual 2002)) 15pp
Specifies particular requirements for hand-held current sensors for electrical test and measurement. This Standard is reproduced from IEC61010-2-032:2002. (EL-049)
AS/NZS 61000.6.2:2006 General standardsImmunity for industrial environments (IEC 61000-6-2 Ed. 2.0 (Bilingual 2005)) 10pp
Describes immunity test requirements for apparatus defined in the scope in relation to continuous and transient, conducted and radiated disturbances, including electrostatic discharges. (TE-003)
AS/NZS 61050:1998 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) General and safety requirements (IEC 61050 Ed. 1.0 (Bilingual 1991), IEC 61050 Amd.1 Ed. 1.0 (Bilingual 1994), IEC 61050 Ed. 1.0 Cor.1 (Bilingual 1992)) 34pp
Specifies general and safety requirements for single-phase transformers with separate input and output windings, for use on an a.c. supply up to 1000 V at 50/60 Hz and having a no-load output voltage exceeding 1000 V but not exceeding 10 000 V and intended for the supply of cold cathode lighting for electric advertising signs, light signals and similar purposes. This Standard is identical with and has been reproduced from IEC 1050:1991, including Corrigendum 1:1992 and Amendment 1:1994. (EL-041)
AS 61010.0312004 Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC61010-031:2002 MOD) 54pp
Specifies safety requirements for hand-held probe assemblies for electrical measurement and test. This Standard is reproduced from IEC61010-031 and varied to suit national conditions. (EL-049)
AS/NZS 61000.6.3:2007 Generic standardsEmission standard for residential, commercial and lightindustrial environments (IEC 61000-6-3 Ed. 2.0 (English 2006)) 10pp
This Standard applies to apparatus intended to be connected to a power network supplied from a high or medium voltage transformer dedicated to the supply of an installation feeding manufacturing or similar plant, and intended to operate in or in proximity to industrial locations. This Standard applies also to apparatus, which is battery operated and intended to be used in industrial locations. (TE-003)
AS/NZS 61058 Switches for appliances AS/NZS 61058.1:2008 General requirements (IEC 61058-1, Ed. 3.1 (2000), MOD) 147pp
Specifies essential safety requirements for switches intended for use in, on or with appliances and other equipment for household and similar use. The Standard is modified and reproduced from IEC 61058-1 Ed 3.1 (EL-004)
AS IEC 610142004 Programmes for reliability growth (IEC 61014 Ed. 2.0 (Bilingual 2003))
38pp
Provides requirements and guidelines for the exposure and removal of weaknesses in hardware and software for the purpose of reliability growth. It is identical with, and has been reproduced from IEC 61014:2003. (QR-005)
AS IEC 610252008 Fault tree analysis (FTA) (IEC 61025 Ed. 2.0 (Bilingual 2006))
43pp
AS/NZS 61000.6.4:2007 Generic standardsEmission standard for industrial environments (IEC 61000-6-4 Ed. 2.0 (English 2006)) 7pp
This Standard applies to apparatus intended to be connected to a power network supplied from a high or medium voltage transformer dedicated to the supply
Adopts IEC 61025, Ed. 2.0 (2006) to describe fault tree analysis and provides guidance on its application to reliability modelling. (QR-005)
AS IEC 610782008 Analysis techniques for system reliability Reliability block diagram and Boolean methods (IEC 61078 Ed. 2.0 (Bilingual 2006)) 29pp
Adopts IEC 61078 Ed. 2.0 (2006) to describe procedures for modelling the dependability of a system using the reliability block diagram technique as a pictorial representation showing the logical connection of components needed for
253
AS 61083.12006
successful operation. Includes guidance on other methods of analysis such as Boolean disjointing methods. (QR-005) standing of the basic means to integrate fuzzy control applications in the Programmable Controller languages according to AS IEC 61131-3. (IT-006)
AS 61083 Instruments and software used for measurement in high-voltage impulse tests AS 61083.12006 Requirements for instruments (IEC 61083-1 Ed. 2.0 (Bilingual 2001)) 28pp
Specifies the measuring characteristics and calibrations required for digital recorders and digital oscilloscopes used for measurements during tests with high impulse voltages and high impulse currents. (EL-007)
AS/NZS 61241.0:2005 General requirements (IEC 61241-0 Ed. 1.0 (Bilingual 2004)) 39pp
Amendment 1 25 July 2005 Specifies general requirements for the design, construction, testing and marking of electrical apparatus protected by any recognized safeguard technique for use in areas where combustible dust may be present in quantities that could lead to a fire or explosion hazard. This Standard is identical with and has been reproduced from IEC 61241-0:2004. (EL-014)
AS IEC 61131.82004 Guidelines for the application and implementation of programming languages (IEC/TR 61131-8 Ed. 1.0 (Bilingual 2000)) 75pp
Adopts IEC 61131-8:2000 which provides guidelines for the implementation of programming languages defined in AS IEC 61131.3 in programmable controller systems and their programming support environments (PSEs) (IT-006)
AS/NZS 61097 Global maritime distress and safety system (GMDSS) AS/NZS 61097.12:2008 Survival craft portable two-way VHF radiotelephone apparatusOperational and performance requirements, methods of testing and required test results (IEC 61097-12, Ed. 1.0 (1996) MOD) 32pp
Specifies the minimum performance requirements, technical characteristics and methods of testing with required test results of survival craft portable two-way radiotelephone apparatus as required by chapter III of the 1988 amendments to the 1974 International Convention for the Safety of Life at Sea (SOLAS). (RC-004)
AS IEC 611602008 Design review (IEC 61160 Ed. 2.0 (English 2005))
AS/NZS 61241.1:2005 Protection by enclosures tD (IEC 61241-1 Ed. 1.0 (Bilingual 2004))
9pp
27pp
Adopts IEC 61160 Ed. 2.0 (2005) to provide nonprescriptive guidance on planning and conducting a design review during design and development, as a means of verifying that design input requirements are being met. Includes specific guidance on reliability, maintenance, maintenance support, availability and the life cycle of systems, products and equipment, and is suitable for use in conjunction with the AS/IEC 60300 series of dependability management Standards. (QR-005)
Specifies requirements for design, construction and testing of electrical apparatus protected by enclosures and surface temperature limitation for use in areas where combustible dust may be present in quantities which could lead to a fire or explosion hazard. This Standard supplements the general requirements in AS/NZS61241.0 and it is identical with and has been reproduced from IEC61241-1:2004. (EL-014)
AS IEC 611642008 Reliability growthStatistical test and estimation methods (IEC 61164 Ed. 2.0 (English 2004)) 49pp
Adopts IEC 61164 Ed. 2.0 (2004) to describe the power law reliability growth model and related projection model, with step-by-step guidance on their use. (QR-005)
AS/NZS 61241.2.1:2000 Test methodsMethods for determining the minimum ignition temperatures of dust (IEC 61241-2-1 Ed. 1.0 (Bilingual 1994)) 25pp
Specifies two test methods for determining the minimum ignition temperatures of dust. This Standard is identical with and has been reproduced from IEC 61241-2-1:1994. (EL-014)
AS IEC 61131 Programmable controllers AS IEC 61131.12004 General information (IEC 61131-1 Ed. 2.0 (English 2003))
AS IEC 611652008 Application of Markov techniques (IEC 61165 Ed. 2.0 (Bilingual 2006)) 13pp
29pp
Adopts IEC 61131-1:2003 which establishes the definitions and identifies the principal characteristics relevant to the selection and application of programmable controllers and their associated peripherals. (IT-006)
Adopts IEC 61165, Ed. 2.0 (2006) to provide guidance on the application of Markov techniques to modelling and analysing a system which exhibits state-dependent behaviour and to estimating reliability, availability, maintainability and safety measures. (QR-005)
AS/NZS 61241.2.2:2000 Test methodsMethod for determining the electrical resistivity of dust in layers (IEC/TS 61241-2-2 Ed. 1.0 (Bilingual 1993)) 4pp
Specifies a test method to determine, by application of a d.c. voltage, the electrical resistivity of a layer of dust. Is to be used in the design, construction, testing and application of electrical apparatus for use in the presence of combustible dust.This Standard is identical with and has been reproduced from IEC 61241-22:1993. (EL-014)
AS IEC 61131.22004 Equipment requirements and tests (IEC 61131-2 Ed. 2.0 (English 2003)) 112pp
Adopts IEC 61131-2:2003 which specifies requirements and related tests for programmable controllers (PLC) and their associated peripherals (for example, programming and debugging tools (PADTs), humanmachine interfaces (HMIs), etc.) which have as their intended use the control and command of machines and industrial processes. (IT-006)
AS/NZS 61184:2007 Bayonet lampholders (IEC 61184, Ed. 2.0 (1997) MOD) 53pp
Proposes general and safety requirements for Bayonet lampholders used for general purposes. (EL-041)
AS 61204 Low-voltage power supply devices, d.c. output AS 61204.12003 Performance characteristics (IEC 61204 Ed. 1.0 (Bilingual 1993))
AS/NZS 61241.2.3:2000 Test methodsMethod for determining the minimum ignition energy of dust/air mixtures (IEC 61241-2-3 Ed. 1.0 (Bilingual 1994)) 17pp
Specifies a method of test to determine the minimum ignition energy of a dust/air mixture by an electrically generated high-voltage d.c. spark. This test method is intended to develop data to be used in deciding whether or not combustible dust/air mixtures are considered to be ignitable with respect to electrical discharge. This Standard is identical with and has been reproduced from IEC 61241-2-3:1994. (EL-014)
AS IEC 61131.32004 Programming languages (IEC 61131-3 Ed. 2.0 (English 2003)) 204pp
Adopts IEC 61131-3:2003 which specifies syntax and semantics of programming languages for programmable controllers as defined in AS IEC 611311. (IT-006)
21pp
Describes a method for specifying requirements for low-voltage power supply devices providing d.c. output(s) up to 200 V d.c. Tests for conforming compliance are included. This Standard is identical to IEC 61204:1993. (EL-027)
AS IEC 61131.42004 User guidelines (IEC/TR 61131-4 Ed. 1.0 (Bilingual 1995)) 49pp
Adopts IEC 61131-4:1995 which provides guidelines that address the application of the programmable controllers (PC) and associated peripherals. It also deals with the integration of PCs into the automated system. (IT-006)
AS/NZS 61210:2002 Connecting devicesFlat quick-connect terminations for electrical copper conductors Safety requirements (IEC 61210:1993, MOD) 20pp
Specifies requirements for flat quick-connect terminations consisting of a male tab size 2.8, 4.8, 6.3 or 9.5 mm and mating female conenctor for use as either an incorporated or an integrated part of an equipment or of a component, or as a separate entity, for connecting electrical copper conductors according to the manufacturer's instructions. (EL-004)
AS/NZS 61241.4:2002 Type of protection 'pD' (IEC 61241-4 Ed. 1.0 (English 2001))
19pp
Specifies the requirements for design, construction, testing and marking of electrical apparatus, with type of protection pressurization 'pD', intended for use in combustible dust atmospheres. This Standard is identical with and has been reproduced from IEC 612414:2001. (EL-014)
93pp
Adopts IEC 61131-5:2000 which specifies communication aspects of a programmable controller. It specifies from the viewpoint of a PC how any device can communicate with a PC as a server and how a PC can communicate with any device. In particular, it specifies the behaviour of the PC as it provides services on behalf of other devices and the services the PC application program can request from other devices. (IT-006)
AS/NZS 61231:2001 International lamp coding system (ILCOS) (IEC/TS 61231 Ed. 2.0 (Bilingual 1999)) 17pp
Specifies international lamp coding system (ILCOS) technical specifications to maufacturers, suppliers, consumers and regulators. This document is identical to IEC TS 61231:1996 and is reproduced from it. (EL-041)
AS/NZS 61241.10:2005 Classification of areas where combustible dusts are or may be present (IEC 61241-10 Ed. 1.0 (Bilingual 2004)) 20pp
Amendment 1 16 March 2007 Provides classification of areas where explosive dust/air mixtures and combustible dust layers are present, in order to permit the proper selection of equipment for use in such areas. This Standard is identical with and has been reproduced from IEC6124110:2004. (MS-011)
AS IEC 61131.72004 Fuzzy control programming (IEC 61131-7 Ed. 1.0 (Bilingual 2000)) 50pp
Adopts IEC 61131-7:2000 which offers the manufacturers and the users a well-defined common under-
AS/NZS 61241 Set:2008 Electrical apparatus for use in the presence of combustible dust Set 228pp AS/NZS 61241 Electrical apparatus for use in the presence of combustible dust
AS/NZS 61241.11:2006 Protection by intrinsic safety iD (IEC 61241-11 Ed. 1.0 (Bilingual 2005), IEC 61241-11 Ed. 1.0 Cor.1 (Bilingual 2006)) 10pp
This part of IEC 61241 specifies requirements for the construction and testing of intrinsically safe apparatus
254
AS/NZS 61347.2.5:2002 Particular requirements for d.c. supplied electronic ballasts for public transport (IEC 61347-2-5 Ed. 1.0 (Bilingual 2000)) 9pp
Specifies electrical safety requirements for road and railway vehicles, tram cars and craft used for public transport. This Standard is identical to and reproduced from IEC 61347-2-5:2000. (EL-041)
AS 61508 Set2005 Functional safety of electrical/electronic/programmable electronic safety-related systems Set AS 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems AS 61508.02006 Functional safety and AS 61508 (IEC/TR 61508-0 Ed. 1.0 (Bilingual 2005)) 12pp
Adopts IEC/TR 61508-0:2005 to provide an introduction to the concept of functional safety and gives a overview of the IEC 61508 series of standards. Functional safety applies to the development of the electrical, electronic or programmable electronic systems with safety implication. (IT-006)
AS/NZS 61347.2.6:2002 Particular requirements for d.c supplied electronic ballasts for aircraft lighting (IEC 61347-2-6 Ed. 1.0 (Bilingual 2000)) 9pp
Specifies safety requirements for d.c. supplied electronic ballasts intended for operation from power sources with transients and surges such as aircraft. This Standard is identical to and reproduced from IEC 61347-2-6:2000. (EL-041)
AS/NZS 61241.18:2005 Protection by encapsulation ' mD' (IEC 61241-18 Ed. 1.0 (Bilingual 2004)) 24pp
Specifies requirements for design, construction and testing of electrical apparatus, parts of electrical apparatus and Ex components where the rated voltage does not exceed 10kV. This Standard applies to electrical apparatus protected by encapsulation type of protection 'mD' and surface temperature limitation for use in areas where combustible dust may be present in quantities which could lead to a fire or explosion hazard. This Standard is to be read in conjunction with AS/NZS61241.0, the requirements of which apply to electrical apparatus protected by encapsulation and surface temperature limitation unless specifically excluded. This Standard is identical with and has been reproduced from IEC61241-18:2004. (EL-014)
AS/NZS 61347.2.8:2003 Particular requirements for ballasts for fluorescent lamps (IEC 61347-2-8:2000, MOD) 14pp
Specifies safety requirements for ballasts excluding resistance types and used in a.c. supplies up to 1000 V. This Standard is reproduced from IEC 61347-28:2000 and modified to suit national requirements. (EL-041)
AS 61508.11999 General requirements (IEC 61508-1 Ed. 1.0 (Bilingual 1998)) 51pp
Specifies general requirements for a generic approach for all safety lifecycle activities used in electrical/electronic/programmable electronic devices used in safety-related applications. The Standard is identical with and has been reproduced from IEC 615081:1998. (IT-006)
AS/NZS 61347.2.9:2004 Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) (IEC61347-2-9:2000 MOD) 16pp
Specifies particular safety requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. This Standard is reproduced from IEC 61347-2-9:2000 including its Amendment 1:2003. (EL-041)
AS 61508.22001 Requirements for electrical/electronic/programmable electronic safety-related systems (IEC 61508-2 Ed. 1.0 (Bilingual 2000)) 59pp
Specifies the safety lifecycle activities in systems comprised of electrical/electronic/programmable electronic devices with the requirements for techniques and measures that are graded against safety integrity levels, for the avoidance and control of faults and failures. (IT-006)
AS/NZS 61347 Lamp controlgear AS/NZS 61347.1:2002 General and safety requirements (IEC 61347-1:2000, MOD) 50pp
Specifies electrical safety requirements for lamp controlgear for use in d.c. supplies up to 250 V and a.c. supplies up to 1000 V. This Standard is reproduced from IEC 61347-1:2000 and varied to suit Australian/New Zealand conditions. (EL-041)
AS/NZS 61347.2.10:2004 Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) (IEC61347-2-10:2000 MOD) 15pp
Specifies particular safety requirements for electronic invertors and convertors for high-frequency operation of tubular cold-cathode discharge lamps used in signs and luminous discharge tube installations. (EL-041)
AS 61508.31999 Software requirements (IEC 61508-3 Ed. 1.0 (Bilingual 1998)) 42pp
Specifies software requirements for a generic approach for all safety lifecycle activities when applied to safety-related software. The Standard is identical with and has been reproduced from IEC 615083:1998. (IT-006)
AS/NZS 61347.2.1:2002 Particular requirements for starting devices (other than glow starters) (IEC 61347-2-1 Ed. 1.0 (Bilingual 2000)) 15pp
Specifies safety requirements for starting devices for fluorescent and other discharge lamps for use on a.c. supplies up to 1000 V at 50/60 Hz in combination with lamps and ballasts. This Standard is identical to and reproduced from IEC 61347-2-1:2000. (EL-041)
AS/NZS 61347.2.11:2003 Particular requirements for miscellaneous electronic circuits used with luminaires (IEC 61347-2-11:2001, MOD) 3pp
Specifies general and safety requirements for miscellaneous electronic circuits used with luminaires for use on a.c. supplies up to 1000 V and d.c. supply up to 250 V. This Standard is reproduced from IEC 613472-11 and modified to suit national requirements. (EL-041)
AS 61508.41999 Definition and abbreviations (IEC 61508-4 Ed. 1.0 (Bilingual 1998)) 21pp
Provides the definitions and abbreviations used in other parts of this series of Standards. The Standard is identical with and has been reproduced from IEC 61508-4:1998. (IT-006)
AS/NZS 61347.2.2:2007 Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2, Ed. 1.2 (2006) MOD) 30pp
Specifies safety requirements for electronic step-down convertors associated with tungsten-halogen lamps and other filament lamps. (EL-041)
AS 61400 Wind turbines AS 61400.2(Int)2006 Design requirements for small wind turbines 80pp (Expired 13 June 2008)
This Interim Standard specifies design requirements for small wind turbines (viz with a swept area up to 200 m2). (EL-048)
AS 61508.51999 Examples of methods for the determination of safety integrity levels (IEC 61508-5 Ed. 1.0 (Bilingual 1998)) 23pp
Provides information on the concepts and relationship of risk to safety integrity together with methods of determining safety integrity levels. The Standard is identical with and has been reproduced from IEC 615085:1998. (IT-006)
AS/NZS 61347.2.3:2004 Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps (IEC61347-2-3:2000, MOD) 15pp
Specifies particular safety requirements for electronic ballast associated with fluorescent lamps as specified in AS/NZS4782.1, AS/NZS60901 and other fluorescent lamps for high frequency operation. (EL-041)
AS 61400.212006 Measurement and assessment of power quality characteristics of grid connected wind turbines (IEC 61400-21 Ed. 1.0 (English 2001)) 38pp
Specifies a methodology for the measurement and assessment of the power quality characteristics of grid connected wind turbines. (EL-048)
AS 61508.62001 Guidelines on the application of AS 61508.2 and AS 61508.3 (IEC 61508-6 Ed. 1.0 (Bilingual 2000)) 64pp
Specifies the safety lifecycle activities in systems comprised of electrical/electronic/programmable electronic devices with quidelines on the applications, calculations and methodologies as outlined in Part 2 and in Part 3 of this Standard. (IT-006)
AS/NZS 61347.2.4:2002 Particular requirements for d.c. supplied electronic ballasts for general lighting (IEC 61347-2-4 Ed. 1.0 (Bilingual 2000)) 6pp
Specifies safety requirements for d.c. supplied electronic ballasts for operation from surge-free power sources from batteries without charging equipment. This Standard is identical to and reproduced from IEC 61347-2-4:2000. (EL-041)
AS/NZS 61459:2000 Low-voltage fusesCoordination between fuses and contactors/motor-starters Application guide (IEC/TR 61459 Ed. 1.0 (Bilingual 1996)) 14pp
Provides guidance to assist in selecting a fuse-link to ensure coordination with contactors or motor-starters (contactors with overload relay). This Standard is identical with and is reproduced from IEC 61459:1996. (EL-007)
AS 61508.72001 Overview of techniques and measures (IEC 61508-7 Ed. 1.0 (Bilingual 2000)) 105pp
Specifies the safety lifecycle activities in systems comprised of electrical/electronic/programmable electronic devices with an overview of various safety
255
AS IEC 61511.12004
techniques and measures as outlined in Part 2 and in Part 3 of this Standard. (IT-006)
AS IEC 61511 Functional safetySafety instrumented systems for the process industry sector AS IEC 61511.12004 Framework, definitions, systems, hardware and software requirements (IEC 61511-1 Ed. 1.0 (Bilingual 2003)) 74pp
Adopts IEC 61511-1 which specifies requirements for the specification, design, installation, operation and maintenance of a safety instrumented system, so that it can be confidently entrusted to place and/or maintain the process in a safe state. (IT-006)
AS/NZS 61558.2.3:2001 Particular requirements for ignition transformers for gas and oil burners (IEC 61558-2-3:1999, IDT) 12pp
Specifies general safety requirements for approval and test purposes for ignition transformers for gas and oil burners. This Standard is an adoption with national modifications and contains the full text of IEC 615582-3:1999. (EL-002)
AS/NZS 61558.2.17:2001 Particular requirements for transformers for switch mode power supplies (IEC 61558-2-17:1997, MOD) 12pp
Specifies general safety requirements for approval and test purposes for transformers for switch mode power supplies. This Standard is an adoption with national modifications and contains the full text of IEC 615582-17:1997. (EL-002)
AS/NZS 61558.2.4:2001 Particular requirements for isolating transformers for general use (IEC 615582-4:1997, MOD) 9pp
Specifies general safety requirements for approval and test purposes for isolating transformers for general use. This Standard is an adotpion with national modifications and contains the full text of IEC 61558-24:1997. (EL-002)
AS/NZS 61558.2.23:2001 Particular requirements for transformers for construction sites (IEC 61558-223:2000, MOD) 18pp
Specifies general safety requirements for approval and test purposes for transformers for construction sites. This Standard is an adoption with national modifications and contains the full text of IEC 61558-223:2000. (EL-002)
AS IEC 61511.22004 Guidelines for the application of AS IEC 61511-1 (IEC 61511-2 Ed. 1.0 (English 2003)) 63pp
Adopts IEC 61511-2 which specifies guidance on the specification, design, installation, operation and maintenance of Safety Instrumented Functions and related safety instrumented system as defined in IEC 61511-1. (IT-006)
AS/NZS 61558.2.5:2003 Particular requirements for shaver transformers (IEC 61558-2-5:1997, MOD) 12pp
Specifies general safety requirements for approval and test purposes for shaver transformers. This Standard is an adoption with national modifications and contains the full text of IEC 61558-2-5:1997. (EL-002)
AS IEC 616692003 ElectroacousticsEquipment for the measurement of real-ear acoustical characteristics of hearing aids (IEC 61669 Ed. 1.0 (Bilingual 2001)) 13pp
Specifies the general requirements for test equipment designed for use in measuring the real-ear acoustical characteristics of hearing aids and describes the terminology used. This Standard is identical with and reproduced from IEC 61669:2001. (AV-003)
AS IEC 61511.32004 Guidance for the determination of the required safety integrity levels (IEC 61511-3 Ed. 1.0 (English 2003)) 46pp
Adopts IEC 61511-3 which specifies the underlying concepts of risk, the relationship of risk to safety integrity, the determination of tolerable risk and a number of different methods that enable the safety integrity levels for the safety instrumented functions to be determined. (IT-006)
AS/NZS 61558.2.6:2001 Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997, MOD) 9pp
Amendment 1 23 June 2006 Specifies safety requirements for approval and test purposes for safety isolating transformers. This Standard is an adoption with national modifications and contains the full text of IEC 61558-2-6:1997. (EL-002)
AS IEC 61672 ElectroacousticsSound level meters AS IEC 61672.12004 Specifications (IEC 61672-1 Ed. 1.0 (Bilingual 2002)) 39pp
Provides electroacoustical performance specifications of sound level meters. Identical with and reproduced from IEC 61672-1:2002. (AV-002)
AS/NZS 61534 Powertrack systems AS/NZS 61534.1:2008 General requirements (IEC 61534-1, Ed. 1 (2003) MOD) 56pp
Specifies requirements and tests for powertrack systems with a rated voltage of 277 V a.c. single-phase and 480 V a.c. multi-phase and a maximum current of 63 A. (EL-004)
AS/NZS 61558.2.7:2008 Particular requirements for transformers and power supplies for toys (IEC 61558-2-7 Ed. 2.0 (Bilingual 2007)) 13pp
Deals with safety aspects of transformers for toys and power supplies incorporating transformers for toys such as electrical, thermal and mechanical safety. (EL-002)
AS IEC 61672.22004 Pattern evaluation tests (IEC 61672-2 Ed. 1.0 (Bilingual 2003)) 35pp
Provides details of the tests necessary to verify conformance to all mandatory specifications for sound levels meters. Identical with and reproduced from IEC 61672-2:2003. (AV-002)
AS/NZS 61535 Installation couplers AS/NZS 61535.1:2003 General requirements (IEC 61535-1)
AS/NZS 61558.2.7:2001 Particular requirements for transformers for toys (IEC 61558-2-7:1997, MOD) 12pp Available Superseded
Specifies general safety requiremetns for approval and test purposes for transformers for toys. This Standard is an adoption with national modifications and cotnains the full text of IEC 61558-2-7:1997. (EL-002)
AS 61800 Adjustable speed electrical power drive systems AS 61800.12007 General requirementsRating specifications for low voltage adjustable speed d.c. power drive systems (IEC 61800-1 Ed. 1.0 (Bilingual 1997)) 93pp
Describes the characteristics of the converters and their relationship with the complete d.c. drive system. Also states their performance requirements with respect to ratings, normal operating conditions, overload conditions, surge withstand capabilities, stability, protection, a.c. line earthing, and testing. Furthermore, it deals with application guidelines, such as control strategies, diagnostics, and topologies. (EL-027)
40pp
Applies to installation couplers with two- to fivepoles with or without earthing contact and with a rated voltage up to and including 500 V a.c. and a rated current up to and including 32 A for permanent connection in indoor installation systems according to AS/NZS 3000. (EL-004)
AS/NZS 61558.2.8:2001 Particular requirements for bell and chime transformers (IEC 61558-2-8:1998, IDT) 11pp
Specifies general safety requirements for approval and test purposes for bell and chime transformers. This Standard is an adotpion with national modifications and contains the full text of IEC 61558-2-8:1998. (EL-002)
AS/NZS 61558 Safety of Power Transformers, Power Supplies, Reactors and Similar Products AS/NZS 61558.1:2008 General requirements and test (IEC 61558-1 Ed 2, MOD) 149pp
Deals with safety aspects of power transformers, power supplies, reactors and similar products such as electrical, thermal and mechanical safety. (EL-002)
AS/NZS 61558.1:2000 General requirements and tests (IEC 61558-1 Ed. 1.0 (Bilingual 1997)) 123pp
Amendment 1 12 November 2001 Amendment 2 31 May 2004 Amendment 3 15 October 2004 Amendment 4 25 November 2005 Amendment 5 20 October 2006 Amendment 6 30 November 2007 Specifies general safety requirements for approval and test purposes. This Standard is an adoption with national modifications and contains the full text of IEC 61558-1:1998. (EL-002)
AS/NZS 61558.2.9:2003 Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9 Ed. 1.0 (Bilingual 2002)) 16pp
Specifies general safety requirements for approval and test purposes for transformers for class III handlamps for tungsten filament lamps. This Standard is an adoption with national modifications and contains the full text of IEC 61558-2-9:2002. (EL-002)
AS 61800.22004 General requirementsRating specifications for low voltage adjustable frequency a.c. power drive systems (IEC 61800-2 Ed. 1.0 (Bilingual 1998)) 85pp
Defines overall characteristics and performance requirements for converters with a supply voltage up to 1kV a.c. (EL-027)
AS/NZS 61558.2.15:2001 Particular requirements for isolating transformers for the supply of medical locations (IEC 61558-2-15:1999, MOD) 15pp
Specifies general safety requirements for approval and test purposes for isolating transformers for the supply of medical locations. This Standard is an adoption with national modifications and contains the full text of IEC 61558-2-15:1999. (EL-002)
AS 61800.32005 EMC requirements and specific test methods (IEC 61800-3 Ed. 2.0 (Bilingual 2004)) 109pp
Specifies electromagnetic compatibility (EMC) requirements for adjustable speed a.c. or d.c. motor drives connected to mains supplies up to 1000V a.c. Defines limits and test methods. Drives in traction applications are not covered. (EL-027)
256
AS 61850.7.12005 Basic communication structure for substation and feeder equipmentPrinciples and models (IEC 61850-7-1 Ed. 1.0 (English 2003)) 105pp
Provides users and manufacturers of substation automation equipment with assistance to understand the basic modelling concepts and description methods for substation-specific information models for substation automation systems, device functions used for substation automation purposes, and communication systems to provide interoperability within substations. (EL-050)
AS IEC 618822003 Hazard and operability studies (HAZOP studies)Application guide (IEC 61882 Ed. 1.0 (Bilingual 2001)) 52pp
Specifies a guide for HAZOP studies of systems utilizing the specific set of guide words defined in this document. It also gives guidance on the application of the technique and on the HAZOP study procedure, including definition, preparation, examination sessions and resulting documentation and follow-up. This Standard is identical with and has been reproduced from IEC 61882:2001. (QR-008)
AS 61800.62007 Guide for determination of types of load duty and corresponding current ratings (IEC/TR 61800-6 Ed. 1.0 (Bilingual 2003)) 12pp
Provides alternative methods for specifying ratings for adjustable speed electrical power drive systems (PDS) and in particular their basic drive modules (BDM). (EL-027)
AS 618182005 Application guide for low-voltage fuses (IEC/TR 61818 Ed. 1.0 (Bilingual 2003))
AS 61850.7.22005 Basic communication structure for substation and feeder equipmentAbstract communication service interface (ACSI) (IEC 61850-7-2 Ed. 1.0 (English 2003)) 159pp
Provides users and manufacturers of substation automation equipment with a definition of the abstract communication service interface (ACSI) for use in the utility substation domain that require real-time cooperation of intelligent electronic devices. (EL-050)
ATS 619152005 Low-voltage switchgear and controlgear Principles for the development of device profiles for networked industrial devices (IEC/TS 61915 Ed. 1.0 (Bilingual 2003)) 59pp
Propose a framework for common representation of networked industrial device, and a template for such a representation, independent of the network used. Is identical with and reproduced from Edition 1.0 (2003-04) of IEC Technical Specification 61915. (EL-006)
24pp
Applies to the application of low-voltage fuses, shows how current-limiting fuses are easy to apply to protect todays complex and sensitive electronic equipment. It specifically covers low-voltage fuses up to a.c. 1000V and d.c. 1500V according to AS60269. (EL-007)
AS/NZS IEC 61935 Testing of balanced communication cabling in accordance with ISO/IEC 11801 AS/NZS IEC 61935.1:2006 Installed cabling (IEC 61935-1 Ed. 2.0 (Bilingual 2005)) 68pp
Adopts IEC 61935-1:2005 to specify reference measurement procedures for cabling parameters and the requirements for field tester accuracy to measure cabling parameters identified in ISO/IEC 11801. (CT-001)
AS 61850 Communication networks and systems in substations AS 61850.12005 Introduction and overview (IEC/TR 61850-1 Ed. 1.0 (English 2003)) 32pp
Provides guidance on the series of Standards applying to substation automation equipment and systems with an explanation of their structural elements, configurations and basic functions. (EL-050)
AS 61850.7.32005 Basic communication structure for substation and feeder equipmentCommon data classes (IEC 61850-7-3 Ed. 1.0 (English 2003)) 52pp
Provides users and manufacturers of substation automation equipment with specification of common attribute types and common data classes related in substation applications. (EL-050)
AS 61850.7.42005 Basic communication structure for substation and feeder equipmentCompatible logical node classes and data classes (IEC 61850-7-4 Ed. 1.0 (English 2003)) 91pp
Provides users and manufacturers of substation automation equipment with specifications for the information model of devices and functions related to substation applications. In particular, it specifies the compatible logical node names and data names for communication between Intelligent Electronic Devices (IED). This includes the relationship between Logical Nodes and Data. (EL-050)
AS/NZS IEC 61935.2:2006 Patch cords and work area cords (IEC 61935-2 Ed. 2.0 (Bilingual 2005)) 16pp
Adopts IEC 61935-2:2005 to provide methods to ensure the compatibility of modular plug cords to be used in cabling according to ISO/IEC 11801 and provides test methods and associated requirements to demonstrate the performance and reliability of these cords during their operational lifetime. (CT-001)
AS/NZS 62013 Caplights for use in mines susceptible to firedamp AS/NZS 62013.1:2001 General requirementsConstruction and testing in relation to the risk of explosion (IEC 62013-1 Ed. 1.0 B (1999)) 15pp
Specifies the requirements for the construction and testing of caplights for use in mines susceptible to firedamp or which have become temporarily endangered by the explosive atmosphere of firedamp. It deals with the risk of the caplight becoming a source of ignition. This Standard is identical to and has been reproduced from IEC 62013-1:1999. (EL-023)
AS 61850.32005 General requirements (IEC 61850-3 Ed. 1.0 (Bilingual 2002)) 13pp
Provides users and manufacturers of substation automation equipment with general requirements for the communication network. (EL-050)
AS 61850.42005 System and project management (IEC 61850-4 Ed. 1.0 (Bilingual 2002)) 26pp
Provides users and manufacturers of substation automation equipment with specifications for the engineering process and its supporting tools. (EL-050)
AS 61850.8.12005 Specific communication service mapping (SCSM)Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 (IEC 61850-8-1 Ed. 1.0 (English 2004)) 133pp
Provides users and manufacturers of substation automation equipment with specification of a method of exchanging time-critical and non-time-critical data through local-area networks by mapping ACSI to MMS and ISO/IEC 8802-3 frames. (EL-050)
AS 61850.52005 Communication requirements for functions and device models (IEC 61850-5 Ed. 1.0 (English 2003)) 126pp
Provides users and manufacturers of substation automation equipment with specifications for the communication requirements of the functions being performed in the substation automation system and for device models. (EL-050)
AS 61850.9.12005 Specific communication service mapping (SCSM)Sampled values over serial unidirectional multidrop point to point link (IEC 61850-9-1 Ed. 1.0 (English 2003)) 22pp
Provides users and manufacturers of substation automation equipment with specification of the specific communication service mappings for the communication between bay and process level and it specifies a mapping on a serial unidirectional multidrop point to point link. (EL-050)
AS/NZS 62013.2:2001 Performance and other safety-related matters (IEC 62013-2 Ed. 1.0 (Bilingual 2000)) 9pp
Details those performance and other safety features of caplights for use in mines susceptible to firedamp that are not covered in AS/NZS 62013.1 but which are nevertheless important for the safety and working conditions of the user. It may be applied for use in mines not likely to be endangered by firedamp. This Standard is identical to and has been reproduced from IEC 62013-2:2001. (EL-023)
AS 61850.62005 Configuration description language for communication in electrical substations related to IEDs (IEC 61850-6 Ed. 1.0 (English 2004)) 228pp
Provides users and manufacturers of substation automation equipment with specification for a file format for describing communication related IED (Intelligent Electronic Device) configurations and IED parameters, communication system configurations, switchyard (function) structures, and the relations between them. (EL-050)
AS 61850.9.22005 Specific communication service mapping (SCSM)Sampled values over ISO/IEC8802-3 (IEC 61850-9-2 Ed. 1.0 (English 2004)) 25pp
Provides users and manufacturers of substation automation equipment with a definition of the Specific Communication Service Mapping (SCSM) for the transmission of sampled values according to the abstract specification in IEC 61850-7-2. (EL-050)
AS/NZS 62026 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) AS/NZS 62026.1:2001 General rules (IEC 62026-1 Ed. 1.0 (Bilingual 2000))
8pp
Applies to interfaces between low-voltage switchgear, controlgear and controllers including industrial CDIs for control system, factory and process automation. This Standard is identical with and has been reproduced from IEC 62026-1:2000. (EL-006)
257
AS/NZS 62026.2:2001
AS/NZS 62026.2:2001 Actuator sensor interface (IEC 62026-2 Ed. 1.0 (Bilingual 2000)) 78pp
Applies to interfaces between low-voltage switchgear and controlgear switching elements and controllers, including industrial CDIs for control systems, factory and process automation, specifies requirements for a bit-oriented interface-system between a single-control circuit device and switching elements connected by a non-shielded, entwisted two-wire cable carrying data and power, and establishes a system for the interchangeability of components with such interfaces. This Standard is identical with and has been reproduced from IEC 62026-2:2000. (EL-006)
AS 62040.32002 Method of specifying the performance and test requirements (IEC 62040-3 Ed. 1.0 (Bilingual 1999)) 91pp
Amendment 1 21 August 2003 Provides a method for specifying and assessing the performance of uninterruptible power systems (UPS) with a rated voltage not exceeding 1000 V a.c. and with an energy storage device. This Standard has been reproduced from, and is technically identical to, IEC 62040-3:1999. (EL-027)
trical control systems for machines. It is applicable to control systems used, either singly or in combination, to carry out safety-related control functions on machines that are not portable by hand, (including groups of machines working together in a coordinated manner). (EL-017)
AS IEC 620732005 Guidance on the measurement of wettability of insulator surfaces (IEC/TS 62073 Ed. 1.0 (English 2003)) 15pp
Provides guidance on measuring the wettability of the surfaces of insulators for use on overhead lines. (EL-010)
AS/NZS 62026.3:2001 DeviceNet (IEC 62026-3 Ed. 1.0 (Bilingual 2000)) 134pp
Applies to interfaces between low-voltage switchgear and controlgear and controllers, including industrial CDIs for control systems, factory and process automation, specifies an interface system between a single controller or multiple controllers, and control circuit devices or switching elements and establishes requirements for the interchangeability of components with such interfaces. This Standard is identical with and has been reproduced from IEC 62026-3:2000. (EL-006)
AS 62052 Electricity metering equipment (AC)General requirements, tests and test conditions AS 62052.112005 Metering equipment (IEC62052-11, Ed.1.0 (2003) MOD) 39pp
Specifies type tests for electricity metering equipment. (EL-011)
AS/NZS 62087 Power consumption of audio, video and related equipment AS/NZS 62087.2.1:2008 Minimum energy performance standards (MEPS) requirements for digital television set-top boxes 19pp
(TE-001)
AS 62052.212006 Tariff and load control equipment (IEC62052-21, Ed. 1.0 (2004) MOD)
39pp
Provides type tests for tariff and load control equipment for electricity metering equipment. (EL-011)
AS/NZS 62087:2004 Methods of measurement for the power consumption of audio, video and related equipment (IEC 62087 Ed. 1.0 (English 2002)) 11pp
Specifies methods of measurement for the power consumption of TV receivers, VCRs, Set Top Boxes (STBs), audio equipment and multi-function equipment for consumer use. (TE-001)
AS/NZS 62026.5:2001 Smart distributed system (SDS) (IEC 62026-5 Ed. 1.0 (Bilingual 2000)) 49pp
Applies to interfaces between low-voltage switchgear and controlgear and controllers including industrial CDIs for control systems, factory and process automation, specifies an interface system between a single or multiple controlling device and control circuit devices or switching elements and establishes a system for the interchageability of components with such interfaces. This Standard is identical with and has been reproduced from IEC 62026-5:2000. (EL-006)
AS 62053 Electricity metering equipment (AC) Particular requirements AS 62053.212005 Static meters for active energy (classes 1 and 2) (IEC 62053-21 Ed.1.0 (2003) MOD) 18pp
Specifies requirements and tests for class 1 and 2 watthour meters. (EL-011)
AS 621032006 Electronic equipment for use in power installations (IEC 62103 Ed. 1.0 (Bilingual 2003)) 135pp
Proposes generic general and safety requirements for electronic equipment used in power installations. This Standard is to be used where a product specific Standard does not exist. (EL-027)
AS/NZS 62026.6:2002 Seriplex (Serial multiplexed control bus) (IEC 62026-6 Ed. 1.0 (English 2001)) 76pp
Specifies requirements, in addition to those of AS/NZS 62026.1:2001, for interface systems between single or multiple controllers and control circuit devices and switching elements. Establishes requirements for the interchangeability of components of such interfaces. This Standard is identical with and has been reproduced from IEC 62026-6:2001. (EL-006)
AS 62053.222005 Static meters for active energy (classes 0.2 S and 0.5 S) (IEC 62053-22 Ed. 1.0 (English 2003)) 12pp
To provide requirements and tests for class 0.2 and 0.5 watthour meters. (EL-011)
AS/NZS 62115:2008 Electric ToysSafety (IEC 62115 Ed. 1.1 (Bilingual 2006))
35pp
AS 62053.232006 Static meters for reactive energy (classes 2 and 3) (IEC 62053-23 Ed. 1.0 (Bilingual 2003)) 15pp
Provides requirements and tests for static electricity meters for reactive energy (classes2 and 3). (EL-011)
AS 62040 Uninterruptible power systems (UPS) AS 62040.1.12003 General and safety requirements for UPS used in operator access areas (IEC 62040-1-1 Cor 1 Ed. 1.0 (2002), IEC 62040-1-1 Ed. 1.0 (English 2002)) 38pp
Specifies general and safety requirements for low voltage electronic Uninterruptible Power Systems (UPS) installed in operator accessible areas. This Standard is to be read in conjunction with AS/NZS 60950.1. (EL-027)
AS 62054 Electricity metering (ac)Tariff and load control AS 62054.112006 Particular requirements for electronic ripple control receivers (IEC 62054-11 Ed. 1.0 (English 2004)) 19pp
Provides requirements and tests for ripple control receivers. (EL-011)
Deals with the safety of toys that have at least one function dependent on electricity. Examples of toys within the scope of this standard are constructional sets; experimental sets; functional toys (having a function similar to an appliance or installation used by adults) and video toys (toys having a screen and means of activation, such as a joystick or keyboard. Separate screens having a rated voltage of more than 24 v are not considered to be part of the toy). Toys using electricity for secondary functions are also within the scope of this standard (a dolls house having an interior lamp is an example of such a toy). (EL-002)
AS IEC 621552005 InsulatorsCeramic or glassHollow pressurized and unpressurizedVoltages greater than 1000V a.c. (IEC 62155 Ed. 1.0 (Bilingual 2003)) 46pp
Specifies tests for ceramic or glass hollow insulators for use on overhead lines. (EL-010)
AS 62040.1.22003 General and safety requirements for UPS used in restricted access locations (IEC 62040-1-2 Cor 1 Ed. 1.0 (2002), IEC 62040-1-2 Ed. 1.0 (English 2002)) 38pp
Specifies general and safety requirements for low voltage electronic Uninterruptible Power Systems (UPS) installed in areas with restricted access. This Standard is to be read in conjunction with AS/NZS 60950.1. (EL-027)
AS 62054.212006 Particular requirements for time switches (IEC 62054-21 Ed. 1.0 (English 2004)) 11pp
Provides requirements and tests for internal clocks for electricity meters. (EL-011)
AS 622082006 Empty enclosures for low-voltage switchgear and controlgear assembliesGeneral requirements (IEC 62208 Ed. 1.0 (Bilingual 2002)) 18pp
Provides requirements for enclosures intended to be used as part of switchgear and controlgear assemblies the rated voltage of which does not exceed 1000Va.c. at frequencies up to 1000Hz or 1500Vd.c. Is identical in technical content with and reproduced from IEC62208. (EL-006)
AS 62056 Electricity meteringData exchange for meter reading, tariff and load control AS 62056.212006 Direct local data exchange (IEC 62056-21 Ed. 1.0 (English 2002)) 62pp
Proposes the adoption of IEC 62056-21 which provides users and manufacturers with minimum requirements for hardware and protocols for local exchange of data between electricity meters and handheld units. (EL-011)
AS 62040.22008 Electromagnetic compatibility (EMC) requirements (IEC 62040-2 Ed. 2.0 (Bilingual 2005)) 33pp
Adopts IEC 62040-2, Ed. 2.0 (2005) which specifies EMC requirements for various categories of UPS systems to ensure an adequate level of electromagnetic compatibility (EMC) for UPS at public and industrial locations. UPS equipment needs to meet the relevant requirements of this Standard as a stand-alone product. (EL-027)
AS 622172007 Polymeric insulators for indoor and outdoor use with a nominal voltage > 1000 VGeneral definitions, test methods and acceptance criteria (IEC 62217 Ed. 1.0 (English 2005)) 28pp
Specifies common requirements for polymeric insulator for use on overhead lines (EL-010)
AS 620612006 Safety of machineryFunctional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061 Ed. 1.0 (Bilingual 2005)) 88pp
Provides requirements and makes recommendations for the specification, design and validation of safety-related elec-
AS 622312007 Composite station post insulators for substations with a.c. voltages greater than 1000 V up to 245 kVDefinitions, test methods and acceptance criteria (IEC 62231 Ed. 1.0 (English 2006)) 28pp
Specifies requirements and tests for composite station post insulators (EL-010)
258
AS/NZS ISO/IEC 90003:2007 Software engineeringGuidelines for the application of AS/NZS ISO 9001:2000 to computer software (ISO/IEC 90003:2004) 54pp
Adopts ISO 90003:2004 to provide guidance in the application of ISO 9001:2000 (Quality management systemsRequirements) in relation to complex software (IT-015)
AS 62271.3082005 Guide for asymmetrical short-circuit breaking test duty T100a (IEC/TR 62271-308 Ed. 1.0 (Bilingual 2002)) 38pp
Specifies test procedures for type testing of circuit breakers relevant to short-circuit breaking performance during asymmetrical test duty (T100a) as required by AS62271.100. (EL-007)
AS 62271.1022005 Alternating current disconnectors and earthing switches (IEC 62271-102, Ed.1.0(2003) MOD) 84pp
Specifies requirements for disconnectors and earthing switches designed for indoor and outdoor use at service frequencies up to and including 60Hz in systems having rated voltages exceeding 1000V. It also applies to the operating devices of these disconnectors and earthing switches and their auxiliary equipment. (EL-007)
CD DANGER2006 Dangerous Goods CD CD DOMESTIC2007 Domestic Building Standards CD CD HEALTH2006 31 Healthcare Standards on CD CD OHSC2008 OHS in Construction Set on CD CD STRUCTURAL2007 Structural Engineering Standards on CD CUSTOMER SATISFACTION SET2006 Customer Satisfaction Set FLOOR SET2008 Flooring Standards Set 183pp
AS/NZS IEC 62287 Maritime navigation and radiocommunication equipment and systemsClass B shipborne equipment of the automatic identification system (AIS) AS/NZS IEC 62287.1:2007 Carrier-sense time division multiple access (CSTDMA) techniques (IEC 62287-1 Ed. 1.0 (English 2006)) 82pp
Adopts IEC 62287-1:2006 to specify the minimum operation and performance requirements methods of testing and required results for Class B shipborne AIS equipment using CSTDMA techniques. (RC-004)
AS 62271.1102006 Inductive load switching (IEC 62271-110 Ed. 1.0 (Bilingual 2005)) 18pp
Specifies requirements for inductive current switching of a.c. circuit breakers designed for indoor or outdoor installation, for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1000 V. (EL-007)
AS 62271.2002005 A.C. metal-enclosed switchgear and controlgear for rated voltages above 1kV and up to and including 52kV (IEC 62271-200, Ed. 1 (2003) MOD) 74pp
Applies to factory-assembled metal-enclosed switchgear and controlgear for alternating current for rated voltages above 1kV up to and including 52kV for indoor and outdoor installations and for service frequencies up to and including 60Hz. (EL-007)
AS/NZS 62301:2005 Household electrical appliances Measurement of standby power (IEC62301, Ed. 1.0 (2005) MOD) 17pp
Specifies methods of measurement of electrical power consumption in standby mode. It is applicable to mains powered electrical household appliances and equipment and to the mains powered parts of appliances or equipment that use other fuels such as gas or oil. (EL-015)
ICT Set2006 Corporate governance of Information and Communication Technology (ICT) Set 88pp LEGAL RISK SET2007 Legal Risk Management Set MANUFACTURING CD2006 Manufacturing Standards on CD MARITIME STRUCTURES SET2005 Maritime Structures Set PLUMBING AND GAS SET2005 Plumbing and Gas Installations Set REFRIGERATION AND AIRCONDITIONING SET2007 Refrigeration and airconditioning Set 734pp STRUCTURES SET2005 International Structural Standards Set 181pp
AS IEC 623082008 Equipment reliabilityReliability assessment methods (IEC 62308 Ed. 1.0 (Bilingual 2006)) 47pp
Adopts IEC 62308 Ed. 1.0 (2006) to describe methods for early reliability assessment of items based on field data and test data for components and modules and applicable to mission, safety and business critical high integrity and complex items. It includes guidance on related activities, management of the reliability assessment process, and reliability programme planning and monitoring. (QR-005)
AS 62271.2012008 AC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-201 Ed. 1.0 (Bilingual 2006)) 76pp
Specifies requirements for factory-assembled insulation-enclosed switchgear and controlgear for alternating current of rated voltages above 1 kV and up to and including 52 kV for indoor installation and for service frequencies up to and including 60 Hz. (EL-007)
AS 62310 Static transfer systems (STS) AS 62310.12005 General and safety requirements (IEC 62310-1 Ed. 1.0 (Bilingual 2005)) 51pp
Applies to free standing a.c. static transfer system (STS) intended to ensure the continuity of power to load by automatically or manually controlled transfer, with or without interruption, from two or several a.c. independent sources. (EL-027)
AS 62271.2022008 High-voltage/low-voltage prefabricated substation (IEC 62271-202 Ed. 1.0 (Bilingual 2006)) 63pp
Specifies the service conditions, rated characteristics, general structural requirements and test methods of HV/LV or LV/HV prefabricated substations, which are cable-connected, to be operated from inside (walkin type) or outside (non-walk-in type) for alternating current of rated voltages above 1 kV and up to and including 52 kV on the HV side, and for one or more transformers for service frequencies up to and including 60 Hz for outdoor installation in locations with public accessibility. (EL-007)
Classified Standards
AS A341938 Dimensions of rivets from 1/2 inch to 1-3/4 inches diameter (excluding rivets for boilers) 4pp Obsolescent
Defines and illustrates the forms and dimensions of rivets (other than boiler rivets) of the snap head, pan head, pan head with tapered neck, rounded countersunk head and flat countersunk head types. (ME-029)
AS 62310.22006 Electromagnetic compatibility (EMC) requirements (IEC 62310-2 Ed. 1.0 (Bilingual 2006)) 30pp
Proposes electromagnetic compatibility (EMC) requirements for free standing a.c. static transfer systems (STS) intended to ensure the continuity of power to load by automatically or manually controlled transfer, with or without interruption, from two or several a.c. independent sources. (EL-027)
AS 62271.2032005 Gas-insulated metal-enclosed switchgear for rated voltages above 52kV (IEC62271203, Ed. 1.0 (2003) MOD) 57pp
Applies to gas-insulated metal-enclosed switchgear in which the insulation is obtained, at least partly, by an insulating gas other than air at atmospheric pressure for alternating current of rated voltages above 52kV. (EL-007)
AS B501960 Machine screws and machine screw nuts (BSW and BSF threads) (BS 450:1958) 56pp Obsolescent
Specifies dimensions and tolerances and general requirements for machine screws of the following types: 90 countersunk and raised countersunk, round, pan, cheese and mushroom with slotted heads, and 90 countersunk and raised countersunk, round, pan, raised cheese and mushroom with recessed heads. (ME-029)
AS IEC 623472008 Guidance on system dependability specifications (IEC 62347 Ed. 1.0 (Bilingual 2006)) 27pp
Adopts IEC 62347 Ed. 1.0 (2006) to provide a procedure for determining the dependability requirements for a system, and the rationale on the importance of dependability in determining and specifying the functions needed to meet a systems purpose, operating profile and performance objectives. (QR-005)
12pp
Amendment 1 1 July 1940 Applies to toolmakers' straightedges of short length, intended for very accurate work, and having one working
259
AS B831960
edge, which is bevelled and very slightly rounded off (commonly described as a 'knife-edge'). (ME-027)
24pp
AS B1451956 Large aluminium alloy rivets: 1/2 in. to 1 in. nominal diameters (BS 1974:1953) 24pp Obsolescent
Provides for small snap-head, conical head, small pan-head, rounded or flat countersunk head, shallow rounded or flat countersunk head rivets. Specifies the materials, dimensions, and head shapes for sizes from to 1 in. diameters. Head-forming tests and shear tests on the rivet stock and also on the manufactured rivets are specified. Appendices describe a method of determining ultimate shear stress of rivet stock and manufactured rivets, and recommended point shapes and main requirements for satisfactory driving. (ME-029)
sary, where ease of assembly is required, and where larger positive allowances are acceptable. (ME-011)
80pp
Amendment 1 1 July 1960 Amendment 2 1 July 1973 Applies to slip gauges of rectangular form in inch sizes up to 4 in. and to the commoner types of accessories used with such gauges, viz. measuring jaws, scribbing point and centre point holders (or slides) and base. Provision is made for slip gauges of the reference grade of accuracy in addition to the three grades: workshop, inspection, and calibration. Recommended sets of gauges are given in an appendix. For metric gauge blocks see AS 1457. (ME-027)
Specifies dimensions of involute splined shafts and holes with a 30 pressure angle. Basic formulas for calculating dimensions and tolerances are included, with guidance on obtaining the fit desired. Terms used are defined. The Standard also describes methods of gauging and inspecting splines, with methods of obtaining dimensions and tolerances for gauges. Inspection of splines using pins is covered and tables of measurements over and between pins are included. (ME-011)
36pp
Four classes of pins are specified and requirements for the chemical composition and physical properties of the material are given for sizes from 1/16 in. x 3/8 in. to 7/8 in. x 8 in. Reference is by the fractional size of the diameter of the larger end and, for convenience, a comparison of this standard method with the non-preferred method of reference by numbers is given in an appendix. The selection of suitable drill sizes is covered in a further appendix. (ME-029)
AS B1481956 Unified black hexagon bolts, screws and nuts (UNC and UNF threads) and plain washers Heavy series (BS 1769:1951) 20pp Obsolescent
Corrigendum 1 1 November 1967 Gives the dimensions and general requirements in a range of nominal sizes from to 2 in. Detailed dimensions of bolts, screws, ordinary nuts, lock nuts, slotted nuts and plain washers are given and provision is also made for bolts faced under the head and machined on the shank, and machined nuts. Formulas for the calculation of dimensions for bolts and screw heads and nuts in intermediate sizes, and sizes larger than 2 in. are given in an appendix. (ME-029)
7pp
Establishes main feature of design, general dimensions, material, finish and accuracy for a recommended series of high precision angle plates intended to carry only moderate loads. The plates are mainly used for inspection purposes. Five size-varieties are provided for. (ME-027)
75pp
AS B1081952 Black cup and countersunk bolts, nuts and washers (BS 325:1947) 16pp Obsolescent
Amendment 1 1 July 1961 Amendment 3 1 July 1962 Corrigendum 1 1 July 1967 Establishes dimensions for cup head bolts with square, oval and nibbed shanks, and countersunk headed bolts with square and nibbed shanks for use on steel work and wood work and with Whitworth threads. It includes square and hexagon nuts and a complete range of round and square washers with round and square holes. The range of nominal sizes covered is from 2 in. to 1 in. Requirements are laid down in respect of the lengths of threads and the tolerances on them, and the form of the end of the bolt shank. (ME-029)
8pp
Specifies dimensions and general requirements for finish and shape of low carbon steel and non-ferrous split cotter pins. The definition of length, for designation of split pins, is given as the length of the shorter leg. A preferred range of standard sizes in terms of diameter-length combinations is included. An appendix indicates the relationship between sizes in this Standard and in a draft ISO Recommendation. For metric pins see AS 1236. (ME-029)
Part I provides design data and other details of involute serrations of 45 pressure angle 10/20, 16/32 and 24/48 pitches for the full range 60 to 100 serrations, and 32/64, 40/80, 48/96, 64/128, 80/160 and 128/256 pitches for limited range. Limiting dimensions are tabulated and manufacturing errors and their effect on fit between mating serrated elements are discussed. Part II gives the methods of gauging and inspection, and the design details for gauges. (ME-011)
11pp
AS B1931970 Hot-dip galvanized coating on fasteners (BSW and UNC threads) 9pp Obsolescent
Covers coating on steel bolts, screws, nuts, and other fasteners, in the nominal size range of in. to 1 in. diameter inclusive. It governs the purity of the galvanizing bath, the appearance of the coating under visual examination, the weight of the coating, the uniformity and adhesion of the coating, the fit of the threads on the finished articles, and the test methods to be adopted. Particular requirements apply to the hot-dip galvanizing of high strength steel bolts for use in structural engineering. For this Standard in metric units see AS 1214. (ME-029)
Deals with basic dimensions and accuracy of vee blocks used for precision measurements. It defines a standard range of blocks capable of accommodating cylinders from 1/8 in. to 5 in. diameter. It provides for three grades of accuracy and includes some basic terms and definitions. Although basically concerned with blocks having an included angle of 90 the Standard can also be used for other angles with certain modifications of nominal dimensions affected by the change in vee angle. (ME-027)
AS B1181953 Dimensions of small rivets for general purposes (BS 641:1951) 18pp Obsolescent
Amendment 1 1 September 1961 Relates to such as snap, pan, mushroom, flat and various countersunk headed types. Nominal diameters and lengths are defined with permissible variations in shank diameters. These rivets are made from mild steel, copper, brass, a range of aluminium alloys and pure aluminium. Details of Reaper rivets are included. Tables of stock lengths are also given. Coopers' flat head rivets 4 in. diameter and below are included in an appendix. (ME-029)
AS B2941970 Plain setting rings for internal measuring equipment (inch series) 10pp Obsolescent
Covers rings for setting instruments used for precision measurement of internal diameters by two-point or threepoint contact methods, in a range of diameters from 0.08 in. to 6 in. It establishes a series of blank sizes; defines material, its heat treatment and hardness; and specifies requirements for working surface with respect to finish and accuracy. Three grades of accuracy are provided for. For metric series rings see AS 1001. (ME-027)
37pp
AS B1291968 Designs for geometric limit gauges (plain and screwed in inch units) 63pp
Describes and illustrates types and design features of commonly used gauges and specifies their main parameters and minimum quality requirements. Only the features absolutely necessary to ensure interchangeability of parts, rigidity and stability of construction and ease and reliability of gauges in use are specified, leaving further details of design to individual designers. This Standard does not specify shape and limits for gauging surfaces. In addition to general requirements and terms and definitions, six types of internal gauge and five types of external gauge are covered in 112 figures and 54 tables. (ME-027)
Relates to ferrous and non-ferrous tapping and drive screws. It establishes type and shape varieties; dimensional proportions; standard diameters and lengths and their combinations; and covers materials, accuracy, finishes and quality. Information on the application of the various types and on sizes of labels for steel screws in a variety of materials is given in an appendix. A foreword discusses the reason for selection of the standard sizes and relates the standard range to the American and Canadian Standards. (ME-029)
AS D261972 Tube fittings with Dryseal American standard taper pipe and unified threads for automotive and industrial use 48pp
Provides a range of tables covering dimensions of flared, inverted flared and compression type fittings in the range 1/8 in. to 1 in. The Standard is intended primarily for the automotive industry, but the fittings are also used extensively in other sections of industry. (ME-054)
AS B1991962 Undercuts and runouts for screw threads (BS 1936:1952) 16pp
Provides data of dimensions and profiles of machined undercuts for external and internal threads of Unified, Whitworth, BA and Cycle thread forms. Dimensions and tolerances are given for standard cutting tools for this purpose and recommendations are made for widths of undercuts and runouts for various production requirements. (ME-029)
AS D291973 Filler, drain and pipe plugs with Dryseal American standard taper pipe and unified threads for automotive and industrial use 20pp
Covers tapered filler and drain plugs, pipe plugs, and straight thread filler and drain plugs up to 1 in. for tapered thread plugs and up to 2 in. for straight thread plugs. The Standard generally corresponds with the SAE Standards for these plugs. (ME-054)
56pp
19pp
Corrigendum 1 1 September 1974 Relates to splines produced in holes or on shafts of nominal size from to 6 in., for 4, 6, 10 and 16 splines of narrow depth and 6 and 10 splines of deep depth. Dimensions and gauging data are tabulated for bottom fitting (top clearance) and top fitting (bottom clearance) splines in three classes of fit, covering conditions where minimum backlash is neces-
Specifies and illustrates basic requirements for the layout and sizes of letterheads, invoices, purchase orders, sets comprising invoice with advice of despatch and packing note, credit notes, statements of account , and remittance advices. It covers these forms whether used individually , in sets in book form, or as continuous stationery. In addition, there are notes to assist form designers on paper quality,
260
AS P51969 Punching patterns for round holes used in files and loose leaf binders 4pp
Covers standard spacings and tolerances between holes for filing, diameter of holes and distance of holes from edge of sheet. Both four-hole and two-hole punching are specified and recommendations on suitable sizes of sheets are included. (IT-008)
namely, concrete, steel, timber, and masonry structures, and residential slabs and footings. It also includes extracts from Parts 0, 1, 2 and 4 of the Loading Code. Extracts incorporate all amendments and revisions to December 2002. (B-000)
ASCRM 012A-22002 Certified reference materialCoal sample with total sulfur of 0.33%
Comprises 125 g plastics jar of coal, with analysis certificate for total sulfur and a copy of TR 2.12A-2. For use as a quality control tool and to validate methods of analysis. Available from SAI Global Rydalmere Sales Outlet only. (MN-001)
ASCRM 012C-32008 Certified reference materialCoal sample having total sulfur of approximately 1.22%
Comprises a 125g plastic jar of coal used as a quality control tool and to validate methods of analysis. Supplied with a free copy of the Technical Report, TR 2.12C-32008. Available from SAI Global Rydalmere Sales Outlet only. (MN-001)
AS CA551970 Code of recommended practice for the design and installation of bituminous fabric roofing 40pp Obsolescent
Provides detailed recommendations for selection from a range of bituminous fabrics, and describes methods of designing and installing this fabric in order to form a durable waterproof roofing membrane. Appendices cover surfacing treatment to prevent deterioration due to photo-oxidation, and details of flashing procedures, and also provide roof drainage data. (BD-013)
ASCRM 012D-21998 Certified reference materialCoal sample having total sulfur of 5.21%
Comprises 125 g plastic jar of coal, with analysis certificate for total sulfur and copy of TR 2.12D-2. For use as a quality control tool and to validate methods of analysis. Available from SAI Global Rydalmere Sales Outlet only. (MN-001)
Includes extracts from 30 Australian Standards relevant to the three year plumbing trade course. (WS-000)
311pp
Reference Materials
ASCRM 002-11997 Certified reference materialFloat glassFor use in determining abradability index by AS 1774.23.1
Comprises 6 mm float glass pieces certified for mass loss when tested in accordance with AS 1774.23.1. Packaged in lots of five. A copy of TR 2.2:1997 is included with every ASCRM 002-1 purchased. Available from SAI Global Rydalmere Sales Outlet only. (MN-007)
Contains information on technical drawing practice based on Australian Standards. Provides a background and an explanation of the Standards, as well as details on drafting equipment and techniques. A guide for students and practitioners on technical drawing. Published in conjunction with the Institution of Engineers, Australia.
178pp
ASCRM 002-21999 Certified reference materialFloat glassFor use in determining abradability index by AS 1774.23.2
Comprises 10 mm float glass pieces certified for mass loss when tested in accordance with AS 1774.23.2. Packaged in lots of five. Available from SAI Global Rydalmere Sales Outlet only. (MN-007)
Handbooks
HB 1:1994 Technical drawing for students 78pp
This Handbook provides guidance for occupational hygienists, and other occupational health and safety practitioners, training personnel, workshop and laboratory supervisors, industrial relations officers, union officials, members of occupational health and safety committees, students in occupational health and safety courses and other persons concerned with occupational personal protection. This edition refers to more than 50 Australian Standards, as well as many other international and overseas Standards. It has been expanded to include additional chapters on general principles for personal protection and the identification of common hazards likely to be encountered in the workplace as well as general control measures for their reduction. It also takes account of less common hazards such as ionizing and non-ionizing forms of radiation. Existing material dealing with the use of personal protective equipment for the prevention of injury to the whole body or individual parts such as head, eye, limb and respiratory system has been revised to take account of increased knowledge and changing technology. (SF-018)
Provides a guide to drawing practice primarily for students and educators. An abridgement of AS 1100.101 with additional material from AS 1100.201 and AS 1101.3. (ME-072)
137pp
HB 2 Australian Standards for civil engineering students HB 2.11998 Materials and testing 509pp
Lists designations of metals and alloys standardized in current overseas Standards and equates these to their possible Australian counterparts in terms of chemical composition. Tables through the text list Australian Standard metals and alloys, whilst appendices list all Australian and overseas Standards referenced in the Handbook. (MT-001)
Contains extracts from Standards covering properties and testing of cement, aggregates, concrete and soils, and also deals with geotechnical site investigations and conditions of contract. (B-000)
665pp
Amendment 1 28 March 2003 Amendment 2 23 July 2004 Contains extracts from Standards covering strucutral design method for the principal-material tructrues
HB 151988 Chemical analysis indexA keyword listing of methods described or cited in Australian Standards (Chemdex) 440pp
Provides access to chemical analysis information by three routes-(a) by constituent or characteristic sought, (b) by matrix or parent material, and (c) by reference document num-
261
HB 171996
ber. Cites the range of applicability of each method (if known) and provides keyword descriptors of test method. Includes constituents specified in product Standards whether or not methods of test are cited. Targeted for libraries, regulatory authorities/laboratories, tertiary and research institutions, and contracting parties. (CH-023) ing laboratory accreditation systems. Identical with SANZ HB18.271991 and produced as a Joint Australian/New Zealand Standard. (QR-010) Guidance is given on the establishment, general requirements for, and operation of calibration and testing laboratory accreditation systems. Identical with SANZ HB18.531991 and produced as a Joint Australian/New Zealand Standard. (QR-010)
19pp
Provides guidance which is applicable to a third-party product certification system for determining the conformity of a product with specified requirements by assessment and surveillance of the quality system and testing of samples of the product. Identical with and reproduced from ISO/IEC Guide 28:2004. (QR-010)
HB 18.551991 Guide 55Testing laboratory accreditation systemsGeneral recommendations for operation (ISO/IEC Guide 55:1988) 4pp
Identical to the ISO/IEC guides and provides information on product and third-party certification systems. Guidance is given on the establishment, general requirements for, and operation of calibration and testing laboratory accreditation systems. Identical with SANZ HB18.551991 and produced as a Joint Australian/New Zealand Standard. (QR-010)
HB 18.281991 Guide 28General rules for a model thirdparty certification system for products (ISO/IEC Guide 28:1982) 16pp Available Superseded
Identical to the ISO/IEC guides and provides information on product and third-party certification systems. Guidance is given on the establishment, general requirements for, and operation of calibration and testing laboratory accreditation systems. Identical with SANZ HB18.281991 and produced as a Joint Australian/New Zealand Standard. (QR-010)
HB 18 Guidelines for third-party certification and accreditation HB 18.2:2003 Standardization and related activities General vocabulary (ISO/IEC Guide 2:1996) 35pp Available Superseded
Specifies general terms and definitions concerning standardization and related activities. It is identical with and reproduced from ISO/IEC Guide 2:1996. (QR-010)
HB 18.561991 Guide 56An approach to the review by a certification body of its own internal quality system (ISO/IEC Guide 56:1989) 4pp
Identical to the ISO/IEC guides and provides information on product and third-party certification systems. Guidance is given on the establishment, general requirements for, and operation of calibration and testing laboratory accreditation systems. Identical with SANZ HB18.561991 and produced as a Joint Australian/New Zealand Standard. (QR-010)
HB 18.421991 Guide 42Guidelines for a step-by-step approach to an international certification system (ISO/IEC Guide 42:1984) 6pp
Identical to the ISO/IEC guides and provides information on product and third-party certification systems. Guidance is given on the establishment, general requirements for, and operation of calibration and testing laboratory accreditation systems. Identical with SANZ HB18.421991 and produced as a Joint Australian/New Zealand Standard. (QR-010)
HB 18.7:1994 Guide 7Guidelines for drafting of Standards suitable for use for conformity assessment (ISO/IEC Guide 7:1994) 3pp
Provides guidelines to assist technical committees in drafting Standards suitable for use in conformity assessment of products. Identical with ISO/IEC Guide 7:1994. (QR-010)
HB 18.58:1993 Guide 58Calibration and testing laboratory accreditation systemsGeneral requirements for operation and recognition (ISO/IEC Guide 58:1993) 6pp
Identical to the ISO/IEC Guides and provides information on product and third-party certification systems. Guidance is given to the establishment, general requirements for, and operation of calibration and testing laboratory accreditation systems. (QR-010)
HB 18.161991 Guide 16Code of principles on thirdparty certification systems and related Standards (ISO/IEC Guide 16:1978) 4pp
Identical to the ISO/IEC guides and provides information on product and third-party certification systems. Guidance is given on the establishment, general requirements for, and operation of calibration and testing laboratory accreditation systems. Identical with SANZ HB18.161991 and produced as a Joint Australian/New Zealand Standard. (QR-010)
HB 18.43.1:1998 Guide 43Proficiency testing by interlaboratory comparisonsPart 1: Development and operation of proficiency testing schemes (ISO/IEC Guide 43-1:1997) 16pp
Defines those principles that need to be considered when organizing interlaboratory comparisons and describes the factors that should be taken into account in the organization and conduct for proficiency testing schemes. Identical with and reproduced from ISO/IEC Guide 43-1:1997. (QR-010)
5pp
Recommends good practices for all elements of conformity assessment, including normative documents, bodies, systems, schemes and results. Identical with and reproduced from ISO/IECGuide 60: 2004. (QR-010)
HB 18.22:2003 General criteria for supplier's declaration of conformity (ISO/IEC Guide 22:1996) 4pp
Specifies general criteria for a supplier's declaration of conformity in cases where it is desirable, or necessary, that conformity of a product, process or service to normative documents be indicated, irrespective of the sector involved. The supplier may then declare under his/her responsibility the conformity to normative documents. (QR-010)
HB 18.43.2:1998 Guide 43Proficiency testing by interlaboratory comparisonsPart 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997) 3pp
Describes how laboratory accreditation bodies who assess technical competence of laboratories should select and use proficiency testing schemes. Provides a harmonized model for selection and use of such schemes. Identical with and reproduced from ISO/IEC Guide 43-2:1997. (QR-010)
HB 18.60:1995 Guide 60Code of good practice for conformity assessment (ISO/IEC Guide 60:1994) 2pp Available Superseded
Provides a code of practice for conformity assessment and related activities which is intended to promote freedom of trade through equality of access to conformity assessment services, including third-party assessment; presented in a form suitable for use by accreditation and conformity assessment bodies, whether governmental or non-governmental, at international, regional, national or local level. (QR-010)
HB 18.231991 Guide 23Methods of indicating conformity with Standards for third-party certification systems (ISO/IEC Guide 23:1982) 4pp
Identical to the ISO/IEC guides and provides information on product and third-party certification systems. Guidance is given on the establishment, general requirements for, and operation of calibration and testing laboratory accreditation systems. Identical with SANZ HB18.231991 and produced as a Joint Australian/New Zealand Standard. (QR-010)
HB 18.441991 Guide 44General rules for ISO or IEC international third-party certification schemes for products (ISO/IEC Guide 44:1985) 13pp
Identical to the ISO/IEC guides and provides information on product and third-party certification systems. Guidance is given on the establishment, general requirements for, and operation of calibration and testing laboratory accreditation systems. Identical with SANZ HB18.441991 and produced as a Joint Australian/New Zealand Standard. (QR-010)
HB 18.61:1996 Guide 61General requirements for assessment and accreditation of certification/registration bodies (ISO/IEC Guide 61:1996) 11pp
Provides general requirements for bodies operating accreditation systems; intended to promote equivalence of national systems and facilitate mutual recognition between such bodies which are concerned with the recognition of competence. Identical with and reproduced from ISO/IEC Guide 61. (QR-010)
21pp
HB 18.271991 Guide 27Guidelines for corrective action to be taken by a certification body in the event of either misapplication of its mark of conformity to a product, or products which bear the mark of the certification body being found to subject persons or property to risk (ISO Guide 27:1983) 5pp
Identical to the ISO/IEC guides and provides information on product and third-party certification systems. Guidance is given on the establishment, general requirements for, and operation of calibration and test-
Outlines a general approach by which certification bodies can develop and apply product certification schemes utilizing requirements of an organization quality management system. Identical with and reproduced from ISO/IEC Guide53: 2005. (QR-010)
HB 18.62:1996 Guide 62General requirements for bodies operating assessment and certification/registration of quality systems (ISO/IEC Guide 62:1996) 11pp
Provides requirements which, if observed, are intended to ensure that certification bodies operate thirdparty certification/registration systems in a consistent and reliable manner, thereby facilitating their acceptance on a national and international basis. Identical with and reproduced from ISO/IEC Guide 62. (QR-010)
HB 18.531991 Guide 53An approach to the utilization of a suppliers' quality system in thirdparty product certification (ISO/IEC Guide 53:1988) 13pp Available Superseded
Identical to the ISO/IEC guides and provides information on product and third-party certification systems.
262
HB 32:1995 Control of microbial growth in air-handling and water systems of buildings 47pp
Provides guidance for microbial control of both airhandling and water systems of buildings. The Handbook is intended to provide users with additional information to support the specific requirements of AS/NZS 3666 Parts 1 and 2 (1995).
HB 18.662004 Guide 66General requirements for bodies operating assessment and certification/registration of environmental management systems (EMS) (ISO/IEC Guide 66:1999) 14pp
Provides third party bodies operating EMS certification or registration with general requirements, which if the body is compliant with, may be recognized as competent. Identical with and reproduced from ISO/IECGuide 66:1999. (QR-010)
HB 37 Handbook of Australian fire Standards HB 37.01995 Fire test StandardsPreparation, application and format 14pp
Provides guidelines on the preparation and application of fire test methods and fire Standards. (FP-018)
9pp
Provides guidance on product certification systems by identifying their various elements based on current practice. Intended for use by product certification bodies and other interested parties wishing to understand, develop, establish or compose third-party product certification systems. Identical with and reproduced from ISO/IEC Guide67:2004. (QR-010)
HB 37.11993 FireGeneral
17pp
HB 18.682004 Guide 68Arrangements for the recognition and acceptance of conformity assessment results (ISO/IEC Guide 68:2002) 8pp
Provides a basis for conformity assessment bodies and accreditation bodies to have confidence in the work of similar bodies in other countries. It applies to the development, issuance and operation of arrangements for recognition and acceptance of product, services and systems results. It does not apply to special governmental requirements. Identical with and reproduced from ISO/IEC Guide 68:2002. (QR-010)
Summarises information on fire, fire tests and flammability, referring to appropriate Australian Standards. This part, dealing with general information on fire matters, is the first section of a multi-part handbook. (FP-018)
42pp
Describes computer virus basics and provides information to allow for the development of a sound protection strategy. This handbook is intended primarily for the home or small business PC user. (IT-001)
20pp
Provides a summary of information on fire, tests and flammability relevant to electrical equipment, referring to appropriate Australian Standards. (FP-018)
HB 19 Reference materials HB 19.301991 Guide 30Terms and definitions used in connection with reference materials (ISO Guide 30:1981) 5pp
These handbooks are identical to the ISO guides and provide guidance on terminology, the purpose and use of reference materials, the preparation of certificates and the role of certified reference materials. (CH-040)
30pp
Provides a summary of information on fire tests and flammability relevant to textile materials and textile products, referring to Australian Standards. (FP-018)
HB 19.311991 Guide 31Contents of certificates of reference materials (ISO Guide 31:1981) 8pp
These handbooks are identical to the ISO guides and provide guidance on terminology, the purpose and use of reference materials, the preparation of certificates and the role of certified reference materials. (CH-040)
HB 391997 Installation code for metal roof and wall cladding 120pp
Provides information and guidelines on the selection, performance and installation of metal roofing and wall cladding. The code represents a standard of good practice agreed between manufacturers, roofing contractors and training authorities. The measures contained in this code will provide a weatherproof exterior and ensure that all rainwater is directed to the stormwater drainage system. (B-000)
HB 19.331991 Guide 33Uses of certified reference materials (ISO Guide 33:1989) 14pp
These handbooks are identical to the ISO guides and provide guidance on terminology, the purpose and use of reference materials, the preparation of certificates and the role of certified reference materials. (CH-040)
HB 40 Set2005 Australian Refrigeration and Air-conditioning Code of Good Practice Set HB 40 The Australian Refrigeration and Airconditioning Code of Good Practice HB 40.12001 Reduction of emissions of fluorocarbon refrigerants in commercial and industrial refrigeration and air-conditioning applications 38pp
This Handbook covers all systems classifiable as commercial and industrial refrigeration and airconditioning systems, including heat pumps which use fluorocarbon refrigerants. (B-000)
HB 19.351991 Guide 35Certification of reference materialsGeneral and statistical principles (ISO Guide 35:1985) 28pp
These handbooks are identical to the ISO guides and provide guidance on terminology, the purpose and use of reference materials, the preparation of certificates and the role of certified reference materials. (CH-040)
HB 312002 Handbook of building construction tolerancesExtracts from building products and structural Standards 66pp
Contains selected extracts from building Standards, which relate to tolerances for various building techniques, for the purpose of providing persons involved in building design and construction industries with easy reference to information regarding these tolerances. (BD-069)
263
HB 40.22001
HB 40.22001 Reduction of emissions of fluorocarbons in residential air-conditioning applications 24pp
This Handbook covers air-conditioning systems primarily designed for domestic use, and has been developed with the intention of reducing emissions of flurocarbon refrigerants into the atmosphere. (B-000) Comprises pads of widely used proforma notices issued in the administration of a contract under AS 21241992. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010) Framing Code and the subsequent Amendments. It is one in a series of four check sheets: 28 m/s sheet roof, 28 m/s or 33 m/s tiled roof, 33 m/s sheet roof or 41 m/s tiled roof, and 41 m/s sheet roof. Compliance with the check sheets will achieve compliance with the Code. (TM-002)
HB 42 Supplement 71993 General conditions of contract (AS 2124 1992)User guideContractor's claim for extension of time (days stated)Proforma notice (Supplement to SAA HB421992) 3pp
Comprises pads of widely used proforma notices issued in the administration of a contract under AS 21241992. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
HB 44 Supplement 21995 A Guide to the Timber Framing Code Standard fixing and tie-down requirements 28 m/s or 33 m/s tiled roofTie-down check sheet 1st edition
Provides development and extension of the fixing and tiedown requirements in AS 16841992: National Timber Framing Code and the subsequent Amendments. It is one in a series of four check sheets: 28 m/s sheet roof, 28 m/s or 33 m/s tiled roof, 33 m/s sheet roof or 41 m/s tiled roof, and 41 m/s sheet roof. Compliance with the check sheets will achieve compliance with the Code. (TM-002)
HB 42 Supplement 81993 General conditions of contract (AS 2124 1992)User guideSuperintendent's grant of extension of timeProforma notice (Supplement to SAA HB421992) 3pp
Comprises pads of widely used proforma notices issued in the administration of a contract under AS 21241992. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
HB 44 Supplement 31995 A Guide to the Timber Framing Code Standard fixing and tie-down requirements 33 m/s sheet or 41 m/s tiled roof materialTiedown check sheet 1st edition
Provides development and extension of the fixing and tiedown requirements in AS 16841992: National Timber Framing Code and the subsequent Amendments. It is one in a series of four check sheets: 28 m/s sheet roof, 28 m/s or 33 m/s tiled roof, 33 m/s sheet roof or 41 m/s tiled roof, and 41 m/s sheet roof. Compliance with the check sheets will achieve compliance with the Code. (TM-002)
HB 42 Supplement 11993 General conditions of contract (AS 2124 1992)User guideContractor's set of proforma notices (Supplement to SAA HB42 1992) 50pp
Comprises a pad of proforma notices which are issued by the Contractor in the administration of a contract under AS 21241992. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
HB 42 Supplement 91993 General conditions of contract (AS 2124 1992)User guideRequest to price proposed variationProforma notice (Supplement to SAA HB421992) 3pp
Comprises pads of widely used proforma notices issued in the administration of a contract under AS 21241992. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
HB 44 Supplement 41995 A Guide to the Timber Framing Code Standard fixing and tie-down requirements 41 m/s sheet roofJD4 framing materialTiedown check sheet 1st edition
Provides development and extension of the fixing and tiedown requirements in AS 16841992: National Timber Framing Code and the subsequent Amendments. It is one in a series of four check sheets: 28 m/s sheet roof, 28 m/s or 33 m/s tiled roof, 33 m/s sheet roof or 41 m/s tiled roof, and 41 m/s sheet roof. Compliance with the check sheets will achieve compliance with the Code. (TM-002)
HB 42 Supplement 21993 General conditions of contract (AS 2124 1992)User guidePrincipal's set of proforma notices (Supplement to SAA HB421992) 27pp
Comprises a pad of proforma notices which are issued by the Principal in the administration of a contract under AS 21241992. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
HB 42 Supplement 101993 General conditions of contract (AS 2124 1992)User guideRequest for variation quotationProforma notice (Supplement to SAA HB421992) 3pp
Comprises pads of widely used proforma notices issued in the administration of a contract under AS 21241992. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
32pp
HB 42 Supplement 31993 General conditions of contract (AS 2124 1992)User guideSuperintendent's set of proforma notices (Supplement to SAA HB42 1992) 27pp
Comprises a pad of proforma notices which are issued by the Superintendent in the administration of a contract under AS 21241992. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
HB 42 Supplement 111993 General conditions of contract (AS 2124 1992)User guidePayment certificate Proforma notice (Supplement to SAA HB42 1992) 3pp
Comprises pads of widely used proforma notices issued in the administration of a contract under AS 21241992. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
Provides occupants with the recommendations representative of the measures that can be taken, and the equipment that is available, to enhance the fire and life safety features of the dwelling they inhabit.
118pp
HB 42 Supplement 41993 General conditions of contract (AS 2124 1992)User guideNotice of ambiguity or discrepancy in the contract documents Proforma notice (Supplement to SAA HB42 1992) 3pp
Comprises pads of widely used proforma notices issued in the administration of a contract under AS 21241992. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
Provides background, explanation and supplementary information to the dimensioning and tolerancing requirements of two technical drawing Standards, AS 1100.101, General principles, and AS 1100.201, Mechanical engineering drawing. The Handbook has numerous, practical comments and examples to assist practitioners and students. (B-000)
199pp
This Handbook provides guidelines for road safety audits intended to be conducted either during the design or the construction phase of a new road or traffic management treatment, or as part of the management process for existing roads. It provides, firstly, a background to road safety audit which includes an explanation of the process, its aims and objectives and its relationship to quality management and legal issues. The main thrust of the document is a complete set of detailed procedures for the conduct of an audit, together with case studies and check lists covering a variety of audit situations. This is a joint publication with Austroads. (CE-006)
129pp
Provides background information and guidance on the use of AS 4100 and permits the lower tier analysis of less complex steel structures to be carried out with minimal design aids and a hand-held calculator. (B-000)
HB 42 Supplement 51993 General conditions of contract (AS 2124 1992)User guideContractor's notice of delayProforma notice (Supplement to SAA HB421992) 3pp
Comprises pads of widely used proforma notices issued in the administration of a contract under AS 21241992. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
HB 441993 Understanding the Timber Framing Codea guide to AS 16841992 The National Timber Framing Code 120pp
Amendment 1 5 June 1995 Provides detailed guidance and numerous worked examples on the use of AS 1684National Timber Framing Code. Particular attention is paid to the requirements for bracing and tie-down. A joint publication with the Timber Development Association of South Australia. (TM-002)
Provides extracts from Australian Standards and AUSFAC (Australian Sport and Recreation Facilities Advisory Committee) publications setting out the major requirements for sports lighting. It covers the general principles of sports lighting, specific lighting recommendations for different sports, and a guide to calculating the floodlighting requirements for different sports facilities. A joint publication with AUSFAC. (LG-009)
9pp
HB 42 Supplement 61993 General conditions of contract (AS 2124 1992)User guideContractor's notice of delay and claim for extension of time (days stated)Proforma notice (Supplement to SAA HB421992) 3pp
HB 44 Supplement 11995 A Guide to the Timber Framing Code Standard fixing and tie-down requirements 28 m/s sheet roofTie-down check sheet 1st edition
Provides development and extension of the fixing and tiedown requirements in AS 16841992: National Timber
Provides extracts from Australian Standards setting out the major requirements for synthetic sports surfaces. It covers the types of synthetic sporting surfaces, the subfloors and surface selection. A joint publication with AUSFAC. (LG-009)
264
374pp
Defines terms used in the building and construction industry. Assists in all areas of the building and construction industry, including designers, builders, producers and suppliers, information managers, regulators, technicians and tradesmen, and students to find appropriate terms and definitions for their work. Published in conjunction with the National Committee on Rationalised Building. (B-000)
50pp
Provides a guide to good practice on all aspects of concreting activities on building sites. Gives advice on forming, reinforcing, handling, placing, compacting, finishing and curing of concrete. Intended for use by site foremen and leading hands and for students in building construction courses. Published in conjunction with Cement and Concrete Association of Australia and endorsed by Master Builders Australia. (BD-002)
HB 68:1995 Information technologyOpen Systems InterconnectionTutorial on naming and addressing (ISO/IEC TR 10730:1993) 35pp
Provides the main concepts and mechanisms to fulfil the needs for naming and addressing objects in the open systems interconnection environment. This Handbook is identical with and has been reproduced from ISO/IEC TR 10730:1993. (IT-001)
HB 54 Supplement 11994 Subcontract conditions (AS 25451993)User guideMain contractor's set of proforma notices (Supplement to SAA HB 541994) 23pp
Comprises a pad of proforma notices which are issued by the Main Contractor in the administration of a subcontract under AS 25451993. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
24pp
HB 54 Supplement 21994 Subcontract conditions (AS 25451993)User guideMain contractor's representative's set of proforma notices (Supplement to SAA HB 541994) 27pp
Comprises a pad of proforma notices which are issued by the Main Contractor's Representative in the administration of a Subcontract under AS 25451993. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
Provides information to Government agencies and other interested bodies regarding the recommended approach to implementing the Australian Government GOSIP policy within normal procurement activities. Also included is information on the use of the register of OSI consultants, the register of OSI equipment and subprofile conformance information in the Common Use Contract Buyers' Guides. (S-000)
HB 69 Guide to traffic engineering practice HB 69.122004 Roadway Lighting HB 69.131995 Pedestrians 37pp
(E-000)
78pp
Provides guidance to information technology planners and network managers implementing new networks in the areas of general network management for data networks including OSI and SNMP, and presents overviews of the role of systems management as it relates to network management with respect to emerging standards and architectures.
90pp
HB 54 Supplement 31994 Subcontract conditions (AS 25451993)User guideSubcontractor's set of proforma notices (Supplement to SAA HB 541994) 51pp
Comprises a pad of proforma notices which are issued by the Main Subcontractor in administration of a Subcontract under AS 25451993. The forms are in duplicate or triplicate, as appropriate, printed on self-carbon paper and supplied with a backing sheet. (MB-010)
54pp
Provides guidance on issues of security policy, system security, OSI security, existing network security, GOSIP security and planning.
This Handbook provides a comprehensive guide to the needs and requirements of pedestrians. It includes standards and guidelines for walkways and footpaths, road crossing facilities, signposting for the control and guidance of pedestrians, and for treatments relating to access to public transport, past works sites and to parking areas. Appendices cover requirements for people with disabilities and pedestrian safety audit. This is a joint publication with Austroads and forms one part of a 14 part series. (MS-012)
HB 69.141999 Bicycles
172pp
750pp
Contains the six volumes of the United Kingdom Government OSI Profile Specification (Version 4) sometimes known as the Supplier Set. Contains details of many of the profiles referred to within the ANZ GOSIP 3. Volumes are not available separately from Standards Australia. (S-000)
Contains the requirements for the conformance to each GOSIP subprofile and for the support of each GOSIP functional component. (S-000)
HB 571994 User's manual for lump sum contract based on AS 21241992 245pp
Provides an introduction to contract law and contract administration principles applicable to all parties involved in the contracting process; guidelines and commentary on preparing and administering a contract incorporating AS 21241992; and proforma notices for use under AS 2124 1992. Published in conjunction with National Public Works Council. (MB-010)
This Handbook provides a comprehensive guide to the planning, geometric design and implementation of bicycle facilities both on- and off-road. It includes guidelines for the provision of bicycle lanes on roads and freeways, and bicycle paths or paths used jointly with pedestrians, either adjacent to roads or on separate alignment. Guidance includes the signposting, pavement marking and lighting of bicycle facilities. Appendices cover requirements for safety at works on bicycle facilities and bicycle safety audit. This is a joint publication with Austroads and forms one part of a 14-part series. (MS-012)
116pp
Provides an introduction to the technical composition of each GOSIP subprofile. Each of the subprofiles are described as follows: protocols and services; network components; basic and enhanced functions. (S-000)
24pp
HB 591994 ErgonomicsThe human factorA practical approach to work systems design 56pp
Provides basic guidance to the principles of ergonomics. This Handbook deals with human physical capabilities, and physiological and work organizational factors. The section dealing with physiological factors covers displays and controls, recommendations for dimensions and actuating forces, hearing and noise, vision, lighting, vibration and activities in thermal environments. It also includes a section dealing with organizational factors and their effects on performance. It is not intended for use as a definitive reference source. (SF-021)
Contains a comprehensive listing of all the Standards and other documents on which the ANZ GOSIP 3 is based. (S-000)
Sets out the policy behind the adoption of a quality management system for the construction of domestic housing, generally based on AS/NZS ISO 9000. Includes provision for contracts, specifications and drawings, together with management responsibility, corrective and preventative action and control of quality records. Intended to be retained by the client (owner). (B-000)
42pp
Provides an introduction to the Australian/New Zealand Government OSI Profile (GOSIP) and Version 3, includes information relating to the objectives and structure of GOSIP as well as the GOSIP policy and the relationship between ANZ GOSIP 3 and other OSI profiles. (S-000)
HB 631994 Home insulation in AustraliaRecommended insulation levels for all States as per Australian Standard AS 2627.1 44pp
Provides maps for all States and Territories showing recommended insulation levels (R-values) for walls and ceilings in domestic houses. Based on AS 2627.11993. A Joint publication with FARIMA. (EN-003)
220pp
Provides a guide to the materials, manufacture, testing and properties of concrete. Gives details of the techniques and
265
HB 73.12005
planation of the structural principles involved and, where appropriate, the derivation of the form in which the aid is presented. Published in conjunction with the Cement and Concrete Association of Australia. (BD-002) represents the cooperative arrangement with Austroads. (B-000) tion represents the cooperative arrangement with Austroads. (B-000)
HB 77.1 Supplement 11996 GeneralCommentary (Supplement to SAA HB77.11996) (AP-15.1A/1992) 8pp Available Superseded
Explains and augments SAA HB77.11996, clause by clause, guiding the user in its application. The publication represents the cooperative arrangement with Austroads. (B-000)
HB 77.61996 Steel and Composite Construction Code (AP-15.6/1996) 279pp Available Superseded
Provides for the design of structural steelwork in bridges including steel girders, steel piers, steel railings, sign structures and the steel and cast steel components of bridge bearings. Also provides for the design of composite steel and concrete members. The publication represents the cooperative arrangement with Austroads and the Australasian Railways Association. (B-000)
Contains general information and Standards dealing with painting; includes AS/NZS2310, AS/NZS 2311, AS/NZS 2312 and the numerical index to APASSpecifications. (CH-003)
532pp
Provides a composite collection of the AS and AS/NZS 1580 series of laboratory test methods and the AS 3894 series of the site test methods for paints and coatings. (CH-003)
19pp
Provides the design loads, forces and effects and their combination for bridge design. The publication represents the cooperative arrangement with Austroads. (B-000)
453pp
Provides a composite collection of the AS/NZS 3750 series of Standards and other product Standards for industrial paints used on steel structures. (CH-003)
HB 77.2 Supplement 11996 Design loadsCommentary (Supplement to SAA HB77.21996) (AP-15.2A/1992) 8pp Available Superseded
Explains and augments SAA HB77.21996 clause by clause, guiding the user in its application. The publication represents the cooperative arrangement with Austroads. (B-000)
HB 77.6 Supplement 11996 Steel and Composite Construction Commentary (Supplement to SAA HB77.61996) (AP-15.6A/1996) 53pp Available Superseded
Explains and augments SAA HB77.61996, clause by clause, guiding the user in its application. The publication represents the cooperative arrangement with Austroads and the Australasian Railways Association. (B-000)
448pp
Provides a composite collection of the AS 3730 series of guides to the properties of architectural paints. (CH-003)
22pp
Provides a guide to security to users of EDI messaging using X.400 protocols. (IT-001)
19pp
28pp
18pp
Describes the concepts and principles of teleconferencing and provides an introduction to the technology involved in teleconferencing, the equipment that is used and the procedures for setting up a teleconference. (E-000)
Provides for geotechnical, site and laboratory investigation and design of shallow footings, pile footings, substructures and retaining walls for permanent vehicular and pedestrian bridges, culverts and subways of conventional size and form and the design of footings for road furniture such as lighting poles and sign support structures. The publication represents the cooperative arrangement with Austroads. (B-000)
Provides a procedure for rating of existing bridges to define their safe capacity for carrying repeated live loading for their service life. The publication represents the cooperative arrangement with Austroads and the Australasian Railways Association. (B-000)
HB 77.7 Supplement 11996 Rating CodeCommentary (Supplement to SAA HB77.71996) (AP-15.7A/1996) 16pp Available Superseded
Explains and augments SAA HB77.71996, clause by clause, guiding the user in its application. The publication represents the cooperative arrangement with Austroads and the Australasian Railways Association. (B-000)
HB 76 (SET 50)2004 Dangerous goodsInitial emergency response guide (50 copies) HB 76 (SET 100)2004 Dangerous goodsInitial emergency response guide (100 copies) HB 76 (SET 500)2004 Dangerous goodsInitial emergency response guide (500 copies) HB 76 (SET 1000)2004 Dangerous goodsInitial emergency response guide (1000 copies) HB 762004 Dangerous goodsInitial emergency response guide 277pp
Provides emergency response information for dealing with accidents, spills, leaks or fires involving dangerous goods. Information on hazards, protective clothing and emergency procedures is given. This Handbook may be used with the transport or storage of dangerous goods as listed in the 6th edition of the ADG Code and the 13th edition of the UN Orange book. The lists of UN Numbers and Shipping names correspond with those in the aforementioned documents, and are referenced to the appropriate emergency response guides. (CH-009)
HB 77.3 Supplement 11996 FoundationsCommentary (Supplement to SAA HB77.31996) (AP-15.3A/1992) 52pp Available Superseded
Explains and augments SAA HB77.31996 clause by clause, guiding the user in its application. The publication represents the cooperative arrangement with Austroads. (B-000)
HB 77.81996 Railway Supplement (Sections 1-5) Code (AP-15.S/1996) 49pp Available Superseded
Provides the articles which are new or involve modifications or additions to Parts 1 to 5 of the Australian Bridge Design Code to cover specific issues relevant to railway underbridges and impact from railway vehicles. The publication represents the cooperative arrangement with Austroads and the Australasian Railways Association. (B-000)
14pp
Provides the design and performance requirements of bearing and deck joints for the articulation, guidance and accommodation of movements of bridge structures. The publication represents the cooperative arrangement with Austroads. (B-000)
HB 77.4 Supplement 11996 Bearings and Deck JointsCommentary (Supplement to SAA HB77.41996) (AP-15.4A/1992) 18pp Available Superseded
Explains and augments SAA HB77.41996 clause by clause, guiding the user in its application. The publication represents the cooperative arrangement with Austroads. (B-000)
HB 77.8 Supplement 11996 Railway Supplement (Sections 1-5) Code Commentary (Supplement to SAA HB77.81996) (AP-15.SA/1996) 51pp
Provides those commentary articles which are new or relate to modifications or additions to the supplements to Part 1 to 5 of the Australian Bridge Design Code to cover specific issues relevant to railway underbridges and impact from railway vehicles. The publication represents the cooperative arrangement with Austroads and the Australian Railways Association. (B-000)
HB 77 Australian Bridge Design Code HB 77.01996 Conversion and list of parts Available Superseded 2pp
91pp
HB 791996 Alkali Aggregate reactionGuidelines on Minimising the Risk of Damage to Concrete Structures in Australia 31pp
Provides guidelines for the assessment of the risk of damage to concrete structures due to alkali aggregate reactions and the appropriate strategies to minimize that risk. Also provides an overview of alkali aggregate in concrete. (B-000)
Provides details of the conversion of the 1992 Austroads Bridge Design Code, Sections 1 to 5, to Standards Australia Handbooks and lists the parts of the Bridge Design Code. (B-000)
Provides for the design and construction of concrete bridges and associated structures including members which contain reinforcing steel and tendons, or both. Also provides for plain concrete members. The publication represents the cooperative arrangement with Austroads. (B-000)
8pp
Provides the general water and flood, geometric, traffic barriers and drainage principles of design. Published in conjunction with Austroads. The publication
HB 77.5 Supplement 11996 ConcreteCommentary (Supplement to SAA HB77.51996) (AP-15.5A/1992) 82pp Available Superseded
Explains and augments SAA HB77.51996, clause by clause, guiding the user in its application. The publica-
HB 80:1996 Benchmarking ExplainedA Guide for Undertaking and Implementing Benchmarking 16pp
This Handbook provides a basic introduction to benchmarking. It explains the basic concepts, describes the different types of benchmarking and briefly discusses benchmarking techniques. The reasons for benchmarking are also discussed, as well as some indication on how to use the results. (A-000)
266
45pp
This Handbook comprises an illustrated plain English field guide intended for both the training of, and use in the field by, junior supervisory personnel involved in short-term roadworks on freeways, expressways, motorways, tollways and like facilities. This Handbook includes 9 full-page, full-colour perspective-style drawings of typical works situations in A5 landscape format. (MS-012)
HB 81.8 (Set)2003 Long-term partial closures and detours on urban roads, Set
Set includes 10 copies of HB 81.82000 at a discounted price.
HB 871997 (CJC 1) Joint use of poles: The placement on poles of power lines and paired cable telecommunications lines 42pp
Sets out, in two Parts, the conditions as agreed between ESAA and Telstra Corporation whereby the poles of an electricity supply utility, or Telstra, may be jointly used by both parties. Part A sets out general administrative and financial conditions and procedures. Part B specifies engineering conditions for normal and special joint use, also maintenance and safe working conditions. (ET-007)
HB 881997 (CJC 2) Unbalanced high voltage power lines: Code of practice for the mitigation of noise induced into paired cable telecommunications lines from unbalanced high voltage power lines 21pp
Specifies cooperative measures for the mitigation of noise induced into paired cable telecommunications lines from unbalanced HV power lines, particularly single-wire earthreturn (SWER), multiple earthed neutral (MEN), singlephase and two-phase (120) lines. Sections cover engineering principles of interference generation, maximum values and mitigation measures; responsibilities for system separation and correction of interference; and procedures for new installations. (ET-007)
HB 81.9 (Set)2003 Long-term partial closures and detours on rural roads, Set
Set includes 10 copies of HB 81.92000 at a discounted price.
HB 90 The ISO 9001 Comparison2000 vs 1994 HB 90.0:2000 The ISO 9001 Comparison2000 vs 1994 70pp
This Handbook provides a side-by-side comparison of the differences between the 2000 and the 1994 editions of ISO 9001, to assist those who wish to understand the differences between the two versions. Because of the differences in the structure of the two versions of the Standard, some of the clauses (or parts of the clauses) of the 1994 edition are mapped against two or more clauses of the 2000 version. (QR-008)
49pp
This Handbook comprises an illustrated plain English field guide intended for both the training of, and use in the field by, junior supervisory personnel involved in short-term night-time roadworks extending for no more than one night. The Handbook includes 10 fullpage, full-colour, perspective-style drawings of typical works situations in A5 landscape format. (MS-012)
HB 90.1 Set2006 165pp HB 90.12000 The Small Business HandbookGuide to ISO 9001:2000 142pp
This Handbook provides guidance for small business on quality management systems based on ISO 9001:2000. It explains what quality management systems are and gives examples of how to interpret and implement the requirements of ISO 9001:2000. The auditing process for certification is briefly described. In addition, the major changes in ISO 9001:2000 compared with ISO 9001:1994 are identified and their impact highlighted. (QR-008)
56pp
This Handbook comprises an illustrated plain English field guide intended for both the training of, and use in the field by, junior supervisory personnel involved in works on unsealed roads, including uncompleted works left overnight. The Handbook includes 12 fullpage, full-colour, perspective-style drawings of typical works situations in A5 landscape format. (MS-012)
HB 86 A guide to the selection, care, calibration and checking of measuring instruments in industry HB 86.1:1996 General principles 34pp
HB 90.2 Set2006 186pp HB 90.22000 The Service Industry HandbookGuide to ISO 9001:2000 163pp
This Handbook is written about the way a service industry operates. It provides a competency-based approach to service development and delivery that recognizes that both the point of contact with the customer is critical, and back-of-house activities are needed to deliver the service to achieve customer satisfaction. It will provide both a sound approach to ISO 9001: 2000 for service industries, and a better understanding of the benefits that service organizations implementing the Standard can achieve. (QR-008)
66pp
This Handbook comprises an illustrated plain English field guide intended for both the training of, and use in the field by, junior supervisory personnel involved in
This Handbook is written for the users of measuring equipment in industry. It sets out to explain measurement and measuring instruments in a straightforward manner. It covers such topics as selecting the right instrument for the application, what are 'accuracy' and 'uncertainty of measurement', and why instruments need to be calibrated and describes some approaches to calibration. As the first of a series, these issues are dealt with in a generic manner, while the subsequent parts, each devoted to specific types of measuring equipment deal with the relevant details. (QR-009)
267
HB 90.3 Set2006
HB 90.3 Set2006 130pp HB 90.32000 The Construction IndustryGuide to ISO 9001:2000 107pp
This Guide explains the requirements of ISO 9001 in terms relevant to the construction industry. Guidance focuses on each Clause of ISO 9001 as it applies to the key processes within a construction industry organization, with additional notes on applications relevant to engineering and building projects of any kind. (QR-008) ment systems requirements in this field. Guidance is given on the process model and design and development as they may apply to the software developer. The terminology used and the examples given are relevant to the software industry. In addition, the major changes in ISO 9001:2000 compared with ISO 9001:1994 are identified and their impact highlighted. (QR-008) functions of climate and topography, and roof characteristics in relation to the amount and distribution of snow loading on a roof. (BD-006)
16pp
Explains the concept of Standardization and assists readers of Australian Standards and other similar documents in their use and understanding of these documents.
27pp
Provides a general overview of electrical hazards in the workplace and indicates ways of reducing the risk of electric shock. Describes how an electric shock may be fatal by discussing its effect on a person's heart. (E-000)
HB 1081998 Timber Design HandbookIn accordance with the Australian Limit State Timber Design Code, AS 1720.11997 559pp
This Handbook provides comprehensive guidance on design of timber with reference to the methods given for limit states design in AS 1720.11997.Design of members is covered in detail with step by step instructions and worked examples. Also given is the background of timber properties and how they are derived. Published in conjunction with the Forest and Wood Products Research and Development Corporation. (TM-001)
HB 90.52000 Correlation between ISO 9001:2000 and the HACCP Principles 46pp
This Handbook provides a correlation between the requirements listed in the clauses of ISO 9001:2000 and the requirements which are implicit in the HACCP Principles, and brings out the complimentary nature of the two sets of requirements. The Handbook provides a guide for those who have a system based on either of these approaches and wish to implement the other or integrate both systems. (QR-008)
HB 1002000 (CJC 4) Coordination of power and telecommunicationsManual for the establishment of safe work practices and the minimization of operational interference between power systems and paired cable telecommunications systems 204pp
This Manual gives advice on the responsibilities and accountability of office and field managers both of power utilities and of Telstra for the effective and efficient coordination of the power and Telstra systems. It gives detailed analysis of physical interactions between the systems and details of safe work practices. (ET-007)
HB 1011997 (CJC 5) Coordination of power and telecommunicationsLow Frequency Induction (LFI): Code of practice for the mitigation of hazardous voltages induced into telecommunications lines 14pp
Amendment 1 5 October 1998 Specifies engineering principles and procedures to be undertaken in the mitigation of power frequency voltages electromagnetically induced into telecommunications lines where high voltage power lines run essentially parallel thereto. It defines power lines as high reliability (Categories A and B) or not (Category C), and specifies maximum acceptable limits for induced voltage under HV earth fault conditions. Identical with the 1974 (1978) ATC/ESAA publication Low Frequency Induction. (ET-007)
Provides an indexed compendium of metallic materials available in Australia, showing compositions, properties and product forms of a large range of metals, specifications to which they comply, and their suppliers. (Endorsement of the IMMA Handbook of Engineering Materials.) (MT-001)
85pp
86pp
Provides guidance for the legal profession on quality management systems that comply with the requirements of ISO 9001:2000. The requirements of the Standard are described in terms common to the legal profession, and the application of various requirements and typical examples in the legal environment are included. In addition, the major changes in ISO 9001:2000 compared with ISO 9001:1994 are identified and their impact highlighted. (QR-008)
This handbook provides guidance for people who wish to prepare a brief for their new kitchen and more effectively communicate their needs to kitchen designers. The aim of this Handbook is to prepare customers for the design process, to clarify their needs and desires and to enable them to present the kitchen designer with a clear outline, in the form of a design brief, to ensure that their expectations are met. The Handbook has been endorsed by the Housing Industry Association. (B-000)
HB 90.7 Set2006 100pp HB 90.72000 Education and TrainingGuide to ISO 9001:2000 77pp
Provides guidelines for those involved in education and training on establishing quality management systems complying with the requirements of ISO 9001:2000. The requirements and application of each clause of the Standard is explained in terms understood by educationalists and trainers. Typical examples are included to assist in understanding these requirements. In addition, the major changes in ISO 9001:2000 compared with ISO 9001:1994 are identified and their impact highlighted. (QR-008)
HB 1021997 (CJC 6) Coordination of power and telecommunicationsLow Frequency Induction (LFI): Application Guide to the LFI Code 86pp
Amendment 1 5 October 1998 Provides guidance on the Code CJC 5, Low Frequency Induction (SAA HB1011997, in sections dealing with the theory of LFI, calculations, determination of best engineering solution, evaluation of contributory and ameliorative factors, examples of calculations, field tests and measurements. Useful data is given in extensive appendices identical with the 1981 Telecom Australia/ESAA publication Application Guide for the Low Frequency Induction Code. (ET-007)
HB 114:1998 Guidelines for the design of eaves and box gutters 67pp
Provides guidelines in the use of AS/NZS 3500.3.2, National plumbing and drainage Part 3.2: Stormwater drainageAcceptable solutions, for design of eaves and box gutters. The guidelines are especially tailored to the needs of installers and others involved with roof drainage installations and provide clearly explained directions and fully worked examples. (WS-020)
HB 1031997 (CJC 7) Coordination of power and telecommunicationsCrossings Code: The arrangement of overhead power and telecommunications lines, pole stay wires, and suspension wires 38pp
Amendment 1 5 October 1998 Sets out, in Sections covering responsibilities and engineering practices, the requirements for common use services crossings on a Telstra or Electricity Utility pole; for crossings of stay wires supporting such poles; for in-span services crossings; and for street light suspension wires crossing power or telecommunications services. Identical with the 1988 ATC/ESAA publication Crossings Code. (ET-007)
HB 1231999 Guidelines for the selection, location and installation of visual warning devices in buildings 29pp
Provides guidance for the selection, location and installation of visual warning devices used in fire detection, warning, control and intercom systems. (FP-002)
64pp
Provides guidance to organizations that provide health services, and to those involved in the health services sector, on the development and implementation of quality management systems based on ISO 9001:2000. The application of each requirement is described in terms relevant to health services, and examples are included to assist in understanding their application. In addition, the major changes in ISO 9001:2000 compared with ISO 9001:1994 are identified and their impact highlighted. (QR-008)
HB 1252007 The glass and glazing handbook (including guide to AS 1288, Glass in buildings Selection and installation) 126pp
This Handbook complements AS 1288 and AS/NZS 2208. It also provides information on the various glass products available, to enable the consumer (glass purchaser/installer) and designer to choose the most appropriate product that meets their needs. (BD-007)
268
28pp
Provide guidance in a practical form to those people who are charged with arranging risk financing for their organisations, regardless of the size or nature of the organisation. (OB-007)
HB 144:1999 Guidance for forestry organisations in the use of environmental management system standards (ISO/TR 14061:1998) 65pp
This Handbook provides guidance on the use of the ISO 14000 Standards in the forestry industry with particular emphasis on sustainable forestry management. It provides an extensive list of technical references, conventions and policies on sustainable forestry management, and includes a number of case studies. The Handbook does not establish performance levels for forestry nor does it represent Standard Australia's stance on any of the issues discussed. This Handbook is identical to ISO TR 14061. (QR-011)
HB 1552002 Guide to the use of recycled concrete and masonry materials 77pp
This Handbook consolidates available information needed for the consideration of recycled concrete and masonry materials in construction applications. It is intended to provide the potential user general guidance on engineering evaluation requirements, environmental issues and economic considerations for determining the suitability and current uses of recycled concrete and masonry materials. (BD-002)
62pp
HB 132 Structural upgrading of older houses HB 132.1 (Set) Non-cyclone areas HB 132.11999 Non-cyclone areas 88pp
74pp
Provides an explanation on how automatic fire sprinkler systems function, where they are used and the various types of systems in use. Also provides facts and fallacies on the application of sprinklers and cost-benefits of sprinkler systems as well as a useful history and background. (B-000)
This Handbook provides details of methods for reducing the risk of aggregate loss from houses due to high winds. Deemed-to-comply details are provided for two levels of upgrading for non-cyclonic wind classifications. Supplement 1 to this Handbook provides deemed-to-comply connection details which will satisfy a third level of upgrading. A fourth level is available through compliance with current loading and design Standards. Published in conjunction with the Insurance Council of Australia. (B-000)
This Handbook is a practitioners' guide for internal auditors and any other assurance provider such as External auditors; Information system control professionalsinternal or external auditors, security professionals etc; Safety, health and environmental auditors; Quality auditors. This Handbook amplifies HB 436:2004 and the IIA's 'Professional Practices Framework' with respect to using and assuring the AS/NZS 4360:2004, Risk management process. In particular it describes how to use the risk management process to: Develop an assurance strategy; Plan an assurance engagement; Report the assurance program; and Design controls. (OB-007)
173pp
This Handbook provides details of methods for reducing the risk of aggregate loss from houses due to high winds. Deemed-to-comply details are provided for two levels of upgrading for cyclonic wind classifications. Supplement 1 to this Handbook provides deemed-to-comply connection details which will satisfy a third level of upgrading. A fourth level is available through compliance with current loading and design Standards. Published in conjunction with the Insurance Council of Australia. (B-000)
This publication has been written with the purpose of assisting in the production of high quality asphalt pavements and is the result of cooperative effort between Austroads and the Australian Asphalt Pavement Association (AAPA). In the past 20 years, there has been a substantial improvement to asphalt technology. This includes such advances as the introduction of new materials and additives, better characterisation techniques for materials, new structural and mix design procedures and an increase in the use of recycling. The Asphalt Guide addresses: the nature of asphalt materials and operating environment; selection of asphalt treatments and performance parameters; material constituents and their characteristics; asphalt mix design, including specialised mixes; mixing plants and production; paving planning, preparation, paver operation, spreading and compaction; maintenance of asphalt surfacings; asphalt recycling and quality management for asphalt supply, testing and contract surveillance. At 173 pages, the Asphalt Guide is a comprehensive manual to modern asphalt technology and provides a primary reference text for practitioners within the transport industry. It is also aimed at students studying asphalt for the first time. (CE-006)
111pp
This Handbook provides background material and useful tips for users of the 1289 series, Methods of testing soils for engineering purposes. It will also provide assistance to undergraduate engineers and geotechnicians seeking further understanding with Laboratory testing. (CE-009)
60pp
Intended as a Guide for qualified plasterers for the plastering of homes and commercial buildings on masonry backgrounds. Also Covers plastering to solid walls, ceilings and soffits and the use of lath as well as exterior cement-based plastering and interior plastering. (BD-096)
HB 1622002 Rules for the structure and drafting of Australian Standards 54pp
Specifies rules for the structure and drafting of Australian Standards and joint Australian/New Zealand Standards where the secretariat is held by Standards Australia. (D-000)
HB 153:2002 Urban Road Design: A Guide to the Geometric Design of Major Urban Roads 88pp
This major work provides guidelines for the geometric design of major urban roads and has been prepared by Austroads member agencies and industry experts to promote a common, standard approach to urban road design across Australia and New Zealand. Geometric road design guidelines are used as an aid to achieving consistent and operationally effective road designs. This guide represents the combined experience and international best practices of Austroads member agencies and industry experts in this area of geometric design. The result is an up-to-date coverage of Australian and New Zealand road design practice. Urban Road Design includes: definition of major urban roads; fundamental design considerations including performance requirements, traffic volumes and environmental considerations; design inputs such as speed and sight distance; geometric design guidelines for horizontal, vertical alignment, and cross section; other considerations such as intersections at grade, road safety and drainage and comprehensive glossary of terms. Urban Road Design is intended for use by general and local government practitioners working in road and traffic engineering and other related disciplines. Undergraduate and postgraduate students may also use it. (CE-006)
HB 1642002 Wood and wood preservationA complete guide to the AS/NZS 1604 Standards Series 78pp
Provides safety guidance in the application of preservativetreated timber and guidelines to the AS/NZS 1604 series, which specify preservative treatment for sawn and round timber as well as wood-based composite products. Part 1 provides general information about wood in construction, the benefits of wood preservation, treated timber and the environment, including brief remarks on health and safety of CCA, creosote/PEC and LOSP preservatives, and aspects of recycling and disposal of treated timber at the end of its effective service life; Part 2 covers the Standards themselves emphasising the penetration and retention requirements for fit-for-purpose treated commodities. (TM-006)
HB 136:2004 Safety aspectsGuidelines for child safety (ISO/IEC Guide 50:2002) 29pp
Provides regulatory authorities, manufacturers, and consumers with the principles for a systematic approach to addressing hazards, and specific developmental characteristics of children that place them at risk of injury and identify hazards across a broad range of products used in domestic situations, restaurants, nurseries and institutions which children may be exposed to during their use of, or interaction with, a product. Specific suggestions for addressing those hazards are also detailed. Identical with and reproduced from ISO/IEC Guide 50:2002. (CS-003)
166pp
Outlines a broad framework and the core elements that should be included in a security risk management process, and is consistent with the risk management principles of AS/NZS 4360: 2004. This Handbook can be used by any size or type of organisation from large multinationals to small businesses, government agencies and the not-for profit sector. (OB-007)
269
HB 170:2002
HB 170:2002 Wood Heating Resource Handbook Guide to the Selection, Installation and Operation of Wood Heaters 63pp
Amendment 1 24 December 2004 Amendment 2 8 June 2005 This Handbook was developed to assist prospective purchasers, owners (users), local government agencies, councils, builders, retailers and installers with guidance for the selection, installation, operation and maintenance of solid fuel (wood) heaters, together with information and guidance on issues that may arise from the operation of these home heaters. (CS-062) and also applies to the revision of image content when an order requires the deletion, correction or amendment of specific information. (MS-004)
HB 1812003 ISO/TR 12031 MicrographicsInspection of silver-gelatin microforms for evidence of deterioration (ISO/TR 12031:2000) 16pp
Provides a uniform method of selecting and inspecting silver-gelatin microforms for evidence of deterioration following identification of improper processing, handling, and storage conditions that promotes biological attack and various other kinds of image degradation. (MS-004)
HB 1822003 ISO/TR 10200 Legal admissability of microforms (ISO/TR 10200:1990, ISO/TR 10200:1990/Amd 1:1997) 16pp
Provides organizations with procedures for a program for microfilming documents. (MS-004)
HB 197:1999 An introductory guide to the slip resistance of pedestrian surface materials 15pp
This Handbook provides guidelines for the selection of slipresistant pedestrian surfaces classified in accordance with AS/NZS 4586:1999. It recommends minimum floor surface classifications for a variety of locations, and includes a commentary on the test methods set out in AS/NZS 4586, as well as information on the consideration of ramped surfaces. Published in conjunction with the CSIRO. (BD-094)
HB 172 Message Usage Model HB 172.12006 History and conceptual framework 23pp
16pp
Part 1 of a two-part Handbook, which provides guidance on the general implementation of healthcare messaging and the strategy surrounding its implementation. (IT-014)
Specifies a code of practice for the tutoring industry that covers ethical principles, qualifications of tutors and operational matters such as how to ensure child protection, service quality and that complaints are dealt with appropriately. (QR-002)
40pp
23pp
Part 2 of a two-part Handbook, which examines the different messaging Standards available for implementation and provides a guide for choosing which Standard suits which application. (IT-014)
This is an advisory handbook describing appropriate procedures for purchase and use of electrical measuring instruments, and in particular applies to multimeters. (EL-049)
HB 2022000 A management system for clinical and related wastesGuide to application of AS/NZS 3816 1998, Management of clinical and related wastes 15pp
This Handbook provides an insight into the requirements of AS/NZS 38161998 and is designed to increase the understanding and beneficial use of the Standard for application in Australia only. It must be read in conjunction with AS/NZS 3816. It should not be read in isolation. (HE-011)
HB 1742003 Information security management Implementation guide for the health sector 72pp
This handbook provides a set of detailed controls unique to the information security requirements of the Australian Health Sector. The guide is based on and interprets AS/NZS ISO/IEC 17799:2001-Information TechnologyCode of Practice for Information Security. (IT-014)
HB 1772003 ISO/TR 14105 Electronic imagingHuman and organizational for successful Electronic Image Management (EIM) implementation (ISO/TR 14105:2001) 20pp
Provides guidance for developing a framework for understanding and maximizing the human factors associated with successful implementation of Electronic Image Management (EIM) systems covering cognitive, physical, organizational and human factors as they apply to usability criteria for imaging technologies development, selection and implementation. (MS-004)
HB 1782003 ISO/TR 12654 Electronic imaging Recommendations for the management of electronic recording systems for the recording of documents that may be required as evidence, on WORM optical disk (ISO/TR 12654:1997) 5pp
Provides guidance for making recommendations to be followed in establishing procedures for the capture and storage of electronic images of documents that will ensure the preservation and integrity of the information recorded on the documents. (MS-004)
HB 205 (Set)2004 OHS Risk Management Set HB 2052004 OHS Risk Management Handbook 65pp
Provides practical guidance on how to apply the risk management process set out in AS/NZS4360:2004, Risk management to manage occupational health and safety risks. (MB-002)
34pp
HB 1792003 ISO/TR 12037 Electronic imaging Recommendations for the expungement of information recorded on write-once optical media (ISO/TR 12037:1998) 7pp
Provides guidance and procedures for the removal of information recorded on write-once optical media systems when expungement is ordered by the court or administrative authority. Includes procedures for the documentation of the actions to be taken during removal. (MS-004)
Provides guidance on planning and conducting an Initial Environmental Review and reporting on the outcome, as a means of determining an organisation's position in relation to the environment and its environmental aspects and impacts, and as a baseline for establishing an Environmental Management System. (QR-011)
HB 207 Environmental management HB 207.1:2000 Environmental labels and declarations Type III environmental declarations (ISO/TR 14025:2000) 25pp
Identifies and describes the elements and issues concerning Type III environmental declarations. Because the methodology underpinning Type III environmental declarations is still under development, this document was produced as a technical report by ISO and was adopted as a handbook in Australia and New Zealand.
HB 1802003 ISO/TR 12036 MicrographicsExpungement, deletion, correction or amendment of records on microforms (ISO/TR 12036:2000) 8pp
Provides guidance for removal and destruction of images from microforms when document expungement is ordered
51pp
This Guide has been prepared for those who are involved in motor sport and whose actions contribute to the wellbeing of others. (OB-007)
270
HB 207.2:2003 Integrating environmental aspects into product design and development (ISO/TR 14062:2002) 24pp
Describes concepts and current practices relating to the integration of environmental aspects into product (goods or services) design and development. (QR-011)
HB 2222006 Australian Health Care Client and Provider Identification Handbook 61pp
(IT-014)
HB 2402004 Guidelines for managing risk in outsourcing utilizing the AS/NZS4360:2004 process 93pp
Provides a guide to managing risk which arise when organisations outsource elements of their business. The handbook uses the risk management model in AS/NZS 4360: 2004 and includes case studies and a checklist of important issues to address when outsourcing (OB-007)
HB 207.3:2005 Life cycle impact assessmentExamples of application of ISO 14042 (ISO/TR 14047:2003) 87pp
Provides examples to illustrate current practice in carrying out a life cycle impact assessment in accordance with ISO 14042. (EV-005)
HB 207.42005 Inclusion of environmental aspects in electrotechnical product standards (IEC GUIDE 109 Ed. 2.0 (English 2003)) 10pp
Intended for standards writers and gives guidance on how to consider aspects relating to the impact on the environment of electrotechnical products when preparing standards for such products. (E-000)
HB 2272003 Portable soccer goalpostsManufacture, use and storage 6pp Available Superseded
Provides guidance on the manufacture, installation, use, storage and maintenance of portable soccer goalposts. It is intended for use by soccer officials, sports club personnel, school officials, sports equipment manufacturers and purchasers, parents, coaches, council employees and any other person concerned with soccer goal safety. (CS-095)
HB 2092003 Guidelines for the fabrication, use and maintenance of sports mouthguards 7pp
Provides guidacnce on the fabrication of sports mouthguards and details information to be given to users on their use and maintenacne. The document also provides guidance on the fabrication of custom-made and bimaxillary mouthguards. (CS-099)
31pp
HB 2112001 Occupational health and safety management systemsA guide to AS 4801 for small business 73pp
Using examples and worksheets, gives guidance for small business to the requirements of AS 48012000 Occupational health and safety management systemsA specification with guidance for use. (SF-001)
65pp
The overall aim of this Handbook is to provide businesses with a greater understanding of options they have for collecting customer satisfaction data. The document explains AS/NZS ISO 9001:2000 in the context of continuous measurement of customer satisfactionthat is, a Customer Satisfaction Monitor. It includes a number of 'real-life' examples of businesses where customer satisfaction is being measured on a continuous basis and explains different methods that may be employed to collect customer satisfaction data. (QR-002)
This handbook has been developed to provide practical information for the collection, storage and use of rainwater within an urban environment on private residential property. The Rainwater Tank Design and Installation Handbook has been developed by the Australian Rainwater Industry Development Association (ARID) to assist Local Councils, Plumbers, Builders/Developers and homeowners. It outlines the minimum standards and performance requirements criteria for all development works associated with carrying out rainwater tank installations within private property. It applies to new rainwater tank installations as well as alterations, additions, maintenance and repairs to existing installations. (WS-014)
101pp
Provides cablers with a 'field' document to assist them to cable residential premises for telephone, data, TV, control and security, guiding them through appropriate standard requirements with cross references to the actual Standards, where it is necessary for clarification. (CT-001)
HB 219:2006 Earth potential riseProtection of telecommunications network users, personnel and plantWorked examples for the application guide 73pp
Provides some worked examples that supplement the understanding of AS/NZS 3835.2, Earth potential riseProtection of telecommunications network users, personnel and plant, Part 2: Application guide. (ET-007)
HB 255:2002 ISO/TR 19121 Geographic information Imagery and gridded data (ISO/TR 19121:2000)
35pp
HB 2352007 Implementers guideline for HL7 referral, discharge and health record messaging 122pp
Provides guidance on AS 4700.62006 and covers implementation of the Health Level Seven (HL7) Version 2.4 protocol, for communication of clinical patient-centred information between health service providers in Australia. This Handbook is specifically applicable to clinical communications covering Discharge, Shared Care, Event Summaries, and notification of Shared Electronic Health Record Systems. (IT-014)
Reviews the manner by which geographic information users and the 19100 series of Standards handle imagery and gridded data. Presents a plan to address the imagery and gridded data in an integrated manner. (IT-004)
HB 256:2007 Metadata usage in Australian and New Zealand education and training 70pp
Provides guidance in clarifying business requirements, helps with decision making processes and assists in determining courses of action by providing a wide range of relevant references and sound advice. (IT-019)
42pp
Sets out a definition and process for business continuity management, and provides a workbook that may be used by organisations to assist in implementation. (OB-007)
271
HB 259.1:2001
HB 259 Guidelines for road condition monitoring HB 259.1:2001 Pavement roughness 44pp HB 292 Set2006 Business Continuity Management Handbooks Set HB 2922006 A practitioners guide to business continuity management 171pp
This Guide provides an overview of selected generally accepted practices and emerging new practices used variously within Australasia, USA and UK. Business Continuity Management (BCM) practice is such that approaches that work well in one organisation may be wholly inappropriate for a different organisation. Extreme care therefore needs to be taken in deciding what and how aspects of BCM will be implemented within an organisation. The structure of the Guide is based on Standards Australia Business Continuity Management Handbook HB 221:2004. Much of the information presented is fully consistent with HB 221. However, the principles of HB 221 have been significantly expanded upon and extensive new explanatory information is provided. This material is broadly consistent with the principles of other generally accepted practices such as NFPA1600 and the BCI Good Practice Guidelines 2005, Spring TR19:2005; and the work of the DRII and DRJ. (OB-007)
HB 295.3.12007 Visual and tactile examination of components 1p Obsolescent HB 295.3.22008 Hazardous sharp points HB 295.3.22007 Hazardous sharp points Obsolescent HB 295.3.32008 Hazardous sharp edges HB 295.3.32007 Hazardous sharp edges Obsolescent HB 295.3.42008 Requirements for decoration HB 295.3.42007 Requirements for decoration Obsolescent 3pp 3pp
This Handbook provides guidelines to promote the standardisation of road pavement condition monitoring and ensure that only useful data is collected, to lower costs of collection and of processing data, improve the quality, and increase the value, of data for road agencies. (CE-006)
3pp 3pp
2pp 2pp
HB 2622008 Guidelines for pathology messaging between pathology providers and health service providers 100pp
This handbook provides a guide to implementing HL7 Pathology messaging between pathology providers and health service providers in Australia using the HL7 Version 2.3.1 protocol. (IT-014)
HB 295.3.52008 Product safety warning labels and markings 13pp HB 295.3.52007 Product safety warning labels and markings 13pp Obsolescent HB 295.3.62008 Scissoring, shearing and pinching HB 295.3.62007 Scissoring, shearing and pinching Obsolescent 2pp 1p
27pp
(WS-014)
HB 2642003 Power qualityRecommendations for the application of AS/NZS 61000.3.6 and AS/NZS 61000.3.7 93pp
Provides a coherent and practical guide to the application of the current Australian/New Zealand Standards for limiting harmonic voltages and voltage fluctuations in medium voltage (MV) networks, AS/NZS 61000.3.6 and AS/NZS 61000.3.7 respectively. (EL-034)
HB 295.3.72008 Small objectsRemoval of graspable components 2pp HB 295.3.72007 Small objectsRemoval of graspable components 2pp Obsolescent HB 295.3.82008 Volatile compounds content HB 295.3.82007 Volatile compounds content Obsolescent HB 295.3.92008 Formaldehyde release HB 295.3.92007 Formaldehyde release Obsolescent HB 295.3.102008 Release of Bisphenol A HB 295.3.102007 Release of Bisphenol A Obsolescent 2pp 2pp
294pp
Written by Kevin J. Foley, this book identifies the need for a unified, whole-of-enterprise system of management for any enterprise, and explains why adopting a 'multistakeholder' model of the business, with quality management as its central theory, can lead to better understanding, and thus better management. Meta Management also examines the history and evolution of 'quality management' itself against the broad context of management theory, economics and sociology, and establishes its relevance to the contemporary business enterprise. (MB-011)
HB 295 (Set)2008 Product Safety Framework Set HB 295 Product Safety Framework HB 295.12007 Application guide
196pp
(ZZ-002)
HB 2762004 A Guide to Good Practice for Energy Efficient Installation of Residential Heating, Cooling & Air Conditioning Plant & Equipment 62pp
Applies to self-acting pressure regulators, installed independently or as part of a combination control, which are used to reduce the pressure of vapour phase liquefied petroleum gases to the maximum outlet pressures. (ME-062)
1p 1p
10pp
HB 2802006 Case StudiesHow Boards and Senior Management Have Governed ICT Projects to Succeed (or Fail) 79pp
This Handbook provides insight into the lessons learnt by a number of major Australian organizations when implementing information and communications technology projects. It is a rare resource, as many organizations are guarded about sharing details of their internal project successes and failures. It presents a set of relatively simple guidelines for boards and top managers to meet their responsibilities. They have been framed to be consistent with the ASX guidelines on corporate governance. (IT-030)
Part 1 of a three part Handbook that establishes a Product Safety Framework that is designed to enhance the safe supply, sale and use of products. It provides a verification process that allows for validation. It thus provides a generic hazards-based approach rather than focussing on specific products. (ZZ-002)
2pp 1p
8pp
Part 2 of a three part Handbook that establishes a Product Safety Framework that is designed to enhance the safe supply, sale and use of products. It provides a verification process that allows for validation. It thus provides a generic hazards-based approach rather than focussing on specific products. (ZZ-002)
HB 295.3.112008 Release of chemicalsMigration of certain elements 16pp HB 295.3.112007 Release of chemicalsMigration of certain elements 15pp Obsolescent HB 295.3.122008 Release of N-Nitrosamines and NNitrosatables HB 295.3.122007 Release of N-Nitrosamines and NNitrosatables Obsolescent
HB 295.3
Part 3 of a three part Handbook that establishes a Product Safety Framework that is designed to enhance the safe supply, sale and use of products. It provides a verification process that allows for validation. It thus provides a generic hazards-based approach rather than focussing on specific products. (ZZ-002)
2pp
1p
272
1p 1p
5pp 5pp
3pp 3pp
1p
3pp 2pp
2pp
HB 3052008 Design handbook for RC structures retrofitted with FRP and metal plates: beams and slabs 68pp
(BD-101)
1p
1p 1p
HB 3062007 User interface requirements for the presentation of health data 29pp
This Handbook provides guidance for the design of effective user interfaces for health information systems. (IT-014)
3pp 3pp
HB 3072007 Guide to the principles and desirable features of clinical decision support systems 18pp
This Handbook defines the type of clinical decision support systems used in health care and identifies the principal elements of quality systems. (IT-014)
2pp
1p 1p
3pp 2pp
2pp 2pp
37pp
2pp 2pp
The Handbook provides guidelines to lawyers on how to align their provision of legal services to best meet their clients needs by utilising the Risk Management Standard (AS/NZS 4360). It can also be used by their clients to determine the nature of the legal risk management services they would like to receive. (OB-007)
35pp
The Australian business community operates within a dynamic and complex economic, legislative and industrial environment. Businesses (of all sizes), government agencies, professional associations and peak bodies have also been dealing with, and will continue to deal with, the raft of challenges arising from globalisation and the shift in Australias population demographics. As well as learning how to accommodate an increasingly diverse and mobile workforce they need to plan for an ageing workforce with diverse needs and flexibilities. Workforce planning is not just an imperative for expanding workplaces or those that need to replace workers, it is also critical when downsizing or undergoing restructures, mergers and acquisitions. These guidelines on workforce planning have been prepared to further inform business managers on the topic. They provide an overview of a simple and proven approach to incorporating workforce planning into normal business practice. They are supported with current references and a stepby-step guide to implementing a workforce planning project. The guidelines are applicable for all size businesses including: industry peak bodies, organisations, associations, government agencies and industry skills groups. It is anticipated these guidelines will be updated regularly and will become a staple resource for all business managers. This document is not a Standard and it is not intended to be prescriptive. (MB-009)
HB 3132006 National registry and toolkit projectFinal project outcomes report 41pp
Provides a business case for expanding the BizDex Proof of Concept into a Pilot production deployment, a process for engaging end users and a strategy for disseminating project outcomes. (IT-033)
13pp
Intended to provide readers with an introduction to the NOIE SME Connector and Pilot e-Business Registry project. Provides the reader with an overview of the issues that the project is attempting to address and a contextual framework in which the organization of project documentation deliverables may be referenced. (IT-033)
HB 3172006 Grain ticket delivery receipt POC public process implementation guidelines 37pp
Creates a POC Public Process for the Grain Ticket Delivery Receipt Notification Process. (IT-033)
273
HB 3182006
HB 3182006 B2B integration toolkitBusiness requirements 43pp
Defines the business and functional requirements for an integration toolkit for small business. (IT-033)
MP 522001 Manual of authorization procedures for plumbing and drainage products Available Superseded
91pp
18pp
Provides strategies and guidelines for organisations to develop an effective corporate governance culture. Elaborates on the general concepts and elements of corporate governance culture and discusses accountability and monitoring of corporate governance culture. The Handbook is aimed at small to medium enterprises. (MB-004)
Amendment 1 12 August 2002 Provides detailed information on the authorization procedures for plumbing products based upon the national StandardsMark, WaterMark and TypeTest Mark certification schemes administered by Standards Australia through its approved Certifying Body.
HB 436:2004 (Guidelines to AS/NZS 4360:2004) Risk Management Guidelines Companion to AS/NZS 4360:2004 116pp
Amendment 1 20 December 2005 (OB-007)
MP 532004 Personal financial planning (ISO/CD 15551, ISO/CD 21551:2003, ISO/CD 21555:2003, ISO/CD 23449:2003) 38pp
This document is divided into three parts that: 1. provide a set of definitions for common financial planning terms, process elements that describe the steps that a planner should follow when designing a plan and guidance for operating a planning practice; 2. provides details of planner competence in terms of knowledge and skill; 3. provides a framework for ethical principles and experience requirements for planners. The publication is identical with ISO/CD 21551, ISO/CD 21555, ISO/CD 15551 and ISO/CD 23449. (OB-015)
86pp 61pp
MP 551988 Vehicle identification number (VIN) codes (ISO 3779:1983, ISO 3780:1983, ISO 4030:1983) 6pp
Incorporates the relevant International Standards in one comprehensive document, and gives guidelines on procedures to be followed by Australian manufacturers in applications for a WMI Code, and in setting up a VIN numbering system in accordance with the ISO format. Technically equivalent to ISO 3779, ISO 3780, and ISO 4030 which cover Vehicle Identification Number (VIN) and World Manufacturer Identifier (WMI).
Sets out a broad framework and core processes for inclusion in an organization's employment screening. (MB-009)
Miscellaneous Publications
MH 31976 Metric conversion: machine tool specifications 9pp
Provides a listing of units for expressing machine tool characteristics and sets out information on the units that should be used to specify the basic operating functions of the more common types of machine tools used in metal removal, metal-forming, plastics moulding, electroplating, electrical discharge machining, welding, flame cutting, die casting and woodworking.
HB 3242008 Lexicon of Key Terms used in Security HB 3252008 Assuring probity in decision-making
78pp 31pp
(MB-004)
HB 400 (Set)2004 Corporate Governance Set HB 4002004 Introduction to Corporate Governance 56pp
MP 21938 Report on the standardization of minimum requirements for sewerage by-laws 63pp
(WS-000)
This Handbook provides information that will assist industry in applying the AS 8000 series of Corporate Governance Standards. The Handbook places the Standards in the context of the Corporations Act and the broader corporate governance landscape in Australia. (MB-004)
Provides rules for the uniformity in style and presentation of draft Standards. (MS-000)
6pp
77pp
This Handbook provides information that will assist industry in applying the AS 8000 series of Standards. The Handbook explores how the Standards may be applied in a variety of industry contexts, including education, healthcare and in the not-for-profit sector. The Handbook also describes fraud and corruption control as it relates to corporate governance. (MB-004)
Provides a glossary of terms to promote consistency of terminology associated with buried pipes.
MP 621992 OSIVocabulary
54pp
13pp
Provides a basic guide for microfilm operators with particular reference to planetary cameras. (MS-004)
Defines the terms used in the OSI environment. The definitions have been culled from a number of ISO Standards in the OSI area covering all layers of the basic reference model. (IT-001)
17pp
Provides guidance in relation to the development of business plans. Guidelines in relation to strategic planning are outside the scope of this document. (MB-004)
68pp
Provides a list of certified gas cylinder test stations, the types of cylinder or vessel that each station is certified to test, and current and obsolete test station marks. (ME-002)
18pp
Provides guidelines on how to present information in board reports, so that board members can discharge their duties in the best interest of the organisation. It will assist both board members and those involved in the preparation of the reports. (MB-004)
MP 651992 Lump sum contract for building works with administration by proprietor (RAIA ABP-1 1992) 137pp
Amendment 1 16 August 1993 Sets out general conditions of contract for building projects of relatively small scale, where administration of the contract is carried out by the proprietor. It consists of a folder containing a set of practice notes, a pad of standard forms for contract administration together with two contracts, one marked builder's copy and the other marked proprietor's copy.
25pp
Amendment 1 7 October 2005 Specifies uniform procedures for the certification of plumbing and drainage products that require statutory authorization. Such products are generally intended for use on authorized plumbing and drainage work by authorized persons. (WS-031)
274
1p
Specifies a suite of interoperability tests which can be performed on equipment which complies with the X.400 (1984) series of Recommendations. This Miscellaneous Publication is identical with, and reproduced from, OSINET X.400 Interoperability Tests, June 1990. (IT-001)
Quick-reference card, jointly prepared by Standards Australia and the Australian council on Healthcare Standards, for providing simple 'how to do it' information and guidance, in the form of a flow chart, for the storage and handling of processed medical and surgical instruments and equipment in health care facilities. To be used in conjunction with AS 41871998. (HE-023)
MP 932004 2004 Australian Design Awards Yearbook 168pp MP 932003 2003 Australian Design Awards Yearbook 128pp MP 932002 2002 Australian Design Awards Yearbook 80pp MP 932001 2001 Australian Design Awards Yearbook 80pp MP 942003 Product numbering standards for electronic health supply chains 25pp
Amendment 1 26 March 2004 To hand down a clear recommendation on a national product numbering standard to be used across the Australian hospital supply chain. (IT-014)
101pp
1p
Specifies a suite of interoperability tests which can be performed on equipment which complies with the file transfer access management standard (ISO/IEC 8571). This Miscellaneous Publication is identical with, and reproduced from, OSINET FTAM Interoperability Tests, June 1990. (IT-001)
Quick-reference card, jointly prepared by Standards Australia and the Australian council on Healthcare Standards, for providing simple 'how to do it' information and guidance, in the form of a flow chart, for the cleaning of reusable medical and surgical instruments and equipment in health care facilities. To be used in conjunction with AS 41871998. (HE-023)
3pp
Provides a form for use when assessing the adequacy of a written test method.
1p
MP 74:1996 Strategies for the development of Standards for digital video and associated services 125pp
Provides an overview of the standards environment in Australia and New Zealand, as it applies to digital television and related digital broadband and interactive services and provides recommendations for future Standards development strategies, to ensure adequate flexibility, openness and freedom of choice for consumers in the uptake of digital services. (E-000)
Quick-reference card, jointly prepared by Standards Australia and the Australian Council on Healthcare Standards, for providing simple 'how to do it' information and guidance, in the form of a flow chart, for the disinfection of reusable medical and surgical instruments and equipment in health care facilities. To be used in conjunction with AS 4187 1998. (HE-023)
MP 751996 Strategies for the implementation of a Public Key Authentication Framework (PKAF) in Australia 69pp
Sets out recommendations and describes issues for the implementation of a Public Key Authentication Framework (PKAF) as the infrastructure needed to ensure that electronic transactions can be validated when electronic commerce becomes commonplace. Outlines the needs and proposals for compatible national and international systems of "digital signatures" necessary for the compatibility between organizations (both locally and internationally) and private citizens. Relevant to Australian businesses and government operations. Policy and legal issues are also canvassed. (E-000)
Rulings
RUL FR Rulings to chain of custody Standard for certified wood and forest products RUL FR.02007 Rulling 0: Introduction and list of rulings 2pp
(B-000)
MP 87 Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) MP 87.1:2008 Product Certification ProgramBasic rules and procedures 51pp
Contains the basic rules and procedures for the management, administration and operation of the Product Certification Program under the Australian/New Zealand Certification Scheme (ANZEx Scheme) for explosion-protected electrical equipment; this Program embraces certification of electrical equipment intended for use in explosive atmospheres and is proposed as the National Certification Scheme in Australia and New Zealand. (P-008)
MP 87.2:2007 Recognized Service Facilities Program Basic rules and procedures 34pp
Contains the basic rules and procedures for the management, administration and operation of the Australian Recognition Scheme for facilities that overhaul, repair or modify explosion-protected electrical equipment. The Recognized Service Facilities Program embraces recognition of Ex Service Facilities that overhaul, repair and modify electrical equipment intended for use in explosive atmospheres and is proposed as the National Scheme in Australia. (P-008)
RUL ML Rulings to metal Standards RUL ML.12008 Cathodic protection interference levels (Ruling to AS 2832.12004) 1p
(MT-014)
1p
Quick-reference card, jointly prepared by Standards Australia and the Australian Council on Healthcare Standards, for providing simple 'how to do it' information and guidance, in the form of a table, for sterilizing reusable medical and surgical instruments and equipment in health care facilities. To be used in conjunction with AS 41871998. (HE-023)
RUL PE Rulings to pressure equipment Standards RUL PE.02002 Part 0: Introduction and list of rulings 2pp
(ME-001)
MP 801999 Guide to application of AS 41871998 Preparation, inspection and packaging for sterilization 1p
Quick-reference card, jointly prepared by Standards Australia and the Australian Council on Healthcare Standards, for providing simple 'how to do it' information and guidance, in the form of a flow chart, for the preparation, inspection and packaging of reusable medical and surgical instruments and equipment for sterilization in health care facilities. To be used in conjunction with AS 41871998. (HE-023)
MP 882000 Evolution of Australian Standard for pressure vessel steel plate 11pp
Provides the pressure equipment industry with a historical guide to the significant changes to the Standards for pressure equipment steel plate. (ME-001)
RUL PE.12002 Ruling 1: Retention of backing strips in logitudinal joints in refrigeration vessels (Ruling to AS 1210) 1p
(ME-001)
275
RUL PE.22002
RUL PE.22002 Ruling 2: Nonconforming longitudinal joints in refrigeration vessels (Ruling to AS 1210) 2pp
(ME-001)
RUL PL.162002 Ruling 16: Sanitary fixtures delivery temperature (Ruling to AS 3500.41994) 1p
Ruling clarifying Clause 1.10.2, Sanitary fixtures delivery temperature. (WS-014)
RUL PE.32002 Ruling 3: Internally fitted doors for beer tanks (Ruling to AS 1210) 2pp
(ME-001)
1p
1p
(WS-014)
(WS-014)
RUL PE.52002 Ruling 5: Sugar processing vacuum pans and evaporatorsTubeplate design and tube fixing (Ruling to AS 1210) 1p
(ME-001)
RUL PL.182002 Ruling 18: Unconcealed storage water containers (Ruling to AS 3500.41994) 1p
Ruling clarifying Clause 4.4.2, Unconcealed storage water containers. (WS-014)
RUL PE.62002 Ruling 6: Fusion-welded chlorine transport drums (Ruling to AS 1210) 3pp
(ME-001)
RUL PL.42002 Ruling 4: Water storage and break tanks (Ruling to AS 3500.11992) 1p
Ruling clarifying Section 8, Water storage and break tanks. (WS-014)
RUL PE.82002 Ruling 8: Seamless copper pipe joined by brazing (Ruling to AS 4041) 2pp
(ME-001)
RUL PE.92002 Ruling 9: Design of pressure equipment using steel having bilateral thickness tolerances (Ruling to AS 1210 and AS 1548) 2pp
(ME-001)
RUL PL.222002 Ruling 22: Size and material and installation (Ruling to AS 3500.41994) 1p
Ruling clarifying Clauses 4.12.1(c) and 4.12.3(d)(v), Size and material and installation. (WS-014)
RUL PE.102001 Ruling 10: Advanced design vesselsUse of joggled joints (Ruling to AS 1210 Supplement 11990) 1p
(ME-001)
RUL PE.112001 Ruling 11: Advanced design vessels Design strength valves (Ruling to AS 1210 Supplement 11990)
(ME-001)
RUL PE.122004 Ruling 12: Minimum nominal thickness of pressure parts (AS 12101997) 1p
(ME-001)
RUL PL.102002 Ruling 10: Minimum thickness for thermal insulation (Ruling to AS 3500.41994) 1p
Ruling clarifying Table 6.2, minimum thickness for thermal insulation. (WS-014)
RUL PE.132004 Ruling 13: Specified minimum tensile strength of steel for buried and mounded storage vessels (AS 12101997) 1p
(ME-001)
RUL PL.112002 Ruling 11: DN 80 stack with the top section graded installed in a Class 1 to 4 building (Ruling to AS 3500.21990) 1p
Ruling clarifying Clause 8.8.3, DN stack with the top section graded installed in a class 1 to 4 building. (WS-014)
RUL PL.262002 Ruling 26: Local authority water supply to properties with treatment plants (Ruling to AS 3500.11992) 1p
Ruling clarifying General, Local authority water supply to properties with treatment plants. (WS-014)
RUL PE.142008 Ruling 14: Design strength for stainless steel materials (Ruling to AS 12101997) 1p
(ME-001)
RUL PF Rulings to protective footwear Standards RUL PF.1:2004 Ruling 1: Uppers (Ruling to AS/NZS 2210.2:2000)
Ruling to clarify the status of a collar.
RUL PL.272002 Ruling 27: General design requirements for sanitary plumbing systems (Ruling to AS 3500.21990) 1p
Ruling clarifying Section 6, General design requiremnts for sanitary plumbing systems. (WS-014)
1p
RUL PL.282002 Ruling 28: Materials and products (UPVC) (Ruling to AS 3500.21990) 1p
Ruling clarifying Section 2, materials and products (UPVC). (WS-014)
(SF-003)
RUL PF.2:2004 Ruling 2: Flame resistance (Ruling to AS/NZS 4821(Int):2002) RUL PL Rulings to plumbing and piping systems Standards RUL PL.02002 Part 0: Introduction and list of rulings
1p
(SF-003)
RUL PL.292002 Ruling 29: Materials and products (PE-X) (Ruling to AS 3500.11992) 1p
Ruling clarifying Clause 2.4.9 and AS 3500.41994 Clause 2.2.7, Materials and products (PE-X) (WS-014)
1p
Rulings to the plumbing and piping systems Standards are interpretations relating to specific enquiries that have a wide area of practical application. (WS-014)
RUL PL.302002 Ruling 30: Connection points for shortterm sites (Ruling to AS/NZS 3500.2.2 1996) 1p
Ruling clarifying Clause 3.15.3, Connection points for short-term sites. (WS-014)
276
and universal identifiers (mainly OIDs and GUIDs) in Australia. It describes the components of a hierarchic designator and where and how they are used in HL7 messaging. (IT-014)
29pp
RUL PL.322002 Ruling 32: Sanitary fixtures delivery temperature (Ruling to AS/NZS 3500.4.2:1997) 1p
Ruling clarifying Clause 1.6.2, Sanitary fixtures delivery temperature. (WS-014)
This Technical Report identifies the need for and feasibility of technical and operational standards for health and human services call centres and gives recommendations for development of further standards relevant to call centres. (IT-014)
RUL PL.332002 Ruling 33: Encasing high-density polyethylene (HDPE) in concrete (Ruling to AS/NZS 3500.2.2:1996) 1p
Ruling clarifying Encasing high-density polyethylene (HDPE) in concrete. (WS-014)
TR 48902008 HL7 messaging requirements for scheduling, bed availability, consent and eligibility 13pp
This Technical Report examines the current use of HL7 messaging standards and guidelines for Scheduling, Bed Availability, Consent and Eligibility. It also outlines the needs and priorities identified by state health departments for future standardization work in this area. (IT-014)
RUL PL.342002 Ruling 34: Polypropylene piping type (PPR) (Ruling to AS/NZS 3500.1.21998) 1p
Ruling clarifying Table 1, Polypropylene piping (PPR). (WS-014)
TR 2.11-112008 Coal - Preparation and certification of ASCRM 011-11 (Hardgrove grindability index) 3pp
Included with the purchase of ASCRM 011-112008. (MN-001)
TR 61340 Electrostatics TR 61340.5.12005 Protection of electronic devices from electrostatic phenomenaGeneral requirements (IEC/TS 61340-5-1 Ed. 1.0 (English 1998), IEC/TS 61340-5-1 Ed. 1.0 Cor.1 (Bilingual 1999), IEC/TS 61340-5-1 Ed. 1.0 Cor.2 (Bilingual 2002)) 65pp
Gives guidance that will minimize the unwanted effects of electrostatic discharge. (E-000)
RUL PL.352002 Ruling 35: Polypropylene random copolymer (PP-R) pipe (Ruling to AS/NZS 3500.1.2:1998) 1p
Ruling clarifying Clause 2.4.11, relating to the use of polypropylene (PP-R) pipe SDR 11 pipe as an acceptable solution for cold water application. (WS-014)
RUL PL.362007 Heated water temperature control (Legionella) (Ruling to AS/NZS 3500.4:2003) 1p
(WS-014)
Technical Reports
TR 2 Certified reference materials TR 2.2-11997 Float glass (for use in determination of abradability index by AS 1774.23.1) Preparation and certification of ASCRM 002-1 4pp
Describes the origin, preparation, calibration and certification of the certified reference float glass material, ASCRM 002-1, to be used in determining the abradability index of a refractory material by the method given in AS 1774.23.1. Included in purchase of ASCRM 002-1. (MN-007)
TR 61340.5.22005 Protection of electronic devices from electrostatic phenomenaUser guide (IEC/TS 61340-5-2 Ed. 1.0 (Bilingual 1999)) 42pp
Provides guidelines for the implementation of TR61340.5.1. (E-000)
TR 2.2-21999 Float glass (for use in determination of abradability index by AS 1774.23.2) Preparation and certification of ASCRM 002-2 4pp
Describes the origin, preparation, calibration and certification of the certified reference float glass material, ASCRM 002-2, to be used in determining the abradability index of a refractory material by the method given in AS 1774.23.2. Included in purchase of ASCRM 002-2. (MN-007)
ACA TS 0031997 Customer Switching Systems Connected to the Public Switched Telephone Network 95pp Available Superseded
Defines the technical conditions and requirements for transmission equipment, CSS and related voice switching equipment (including conference bridges) for connection at the Network Boundary of the Public Switched Telephone Network (PSTN). (CT-099)
TR 2.3-21993 Electrode carbonPreparation and certification of ASCRM 003-2 (for use in GrayKing coke type test (AS 1038.12.2)) 2pp
Describes the preparation and certification of the certified reference coal sample ASCRM 003-2. Included in purchase of ASCRM 003-2. (MN-007)
23pp
This technical report provides lists of resources and introduces topics for further research and discussion in the general area of Telehealth. (IT-014)
ACA TS 0041997 Voice Frequency Performance Requirements for Customer Equipment 44pp Available Superseded
Specifies requirements, in addition to those in TS 002, for Customer Equipment which transmits voice or voice messages in association with the Public Switched Telephone Network and/or the Integrated Services Digital Network. (CT-099)
TR 2.71985 Iron orePreparation and certification of ASCRM 007 (Dampier Lump) 12pp
Amendment 1 4 August 1986 Provides certified values for total iron, silicon, aluminium, calcium, magnesium, manganese, titanium, phosphorus, sulphur, sodium, potassium, vanadium, arsenic and loss on ignition for a prepared sample of iron ore, and provides indicated values for lead, zinc, copper, chromium, nickel and cobalt. Participating laboratories and comprehensive results are listed in appendices. Included in purchases of ASCRM 007. (MN-002)
TR 29652007 Harmonisation of HD and EI data types across AS 4700.X Standards and associated Handbooks 25pp
This technical report identifies HD and EI data types across AS 4700.X Australian Implementation of Health Level Seven (HL7) Version 2 Standards and associated Handbooks. This report may lead to the publication of amendments to Health Informatics publications (IT-014)
ACA TS 0051997 Analogue Cellular Mobile Telecommunications SystemAMPS Mobile Station 122pp
Defines technical conditions and requirements that customer equipment (CE) must meet for connection to a public advanced mobile phone system (AMPS) analogue cellular mobile telecommunications system. It is based upon the mobile station and air interface parts of the USA Electronic Industries Association (EIA) Standards EIA-553 and EIA IS-19-B. Commonality with these Standards has been retained, whilst maintaining air interface compatibility and mobile equipment compatibility at the basic service standard level. (CT-099)
277
ACA TS 0061997
ACA TS 0061997 General Requirements for Customer Equipment Connected to the Non-switched Telephone Network 26pp Available Superseded
Specifies interface conditions and requirements for Customer Equipment for connection to the non-switched public telephone network. Equipment covered includes items incorporating either analogue or digital interfaces; in the latter case the only conditions defined are those at layer 1 (physical layer). (CT-099) equipment must meet for connection to the MobileSatTM system, and through it, where appropriate, a carrier's network. It is based upon MobileSatTM Air Interface Specification 53212551105 and AS 4080. It is not intended to be applicable to other mobile satellite systems. (CT-099)
ACIF G563:2001 Supporting arrangements for the supply of Digital Subscriber Line (DSL) Customer Equipment 5pp
Provide information about DSL CE that should be made available to consumers and retailers; and requirements for a process for suppliers of DSL CE to be able to verify interoperability with Carriage Service Providers' equipment.
24pp
ACA TS 0071997 General Requirements for Customer Equipment Connected to the Telex Network 91pp
Defines requirements for interworking of Customer Equipment providing telex facilities using terminal mode signalling protocols utilizing either double current or frequency key shifting techniques. Also includes nonmandatory recommendations, related to quality of service. Requirements are based on the applicable CCITT Recommendations, in particular F.60 and R.20. (CT-099)
Specifies the interface requirements for broadcaster equipment and cabling in relation to the interface between a telecommunications network operated by a carrier and broadcaster equipment or broadcaster cabling. Specifies requirements and testing for the interfacing of broadcaster's and a carrier's networks and includes broadcaster analogue audio equipment and broadcaster analogue video equipment. (CT-099)
AS/ACIF S002:2005 Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network 98pp
Specifies the technical requirements for CE and in the case of compound CE the parts of the compound CE that are designed or intended for connection to an analogue PSTN two-wire service. (CT-098)
ACA TS 0251997 General Requirements for Line Isolation Devices connected between Airservices Australia Facilities and a Telecommunications Network 27pp
Defines the technical conditions and requirements for interworking and network compatibility for Line Isolation Devices for the connection of facilities used by Airservices Australia to a Telecommunications Network. (CT-099)
AS/ACIF S003:2005 Customer Access Equipment for connection to a Telecommunications Network 75pp
Specifies the technical requirements for Customer Access Equipment (CAE) that:is designed with multiple ports (local or network) that provides or is intended to provide access (gateway functions) to a Telecommunications Network; andis capable of switching, storage, processing, conversion, integration, line isolation/coupling or multiplexing of analogue or digital voice or voice equivalent communication. (CT-098)
ACA TS 0081997 Requirements for Authorised Cabling Products 49pp Available Superseded
Defines requirements for all cabling products forming part of a customer premises installation intended for connection to a telecommunications network provided by a carrier. (CT-099)
ACA TS 0281997 Radio Equipment and Systems Cordless TelecommunicationsDigital Enhanced Cordless Telecommunications (DECT) 23pp
Specifies the technical conditions and requirements for non-interference interworking for Digital Enhanced and Cordless Telecommunications (DECT) portable part and fixed part. The Standard is based on the European Telecommunications Standards Institute (ETSI) suite of European Technical Standards. (CT-099)
ACA TS 0141997 General Requirements for Customer Equipment Connected to an ISDN Primary Rate Interface 359pp
Provides equipment manufacturers and suppliers with the minimum requirements for the connection of Customer Equipment to a public telecommunications network via the Integrated Services Digital Network (ISDN) Primary Rate Access Interface. (CT-099)
AS/ACIF S004:2004 Voice frequency performance requirements for Customer Equipment 52pp
Specifies the technical requirements for Customer Equipment (CE) that: (a) is designed or intended to transmit and receive voice frequency signals for voice communication, voice messages or tones by direct or indirect electrical or electro acoustic means; and (b) is designed or intended for connection to: (1) the Public Switched Telephone Network; or (2) a basic access or primary rate access Integrated Service Digital Network. (CT-098)
ACA TS 0311997 Requirements for ISDN Basic Access Interface 28pp Available Superseded
Defines the technical conditions and performance requirements for interference and non-interfacing interworking that Customer Equipment (CE) is to meet at the Physical Layer, Data Link and Network Layers (Layers 1, 2 and 3) for connection to an Intergrated Services Digital Network (ISDN) Basic Access Digital Subscriber Signalling No. 1 (DSS 1) interface. Subsumes requirements previously covered by AUSTEL Technical Standard 013. (CT-099)
ACA TS 0151997 General Requirements for Analogue Video Equipment Connected to a Telecommunications Network 17pp
Defines conditions and requirements for interworking of analogue video Customer Equipment connected to a public telecommunications network. Applicable to all analogue video formats including PAL, NAUSTEL TSC and MAC. Based on CCIR Recommendation 567-2, with additional material relevant to the Australian environment. (CT-099)
AS/ACIF S004 Supplement 1:2004 Voice frequency performance requirements for Customer Equipment Supplement 1: Stepped pulsed stimuli for time dependent limiting test
(CT-098)
ACA TS 0161997 General Requirements for Customer Equipment Connected to Hierarchical Digital Interfaces 64pp Available Superseded
Specifies the technical conditions and performance requirements for interfacing and non-interference interworking that privately owned, installed and maintained customer equipment will meet for connection to a telecommunications service having hierarchical digital interfaces at 2048 kbit/s, 8448 kbit/s, 34 368 kbit/s, 139 264 kbit/s, 1544 kbit/s, 6312 kbit/s, or 44 736 kbit/s. (CT-099)
ACA TS 0341997 Radio Equipment and Systems Cordless TelecommunicationsPersonal Handy Phone System (PHS) 24pp
Defines the technical conditions and requirements for the Personal Handy Phone System (PHS) personal station and cell station interworking and network compatibility, to allow for the operation of telecommunications services in the Australian environment. (CT-099)
AS/ACIF S006:2001 Requirements for Customer Equipment, operating in the voice band, for connection to the non-switched Telecommunications Network 21pp
Specifies the technical requirements for Customer Equipment (CE) that is designed or intended for connection to a non-switched Telecommunications Network presented as a cable pair interface, is designed or intended for operation in the voice frequency band and does not have a DC or out-ofband signalling capability or DC power feed. (CT-098)
ACA TS 0381997 Requirements for ISDN Primary Rate Access Interface 25pp Available Superseded
Defines technical conditions and performance requirements for interfacing and non-interference interworking that Customer Equipment (CE) is to meet at the Physical, Data Link and Network Layers (Layers 1, 2 and 3) for connection to an Integrated Services Digital Network (ISDN) Primary Rate Access Digital Subscriber Signalling No. 1 (DSS 1) interface. (CT-099)
ACA TS 0181997 Digital Cellular Mobile Telecommunications SystemGSM Mobile Station 30pp
Defines technical conditions and requirements, for noninterference interworking, that CE must meet for connection to a public GSM digital cellular mobile telecommunications system. The Standard is based upon ETSI GSM Standards. Requirements for emergency dialling, International Mobile Equipment Identity (IMEI) integrity, and radiation exposure are Australian-specific modifications. (CT-099)
ACA TS 1021998 Telecommunications Technical Standard (Customer Equipment and Customer Cabling) 12pp
Provides a vehicle for compliance labelling (under subsection 376 (1) of the Telecommunications Act 1977) of certain Customer Equipment (CE) and Customer Cabling (CC) in respect of which a permit or authorization was in force at 1 July 1997 or subsequently have been covered by ACA TS 1001997 and ACA TS 1011998. ACA TS 1021998 replaces ACA TS 1011998. (CT-099)
AS/ACIF S009:2006 Installation requirements for customer cabling (Wiring Rules) 153pp
Applies to the installation and maintenance of fixed or concealed cabling or equipment that is connected, or is intended to be connected, to a telecommunications network, including any cord or cordage, or that part of any cord or cordage, that is connected as fixed or concealed cabling. (CT-098)
ACA TS 0191997 Radio Equipment and Systems Cordless TelecommunicationsCT2 CAI 22pp
Specifies minimum performance characteristics and methods of measurement for fixed and portable radio units with the second generation cordless telephone common air interface (CT2 CAI) system. It is based on the European Telecommunications Standards Institute (ETSI) I-ETS 300 131 on radio equipment and systems common air interface specification, amended to allow operation of the equipment in the Australian environment. (CT-099)
ACIF G548:1999 Supporting arrangements for AS/ACIF S042 Requirements for connection to an air interface of a telecommunications network 4pp
Specifies the preferred behaviours for carriers, carriage service providers and equipment suppliers for supply of CE covered by AS/ACIF S042 series. In particular, it addresses the assessment of suitability for network integrity and interoperability. (CT-098)
AS/ACIF S016:2001 General requirements for Customer Equipment for connection to hierarchical digital interfaces 47pp
Specifies the technical conditions and performance requirements for interfacing and non-interference interworking that privately owned, installed and maintained Customer Equipment will meet for connection to a telecommunications service having hierarchical digital interfaces at 2048 kbit/s, 8448 kbit/s, 34 368 kbit/s and 139 264 kbit/s. (CT-098)
ACA TS 0221997 MobileSat Terminal Compatibility Requirements for System Access 16pp
Specifies the MobileSatTM terminal compatibility requirements for non-interference interworking, that customer
278
47pp
Provides details of more than 30 model projects completed or underway, which have demonstrated the worth of consultative processes, multi-skilling and other new approaches to training and work organization structures.
AS/ACIF S038:2001 Requirements for ISDN Primary Rate Access Interface 19pp
Specifies the technical conditions and performance requirements, at the Physical, Data Link and Network Layers (Layers 1, 2 and 3), for CE that is intended for connection to an ETSI Integrated Services Digital Network (ISDN) Primary Rate Access Digital Subscriber Signalling No. 1 (DDS 1) interface for the purpose of receiving information from, or transmitting information to, the ISDN at the T reference point. (CT-098)
CIDA 051993 Creating Productive Partnerships: A Win-Win Guide to Enterprise Bargaining 40pp
Provides guidelines for development of enterprise agreements in the building and construction industry.
64pp
AG 4041988 Approval requirements for LPG mobile industrial direct fired air heaters (incorporates Amendments) 79pp
Amendment 1 April 1994 Requirements for new mobile industrial direct fired air heaters, made entirely from new materials and components with gas consumption not exceeding 500 MJ/h. (AG-001)
A Guide to equal employment opportunity issues within the building and construction industry. Provides employers from major constructors to small subcontractors with information whether they seek to achieve basic compliance or aim at best practice status.
AS/ACIF S040:2001 Requirements for Customer Equipment for use with the Standard Telephone Service Features for special needs of persons with disabilities 19pp
Provides requirements for certain Customer Equipment (CE) that uses a telephone handset or a keypad, that is manufactured in, or imported into Australia for use with the Standard Telephone Service. This Standard defines the technical requirements relating to the features of the equipment that is designed to cater for some of the special needs of persons with disabilities. (CT-098)
69pp
AG 8051998 Approval requirements for natural gas vehicle (NGV) components (incorporates amendment) 45pp
Amendment 1 June 1998 Requirements for regulators, fuel lock-off valves, filling connection, fill isolating valves, non-return valves and any combination of these for use with natural gas fuelled internal combustion engines. (AG-009)
The final report of the Security of Payment Action Team to the Board of the Construction Industry Development Agency. The report includes 35 recommendations under the headings of Corporate Governance. Project Funding, Financial Evaluation, Tendering, Contractural Provisions, Administration of the Contract, and Security Under the Contract. The report includes an analysis of the comments of those respondents who did not support a particular recommendation.
AS/ACIF S041:2005 Requirements for DSL Customer Equipment for connection to the Public Switched Telephone Network 46pp
Specifies the technical requirements for Customer Equipment (CE) and in the case of Compound CE, the parts of Compound CE that are designed or intended for connection to a DSL service that shares the metallic local loop with an analogue PSTN two-wire service. (CT-098)
CIDA 091994 Building Best Practice in the Construction IndustryOverview for Clients, Consulants and Contractors 32pp
Provides the key points in building best practice in the construction industry for the managment of individual enterprises.
AS/ACIF S042 Requirements for connection to an air interface of a Telecommunications Network AS/ACIF S042.1:2006 Part 1: General 15pp
AG 8071992 Approval requirements for natural gas flexible hose and hose assemblies for pressures above 2.6 MPa 25pp
Requirements for flexible hose and hose assemblies for use with natural gas applications at working pressures above 2.6 MPa. Note: For pressures not exceeding 2.6 MPa and temperatures up to 125C refer to AS 1869. (AG-009)
CIDA 101994 Construction Industry Project Initiation Guide for Project Sponsors, Clients and Owners 32pp
Provides a framework and methods for achieving best practice project initiation. Best practice steps are identified to ensure that projects can proceed smoothly without extra delay and costs.
Applies to Customer Equipment (CE) that is designed or intended for use in connection with a public mobile telecommunications service (PMTS) and is an addressable device. (CT-098)
AG 9011996 Code of practice for NGV refuelling stations (incorporates Amendments) 94pp
Amendment 1 January 1998 Sets out uniform planning information, procedures and standards for the design, construction and operation of a compressed natural gas refuelling station operating on reticulated pipeline quality gas. It does not cover the requirements for Liquefied Natural Gas (LNG) refuelling stations. (AG-009)
3pp
Specifies the technical conditions and requirements that customer equipment must meet for connection to a public CDMA digital cellular mobile telecommunications system. It is based upon the EIA/TIA IS-95. (CT-098)
CIDA 121995 Breaking the NormLanguage, literacy and numeracy skills in the building industry 15pp
Provides case studies of companies and individuals demonstrating equal employment opportunity schemes aimed at improving language, literacy and nuneracy skills in the building industry.
8pp
CCM Volume 12007 Communications Cabling Manual Volume 1 Handbooks, codes and regulations 369pp
(CT-001)
Describes the technical conditions and requirements for GSM CE that is designed or intended for use in connection with a GSM public mobile telecommunications service (PMTS) and is an addressable device. (CT-098)
CIDA 131995 Breaking the NormAboriginal and Torres Strait Islanders in the building industry 14pp
Provides case studies studies of companies and individuals demonstrating equal employment opportunities for Aboriginal and Torres Strait Islanders in the building industry.
AS/ACIF S043 Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network AS/ACIF S043.1:2003 General 4pp
CCM Package2007 Communications Cabling Manual Package (Volumes 1 and 2) 901pp CIDA 011993 Value of Overseas Business Activity 14pp
CIDA 141995 Breaking the NormWorkers rehabilitated after injury in the building industry 13pp
Provides case studies of companies and individuals that recognize the value of rehabilitating injured employees, and encourage recovery that brings benefits to both the employee and the employer.
Describes the technical requirements for Customer Equipment (CE) that is designed or intended for connection to a Telecommunications Network via a metallic local loop interface. (CT-098)
Based on collected original data, this study reviews the value of overseas business to the Australian building and construction industry derived from investment in overseas operations.
50pp
Applies to Customer Equipment (CE) that:is designed or intended for connection to a Telecommunications Network via a metallic local loop interface; andhas a broadband capability. (CT-098)
CIDA 151995 Breaking the Norm: Women in the building trades 16pp
Provides case studies of women construction workers and demonstrating the range of career options available such as advanced tradesperson, trainer, administrator or business owner.
CIDA 161995 Breaking the Norm: Women in the building professions 18pp
Provides case studies that illustrate the capacity of women to perform in all areas of the building and construction industry.
279
CIDA 171995
CIDA 171995 The Australian Construction IndustryPreQualification Criteria for Smaller Projects 24pp
Provides a consistent framework, pre-qualification of companies to tender for work or register to tender for work for particular projects. Tailored for use on small projects of less than $5 million. those with simple demands for part-time emergency response duties through to enterprises with high fire hazards which require dedicated emergency response personnel. It covers ASF levels 1 to 5. Level 1 covers the skills needed to react safely in an emergency situation and to report problems that may lead to emergencies. The skill level becomes progressively more complex until at level 5 it covers the management of the workplace emergency team, the evacuation organization and emergency prevention activities. Published by the Fire Protection Industry Association of Australia.
65pp
This bulletin sets out the requirements and capabilities of the pise (rammed earth), adobe (mud brick) and pressedsoil block methods of earth-wall construction for specifically Australian conditions.
CIDA 191995 The Australian Construction IndustryPreQualification Criteria for Subcontractors 19pp
Provides a contractor with sufficent information about the subcontractor to enable the contractor to reach an informed opinion as to the capability of the subcontractor to carry out the work. Intended for subcontractors in excess of $100 000.
IEC Report IEC ReportMagnetically induced currents in the human body 45pp
This Technology Trends Assessment Report from the International Electrotechnology Commission reviews the present state of knowledge on the effects of electromagnetic fields on the human body, whilst acknowledging that science is not yet able to clarify all the biological effects such fields may have. It categorizes the types of possible effects into short term and long term. The specific aim of the report is to present methods for the calculation of the electric fields and associated current densities induced in the body by externally applied magnetic fields. It concludes that overhead lines and domestic appliances do not pose any field problems for the general public. To purchase, contact International Sales Department.
CIDA 201995 The Australian Construction IndustryPreQualification Criteria for Consultants 28pp
Provides a consistent framework for clients seeking to prequalify and select consultants most suitable for a specific project. Intended for use where the value of the consultancy is in excess of $250 000, and where clients wish to commission a consultant for work on a range of projects over a specified period.
NPWC31981 NPWC3: General conditions of contract WTIA TN 111998 Commentary on structural steel welding Standard AS/NZS 1554 46pp Available Superseded
This Technical Note complements the Structural Steel Welding Standards (AS 1554 Parts 1 to 5, 1992) by presenting background information that could not be included in the Standard. Since the Standard is written in the form of a technical specification, it cannot present background material or discuss the intent: it is the primary aim of this Commentary to fulfil this function. It is important that this Technical Note be read in conjunction with the Standards involved. This commentary has been prepared to generate a better understanding in the application of the Standard to welding in steel construction. Suggestions for the application, as well as clarification, of the requirements of the Standard are offered. It discusses the requirements of the Standard with particular emphasis on new or revised clauses. It serves as an educational text for students of engineering and a ready reference for the rest of us. Covers welding requirements for: carbon, low and high alloy steels; reinforcing steel for civil works; stud welding; quenched and tempered steels; structures subjected to high fatigue loading. (B-000)
CIDA 211995 Measuring Up or Muddling Through: Best Practice in the Australian Non-Residential Construction Industry 125pp
A report that presents the key results of a comprehensive survey completed by contractors and subcontractors working in the non-residential construction sector during 1994.
96pp
A cross-industry competency which sets a framework for the skills required to respond to a fire emergency in the workplace. It is suitable for a range of organizations from
280
SUBJECT INDEX
The subject headings in this index are derived from the ISO International Classification for Standards system (ICS). For convenience these headings have been re-arranged in alphabetical order, with the number and title of relevant standards also listed. A synopsis and further details of any specific Standard can then be obtained by going to the main body of the Catalogue, where Standards are listed in numerical order. For more comprehensive searching of the Standards Australia Catalogue, it is recommended that users go to the SAI Global website at infostore.saiglobal.com/store.
ACCIDENT AND DISASTER CONTROL AS 2220.11989 Emergency warning and intercommunication systems in buildingsEquipment design and manufacture AS 2293 Set2005 Emergency escape lighting and exit signs Set AS 2293.12005 Emergency escape lighting and exit signs for buildings System design, installation and operation AS/NZS 2293.1:1998 Emergency evacuation lighting for buildingsSystem design, installation and operation AS/NZS 2293.2:1995 Emergency evacuation lighting for buildings Inspection and maintenance AS 2293.32005 Emergency escape lighting and exit signs for buildings Emergency escape luminaires and exit signs AS/NZS 2293.3:1995 Emergency evacuation lighting for buildings Emergency luminaires and exit signs AS 37452002 Emergency control organization and procedures for buildings, structures and workplaces AS 37451995 Emergency control organization and procedures for buildings AS 40831997 Planning for emergenciesHealth care facilities AS 4292.72006 Railway safety managementRailway safety investigation AS 45682005 Preparation of a safety and operating plan for gas networks HB 76 (SET 100)2004 Dangerous goodsInitial emergency response guide (100 copies) HB 76 (SET 1000)2004 Dangerous goodsInitial emergency response guide (1000 copies) HB 76 (SET 50)2004 Dangerous goodsInitial emergency response guide (50 copies) HB 76 (SET 500)2004 Dangerous goodsInitial emergency response guide (500 copies) HB 762004 Dangerous goodsInitial emergency response guide HB 3242008 Lexicon of Key Terms used in Security CS FP 0011995 Fire Emergency Response ACOUSTICS AND ACOUSTIC MEASUREMENTS AS ISO 116542002 AcousticsRating of sound absorptionMaterials and systems Acoustic measurements and noise abatement in general AS ISO 3542006 AcousticsMeasurement of sound absorption in a reverberation room AS/NZS ISO 717.1:2004 AcousticsRating of sound insulation in buildings and of building elementsAirborne sound insulation AS ISO 717.22004 AcousticsRating of sound insulation in buildings and of building elementsImpact sound insulation AS 10451988 AcousticsMeasurement of sound absorption in a reverberation room AS 1055.11997 AcousticsDescription and measurement of environmental noiseGeneral procedures AS 1055.21997 AcousticsDescription and measurement of environmental noiseApplication to specific situations AS 1055.31997 AcousticsDescription and measurement of environmental noiseAcquisition of data pertinent to land use AS 11912002 AcousticsMethod for laboratory measurement of airborne sound transmission insulation of building elements AS 11911985 AcousticsMethod for laboratory measurement of airborne sound transmission loss of building partitions AS/NZS 1269.1:1998 Occupational noise management Measurement and assessment of noise immission and exposure AS/NZS 1269.4:2005 Occupational noise managementAuditory assessment AS 12761979 Methods for determination of sound transmission class and noise isolation class of building partitions AS/NZS 1276.1:1999 AcousticsRating of sound insulation in buildings and of building elementsAirborne sound insulation AS 12771983 AcousticsMeasurement procedures for ducted silencers AS/NZS 1935.1:1998 AcousticsDetermination of sound absorption coefficient and impedance in impedance tubesMethod using standing wave ratio AS/NZS 2499:2000 AcousticsMeasurements of sound insulation in buildings and of buildings elementsLaboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it AS 25332002 AcousticsPreferred frequencies and band centre frequencies AS 3657.21996 AcousticsExpression of the subjective magnitude of sound or noiseMethod for calculating loudness level AS/NZS 3817:1998 AcousticsMethods for the description and physical measurement of single impulses or series of impulses AS 42411994 AcousticsInstruments for the measurement of sound intensityMeasurement with pairs of pressure sensing microphones Electroacoustics AS ISO 389.12007 AcousticsReference zero for the calibration of audiometric equipmentReference equivalent threshold sound pressure levels for pure tones and supra-aural earphones AS ISO 389.22007 AcousticsReference zero for the calibration of audiometric equipmentReference equivalent threshold sound pressure levels for pure tones and insert earphones AS ISO 389.32007 AcousticsReference zero for the calibration of audiometric equipmentReference equivalent threshold force levels for pure tones and bone vibrators AS 1259.11990 AcousticsSound level metersNon-integrating AS 1259.21990 AcousticsSound level metersIntegrating Averaging AS/NZS 1591.1:1995 AcousticsInstrumentation for audiometry Reference zero for the calibration of pure-tone bone conduction audiometers AS/NZS 1591.4:1995 AcousticsInstrumentation for audiometryA mechanical coupler for calibration of bone vibrators AS/NZS 2399:1998 AcousticsSpecifications for personal sound exposure meters AS 29281987 Occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts AS/NZS 4476:1997 AcousticsOctave-band and fractional-octaveband-filters AS/NZS 4714:2000 Ultrasound power measurement in liquids in the frequency range 0.5 MHz to 25 MHz AS IEC 609422004 ElectroacousticsSound calibrators AS IEC 616692003 ElectroacousticsEquipment for the measurement of real-ear acoustical characteristics of hearing aids AS IEC 61672.12004 ElectroacousticsSound level meters Specifications AS IEC 61672.22004 ElectroacousticsSound level meters Pattern evaluation tests Noise emitted by machines and equipment AS 1081.11990 AcousticsMeasurement of airborne noise emitted by rotating electrical machineryEngineering method for freefield conditions over a reflective plane AS 1081.21990 AcousticsMeasurement of airborne noise emitted by rotating electrical machinerySurvey method AS 1359.1091998 Rotating electrical machinesGeneral requirementsNoise limits AS ISO 19992003 AcousticsDetermination of occupational noise exposure and estimation of noise-induced hearing impairment AS 2012.11990 AcousticsMeasurement of airborne noise emitted by earth-moving machinery and agricultural tractorsStationary test conditionDetermination of compliance with limits for exterior noise AS 2012.21990 AcousticsMeasurement of airborne noise emitted by earth-moving machinery and agricultural tractorsStationary test conditionOperator's position AS 2221.11979 Methods for measurements of airborne sound emitted by compressor units including primemovers and by pneumatic tools and machinesEngineering method for measurement of airborne sound emitted by compressor/primemover units intended for outdoor use AS 2374.61994 Power transformersDetermination of transformer and reactor sound levels
281
ADHESIVES
SUBJECT INDEX
AS 2313.1.82005 Methods of test for single and double sided pressuresensitive tapeAdhesionResistance to dynamic shear load at elevated temperature AS 2313.1.92005 Methods of test for single and double sided pressuresensitive adhesive tapeAdhesionResistance to shear peel at elevated temperature AS 2313.1.102006 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAdhesionResistance to static shear load at ambient temperature AS 2313.1.112006 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAdhesionResistance to dynamic shear load at ambient temperature AS 2313.1.122006 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAdhesionResistance to shear peel at ambient temperature AS 2313.1.132006 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAdhesionResistance to shear (holding power) at ambient temperature AS 2313.2.12005 Methods of test for single sided and double sided pressure-sensitive adhesive tapePhysical propertiesBreaking strength AS 2313.2.22005 Methods of test for single sided and double sided pressure-sensitive adhesion tapePhysical propertiesElongation AS 2313.2.32005 Methods of test for single sided and double sided pressure-sensitive adhesive tapePhysical propertiesLength AS 2313.2.42005 Methods of test for single sided and double sided pressure-sensitive adhesive tapePhysical propertiesThickness AS 2313.2.52005 Methods of test for single sided and double sided pressure-sensitive adhesive tapePhysical propertiesWater vapour transmission AS 2313.2.62006 Methods of test for single sided and double sided pressure-sensitive adhesive tapePhysical propertiesDetermining the thickness of release liner AS 2313.2.72006 Methods of test for single sided and double sided pressure-sensitive adhesive tapePhysical propertiesDetermining grammage of release liner AS 2313.3.12005 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAgeing propertiesAccelerated ageing AS 2313.3.22005 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAgeing propertiesStability of cellulose tape by accelerated ageing AS 2313.3.32005 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAgeing propertiesMending stability AS 2313.3.42005 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAgeing propertiesDetermination of resistance to accelerated ageing by artificial light AS 2313.3.52006 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAgeing propertiesDetermining dimensional stability of label stock AS 2313.4.12006 Methods of test for single sided and double sided pressure-sensitive adhesive tapePrinting propertiesDetermining indelibility of printed labels AS 2313.4.22006 Methods of test for single sided and double sided pressure-sensitive adhesive tapePrinting propertiesDetermining lightfastness of printed labels AS 2313.4.32006 Methods of test for single sided and double sided pressure-sensitive adhesive tapePrinting propertiesDetermining abrasive resistance AS 23291999 Mastic adhesives for fixing wallboards AS 23581990 AdhesivesFor fixing ceramic tiles AS 2400.141985 PackagingAdhesives AS/NZS 2754.1(Int):2008 Adhesives for timber and timber products Adhesives for manufacture of plywood and laminated veneer lumber (LVL) AS 2754.21991 Adhesives for timber and timber productsPolymer emulsion adhesives AS 36911989 Solvent cement and priming (cleaning) fluids for use with ABS pipes and fittings AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings AS/NZS 4364(Int):2007 TimberBond performance of structural adhesives AS/NZS 4364:1996 Adhesives, phenolic and aminoplastic for load-bearing timber structures: Classification and performance requirements AS 48332007 Pressure-sensitive labels for stock-paper, stock-plastic and general purpose use ADMINISTRATION see LAW. ADMINISTRATION AEROSOL CONTAINERS AS 2278.12008 Aerosol containersMetal aerosol dispensers of capacity 50 mL to 1000 mL inclusive
AS 24361981 Guide to noise control on construction, maintenance and demolition sites AS 2991.21991 AcousticsMethod for the determination of airborne noise emitted by household and similar electrical appliancesParticular requirements for dishwashers AS 35341988 AcousticsMethods for measurement of airborne noise emitted by powered lawnmowers, edge and brush cutters and string trimmers AS 37551990 AcousticsMeasurement of airborne noise emitted by computer and business equipment AS 37561990 AcousticsMeasurement of high-frequency noise emitted by computer and business equipment AS 37571990 AcousticsDeclared noise emission values of computers and business equipment AS 37811990 AcousticsNoise labelling of machinery and equipment AS 3782.11990 AcousticsStatistical methods for determining and verifying stated noise emission values of machinery and equipmentGeneral considerations and definitions AS 3782.21990 AcousticsStatistical methods for determining and verifying stated noise emission values of machinery and equipmentMethods for stated values for individual machines AS 3782.31990 AcousticsStatistical methods for determining and verifying stated noise emission values of machinery and equipmentSimple (transition) method for stated values for batches of machines AS 3782.41990 AcousticsStatistical methods for determining and verifying stated noise emission values of machinery and equipmentMethods for stated values for batches of machines AS/NZS 4194:1994 Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment AS 47482001 Acoustic emission testing of fibreglass-insulated booms on elevating work platforms Noise emitted by means of transport AS 20212000 AcousticsAircraft noise intrusionBuilding siting and construction AS 22541988 AcousticsRecommended noise levels for various areas of occupancy in vessels and offshore mobile platforms AS 23631999 AcousticsMeasurement of noise from helicopter operations AS 23772002 AcousticsMethods for the measurement of railbound vehicle noise AS 27021984 AcousticsMethods for the measurement of road traffic noise AS 36711989 AcousticsRoad traffic noise intrusionBuilding siting and construction ADHESIVES AS 1157.101999 Methods of testing materials for resistance to fungal growthResistance of dried or cured adhesives and glues to fungal growth AS 12301993 Pressure-sensitive adhesive tapeGlossary of terms AS 15992006 Pressure-sensitive and water activated adhesive tape for packaging and office applications AS 1937.11991 Methods of test for sealers and adhesives for automotive purposesDetermination of flow properties in absolute units AS 1937.91991 Methods of test for sealers and adhesives for automotive purposesDetermination of shear strength of metal-to-metal adhesive AS 2313.02006 Methods of test for single sided and double sided pressuresensitive adhesive tapeMethod selection guide AS 2313.1.12005 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAdhesionPeel adhesion AS 2313.1.22005 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAdhesionQuickstick AS 2313.1.32005 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAdhesionRolling ball tack AS 2313.1.42005 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAdhesionAdhesion strength after immersion AS 2313.1.52005 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAdhesionAdhesion strength to own backing AS 2313.1.62005 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAdhesionUnwind force AS 2313.1.72005 Methods of test for single sided and double sided pressure-sensitive adhesive tapeAdhesionResistance to static shear load at elevated temperature
282
SUBJECT INDEX
AGRICULTURAL MACHINES, IMPLEMENTS AND EQUIPMENT Agricultural machines and equipment in general AS 17371975 Dimensions of scarifier share mountings AS/NZS 2153.1:1997 Tractors and machinery for agriculture and forestryTechnical means for ensuring safetyGeneral AS/NZS 2153.3:1997 Tractors and machinery for agriculture and forestryTechnical means for ensuring safetyTractors AS/NZS 2153.4:1997 Tractors and machinery for agriculture and forestryTechnical means for ensuring safetyForestry winches AS/NZS 2153.5:1997 Tractors and machinery for agriculture and forestryTechnical means for ensuring safetyPower-driven soil-working equipment AS/NZS 2153.6:1998 Tractors and machinery for agriculture and forestryTechnical means for ensuring safetyEquipment for crop protection AS/NZS 2153.7:1997 Tractors and machinery for agriculture and forestryTechnical means for ensuring safetyCombine harvesters, forage and cotton harvesters AS/NZS 2153.9:1997 Tractors and machinery for agriculture and forestryTechnical means for ensuring safetyEquipment for sowing, planting and distributing fertilizers Agricultural tractors and trailed vehicles AS 1121.12007 Agricultural tractor power take-offsRear-mounted power take-off types 1, 2 and 3General specifications, safety requirements, dimensions for master shield and clearance zone AS 1121.22007 Agricultural tractor power take-offsRear-mounted power take-off types 1, 2 and 3Narrow-track tractors, dimensions for master shield and clearance zone AS 1121.32007 Agricultural tractor power take-offsRear-mounted power take-off types 1, 2 and 3Main PTO dimensions and spline dimensions, location of PTO AS 1121.42007 Agricultural tractor power take-offsGuards for power take-off (PTO) drive-shaftsStrength and wear tests and acceptance criteria AS 1636.11996 TractorsRoll-over protective structuresCriteria and testsConventional tractors AS 1636.21996 TractorsRoll-over protective structuresCriteria and testsRear-mounted for narrow-track tractors AS 1636.31996 TractorsRoll-over protective structuresCriteria and testsMid-mounted for narrow-track tractors AS 2012.11990 AcousticsMeasurement of airborne noise emitted by earth-moving machinery and agricultural tractorsStationary test conditionDetermination of compliance with limits for exterior noise AS 2012.21990 AcousticsMeasurement of airborne noise emitted by earth-moving machinery and agricultural tractorsStationary test conditionOperator's position Forestry equipment AS 2726.12004 ChainsawsSafety requirementsChainsaws for general use AS 2726.22004 ChainsawsSafety requirementsChainsaws for tree service AS 27271997 ChainsawsGuide to safe working practices AS 35751995 Clearing saws, brushcutters and grass trimmers Safety requirements AS/NZS 3576:1998 Clearing saws, brushcutters and grass trimmersGuide to safe working practices AS/NZS 60745.2.13:2006 Hand-held Motor-operated Electric ToolsSafetyParticular requirements for chain saws Horticultural equipment AS 26571985 Powered rotary lawnmowers AS 35341988 AcousticsMethods for measurement of airborne noise emitted by powered lawnmowers, edge and brush cutters and string trimmers AS 36321993 Powered rotary lawnmowersBlades and blade mounting attachments AS 3792.11990 Ride-on lawnmowersPowered rotary ride-on mowers AS 40571992 Powered walk-behind and hand-held lawn trimmers and lawn edge trimmersMechanical safety requirements and test methods AS/NZS 60335.2.77:2002 Household and similar electrical appliancesSafetyParticular requirementsParticular requirements for pedestrian controlled mains-operated lawnmowers AS/NZS 60335.2.91:2008 Household and similar electrical appliancesSafetyParticular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers (IEC 603352-91 Ed 3, MOD)
AS/NZS 60335.2.91:2002 Household and similar electrical appliancesSafetyParticular requirementsParticular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers AS/NZS 60335.2.92:2003 Household and Similar Electrical AppliancesSafety- Particular requirements for pedestriancontrolled mains-operated lawn scarifiers and aerators Irrigation and drainage equipment AS 2698.22000 Plastics pipes and fittings for irrigation and rural applicationsPolyethylene rural pipe AS 2698.31990 Plastics pipes and fittings for irrigation and rural applicationsMechanical joint fittings for use with polyethylene micro-irrigation pipes AIDS FOR DISABLED OR HANDICAPPED PERSONS AS 1428.41992 Design for access and mobilityTactile ground surface indicators for the orientation of people with vision impairment AS 29421994 Wheelchair occupant restraint assemblies for motor vehicles AS 36931989 WheelchairsNomenclature, terms and definitions AS 36951992 WheelchairsProduct requirements AS/NZS 3696.1:2008 WheelchairsDetermination of static stability AS/NZS 3696.2:2008 WheelchairsDetermination of dynamic stability of electric wheelchairs AS/NZS 3696.3:2008 WheelchairsDetermination of effectiveness of brakes AS 3696.41992 WheelchairsDetermination of energy consumption of electric wheelchairs AS 3696.51989 WheelchairsDetermination of overall dimensions, mass and turning space AS 3696.61990 WheelchairsDetermination of maximum speed, acceleration and retardation of electric wheelchairs AS/NZS 3696.8:1998 WheelchairsRequirements and test methods for static, impact and fatigue strengths AS/NZS 3696.9:2008 WheelchairsClimatic tests for electric wheelchairs (ISO 7176-9:2001, MOD) AS 3696.101990 WheelchairsDetermination of obstacle-climbing ability of electric wheelchairs AS 3696.111993 WheelchairsTest dummies AS 3696.131991 WheelchairsDetermination of coefficient of friction of test surfaces AS/NZS 3696.14:1998 WheelchairsPower and control systems for electric wheelchairsRequirements and test methods AS/NZS 3696.21:2008 WheelchairsRequirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters AS/NZS 3696.22:2008 WheelchairsSet-up procedures AS/NZS 3696.23:2008 WheelchairsRequirements and test methods for attendant-operated stair-climbing devices AS/NZS 3696.24:2008 WheelchairsRequirements and test methods for user-operated stair-climbing devices AS/NZS 3856.1:1998 Hoists and ramps for people with disabilitiesVehiclemountedProduct requirements AS/NZS 3856.2:1998 Hoists and ramps for people with disabilitiesVehiclemountedInstallation requirements AS 3954.11991 Motor vehicle controlsAdaptive systems for people with disabilitiesGeneral requirements AS 3954.21991 Motor vehicle controlsAdaptive systems for people with disabilitiesHand controlsProduct requirements AS/NZS 3973:2005 Shower/toilet chairs (mobile and static) AS 40691993 BathseatsProduct requirements AS/NZS 4277:1995 Text telecommunicationsUser interface requirements For Deaf people and people with hearing and speech disabilities AS 46071999 Personal response systems Aids and adaptation for moving AS 29421994 Wheelchair occupant restraint assemblies for motor vehicles AS 36931989 WheelchairsNomenclature, terms and definitions AS 36951992 WheelchairsProduct requirements AS/NZS 3696.1:2008 WheelchairsDetermination of static stability AS/NZS 3696.2:2008 WheelchairsDetermination of dynamic stability of electric wheelchairs AS 3696.41992 WheelchairsDetermination of energy consumption of electric wheelchairs AS 3696.51989 WheelchairsDetermination of overall dimensions, mass and turning space AS 3696.61990 WheelchairsDetermination of maximum speed, acceleration and retardation of electric wheelchairs
283
AIR QUALITY
SUBJECT INDEX
AIR QUALITY Air quality in general AS 2365.1.11990 Methods for the sampling and analysis of indoor airDetermination of nitrogen dioxideSpectrophotometric methodTreated mesh/passive tube sampling procedures AS 2365.1.21990 Methods for the sampling and analysis of indoor airDetermination of nitrogen dioxideSpectrophotometric methodTreated filter/passive badge sampling procedures AS 2365.21993 Methods for the sampling and analysis of indoor airDetermination of carbon monoxideDirect-reading portable instrument method AS 2365.41995 Methods for the sampling and analysis of indoor airDetermination of radon AS 2365.61995 Methods for the sampling and analysis of indoor airDetermination of formaldehydeImpinger sampling Chromotropic acid method AS 2365.72006 Methods for sampling and analysis of indoor air Determination of total suspended particulate matterGravimetric method Ambient atmospheres AS 2724.51987 Ambient airParticulate matterDetermination of impinged matter expressed as directional dirtiness, background dirtiness and/or area dirtiness (directional dust gauge method) AS 28001985 Ambient airDetermination of particulate leadHigh volume sampler gravimetric collectionFlame atomic absorption spectrometric method AS 29231987 Ambient airGuide for measurement of horizontal wind for air quality applications AS/NZS 3580.1.1:2007 Methods for sampling and analysis of ambient airGuide to siting air monitoring equipment AS 3580.2.21990 Methods for sampling and analysis of ambient airPreparation of reference test atmospheresCompressed gas method AS 3580.3.11990 Methods for sampling and analysis of ambient airDetermination of acid gasesTitrimetric method AS 3580.4.12008 Methods of sampling and analysis of ambient airDetermination of sulfur dioxideDirect reading instrumental method AS 3580.5.11993 Methods for sampling and analysis of ambient airDetermination of oxides of nitrogenChemiluminescence method AS 3580.6.11990 Methods for sampling and analysis of ambient airDetermination of ozoneDirect-reading instrumental method AS 3580.7.11992 Methods for sampling and analysis of ambient airDetermination of carbon monoxideDirect-reading instrumental method AS 3580.8.11990 Methods for sampling and analysis of ambient airDetermination of hydrogen sulfideAutomatic intermittent samplingGas chromatographic method AS/NZS 3580.9.3:2003 Methods for sampling and analysis of ambient airDetermination of suspended particulate matterTotal suspended particulate matter (TSP)High volume sampler gravimetric method AS/NZS 3580.9.6:2003 Methods for sampling and analysis of ambient airDetermination of suspended particulate matterPM10 high volume sampler with size-selective inletGravimetric method AS 3580.9.71990 Methods for sampling and analysis of ambient airDetermination of suspended particulate matterPM10 dichotomous samplerGravimetric method AS 3580.9.82008 Methods for sampling and analysis of ambient airDetermination of suspended particulate matterPM10 continuous direct mass method using a tapered element oscillating microbalance analyser AS/NZS 3580.9.9:2006 Methods for sampling and analysis of ambient airDetermination of suspended particulate matterPM10 low volume samplerGravimetric method AS/NZS 3580.9.10:2006 Methods for sampling and analysis of ambient airDetermination of suspended particulate matterPM 2.5 low volume samplerGravimetric method AS/NZS 3580.9.11:2008 Methods for sampling and analysis of ambient airDetermination of suspended particulate matterPM10 beta attenuation monitors AS/NZS 3580.10.1:2003 Methods for sampling and analysis of ambient airDetermination of particulate matterDeposited matter Gravimetric method
AS/NZS 3696.8:1998 WheelchairsRequirements and test methods for static, impact and fatigue strengths AS 3696.101990 WheelchairsDetermination of obstacle-climbing ability of electric wheelchairs AS 3696.111993 WheelchairsTest dummies AS 3696.131991 WheelchairsDetermination of coefficient of friction of test surfaces AS/NZS 3696.14:1998 WheelchairsPower and control systems for electric wheelchairsRequirements and test methods AS/NZS 3696.21:2008 WheelchairsRequirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters AS/NZS 3696.22:2008 WheelchairsSet-up procedures AS/NZS 3696.23:2008 WheelchairsRequirements and test methods for attendant-operated stair-climbing devices AS/NZS 3696.24:2008 WheelchairsRequirements and test methods for user-operated stair-climbing devices AS 3954.11991 Motor vehicle controlsAdaptive systems for people with disabilitiesGeneral requirements AS 3954.21991 Motor vehicle controlsAdaptive systems for people with disabilitiesHand controlsProduct requirements AS/NZS 3973:2005 Shower/toilet chairs (mobile and static) Aids for blind or partially sighted people AS/NZS 4277:1995 Text telecommunicationsUser interface requirementsFor Deaf people and people with hearing and speech disabilities Aids for deaf and hearing impaired people AS 1088.31987 Hearing aidsHearing aid equipment not entirely worn on the listener AS 1088.51987 Hearing aidsNipples for insert earphones AS/NZS 1088.9:1995 Hearing aidsImmunity requirements and methods of measurement for hearing aids exposed to radiofrequency fields in the frequency range 300 MHz to 3 GHz AS ISO 121242003 AcousticsProcedures for the measurement of real-ear acoustical characteristics of hearing aids AS 60118.02007 Hearing aidsMeasurement of electroacoustical characteristics AS 60118.12007 Hearing aidsHearing aids with induction pick-up coil input AS 60118.22007 Hearing aidsHearing aids with automatic gain control circuits AS 60118.42007 Hearing aidsMagnetic field strength in audiofrequency induction loops for hearing aid purposes AS 60118.62007 Hearing aidsCharacteristics of electrical input circuits for hearing aids AS 60118.72007 Hearing aidsMeasurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes AS 60118.82007 Hearing aidsMethods of measurement of performance characteristics of hearing aids under simulated in situ working conditions AS 60118.92007 Hearing aidsMethods of measurement of characteristics of hearing aids with bone vibrator output AS 60118.122007 Hearing aidsDimensions of electrical connector systems AS 60118.142007 Hearing aidsSpecification of a digital interface device Aids for disabled and handicapped persons in general AS/NZS 3696.3:2008 WheelchairsDetermination of effectiveness of brakes AS/NZS 3696.9:2008 WheelchairsClimatic tests for electric wheelchairs (ISO 7176-9:2001, MOD) AS 40691993 BathseatsProduct requirements AS EN 121822002 Technical aids for disabled personsGeneral requirements and test methods Other standards related to aids for disabled and handicapped people AS/NZS 3856.1:1998 Hoists and ramps for people with disabilities Vehicle-mountedProduct requirements AS/NZS 3856.2:1998 Hoists and ramps for people with disabilities Vehicle-mountedInstallation requirements AS 46071999 Personal response systems
284
SUBJECT INDEX
AS 3580.11.11993 Methods for sampling and analysis of ambient airDetermination of volatile organic compoundsMethane and non-methane volatile organic compoundsDirect-reading instrumental method AS/NZS 3580.12.1:2001 Methods for sampling and analysis of ambient airDetermination of light scatteringIntegrating nephelometer method AS 3580.13.11993 Methods for sampling and analysis of ambient airDetermination of fluoridesGaseous and acid-soluble particulate fluoridesAutomated, double paper tape sampling AS 3580.13.21991 Methods for sampling and analysis of ambient airDetermination of fluoridesGaseous and acid-soluble particulate fluoridesManual, double filter paper sampling Cleanrooms and associated controlled environments AS 1386.11989 Cleanrooms and clean workstationsPrinciples of clean space control AS 1386.21989 Cleanrooms and clean workstationsLaminar flow cleanrooms AS 1386.31989 Cleanrooms and clean workstationsNon-laminar flow cleanroomsClass 350 and cleaner AS 1386.41989 Cleanrooms and clean workstationsNon-laminar flow cleanroomsClass 3500 AS 1386.51989 Cleanrooms and clean workstationsClean workstations AS 1386.61989 Cleanrooms and clean workstationsOperation and inspection of cleanrooms AS 1386.71989 Cleanrooms and clean workstationsInstallation and use of clean workstations AS 1807.02000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testList of methods and apparatus AS 1807.12000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of air velocity and uniformity of air velocity in clean workstations, laminar flow safety cabinets and pharmaceutical isolators AS 1807.22000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of performance of clean workstations, laminar flow safety cabinets and pharmaceutical isolators under loaded filter conditions AS 1807.32000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of air velocity and uniformity of air velocity in laminar flow cleanrooms AS 1807.42000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of performance of laminar flow cleanrooms under loaded filter conditions AS 1807.52000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of work zone integrity AS 1807.62000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of integrity of terminally mounted HEPA filter installations AS 1807.72000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of integrity of HEPA filter installations not terminally mounted AS 1807.82000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testParticle counting in work zone by automatic particle counter AS 1807.102000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of air pressure of cleanrooms and pharmaceutical isolators AS 1807.112000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of airflow parallelism in laminar flow cleanrooms AS 1807.122000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of temperature in work zones AS 1807.132000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of relative humidity in cleanrooms AS 1807.152000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of illuminance AS 1807.162000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of sound level in cleanrooms AS 1807.172000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of vibration in cleanrooms
AIR QUALITY
AS 1807.182000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of vibration in workstations, safety cabinets and pharmaceutical isolators AS 1807.202000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of sound level at installed workstations, safety cabinets and pharmaceutical isolators AS 1807.212000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of inward air velocity of Class I biological safety cabinets AS 1807.222000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of air barrier containment of laminar flow safety cabinets AS 1807.232000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of intensity of radiation from germicidal ultraviolet lamps AS 1807.242000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of recovery times of cleanrooms AS 1807.252004 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of gas tightness of outer shell of biological safety cabinets and pharmaceutical isolators AS 1807.251990 Cleanrooms, workstations and safety cabinets Methods of testDetermination of gas tightness of outer shell of biological safety cabinets AS 1807.262004 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of air barrier containment of laminar flow safety cabinetsPotassium iodidediscus test AS 2252.12002 Biological safety cabinetsBiological safety cabinets (Class I) for personnel and environment protection AS 2252.22004 Biological safety cabinetsLaminar flow biological safety cabinets (Class II) for personnel, environment and product protection AS 2252.21994 Biological safety cabinetsLaminar flow biological safety cabinets (Class II) for personnel, environment and product protection AS 25672002 Laminar flow cytotoxic drug safety cabinets AS 26391994 Laminar flow cytotoxic drug safety cabinets Installation and use AS/NZS 2647:2000 Biological safety cabinetsInstallation and use AS 42731999 Design, installation and use of pharmaceutical isolators AS/NZS ISO 14644.1:2002 Cleanrooms and associated controlled environmentsClassification and air cleanliness AS/NZS 14644.2:2002 Cleanrooms and associated controlled environmentsSpecifications for testing and monitoring to prove continued compliance with ISO 14644-1 (ISO 14644-2:2000, MOD) AS/NZS ISO 14644.4:2002 Cleanrooms and associated controlled environmentsDesign, construction and start-up AS/NZS ISO 14644.5:2006 Cleanrooms and associated controlled environmentsOperations AS/NZS ISO 14644.7:2006 Cleanrooms and associated controlled environmentsSeparative devices (clean air hoods, gloveboxes, isolators and mini-environments) Other standards related to air quality AS 42601997 High efficiency particulate air (HEPA) filters Classification, construction and performance Stationary source emissions AS 4323.11995 Stationary source emissionsSelection of sampling positions AS 4323.21995 Stationary source emissionsDetermination of total particulate matterIsokinetic manual samplingGravimetric method AS/NZS 4323.3:2001 Stationary source emissionsDetermination of odour concentration by dynamic olfactometry Workplace atmospheres AS 1386.11989 Cleanrooms and clean workstationsPrinciples of clean space control AS 1386.21989 Cleanrooms and clean workstationsLaminar flow cleanrooms AS 1386.31989 Cleanrooms and clean workstationsNon-laminar flow cleanroomsClass 350 and cleaner AS 1386.41989 Cleanrooms and clean workstationsNon-laminar flow cleanroomsClass 3500
285
AIR-CONDITIONERS
SUBJECT INDEX
AS 1807.262004 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of air barrier containment of laminar flow safety cabinetsPotassium iodidediscus test AS 2252.22004 Biological safety cabinetsLaminar flow biological safety cabinets (Class II) for personnel, environment and product protection AS 2252.21994 Biological safety cabinetsLaminar flow biological safety cabinets (Class II) for personnel, environment and product protection AS 26391994 Laminar flow cytotoxic drug safety cabinets Installation and use AS/NZS 2647:2000 Biological safety cabinetsInstallation and use AS 29852004 Workplace atmospheresMethod for sampling and gravimetric determination of respirable dust AS 2986.12003 Workplace air qualitySampling and anlysis of volatile organic compounds by solvent desorption/gas chromatographyPumped sampling method AS 2986.22003 Workplace air qualitySampling and anlysis of volatile organic compounds by solvent desorption/gas chromatographyDiffusive sampling method AS 36402004 Workplace atmospheresMethod for sampling and gravimetric determination of inhalable dust AS 42731999 Design, installation and use of pharmaceutical isolators AIR-CONDITIONERS see VENTILATORS. FANS. AIR-CONDITIONERS AIRCRAFT AND SPACE VEHICLES IN GENERAL AS 20212000 AcousticsAircraft noise intrusionBuilding siting and construction AS 23631999 AcousticsMeasurement of noise from helicopter operations ALARM AND WARNING SYSTEMS AS 16701986 Automatic fire detection and alarm systemsSystem design, installation, and commissioning AS 1670.12004 Fire detection, warning, control and intercom systems System design, installation and commissioningFire AS 1670.11995 Fire detection, warning, control and intercom systems System design, installation and commissioningFire AS 1670.21997 Fire detection, warning, control and intercom systems System design, installation and commissioningLocal fire AS 1670.32004 Fire detection, warning, control and intercom systems System design, installation and commissioningFire alarm monitoring AS 1670.31997 Fire detection, warning control and intercom systems System, design, installation and commissioningMonitoring network performance AS 1670.42004 Fire detection, warning, control and intercom systems System design, installation and commissioningSound systems and intercom systems for emergency purposes AS 1670.61997 Fire detection, warning, control and intercom systems System design, installation and commissioningSmoke alarms AS 1851.81987 Maintenance of fire protection equipmentAutomatic fire detection and alarm systems AS 1851.8 Supplement 11990 Maintenance of fire protection equipment Automatic fire detection and alarm systemsSystem certificates and maintenance records (Supplement to AS 1851.81987) AS 1851.101989 Maintenance of fire protection equipmentEmergency warning and intercommunication systems AS 1851.151997 Maintenance of fire protection equipmentLocal fire alarm systems AS/NZS 2201 Set:2008 Intruder alarm systems Set AS/NZS 2201.1:2007 Intruder alarm systemsClient's premisesDesign, installation, commissioning and maintenance AS/NZS 2201.5:2008 Intruder alarm systemsAlarm transmission systems AS 2220.11989 Emergency warning and intercommunication systems in buildingsEquipment design and manufacture AS 2362.252004 Fire detection, warning, control and intercom systems Methods of testIndicator visibility test AS/NZS 2394:1994 Conditioning equipment for the treatment of nocturnal enuresis (bedwetting) AS 37861993 Smoke alarms AS 37901992 Portable warning triangles for motor vehicles AS 38111998 Hard-wired patient alarm systems AS/NZS 4280.1:2003 406 MHz satellite distress beaconsMarine emergency position-indicating radio beacons (EPIRBs) (IEC 61097-2:2002, MOD) AS/NZS 4280.2:2003 406 MHz satellite distress beaconsPersonal locator beacons (PLBs)
AS 1386.51989 Cleanrooms and clean workstationsClean workstations AS 1386.61989 Cleanrooms and clean workstationsOperation and inspection of cleanrooms AS 1386.71989 Cleanrooms and clean workstationsInstallation and use of clean workstations AS 1807.02000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testList of methods and apparatus AS 1807.12000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of air velocity and uniformity of air velocity in clean workstations, laminar flow safety cabinets and pharmaceutical isolators AS 1807.22000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of performance of clean workstations, laminar flow safety cabinets and pharmaceutical isolators under loaded filter conditions AS 1807.32000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of air velocity and uniformity of air velocity in laminar flow cleanrooms AS 1807.42000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of performance of laminar flow cleanrooms under loaded filter conditions AS 1807.52000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of work zone integrity AS 1807.62000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of integrity of terminally mounted HEPA filter installations AS 1807.72000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of integrity of HEPA filter installations not terminally mounted AS 1807.82000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testParticle counting in work zone by automatic particle counter AS 1807.102000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of air pressure of cleanrooms and pharmaceutical isolators AS 1807.112000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of airflow parallelism in laminar flow cleanrooms AS 1807.122000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of temperature in work zones AS 1807.132000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of relative humidity in cleanrooms AS 1807.152000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of illuminance AS 1807.162000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of sound level in cleanrooms AS 1807.172000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of vibration in cleanrooms AS 1807.182000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of vibration in workstations, safety cabinets and pharmaceutical isolators AS 1807.202000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of sound level at installed workstations, safety cabinets and pharmaceutical isolators AS 1807.212000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of inward air velocity of Class I biological safety cabinets AS 1807.222000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of air barrier containment of laminar flow safety cabinets AS 1807.232000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of intensity of radiation from germicidal ultraviolet lamps AS 1807.242000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolatorsMethods of testDetermination of recovery times of cleanrooms AS 1807.251990 Cleanrooms, workstations and safety cabinets Methods of testDetermination of gas tightness of outer shell of biological safety cabinets
286
SUBJECT INDEX
AS/NZS 4330:2006 121.5 and 243.0 MHz emergency position indicating radio beacons (EPIRBs) including personal EPIRBs AS 4428.01997 Fire detection, warning, control and intercom systems Control and indicating equipmentGeneral requirements and test methods AS 4428.11998 Fire detection, warning, control and intercom systems Control and indicating equipmentFire AS 4428.32004 Fire detection, warning, control and intercom systems Control and indicating equipmentFire brigade panel AS 4428.42004 Fire detection, warning, control and intercom systems Control and indicating equipmentIntercommunication systems for emergency purposes AS 4428.51998 Fire detection, warning, control and intercom systems Control and indicating equipmentPower supply units AS 4428.61997 Fire detection, warning, control and intercom systems Control and indicating equipmentAlarm signalling equipment AS 4428.71999 Fire detection, warning, control and intercom systems Control and indicating equipmentAir-handling fire mode control panel AS 4428.92006 Fire detection, warning, control and intercom systems Control and indicating equipmentRequirements for wire-free alarm zone circuits AS 4428.101998 Fire detection, warning, control and intercom systems Control and indicating equipmentAlarm investigation AS 46071999 Personal response systems AS 4806 Set2008 CCTV Set AS 4806.12006 Closed circuit television (CCTV)Management and operation AS 4806.22006 Closed circuit television (CCTV)Application guidelines AS 4806.32006 Closed circuit television (CCTV)PAL signal timings and levels AS 4806.42008 Closed circuit television (CCTV)Remote video AS 7240.12007 Fire detection and alarm systemsGeneral and definitions AS 7240.22004 Fire detection and alarm systemsControl and indicating equipment (ISO 7240-2:2003, MOD) AS 7240.42004 Fire detection and alarm systemsPower supply equipment (ISO 7240-4:2003, MOD) AS 7240.52004 Fire detection and alarm systemsPoint type heat detectors (ISO7240-5:2003, MOD) AS 7240.82007 Fire detection and alarm systemsCarbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor AS 7240.102007 Fire detection and alarm systemsPoint-type flame detectors AS 7240.112008 Fire detection and alarm systemsManual call points (ISO 7240-11:2005, MOD) AS 7240.122007 Fire detection and alarm systemsLine type smoke detectors using a transmitted optical beam AS 7240.152004 Fire detection and alarm systemsMultisensor fire detectors (ISO7240-15:2004,MOD) AS 7240.222008 Fire detection and alarm systemsSmoke-detection equipment for ducts (ISO 7240-22:2007, MOD) AS/NZS 60079.29.1:2008 Explosive atmospheresGas detectors Performance requirements of detectors for flammable gases AS/NZS 60079.29.2:2008 Explosive atmospheresGas detectorsSelection, installation, use and maintenance of detectors for flammable gases and oxygen AS 608492004 Sound systems for emergency purposes (IEC 60849:1998 MOD) HB 1231999 Guidelines for the selection, location and installation of visual warning devices in buildings ANALYTICAL CHEMISTRY Chemical analysis AS 26671983 Chemical testingSamplingGlossary of terms AS 28501986 Chemical analysisInterlaboratory test programs For determining precision of analytical method(s)Guide to the planning and conduct AS 3515.42007 Gold and gold bearing alloysDetermination of gold content (greater than 99.95%)Inductively coupled plasmaAtomic emission spectrometry AS 3853.12006 Health and safety in welding and allied processesSampling of airborne particles and gases in the operators breathing zoneSampling of airborne particles AS 3853.22006 Health and safety in welding and allied processesSampling of airborne particles and gases in the operators breathing zoneSampling of gases
ANALYTICAL CHEMISTRY
AS 41192007 Determination of platinum and palladium in gold and gold bearing alloysFlame atomic absorption spectrometry (FAAS) or inductively coupled plasma-atomic emission spectrometry (ICP-AES) (fire assay methods) AS 49642004 Method for the qualitative identification of asbestos in bulk samples AS ISO 142372006 Surface chemical analysisSecondary-ion mass spectrometryDetermination of boron atomic concentration in silicon using uniformly doped materials AS ISO 146062006 Surface chemical analysisSputter depth profilingOptimization using layered systems as reference materials AS ISO 149752006 Surface chemical analysisInformation formats AS ISO 149762006 Surface chemical analysisData transfer format AS ISO 154702006 Surface chemical analysisX-ray photoelectron spectroscopyDescription of selected instrumental performance parameters AS ISO 154722006 Surface chemical analysisX-ray photoelectron spectrometersCalibration of energy scales AS ISO 175602006 Surface chemical analysisSecondary-ion mass spectrometryMethod for depth profiling of boron in silicon AS ISO 179742006 Surface chemical analysisHigh-resolution Auger electron spectrometersCalibration of energy scales for elemental and chemical-state analysis AS ISO 181142006 Surface chemical analysisSecondary-ion mass spectrometryDetermination of relative sensitivity factors from ion-implanted reference materials AS ISO 181152006 Surface chemical analysisVocabulary AS ISO 181162006 Surface chemical analysisGuidelines for preparation and mounting of specimens for analysis AS ISO 181182006 Surface chemical analysisAuger electron spectroscopy and X-ray photoelectron spectroscopyGuide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials AS ISO 193182006 Surface chemical analysisX-ray photoelectron spectroscopyReporting of methods used for charge control and charge correction AS ISO 193192006 Surface chemical analysisAugur electron spectroscopy and X-ray photoelectron spectroscopy Determination of lateral resolution, analysis area and sample area viewed by the analyser AS ISO 220482006 Surface chemical analysisInformation format for static secondary-ion mass spectrometry AS ISO 242372006 Surface chemical analysisX-ray photoelectron spectroscopyRepeatability and constancy of intensity scale HB 151988 Chemical analysis indexA keyword listing of methods described or cited in Australian Standards (Chemdex) HB 295.3.82008 Product Safety FrameworkVolatile compounds content HB 295.3.92008 Product Safety FrameworkFormaldehyde release HB 295.3.102008 Product Safety FrameworkRelease of Bisphenol A HB 295.3.112008 Product Safety FrameworkRelease of chemicalsMigration of certain elements HB 295.3.122008 Product Safety FrameworkRelease of NNitrosamines and N-Nitrosatables HB 295.3.132008 Product Safety FrameworkRelease of nickel HB 295.3.172008 Product Safety FrameworkPhthalate content Chemical laboratories. Laboratory equipment AS 16812002 Safety requirements for electrically heated Type 1 ovens in which flammable volatiles can occur AS/NZS 2243 Set:2006 Safety in laboratories Set AS/NZS 2243.1:2005 Safety in laboratoriesPlanning and operational aspects AS/NZS 2243.2:2006 Safety in laboratoriesChemical aspects AS/NZS 2243.3:2002 Safety in laboratoriesMicrobiological aspects and containment facilities AS 2243.41998 Safety in laboratoriesIonizing radiations AS/NZS 2243.5:2004 Safety in laboratoriesNon-ionizing radiationsElectromagnetic, sound and ultrasound AS 2243.61990 Safety in laboratoriesMechanical aspects AS 2243.71991 Safety in laboratoriesElectrical aspects AS/NZS 2243.8:2006 Safety in laboratoriesFume cupboards
287
SUBJECT INDEX
AS 21672005 Graduated straight pipettes AS 22342002 Laboratory glasswareBeakers AS/NZS 2243.2:2006 Safety in laboratoriesChemical aspects AS 2243.41998 Safety in laboratoriesIonizing radiations AS/NZS 2243.5:2004 Safety in laboratoriesNon-ionizing radiationsElectromagnetic, sound and ultrasound AS 2243.61990 Safety in laboratoriesMechanical aspects AS 2243.71991 Safety in laboratoriesElectrical aspects AS/NZS 2243.8:2006 Safety in laboratoriesFume cupboards AS/NZS 2243.9:2003 Safety in laboratoriesRecirculating fume cabinets AS/NZS 2243.10:2004 Safety in laboratoriesStorage of chemicals AS 22441999 Laboratory glasswareTest tubes AS/NZS 22451999 Laboratory glasswareFilter funnels AS 22461996 Conical flasks and boiling flasks (narrow necked) AS 23781996 Density bottles AS 24052005 Laboratory glasswareKjeldahl flasks AS 24062006 Laboratory glasswareGlass condensers with interchangeable ground glass joints AS 24072005 Laboratory glasswareSeparating funnels and dropping funnels AS 24081996 Laboratory glasswareFilter flasks AS 24092005 Laboratory glasswareInterchangeable conical ground glass joints AS 24102005 Laboratory glasswareInterchangeable spherical ground glass joints AS 27661997 Petri dishesPlasticFor single use AS 27702005 Measuring cylindersPlasticsGraduated AS 29372005 Laboratory glasswareStraight-bore glass stopcocks for general purposes AS 38122005 Laboratory glasswareBoiling flasks with interchangeable conical ground glass joints AS 41861994 Screwcap bottles for microbiological use (McCartney bottles) AS 43331995 Dean and Stark apparatus AS 47152002 Laboratory glasswareNarrow-necked boiling flasks AS 4716.12002 Laboratory glasswareBottlesScrew-neck bottles Physicochemical methods of analysis AS 2134.11999 Recommended practice for chemical analysis by atomic absorption spectrometryFlame atomic absorption spectrometry AS 2134.21999 Recommended practice for chemical analysis by atomic absorption spectrometryGraphite furnace spectrometry AS 2134.31994 Recommended practice for chemical analysis by atomic absorption spectrometryVapour generation atomic absorption spectrometry AS 25631996 Wavelength dispersive X-ray fluorescence spectrometersDetermination of precision AS 3641.11999 Recommended practice for atomic emission spectrometric analysisPrinciples and techniques AS 3641.21999 Recommended practice for atomic emission spectrometric analysisInductively coupled plasma excitation AS 36851998 Recommended procedures and principles of glow discharge mass spectrometry (GD-MS) AS 37411990 Recommended practice for chemical analysis by ion chromatography AS 37532001 Recommended practice for chemical analysis by ultraviolet/visible spectrophotometry AS 4873.12005 Recommended practice for inductively coupled plasma-mass spectrometry (ICP-MS)Principles and techniques AS ISO 193192006 Surface chemical analysisAugur electron spectroscopy and X-ray photoelectron spectroscopy Determination of lateral resolution, analysis area and sample area viewed by the analyser ANIMAL FEEDING STUFFS AS 48412006 Hygienic production of pet meat APPLICATIONS see TELECOMMUNICATION SERVICES. APPLICATIONS APPLICATIONS OF INFORMATION TECHNOLOGY Application of information technology in general AS 50372005 Knowledge managementa guide AS 10303.121999 Industrial automation systems and integration Product data representation and exchangeDescription methods: The EXPRESS-I language reference manual
AS/NZS 2243.9:2003 Safety in laboratoriesRecirculating fume cabinets AS/NZS 2243.10:2004 Safety in laboratoriesStorage of chemicals AS 23711994 AlcoholometersGlass AS 2830.11985 Good laboratory practiceChemical analysis AS/NZS 2982.1:1997 Laboratory design and constructionGeneral requirements AS 41851994 PolarimetersSugarAutomatic Chemical reagents AS 3536.11998 Reference gasesPreparation and certification of gravimetric Standards AS 3536.21998 Reference gasesPreparation, analysis and certification of traceable reference gas mixtures AS 38701991 Certified reference materialsGeneral guide to material selection, preparation, testing and certification ASCRM 002-11997 Certified reference materialFloat glassFor use in determining abradability index by AS 1774.23.1 ASCRM 002-21999 Certified reference materialFloat glassFor use in determining abradability index by AS 1774.23.2 ASCRM 003-21993 Certified reference electrode carbonSample 2 ASCRM 0071985 Certified reference iron ore (Dampier Lump) ASCRM 0081985 Certified reference zircon sand concentrate ASRM 010-22006 Standard reference materialCoal ash ASCRM 012A-22002 Certified reference materialCoal sample with total sulfur of 0.33% ASCRM 012D-21998 Certified reference materialCoal sample having total sulfur of 5.21% ASCRM 0141999 Certified reference materialCoke ASRM 0152005 Reference materialCoalRelative density HB 19.301991 Reference materialsGuide 30Terms and definitions used in connection with reference materials HB 19.311991 Reference materialsGuide 31Contents of certificates of reference materials HB 19.331991 Reference materialsGuide 33Uses of certified reference materials HB 19.351991 Reference materialsGuide 35Certification of reference materialsGeneral and statistical principles TR 2.2-11997 Certified reference materialsFloat glass (for use in determination of abradability index by AS 1774.23.1) Preparation and certification of ASCRM 002-1 TR 2.2-21999 Certified reference materialsFloat glass (for use in determination of abradability index by AS 1774.23.2) Preparation and certification of ASCRM 002-2 TR 2.3-21993 Certified reference materialsElectrode carbon Preparation and certification of ASCRM 003-2 (for use in GrayKing coke type test (AS 1038.12.2)) TR 2.71985 Certified reference materialsIron orePreparation and certification of ASCRM 007 (Dampier Lump) TR 2.81985 Certified reference materialsZircon sand concentratePreparation and certification of ASCRM 008 TR 2.10-22006 Reference materialsCoal ashPreparation of ASRM 010-2 TR 2.11-112008 Certified reference materialsCoalPreparation and certification of ASCRM 011-11 (Hardgrove grindability index) TR 2.12A-22002 Certified reference materialsCoalPreparation and certification of ASCRM 012A-2 TR 2.12C-32008 Certified reference materialsCoalPreparation and certification of ASCRM 012C-3 TR 2.12D-21998 Certified reference materialsCoalPreparation and certification of ASCRM 012D-2 TR 2.141999 Certified reference materialsCokePreparation and certification of ASCRM 014 Laboratory equipment see Chemical laboratories. Laboratory equipment Laboratory ware and related apparatus AS 2162.11996 Verification and use of volumetric apparatus GeneralVolumetric glassware AS 2162.21998 Verification and use of volumetric apparatus Guide to the use of piston-operated volumetric apparatus (POVA) AS 21632002 Laboratory glasswareMeasuring cylinders AS 21642003 Laboratory glasswareOne-mark volumetric flasks AS 21651996 Laboratory glasswareBurettes AS 21662002 Laboratory glasswareOne-mark pipettes
288
SUBJECT INDEX
HB 1892004 Knowledge Management Terminology and ReadingsAn Australian Guide Computer-aided design (CAD) AS 3643.11989 Computer graphicsInitial graphics exchange specification (IGES) for digital exchange of product definition dataGeneral AS 3643.21992 Computer graphicsInitial graphics exchange specification (IGES) for digital exchange of product definition dataSubset of AS 3643.1Two-dimensional drawings for architectural, engineering and construction (AEC) industries AS 38831991 Computer graphicsComputer Aided Design (CAD)Guide for structuring of computer graphic information AS 13567.11999 Technical product documentationOrganization and naming of layers for CADOverview and principles AS 13567.21999 Technical product documentationOrganization and naming of layers for CADConcepts, format and codes used in construction documentation IT applications in banking AS 2805.11997 Electronic funds transferRequirements for interfacesCommunications AS 2805.22007 Electronic funds transfersRequirements for interfacesMessage structures, format and content AS 2805.3.12008 Electronic funds transferRequirements for interfacesPIN management and securityGeneral AS 2805.3.22008 Electronic funds transferRequirements for interfacesPIN management and securityOffline AS 2805.4.12001 Electronic funds transferRequirements for interfacesMessage authenticationMechanisms using a block cipher AS 2805.4.22006 Electronic funds transferRequirements for interfacesMessage authenticationMechanisms using a hashfunction AS 2805.4.22001 Electronic funds transferRequirements for interfacesMessage authenticationMechanisms using a hashfunction AS 2805.5.11992 Electronic funds transferRequirements for interfacesCiphersData encipherment algorithm 1 (DEA 1) AS 2805.5.21992 Electronic funds transferRequirements for interfacesCiphersModes of operation for an n-bit block cipher algorithm AS 2805.5.32004 Electronic funds transferRequirements for interfacesCiphersData encipherment algorithm 2 (DEA 2) AS 2805.5.42000 Electronic funds transferRequirements for interfacesCiphersData encipherment algorithm 3 (DEA 3) and related techniques AS 2805.6.12002 Electronic funds transferRequirements for interfacesKey managementPrinciples AS 2805.6.22002 Electronic funds transferRequirements for interfacesKey managementTransaction keys AS 2805.6.32000 Electronic funds transferRequirements for interfacesKey managementSession keysNode to node AS 2805.6.42006 Electronic funds transferRequirements for interfacesKey managementSession keysTerminal to acquirer AS 2805.6.5.12000 Electronic funds transferRequirements for interfacesKey managementTCU InitializationPrinciples AS 2805.6.5.22000 Electronic funds transferRequirements for interfacesKey managementTCU initializationSymmetric AS 2805.6.5.32004 Electronic funds transferRequirements for interfacesKey managementTCU initializationAsymmetric AS 2805.6.62006 Electronic funds transferRequirements for interfacesKey managementSession keysNode to node with KEK replacement AS 2805.92000 Electronic funds transferRequirements for interfacesPrivacy of communications AS 2805.10.12004 Electronic funds transferRequirements for interfaces- File transfer integrity validation AS 2805.10.22003 Electronic funds transferRequirements for interfaces- Secure file transfer (retail) AS 2805.112000 Electronic funds transferRequirements for interfacesCard parameter table AS 2805.12.12004 Electronic funds transferRequirements for interfacesMessage content AS 2805.12.22008 Electronic funds transferRequirements for interfacesApplication and registration procedures for Institution Identification Codes (IIC) AS 2805.12.32008 Electronic funds transferRequirements for interfacesMaintenance procedures for messages, data elements and code values
AS 2805.13.12000 Electronic funds transferRequirements for interfacesSecure hash functions AS 2805.13.22000 Electronic funds transferRequirements for interfacesSecure hash functionsMD5 AS 2805.13.32000 Electronic funds transferRequirements for interfacesSecure hash functionsSHA-1 AS 2805.14.12000 Electronic funds transferRequirements for interfacesSecure cryptographic devices (retail)Concepts, requirements and evaluation methods AS 2805.14.22003 Electronic funds transferRequirements for interfacesSecure cryptographic devices (retail)Security compliance checklists for devices used in magnetic stripe card systems AS 2805.162008 Electronic funds transferRequirements for interfacesMerchant category codes AS 28112003 Personal emergency medical information devices AS 37691990 Automatic teller machinesUser access AS/NZS ISO/IEC 9798.3:2008 Information technologySecurity techniquesEntity authenticationMechanisms using digital signature techniques AS/NZS ISO/IEC 9798.6:2006 Information technologySecurity techniquesEntity authenticationMechanisms using manual data transfer AS/NZS ISO/IEC 15443.1:2006 Information technologySecurity techniquesA framework for IT security assuranceOverview and framework AS/NZS ISO/IEC 18028.2:2006 Information technologySecurity techniquesIT network securityNetwork security architecture AS/NZS ISO/IEC 18028.3:2006 Information technologySecurity techniquesIT network securitySecuring communications between networks using security gateways HB 1271999 Electronic funds transferImplementing message content StandardsConversion Handbook (changing from AS 2805.2 to the AS 2805.12 series) HB 1281999 Electronic funds transferImplementing message content StandardsTerminal Handbook HB 1291999 Electronic funds transferImplementing message content StandardsInterchange Handbook IT applications in health care technology AS/NZS 3200.2.44:2005 Medical electrical equipmentParticular requirements for safetyX-ray equipment for computed tomography AS/NZS 3200.2.44:2000 Medical electrical equipmentParticular requirements for safetyX-ray equipment for computed tomography AS 4700.12006 Implementation of Health Level Seven (HL7) Version 2.5Patient administration AS 4700.12005 Implementation of Health Level Seven (HL7) Version 2.4Patient administration AS 4700.12001 Implementation of Health Level Seven (HL7) Version 2.3.1.Patient administration AS 4700.11998 Implementation of Health Level Seven (HL7) Version 2.3Patient administration AS 4700.11997 Implementation of Health Level Seven (HL7) Version 2.2Admission, discharge and transfer AS 4700.22007 Implementation of Health Level Seven (HL7) Version 2.4Pathology and medical imaging (diagnostics) AS 4700.22004 Implementation of Health Level Seven (HL7) Version 2.3.1Pathology orders and results AS 4700.21998 Implementation of Health Level Seven (HL7) Version 2.3Pathology orders and results AS 4700.3(Int)2007 Implementation of Health Level Seven (HL7) Version 2.5Electronic messages for exchange of information on drug prescription AS 4700.32005 Implementation of Health Level Seven (HL7) Version 2.4Electronic messages for exchange of information on drug prescription AS/NZS 4700.3:2002 Implementation of Health Level Seven (HL7) Version 2.3.1Electronic messages for exchange of information on drug prescription AS/NZS 4700.3:1999 Implementation of Health Level Seven (HL7) Version 2.3Electronic messages for exchange of information on drug prescription AS 4700.5(Int)2007 Implementation of Health Level Seven (HL7) Version 2.5Immunization messages AS 4700.52005 Implementation of Health Level Seven (HL7) Version 2.4Immunization messages
289
SUBJECT INDEX
IT applications in industry AS 10303.11998 Industrial automation systems and integration Product data representation and exchangeOverview and fundamental principles AS 10303.111998 Industrial automation systems and integration Product data representation and exchangeDescription methods: The EXPRESS language reference manual AS 10303.211998 Industrial automation systems and integration Product data representation and exchangeImplementation methods: Clear text encoding of the exchange structure AS 10303.222000 Industrial automation systems and integration Product data representation and exchangeImplementation methods: Standard data access interface AS 10303.311998 Industrial automation systems and integration Product data representation and exchangeConformance testing methodology and framework: General concepts AS 10303.411998 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Fundamentals of product description and support AS 10303.421998 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Geometric and topological representation AS 10303.431998 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Representation structures AS 10303.441998 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Product structure configuration AS 10303.452000 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Materials AS 10303.461998 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Visual presentation AS 10303.471999 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resource: Shape variation tolerances AS 10303.492000 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Process structure and properties AS 10303.1011998 Industrial automation systems and integrationProduct data representation and exchangeIntegrated application resources: Draughting AS ISO 10303.1042004 Industrial automation systems and integrationProduct data representation and exchangeIntegrated application resource: Finite element analysis AS 10303.1051999 Industrial automation systems and integrationProduct data representation and exchangeIntegrated application resource: Kinematics AS 10303.2011998 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Explicit draughting AS 10303.2021999 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Associative draughting AS 10303.2031998 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Configuration controlled design AS ISO 10303.2042004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Mechanical design using boundary representation (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) AS 10303.2072000 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Sheet metal die planning and design AS ISO 10303.2092004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Composite and metallic structural analysis and related design (ONLY AVAILABLE ON AS ISO 103032004 (CDROM)) AS ISO 10303.2102004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Electronic assembly, interconnection, and packaging design (ONLY AVAILABLE ON AS ISO 103032004 (CDROM)) AS ISO 10303.2122004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Electrotechnical design and installation (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM))
AS 4700.52002 Implementation of Health Level Seven (HL7) Version 2.3.1Immunization Messages AS 4700.6(Int)2007 Implementation of Health Level Seven (HL7) Version 2.5Referral, discharge and health record messaging AS 4700.62006 Implementation of Health Level Seven (HL7) Version 2.4Referral, discharge and health record messaging AS 4700.62004 Implementation of Health Level Seven (HL7) Version 2.3.1Referral and discharge summary AS 4700.72005 Implementation of Health Level Seven (HL7) Version 2.3.1Diagnostic imaging orders and results AS 47052003 Guide to implementation of an electronic medical claim message for simplified billing in Australia AS 48462006 Health Care Provider Identification AS 48462004 Health care provider identification AS 50172006 Health Care Client Identification AS 50172002 Health Care Client Identification AS 50212005 The language of health concept representation AS 5023 Set2006 Health supply chain messaging Set AS 5023.12003 Health supply chain messagingMessaging rules and process logic AS 5023.22003 Health supply chain messagingDatasets AS 5023.32004 Health supply chain messagingMessaging rules and process logicSecondary transactions AS 5023.42004 Health supply chain messagingDataset content Secondary transactions AS 5023.52005 Health supply chain messagingMessaging rules and process logicTurnover order, turnover order status, rebate claim, rebate claim response AS 5023.62005 Health supply chain messagingDataset content Turnover order status, rebate claim, rebate claim response ATS 50382006 Health supply chain messagingEvaluated receipts settlement AS ISO 152252003 NomenclatureSpecification for a nomenclature system for medical devices for the purpose of regulatory data exchange AS ISO 17090.12003 Health informaticsPublic key infrastructure Framework and overview AS ISO 17090.22003 Health informaticsPublic key infrastructure Certificate profile AS ISO 17090.32003 Health informaticsPublic key infrastructure Policy management of certification authority AS ISO 183082005 Health InformaticsRequirements for an electronic health record architecture (ISO/TS 18308:2004, MOD) HB 172.12006 Message Usage ModelHistory and conceptual framework HB 172.22006 Message Usage ModelCurrent Standards HB 2222006 Australian Health Care Client and Provider Identification Handbook HB 2352007 Implementers guideline for HL7 referral, discharge and health record messaging HB 2622008 Guidelines for pathology messaging between pathology providers and health service providers HB 2912007 Health informaticsGuide to data development in health HB 3032007 Guide to the use of abbreviations, acronyms and local terms in health care HB 3042007 Guide to Australian electronic communication in health care HB 3072007 Guide to the principles and desirable features of clinical decision support systems MP 942003 Product numbering standards for electronic health supply chains MP 962008 Standards for enterprise-wide patient administration systems MP 972008 Standards for enterprise-wide clinical information systems TR 29612007 Telehealth standards scoping study TR 29652007 Harmonisation of HD and EI data types across AS 4700.X Standards and associated Handbooks TR 29662007 Standardization of Hierarchic Designators in HL7 messaging TR 48902008 HL7 messaging requirements for scheduling, bed availability, consent and eligibility
290
SUBJECT INDEX
AS ISO 10303.2142004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Core data for automotive mechanical design processes (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) AS ISO 10303.2162004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Ship moulded forms (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) AS ISO 10303.2242004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Mechanical product definition for process planning using machining features (ONLY AVAILABLE ON AS ISO 10303 2004 (CD-ROM)) AS ISO 10303.2252004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Building elements using explicit shape representation (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) AS ISO 10303.2272004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Plant spatial configuration (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) AS ISO 10303.2322004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Technical data packaging core information and exchange (ONLY AVAILABLE ON AS ISO 103032004 (CDROM)) AS ISO 13584.12004 Industrial automation systems and integrationParts libraryOverview and fundamental principles AS ISO 13584.202004 Industrial automation systems and integrationParts libraryLogical resource: Logical model of expressions AS ISO 13584.242004 Industrial automation systems and integrationParts libraryLogical resource: Logical model of supplier library AS ISO 13584.262004 Industrial automation systems and integrationParts libraryLogical resource: Information supplier identification AS ISO 13584.312004 Industrial automation systems and integrationParts libraryImplementation resources: Geometric programming interface AS ISO 13584.422004 Industrial automation systems and integrationParts libraryDescription methodology: Methodology for structuring part families AS ISO 13584.1012004 Industrial automation systems and integrationParts libraryGeometrical view exchange protocol by parametric program AS ISO 14649.12004 Industrial automation systems and integrationPhysical device controlData model for computerized numerical controllersOverview and fundamental principles AS ISO 14649.102004 Industrial automation systems and integrationPhysical device controlData model for computerized numerical controllersGeneral process data AS ISO 14649.112004 Industrial automation systems and integrationPhysical device controlData model for computerized numerical controllersProcess data for milling AS ISO 18876.12004 Industrial automation systems and integrationIntegration of industrial data for exchange, access and sharingArchitecture overview and description AS ISO 18876.22004 Industrial automation systems and integrationIntegration of industrial data for exchange, access and sharingIntegration and mapping methodology AS IEC 61131.12004 Programmable controllersGeneral information AS IEC 61131.22004 Programmable controllersEquipment requirements and tests AS IEC 61131.32004 Programmable controllersProgramming languages AS IEC 61131.42004 Programmable controllersUser guidelines AS IEC 61131.52004 Programmable controllersCommunications AS IEC 61131.72004 Programmable controllersFuzzy control programming AS IEC 61131.82004 Programmable controllersGuidelines for the application and implementation of programming languages IT applications in information, documentation and publishing AS/NZS 2619:1998 Information and documentationFormat for information exchange AS 35141987 Information processingText and office systems Standard generalized markup language (SGML)
AS 36491990 Information processingSGML support facilities SGML document interchange format (SDIF) AS 38781991 Information processingComputer-assisted publishingVocabulary AS 3967.11991 Information processingSGML support facilities Techniques for using SGMLSGML Tutorial AS/NZS 3967.11:1994 Information processingSGML support facilitiesTechniques for using SGMLApplication at ISO Central Secretariat for international Standards and technical reports AS/NZS 3967.13:1994 Information processingSGML support facilitiesTechniques for using SGMLPublic entity sets for mathematics and science AS 3976.11991 Information processingPortable Operating System Interface (POSIX)System Application Program Interface (API) C Language AS/NZS 4097:1993 Information technologySGML support facilitiesRegistration procedures for public text owner identifiers AS/NZS 4110:1993 Information technologySGML and text-entry systemsGuidelines for SGML syntax-directed editing systems AS/NZS 4148:1994 Information technologyHypermedia/Timebased structuring language (HyTime) AS/NZS 4159.1:1994 Information technologyFont information interchangeArchitecture AS/NZS 4159.2:1994 Information technologyFont information interchangeInterchange format AS/NZS 4196:1999 Information and documentationOpen Systems InterconnectionInterlibrary loan application service definition AS/NZS 4197.1:1999 Information and documentationOpen Systems InterconnectionInterlibrary loan application protocol specificationProtocol specification AS/NZS 4197.2:1999 Information and documentationOpen Systems InterconnectionInterlibrary loan application protocol specificationProtocol implementation conformance statement (PICS) proforma AS/NZS 4449:1997 Information and documentationElectronic manuscript preparation and markup AS/NZS 4450.1:1997 Information and documentationBibliographic data element directoryInterloan applications AS/NZS 4450.2:1997 Information and documentationBibliographic data element directoryAcquisitions applications AS/NZS 4450.3:1997 Information and documentationBibliographic data element directoryInformation retrieval applications AS/NZS 4450.4:2000 Information and documentationBibliographic data element directoryCirculation applications AS/NZS 4450.5:2003 Information and documentationBibliographic data element directoryData elements for the exchange of cataloguing and metadata AS 5044.12002 AGLS Metadata element setReference description AS 5044.22002 AGLS Metadata element setUsage guide AS ISO 86012007 Data elements and interchange formats Information interchangeRepresentation of dates and times AS 101791998 Information technologyProcessing languages Document style semantics and specification language AS/NZS ISO 10957:2004 Information and documentation International standard music number (ISMN) AS/NZS ISO 15511:2004 Information and documentation International Standard Identifier for Libraries and Related Organizations (ISIL) AS/NZS ISO 15706:2004 Information and documentation International Standard Audiovisual Number (ISAN) AS/NZS ISO 15707:2004 Information and documentation International Standard Music Work Code (ISWC) AS/NZS ISO 15836:2004 Information and documentationThe Dublin Core metadata element set AS/NZS ISO 17933:2004 Generic electronic document interchange AS ISO 19005.12006 Document managementElectronic document file format for long-term preservationUse of PDF 1.4 (PDF/A-1) AS ISO 23081.12006 Information and documentationRecords management processesMetadata for recordsPrinciples AS/NZS ISO 23081.2:2007 Information and documentation Records management processesMetadata for records Conceptual and implementation issues AS/NZS 23950:1999 Information and documentationInformation retrieval (Z30.50)Application service definition and protocol specification
291
SUBJECT INDEX
AS/NZS 4819:2003 Geographic informationRural and urban addressing AS ISO 149752006 Surface chemical analysisInformation formats AS/NZS ISO 19101:2003 Geographic informationReference model AS/NZS ISO 19103:2006 Geographic informationConceptual schema language AS/NZS ISO 19105:2002 Geographic informationConformance and testing AS/NZS ISO 19106:2005 Geographic informationProfiles AS/NZS ISO 19107:2005 Geographic informationSpatial schema AS/NZS ISO 19108:2003 Geographic informationTemporal schema AS/NZS ISO 19109:2006 Geographic informationRules for application schema AS/NZS ISO 19110:2006 Geographic informationMethodology for feature cataloguing AS/NZS ISO 19111:2008 Geographic informationSpatial referencing by coordinates AS/NZS ISO 19112:2005 Geographic informationSpatial referencing by geographic identifiers AS/NZS ISO 19113:2004 Geographic informationQuality principles AS/NZS ISO 19114:2005 Geographic informationQuality evaluation procedures AS/NZS ISO 19115:2005 Geographic informationMetadata AS/NZS ISO 19116:2005 Geographic informationPositioning services AS/NZS ISO 19117:2006 Geographic informationPortrayal AS/NZS ISO 19118:2006 Geographic informationEncoding AS/NZS ISO 19119:2006 Geographic informationServices AS/NZS ISO 19120:2006 Geographic informationFunctional standards AS/NZS ISO 19121:2006 Geographic informationImagery and gridded data AS/NZS ISO 19122:2006 Geographic information/Geomatics Qualification and certification of personnel AS/NZS ISO 19123:2006 Geographic informationSchema for coverage geometry and functions AS/NZS ISO 19125.1:2004 Geographic informationSimple feature accessCommon architecture AS/NZS ISO 19125.2:2004 Geographic informationSimple feature accessSQL option AS/NZS ISO 19127:2006 Geographic informationGeodetic codes and parameters AS/NZS ISO 19128:2006 Geographic informationWeb map server interface AS/NZS ISO 19131:2008 Geographic informationData product specifications AS/NZS ISO 19133:2006 Geographic informationLocation-based servicesTracking and navigation AS/NZS ISO 19134:2008 Geographic informationLocation-based servicesMultimodal routing and navigation AS/NZS ISO 19135:2006 Geographic informationProcedures for item registration AS/NZS ISO 19136:2008 Geographic informationGeography Markup Language (GML) AS/NZS ISO 19137:2008 Geographic informationCore profile of the spatial schema AS/NZS ISO 19138:2008 Geographic informationData quality measures AS/NZS ISO 19139:2008 Geographic informationMetadataXML schema implementation HB 255:2002 ISO/TR 19121 Geographic informationImagery and gridded data IT applications in transport and trade AS/NZS 3801:1995 Electronic data interchange for administration, commerce and transport (EDIFACT)Application level syntax rules AS 38051991 Electronic data interchange for administration, commerce and transport (EDIFACT)Forms designBasic layout AS 4539.1.12002 Information technologyPublic Key Authentication Framework (PKAF) related StandardsGeneralPKAF architecture
HB 256:2007 Metadata usage in Australian and New Zealand education and training IT applications in office work AS 3893.11991 Information processing systemsText communicationRemote OperationsModel, notation and service definition AS 3893.21991 Information processing systemsText communicationRemote OperationsProtocol specification AS 4016.11992 Information processing systemsText communicationReliable transferModel and service definition AS 4016.21992 Information processing systemsText communicationReliable transferProtocol specification AS/NZS 4033.2:1999 Information technologyText communication Message-oriented text interchange systemsOverall architecture AS/NZS 4033.4:1999 Information technologyText communication Message-oriented text interchange systemsMessage transfer systemAbstract service definition and procedures AS/NZS 4033.5 Supplement 1:1999 Information technologyText communicationMessage-oriented text interchange systems Message storeAbstract service definitionAdditional correlation attribute and security error code (Supplement to AS 4033.5 1998) AS/NZS 4033.6:1999 Information technologyText communication Message-oriented text interchange systemsProtocol specifications AS/NZS 4033.7:1999 Information technologyText communication Message-oriented text interchange systemsInterpersonal messaging system AS/NZS 4033.10:1999 Information technologyText communicationMessage-oriented text interchange systemsMHS routing AS/NZS 4167.1:1994 Information technologyText and office systemsDocument filing and retrievalAbstract service definition and procedures AS/NZS 4167.2:1994 Information technologyText and office systemsDocument filing and retrievalProtocol specification AS/NZS 4225.1:1994 Information technologyText and office systemsOffice document architecture and interchange format Technical report on AS 3951 (ISO 8613) implementation testingTesting methodology AS/NZS 4277:1995 Text telecommunicationsUser interface requirementsFor Deaf people and people with hearing and speech disabilities IT applications in other fields AS 41401995 Metering and utility information exchangeGlossary of terms AS 4141.11995 Customer/utility information exchangeSystem architecture and functionality AS 4141.21995 Customer/utility information exchange Applications and performance AS 4141.31995 Customer/utility information exchangeCustomer premises interfaces AS 4700.11998 Implementation of Health Level Seven (HL7) Version 2.3Patient administration AS 50182001 Electronic animal identificationNational coding scheme (ISO 11784:1996, MOD) AS 50192001 Electronic animal identificationRadiofrequency methods HB 2352007 Implementers guideline for HL7 referral, discharge and health record messaging TR 29652007 Harmonisation of HD and EI data types across AS 4700.X Standards and associated Handbooks TR 29662007 Standardization of Hierarchic Designators in HL7 messaging TR 48902008 HL7 messaging requirements for scheduling, bed availability, consent and eligibility IT applications in science AS 24821989 Geographic information systemsGeographic data Interchange of feature-coded digital mapping data AS 37361990 Geographical information systemsBibliographical elements on maps AS/NZS 4270.1:1995 Geographic information systemsSpatial data transfer standardLogical specifications AS/NZS 4270.2:1995 Geographic information systemsSpatial data transfer standardSpatial features AS/NZS 4270.3:1995 Geographic information systemsSpatial data transfer standardISO 8211 encoding AS/NZS 4270.4:1998 Geographic information systemsSpatial data transfer standardTopological vector profile
292
SUBJECT INDEX
AS 4539.1.2.12001 Information technologyPublic Key Authentication Framework (PKAF)GeneralX.509 Certificate and Certificate Revocation Lists (CRL) profile AS 4539.1.2.22001 Information technologyPublic Key Authentication Framework (PKAF)GeneralPICS Proforma for digital signature certificates AS 4539.1.2.32001 Information technologyPublic Key Authentication Framework (PKAF) related StandardsGeneralPICS Proforma for Certificate Revocation Lists (CRL) AS 4539.1.31999 Information technologyPublic Key Authentication Framework (PKAF)GeneralX.509 supported algorithms profile AS 4539.2.12000 Information technologyPublic Key Authentication Framework (PKAF)Assurance frameworkCertification authorities AS 47212000 Personal privacy practices for the electronic tolling industry AS 49622005 Electronic toll collectionTransaction specification for Australian interoperability on the DSRC link AS ISO 9735.12003 Electronic data interchange for administration, commerce and transport (EDIFACT)Application level syntax rules (Syntax version number: 4, Syntax release number: 1) Syntax rules common to all parts AS ISO 9735.22003 Electronic data interchange for administration, commerce and transport (EDIFACT)Application level syntax rules (Syntax version number: 4, Syntax release number: 1) Syntax rules specific to batch EDI AS ISO 9735.32003 Electronic data interchange for administration, commerce and transport (EDIFACT)Application level syntax rules (Syntax version number: 4, Syntax release number: 1) Syntax rules specific to interactive EDI AS ISO 9735.42003 Electronic data interchange for administration, commerce and transport (EDIFACT)Application level syntax rules (Syntax version number: 4, Syntax release number: 1) Syntax and service report message for batch EDImessage typeCONTRL AS ISO 9735.52003 Electronic data interchange for administration, commerce and transport (EDIFACT)Application level syntax rules (Syntax version number: 4, Syntax release number: 1) Security rules for batch EDIauthenticity, integrity and nonrepudiation of origin AS ISO 9735.62003 Electronic data interchange for administration, commerce and transport (EDIFACT)Application level syntax rules (Syntax version number: 4, Syntax release number: 1) Secure authentication and acknowledgement message message typeAUTACK AS ISO 9735.72003 Electronic data interchange for administration, commerce and transport (EDIFACT)Application level syntax rules (Syntax version number: 4, Syntax release number: 1) Security rules for batch EDIconfidentiality AS ISO 9735.82003 Electronic data interchange for administration, commerce and transport (EDIFACT)Application level syntax rules (Syntax version number: 4, Syntax release number: 1) Associated data in EDI AS ISO 9735.92003 Electronic data interchange for administration, commerce and transport (EDIFACT)Application level syntax rules (Syntax version number: 4, Syntax release number: 1) Security key and certificate management messagemessage typeKEYMAN AS ISO 9735.102003 Electronic data interchange for administration, commerce and transport (EDIFACT)Application level syntax rules (Syntax version number: 4, Syntax release number: 1)Syntax service directories AS ISO/IEC 146622005 Information technologyOpen-edi reference model AS ISO 148172004 Transport information and control systems Requirements for an ITS/TICS central Data Registry and ITS/TICS Data Dictionaries AS ISO 149062005 Road transport and traffic telematics Electronic fee collectionApplication interface definition for dedicated short-range communication AS ISO/IEC 15944.12005 Information technologyBusiness agreement semantic descriptive techniquesBusiness operational aspects of Open-edi for implementation AS ISO/IEC 18000.12007 Information technologyRadio frequency identification for item managementReference architecture and definition of parameters to be standardized AS ISO/IEC 18000.22007 Information technologyRadio frequency identification for item managementParameters for air interface communications below 135 kHz
AS ISO/IEC 18000.32007 Information technologyRadio frequency identification for item managementParameters for air interface communications at 13.56 MHz AS ISO/IEC 18000.42007 Information technologyRadio frequency identification for item managementParameters for air interface communications at 2.45 GHz AS ISO/IEC 18000.62007 Information technologyRadio frequency identification for item managementParameters for air interface communications at 860 MHz to 960 MHz AS ISO/IEC 18000.72007 Information technologyRadio frequency identification for item managementParameters for active air interface communications at 433 MHz AS ISO/IEC 180462007 Information technologyAutomatic identification and data capture techniquesRadio frequency identification device performance test methods HB 74:1996 X.400 Security Implementation Guide HB 3102006 BizDexA framework for registry operations HB 3112006 B2B registry serviceDetailed specification HB 3122006 B2B registry serviceProduct business requirements HB 3132006 National registry and toolkit projectFinal project outcomes report HB 3142006 BizDexA national framework HB 3152007 BizDexA national frameworkROI calculator user guide HB 3172006 Grain ticket delivery receipt POC public process implementation guidelines HB 3182006 B2B integration toolkitBusiness requirements HB 3192006 BizLinkThe B2B integration toolkit technical specification MP 751996 Strategies for the implementation of a Public Key Authentication Framework (PKAF) in Australia Identification cards and related devices AS 3522.62002 Identification cardsRecording technique Magnetic stripeHigh coercivity AS 3523.12008 Identification cardsIdentification of issuers Numbering system AS 3523.22008 Identification cardsIdentification of issuers Application and registration procedures AS 3523.32000 Identification cardsIdentification of issuers Australian national numbering system and registration procedures AS 35242008 Identification cardsFinancial transaction cards AS 35252008 Financial transaction cardsMagnetic stripe data content for track 3 AS 47182000 Machine readable identity cards AS 49542001 Identification cardsIntegrated circuit(s) cards with contactsNumbering system and registration procedure for application identifiers AS/NZS ISO/IEC 9798.3:2008 Information technologySecurity techniquesEntity authenticationMechanisms using digital signature techniques AS 14443.12003 Identification cardsContactless integrated circuit(s) cardsProximity cardsPhysical characteristics AS 14443.22003 Identification cardsContactless integrated circuit(s) cardsProximity cardsRadio frequency power and signal interface AS 14443.32003 Identification cardsContactless integrated circuit(s) cardsProximity cardsInitialization and anticollision AS 14443.42003 Identification cardsContactless integrated circuit(s) cardsProximity cardsTransmission protocol AS 15693.12003 Identification cardsContactless integrated circuit(s) cardsVicinity cardsPhysical characteristics AS 15693.22003 Identification cardsContactless integrated circuit(s) cardsVicinity cardsAir interface and initialization AS 15693.32003 Identification cardsContactless integrated circuit(s) cardsVicinity cardsAnticollision and transmission protocol ASTRONOMY. GEODESY. GEOGRAPHY AS/NZS ISO 6709:2008 Standard representation of latitude, longitude and altitude for geographic point locations AS/NZS ISO 19101:2003 Geographic informationReference model AS/NZS ISO 19105:2002 Geographic informationConformance and testing AS/NZS ISO 19108:2003 Geographic informationTemporal schema AS/NZS ISO 19111:2008 Geographic informationSpatial referencing by coordinates AS/NZS ISO 19113:2004 Geographic informationQuality principles
293
SUBJECT INDEX
Radio receivers AS 2909.41986 Methods of measurement on radio receivers for various classes of emissionRadio-frequency measurements on receivers for frequency-modulated sound-broadcasting emissions AS/NZS 4053:1997 Limits and methods of measurement of immunity characteristics of sound and television broadcast receivers and associated equipment AS/NZS 4448:1997 Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles Television receivers AS/NZS CISPR 20:2006 Sound and television broadcast receivers and associated equipmentImmunity characteristicsLimits and methods of measurement AS 1173.11979 Recommended methods of measurement on receivers for television broadcast transmissionsGeneral considerationsElectrical measurements other than those at audiofrequencies AS 1173.21986 Recommended methods of measurement on receivers for television broadcast transmissionsElectrical and acoustic measurements at audio-frequencies AS 28391988 Colour television receiversGeneral requirements and selected performance parametersLimits and methods of measurement AS/NZS 4053:1997 Limits and methods of measurement of immunity characteristics of sound and television broadcast receivers and associated equipment AS 4542.11999 Consumer television interfacesPAL RF AS 4542.22001 Consumer television interfacesAnalogue baseband AS 4933.12005 Digital televisionRequirements for receivers VHF/UHF DVB-T television broadcasts Video systems AS 39711991 Television camerasParallel component video interface for non-composite ENG signals AS 4806 Set2008 CCTV Set AS 4806.12006 Closed circuit television (CCTV)Management and operation AS 4806.22006 Closed circuit television (CCTV)Application guidelines AS 4806.32006 Closed circuit television (CCTV)PAL signal timings and levels AS 4806.42008 Closed circuit television (CCTV)Remote video MP 74:1996 Strategies for the development of Standards for digital video and associated services AUTOMATIC CONTROLS FOR HOUSEHOLD USE AS/NZS 3161:2005 Approval and test specificationThermostats and energy regulators AS/NZS 3197:2005 Approval and test specificationPortable electrical control or conditioning devices BAGS see SACKS. BAGS BANKING see FINANCES. BANKING. MONETARY SYSTEMS. INSURANCE BARRELS. DRUMS. CANISTERS AS 27671994 Rigid plastic containers AS 29052005 Steel drums AS/NZS 2906:2001 Fuel containersPortable-plastic and metal AS 39831991 Metal drums for insulated electric cables and bare conductors BEARINGS Rolling bearings AS 27291994 Rolling bearingsDynamic load ratings and rating life AS 38901991 Rolling bearingsSystem life and reliability AS 41711994 Rolling bearingsStatic load ratings AS 41721994 Rolling bearingsVocabulary BEVERAGES Alcoholic beverages AS 29712007 Serially produced pressure vessels AS 50342005 Installation and use of inert gases for beverage dispensing Beverages in general AS 29712007 Serially produced pressure vessels AS 50342005 Installation and use of inert gases for beverage dispensing
AS/NZS ISO 19120:2006 Geographic informationFunctional standards AS/NZS ISO 19121:2006 Geographic informationImagery and gridded data AS/NZS ISO 19125.1:2004 Geographic informationSimple feature access Common architecture AS/NZS ISO 19125.2:2004 Geographic informationSimple feature access SQL option AS/NZS ISO 19127:2006 Geographic informationGeodetic codes and parameters AS/NZS ISO 19131:2008 Geographic informationData product specifications AS/NZS ISO 19134:2008 Geographic informationLocation-based services Multimodal routing and navigation AS/NZS ISO 19136:2008 Geographic informationGeography Markup Language (GML) AS/NZS ISO 19137:2008 Geographic informationCore profile of the spatial schema AS/NZS ISO 19138:2008 Geographic informationData quality measures AS/NZS ISO 19139:2008 Geographic informationMetadataXML schema implementation HB 255:2002 ISO/TR 19121 Geographic informationImagery and gridded data AUDIO, VIDEO AND AUDIOVISUAL ENGINEERING Audio, video and audiovisual systems in general AS/NZS 1367:2007 Coaxial cable and optical fibre systems for the RF distribution of analog and digital television and sound signals in single and multiple dwelling installations AS/NZS 4249:1994 Electrical safety practicesFilm, video and television sites AS/NZS 60065:2003 Audio.video and similar electronic apparatus Safety requirements (IEC 60065:2001, MOD) AS/NZS 62087:2004 Methods of measurement for the power consumption of audio, video and related equipment AS/NZS 62087.2.1:2008 Power consumption of audio, video and related equipmentMinimum energy performance standards (MEPS) requirements for digital television set-top boxes Multimedia systems and teleconferencing equipment AS/NZS 14478.1:2000 Information technologyComputer graphics and image processingPresentation environment for multimedia objectsFundamentals of presentation environment for multimedia objects AS/NZS 14478.2:2000 Information technologyComputer graphics and image processingPresentation environment for multimedia objectsFoundation component AS/NZS 14478.3:2000 Information technologyComputer graphics and image processingPresentation environment for multimedia objectsMultimedia systems services AS/NZS 14478.4:2000 Information technologyComputer graphics and image processingPresentation environment for multimedia objectsModelling, rendering and interaction component AS/NZS 15938.2:2003 Information technologyMultimedia content description interfaceDescription definition language AS ISO/IEC 21000.22006 Information technologyMultimedia framework (MPEG-21)Digital Item Declaration AS ISO/IEC 21000.32004 Information technologyMultimedia framework (MPEG-21)Digital Item Identification AS ISO/IEC 21000.42006 Information technologyMultimedia framework (MPEG-21)Intellectual Property Management and Protection Components AS ISO/IEC 21000.52004 Information technologyMultimedia framework (MPEG-21)Rights Expression Language AS ISO/IEC 21000.72005 Information technologyMultimedia framework (MPEG 21)Digital item adaptation AS ISO/IEC 21000.82006 Information technologyMultimedia framework (MPEG-21)Reference Software AS ISO/IEC 21000.92005 Information technologyMultimedia framework (MPEG-21)File Format AS ISO/IEC 21000.102006 Information technologyMultimedia framework (MPEG-21)Digital Item Processing AS ISO/IEC 21000.162006 Information technologyMultimedia framework (MPEG-21)Binary Format AS ISO/IEC 23001.12006 Information technologyMPEG systems technologiesBinary MPEG format for XML HB 75:1996 Teleconferencing Handbook
294
SUBJECT INDEX
BIRTH CONTROL. MECHANICAL CONTRACEPTIVES AS 18081984 Contraceptive devicesDiaphragms AS/NZS 4592:2005 Latex barrier membranes (dams) for prophylactic use in sexual activity BOBBINS see SPOOLS. BOBBINS BODY CARE EQUIPMENT AS/NZS 2635:2008 Solaria for cosmetic purposes AS/NZS 3130:1995 Approval and test specificationBeauty therapy equipment AS/NZS 3194:1993 Approval and test specificationElectric shaver supply units AS/NZS 3350.2.8:1995 Safety of household and similar electrical appliancesParticular requirementsShavers, hair clippers and similar appliances AS/NZS 3350.2.23:2001 Safety of household and similar electrical appliances- Particular requirements for appliances for skin and hair care (IEC 60335-2-23:1996, MOD) AS/NZS 3350.2.27:1996 Safety of household and similar electrical appliancesParticular requirementsAppliances for skin exposure to ultraviolet and infrared radiation AS/NZS 3350.2.32:2001 Safety of household and similar electrical appliances- Particular requirements for massage appliances (IEC 60335-232:1993, MOD) AS/NZS 3350.2.52:1996 Safety of household and similar electrical appliancesParticular requirementsOral hygiene appliances AS/NZS 3350.2.53:1998 Safety of household and similar electrical appliancesParticular requirementsSauna heating appliances AS/NZS 3350.2.81:1998 Safety of household and similar electrical appliancesParticular requirementsFoot warmers and heating mats AS/NZS 60335.2.8:2004 Household and similar electrical appliances Safety- Particular requirements for shavers, hair clippers and similar appliances AS/NZS 60335.2.23:2004 Household and similar electrical appliances Safety- Particular requirements for appliances for skin or hair care AS/NZS 60335.2.27:2004 Household and similar electrical appliances Safety- Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation AS/NZS 60335.2.32:2004 Household and similar electrical appliances Safety- Particular requirements for massage appliances AS/NZS 60335.2.52:2006 Household and similar electrical appliances SafetyParticular requirements for oral hygiene appliances (IEC 603352-52 Ed 3, IDT) AS/NZS 60335.2.53:2006 Household and Similar Electrical Appliances SafetyParticular requirements for sauna heating appliances AS/NZS 60335.2.81:2006 Household and Similar Electrical Appliances SafetyParticular requirements for foot warmers and heating mats AS/NZS 60335.2.108:2008 Household and similar electrical appliances SafetyParticular requirements for electrolysers (IEC 60335-2-108 Ed 1, MOD) BOILERS see BURNERS. BOILERS BOTTLES. POTS. JARS AS 13821974 Glass milk and cream bottles of the metal foil cap type (200600 mL capacity) AS 22161997 Packaging for poisonous substances AS 27671994 Rigid plastic containers BOXES see CASES. BOXES. CRATES BRIDGE CONSTRUCTION AS 3818.62003 TimberHeavy structural productsVisually graded Decking for wharves and bridges AS 5100 Set2007 Bridge Design Set AS 5100.12004 Bridge designScope and general principles AS 5100.1 Supplement 12006 Bridge designScope and general principlesCommentary (Supplement to AS 5100.12004) AS 5100.22004 Bridge designDesign loads AS 5100.2 Supplement 12007 Bridge designDesign loadsCommentary (Supplement to AS 5100.22004) AS 5100.32004 Bridge designFoundations and soil supporting structures AS 5100.3 Supplement 12008 Bridge designFoundations and soilsupporting structuresCommentary (Supplement to AS 5100.32004) AS 5100.42004 Bridge designBearings and deck joints AS 5100.4 Supplement 12006 Bridge designBearings and deck joints Commentary (Supplement to AS 5100.42004) AS 5100.52004 Bridge designConcrete AS 5100.5 Supplement 12008 Bridge designConcreteCommentary (Supplement to AS 5100.52004) AS 5100.62004 Bridge designSteel and composite construction
AS 5100.6 Supplement 12007 Bridge designSteel and composite constructionCommentary (Supplement to AS 5100.62004) AS 5100.72004 Bridge designRating of existing bridges AS 5100.7 Supplement 12006 Bridge designRating of existing bridges Commentary (Supplement to AS 5100.72004) HB 77.01996 Australian Bridge Design CodeConversion and list of parts HB 77.11996 Australian Bridge Design CodeGeneral HB 77.1 Supplement 11996 Australian Bridge Design CodeGeneral Commentary (Supplement to SAA HB77.11996) HB 77.21996 Australian Bridge Design CodeDesign loads HB 77.2 Supplement 11996 Australian Bridge Design CodeDesign loads Commentary (Supplement to SAA HB77.21996) HB 77.31996 Australian Bridge Design CodeFoundations HB 77.3 Supplement 11996 Australian Bridge Design CodeFoundations Commentary (Supplement to SAA HB77.31996) HB 77.41996 Australian Bridge Design CodeBearings and Deck Joints HB 77.4 Supplement 11996 Australian Bridge Design CodeBearings and Deck JointsCommentary (Supplement to SAA HB77.41996) HB 77.51996 Australian Bridge Design CodeConcrete HB 77.5 Supplement 11996 Australian Bridge Design CodeConcrete Commentary (Supplement to SAA HB77.51996) HB 77.61996 Australian Bridge Design CodeSteel and Composite Construction Code HB 77.6 Supplement 11996 Australian Bridge Design CodeSteel and Composite ConstructionCommentary (Supplement to SAA HB77.6 1996) HB 77.71996 Australian Bridge Design CodeRating Code HB 77.7 Supplement 11996 Australian Bridge Design CodeRating Code Commentary (Supplement to SAA HB77.71996) HB 77.81996 Australian Bridge Design CodeRailway Supplement (Sections 1-5) Code HB 77.8 Supplement 11996 Australian Bridge Design CodeRailway Supplement (Sections 1-5) CodeCommentary (Supplement to SAA HB77.81996) BUILDING ACCESSORIES AS 4145.12008 Locksets and hardware for doors and windowsGlossary of terms and rating system AS 4145.22008 Locksets and hardware for doors and windows Mechanical locksets for doors and windows in buildings AS 4145.32001 LocksetsMechanical locksets for windows in buildings AS 4145.42002 LocksetsPadlocks AS 41781994 Electromagnetic door holders AS 50072007 Powered doors for pedestrian access and egress BUILDINGS Buildings for commerce and industry AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (H) Set:2008 AS/NZS 3000, Wiring Rules (Hardbound) + Electrical Standards + FREE T-shirt AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS/NZS 3017:2007 Electrical installationsVerification guidelines AS/NZS 3019:2007 Electrical installationsPeriodic verification AS 4349.02007 Inspection of buildingsGeneral requirements AS 46742004 Construction and fit out of food premises Buildings in general AS 1428 (Set)2003 Design for access and mobility Set AS 1428.12001 Design for access and mobilityGeneral requirements for accessNew building work AS 1428.21992 Design for access and mobilityEnhanced and additional requirementsBuildings and facilities AS 1428.31992 Design for access and mobilityRequirements for children and adolescents with physical disabilities AS/NZS 1428.4:2002 Design for access and mobilityTactile indicators AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (H) Set:2008 AS/NZS 3000, Wiring Rules (Hardbound) + Electrical Standards + FREE T-shirt AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS/NZS 3017:2007 Electrical installationsVerification guidelines AS/NZS 3019:2007 Electrical installationsPeriodic verification AS 3959 Set2006 Building in bushfire-prone areas Set
295
BURNERS. BOILERS
SUBJECT INDEX
BURNERS. BOILERS Boilers and heat exchangers AS/NZS 1200:2000 Pressure equipment AS/NZS 1200:1994 Pressure equipment AS 12282006 Pressure equipmentBoilers AS 17321997 Fusible plugs for boilers AS 25932004 BoilersSafety management and supervision systems AS/NZS 3788:2006 Pressure equipmentIn-service inspection AS 38732001 Pressure equipmentOperation and maintenance AS 38922001 Pressure equipmentInstallation AS 40371999 Pressure equipmentExamination and testing AS 43432005 Pressure equipmentHazard levels AS 44581997 Pressure equipmentManufacture AS 49422001 Pressure equipmentGlossary of terms RUL PE.02002 Rulings to pressure equipment StandardsPart 0: Introduction and list of rulings RUL PE.12002 Rulings to pressure equipment StandardsRuling 1: Retention of backing strips in logitudinal joints in refrigeration vessels (Ruling to AS 1210) RUL PE.22002 Rulings to pressure equipment StandardsRuling 2: Nonconforming longitudinal joints in refrigeration vessels (Ruling to AS 1210) RUL PE.32002 Rulings to pressure equipment StandardsRuling 3: Internally fitted doors for beer tanks (Ruling to AS 1210) RUL PE.42002 Rulings to pressure equipment StandardsRuling 4: Pressure containers for paint (Ruling to AS 1210) RUL PE.52002 Rulings to pressure equipment StandardsRuling 5: Sugar processing vacuum pans and evaporatorsTubeplate design and tube fixing (Ruling to AS 1210) RUL PE.62002 Rulings to pressure equipment StandardsRuling 6: Fusion-welded chlorine transport drums (Ruling to AS 1210) RUL PE.72002 Rulings to pressure equipment StandardsRuling 7: Small safety valves (Ruling to AS 1271) RUL PE.82002 Rulings to pressure equipment StandardsRuling 8: Seamless copper pipe joined by brazing (Ruling to AS 4041) RUL PE.92002 Rulings to pressure equipment StandardsRuling 9: Design of pressure equipment using steel having bilateral thickness tolerances (Ruling to AS 1210 and AS 1548) RUL PE.102001 Rulings to pressure equipment StandardsRuling 10: Advanced design vesselsUse of joggled joints (Ruling to AS 1210 Supplement 11990) RUL PE.112001 Rulings to pressure equipment StandardsRuling 11: Advanced design vesselsDesign strength valves (Ruling to AS 1210 Supplement 11990) RUL PE.122004 Rulings to pressure equipment StandardsRuling 12: Minimum nominal thickness of pressure parts (AS 1210 1997) RUL PE.132004 Rulings to pressure equipment StandardsRuling 13: Specified minimum tensile strength of steel for buried and mounded storage vessels (AS 12101997) Gas fuel burners AS 46222004 Electrical and electronic ignition devices for gas appliances AS 46242005 Combination controls for gas AS 46252008 Electronic flame safeguards and flame detectors AS 46272005 Quick-connect devices for gas AS 46282005 Pressure and temperature limit devices for use with gas burners AS 46292005 Automatic shut off valves and vent valves AS 46302005 Leakage detection systems AS 46312005 Limited flexibility connectors for gas AS 46322005 Over-pressure and under-pressure cut off devices CANISTERS see BARRELS. DRUMS. CANISTERS CANS. TINS. TUBES AS 15351975 Moulded plastics household garbage cans AS 23541991 Open top metal cansDefinitions, and determination methods for dimensions and capacities AS 23551990 Open top metal cansCapacities and related dimensions Round cans for food and drink AS 27302004 Double seams for steel-based cans for foods AS 27671994 Rigid plastic containers AS 28542004 Tinplate cans for general use AS 40271992 Food-service container dimensions
AS 39591999 Construction of buildings in bushfire-prone areas AS 39591991 Construction of buildings in bushfire-prone areas AS 4349.02007 Inspection of buildingsGeneral requirements HB 361993 Building in bushfire-prone areasInformation and advice HB 1952002 The Australian Earth Building Handbook Other buildings AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (H) Set:2008 AS/NZS 3000, Wiring Rules (Hardbound) + Electrical Standards + FREE T-shirt AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS/NZS 3017:2007 Electrical installationsVerification guidelines AS/NZS 3019:2007 Electrical installationsPeriodic verification Public buildings AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (H) Set:2008 AS/NZS 3000, Wiring Rules (Hardbound) + Electrical Standards + FREE T-shirt AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS/NZS 3019:2007 Electrical installationsPeriodic verification AS 4349.02007 Inspection of buildingsGeneral requirements Residential buildings AS 1684.2 N1/N2 Supplement 12006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 1: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade F5 (Supplement to AS 1684.22006) AS 1684.2 N1/N2 Supplement 102006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 10: Timber framing span tablesWind classification N1/N2 Unseasoned softwoodStress Grade F5 (Supplement to AS1684.22006) AS 28701996 Residential slabs and footingsConstruction AS 2870 Supplement 11996 Residential slabs and footings ConstructionCommentary (Supplement to AS 28701996) AS 30061982 Adequate electrical installations in domestic premises AS/NZS 3018:2001 Electrical installationsDomestic installations AS 37271993 Guide to residential pavements AS 40552006 Wind loads for housing AS 40551992 Wind loads for housing AS 42991995 Adaptable housing AS 4349.02007 Inspection of buildingsGeneral requirements AS 4349.12007 Inspection of buildingsPre-purchase inspections Residential buildings AS 4349.31998 Inspection of buildingsTimber pest inspections AS 60011999 Working platforms for housing construction CD DOMESTIC2007 Domestic Building Standards CD HB 281997 The design of residential slabs and footings HB 461993 Guide to residential fire safety HB 70.11994 HIA Quality Management SystemQuality Policy Manual HB 70.21994 HIA Quality Management SystemProject Procedure and Inspection Manual HB 1111998 The Domestic Kitchen Handbook HB 132.1 (Set) Structural upgrading of older housesNon-cyclone areas HB 132.11999 Structural upgrading of older housesNon-cyclone areas HB 132.1 Supplement 11999 Structural upgrading of older housesNon-cyclone areasConnections (Supplement to SAA HB132.11999) HB 132.2 (Set) Structural upgrading of older housesCyclone areas HB 132.21999 Structural upgrading of older housesCyclone areas HB 132.2 Supplement 11999 Structural upgrading of older housesCyclone areasConnections (Supplement to HB 132.21999) HB 2602003 Hospital acquired infectionsEngineering down the risk
296
SUBJECT INDEX
CAPACITORS Capacitors in general AS/NZS 61048:2002 Auxiliaries for lampsCapacitors for use in tubular fluorescent and other discharge lamp circuitsGeneral safety requirements AS/NZS 61049:2002 Auxiliaries for lampsCapacitors for use in tubular fluorescent and other discharge lamp circuits Performance requirements CARAVANS AND LIGHT TRAILERS see PASSENGER CARS. CARAVANS AND LIGHT TRAILERS CASES. BOXES. CRATES AS 10482005 International fibreboard box code AS 2400.71990 PackagingTimber boxes AS 35372006 Specification for general purpose corrugated fibreboard boxes and blanks AS 36681989 Flexible intermediate bulk containersNon-dangerous goods AS 37241994 Fibreboard boxes for the export of meat, meat products and offal AS 37731990 Bulk solids containersSafety requirements AS 37741996 Loads on bulk solids containers AS 3774 Supplement 11997 Loads on bulk solids containersCommentary (Supplement to AS 37741996) CELLULAR MATERIALS AS 22811993 Flexible cellular polyurethane for seat cushioning and bedding AS 2282.01999 Methods for testing flexible polyurethaneIntroduction and list of methods AS 2282.11999 Methods for testing flexible cellular polyurethaneSampling and conditioning of test specimens AS 2282.21999 Methods for testing flexible cellular polyurethane Measurement of dimensions of test specimens AS 2282.31999 Methods for testing flexible cellular polyurethane Determination of apparent density AS 2282.41999 Methods for testing flexible cellular polyurethane Determination of apparent density of flexible cellular polyurethane sheeting up to 13 mm thick AS 2282.51999 Methods for testing flexible cellular polyurethane Determination of cell count AS 2282.61999 Methods for testing flexible cellular polyurethane Determination of tensile strength and elongation at break AS 2282.71999 Methods for testing flexible cellular polyurethane Determination of tear resistance AS 2282.81999 Methods for testing flexible cellular polyurethane Determination of force deflection AS 2282.91999 Methods for testing flexible cellular polyurethane Determination of compression set AS 2282.101999 Methods for testing flexible cellular polyurethane Accelerated ageing tests AS 2282.111999 Methods for testing flexible cellular polyurethane Determination of resilience AS 2282.121999 Methods for testing flexible cellular polyurethane Determination of compression fatigue AS 2282.131999 Methods for testing flexible cellular polyurethane Determination of solvent swelling AS 2282.141999 Methods for testing flexible cellular polyurethane Determination of air flow AS 2282.151999 Methods for testing flexible cellular polyurethane Determination of smoke release AS 2282.161999 Methods for testing flexible cellular polyurethane Determination of ash content AS 2498.01993 Methods of testing rigid cellular plasticsGeneral introduction and list of methods AS 2498.11993 Methods of testing rigid cellular plasticsSampling and conditioning AS 2498.21993 Methods of testing rigid cellular plasticsDetermination of linear dimensions AS 2498.31993 Methods of testing rigid cellular plasticsDetermination of compressive stress AS 2498.41993 Methods of testing rigid cellular plasticsDetermination of cross-breaking strength AS 2498.51993 Methods of testing rigid cellular plasticsDetermination of water vapour transmission rate AS 2498.61993 Methods of testing rigid cellular plasticsDetermination of dimensional stability AS 2498.71993 Methods of testing rigid cellular plasticsDetermination of volume percentage of open and closed cells
CAPACITORS
AS 2498.81991 Methods of testing rigid cellular plasticsDetermination of water absorption CERAMICS Ceramic products AS 40231992 Non-vitreous china used in sanitary appliances CHARACTER SETS AND INFORMATION CODING AS 13401975 Symbols for SI units for systems with limited character sets AS 24821989 Geographic information systemsGeographic data Interchange of feature-coded digital mapping data AS 27421984 Information processingUse of longitudinal parity to detect errors in information messages AS 27601985 Text communicationRegistration of graphic character subrepertoires AS 27611989 Character sets and information codingControl functions for 7-bit and 8-bit coded character sets AS 2793.11985 Information processingCoded character sets for text communicationGeneral information AS 2793.21985 Information processingCoded character sets for text communicationLatin alphabetic and non-alphabetic graphic characters AS/NZS 2807:2000 Reporting outstanding orders (in the book trade) AS/NZS 3654:1996 Information technologySpecification for a data descriptive file for information interchange AS 37671990 Information processingRepresentation of numerical values in character strings for information interchange AS 3874.11991 Information processingPicture coding methods Identification AS/NZS 4189.1:1994 Information technologyUniversal multiple-octet coded Character Set (UCS)Architecture and basic multilingual plane AS/NZS 4230.1:1994 Information technologyCoding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s Systems AS/NZS 4230.2:1994 Information technologyCoding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s Video AS/NZS 4230.3:1994 Information technologyCoding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s Audio AS/NZS 4230.4:1997 Information technologyCoding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s Compliance testing AS/NZS 4230.5:1999 Information technologyCoding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s Software simulation AS/NZS 4472:1997 Information technologyCoded representation of picture and audio informationProgressive bi-level image compression AS/NZS 4473.1:1997 Information technologyDigital compression and coding of continuous-tone still imagesRequirements and guidelines AS 45902006 Interchange of client information AS 47212000 Personal privacy practices for the electronic tolling industry AS/NZS 4819:2003 Geographic informationRural and urban addressing AS 49372002 Electronic messages for exchange of claim and related information AS 50452004 Information technologySecurity techniquesSpecification of TTP services to support the application of digital signatures AS ISO/IEC 6523.12005 Information technologyStructure for the identification of organizations and organization partsIdentification of organization identification schemes AS ISO/IEC 6523.22005 Information technologyStructure for the identification of organizations and organization partsRegistration of organization identification schemes AS/NZS ISO 6709:2008 Standard representation of latitude, longitude and altitude for geographic point locations AS/NZS 7799.2:2003 Information security managementSpecification for information security management systems AS/NZS ISO/IEC 9798.2:2008 Information technologySecurity techniques Entity authenticationMechanisms using symmetric encipherment algorithms AS/NZS ISO/IEC 9798.4:2008 Information technologySecurity techniques Entity authenticationMechanisms using a cryptographic check function AS ISO/IEC 9798.52006 Information technologySecurity techniques Entity authenticationMechanisms using zero-knowledge techniques AS/NZS ISO/IEC 9798.6:2006 Information technologySecurity techniques Entity authenticationMechanisms using manual data transfer AS ISO/IEC 10118.12006 Information technologySecurity techniques Hash-functionsGeneral AS ISO/IEC 10118.22006 Information technologySecurity techniques Hash-functionsHash-functions using an n-bit block cipher
297
SUBJECT INDEX
AS ISO/IEC 14496.82004 Information technologyCoding of audio-visual objectsCarriage of ISO/IEC 14496 contents over IP networks AS ISO/IEC 14496.102006 Information technologyCoding of audio-visual objectsAdvanced Video Coding AS ISO/IEC 14496.112006 Information technologyCoding of audio-visual objectsScene description and application engine AS ISO/IEC 14496.122004 Information technologyCoding of audio-visual objectsISO base media file format AS ISO/IEC 14496.132005 Information technologyCoding of audio-visual objectsIntellectual Property Management and Protection (IPMP) extensions AS ISO/IEC 14496.142004 Information technologyCoding of audio-visual objectsMP4 file format AS ISO/IEC 14496.152004 Information technologyCoding of audio-visual objectsAdvanced video coding (AVC) file format AS ISO/IEC 14496.162004 Information technologyCoding of audio-visual objectsAnimation Framework eXtension (AFX) AS ISO/IEC 14496.172006 Information technologyCoding of audio-visual objectsStreaming text format AS ISO/IEC 14496.182004 Information technologyCoding of audio-visual objectsFont compression and streaming AS ISO/IEC 14496.192004 Information technologyCoding of audio-visual objectsSynthesized texture stream AS ISO/IEC 14496.212008 Information technologyCoding of audio-visual objectsMPEG-J Graphics Framework eXtensions (GFX) AS ISO/IEC 145162004 Information technologySecurity techniques Guidelines for the use and management of Trusted Third Party services AS ISO/IEC 149572005 Information technologyNotation of format for data element values AS ISO/IEC 152922004 Information technologySecurity techniques Protection profile registration procedures AS ISO/IEC 15408.12004 Information technologySecurity techniques Evaluation criteria for IT securityIntroduction and general model AS ISO/IEC 15408.22004 Information technologySecurity techniques Evaluation criteria for IT securitySecurity functional requirements AS ISO/IEC 15408.32004 Information technologySecurity techniques Evaluation criteria for IT securitySecurity assurance requirements AS ISO/IEC 154182006 Information technologyEAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance AS ISO/IEC 154242006 Information technologyAutomatic identification and data capture techniquesData Carrier Identifiers (including Symbology Identifiers) AS/NZS ISO/IEC 15443.1:2006 Information technologySecurity techniquesA framework for IT security assuranceOverview and framework AS ISO/IEC 15444.12004 Information technologyJPEG 2000 image coding systemCore coding system AS ISO/IEC 15444.22004 Information technologyJPEG 2000 image coding systemExtensions AS ISO/IEC 15444.42004 Information technologyJPEG 2000 image coding systemConformance testing AS ISO/IEC 15444.62004 Information technologyJPEG 2000 image coding systemCompound image file format AS ISO/IEC 15444.92006 Information technologyJPEG 2000 image coding systemInteractivity tools, APIs and protocols AS ISO/IEC 15444.122004 Information technologyJPEG 2000 image coding systemISO base media file format AS ISO/IEC 154522005 Information technologySpecification of data value domains AS ISO/IEC 15459.12006 Information technologyUnique identifiers Unique identifiers for transport units AS ISO/IEC 15459.22006 Information technologyUnique identifiers Registration procedures AS ISO/IEC 15459.32006 Information technologyUnique identifiers Common rules for unique identifiers AS ISO/IEC 15459.42006 Information technologyUnique identifiers Unique identifiers for supply chain management AS/NZS 15938.1:2003 Information technologyMultimedia content description interfaceSystems AS/NZS 15938.2:2003 Information technologyMultimedia content description interfaceDescription definition language AS/NZS 15938.3:2003 Information technologyMultimedia content description interfaceVisual AS/NZS 15938.4:2003 Information technologyMultimedia content description interfaceAudio AS ISO/IEC 15938.52004 Information technologyMultimedia content description interfaceMultimedia description schemes
AS ISO/IEC 10118.32006 Information technologySecurity techniques Hash-functionsDedicated hash-functions AS ISO/IEC 10118.3 Supplement 12006 Information technologySecurity techniquesHash-functionsDedicated hash-functionsSupplement 1: Dedicated Hash-Function 8 (SHA-224) (Supplement to AS ISO/IEC 10118.32006) AS ISO/IEC 10118.42006 Information technologySecurity techniques Hash-functionsHash-functions using modular arithmetic AS ISO/IEC 11179.12005 Information technologyMetadata registries (MDR)Framework AS ISO/IEC 11179.22005 Information technologyMetadata registries (MDR)Classification for data elements AS ISO/IEC 11179.32005 Information technologyMetadata registries (MDR)Registry metamodel and basic attributes AS ISO/IEC 11179.42005 Information technologyMetadata registries (MDR)Formulation of data definitions AS ISO/IEC 11179.52005 Information technologyMetadata registries (MDR)Naming and identification principles for data elements AS ISO/IEC 11179.62005 Information technologyMetadata registries (MDR)Registration AS 11770.12003 Information technologySecurity techniquesKey managementFramework AS/NZS ISO/IEC 11770.2:2008 Information technologySecurity techniquesKey managementMechanisms using symmetric techniques AS/NZS ISO/IEC 11770.3:2008 Information technologySecurity techniquesKey managementMechanisms using asymmetric techniques AS/NZS ISO/IEC 11770.4:2008 Information technology-Security techniquesKey managementMechanisms based on weak secrets AS 13335 (Set)2003 Information technologyGuidelines for the management of IT Security AS 13335.12003 Information technologyGuidelines for the management of IT SecurityConcepts and models for IT Security AS 13335.22003 Information technologyGuidelines for the management of IT SecurityManaging and planning IT Security AS 13335.32003 Information technologyGuidelines for the management of IT SecurityTechniques for the management of IT Security AS 13335.42003 Information technologyGuidelines for the management of IT SecuritySelection of safeguards AS 13335.52003 Information technologyGuidelines for the management of IT SecurityManagement guidance on network security AS/NZS 13818.1:2002 Information technologyGeneric coding of moving pictures and associated audio informationSystems AS/NZS 13818.2:2002 Information technologyGeneric coding of moving pictures and associated audio informationVideo AS/NZS 13818.3:1999 Information technologyGeneric coding of moving pictures and associated audio informationAudio AS/NZS 13818.4:2002 Information technologyGeneric coding of moving pictures and associated audio informationConformance testing AS/NZS 13818.5:1999 Information technologyGeneric coding of moving pictures and associated audio informationSoftware simulation AS/NZS 13818.6:1999 Information technologyGeneric coding of moving pictures and associated audio informationExtensions for DSM-CC AS ISO/IEC 13818.72006 Information technologyGeneric coding of moving pictures and associated audio informationAdvanced Audio Coding (AAC) AS/NZS 13818.9:1999 Information technologyGeneric coding of moving pictures and associated audio informationExtension for real time interface for systems decoders AS/NZS 13818.10:2002 Information technologyGeneric coding of moving pictures and associated audio informationConformance extensions for Digital Storage Media Command and Control (DSM-CC) AS ISO/IEC 13818.112004 Information technologyGeneric coding of moving pictures and associated audio informationIPMP on MPEG-2 systems AS/NZS 14496.1:2002 Information technologyCoding of audio-visual objectsSystems AS/NZS 14496.1-6:2002 (CD-ROM) Information technologyCoding of audio-visual objects AS/NZS 14496.2:2002 Information technologyCoding of audio-visual objectsVisual AS/NZS 14496.3:2002 Information technologyCoding of audio-visual objectsAudio AS/NZS 14496.4:2002 Information technologyCoding of audio-visual objectsConformance testing AS/NZS 14496.5:2002 Information technologyCoding of audio-visual objectsReference software AS/NZS 14496.6:2002 Information technologyCoding of audio-visual objectsDelivery Multimedia Integration Framework (DMIF)
298
SUBJECT INDEX
AS ISO/IEC 15938.62005 Information technologyMultimedia content description interfaceReference software AS 15938.72004 Information technologyMultimedia content description interfaceConformance testing AS ISO/IEC 15938.92006 Information technologyMultimedia content description interfaceProfiles and levels AS ISO/IEC 15938.102006 Information technologyMultimedia content description interfaceSchema definition AS ISO/IEC 15938.112006 Information technologyMultimedia content description interfaceMPEG-7 profile schemas AS ISO/IEC 159472004 Information technologySecurity techniquesIT intrusion detection framework AS ISO/IEC 159612006 Information technologyRadio frequency identification (RFID) for item managementData protocol: application interface AS ISO/IEC 159622006 Information technologyRadio frequency identification (RFID) for item managementData protocol: data encoding rules and logical memory functions AS ISO/IEC 159632006 Information technologyRadio frequency identification for item managementUnique identification for RF tags AS/NZS ISO/IEC 17799:2001 Information technologyCode of practice for information security management AS ISO/IEC 18000.12007 Information technologyRadio frequency identification for item managementReference architecture and definition of parameters to be standardized AS ISO/IEC 18000.22007 Information technologyRadio frequency identification for item managementParameters for air interface communications below 135 kHz AS ISO/IEC 18000.32007 Information technologyRadio frequency identification for item managementParameters for air interface communications at 13.56 MHz AS ISO/IEC 18000.42007 Information technologyRadio frequency identification for item managementParameters for air interface communications at 2.45 GHz AS ISO/IEC 18000.62007 Information technologyRadio frequency identification for item managementParameters for air interface communications at 860 MHz to 960 MHz AS ISO/IEC 18000.72007 Information technologyRadio frequency identification for item managementParameters for active air interface communications at 433 MHz AS/NZS ISO/IEC 18028.1:2008 Information technologySecurity techniquesIT network securityNetwork security management AS/NZS ISO/IEC 18028.2:2006 Information technologySecurity techniquesIT network securityNetwork security architecture AS/NZS ISO/IEC 18028.3:2006 Information technologySecurity techniquesIT network securitySecuring communications between networks using security gateways AS/NZS ISO/IEC 18028.4:2006 Information technologySecurity techniquesIT network securitySecuring remote access AS/NZS ISO/IEC 18028.5:2008 Information technologySecurity techniquesIT network securitySecuring communications across networks using virtual private networks AS/NZS ISO/IEC 18033.1:2006 Information technologySecurity techniquesEncryption algorithmsGeneral AS/NZS ISO/IEC 18033.2:2008 Information technologySecurity techniquesEncryption algorithmsAsymmetric ciphers AS/NZS ISO/IEC 18033.3:2006 Information technologySecurity techniquesEncryption algorithmsBlock ciphers AS/NZS ISO/IEC 18033.4:2006 Information technologySecurity techniquesEncryption algorithmsStream ciphers AS/NZS ISO/IEC 18044:2006 Information technologySecurity techniques Information security incident management AS ISO/IEC 180462007 Information technologyAutomatic identification and data capture techniquesRadio frequency identification device performance test methods AS ISO/IEC 18047.32006 Information technologyRadio frequency identification device conformance test methodsTest methods for air interface communications at 13.56 MHz AS ISO/IEC 18047.42006 Information technologyRadio frequency identification device conformance test methodsTest methods for air interface communications at 2.45 GHz AS ISO/IEC 18047.72006 Information technologyRadio frequency identification device conformance test methodsTest methods for active air interface communications at 433 MHz AS/NZS ISO 19131:2008 Geographic informationData product specifications AS/NZS ISO 19134:2008 Geographic informationLocation-based services Multimodal routing and navigation
AS/NZS ISO 19136:2008 Geographic informationGeography Markup Language (GML) AS/NZS ISO 19137:2008 Geographic informationCore profile of the spatial schema AS/NZS ISO 19138:2008 Geographic informationData quality measures AS/NZS ISO 19139:2008 Geographic informationMetadataXML schema implementation AS ISO/IEC 19784.12007 Information technologyBiometric application programming interfaceBioAPI specification AS ISO/IEC 19785.12007 Information technologyCommon Biometric Exchange Formats FrameworkData element specification AS ISO/IEC 19785.22007 Information technologyCommon Biometric Exchange Formats FrameworkProcedure for the operation of the Biometric Registration Authority AS/NZS ISO/IEC 19790:2006 Information technologySecurity techniques Security requirements for cryptographic modules AS ISO/IEC 19794.12007 Information technologyBiometric data interchange formatsFramework AS ISO/IEC 19794.22007 Information technologyBiometric data interchange formatsFinger minutiae data AS ISO/IEC 19794.32007 Information technologyBiometric data interchange formatsFinger pattern spectral data AS ISO/IEC 19794.42007 Information technologyBiometric data interchange formatsFinger image data AS ISO/IEC 19794.52007 Information technologyBiometric data interchange formatsFace image data AS ISO/IEC 19794.62007 Information technologyBiometric data interchange formatsIris image data AS ISO/IEC 19795.12007 Information technologyBiometric performance testing and reportingPrinciples and framework AS ISO/IEC 20943.12005 Information technologyProcedures for achieving metadata registry content consistencyData elements AS ISO/IEC 20943.32005 Information technologyProcedures for achieving metadata registry content consistencyValue domains AS ISO/IEC 21000.22006 Information technologyMultimedia framework (MPEG-21)Digital Item Declaration AS ISO/IEC 21000.32004 Information technologyMultimedia framework (MPEG-21)Digital Item Identification AS ISO/IEC 21000.42006 Information technologyMultimedia framework (MPEG-21)Intellectual Property Management and Protection Components AS ISO/IEC 21000.52004 Information technologyMultimedia framework (MPEG-21)Rights Expression Language AS ISO/IEC 21000.62004 Information technologyMultimedia framework (MPEG-21)Rights data dictionary AS ISO/IEC 21000.72005 Information technologyMultimedia framework (MPEG 21)Digital item adaptation AS ISO/IEC 21000.82006 Information technologyMultimedia framework (MPEG-21)Reference Software AS ISO/IEC 21000.92005 Information technologyMultimedia framework (MPEG-21)File Format AS ISO/IEC 21000.102006 Information technologyMultimedia framework (MPEG-21)Digital Item Processing AS ISO/IEC 21000.152008 Information technologyMultimedia framework (MPEG-21)Event reporting AS ISO/IEC 21000.162006 Information technologyMultimedia framework (MPEG-21)Binary Format AS ISO/IEC 23001.12006 Information technologyMPEG systems technologiesBinary MPEG format for XML AS ISO/IEC 23002.12008 Information technologyMPEG video technologiesAccuracy requirements for implementation of integer-output 8 x 8 inverse discrete cosine transform AS/NZS ISO/IEC 27001 Set:2006 Information technologyBasic Set AS/NZS ISO/IEC 27001:2006 Information technologySecurity techniques Information security management systemsRequirements AS/NZS ISO/IEC 27002:2006 Information technologySecurity techniques Code of practice for information security management ICT Set2006 Corporate governance of Information and Communication Technology (ICT) Set HB 74:1996 X.400 Security Implementation Guide HB 1712003 Guidelines for the management of IT evidence HB 1742003 Information security managementImplementation guide for the health sector HB 231:2004 Information security risk management guidelines HB 256:2007 Metadata usage in Australian and New Zealand education and training
299
CHARACTER SYMBOLS
SUBJECT INDEX
CLOTHES AS 11821997 Size coding scheme for infants' and children's clothing Underwear and outerwear AS/NZS 1249:2003 Children's nightwear and limited daywear having reduced fire hazard AS/NZS 1249:1999 Children's nightwear and limited daywear having reduced fire hazard AS 12491990 Children's nightclothes having reduced fire hazard AS 13441997 Size coding scheme for women's clothingUnderwear, outerwear and foundation garments AS/NZS 1957:1998 TextilesCare labelling AS/NZS 2392:1999 TextilesLabelling of clothing, household textiles and furnishings AS/NZS 2621:1998 TextilesGuide to the selection of correct care labelling instructions from AS/NZS 1957 AS/NZS 4399:1996 Sun protective clothingEvaluation and classification CLOTHING ACCESSORIES see HEADGEAR. CLOTHING ACCESSORIES. FASTENING OF CLOTHING COALS AS 1038.12001 Coal and cokeAnalysis and testingHigher rank coal Total moisture AS 1038.22006 Coal and cokeAnalysis and testingCokeTotal moisture AS 1038.32000 Coal and cokeAnalysis and testingProximate analysis of higher rank coal AS 1038.42006 Coal and cokeAnalysis and testingCokeProximate analysis AS 1038.51998 Coal and cokeAnalysis and testingGross calorific value AS 1038.6.11997 Coal and cokeAnalysis and testingHigher rank coal and cokeUltimate analysisCarbon and hydrogen AS 1038.6.22007 Coal and cokeAnalysis and testingHigher rank coal and cokeUltimate analysisNitrogen AS 1038.6.3.11997 Coal and cokeAnalysis and testingHigher rank coal and cokeUltimate analysisTotal sulfurEschka method AS 1038.6.3.22003 Coal and cokeAnalysis and testingHigher rank coal and cokeUltimate analysisTotal sulfurHigh-temperature combustion method AS 1038.6.3.31997 Coal and cokeAnalysis and testingHigher rank coal Ultimate analysisTotal sulfurInfrared method AS 1038.6.42005 Coal and cokeAnalysis and testingHigher rank coal and cokeUltimate analysisCarbon, hydrogen and nitrogen Instrumental method AS 1038.8.11999 Coal and cokeAnalysis and testingCoal and coke ChlorineEschka method AS 1038.8.22003 Coal and cokeAnalysis and testingCoal and coke ChlorineHigh-temperature combustion method AS 1038.9.12000 Coal and cokeAnalysis and testingHigher rank coal and cokePhosphorusAsh digestion/molybdenum blue method AS 1038.9.22000 Coal and cokeAnalysis and testingHigher rank coal PhosphorusCoal extraction/phosphomolybdovanadate method AS 1038.9.32000 Coal and cokeAnalysis and testingCoal and coke PhosphorusAsh digestion/phosphomolybdovanate method AS 1038.9.42006 Coal and cokeAnalysis and testingHigher rank coal PhosphorusBorate fusion/molybdenum blue method AS 1038.10.02002 Coal and cokeAnalysis and testingDetermination of trace elementsGuide to the determination of trace elements AS 1038.10.12003 Coal and cokeAnalysis and testingDetermination of trace elementsCoal, coke and fly-ashDetermination of eleven trace elementsFlame atomic absorption spectrometric method AS 1038.10.21998 Coal and cokeAnalysis and testingDetermination of trace elementsCoal and cokeDetermination of arsenic, antimony and seleniumHydride generation method AS 1038.10.31998 Coal and cokeAnalysis and testingDetermination of trace elementsCoal and cokeDetermination of boron contentICPAES method AS 1038.10.42001 Coal and cokeAnalysis and testingDetermination of trace elementsCoal, coke and fly-ashDetermination of fluorine contentPyrohydrolysis method AS 1038.10.5.12003 Coal and cokeAnalysis and testing- Coal, coke and fly-ashTrace elementsDetermination of mercury contentTube combustion method AS 1038.10.5.22007 Coal and cokeAnalysis and testingCoal and flyashTrace elementsDetermination of mercury contentAcid extraction method AS 1038.112002 Coal and cokeAnalysis and testingCoalForms of sulfur AS 1038.12.12002 Coal and cokeAnalysis and testingHigher rank coal Caking and coking propertieseCrucible swelling number
HB 2802006 Case StudiesHow Boards and Senior Management Have Governed ICT Projects to Succeed (or Fail) HB 3242008 Lexicon of Key Terms used in Security CHARACTER SYMBOLS AS 17441975 Forms of letters and numerals for road signs (known as Standard alphabets for road signs) CHARACTERISTICS AND DESIGN OF MACHINES, APPARATUS, EQUIPMENT AS 1101.41989 Graphical symbols for general engineeringMachine elements AS 60204.12005 Safety of machineryElectrical equipment of machines General requirements (IEC60204-1, Ed. 5 (FDIS) MOD) AS 60204.112006 Safety of machineryElectrical equipment of machines Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 60204-11, Ed. 1.0 (2000) MOD) AS IEC 610142004 Programmes for reliability growth HB 61999 Design Standards for mechanical engineering students CHEMISTRY see PHYSICS. CHEMISTRY CHIPLESS WORKING EQUIPMENT Forging equipment. Presses. Shears AS 12191994 Power pressesSafety requirements Presses see Forging equipment. Presses. Shears Shears see Forging equipment. Presses. Shears CINEMATOGRAPHY Motion picture equipment AS/NZS 60598.2.9:2006 LuminairesParticular requirements Photo and film luminaires (non-professional)(IEC60598-2-9, Ed. 2.0 (1987) MOD) CIVIL ENGINEERING IN GENERAL AS 11811982 Method of measurement of civil engineering works and associated building works HB 2.11998 Australian Standards for civil engineering studentsMaterials and testing HB 2.22003 Australian Standards for civil engineering studentsStructural engineering CLEANING APPLIANCES AS/NZS 3350.2.2:2001 Safety of household and similar electrical appliances- Particular requirements for vacuum cleaners and water suction cleaning appliances (IEC 60335-2-2:1993, MOD) AS/NZS 3350.2.10:1996 Safety of household and similar electrical appliancesParticular requirementsFloor treatment machines and wet scrubbing machines AS/NZS 3350.2.54:1997 Safety of household and similar electrical appliancesParticular requirementsSurface-cleaning appliances employing liquids AS/NZS 60335.2.2:2002 Household and similar electrical appliances Safety- Particular requirements for vacuum cleaners and water suction cleaning appliances (IEC 60335-2-2 Ed 5.2, MOD) AS/NZS 60335.2.10:2006 Household and similar electrical appliances SafetyParticular requirements for floor treatment machines and wet scrubbing machines(IEC 60335-2-10 Ed 5, IDT) AS/NZS 60335.2.54:2005 Household and similar electrical appliances Safety- Particular requirements for surface-cleaning appliances for household use employing liquids or steam (IEC 60335-2-54 Ed 3.1, IDT) AS/NZS 60335.2.67:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for floor treatment and floor cleaning machines, for industrial and commercial use AS/NZS 60335.2.69:2003 Household and Similar Electrical Appliances Safety- Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use AS/NZS 60335.2.70:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for milking machines AS/NZS 60335.2.71:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for electrical heating appliances for breeding and rearing animal AS/NZS 60335.2.72:2003 Household and Similar Electrical Appliances Safety- Particular requirements for automatic machines for floor treatment for commercial and industrial use AS/NZS 60335.2.86:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for appliances for electric fishing machines AS/NZS 60335.2.100:2003 Household and similar electrical appliances Safety- Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
300
SUBJECT INDEX
AS 1038.12.21999 Coal and cokeAnalysis and testingHigher rank coal Caking and coking propertiesDetermination of Gray-King coke type AS 1038.12.32002 Coal and cokeAnalysis and testingHigher rank coal Caking and coking propertiesDilatation AS 1038.12.4.11996 Coal and cokeAnalysis and testing- Higher rank coalCaking and coking propertiesPlasticityContinuous-torque Gieseler method AS 1038.131990 Coal and cokeAnalysis and testingTests specific to coke AS 1038.14.12003 Coal and cokeAnalysis and testingHigher rank coal ash and coke ashMajor and minor elementsBorate fusion/flame atomic absorption spectrometric method AS 1038.14.22003 Coal and cokeAnalysis and testingHigher rank coal ash and coke ashMajor and minor elementsAcid digestion/flame atomic absorption spectrometric method AS 1038.14.31999 Coal and cokeAnalysis and testingHigher rank coal ash and coke ashMajor and minor elementsWavelength dispersive Xray fluorescence spectrometric method AS 1038.151995 Coal and cokeAnalysis and testingHigher rank coal ash and coke ashAsh fusibility AS 1038.162005 Coal and cokeAnalysis and testingAssessment and reporting of results AS 1038.172000 Coal and cokeAnalysis and testingHigher rank coal Moisture-holding capacity (equilibrium moisture) AS 1038.182006 Coal and cokeAnalysis and testingCokeSize analysis AS 1038.192000 Coal and cokeAnalysis and testingHigher rank coal Abrasion Index AS 1038.202002 Coal and cokeAnalysis and testingHigher rank coal Hardgrove grindability index AS 1038.21.1.12008 Coal and cokeAnalysis and testingHigher rank coal and cokeRelative densityAnalysis sample/density bottle method AS 1038.21.1.22002 Coal and cokeAnalysis and testingHigher rank coal and cokeRelative densityAnalysis sample/volumetric method AS 1038.222000 Coal and cokeAnalysis and testingHigher rank coal Mineral matter and water of constitution AS 1038.232002 Coal and cokeAnalysis and testingHigher rank coal and cokeCarbonate carbon AS 1038.241998 Coal and cokeAnalysis and testingGuide to the evaluation of measurements made by on-line coal analysers AS 1038.252002 Coal and cokeAnalysis and testingCoalDurham cone handleability AS 1038.262005 Coal and cokeAnalysis and testingHigher rank coal and cokeGuide for the determination of apparent relative density AS 20961987 Classification and coding systems for Australian coals AS 24181995 Coal and cokeGlossary of terms AS 2434.11999 Methods for the analysis and testing of lower rank coal and its charsDetermination of the total moisture content of lower rank coal AS 2434.22002 Methods for the analysis and testing of lower rank coal and its charsLower rank coalDetermination of volatile matter AS 2434.32002 Methods for the analysis and testing of lower rank coal and its charsLower rank coalDetermination of the moisture holding capacity AS 2434.42002 Methods for the analysis and testing of lower rank coal and its charsDried lower rank coal and its charsDetermination of apparent densityMercury displacement method AS 2434.52002 Methods for the analysis and testing of lower rank coal and its charsLower rank coal and its charsDetermination of moisture in bulk samples of lower rank coal and in analysis samples of char AS 2434.62002 Methods for the analysis and testing of lower rank coal and its charsLower rank coalUltimate analysisClassical methods AS 2434.72002 Methods for the analysis and testing of lower rank coal and its charsLower rank coalDetermination of moisture in the analysis sample AS 2434.82002 Methods for the analysis and testing of lower rank coal and its charsLower rank coalDetermination of ash AS 2434.92000 Method for the analysis and testing of lower rank coal and its charsDetermination of four acid-extractable ions in lower rank coal AS 25191993 Guide to the technical evaluation of higher rank coal deposits AS 26171996 Sampling from coal seams AS 2856.12000 Coal petrographyPreparation of coal samples for incident light microscopy AS 2856.21998 Coal petrographyMaceral analysis AS 2856.32000 Coal petrographyMethod for microscopical determination of the reflectance of coal macerals AS 29162007 Symbols for graphic representation of coal seams and associated strata AS 38801991 Bin flow properties of coal
COLOUR CODING
AS 38812002 Higher rank coalSize analysis AS 38992002 Higher rank coal and cokeBulk density AS 39801999 Guide to the determination of gas content of coalDirect desorption method AS 4156.11994 Coal preparationHigher rank coalFloat and sink testing AS 4156.2.12004 Coal preparationHigher rank coalFroth flotationBasic test AS 4156.2.21998 Coal preparationHigher rank coalFroth flotation Sequential procedure AS 4156.32008 Coal preparationMagnetite for coal preparation plant use Test methods AS 4156.41999 Coal preparationFlowsheets and symbols AS 4156.62000 Coal preparationDetermination of dust/moisture relationship for coal AS 4156.71999 Coal preparationCoal size classifying equipment Performance evaluation AS 4156.82007 Coal preparationSample pre-treatmentDrop-shatter AS 4264.11995 Coal and cokeSamplingHigher rank coalSampling procedures AS 4264.21996 Coal and cokeSamplingCokeSampling procedures AS 4264.31996 Coal and cokeSamplingLower rank coalSampling procedures AS 4264.41996 Coal and cokeSamplingDetermination of precision and bias AS 4264.51999 Coal and cokeSamplingGuide to the inspection of mechanical sampling systems ASCRM 003-21993 Certified reference electrode carbonSample 2 ASRM 010-22006 Standard reference materialCoal ash ASCRM 011-112008 Reference materialCoalHardgrove grindability index ASCRM 012A-22002 Certified reference materialCoal sample with total sulfur of 0.33% ASCRM 012C-32008 Certified reference materialCoal sample having total sulfur of approximately 1.22% ASCRM 012D-21998 Certified reference materialCoal sample having total sulfur of 5.21% ASRM 0152005 Reference materialCoalRelative density TR 2.3-21993 Certified reference materialsElectrode carbonPreparation and certification of ASCRM 003-2 (for use in Gray-King coke type test (AS 1038.12.2)) TR 2.10-22006 Reference materialsCoal ashPreparation of ASRM 010-2 TR 2.11-112008 Certified reference materialsCoalPreparation and certification of ASCRM 011-11 (Hardgrove grindability index) TR 2.12A-22002 Certified reference materialsCoalPreparation and certification of ASCRM 012A-2 TR 2.12C-32008 Certified reference materialsCoalPreparation and certification of ASCRM 012C-3 TR 2.12D-21998 Certified reference materialsCoalPreparation and certification of ASCRM 012D-2 COLOUR CODING AS 13181985 Use of colour for the marking of physical hazards and the identification of certain equipment in industry (known as the SAA Industrial Safety Colour Code) (incorporating Amdt 1) AS 16132005 TimberColours for marking F-grades AS/NZS 4496:1997 Recommended practice for the colour coding of steel products COMMERCIAL VEHICLES Commercial vehicles in general AS 47352003 Heavy road vehiclesElectrical connectors for articulated vehicles AS 49452000 Commercial road vehiclesInterchangeable quick connect/release couplings for use with air-pressure braking systems AS 50622006 Fire protection for mobile and transportable equipment Trucks and trailers AS 2174.12006 Heavy road vehiclesMechanical coupling between prime movers and semitrailersInterchangeability requirementsNon-dedicated vehicle combinations AS 2174.11994 Articulated vehiclesMechanical coupling between prime movers and semitrailersInterchangeability requirementsNon-dedicated vehicle combinations AS 2174.22006 Heavy road vehiclesMechanical coupling between prime movers and semitrailersInterchangeability requirementsDedicated vehicle combinations
301
SUBJECT INDEX
AS 80152005 Corporate governance of information and communication technology AS/NZS ISO 9000 Set:2008 Quality Management Systems Set AS/NZS ISO 9001:2008 Quality management systems Requirements AS/NZS ISO 9001:2000 Quality management systems Requirements AS/NZS ISO 9001:2000 (SP) Quality management systems Requirements AS/NZS ISO/IEC 16085:2007 Information technologySystems and software engineeringLife cycle processesRisk management ICT Set2006 Corporate governance of Information and Communication Technology (ICT) Set LEGAL RISK SET2007 Legal Risk Management Set MANUFACTURING CD2006 Manufacturing Standards on CD HB 90.0:2000 The ISO 9001 Comparison2000 vs 1994The ISO 9001 Comparison2000 vs 1994 HB 90.1 Set2006 Quality for Small Business Set HB 90.12000 The Small Business HandbookGuide to ISO 9001:2000The Small Business HandbookGuide to ISO 9001:2000 HB 90.2 Set2006 Quality for the Service Industry Set HB 90.22000 The Service Industry HandbookGuide to ISO 9001:2000The Service Industry HandbookGuide to ISO 9001:2000 HB 90.3 Set2006 Quality for the Construction Industry Set HB 90.32000 The Construction IndustryGuide to ISO 9001:2000 The Construction IndustryGuide to ISO 9001:2000 HB 90.42000 The Food Processing IndustryGuide to ISO 9001:2000The Food Processing IndustryGuide to ISO 9001:2000 HB 90.52000 Correlation between ISO 9001:2000 and the HACCP PrinciplesCorrelation between ISO 9001:2000 and the HACCP Principles HB 90.6 Set2006 Quality for the Legal Profession Set HB 90.62000 The Legal ProfessionGuide to ISO 9001:2000The Legal ProfessionGuide to ISO 9001:2000 HB 90.7 Set2006 Quality for Education and Training Set HB 90.72000 Education and TrainingGuide to ISO 9001:2000 Education and TrainingGuide to ISO 9001:2000 HB 90.8 Set2006 Quality for Healthcare Services Set HB 90.82000 Healthcare ServicesGuide to ISO 9001:2000 Healthcare ServicesGuide to ISO 9001:2000 HB 90.9 Set2006 Quality for Software Development Set HB 90.92000 Software DevelopmentGuide to ISO 9001:2000 Software DevelopmentGuide to ISO 9001:2000 HB 1412004 Risk financing guidelines HB 1582006 Delivering assurance based on AS/NZS 4360:2004 Risk Management HB 167:2006 Security risk management HB 1712003 Guidelines for the management of IT evidence HB 1892004 Knowledge Management Terminology and ReadingsAn Australian Guide HB 1902006 Success through knowledge: a guide for small business HB 205 (Set)2004 OHS Risk Management Set HB 2052004 OHS Risk Management Handbook HB 2112001 Occupational health and safety management systemsA guide to AS 4801 for small business HB 221:2004 Business Continuity Management HB 231:2004 Information security risk management guidelines HB 2402004 Guidelines for managing risk in outsourcing utilizing the AS/NZS4360:2004 process HB 2462004 Guidelines for Managing Risk in Sport and Recreation HB 2542005 Governance, risk management and control assurance HB 2642003 Power qualityRecommendations for the application of AS/NZS 61000.3.6 and AS/NZS 61000.3.7 HB 2652005 Meta ManagementA stakeholder/quality management approach to whole-of-enterprise management HB 2802006 Case StudiesHow Boards and Senior Management Have Governed ICT Projects to Succeed (or Fail) HB 292 Set2006 Business Continuity Management Handbooks Set
AS 2174.21994 Articulated vehiclesMechanical coupling between prime movers and semitrailersInterchangeability requirementsDedicated vehicle combinations AS 2809.12008 Road tank vehicles for dangerous goodsGeneral requirements for all road tank vehicles AS 2809.22008 Road tank vehicles for dangerous goodsRoad tank vehicles for flammable liquids AS 2809.32008 Road tank vehicles for dangerous goodsRoad tank vehicles for compressed liquefied gases AS 2809.42001 Road tank vehicles for dangerous goodsTankers for toxic and corrosive cargoes AS 2809.52001 Road tank vehicles for dangerous goodsTankers for bitumen-based products AS 2809.62001 Road tank vehicles for dangerous goodsTankers for cryogenic liquids AS 3819.11998 Heavy duty towing components70 mm and 110 mm diameter towballs for heavy duty couplings AS 3819.21998 Heavy duty towing componentsHeavy duty coupling bodies for 70 mm and 110 mm towballs AS/NZS 4968.1:2003 Heavy-road vehiclesMechanical coupling between articulated vehicle combinationsDesign criteria and selection requirements for fifth wheel, kingpin and associated equipment AS/NZS 4968.2:2003 Heavy-road vehiclesMechanical coupling between articulated vehicle combinationsTesting and installation of fifth wheel and associated equipment AS/NZS 4968.3:2003 Heavy-road vehiclesMechanical coupling between articulated vehicle combinationsKingpins and associated equipment COMPANY ORGANIZATION AND MANAGEMENT AS/NZS 4360 COMPANION SET:2008 AS/NZS 4360 Companion Set AS 50372005 Knowledge managementa guide HB 1852004 Human ResourcesGuidelines on Emerging Good Practice HB 1892004 Knowledge Management Terminology and ReadingsAn Australian Guide HB 2992008 Workforce Planning HB 323 Set2007 Employment Screening Set HB 3252008 Assuring probity in decision-making MP 532004 Personal financial planningPart 1: Definitions, processes and practices; Part 2: Requirements for competence of a Personal Financial Planner; Part 3: Ethics and experience Commercial function see Trade. Commercial function. Marketing Company organization and management in general AS 38062006 Compliance programs AS/NZS 3931:1998 Risk analysis of technological systems Application guide AS 40091992 Software reviews and audits AS 41832007 Value Management AS/NZS 4360/3806 Set Risk PLUS compliance Set AS/NZS 4360 SET Risk Management Set AS/NZS 4360:2004 Risk management AS/NZS 4360 COMPANION SET:2008 AS/NZS 4360 Companion Set AS/NZS 4581:1999 Management system integrationGuidance to business, government and community organizations AS/NZS 4801:2001 Occupational health and safety management systemsSpecification with guidance for use AS/NZS 4810.1:2000 Medical devicesRisk management Application of risk analysis AS 50372005 Knowledge managementa guide AS 50622006 Fire protection for mobile and transportable equipment AS 8000 Premium (Set)2004 Premium Corporate Governance Set AS 80002003 (Set Includes 8000, 8001, 8002, 8003, 8004) Corporate governance standards Set AS 8000 CD2006 Corporate Governance CD AS 80002003 Corporate governanceGood governance principles AS 80012008 Fraud and corruption control AS 80022003 Corporate governanceOrganizational codes of conduct AS 80032003 Corporate governanceCorporate social responsibility AS 80042003 Corporate governanceWhistleblower protection programs for entities
302
SUBJECT INDEX
HB 2922006 A practitioners guide to business continuity management HB 2932006 Executive guide to business continuity management HB 294:2006 National Post-Border Weed Risk Management Protocol HB 296:2007 Legal risk management HB 3162006 Interoperability infrastructure governance requirements HB 3242008 Lexicon of Key Terms used in Security HB 3252008 Assuring probity in decision-making HB 4022004 Business Planning HB 4032004 Best Practice Board Reporting HB 4052004 Disclosure and Transparency Frameworks HB 4072006 Corporate governance for small business HB 4082006 Corporate governance culture HB 436:2004 (Guidelines to AS/NZS 4360:2004) Risk Management Guidelines Companion to AS/NZS 4360:2004 MP 781999 Manual for the assessment of risks of plumbing products MP 912000 Dynamic approaches to healthcare risk management ISO 9001 COMPANION SET2008 ISO 9001 Companion Set Logistics see Purchasing. Procurement. Logistics Management of human resources AS 27082001 Keyboarding speed tests (formerly known as 'Typing speed tests') AS 2815.12008 Training and certification of occupational divers Occupational SCUBA diverStandard AS 2815.21992 Training and certification of occupational divers Air diving to 30 m AS 2815.31992 Training and certification of occupational divers Air diving to 50 m AS 2815.41992 Training and certification of occupational divers Bell diving AS 2815.52006 Training and certification of occupational divers Dive supervisor AS 29072001 Shorthand speed tests AS 2987 to 29881987 General conditions of contract for the supply of equipment with or without installation AS 35491989 Production typing tests AS 36692006 Non-destructive testingQualification and approval of personnelAerospace AS 39982006 Non-destructive testingQualification and certification of personnel AS 4005 (Set) Recreational Diving Set AS 4005.1 (Set) Recreational Diving Supplementary Set AS 4005.12000 Training and certification of recreational divers Minimum entry-level SCUBA diving AS 4005.1 Supplement 12000 Training and certification of recreational diversMinimum entry-level SCUBA divingMedical form for prospective recreational SCUBA divers AS 4005.1 Supplement 22000 Training and certification of recreational diversMinimum entry-level SCUBA divingStatement of health for recreational diving AS 4005.22000 Training and certification of recreational divers Recreational SCUBA dive supervisor AS 4005.32000 Training and certification of recreational divers Assistant SCUBA instructor AS 4005.42000 Training and certification of recreational divers SCUBA instructor AS 4005.52000 Training and certification of recreational divers SCUBA instructor trainer AS 41211994 Code of ethics and procedures for the selection of consultants AS 41222000 General conditions of contract for engagement of consultants AS 41222000 (Reusable PDF) General conditions of contract for engagement of consultants AS/NZS 4272:2001 Shorthand reporters' tests AS/NZS 4481:1997 Pressure equipmentCompetencies of inspectors AS 46352004 Non-destructive testingQualification of personnel for limited applications of non-destructive testing AS/NZS 4761.1:2008 Competencies for working with electrical equipment for hazardous areas (EEHA)Competency Standards
AS/NZS 4761.2:2008 Competencies for working with electrical equipment for hazardous areas (EEHA)Guide to assessing competency AS 48112006 Employment screening AS 50372005 Knowledge managementa guide AS ISO 100152006 Quality managementGuidelines for training (ISO 10015:1999, MOD) AS ISO 100192005 Guidelines for the selection of quality management system consultants and use of their services HB 1852004 Human ResourcesGuidelines on Emerging Good Practice HB 1892004 Knowledge Management Terminology and ReadingsAn Australian Guide HB 256:2007 Metadata usage in Australian and New Zealand education and training HB 2992008 Workforce Planning HB 3222007 Reference Checking in the Financial Services Industry HB 323 Set2007 Employment Screening Set HB 3232007 Employment screening handbook TR 48872008 Call centre standards scoping study CS FP 0011995 Fire Emergency Response CS FP 0021995 Fire ProtectionPortable Equipment Service Marketing see Trade. Commercial function. Marketing Other standards related to company organization and management AS ISO/IEC 20000 Set2007 Information technology Service Set AS ISO/IEC 20000.12007 Information technologyService managementSpecification AS ISO/IEC 20000.22007 Information technologyService managementCode of practice HB 3252008 Assuring probity in decision-making Procurement see Purchasing. Procurement. Logistics Production management see Production. Production management Production. Production management AS 50902003 Work process analysis for recordkeeping MP 942003 Product numbering standards for electronic health supply chains Purchasing. Procurement. Logistics AS 29871987 General conditions of contract for the supply of equipment with or without installation AS 2987/A1987 Annexure to the Australian Standard for conditions of contract for supply and erection of equipment AS 2987/B1987 Annexure to the Australian Standard for conditions of contract for supply and erection of equipment AS 2987 to 29881987 General conditions of contract for the supply of equipment with or without installation AS 2987 to 29881987 (Reusable PDF) General conditions of contract for the supply of equipment with or without installation AS 29881987 Form of formal instrument of agreement AS/NZS 3551:2004 Technical management programs for medical devices AS 41201994 Code of tendering AS 49102002 General conditions of contract for the supply of equipment with installation AS 49102002 (Reusable PDF) General conditions of contract for the supply of equipment with installation AS/NZS 4911:2003 General conditions of contract for the supply of equipment without installation AS/NZS 4911:2003 (Reusable PDF) General conditions of contract for the supply of equipment without installation AS 49122002 General conditions of contract for the periodic supply of goods AS 49122002 (Reusable PDF) General conditions of contract for the periodic supply of goods AS 49502006 Form of formal instrument of agreement AS 49502006 (Reusable PDF) Form of formal instrument of agreement Research and development AS 35951990 Energy management programsGuidelines for financial evaluation of a project AS 35961992 Energy management programsGuidelines for definition and analysis of energy and cost savings AS/NZS 3598:2000 Energy audits AS 41832007 Value Management
303
SUBJECT INDEX
COMPRESSORS AND PNEUMATIC MACHINES AS 2221.11979 Methods for measurements of airborne sound emitted by compressor units including primemovers and by pneumatic tools and machinesEngineering method for measurement of airborne sound emitted by compressor/primemover units intended for outdoor use AS/NZS 3350.2.34:2001 Safety of household and similar electrical appliancesParticular requirementsMotor-compressors AS/NZS 3350.2.79:2001 Safety of household and similar electrical appliances- Particular requirements for high pressure cleaners and steam cleaners, for industrial and commercial use (IEC 60335-2-79:1995, MOD) AS/NZS 4233.1:1999 High pressure water (hydro) jetting systems Guidelines for safe operation and maintenance AS/NZS 4233.2:1999 High pressure water (hydro) jetting systems Construction and performance AS 42971995 Underground miningStationary air compressors AS 46372006 Measurement of pump displacement and free air delivery of a reciprocating air compressor package AS/NZS 60335.2.34:2003 Household and similar electrical appliances Safety- Particular requirments for motor-compressors AS/NZS 60335.2.79:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for high pressure cleaners and steam cleaners, for industrial and commercial use AS/NZS 60335.2.87:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for electric animal-stunning equipment COMPUTER GRAPHICS AS 1189.131987 Data processingVocabularyComputer graphics AS 3643.11989 Computer graphicsInitial graphics exchange specification (IGES) for digital exchange of product definition dataGeneral AS 3643.21992 Computer graphicsInitial graphics exchange specification (IGES) for digital exchange of product definition dataSubset of AS 3643.1Two-dimensional drawings for architectural, engineering and construction (AEC) industries AS 36561989 Computer graphicsGraphical Kernel System for three dimensions (GKS-3D) functional description AS 3794.11991 Computer graphicsProgrammer's Hierarchical Interactive Graphics System (PHIGS) language bindingsFORTRAN AS 3794.31991 Computer graphicsProgrammer's Hierarchical Interactive Graphics System (PHIGS) language bindingsAda AS/NZS 14478.1:2000 Information technologyComputer graphics and image processingPresentation environment for multimedia objects Fundamentals of presentation environment for multimedia objects AS/NZS 14478.2:2000 Information technologyComputer graphics and image processingPresentation environment for multimedia objects Foundation component AS/NZS 14478.3:2000 Information technologyComputer graphics and image processingPresentation environment for multimedia objects Multimedia systems services AS/NZS 14478.4:2000 Information technologyComputer graphics and image processingPresentation environment for multimedia objects Modelling, rendering and interaction component CONSTRUCTION EQUIPMENT AS/NZS 1576.1:1995 ScaffoldingGeneral requirements AS 1576.21991 ScaffoldingCouplers and accessories AS/NZS 1576.3:1995 ScaffoldingPrefabricated and tube-and-coupler scaffolding AS 1576.41991 ScaffoldingSuspended scaffolding AS/NZS 1576.5:1995 ScaffoldingPrefabricated splitheads and trestles AS/NZS 1576.6:2000 ScaffoldingMetal tube-and-coupler scaffolding Deemed to comply with AS/NZS 1576.3 AS 15771993 Scaffold planks AS 39901993 Mechanical equipmentSteelwork AS/NZS 4576:1995 Guidelines for scaffolding CONSTRUCTION INDUSTRY CD 012 OH&S in Construction CD-ROM Construction industry in general AS/NZS 1388:1994 Guidelines for technical information for building and construction products HB 231992 TACT, Thesaurus of Australian construction terms HB 241992 Symbols and abbreviations for building and construction HB 502004 Glossary of building terms CIDA 011993 Value of Overseas Business Activity CIDA 041993 Model Projects and Enterprises
AS 47522004 Market and social research AS 48172006 Project performance measurement using Earned Value AS 49152002 Project managementGeneral conditions AS 49152002 (Reusable PDF) Project managementGeneral conditions AS 49162002 Construction managementGeneral conditions AS 49162002 (Reusable PDF) Construction management General conditions AS 50372005 Knowledge managementa guide AS ISO 202522007 Market, opinion and social research Vocabulary and service requirements (ISO 20252:2006, MOD) AS IEC 611602008 Design review HB 1892004 Knowledge Management Terminology and ReadingsAn Australian Guide HB 3252008 Assuring probity in decision-making Trade. Commercial function. Marketing MP 932005 2005 Australian Design Awards Yearbook MP 932004 2004 Australian Design Awards Yearbook MP 932003 2003 Australian Design Awards Yearbook MP 932002 2002 Australian Design Awards Yearbook MP 932001 2001 Australian Design Awards Yearbook COMPONENTS AND ACCESSORIES FOR TELECOMMUNICATIONS EQUIPMENT Aerials AS 1417.11987 Receiving antennas for radio and television in the frequency range 30 MHz to 1 GHzConstruction and installation AS 1417.21991 Receiving antennas for radio and television in the frequency range 30 MHz to 1 GHzPerformance Coaxial cables. Waveguides AS/NZS 1367:2007 Coaxial cable and optical fibre systems for the RF distribution of analog and digital television and sound signals in single and multiple dwelling installations AS 1852.7261983 International electrotechnical vocabulary Transmission lines and waveguides AS/NZS IEC 61935.1:2006 Testing of balanced communication cabling in accordance with ISO/IEC 11801Installed cabling AS/NZS IEC 61935.2:2006 Testing of balanced communication cabling in accordance with ISO/IEC 11801Patch cords and work area cords Components and accessories in general ACA TS 0081997 Requirements for Authorised Cabling Products AS/ACIF S008:2006 Requirements for customer cabling products Waveguides see Coaxial cables. Waveguides COMPONENTS FOR ELECTRICAL EQUIPMENT Components for electrical equipment in general AS 1939 Supplement 11990 Degrees of protection provided by enclosures for electrical equipment (IP Code)Wallchart 1 (Supplement 1 to AS 19391990) AS 1939 Supplement 21990 Degrees of protection provided by enclosures for electrical equipment (IP Code)Wallchart 2 (Supplement 2 to AS 19391990) AS 605292004 Degrees of protection provided by enclosures (IP Code) Electric and electromechanical components AS 37661990 Mechanical fittings for low voltage aerial bundled cables AS/NZS 3947.4.3:2000 Low-voltage switchgear and controlgear Contactors and motor-startersA.C. semiconductor controllers and contactors for non-motor loads AS/NZS 3947.5.5:2000 Low-voltage switchgear and controlgear Control circuit devices and switching elementsElectrical emergency stop device with mechanical latching function AS/NZS 3947.5.6:2000 Low-voltage switchgear and controlgear Control circuit devices and switching elementsD.C.interface for proximity sensors and switching amplifiers (NAMUR) AS 604702001 High-voltage alternating current contactors and contactor-based motor-starters AS 60947.4.12004 Low-voltage switchgear and controlgear Contactors and motor-startersElectromechanical contactors and motor-starters AS 60947.5.12004 Low-voltage switchgear and controlgear Control circuit devices and switching elements Electromechanical control circuit devices
304
SUBJECT INDEX
CIDA 051993 Creating Productive Partnerships: A Win-Win Guide to Enterprise Bargaining CIDA 071994 Constructing the Norm CIDA 081994 Security of Payment (Final Report) CIDA 091994 Building Best Practice in the Construction Industry Overview for Clients, Consulants and Contractors CIDA 101994 Construction Industry Project Initiation Guide for Project Sponsors, Clients and Owners CIDA 111994 Transforming Construction: The Total Project Approach CIDA 121995 Breaking the NormLanguage, literacy and numeracy skills in the building industry CIDA 131995 Breaking the NormAboriginal and Torres Strait Islanders in the building industry CIDA 141995 Breaking the NormWorkers rehabilitated after injury in the building industry CIDA 151995 Breaking the Norm: Women in the building trades CIDA 161995 Breaking the Norm: Women in the building professions CIDA 171995 The Australian Construction IndustryPreQualification Criteria for Smaller Projects CIDA 191995 The Australian Construction IndustryPreQualification Criteria for Subcontractors CIDA 201995 The Australian Construction IndustryPreQualification Criteria for Consultants CIDA 211995 Measuring Up or Muddling Through: Best Practice in the Australian Non-Residential Construction Industry CIDA 221995 In PrincipleConstruction Industry Reform 1991 to 1995 Contractual aspects AS 2124/A1992 General conditions of contract (AS 21241992) Annexure Part A AS 2124/A1986 Annexure Part A AS 2124/B1992 General conditions of contract (AS 21241992) Annexure Part B AS 2124/B1986 Annexure Part B AS 2124, 2125, 21271992 General conditions of contract AS 2124, 2125, 21271992 (Reusable PDF) General conditions of contract AS 2124, 2125, 21271986 General conditions of contract AS 2124, 2125, 21271986 (Reusable PDF) General conditions of contract AS Doc 2124N1992 Notes on the changes in the General conditions of contract 4th edition (AS 21241992) as compared with the 3rd edition (AS 21241986) AS 2160.11998 Contract for the supply and construction of a swimming pool or spaConcrete swimming pool or spa (no carbon copy) AS 2160.11998 (Reusable PDF) Contract for the supply and construction of a swimming pool or spaConcrete swimming pool or spa (no carbon copy) AS 2160.1/C1998 Contract for the supply and construction of a swimming pool or spaConcrete swimming pool or spa (with carbon copy) AS 25451993 Subcontract conditions AS 25451993 (Reusable PDF) Subcontract conditions AS 25451987 Subcontract conditions AS 2545/A1993 Subcontract conditions (AS 25451993) Annexure Part A AS 2545/A1987 Subcontract conditionsAnnexure to AS 2545 AS 2545/B1993 Subcontract conditions (AS 25451993) Annexure Part B AS 2545/B1987 Subcontract conditionsAnnexure to AS 2545 including certificate of substantial completion form of formal instrument of agreement AS 29871987 General conditions of contract for the supply of equipment with or without installation AS 2987/A1987 Annexure to the Australian Standard for conditions of contract for supply and erection of equipment AS 2987/B1987 Annexure to the Australian Standard for conditions of contract for supply and erection of equipment AS 2987 to 29881987 General conditions of contract for the supply of equipment with or without installation AS 2987 to 29881987 (Reusable PDF) General conditions of contract for the supply of equipment with or without installation AS 29881987 Form of formal instrument of agreement
CONSTRUCTION INDUSTRY
AS 4000 Set2006 General conditions of contract Set AS 40001997 General conditions of contract AS 40001997 (Reusable PDF) General conditions of contract AS 4000/A1997 General conditions of contract (AS 40001997) Annexure Part A AS 4000/B1997 General conditions of contract (AS 40001997) Annexure Part B AS 41201994 Code of tendering AS 41222000 General conditions of contract for engagement of consultants AS 41222000 (Reusable PDF) General conditions of contract for engagement of consultants AS 43001995 General conditions of contract for design and construct AS 43001995 (Reusable PDF) General conditions of contract for design and construct AS 4300 Supplement 11995 General conditions of contract for design and constructAnnexure Part A (Supplement to AS 4300 1995) AS 4300 Supplement 21995 General conditions of contract for design and constructAnnexure Part B (Supplement to AS 4300 1995) AS 4300 Supplement 31995 General conditions of contract for design and constructAnnexure Part C (Supplement to AS 4300 1995) AS 4300 Supplement 41995 General conditions of contract for design and constructAnnexure Part D (Supplement to AS 4300 1995) AS 4300 Supplement 51995 General conditions of contract for design and constructAnnexure Part E (Supplement to AS 4300 1995) AS 43011995 General conditions of tendering and tender form for design and construct contract AS 43011995 (Reusable PDF) General conditions of tendering and tender form for design and construct contract AS 4301 Supplement 11995 General conditions of tendering and tender form for design and construct contractPad of forms (Supplement to AS 43011995) AS 43021995 Form of formal instrument of agreement for design and construct contract AS 43021995 (Reusable PDF) Form of formal instrument of agreement for design and construct contract AS 4302 Supplement 11995 Form of formal instrument of agreement for design and construct contractPad of forms (Supplement to AS 43021995) AS 43031995 General conditions of subcontract for design and construct AS 43031995 (Reusable PDF) General conditions of subcontract for design and construct AS 43051996 Minor works contract conditions AS 43051996 (Reusable PDF) Minor works contract conditions AS 49011998 Subcontract conditions AS 49011998 (Reusable PDF) Subcontract conditions AS 49022000 General conditions of contract for design and construct AS 49022000 (Reusable PDF) General conditions of contract for design and construct AS 49032000 General conditions of subcontract for design and construct AS 49032000 (Reusable PDF) General conditions of subcontract for design and construct AS 49052002 Minor works contract conditions (Superintendent administered) AS 49052002 (Reusable PDF) Minor works contract conditions (Superintendent administered) AS 49062002 Minor works contract conditions (Principal administered) AS 49062002 (Reusable PDF) Minor works contract conditions (Principal administered) AS 49102002 General conditions of contract for the supply of equipment with installation AS 49102002 (Reusable PDF) General conditions of contract for the supply of equipment with installation AS/NZS 4911:2003 General conditions of contract for the supply of equipment without installation AS/NZS 4911:2003 (Reusable PDF) General conditions of contract for the supply of equipment without installation
305
CONSTRUCTION MATERIALS
SUBJECT INDEX
HB 54 Supplement 31994 Subcontract conditions (AS 2545 1993)User guideSubcontractor's set of proforma notices (Supplement to SAA HB 541994) HB 571994 User's manual for lump sum contract based on AS 21241992 HB 1402000 Administration manual for AS 40001997 General conditions of contract HB 2602003 Hospital acquired infectionsEngineering down the risk HB 296:2007 Legal risk management MP 651992 Lump sum contract for building works with administration by proprietor (RAIA ABP-11992) CIDA 021993 Competitive International ContractingThe Determinants of Success NPWC31981 NPWC3: General conditions of contract Other aspects MP 842000 Evolution Of Australian Standards for structural steel Technical aspects AS 11811982 Method of measurement of civil engineering works and associated building works AS/NZS 3584.2:2008 Diesel engine systems for underground coal minesExplosion protected AS 3854.11990 Performance standards in buildingContents and presentation AS 3854.21990 Performance standards in buildingPrinciples for their preparation and factors to be considered HB 312002 Handbook of building construction tolerancesExtracts from building products and structural Standards HB 471993 Dimensioning and tolerancing to AS 1100.1011992 and AS 1100.2011992 HB 591994 ErgonomicsThe human factorA practical approach to work systems design CONSTRUCTION MATERIALS HB 1552002 Guide to the use of recycled concrete and masonry materials Binders. Sealing materials AS 37991998 Liquid membrane-forming curing compounds for concrete AS/NZS 4548.1:1999 Guide to long-life coatings for concrete and masonryWall coatingsLatex extensible AS/NZS 4548.2:1999 Guide for long-life coatings for concrete and masonryLatex finish coatingsHigh-build, low profile AS/NZS 4548.3:1999 Guide to long-life coatings for concrete and masonryLatexTextured coatingsNon-aggregate AS/NZS 4548.4:1999 Guide to long-life coatings for concrete and masonryLatexTextured coatingsAggregate filled AS/NZS 4548.5:1999 Guide to long-life coatings for concrete and masonryGuidelines to methods of test AS CA551970 Code of recommended practice for the design and installation of bituminous fabric roofing Cement. Gypsum. Lime. Mortar AS 13162003 Masonry cement AS 1672.11997 Limes and limestonesLimes for building AS 23491991 Method of sampling portland and blended cements AS/NZS 2350.0:1999 Methods of testing portland and blended cementsGeneral introduction and list of methods AS/NZS 2350.1:2006 Methods of testing portland, blended and masonry cementsSampling AS 2350.22006 Methods of testing portland, blended and masonry cementsChemical composition AS 2350.21991 Methods of testing portland and blended cementsChemical composition of portland cement AS/NZS 2350.3:2006 Methods of testing portland, blended and masonry cementsNormal consistency AS/NZS 2350.3:1999 Methods of testing portland and blended cementsNormal consistency of portland and blended cements AS/NZS 2350.4:2006 Methods of testing portland, blended and masonry cementsSetting time AS/NZS 2350.4:1999 Methods of testing portland and blended cementsSetting time of portland and blended cements AS/NZS 2350.5:2006 Methods of testing portland, blended and masonry cementsDetermination of soundness AS/NZS 2350.5:1999 Methods of testing portland and blended cementsDetermination of soundness of portland and blended cements
AS 49122002 General conditions of contract for the periodic supply of goods AS 49122002 (Reusable PDF) General conditions of contract for the periodic supply of goods AS 49162002 Construction managementGeneral conditions AS 49162002 (Reusable PDF) Construction management General conditions AS 49172003 Construction management trade contractGeneral conditions AS 49172003 (Reusable PDF) Construction management trade contractGeneral conditions AS 49192003 General conditions of contract for the provision of asset maintenance and services (Superintendent's version) AS 49192003 (Reusable PDF) General conditions of contract for the provision of asset maintenance and services (Superintendent's version) AS 49202003 General conditions of contract for the provision of asset maintenance and services (Principal's version) AS 49202003 (Reusable PDF) General conditions of contract for the provision of asset maintenance and services (Principal's version) AS 49212003 General conditions of contract for the provision of asset maintenance and services (Short version) AS 49212003 (Reusable PDF) General conditions of contract for the provision of asset maintenance and services (Short version) AS 49492001 Work order AS 49492001 (Reusable PDF) Work order AS 49502006 Form of formal instrument of agreement AS 49502006 (Reusable PDF) Form of formal instrument of agreement LEGAL RISK SET2007 Legal Risk Management Set HB 421992 General conditions of contract (AS 21241992)User guide HB 42 Supplement 11993 General conditions of contract (AS 21241992)User guideContractor's set of proforma notices (Supplement to SAA HB421992) HB 42 Supplement 21993 General conditions of contract (AS 21241992)User guidePrincipal's set of proforma notices (Supplement to SAA HB421992) HB 42 Supplement 31993 General conditions of contract (AS 21241992)User guideSuperintendent's set of proforma notices (Supplement to SAA HB421992) HB 42 Supplement 41993 General conditions of contract (AS 21241992)User guideNotice of ambiguity or discrepancy in the contract documentsProforma notice (Supplement to SAA HB421992) HB 42 Supplement 51993 General conditions of contract (AS 21241992)User guideContractor's notice of delayProforma notice (Supplement to SAA HB421992) HB 42 Supplement 61993 General conditions of contract (AS 21241992)User guideContractor's notice of delay and claim for extension of time (days stated)Proforma notice (Supplement to SAA HB421992) HB 42 Supplement 71993 General conditions of contract (AS 21241992)User guideContractor's claim for extension of time (days stated)Proforma notice (Supplement to SAA HB42 1992) HB 42 Supplement 81993 General conditions of contract (AS 21241992)User guideSuperintendent's grant of extension of timeProforma notice (Supplement to SAA HB421992) HB 42 Supplement 91993 General conditions of contract (AS 21241992)User guideRequest to price proposed variation Proforma notice (Supplement to SAA HB421992) HB 42 Supplement 101993 General conditions of contract (AS 21241992)User guideRequest for variation quotation Proforma notice (Supplement to SAA HB421992) HB 42 Supplement 111993 General conditions of contract (AS 21241992)User guidePayment certificateProforma notice (Supplement to SAA HB421992) HB 541994 Subcontract conditions (AS 25451993)User guide HB 54 Supplement 11994 Subcontract conditions (AS 2545 1993)User guideMain contractor's set of proforma notices (Supplement to SAA HB 541994) HB 54 Supplement 21994 Subcontract conditions (AS 2545 1993)User guideMain contractor's representative's set of proforma notices (Supplement to SAA HB 541994)
306
SUBJECT INDEX
AS 2350.72006 Methods of testing portland, blended and masonry cementsDetermination of temperature rise during hydration of portland and blended cements AS 2350.71997 Methods of testing portland and blended cementsDetermination of temperature rises during hydration of portland and blended cements AS/NZS 2350.8:2006 Methods of testing portland, blended and masonry cementsFineness index by air permeability method AS/NZS 2350.8:1999 Methods of testing portland and blended cementFineness index of portland cement by air permeability method AS 2350.92006 Methods of testing portland, blended and masonry cementsDetermination of residue on the 45 g sieve AS 2350.91997 Methods of testing portland and blended cementsDetermination of residue on the 45 g sieve AS 2350.102006 Methods of testing portland, blended and masonry cementsAcid soluble calcium oxide content of blended cement AS 2350.101991 Methods of testing portland and blended cementsCalcium oxide content of blended cement AS/NZS 2350.11:2006 Methods of testing portland, blended and masonry cementsCompressive strength AS/NZS 2350.11:2001 Methods of testing portland, blended and masonry cementsCompressive strength AS/NZS 2350.11:1997 Methods of testing portland and blended cementsCompressive strength of portland and blended cement AS 2350.122006 Methods of testing portland, blended and masonry cementsPreparation of a standard mortar and moulding of specimens AS 2350.121995 Methods of testing portland and blended cementsPreparation of a standard mortar and moulding of specimens AS 2350.132006 Methods of testing portland, blended and masonry cementsDetermination of drying shrinkage of cement mortars AS 2350.131995 Methods of testing portland and blended cementsDetermination of drying shrinkage of portland and blended cement mortars AS 2350.142006 Methods of testing portland, blended and masonry cementsLength change of cement mortars exposed to sulfate solution AS 2350.141996 Methods of testing portland and blended cementsLength change of portland and blended cement mortars exposed to a sulfate solution AS 2350.151995 Methods of testing portland and blended cementsWater-soluble chromate content of portland cement AS/NZS 2350.16:2006 Methods of testing portland, blended and masonry cementsDetermination of air content of masonry cement AS/NZS 2350.16:2001 Methods of testing portland, blended and masonry cementsDetermination of air content of masonry cement AS/NZS 2350.17:2006 Methods of testing portland, blended and masonry cementsDetermination of soundness of masonry cement AS/NZS 2350.17:2001 Methods of testing portland, blended and masonry cementsDetermination of soundness of masonry cements AS/NZS 2350.18:2006 Methods of testing portland, blended and masonry cementsDetermination of water retention of masonry cement AS/NZS 2350.18:2001 Methods of testing portland, blended and masonry cementsDetermination of water retention of masonry cement AS/NZS 2588:1998 Gypsum plasterboard AS/NZS 2589:2007 Gypsum liningsApplication and finishing AS/NZS 2589.1:1997 Gypsum linings in residential and light commercial constructionApplication and finishingGypsum plasterboard AS/NZS 2589.2:1997 Gypsum linings in residential and light commercial constructionApplication and finishingFibre reinforced gypsum plaster AS 27012001 Methods of sampling and testing mortar for masonry constructions AS 3582.11998 Supplementary cementitious materials for use with portland and blended cementFly ash
CONSTRUCTION MATERIALS
AS 3582.22001 Supplementary cementitious materials for use with portland and blended cementSlagGround granulated iron blast-furnace AS 3582.21991 Supplementary cementitious materials for use with portland cementSlagGround granulated iron blastfurnace AS/NZS 3582.3:2002 Supplementary cementitious materials for use with portland and blended cementAmorphous silica AS 3582.31994 Supplementary cementitious materials for use with portland cementSilica fume AS 3583.11998 Methods of test for supplementary cementitious materials for use with portland and blended cement Determination of fineness by the 45 g sieve AS 3583.21991 Methods of test for supplementary cementitious materials for use with portland cementDetermination of moisture content AS 3583.31991 Methods of test for supplementary cementitious materials for use with portland cementDetermination of loss on ignition AS 3583.41991 Methods of test for supplementary cementitious materials for use with portland cementDetermination of autoclave expansion AS 3583.51991 Methods of test for supplementary cementitious materials for use with portland cementDetermination of relative density AS 3583.61995 Methods of test for supplementary cementitious materials for use with portland cementDetermination of relative water requirement and relative strength AS 3583.71991 Methods of test for supplementary cementitious materials for use with portland cementDetermination of sulfide sulfur content AS 3583.81991 Methods of test for supplementary cementitious materials for use with portland cementDetermination of sulfuric anhydride content AS 3583.91991 Methods of test for supplementary cementitious materials for use with portland cementDetermination of magnesia content AS 3583.101991 Methods of test for supplementary cementitious materials for use with portland cementDetermination of alumina and total iron content AS 3583.111991 Methods of test for supplementary cementitious materials for use with portland cementDetermination of manganese content AS 3583.121991 Methods of test for supplementary cementitious materials for use with portland cementDetermination of available alkali AS 3583.131991 Methods of test for supplementary cementitious materials for use with portland cementDetermination of chloride ion content AS 3583.141991 Methods of test for supplementary cementitious materials for use with portland cementDetermination of insoluble residue content AS 36481993 Specification and methods of test for packaged concrete mixes AS 39721997 Portland and blended cements AS 39741991 Evaluation of uniformity of cement strength from a single source AS 4489.01997 Test methods for limes and limestonesGeneral introduction and list of methods AS 4489.1.11997 Test methods for limes and limestonesSample preparationQuicklime and hydrated lime AS 4489.2.11997 Test methods for limes and limestones FinenessWet sieving AS 4489.3.11997 Test methods for limes and limestones SlakingDewar flask AS 4489.4.11997 Test methods for limes and limestones SoundnessPat AS 4489.4.21997 Test methods for limes and limestones SoundnessLe Chatelier AS 4489.4.31997 Test methods for limes and limestones SoundnessAutoclave AS 4489.5.11997 Test methods for limes and limestonees Chemical compositionQuicklime and hydrated lime AS 4489.6.11997 Test methods for limes and limestoneesLime indexAvailable lime AS 4489.7.11997 Test methods for limes and limestonesLoss on ignitionQuicklime, hydrated lime and limestone
307
CONSTRUCTION MATERIALS
SUBJECT INDEX
AS 1012.3.21998 Methods of testing concreteDetermination of properties related to the consistency of concreteCompacting factor test AS 1012.3.31998 Methods of testing concreteDetermination of properties related to the consistency of concreteVebe test AS 1012.3.41998 Methods of testing concreteDetermination of properties related to the consistency of concreteCompactibility index AS 1012.4.11999 Methods of testing concreteDetermination of air content of freshly mixed concreteMeasuring reduction in concrete volume with increased air pressure AS 1012.4.21999 Methods of testing concreteDetermination of air content of freshly mixed concreteMeasuring reduction in air pressure in chamber above concrete AS 1012.4.31999 Methods of testing concreteDetermination of air content of freshly mixed concreteMeasuring air volume when concrete dispersed in water AS 1012.51999 Methods of testing concreteDetermination of mass per unit volume of freshly mixed concrete AS 1012.61999 Methods of testing concreteMethod for the determination of bleeding of concrete AS 1012.8.12000 Methods of testing concreteMethod of making and curing concrete- Compression and indirect tensile test specimens AS 1012.8.22000 Methods of testing concreteMethod of making and curing concrete- Flexure test specimens AS 1012.91999 Methods of testing concreteDetermination of the compressive strength of concrete specimens AS 1012.102000 Methods of testing concreteDetermination of indirect tensile strength of concrete cylinders ('Brasil' or splitting test) AS 1012.112000 Methods of testing concreteDetermination of the modulus of rupture AS 1012.12.11998 Methods of testing concreteDetermination of mass per unit volume of hardened concreteRapid measuring method AS 1012.12.21998 Methods of testing concreteDetermination of mass per unit volume of hardened concreteWater displacement method AS 1012.131992 Methods of testing concreteDetermination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory AS 1012.141991 Methods of testing concreteMethod for securing and testing cores from hardened concrete for compressive strength AS 1012.161996 Methods of testing concreteDetermination of creep of concrete cylinders in compression AS 1012.171997 Methods of testing concreteDetermination of the static chord modulus of elasticity and Poisson's ratio of concrete specimens AS 1012.181996 Methods of testing concreteDetermination of setting time of fresh concrete, mortar and grout by penetration resistance AS 1012.19.12000 Methods of testing concreteAccelerated curing of concrete compression test specimensHot water method AS 1012.19.22000 Methods of testing concreteAccelerated curing of concrete compression test specimensWarm water method AS 1012.201992 Methods of testing concreteDetermination of chloride and sulfate in hardened concrete and concrete aggregates AS 1012.211999 Methods of testing concreteDetermination of water absorption and apparent volume of permeable voids in hardened concrete AS/NZS 1314:2003 Prestressing anchorages AS 13792007 Specification and supply of concrete AS 13791997 Specification and supply of concrete AS 1379 Supplement 12008 Specification and supply of concrete Commentary (Supplement 1 to AS 13792007) AS 1379 Supplement 11997 Specification and supply of concrete Commentary (Supplement to AS 13791997) AS 1478.12000 Chemical admixtures for concrete, mortar and groutAdmixtures for concrete AS 1478.22005 Chemical admixtures for concrete, mortar and groutMethods of sampling and testing admixtures for concrete, mortar and grout AS 1597.11974 Precast reinforced concrete box culvertsSmall culverts (not exceeding 1200 mm width and 900 mm depth)
AS 4489.8.11997 Test methods for limes and limestonesFree moistureConvection oven AS 4489.9.11997 Test methods for limes and limestonesSolid contentConvection oven AS 4489.10.11997 Test methods for limes and limestonesBulk densityQuicklime and hydrated lime Ceramic tiles AS 3958.12007 Ceramic tilesGuide to the installation of ceramic tiles AS 3958.11991 Ceramic tilesGuide to the installation of ceramic tiles AS 3958.21992 Ceramic tilesGuide to the selection of a ceramic tiling system AS 4459.11999 Methods of sampling and testing ceramic tiles Sampling and basis for acceptance AS 4459.21999 Methods of sampling and testing ceramic tiles Determination of dimensions and surface quality AS 4459.31999 Methods of sampling and testing ceramic tiles Determination of water absorption, apparent porosity, apparent relative density and bulk density AS 4459.41997 Methods of sampling and testing ceramic tiles Determination of modulus of rupture and breaking strength AS 4459.51999 Methods of sampling and testing ceramic tiles Determination of impact resistance by measurement of coefficient of restitution AS 4459.61999 Methods of sampling and testing ceramic tiles Determination of resistance to deep abrasion for unglazed tiles AS 4459.71999 Methods of sampling and testing ceramic tiles Determination of resistance to surface abrasion for glazed tiles AS 4459.81997 Methods of sampling and testing ceramic tiles Determination of linear thermal expansion AS 4459.91997 Methods of sampling and testing ceramic tiles Determination of resistance to thermal shock AS 4459.101999 Methods of sampling and testing ceramic tiles Determination of moisture expansion AS 4459.111997 Methods of sampling and testing ceramic tiles Determination of crazing resistance for glazed tiles AS 4459.121999 Methods of sampling and testing ceramic tiles Determination of frost resistance AS 4459.131999 Methods of sampling and testing ceramic tiles Determination of chemical resistance AS 4459.141999 Methods of sampling and testing ceramic tiles Determination of resistance to stains AS 4459.151999 Methods of sampling and testing ceramic tiles Determination of lead and cadmium given off by glazed tiles AS 4459.162005 Methods of sampling and testing ceramic tiles Determination of small colour differences (ISO10545-16:1999 MOD) AS/NZS 4586:2004 Slip resistance classification of new pedestrian surface materials AS 46622003 Ceramic tilesDefinitions, classification, characteristics and marking AS/NZS 4663:2004 Slip resistance measurement of existing pedestrian surfaces AS 4992.12006 Ceramic tilesGrouts and adhesivesTerms, definitions and specifications for adhesives AS 4992.1(Int)2003 Ceramic tiles: Products for installation Adhesive: Definitions and specifications AS 4992.22006 Ceramic tilesGrouts and adhesivesTest methods for adhesives (ISO 13007-2:2005, MOD) AS 4992.2(Int)2003 Ceramic tiles: Products for installation Adhesives: Test methods AS 4992.32004 Ceramic tiles: Products for installationGrouts: Definitions and specifications AS 4992.42004 Ceramic tiles: Products for installationGrouts: Test methods HB 197:1999 An introductory guide to the slip resistance of pedestrian surface materials Concrete and concrete products AS 1012.11993 Methods of testing concreteSampling of fresh concrete AS 1012.21994 Methods of testing concretePreparation of concrete mixes in the laboratory AS 1012.3.11998 Methods of testing concreteDetermination of properties related to the consistency of concreteSlump test
308
SUBJECT INDEX
AS 1597.21996 Precast reinforced concrete box culvertsLarge culverts (from 1500 mm span and up to and including 4200 mm span and 4200 mm height) AS 1597.2 Supplement 11997 Precast reinforced concrete box culvertsLarge culverts (from 1500 mm span and up to and including 4200 mm span and 4200 mm height)Commentary (Supplement to AS 1597.21996) AS 20492002 Roof tiles AS 20491992 Roof tiles AS 28762000 Concrete kerbs and channels (gutters)Manually or machine placed AS 36002001 Concrete structures AS 3600 Supplement 11994 Concrete structuresCommentary (Supplement to AS 36001994) AS 36101995 Formwork for concrete AS 3610 Supplement 11995 Formwork for concreteBlowhole and colour evaluation charts (Supplement to AS 36101995) AS 3610 Supplement 21996 Formwork for concreteCommentary (Supplement to AS 36101995) AS 37991998 Liquid membrane-forming curing compounds for concrete AS 38502003 Tilt-up concrete construction AS 41981994 Precast concrete access chambers for sewerage applications AS/NZS 4455:1997 Masonry units and segmental pavers AS/NZS 4455.1:2008 Masonry units, pavers, flags and segmental retaining wall unitsMasonry units HB 642002 Guide to concrete construction HB 671995 Concrete practice on building sites HB 712002 Reinforced concrete design in accordance with AS 36002001 HB 791996 Alkali Aggregate reactionGuidelines on Minimising the Risk of Damage to Concrete Structures in Australia HB 842006 Guide to Concrete Repair and Protection HB 1552002 Guide to the use of recycled concrete and masonry materials Construction materials in general HB 2.11998 Australian Standards for civil engineering students Materials and testing HB 2.22003 Australian Standards for civil engineering students Structural engineering Gypsum see Cement. Gypsum. Lime. Mortar Lime see Cement. Gypsum. Lime. Mortar Mineral materials and products AS 1141.01999 Methods for sampling and testing aggregatesList of methods AS 1141.11996 Methods for sampling and testing aggregates Definitions AS 1141.21999 Methods for sampling and testing aggregates Basic testing equipment AS 1141.3.11996 Methods for sampling and testing aggregates SamplingAggregates AS 1141.3.21996 Methods for sampling and testing aggregates SamplingRock spalls, boulders and drill core AS 1141.42000 Methods for sampling and testing aggregates Bulk density of aggregate AS 1141.52000 Methods for sampling and testing aggregates Particle density and water absorption of fine aggregate AS 1141.6.12000 Methods for sampling and testing aggregates Particle density and water absorption of coarse aggregate Weighing-in-water method AS 1141.6.21996 Methods for sampling and testing of aggregatesParticle density and water absorption of coarse aggregatePycnometer method AS 1141.71995 Methods for sampling and testing aggregates Apparent particle density of filler AS 1141.81995 Methods for sampling and testing aggregates Water-soluble fraction of filler AS 1141.111996 Methods for sampling and testing aggregates Particle size distribution by sieving AS 1141.11.22008 Methods for sampling and testing aggregates Particle size distribution for vision sizing systems AS 1141.121996 Methods for sampling and testing of aggregates Materials finer than 75 g in aggregates (by washing) AS 1141.132007 Methods for sampling and testing aggregates Material finer than 2 micrometer
CONSTRUCTION MATERIALS
AS 1141.142007 Methods for sampling and testing aggregates Particle shape, by proportional caliper AS 1141.151999 Methods for sampling and testing aggregates Flakiness index AS 1141.162007 Methods for sampling and testing aggregates Angularity number AS 1141.171995 Methods for sampling and testing aggregates Voids in dry compacted filler AS 1141.181996 Methods for sampling and testing aggregates Crushed particles in coarse aggregate derived from gravel AS 1141.191998 Methods for sampling and testing aggregates Fine particle size distribution in road materials by sieving and decantation AS 1141.20.12000 Methods for sampling and testing aggregates Average least dimensionDirect measurement (nominal size 10 mm and greater) AS 1141.20.22000 Methods for sampling and testing aggregates Average least dimensionDirect measurement (nominal sizes 5 mm and 7 mm) AS 1141.20.32000 Methods for sampling and testing aggregates Average least dimensionCalculation (nomograph) AS 1141.211997 Methods for sampling and testing aggregates Aggregate crushing value AS 1141.222008 Methods for sampling and testing aggregates Wet/dry strength variation AS 1141.231995 Methods for sampling and testing aggregates Los Angeles value AS 1141.241997 Methods for sampling and testing aggregates Aggregate soundnessEvaluation by exposure to sodium sulfate solution AS 1141.25.12003 Methods for sampling and testing aggregates Degradation factorSource rock AS 1141.25.22003 Methods for sampling and testing aggregates Degradation factorCoarse aggregate AS 1141.25.32003 Methods for sampling and testing aggregates Degradation factorFine aggregate AS 1141.262008 Methods for sampling and testing aggregates Secondary minerals content in igneous rocks AS 1141.271995 Methods for sampling and testing aggregates Resistance to wear by attrition AS 1141.281999 Methods for sampling and testing aggregates Ball mill value AS 1141.291999 Methods for sampling and testing aggregates Accelerated soundness index by reflux AS 1141.301996 Methods for sampling and testing of aggregates Coarse aggregate quality by visual comparison AS 1141.311997 Methods for sampling and testing aggregates Light particles AS 1141.322008 Methods for sampling and testing aggregates Weak particles (including clay lumps, soft and friable particles) in coarse aggregates AS 1141.331997 Methods for sampling and testing aggregates Clay and fine silt (settling method) AS 1141.342007 Methods for sampling and testing aggregates Organic impurities other than sugar AS 1141.352007 Methods for sampling and testing aggregates Sugar AS 1141.361997 Methods for sampling and testing aggregates Sulfur in metallurgical slag, crushed rock or other pavement materials AS 1141.372007 Methods for sampling and testing aggregates Iron unsoundness AS 1141.401999 Methods for sampling and testing aggregates Polished aggregate friction valueVertical road-wheel machine AS 1141.411999 Methods for sampling and testing aggregates Polished aggregate friction valueHorizontal bed machine AS 1141.421999 Methods for sampling and testing aggregates Pendulum friction test AS 1141.501998 Methods for sampling and testing aggregates Resistance to stripping of cover aggregates from binders AS 1141.522008 Methods for sampling and testing aggregates Unconfined cohesion of compacted pavement materials AS 1141.652008 Methods for sampling and testing aggregates Alkali aggregate reactivityQualitative petrological screening for potential alkali-silica reaction AS 2758.11998 Aggregates and rock for engineering purposes Concrete aggregates
309
CONSTRUCTION MATERIALS
SUBJECT INDEX
Mortar see Cement. Gypsum. Lime. Mortar Other construction materials AS/NZS 4389:1996 Safety mesh Products in fibre-reinforced cement AS/NZS 1562.2:1999 Design and installation of sheet roof and wall claddingCorrugated fibre-reinforced cement AS 16391990 The design and installation of corrugated fibrereinforced cement roofing and wall cladding AS/NZS 2908.1:2000 Cellulose-cement productsCorrugated sheets AS 2908.11992 Cellulose-cement productsCorrugated sheets AS/NZS 2908.2:2000 Cellulose-cement productsFlat sheet AS 2908.21992 Cellulose-cement productsFlat sheets Sealing materials see Binders. Sealing materials Terracotta building products AS 20492002 Roof tiles AS 20491992 Roof tiles AS 20502002 Installation of roof tiles AS 20501995 Installation of roof tiles AS 4046.02002 Methods of testing roof tilesIntroduction and list of methods AS 4046.12002 Methods of testing roof tilesDetermination of distortion AS 4046.22002 Methods of testing roof tilesDetermination of batten lugs and squareness AS 4046.32002 Methods of testing roof tilesDetermination of transverse strength AS 4046.42002 Methods of testing roof tilesDetermination of water absorption AS 4046.52002 Methods of testing roof tilesDetermination of permeability AS 4046.62002 Methods of testing roof tilesDetermination of resistance to freeze/thaw AS 4046.72002 Methods of testing roof tilesDetermination of resistance to salt attack AS 4046.82006 Methods of testing roof tilesAdhesive mechanical fastenersFlexible pointing AS 4046.92002 Methods of testing roof tilesDetermination of dynamic weather resistance AS 4133.52002 Methods of testing rocks for engineering purposesSampling of rock core AS/NZS 4455:1997 Masonry units and segmental pavers AS/NZS 4455.1:2008 Masonry units, pavers, flags and segmental retaining wall unitsMasonry units AS/NZS 4455.3:2008 Masonry units, pavers, flags and segmental retaining wall unitsSegmental retaining wall units AS/NZS 4456.0:2003 Masonry units and segmental pavers and flagsMethods of testGeneral introduction and list of methods AS/NZS 4456.1:2003 Masonry units and segmental pavers and flagsMethods of testSampling for test AS/NZS 4456.2:2003 Masonry units and segmental pavers and flagsMethods of testAssessment of mean and standard deviation AS/NZS 4456.3:2003 Masonry units and segmental pavers and flagsMethods of testDetermining dimensions AS/NZS 4456.4:2003 Masonry units and segmental pavers and flagsMethods of testDetermining compressive strength of masonry units AS/NZS 4456.5:2003 Masonry units and segmental pavers and flagsMethods of testDetermining the breaking load of segmental pavers and flags AS/NZS 4456.6:2003 Masonry units and segmental pavers and flagsMethods of testDetermining potential to effloresce AS/NZS 4456.7:2003 Masonry units and segmental pavers and flagsMethods of testDetermining core percentage and material thickness AS/NZS 4456.8:2003 Masonry units and segmental pavers and flagsMethods of testDetermining moisture content, dry density and ambient density AS/NZS 4456.9:2003 Masonry units and segmental pavers and flagsMethods of testDetermining abrasion resistance AS/NZS 4456.10:2003 Masonry units and segmental pavers and flagsMethods of testDetermining resistance to salt attack AS/NZS 4456.10:1997 Masonry units and segmental pavers Methods of testDetermining resistance to salt attack
AS 2758.21996 Aggregates and rock for engineering purposes Aggregate for sprayed bituminous surfacing AS 2758.42000 Aggregates and rock for engineering purposes Aggregate for gabion baskets and wire mattresses AS 2758.51996 Aggregates and rock for engineering purposes Asphalt aggregates AS 2758.62008 Aggregates and rock for engineering purposes Guidelines for the specification of armourstone AS 2758.71996 Aggregates and rock for engineering purposes Railway ballast AS 2864.12003 Methods for the analysis of rutileDetermination of titanium contentTitrimetric method AS 4133.02005 Methods of testing rocks for engineering purposesGeneral requirements and list of methods AS 4133.1.1.12005 Methods of testing rocks for engineering purposesRock moisture content testsDetermination of the moisture content of rockOven drying method (standard method) AS 4133.2.1.12005 Methods of testing rocks for engineering purposesRock porosity and density testsDetermination of rock porosity and dry densitySaturation and calliper techniques AS 4133.2.1.22005 Methods of testing rocks for engineering purposesRock porosity and density testsDetermination of rock porosity and dry densitySaturation and buoyancy techniques AS 4133.3.12005 Methods of testing rocks for engineering purposesRock swelling and slake durability testsDetermination of the swelling strain developed in an unconfined rock specimen AS 4133.3.22005 Methods of testing rocks for engineering purposesRock swelling and slake durability testsDetermination of the swelling strain for a radially confined specimen with axial surcharge AS 4133.3.32005 Methods of testing rocks for engineering purposesRock swelling and slake durability testsDetermination of the swelling pressure index under conditions of zero volume change AS 4133.3.42005 Methods of testing rocks for engineering purposesRock swelling and slake durability testsDetermination of the slake durability index of rock samples AS 4133.4.12007 Methods of testing rocks for engineering purposesRock strength testsDetermination of point load strength index AS 4133.4.11993 Methods of testing rocks for engineering purposesRock strength testsDetermination of point load strength index AS 4133.4.21993 Methods of testing rocks for engineering purposesRock strength testsDetermination of uniaxial compressive strength AS 4133.4.2.12007 Methods of testing rocks for engineering purposesRock strength testsDetermination of uniaxial compressive strength of 50 MPa and greater AS 4133.4.31993 Methods of testing rocks for engineering purposesRock strength testsDetermination of deformability of rock materials in uniaxial compression AS 42041994 Headstones and cemetery monuments AS/NZS 4455:1997 Masonry units and segmental pavers AS/NZS 4455.1:2008 Masonry units, pavers, flags and segmental retaining wall unitsMasonry units AS/NZS 4455.3:2008 Masonry units, pavers, flags and segmental retaining wall unitsSegmental retaining wall units AS/NZS 4456.10:1997 Masonry units and segmental pavers Methods of testDetermining resistance to salt attack AS 45971999 Installation of roof slates and shingles (Noninterlocking type) AS 5101.3.12008 Methods for preparation and testing of stabilized materialsLime or cement content of uncured stabilized pavement materials (EDTA method) AS 5101.3.22008 Methods for preparation and testing of stabilized materialsLime or cement content of stabilized pavement materials (EDTA method) AS 5101.42008 Methods for preparation and testing of stabilized materialsUnconfined compressive strength of compacted materials AS 5101.52008 Methods for preparation and testing of stabilized materialsAbsorption, swell and capillary rise of compacted materials AS CA551970 Code of recommended practice for the design and installation of bituminous fabric roofing HB 1952002 The Australian Earth Building Handbook CSIRO 5 Earth-wall construction
310
SUBJECT INDEX
AS/NZS 4456.11:2003 Masonry units and segmental pavers and flagsMethods of testDetermining coefficients of expansion AS/NZS 4456.12:2003 Masonry units and segmental pavers and flagsMethods of testDetermining coefficients of contraction AS/NZS 4456.13:2003 Masonry units and segmental pavers and flagsMethods of testDetermining pitting due to lime particles AS/NZS 4456.14:2003 Masonry units and segmental pavers and flagsMethods of testDetermining water absorption properties AS/NZS 4456.15:2003 Masonry units and segmental pavers and flagsMethods of testDetermining lateral modulus of rupture AS/NZS 4456.16:2003 Masonry units and segmental pavers and flagsMethods of testDetermining permeability to water AS/NZS 4456.17:2003 Masonry units and segmental pavers and flagsMethods of testDetermining initial rate of absorption (suction) AS/NZS 4456.18:2003 Masonry units and segmental pavers and flagsMethods of testDetermining tensile strength of masonry units and segmental pavers AS/NZS 4456.19:2003 Masonry units and segmental pavers and flagsMethods of testDetermination of bow AS 45971999 Installation of roof slates and shingles (Noninterlocking type) Thermal and sound insulating materials AS 1366.11992 Rigid cellular plastics sheets for thermal insulationRigid cellular polyurethane (RC/PUR) AS 1366.31992 Rigid cellular plastics sheets for thermal insulationRigid cellular polystyreneMoulded (RC/PSM) AS 1366.41989 Rigid cellular plastics sheets for thermal insulationRigid cellular polystyreneExtruded (RC/PS-E) AS 24621981 Cellulosic fibre thermal insulation AS 37421990 Mineral wool thermal insulationBatt and blanket AS 39991992 Thermal insulation of dwellingsBulk insulation Installation requirements AS 45081999 Thermal resistance of insulation for ductwork used in building airconditioning AS/NZS 4859.1:2002 Materials for the thermal insulation of buildingsGeneral criteria and technical provisions CONSTRUCTION TECHNOLOGY AS 24361981 Guide to noise control on construction, maintenance and demolition sites AS 26012001 Demolition of structures AS/NZS 3012:2003 Electrical installationsConstruction and demolition sites CONTINUOUS HANDLING EQUIPMENT Components for conveyors AS 13322000 Conveyor beltingTextile reinforced AS 13331994 Conveyor belting of elastomeric and steel cord construction AS 1334.11982 Methods of testing conveyor and elevator belting Determination of length of endless belting AS 1334.21982 Methods of testing conveyor and elevator belting Determination of thickness of belting and rubber covers across the width AS 1334.2A1984 Methods of testing conveyor and elevator beltingDetermination of thickness of cover using an optical magnifier AS 1334.31982 Methods of testing conveyor and elevator belting Determination of full thickness tensile strength and elongation of conveyor belting AS 1334.41982 Methods of testing conveyor and elevator belting Determination of troughability of conveyor belting AS 1334.71982 Methods of testing conveyor and elevator belting Determination of ply adhesion of conveyor belting AS 1334.81982 Methods of testing conveyor and elevator belting Determination of resistance to tear propagation and resistance of carcass to tearing AS 1334.91982 Methods of testing conveyor and elevator belting Determination of electrical resistance of conveyor belting AS 1334.101994 Methods of testing conveyor and elevator beltingDetermination of ignitability and flame propagation characteristics of conveyor belting AS 1334.111988 Methods of testing conveyor and elevator beltingDetermination of ignitability and maximum surface temperature of belting subjected to friction AS 1334.121996 Methods of testing conveyor and elevator beltingDetermination of combustion propagation characteristics of conveyor belting
CONSTRUCTION TECHNOLOGY
AS 35521988 Conveyor beltingGuide to splicing steel cord belting AS 40351992 Conveyor and elevator beltingGlossary of terms AS 4076.11992 Conveyor beltsDetermination of strength of mechanical fasteningsStatic test method AS 46062000 Fire resistant and antistatic requirements for conveyor belting used in underground coal mines Continuous handling equipment in general AS 4324.11995 Mobile equipment for continuous handling of bulk materialsGeneral requirements for the design of steel structures Conveyors AS 17552000 ConveyorsSafety requirements CONVERTERS see RECTIFIERS. CONVERTERS. STABILIZED POWER SUPPLY CORROSION OF METALS AS 20381977 Methods for detecting the susceptibility of austenitic stainless steels to intergranular corrosion AS 21361977 Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test AS 23092008 Durability of galvanized and electrogalvanized zinc coatings for the protection of steel in structural applicationsAtmospheric AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings AS 2662.11983 Corrosion inhibition (rust-proofing)Motor vehiclesProduct AS 2662.21988 Corrosion inhibition (rust-proofing)Motor vehicles Treatment of vehicles AS 2832.12004 Cathodic protection of metalsPipes and cables AS 2832.22003 Cathodic protection of metalsCompact buried structures AS 2832.32005 Cathodic protection of metalsFixed immersed structures AS 2832.42006 Cathodic protection of metalsInternal surfaces AS 2832.52008 Cathodic protection of metalsSteel in concrete structures AS/NZS 3750.19:2008 Paints for steel structuresMetal primerGeneral purpose AS 40362006 Corrosion of metalsDissimilar metals in contact in seawater AS 43122008 Atmospheric corrosivity zones in Australia AS 43522005 Tests for coating resistance to cathodic disbonding CRATES see CASES. BOXES. CRATES CUTTING TOOLS Abrasives AS 1788.11987 Abrasive wheelsDesign, construction, and safeguarding AS 1788.21987 Abrasive wheelsSelection, care, and use AS 45142006 Abrasive productsChecking the grit size of superabrasives AS 45152006 Superabrasive productsRotating grinding tools with diamond or cubic boron nitrideGeneral survey, designation and multilingual nomenclature AS/NZS 4516:1998 Abrasive productsDiamond or cubic boron nitride grinding wheelsDimensions AS 4517.12006 Blanks for superabrasive cutting-off wheels Manually guided cutting-off in building and civil engineering AS 4517.22006 Blanks for superabrasive cutting-off wheels Hand-held cutting-off in building and civil engineering AS/NZS 4518.1:1997 Bonded abrasivesDetermination and designation of grain size distributionMacrogrits F4 to F220 AS/NZS 4518.2:1997 Bonded abrasivesDetermination and designation of grain size distributionMicrogrits F230 to F1200 AS/NZS 4520:1997 Abrasive grainsSampling and splitting AS 45232005 Bonded abrasive productsGeneral requirements AS 4524.12005 Bonded abrasive productsDimensionsGrinding wheels for external cylindrical grinding between centres AS 4524.22005 Bonded abrasive productsDimensionsGrinding wheels for centreless external cylindrical grinding AS 4524.32005 Bonded abrasive productsDimensionsGrinding wheels for internal cylindrical grinding AS 4524.42005 Bonded abrasive productsDimensionsGrinding wheels for surface grinding/peripheral grinding AS 4524.52005 Bonded abrasive productsDimensionsGrinding wheels for surface grinding/face grinding AS 4524.62005 Bonded abrasive productsDimensionsGrinding wheels for tool and tool room grinding AS 4524.72005 Bonded abrasive productsDimensionsGrinding wheels for manually guided grinding
311
CYCLES
SUBJECT INDEX
Magnetic tapes AS 10111993 Information processing systemsUnrecorded 12.7 mm (0.5 in) wide magnetic tape for information interchange32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3200 ftpi) phase encoded and 356 ftpmm (9042 ftpi), NRZ1 AS 22411991 Data storage and transfer media9-track, 12.7 mm wide magnetic tape for information interchange using phase encoding at 126 ftpmm-63 cpmm AS 40621992 Information technology3.81 mm wide magnetic tape cartridge for information interchangeHelical scan recordingDDS format Optical storage devices AS 37831990 Data storage and transfer mediaCD-ROMData interchange on read-only 120 mm optical data disks AS 3956.11991 Information processing systems130 mm optical disk cartridge, write once, for information interchange Unrecorded optical disk cartridge AS 3956.21991 Information processing systems130 mm optical disk cartridge, write once, for information interchange Recording format AS 40791992 Information technology130 mm rewritable optical disk cartridge for information interchange HB 1782003 ISO/TR 12654 Electronic imaging Recommendations for the management of electronic recording systems for the recording of documents that may be required as evidence, on WORM optical disk DEMOGRAPHY see SOCIOLOGY. DEMOGRAPHY DENTISTRY Dental equipment AS EN 16402002 DentistryMedical devices for dentistry Equipment AS EN 16412002 DentistryMedical devices for dentistry Materials AS EN 16422002 DentistryMedical devices for dentistryDental implants Dental materials AS ISO 10993.112002 Biological evaluation of medical devices Tests for systemic toxicity Dentistry in general AS EN 5402002 Clinical investigation of medical devices for human subjects AS ISO 10993.92002 Biological evaluation of medical devices Framework for identification and quantification of potential degradation products DIAGNOSTIC, MAINTENANCE AND TEST EQUIPMENT AS/NZS 2538:2004 Vehicle support stands AS/NZS 2538:1995 Vehicle support stands AS/NZS 2615:2004 Hydraulic trolley jacks AS/NZS 2615:1995 Hydraulic trolley jacks AS/NZS 2640:1994 Portable ramps for vehicles AS/NZS 2693:2007 Vehicle jacks AS/NZS 2693:1993 Vehicle jacks AS 26971990 Jumper leads for automotive starting AS 3564.11988 Automotive repairsTerminologyAutomatic transmission AS 3564.21990 Automotive repairsTerminologyManual transmission AS 3564.31990 Automotive repairsTerminologyTransaxle AS 3564.41993 Automotive repairsTerminologyPower steering AS 3564.51993 Automotive repairsTerminologyEngine AS 3564.61994 Automotive repairsTerminologyConstant velocity joints AS 37901992 Portable warning triangles for motor vehicles AS 4211.11996 Gas recovery or combined recovery and recycling equipmentFluorocarbon refrigerants from automotive airconditioning systems AS 4430.12003 Evaluation of devices, additives and processes which claim to improve vehicle performanceEngines designed for leaded petrol to operate on regular unleaded petrol DISTRIBUTION AND VENDING MACHINES AS/NZS 3350.2.75:2001 Safety of household and similar electrical appliances- Particular requirements for commercial dispensing appliances and vending machines (IEC 60335-2-75:1995, MOD) AS/NZS 4864.1:2008 Performance of refrigerated beverage vending machinesTest methodsEnergy performance AS/NZS 4864.2:2008 Performance of refrigerated beverage vending machinesMinimum energy performance standard (MEPS) requirements AS/NZS 60335.2.75:2005 Household and similar electrical appliances SafetyParticular requirements for commercial dispensing appliances and vending machines
AS 4524.82005 Bonded abrasive productsDimensionsGrinding wheels for deburring and fettling/snagging AS 4524.92005 Bonded abrasive productsDimensionsGrinding wheels for high-pressure grinding AS 4524.102005 Bonded abrasive productsDimensionsStones for honing and superfinishings AS 4524.112005 Bonded abrasive productsDimensionsHand finishing sticks AS 4524.122005 Bonded abrasive productsDimensions Grinding wheels for deburring and fettling on a straight grinder AS 4524.132005 Bonded abrasive productsDimensions Grinding wheels for deburring and fettling on a vertical grinder AS 4524.142005 Bonded abrasive productsDimensions Grinding wheels for deburring and fettling/snagging on an angle grinder AS 4524.152005 Bonded abrasive productsDimensions Grinding wheels for cutting-off on stationary or mobile cutting-off machines AS 4524.162005 Bonded abrasive productsDimensions Grinding wheels for cutting-off on hand held power tools AS 45262006 Coated abrasivesAbrasive beltsSelection of width/length combinations AS 45272005 Coated abrasivesPlain sheets AS 45312006 Coated abrasivesFlap wheels with shaft AS 45322006 Coated abrasivesFlap wheels with incorporated flanges or separate flanges AS/NZS 4616:1999 Abrasive grains and crudesChemical analysis of silicon carbide AS 46382005 Coated abrasivesAbrasive rolls AS 48202006 Bonded abrasive productsPermissible unbalances of grinding wheels as deliveredStatic testing Cutting tools in general AS 18931977 Code of practice for the guarding and safe use of metal and paper cutting guillotines Drills, countersinks, reamers AS/NZS 2438.1:1994 Drills and reamersSpecification for twist drills Files AS 37461990 Files and rasps CYCLES AS/NZS 1927:1998 Pedal bicyclesSafety requirements AS 21421978 Reflectors for pedal bicycles AS 35621990 Lighting equipment for bicycles AS 40921993 Exercise cyclesSafety requirements AS/NZS 4287:1995 Child carrier seats for pedal bicyclesSafety requirements DATA STORAGE DEVICES Cassettes and cartridges for magnetic tapes AS 41161993 Information processing systemsData interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each sideISO Type 303 Magnetic disks AS 3712.11990 Data storage and transfer mediaData interchange on 90 mm diskettes using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side Dimensional, physical and magnetic characteristics AS 3712.21990 Data storage and transfer mediaData interchange on 90 mm diskettes using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each sideTrack format AS 37391990 Data storage and transfer mediaDesignation of unrecorded diskettes Magnetic storage devices in general AS 3636.51990 Data storage and transfer mediaStorage, transportation and maintenance of magnetic media for use in data processing and information storageGuide for use in the home environment AS 3977.11991 Information processing systemsHigh Density Digital Recording (HDDR)Unrecorded magnetic tape for HDDR applications AS 3977.21992 Information processing systemsHigh density digital recording (HDDR)Guide for interchange practice
312
SUBJECT INDEX
DOCUMENT IMAGING APPLICATIONS AS 1203.11996 Microfilming of engineering documentsOperating procedures AS 1203.21996 Microfilming of engineering documentsQuality criteria and control AS 1203.31996 Microfilming of engineering documentsUnitized 35 mm microfilm carriers AS 1203.41996 Microfilming of engineering documentsMicrofilming of drawings of special and exceptional elongated sizes AS 17171975 Unitized microfilm carriers (35 mm) AS 19981977 A6 microfiche for engineering and other data (excluding computer output microfiche) AS 24221981 Glossary of micrographics terms AS 28401986 Microfilming newspapers for archival purposes AS 36741989 Storage of microfilm AS/NZS 4577:1999 MicrographicsReaders for transparent microforms Performance characteristics AS/NZS 4578:1999 MicrographicsReaders for transparent microforms Measurement of characteristics AS/NZS 4579:1999 MicrographicsReader-printers for transparent microformsCharacteristics AS/NZS 4589:1999 MicrographicsMicrofilming of documents on 16 mm and 35 mm silver-gelatin type microfilmOperating procedures ATS 50832003 ISO/TS 12033 Electronic imagingGuidance for selection of document image compression methods AS/NZS ISO 12029:2007 Electronic imagingForms design optimization for electronic image management AS/NZS ISO 13694:2004 Optics and optical instrumentsLasers and laserrelated equipment -Test methods for laser beam power (energy) density distribution AS ISO 158012006 Electronic imagingInformation stored electronically Recommendations for trustworthiness and reliability AS ISO 184922006 Long-term preservation of electronic document-based information AS ISO 245372007 MicrographicsDimensions for reels used for 16 mm and 35 mm microfilm HB 1772003 ISO/TR 14105 Electronic imagingHuman and organizational for successful Electronic Image Management (EIM) implementation HB 1792003 ISO/TR 12037 Electronic imagingRecommendations for the expungement of information recorded on write-once optical media HB 1802003 ISO/TR 12036 MicrographicsExpungement, deletion, correction or amendment of records on microforms HB 1812003 ISO/TR 12031 MicrographicsInspection of silver-gelatin microforms for evidence of deterioration HB 1822003 ISO/TR 10200 Legal admissability of microforms MP 25:2002 Basic guide to microfilming DOMESTIC ELECTRICAL APPLIANCES IN GENERAL AS/NZS CISPR 14.1:2003 Electromagnetic compatibilityRequirements for household appliances, electric tools and similar apparatusEmission AS/NZS CISPR 14.2:2003 Electromagnetic compatibilityRequirements for household appliances electric tools and similar apparatusImmunity Product family standard AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS/NZS 3017:2007 Electrical installationsVerification guidelines AS/NZS 3100:2002 Approval and test specificationGeneral requirements for electrical equipment AS/NZS 3102:2002 Electric duct heaters AS/NZS 3105:2007 Approval and test specificationElectrical portable outlet devices AS 31111994 Approval and test specificationMiniature overcurrent circuitbreakers AS/NZS 3112:2004 Approval and test specificationPlugs and socket-outlets AS/NZS 3120:1999 Approval and test specificationCord extension sockets AS/NZS 3128:1998 Approval and test specificationPortable lamp standards and brackets AS/NZS 3130:1995 Approval and test specificationBeauty therapy equipment AS/NZS 3136:2001 Approval and test specificationElectrical equipment for spa and swimming pools AS/NZS 3160:2001 Approval and test specificationHand-held portable electric tools AS/NZS 3190:2002 Approval and test specificationResidual current devices (current-operated earth-leakage devices)
AS/NZS 3191:2008 Electric flexible cords AS/NZS 3194:1993 Approval and test specificationElectric shaver supply units AS/NZS 3197:2005 Approval and test specificationPortable electrical control or conditioning devices AS/NZS 3350.1:2002 Safety of household and similar electrical appliances General requirements (IEC 60335-1:1991, MOD) AS/NZS 3350.2.2:2001 Safety of household and similar electrical appliances- Particular requirements for vacuum cleaners and water suction cleaning appliances (IEC 60335-2-2:1993, MOD) AS/NZS 3350.2.3:1995 Safety of household and similar electrical appliancesParticular requirementsElectric irons AS/NZS 3350.2.4:1998 Safety of household and similar electrical appliancesParticular requirementsSpin extractors AS/NZS 3350.2.5:1995 Safety of household and similar electrical appliancesParticular requirementsDishwashers AS/NZS 3350.2.6:2006 Household and similar electrical appliancesSafety Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances(IEC 60335-2-6:1997, MOD) AS/NZS 3350.2.7:2001 Safety of household and similar electrical appliances- Particular requirements for washing machines (IEC 60335-27:2000, MOD) AS/NZS 3350.2.8:1995 Safety of household and similar electrical appliancesParticular requirementsShavers, hair clippers and similar appliances AS/NZS 3350.2.9:1999 Safety of household and similar electrical appliancesParticular requirementsGrills, toasters and similar portable cooking appliances AS/NZS 3350.2.10:1996 Safety of household and similar electrical appliancesParticular requirementsFloor treatment machines and wet scrubbing machines AS/NZS 3350.2.11:2001 Safety of household and similar electrical appliancesParticular requirementsParticular requirements for tumble dryers (IEC 60335-2-11:2000, MOD) AS/NZS 3350.2.12:1997 Safety of household and similar electrical appliancesParticular requirementsWarming plates and similar appliances AS/NZS 3350.2.13:2001 Safety of household and similar electrical appliances- Particular requirements for deep fat fryers, frying pans and similar appliances (IEC 60335-2-13:1993, MOD) AS/NZS 3350.2.14:1995 Safety of household and similar electrical appliancesParticular requirementsKitchen machines AS/NZS 3350.2.15:2002 Safety of household and similar electrical appliancesParticular requirements for appliances for heating liquids (IEC 60335-2-15:1995, MOD) AS/NZS 3350.2.16:1996 Safety of household and similar electrical appliancesParticular requirementsFood waste disposers AS/NZS 3350.2.17:2000 Safety of household and similar electrical appliancesParticular requirementsBlankets, pads and similar flexible heating AS/NZS 3350.2.21:1999 Safety of household and similar electrical appliancesParticular requirementsStorage water heaters AS/NZS 3350.2.23:2001 Safety of household and similar electrical appliances- Particular requirements for appliances for skin and hair care (IEC 60335-2-23:1996, MOD) AS/NZS 3350.2.24:2001 Safety of household and similar electrical appliances- Particular requirements for refrigerating appliances and icecream appliances and ice-makers (IEC 60335-2-24:2000, MOD) AS/NZS 3350.2.25:2001 Safety of household and similar electrical appliances- Particular requirements for microwave ovens (IEC 60335-225:1996, MOD) AS/NZS 3350.2.26:1996 Safety of household and similar electrical appliancesParticular requirementsClocks AS/NZS 3350.2.27:1996 Safety of household and similar electrical appliancesParticular requirementsAppliances for skin exposure to ultraviolet and infrared radiation AS/NZS 3350.2.28:1996 Safety of household and similar electrical appliancesParticular requirementsSewing machines AS/NZS 3350.2.29:2001 Safety of household and similar electrical appliances- Particular requirements for battery chargers (IEC 60335-229:1994, MOD) AS/NZS 3350.2.30:2007 Safety of household and similar electrical appliancesParticular requirements for Room heaters (IEC 60335-2-30:1996, MOD) AS/NZS 3350.2.30:1997 Safety of household and similar electrical appliancesParticular requirementsRoom heaters AS/NZS 3350.2.31:2001 Safety of household and similar electrical appliances- Particular requirements for range hoods (IEC 60335-2-31:1995, MOD)
313
SUBJECT INDEX
AS/NZS 3350.2.97:2000 Safety of household and similar electrical appliancesParticular requirementsDrives for rolling shutters, awnings, blinds and similar equipment (IEC60335-2-97:1998, MOD) AS/NZS 3350.2.98:1998 Safety of household and similar electrical appliancesParticular requirementsHumidifiers AS 3533.32003 Amusement rides and devicesIn-service inspection AS/NZS 4417.1:2000 Marking of electrical products to indicate compliance with regulationsGeneral rules for use of the mark AS/NZS 4417.2:2001 Marking of electrical products to indicate compliance with regulationsSpecific requirements for electrical safety regulatory applications AS/NZS 4417.3:1996 Marking of electrical products to indicate compliance with regulationsSpecific requirements for electromagnetic compatibility regulatory applications AS/NZS 4701:2000 Requirements for domestic electrical appliances and equipment for reconditioning or parts recycling AS 47552007 Framework for demand response capabilities and supporting technologies for electrical products AS/NZS 60320.1:2004 Appliance couplers for household and similar general purposesGeneral requirements (IEC60320-1, Ed. 2.0 (2001) MOD) AS/NZS 60320.2.1:2004 Appliance couplers for household and similar general purposes- Sewing machine couplers (IEC 60320-2-1, Ed. 2.0 (2000) MOD) AS/NZS 60320.2.2:2004 Appliance couplers for household and similar general purposes- Interconnection couplers for household and similar equipment (IEC 60320-2-2, Ed. 2.0 (1998) MOD) AS/NZS 60335.1:2002 Household and similar electrical appliancesSafety General requirements (IEC 60335-1 Ed 4.2, MOD) AS/NZS 60335.2.2:2002 Household and similar electrical appliances Safety- Particular requirements for vacuum cleaners and water suction cleaning appliances (IEC 60335-2-2 Ed 5.2, MOD) AS/NZS 60335.2.3:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for electric irons AS/NZS 60335.2.4:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for spin extractors AS/NZS 60335.2.5:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for dishwashers AS/NZS 60335.2.6:2008 Household and similar electrical appliances SafetyParticular requirements for stationary cooking ranges, hobs, ovens and similar appliances (IEC 60335-2-6 Ed 5.2, MOD) AS/NZS 60335.2.6:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for stationary cooking ranges, hobs, ovens and similar appliances AS/NZS 60335.2.7:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for washing machines AS/NZS 60335.2.8:2004 Household and similar electrical appliances Safety- Particular requirements for shavers, hair clippers and similar appliances AS/NZS 60335.2.9:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for grills, toasters and similar portable cooking appliances AS/NZS 60335.2.10:2006 Household and similar electrical appliances SafetyParticular requirements for floor treatment machines and wet scrubbing machines(IEC 60335-2-10 Ed 5, IDT) AS/NZS 60335.2.11:2002 Household and similar electrical appliances Safety- Particular requirements for tumble dryers (IEC 60335-2-11 Ed 6, MOD) AS/NZS 60335.2.12:2004 Household and similar electrical appliances Safety- Particular requirements for warming plates and similar appliances AS/NZS 60335.2.13:2004 Household and similar electrical appliances Safety- Particular requirements for deep fat fryers, frying pans and similar appliances AS/NZS 60335.2.14:2007 Household and similar electrical appliances SafetyParticular requirements for kitchen machines (IEC 60335-2-14: Ed 5.0, MOD) AS/NZS 60335.2.14:2004 Household and similar electrical appliances Safety- Particular requirements for kitchen machines AS/NZS 60335.2.15:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for appliances for heating liquids AS/NZS 60335.2.16:2006 Household and similar electrical appliances SafetyParticular requirements for food waste disposers(IEC 60335-2-16 Ed 5, IDT) AS/NZS 60335.2.17:2004 Household and similar electrical appliances Safety- Particular requirements for blankets, pads and similar flexible heating appliances
AS/NZS 3350.2.32:2001 Safety of household and similar electrical appliances- Particular requirements for massage appliances (IEC 60335-232:1993, MOD) AS/NZS 3350.2.34:2001 Safety of household and similar electrical appliancesParticular requirementsMotor-compressors AS/NZS 3350.2.35:1999 Safety of household and similar electrical appliancesParticular requirementsInstantaneous water heaters AS/NZS 3350.2.40:2001 Safety of household and similar electrical appliances- Particular requirements for electrical heat pumps, airconditioners and dehumidifiers (IEC 60335-2-40:1995, MOD) AS/NZS 3350.2.41:1997 Safety of household and similar electrical appliancesParticular requirementsPumps AS/NZS 3350.2.43:2001 Safety of household and similar electrical appliances- Particular requirements for clothes dryers and towel rails (IEC 60335-2-43:1995, MOD) AS/NZS 3350.2.44:1999 Safety of household and similar electrical appliancesParticular requirementsIroners AS/NZS 3350.2.45:1997 Safety of household and similar electrical appliancesParticular requirementsPortable heating tools and similar appliances AS/NZS 3350.2.51:1998 Safety of household and similar electrical appliancesParticular requirementsStationary circulation pumps for heating and service water installations AS/NZS 3350.2.52:1996 Safety of household and similar electrical appliancesParticular requirementsOral hygiene appliances AS/NZS 3350.2.53:1998 Safety of household and similar electrical appliancesParticular requirementsSauna heating appliances AS/NZS 3350.2.54:1997 Safety of household and similar electrical appliancesParticular requirementsSurface-cleaning appliances employing liquids AS/NZS 3350.2.55:1998 Safety of household and similar electrical appliancesParticular requirementsElectrical appliances for use with aquariums and garden ponds AS/NZS 3350.2.56:1998 Safety of household and similar electrical appliancesParticular requirementsProjectors and similar appliances AS/NZS 3350.2.59:1999 Safety of household and similar electrical appliancesParticular requirementsInsect killers AS/NZS 3350.2.60:2000 Safety of household and similar electrical appliancesParticular requirementsWhirlpool baths (IEC 60335-2-60:1997, MOD) AS/NZS 3350.2.61:2001 Safety of household and similar electrical appliances- Particular requirements for thermal storage room heaters (IEC 60335-2-61:1992, MOD) AS/NZS 3350.2.65:1997 Safety of household and similar electrical appliancesParticular requirementsAir-cleaning appliances AS/NZS 3350.2.66:1997 Safety of household and similar electrical appliancesParticular requirementsWater-bed heaters AS/NZS 3350.2.73:1996 Safety of household and similar electrical appliancesParticular requirementsFixed immersion heaters AS/NZS 3350.2.74:2001 Safety of household and similar electrical appliances- Particular requirements for portable immersion heaters (IEC 60335-2-74:1994, MOD) AS/NZS 3350.2.75:2001 Safety of household and similar electrical appliances- Particular requirements for commercial dispensing appliances and vending machines (IEC 60335-2-75:1995, MOD) AS/NZS 3350.2.76:1998 Safety of household and similar electrical appliancesParticular requirementsElectric fence energizers AS/NZS 3350.2.78:1996 Safety of household and similar electrical appliancesParticular requirementsOutdoor barbecues AS/NZS 3350.2.79:2001 Safety of household and similar electrical appliances- Particular requirements for high pressure cleaners and steam cleaners, for industrial and commercial use (IEC 60335-2-79:1995, MOD) AS/NZS 3350.2.80:1998 Safety of household and similar electrical appliancesParticular requirementsElectric fans AS/NZS 3350.2.81:1998 Safety of household and similar electrical appliancesParticular requirementsFoot warmers and heating mats AS/NZS 3350.2.82:2000 Safety of household and similar electrical appliancesParticular requirementsService machines and amusement machines (IEC 60335-2-82:1999, MOD) AS/NZS 3350.2.84:2000 Safety of household and similar electrical appliancesParticular requirementsToilets (IEC 60335-2-84:1998, MOD) AS/NZS 3350.2.85:1998 Safety of household and similar electrical appliancesParticular requirementsFabric steamers AS/NZS 3350.2.95:2000 Safety of household and similar electrical appliancesParticular requirementsDrives for vertically moving garage doors for residential use
314
SUBJECT INDEX
AS/NZS 60335.2.21:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for storage water heaters AS/NZS 60335.2.23:2004 Household and similar electrical appliances Safety- Particular requirements for appliances for skin or hair care AS/NZS 60335.2.24:2003 Household and similar electrical appliances Safety- Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers AS/NZS 60335.2.25:2002 Household and similar electrical appliances SafetyParticular requirements for microwave ovens, including combination microwave ovens (IEC 60335-2-25 Ed 5.2, IDT) AS/NZS 60335.2.26:2006 Household and similar electrical appliances SafetyParticular requirements for clocks(IEC 60335-2-26 Ed 4, IDT) AS/NZS 60335.2.27:2004 Household and similar electrical appliances Safety- Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation AS/NZS 60335.2.28:2006 Household and similar electrical appliances SafetyParticular requirements for sewing machines (IEC 60335-2-28 Ed 4, IDT) AS/NZS 60335.2.29:2004 Household and similar electrical appliances Safety- Particular requirements for battery chargers AS/NZS 60335.2.30:2004 Household and similar electrical appliances Safety- Particular requirements for room heaters AS/NZS 60335.2.31:2004 Household and similar electrical appliances Safety- Particular requirements for range hoods AS/NZS 60335.2.32:2004 Household and similar electrical appliances Safety- Particular requirements for massage appliances AS/NZS 60335.2.34:2003 Household and similar electrical appliances Safety- Particular requirments for motor-compressors AS/NZS 60335.2.35:2004 Household and similar electrical appliances Safety- Particular requirements for instantaneous water heaters (IEC 60335-2-35 Ed 4.1, IDT) AS/NZS 60335.2.40:2006 Household and similar electrical appliances SafetyParticular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40 Ed 4.2, IDT) AS/NZS 60335.2.41:2004 Household and similar electrical appliances Safety- Particular requirements for pumps AS/NZS 60335.2.43:2005 Household and similar electrical appliances Safety- Particular requirements for clothes dryers and towel rails (IEC 60335-2-43 Ed 3.0, MOD) AS/NZS 60335.2.44:2006 Household and similar electrical appliances SafetyParticular requirements for ironers (IEC 60335-2-44 Ed 3, IDT) AS/NZS 60335.2.45:2004 Household and similar electrical appliances Safety- Particular requirements for portable heating tools and similar appliances AS/NZS 60335.2.51:2006 Household and similar electrical appliances SafetyParticular requirements for stationary circulation pumps for heating and service water installations (IEC 60335-2-51 Ed 3, IDT) AS/NZS 60335.2.52:2006 Household and similar electrical appliances SafetyParticular requirements for oral hygiene appliances (IEC 603352-52 Ed 3, IDT) AS/NZS 60335.2.53:2006 Household and Similar Electrical Appliances SafetyParticular requirements for sauna heating appliances AS/NZS 60335.2.54:2005 Household and similar electrical appliances Safety- Particular requirements for surface-cleaning appliances for household use employing liquids or steam (IEC 60335-2-54 Ed 3.1, IDT) AS/NZS 60335.2.55:2004 Household and similar electrical appliances Safety- Particular requirements for electrical appliances for use with aquariums and garden ponds AS/NZS 60335.2.56:2006 Household and similar electrical appliances SafetyParticular requirements for projectors and similar appliances (IEC 60335-2-56 Ed 3, IDT) AS/NZS 60335.2.59:2005 Household and similar electrical appliances Safety- Particular requirements for insect killers (IEC 60335-2-59 Ed 3.0, MOD) AS/NZS 60335.2.60:2006 Household and similar electrical appliances SafetyParticular requirements for whirlpool baths and whirlpool spas(IEC 60335-2-60 Ed 3.1, MOD) AS/NZS 60335.2.61:2005 Household and similar electrical appliances Safety- Particular requirements for thermal-storage room heaters (IEC 60335-2-61 Ed 2.0, MOD) AS/NZS 60335.2.65:2006 Household and similar electrical appliances SafetyParticular requirements for air-cleaning appliances (IEC 60335-265 Ed 3, IDT) AS/NZS 60335.2.66:2004 Household and similar electrical appliances Safety:- Particular requirements for water-bed heaters AS/NZS 60335.2.68:2003 Household and Similar Electrical Appliances Safety- Particular requirements for spray extraction appliances, for industrial and commercial use
AS/NZS 60335.2.69:2003 Household and Similar Electrical Appliances Safety- Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use AS/NZS 60335.2.72:2003 Household and Similar Electrical Appliances Safety- Particular requirements for automatic machines for floor treatment for commercial and industrial use AS/NZS 60335.2.73:2005 Household and similar electrical appliances Safety- Particular requirements for fixed immersion heaters (IEC 60335-2-73 Ed 2.0,IDT) AS/NZS 60335.2.74:2005 Household and similar electrical apppliances Safety- Particular requirements for portable immersion heaters (IEC 60335-2-74 Ed 2.0, IDT) AS/NZS 60335.2.75:2005 Household and similar electrical appliances SafetyParticular requirements for commercial dispensing appliances and vending machines AS/NZS 60335.2.76:2003 Household and Similar Electrical Appliances Safety- Particular requirements for electric fence energizers AS/NZS 60335.2.77:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for pedestrian controlled mains-operated lawnmowers AS/NZS 60335.2.78:2005 Household and similar electrical appliances Safety- Particular requirements for outdoor barbeques (IEC 60335-2-78 Ed 2.0, IDT) AS/NZS 60335.2.79:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for high pressure cleaners and steam cleaners, for industrial and commercial use AS/NZS 60335.2.80:2004 Household and similar electrical appliances Safety- Particular requirements for fans AS/NZS 60335.2.81:2006 Household and Similar Electrical Appliances SafetyParticular requirements for foot warmers and heating mats AS/NZS 60335.2.82:2006 Household and Similar Electrical Appliances SafetyParticular requirements for amusement machines and personal service machines AS/NZS 60335.2.84:2006 Household and Similar Electrical Appliances SafetyParticular requirements for toilets AS/NZS 60335.2.85:2005 Household and similar electrical appliances Safety- Particular requirements for fabric steamers (IEC 60335-2-85 Ed 2.0, IDT) AS/NZS 60335.2.87:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for electric animal-stunning equipment AS/NZS 60335.2.90:2006 Household and Similar Electrical Appliances SafetyParticular requirements for commercial microwave ovens AS/NZS 60335.2.91:2008 Household and similar electrical appliances SafetyParticular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers (IEC 60335-2-91 Ed 3, MOD) AS/NZS 60335.2.91:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers AS/NZS 60335.2.92:2003 Household and Similar Electrical Appliances Safety- Particular requirements for pedestrian-controlled mainsoperated lawn scarifiers and aerators AS/NZS 60335.2.94:2008 Household and similar electrical appliances SafetyParticular requirements for scissors type grass shears (IEC 60335-2-94 Ed 3, MOD) AS/NZS 60335.2.95:2005 Household and similar electrical appliances SafetyParticular requirements for drives for vertically moving garage doors for residential use AS/NZS 60335.2.96:2002 Household and similar electrical appliances SafetyParticular requirements for flexible sheet heating elements for room heating (IEC 60335-2-96:2002, IDT) AS/NZS 60335.2.97:2007 Household and similar electrical appliances SafetyParticular requirements for drives for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97 Ed 2.1, IDT) AS/NZS 60335.2.98:2005 Household and similar electrical appliances Safety- Particular requirements for humidifiers (IEC 60335-2-98 Ed 2.1, IDT) AS/NZS 60335.2.100:2003 Household and similar electrical appliances Safety- Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums AS/NZS 60335.2.101:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for vaporizers AS/NZS 60335.2.102:2004 Household and similar electrical appliances Safety- Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections AS/NZS 60335.2.103:2007 Household and similar electrical appliances SafetyParticular requirements for drives for gates, doors and windows (IEC 60335-2-103: Ed 2, IDT)
315
DOMESTIC SAFETY
SUBJECT INDEX
AS 1852.8411988 International electrotechnical vocabularyIndustrial electroheating AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS/NZS 3017:2007 Electrical installationsVerification guidelines AS/NZS 4886:2007 Domestic solid fuel burning appliancePellet heaters Determination of flue gas emission Electric heaters AS/NZS 3102:2002 Electric duct heaters AS/NZS 3350.2.30:2007 Safety of household and similar electrical appliancesParticular requirements for Room heaters (IEC 60335-2-30:1996, MOD) AS/NZS 3350.2.30:1997 Safety of household and similar electrical appliancesParticular requirementsRoom heaters AS/NZS 3350.2.40:2001 Safety of household and similar electrical appliances- Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:1995, MOD) AS/NZS 3350.2.61:2001 Safety of household and similar electrical appliances- Particular requirements for thermal storage room heaters (IEC 60335-2-61:1992, MOD) AS 38142005 Industrial and commercial gas-fired appliances AS/NZS 60335.2.30:2004 Household and similar electrical appliancesSafety- Particular requirements for room heaters AS/NZS 60335.2.40:2006 Household and similar electrical appliancesSafetyParticular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40 Ed 4.2, IDT) AS/NZS 60335.2.61:2005 Household and similar electrical appliancesSafety- Particular requirements for thermal-storage room heaters (IEC 60335-2-61 Ed 2.0, MOD) AS/NZS 60335.2.73:2005 Household and similar electrical appliancesSafety- Particular requirements for fixed immersion heaters (IEC 60335-2-73 Ed 2.0,IDT) AS/NZS 60335.2.96:2002 Household and similar electrical appliancesSafetyParticular requirements for flexible sheet heating elements for room heating (IEC 60335-2-96:2002, IDT) Gas heaters AS 18531983 Automatic oil and gas burnersMechanical draught AS 26582008 LP GasPortable and mobile appliances AS 26582003 LP GasPortable and mobile appliances AS 45522005 Gas fired water heaters for hot water supply and/or central heating AS 45532008 Gas space heating appliances AS 45562000 (AG 1062000) Indirect gas-fired ducted air-heaters AS 45572004 Domestic outdoor gas barbecues AS 45582000 (AG 1082000) Decorative gas log and other fuel effect appliances AS 45602004 Gas pool heaters AS 45632004 Commercial catering gas equipment AS 45652004 Radiant gas heaters for outdoor and non-residential indoor use AS 45752005 Gas appliancesQuality of servicing AS 46432007 Overhead radiant tube gas heaters AS 46702006 Commercial propane and commercial butane for heating purposes AG 4041988 Approval requirements for LPG mobile industrial direct fired air heaters (incorporates Amendments) Heating appliances in general AS/NZS 2286:2001 Space heatersSecondary guards AS/NZS 60335.2.102:2004 Household and similar electrical appliancesSafety- Particular requirements for gas, oil and solidfuel burning appliances having electrical connections Liquid fuel heaters AS 16911985 Domestic oil-fired appliancesInstallation AS 18531983 Automatic oil and gas burnersMechanical draught Solid fuel heaters AS/NZS 2918:2001 Domestic solid fuel burning appliances Installation AS 29181990 Domestic solid fuel burning appliancesInstallation AS/NZS 3869:1999 Domestic solid fuel burning appliancesDesign and construction AS 38691991 Domestic solid fuel burning appliances Specifications
AS/NZS 60335.2.105:2006 Household and Similar Electrical Appliances SafetyParticular requirements for multifunctional shower cabinets AS/NZS 60335.2.106:2007 Household and similar electrical appliances SafetyParticular requirements for heated carpets and for heating units for room heating installed under removable floor coverings AS/NZS 60335.2.108:2008 Household and similar electrical appliances SafetyParticular requirements for electrolysers (IEC 60335-2-108 Ed 1, MOD) AS/NZS 60598.2.20:2002 LuminairesParticular requirementsLighting chains (IEC 60598-2-20:1996, MOD) AS/NZS 60745.1:2003 Hand-held motor-operated electric toolsSafety General requirements AS/NZS 60745.2.1:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for drills and impact drills AS/NZS 60745.2.2:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for screwdrivers AS/NZS 60745.2.4:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for sanders and polishers AS/NZS 60745.2.5:2007 Hand-held motor-operated electric toolsSafety Particular requirements for circular saws (IEC 60745-2-5: Ed 4.0, IDT) AS/NZS 60745.2.5:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for circular saws AS/NZS 60745.2.6:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for hammers AS/NZS 60745.2.8:2003 Hand-held motor-operated electric toolsSafety Particular requirementsParticular requirements for shears and nibblers AS/NZS 60745.2.9:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for tappers AS/NZS 60745.2.11:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for reciprocating saws AS/NZS 60745.2.12:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for concrete vibrators AS/NZS 60745.2.14:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for planers AS/NZS 60745.2.15:2006 Hand-held Motor-operated Electric ToolsSafety Particular requirements for hedge trimmers AS/NZS 60745.2.17:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for routers and trimmers AS/NZS 60745.2.18:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for strapping tools AS/NZS 60745.2.19:2005 Hand-held motor-operated electric toolsSafety Particular requirements for jointers AS/NZS 60745.2.20:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for band saws AS/NZS 60745.2.21:2003 Hand-held motor-operated electric toolsSafetyParticular requirements for drain cleaners AS/NZS 61008.1:2004 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) General rules (IEC 61008-1 Ed. 2.1 (2002) MOD) AS/NZS 61009.1:2004 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules (IEC 61009-1 Ed. 2.1 (2003) MOD) AS/NZS 61558.2.6:2001 Safety of power transformers, power supply units and similar- Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997, MOD) AS/NZS 61558.2.9:2003 Safety of power transformers, power supply units and similar devices -- Particular requirements for transformers for class III handlamps for tungsten filament lamps AS/NZS 62115:2008 Electric ToysSafety AS/NZS 62301:2005 Household electrical appliancesMeasurement of standby power (IEC62301, Ed. 1.0 (2005) MOD) HB 37.21993 Handbook of Australian fire StandardsElectrical equipment HB 295.3.142007 Product Safety FrameworkMelting and dissolving of materialsDishwasher safety HB 295.3.152007 Product Safety FrameworkMelting and dissolving of materialsMicrowave oven resistance HB 295.3.162007 Product Safety FrameworkMelting and dissolving of materialsWashing by hand DOMESTIC SAFETY AS 28181993 Guide to swimming pool safety AS 28201993 Gate units for private swimming pools AS 42262008 Guidelines for safe housing design AS 4361.21998 Guide to lead paint managementResidential and commercial buildings DOMESTIC, COMMERCIAL AND INDUSTRIAL HEATING APPLIANCES AS 1357.12004 Valves primarily for use in heated water systems Protection valves
316
SUBJECT INDEX
AS/NZS 4012:1999 Domestic solid fuel burning applianceMethod for determination of power output and efficiency AS/NZS 4013:1999 Domestic solid fuel burning applicances Method for determination of flue gas emission AS/NZS 4014.1:1999 Domestic solid fuel burning appliancesTest fuelsHardwood AS/NZS 4014.2:1999 Domestic solid fuel burning appliancesTest fuelsSoftwood AS/NZS 4014.3:1999 Domestic solid fuel burning appliancesTest fuelsLignite briquettes AS/NZS 4014.4:1999 Domestic solid fuel burning appliancesTest fuelsSub-bituminous coal AS/NZS 4014.5:1999 Domestic solid fuel burning appliancesTest fuelsSemi-anthracite coal briquettes AS/NZS 4886:2007 Domestic solid fuel burning appliancePellet heatersDetermination of flue gas emission AS/NZS 5078:2007 Domestic solid fuel burning appliancesPellet heatersMethod for determination of power output and efficiency HB 170:2002 Wood Heating Resource Handbook Guide to the Selection, Installation and Operation of Wood Heaters DRUMS see BARRELS. DRUMS. CANISTERS EARTH-MOVING MACHINERY AS 2012.11990 AcousticsMeasurement of airborne noise emitted by earth-moving machinery and agricultural tractorsStationary test conditionDetermination of compliance with limits for exterior noise AS 2012.21990 AcousticsMeasurement of airborne noise emitted by earth-moving machinery and agricultural tractorsStationary test conditionOperator's position AS 2294.11997 Earth-moving machineryProtective structuresGeneral AS 2294.1 Supplement 12003 Earth-moving machineryProtective structuresGeneralOperator protective structures fitted to plant used in timber industry (forest operations) (Supplement to AS 2294.11997) AS 2958.11995 Earth-moving machinerySafetyWheeled machines Brakes AS 2958.31992 Earth-moving machinerySafetyRoller compactorsBrake systems AS 38681991 Earth-moving machineryDesign guide for access systems AS 42421994 Earth-moving machinery and ancillary equipment for use in minesElectrical wiring systems at extra-low voltage AS 4457.12007 Earth-moving machineryOff-the-road wheels, rims and tyresMaintenance and repairWheel assemblies and rim assemblies AS 4457.22008 Earth-moving machineryOff-the-road wheels, rims and tyresMaintenance and repairTyres AS 47722008 Earth-moving machineryQuickhitches for excavators and backhoe loaders AS 49872002 Earth-moving machineryTip-over protection structure (TOPS) for compact excavatorsLaboratory tests and performance requirements EARTHWORKS. EXCAVATIONS. FOUNDATION CONSTRUCTION. UNDERGROUND WORKS AS 17261993 Geotechnical site investigations AS/NZS 2041:1998 Buried corrugated metal structures AS 21591995 PilingDesign and installation AS 2159 Supplement 11996 PilingDesign and installationGuidelines (Supplement to AS 21591995) AS 28701996 Residential slabs and footingsConstruction AS 2870 Supplement 11996 Residential slabs and footingsConstruction Commentary (Supplement to AS 28701996) AS 3703.11989 Long-span corrugated steel structuresMaterials and manufacture AS 3703.21989 Long-span corrugated steel structuresDesign and installation AS 37271993 Guide to residential pavements AS 37982007 Guidelines on earthworks for commercial and residential developments AS 37981996 Guidelines on earthworks for commercial and residential developments AS 46782002 Earth-retaining structures AS 4744.12000 Steel shoring and trench liningDesign AS 50472005 Hydraulic shoring and trench lining equipment HB 281997 The design of residential slabs and footings EDUCATION HB 2012006 Tutoring code of practice ELECTRIC TRACTION EQUIPMENT AS 1102.121984 Graphical symbols for electrotechnologyElectric traction
DRUMS
ELECTRICAL ACCESSORIES AS 60068.2.382003 Environmental testingTestsTest Z/AD: Composite temperature/humidity cyclic test AS 60068.2.392003 Environmental testingTestsTest Z/AMD: Combined sequential cold, low air pressure and damp heat test AS 60068.2.402003 Environmental testingTestsTest Z/AM: Combined cold/low air pressure tests AS 60068.2.412003 Environmental testingTestsTest Z/BM: Combined dry heat/low air pressure tests AS 60068.2.452003 Environmental testingTestsTest XA and guidance: Immersion in cleaning solvents AS 60068.2.472003 Environmental testingTestsMounting of compounds, equipment and other articles for vibration, impact and similar dynamic tests AS 60068.2.482003 Environmental testingTestsGuidance on the application of the tests of AS 60068 to simulate the effects of storage AS 60068.2.502003 Environmental testingTestsTest Z/Afc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heatdissipating specimens AS 60068.2.662003 Environmental testingTestsTest Cx: Damp heat, steady state (unsaturated pressurized vapour) AS 60068.2.672003 Environmental testingTestsTest Cy: Damp heat, steady state accelerated test primarily intended for components AS 60068.2.682003 Environmental testingTestsTest L: Dust and sand AS 60068.2.702003 Environmental testingTestsTest Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands AS 60068.2.742003 Environmental testingTestsTest Xc: Fluid contamination AS 60068.2.752003 Environmental testingTestsTest Eh: Hammer tests AS 60068.2.782003 Environmental testingTestsTest Cab: Damp heat, steady state Conduits for electrical purposes AS/NZS 2053.1:2001 Conduits and fittings for electrical installationsGeneral requirements AS/NZS 2053.2:2001 Conduits and fittings for electrical installationsRigid plain conduits and fittings of insulating material AS/NZS 2053.3:1995 Conduits and fittings for electrical installationsRigid plain conduits and fittings of fibre-reinforced concrete material AS/NZS 2053.4:1995 Conduits and fittings for electrical installationsFlexible plain conduits and fittings of insulating material AS/NZS 2053.5:2001 Conduits and fittings for electrical installationsCorrugated conduits and fittings of insulating material AS/NZS 2053.6:2001 Conduits and fittings for electrical installationsProfile-wall, smooth-bore conduits and fittings of insulating material AS/NZS 2053.7:2002 Conduits and fittings for electrical installations.Rigid metal conduits and fittings AS/NZS 2053.8:1995 Conduits and fittings for electrical installationsFlexible conduits and fittings of metal or composite material Connecting devices AS 18822002 Earth and bonding clamps AS 26292008 Separable insulated connectors for power distribution systems above 1 kV AS 31242002 Approval and test specification for overhead line connector boxes AS/NZS 3439.5:2001 Low-voltage switchgear and controlgear assembliesParticular requirements for assemblies intended to be installed outdoors in public placesCable distribution cabinets (CDCs) for power distribution in networks AS/NZS 4325.1:1995 Compression and mechanical connectors for power cables with copper or aluminium conductorsTest methods and requirements AS/NZS 4396:1999 ConnectorsInsulation piercingFor 0.6/1 kV aerial bundled cables AS/NZS 4437:1996 Solderless crimped connectionsGeneral requirements, test methods and practical guidance AS 46272005 Quick-connect devices for gas AS/NZS 60702.2:2005 Mineral insulated cables and their terminations with a rated voltage not exceeding 750VTerminations AS/NZS 60998.1:1998 Connecting devices for low voltage circuits for household and similar purposesGeneral requirements AS/NZS 60998.2.1:1998 Connecting devices for low voltage circuits for household and similar purposes- Particular requirements for connecting devices as separate entities with screw-type clamping units
317
ELECTRICAL ACCESSORIES
SUBJECT INDEX
AS 60947.4.22004 Low-voltage switchgear and controlgear Contactors and motor-startersA.C. semiconductor motor controllers and starters AS 60947.5.12004 Low-voltage switchgear and controlgear Control circuit devices and switching elements Electromechanical control circuit devices AS 60947.5.42004 Low-voltage switchgear and controlgear Control circuit devices and switching elementsMethods of assessing the performance of low-energy contactsSpecial tests AS 60947.5.72004 Low-voltage switchgear and controlgear Control circuit devices and switching elementsRequirements for proximity devices with analogue output AS 60947.6.22004 Low-voltage switchgear and controlgear Multiple function equipmentControl and protective switching devices (or equipment) (CPS) AS 60947.7.12004 Low-voltage switchgear and controlgear Ancillary equipmentTerminal blocks for copper conductors AS 60947.7.22004 Low-voltage switchgear and controlgear Ancillary equipmentProtective conductor terminal blocks for copper conductors AS 60947.7.32004 Low-voltage switchgear and controlgear Ancillary equipmentSafety requirements for fuse terminal blocks AS/NZS 61008.1:2004 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)General rules (IEC 61008-1 Ed. 2.1 (2002) MOD) AS/NZS 61009.1:2004 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)General rules (IEC 61009-1 Ed. 2.1 (2003) MOD) AS/NZS 61459:2000 Low-voltage fusesCoordination between fuses and contactors/motor-startersApplication guide AS 618182005 Application guide for low-voltage fuses AS 62271.1002008 High-voltage switchgear and controlgear High-voltage alternating-current circuit-breakers (IEC 62271100, Ed. 1.2 (2006) MOD) AS 62271.1022005 High voltage switchgear and controlgear Alternating current disconnectors and earthing switches (IEC 62271-102, Ed.1.0(2003) MOD) AS 62271.1102006 High-voltage switchgear and controlgear Inductive load switching AS 62271.2002005 High-voltage switchgear and controlgearA.C. metal-enclosed switchgear and controlgear for rated voltages above 1kV and up to and including 52kV (IEC 62271-200, Ed. 1 (2003) MOD) AS 62271.2032005 High-voltage switchgear and controlgearGasinsulated metal-enclosed switchgear for rated voltages above 52kV (IEC62271-203, Ed. 1.0 (2003) MOD) AS 62271.3082005 High voltage switchgear and controlgear Guide for asymmetrical short-circuit breaking test duty T100a HB 1131998 Residual current devicesWhat they do and how they do it Plugs, socket-outlets, couplers AS/NZS 3105:2007 Approval and test specificationElectrical portable outlet devices AS/NZS 3112:2004 Approval and test specificationPlugs and socket-outlets AS/NZS 3120:1999 Approval and test specificationCord extension sockets AS/NZS 3122:2005 Approval and test specificationSocket-outlet adaptors AS/NZS 3123:2005 Approval and test specificationPlugs, socketoutlets and couplers for general industrial application AS/NZS 3131:2001 Approval and test specificationPlugs and socket-outlets for stationary appliances AS/NZS 3199:2007 Approval and test specificationCord extension sets AS 3533.32003 Amusement rides and devicesIn-service inspection AS/NZS 60320.1:2004 Appliance couplers for household and similar general purposesGeneral requirements (IEC60320-1, Ed. 2.0 (2001) MOD) AS/NZS 60320.2.1:2004 Appliance couplers for household and similar general purposes- Sewing machine couplers (IEC 60320-2-1, Ed. 2.0 (2000) MOD)
AS/NZS 60998.2.2:1998 Connecting devices for low voltage circuits for household and similar purposes- Particular requirements for connecting devices as separate entities with screwless-type clamping units AS/NZS 60998.2.3:1998 Connecting devices for low voltage circuits for household and similar purposes- Particular requirements for connecting devices as separate entities with insulation piercing clamping units AS/NZS 60998.2.4:1998 Connecting devices for low voltage circuits for household and similar purposes- Particular requirements for twist-on connecting devices AS/NZS 61210:2002 Connecting devicesFlat quick-connect terminations for electrical copper conductorsSafety requirements (IEC 61210:1993, MOD) Electrical accessories in general AS/NZS 1102.103:1997 Graphical symbols for electrotechnical documentationConductors and connecting devices AS 37681990 Guide to the effects of temperature on electrical equipment AS/NZS 4805.1:2007 Accessories for electric cablesTest requirementsPower cables with extruded insulation for rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV AS/NZS 4805.2:2007 Accessories for electric cablesTest requirementsImpregnated paper-insulated metal-sheathed cables for rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV (excluding gas-pressure and oil-filled cables) AS 60947.5.42004 Low-voltage switchgear and controlgear Control circuit devices and switching elementsMethods of assessing the performance of low-energy contactsSpecial tests Fuses and other overcurrent protection devices AS 1033.11990 High voltage fuses (for rated voltages exceeding 1000 V)Expulsion type AS 1033.21988 High voltage fuses (for rated voltages exceeding 1000 V)Current-limiting (powder-filled) type AS 1307.21996 Surge arrestersMetal-oxide surge arresters without gaps for a.c. systems AS 20241991 High voltage a.c. switchgear and controlgear Switch-fuse combinations AS 21841985 Low voltage switchgear and controlgearMouldedcase circuit-breakers for rated voltages up to and including 600 V a.c. and 250 V d.c. AS 31111994 Approval and test specificationMiniature overcurrent circuit-breakers AS 31351997 Approval and test specificationSemi-enclosed fuses for a.c. circuits AS/NZS 3190:2002 Approval and test specificationResidual current devices (current-operated earth-leakage devices) AS/NZS 5033:2005 Installation of photovoltaic (PV) arrays AS 60269.12005 Low-voltage fusesGeneral requirements AS 60269.2.02005 Low-voltage fuses- Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) AS 60269.2.12005 Low-voltage fuses- Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)Sections I to VI: Examples of types of standardized fuses AS 60269.3.02005 Low-voltage fuses- Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) AS 60269.3.12005 Low-voltage fuses- Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)Sections I to IV: Examples of types of standardized fuses AS 60269.4.02005 Low-voltage fuses- Supplementary requirements for fuse-links for the protection of semiconductor devices AS 60269.4.12005 Low-voltage fuses- Supplementary requirements for fuse-links for the protection of semiconductor devicesSections I to IIIExamples of types of standardized fuselinks AS/NZS 60898.1:2004 Electrical accessoriesCircuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. operation (IEC 60898-1 Ed. 1.2 (2003) MOD) AS/NZS 60898.2:2004 Circuit-breakers for overcurrent protection for household and similar installationsCircuit-breakers for a.c. and d.c. operation (IEC 60898-2 Ed. 1.1 (2003) MOD) AS 60947.22005 Low-voltage switchgear and controlgearCircuitbreakers
318
SUBJECT INDEX
AS/NZS 60320.2.2:2004 Appliance couplers for household and similar general purposes- Interconnection couplers for household and similar equipment (IEC 60320-2-2, Ed. 2.0 (1998) MOD) AS/NZS 61535.1:2003 Installation couplersGeneral requirements Relays AS 1852.4461988 International electrotechnical vocabulary Electrical relays Switches AS 20241991 High voltage a.c. switchgear and controlgear Switch-fuse combinations AS/NZS 3127:2005 Approval and test specificationCord-line switches AS/NZS 3133:2008 Approval and test specificationAir-break switches AS/NZS 3161:2005 Approval and test specificationThermostats and energy regulators AS/NZS 3947.3:2001 Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fusecombination units AS/NZS 3947.3 Supplement 1:2001 Low-voltage switchgear and controlgearSwitches, disconnectors, switch-disconnectors and fuse-combination unitsFuse-switch-disconnectors and switchdisconnectors for use with low-voltage aerial bundled cables (Supplement to AS/NZS 3947.3:2001) AS/NZS 3947.5.3:2000 Low-voltage switchgear and controlgear Control circuit devices and switching elementsRequirements for proximity devices with define behaviour under fault conditions AS/NZS 3947.6.1:2001 Low-voltage switchgear and controlgear Multiple Function equipmentAutomatic transfer switching equipment AS 60214.22006 Tap-changersApplication guide AS/NZS 60265.1:2001 High-voltage switchesSwitches for rated voltages above 1 kV and less than 52 kV AS 60265.22005 High-voltage switchesHigh-voltage switches for rated voltages of 52kV and above (IEC60265-2, Ed.1.0(1988) MOD) AS 60947.12004 Low-voltage switchgear and controlgear General rules AS 60947.4.12004 Low-voltage switchgear and controlgear Contactors and motor-startersElectromechanical contactors and motor-starters AS 60947.5.22004 Low-voltage switchgear and controlgear Control circuit devices and switching elementsProximity switches AS 60947.6.22004 Low-voltage switchgear and controlgear Multiple function equipmentControl and protective switching devices (or equipment) (CPS) AS/NZS 61058.1:2008 Switches for appliancesGeneral requirements (IEC 61058-1, Ed. 3.1 (2000), MOD) ELECTRICAL AND ELECTRONIC TESTING AS 1931.11996 High-voltage test techniquesGeneral definitions and test requirements AS 1931.21996 High-voltage test techniquesMeasuring systems AS 28531986 EnclosuresTemperature-controlledPerformance testing and grading AS/NZS 3019:2007 Electrical installationsPeriodic verification AS 35471997 Breath alcohol testing devices for personal use AS/NZS 3551:2004 Technical management programs for medical devices AS/NZS 3760:2003 In-service safety inspection and testing of electrical equipment AS/NZS 3760:2001 In-service safety inspection and testing of electrical equipment AS 42781995 A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA) AS 4362.11996 High-voltage test techniques for low-voltage equipment Definitions, test and procedure requirements AS 4362.21996 High-voltage test techniques for low-voltage equipment Test equipment AS 43881996 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear AS/NZS 5761:2005 In-service safety inspection and testingSecond-hand electrical equipment prior to sale AS/NZS 5762:2005 In-service safety inspection and testingRepaired electrical equipment
AS 60060.32008 High-voltage test techniquesDefinitions and requirements for on-site testing AS 60076.42006 Power transformersGuide to the lightning impulse and switching impulse testingPower transformers and reactors AS/NZS 61000.4.15:2005 Electromagnetic compatibility (EMC)Testing and measurement techniquesFlickermeterFunction and design specifications AS 61083.12006 Instruments and software used for measurement in highvoltage impulse testsRequirements for instruments ELECTRICAL AND MAGNETIC MEASUREMENTS see ELECTRICITY. MAGNETISM. ELECTRICAL AND MAGNETIC MEASUREMENTS ELECTRICAL ENGINEERING IN GENERAL AS 1046.11978 Letter symbols for use in electrotechnologyGeneral AS 1102.1011989 Graphical symbols for electrotechnical documentation General information and general index AS/NZS 1102.102:1997 Graphical symbols for electrotechnical documentationSymbol elements, qualifying symbols and other symbols having general application AS/NZS 1102.106:1997 Graphical symbols for electrotechnical documentationProduction and conversion of electrical energy AS/NZS 1102.111:1997 Graphical symbols for electrotechnical documentationArchitectural and topographical installation plans and diagrams AS/NZS 1102.112:1995 Graphical symbols for electrotechnologyBinary logic elements AS/NZS 1102.113:1995 Graphical symbols for electrotechnologyAnalogue elements AS/NZS 1852.0:2000 International Electrotechnology Vocabulary Introduction and list of Parts of AS 1852 and IEC 60050 AS 2243.71991 Safety in laboratoriesElectrical aspects AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (H) Set:2008 AS/NZS 3000, Wiring Rules (Hardbound) + Electrical Standards + FREE T-shirt AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS/NZS 3014:2003 Electrical installationsElectric fences AS/NZS 3017:2007 Electrical installationsVerification guidelines AS/NZS 3018:2001 Electrical installationsDomestic installations AS/NZS 3019:2007 Electrical installationsPeriodic verification AS/NZS 3100:2002 Approval and test specificationGeneral requirements for electrical equipment AS/NZS 3760:2003 In-service safety inspection and testing of electrical equipment AS/NZS 3760:2001 In-service safety inspection and testing of electrical equipment AS 37681990 Guide to the effects of temperature on electrical equipment AS/NZS 3820:1998 Essential safety requirements for low voltage electrical equipment AS 40441992 Battery chargers for stationary batteries AS 4362.11996 High-voltage test techniques for low-voltage equipment Definitions, test and procedure requirements AS 4362.21996 High-voltage test techniques for low-voltage equipment Test equipment AS/NZS 4382:1996 Preparation of function charts for control systems AS/NZS 4383.1:1996 Preparation of documents used in electrotechnology General requirements AS/NZS 4383.2:1996 Preparation of documents used in electrotechnology Function-oriented diagrams AS/NZS 4383.3:1996 Preparation of documents used in electrotechnology Connection diagrams, tables and lists AS/NZS 4383.4:1998 Preparation of documents used in electrotechnology Location and installation documents AS/NZS 4417.1:2000 Marking of electrical products to indicate compliance with regulationsGeneral rules for use of the mark AS/NZS 4417.2:2001 Marking of electrical products to indicate compliance with regulationsSpecific requirements for electrical safety regulatory applications AS/NZS 4417.3:1996 Marking of electrical products to indicate compliance with regulationsSpecific requirements for electromagnetic compatibility regulatory applications AS/NZS 4417.4:1999 Marking of electrical products to indicate compliance with regulationsSpecific requirements for radio apparatus regulatory requirements AS/NZS 4703:2007 Electrical wiring in furniture
319
SUBJECT INDEX
AS 60068.2.642003 Environmental testingTestsTest Fh: Vibration, broad-band random (digital control) and guidance AS 60068.2.652003 Environmental testingTestsTest Fg: Vibration, acoustically induced AS 60068.2.692004 Environmental testingTestsTest Te: Soldering Solderability testing of electronic components for surface mount technology by the wetting balance method AS 60068.2.772004 Environmental testingTestsTest 77: Body strength and impact shock AS 60068.2.812004 Environmental testingTestsTest Ei: ShockShock response spectrum synthesis AS 60068.3.12003 Environmental testing- Background information Section one: Cold and dry heat tests AS 60068.3.1A2003 Environmental testing- Background information Section one: Cold and dry heat testsFirst supplement AS 60068.3.22003 Environmental testing- Background information Combined temperature/low air pressure tests AS 60068.3.32003 Environmental testing- Guidance: Seismic test methods for equipments AS 60068.3.42003 Environmental testing- Supporting documentation and guidanceDamp heat tests AS 60068.3.52003 Environmental testing- Supporting documentation and guidanceConfirmation of the performance of temperature chambers AS 60068.3.62003 Environmental testing- Supporting documentation and guidanceConfirmation of the performance of temperature/humidity chambers AS 60068.3.72003 Environmental testing- Supporting documentation and guidanceMeasurements in temperature chambers for tests A and B (with load) AS 60068.3.82004 Environmental testingSupporting documentation and guidanceSelecting amongst vibration tests AS 60068.42003 Environmental testing- Information for specification writersTest summaries AS 60068.5.22003 Environmental testing- Guide to drafting of test methodsTerms and definitions AS 603552004 An appraisal of the problems of accelerated testing for atmospheric corrosion AS 60417.12004 Graphical symbols for use on equipmentOverview and application AS 60417.2.12004 Graphical symbols for use on equipment- General application AS 60417.2.22004 Graphical symbols for use on equipment- Audiovisual equipment AS 60417.2.32004 Graphical symbols for use on equipment- Telephone and telecommunications AS 60417.2.42004 Graphical symbols for use on equipment- Maritime navigation AS 60417.2.52004 Graphical symbols for use on equipment- Home electric appliances AS 60417.2.62004 Graphical symbols for use on equipment- Medical equipment AS 60417.2.72004 Graphical symbols for use on equipment- Safety aspects AS/NZS 60695.1.1:2001 Fire hazard testingGuidance for assessing the fire hazard of electrotechnical productsGeneral guidelines (IEC 60695-11:1999, IDT) AS 60695.1.402006 Fire hazard testingGuidance for assessing the fire hazard of electrotechnical productsInsulating liquids AS/NZS 60695.2.10:2001 Fire hazard testingGlowing/hot wire based test methodsGlow-wire apparatus and common test procedure AS/NZS 60695.2.11:2001 Fire hazard testingGlowing/hot wire based test methodsGlow-wire flammability test method for end-products AS/NZS 60695.2.12:2001 Fire hazard testingGlowing/hot wire based test methodsGlow-wire flammability test method for materials AS/NZS 60695.2.13:2001 Fire hazard testingGlowing/hot wire based test methodsGlow-wire ignitability test method for materials AS 60695.42006 Fire hazard testingTerminology concerning fire tests for electrotechnical products AS 60695.5.12006 Fire hazard testingCorrosion damage effects of fire effluentGeneral guidance AS 60695.5.22006 Fire hazard testingCorrosion damage effects of fire effluentSummary and relevance of test methods AS 60695.5.32006 Fire hazard testingCorrosion damage effects of fire effluentLeakage-current and metal-loss test method AS 60695.6.12006 Fire hazard testingSmoke obscurationGeneral guidance
AS 47552007 Framework for demand response capabilities and supporting technologies for electrical products AS/NZS 4836:2001 Safe working on low-voltage electrical installations AS/NZS 4853:2000 Electrical hazards on metallic pipelines AS/NZS 5761:2005 In-service safety inspection and testingSecond-hand electrical equipment prior to sale AS/NZS 5762:2005 In-service safety inspection and testingRepaired electrical equipment AS 600382000 Standard voltages AS 60068.12003 Environmental testingGeneral and guidance AS 60068.2.12003 Environmental testingTestsTest A: Cold AS 60068.2.22003 Environmental testingTestsTest B: Dry heat AS 60068.2.52003 Environmental testingTestsTest Sa: Simulated solar radiation at ground level AS 60068.2.62003 Environmental testingTestsTest Fc: Vibration (sinusoidal) AS 60068.2.72003 Environmental testingTestsTest Ga and guidance: Acceleration, steady state AS 60068.2.92003 Environmental testingTestsGuidance for solar radiation testing AS 60068.2.102003 Environmental testingTestsTest J and guidance: Mould growth AS 60068.2.112003 Environmental testingTestsTest Ka: Salt mist AS 60068.2.132003 Environmental testingTestsTest M: Low air pressure AS 60068.2.142003 Environmental testingTestsTest N: Change of temperature AS 60068.2.172003 Environmental testingTestsTest Q: Sealing AS 60068.2.182003 Environmental testingTestsTest R and guidance: Water AS 60068.2.202004 Environmental testingTestsTest T: Soldering AS 60068.2.212004 Environmental testingTestsTest U: Robustness of terminations and integral mounting devices AS 60068.2.272003 Environmental testingTestsTest Ea and guidance: Shock AS 60068.2.292003 Environmental testingTestsTest Eb and guidance: Bump AS 60068.2.302003 Environmental testingTestsTest Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) AS 60068.2.312003 Environmental testingTestsTest Ec: Drop and topple, primarily for equiment-type specimens AS 60068.2.322003 Environmental testingTestsTest Ed: Free fall AS 60068.2.332003 Environmental testingTestsGuidance on change of temperature tests AS 60068.2.422004 Environmental testingTestsTest Kc: Sulphur dioxide test for contacts and connections AS 60068.2.432004 Environmental testingTestsTest Kd: Hydrogen sulphide test for contacts and connections AS 60068.2.442004 Environmental testingTestsGuidance on test T: Soldering AS 60068.2.462004 Environmental testingTestsGuidance to test Kd: Hydrogen sulphide test for contacts and connections AS 60068.2.492004 Environmental testingTestsGuidance to Test Kc: Sulphur dioxide test for contacts and connections AS 60068.2.512003 Environmental testingTestsTest Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and nonheat-dissipating specimens AS 60068.2.522003 Environmental testingTestsTest Kb: Salt mist, cyclic (sodium chloride solution) AS 60068.2.532003 Environmental testingTestsGuidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests AS 60068.2.542004 Environmental testingTestsTest Ta: Soldering Solderability testing by the wetting balance method AS 60068.2.552003 Environmental testingTestsTest Ee and guidance: Bounce AS 60068.2.572003 Environmental testingTestsTest Ff: VibrationTimehistory method AS 60068.2.582004 Environmental testingTestsTest Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) AS 60068.2.592003 Environmental testingTestsTest Fe: VibrationSine beat method AS 60068.2.602003 Environmental testingTestsTest Ke: Flowing mixed gas corrosion test AS 60068.2.612003 Environmental testingTestsTest Z/ABDM: Climate sequence
320
SUBJECT INDEX
AS 60695.6.22006 Fire hazard testing- Smoke obscurationSummary and relevance of test methods AS 60695.6.302006 Fire hazard testing- Guidance and test methods on the assessment of obscuration hazard of vision caused by smoke opacity from electrotechnical products involved in firesSmall scale static methodDetermination of smoke opacityDescription of the apparatus AS 60695.6.312006 Fire hazard testing- Smoke obscurationSmall-scale static testMaterials AS 60695.7.12006 Fire hazard testingToxicity of fire effluentGeneral guidance AS 60695.7.22006 Fire hazard testingToxicity of fire effluentSummary and relevance of test methods AS 60695.7.32006 Fire hazard testingToxicity of fire effluentUse and interpretation of test results AS 60695.7.502006 Fire hazard testingToxicity of fire effluentEstimation of toxic potencyApparatus and test method AS 60695.7.512006 Fire hazard testingToxicity of fire effluentEstimation of toxic potencyCalculation and interpretation of test results AS 60695.8.12006 Fire hazard testingHeat releaseGeneral guidance AS 60695.8.22006 Fire hazard testingHeat releaseSummary and relevance of test methods AS 60695.9.12006 Fire hazard testingSurface spread of flameGeneral guidance AS 60695.9.22006 Fire hazard testingSurface spread of flameSummary and relevance of test methods AS/NZS 60695.10.2:2004 Fire hazard testing- Abnormal heatBall pressure test AS 60695.10.32006 Fire hazard testingAbnormal heatMould stress relief distortion test AS/NZS 60695.11.2:2004 Fire hazard testingTest flames1 kW nominal pre-mixed flameApparatus, confirmatory test arrangement and guidance AS/NZS 60695.11.3:2004 Fire hazard testingTest flames500 W flames Apparatus and confirmational test methods AS/NZS 60695.11.4:2004 Fire hazard testingTest flames50 W flames Apparatus and confirmational test methods AS/NZS 60695.11.5:2005 Fire hazard testingTest flamesNeedle-flame test methodApparatus, confirmatory test arrangement and guidance AS/NZS 60695.11.10:2001 Fire hazard testingTest flames50 W horizontal and vertical flame test methods AS/NZS 60695.11.20:2001 Fire hazard testingTest flames500 W flame test methods AS 60695.11.212006 Fire hazard testingTest flames500 W vertical flame test method for tubular polymeric materials AS 60695.11.402006 Fire hazard testingTest flamesConfirmatory tests Guidance AS IEC 610142004 Programmes for reliability growth AS IEC 618822003 Hazard and operability studies (HAZOP studies) Application guide HB 3:1996 Electrical and electronic drawing practice for students HB 37.21993 Handbook of Australian fire StandardsElectrical equipment HB 207.42005 Environmental managementInclusion of environmental aspects in electrotechnical product standards HB 207.52005 Environmental managementIntegrating environmental aspects into design and development of electrotechnical products HB 3012001 Electrical installationsDesigning to the Wiring rules TR 61340.5.12005 ElectrostaticsProtection of electronic devices from electrostatic phenomenaGeneral requirements TR 61340.5.22005 ElectrostaticsProtection of electronic devices from electrostatic phenomenaUser guide ELECTRICAL EQUIPMENT FOR WORKING IN SPECIAL CONDITIONS Electrical apparatus for explosive atmospheres AS 1076.11977 Code of practice for the selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (Other than mining applications)Basic requirements AS 1076.71977 Code of practice for selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications)Apparatus with type of protection 'n'Non-sparking apparatus AS 1076.81977 Code of practice for selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications)Apparatus with type of protection 's'Special protection AS 12991993 Electrical equipment for coal minesFlameproof restrained plugs and receptacles
AS 13001989 Electrical equipment for coal minesBolted flameproof cable coupling devices AS 14821985 Electrical equipment for explosive atmospheres Protection by ventilationType of protection v AS/NZS 1826:2008 Electrical equipment for explosive gas atmospheresSpecial protectionType of protection 's' AS 19151992 Electrical equipment for explosive atmospheres Battery-operated vehicles AS/NZS 2081.1:2002 Electrical equipment for coal and shale minesElectrical protection devicesGeneral requirements AS/NZS 2081.2:2002 Electrical equipment for coal and shale minesElectrical protection devicesEarth-continuity monitoring devices AS/NZS 2081.3:2002 Electrical equipment for coal and shale minesElectrical protection devicesEarth-leakage protection systems for use on earth-fault current limited systems (IT systems) AS/NZS 2081.4:2002 Electrical equipment for coal and shale minesElectrical protection devicesLockout earth-fault protection devices AS/NZS 2081.5:2002 Electrical equipment for coal and shale minesElectrical protection devicesEarth-fault current limiters AS/NZS 2229:2004 Fuel dispensing equipment for explosive atmospheres AS/NZS 2290.1:2005 Electrical equipment for coal mines Introduction and maintenanceFor hazardous areas AS 2290.31990 Electrical equipment for coal minesMaintenance and overhaulMaintenance of gas detecting and monitoring equipment AS 2380.11989 Electrical equipment for explosive atmospheres Explosion-protection techniquesGeneral requirements AS 2380.41994 Electrical equipment for explosive atmospheres Explosion-protection techniquesPressurized rooms or pressurized enclosures AS/NZS 2381 Set:2008 Electrical equipment for explosive gas atmospheresSelection, installation and maintenance Set AS/NZS 2381.1:2005 Electrical equipment for explosive gas atmospheresSelection, installation and maintenanceGeneral requirements AS/NZS 2381.1:1999 Electrical equipment for explosive atmospheresSelection, installation and maintenanceGeneral requirements AS/NZS 2381.2:2006 Electrical equipment for explosive atmospheresSelection, installation and maintenanceFlameproof enclosure d AS 2381.21993 Electrical equipment for explosive atmospheres Selection, installation and maintenanceFlameproof enclosure d AS 2381.61993 Electrical equipment for explosive atmospheres Selection, installation and maintenanceIncreased safety e AS 2381.71989 Electrical equipment for explosive atmospheres Selection, installation and maintenanceIntrinsic safety i AS/NZS 2430.3.1:2004 Classification of hazardous areas Examples of area classificationGeneral AS/NZS 2430.3.2:2004 Classification of hazardous areas Examples of area classificationVehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangars AS/NZS 2430.3.3:2004 Classification of hazardous areas Examples of area classificationFlammable liquids AS/NZS 2430.3.4:2004 Classification of hazardous areas Examples of area classificationFlammable gases AS/NZS 2430.3.5:2004 Classification of hazardous areas Examples of area classificationRefineries and major processing plants AS/NZS 2430.3.6:2004 Classification of hazardous areas Examples of area classificationLaboratories, including fume cupboards and flammable medical agents AS/NZS 2430.3.7:2004 Classification of hazardous areas Examples of area classificationLandfill gas, sewage treatment and sewage pumping plants AS/NZS 2430.3.8:2004 Classification of hazardous areas Examples of area classificationSurface coatings and adhesives AS/NZS 2430.3.9:2004 Classification of hazardous areas Examples of area classificationMiscellaneous AS 3007 Set2007 Electrical installations for surface mines Set AS 3007.12004 Electrical installationsSurface mines and associated processing plantScope and definitions
321
SUBJECT INDEX
AS/NZS 60079.18:2005 Electrical apparatus for explosive gas atmospheresConstruction, test and marking of type of protection encapsulation m electrical apparatus AS/NZS 60079.20:2000 Electrical apparatus for explosive gas atmospheresData for flammable gases and vapours, relating to the use of electrical apparatus AS/NZS 60079.25:2004 Electrical apparatus for explosive gas atmospheresIntrinsically safe systems AS/NZS 60079.26:2007 Explosive atmospheresEquipment with equipment protection level (EPL) Ga AS/NZS 60079.27:2008 Explosive atmospheresFieldbus intrinsically safe concept (FISCO) AS/NZS 60079.28:2007 Explosive atmospheresProtection of equipment and transmission systems using optical radiation AS/NZS 60079.29.1:2008 Explosive atmospheresGas detectors Performance requirements of detectors for flammable gases AS/NZS 60079.29.2:2008 Explosive atmospheresGas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen AS/NZS 60079.30.1:2007 Explosive atmospheresElectrical resistance trace heatingGeneral and testing requirements AS/NZS 60079.30.2:2007 Explosive atmospheresElectrical resistance trace heatingApplication guide for design, installation and maintenance (IEC 60079-30-2, Ed. 1.0 (2007) MOD) AS/NZS 61241 Set:2008 Electrical apparatus for use in the presence of combustible dust Set AS/NZS 61241.0:2005 Electrical apparatus for use in the presence of combustible dustGeneral requirements AS/NZS 61241.1:2005 Electrical apparatus for use in the presence of combustible dustProtection by enclosures tD AS/NZS 61241.2.1:2000 Electrical apparatus for use in the presence of combustible dustTest methodsMethods for determining the minimum ignition temperatures of dust AS/NZS 61241.2.2:2000 Electrical apparatus for use in the presence of combustible dustTest methodsMethod for determining the electrical resistivity of dust in layers AS/NZS 61241.2.3:2000 Electrical apparatus for use in the presence of combustible dustTest methodsMethod for determining the minimum ignition energy of dust/air mixtures AS/NZS 61241.4:2002 Electrical apparatus for use in the presence of combustible dustType of protection 'pD' AS/NZS 61241.10:2005 Electrical apparatus for use in the presence of combustible dustClassification of areas where combustible dusts are or may be present AS/NZS 61241.11:2006 Electrical apparatus for use in the presence of combustible dustProtection by intrinsic safety iD AS/NZS 61241.14:2005 Electrical apparatus for use in the presence of combustible dustSelection and installation (IEC61241-14, Ed.1.0(2004) MOD) AS/NZS 61241.18:2005 Electrical apparatus for use in the presence of combustible dustProtection by encapsulation ' mD' AS/NZS 62013.1:2001 Caplights for use in mines susceptible to firedampGeneral requirementsConstruction and testing in relation to the risk of explosion AS/NZS 62013.2:2001 Caplights for use in mines susceptible to firedampPerformance and other safety-related matters MP 87.1:2008 Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) Product Certification ProgramBasic rules and procedures MP 87.2:2007 Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) Recognized Service Facilities ProgramBasic rules and procedures Electrical equipment for working in special conditions in general AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (H) Set:2008 AS/NZS 3000, Wiring Rules (Hardbound) + Electrical Standards + FREE T-shirt AS/NZS 3017:2007 Electrical installationsVerification guidelines AS/NZS 3019:2007 Electrical installationsPeriodic verification HB 132007 Electrical equipment for hazardous areas CS-EEHA-0011998 Electrical Equipment in Hazardous Areas Electrical installations for outdoor use AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (H) Set:2008 AS/NZS 3000, Wiring Rules (Hardbound) + Electrical Standards + FREE T-shirt
AS 3007.22004 Electrical installationsSurface mines and associated processing plantGeneral protection requirements AS 3007.32004 Electrical installationsSurface mines and associated processing plantGeneral requirements for equipment and ancillaries AS 3007.42004 Electrical installationsSurface mines and associated processing plantAdditional requirements for specific applications AS 3007.52004 Electrical installationsSurface mines and associated processing plantOperating requirements AS/NZS 3584.2:2008 Diesel engine systems for underground coal minesExplosion protected AS/NZS 3800:2005 Electrical equipment for explosive atmospheresRepair and overhaul AS/NZS 4114.1:2003 Spray painting booths, designated spray painting areas and paint mixing roomsDesign, construction and testing AS/NZS 4114.1:1995 Spray painting boothsDesign, construction and testing AS/NZS 4114.2:2003 Spray painting booths, designated spray painting areas and paint mixing roomsInstallation and maintenance AS/NZS 4641:2007 Electrical apparatus for detection of oxygen and other gases and vapours at toxic levelsGeneral requirements and test methods AS/NZS 4761.1:2008 Competencies for working with electrical equipment for hazardous areas (EEHA)Competency Standards AS/NZS 4761.2:2008 Competencies for working with electrical equipment for hazardous areas (EEHA)Guide to assessing competency AS/NZS 4871 Set:2007 Electrical equipment for underground coal mines Set AS/NZS 4871.1:2002 Electrical equipment for coal mines, for use undergroundGeneral requirements AS/NZS 4871.2:2002 Electrical equipment for coal mines, for use undergroundDistribution, control and auxiliary equipment AS/NZS 4871.3:2002 Electrical equipment for coal mines, for use undergroundSubstations AS/NZS 4871.4:2002 Electrical equipment for coal mines, for use undergroundMains powered electrical mobile machines AS/NZS 4871.5:2002 Electrical equipment for coal mines, for use undergroundBattery powered electrical mobile machines AS/NZS 4871.6:2007 Electrical equipment for coal mines, for use undergroundDiesel powered machinery and ancillary equipment AS/NZS 60079 Set:2008 Electrical apparatus for explosive gas atmospheres Set AS/NZS 60079.0:2008 Explosive atmospheresEquipment General requirements AS/NZS 60079.1:2007 Explosive atmospheresEquipment protection by flameproof enclosures d AS/NZS 60079.1.1:2002 Electrical apparatus for explosive gas atmospheresFlameproof enclosures 'd'Method of test for ascertainment of maximum experimental safe gap AS/NZS 60079.2:2007 Explosive atmospheresEquipment protection by pressurized enclosure p AS/NZS 60079.4:2000 Electrical apparatus for explosive gas atmospheresMethod of test for ignition temperature AS/NZS 60079.5:2007 Explosive atmospheresEquipment protection by powdered filling 'q' AS/NZS 60079.6:2007 Explosive atmospheresEquipment protection by oil immersion 'o' AS/NZS 60079.7:2006 Explosive atmospheresEquipment protection by increased safety 'e' AS/NZS 60079.10:2004 Electrical apparatus for explosive gas atmospheresClassification of hazardous areas (IEC 6007910:2002 MOD) AS/NZS 60079.11:2006 Explosive atmospheresEquipment protection by intrinsic safety i AS/NZS 60079.12:2000 Electrical apparatus for explosive gas atmospheresClassification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents AS/NZS 60079.15:2006 Electrical apparatus for explosive gas atmospheresConstruction, test and marking of type of protection, n electrical apparatus
322
SUBJECT INDEX
AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS/NZS 3001:2008 Electrical installationsTransportable structures and vehicles including their site supplies AS/NZS 3001:2001 Electrical installationsRelocatable premises (including caravans and tents) and their site installations AS/NZS 3002:2008 Electrical installationsShows and carnivals AS/NZS 3002:2002 Electrical installationsShows and carnivals AS/NZS 3004.1:2008 Electrical installationsMarinas and recreational boatsMarinas AS/NZS 3004.2:2008 Electrical installationsMarinas and recreational boatsRecreational boats installations AS 3007 Set2007 Electrical installations for surface mines Set AS 3007.12004 Electrical installationsSurface mines and associated processing plantScope and definitions AS 3007.22004 Electrical installationsSurface mines and associated processing plantGeneral protection requirements AS 3007.32004 Electrical installationsSurface mines and associated processing plantGeneral requirements for equipment and ancillaries AS 3007.42004 Electrical installationsSurface mines and associated processing plantAdditional requirements for specific applications AS 3007.52004 Electrical installationsSurface mines and associated processing plantOperating requirements AS/NZS 3012:2003 Electrical installationsConstruction and demolition sites AS/NZS 3017:2007 Electrical installationsVerification guidelines AS/NZS 3019:2007 Electrical installationsPeriodic verification AS 42431994 Additional requirements for enclosed switchgear and controlgear from 1 kV to 72.5 kV to be used in severe climatic conditions AS 60021999 Domestic electric meter enclosures ELECTRICAL WIRES AND CABLES AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (H) Set:2008 AS/NZS 3000, Wiring Rules (Hardbound) + Electrical Standards + FREE T-shirt AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS/NZS 3017:2007 Electrical installationsVerification guidelines Cables AS/NZS 1026:2004 Electric cablesImpregnated paper insulated For working voltages up to and including 19/33 (36) kV AS 10492000 Telecommunication cablesInsulation, sheath and jacket AS 1049.12008 Telecommunication cablesInsulation, sheath and jacketMaterials AS 1049.22008 Telecommunication cablesInsulation, sheath and jacketTest methods AS/NZS 1429.1:2006 Electric cablesPolymeric insulatedFor working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV AS/NZS 1429.2:1998 Electric cablesPolymeric insulatedFor working voltages above 19/33 (36) kV up to and including 76/132 (145) kV AS/NZS 1747:2003 Reeling, trailing and feeder cables used for miningRepair, testing and fitting of accessories AS/NZS 1802:2003 Electric cablesReeling and trailingFor underground coal mining purposes AS 1852.4611988 International electrotechnical vocabulary Electric cables AS/NZS 1972:2006 Electric cablesUnderground coal minesOther than reeling and trailing AS/NZS 1995:2003 Welding cables AS/NZS 2276.1:2004 Cables for traffic signal installationsMulticore power cables AS/NZS 2373:2003 Electric cablesTwisted pair for control and protection circuits AS/NZS 2802:2000 Electric cablesReeling and trailing for mining and general use (other than underground coal mining) AS/NZS 2893:2002 Electric cablesLead and lead alloy sheaths Composition AS/NZS 3008.1.1:1998 Electrical installationsSelection of cables Cables for alternating voltages up to and including 0.6/1 kV Typical Australian installation conditions
AS/NZS 3008.1.2:1998 Electrical installationsSelection of cables Cables for alternating voltages up to and including 0.6/1 kV Typical New Zealand installation conditions AS 31582004 Electric cablesGlass fibre insulatedFor working voltages up to and including 0.6/1 (1.2) kV AS/NZS 3166:1993 Approval and test specificationCables for high voltage luminous discharge tube installations AS/NZS 3191:2008 Electric flexible cords AS/NZS 3560.1:2000 Electric cablesCross-linked polyethylene insulatedAerial bundledFor working voltages up to and including 0.6/1(1.2)kVAluminium conductors AS/NZS 3560.2:2003 Electric cablesCross-linked polyethylene insulatedAerial bundledFor working voltages up to and including 0.6/1(1.2) kVCopper conductors AS/NZS 3599.1:2003 Electric cablesAerial bundledPolymeric insulatedVoltages 6.35/11(12) kV and 12.7/22(24) kVMetallic screened AS/NZS 3599.2:1999 Electric cablesAerial bundledPolymeric insulatedVoltages 6.35/11(12) kV and 12.7/22(24) kVNonmetallic screened AS 37661990 Mechanical fittings for low voltage aerial bundled cables AS/NZS 3808:2000 Insulating and sheathing materials for electric cables AS/NZS 3863:2002 Galvanized mild steel wire for armouring cables AS 3891.12008 Air navigationCables and their supporting structuresMarking and safety requirementsPermanent marking of overhead cables and their supporting structures for other than planned low-level flying AS 3891.22008 Air navigationCables and their supporting structuresMarking and safety requirementsMarking of overhead cables for planned low-level flying operations AS/NZS 4026:2008 Electric cablesFor underground residential distribution systems AS/NZS 4507:2006 CablesClassification of characteristics when exposed to fire AS 47022000 Polymeric cable protection covers AS/NZS 4805.1:2007 Accessories for electric cablesTest requirementsPower cables with extruded insulation for rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV AS/NZS 4805.2:2007 Accessories for electric cablesTest requirementsImpregnated paper-insulated metal-sheathed cables for rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV (excluding gas-pressure and oil-filled cables) AS/NZS 4961:2003 Electric cablesPolymeric insulatedFor distribution and service applications AS/NZS 5000.1:2005 Electric cablesPolymeric insulatedFor working voltages up to and including 0.6/1 (1.2) kV AS/NZS 5000.2:2006 Electric cablesPolymeric insulatedFor working voltages up to and including 450/750 V AS/NZS 5000.3:2003 Electric cablesPolymeric insulatedMulticore control cables AS/NZS 60227.5:2003 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 VFlexible cables (cords) AS/NZS 60245.4:2003 Rubber insulated cablesRated voltage up to and including 450/750 VCords and flexible cables AS/NZS 60702.1:2005 Mineral insulated cables and their terminations with a rated voltage not exceeding 750VCables AS/NZS 60702.2:2005 Mineral insulated cables and their terminations with a rated voltage not exceeding 750VTerminations AS/NZS 60840:2006 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV)Test methods and requirements Electrical wires and cables in general AS/NZS 1125:2001 Conductors in insulated electric cables and flexible cords AS/NZS 1660.1:1998 Test methods for electric cables, cords and conductorsConductors and metallic components AS/NZS 1660.2.1:1998 Test methods for electric cables, cords and conductorsInsulation, extruded semi-conductive screens and non-metallic sheathsMethods for general application AS/NZS 1660.2.2:1998 Test methods for electric cables, cords and conductorsInsulation, extruded semi-conductive screens and non-metallic sheathsMethods specific to elastomeric, XLPE and XLPVC materials
323
SUBJECT INDEX
General aspects see Electricity. Magnetism. General aspects Magnetism see Electricity. Magnetism. General aspects Measurement of electrical and magnetic quantities AS/NZS 1102.108:1997 Graphical symbols for electrotechnical documentationMeasuring instruments, lamps and signalling devices AS 1284.12004 Electricity meteringGeneral purpose induction watthour meters AS 1284.42006 Electricity meteringSocket mounting system AS 1284.10.22006 Electricity meteringData exchange for meter reading, tariff and load controlDirect local data exchange via hand-held unit (HHU)ANSI Standard interface AS 1284.111995 Electricity meteringSingle-phase multifunction watthour meters AS 1284.121995 Electricity meteringPolyphase multifunction (non-demand) watthour meters (Class 1) AS/NZS 1284.13:2002 Electricity meteringIn-service compliance testing AS 1852 (Pt 301, 302, 303)1988 International electrotechnical vocabulary AS 1852.3011988 International electrotechnical vocabulary General terms on measurements in electricity AS 1852.3021988 International electrotechnical vocabulary Electrical measuring instruments AS 1852.3031988 International electrotechnical vocabulary Electronic measuring instruments AS 1852.3211988 International electrotechnical vocabulary Instrument transformers AS 37202008 Measurement of power-frequency electric fields AS 38511991 The calculation of short-circuit currents in threephase a.c. systems AS 38651991 Calculation of the effects of short-circuit currents AS/NZS 4944:2006 Gas metersIn-service compliance testing AS 60044.12007 Instrument transformersCurrent transformers (IEC 60044-1 Ed.1.2 (2003) MOD) AS 600522005 Voltage measurement by means of standard air gaps AS 60060.32008 High-voltage test techniquesDefinitions and requirements for on-site testing AS 602702001 High-voltage test techniquesPartial discharge measurements AS 61010.12003 Safety requirements for electrical equipment for measurement, control and laboratory useGeneral requirements (IEC 61010-1:2001, MOD) AS 61010.2.0322004 Safety requirements for electrical equipment for measurement, control and laboratory use- Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement AS 61010.0312004 Safety requirements for electrical equipment for measurement, control and laboratory useSafety requirements for hand-held probe assemblies for electrical measurement and test (IEC61010-031:2002 MOD) AS 61083.12006 Instruments and software used for measurement in high-voltage impulse testsRequirements for instruments AS 61400.212006 Wind turbinesMeasurement and assessment of power quality characteristics of grid connected wind turbines AS 62052.112005 Electricity metering equipment (AC)General requirements, tests and test conditionsMetering equipment (IEC62052-11, Ed.1.0 (2003) MOD) AS 62052.212006 Electricity metering equipment (ac)General requirements, tests and test conditionsTariff and load control equipment (IEC62052-21, Ed. 1.0 (2004) MOD) AS 62053.212005 Electricity metering equipment (AC)Particular requirementsStatic meters for active energy (classes 1 and 2) (IEC 62053-21 Ed.1.0 (2003) MOD) AS 62053.222005 Electricity metering equipment (AC)Particular requirementsStatic meters for active energy (classes 0.2 S and 0.5 S) AS 62053.232006 Electricity metering equipment (ac)Particular requirementsStatic meters for reactive energy (classes 2 and 3) AS 62054.112006 Electricity metering (ac)Tariff and load control Particular requirements for electronic ripple control receivers AS 62056.212006 Electricity meteringData exchange for meter reading, tariff and load controlDirect local data exchange AS/NZS 62301:2005 Household electrical appliances Measurement of standby power (IEC62301, Ed. 1.0 (2005) MOD)
AS/NZS 1660.2.3:1998 Test methods for electric cables, cords and conductorsInsulation, extruded semi-conductive screens and non-metallic sheathsMethods specific to PVC and halogen free thermoplastic materials AS/NZS 1660.2.4:1998 Test methods for electric cables, cords and conductorsInsulation, extruded semi-conductive screens and non-metallic sheathsMethods specific to polyethylene and polypropylene materials AS/NZS 1660.2.5:1998 Test methods for electric cables, cords and conductorsInsulation, extruded semi-conductive screens and non-metallic sheathsMethods specific to cables above 1 kV AS/NZS 1660.3:1998 Test methods for electric cables, cords and conductorsElectrical tests AS/NZS 1660.4:1998 Test methods for electric cables, cords, and conductorsComplete cable and flexible cord AS/NZS 1660.5.1:2005 Test methods for electric cables, cords and conductorsFire testsTest for vertical flame spread of vertically-mounted bunched wires or cables AS/NZS 1660.5.2:2006 Test methods for electric cables, cords and conductorsFire testsMeasurement of smoke density of cables burning under defined conditions AS/NZS 1660.5.3:1998 Test methods for electric cables, cords and conductorsFire TestsDetermination of the amount of halogen acid gas evolved during the combustion of polymeric materials taken from cables AS/NZS 1660.5.4:1998 Test methods for electric cables, cords and conductorsFire testsDetermination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity AS/NZS 1660.5.5:2005 Test methods for electric cables, cords and conductors- Fire testsCircuit integrity AS/NZS 1660.5.6:2005 Test methods for electric cables, cords and conductorsFire testsTest for vertical flame propagation for a single insulated wire or cable AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS 39831991 Metal drums for insulated electric cables and bare conductors AS/NZS 4296:1995 Cable trunking systems Wires AS/NZS 1194.1:1996 Winding wiresEnamelled round copper winding wires AS/NZS 1194.2:1996 Winding wiresEnamelled rectangular copper winding wires AS/NZS 1194.3:1996 Winding wiresEnamelled round aluminium winding wires AS/NZS 1194.4:1996 Winding wiresEnamelled rectangular aluminium winding wires AS/NZS 1194.5:1996 Winding wiresTest methods AS 1222.11992 Steel conductors and staysBare overhead Galvanized (SC/GZ) AS 1222.21992 Steel conductors and staysBare overhead Aluminium clad (SC/AC) AS 15311991 ConductorsBare overheadAluminium and aluminium alloy AS/NZS 1574:1996 Copper and copper alloysWire for electrical purposes AS 17461991 ConductorsBare overheadHard-drawn copper AS/NZS 2269.0:2008 PlywoodStructuralSpecifications AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS/NZS 3439.2:2002 Low-voltage switchgear and controlgear assembliesParticular requirements for busbar trunking systems (busways) AS 36071989 ConductorsBare overhead, aluminium and aluminium alloySteel reinforced AS/NZS 3675:2002 ConductorsCovered overheadFor working voltages 6.35/11(12) kV up to and including 19/33(36) kV AS 38222002 Test methods for bare overhead conductors ELECTRICITY. MAGNETISM. ELECTRICAL AND MAGNETIC MEASUREMENTS Electricity. Magnetism. General aspects AS 1852.1311988 International electrotechnical vocabulary Electric and magnetic circuits AS 1852.1511988 International electrotechnical vocabulary Electric and magnetic devices AS/NZS 60990:2002 Methods of measurement of touch current and protective conductor current
324
SUBJECT INDEX
HB 1872006 Guide to selecting a safe multimeter IEC Report IEC ReportMagnetically induced currents in the human body Other standards related to electricity and magnetism TR 61340.5.12005 ElectrostaticsProtection of electronic devices from electrostatic phenomenaGeneral requirements TR 61340.5.22005 ElectrostaticsProtection of electronic devices from electrostatic phenomenaUser guide ELECTROMAGNETIC COMPATIBILITY (EMC) AS/NZS CISPR 14.2:2003 Electromagnetic compatibilityRequirements for household appliances electric tools and similar apparatusImmunity Product family standard AS/NZS CISPR 16.1.4:2004 (2nd Edition) Specification for radio disturbance and immunity measuring apparatus and methods- Radio disturbance and immunity measuring apparatusAncillary equipmentRadiated disturbances AS/NZS 4778:2001 Electromagnetic compatibility for radiocommunications equipment Electromagnetic compatibility in general AS/NZS CISPR 16.1.4:2004 (2nd Edition) Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatusAncillary equipmentRadiated disturbances AS/NZS CISPR 22:2006 Information technology equipmentRadio disturbance characteristicsLimits and methods of measurement AS 2362.71990 Automatic fire detection and alarm systems Methods of test for actuating devicesElectromagnetic interference test AS/NZS 3200.1.2:2005 Medical electrical equipmentGeneral requirements for safetyCollateral standard: Electromagnetic compatibilityRequirements and tests AS/NZS 3200.1.8:2005 Medical electrical equipmentGeneral requirements for safetyCollateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems AS/NZS 3696.21:2008 WheelchairsRequirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters AS/NZS 4417.3:1996 Marking of electrical products to indicate compliance with regulationsSpecific requirements for electromagnetic compatibility regulatory applications AS/NZS 4448:1997 Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles AS IEC 604372005 Radio interference test on high-voltage insulators AS/NZS 61000.1.1:2000 Electromagnetic compatibility (EMC) GeneralApplication and interpretation of fundamental definitions and terms AS/NZS 61000.2.2:2003 Electromagnetic compatibility (EMC) EnvironmentCompatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems AS/NZS 61000.2.3:1999 Electromagnetic compatibility (EMC) EnvironmentDescription of the environmentRadiated and non-network-frequency-related conducted phenomena AS/NZS 61000.2.5:1999 Electromagnetic compatibility (EMC) EnvironmentClassification of electromagnetic environments AS/NZS 61000.2.12:2003 Electromagnetic compatibility (EMC) EnvironmentCompatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems AS/NZS 61000.3.3:2006 Electromagnetic compatibility (EMC) LimitsLimitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current (16 A per phase and not subject to conditional connection (IEC 61000-3-3, Ed. 1.2(2005) MOD) AS/NZS 61000.3.5:1998 Electromagnetic compatibility (EMC) LimitsLimitation of voltage fluctuations and flicker in lowvoltage power supply systems for equipment with rated current greater than 16 A AS/NZS 61000.3.11:2002 Electromagnetic compatibility (EMC) LimitsLimitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systemsEquipment with rated current less than or equal to 75 A and subject to conditional connection
AS/NZS 61000.3.12:2006 Electromagnetic compatibility (EMC) LimitsLimits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and 75 A per phase AS/NZS 61000.4.1:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesOverview of IEC 610004 series AS/NZS 61000.4.2:2002 Electromagnetic compatibility (EMC) Testing and measurement techniquesElectrostatic discharge immunity test AS/NZS 61000.4.3:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesRadiated, radiofrequency, electromagnetic field immunity test AS/NZS 61000.4.4:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesElectrical fast transient/burst immunity test AS/NZS 61000.4.5:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesSurge immunity test AS/NZS 61000.4.6:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesImmunity to conducted disturbances, induced by radio-frequency fields AS/NZS 61000.4.7:2007 Electromagnetic compatibility (EMC) Testing and measurement techniquesGeneral guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto AS/NZS 61000.4.8:2002 Electromagnetic compatibility (EMC) Testing and measurement techniquesPower frequency magnetic field immunity test AS/NZS 61000.4.11:2005 Electromagnetic compatibility (EMC) Testing and measurement techniquesVoltage dips, short interruptions and voltage variations immunity tests (IEC61000-4-11, Ed.2.0(2004) MOD) AS/NZS 61000.4.13:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesHarmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests AS/NZS 61000.4.16:2002 Electromagnetic compatibility (EMC) Testing and measurement techniquesTest for immunity to conducted common mode disturbances in the frequency range 0 Hz to 150 kHz AS/NZS 61000.4.27:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesUnbalance, immunity test AS/NZS 61000.4.30:2007 Electromagnetic compatibility (EMC) Testing and measurement techniquesPower quality measurement methods AS/NZS 61000.6.1:2006 Electromagnetic compatibility (EMC) Generic standardsImmunity for residential, commercial and light-industrial environments AS/NZS 61000.6.2:2006 Electromagnetic compatibility (EMC) General standardsImmunity for industrial environments AS/NZS 61000.6.3:2007 Electromagnetic compatibility (EMC) Generic standardsEmission standard for residential, commercial and light-industrial environments AS/NZS 61000.6.4:2007 Electromagnetic compatibility (EMC) Generic standardsEmission standard for industrial environments AS 61800.12007 Adjustable speed electrical power drive systemsGeneral requirementsRating specifications for low voltage adjustable speed d.c. power drive systems AS 61800.22004 Adjustable speed electrical power drive systemsGeneral requirementsRating specifications for low voltage adjustable frequency a.c. power drive systems AS 61800.32005 Adjustable speed electrical power drive systemsEMC requirements and specific test methods AS 61800.42007 Adjustable speed electrical power drive systemsGeneral requirementsRating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV AS 61800.62007 Adjustable speed electrical power drive systemsGuide for determination of types of load duty and corresponding current ratings AS 62040.22008 Uninterruptible power systems (UPS) Electromagnetic compatibility (EMC) requirements AS 62040.32002 Uninterruptible power systems (UPS)Method of specifying the performance and test requirements AS 62310.22006 Static transfer systems (STS)Electromagnetic compatibility (EMC) requirements
325
SUBJECT INDEX
AS/NZS CISPR 16.2.4:2004 Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunityImmunity measurements AS/NZS CISPR 16.4.1:2006 Specification for radio disturbance and immunity measuring apparatus and methodsUncertainties, statistics and limit modellingUncertainties in standardized EMC tests AS/NZS CISPR 16.4.2:2004 Specification for radio disturbance and immunity measuring apparatus and methodsUncertainties, statistics and limit modellingUncertainty in EMC measurements AS/NZS CISPR 16.4.3:2004 (2nd Edition) Specification for radio disturbance and immunity measuring apparatus and methodsUncertainties, statistics and limit modellingStatistical considerations in the determination of EMC compliance of massproduced products AS/NZS CISPR 16.4.4:2004 Specification for radio disturbance and immunity measuring apparatus and methodsUncertainties, statistics and limit modellingStatistics of complaints and a model for the calculation of limits AS/NZS CISPR 20:2006 Sound and television broadcast receivers and associated equipmentImmunity characteristicsLimits and methods of measurement AS/NZS CISPR 22:2006 Information technology equipmentRadio disturbance characteristicsLimits and methods of measurement AS/NZS CISPR 24:2002 Information technology equipment Immunity characteristicsLimits and methods of measurement AS/NZS 4053:1997 Limits and methods of measurement of immunity characteristics of sound and television broadcast receivers and associated equipment AS 4294(Int)1995 AMPS receiver immunity to interfering signals employing amplitude modulation AS/NZS 61000.4.3:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesRadiated, radiofrequency, electromagnetic field immunity test AS/NZS 61000.4.4:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesElectrical fast transient/burst immunity test AS/NZS 61000.4.5:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesSurge immunity test AS/NZS 61000.4.6:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesImmunity to conducted disturbances, induced by radio-frequency fields AS/NZS 61000.4.13:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesHarmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests AS/NZS 61000.4.14:2007 Electromagnetic compatibility (EMC) Testing and measurement techniquesVoltage fluctuation immunity test AS/NZS 61000.4.27:2006 Electromagnetic compatibility (EMC) Testing and measurement techniquesUnbalance, immunity test AS/NZS 61000.4.34:2007 Electromagnetic compatibility (EMC) Testing and measurement techniquesVoltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase (IEC 61000-4-34, Ed. 1.0 (2005) MOD) AS/NZS 61000.6.1:2006 Electromagnetic compatibility (EMC) Generic standardsImmunity for residential, commercial and light-industrial environments AS/NZS 61000.6.2:2006 Electromagnetic compatibility (EMC) General standardsImmunity for industrial environments AS/NZS 61000.6.3:2007 Electromagnetic compatibility (EMC) Generic standardsEmission standard for residential, commercial and light-industrial environments AS/NZS 61000.6.4:2007 Electromagnetic compatibility (EMC) Generic standardsEmission standard for industrial environments Other aspects related to EMC AS/NZS CISPR 16.1.1:2006 Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatusMeasuring apparatus AS/NZS CISPR 16.1.2:2004 (2nd Edition) Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatusAncillary equipmentConducted disturbances
HB 881997 (CJC 2) Unbalanced high voltage power lines: Code of practice for the mitigation of noise induced into paired cable telecommunications lines from unbalanced high voltage power lines Emission AS/NZS CISPR 11:2004 (2nd Edition) Industrial scientific and medical (ISM) radio-frequency equipmentElectromagnetic disturbance characteristicsLimits and methods of measurement AS/NZS CISPR 12:2006 Vehicles, boats, and internal combustion engine driven devicesRadio disturbance characteristicsLimits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices AS/NZS CISPR 13:2004 Sound and television broadcast receivers and associated equipmentRadio disturbance characteristics Limits and methods of measurement AS/NZS CISPR 14.1:2003 Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatusEmission AS/NZS CISPR 15:2006 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment AS/NZS CISPR 22:2006 Information technology equipmentRadio disturbance characteristicsLimits and methods of measurement AS/NZS CISPR 25:2004 Radio disturbance characteristics for the protection of receivers used on board vehicles, boasts, and on devicesLimits and methods of measurement AS/NZS 2344:1997 Limits of electromagnetic interference from overhead a.c. powerlines and high voltage equipment installations in the frequency range 0.15 to 1000 MHz AS/NZS 2557:1999 Limits and methods of measurement of radio interference characteristics of vehicles, motor boats and sparkignited engine-driven devices AS 2909.41986 Methods of measurement on radio receivers for various classes of emissionRadio-frequency measurements on receivers for frequency-modulated sound-broadcasting emissions AS/NZS 4251.1:1999 Electromagnetic compatibility (EMC)Generic emission standardResidential, commercial and light industry AS/NZS 4251.2:1999 Electromagnetic compatibility (EMC)Generic emission standardIndustrial environments AS/NZS 61000.3.4:2007 Electromagnetic compatibility (EMC) LimitsLimitation of emission of harmonic currents in lowvoltage power supply systems for equipment with rated current greater than 75 A Immunity AS/NZS CISPR 16.1.1:2006 Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatusMeasuring apparatus AS/NZS CISPR 16.1.2:2004 (2nd Edition) Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatusAncillary equipmentConducted disturbances AS/NZS CISPR 16.1.3:2004 (2nd Edition) Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatusAncillary equipmentDisturbance power AS/NZS CISPR 16.1.4:2004 (2nd Edition) Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatusAncillary equipmentRadiated disturbances AS/NZS CISPR 16.1.5:2004 Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatusAntenna calibration test sites for 30 MHz to 1000 MHz AS/NZS CISPR 16.2.1:2006 Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunityConducted disturbance measurements AS/NZS CISPR 16.2.2:2006 Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunityMeasurement of disturbance power AS/NZS CISPR 16.2.3:2004 Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunityRadiated disturbance measurements
326
SUBJECT INDEX
AS/NZS CISPR 16.1.3:2004 (2nd Edition) Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatusAncillary equipmentDisturbance power AS/NZS CISPR 16.1.4:2004 (2nd Edition) Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatusAncillary equipmentRadiated disturbances AS/NZS CISPR 16.1.5:2004 Specification for radio disturbance and immunity measuring apparatus and methodsRadio disturbance and immunity measuring apparatusAntenna calibration test sites for 30 MHz to 1000 MHz AS/NZS CISPR 16.2.1:2006 Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunityConducted disturbance measurements AS/NZS CISPR 16.2.2:2006 Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunityMeasurement of disturbance power AS/NZS CISPR 16.2.3:2004 Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunityRadiated disturbance measurements AS/NZS CISPR 16.2.4:2004 Specification for radio disturbance and immunity measuring apparatus and methodsMethods of measurement of disturbances and immunityImmunity measurements AS/NZS CISPR 16.3:2004 Specification for radio disturbance and immunity measuring apparatus and methodsCISPR technical reports AS/NZS CISPR 16.4.1:2006 Specification for radio disturbance and immunity measuring apparatus and methodsUncertainties, statistics and limit modellingUncertainties in standardized EMC tests AS/NZS CISPR 16.4.2:2004 Specification for radio disturbance and immunity measuring apparatus and methodsUncertainties, statistics and limit modellingUncertainty in EMC measurements AS/NZS CISPR 16.4.3:2004 (2nd Edition) Specification for radio disturbance and immunity measuring apparatus and methodsUncertainties, statistics and limit modellingStatistical considerations in the determination of EMC compliance of massproduced products AS/NZS CISPR 16.4.4:2004 Specification for radio disturbance and immunity measuring apparatus and methodsUncertainties, statistics and limit modellingStatistics of complaints and a model for the calculation of limits AS/NZS 1052:1992 CISPR specification for radio interference measuring apparatus and measurement methods ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC AND TELECOMMUNICATIONS EQUIPMENT Connectors see Plug-and-socket devices. Connectors Electromechanical components in general AS 1852.5811979 International electrotechnical vocabulary Electromechanical components for electronic equipment Plug-and-socket devices. Connectors AS 46312005 Limited flexibility connectors for gas ELECTRONIC COMPONENT ASSEMBLIES AS 60068.2.212004 Environmental testingTestsTest U: Robustness of terminations and integral mounting devices ELECTRONIC COMPONENTS IN GENERAL AS 1046.21978 Letter symbols for use in electrotechnology Telecommunications and electronics AS 1046.31991 Letter symbols for use in electrotechnologyLogarithmic quantities and units AS/NZS 1102.104:1997 Graphical symbols for electrotechnical documentationBasic passive components AS/NZS 1852.0:2000 International Electrotechnology Vocabulary Introduction and list of Parts of AS 1852 and IEC 60050 AS 1852.5511983 International electrotechnical vocabularyPower electronics AS 25291982 Collection of reliability, availability and maintainability data for electronics and similar engineering use AS 25301982 Presentation of reliability data on electronic and similar components AS 37021989 Item designation in electrotechnology AS IEC 60300 (Set)2005 Dependability Management Set
AS IEC 60300.12004 Dependability managementDependability management systems AS IEC 60300.22005 Dependability managementGuidance for dependability programme management AS IEC 60300.3.12003 Dependability managementApplication guide Analysis techniques for dependabilityGuide on methodology AS IEC 60300.3.32005 Dependability managementApplication guideLife cycle costing AS IEC 60300.3.102004 Dependability managementApplication guide Maintainability AS IEC 60300.3.112004 Dependability managementApplication guide Reliability centred maintenance AS IEC 60300.3.122004 Dependability managementApplication guide Integrated logistic support AS IEC 60300.3.142005 Dependability managementApplication guide Maintenance and maintenance support AS 60417.12004 Graphical symbols for use on equipmentOverview and application AS 60417.2.12004 Graphical symbols for use on equipment- General application AS 60417.2.22004 Graphical symbols for use on equipment- Audiovisual equipment AS 60417.2.32004 Graphical symbols for use on equipment- Telephone and telecommunications AS 60417.2.42004 Graphical symbols for use on equipment- Maritime navigation AS 60417.2.52004 Graphical symbols for use on equipment- Home electric appliances AS 60417.2.62004 Graphical symbols for use on equipment- Medical equipment AS 60417.2.72004 Graphical symbols for use on equipment- Safety aspects AS 621032006 Electronic equipment for use in power installations HB 3:1996 Electrical and electronic drawing practice for students HB 207.42005 Environmental managementInclusion of environmental aspects in electrotechnical product standards HB 207.52005 Environmental managementIntegrating environmental aspects into design and development of electrotechnical products TR 61340.5.12005 ElectrostaticsProtection of electronic devices from electrostatic phenomenaGeneral requirements TR 61340.5.22005 ElectrostaticsProtection of electronic devices from electrostatic phenomenaUser guide ELECTRONIC TUBES AS 1852.5311975 International electrotechnical vocabularyElectronic tubes ELEMENTS OF BUILDINGS Ceilings. Floors. Stairs AS 16571992 Fixed platforms, walkways, stairways and ladders Design, construction and installation AS/NZS 2785:2000 Suspended ceilingsDesign and installation AS 29461991 Suspended ceilings, recessed luminaires and air diffusersInterface requirements for physical compatibility AS 41541993 General access floors (elevated floors) AS 4155.01993 Test methods for general access floors Introduction and list of methods AS 4155.11993 Test methods for general access floorsTest for concavity and convexity AS 4155.21993 Test methods for general access floorsTest for twist AS 4155.31993 Test methods for general access floorsTest for panel squareness AS 4155.41993 Test methods for general access floorsTest for the effect of temperature AS 4155.51993 Test methods for general access floorsTest for the effect of humidity AS 4155.61993 Test methods for general access floorsTest for floor resistance for electrostatic control AS 4155.71993 Test methods for general access floorsTest for 300 mm x 300 mm concentrated load AS 4155.81993 Test methods for general access floorsTest for 25 mm x 25 mm concentrated load AS 4155.91993 Test methods for general access floorsTest for ultimate test load (safety factor tests for concentrated load) AS 4155.101993 Test methods for general access floorsTest for dynamic soft body impact
327
ELEMENTS OF BUILDINGS
SUBJECT INDEX
AS/NZS 4256.3:1994 Plastic roof and wall cladding materialsGlass fibre reinforced polyester (GRP) AS/NZS 4256.4:1995 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) wall cladding boards AS/NZS 4256.5:1996 Plastic roof and wall cladding materials Polycarbonate AS/NZS 4257.0:1994 Plastic roof and wall cladding materials Methods of testGeneral introduction and list of methods AS/NZS 4257.1:1994 Plastic roof and wall cladding materials Methods of testDetermination of dimensional properties AS/NZS 4257.2:1994 Plastic roof and wall cladding materials Methods of testDetermination of dimensional stability at 60C AS/NZS 4257.3:1994 Plastic roof and wall cladding materials Methods of testDetermination of mass per unit area of sheet AS/NZS 4257.4:1994 Plastic roof and wall cladding materials Methods of testDetermination of diffuse light transmission AS/NZS 4257.5:1994 Plastic roof and wall cladding materials Methods of testDetermination of glass fibre content AS/NZS 4257.6:1994 Plastic roof and wall cladding materials Methods of testDetermination of impact resistance AS/NZS 4257.7:1994 Plastic roof and wall cladding materials Methods of testDetermination of colourfastness, light transmission and impact resistance following ultraviolet light exposure AS/NZS 4257.8:1994 Plastic roof and wall cladding materials Methods of testDetermination of residual styrene AS/NZS 4257.9:1995 Plastic roof and wall cladding materials Methods of testDetermination of transverse bending stiffness AS/NZS 4257.10:1997 Plastic roof and wall cladding materials Methods of testDetermination of surface distortion (oil canning) Fatades see Walls. Partitions. Fatades Floors see Ceilings. Floors. Stairs Other elements of buildings AS 42852007 Skylights Partitions see Walls. Partitions. Fatades Roofs AS 1562.11992 Design and installation of sheet roof and wall claddingMetal AS/NZS 1562.2:1999 Design and installation of sheet roof and wall claddingCorrugated fibre-reinforced cement AS 1562.32006 Design and installation of sheet roof and wall claddingPlastic AS/NZS 1562.3:1996 Design and installation of sheet roof and wall claddingPlastic AS 20501995 Installation of roof tiles AS/NZS 2179.1:1994 Specifications for rainwater goods, accessories and fastenersMetal shape or sheet rainwater goods, and metal accessories and fasteners AS 24241991 Plastics building sheetsGeneral installation requirements and design of roofing systems AS/NZS 3500 (Set):2003 Plumbing and drainage Set AS/NZS 3500.3:2003 Plumbing and drainageStormwater drainage AS 3500.3.11998 National plumbing and drainageStormwater drainagePerformance requirements AS/NZS 3500.3.2:1998 National plumbing and drainage Stormwater drainageAcceptable solutions AS/NZS 3500.5:2000 National Plumbing and DrainageDomestic installations AS 4040.01992 Methods of testing sheet roof and wall cladding Introduction, list of methods and general requirements AS 4040.11992 Methods of testing sheet roof and wall cladding Resistance to concentrated loads AS 4040.21992 Methods of testing sheet roof and wall cladding Resistance to wind pressures for non-cyclone regions AS 4040.31992 Methods of testing sheet roof and wall cladding Resistance to wind pressures for cyclone regions AS 4040.42006 Methods of testing sheet roof and wall cladding Resistance to impact (sandbag)Sheet roof materials AS/NZS 4040.4:1996 Methods of testing sheet roof and wall claddingResistance to impact (sandbag) for sheet roof materials AS/NZS 4040.5:1996 Methods of testing sheet roof and wall claddingResistance to impact (sandbag) for wall boards AS 4256.12006 Plastic roof and wall cladding materialsGeneral requirements AS 4256.22006 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) building sheets
AS 4155.111993 Test methods for general access floorsTest for dynamic rolling loads with the tread made from resinous polymer AS 4155.121993 Test methods for general access floorsTest for pedestal strength by concentrated vertical load AS 4155.131993 Test methods for general access floorsTest for pedestal free movement by horizontal load AS 4155.141993 Test methods for general access floorsTest for pedestal strength by horizontal moment AS 4786.22005 Timber flooringSanding and finishing Chimneys, shafts, ducts AS 45662005 Flue cowlsGas appliances AS 45672005 Twin wall metal fluesGas appliances AS/NZS 4798(Int):2005 Polyethylene maintenance shafts AS/NZS 4999:2006 PVC-U maintenance shafts Doors and windows AS 1735.111986 Lifts, escalators and moving walks (known as the SAA Lift Code)Fire-rated landing doors AS 1851.71984 Maintenance of fire protection equipmentFireresistant doorsets AS 19091984 Installation of timber doorsets AS 20471999 Windows in buildingsSelection and installation AS 2047.11996 Windows in buildingsSpecification for materials and performance AS 2047.21996 Windows in buildingsConstruction, installation and maintenance AS 26881984 Timber doors AS 26891984 Timber doorsets AS/NZS 3350.2.97:2000 Safety of household and similar electrical appliancesParticular requirementsDrives for rolling shutters, awnings, blinds and similar equipment (IEC60335-2-97:1998, MOD) AS 4420.01996 WindowsMethods of testGeneral introduction and list of methods AS 4420.11996 WindowsMethods of testTest sample, preparation for tests, and test sequence AS 4420.21996 WindowsMethods of testDeflection test AS 4420.31996 WindowsMethods of testOperating force test AS 4420.41996 WindowsMethods of testAir infiltration test AS 4420.51996 WindowsMethods of testWater penetration resistance test AS 4420.61996 WindowsMethods of testUltimate strength test AS/NZS 4504.0:1998 Domestic garage doorsMethods of test Introduction and list of methods AS/NZS 4504.1:1998 Domestic garage doorsMethods of testTest sample and preparation of wind pressure test AS/NZS 4504.2:1998 Domestic garage doorsMethods of test Wind pressure test AS/NZS 4504.3:1998 Domestic garage doorsMethods of test Durability cycle test AS/NZS 4505:1998 Domestic garage doors AS 50072007 Powered doors for pedestrian access and egress AS 50392008 Security screen doors and security window grilles AS 50402003 Installation of security screen doors and window grilles AS 50412003 Methods of testSecurity screen doors and window grilles AS/NZS 60335.2.95:2005 Household and similar electrical appliancesSafetyParticular requirements for drives for vertically moving garage doors for residential use AS/NZS 60335.2.97:2007 Household and similar electrical appliancesSafetyParticular requirements for drives for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97 Ed 2.1, IDT) AS/NZS 60335.2.103:2007 Household and similar electrical appliancesSafetyParticular requirements for drives for gates, doors and windows (IEC 60335-2-103: Ed 2, IDT) CD DOMESTIC2007 Domestic Building Standards CD Elements of buildings in general AS 3555.12003 Building elementsTesting and rating for intruder resistanceIntruder-resistant panels AS/NZS 4256.1:1994 Plastic roof and wall cladding materials General requirements AS/NZS 4256.2:1994 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) building sheets
328
SUBJECT INDEX
AS 4256.32006 Plastic roof and wall cladding materialsGlass fibre reinforced polyester (GRP) AS 4256.42006 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) wall cladding boards AS 4256.52006 Plastic roof and wall cladding materials Polycarbonate AS 45971999 Installation of roof slates and shingles (Noninterlocking type) AS/NZS 4994.1(Int):2004 Temporary roof edge protection for housing and residential buildingsGeneral requirements AS/NZS 4994.2(Int):2004 Temporary roof edge protection for housing and residential buildingsInstallation and dismantling AS/NZS 60335.2.83:2002 Household and similar electrical appliancesSafetyParticular requirements for heated gullies for roof drainage (IEC 60335-2-83:2001, IDT) HB 391997 Installation code for metal roof and wall cladding HB 114:1998 Guidelines for the design of eaves and box gutters Stairs see Ceilings. Floors. Stairs Walls. Partitions. Fatades AS 1562.11992 Design and installation of sheet roof and wall claddingMetal AS/NZS 1562.2:1999 Design and installation of sheet roof and wall claddingCorrugated fibre-reinforced cement AS 1562.32006 Design and installation of sheet roof and wall claddingPlastic AS/NZS 1562.3:1996 Design and installation of sheet roof and wall claddingPlastic AS 29211987 Unplasticized polyvinyl chloride (UPVC) wall claddingGeneral installation requirements AS 4040.01992 Methods of testing sheet roof and wall cladding Introduction, list of methods and general requirements AS 4040.11992 Methods of testing sheet roof and wall cladding Resistance to concentrated loads AS 4040.21992 Methods of testing sheet roof and wall cladding Resistance to wind pressures for non-cyclone regions AS 4040.31992 Methods of testing sheet roof and wall cladding Resistance to wind pressures for cyclone regions AS 4040.42006 Methods of testing sheet roof and wall cladding Resistance to impact (sandbag)Sheet roof materials AS/NZS 4040.4:1996 Methods of testing sheet roof and wall claddingResistance to impact (sandbag) for sheet roof materials AS/NZS 4040.5:1996 Methods of testing sheet roof and wall claddingResistance to impact (sandbag) for wall boards AS 4256.12006 Plastic roof and wall cladding materialsGeneral requirements AS 4256.22006 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) building sheets AS 4256.32006 Plastic roof and wall cladding materialsGlass fibre reinforced polyester (GRP) AS 4256.42006 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) wall cladding boards AS 4256.52006 Plastic roof and wall cladding materials Polycarbonate AS/NZS 4284:2008 Testing of building facades AS/NZS 4455.3:2008 Masonry units, pavers, flags and segmental retaining wall unitsSegmental retaining wall units ENERGY AND HEAT TRANSFER ENGINEERING AS 1056.11991 Storage water heatersGeneral requirements AS 1056.21985 Storage water heatersSpecific requirements for water heaters with single shells AS 1056.31991 Storage water heatersSpecific requirements for water heaters with composite shells AS/NZS 1056.4:1997 Storage water heatersDaily energy consumption calculations for electric types AS/NZS 1359.5:2000 Rotating electrical machinesGeneral requirements Three-phase cage induction motorsHigh efficiency and minimum energy performance standards requirements AS 17311983 Frozen food retail cabinets AS 1731.12003 Refrigerated display cabinetsTerms and definitions AS 1731.112003 Refrigerated display cabinetsInstallation, maintenance and user guide AS/NZS 2007.1:2005 Performance of household electrical appliances DishwashersMethods for measuring performance, energy and water consumption
AS/NZS 2007.1 Supplement 1:2001 Performance of household electrical appliancesDishwashersEnergy consumption and performanceTest materialSpinach 800 gm tin AS/NZS 2007.2:2005 Performance of household electrical appliances DishwashersEnergy efficiency labelling requirements AS/NZS 2040.1:2005 Performance of household electrical appliances Clothes washing machinesMethods for measuring performance, energy and water consumption AS/NZS 2040.1 Supplement 1:1998 Performance of household electrical appliancesClothes washing machinesEnergy consumption and performanceTest materialOther than drum-type detergent (Supplement to AS/NZS 2040.1:1998) AS/NZS 2040.1 Supplement 2:1998 Performance of household electrical appliancesClothes washing machinesEnergy consumption and performanceTest materialDrum-type detergent (Supplement to AS/NZS 2040.1:1998) AS/NZS 2040.2:2005 Performance of household electrical appliances Clothes washing machinesEnergy efficiency labelling requirements AS 2374.1.22003 Power transformers- Minimum Energy Performance Standard (MEPS) requirements for distribution transformers AS 2374.3.11992 Power transformersInsulation levels and dielectric testsExternal clearances in air AS/NZS 3823.1.1:1998 Performance of electrical appliancesAirconditioners and heat pumps- Test MethodsNon-ducted airconditioners and heat pumpsTesting and rating for performance AS/NZS 3823.1.2:2001 Performance of electrical appliancesAirconditioners and heat pumps- Test methodsDucted airconditioners and air-to-air heat pumpsTesting and rating for performance AS/NZS 3823.2:2005 Performance of electrical appliancesAirconditioners and heat pumpsEnergy labelling and minimum energy performance standard (MEPS) requirements AS/NZS 3823.3:2002 Performance of electrical appliancesAirconditioners and heat pumpsCalculation of performance for minimum energy performance standard (MEPS) requirements AS/NZS 4474.1:2007 Performance of household electrical appliances Refrigerating appliancesEnergy consumption and performance AS/NZS 4474.1:1997 Performance of household electrical appliances Refrigerating appliancesEnergy consumption and performance AS/NZS 4783.2:2002 Performance of electrical lighting equipmentBallasts for fluorescent lampsEnergy labelling and minimum energy performance standards requirements AS/NZS 4965.1:2008 Performance of close control airconditionersTesting for rating AS/NZS 4965.2:2008 Performance of close control airconditionersMinimum energy performance standard (MEPS) requirements ENERGY AND HEAT TRANSFER ENGINEERING IN GENERAL AS/NZS 4665.1:2005 Performance of external power suppliesTest method and energy performance mark AS/NZS 4665.2:2005 Performance of external power suppliesMinimum energy performance standard (MEPS) requirements AS/NZS 4879.1:2008 Performance of transformers and electronic step-down convertors for ELV lampsTest methodEnergy performance ENVIRONMENTAL PROTECTION AS 47072006 Chain of custody for certified wood and forest products AS 47082007 Forest managementEconomic, social, environmental and cultural criteria and requirements for wood production (known as The Australian Forestry Standard) AS 4708 Supplement 12007 The Australian Forestry StandardGuidance for medium and large native forest ownerships (Supplement 1 to AS 47082007) AS 4708 Supplement 22007 The Australian Forestry StandardGuidance for medium and large plantation forest ownerships (Supplement 2 to AS 47082007) AS 4708 Supplement 32007 The Australian Forestry StandardGuidance for small native forest and plantation ownerships (Supplement 3 to AS 47082007) AS 4828.22008 Degradability of plasticsMethods of testDetermination of brittle point in plastic film using a tensile elongation test AS 4828.42008 Degradability of plasticsMethods of testTest method for heat aging of degradable plastics AS ISO 148522005 Plastic materialsDetermination of the ultimate aerobic biodegradability in an aqueous mediumMethod by analysis of evolved carbon dioxide RUL FR.02007 Rulings to chain of custody Standard for certified wood and forest productsRulling 0: Introduction and list of rulings RUL FR.12007 Rulings to chain of custody Standard for certified wood and forest productsRuling 1: Output batch in the %in/%out system
329
ENVIRONMENTAL PROTECTION
SUBJECT INDEX
AS ISO 148522005 Plastic materialsDetermination of the ultimate aerobic biodegradability in an aqueous mediumMethod by analysis of evolved carbon dioxide AS/NZS ISO 19011:2003 Guidelines for quality and/or environmental management systems auditing HB 144:1999 Guidance for forestry organisations in the use of environmental management system standards HB 203:2006 Environmental risk managementPrinciples and process HB 2062004 Initial Environmental Review (IER) HB 207.3:2005 Environmental managementLife cycle impact assessmentExamples of application of ISO 14042 HB 207.42005 Environmental managementInclusion of environmental aspects in electrotechnical product standards HB 207.52005 Environmental managementIntegrating environmental aspects into design and development of electrotechnical products Pollution, pollution control and conservation AS 4828.22008 Degradability of plasticsMethods of test Determination of brittle point in plastic film using a tensile elongation test AS 4828.42008 Degradability of plasticsMethods of testTest method for heat aging of degradable plastics AS 4978.12006 Quantification, monitoring and reporting of greenhouse gases in forest projectsAfforestation and reforestation AS ISO 14064 Set2008 Greenhouse gases Set AS ISO 14064.12006 Greenhouse gasesSpecification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals AS ISO 14064.22006 Greenhouse gasesSpecification with guidance at the project level for quantification and reporting of greenhouse gas emission reductions and removal enhancements (ISO 14062-2:2006, MOD) AS ISO 14064.32006 Greenhouse gasesSpecification with guidance for the validation and verification of greenhouse gas assertions AS ISO 148522005 Plastic materialsDetermination of the ultimate aerobic biodegradability in an aqueous mediumMethod by analysis of evolved carbon dioxide REFRIGERATION AND AIRCONDITIONING SET 2007 Refrigeration and airconditioning Set HB 40 Set2005 Australian Refrigeration and Air-conditioning Code of Good Practice Set HB 40.12001 The Australian Refrigeration and Air-conditioning Code of Good PracticeReduction of emissions of fluorocarbon refrigerants in commercial and industrial refrigeration and airconditioning applications HB 40.22001 The Australian Refrigeration and Air-conditioning Code of Good PracticeReduction of emissions of fluorocarbons in residential air-conditioning applications HB 40.32001 The Australian Refrigeration and Air-conditioning Code of Good PracticeReduction of emissions of fluorocarbons in domestic refrigeration applications HB 2762004 A Guide to Good Practice for Energy Efficient Installation of Residential Heating, Cooling & Air Conditioning Plant & Equipment Product life-cycles AS/NZS 4536:1999 Life cycle costingAn application guide AS 4828.22008 Degradability of plasticsMethods of test Determination of brittle point in plastic film using a tensile elongation test AS 4828.42008 Degradability of plasticsMethods of testTest method for heat aging of degradable plastics AS/NZS ISO 14040:1998 Environmental managementLife cycle assessmentPrinciples and framework AS/NZS ISO 14041:1999 Environmental managementLife cycle assesmentGoal and scope definition and inventory analysis AS/NZS ISO 14042:2001 Environmental managementLife cycle assessmentLife cycle impact assessment AS/NZS ISO 14043:2001 Environmental managementLife cycle assessmentLife cycle interpretation AS ISO 140482003 Environmental managementLife cycle assessmentData documentation format AS ISO 148522005 Plastic materialsDetermination of the ultimate aerobic biodegradability in an aqueous mediumMethod by analysis of evolved carbon dioxide
RUL FR.22007 Rulings to chain of custody Standard for certified wood and wood productsRuling 2: Output batch in the %in/%out system Ecolabelling AS 4828.22008 Degradability of plasticsMethods of test Determination of brittle point in plastic film using a tensile elongation test AS 4828.42008 Degradability of plasticsMethods of testTest method for heat aging of degradable plastics AS/NZS ISO 14021:2000 Environmental labels and declarations Self-declared environmental claims (Type II environmental labelling) AS ISO 148522005 Plastic materialsDetermination of the ultimate aerobic biodegradability in an aqueous mediumMethod by analysis of evolved carbon dioxide HB 207.1:2000 Environmental managementEnvironmental labels and declarationsType III environmental declarations HB 207.2:2003 Environmental managementIntegrating environmental aspects into product design and development HB 207.3:2005 Environmental managementLife cycle impact assessmentExamples of application of ISO 14042 HB 207.42005 Environmental managementInclusion of environmental aspects in electrotechnical product standards HB 207.52005 Environmental managementIntegrating environmental aspects into design and development of electrotechnical products Environment and environmental protection in general AS 4828.22008 Degradability of plasticsMethods of test Determination of brittle point in plastic film using a tensile elongation test AS 4828.42008 Degradability of plasticsMethods of testTest method for heat aging of degradable plastics AS/NZS ISO 14040:1998 Environmental managementLife cycle assessmentPrinciples and framework AS ISO 148522005 Plastic materialsDetermination of the ultimate aerobic biodegradability in an aqueous mediumMethod by analysis of evolved carbon dioxide MANUFACTURING CD2006 Manufacturing Standards on CD HB 207.42005 Environmental managementInclusion of environmental aspects in electrotechnical product standards HB 207.52005 Environmental managementIntegrating environmental aspects into design and development of electrotechnical products Environmental impact assessment AS 4828.22008 Degradability of plasticsMethods of test Determination of brittle point in plastic film using a tensile elongation test AS 4828.42008 Degradability of plasticsMethods of testTest method for heat aging of degradable plastics AS ISO 148522005 Plastic materialsDetermination of the ultimate aerobic biodegradability in an aqueous mediumMethod by analysis of evolved carbon dioxide HB 1051998 Guide to pipeline risk assessment in accordance with AS 2885.1 Environmental management AS 4828.22008 Degradability of plasticsMethods of test Determination of brittle point in plastic film using a tensile elongation test AS 4828.42008 Degradability of plasticsMethods of testTest method for heat aging of degradable plastics AS/NZS 5911(Int):2005 General guidelines on the verification, validation and assurance of environmental and sustainability reports AS/NZS ISO 14000 Set:2005 Environmental Management Standards Set AS/NZS ISO 14000 Basic Set:2007 Environmental Management Basic Set AS/NZS ISO 14001:2004 Environmental management systems Requirements with guidance for use AS/NZS ISO 14004:2004 Environmental management systems General guidelines on principles, systems and support techniques AS/NZS ISO 14015:2003 Environmental management Environmental assessment of sites and organizations (EASO) AS/NZS ISO 14031:2000 Environmental management Environmental performance evaluationGuidelines AS ISO 140501999 Environmental managementVocabulary
330
SUBJECT INDEX
ENVIRONMENTAL TESTING AS 1157.11998 Methods of testing materials for resistance to fungal growthGeneral principles of testing AS 1157.21998 Methods of testing materials for resistance to fungal growthResistance of textiles to fungal growth AS 1157.31999 Methods of testing materials for resistance to fungal growthResistance of cordage and yarns to fungal growth AS 1157.41999 Methods of testing materials for resistance to fungal growthResistance of coated fabrics and electronic boards to fungal growth AS 1157.51998 Methods of testing materials for resistance to fungal growthResistance of timber to surface fungal growth AS 1157.61998 Methods of testing materials for resistance to fungal growthResistance of leather and wet 'blue' hides to fungal growth AS 1157.71999 Methods of testing materials for resistance to fungal growthResistance of papers and paper products to surface fungal growth AS 1157.101999 Methods of testing materials for resistance to fungal growthResistance of dried or cured adhesives and glues to fungal growth AS 1157.111999 Methods of testing materials for resistance to fungal growthResistance of rubbers and plastics to surface fungal growth AS 28531986 EnclosuresTemperature-controlledPerformance testing and grading AS 60068.12003 Environmental testingGeneral and guidance AS 60068.2.12003 Environmental testingTestsTest A: Cold AS 60068.2.22003 Environmental testingTestsTest B: Dry heat AS 60068.2.52003 Environmental testingTestsTest Sa: Simulated solar radiation at ground level AS 60068.2.62003 Environmental testingTestsTest Fc: Vibration (sinusoidal) AS 60068.2.72003 Environmental testingTestsTest Ga and guidance: Acceleration, steady state AS 60068.2.92003 Environmental testingTestsGuidance for solar radiation testing AS 60068.2.102003 Environmental testingTestsTest J and guidance: Mould growth AS 60068.2.112003 Environmental testingTestsTest Ka: Salt mist AS 60068.2.132003 Environmental testingTestsTest M: Low air pressure AS 60068.2.142003 Environmental testingTestsTest N: Change of temperature AS 60068.2.172003 Environmental testingTestsTest Q: Sealing AS 60068.2.182003 Environmental testingTestsTest R and guidance: Water AS 60068.2.202004 Environmental testingTestsTest T: Soldering AS 60068.2.212004 Environmental testingTestsTest U: Robustness of terminations and integral mounting devices AS 60068.2.272003 Environmental testingTestsTest Ea and guidance: Shock AS 60068.2.292003 Environmental testingTestsTest Eb and guidance: Bump AS 60068.2.302003 Environmental testingTestsTest Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) AS 60068.2.312003 Environmental testingTestsTest Ec: Drop and topple, primarily for equiment-type specimens AS 60068.2.322003 Environmental testingTestsTest Ed: Free fall AS 60068.2.332003 Environmental testingTestsGuidance on change of temperature tests AS 60068.2.382003 Environmental testingTestsTest Z/AD: Composite temperature/humidity cyclic test AS 60068.2.392003 Environmental testingTestsTest Z/AMD: Combined sequential cold, low air pressure and damp heat test AS 60068.2.402003 Environmental testingTestsTest Z/AM: Combined cold/low air pressure tests AS 60068.2.412003 Environmental testingTestsTest Z/BM: Combined dry heat/low air pressure tests AS 60068.2.422004 Environmental testingTestsTest Kc: Sulphur dioxide test for contacts and connections AS 60068.2.432004 Environmental testingTestsTest Kd: Hydrogen sulphide test for contacts and connections AS 60068.2.442004 Environmental testingTestsGuidance on test T: Soldering AS 60068.2.452003 Environmental testingTestsTest XA and guidance: Immersion in cleaning solvents AS 60068.2.462004 Environmental testingTestsGuidance to test Kd: Hydrogen sulphide test for contacts and connections
ENVIRONMENTAL TESTING
AS 60068.2.472003 Environmental testingTestsMounting of compounds, equipment and other articles for vibration, impact and similar dynamic tests AS 60068.2.482003 Environmental testingTestsGuidance on the application of the tests of AS 60068 to simulate the effects of storage AS 60068.2.492004 Environmental testingTestsGuidance to Test Kc: Sulphur dioxide test for contacts and connections AS 60068.2.502003 Environmental testingTestsTest Z/Afc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heatdissipating specimens AS 60068.2.512003 Environmental testingTestsTest Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and nonheat-dissipating specimens AS 60068.2.522003 Environmental testingTestsTest Kb: Salt mist, cyclic (sodium chloride solution) AS 60068.2.532003 Environmental testingTestsGuidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests AS 60068.2.542004 Environmental testingTestsTest Ta: Soldering Solderability testing by the wetting balance method AS 60068.2.552003 Environmental testingTestsTest Ee and guidance: Bounce AS 60068.2.572003 Environmental testingTestsTest Ff: VibrationTimehistory method AS 60068.2.582004 Environmental testingTestsTest Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) AS 60068.2.592003 Environmental testingTestsTest Fe: VibrationSine beat method AS 60068.2.602003 Environmental testingTestsTest Ke: Flowing mixed gas corrosion test AS 60068.2.612003 Environmental testingTestsTest Z/ABDM: Climate sequence AS 60068.2.642003 Environmental testingTestsTest Fh: Vibration, broad-band random (digital control) and guidance AS 60068.2.652003 Environmental testingTestsTest Fg: Vibration, acoustically induced AS 60068.2.662003 Environmental testingTestsTest Cx: Damp heat, steady state (unsaturated pressurized vapour) AS 60068.2.672003 Environmental testingTestsTest Cy: Damp heat, steady state accelerated test primarily intended for components AS 60068.2.682003 Environmental testingTestsTest L: Dust and sand AS 60068.2.692004 Environmental testingTestsTest Te: Soldering Solderability testing of electronic components for surface mount technology by the wetting balance method AS 60068.2.702003 Environmental testingTestsTest Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands AS 60068.2.742003 Environmental testingTestsTest Xc: Fluid contamination AS 60068.2.752003 Environmental testingTestsTest Eh: Hammer tests AS 60068.2.772004 Environmental testingTestsTest 77: Body strength and impact shock AS 60068.2.782003 Environmental testingTestsTest Cab: Damp heat, steady state AS 60068.2.812004 Environmental testingTestsTest Ei: ShockShock response spectrum synthesis AS 60068.3.12003 Environmental testing- Background information Section one: Cold and dry heat tests AS 60068.3.1A2003 Environmental testing- Background information Section one: Cold and dry heat testsFirst supplement AS 60068.3.22003 Environmental testing- Background information Combined temperature/low air pressure tests AS 60068.3.32003 Environmental testing- Guidance: Seismic test methods for equipments AS 60068.3.42003 Environmental testing- Supporting documentation and guidanceDamp heat tests AS 60068.3.52003 Environmental testing- Supporting documentation and guidanceConfirmation of the performance of temperature chambers AS 60068.3.62003 Environmental testing- Supporting documentation and guidanceConfirmation of the performance of temperature/humidity chambers AS 60068.3.72003 Environmental testing- Supporting documentation and guidanceMeasurements in temperature chambers for tests A and B (with load) AS 60068.3.82004 Environmental testingSupporting documentation and guidanceSelecting amongst vibration tests AS 60068.42003 Environmental testing- Information for specification writersTest summaries
331
SUBJECT INDEX
HB 295.3.222008 Product Safety FrameworkGaps and openingsLimb entrapment HB 295.3.222007 Product Safety FrameworkGaps and openingsLimb entrapment HB 295.3.232008 Product Safety FrameworkGaps and openingsHead entrapment and fall through hazard HB 295.3.232007 Product Safety FrameworkGaps and openingsHead entrapment and fall through hazard HB 295.3.242008 Product Safety FrameworkInformative and instructive material HB 295.3.252008 Product Safety FrameworkChoking from small parts HB 295.3.252007 Product Safety FrameworkChoking from small parts HB 295.3.262008 Product Safety FrameworkLatching and locking mechanisms HB 295.3.262007 Product Safety FrameworkLatching and locking mechanisms HB 295.3.272008 Product Safety FrameworkRequirements for toys HB 295.3.282008 Product Safety FrameworkClimbing hazards footholds HB 295.3.282007 Product Safety FrameworkClimbing hazards footholds HB 295.3.292008 Product Safety FrameworkAccessibility of a part or component HB 295.3.292007 Product Safety FrameworkAccessibility of a part or component EQUIPMENT FOR ENTERTAINMENT Camping equipment and camp-sites AS 26582008 LP GasPortable and mobile appliances AS 26582003 LP GasPortable and mobile appliances AS 45572004 Domestic outdoor gas barbecues Playgrounds AS 25551982 Supervised adventure playgroundsGuide to establishment and administration AS 3533.11997 Amusement rides and devicesDesign and construction AS 3533.1 Supplement 12003 Amusement rides and devices Design and constructionIntrinsic safety (Supplement to AS 3533.11997) AS 3533.21997 Amusement rides and devicesOperation and maintenance AS 3533.2 Supplement 11997 Amusement rides and devices Operation and maintenanceLogbook (Supplement to AS 3533.21997) AS 3533.4.12005 Amusement rides and devicesSpecific requirementsLand-borne inflatable devices AS 3533.4.32007 Amusement rides and devicesSpecific requirementsRoller coasters AS/NZS 4422:1996 Playground surfacingSpecifications, requirements and test method AS/NZS 4486.1:1997 Playgrounds and playground equipment Development, installation, inspection, maintenance and operation AS 4685 (Set)2004 Playground Equipment Safety Set AS 4685.12004 Playground equipmentGeneral safety requirements and test methods AS 4685.22004 Playground equipmentParticular safety requirements and test methods for swings AS 4685.32004 Playground equipmentParticular safety requirements and test methods for slides AS 4685.42004 Playground equipmentParticular safety requirements and test methods for runways AS 4685.52004 Playground equipmentParticular safety requirements and test methods for carousels AS 4685.62004 Playground equipmentParticular safety requirements and test methods for rocking equipment HB 295 (Set)2008 Product Safety Framework Set HB 295.12007 Product Safety FrameworkApplication guide HB 295.22007 Product Safety FrameworkHazard checklist HB 295.3.12008 Product Safety FrameworkVisual and tactile examination of components HB 295.3.12007 Product Safety FrameworkVisual and tactile examination of components HB 295.3.22008 Product Safety FrameworkHazardous sharp points HB 295.3.22007 Product Safety FrameworkHazardous sharp points HB 295.3.32008 Product Safety FrameworkHazardous sharp edges
AS 60068.5.22003 Environmental testing- Guide to drafting of test methodsTerms and definitions AS 603552004 An appraisal of the problems of accelerated testing for atmospheric corrosion EQUIPMENT FOR CHILDREN AS/NZS 2088:2000 Prams and strollersSafety requirements AS/NZS 2130:1998 Cots for day nursery, hospital and institutional use Safety requirements AS/NZS 2172:2003 Cots for household useSafety requirements AS/NZS 2172:1995 Cots for household useSafety requirements AS/NZS 2195:1999 Folding cotsSafety requirements AS/NZS 2394:1994 Conditioning equipment for the treatment of nocturnal enuresis (bedwetting) AS 24321991 Babies' dummies AS/NZS 3200.2.202:1996 Approval and test specificationMedical electrical equipmentParticular requirements for safetyInfant apnoea monitors for domestic use AS 42262008 Guidelines for safe housing design AS/NZS 4385:1996 Infants' rocking cradlesSafety requirements HB 136:2004 Safety aspectsGuidelines for child safety HB 295 (Set)2008 Product Safety Framework Set HB 295.12007 Product Safety FrameworkApplication guide HB 295.22007 Product Safety FrameworkHazard checklist HB 295.3.12008 Product Safety FrameworkVisual and tactile examination of components HB 295.3.12007 Product Safety FrameworkVisual and tactile examination of components HB 295.3.22008 Product Safety FrameworkHazardous sharp points HB 295.3.22007 Product Safety FrameworkHazardous sharp points HB 295.3.42008 Product Safety FrameworkRequirements for decoration HB 295.3.42007 Product Safety FrameworkRequirements for decoration HB 295.3.52008 Product Safety FrameworkProduct safety warning labels and markings HB 295.3.52007 Product Safety FrameworkProduct safety warning labels and markings HB 295.3.62008 Product Safety FrameworkScissoring, shearing and pinching HB 295.3.62007 Product Safety FrameworkScissoring, shearing and pinching HB 295.3.72008 Product Safety FrameworkSmall objectsRemoval of graspable components HB 295.3.72007 Product Safety FrameworkSmall objectsRemoval of graspable components HB 295.3.82008 Product Safety FrameworkVolatile compounds content HB 295.3.82007 Product Safety FrameworkVolatile compounds content HB 295.3.92008 Product Safety FrameworkFormaldehyde release HB 295.3.92007 Product Safety FrameworkFormaldehyde release HB 295.3.102008 Product Safety FrameworkRelease of Bisphenol A HB 295.3.102007 Product Safety FrameworkRelease of Bisphenol A HB 295.3.112008 Product Safety FrameworkRelease of chemicals Migration of certain elements HB 295.3.112007 Product Safety FrameworkRelease of chemicals Migration of certain elements HB 295.3.122008 Product Safety FrameworkRelease of N-Nitrosamines and N-Nitrosatables HB 295.3.122007 Product Safety FrameworkRelease of N-Nitrosamines and N-Nitrosatables HB 295.3.132008 Product Safety FrameworkRelease of nickel HB 295.3.132007 Product Safety FrameworkRelease of Nickel HB 295.3.172008 Product Safety FrameworkPhthalate content HB 295.3.172007 Product Safety FrameworkPhthalate content HB 295.3.182008 Product Safety FrameworkPackaging hazards HB 295.3.182007 Product Safety FrameworkPackaging hazards HB 295.3.192008 Product Safety FrameworkTrapsCords and elastics HB 295.3.192007 Product Safety FrameworkTrapsCords and elastics HB 295.3.202008 Product Safety FrameworkSnagging trapsProtrusions and gaps HB 295.3.202007 Product Safety FrameworkSnagging trapsProtrusions and gaps HB 295.3.212008 Product Safety FrameworkGaps and openingsFinger entrapment HB 295.3.212007 Product Safety FrameworkGaps and openingsFinger entrapment
332
SUBJECT INDEX
HB 295.3.32007 Product Safety FrameworkHazardous sharp edges HB 295.3.62008 Product Safety FrameworkScissoring, shearing and pinching HB 295.3.62007 Product Safety FrameworkScissoring, shearing and pinching HB 295.3.72008 Product Safety FrameworkSmall objects Removal of graspable components HB 295.3.72007 Product Safety FrameworkSmall objects Removal of graspable components HB 295.3.82008 Product Safety FrameworkVolatile compounds content HB 295.3.82007 Product Safety FrameworkVolatile compounds content HB 295.3.92008 Product Safety FrameworkFormaldehyde release HB 295.3.92007 Product Safety FrameworkFormaldehyde release HB 295.3.102008 Product Safety FrameworkRelease of Bisphenol A HB 295.3.102007 Product Safety FrameworkRelease of Bisphenol A HB 295.3.112008 Product Safety FrameworkRelease of chemicalsMigration of certain elements HB 295.3.112007 Product Safety FrameworkRelease of chemicalsMigration of certain elements HB 295.3.122008 Product Safety FrameworkRelease of NNitrosamines and N-Nitrosatables HB 295.3.122007 Product Safety FrameworkRelease of NNitrosamines and N-Nitrosatables HB 295.3.132008 Product Safety FrameworkRelease of nickel HB 295.3.132007 Product Safety FrameworkRelease of Nickel HB 295.3.252008 Product Safety FrameworkChoking from small parts HB 295.3.252007 Product Safety FrameworkChoking from small parts HB 295.3.282008 Product Safety FrameworkClimbing hazards footholds HB 295.3.292008 Product Safety FrameworkAccessibility of a part or component HB 295.3.292007 Product Safety FrameworkAccessibility of a part or component Theatre, stage and studio equipment AS/NZS 60598.2.17:2006 LuminairesParticular requirements Luminaires for stage lighting, television, film and photographic studios (outdoor and indoor)(IEC60598.2.17, Ed. 1.0 (1984) MOD) Toys AS 1647.21992 Children's toys (Safety requirements) Constructional requirements AS 19002002 Flotation aids for water familiarization and swimming tuition AS 19001991 Flotation toys and swimming aids for children AS 8124 Set2007 Safety of toys Set AS/NZS ISO 8124.1:2002 Safety of toysSafety aspects related to mechanical and physical properties (ISO 8124.1:2000, MOD) AS/NZS ISO 8124.2:2003 Safety of toysFlammability (ISO 8124.2:1994, MOD) AS/NZS ISO 8124.3:2003 Safety of toysMigration of certain elements AS 8124.42003 Safety of toysExperimental sets for chemistry and related activities AS 8124.52003 Safety of toysChemical toys (Sets) other than experimental sets AS 8124.72003 Safety of toysFinger paintsRequirements and test methods AS/NZS 8124.9:2008 Safety of toysOrganic chemical compoundsRequirements AS/NZS 8124.10:2008 Safety of toysOrganic chemical compoundsSample preparation and extraction AS/NZS 8124.11:2008 Safety of toysOrganic chemical compoundsMethods of analysis AS/NZS 61558.2.7:2008 Safety of power transformers, power supply units and similarParticular requirements for transformers and power supplies for toys AS/NZS 62115:2008 Electric ToysSafety
HB 295 (Set)2008 Product Safety Framework Set HB 295.12007 Product Safety FrameworkApplication guide HB 295.22007 Product Safety FrameworkHazard checklist HB 295.3.12008 Product Safety FrameworkVisual and tactile examination of components HB 295.3.12007 Product Safety FrameworkVisual and tactile examination of components HB 295.3.22008 Product Safety FrameworkHazardous sharp points HB 295.3.22007 Product Safety FrameworkHazardous sharp points HB 295.3.32008 Product Safety FrameworkHazardous sharp edges HB 295.3.32007 Product Safety FrameworkHazardous sharp edges HB 295.3.42008 Product Safety FrameworkRequirements for decoration HB 295.3.42007 Product Safety FrameworkRequirements for decoration HB 295.3.52008 Product Safety FrameworkProduct safety warning labels and markings HB 295.3.52007 Product Safety FrameworkProduct safety warning labels and markings HB 295.3.62008 Product Safety FrameworkScissoring, shearing and pinching HB 295.3.62007 Product Safety FrameworkScissoring, shearing and pinching HB 295.3.72008 Product Safety FrameworkSmall objects Removal of graspable components HB 295.3.72007 Product Safety FrameworkSmall objects Removal of graspable components HB 295.3.82008 Product Safety FrameworkVolatile compounds content HB 295.3.82007 Product Safety FrameworkVolatile compounds content HB 295.3.92008 Product Safety FrameworkFormaldehyde release HB 295.3.92007 Product Safety FrameworkFormaldehyde release HB 295.3.102008 Product Safety FrameworkRelease of Bisphenol A HB 295.3.102007 Product Safety FrameworkRelease of Bisphenol A HB 295.3.112008 Product Safety FrameworkRelease of chemicalsMigration of certain elements HB 295.3.112007 Product Safety FrameworkRelease of chemicalsMigration of certain elements HB 295.3.122008 Product Safety FrameworkRelease of NNitrosamines and N-Nitrosatables HB 295.3.122007 Product Safety FrameworkRelease of NNitrosamines and N-Nitrosatables HB 295.3.132008 Product Safety FrameworkRelease of nickel HB 295.3.132007 Product Safety FrameworkRelease of Nickel HB 295.3.172008 Product Safety FrameworkPhthalate content HB 295.3.172007 Product Safety FrameworkPhthalate content HB 295.3.182008 Product Safety FrameworkPackaging hazards HB 295.3.182007 Product Safety FrameworkPackaging hazards HB 295.3.192008 Product Safety FrameworkTrapsCords and elastics HB 295.3.192007 Product Safety FrameworkTrapsCords and elastics HB 295.3.202008 Product Safety FrameworkSnagging traps Protrusions and gaps HB 295.3.202007 Product Safety FrameworkSnagging traps Protrusions and gaps HB 295.3.212008 Product Safety FrameworkGaps and openingsFinger entrapment HB 295.3.212007 Product Safety FrameworkGaps and openingsFinger entrapment HB 295.3.222008 Product Safety FrameworkGaps and openingsLimb entrapment HB 295.3.222007 Product Safety FrameworkGaps and openingsLimb entrapment HB 295.3.232008 Product Safety FrameworkGaps and openingsHead entrapment and fall through hazard
333
SUBJECT INDEX
AS 4024.12022006 Safety of machineryGeneral principlesTechnical principles AS 4024.13012006 Safety of machineryRisk assessmentPrinciples of risk assessment AS 4024.14012006 Safety of machineryErgonomic principlesDesign principlesTerminology and general principles AS 4024.15012006 Safety of machineryDesign of safety related parts of control systemsGeneral principles for design AS 4024.16012006 Safety of machineryDesign of controls, interlocks and guardingGuardsGeneral requirements for the design and construction of fixed and movable guards AS 4024.16022006 Safety of machineryInterlocking devices associated with guardsPrinciples for design and selection AS 4024.16032006 Safety of machineryDesign of controls, interlocks and guardsPrevention of unexpected start-up AS 4024.16042006 Safety of machineryDesign of controls, interlocks and guardingEmergency stopPrinciples for design AS 4024.17012006 Safety of machineryHuman body measurements Basic human body measurements for technological design AS 4024.17022006 Safety of machineryHuman body measurements Principles for determining the dimensions required for openings for whole body access into machinery AS 4024.17032006 Safety of machineryPrinciples for determining the dimensions required for access openings AS 4024.17042006 Safety of machineryHuman body measurements Anthropometric data AS 4024.18012006 Safety of machinerySafety distances to prevent danger zones being reached by the upper limbs AS 4024.18022006 Safety of machinerySafety distances and safety gapsSafety distances to prevent danger zones being reached by the lower limbs AS 4024.18032006 Safety of machinerySafety distances and safety gapsMinimum gaps to prevent crushing of parts of the human body AS 4024.19012006 Safety of machineryDisplays, controls, actuators and signalsErgonomic requirements for the design of displays and control actuatorsGeneral principles for human interactions with displays and control actuators AS 4024.19022006 Safety of machineryDisplays, controls, actuators and signalsErgonomic requirements for the design of displays and control actuatorsDisplays AS 4024.19032006 Safety of machineryDisplays, controls, actuators and signalsErgonomic requirements for the design of displays and control actuatorsControl actuators AS 4024.19042006 Safety of machineryDisplays, controls, actuators and signalsIndication, marking and actuationRequirements for visual, auditory and tactile signals AS 4024.19052006 Safety of machineryDisplays, controls, actuators and signalsIndication, marking and actuationRequirements for marking AS/NZS 4395.1:1996 Information technologyKeyboard layouts for text and office systemsGeneral principles governing keyboard layouts AS/NZS 4395.2:1996 Information technologyKeyboard layouts for text and office systemsAlphanumeric section HB 591994 ErgonomicsThe human factorA practical approach to work systems design HB 1772003 ISO/TR 14105 Electronic imagingHuman and organizational for successful Electronic Image Management (EIM) implementation EXCAVATIONS see EARTHWORKS. EXCAVATIONS. FOUNDATION CONSTRUCTION. UNDERGROUND WORKS EXPLOSION PROTECTION AS 16812002 Safety requirements for electrically heated Type 1 ovens in which flammable volatiles can occur AS/NZS 1826:2008 Electrical equipment for explosive gas atmospheres Special protectionType of protection 's' AS 22681979 Electrostatic paint and powder sprayguns for explosive atmospheres AS/NZS 2381 Set:2008 Electrical equipment for explosive gas atmospheresSelection, installation and maintenance Set AS/NZS 2381.1:2005 Electrical equipment for explosive gas atmospheres Selection, installation and maintenanceGeneral requirements AS 2430.11987 Classification of hazardous areasExplosive gas atmospheres AS 2430.31991 Classification of hazardous areasSpecific occupancies AS/NZS 2430.3.1:2004 Classification of hazardous areasExamples of area classificationGeneral AS/NZS 2430.3.2:2004 Classification of hazardous areasExamples of area classificationVehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangars
HB 295.3.232007 Product Safety FrameworkGaps and openingsHead entrapment and fall through hazard HB 295.3.242008 Product Safety FrameworkInformative and instructive material HB 295.3.252008 Product Safety FrameworkChoking from small parts HB 295.3.252007 Product Safety FrameworkChoking from small parts HB 295.3.262008 Product Safety FrameworkLatching and locking mechanisms HB 295.3.262007 Product Safety FrameworkLatching and locking mechanisms HB 295.3.272008 Product Safety FrameworkRequirements for toys HB 295.3.272007 Product Safety FrameworkRequirements for toys EQUIPMENT FOR MANUAL HANDLING AS 1961.12004 Castors and wheelsVocabulary, symbols and multilingual terminology AS 1961.22004 Castors and wheelsTest methods and apparatus AS 1961.32004 Castors and wheelsCastors for furniture (ISO22879:2004, MOD) AS 1961.42004 Castors and wheelsCastors for furnitureCastors for swivel chairs AS 1961.52004 Castors and wheelsCastors for manually propelled equipment for institutional applications AS 1961.62004 Castors and wheelsHospital bed castors AS 1961.72004 Castors and wheelsApplications up to 1.1 m/s (4 km/h) AS 1961.82004 Castors and wheelsApplications over 1.1m/s (4km/h) and up to 4.4m/s (16km/h) EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES Other equipment for petroleum and natural gas industries AS 46462004 Gas appliance standardsDefinitions and calculations Volumetric equipment and measurements AS 26492007 Petroleum liquids and liquefied petroleum gases MeasurementStandard reference conditions AS 26511983 Liquid hydrocarbonsVolumetric measurement by turbine meter systems AS 26521983 Liquid hydrocarbonsVolumetric measurement by displacement meter systems other than dispensing pumps AS ISO 41242007 Liquid hydrocarbonsDynamic measurement Statistical control of volumetric metering systems AS 4250.11995 Liquid hydrocarbonsDynamic measurement Proving systems for volumetric metersGeneral principles AS 4250.21995 Liquid hydrocarbonsDynamic measurement Proving systems for volumetric metersPipe provers AS 4250.31995 Liquid hydrocarbonsDynamic measurement Proving systems for volumetric metersPulse interpolation techniques AS 4250.41995 Liquid hydrocarbonsDynamic measurement Proving systems for volumetric metersTemperature corrections in volumetric calibration by water transfer method AS 4250.51995 Liquid hydrocarbonsDynamic measurement Proving systems for volumetric metersDynamic measurement EQUIPMENT FOR PROCESSING OF MINERALS HB 2422007 High voltage mining equipment for use underground EQUIPMENT FOR THE CHEMICAL INDUSTRY Equipment for the chemical industry in general AS 26341983 Chemical plant equipment made from glass-fibre reinforced plastics (GRP) based on thermosetting resins EQUIPMENT FOR THE METALLURGICAL INDUSTRY AS 43142005 FoundingPatterns, pattern equipment and coreboxes for the production of sand moulds and sand cores ERGONOMICS AS 3590.11990 Screen-based workstationsVisual display units AS 3590.21990 Screen-based workstationsWorkstation furniture AS 3590.31990 Screen-based workstationsInput devices AS 37691990 Automatic teller machinesUser access AS 4024.12006 Series Safety of machinery AS 4024.11012006 Safety of machineryTerminologyTerms and definitions AS 4024.12012006 Safety of machineryGeneral principlesBasic terminology and methodology
334
SUBJECT INDEX
AS/NZS 2430.3.3:2004 Classification of hazardous areasExamples of area classificationFlammable liquids AS/NZS 2430.3.4:2004 Classification of hazardous areasExamples of area classificationFlammable gases AS/NZS 2430.3.5:2004 Classification of hazardous areasExamples of area classificationRefineries and major processing plants AS/NZS 2430.3.6:2004 Classification of hazardous areasExamples of area classificationLaboratories, including fume cupboards and flammable medical agents AS/NZS 2430.3.7:2004 Classification of hazardous areasExamples of area classificationLandfill gas, sewage treatment and sewage pumping plants AS/NZS 2430.3.8:2004 Classification of hazardous areasExamples of area classificationSurface coatings and adhesives AS/NZS 2430.3.9:2004 Classification of hazardous areasExamples of area classificationMiscellaneous AS/NZS 3800:2005 Electrical equipment for explosive atmospheresRepair and overhaul AS/NZS 4114.1:2003 Spray painting booths, designated spray painting areas and paint mixing roomsDesign, construction and testing AS/NZS 4114.1:1995 Spray painting boothsDesign, construction and testing AS/NZS 4114.2:2003 Spray painting booths, designated spray painting areas and paint mixing roomsInstallation and maintenance AS/NZS 4641:2007 Electrical apparatus for detection of oxygen and other gases and vapours at toxic levelsGeneral requirements and test methods AS 49792008 Flammable and combustible liquidsPrecautions against electrostatic ignition during tank vehicle loading AS/NZS 60079 Set:2008 Electrical apparatus for explosive gas atmospheres Set AS/NZS 60079.10:2004 Electrical apparatus for explosive gas atmospheresClassification of hazardous areas (IEC 60079-10:2002 MOD) AS/NZS 61241 Set:2008 Electrical apparatus for use in the presence of combustible dust Set HB 132007 Electrical equipment for hazardous areas EXTERNAL SEWAGE SYSTEMS AS 43102004 DN80 piston type vacuum interface valves for municipal sewer systems EXTERNAL STRUCTURES AS 1288 Set2006 Glass in buildings Set AS 12882006 Glass in buildingsSelection and installation AS 1288 Supplement 12006 Glass in buildingsSelection and installation (Supplement to AS 12882006) AS 1288 PLUS (CD) Set2006 Glass in buildings PLUS CD Set AS/NZS 1576.1:1995 ScaffoldingGeneral requirements AS 1576.21991 ScaffoldingCouplers and accessories AS/NZS 1576.3:1995 ScaffoldingPrefabricated and tube-and-coupler scaffolding AS 1576.41991 ScaffoldingSuspended scaffolding AS/NZS 1576.5:1995 ScaffoldingPrefabricated splitheads and trestles AS/NZS 1576.6:2000 ScaffoldingMetal tube-and-coupler scaffolding Deemed to comply with AS/NZS 1576.3 AS 17252003 Chain-link fabric security fencing and gates AS 1926 Set2007 Swimming pool safety Standards Set AS 1926.12007 Swimming pool safetySafety barriers for swimming pools AS 1926.11993 Swimming pool safetyFencing for swimming pools AS 1926.22007 Swimming pool safetyLocation of safety barriers for swimming pools AS 1926.21995 Swimming pool safetyLocation of fencing for private swimming pools AS 24232002 Coated steel wire fencing products for terrestrial, aquatic and general use AS 28201993 Gate units for private swimming pools AS/NZS 2890 (Set):2004 Parking Facilities Set AS/NZS 2890.1:2004 Parking facilitiesOff-street car parking AS 2890.11993 Parking facilitiesOff-street car parking AS 2890.22002 Parking facilitiesOff-street commercial vehicle facilities AS 2890.31993 Parking facilitiesBicycle parking facilities AS 2890.51993 Parking facilitiesOn-street parking AS/NZS 3014:2003 Electrical installationsElectric fences AS/NZS 3016:2002 Electrical installationsElectric security fences AS/NZS 3350.2.76:1998 Safety of household and similar electrical appliancesParticular requirementsElectric fence energizers AS 44251996 Above ground burial structures
AS/NZS 4576:1995 Guidelines for scaffolding AS/NZS 4676:2000 Structural design requirements for utility services poles AS/NZS 4677:2000 Steel utility services poles EXTRACTION AND PROCESSING OF PETROLEUM AND NATURAL GAS AS 45672005 Twin wall metal fluesGas appliances FANS see VENTILATORS. FANS. AIR-CONDITIONERS FARM BUILDINGS, STRUCTURES AND INSTALLATIONS Buildings and installations for processing and storage of agricultural produce AS 37291989 Farm silosDetermination of storage capacity AS 44642007 Hygienic production of wild game meat for human consumption AS 44641998 Hygienic production of game meat for human consumption AS 44652006 Construction of premises and hygienic production of poultry meat for human consumption AS 44652001 Construction of premises and hygienic production of poultry meat for human consumption AS 44661998 Hygienic production of rabbit meat for human consumption AS 44671998 Hygienic production of crocodile meat for human consumption AS 46962007 Hygienic production and transportation of meat and meat products for human consumption AS 46962002 The hygienic production and transportation of meat and meat products for human consumption AS 50082007 Hygienic rendering of animal products AS 50082001 Hygienic rendering of animal products AS 50102001 Hygienic production of ratite (emu/ostrich) meat for human consumption AS 50112001 Hygienic production of natural casings for human consumption Farm buildings and installations in general AS 28671986 Farm structuresGeneral requirements for structural design HB 8672007 Supplementary information for design of farm structures Livestock buildings, installations and equipment AS 10872003 Sodium hypochlorite solutions for use in the dairying industry AS 11622000 Cleaning and sanitizing dairy factory equipment AS 11871996 Farm milk cooling and storage systems AS 15362000 Cleaning and sanitizing milking equipment AS/NZS 2541:1998 Guide to the cleaning-in-place of dairy factory equipment AS/NZS 3350.2.76:1998 Safety of household and similar electrical appliancesParticular requirementsElectric fence energizers Other standards related to farm buildings and installations AS/NZS 60335.2.76:2003 Household and Similar Electrical AppliancesSafety- Particular requirements for electric fence energizers FARMING AND FORESTRY Farming and forestry in general AS 47072006 Chain of custody for certified wood and forest products AS 47082007 Forest managementEconomic, social, environmental and cultural criteria and requirements for wood production (known as The Australian Forestry Standard) AS 4708 Supplement 12007 The Australian Forestry Standard Guidance for medium and large native forest ownerships (Supplement 1 to AS 47082007) AS 4708 Supplement 22007 The Australian Forestry Standard Guidance for medium and large plantation forest ownerships (Supplement 2 to AS 47082007) AS 4708 Supplement 32007 The Australian Forestry Standard Guidance for small native forest and plantation ownerships (Supplement 3 to AS 47082007) AS 4978.12006 Quantification, monitoring and reporting of greenhouse gases in forest projectsAfforestation and reforestation HB 144:1999 Guidance for forestry organisations in the use of environmental management system standards RUL FR.02007 Rulings to chain of custody Standard for certified wood and forest productsRulling 0: Introduction and list of rulings
335
FASTENERS
SUBJECT INDEX
Fasteners in general AS 12141983 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) AS/NZS 1252:1996 High strength steel bolts with associated nuts and washers for structural engineering AS/NZS 1559:1997 Hot-dip galvanized steel bolts with associated nuts and washers for tower construction AS 16492001 TimberMethods of test for mechanical fasteners and connectorsBasic working loads and characteristic strengths AS/NZS 2451:1998 Bolts, screws and nuts with British Standard Whitworth threads (rationalized series) AS/NZS 2465:1999 Unified hexagon bolts, screws and nuts (UNC and UNF threads) AS 25281982 Bolts, studbolts and nuts for flanges and other high and low temperature applications AS 4291.12000 Mechanical properties of fasteners made of carbon steel and alloy steelBolts, screws and studs AS/NZS 4291.2:1995 Mechanical properties of fastenersNuts with specified proof load valuesCoarse thread AS 4291.52000 Mechanical properties of fasteners made of carbon steel and alloy steelSet screws and similar threaded fasteners not under tensile stresses AS 4291.72000 Mechanical properties of fasteners made of carbon steel and alloy steelTorsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm. AS 43972007 Electroplated coatings of zinc on steel fasteners with imperial threads AS B1081952 Black cup and countersunk bolts, nuts and washers AS B1481956 Unified black hexagon bolts, screws and nuts (UNC and UNF threads) and plain washersHeavy series AS B1931970 Hot-dip galvanized coating on fasteners (BSW and UNC threads) Nuts AS 1112.12000 ISO metric hexagon nutsStyle 1Product grades A and B AS 1112.22000 ISO metric hexagon nutsStyle 2Product grades A and B AS 1112.32000 ISO metric hexagon nutsProduct grade C AS 1112.42000 ISO metric hexagon nutsChamfered thin nuts Product grades A and B AS 50662002 Tolerances for ISO metric bolts, screws, studs and nutsProduct grades A, B and C AS B501960 Machine screws and machine screw nuts (BSW and BSF threads) Other fasteners AS/NZS 2699.1:2000 Built-in components for masonry constructionWall ties AS/NZS 2699.2:2000 Built-in components for masonry construction,Connectors and accessories AS/NZS 2699.3:2002 Built-in components for masonry constructionLintels and shelf angles (durability requirements) Pins, nails AS 12361973 Split cotter pins (metric series) AS 23341980 Steel nailsMetric series AS B941953 Solid and split taper pins AS B1751963 Split cotter pins Rivets AS A341938 Dimensions of rivets from 1/2 inch to 1-3/4 inches diameter (excluding rivets for boilers) AS B1181953 Dimensions of small rivets for general purposes AS B1451956 Large aluminium alloy rivets: 1/2 in. to 1 in. nominal diameters Washers, locking elements AS 1237.12002 Plain washers for metric bolts, screws and nuts for general purposesGeneral plan AS 1237.22002 Plain washers for metric bolts, screws and nuts for general purposesTolerances FASTENING OF CLOTHING see HEADGEAR. CLOTHING ACCESSORIES. FASTENING OF CLOTHING FERROALLOYS AS 3586.11994 FerroalloysSamplingParticulate alloys AS 3586.21997 FerroalloysSamplingMolten alloys AS 3586.31994 FerroalloysSamplingPreparation of samples
RUL FR.12007 Rulings to chain of custody Standard for certified wood and forest productsRuling 1: Output batch in the %in/%out system RUL FR.22007 Rulings to chain of custody Standard for certified wood and wood productsRuling 2: Output batch in the %in/%out system Landscaping and silviculture AS 48432001 Synthetic weed blocking fabric HB 294:2006 National Post-Border Weed Risk Management Protocol Plant growing AS 4689.12004 Fresh cut flowers and foliageAustralian and related floraGeneral and postharvest vase life requirements AS 4689.22004 Fresh cut flowers and foliageAustralian and related floraAnigozanthos (kangaroo paw) AS 4689.32004 Fresh cut flowers and foliageAustralian and related floraBanksia AS 4689.42004 Fresh cut flowers and foliageAustralian and related floraCaustis blakei (koala fern) AS 4689.52004 Fresh cut flowers and foliageAustralian and related floraChamelaucium (waxflower) AS 4689.62004 Fresh cut flowers and foliageAustralian and related floraOzothamnus diosmifolius syn. Helichrysum diosmifolium (rice flower) AS 4689.72004 Fresh cut flowers and foliageAustralian and related floraTelopea (waratah) HB 294:2006 National Post-Border Weed Risk Management Protocol FASTENERS Bolts, screws, studs AS 1110.12000 ISO metric hexagon bolts and screwsProduct grades A and BBolts AS 1110.22000 ISO metric hexagon bolts and screwsProduct grades A and BScrews AS 1111.12000 ISO metric hexagon bolts and screwsProduct grade CBolts AS 1111.22000 ISO metric hexagon bolts and screwsProduct grade CScrews AS/NZS 1390:1997 Cup head bolts with ISO metric coarse pitch threads AS/NZS 1393:1996 Coach screwsMetric series with ISO hexagon heads AS 14202008 ISO metric hexagon socket head cap screws AS/NZS 1421:1996 ISO metric hexagon socket set screws AS/NZS 1427:1996 ISO metric machine screws AS 14761974 Metric wood screws AS 3566.12002 Self-drilling screws for the building and construction industriesGeneral requirements and mechanical properties AS 3566.22002 Self-drilling screws for the building and construction industriesCorrosion resistance requirements AS/NZS 4402:1996 Hexagon head tapping screws AS/NZS 4403:1996 Slotted pan head tapping screws AS/NZS 4404:1996 Slotted countersunk (flat) head tapping screws (common head style) AS/NZS 4405:1996 Slotted raised countersunk (oval) head tapping screws (common head style) AS/NZS 4406:1996 Cross recessed pan head tapping screws AS/NZS 4407:1996 Cross recessed countersunk (flat) head tapping screws (common head style) AS/NZS 4408:1996 Cross recessed raised countersunk (oval) head tapping screws AS/NZS 4409:1996 Hexagon washer head tapping screws AS/NZS 4410:1996 Hexagon flange head tapping screws AS/NZS 4411:1996 Tapping screws thread AS/NZS 4412:1996 Heat-treated steel tapping screwsMechanical properties AS 50662002 Tolerances for ISO metric bolts, screws, studs and nutsProduct grades A, B and C AS B501960 Machine screws and machine screw nuts (BSW and BSF threads) AS B1941970 Tapping and metallic drive screws Clamps and staples AS 41811999 Stainless steel clamps for waterworks purposes
336
SUBJECT INDEX
AS 3586.41995 FerroalloysSamplingDetermination of quality variation, precision and bias AS 3587.31991 FerroalloysChemical analysisDetermination of chromium content of ferrochromium and ferrosilicochromium AS 3587.41998 FerroalloysChemical analysisDetermination of carbon contentInfrared method AS 3587.51998 FerroalloysChemical analysisDetermination of sulfur contentInfrared method AS 3587.61998 FerroalloysChemical analysisDetermination of phosphorus content- Spectrophotometric method AS 3830.11998 FerroalloysSpecificationsFerromanganese AS 3830.21998 FerroalloysSpecificationsFerrochromium AS 3830.31998 FerroalloysSpecificationsFerrosilicon AS 3830.41998 FerroalloysSpecificationsFerrosilicomanganese FERROUS METALS Ferrous metals in general AS/NZS 1050.1:1996 Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis AS/NZS 1050.2:1994 Methods for the analysis of iron and steel Determination of carbon content (gravimetric method) AS/NZS 1050.6:1995 Methods for the analysis of iron and steel Determination of tin contentFlame atomic absorption spectrometric method AS/NZS 1050.8:1994 Methods for the analysis of iron and steel Determination of manganese content (spectrophotometric method) AS 1050.121983 Methods for the analysis of iron and steel Determination of nitrogen in steel (steam distillation titrimetric method) AS/NZS 1050.14:1994 Methods for the analysis of iron and steel Determination of manganese in iron and steelTitrimetric method AS/NZS 1050.16:1994 Methods for the analysis of iron and steel Determination of sulfur contentInfrared absorption method after combustion in an induction furnace AS 1050.171988 Methods for the analysis of iron and steel Determination of copper contentSpectrophotometric method AS/NZS 1050.18:1994 Methods for the analysis of iron and steel Determination of phosphorusSpectrophotometric method AS 1050.191988 Methods for the analysis of iron and steel Determination of nickel contentSpectrophotometric method AS/NZS 1050.20:1994 Methods for the analysis of iron and steel Determination of magnesium content (flame atomic absorption spectrometric method) AS/NZS 1050.21:1994 Methods for the analysis of iron and steel Determination of cobalt content (spectrophotometric method) AS 1050.231990 Methods for the analysis of iron and steel Determination of molybdenum contentFlame atomic absorption spectrometric method AS/NZS 1050.24:1994 Methods for the analysis of iron and steel Determination of aluminium content (spectrophotometric method) AS 1050.251986 Methods for the analysis of iron and steel Determination of lead content (flame atomic absorption spectrometric method) AS/NZS 1050.26:1994 Methods for the analysis of iron and steel Silicon in iron and steelSpectrophotometric method AS/NZS 1050.27:1994 Methods for the analysis of iron and steel Determination of titanium content (spectrophotometric method) AS/NZS 1050.28:1994 Methods for the analysis of iron and steel Vanadium in steelPotentiometric method AS 1050.291989 Methods for the analysis of iron and steel Determination of cobalt contentFlame atomic absorption spectrometric method AS/NZS 1050.30:1994 Methods for the analysis of iron and steel Determination of boron contentCurcumin spectrophotometric method AS/NZS 1050.31:1994 Methods for the analysis of iron and steel Determination of niobium contentPAR spectrometric method AS/NZS 1050.32:1994 Methods for the analysis of iron and steel Determination of carbon contentInfrared method AS 1050.331988 Methods for the analysis of iron and steel Determination of nickel contentFlame atomic absorption spectrometric method AS/NZS 1050.37:1994 Methods for the analysis of iron and steel Determination of copper contentFlame atomic absorption spectrometric method
FERROUS METALS
AS/NZS 1050.38:1994 Methods for the analysis of iron and steel Determination of vanadium contentFlame atomic absorption spectrometric method AS/NZS 1050.39:1994 Methods for the analysis of iron and steel Determination of chromium contentFlame atomic absorption spectrometric method HB 121996 Metals Index HB 171996 Metals and alloysStandard terminology and nomenclature HB 110.11998 IMMA Handbook of Engineering MaterialsVolume 1: Metals Irons AS 18302007 Grey cast iron AS 18312007 Ductile cast iron AS 18322007 Malleable cast iron AS 20272007 Abrasive-resistant cast irons AS 50492002 Cast ironDesignation of microstructure of graphite AS 50522007 Compacted (vermicular) graphite cast irons Classification AS 50542007 Ausferritic spheroidal graphite cast irons Classification Steels MP 842000 Evolution Of Australian Standards for structural steel FIBRE OPTIC COMMUNICATIONS Fibre optic systems in general AS/NZS 2211.2:2006 Safety of laser productsSafety of optical fibre communication systems (OFCS) AS/NZS 2211.4:2002 Safety of laser productsLaser guards Fibres and cables AS/NZS ISO/IEC 14763.3:2007 Telecommunications installations Implementation and operation of customer premises cabling Testing of optical fibre cabling AS/NZS ISO/IEC 15018:2005 Information technologyGeneric cabling for homes AS/ACIF S008:2006 Requirements for customer cabling products AS/ACIF S009:2006 Installation requirements for customer cabling (Wiring Rules) FINANCES. BANKING. MONETARY SYSTEMS. INSURANCE AS 22771994 Paper for MICR encoded documents AS 37591990 Codes for the representation of currencies and funds AS 49372002 Electronic messages for exchange of claim and related information MP 532004 Personal financial planningPart 1: Definitions, processes and practices; Part 2: Requirements for competence of a Personal Financial Planner; Part 3: Ethics and experience FIRST AID AS 24881995 Resuscitators intended for use with humans AS 26751983 Portable first aid kits for use by consumers AS 42591995 Ancillary devices for expired air resuscitation AS 47752007 Emergency eyewash and shower equipment FISHING AND FISH BREEDING AS SSA 53002007 Australian Fish Names Standard FLEXIBLE DRIVES AND TRANSMISSIONS Belt drives and their components AS 16691992 Transmission beltingFrictioned surface AS 27842002 Endless wedge belt and V-belt drives FLUID POWER SYSTEMS Control components ATS 5200.4792006 Technical Specification for plumbing and drainage productsFlood stop safety valve ATS 5200.4812006 Technical Specification for plumbing and drainage productsThermal switching valves Cylinders AS 20191986 Fluid powerHydraulic and pneumatic cylinders Bore and rod dimensions AS 28212003 Fluid power systems and componentsCylinders Identification code for mounting dimensions and mounting types Filters, seals and contamination of fluids AS 4002.12001 Hydraulic fluid powerParticulate contamination of systemsMethod of coding the level of contamination AS 4002.22001 Hydraulic fluid powerParticulate contamination of systemsExtraction of fluid samples from an operating system
337
SUBJECT INDEX
AS 3848.21999 Filling of portable gas cylindersFilling of portable cylinders for self-contained underwater breathing apparatus (SCUBA) and non-underwater self-contained breathing apparatus (SCBA)Safe procedures AS 38732001 Pressure equipmentOperation and maintenance AS 38922001 Pressure equipmentInstallation AS 3920.11993 Assurance of product qualityPressure equipment manufacture AS 40371999 Pressure equipmentExamination and testing AS 42671995 Pressure regulators for use with industrial compressed gas cylinders AS 43432005 Pressure equipmentHazard levels AS 44581997 Pressure equipmentManufacture AS 44842004 Gas cylinders for industrial, scientific, medical and refrigerant useLabelling and colour coding AS 46172004 Manual shut off gas valves AS 47062001 Pressure gauges for regulators used with compressed gas cylinders AS 4774.22002 Work in compressed air and hyperbaric facilities Hyperbaric oxygen facilities AS 4955.12003 Transportable gas cylindersCompatibility of cylinder and valve materials with gas contentsMetallic materials AS 4955.22003 Transportable gas cylindersCompatibility of cylinder and valve materials with gas contentsNon-metallic materials (ISO 11114-2:2000, MOD) AS 4955.32003 Transportable gas cylindersCompatibility of cylinder and valve materials with gas contentsAutogenous ignition test in oxygen atmospheres MANUFACTURING CD2006 Manufacturing Standards on CD MP 482008 Certified gas cylinder test stations MP 76:1997 Pressure equipmentInspection bodies and personnel MP 882000 Evolution of Australian Standard for pressure vessel steel plate RUL PE.02002 Rulings to pressure equipment StandardsPart 0: Introduction and list of rulings RUL PE.12002 Rulings to pressure equipment StandardsRuling 1: Retention of backing strips in logitudinal joints in refrigeration vessels (Ruling to AS 1210) RUL PE.22002 Rulings to pressure equipment StandardsRuling 2: Nonconforming longitudinal joints in refrigeration vessels (Ruling to AS 1210) RUL PE.32002 Rulings to pressure equipment StandardsRuling 3: Internally fitted doors for beer tanks (Ruling to AS 1210) RUL PE.42002 Rulings to pressure equipment StandardsRuling 4: Pressure containers for paint (Ruling to AS 1210) RUL PE.52002 Rulings to pressure equipment StandardsRuling 5: Sugar processing vacuum pans and evaporatorsTubeplate design and tube fixing (Ruling to AS 1210) RUL PE.62002 Rulings to pressure equipment StandardsRuling 6: Fusion-welded chlorine transport drums (Ruling to AS 1210) RUL PE.72002 Rulings to pressure equipment StandardsRuling 7: Small safety valves (Ruling to AS 1271) RUL PE.82002 Rulings to pressure equipment StandardsRuling 8: Seamless copper pipe joined by brazing (Ruling to AS 4041) RUL PE.92002 Rulings to pressure equipment StandardsRuling 9: Design of pressure equipment using steel having bilateral thickness tolerances (Ruling to AS 1210 and AS 1548) RUL PE.102001 Rulings to pressure equipment StandardsRuling 10: Advanced design vesselsUse of joggled joints (Ruling to AS 1210 Supplement 11990) RUL PE.112001 Rulings to pressure equipment StandardsRuling 11: Advanced design vesselsDesign strength valves (Ruling to AS 1210 Supplement 11990) RUL PE.122004 Rulings to pressure equipment StandardsRuling 12: Minimum nominal thickness of pressure parts (AS 1210 1997) RUL PE.132004 Rulings to pressure equipment StandardsRuling 13: Specified minimum tensile strength of steel for buried and mounded storage vessels (AS 12101997) Stationary containers and tanks AS/NZS 1546.1:2008 On-site domestic wastewater treatment units Septic tanks AS/NZS 1546.1:1998 On-site domestic wastewater treatment units Septic tanks AS/NZS 1546.2:2008 On-site domestic wastewater treatment units Waterless composting toilets
Fluid power systems in general AS 26712002 Hydraulic fluid powerGeneral requirements for systems (ISO 4413:1998, MOD) AS 27882002 Pneumatic fluid powerGeneral requirements for systems (ISO 4414:1998, MOD) AS 40611992 Fluid power systems and componentsVocabulary Other fluid power system components AS 28421986 Fluid powerO-rings and housingsInch series, metric conversion AS 29741987 Fluid power systems and componentsMetric ports Dimensions and design Piping and couplings AS 5200.4582008 Plumbing and drainage productsUniversal plastic-bodied transition couplings ATS 5200.4582004 Technical Specification for plumbing and drainage productsUniversal transition fitting FLUID STORAGE DEVICES Cryogenic vessels AS 2809.62001 Road tank vehicles for dangerous goodsTankers for cryogenic liquids Fluid storage devices in general AS 28722000 Atmospheric heating of vessels containing fluids Estimation of maximum temperature AS 42891995 Oxygen and acetylene gas reticulation systems AS/NZS 4766:2006 Polyethylene storage tanks for water and chemicals Gas pressure vessels, gas cylinders AS/NZS 1200:2000 Pressure equipment AS/NZS 1200:1994 Pressure equipment AS 12101997 Pressure vessels AS 1210 Supplement 11990 Unfired Pressure VesselsAdvanced design and construction (Supplement to AS 12101997) AS 1210 Supplement 21999 Pressure vesselsCold-stretched austenitic stainless steel vessels (Supplement to AS 1210 1997) AS 15482008 Fine grained, weldable steel plates for pressure equipment AS 17772005 Aluminium cylinders for compressed gases Seamless0.1kg to 130kg AS 2030.11999 The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gasesCylinders for compressed gases other than acetylene AS 2030.21996 The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gasesCylinders for dissolved acetylene AS 2030.41985 The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gasesWelded cylindersInsulated AS 2337.12004 Gas cylinder test stationsGeneral requirements, inspection and testsGas cylinders AS 2337.22004 Gas cylinder test stationsLP Gas fuel vessels for automotive use AS 2337.32006 Gas cylinder test stationsTransportable gas cylindersPeriodic inspection and testing of composite gas cylinders (ISO 11623:2002, MOD) AS 24681989 Steel cylinders for compressed gasesBrazed0.1 kg to 11 kg AS 24692005 Steel cylinders for compressed gasesWelded twopiece construction0.1kg to 150kg AS 24702005 Steel cylinders for compressed gasesWelded three-piece construction with longitudinal joint11kg to 150kg AS 25272006 Cylinders for dissolved acetylene AS 25932004 BoilersSafety management and supervision systems AS 26132005 Safety devices for gas cylinders AS 27642002 Fibre reinforced plastics (FRP) aluminium alloy gas cylindersHoop overwrapped AS 28751995 Alloy steel cylinders for compressed gases Seamless0.1 kg to 500 kg AS 29712007 Serially produced pressure vessels AS 35772006 Steel cylinders for compressed gasesWelded150 kg to 500 kg AS/NZS 3788:2006 Pressure equipmentIn-service inspection AS 3848.11999 Filling of portable gas cylindersDecant filling of medical air and oxygen into portable cylindersSafe procedures
338
SUBJECT INDEX
AS/NZS 1546.2:2001 On-site domestic wastewater treatment units Waterless composting toilets AS/NZS 1546.3:2008 On-site domestic wastewater treatment units Aerated wastewater treatment systems AS/NZS 1546.3:2001 On-site domestic wastewater treatment units Aerated wastewater treatment systems AS/NZS 1547:2000 On-site domestic wastewater management AS 16922006 Steel tanks for flammable and combustible liquids AS 16921989 Tanks for flammable and combustible liquids AS 37352001 Concrete structures retaining liquids AS 3735 Supplement 12001 Concrete structures retaining liquids Commentary (Supplement to AS 37352001) AS/NZS 4766:2006 Polyethylene storage tanks for water and chemicals AS 49762008 The removal and disposal of underground petroleum storage tanks AS 49772008 Petroleum productsPipeline, road tanker compartment and underground tank identification ATS 5200.0262004 Technical Specification for plumbing and drainage productsCold water storage tanks HB 2302008 Rainwater Tank Design and Installation Handbook HB 2302006 Rainwater Tank Design and Installation Handbook Vessels and containers mounted on vehicles AS 2809.12008 Road tank vehicles for dangerous goodsGeneral requirements for all road tank vehicles AS 2809.22008 Road tank vehicles for dangerous goodsRoad tank vehicles for flammable liquids AS 2809.32008 Road tank vehicles for dangerous goodsRoad tank vehicles for compressed liquefied gases AS 2809.42001 Road tank vehicles for dangerous goodsTankers for toxic and corrosive cargoes AS 2809.52001 Road tank vehicles for dangerous goodsTankers for bitumen-based products AS 2809.62001 Road tank vehicles for dangerous goodsTankers for cryogenic liquids AS/NZS 3509:2003 LP Gas fuel vessels for automotive use AS/NZS 4481:1997 Pressure equipmentCompetencies of inspectors FOOD ADDITIVES see SPICES AND CONDIMENTS. FOOD ADDITIVES FOOD PRODUCTS IN GENERAL AS 46942007 Glycemic index of foods FOUNDATION CONSTRUCTION see EARTHWORKS. EXCAVATIONS. FOUNDATION CONSTRUCTION. UNDERGROUND WORKS FREIGHT DISTRIBUTION OF GOODS Complete, filled transport packages AS 2582.12003 Complete, filled transport packagesMethods of testIdentification of parts when testing AS 2582.22003 Complete, filled transport packagesMethods of testConditioning for testing AS 2582.32003 Complete, filled transport packagesMethods of testStacking tests using a static load AS 2582.42003 Complete, filled transport packagesMethods of testVertical impact test by dropping AS 2582.52003 Complete, filled transport packagesMethods of testHorizontal impact tests AS 2582.62003 Complete, filled transport packagesMethods of testVibration test at fixed low frequency AS 2582.72003 Complete, filled transport packagesMethods of testLow pressure test AS 2582.82003 Complete, filled transport packagesMethods of testInternal hydraulic pressure test AS 2582.92003 Complete, filled transport packagesMethods of testLeakage test AS 2582.102003 Complete, filled transport packagesMethods of testCompression and stacking tests using a compression tester AS 2582.112003 Complete, filled transport packagesMethods of testSinusoidal vibration tests using a variable frequency AS 2582.122006 Complete, filled transport packagesMethods of testWater-spray test AS 2582.132006 Complete, filled transport packagesMethods of testRolling test AS 2582.142006 Complete, filled transport packagesMethods of testWater immersion test AS 2582.152006 Complete, filled transport packagesMethods of testToppling test
FOOD ADDITIVES
AS 2582.162006 Complete, filled transport packagesMethods of testStability testing of unit loads AS 2582.172006 Complete, filled transport packagesMethods of testVertical random vibration test Freight distribution of goods in general AS 49822003 Thermal performance of refrigerated transport equipmentSpecification and testing General purpose containers AS 23611990 Freight containersAutomatic identification Operating parameters AS 3711.12000 Freight containersClassification, dimensions and ratings AS/NZS 3711.2:1993 Freight containersTerminology AS/NZS 3711.3:1993 Freight containersCorner fittings AS/NZS 3711.4:1993 Freight containersGeneral purpose containers AS 3711.52000 Freight containersThermal containers AS 3711.62000 Freight containersTank containers AS/NZS 3711.7:1993 Freight containersDry bulk containers AS 3711.82000 Freight containersPlatform containers AS 3711.92000 Freight containersCoding, identification and marking AS 3711.102000 Freight containersHandling and securing AS 4615.12000 Series R freight containersRequirements for container compliance AS 4615.22000 Series R freight containersPlatform and platformbased containers General purpose pallets AS 40681993 Flat pallets for materials handling AS 47622000 General-purpose flat palletsPrincipal dimensions and tolerances (International pallet sizes) FUELS Gaseous fuels AS 46462004 Gas appliance standardsDefinitions and calculations AS 47322002 LP Gas fuel systems for marine engines Liquid fuels AS 35701998 Automotive diesel fuel Solid fuels AS 1038.12001 Coal and cokeAnalysis and testingHigher rank coalTotal moisture AS 1038.22006 Coal and cokeAnalysis and testingCokeTotal moisture AS 1038.42006 Coal and cokeAnalysis and testingCoke Proximate analysis AS 1038.8.11999 Coal and cokeAnalysis and testingCoal and cokeChlorineEschka method AS 1038.8.22003 Coal and cokeAnalysis and testingCoal and cokeChlorineHigh-temperature combustion method AS 1038.9.12000 Coal and cokeAnalysis and testingHigher rank coal and cokePhosphorusAsh digestion/molybdenum blue method AS 1038.9.32000 Coal and cokeAnalysis and testingCoal and cokePhosphorusAsh digestion/phosphomolybdovanate method AS 1038.10.12003 Coal and cokeAnalysis and testing Determination of trace elementsCoal, coke and fly-ash Determination of eleven trace elementsFlame atomic absorption spectrometric method AS 1038.10.21998 Coal and cokeAnalysis and testing Determination of trace elementsCoal and cokeDetermination of arsenic, antimony and seleniumHydride generation method AS 1038.10.31998 Coal and cokeAnalysis and testing Determination of trace elementsCoal and cokeDetermination of boron contentICP-AES method AS 1038.10.42001 Coal and cokeAnalysis and testing Determination of trace elementsCoal, coke and fly-ash Determination of fluorine contentPyrohydrolysis method AS 1038.12.21999 Coal and cokeAnalysis and testingHigher rank coalCaking and coking propertiesDetermination of GrayKing coke type AS 1038.131990 Coal and cokeAnalysis and testingTests specific to coke AS 1038.14.12003 Coal and cokeAnalysis and testingHigher rank coal ash and coke ashMajor and minor elementsBorate fusion/flame atomic absorption spectrometric method
339
FURNITURE
SUBJECT INDEX
AS/NZS 4610.2:1999 FurnitureSchool and educationalChairsStrength, durability and stability AS/NZS 4610.3:1999 FurnitureSchool and educationalTables and storage furnitureStrength, durability and stability AS/NZS 4688.1:2007 FurnitureFixed height chairsHuman-interface and general requirements AS/NZS 4688.2:2000 FurnitureFixed height chairsDetermination of strength and durability AS/NZS 4688.3:2000 FurnitureFixed height chairsDetermination of stabilityUpright chairs AS/NZS 4688.4:2000 FurnitureFixed height chairsDetermination of stabilityChairs with tilting or reclining mechanisms when fully reclined and rocking chairs AS/NZS 4703:2007 Electrical wiring in furniture AS/NZS 4790:2006 FurnitureStorage unitsDetermination of strength and durability AS/NZS 4849.1:2003 Upholstery cleaningFabric upholstery AS 5079.12003 Filing cabinetsLateral filing cabinets (ANSI BIFMA X5.2 1997, MOD) AS 5079.22003 Filing cabinetsVertical filing cabinets (ANSI BIFMA X5.3 1997, MOD) AS 5079.32003 Filing cabinetsMobile pedestals (ANSI BIFMA X5.51998, MOD) HB 295 (Set)2008 Product Safety Framework Set HB 295.12007 Product Safety FrameworkApplication guide HB 295.22007 Product Safety FrameworkHazard checklist HB 295.3.12008 Product Safety FrameworkVisual and tactile examination of components HB 295.3.12007 Product Safety FrameworkVisual and tactile examination of components HB 295.3.22008 Product Safety FrameworkHazardous sharp points HB 295.3.22007 Product Safety FrameworkHazardous sharp points HB 295.3.32008 Product Safety FrameworkHazardous sharp edges HB 295.3.32007 Product Safety FrameworkHazardous sharp edges HB 295.3.102008 Product Safety FrameworkRelease of Bisphenol A HB 295.3.102007 Product Safety FrameworkRelease of Bisphenol A HB 295.3.112008 Product Safety FrameworkRelease of chemicals Migration of certain elements HB 295.3.112007 Product Safety FrameworkRelease of chemicals Migration of certain elements HB 295.3.122008 Product Safety FrameworkRelease of N-Nitrosamines and N-Nitrosatables HB 295.3.122007 Product Safety FrameworkRelease of N-Nitrosamines and N-Nitrosatables HB 295.3.132008 Product Safety FrameworkRelease of nickel HB 295.3.132007 Product Safety FrameworkRelease of Nickel HB 295.3.202008 Product Safety FrameworkSnagging trapsProtrusions and gaps HB 295.3.202007 Product Safety FrameworkSnagging trapsProtrusions and gaps HB 295.3.212008 Product Safety FrameworkGaps and openingsFinger entrapment HB 295.3.212007 Product Safety FrameworkGaps and openingsFinger entrapment HB 295.3.222008 Product Safety FrameworkGaps and openingsLimb entrapment HB 295.3.222007 Product Safety FrameworkGaps and openingsLimb entrapment HB 295.3.232008 Product Safety FrameworkGaps and openingsHead entrapment and fall through hazard HB 295.3.232007 Product Safety FrameworkGaps and openingsHead entrapment and fall through hazard HB 295.3.242008 Product Safety FrameworkInformative and instructive material HB 295.3.262008 Product Safety FrameworkLatching and locking mechanisms HB 295.3.262007 Product Safety FrameworkLatching and locking mechanisms HB 295.3.282008 Product Safety FrameworkClimbing hazards footholds HB 295.3.292008 Product Safety FrameworkAccessibility of a part or component HB 295.3.292007 Product Safety FrameworkAccessibility of a part or component
AS 1038.14.22003 Coal and cokeAnalysis and testingHigher rank coal ash and coke ashMajor and minor elementsAcid digestion/flame atomic absorption spectrometric method AS 1038.14.31999 Coal and cokeAnalysis and testingHigher rank coal ash and coke ashMajor and minor elements Wavelength dispersive X-ray fluorescence spectrometric method AS 1038.151995 Coal and cokeAnalysis and testingHigher rank coal ash and coke ashAsh fusibility AS 1038.162005 Coal and cokeAnalysis and testing Assessment and reporting of results AS 1038.182006 Coal and cokeAnalysis and testingCokeSize analysis AS 1038.21.1.12008 Coal and cokeAnalysis and testingHigher rank coal and cokeRelative densityAnalysis sample/density bottle method AS 1038.21.1.22002 Coal and cokeAnalysis and testingHigher rank coal and cokeRelative densityAnalysis sample/volumetric method AS 1038.222000 Coal and cokeAnalysis and testingHigher rank coalMineral matter and water of constitution AS 1038.262005 Coal and cokeAnalysis and testingHigher rank coal and cokeGuide for the determination of apparent relative density AS 22671997 Guide to the conduct of pilot coke oven tests AS 24181995 Coal and cokeGlossary of terms AS 38992002 Higher rank coal and cokeBulk density AS/NZS 4014.1:1999 Domestic solid fuel burning appliancesTest fuelsHardwood AS/NZS 4014.2:1999 Domestic solid fuel burning appliancesTest fuelsSoftwood AS/NZS 4014.3:1999 Domestic solid fuel burning appliancesTest fuelsLignite briquettes AS/NZS 4014.4:1999 Domestic solid fuel burning appliancesTest fuelsSub-bituminous coal AS/NZS 4014.5:1999 Domestic solid fuel burning appliancesTest fuelsSemi-anthracite coal briquettes AS/NZS 4014.6:2007 Domestic solid fuel burning appliancesTest fuelsWood pellets AS 4264.21996 Coal and cokeSamplingCokeSampling procedures ASCRM 0141999 Certified reference materialCoke HB 170:2002 Wood Heating Resource Handbook Guide to the Selection, Installation and Operation of Wood Heaters TR 2.141999 Certified reference materialsCokePreparation and certification of ASCRM 014 FURNITURE AS 1961.22004 Castors and wheelsTest methods and apparatus AS 1961.32004 Castors and wheelsCastors for furniture (ISO22879:2004, MOD) AS 1961.42004 Castors and wheelsCastors for furnitureCastors for swivel chairs AS/NZS 2130:1998 Cots for day nursery, hospital and institutional use Safety requirements AS/NZS 2172:2003 Cots for household useSafety requirements AS/NZS 2172:1995 Cots for household useSafety requirements AS/NZS 2195:1999 Folding cotsSafety requirements AS 26871997 TextilesUpholstery fabrics for domestic and commercial use (excluding face-coated fabrics) AS 3590.21990 Screen-based workstationsWorkstation furniture AS/NZS 3744.1:1998 FurnitureAssessment of the ignitability of upholstered furnitureIgnition sourceSmouldering cigarette AS/NZS 3744.2:1998 FurnitureAssessment of the ignitability of upholstered furnitureIgnition sourceMatch-flame equivalent AS/NZS 3744.3:1998 FurnitureAssesment of the ignitability of upholstered furnitureIgnition sourcesNominal 160 mL/min gas flame and nominal 350 mL/min gas flame AS/NZS 3813:1998 Plastic monobloc chairs AS/NZS 4088.1:1996 Specification for burning behaviour of upholstered furnitureUpholstery materials for domestic furnitureSmouldering ignitability AS/NZS 4220:2003 Bunk beds AS/NZS 4220:1994 Bunk beds AS/NZS 4438:1997 Height adjustable swivel chairs AS/NZS 4442:1997 Office desks AS/NZS 4443:1997 Office panel systemsWorkstations
340
SUBJECT INDEX
GALVANIC CELLS AND BATTERIES Acid secondary cells and batteries AS 21492003 Starter batteriesLead-acid AS 2402.1.12005 Traction batteriesLead-acidVented cells Requirements AS 2402.1.22005 Traction batteriesLead-acidVented cells Installation and usage AS 2402.2.12005 Traction batteriesLead-acidValve-regulated cellsRequirements AS 2402.2.22005 Traction batteriesLead-acidValve-regulated cellsInstallation and usage AS 2548.11998 Battery chargers for lead-acid traction batteries Battery chargers for vented cells AS 2676.11992 Guide to the installation, maintenance, testing and replacement of secondary batteries in buildingsVented cells AS 2676.21992 Guide to the installation, maintenance, testing and replacement of secondary batteries in buildingsSealed cells AS 3011.11992 Electrical installationsSecondary batteries installed in buildingsVented cells AS 3011.21992 Electrical installationsSecondary batteries installed in buildingsSealed cells AS 4029.11994 Stationary batteriesLead-acidVented type AS/NZS 4029.2:2000 Stationary batteriesLead-acidValveregulated type AS 4029.31993 Stationary batteriesLead-acidPure lead positive pasted plate type Alkaline secondary cells and batteries AS 3731.11995 Stationary batteriesNickel-cadmiumVented type AS 3731.21995 Stationary batteriesNickel-cadmiumValveregulated type Galvanic cells and batteries in general AS 40441992 Battery chargers for stationary batteries AS 4086.11993 Secondary batteries for use with stand-alone power systemsGeneral requirements AS 4086.21997 Secondary batteries for use with stand-alone power systemsInstallation and maintenance GEARS AS 20751991 Glossary of terms and notations for gears AS 29381993 GearsSpur and helicalGuide to specification and rating GENERAL METHODS OF TESTS AND ANALYSIS FOR FOOD PRODUCTS AS 46942007 Glycemic index of foods GENERAL RULES see STANDARDIZATION. GENERAL RULES GEODESY see ASTRONOMY. GEODESY. GEOGRAPHY GEOGRAPHY see ASTRONOMY. GEODESY. GEOGRAPHY GLASS Glass in building AS 1288 Set2006 Glass in buildings Set AS 12882006 Glass in buildingsSelection and installation AS 12881994 Glass in buildingsSelection and installation AS 1288 Supplement 12006 Glass in buildingsSelection and installation (Supplement to AS 12882006) AS 1288 PLUS (CD) Set2006 Glass in buildings PLUS CD Set AS/NZS 2208:1996 Safety glazing materials in buildings AS/NZS 4666:2000 Insulating glass units AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass HB 1252007 The glass and glazing handbook (including guide to AS 1288, Glass in buildingsSelection and installation) Glass in general AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass AS/NZS 4668:2000 Glossary of terms used in the glass and glazing industry GRAPHIC TECHNOLOGY Graphic technology in general AS ISO 12647.22008 Graphic technologyProcess control for the production of half-tone colour separations, proof and production printsOffset lithographic processes Materials for graphic technology AS/NZS ISO 11798:2004 Information and documentation Permanence and durability of writing, printing and copying on paperRequirements and test methods
Other standards related to graphic technology AS ISO 19005.12006 Document managementElectronic document file format for long-term preservationUse of PDF 1.4 (PDF/A-1) GRAPHICAL SYMBOLS Graphical symbols for use on electrical and electronics engineering drawings, diagrams, charts and in relevant technical product documentation AS 1046.11978 Letter symbols for use in electrotechnology General AS 1046.21978 Letter symbols for use in electrotechnology Telecommunications and electronics AS 1046.31991 Letter symbols for use in electrotechnology Logarithmic quantities and units AS 1046.41991 Letter symbols for use in electrotechnology Symbols for quantities to be used for rotating electrical machines AS 1102.121984 Graphical symbols for electrotechnologyElectric traction AS 1102.1011989 Graphical symbols for electrotechnical documentationGeneral information and general index AS/NZS 1102.102:1997 Graphical symbols for electrotechnical documentationSymbol elements, qualifying symbols and other symbols having general application AS/NZS 1102.103:1997 Graphical symbols for electrotechnical documentationConductors and connecting devices AS/NZS 1102.104:1997 Graphical symbols for electrotechnical documentationBasic passive components AS/NZS 1102.105:1997 Graphical symbols for electrotechnical documentationSemiconductors and electron tubes AS/NZS 1102.106:1997 Graphical symbols for electrotechnical documentationProduction and conversion of electrical energy AS/NZS 1102.107:1997 Graphical symbols for electrotechnical documentationSwitchgear, controlgear and protective devices AS/NZS 1102.108:1997 Graphical symbols for electrotechnical documentationMeasuring instruments, lamps and signalling devices AS/NZS 1102.109:1997 Graphical symbols for electrotechnical documentationTelecommunicationsSwitching and peripheral equipment AS/NZS 1102.110:1997 Graphical symbols for electrotechnical documentationTelecommunicationsTransmission AS/NZS 1102.111:1997 Graphical symbols for electrotechnical documentationArchitectural and topographical installation plans and diagrams AS/NZS 1102.112:1995 Graphical symbols for electrotechnology Binary logic elements AS/NZS 1102.113:1995 Graphical symbols for electrotechnology Analogue elements AS 37021989 Item designation in electrotechnology AS/NZS 4383.1:1996 Preparation of documents used in electrotechnologyGeneral requirements AS/NZS 4383.2:1996 Preparation of documents used in electrotechnologyFunction-oriented diagrams AS/NZS 4383.3:1996 Preparation of documents used in electrotechnologyConnection diagrams, tables and lists AS/NZS 4383.4:1998 Preparation of documents used in electrotechnologyLocation and installation documents AS 60417.12004 Graphical symbols for use on equipment Overview and application AS 60417.2.12004 Graphical symbols for use on equipmentGeneral application AS 60417.2.22004 Graphical symbols for use on equipmentAudiovisual equipment AS 60417.2.32004 Graphical symbols for use on equipmentTelephone and telecommunications AS 60417.2.42004 Graphical symbols for use on equipmentMaritime navigation AS 60417.2.52004 Graphical symbols for use on equipmentHome electric appliances AS 60417.2.62004 Graphical symbols for use on equipmentMedical equipment AS 60417.2.72004 Graphical symbols for use on equipmentSafety aspects HB 3:1996 Electrical and electronic drawing practice for students
341
HAND-HELD TOOLS
SUBJECT INDEX
AS/NZS 60335.2.45:2004 Household and similar electrical appliancesSafety- Particular requirements for portable heating tools and similar appliances AS/NZS 60745.1:2003 Hand-held motor-operated electric tools SafetyGeneral requirements AS/NZS 60745.2.1:2003 Hand-held motor-operated electric tools Safety- Particular requirements for drills and impact drills AS/NZS 60745.2.2:2003 Hand-held motor-operated electric tools Safety- Particular requirements for screwdrivers AS/NZS 60745.2.3:2006 Hand-held Motor-operated Electric Tools SafetyParticular requirements for grinders, polishers and disktype sanders AS/NZS 60745.2.4:2003 Hand-held motor-operated electric tools Safety- Particular requirements for sanders and polishers AS/NZS 60745.2.5:2007 Hand-held motor-operated electric tools SafetyParticular requirements for circular saws (IEC 60745-25: Ed 4.0, IDT) AS/NZS 60745.2.5:2003 Hand-held motor-operated electric tools Safety- Particular requirements for circular saws AS/NZS 60745.2.6:2003 Hand-held motor-operated electric tools Safety- Particular requirements for hammers AS/NZS 60745.2.8:2003 Hand-held motor-operated electric tools SafetyParticular requirementsParticular requirements for shears and nibblers AS/NZS 60745.2.9:2003 Hand-held motor-operated electric tools Safety- Particular requirements for tappers AS/NZS 60745.2.11:2003 Hand-held motor-operated electric tools Safety- Particular requirements for reciprocating saws AS/NZS 60745.2.12:2003 Hand-held motor-operated electric tools Safety- Particular requirements for concrete vibrators AS/NZS 60745.2.13:2006 Hand-held Motor-operated Electric ToolsSafetyParticular requirements for chain saws AS/NZS 60745.2.14:2003 Hand-held motor-operated electric tools Safety- Particular requirements for planers AS/NZS 60745.2.15:2006 Hand-held Motor-operated Electric ToolsSafetyParticular requirements for hedge trimmers AS/NZS 60745.2.17:2003 Hand-held motor-operated electric tools Safety- Particular requirements for routers and trimmers AS/NZS 60745.2.18:2003 Hand-held motor-operated electric tools Safety- Particular requirements for strapping tools AS/NZS 60745.2.19:2005 Hand-held motor-operated electric tools SafetyParticular requirements for jointers AS/NZS 60745.2.20:2003 Hand-held motor-operated electric tools Safety- Particular requirements for band saws AS/NZS 60745.2.21:2003 Hand-held motor-operated electric tools Safety- Particular requirements for drain cleaners Hand-operated tools AS 3527.21990 Hand-operated screwdrivers and screwdriver bits Insulated screwdrivers AS 3527.31990 Hand-operated screwdrivers and screwdriver bits Bits for manually driven and power-driven screwdrivers AS 3797.11991 Hand hammersGeneral requirements AS 3797.21991 Hand hammersSpecific requirements for heavy hammers AS 3797.31991 Hand hammersSpecific requirements for light hammers AS 39941992 Socket wrenchesDimensions of drive squares AS/NZS 4056.1:1992 Pliers and nippersNomenclature AS/NZS 4056.2:1992 Pliers and nippersGeneral technical requirements AS/NZS 4056.3:1992 Pliers and nippersMethods of test AS/NZS 4056.4:1992 Pliers and nippersPliers for gripping and manipulatingDimensions and test values AS/NZS 4056.5:1992 Pliers and nippersEngineer's and lineman's pliersDimensions and test values AS/NZS 4056.6:1992 Pliers and nippersLever assisted side cutting pliers, end and diagonal cutting nippersDimensions and test values AS/NZS 4056.7:1992 Pliers and nippersEnd cutting nippers Dimensions and test values AS/NZS 4056.8:1992 Pliers and nippersDiagonal cutting nippers Dimensions and test values AS/NZS 4056.9:1992 Pliers and nippersMultiple slip joint pliers Dimensions and test values AS/NZS 4056.10:1992 Pliers and nippersConstruction worker's pincersDimensions and test values
Graphical symbols for use on information technology and telecommunications technical drawings and in relevant technical product documentation AS 26451987 Information processingDocumentation symbols and conventions for data, program and system flowcharts, program network charts and systems resources charts AS 38971991 Information processingGuidelines for the management of software documentation AS 38981991 Information processingUser documentation and cover information for consumer software packages Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation AS 1101.32005 Graphical symbols for general engineering Welding and non-destructive examination AS 1101.41989 Graphical symbols for general engineering Machine elements AS 1101.51984 Graphical symbols for general engineering Piping, ducting and mechanical services for buildings AS 1101.61989 Graphical symbols for general engineering Process measurement control functions and instrumentation AS 29162007 Symbols for graphic representation of coal seams and associated strata AS 4156.41999 Coal preparationFlowsheets and symbols AS 43681996 Mine plansPreparation and symbols AS/NZS 4382:1996 Preparation of function charts for control systems HB 201996 Graphical symbols for fire protection drawings HB 241992 Symbols and abbreviations for building and construction Graphical symbols for use on specific equipment AS 2359.52005 Powered industrial trucksSymbols for operator controls and other displays AS 2359.142005 Powered industrial trucksFork armsTechnical characteristics and testing AS 2359.152005 Powered industrial trucksFork-arm extensions and telescopic fork armsTechnical characteristics and strength requirements AS 2359.162005 Powered industrial trucksSafety signs and hazard pictorialsGeneral principles AS/NZS 4334:1995 Graphic symbols for use on medical electrical equipment AS 60417.12004 Graphical symbols for use on equipment Overview and application AS 60417.2.12004 Graphical symbols for use on equipmentGeneral application AS 60417.2.22004 Graphical symbols for use on equipmentAudiovisual equipment AS 60417.2.32004 Graphical symbols for use on equipmentTelephone and telecommunications AS 60417.2.42004 Graphical symbols for use on equipmentMaritime navigation AS 60417.2.52004 Graphical symbols for use on equipmentHome electric appliances AS 60417.2.62004 Graphical symbols for use on equipmentMedical equipment AS 60417.2.72004 Graphical symbols for use on equipmentSafety aspects Graphical symbols in general AS 1101.12007 Graphic symbols for general engineering Hydraulic and pneumatic systems AS 13191994 Safety signs for the occupational environment AS 23421992 Development, testing and implementation of information and safety symbols and symbolic signs Other graphical symbols AS 2156.12001 Walking tracksClassification and signage AS 2156.22001 Walking tracksInfrastructure design Public information symbols AS 24162002 Design and application of water safety signs HAND-HELD TOOLS Electric tools AS/NZS 3160:2001 Approval and test specificationHand-held portable electric tools AS/NZS 3350.2.45:1997 Safety of household and similar electrical appliancesParticular requirementsPortable heating tools and similar appliances
342
CLOTHING
343
SUBJECT INDEX
AS ISO 10303.2042004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Mechanical design using boundary representation (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) AS 10303.2072000 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Sheet metal die planning and design AS ISO 10303.2092004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Composite and metallic structural analysis and related design (ONLY AVAILABLE ON AS ISO 103032004 (CDROM)) AS ISO 10303.2102004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Electronic assembly, interconnection, and packaging design (ONLY AVAILABLE ON AS ISO 103032004 (CDROM)) AS ISO 10303.2122004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Electrotechnical design and installation (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) AS ISO 10303.2142004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Core data for automotive mechanical design processes (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) AS ISO 10303.2162004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Ship moulded forms (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) AS ISO 10303.2242004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Mechanical product definition for process planning using machining features (ONLY AVAILABLE ON AS ISO 10303 2004 (CD-ROM)) AS ISO 10303.2252004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Building elements using explicit shape representation (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) AS ISO 10303.2272004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Plant spatial configuration (ONLY AVAILABLE ON AS ISO 103032004 (CD-ROM)) AS ISO 10303.2322004 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Technical data packaging core information and exchange (ONLY AVAILABLE ON AS ISO 103032004 (CDROM)) AS ISO 16100.12004 Industrial automation systems and integrationManufacturing software capability profiling for interoperabilityFramework AS ISO 16100.22004 Industrial automation systems and integrationManufacturing software capability profiling for interoperabilityProfiling methodology AS IEC 61131.12004 Programmable controllersGeneral information AS IEC 61131.22004 Programmable controllersEquipment requirements and tests AS IEC 61131.32004 Programmable controllersProgramming languages AS IEC 61131.42004 Programmable controllersUser guidelines AS IEC 61131.52004 Programmable controllersCommunications AS IEC 61131.72004 Programmable controllersFuzzy control programming AS IEC 61131.82004 Programmable controllersGuidelines for the application and implementation of programming languages AS IEC 61511.12004 Functional safetySafety instrumented systems for the process industry sectorFramework, definitions, systems, hardware and software requirements AS IEC 61511.22004 Functional safetySafety instrumented systems for the process industry sectorGuidelines for the application of AS IEC 61511-1 AS IEC 61511.32004 Functional safetySafety instrumented systems for the process industry sectorGuidance for the determination of the required safety integrity levels Industrial process measurement and control AS 1101.61989 Graphical symbols for general engineering Process measurement control functions and instrumentation AS ISO 15745.12004 Industrial automation systems and integrationOpen systems application integration frameworkGeneric reference description
AS 4480.11998 Textiles for health care facilities and institutionsMedical sheepskinsProduct specification and testing MP 852000 Guide to application of AS 41871998, Heat-sensitive endoscope reprocessing HYDRAULIC ENERGY ENGINEERING AS 1101.12007 Graphic symbols for general engineeringHydraulic and pneumatic systems HYDRAULIC FLUIDS AS 3997.11992 Fluid powerFire-resistant hydraulic fluidsClassification AS 3997.21993 Fluid powerFire-resistant hydraulic fluidsGuidance on the selection, use and storage AS 4002.12001 Hydraulic fluid powerParticulate contamination of systemsMethod of coding the level of contamination AS 4002.22001 Hydraulic fluid powerParticulate contamination of systemsExtraction of fluid samples from an operating system INDUSTRIAL AUTOMATION SYSTEMS Industrial automation systems in general AS 10303.11998 Industrial automation systems and integration Product data representation and exchangeOverview and fundamental principles AS 10303.111998 Industrial automation systems and integration Product data representation and exchangeDescription methods: The EXPRESS language reference manual AS 10303.121999 Industrial automation systems and integration Product data representation and exchangeDescription methods: The EXPRESS-I language reference manual AS 10303.211998 Industrial automation systems and integration Product data representation and exchangeImplementation methods: Clear text encoding of the exchange structure AS 10303.222000 Industrial automation systems and integration Product data representation and exchangeImplementation methods: Standard data access interface AS 10303.311998 Industrial automation systems and integration Product data representation and exchangeConformance testing methodology and framework: General concepts AS 10303.411998 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Fundamentals of product description and support AS 10303.421998 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Geometric and topological representation AS 10303.431998 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Representation structures AS 10303.441998 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Product structure configuration AS 10303.452000 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Materials AS 10303.461998 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Visual presentation AS 10303.471999 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resource: Shape variation tolerances AS 10303.492000 Industrial automation systems and integration Product data representation and exchangeIntegrated generic resources: Process structure and properties AS 10303.1011998 Industrial automation systems and integrationProduct data representation and exchangeIntegrated application resources: Draughting AS ISO 10303.1042004 Industrial automation systems and integrationProduct data representation and exchangeIntegrated application resource: Finite element analysis AS 10303.1051999 Industrial automation systems and integrationProduct data representation and exchangeIntegrated application resource: Kinematics AS 10303.2011998 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Explicit draughting AS 10303.2021999 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Associative draughting AS 10303.2031998 Industrial automation systems and integrationProduct data representation and exchangeApplication protocol: Configuration controlled design
344
SUBJECT INDEX
AS ISO 15745.22004 Industrial automation systems and integrationOpen systems application integration framework Reference description for ISO 11898-based control systems AS ISO 15745.32004 Industrial automation systems and integrationOpen systems application integration framework Reference description for IEC 61158-based control systems AS ISO 15745.42004 Industrial automation systems and integrationOpen systems application integration framework Reference description for Ethernet-based control systems AS ISO 18876.12004 Industrial automation systems and integrationIntegration of industrial data for exchange, access and sharingArchitecture overview and description AS ISO 18876.22004 Industrial automation systems and integrationIntegration of industrial data for exchange, access and sharingIntegration and mapping methodology AS ISO 220932004 Industrial automation systems and integrationPhysical device controlDimensional Measuring Interface Standard (DMIS) AS IEC 608122008 Analysis techniques for system reliability Procedure for failure mode and effects analysis (FMEA) AS 61508 Set2005 Functional safety of electrical/electronic/programmable electronic safety-related systems Set AS 61508.02006 Functional safety of electrical/electronic/programmable electronic safety-related systems Functional safety and AS 61508 AS 61508.11999 Functional safety of electrical/electronic/programmable electronic safety-related systems General requirements AS 61508.22001 Functional safety of electrical/electronic/programmable electronic safety-related systems Requirements for electrical/electronic/programmable electronic safety-related systems AS 61508.31999 Functional safety of electrical/electronic/programmable electronic safety-related systems Software requirements AS 61508.41999 Functional safety of electrical/electronic/programmable electronic safety-related systems Definition and abbreviations AS 61508.51999 Functional safety of electrical/electronic/programmable electronic safety-related systems Examples of methods for the determination of safety integrity levels AS 61508.62001 Functional safety of electrical/electronic/programmable electronic safety-related systems Guidelines on the application of AS 61508.2 and AS 61508.3 AS 61508.72001 Functional safety of electrical/electronic/programmable electronic safety-related systems Overview of techniques and measures AS 620612006 Safety of machineryFunctional safety of safetyrelated electrical, electronic and programmable electronic control systems Industrial robots. Manipulators AS 29391987 Industrial robot systemsSafe design and usage AS 38771991 Manipulating industrial robotsVocabulary AS 39841991 Manipulating industrial robotsPerformance criteria and related test methods AS 3985.11991 Manipulating industrial robotsMechanical interfacesCircular (form A) AS 39861991 Manipulating industrial robotsCoordinate systems and motions AS 39871991 Manipulating industrial robotsPresentation of characteristics Manipulators see Industrial robots. Manipulators Numerically controlled machines AS 1114.11985 Numerical control of machinesData format for positioning, line motion and contouring control equipment AS 11151985 Numerical control of machinesAxis and motion nomenclature INDUSTRIAL FURNACES Fuel furnaces AS 13751985 Industrial fuel-fired appliances (known as the SAA Industrial Fuel-fired Appliances Code) INDUSTRIAL HYGIENE see OCCUPATIONAL SAFETY. INDUSTRIAL HYGIENE INDUSTRIAL TRUCKS AS 17631985 Industrial trucksGlossary of terms
INDUSTRIAL FURNACES
AS 1961.12004 Castors and wheelsVocabulary, symbols and multilingual terminology AS 1961.22004 Castors and wheelsTest methods and apparatus AS 1961.52004 Castors and wheelsCastors for manually propelled equipment for institutional applications AS 1961.72004 Castors and wheelsApplications up to 1.1 m/s (4 km/h) AS 1961.82004 Castors and wheelsApplications over 1.1m/s (4km/h) and up to 4.4m/s (16km/h) AS 2359.11995 Powered industrial trucksGeneral requirements AS 2359.21985 Industrial trucks (known as the SAA Industrial Truck Code)Operation AS 2359.31995 Powered industrial trucksCounterbalanced fork-lift trucks Stability tests AS 2359.41995 Powered industrial trucksReach and straddle fork-lift trucksStability tests AS 2359.52005 Powered industrial trucksSymbols for operator controls and other displays AS 2359.61995 Powered industrial trucksSafety code AS 2359.71995 Powered industrial trucksTerminology AS 2359.81995 Powered industrial trucksPallet stackers and high-lift platform trucksStability tests AS 2359.92006 Powered industrial trucksOverhead guardsSpecification and testing (ISO 6055:2004, MOD) AS 2359.101995 Powered industrial trucksFork-lift trucksHook-on type fork armsVocabulary AS 2359.111995 Powered industrial trucksFork-lift trucksHook-on type fork arms and fork carriersMounting dimensions AS 2359.121996 Powered industrial trucksHazardous areas AS 2359.132005 Powered industrial trucksBrake performance and component strength AS 2359.142005 Powered industrial trucksFork armsTechnical characteristics and testing AS 2359.152005 Powered industrial trucksFork-arm extensions and telescopic fork armsTechnical characteristics and strength requirements AS 2359.162005 Powered industrial trucksSafety signs and hazard pictorialsGeneral principles AS 2359.172008 Powered industrial trucksStability tests for rough terrain trucks (ISO 8379:1998, MOD) AS 2359.182008 Powered industrial trucksStability tests for industrial variable-reach trucks AS 2359.192008 Powered industrial trucksAdditional stability tests for industrial variable-reach trucks handling freight containers of length 6 m and above AS 4972(Int)2001 Counterbalanced trucks handling freight containers for 6 m (20 ft) length and aboveAdditional stability tests AS 49732001 Industrial trucksInspection and repair of fork arms in service on fork-lift trucks AS 49832003 Gas fuel systems for forklifts and industrial engines INFORMATION SCIENCES. PUBLISHING AS 50372005 Knowledge managementa guide AS/NZS ISO 15706:2004 Information and documentationInternational Standard Audiovisual Number (ISAN) AS/NZS ISO 15707:2004 Information and documentationInternational Standard Music Work Code (ISWC) HB 1892004 Knowledge Management Terminology and ReadingsAn Australian Guide Documents in administration, commerce and industry AS/NZS 1388:1994 Guidelines for technical information for building and construction products AS/NZS 2632.1:2008 Codes for the representation of names of countries and their subdivisionsCountry codes AS/NZS 2632.2:1999 Codes for the representation of names of countries and their subdivisionsCountry subdivision code AS/NZS 2632.3:1999 Codes for the representation of names of countries and their subdivisionsCodes for formerly used names of countries AS 28281999 Paper-based health care records AS 37591990 Codes for the representation of currencies and funds AS ISO 86012007 Data elements and interchange formats Information interchangeRepresentation of dates and times AS ISO 86012003 Data elements and interchange formats Information interchangeRepresentation of dates and times MP 511986 A study of language in Australian business documents
345
SUBJECT INDEX
AS/NZS 15026:1999 Information technologySystem and software integrity levels AS ISO/IEC 20000 Set2007 Information technology Service Set AS ISO/IEC 20000.12007 Information technologyService management Specification AS ISO/IEC 20000.22007 Information technologyService management Code of practice AS IEC 60300.22005 Dependability managementGuidance for dependability programme management AS IEC 60300.3.32005 Dependability managementApplication guideLife cycle costing AS IEC 60300.3.142005 Dependability managementApplication guide Maintenance and maintenance support ICT Set2006 Corporate governance of Information and Communication Technology (ICT) Set HB 261995 The computer anti-virus handbook INKS. PRINTING INKS AS/NZS ISO 11798:2004 Information and documentationPermanence and durability of writing, printing and copying on paperRequirements and test methods INLAND NAVIGATION VESSELS AS 4132.11993 Boat and ship design and constructionDesign loadings AS 4132.21993 Boat and ship design and constructionAluminium construction AS 4132.31993 Boat and ship design and constructionFibre-reinforced plastics construction INORGANIC CHEMICALS Acids AS 26691983 Sulphuric acid for use in lead-acid batteries Oxides AS 40781992 Fire protectionFire extinguishing mediaCarbon dioxide INSTALLATIONS IN BUILDINGS Drainage systems AS/NZS 3500 (Set):2003 Plumbing and drainage Set AS/NZS 3500.0:2003 Plumbing and drainageGlossary of terms AS/NZS 3500.0:1995 National Plumbing and Drainage Code Glossary of terms AS/NZS 3500.2:2003 Plumbing and drainageSanitary plumbing and drainage AS 3500.21990 National Plumbing and Drainage CodeSanitary plumbing and sanitary drainage AS 3500.2.11996 National Plumbing and DrainageSanitary plumbing and drainagePerformance requirements AS/NZS 3500.2.2:1996 National Plumbing and Drainage- Sanitary plumbing and drainageAcceptable solutions AS 3500.31990 National Plumbing and Drainage Code Stormwater drainage AS 3500.3.11998 National plumbing and drainageStormwater drainagePerformance requirements AS/NZS 3500.4:2003 Plumbing and drainageHeated water services AS/NZS 3500.5:2000 National Plumbing and DrainageDomestic installations AS/NZS 4936:2002 Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems AS 5200.0002006 Technical specification for plumbing and drainage productsProcedures for certification of plumbing and drainage products ATS 5200.0042005 Technical Specification for plumbing and drainage productsUrinal flushing cisterns AS 5200.0072008 Plumbing and drainage productsMetal-bodied water hammer arresters ATS 5200.0072004 Technical Specification for plumbing and drainage productsWater hammer arrestors ATS 5200.0122005 Technical Specification for plumbing and drainage productsIn-line valves for use in plumbing water supply systemsMiscellaneous types metallic and non-metallic ATS 5200.0142004 Technical Specification for plumbing and drainage productsJointing materials ATS 5200.0202004 Technical Specification for plumbing and drainage productsFlushing valves for water closets and urinalsfor use with mains supply ATS 5200.0212004 Technical Specification for plumbing and drainage productsFlushing valves for water closets and urinalsfor use with break tank supply
Information sciences AS/NZS 999:1999 Information and documentationGuidelines for the content, organization and presentation of indexes AS/NZS 1519:2006 Information and documentationInternational Standard Book Number (ISBN) AS/NZS 2619:1998 Information and documentationFormat for information exchange AS 37361990 Geographical information systemsBibliographical elements on maps AS/NZS 4450.1:1997 Information and documentationBibliographic data element directoryInterloan applications AS/NZS 4450.2:1997 Information and documentationBibliographic data element directoryAcquisitions applications AS/NZS 4450.3:1997 Information and documentationBibliographic data element directoryInformation retrieval applications AS/NZS 4450.4:2000 Information and documentationBibliographic data element directoryCirculation applications AS/NZS ISO 4789:2004 Information and documentation International library statistics AS 50372005 Knowledge managementa guide AS/NZS ISO 5127:2004 Information and documentation Vocabulary AS/NZS ISO 5901:2004 Information and documentation International standard recording code AS/NZS ISO 11798:2004 Information and documentation Permanence and durability of writing, printing and copying on paperRequirements and test methods AS ISO 15489 (Set)2004 Records Management Set AS ISO 15489.12002 Records managementGeneral AS ISO 15489.22002 Records managementGuidelines AS/NZS ISO 15511:2004 Information and documentation International Standard Identifier for Libraries and Related Organizations (ISIL) AS ISO 223102006 Information and documentationGuidelines for standards drafters for stating records management requirements in standards AS ISO 23081.12006 Information and documentationRecords management processesMetadata for recordsPrinciples AS/NZS ISO 23081.2:2007 Information and documentation Records management processesMetadata for records Conceptual and implementation issues MP 932005 2005 Australian Design Awards Yearbook MP 932003 2003 Australian Design Awards Yearbook MP 932002 2002 Australian Design Awards Yearbook MP 932001 2001 Australian Design Awards Yearbook Publishing AS/NZS 1519:2006 Information and documentationInternational Standard Book Number (ISBN) AS/NZS 2807:2000 Reporting outstanding orders (in the book trade) AS/NZS 4449:1997 Information and documentationElectronic manuscript preparation and markup AS/NZS ISO 10957:2004 Information and documentation International standard music number (ISMN) INFORMATION TECHNOLOGY (IT) IN GENERAL AS 1189.01991 Data processingVocabularyConsolidated index AS 1189.11991 Data processingVocabularyFundamental terms AS 1189.21982 Data processingVocabularyArithmetic and logic operations AS 1189.31991 Data processingVocabularyEquipment technology AS 1189.41991 Data processingVocabularyOrganization of data AS 1189.51991 Data processingVocabularyRepresentation of data AS 1189.61991 Data processingVocabularyPreparation and handling of data AS 1189.81991 Data processingVocabularyControl, integrity and security AS 1189.91985 Data processingVocabularyData communication AS 1189.101982 Data processingVocabularyOperating techniques and facilities AS 1189.111991 Data processingVocabularyProcessing units AS 1189.181991 Data processingVocabularyDistributed data processing AS 1189.191991 Data processingVocabularyAnalog computing AS 80152005 Corporate governance of information and communication technology
346
SUBJECT INDEX
ATS 5200.0262004 Technical Specification for plumbing and drainage productsCold water storage tanks ATS 5200.0302007 Technical Specification for plumbing and drainage productsSolenoid valves ATS 5200.0332004 Technical Specification for plumbing and drainage productsSpraying apparatus/dispensing units with the option of chemical additionsHose connected ATS 5200.037.12006 Technical Specification for plumbing and drainage productsFlow controllersFor controlling flows in cold or heated water systems AS 5200.037.22008 Plumbing and drainage productsFlow controllers for use with heated or cold water systems ATS 5200.0402005 Technical Specification for plumbing and drainage productsWaste pipe connection outlets and gratings, separate or integral ATS 5200.0422004 Technical Specification for plumbing and drainage productsRoll-grooved jointing systems ATS 5200.0462005 Technical Specification for plumbing and drainage productsDiversion systemsWash down and first flush ATS 5200.0472005 Technical Specification for plumbing and drainage productsSelf-sealing devices ATS 5200.0502005 Technical Specification for plumbing and drainage productsPrefabricated bathroom modules ATS 5200.0522005 Technical Specification for plumbing and drainage productsMetallic-bodied inlet pressure control valves greater than DN50 AS 5200.0532008 Plumbing and drainage productsStainless steel pipes and tubes for pressure applications ATS 5200.0532006 Technical Specification for plumbing and drainage productsStainless steel pipes and tubes ATS 5200.0552008 Technical specifications for plumbing and drainage productsPlastics fittingsConnectors with flexible intermediate joints for drainage and sewerage applications ATS 5200.1042005 Technical Specification for plumbing and drainage productsAppliances (miscellaneous) ATS 5200.4202005 Technical Specification for plumbing and drainage productsTrap-priming valves AS 5200.4582008 Plumbing and drainage productsUniversal plastic-bodied transition couplings ATS 5200.4592004 Technical Specification for plumbing and drainage productsWaterless urinalsWall hung (Level 1) ATS 5200.4602005 Technical Specification for plumbing and drainage productsGrey water diversion device (GWDD) ATS 5200.4612004 Technical Specification for plumbing and drainage productsStainless steel tubes and mechanical compression fittings for pressure applications ATS 5200.4632005 Technical Specification for plumbing and drainage productsPositive air pressure attenuator ATS 5200.4642004 Technical Specification for plumbing and drainage productsHot water manual or sensor-activated pumping systems ATS 5200.4662004 Technical Specification for plumbing and drainage productsRainwater tank connection devices ATS 5200.4682005 Technical Specification for plumbing and drainage productsHot water systemsRecirculation valves ATS 5200.4692005 Technical Specification for plumbing and drainage productsWaterless or limited flush urinalsWith an integral sealing device ATS 5200.4712005 Technical specification for plumbing and drainage productsStainless steel tubes and mechanical compression fittings for pressure applicationsAlternative systems ATS 5200.4722006 Technical Specification for plumbing and drainage productsHeated water system recirculation device ATS 5200.4732007 Technical Specification for plumbing and drainage productsStainless steel/nano-antibiotic PP-R pipe systems for water supply applications ATS 5200.4752006 Technical Specification for plumbing and drainage productsHeated Water SystemsCold water recovery device ATS 5200.4762006 Technical Specification for plumbing and drainage productsHeated water systemsLeak protection device ATS 5200.4772006 Technical Specification for plumbing and drainage productsRainwater/mains supply changeover devices
INSTALLATIONS IN BUILDINGS
ATS 5200.4782006 Technical Specification for plumbing and drainage productsCross-linked polyethylene/Aluminium/Crosslinked polyethylene macro-composite pipe systems for pressure applications ATS 5200.4792006 Technical Specification for plumbing and drainage productsFlood stop safety valve ATS 5200.4812006 Technical Specification for plumbing and drainage productsThermal switching valves ATS 5200.4822006 Technical Specification for plumbing and drainage productsSoil waste dump fitting ATS 5200.4852006 Technical Specification for plumbing and drainage productsPressure compensating tank ATS 5200.4902007 Technical Specification for plumbing and drainage productsCross-linked polyethylene/aluminium/polyethylene-composite pipe systems for pressure applications ATS 5200.4992008 Technical Specification for plumbing and drainage productsInline sewer dosing unit (SDU) ATS 5200.9992005 Technical Specification for plumbing and drainage productsDeveloping technical specifications PLUMBING AND GAS SET2005 Plumbing and Gas Installations Set HB 5.11991 Australian Standards for plumbing studentsTrade Course MP 522005 Manual of authorization procedures for plumbing and drainage products MP 522001 Manual of authorization procedures for plumbing and drainage products MP 781999 Manual for the assessment of risks of plumbing products RUL PL.02002 Rulings to plumbing and piping systems StandardsPart 0: Introduction and list of rulings RUL PL.12002 Rulings to plumbing and piping systems StandardsRuling 1: Installation of backflow prevention devices (Ruling to AS 3500.11992) RUL PL.22002 Rulings to plumbing and piping systems StandardsRuling 2: Baths (Ruling to AS 3500.21990) RUL PL.32002 Rulings to plumbing and piping systems StandardsRuling 3: Terminal fittings (Ruling to AS 3500.41994) RUL PL.42002 Rulings to plumbing and piping systems StandardsRuling 4: Water storage and break tanks (Ruling to AS 3500.11992) RUL PL.52002 Rulings to plumbing and piping systems StandardsRuling 5: Installation of cisterns (Ruling to AS 3500.1 1992) RUL PL.62002 Rulings to plumbing and piping systems StandardsRuling 6: Upstream vent (Ruling to AS 3500.21990) RUL PL.72002 Rulings to plumbing and piping systems StandardsRuling 7: Upstream vent (Ruling to AS 3500.21990) RUL PL.82002 Rulings to plumbing and piping systems StandardsRuling 8: External hose taps (Ruling to AS 3500.11992) RUL PL.92002 Rulings to plumbing and piping systems StandardsCopper pipes and copper fittings (Ruling to AS 3500.2 1990) RUL PL.102002 Rulings to plumbing and piping systems StandardsRuling 10: Minimum thickness for thermal insulation (Ruling to AS 3500.41994) RUL PL.112002 Rulings to plumbing and piping systems StandardsRuling 11: DN 80 stack with the top section graded installed in a Class 1 to 4 building (Ruling to AS 3500.21990) RUL PL.122002 Rulings to plumbing and piping systems StandardsRuling 12: Drains in landslip areas (Ruling to AS 3500.2 1990) RUL PL.132002 Rulings to plumbing and piping systems StandardsRuling 13: Drains in landslip areas (Ruling to AS 3500.3 1990) RUL PL.142002 Rulings to plumbing and piping systems StandardsRuling 14: Cooling towers (Ruling to AS 3500.11992) RUL PL.152002 Rulings to plumbing and piping systems StandardsRuling 15: Graded discharge pipes (Ruling to AS 3500.21990) RUL PL.162002 Rulings to plumbing and piping systems StandardsRuling 16: Sanitary fixtures delivery temperature (Ruling to AS 3500.41994) RUL PL.172002 Rulings to plumbing and piping systems StandardsRuling 17: Installation (Ruling to AS 3500.41994)
347
INSTALLATIONS IN BUILDINGS
SUBJECT INDEX
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS/NZS 3001:2008 Electrical installationsTransportable structures and vehicles including their site supplies AS/NZS 3002:2008 Electrical installationsShows and carnivals AS/NZS 3003:2003 Electrical installationsPatient treatment areas of hospitals and medical, dental practices and dialyzing locations AS 30061982 Adequate electrical installations in domestic premises AS/NZS 3008.1.1:1998 Electrical installationsSelection of cables Cables for alternating voltages up to and including 0.6/1 kV Typical Australian installation conditions AS/NZS 3008.1.2:1998 Electrical installationsSelection of cables Cables for alternating voltages up to and including 0.6/1 kV Typical New Zealand installation conditions AS/NZS 3009:1998 Electric installationsEmergency power supplies in hospitals AS/NZS 3010:2005 Electrical installationsGenerating sets AS/NZS 3012:2003 Electrical installationsConstruction and demolition sites AS/NZS 3013:2005 Electrical installationsClassification of the fire and mechanical performance of wiring system elements AS/NZS 3013:1995 Electrical installationsClassification of the fire and mechanical performance of wiring systems AS/NZS 3015:2004 Electrical installationsExtra-low voltage d.c. power supplies and service earthing within public telecommunications networks AS/NZS 3017:2007 Electrical installationsVerification guidelines AS/NZS 3018:2001 Electrical installationsDomestic installations AS/NZS 3019:2007 Electrical installationsPeriodic verification AS/NZS 3760:2003 In-service safety inspection and testing of electrical equipment AS/NZS 4249:1994 Electrical safety practicesFilm, video and television sites AS/NZS 4510:1999 Isolated electrical supply systems for medical use AS 4755.3.12008 Demand response capabilities and supporting technologies for electrical productsInteraction of demand response enabling devices and electrical productsOperational instructions and connections for airconditioners AS/NZS 60079 Set:2008 Electrical apparatus for explosive gas atmospheres Set AS/NZS 61241 Set:2008 Electrical apparatus for use in the presence of combustible dust Set AS/NZS 61534.1:2008 Powertrack systemsGeneral requirements (IEC 61534-1, Ed. 1 (2003) MOD) AS 62052.212006 Electricity metering equipment (ac)General requirements, tests and test conditionsTariff and load control equipment (IEC62052-21, Ed. 1.0 (2004) MOD) AS 62053.212005 Electricity metering equipment (AC)Particular requirementsStatic meters for active energy (classes 1 and 2) (IEC 62053-21 Ed.1.0 (2003) MOD) AS 62053.222005 Electricity metering equipment (AC)Particular requirementsStatic meters for active energy (classes 0.2 S and 0.5 S) AS 62053.232006 Electricity metering equipment (ac)Particular requirementsStatic meters for reactive energy (classes 2 and 3) AS 62054.112006 Electricity metering (ac)Tariff and load control Particular requirements for electronic ripple control receivers AS 62054.212006 Electricity metering (ac)Tariff and load control Particular requirements for time switches AS 62056.212006 Electricity meteringData exchange for meter reading, tariff and load controlDirect local data exchange HB 132007 Electrical equipment for hazardous areas HB 3012001 Electrical installationsDesigning to the Wiring rules AS/ACIF S009:2006 Installation requirements for customer cabling (Wiring Rules) CCM Volume 22007 Communications Cabling Manual Volume 2 Standards Escalators see Lifts. Escalators Gas supply systems AS 16972005 Installation and maintenance of steel pipe systems for gas
RUL PL.182002 Rulings to plumbing and piping systems StandardsRuling 18: Unconcealed storage water containers (Ruling to AS 3500.41994) RUL PL.192002 Rulings to plumbing and piping systems StandardsRuling 19: Layout and size (Ruling to AS 3500.41994) RUL PL.202002 Rulings to plumbing and piping systems StandardsRuling 20: Size of drainage vents (Ruling to AS 3500.2 1990) RUL PL.212002 Rulings to plumbing and piping systems StandardsRuling 21: Size and material (Ruling to AS 3500.41994) RUL PL.222002 Rulings to plumbing and piping systems StandardsRuling 22: Size and material and installation (Ruling to AS 3500.41994) RUL PL.232002 Rulings to plumbing and piping systems StandardsRuling 23: Tundish drain lines (Ruling to AS 3500.4 1994) RUL PL.242002 Rulings to plumbing and piping systems StandardsRuling 24: Thermostatic mixing valves (Ruling to AS 3500.41994) RUL PL.252002 Rulings to plumbing and piping systems StandardsRuling 25: Table 4.1 (Ruling to AS 3500.41994) RUL PL.262002 Rulings to plumbing and piping systems StandardsRuling 26: Local authority water supply to properties with treatment plants (Ruling to AS 3500.11992) RUL PL.272002 Rulings to plumbing and piping systems StandardsRuling 27: General design requirements for sanitary plumbing systems (Ruling to AS 3500.21990) RUL PL.282002 Rulings to plumbing and piping systems StandardsRuling 28: Materials and products (UPVC) (Ruling to AS 3500.21990) RUL PL.292002 Rulings to plumbing and piping systems StandardsRuling 29: Materials and products (PE-X) (Ruling to AS 3500.11992) RUL PL.302002 Rulings to plumbing and piping systems StandardsRuling 30: Connection points for short-term sites (Ruling to AS/NZS 3500.2.21996) RUL PL.312002 Rulings to plumbing and piping systems StandardsRuling 31: Location of piping in concrete (Ruling to AS 3500.11992) RUL PL.322002 Rulings to plumbing and piping systems StandardsRuling 32: Sanitary fixtures delivery temperature (Ruling to AS/NZS 3500.4.2:1997) RUL PL.332002 Rulings to plumbing and piping systems StandardsRuling 33: Encasing high-density polyethylene (HDPE) in concrete (Ruling to AS/NZS 3500.2.2:1996) RUL PL.342002 Rulings to plumbing and piping systems StandardsRuling 34: Polypropylene piping type (PP-R) (Ruling to AS/NZS 3500.1.21998) RUL PL.352002 Rulings to plumbing and piping systems StandardsRuling 35: Polypropylene random co-polymer (PP-R) pipe (Ruling to AS/NZS 3500.1.2:1998) RUL PL.362007 Rulings to plumbing and piping systems StandardsHeated water temperature control (Legionella) (Ruling to AS/NZS 3500.4:2003) Electricity supply systems AS 1284.12004 Electricity meteringGeneral purpose induction watthour meters AS 1284.42006 Electricity meteringSocket mounting system AS 1284.10.22006 Electricity meteringData exchange for meter reading, tariff and load controlDirect local data exchange via hand-held unit (HHU)ANSI Standard interface AS 1284.111995 Electricity meteringSingle-phase multifunction watthour meters AS 1284.121995 Electricity meteringPolyphase multifunction (non-demand) watthour meters (Class 1) AS/NZS 1284.13:2002 Electricity meteringIn-service compliance testing AS 1852.8261983 International electrotechnical vocabulary Electrical installations of buildings AS/NZS 2381 Set:2008 Electrical equipment for explosive gas atmospheresSelection, installation and maintenance Set AS/NZS 2381.1:2005 Electrical equipment for explosive gas atmospheresSelection, installation and maintenanceGeneral requirements AS/NZS 2500:2004 Guide to the safe use of electricity in patient care AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
348
SUBJECT INDEX
AS 29432007 Plastics pipes and fittings for gas reticulation Polyamide compounds AS 2944.12007 Plastics pipes and fittings for gas reticulation Polyamide pipes AS 2944.22007 Plastics pipes and fittings for gas reticulation Polyamide fittings AS 45682005 Preparation of a safety and operating plan for gas networks AS 45752005 Gas appliancesQuality of servicing AS 46172004 Manual shut off gas valves AS 46232008 Jointing compounds and materials for use in gas pipe joints AS 46252008 Electronic flame safeguards and flame detectors AS 46452005 Gas distribution network management AS/NZS 4645.1:2008 Gas distribution networksNetwork management AS/NZS 4645.2:2008 Gas distribution networksSteel pipe systems AS 46462004 Gas appliance standardsDefinitions and calculations AS 46472005 Domestic diaphragm gas meters AS 56012004 Gas installations AS 56012002 (AG 6012002) Gas installations PLUMBING AND GAS SET2005 Plumbing and Gas Installations Set AG 8071992 Approval requirements for natural gas flexible hose and hose assemblies for pressures above 2.6 MPa Installations in buildings in general AS 1101.51984 Graphical symbols for general engineering Piping, ducting and mechanical services for buildings AS 13451995 Identification of the contents of pipes, conduits and ducts Lifts. Escalators AS 1735.12003 Lifts, escalators and moving walksGeneral requirements AS 1735.22001 Lifts, escalators and moving walksPassenger and goods liftsElectric AS 1735.21997 Lifts, escalators and moving walksPassenger and goods liftsElectric AS 1735.32002 Lifts, escalators and moving walksPassenger and goods liftsElectrohydraulic AS 1735.41986 Lifts, escalators and moving walks (known as the SAA Lift Code)Service liftsPower-operated AS 1735.52003 Lifts, escalators and moving walksEscalators and moving walks (BS EN 115:1995, MOD) AS 1735.71998 Lifts, escalators and moving walksStairway lifts AS 1735.81986 Lifts, escalators and moving walks (known as the SAA Lift Code)Inclined lifts AS 1735.91994 Lifts, escalators and moving walksSpecial purpose industrial lifts AS 1735.111986 Lifts, escalators and moving walks (known as the SAA Lift Code)Fire-rated landing doors AS 1735.121999 Lifts, escalators and moving walksFacilities for persons with disabilities AS 1735.121994 Lifts, escalators and moving walksFacilities for persons with disabilities AS 1735.141998 Lifts, escalators and moving walksLow-rise platforms for passengers AS 1735.152002 Lifts, escalators and moving walksLow rise passenger liftsNon-automatically controlled AS 1735.161993 Lifts, escalators and moving walksLifts for persons with limited mobilityRestricted useAutomatically controlled AS 1735.171995 Lifts, escalators and moving walksLifts for people with limited mobilityRestricted useWater-drive AS/NZS 1735.18:2002 Lifts, escalators and moving walks Passenger lifts for private residenceAutomatically controlled AS 38601991 Fixed guideway people movers AS/NZS 4431:1996 Guidelines for safe working on new lift installations in new constructions AS ISO 187382005 Lifts (elevators)Measurement of lift ride quality Other installations in buildings AS 28341995 Computer accommodation AS/NZS 2982.1:1997 Laboratory design and constructionGeneral requirements
INSTALLATIONS IN BUILDINGS
AS 3011.11992 Electrical installationsSecondary batteries installed in buildingsVented cells AS 3011.21992 Electrical installationsSecondary batteries installed in buildingsSealed cells HB 27:1996 Handbook for field testing of balanced cable installations HB 292007 Communications cabling manualModule 2: Communications cabling handbook Sanitary installations AS 1172.12005 Water closets (WC)Pans AS 1172.21999 Water closet (WC) pans of 6/3 L capacity or proven equivalentCisterns AS/NZS 1229:2002 Laundry troughs and tubs AS 13711973 Toilet seats of moulded plastics AS/NZS 1730:1996 Washbasins AS 17561999 Household sinks AS 19761992 Vitreous china used in sanitary appliances AS/NZS 2023:1995 Baths for ablutionary purposes AS/NZS 3350.2.60:2000 Safety of household and similar electrical appliancesParticular requirementsWhirlpool baths (IEC 60335-2-60:1997, MOD) AS/NZS 3350.2.84:2000 Safety of household and similar electrical appliancesParticular requirementsToilets (IEC 60335-284:1998, MOD) AS 34941997 Bidettes and bidets AS/NZS 3500 (Set):2003 Plumbing and drainage Set AS/NZS 3500.0:2003 Plumbing and drainageGlossary of terms AS/NZS 3500.0:1995 National Plumbing and Drainage Code Glossary of terms AS/NZS 3500.2:2003 Plumbing and drainageSanitary plumbing and drainage AS 3500.21990 National Plumbing and Drainage CodeSanitary plumbing and sanitary drainage AS 3500.2.11996 National Plumbing and DrainageSanitary plumbing and drainagePerformance requirements AS/NZS 3500.2.2:1996 National Plumbing and Drainage- Sanitary plumbing and drainageAcceptable solutions AS 3500.31990 National Plumbing and Drainage Code Stormwater drainage AS/NZS 3500.4:2003 Plumbing and drainageHeated water services AS/NZS 3500.5:2000 National Plumbing and DrainageDomestic installations AS 3558.02006 Methods of testing plastics and composite materials for use in sanitary plumbing fixturesIntroduction and list of methods AS 3558.11999 Methods of testing plastics and composite materials sanitary plumbing and fixturesDetermination of water absorption characteristics AS 3558.21999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of chemical and stain resistance AS 3558.31999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of colour fastness AS 3558.41999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of resistance to surface scratching AS 3558.51999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of degradation by ultraviolet light AS 3558.61999 Methods of testing plastics and composite materials sanitary plumbing fixturesVisual examination of surface finish for defects AS 3558.71999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of impact resistance of laundry troughs AS 3558.81999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of resistance to thermal shock of laundry troughs AS 3558.91999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of thermal distortion of laundry troughs AS 3558.101999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of thermal expansion under load of laundry troughs
349
INSTALLATIONS IN BUILDINGS
SUBJECT INDEX
ATS 5200.0332004 Technical Specification for plumbing and drainage productsSpraying apparatus/dispensing units with the option of chemical additionsHose connected ATS 5200.037.12006 Technical Specification for plumbing and drainage productsFlow controllersFor controlling flows in cold or heated water systems AS 5200.037.22008 Plumbing and drainage productsFlow controllers for use with heated or cold water systems ATS 5200.0402005 Technical Specification for plumbing and drainage productsWaste pipe connection outlets and gratings, separate or integral ATS 5200.0422004 Technical Specification for plumbing and drainage productsRoll-grooved jointing systems ATS 5200.0462005 Technical Specification for plumbing and drainage productsDiversion systemsWash down and first flush ATS 5200.0472005 Technical Specification for plumbing and drainage productsSelf-sealing devices ATS 5200.0502005 Technical Specification for plumbing and drainage productsPrefabricated bathroom modules ATS 5200.0512005 Technical Specification for plumbing and drainage productsBidet douche seats ATS 5200.0522005 Technical Specification for plumbing and drainage productsMetallic-bodied inlet pressure control valves greater than DN50 AS 5200.0532008 Plumbing and drainage productsStainless steel pipes and tubes for pressure applications ATS 5200.0532006 Technical Specification for plumbing and drainage productsStainless steel pipes and tubes ATS 5200.1042005 Technical Specification for plumbing and drainage productsAppliances (miscellaneous) ATS 5200.4202005 Technical Specification for plumbing and drainage productsTrap-priming valves ATS 5200.4532004 Technical Specification for plumbing and drainage productsHeated water systemsThermostatic circulation valve AS 5200.4582008 Plumbing and drainage productsUniversal plastic-bodied transition couplings ATS 5200.4592004 Technical Specification for plumbing and drainage productsWaterless urinalsWall hung (Level 1) ATS 5200.4602005 Technical Specification for plumbing and drainage productsGrey water diversion device (GWDD) ATS 5200.4612004 Technical Specification for plumbing and drainage productsStainless steel tubes and mechanical compression fittings for pressure applications ATS 5200.4632005 Technical Specification for plumbing and drainage productsPositive air pressure attenuator ATS 5200.4642004 Technical Specification for plumbing and drainage productsHot water manual or sensor-activated pumping systems ATS 5200.4662004 Technical Specification for plumbing and drainage productsRainwater tank connection devices ATS 5200.4672004 Technical Specification for plumbing and drainage productsRainwater tank connection valve ATS 5200.4682005 Technical Specification for plumbing and drainage productsHot water systemsRecirculation valves ATS 5200.4692005 Technical Specification for plumbing and drainage productsWaterless or limited flush urinalsWith an integral sealing device ATS 5200.4712005 Technical specification for plumbing and drainage productsStainless steel tubes and mechanical compression fittings for pressure applicationsAlternative systems ATS 5200.4722006 Technical Specification for plumbing and drainage productsHeated water system recirculation device ATS 5200.4732007 Technical Specification for plumbing and drainage productsStainless steel/nano-antibiotic PP-R pipe systems for water supply applications ATS 5200.4752006 Technical Specification for plumbing and drainage productsHeated Water SystemsCold water recovery device ATS 5200.4762006 Technical Specification for plumbing and drainage productsHeated water systemsLeak protection device ATS 5200.4782006 Technical Specification for plumbing and drainage productsCross-linked polyethylene/Aluminium/Crosslinked polyethylene macro-composite pipe systems for pressure applications
AS 3558.111999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of impact resistance of baths for ablutionary purposes AS 3558.121999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of resistance to thermal shock of baths for ablutionary purposes AS 3558.131999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of thermal distortion of baths for ablutionary purposes AS 3558.141999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of thermal expansion under load of baths for ablutionary purposes AS 3558.151999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of impact resistance of washbasins AS 3558.161999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of resistance to thermal shock of washbasins AS 3558.171999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of impact resistance of shower bases and shower modules AS 3558.181999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of resistance to thermal shock of shower bases and shower modules AS 3558.191999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of impact resistance of sinks AS 3558.201999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of resistance to thermal shock of sinks AS 3558.211999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of thermal expansion under load of sinks AS 3558.221999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of thermal distortion of sinks AS 3558.231999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of resistance to heat of the surface of sinks AS 3558.241999 Methods of testing plastics and composite materials sanitary plumbing fixturesDetermination of resistance to hot liquids of the surface of sinks AS 35881996 Shower bases and shower modules AS/NZS 3662:2005 Performance of showers for bathing AS/NZS 3718:2005 Water supplyTap ware AS 38611991 Spa baths AS/NZS 3982:1996 Urinals AS 40231992 Non-vitreous china used in sanitary appliances AS 5200.0002006 Technical specification for plumbing and drainage productsProcedures for certification of plumbing and drainage products ATS 5200.0042005 Technical Specification for plumbing and drainage productsUrinal flushing cisterns AS 5200.0072008 Plumbing and drainage productsMetal-bodied water hammer arresters ATS 5200.0072004 Technical Specification for plumbing and drainage productsWater hammer arrestors ATS 5200.0122005 Technical Specification for plumbing and drainage productsIn-line valves for use in plumbing water supply systemsMiscellaneous types metallic and non-metallic ATS 5200.0142004 Technical Specification for plumbing and drainage productsJointing materials ATS 5200.0162005 Technical Specification for plumbing and drainage productsCistern inlet valves ATS 5200.0172005 Technical Specification for plumbing and drainage productsCistern outlet valves ATS 5200.0202004 Technical Specification for plumbing and drainage productsFlushing valves for water closets and urinalsfor use with mains supply ATS 5200.0212004 Technical Specification for plumbing and drainage productsFlushing valves for water closets and urinalsfor use with break tank supply ATS 5200.0262004 Technical Specification for plumbing and drainage productsCold water storage tanks ATS 5200.0302007 Technical Specification for plumbing and drainage productsSolenoid valves
350
SUBJECT INDEX
ATS 5200.4792006 Technical Specification for plumbing and drainage productsFlood stop safety valve ATS 5200.4812006 Technical Specification for plumbing and drainage productsThermal switching valves ATS 5200.4822006 Technical Specification for plumbing and drainage productsSoil waste dump fitting ATS 5200.4852006 Technical Specification for plumbing and drainage productsPressure compensating tank ATS 5200.4902007 Technical Specification for plumbing and drainage productsCross-linked polyethylene/aluminium/polyethylene-composite pipe systems for pressure applications ATS 5200.9992005 Technical Specification for plumbing and drainage productsDeveloping technical specifications AS/NZS 6400:2005 Water efficient productsRating and labelling AS/NZS 6400:2003 Water efficient productsRating and labelling AS/NZS 60335.2.60:2006 Household and similar electrical appliancesSafetyParticular requirements for whirlpool baths and whirlpool spas(IEC 60335-2-60 Ed 3.1, MOD) AS/NZS 60335.2.84:2006 Household and Similar Electrical AppliancesSafetyParticular requirements for toilets AS/NZS 60335.2.105:2006 Household and Similar Electrical AppliancesSafetyParticular requirements for multifunctional shower cabinets PLUMBING AND GAS SET2005 Plumbing and Gas Installations Set HB 5.11991 Australian Standards for plumbing studentsTrade Course HB 3262008 Urban Greywater Installation Handbook for Single Households MP 522005 Manual of authorization procedures for plumbing and drainage products MP 522001 Manual of authorization procedures for plumbing and drainage products MP 781999 Manual for the assessment of risks of plumbing products RUL PL.02002 Rulings to plumbing and piping systems StandardsPart 0: Introduction and list of rulings RUL PL.12002 Rulings to plumbing and piping systems StandardsRuling 1: Installation of backflow prevention devices (Ruling to AS 3500.11992) RUL PL.22002 Rulings to plumbing and piping systems StandardsRuling 2: Baths (Ruling to AS 3500.21990) RUL PL.32002 Rulings to plumbing and piping systems StandardsRuling 3: Terminal fittings (Ruling to AS 3500.41994) RUL PL.42002 Rulings to plumbing and piping systems StandardsRuling 4: Water storage and break tanks (Ruling to AS 3500.11992) RUL PL.52002 Rulings to plumbing and piping systems StandardsRuling 5: Installation of cisterns (Ruling to AS 3500.1 1992) RUL PL.62002 Rulings to plumbing and piping systems StandardsRuling 6: Upstream vent (Ruling to AS 3500.21990) RUL PL.72002 Rulings to plumbing and piping systems StandardsRuling 7: Upstream vent (Ruling to AS 3500.21990) RUL PL.82002 Rulings to plumbing and piping systems StandardsRuling 8: External hose taps (Ruling to AS 3500.11992) RUL PL.92002 Rulings to plumbing and piping systems StandardsCopper pipes and copper fittings (Ruling to AS 3500.2 1990) RUL PL.102002 Rulings to plumbing and piping systems StandardsRuling 10: Minimum thickness for thermal insulation (Ruling to AS 3500.41994) RUL PL.112002 Rulings to plumbing and piping systems StandardsRuling 11: DN 80 stack with the top section graded installed in a Class 1 to 4 building (Ruling to AS 3500.21990) RUL PL.122002 Rulings to plumbing and piping systems StandardsRuling 12: Drains in landslip areas (Ruling to AS 3500.2 1990) RUL PL.132002 Rulings to plumbing and piping systems StandardsRuling 13: Drains in landslip areas (Ruling to AS 3500.3 1990) RUL PL.142002 Rulings to plumbing and piping systems StandardsRuling 14: Cooling towers (Ruling to AS 3500.11992) RUL PL.152002 Rulings to plumbing and piping systems StandardsRuling 15: Graded discharge pipes (Ruling to AS 3500.21990)
INSTALLATIONS IN BUILDINGS
RUL PL.162002 Rulings to plumbing and piping systems StandardsRuling 16: Sanitary fixtures delivery temperature (Ruling to AS 3500.41994) RUL PL.172002 Rulings to plumbing and piping systems StandardsRuling 17: Installation (Ruling to AS 3500.41994) RUL PL.182002 Rulings to plumbing and piping systems StandardsRuling 18: Unconcealed storage water containers (Ruling to AS 3500.41994) RUL PL.192002 Rulings to plumbing and piping systems StandardsRuling 19: Layout and size (Ruling to AS 3500.41994) RUL PL.202002 Rulings to plumbing and piping systems StandardsRuling 20: Size of drainage vents (Ruling to AS 3500.2 1990) RUL PL.212002 Rulings to plumbing and piping systems StandardsRuling 21: Size and material (Ruling to AS 3500.41994) RUL PL.222002 Rulings to plumbing and piping systems StandardsRuling 22: Size and material and installation (Ruling to AS 3500.41994) RUL PL.232002 Rulings to plumbing and piping systems StandardsRuling 23: Tundish drain lines (Ruling to AS 3500.4 1994) RUL PL.242002 Rulings to plumbing and piping systems StandardsRuling 24: Thermostatic mixing valves (Ruling to AS 3500.41994) RUL PL.252002 Rulings to plumbing and piping systems StandardsRuling 25: Table 4.1 (Ruling to AS 3500.41994) RUL PL.262002 Rulings to plumbing and piping systems StandardsRuling 26: Local authority water supply to properties with treatment plants (Ruling to AS 3500.11992) RUL PL.272002 Rulings to plumbing and piping systems StandardsRuling 27: General design requirements for sanitary plumbing systems (Ruling to AS 3500.21990) RUL PL.282002 Rulings to plumbing and piping systems StandardsRuling 28: Materials and products (UPVC) (Ruling to AS 3500.21990) RUL PL.292002 Rulings to plumbing and piping systems StandardsRuling 29: Materials and products (PE-X) (Ruling to AS 3500.11992) RUL PL.302002 Rulings to plumbing and piping systems StandardsRuling 30: Connection points for short-term sites (Ruling to AS/NZS 3500.2.21996) RUL PL.312002 Rulings to plumbing and piping systems StandardsRuling 31: Location of piping in concrete (Ruling to AS 3500.11992) RUL PL.322002 Rulings to plumbing and piping systems StandardsRuling 32: Sanitary fixtures delivery temperature (Ruling to AS/NZS 3500.4.2:1997) RUL PL.332002 Rulings to plumbing and piping systems StandardsRuling 33: Encasing high-density polyethylene (HDPE) in concrete (Ruling to AS/NZS 3500.2.2:1996) RUL PL.342002 Rulings to plumbing and piping systems StandardsRuling 34: Polypropylene piping type (PP-R) (Ruling to AS/NZS 3500.1.21998) RUL PL.352002 Rulings to plumbing and piping systems StandardsRuling 35: Polypropylene random co-polymer (PP-R) pipe (Ruling to AS/NZS 3500.1.2:1998) RUL PL.362007 Rulings to plumbing and piping systems StandardsHeated water temperature control (Legionella) (Ruling to AS/NZS 3500.4:2003) AG 1121998 Approval requirements for incinerating toilets Ventilation and air-conditioning systems AS 1324.12001 Air filters for use in general ventilation and airconditioningApplication, performance and construction AS 1324.22003 Air filters for use in general ventilation and airconditioningMethods of test AS/NZS 1668 Set:2005 The use of Ventilation and Air-conditioning in buildings Set AS/NZS 1668.1:1998 The use of ventilation and airconditioning in buildingsFire and smoke control in multi-compartment buildings AS 1668.11991 The use of mechanical ventilation and airconditioning in buildingsFire and smoke control AS 1668.22002 The use of ventilation and airconditioning in buildingsVentilation design for indoor air contaminant control AS 1668.21991 The use of mechanical ventilation and airconditioning in buildingsMechanical ventilation for acceptable indoor-air quality
351
INSTALLATIONS IN BUILDINGS
SUBJECT INDEX
AS/NZS 3350.2.35:1999 Safety of household and similar electrical appliancesParticular requirementsInstantaneous water heaters AS/NZS 3350.2.51:1998 Safety of household and similar electrical appliancesParticular requirementsStationary circulation pumps for heating and service water installations AS 34982003 Authorization requirements for plumbing products Water heaters and hot-water storage tanks AS 34981995 Authorization requirements for plumbing products Water heaters and hot-water storage tanks AS 3500.41994 National Plumbing and Drainage CodeHot water supply systems AS 3500.4.11997 National Plumbing and DrainageHot water supply systemsPerformance requirements AS/NZS 3500.4.2:1997 National Plumbing and DrainageHot water supply systemsAcceptable solutions AS/NZS 4234:2008 Heated water systemsCalculation of energy consumption AS 42341994 Solar water heatersDomestic and heat pump Calculation of energy consumption AS/NZS 4445.1:1997 Solar heatingDomestic water heating systemsPerformance rating procedure using indoor test methods AS 45522005 Gas fired water heaters for hot water supply and/or central heating AS/NZS 4692.1:2005 Electric water heatersEnergy consumption, performance and general requirements AS/NZS 4692.2:2005 Electric water heatersMinimum Energy Performance Standard (MEPS) requirements and energy labelling ATS 5200.4722006 Technical Specification for plumbing and drainage productsHeated water system recirculation device ATS 5200.4812006 Technical Specification for plumbing and drainage productsThermal switching valves AS/NZS 60335.2.21:2002 Household and similar electrical appliancesSafetyParticular requirementsParticular requirements for storage water heaters AS/NZS 60335.2.35:2004 Household and similar electrical appliancesSafety- Particular requirements for instantaneous water heaters (IEC 60335-2-35 Ed 4.1, IDT) AS/NZS 60335.2.51:2006 Household and similar electrical appliancesSafetyParticular requirements for stationary circulation pumps for heating and service water installations (IEC 60335-251 Ed 3, IDT) HB 2632004 Heated water systems Water supply systems AS 16281999 Water supplyMetallic gate, globe and non-return valves AS 23681990 Test pumping of water wells AS/NZS 3497:1998 Drinking water treatment unitsPlumbing requirements AS/NZS 3499:2006 Water supplyFlexible hose assemblies AS/NZS 3499:1997 Flexible tube connectors for water supply AS/NZS 3500 (Set):2003 Plumbing and drainage Set AS/NZS 3500.0:2003 Plumbing and drainageGlossary of terms AS/NZS 3500.0:1995 National Plumbing and Drainage Code Glossary of terms AS/NZS 3500.1:2003 Plumbing and drainageWater services AS 3500.11992 National Plumbing and Drainage CodeWater supply AS 3500.1.11998 National plumbing and drainageWater supply Performance requirements AS/NZS 3500.1.2:1998 National plumbing and drainageWater supplyAcceptable solutions AS/NZS 3500.2:2003 Plumbing and drainageSanitary plumbing and drainage AS 3500.21990 National Plumbing and Drainage CodeSanitary plumbing and sanitary drainage AS 3500.2.11996 National Plumbing and DrainageSanitary plumbing and drainagePerformance requirements AS/NZS 3500.2.2:1996 National Plumbing and Drainage- Sanitary plumbing and drainageAcceptable solutions AS/NZS 3500.3:2003 Plumbing and drainageStormwater drainage AS 3500.31990 National Plumbing and Drainage Code Stormwater drainage AS 3500.3.11998 National plumbing and drainageStormwater drainagePerformance requirements AS/NZS 3500.3.2:1998 National plumbing and drainage Stormwater drainageAcceptable solutions
AS 1668.2 Supplement 12002 The use of ventilation and airconditioning in buildingsVentilation design for indoor air contaminant control (Supplement to AS 1668.22002) AS 1668.2 Supplement 11991 The use of mechanical ventilation and air-conditioning in buildingsMechanical ventilation for acceptable indoor-air qualityCommentary (Supplement to AS 1668.21991) AS 1668.32001 The use of ventilation and airconditioning in buildingsSmoke control systems for large single compartments or smoke reservoirs AS 1682.11990 Fire dampersSpecification AS 1682.21990 Fire dampersInstallation AS 24272004 Smoke/heat release vents AS 2428.12004 Methods of testing smoke/heat release vents Determination of resistance to leakage during rain AS 2428.22004 Methods of testing smoke/heat release vents Determination of ability to operate under wind loading AS 2428.32004 Methods of testing smoke/heat release vents Determination of operating characteristics AS 2428.42004 Methods of testing smoke/heat release vents Determination of the effect of flame contact AS 2428.52004 Methods of testing smoke/heat release vents Determination of discharge coefficient and effective aerodynamic area AS 2428.62004 Methods of testing smoke/heat release vents Determination of ability to operate under snow loading AS/NZS 3666 Set:2006 Air-handling and water systems of buildings Set AS/NZS 3666.1:2002 Air-handling and water systems of buildings Microbial controlDesign, installation and commissioning AS/NZS 3666.1:1995 Air-handling and water systems of buildings Microbial controlDesign, installation and commissioning AS/NZS 3666.2:2002 Air-handling and water systems of buildings Microbial controlOperation and maintenance AS/NZS 3666.2:1995 Air-handling and water systems of buildings Microbial controlOperation and maintenance AS/NZS 3666.3:2000 Air-handling and water systems of buildings Microbial controlPerformance-based maintenance of cooling water systems AS 4180.12008 Measurement of drift loss from cooling towers Chloride balance method AS 4180.22008 Measurement of drift loss from cooling towers Lost chloride method AS 42542002 Ductwork for air-handling systems in buildings AS 42541995 Ductwork for air-handling systems in buildings AS 45081999 Thermal resistance of insulation for ductwork used in building airconditioning AS 50592006 Power station cooling tower water systems Management of legionnaires disease health risk HB 32:1995 Control of microbial growth in air-handling and water systems of buildings HB 2762004 A Guide to Good Practice for Energy Efficient Installation of Residential Heating, Cooling & Air Conditioning Plant & Equipment Water heating equipment AS 1056.11991 Storage water heatersGeneral requirements AS 1056.21985 Storage water heatersSpecific requirements for water heaters with single shells AS 1056.31991 Storage water heatersSpecific requirements for water heaters with composite shells AS/NZS 1056.4:1997 Storage water heatersDaily energy consumption calculations for electric types AS 13081987 Electric water heatersThermostats and thermal cutouts AS 1357.12004 Valves primarily for use in heated water systems Protection valves AS 1357.22005 Valves primarily for use in heated water systems Control valves AS 13611995 Electric heat-exchange water heatersFor domestic applications AS/NZS 2712:2007 Solar and heat pump water heatersDesign and construction AS 29841987 Solar water heatersMethod of test for thermal performanceOutdoor test method AS/NZS 3350.2.21:1999 Safety of household and similar electrical appliancesParticular requirementsStorage water heaters
352
SUBJECT INDEX
AS/NZS 3500.4:2003 Plumbing and drainageHeated water services AS 3500.41994 National Plumbing and Drainage CodeHot water supply systems AS 3500.4.11997 National Plumbing and DrainageHot water supply systemsPerformance requirements AS/NZS 3500.4.2:1997 National Plumbing and DrainageHot water supply systemsAcceptable solutions AS/NZS 3500.5:2000 National Plumbing and DrainageDomestic installations AS/NZS 3662:2005 Performance of showers for bathing AS 36882005 Water supplyMetallic fittings and end connectors AS 4032.12005 Water supplyValves for the control of heated water supply temperaturesThermostatic mixing valvesMaterials design and performance requirements AS 4032.22005 Water supplyValves for the control of hot water supply temperaturesTempering valves and end-of-line temperature-actuated devices AS 4032.32004 Water supplyValves for the control of hot water supply temperaturesRequirements for field testing, maintenance or replacment of thermostatic mixing valves, tempering valves and end of line temperature control devices AS 40872004 Metallic flanges for waterworks purposes AS 47952006 Butterfly valves for waterworks purposes AS 47952002 Double-flanged butterfly valves for waterworks purposes AS 48832008 Air valves for sewerage AS 5200.0002006 Technical specification for plumbing and drainage productsProcedures for certification of plumbing and drainage products ATS 5200.0042005 Technical Specification for plumbing and drainage productsUrinal flushing cisterns ATS 5200.0062005 Technical Specification for plumbing and drainage productsReflux valvesSewerage AS 5200.0072008 Plumbing and drainage productsMetal-bodied water hammer arresters ATS 5200.0072004 Technical Specification for plumbing and drainage productsWater hammer arrestors ATS 5200.0122005 Technical Specification for plumbing and drainage productsIn-line valves for use in plumbing water supply systemsMiscellaneous types metallic and non-metallic ATS 5200.0142004 Technical Specification for plumbing and drainage productsJointing materials ATS 5200.0162005 Technical Specification for plumbing and drainage productsCistern inlet valves ATS 5200.0172005 Technical Specification for plumbing and drainage productsCistern outlet valves ATS 5200.0202004 Technical Specification for plumbing and drainage productsFlushing valves for water closets and urinalsfor use with mains supply ATS 5200.0212004 Technical Specification for plumbing and drainage productsFlushing valves for water closets and urinalsfor use with break tank supply ATS 5200.0262004 Technical Specification for plumbing and drainage productsCold water storage tanks ATS 5200.0282004 Technical Specification for plumbing and drainage productsCommercial food waste disposal unit ATS 5200.0302007 Technical Specification for plumbing and drainage productsSolenoid valves ATS 5200.0332004 Technical Specification for plumbing and drainage productsSpraying apparatus/dispensing units with the option of chemical additionsHose connected ATS 5200.037.12006 Technical Specification for plumbing and drainage productsFlow controllersFor controlling flows in cold or heated water systems AS 5200.037.22008 Plumbing and drainage productsFlow controllers for use with heated or cold water systems ATS 5200.037.22005 Technical Specification for plumbing and drainage productsFlow controllersFor use in heated or cold water plumbing systems ATS 5200.0402005 Technical Specification for plumbing and drainage productsWaste pipe connection outlets and gratings, separate or integral ATS 5200.0422004 Technical Specification for plumbing and drainage productsRoll-grooved jointing systems ATS 5200.0502005 Technical Specification for plumbing and drainage productsPrefabricated bathroom modules
INSTALLATIONS IN BUILDINGS
ATS 5200.0522005 Technical Specification for plumbing and drainage productsMetallic-bodied inlet pressure control valves greater than DN50 AS 5200.0532008 Plumbing and drainage productsStainless steel pipes and tubes for pressure applications ATS 5200.1012005 Technical Specification for plumbing and drainage productsAppliances (low hazard rating) ATS 5200.1032004 Technical Specification for plumbing and drainage productsWater treatment systems (other than those specified in AS/NZS3497) ATS 5200.1042005 Technical Specification for plumbing and drainage productsAppliances (miscellaneous) ATS 5200.1052005 Technical Specification for plumbing and drainage productsAppliancesBeverage dispensers and icemakers ATS 5200.4202005 Technical Specification for plumbing and drainage productsTrap-priming valves AS 5200.4582008 Plumbing and drainage productsUniversal plastic-bodied transition couplings ATS 5200.4582004 Technical Specification for plumbing and drainage productsUniversal transition fitting ATS 5200.4592004 Technical Specification for plumbing and drainage productsWaterless urinalsWall hung (Level 1) ATS 5200.4602005 Technical Specification for plumbing and drainage productsGrey water diversion device (GWDD) ATS 5200.4612004 Technical Specification for plumbing and drainage productsStainless steel tubes and mechanical compression fittings for pressure applications ATS 5200.4632005 Technical Specification for plumbing and drainage productsPositive air pressure attenuator ATS 5200.4642004 Technical Specification for plumbing and drainage productsHot water manual or sensor-activated pumping systems ATS 5200.4662004 Technical Specification for plumbing and drainage productsRainwater tank connection devices ATS 5200.4672004 Technical Specification for plumbing and drainage productsRainwater tank connection valve ATS 5200.4712005 Technical specification for plumbing and drainage productsStainless steel tubes and mechanical compression fittings for pressure applicationsAlternative systems ATS 5200.4722006 Technical Specification for plumbing and drainage productsHeated water system recirculation device ATS 5200.4732007 Technical Specification for plumbing and drainage productsStainless steel/nano-antibiotic PP-R pipe systems for water supply applications ATS 5200.4752006 Technical Specification for plumbing and drainage productsHeated Water SystemsCold water recovery device ATS 5200.4792006 Technical Specification for plumbing and drainage productsFlood stop safety valve ATS 5200.4812006 Technical Specification for plumbing and drainage productsThermal switching valves ATS 5200.4822006 Technical Specification for plumbing and drainage productsSoil waste dump fitting ATS 5200.4852006 Technical Specification for plumbing and drainage productsPressure compensating tank ATS 5200.4862008 Technical Specification for plumbing and drainage productsSprinklers for home applications ATS 5200.4902007 Technical Specification for plumbing and drainage productsCross-linked polyethylene/aluminium/polyethylene-composite pipe systems for pressure applications ATS 5200.9992005 Technical Specification for plumbing and drainage productsDeveloping technical specifications AS/NZS 6400:2005 Water efficient productsRating and labelling AS/NZS 6400:2003 Water efficient productsRating and labelling AS 64012003 Knife gate valves for waterworks purposes CD DOMESTIC2007 Domestic Building Standards CD PLUMBING AND GAS SET2005 Plumbing and Gas Installations Set HB 5.11991 Australian Standards for plumbing studentsTrade Course HB 2302008 Rainwater Tank Design and Installation Handbook HB 2302006 Rainwater Tank Design and Installation Handbook HB 2632004 Heated water systems HB 3262008 Urban Greywater Installation Handbook for Single Households
353
INSULATING FLUIDS
SUBJECT INDEX
RUL PL.282002 Rulings to plumbing and piping systems StandardsRuling 28: Materials and products (UPVC) (Ruling to AS 3500.21990) RUL PL.292002 Rulings to plumbing and piping systems StandardsRuling 29: Materials and products (PE-X) (Ruling to AS 3500.11992) RUL PL.302002 Rulings to plumbing and piping systems StandardsRuling 30: Connection points for short-term sites (Ruling to AS/NZS 3500.2.21996) RUL PL.312002 Rulings to plumbing and piping systems StandardsRuling 31: Location of piping in concrete (Ruling to AS 3500.11992) RUL PL.322002 Rulings to plumbing and piping systems StandardsRuling 32: Sanitary fixtures delivery temperature (Ruling to AS/NZS 3500.4.2:1997) RUL PL.332002 Rulings to plumbing and piping systems StandardsRuling 33: Encasing high-density polyethylene (HDPE) in concrete (Ruling to AS/NZS 3500.2.2:1996) RUL PL.342002 Rulings to plumbing and piping systems StandardsRuling 34: Polypropylene piping type (PP-R) (Ruling to AS/NZS 3500.1.21998) RUL PL.352002 Rulings to plumbing and piping systems StandardsRuling 35: Polypropylene random co-polymer (PP-R) pipe (Ruling to AS/NZS 3500.1.2:1998) RUL PL.362007 Rulings to plumbing and piping systems StandardsHeated water temperature control (Legionella) (Ruling to AS/NZS 3500.4:2003) INSULATING FLUIDS Insulating fluids in general AS 1767.11999 Insulating liquidsSpecification for unused mineral insulating oils for transformers and switchgear AS 1767.2.11999 Insulating liquidsTest MethodsDetermination of the breakdown voltage at power frequency AS 1767.2.22008 Insulating liquidsTest methodsMeasurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity AS 1767.2.31999 Insulating liquidsTest methodsMethod of sampling liquid dielectrics AS 1767.2.41999 Insulating liquidsTest methodsDetection and determination of specified anti-oxidant additives in insulating oils AS 1767.2.51999 Insulating liquidsTest methodsUnused hydrocarbon based insulating liquidsTest methods for evaluating the oxidation stability AS 1767.2.71999 Insulating liquidsTest methodsDetermination of PCB contamination in insulating liquids by capillary column gas chromatographyIdentification of congeners AS 1767.2.82008 Insulating liquidsTest methodsDetermination of water in oil-impregnated paper and pressboard by automatic coulometric Karl Fischer titration (IEC 60814, Ed. 2.0 (1997) MOD) Insulating oils AS 1767.2.22008 Insulating liquidsTest methodsMeasurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity AS 1767.2.82008 Insulating liquidsTest methodsDetermination of water in oil-impregnated paper and pressboard by automatic coulometric Karl Fischer titration (IEC 60814, Ed. 2.0 (1997) MOD) AS 18831992 Guide to maintenance and supervision of insulating oils in service INSULATING MATERIALS Insulating materials in general AS 1147.11989 Electrical equipment for coal minesInsulating materialsMaterials for insulating power conducting components AS/NZS 3121:2002 Approval and test specificationInsulating mouldings AS/NZS 3808:2000 Insulating and sheathing materials for electric cables AS 42021994 Insulating covers for electrical purposes AS/NZS 4805.1:2007 Accessories for electric cablesTest requirementsPower cables with extruded insulation for rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV AS/NZS 4805.2:2007 Accessories for electric cablesTest requirementsImpregnated paper-insulated metal-sheathed cables for rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV (excluding gas-pressure and oil-filled cables) AS/NZS 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
MP 522005 Manual of authorization procedures for plumbing and drainage products MP 522001 Manual of authorization procedures for plumbing and drainage products MP 781999 Manual for the assessment of risks of plumbing products RUL PL.02002 Rulings to plumbing and piping systems StandardsPart 0: Introduction and list of rulings RUL PL.12002 Rulings to plumbing and piping systems StandardsRuling 1: Installation of backflow prevention devices (Ruling to AS 3500.11992) RUL PL.22002 Rulings to plumbing and piping systems StandardsRuling 2: Baths (Ruling to AS 3500.21990) RUL PL.32002 Rulings to plumbing and piping systems StandardsRuling 3: Terminal fittings (Ruling to AS 3500.41994) RUL PL.42002 Rulings to plumbing and piping systems StandardsRuling 4: Water storage and break tanks (Ruling to AS 3500.11992) RUL PL.52002 Rulings to plumbing and piping systems StandardsRuling 5: Installation of cisterns (Ruling to AS 3500.1 1992) RUL PL.62002 Rulings to plumbing and piping systems StandardsRuling 6: Upstream vent (Ruling to AS 3500.21990) RUL PL.72002 Rulings to plumbing and piping systems StandardsRuling 7: Upstream vent (Ruling to AS 3500.21990) RUL PL.82002 Rulings to plumbing and piping systems StandardsRuling 8: External hose taps (Ruling to AS 3500.11992) RUL PL.92002 Rulings to plumbing and piping systems StandardsCopper pipes and copper fittings (Ruling to AS 3500.2 1990) RUL PL.102002 Rulings to plumbing and piping systems StandardsRuling 10: Minimum thickness for thermal insulation (Ruling to AS 3500.41994) RUL PL.112002 Rulings to plumbing and piping systems StandardsRuling 11: DN 80 stack with the top section graded installed in a Class 1 to 4 building (Ruling to AS 3500.21990) RUL PL.122002 Rulings to plumbing and piping systems StandardsRuling 12: Drains in landslip areas (Ruling to AS 3500.2 1990) RUL PL.132002 Rulings to plumbing and piping systems StandardsRuling 13: Drains in landslip areas (Ruling to AS 3500.3 1990) RUL PL.142002 Rulings to plumbing and piping systems StandardsRuling 14: Cooling towers (Ruling to AS 3500.11992) RUL PL.152002 Rulings to plumbing and piping systems StandardsRuling 15: Graded discharge pipes (Ruling to AS 3500.21990) RUL PL.162002 Rulings to plumbing and piping systems StandardsRuling 16: Sanitary fixtures delivery temperature (Ruling to AS 3500.41994) RUL PL.172002 Rulings to plumbing and piping systems StandardsRuling 17: Installation (Ruling to AS 3500.41994) RUL PL.182002 Rulings to plumbing and piping systems StandardsRuling 18: Unconcealed storage water containers (Ruling to AS 3500.41994) RUL PL.192002 Rulings to plumbing and piping systems StandardsRuling 19: Layout and size (Ruling to AS 3500.41994) RUL PL.202002 Rulings to plumbing and piping systems StandardsRuling 20: Size of drainage vents (Ruling to AS 3500.2 1990) RUL PL.212002 Rulings to plumbing and piping systems StandardsRuling 21: Size and material (Ruling to AS 3500.41994) RUL PL.222002 Rulings to plumbing and piping systems StandardsRuling 22: Size and material and installation (Ruling to AS 3500.41994) RUL PL.232002 Rulings to plumbing and piping systems StandardsRuling 23: Tundish drain lines (Ruling to AS 3500.4 1994) RUL PL.242002 Rulings to plumbing and piping systems StandardsRuling 24: Thermostatic mixing valves (Ruling to AS 3500.41994) RUL PL.252002 Rulings to plumbing and piping systems StandardsRuling 25: Table 4.1 (Ruling to AS 3500.41994) RUL PL.262002 Rulings to plumbing and piping systems StandardsRuling 26: Local authority water supply to properties with treatment plants (Ruling to AS 3500.11992) RUL PL.272002 Rulings to plumbing and piping systems StandardsRuling 27: General design requirements for sanitary plumbing systems (Ruling to AS 3500.21990)
354
SUBJECT INDEX
AS/NZS 60695.1.1:2001 Fire hazard testingGuidance for assessing the fire hazard of electrotechnical productsGeneral guidelines (IEC 60695-1-1:1999, IDT) AS 60695.1.402006 Fire hazard testingGuidance for assessing the fire hazard of electrotechnical productsInsulating liquids AS/NZS 60695.2.10:2001 Fire hazard testingGlowing/hot wire based test methodsGlow-wire apparatus and common test procedure AS/NZS 60695.2.11:2001 Fire hazard testingGlowing/hot wire based test methodsGlow-wire flammability test method for end-products AS/NZS 60695.2.12:2001 Fire hazard testingGlowing/hot wire based test methodsGlow-wire flammability test method for materials AS/NZS 60695.2.13:2001 Fire hazard testingGlowing/hot wire based test methodsGlow-wire ignitability test method for materials AS 60695.42006 Fire hazard testingTerminology concerning fire tests for electrotechnical products AS 60695.5.12006 Fire hazard testingCorrosion damage effects of fire effluentGeneral guidance AS 60695.5.22006 Fire hazard testingCorrosion damage effects of fire effluentSummary and relevance of test methods AS 60695.5.32006 Fire hazard testingCorrosion damage effects of fire effluentLeakage-current and metal-loss test method AS 60695.6.12006 Fire hazard testingSmoke obscuration General guidance AS 60695.6.22006 Fire hazard testing- Smoke obscuration Summary and relevance of test methods AS 60695.6.302006 Fire hazard testing- Guidance and test methods on the assessment of obscuration hazard of vision caused by smoke opacity from electrotechnical products involved in firesSmall scale static methodDetermination of smoke opacityDescription of the apparatus AS 60695.6.312006 Fire hazard testing- Smoke obscuration Small-scale static testMaterials AS 60695.7.12006 Fire hazard testingToxicity of fire effluent General guidance AS 60695.7.22006 Fire hazard testingToxicity of fire effluent Summary and relevance of test methods AS 60695.7.32006 Fire hazard testingToxicity of fire effluentUse and interpretation of test results AS 60695.7.502006 Fire hazard testingToxicity of fire effluent Estimation of toxic potencyApparatus and test method AS 60695.7.512006 Fire hazard testingToxicity of fire effluent Estimation of toxic potencyCalculation and interpretation of test results AS 60695.8.12006 Fire hazard testingHeat releaseGeneral guidance AS 60695.8.22006 Fire hazard testingHeat releaseSummary and relevance of test methods AS 60695.9.12006 Fire hazard testingSurface spread of flame General guidance AS 60695.9.22006 Fire hazard testingSurface spread of flame Summary and relevance of test methods AS/NZS 60695.10.2:2004 Fire hazard testing- Abnormal heatBall pressure test AS 60695.10.32006 Fire hazard testingAbnormal heatMould stress relief distortion test AS/NZS 60695.11.2:2004 Fire hazard testingTest flames1 kW nominal pre-mixed flameApparatus, confirmatory test arrangement and guidance AS/NZS 60695.11.3:2004 Fire hazard testingTest flames500 W flamesApparatus and confirmational test methods AS/NZS 60695.11.4:2004 Fire hazard testingTest flames50 W flamesApparatus and confirmational test methods AS/NZS 60695.11.5:2005 Fire hazard testingTest flamesNeedleflame test methodApparatus, confirmatory test arrangement and guidance AS/NZS 60695.11.10:2001 Fire hazard testingTest flames50 W horizontal and vertical flame test methods AS/NZS 60695.11.20:2001 Fire hazard testingTest flames500 W flame test methods AS 60695.11.212006 Fire hazard testingTest flames500 W vertical flame test method for tubular polymeric materials AS 60695.11.402006 Fire hazard testingTest flames Confirmatory testsGuidance
INSULATION
Paper and board insulating materials AS 1767.2.82008 Insulating liquidsTest methodsDetermination of water in oil-impregnated paper and pressboard by automatic coulometric Karl Fischer titration (IEC 60814, Ed. 2.0 (1997) MOD) Plastics and rubber insulating materials AS/NZS 2978:1995 Insulating mats for electrical purposes INSULATION Bushings AS/NZS 60137:2008 Insulated bushings for alternating voltages above 1000 V (IEC 60137, Ed. 5.0 (2003) MOD) Electrical insulation in general AS 1824.11995 Insulation co-ordinationDefinitions, principles and rules AS 1824.21985 Insulation coordination (phase-to-earth and phase-to-phase, above 1 kV)Application guide Insulators AS 1154.12004 Insulator and conductor fittings for overhead power linesPerformance, material, general requirements and dimensions AS 1154.31985 Insulator and conductor fittings for overhead power linesPerformance and general requirements for helical fittings AS 1852.4711988 International electrotechnical vocabulary Insulators AS/NZS 2947.1:1999 InsulatorsPorcelain and glass for overhead power linesVoltages greater than 1000 V a.c.Test methods Insulator units AS 2947.31995 InsulatorsPorcelain and glass for overhead power linesVoltages greater than 1000 V a.c.Couplings AS/NZS 2947.4:1999 InsulatorsPorcelain and glass for overhead power linesVoltages greater than 1000 V a.c.Test methods Insulator strings and insulator sets AS 36082005 InsulatorsPorcelain and glass, pin and shackle typeVoltages not exceeding 1000Va.c. AS 36092005 InsulatorsPorcelain stay typeVoltages greater than 1000 V a.c. AS 4398.11996 InsulatorsCeramic or glassStation post for indoor and outdoor useVoltages greater than 1000 V a.c. Characteristics AS 4398.22005 InsulatorsCeramic or glassStation post for indoor or outdoor useVoltages greater than 1000V a.c.Tests (IEC 60168, Ed. 4.2 (2001) MOD) AS 4435.11996 InsulatorsComposite for overhead power lines Voltages greater than 1000 V a.c.Definitions, test methods and acceptance criteria for string insulator units AS/NZS 4435.2:1999 InsulatorsComposite for overhead power linesVoltages greater than 1000 V a.c.Standard strength classes and end fittings for string insulator units AS 4435.42005 InsulatorsComposite for overhead power lines Voltages greater than 1000V a.c.Definitions, test methods, acceptance criteria for post insulator units AS 44361996 Guide for the selection of insulators in respect of polluted conditions AS 48992007 Pin insulatorsPorcelain and glass for overhead power linesVoltages greater than 1000 V a.c. AS 603052007 Insulators for overhead lines with a nominal voltage above 1000 VCeramic or glass insulator units for a.c. systemsCharacteristics of insulator units of the cap and pin type AS IEC 604332007 Insulators for overhead lines with a nominal voltage above 1000 VCeramic insulators for a.c. systems Characteristics of insulator units of the long rod type AS IEC 604372005 Radio interference test on high-voltage insulators AS IEC 607202007 Characteristics of line post insulators (IEC 60720, Ed. 1.0 (1981) MOD) AS IEC 620732005 Guidance on the measurement of wettability of insulator surfaces AS IEC 621552005 InsulatorsCeramic or glassHollow pressurized and unpressurizedVoltages greater than 1000V a.c. AS 622172007 Polymeric insulators for indoor and outdoor use with a nominal voltage > 1000 VGeneral definitions, test methods and acceptance criteria AS 622312007 Composite station post insulators for substations with a.c. voltages greater than 1000 V up to 245 kVDefinitions, test methods and acceptance criteria
355
INSURANCE
SUBJECT INDEX
INTERNAL COMBUSTION ENGINES AS/NZS CISPR 12:2006 Vehicles, boats, and internal combustion engine driven devicesRadio disturbance characteristicsLimits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices AS 10192000 Internal combustion enginesSpark emission control devices AS/NZS 1359.5:2000 Rotating electrical machinesGeneral requirements Three-phase cage induction motorsHigh efficiency and minimum energy performance standards requirements AS 22371979 Plastics fuel and emission control tube AS/NZS 2557:1999 Limits and methods of measurement of radio interference characteristics of vehicles, motor boats and spark-ignited enginedriven devices AS/NZS 3584 Set:2007 Diesel engine systems for underground coal mines Set AS/NZS 3584.1:2008 Diesel engine systems for underground coal mines Fire protectedHeavy duty AS/NZS 3584.3:2005 Diesel engine systems for underground coal mines Maintenance AS 4591.11999 Internal combustion enginesVocabulary of components and systemsStructure and external covers AS 4591.21999 Internal combustion enginesVocabulary of components and systemsMain running gear AS 4591.31999 Internal combustion enginesVocabulary of components and systemsValves, camshaft drive and actuating mechanisms AS 4591.41999 Internal combustion enginesVocabulary of components and systemsPressure charging and air/exhaust gas ducting systems AS 4591.51999 Internal combustion enginesVocabulary of components and systemsCooling systems AS 4591.61999 Internal combustion enginesVocabulary of components and systemsLubricating systems AS 4591.71999 Internal combustion enginesVocabulary of components and systemsGoverning systems AS 4591.81999 Internal combustion enginesVocabulary of components and systemsStarting systems AS 4591.91999 Internal combustion enginesVocabulary of components and systemsControl and monitoring systems AS 4594.01999 Internal combustion enginesPerformanceApplication AS 4594.11999 Internal combustion enginesPerformanceStandard reference conditions, declarations of power, fuel and lubricating oil consumption and test methods AS 4594.31999 Internal combustion enginesPerformanceEngines for land, rail-traction and marine useTest measurements AS 4594.41999 Internal combustion enginesPerformanceEngines for land, rail-traction and marine useSpeed governing AS 4594.51999 Internal combustion enginesPerformanceEngines for land, rail-traction and marine useTorsional vibrations AS 4594.61999 Internal combustion enginesPerformanceEngines for land, rail-traction and marine useOverspeed protection AS 4594.71999 Internal combustion enginesPerformanceEngines for land, rail-traction and marine useCodes for engine power AS 4594.81999 Internal combustion enginesPerformanceEngines for road vehicle useTest code, net power AS 4594.91999 Internal combustion enginesPerformanceEngines for road vehicle useTest code, gross power AS 4594.101999 Internal combustion enginesPerformanceEngines for agricultural tractor and marine useTest code, net power AS 4594.111999 Internal combustion enginesEngines for motorcycle useTest code, net power INTERNAL COMBUSTION ENGINES FOR ROAD VEHICLES Control systems see Electrical and electronic equipment. Control systems Cooling systems. Lubricating systems AS 21082004 Engine coolants Type A and Type B for engine cooling systems Electrical and electronic equipment. Control systems AS 35471997 Breath alcohol testing devices for personal use AS 4430.22004 Evaluation of devices, additives and processes which claim to improve vehicle performanceSpark ignition engine system Engine block and internal components AS 44271996 Automotive repairsCode of practice for reconditioning reciprocating compression ignition engines AS D261972 Tube fittings with Dryseal American standard taper pipe and unified threads for automotive and industrial use
Other standards related to insulation AS 37681990 Guide to the effects of temperature on electrical equipment INSURANCE see FINANCES. BANKING. MONETARY SYSTEMS. INSURANCE INTEGRATED SERVICES DIGITAL NETWORK (ISDN) AS/NZS 4099:1994 Information technologyTelecommunications and information exchange between systemsProvision of the OSI connectionmode network service by packet mode terminal equipment connected to an integrated services digital network AS/NZS 4102:1993 Information technologyIntegrated services digital network primary access connector at reference points S and T AS/NZS 4134:1995 Information technologyTelecommunications and information exchange between systemsNumbering and sub-addressing in private integrated services networks AS/NZS 4135:1995 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkCircuit-mode 64 kbit/s bearer servicesService description, functional capabilities and information flows AS/NZS 4136.1:1995 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkReference configuration for PISN exchanges (PINX) AS/NZS 4138:1995 Information technologyTelecommunications and information exchange between systemsSynchronization methods and technical requirements for private integrated services networks ACA TS 0141997 General Requirements for Customer Equipment Connected to an ISDN Primary Rate Interface ACA TS 0311997 Requirements for ISDN Basic Access Interface ACA TS 0381997 Requirements for ISDN Primary Rate Access Interface AS/ACIF S031:2001 Requirements for ISDN Basic Access Interface AS/ACIF S038:2001 Requirements for ISDN Primary Rate Access Interface INTERFACE AND INTERCONNECTION EQUIPMENT AS 1189.211987 Data processingVocabularyInterfaces between process computers systems and technical processes AS 1284.10.22006 Electricity meteringData exchange for meter reading, tariff and load controlDirect local data exchange via hand-held unit (HHU)ANSI Standard interface AS 27481991 Information technologyData communication25-pole DTE/DCE interface connector and contact number assignments AS 2748 Supplement 11995 Information technologyData communication 25-pole DTE/DCE interface connector and contact number assignmentsInterface connector and contact assignments for a DTE/DCE interface for data signalling rates above 20 000 bit/s (Supplement to AS 27481991) AS/NZS 2794:1994 Information technologyTelecommunications and information exchange between systems34-pole DTE/DCE interface connector mateability dimensions and contact number assignments AS 37481990 Information processing systemsSmall Computer System Interface (SCSI) AS/NZS 4161:2000 Information technologyTelecommunications and information exchange between systemsDTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits AS/NZS 4263:2003 Interactive voice response systemsUser-interfaceDual tone multi frequency (DTMF) signalling AS 50612008 Interactive voice response systems user interfaceSpeech recognition AS 84812000 Information technologyTelecommunications and information exchange between systemsDTE to DTE direct connections AS/NZS ISO/IEC 14763.3:2007 Telecommunications installations Implementation and operation of customer premises cablingTesting of optical fibre cabling AS ISO/IEC 18047.32006 Information technologyRadio frequency identification device conformance test methodsTest methods for air interface communications at 13.56 MHz AS ISO/IEC 18047.42006 Information technologyRadio frequency identification device conformance test methodsTest methods for air interface communications at 2.45 GHz AS ISO/IEC 18047.72006 Information technologyRadio frequency identification device conformance test methodsTest methods for active air interface communications at 433 MHz AS/NZS ISO/IEC 24702:2007 Telecommunications installationsGeneric cablingIndustrial premises AS 62056.212006 Electricity meteringData exchange for meter reading, tariff and load controlDirect local data exchange INTERIOR FINISHING AS/NZS 2589:2007 Gypsum liningsApplication and finishing HB 1612005 Guide to Plastering
356
SUBJECT INDEX
AS D291973 Filler, drain and pipe plugs with Dryseal American standard taper pipe and unified threads for automotive and industrial use Fuel systems AS/NZS 1425:2007 LP Gas fuel systems for vehicle engines AS 22371979 Plastics fuel and emission control tube AS/NZS 2739:2003 Natural gas (CNG) fuel systems for vehicle engines AS 27462008 Working areas for gas-fuelled vehicles AS/NZS 3509:2003 LP Gas fuel vessels for automotive use AS 4430.12003 Evaluation of devices, additives and processes which claim to improve vehicle performanceEngines designed for leaded petrol to operate on regular unleaded petrol AS 4430.22004 Evaluation of devices, additives and processes which claim to improve vehicle performanceSpark ignition engine system AS 48382002 Gas cylindersHigh pressure cylinders for the onboard storage of natural gas as a fuel for automotive vehicles AS 49832003 Gas fuel systems for forklifts and industrial engines AG 8051998 Approval requirements for natural gas vehicle (NGV) components (incorporates amendment) AG 8061992 Approval requirements for vehicle refuelling appliances AG 9011996 Code of practice for NGV refuelling stations (incorporates Amendments) Internal combustion engines for road vehicles in general AS/NZS CISPR 12:2006 Vehicles, boats, and internal combustion engine driven devicesRadio disturbance characteristicsLimits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices AS/NZS 2557:1999 Limits and methods of measurement of radio interference characteristics of vehicles, motor boats and sparkignited engine-driven devices AS 41821994 Automotive repairsCode of practice for reconditioning reciprocating spark ignition engines Lubricating systems see Cooling systems. Lubricating systems Other components and systems of internal combustion engines AS 4430.22004 Evaluation of devices, additives and processes which claim to improve vehicle performanceSpark ignition engine system Pressure charging and air/exhaust gas ducting systems AS 37611990 Vehicle exhaust system surface temperatures IRON AND STEEL PRODUCTS Flat steel products and semi-products AS/NZS 1365:1996 Tolerances for flat-rolled steel products AS 13972001 Steel sheet and stripHot-dipped zinc-coated or aluminium/zinc-coated AS 13971993 Steel sheet and stripHot-dipped zinc-coated or aluminium/zinc-coated AS 14451986 Hot-dipped zinc-coated or aluminium/zinc-coated steel sheet76 mm pitch corrugated AS 15482008 Fine grained, weldable steel plates for pressure equipment AS/NZS 1594:2002 Hot-rolled steel flat products AS/NZS 1595:1998 Cold-rolled, unalloyed, steel sheet and strip AS 25511982 Steel sheet and stripCold-rolled, electrolytic zinccoated AS 25521982 Steel sheet and stripTerne (lead-tin alloy) coated AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applicationsPerformance requirements AS 35972008 Structural and pressure vessel steelQuenched and tempered plate AS 35971993 Structural and pressure vessel steelQuenched and tempered plate AS/NZS 3678:1996 Structural steelHot-rolled plates, floorplates and slabs AS 38571999 Heat exchangersTubeplatesMethods of design Iron and steel castings AS 18302007 Grey cast iron AS 18312007 Ductile cast iron AS 18322007 Malleable cast iron AS 18332002 Austenitic cast iron AS 1988.12006 Welding of ferrous castingsSteel castings AS 20272007 Abrasive-resistant cast irons
AS 20742003 Cast steels AS 3507.12003 Non-destructive testingGuide to radiography for ferrous castings AS 3507.22006 Non-destructive testingRadiographic determination of quality of ferrous castings AS 4738.12007 Metal castingsFerrous sand moulded AS 50522007 Compacted (vermicular) graphite cast irons Classification AS 50542007 Ausferritic spheroidal graphite cast irons Classification Iron and steel forgings AS 14482007 Carbon steel and carbon-manganese steels Forgings (ruling section 300 mm maximum) Iron and steel products in general AS 23382004 Preferred dimensions of wrought metal products AS/NZS 4496:1997 Recommended practice for the colour coding of steel products AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles Other iron and steel products AS 15171991 Tinplate and blackplate AS/NZS 4672.1:2007 Steel prestressing materialsGeneral requirements AS/NZS 4672.2:2007 Steel prestressing materialsTesting requirements Spring steels AS 14472007 Hot-rolled spring steels AS 14722003 Carbon steel spring wire for mechanical springs AS 22662002 Carbon steel spring wire for bedding and seating Stainless steels AS 14442007 Wrought alloy steelsStandard, hardenability (H) series and hardened and tempered to designated mechanical properties Steel bars and rods AS 14422007 Carbon steels and carbon-manganese steelsHot rolled bars and semi-finished products AS 14432004 Carbon and carbon-manganese steelCold-finished bars AS/NZS 3679.1:1996 Structural steelHot-rolled bars and sections AS/NZS 3679.2:1996 Structural steelWelded I sections Steel pipes and tubes for specific use AS 10741989 Steel tubes and tubulars for ordinary service AS 11631991 Structural steel hollow sections AS 13962000 Steel water bore casing AS 14502007 Steel tubes for mechanical purposes AS 17691975 Welded stainless steel tubes for plumbing applications AS 18552008 Methods for the determination of transverse tensile properties of round steel pipe AS 25562000 Electric resistance welded steel air heater tubes AS 44131996 Steel tubesPressure applicationFlash butt welding AS 47282005 Electric resistance welded steel pipe for pressure purposes AS 5200.0532008 Plumbing and drainage productsStainless steel pipes and tubes for pressure applications ATS 5200.4712005 Technical specification for plumbing and drainage productsStainless steel tubes and mechanical compression fittings for pressure applicationsAlternative systems Steel profiles AS 47502003 Electrogalvanized (zinc) coatings on ferrous hollow and open sections AS/NZS 4791:2006 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process AS/NZS 4792:2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process Steel wire, wire ropes and link chains AS 13942001 Round steel wire for ropes AS 23212006 Short-link chain for lifting purposes AS 27592004 Steel wire ropeUse, operation and maintenance AS 28412005 Galvanized steel wire strand AS 35691989 Steel wire ropes AS 3775.12004 Chain slingsGrade TProduct specification
357
SUBJECT INDEX
AS 43221995 Quality and performance of commercial electrical appliancesHot food storage and display equipment AS 45512008 Domestic gas cooking appliances AS 45632004 Commercial catering gas equipment AS/NZS 60335.2.6:2008 Household and similar electrical appliancesSafetyParticular requirements for stationary cooking ranges, hobs, ovens and similar appliances (IEC 60335-2-6 Ed 5.2, MOD) AS/NZS 60335.2.6:2002 Household and similar electrical appliancesSafetyParticular requirementsParticular requirements for stationary cooking ranges, hobs, ovens and similar appliances AS/NZS 60335.2.9:2002 Household and similar electrical appliancesSafetyParticular requirementsParticular requirements for grills, toasters and similar portable cooking appliances AS/NZS 60335.2.12:2004 Household and similar electrical appliancesSafety- Particular requirements for warming plates and similar appliances AS/NZS 60335.2.25:2002 Household and similar electrical appliancesSafetyParticular requirements for microwave ovens, including combination microwave ovens (IEC 60335-2-25 Ed 5.2, IDT) AS/NZS 60335.2.31:2004 Household and similar electrical appliancesSafety- Particular requirements for range hoods AS/NZS 60335.2.78:2005 Household and similar electrical appliancesSafety- Particular requirements for outdoor barbeques (IEC 60335-2-78 Ed 2.0, IDT) AS/NZS 60335.2.90:2006 Household and Similar Electrical AppliancesSafetyParticular requirements for commercial microwave ovens HB 295.3.152008 Product Safety FrameworkMelting and dissolving of materialsMicrowave oven resistance HB 295.3.152007 Product Safety FrameworkMelting and dissolving of materialsMicrowave oven resistance Cookware, cutlery and flatware AS 13251997 Measuring cups and spoons and litre measures for domestic purposes AS 14081997 Sizing scheme for cooking utensils AS/NZS 4371:1996 Ceramic tableware Dishwashers AS/NZS 2007.1:2005 Performance of household electrical appliancesDishwashersMethods for measuring performance, energy and water consumption AS/NZS 2007.1 Supplement 1:2001 Performance of household electrical appliancesDishwashersEnergy consumption and performanceTest materialSpinach 800 gm tin AS/NZS 2007.2:2005 Performance of household electrical appliancesDishwashersEnergy efficiency labelling requirements AS/NZS 3350.2.5:1995 Safety of household and similar electrical appliancesParticular requirementsDishwashers AS/NZS 60335.2.5:2002 Household and similar electrical appliancesSafetyParticular requirementsParticular requirements for dishwashers HB 295.3.142008 Product Safety FrameworkMelting and dissolving of materialsDishwasher safety HB 295.3.142007 Product Safety FrameworkMelting and dissolving of materialsDishwasher safety Domestic refrigerating appliances AS 26051983 Freezer test packages AS/NZS 3350.2.24:2001 Safety of household and similar electrical appliances- Particular requirements for refrigerating appliances and ice-cream appliances and ice-makers (IEC 60335-224:2000, MOD) AS 4211.31996 Gas recovery or combined recovery and recycling equipmentFluorocarbon refrigerants from commercial/domestic refrigeration and airconditioning systems AS/NZS 4474.1:2007 Performance of household electrical appliancesRefrigerating appliancesEnergy consumption and performance AS/NZS 4474.1:1997 Performance of household electrical appliancesRefrigerating appliancesEnergy consumption and performance AS/NZS 4474.2:2001 Performance of household electrical appliancesRefrigerating appliancesEnergy labelling and minimum energy standard requirements AS/NZS 4776.2:2008 Liquid-chilling packages using the vapour compression cycleMinimum energy performance standard (MEPS) and compliance requirements
AS/NZS 3863:2002 Galvanized mild steel wire for armouring cables AS/NZS 4344:2001 Motor vehiclesCargo restraint systems Transport chain and components AS/NZS 4812:2003 Non-destructive examination and discard criteria for wire ropes in mine winding systems Steels for pressure purposes AS 15482008 Fine grained, weldable steel plates for pressure equipment AS 35972008 Structural and pressure vessel steelQuenched and tempered plate AS 35971993 Structural and pressure vessel steelQuenched and tempered plate AS 44131996 Steel tubesPressure applicationFlash butt welding AS 47282005 Electric resistance welded steel pipe for pressure purposes MP 882000 Evolution of Australian Standard for pressure vessel steel plate Steels for reinforcement of concrete AS/NZS 4671:2001 Steel reinforcing materials IT TERMINAL AND OTHER PERIPHERAL EQUIPMENT AS 1189.121991 Data processingVocabularyPeripheral equipment AS 3590.11990 Screen-based workstationsVisual display units AS 3590.31990 Screen-based workstationsInput devices AS/NZS 3621:2000 Information technologyData communicationsX.25 packet layer protocol for data terminal equipment AS/NZS 4395.1:1996 Information technologyKeyboard layouts for text and office systemsGeneral principles governing keyboard layouts AS/NZS 4395.2:1996 Information technologyKeyboard layouts for text and office systemsAlphanumeric section AS/NZS 4395.3:1996 Information technologyKeyboard layouts for text and office systemsComplementary layouts of the alphanumeric zone of the alphanumeric section AS/NZS 4395.4:1996 Information technologyKeyboard layouts for text and office systemsNumeric section AS/NZS 4395.5:1996 Information technologyKeyboard layouts for text and office systemsEditing section AS/NZS 4395.6:1996 Information technologyKeyboard layouts for text and office systemsFunction section AS/NZS 4395.7:1996 Information technologyKeyboard layouts for text and office systemsSymbols used to represent functions AS/NZS 4395.8:1996 Information technologyKeyboard layouts for text and office systemsAllocation of letters to the keys of a numeric keypad JARS see BOTTLES. POTS. JARS JEWELLERY AS 21402008 JewelleryFineness of precious metal alloys AS 23352008 Requirements for rolled gold and plated jewellery KITCHEN EQUIPMENT Cooking ranges, working tables, ovens and similar appliances AS/NZS 2895.1:2007 Performance of household electrical appliancesMicrowave ovensMethods for measuring the performance of microwave ovens for household and similar purposes (IEC 60705, Ed. 3.2 (2006) MOD) AS/NZS 2895.3:2007 Performance of household electrical appliancesMicrowave ovensConstruction, quality and cooking tests AS/NZS 3350.2.6:2006 Household and similar electrical appliancesSafetyParticular requirements for stationary cooking ranges, hobs, ovens and similar appliances(IEC 60335-26:1997, MOD) AS/NZS 3350.2.9:1999 Safety of household and similar electrical appliancesParticular requirementsGrills, toasters and similar portable cooking appliances AS/NZS 3350.2.12:1997 Safety of household and similar electrical appliancesParticular requirementsWarming plates and similar appliances AS/NZS 3350.2.25:2001 Safety of household and similar electrical appliances- Particular requirements for microwave ovens (IEC 60335-2-25:1996, MOD) AS/NZS 3350.2.31:2001 Safety of household and similar electrical appliances- Particular requirements for range hoods (IEC 60335-2-31:1995, MOD) AS/NZS 3350.2.78:1996 Safety of household and similar electrical appliancesParticular requirementsOutdoor barbecues AS/NZS 4052:1992 Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz
358
SUBJECT INDEX
ATS 5200.1052005 Technical Specification for plumbing and drainage productsAppliancesBeverage dispensers and icemakers AS/NZS 60335.2.24:2003 Household and similar electrical appliancesSafety- Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers REFRIGERATION AND AIRCONDITIONING SET 2007 Refrigeration and airconditioning Set HB 40 Set2005 Australian Refrigeration and Air-conditioning Code of Good Practice Set HB 40.12001 The Australian Refrigeration and Air-conditioning Code of Good PracticeReduction of emissions of fluorocarbon refrigerants in commercial and industrial refrigeration and airconditioning applications HB 40.22001 The Australian Refrigeration and Air-conditioning Code of Good PracticeReduction of emissions of fluorocarbons in residential air-conditioning applications HB 40.32001 The Australian Refrigeration and Air-conditioning Code of Good PracticeReduction of emissions of fluorocarbons in domestic refrigeration applications Kitchen equipment in general HB 1111998 The Domestic Kitchen Handbook Kitchen furniture AS/NZS 4386.1:1996 Domestic kitchen assembliesKitchen units AS/NZS 4386.2:1996 Domestic kitchen assembliesInstallation AS/NZS 4387.0:1996 Domestic kitchen assembliesMethods of testIntroduction, list of methods and general requirements AS/NZS 4387.1:1996 Domestic kitchen assembliesMethods of testDetermination of strength of carcass and underframe AS/NZS 4387.2:1996 Domestic kitchen assembliesMethods of testDetermination of shelf deflection AS/NZS 4387.3:1996 Domestic kitchen assembliesMethods of testDetermination of strength of shelf supports AS/NZS 4387.4:1996 Domestic kitchen assembliesMethods of testDetermination of the strength of worktops and bottom surfaces AS/NZS 4387.5:1996 Domestic kitchen assembliesMethods of testDetermination of strength of hinged doors AS/NZS 4387.6:1996 Domestic kitchen assembliesMethods of testDetermination of slam open of hinged doors AS/NZS 4387.7:1996 Domestic kitchen assembliesMethods of testDetermination of slam shut of hinged doors AS/NZS 4387.8:1996 Domestic kitchen assembliesMethods of testDetermination of wear and fatigue of hinged doors AS/NZS 4387.9:1996 Domestic kitchen assembliesMethods of testDetermination of resistance to downward static load on drawers and other runner-supported items AS/NZS 4387.10:1996 Domestic kitchen assembliesMethods of testDetermination of slam open of drawers AS/NZS 4387.11:1996 Domestic kitchen assembliesMethods of testDetermination of slam shut of drawers AS/NZS 4387.12:1996 Domestic kitchen assembliesMethods of testDetermination of retention of the bottom surface of drawers AS/NZS 4387.13:1996 Domestic kitchen assembliesMethods of testDetermination of wear and fatigue of drawers, sliding shelves and runners AS/NZS 4387.14:1996 Domestic kitchen assembliesMethods of testDetermination of strength of handles AS/NZS 4387.15:1996 Domestic kitchen assembliesMethods of testDetermination of the strength of support frames for wall attachment devices AS/NZS 4387.16:1996 Domestic kitchen assembliesMethods of testDetermination of calibration of drawer slamming apparatus Small kitchen appliances AS/NZS 3350.2.9:1999 Safety of household and similar electrical appliancesParticular requirementsGrills, toasters and similar portable cooking appliances AS/NZS 3350.2.13:2001 Safety of household and similar electrical appliances- Particular requirements for deep fat fryers, frying pans and similar appliances (IEC 60335-2-13:1993, MOD) AS/NZS 3350.2.14:1995 Safety of household and similar electrical appliancesParticular requirementsKitchen machines AS/NZS 3350.2.15:2002 Safety of household and similar electrical appliancesParticular requirements for appliances for heating liquids (IEC 60335-2-15:1995, MOD) AS/NZS 3350.2.16:1996 Safety of household and similar electrical appliancesParticular requirementsFood waste disposers
LABORATORY MEDICINE
AS/NZS 3350.2.73:1996 Safety of household and similar electrical appliancesParticular requirementsFixed immersion heaters AS/NZS 3350.2.74:2001 Safety of household and similar electrical appliances- Particular requirements for portable immersion heaters (IEC 60335-2-74:1994, MOD) AS/NZS 3497:1998 Drinking water treatment unitsPlumbing requirements AS/NZS 4348:1995 Water supplyDomestic type water treatment appliancesPerformance requirements ATS 5200.0282004 Technical Specification for plumbing and drainage productsCommercial food waste disposal unit ATS 5200.1032004 Technical Specification for plumbing and drainage productsWater treatment systems (other than those specified in AS/NZS3497) AS/NZS 60335.2.9:2002 Household and similar electrical appliancesSafetyParticular requirementsParticular requirements for grills, toasters and similar portable cooking appliances AS/NZS 60335.2.13:2004 Household and similar electrical appliancesSafety- Particular requirements for deep fat fryers, frying pans and similar appliances AS/NZS 60335.2.14:2007 Household and similar electrical appliancesSafetyParticular requirements for kitchen machines (IEC 60335-2-14: Ed 5.0, MOD) AS/NZS 60335.2.14:2004 Household and similar electrical appliancesSafety- Particular requirements for kitchen machines AS/NZS 60335.2.15:2002 Household and similar electrical appliancesSafetyParticular requirementsParticular requirements for appliances for heating liquids AS/NZS 60335.2.16:2006 Household and similar electrical appliancesSafetyParticular requirements for food waste disposers(IEC 60335-2-16 Ed 5, IDT) AS/NZS 60335.2.74:2005 Household and similar electrical apppliancesSafety- Particular requirements for portable immersion heaters (IEC 60335-2-74 Ed 2.0, IDT) LABORATORY MEDICINE AS ISO 10993.122004 Biological evaluation of medical devicesSample preparation and reference materials Analysis of blood and urine AS 24111993 Venous bloodDetermination of lead contentFlame atomic absorption spectrometric method AS 26361994 Sampling of venous and capillary blood for the determination of lead or cadmium concentration AS 35031987 Whole bloodDetermination of cadmiumFurnace atomic absorption spectrometric method AS 40901993 Whole bloodDetermination of lead content Graphite furnace atomic absorption spectrometric method AS 4195.11994 Analysis of serum and plasma for trace elements Determination of aluminium contentGraphite furnace atomic absorption spectrometric method AS 4205.21994 Analysis of urine for trace elements Determination of copper, cadmium and leadFlame atomic absorption spectrometric method AS/NZS 4308:2008 Procedures for specimen collection and the detection and quantitation of drugs of abuse in urine AS 47602006 Procedures for specimen collection and the detection and quantitation of drugs in oral fluid AS 49852002 Collection and stabilization of urine samples for quantitation of trace and toxic elements Biological evaluation of medical devices AS ISO 10993.12002 Biological evaluation of medical devices Evaluation and testing AS ISO 10993.32002 Biological evaluation of medical devices Tests for genotoxicity, carcinogenicity and reproductive toxicity AS ISO 10993.42003 Biological evaluation of medical devices Selection of tests for interactions with blood AS ISO 10993.52002 Biological evaluation of medical devices Tests for in vitro cytotoxicity AS ISO 10993.62002 Biological evaluation of medical devices Tests for local effects after implantation AS ISO 10993.72003 Biological evaluation of medical devices Ethylene oxide sterilization residuals AS ISO 10993.82003 Biological evaluation of medical devices Selection and qualification of reference materials for biological tests AS ISO 10993.92002 Biological evaluation of medical devices Framework for identification and quantification of potential degradation products
359
LADDERS
SUBJECT INDEX
AS/NZS 60969:2001 Self ballasted lamps for general lighting servicesPerformance requirements AS/NZS 61050:1998 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers)General and safety requirements Incandescent lamps AS 23251993 Tungsten filament lamps for general service Performance requirements AS/NZS 4934.1(Int):2008 Incandescent lamps for general lighting serviceTest methodsEnergy performance AS/NZS 4934.2(Int):2008 Incandescent lamps for general lighting servicesMinimum Energy Performance Standards (MEPS) requirements AS/NZS 60432.1:2007 Incandescent lampsSafety specifications Tungsten filament lamps for domestic and similar general lighting purposes AS/NZS 60432.2:2007 Incandescent lampsSafety specifications Tungsten-halogen lamps for domestic and similar general lighting purposes AS/NZS 60432.3:2007 Incandescent lampsSafety specifications Tungsten-halogen lamps (non-vehicle) AS/NZS 61046:2001 Auxiliaries for lampsD.C. or A.C. supplied electronic step-down convertors for filament lampsGeneral and safety requirements AS/NZS 61047:2001 Auxiliaries for lampsD.C. or a.c. supplied electronic step-down convertors for filament lamps Performance requirements Lamp caps and holders AS/NZS 3117:2007 Approval and test specificationBayonet lampholders AS 31191994 Approval and test specificationNormal bayonet lampholder adaptors AS/NZS 3140:2007 Approval and test specificationEdison-type screw lampholders AS/NZS 60238:2007 Edison screw lampholders (IEC 60238, Ed.8.0 (2004) MOD) AS/NZS 61184:2007 Bayonet lampholders (IEC 61184, Ed. 2.0 (1997) MOD) Lamps in general AS/NZS 3113:2005 Approval and test specificationCeiling roses AS/NZS 3128:1998 Approval and test specificationPortable lamp standards and brackets AS/NZS 4293:1995 International lamp coding system (ILCOS) AS/NZS 61231:2001 International lamp coding system (ILCOS) AS/NZS 61347.1:2002 Lamp controlgearGeneral and safety requirements (IEC 61347-1:2000, MOD) AS/NZS 61347.2.1:2002 Lamp controlgear- Particular requirements for starting devices (other than glow starters) AS/NZS 61347.2.2:2007 Lamp controlgearParticular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2, Ed. 1.2 (2006) MOD) AS/NZS 61347.2.3:2004 Lamp controlgear- Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps (IEC61347-2-3:2000, MOD) AS/NZS 61347.2.4:2002 Lamp controlgear- Particular requirements for d.c. supplied electronic ballasts for general lighting AS/NZS 61347.2.5:2002 Lamp controlgear- Particular requirements for d.c. supplied electronic ballasts for public transport AS/NZS 61347.2.6:2002 Lamp controlgear- Particular requirements for d.c supplied electronic ballasts for aircraft lighting AS/NZS 61347.2.8:2003 Lamp controlgearParticular requirements for ballasts for fluorescent lamps (IEC 61347-2-8:2000, MOD) AS/NZS 61347.2.9:2004 Lamp controlgear- Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) (IEC61347-2-9:2000 MOD) AS/NZS 61347.2.10:2004 Lamp controlgear- Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) (IEC61347-2-10:2000 MOD) AS/NZS 61347.2.11:2003 Lamp controlgearParticular requirements for miscellaneous electronic circuits used with luminaires (IEC 61347-2-11:2001, MOD) Luminaires AS/NZS 1158.6:2004 Lighting for roads and public spaces Luminaires AS 2293 Set2005 Emergency escape lighting and exit signs Set
AS ISO 10993.102003 Biological evaluation of medical devices Tests for irritation and delayed type hypersensitivity AS ISO 10993.112002 Biological evaluation of medical devices Tests for systemic toxicity AS ISO 10993.122004 Biological evaluation of medical devices Sample preparation and reference materials AS ISO 10993.132002 Biological evaluation of medical devices Identification and quantification of degradation products from polymeric medical devices AS ISO 10993.142003 Biological evaluation of medical devices Identification and quantification of degradation products from ceramics AS ISO 10993.152003 Biological evaluation of medical devices Identification and quantification of degradation products from metals and alloys AS ISO 10993.162002 Biological evaluation of medical devices Toxicokinetic study design for degradation products and leachables AS ISO 10993.172004 Biological evaluation of medical devices Establishment of allowable limits for leachable substances AS ISO 14155.12004 Clinical investigations of medical devices for human subjectsGeneral requirements Other standards related to laboratory medicine AS 46332004 Medical laboratoriesParticular requirements for quality and competence LADDERS AS 16571992 Fixed platforms, walkways, stairways and laddersDesign, construction and installation AS/NZS 1892.1:1996 Portable laddersMetal AS 1892.21992 Portable laddersTimber AS/NZS 1892.3:1996 Portable laddersReinforced plastic AS/NZS 1892.5:2000 Portable laddersSelection, safe use and care AS 29331987 ShipbuildingPilot ladders LAMPS AND RELATED EQUIPMENT AS/NZS 4847.1(Int):2008 Self-ballasted lamps for general lighting services Test methodsEnergy performance Discharge lamps see Fluorescent lamps. Discharge lamps Fluorescent lamps. Discharge lamps AS 31381993 Approval and test specificationStarters for fluorescent lamps AS/NZS 3166:1993 Approval and test specificationCables for high voltage luminous discharge tube installations AS/NZS 3832:1998 Electrical installationsCold-cathode illumination systems AS 41111993 Starters for fluorescent lampsPerformance requirements AS/NZS 4782.1:2004 Double-capped fluorescent lamps Performance specificationsGeneral (IEC 60081:2000, MOD) AS/NZS 4782.2:2004 Double-capped fluorescent lamps Performance specificationsMinimum Energy Performance Standard (MEPS) AS/NZS 4782.3(Int):2006 Double-capped fluorescent lamps Performance specificationsProcedure for quantitative analysis of mercury present in fluorescent lamps AS/NZS 4783.1:2001 Performance of electrical lighting equipment Ballasts for fluorescent lampsMethod of measurement to determine energy consumption and performance of ballasts lamp circuits AS/NZS 4783.2:2002 Performance of electrical lighting equipment Ballasts for fluorescent lampsEnergy labelling and minimum energy performance standards requirements AS/NZS 4847.2(Int):2008 Self-ballasted lamps for general lighting servicesMinimum Energy Performance Standards (MEPS) requirements AS/NZS 60901:2003 Single-capped fluorescent lamps Performance specifications AS/NZS 60921:2002 Ballasts for tubular fluorescent lamps Performance requirements (IEC 60921:1988, MOD) AS/NZS 60922:1998 Auxiliaries for lampsBallasts for discharge lamps (excluding tubular fluorescent lamps)General and safety requirements AS/NZS 60923:1998 Auxiliaries for lampsBallasts for discharge lamps (excluding tubular fluorescent lamps)Performance requirements AS/NZS 60968:2001 Self ballasted lamps for general lighting servicesSafety requirements (IEC 60968:1988, MOD)
360
SUBJECT INDEX
AS 2293.12005 Emergency escape lighting and exit signs for buildingsSystem design, installation and operation AS 2293.32005 Emergency escape lighting and exit signs for buildingsEmergency escape luminaires and exit signs AS/NZS 4879.1:2008 Performance of transformers and electronic step-down convertors for ELV lampsTest methodEnergy performance AS/NZS 60598 (Set):2003 Luminaires AS/NZS 60598.1:2003 LuminairesGeneral requirements and tests AS/NZS 60598.2.1:1998 LuminairesParticular requirementsFixed general purpose luminaires AS/NZS 60598.2.2:2001 LuminairesParticular requirements Recessed luminaires (IEC 60598-2-2:1996, MOD) AS/NZS 60598.2.4:2005 LuminairesParticular requirements Portable general purpose luminaires (IEC60598-2-4, Ed. 2.0 (1997) MOD) AS/NZS 60598.2.5:2002 LuminairesParticular requirements Floodlights (IEC 60598.2.5:1998, MOD) AS/NZS 60598.2.6:1998 LuminairesParticular requirements Luminaires with built-in transformers or convertors for filament lamps AS/NZS 60598.2.7:2005 LuminairesParticular requirements Portable luminaires for garden use (IEC60598-2-7, Ed. 1.0 (1982) MOD) AS/NZS 60598.2.8:2002 LuminairesParticular requirements Handlamps AS/NZS 60598.2.8:1998 LuminairesParticular requirements Handlamps AS/NZS 60598.2.9:2006 LuminairesParticular requirements Photo and film luminaires (non-professional)(IEC60598-2-9, Ed. 2.0 (1987) MOD) AS/NZS 60598.2.10:1998 LuminairesParticular requirements Portable child-appealing luminaires AS/NZS 60598.2.17:2006 LuminairesParticular requirements Luminaires for stage lighting, television, film and photographic studios (outdoor and indoor)(IEC60598.2.17, Ed. 1.0 (1984) MOD) AS/NZS 60598.2.18:1998 LuminairesParticular requirements Luminaires for swimming pools and similar applications AS/NZS 60598.2.19:2001 LuminairesParticular requirementsAir handling luminaires (Safety requirements) (IEC 60598.2.19:1981, MOD) AS/NZS 60598.2.20:2002 LuminairesParticular requirements Lighting chains (IEC 60598-2-20:1996, MOD) AS/NZS 60598.2.22:2005 LuminairesParticular requirements Luminaires for emergency lighting (IEC60598-2-22, Ed. 3.1(2002) MOD) AS/NZS 60598.2.23:2002 LuminairesParticular requirements Extra low voltage lighting systems for filament lamps (IEC 60598.2.23:1996, MOD) AS/NZS 60598.2.25:2001 LuminairesParticular requirements Luminaires for use in clinical areas of hospitals and health care buildings (IEC 60598.2.25:1994, MOD) Other standards related to lamps AS/NZS 60155:2000 Glow-starters for fluorescent lamps AS/NZS 60921:2002 Ballasts for tubular fluorescent lamps Performance requirements (IEC 60921:1988, MOD) AS/NZS 60925:2005 D.C. supplied electronic ballasts for tubular fluorescent lampsPerformance requirements (IEC60925, Ed. 1.2 (2001) MOD) AS/NZS 60927:2005 Auxiliaries for lampsStarting devices (other than glow starters)Performance requirements (IEC60927, Ed.2.2 (2004) MOD) AS/NZS 60928:2000 Auxiliaries for lampsA.C. supplied electronic ballasts for tubular fluorescent lampsGeneral and safety requirements AS/NZS 60929:2005 A.C. supplied electronic ballasts for tubular fluorescent lampsPerformance requirements AS/NZS 61347.2.2:2007 Lamp controlgearParticular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2, Ed. 1.2 (2006) MOD) LANGUAGES USED IN INFORMATION TECHNOLOGY AS 1189.151987 Data processingVocabularyProgramming languages AS/NZS 1486:1993 Information technologyProgramming languages Fortran 90 AS 14861983 Programming language FORTRAN AS 25801991 Programming languagesPascal AS 39551991 Programming languagesC
AS 39811991 Information technologyProgramming languagesExtended Pascal AS/NZS 4101:1993 Information technologyInformation resource dictionary system framework AS/NZS 4148:1994 Information technologyHypermedia/Time-based structuring language (HyTime) AS/NZS 4227:1994 Information technologyInformation resource dictionary system services interface AS/NZS 4379.1:1996 Information technologyOpen Systems InterconnectionRemote database accessGeneric model, service and protocol AS/NZS 4379.2:1996 Information technologyOpen Systems InterconnectionRemote database accessSQL specialization AS ISO/IEC 9075.12005 Information technologyDatabase languages SQLFramework (SQL/Framework) AS ISO/IEC 9075.22005 Information technologyDatabase languages SQLFoundation (SQL/Foundation) AS ISO/IEC 9075.32005 Information technologyDatabase languages SQLCall-Level Interface (SQL/CLI) AS ISO/IEC 9075.42005 Information technologyDatabase languages SQLPersistent Stored Modules (SQL/PSM) AS ISO/IEC 9075.52005 Information technologyDatabase languages SQLHost Language Bindings (SQL/Bindings) AS ISO/IEC 9075.92005 Information technologyDatabase languages SQLManagement of External Data (SQL/MED) AS ISO/IEC 9075.102005 Information technologyDatabase languages SQLObject Language Bindings (SQL/OLB) AS ISO/IEC 9075.112005 Information technologyDatabase languages SQLInformation and Definition Schemas (SQL/Schemata) AS ISO/IEC 9075.132005 Information technologyDatabase languages SQLSQL Routines and Types Using the JavaTM (Programming Language (SQL/JRT) AS ISO/IEC 9075.142005 Information technologyDatabase languages SQLXML-Related Specifications (SQL/XML) AS 101791998 Information technologyProcessing languagesDocument style semantics and specification language AS ISO/IEC 13249.12005 Information technologyDatabase languages SQL multimedia and application packagesFramework AS ISO/IEC 13249.22005 Information technologyDatabase languages SQL multimedia and application packagesFull-Text AS ISO/IEC 13249.32005 Information technologyDatabase languages SQL multimedia and application packagesSpatial AS ISO/IEC 13249.52005 Information technologyDatabase languages SQL multimedia and application packagesStill image AS ISO/IEC 13249.62005 Information technologyDatabase languages SQL multimedia and application packagesData mining AS/NZS ISO/IEC 14750:2003 Information technologyOpen distributed processingInterface definition language AS/NZS 14882:1999 Programming languagesC plus plus AS/NZS ISO/IEC 15437:2003 Information technologyOpen distributed processingEnhancements to LOTOS (E-LOTOS) AS/NZS 60950.1:2003 Information technology equipmentSafetyGeneral requirements LASER EQUIPMENT see OPTOELECTRONICS. LASER EQUIPMENT LAUNDRY APPLIANCES AS/NZS 2040.1:2005 Performance of household electrical appliances Clothes washing machinesMethods for measuring performance, energy and water consumption AS/NZS 2040.1 Supplement 1:1998 Performance of household electrical appliancesClothes washing machinesEnergy consumption and performanceTest materialOther than drum-type detergent (Supplement to AS/NZS 2040.1:1998) AS/NZS 2040.1 Supplement 2:1998 Performance of household electrical appliancesClothes washing machinesEnergy consumption and performanceTest materialDrum-type detergent (Supplement to AS/NZS 2040.1:1998) AS/NZS 2040.2:2005 Performance of household electrical appliances Clothes washing machinesEnergy efficiency labelling requirements AS/NZS 2442.1:1996 Performance of household electrical appliances Rotary clothes dryersEnergy consumption and performance AS/NZS 2442.1 Supplement 3:1996 Performance of household electrical appliancesRotary clothes dryersEnergy consumption and performanceTest materialPillow case (Supplement to AS/NZS 2442.1:1996) AS/NZS 2442.1 Supplement 4:1996 Performance of household electrical appliancesRotary clothes dryersEnergy consumption and performanceTest materialBath towel (Supplement to AS/NZS 2442.1:1996)
361
LAW. ADMINISTRATION
SUBJECT INDEX
AS/NZS 4911:2003 (Reusable PDF) General conditions of contract for the supply of equipment without installation AS 49502006 Form of formal instrument of agreement AS 49502006 (Reusable PDF) Form of formal instrument of agreement LEGAL RISK SET2007 Legal Risk Management Set HB 296:2007 Legal risk management LEATHER TECHNOLOGY Leather and furs AS 1157.61998 Methods of testing materials for resistance to fungal growthResistance of leather and wet 'blue' hides to fungal growth Raw skins, hides and pelts AS 4480.11998 Textiles for health care facilities and institutions Medical sheepskinsProduct specification and testing LIFTING EQUIPMENT Accessories for lifting equipment AS 11382008 Thimbles for wire rope AS 1353.11997 Flat synthetic-webbing slingsProduct specification AS 1353.21997 Flat synthetic-webbing slingsCare and use AS 1380.11998 Fibre-rope slingsProduct specification AS 1380.21998 Fibre-rope slingsCare and use AS 1438.11998 Wire-coil flat slingsProduct specification AS 1438.21998 Wire-coil flat slingsCare and use AS 1666.11995 Wire-rope slingsProduct specification AS 1666.21995 Wire-rope slingsCare and use AS 20761996 Wire-rope grips for non-lifting applications AS 20892008 Sheave blocks for lifting purposes AS 23171998 Collared eyebolts AS 23182006 Swivels for lifting applications AS 23192001 Rigging screws and turnbuckles AS 23212006 Short-link chain for lifting purposes AS 27402001 Wedge-type sockets AS 27412002 Shackles AS 27592004 Steel wire ropeUse, operation and maintenance AS 35852008 End fittings for synthetic flat-webbing and round slings AS 3775.12004 Chain slingsGrade TProduct specification AS 3775.22004 Chain slingsGradeTCare and use AS 37762006 Lifting components for Grade T chain slings AS 37772008 Shank hooks and large eye hooksMaximum 60 t AS 4497.11997 RoundslingsSynthetic fibreProduct specification AS 4497.21997 RoundslingsSynthetic fibreCare and use Cranes AS 1418.12002 Cranes, hoists and winchesGeneral requirements AS 1418.21997 Cranes (including hoists and winches)Serial hoists and winches AS 1418.31997 Cranes, hoists and winchesBridge, gantry and portal cranes (including container cranes) and jib cranes AS 1418.42004 Cranes, hoists and winchesTower cranes AS 1418.52002 Cranes, hoists and winchesMobile cranes AS 1418.62004 Cranes, hoists and winchesGuided storing and retrieving appliances AS 1418.71999 Cranes (including hoists and winches)Builders hoists and associated equipment AS 1418.82008 Cranes, hoists and winchesSpecial purpose appliances AS/NZS 1418.9:1996 Cranes (including hoists and winches) Vehicle hoists AS 1418.10(Int)2004 Cranes, hoists and winchesElevating work platforms AS 1418.112007 Cranes, hoists and winchesVehicle-loading cranes AS 1418.121991 Cranes (including hoists and winches)Crane collector systems AS 1418.131996 Cranes (including hoists and winches)Building maintenance units AS 1418.141996 Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions AS 1418.151994 Cranes (including hoists and winches)Concrete placing equipment
AS/NZS 2442.1 Supplement 6:1998 Performance of household electrical appliancesRotary clothes dryersEnergy consumption and performanceTest materialDouble bed sheet (Supplement to AS/NZS 2442.1:1996) AS/NZS 2442.1 Supplement 7:1998 Performance of household electrical appliancesRotary clothes dryersEnergy consumption and performanceTest materialTable cloth (Supplement to AS/NZS 2442.1:1996) AS/NZS 2442.1 Supplement 8:2000 Performance of household electrical appliancesRotary clothes dryersEnergy consumption and performanceTest materialUndershorts (Supplement to AS/NZS 2442.1:1996) AS/NZS 2442.2:2000 Performance of household electrical appliances Rotary clothes dryersEnergy labelling requirements AS/NZS 3350.2.3:1995 Safety of household and similar electrical appliancesParticular requirementsElectric irons AS/NZS 3350.2.4:1998 Safety of household and similar electrical appliancesParticular requirementsSpin extractors AS/NZS 3350.2.7:2001 Safety of household and similar electrical appliances- Particular requirements for washing machines (IEC 60335-27:2000, MOD) AS/NZS 3350.2.11:2001 Safety of household and similar electrical appliancesParticular requirementsParticular requirements for tumble dryers (IEC 60335-2-11:2000, MOD) AS/NZS 3350.2.43:2001 Safety of household and similar electrical appliances- Particular requirements for clothes dryers and towel rails (IEC 60335-2-43:1995, MOD) AS/NZS 3350.2.44:1999 Safety of household and similar electrical appliancesParticular requirementsIroners AS/NZS 3350.2.85:1998 Safety of household and similar electrical appliancesParticular requirementsFabric steamers AS 45542005 Gas laundry dryers AS 603111999 Electric irons for household or similar useMethods for measuring performance AS/NZS 60335.2.3:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for electric irons AS/NZS 60335.2.4:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for spin extractors AS/NZS 60335.2.7:2002 Household and similar electrical appliances SafetyParticular requirementsParticular requirements for washing machines AS/NZS 60335.2.11:2002 Household and similar electrical appliances Safety- Particular requirements for tumble dryers (IEC 60335-2-11 Ed 6, MOD) AS/NZS 60335.2.43:2005 Household and similar electrical appliances Safety- Particular requirements for clothes dryers and towel rails (IEC 60335-2-43 Ed 3.0, MOD) AS/NZS 60335.2.44:2006 Household and similar electrical appliances SafetyParticular requirements for ironers (IEC 60335-2-44 Ed 3, IDT) AS/NZS 60335.2.85:2005 Household and similar electrical appliances Safety- Particular requirements for fabric steamers (IEC 60335-2-85 Ed 2.0, IDT) HB 295.3.162007 Product Safety FrameworkMelting and dissolving of materialsWashing by hand LAW. ADMINISTRATION AS 2898.12003 Radar speed detectionFunctional requirements and definitions AS 2898.22003 Radar speed detectionOperational procedures AS 2987/A1987 Annexure to the Australian Standard for conditions of contract for supply and erection of equipment AS 2987/B1987 Annexure to the Australian Standard for conditions of contract for supply and erection of equipment AS 2987 to 29881987 General conditions of contract for the supply of equipment with or without installation AS 2987 to 29881987 (Reusable PDF) General conditions of contract for the supply of equipment with or without installation AS 29881987 Form of formal instrument of agreement AS 41201994 Code of tendering AS 4691.12003 Laser-based speed detection devicesDefinitions and device requirements AS 4691.22003 Laser-based speed detection devicesOperational procedures AS 49102002 General conditions of contract for the supply of equipment with installation AS 49102002 (Reusable PDF) General conditions of contract for the supply of equipment with installation AS/NZS 4911:2003 General conditions of contract for the supply of equipment without installation
362
SUBJECT INDEX
AS 1418.161997 Cranes (including hoists and winches)Mast climbing work platforms AS 1418.171996 Cranes (including hoists and winches)Design and construction of workboxes AS 1418.182001 Cranes, hoists and winchesCrane runways and monorails AS 1418.192007 Cranes, hoists and winchesTelescopic handlers AS 25491996 Cranes (including hoists and winches)Glossary of terms AS 2550 Set2008 Cranes, hoists and winchesSafe use Set AS 2550.12002 Cranes, hoists and winchesSafe useGeneral requirements AS 2550.32002 Cranes, hoists and winchesSafe useBridge, gantry, portal (including container cranes), jib and monorail cranes AS 2550.42004 Cranes, hoists and winchesSafe useTower cranes AS 2550.52002 Cranes, hoists and winchesSafe useMobile cranes AS 2550.61995 CranesSafe useGuided storing and retrieving appliances AS 2550.71996 CranesSafe useBuilders' hoists and associated equipment AS/NZS 2550.9:1996 CranesSafe useVehicle hoists AS 2550.102006 Cranes, hoists and winchesSafe useMobile elevating work platforms AS 2550.112004 Cranes, hoists and winchesSafe useVehicleloading cranes AS 2550.131997 Cranes- Safe useBuilding maintenance units AS 2550.151994 CranesSafe useConcrete placing equipment AS 2550.161997 Cranes- Safe useMast climbing work platforms AS 2550.192007 Cranes, hoists and winchesSafe use Telescopic handlers AS 2550.202005 Cranes, hoists and winchesSafe useSelferecting tower cranes AS 49912004 Lifting devices Lifting appliances in general AS 47482001 Acoustic emission testing of fibreglass-insulated booms on elevating work platforms Other lifting equipment AS/NZS 2615:1995 Hydraulic trolley jacks LIGHTING Exterior building lighting AS 17981992 Lighting poles and bracket armsPreferred dimensions AS 2560.2.82007 Sports lightingSpecific applicationsOutdoor bowling greens AS 42821997 Control of the obtrusive effects of outdoor lighting Interior lighting AS/NZS 1680.0:1998 Interior lightingSafe movement AS/NZS 1680.1:2006 Interior and workplace lightingGeneral principles and recommendations AS 1680.11990 Interior lightingGeneral principles and recommendations AS 1680.2.01990 Interior lighting- Recommendations for specific tasks and interiors AS/NZS 1680.2.1:2008 Interior and workplace lightingSpecific applicationsCirculation spaces and other general areas AS 1680.2.11993 Interior lighting- Circulation spaces and other general areas AS/NZS 1680.2.2:2008 Interior and workplace lightingSpecific applicationsOffice and screen-based tasks AS 1680.2.21994 Interior lighting- Office and screen-based tasks AS/NZS 1680.2.3:2008 Interior and workplace lightingSpecific applicationsEducational and training facilities AS 1680.2.31994 Interior lighting- Educational and training facilities AS/NZS 1680.2.4:1997 Interior lighting- Industrial tasks and processes AS/NZS 1680.2.5:1997 Interior lighting- Hospital and medical tasks AS 1680.31991 Interior lightingMeasurement, calculation and presentation of photometric data AS/NZS 1680.4:2001 Interior lightingMaintenance of electric lighting systems
LIGHTING
AS 2293 Set2005 Emergency escape lighting and exit signs Set AS 2293.12005 Emergency escape lighting and exit signs for buildingsSystem design, installation and operation AS/NZS 2293.1:1998 Emergency evacuation lighting for buildings System design, installation and operation AS/NZS 2293.2:1995 Emergency evacuation lighting for buildings Inspection and maintenance AS 2293.32005 Emergency escape lighting and exit signs for buildingsEmergency escape luminaires and exit signs AS/NZS 2293.3:1995 Emergency evacuation lighting for buildings Emergency luminaires and exit signs AS 29461991 Suspended ceilings, recessed luminaires and air diffusersInterface requirements for physical compatibility AS/NZS 60598.2.22:2005 LuminairesParticular requirements Luminaires for emergency lighting (IEC60598-2-22, Ed. 3.1(2002) MOD) Lighting in general AS 1852.8451989 International electrotechnical vocabulary Lighting AS 2560.12002 Sports lightingGeneral principles AS 2560.2.12003 Sports lightingSpecific applicationsLighting for outdoor tennis AS 2560.2.21986 Guide to sports lightingSpecific recommendationsLighting of multipurpose indoor sports centres AS 2560.2.32007 Sports lightingSpecific applicationsLighting for football (all codes) AS 2560.2.41986 Guide to sports lightingSpecific recommendationsLighting for outdoor netball and basketball AS 2560.2.52007 Sports lightingSpecific applicationsSwimming pools AS 2560.2.61994 Guide to sports lighting- Specific recommendationsBaseball and softball AS 2560.2.71994 Guide to sports lighting- Specific recommendationsOutdoor hockey AS 2560.2.82007 Sports lightingSpecific applicationsOutdoor bowling greens AS/NZS 3827.1:1998 Lighting system performanceAccuracies and tolerancesOverview and general recommendations AS/NZS 3827.2:1998 Lighting system performanceAccuracies and tolerancesCompliance requirements HB 49.11993 Sporting Facilities ManualSports lighting LINEAR AND ANGULAR MEASUREMENTS Limits and fits AS 1654.11995 ISO system of limits and fitsBases of tolerances, deviations and fits AS 1654.21995 ISO system of limits and fitsTables of standard tolerance grades and limit deviations for holes and shafts AS 4826.12001 Geometric Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipmentDecision rules for proving conformance or nonconformance with specifications Linear and angular measurements in general HB 86.2:1998 A guide to the selection, care, calibration and checking of measuring instruments in industrySimple length and angle measuring instruments Measuring instruments AS 10011970 Plain setting rings for internal measuring equipment (metric series) AS 10031971 Engineers' straightedges (metric units) AS 1004.11998 Surface plates for metrologyCast iron AS 1004.21998 Surface plates for metrologyGranite AS 10981972 Roller-type screw calliper gauges AS 1290.11995 Linear measuring instruments used in constructionGeneral requirements AS 1290.21995 Linear measuring instruments used in constructionWooden and synthetic material folding rules AS 1290.31995 Linear measuring instruments used in constructionLaths, folding rods and multi-folding rods AS 1290.41995 Linear measuring instruments used in constructionRetractable steel pocket rules AS 1290.51999 Linear measuring instruments used in constructionCoated and etched steel measuring tapes AS 1290.61995 Linear measuring instruments used in constructionSynthetic material measuring tapes AS 1290.71995 Linear measuring instruments used in constructionSurveyor's measuring bands and readers
363
LINEN
SUBJECT INDEX
MATERIALS FOR THE REINFORCEMENT OF COMPOSITES Carbon materials AS 4978.12006 Quantification, monitoring and reporting of greenhouse gases in forest projectsAfforestation and reforestation MATHEMATICS AS 1852.1011978 International electrotechnical vocabularyMathematics MEASUREMENT OF FLUID FLOW Flow in closed conduits AS 2360.01993 Measurement of fluid flow in closed conduits Vocabulary and symbols AS 2360.1.11993 Measurement of fluid flow in closed conduits Pressure differential methodsMeasurement using orifice plates, nozzles or Venturi tubesConduits with diameters from 50 mm to 1200 mm AS 2360.1.21993 Measurement of fluid flow in closed conduits Pressure differential methodsMeasurement using orifice plates or nozzlesConduits with diameters less than 50 mm AS 2360.1.31993 Measurement of fluid flow in closed conduits Pressure differential methodsMeasurement using orifice plates, nozzles or Venturi tubesGuide to the use of methods specified in Parts 1.1 and 1.2 AS 2360.1.41993 Measurement of fluid flow in closed conduits Pressure differential methodsMeasurement using orifice plates, nozzles or Venturi tubesGuide to the effect of departure from the conditions specified in Part 1.1 AS 2360.1.52001 Measurement of fluid flow in closed conduits Pressure differential methodsMeasurement using orifice plates, nozzles or Venturi metersPulsating flow, in particular sinusoidal or square wave intermittent periodic-type fluctuations AS 2360.6.11993 Measurement of fluid flow in closed conduits Volumetric methodsBy mass AS 2360.6.21993 Measurement of fluid flow in closed conduits Volumetric methodsBy volume AS 2360.7.12001 Measurement of fluid flow in closed conduits Assessment of uncertainty in the calibration and use of flow measurement devicesLinear calibration relationships AS 2360.7.21993 Measurement of fluid flow in closed conduits Assessment of uncertainty in the calibration and use of flow measurement devicesNon-linear calibration relationships AS 2360.8.12007 HydrometryMeasurement of free surface flow in closed conduitsMethods Flow in open channels AS 3778.12001 Measurement of water flow in open channels Vocabulary and symbols AS 3778.2.12001 Measurement of water flow in open channels GeneralGuidelines for the selection of methods AS 3778.2.22001 Measurement of water flow in open channels GeneralEstablishment and operation of a gauging station AS 3778.2.32001 Measurement of water flow in open channels GeneralDetermination of the stage-discharge relation AS 3778.2.42007 Measurement of water flow in open channels GeneralEstimation of uncertainty of a flow rate measurement AS 3778.2.52001 Measurement of water flow in open channels GeneralGuidelines for the selection of flow gauging structures AS 3778.3.12001 Measurement of water flow in open channels Velocity-area methodsMeasurement by current meters and floats AS 3778.3.21990 Measurement of water flow in open channels Velocity-area methodsMeasurement by moving-boat method AS 3778.3.32001 Measurement of water flow in open channels Velocity-area methodsMeasurement by slope-area method AS 3778.3.41990 Measurement of water flow in open channels Velocity-area methodsCollection and processing of data for determination of errors in measurement AS 3778.3.51990 Measurement of water flow in open channels Velocity-area methodsInvestigation of total error AS 3778.3.62001 Measurement of water flow in open channels Velocity-area methodsMeasurement of flow in tidal channels AS 3778.3.72007 Measurement of water flow in open channels Velocity-area methodsMeasurement by ultrasonic (acoustic) method AS 3778.3.82007 Measurement of water flow in open channels Velocity-area methodsElectromagnetic method using a fullchannel-width coil AS 3778.4.11991 Measurement of water flow in open channels Measurement using flow gauging structuresThin-plate weirs
AS 1290.81995 Linear measuring instruments used in constructionLevelling staves AS 14571999 Geometrical Product Specifications (GPS)Length standardsGauge blocks AS 16551974 Feeler gauges (metric units) AS 19831977 Spirit level vials AS 19841977 Vernier callipers (metric series) AS 19971977 Plain limit gauges (metric series) AS 20541977 Spirit levels for use in precision engineering AS 21011978 Internal micrometers (including stick micrometers) (metric series) AS 21021989 Micrometer callipers for external measurement AS 21031978 Dial gauges and dial test indicators (metric series) AS 23281980 Micrometer headsMetric series AS 23721980 Engineers' vertical comparators (analogue type) for external measurementMetric series AS 27101984 Screw gaugesVerification AS 28291986 British Association (BA) screw threads and associated gauges and gauging practice AS 37791990 Height setting micrometers and riser blocks AS ISO 149782007 Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment AS B721940 Toolmakers' straightedges AS B831960 Gauge blocks and their accessories AS B1291968 Designs for geometric limit gauges (plain and screwed in inch units) AS B1391955 Bevel protractors (mechanical and optical) AS B2631968 Precision angle plates AS B2691968 Precision vee blocks AS B2941970 Plain setting rings for internal measuring equipment (inch series) Properties of surfaces AS 23821981 Surface roughness comparison specimens LINEN see HOME TEXTILES. LINEN LIVE WORKING see PROTECTION AGAINST ELECTRIC SHOCK. LIVE WORKING MACHINE TOOL SYSTEMS Machine tool systems in general AS 60204.12005 Safety of machineryElectrical equipment of machinesGeneral requirements (IEC60204-1, Ed. 5 (FDIS) MOD) AS 60204.112006 Safety of machineryElectrical equipment of machinesRequirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 6020411, Ed. 1.0 (2000) MOD) MACHINE TOOLS Boring and milling machines AS 4024.31012008 Safety of machineryMaterials cuttingMilling machines (including boring machines)Safety requirements Grinding and polishing machines AS/NZS 60745.2.3:2006 Hand-held Motor-operated Electric Tools SafetyParticular requirements for grinders, polishers and disktype sanders AS/NZS 60745.2.4:2003 Hand-held motor-operated electric tools Safety- Particular requirements for sanders and polishers Machine tools in general MH 31976 Metric conversion: machine tool specifications MAGNETISM see ELECTRICITY. MAGNETISM. ELECTRICAL AND MAGNETIC MEASUREMENTS MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS AS 1731.102003 Refrigerated display cabinetsTest for absence of odour and taste AS/NZS 2007.1 Supplement 1:2001 Performance of household electrical appliancesDishwashersEnergy consumption and performanceTest materialSpinach 800 gm tin AS 20701999 Plastics materials for food contact use AS 2609.12005 Methods for assessing modifications to the flavour of foodstuffs due to packagingSensory analysis AS 2609.21983 Materials used for the packaging of food and beverages Methods for the assessment of odour and taintInstrumental methods AS/NZS 4020:2005 Testing of products for use in contact with drinking water
364
SUBJECT INDEX
AS 3778.4.21991 Measurement of water flow in open channels Measurement using flow gauging structuresRectangular broad-crested weirs AS 3778.4.31991 Measurement of water flow in open channels Measurement using flow gauging structuresRound-nose horizontal broad-crested weirs AS 3778.4.41991 Measurement of water flow in open channels Measurement using flow gauging structuresV-shaped broadcrested weirs AS 3778.4.51991 Measurement of water flow in open channels Measurement using flow gauging structuresTriangular profile weirs AS 3778.4.62007 Measurement of water flow in open channels Measurement using flow gauging structuresFlat-V weirs AS 3778.4.71991 Measurement of water flow in open channels Measurement using flow gauging structuresRectangular, trapezoidal and U-shaped flumes AS 3778.4.101991 Measurement of water flow in open channels Measurement using flow gauging structuresEnd-depth method for estimation of flow in rectangular channels with a free overfall AS 3778.4.111991 Measurement of water flow in open channels Measurement using flow gauging structuresEnd-depth method for estimation of flow in non-rectangular channels with a free overfall (approximate method) AS 3778.5.11991 Measurement of water flow in open channels Dilution methodsConstant-rate injection method for the measurement of steady flow AS 3778.5.21991 Measurement of water flow in open channels Dilution methodsIntegration method for the measurement of steady flow AS 3778.5.32007 Measurement of water flow in open channels Liquid flow in open channels and partly filled pipesGuidelines for the application of Doppler-based flow measurements AS 3778.6.11992 Measurement of water flow in open channels Measuring devices, instruments and equipmentRotating element current-meters AS 3778.6.21992 Measurement of water flow in open channels Measuring devices, instruments and equipmentDirect depth sounding and suspension equipment AS 3778.6.31992 Measurement of water flow in open channels Measuring devices, instruments and equipmentCalibration of rotating element current-meters in straight open tanks AS 3778.6.41992 Measurement of water flow in open channels Measuring devices, instruments and equipmentEcho sounders for water depth measurements AS 3778.6.52001 Measurement of water flow in open channels Measuring devices, instruments and equipmentWater level measuring devices AS 3778.6.62008 Liquid flow measurement in open channels Measuring devices, instruments and equipmentCableway systems for stream gauging AS 3778.6.71992 Measurement of water flow in open channels Measuring devices, instruments and equipmentUltrasonic (acoustic) velocity meters AS 3778.6.81992 Measurement of water flow in open channels Measuring devices, instruments and equipmentPosition fixing equipment for hydrometric boats AS 3778.72008 Measurement of water flow in open channels Determination of volume of water and water level in lakes and reservoirs MEASUREMENT OF FORCE, WEIGHT AND PRESSURE AS EN 1060.12002 Non-invasive sphygmomanometersGeneral requirements AS EN 1060.22002 Non-invasive sphygmomanometersSupplementary requirements for mechanical sphygmomanometers AS EN 1060.32004 Non-invasive sphygmomanometersSupplementary requirements for electromechanical blood pressure measuring systems AS/NZS 1268:1996 Equipment for checking pressure and inflation of tyres AS 13491986 Bourdon tube pressure and vacuum gauges AS 1816.12007 Metallic materialsBrinell hardness testTest method (ISO 6506-1:2005, MOD) AS 1816.22007 Metallic materialsBrinell hardness testVerification and calibration of testing machines AS 1816.32007 Metallic materialsBrinell hardness testCalibration of reference blocks AS 1816.42007 Metallic materialsBrinell hardness testTable of hardness values AS 21932005 Calibration and classification of force-measuring systems
MEASUREMENT OF VOLUME, MASS, DENSITY, VISCOSITY AS 20262003 Laboratory glasswareDensity hydrometers AS 21482004 Milk and liquid milk productsDensity hyrometers for use in products with a surface tension of approximately 45 mN/m AS 2224.11986 Medicine measures (including paediatric droppers)Glass For general use AS 2224.21986 Medicine measures (including paediatric droppers) PlasticsFor domestic use AS 23781996 Density bottles AS 25622005 HydrometersPortable syringe-type for lead-acid batteries AS 28491986 Density of waterNumerical value AS 28511986 Density of mercuryNumerical value AS 3565.12004 Meters for water supplyCold water meters AS 3565.22004 Meters for water supplyCombination meters AS 3565.32004 Meters for water supplyWater meters with integral dual check valves AS 3565.42007 Meters for water supplyIn-service compliance testing AS 3565.52004 Meters for water supplyWater meters with two integral single check valves AS 38821991 RheologyGlossary of terms and classification of properties MEAT, MEAT PRODUCTS AND OTHER ANIMAL PRODUCE Fish and fishery products AS 48842008 Method of test for determination of histamine levels in fish and fish products/seafoods by fluorometric method Poultry and eggs AS 13831974 Methods for the chemical examination of eggs and egg products MECHANICAL CONTRACEPTIVES see BIRTH CONTROL. MECHANICAL CONTRACEPTIVES MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT AS 27561997 Low-voltage switchgear and controlgearMounting rails for mechanical support of electrical equipment MECHANICAL TESTING AS 15451976 Methods for the calibration and grading of extensometers AS 21932005 Calibration and classification of force-measuring systems AS 4433.52005 Guide to the sampling of particulate materialsSampling of slurries AS 60068.2.472003 Environmental testingTestsMounting of compounds, equipment and other articles for vibration, impact and similar dynamic tests AS 60068.2.552003 Environmental testingTestsTest Ee and guidance: Bounce AS 60068.2.772004 Environmental testingTestsTest 77: Body strength and impact shock MEDICAL EQUIPMENT AS/NZS 3200.2.38:2007 Medical electrical equipmentParticular requirements for safetyElectrically and manually operated medical beds for adult use (IEC 60601-2-38, Ed.1.0(1996) MOD) CD HEALTH2006 31 Healthcare Standards on CD Anaesthetic, respiratory and reanimation equipment AS 24881995 Resuscitators intended for use with humans AS/NZS 2496:1995 Breathing attachments for anaesthetic purposes for human use AS 25681991 Medical gasesPurity of compressed medical breathing air AS 29022005 Medical gas systemsLow pressure flexible hose assemblies AS/NZS 3200.2.13:2005 Medical electrical equipmentParticular requirements for safetyAnaesthetic systems AS/NZS 3200.2.21:1994 Approval and test specificationMedical electrical equipmentParticular requirements for safetyInfant radiant warmers AS/NZS 3200.2.200:2005 Medical electrical equipmentParticular requirements for safetyOxygen concentrators for individual patient use AS 3840.11998 Pressure regulators for use with medical gases Pressure regulators and pressure regulators with flow-metering devices AS/NZS 4059:1996 Anaesthetic machinesNon-electricalFor use with humans AS/NZS 4236:1994 Respiratory therapy equipmentJet nebulizers and jet nebulizer air pumps AS/NZS 4237:1994 Respiratory therapy equipmentPeak expiratory flow meters AS 42591995 Ancillary devices for expired air resuscitation
365
MEDICAL EQUIPMENT
SUBJECT INDEX
AS/NZS 3200.3.1:1998 Approval and test specificationMedical electrical equipment- Essential performance requirements for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment AS/NZS 4188:1994 UltrasonicsContinuous-wave Doppler systemsTest procedures AS/NZS 4190:1994 UltrasonicsFieldsGuidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0.5 MHz to 15 MHz AS/NZS 4194:1994 Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment AS/NZS 4354:1995 Medical electrical equipmentRadionuclide calibratorsParticular methods for describing performance AS/NZS 4374:1996 UltrasonicsHand-held probe Doppler foetal heartbeat detectorsPerformance requirements and methods of measurement and reporting AS/NZS 4378:1996 Characteristics and test conditions of radionuclide imaging devicesAnger type gamma cameras AS/NZS 4511:1999 UltrasonicsPressure pulse lithotripters Characteristics of fields AS/NZS 4512:1999 UltrasonicsSurgical systemsMeasurement and declaration of the basic output characteristics AS/NZS 4713:2002 UltrasonicsPhysiotherapy systems Performance requirements and methods of measurement in the frequency range 0.5 MHz to 5 MHz AS/NZS 4966:2002 UltrasonicsPulsed Doppler diagnostic systemsTest procedures to determine performance AS ISO 7376.12002 Laryngoscopic fittingsConventional hook-on type handle blade fittings AS ISO 7376.22002 Laryngoscopic fittingsMiniature electric lampsScrew threads and sockets for conventional blades AS ISO 7376.32002 Laryngoscopic fittingsFibre-illuminated reusable rigid laryngoscopes AS ISO 99192004 Pulse oximeters for medical useRequirements Implants for surgery, prosthetics and orthotics AS 22552003 Implants for surgeryMetal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical threadDimensions AS 2320.22003 Implants for surgeryMetallic materialsUnalloyed titanium AS 2320.32003 Implants for surgeryMetallic materialsWrought titanium 6-aluminium 4-vanadium alloy AS 2320.42003 Implants for surgeryMetallic materialsCobaltchromium-molybdenum casting alloy AS 2320.52003 Implants for surgeryMetallic materialsWrought cobalt-chromium-tungsten-nickel alloy AS 2320.62003 Implants for surgeryMetallic materialsWrought cobalt-nickel-chromium-molybdenum alloy AS/NZS 2817:1997 Implants for surgeryCare and handling of orthopaedic implants AS 38721991 Orthopaedic implantsGeneral requirements for marking, packaging and labelling AS 58332005 Implants for surgeryAcrylic resin cements AS ISO 58402003 Cardiovascular implantsCardiac valve prostheses AS ISO 71982003 Cardiovascular implantsTubular vascular prostheses AS ISO 146022003 Non-active surgical implantsImplants for OsteosynthesisParticular requirements AS ISO 146302003 Non-active surgical implantsGeneral requirements AS ISO 14708.12003 Implants for surgeryActive implantable medical devicesGeneral requirements for safety, marking and for information to be provided by the manufacturer AS ISO 149492003 Implants for surgeryTwo-part addition-cure silicone elastomers AS ISO 155392003 Cardiovascular implantsEndovascular prostheses AS ISO 25539.12003 Cardiovascular implantsEndovascular devicesEndovascular prostheses AS EN 45502.12002 Active implantable medical devicesGeneral requirements for safety, marking and information to be provided by the manufacturer Medical equipment in general AS/NZS CISPR 11:2004 (2nd Edition) Industrial scientific and medical (ISM) radio-frequency equipmentElectromagnetic disturbance characteristicsLimits and methods of measurement
AS ISO 53612004 Anaesthetic and respiratory equipment Tracheal tubes and connectors AS ISO 5366.12004 Anaesthetic respiratory equipment Tracheostomy tubesTubes and connectors for use in adults (ISO 5366-1:2000, MOD) AS ISO 5366.32004 Anaesthetic respiratory equipment Tracheostomy tubesPaediatric tracheostomy tubes (ISO 53663:2001, MOD) AS ISO 81852002 Humidifiers for medical useGeneral requirements for humidification systems AS ISO 9360.12003 Anaesthetic and respiratory equipmentHeat and mositure exchangers (HMEs) for humidifying respired gases in humansHMEs for use with minimum tidal volumes of 250 ml AS ISO 9360.22003 Anaesthetic and respiratory equipmentHeat and mositure exchangers (HMEs) for humidifying respired gases in humansHMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml AS ISO 9703.12002 Anaesthesia and respiratory care alarm signalsVisual alarm signals AS ISO 9703.22002 Anaesthesia and respiratory care alarm signalsAuditory alarm signals AS ISO 10651.12004 Lung ventilators for medical use Requirements AS ISO 10651.22004 Lung ventilators for medical useParticular requirements for home care ventilators AS ISO 10651.32004 Lung ventilators for medical useParticular requirements for emergency and transport ventilators AS ISO 10651.42004 Lung ventilators for medical useParticular requirements for operator-powered resuscitators AS/NZS ISO 11990:2002 Optics and optical instrumentsLasers and laser-related equipmentDetermination of laser resistance of tracheal tube shafts Diagnostic equipment AS EN 1060.12002 Non-invasive sphygmomanometersGeneral requirements AS EN 1060.22002 Non-invasive sphygmomanometers Supplementary requirements for mechanical sphygmomanometers AS EN 1060.32004 Non-invasive sphygmomanometers Supplementary requirements for electromechanical blood pressure measuring systems AS/NZS 3200.2.4:2006 Medical electrical equipmentParticular requirements for safetyCardiac defibrillators AS/NZS 3200.2.7:1999 Medical electrical equipmentParticular requirements for safetyHigh voltage generators of diagnostic Xray generators AS/NZS 3200.2.22:1997 Approval and test specificationMedical electrical equipmentParticular requirements for safety Diagnostic and therapeutic laser equipment AS/NZS 3200.2.23:2001 Medical electrical equipmentParticular requirements for safetyTranscutaneous partial pressure monitoring equipment AS/NZS 3200.2.25:1993 Approval and test specificationMedical electrical equipmentParticular requirements for safety Electrocardiographs AS/NZS 3200.2.26:2005 Medical electrical equipmentParticular requirements for safetyElectroencephalographs AS/NZS 3200.2.26:1995 Approval and test specificationMedical electrical equipmentParticular requirements for safety Electroencephalographs AS/NZS 3200.2.27:1996 Approval and test specificationMedical electrical equipmentParticular requirements for safety Electrocardiographic monitoring equipment AS/NZS 3200.2.30:2001 Medical electrical equipmentParticular requirements for safetyAutomatic cycling non-invasive blood pressure monitoring equipment AS/NZS 3200.2.33:2005 Medical electrical equipmentParticular requirements for safetyMagnetic resonance equipment for medical diagnosis AS/NZS 3200.2.33:1996 Approval and test specificationMedical electrical equipmentParticular requirements for safety Magnetic resonance equipment for medical diagnosis AS/NZS 3200.2.34:1996 Approval and test specificationMedical electrical equipmentParticular requirements for safetyDirect blood-pressure monitoring equipment AS/NZS 3200.2.40:1999 Medical electrical equipmentParticular requirements for safetyElectromyographs and evoked response equipment
366
SUBJECT INDEX
AS EN 5402002 Clinical investigation of medical devices for human subjects AS EN 7242002 Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices AS/NZS 2500:2004 Guide to the safe use of electricity in patient care AS/NZS 3200.1.0:1998 Medical electrical equipmentGeneral requirements for safetyParent Standard AS/NZS 3200.1.1:1995 Approval and test specificationMedical electrical equipmentGeneral requirements for safetyCollateral Standard: Safety requirements for medical electrical systems AS/NZS 3200.1.2:2005 Medical electrical equipmentGeneral requirements for safetyCollateral standard: Electromagnetic compatibilityRequirements and tests AS/NZS 3200.1.3:1996 Approval and test specificationMedical electrical equipmentGeneral requirements for safetyCollateral Standard: Requirements for radiation protection in diagnostic Xray equipment AS/NZS 3200.1.4:1997 Approval and test specificationMedical electrical equipmentGeneral requirements for safetyCollateral Standard: Programmable electrical medical systems AS/NZS 3200.1.8:2005 Medical electrical equipmentGeneral requirements for safetyCollateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems AS/NZS 3200.2.1:1999 Medical electrical equipmentParticular requirements for safetyElectron accelerators in the range of 1 MeV to 50 MeV AS/NZS 3200.2.2:1999 Medical electrical equipmentParticular requirements for safetyHigh frequency surgical equipment AS/NZS 3200.2.4:2006 Medical electrical equipmentParticular requirements for safetyCardiac defibrillators AS/NZS 3200.2.5:2002 Medical electrical equipmentParticular requirements for safetyUltrasonic physiotherapy equipment AS/NZS 3200.2.6:2005 Medical electrical equipmentParticular requirements for safetyMicrowave therapy equipment (IEC 60601-2-6:1984, MOD) AS/NZS 3200.2.7:1999 Medical electrical equipmentParticular requirements for safetyHigh voltage generators of diagnostic Xray generators AS/NZS 3200.2.8:1994 Medical electrical equipmentParticular requirements for safetyTherapeutic X-ray generators AS/NZS 3200.2.9:1997 Approval and test specificationMedical electrical equipmentParticular requirements for safetyPatient contact dosemeters used in radiotherapy with electrically connected detectors AS/NZS 3200.2.11:1999 Medical electrical equipmentParticular requirements for safetyGamma beam therapy equipment AS/NZS 3200.2.13:2005 Medical electrical equipmentParticular requirements for safetyAnaesthetic systems AS/NZS 3200.2.15:1994 Approval and test specificationMedical electrical equipmentParticular requirements for safety Capacitor discharge X-ray generators AS/NZS 3200.2.16:1999 Medical electrical equipmentParticular requirements for safetyHaemodialysis, haemodiafiltration and haemofiltration equipment AS/NZS 3200.2.17:1994 Approval and test specificationMedical electrical equipmentParticular requirements for safety Remote-controlled automatically-driven gamma-ray afterloading equipment AS/NZS 3200.2.18:1997 Approval and test specificationMedical electrical equipmentParticular requirements for safety Endoscopic equipment AS/NZS 3200.2.21:1994 Approval and test specificationMedical electrical equipmentParticular requirements for safetyInfant radiant warmers AS/NZS 3200.2.22:1997 Approval and test specificationMedical electrical equipmentParticular requirements for safety Diagnostic and therapeutic laser equipment AS/NZS 3200.2.23:2001 Medical electrical equipmentParticular requirements for safetyTranscutaneous partial pressure monitoring equipment AS/NZS 3200.2.24:1999 Medical electrical equipmentParticular requirements for safetyInfusion pumps and controllers AS/NZS 3200.2.25:1993 Approval and test specificationMedical electrical equipmentParticular requirements for safety Electrocardiographs
MEDICAL EQUIPMENT
AS/NZS 3200.2.26:2005 Medical electrical equipmentParticular requirements for safetyElectroencephalographs AS/NZS 3200.2.26:1995 Approval and test specificationMedical electrical equipmentParticular requirements for safety Electroencephalographs AS/NZS 3200.2.27:1996 Approval and test specificationMedical electrical equipmentParticular requirements for safety Electrocardiographic monitoring equipment AS/NZS 3200.2.28:1994 Approval and test specificationMedical electrical equipmentParticular requirements for safetyX-ray source assemblies and X-ray tube assemblies for medical diagnosis generators AS/NZS 3200.2.29:2000 Medical electrical equipmentParticular requirements for safetyRadiotherapy simulators AS/NZS 3200.2.30:2001 Medical electrical equipmentParticular requirements for safetyAutomatic cycling non-invasive blood pressure monitoring equipment AS/NZS 3200.2.31:1996 Medical electrical equipmentParticular requirements for safetyExternal cardiac pacemakers with internal power source AS/NZS 3200.2.32:1994 Approval and test specificationMedical electrical equipmentParticular requirements for safety Associated equipment of X-ray equipment AS/NZS 3200.2.33:2005 Medical electrical equipmentParticular requirements for safetyMagnetic resonance equipment for medical diagnosis AS/NZS 3200.2.33:1996 Approval and test specificationMedical electrical equipmentParticular requirements for safety Magnetic resonance equipment for medical diagnosis AS/NZS 3200.2.34:1996 Approval and test specificationMedical electrical equipmentParticular requirements for safetyDirect blood-pressure monitoring equipment AS/NZS 3200.2.35:1999 Medical electrical equipmentParticular requirements for safetyBlankets, pads and mattresses intended for heating in medical use AS/NZS 3200.2.36:1998 Approval and test specificationMedical electrical equipmentParticular requirements for safety Extracorporeally induced lithotripsy AS/NZS 3200.2.38:2007 Medical electrical equipmentParticular requirements for safetyElectrically and manually operated medical beds for adult use (IEC 60601-2-38, Ed.1.0(1996) MOD) AS/NZS 3200.2.38:1997 Approval and test specificationMedical electrical equipmentParticular requirements for safety Electrically operated hospital beds AS/NZS 3200.2.39:2001 Medical electrical equipmentParticular requirements for safetyPeritoneal dialysis equipment AS/NZS 3200.2.40:1999 Medical electrical equipmentParticular requirements for safetyElectromyographs and evoked response equipment AS/NZS 3200.2.41:2002 Medical electrical equipmentParticular requirements for safetySurgical luminaires and luminaires for diagnosis AS/NZS 3200.2.43:2002 Medical electrical equipmentParticular requirements for safetyX-ray equipment for interventional procedures (IEC 60601-2-43:2000, MOD) AS/NZS 3200.2.44:2005 Medical electrical equipmentParticular requirements for safetyX-ray equipment for computed tomography AS/NZS 3200.2.44:2000 Medical electrical equipmentParticular requirements for safetyX-ray equipment for computed tomography AS/NZS 3200.2.45:1999 Medical electrical equipmentParticular requirements for safetyMammographic X-ray equipment and mammographic stereotactic devices AS/NZS 3200.2.46:2003 Medical electrical equipment- Particular requirements for the safety of operating tables AS/NZS 3200.2.200:2005 Medical electrical equipmentParticular requirements for safetyOxygen concentrators for individual patient use AS/NZS 3200.2.201:2000 Medical electrical equipmentParticular requirements for safetyDento-maxillofacial X-ray equipment AS/NZS 3200.2.202:1996 Approval and test specificationMedical electrical equipmentParticular requirements for safetyInfant apnoea monitors for domestic use AS/NZS 3200.3.1:1998 Approval and test specificationMedical electrical equipment- Essential performance requirements for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment
367
MEDICAL EQUIPMENT
SUBJECT INDEX
HB 3042007 Guide to Australian electronic communication in health care HB 3062007 User interface requirements for the presentation of health data Radiographic equipment AS/NZS 3200.1.3:1996 Approval and test specificationMedical electrical equipmentGeneral requirements for safetyCollateral Standard: Requirements for radiation protection in diagnostic Xray equipment AS/NZS 3200.2.8:1994 Medical electrical equipmentParticular requirements for safetyTherapeutic X-ray generators AS/NZS 3200.2.15:1994 Approval and test specificationMedical electrical equipmentParticular requirements for safety Capacitor discharge X-ray generators AS/NZS 3200.2.17:1994 Approval and test specificationMedical electrical equipmentParticular requirements for safety Remote-controlled automatically-driven gamma-ray afterloading equipment AS/NZS 3200.2.28:1994 Approval and test specificationMedical electrical equipmentParticular requirements for safetyX-ray source assemblies and X-ray tube assemblies for medical diagnosis generators AS/NZS 3200.2.29:2000 Medical electrical equipmentParticular requirements for safetyRadiotherapy simulators AS/NZS 3200.2.32:1994 Approval and test specificationMedical electrical equipmentParticular requirements for safety Associated equipment of X-ray equipment AS/NZS 3200.2.44:2005 Medical electrical equipmentParticular requirements for safetyX-ray equipment for computed tomography AS/NZS 3200.2.44:2000 Medical electrical equipmentParticular requirements for safetyX-ray equipment for computed tomography AS/NZS 3200.2.45:1999 Medical electrical equipmentParticular requirements for safetyMammographic X-ray equipment and mammographic stereotactic devices AS/NZS 3200.2.201:2000 Medical electrical equipmentParticular requirements for safetyDento-maxillofacial X-ray equipment AS/NZS 4184.1:1994 Evaluation and routine testing in medical imaging departmentsGeneral aspects AS/NZS 4184.2.1:1994 Evaluation and routine testing in medical imaging departmentsConstancy testsFilm processors AS/NZS 4184.2.2:1994 Evaluation and routine testing in medical imaging departmentsConstancy testsRadiographic cassettes and film changersFilm-screen contact and relative sensitivity of the screen-cassette assembly AS/NZS 4184.2.3:1994 Evaluation and routine testing in medical imaging departmentsConstancy testsDarkroom safelight conditions AS/NZS 4184.2.4:1995 Evaluation and routine testing in medical imaging departmentsConstancy testsHard copy cameras AS/NZS 4184.2.5:1995 Evaluation and routine testing in medical imaging departmentsConstancy testsImage display devices AS/NZS 4184.2.6:1995 Evaluation and routine testing in medical imaging departmentsConstancy testsX-ray equipment for computed tomography AS/NZS 4184.2.7:2002 Evaluation and routine testing in medical imaging departmentsConstancy testsEquipment for intra-oral dental radiography (IEC 61223-2-7:1999, MOD) AS/NZS 4184.2.9:2002 Evaluation and routine testing in medical imaging departmentsConstancy testsEquipment for indirect radioscopy and indirect radiography AS/NZS 4184.2.11:2002 Evaluation and routine testing in medical imaging departmentsConstancy testsEquipment for general direct radiography AS/NZS 4184.3.1:2002 Evaluation and routine testing in medical imaging departmentsAcceptance testsImaging performance of X-ray equipment for radiographic and radioscopic systems AS/NZS 4184.3.2:1998 Evaluation and routine testing in medical imaging departmentsAcceptance testsImaging performance of mammographic X-ray equipment AS/NZS 4184.3.3:1998 Evaluation and routine testing in medical imaging departmentsAcceptance testsImaging performance of X-ray equipment for digital subtraction angiography (DSA) AS/NZS 4184.3.4:2002 Evaluation and routine testing in medical imaging departmentsAcceptance testsImaging performance of dental X-ray equipment AS/NZS 4213.1:1994 Radiotherapy simulatorsFunctional performance characteristics
AS/NZS 3551:2004 Technical management programs for medical devices AS/NZS 4434.1:1996 Medical electrical equipmentMedical electron acceleratorsFunctional performance characteristics AS/NZS 4434.2:1996 Medical electrical equipmentMedical electron acceleratorsPeriodic function performance testing AS/NZS 4513:1995 Medical electrical equipmentFundamental aspects of safety Standards AS/NZS 4580:1999 Medical electrical equipmentDigital imaging and communications in medicine (DICOM)Radiotherapy objects AS/NZS 4810.1:2000 Medical devicesRisk management Application of risk analysis AS/NZS 4957:2002 Medical electrical equipmentDose area product meters AS ISO 99182004 Capnometers for use with humans Requirements AS ISO 10993.92002 Biological evaluation of medical devices Framework for identification and quantification of potential degradation products AS ISO 10993.112002 Biological evaluation of medical devices Tests for systemic toxicity AS ISO 10993.122004 Biological evaluation of medical devices Sample preparation and reference materials AS ISO 10993.132002 Biological evaluation of medical devices Identification and quantification of degradation products from polymeric medical devices AS ISO 10993.162002 Biological evaluation of medical devices Toxicokinetic study design for degradation products and leachables AS ISO 111352002 Medical devicesValidation and routine control of ethylene oxide sterilization AS ISO 134852003 Medical devicesQuality management systemsRequirements for regulatory purposes AS ISO 152252003 NomenclatureSpecification for a nomenclature system for medical devices for the purpose of regulatory data exchange AS EN 460032002 Quality systemsMedical devicesParticular requirements for the application of ISO 9003 CD HEALTH2006 31 Healthcare Standards on CD HB 3062007 User interface requirements for the presentation of health data Ophthalmic equipment AS 2228.11992 SpectaclesSpectacle lenses AS 2228.21992 SpectaclesSpectacle frames AS ISO 11979.12003 Opthalmic implantsIntraocular lenses Vocabulary AS ISO 11979.22003 Opthalmic implantsIntraocular lenses Optical properties and test methods AS ISO 11979.32003 Opthalmic implantsIntraocular lenses Mechanical properties and test methods AS ISO 11979.42003 Opthalmic implantsIntraocular lenses Labelling and information AS ISO 11979.52003 Opthalmic implantsIntraocular lenses Biocompatibility AS ISO 11979.62003 Opthalmic implantsIntraocular lenses Shelf-life and transport stability AS ISO 11979.72003 Opthalmic implantsIntraocular lenses Clinical investigations AS ISO 11979.82003 Opthalmic implantsIntraocular lenses Fundamental requirements AS ISO 145342003 Opthalmic opticsContact lenses and contact lens care productsFundamental requirements AS/NZS ISO 15004:2002 Ophthalmic instrumentsFundamental requirements and test methods Other medical equipment AS 2120.11992 Medical suction equipmentElectrically-powered suction equipmentSafety requirements AS 2120.21992 Medical suction equipmentManually-powered suction equipment AS 2120.31992 Medical suction equipmentSuction equipment powered from a vacuum or pressure source AS 28961998 Medical gas systemsInstallation and testing of nonflammable medical gas pipeline systems AS/NZS 4173:2004 Guide to the safe use of lasers in health care AS/NZS 4375:1996 User-applied labels for use on syringes containing drugs used during anaesthesia
368
SUBJECT INDEX
AS/NZS 4213.2:1994 Radiotherapy simulatorsGuidelines for functional performance characteristics AS/NZS 4274:1995 X-ray tube assemblies for medical diagnosis Characteristics of focal spots AS/NZS 4356.1:1996 Medical electrical equipmentCharacteristics of electro-optical X-ray image intensifiersDetermination of the entrance field size AS/NZS 4356.2:1996 Medical electrical equipmentCharacteristics of electro-optical X-ray image intensifiersDetermination of the conversion factor AS/NZS 4356.3:1996 Medical electrical equipmentCharacteristics of electro-optical X-ray image intensifiersDetermination of the luminance distribution and luminance non-uniformity AS/NZS 4356.4:1996 Medical electrical equipmentCharacteristics of electro-optical X-ray image intensifiersDetermination of the image distortion AS/NZS 4356.5:1996 Medical electrical equipmentCharacteristics of electro-optical X-ray image intensifiersDetermination of the detective quantum efficiency AS/NZS 4356.6:1996 Medical electrical equipmentCharacteristics of electro-optical X-ray image intensifiersDetermination of the contrast ratio and veiling glare index AS/NZS 4356.7:1996 Medical electrical equipmentCharacteristics of electro-optical X-ray image intensifiersDetermination of the modulation transfer function AS/NZS 4358:1996 Medical diagnostic X-ray equipmentRadiation conditions for use in the determination of characteristics AS/NZS 4394:1996 Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis AS/NZS 4495:1997 Radiotherapy equipmentCoordinates, movements and scales AS/NZS 4537:1999 Medical electrical equipmentDosimeters with ionization chambers as used in radiotherapy AS/NZS 4543.1:1999 Protective devices against diagnostic medical X-radiationDetermination of attenuation properties of materials AS/NZS 4543.2:1999 Protective devices against diagnostic medical X-radiationProtective glass plates AS/NZS 4543.3:2000 Protective devices against diagnostic medical X-radiationProtective clothing and protective devices for gonads AS/NZS 4545.1:1999 Radionuclide imaging devices Characteristics and test conditionsPositron emission tomographs AS/NZS 4545.2:1999 Radionuclide imaging devices Characteristics and test conditionsSingle photon emission computed tomographs AS/NZS 4545.3:1999 Radionuclide imaging devices Characteristics and test conditionsGamma camera based wholebody imaging systems AS/NZS 4580:1999 Medical electrical equipmentDigital imaging and communications in medicine (DICOM)Radiotherapy objects HB 3042007 Guide to Australian electronic communication in health care Surgical instruments and materials AS 1679.12005 Reusable all-glass or metal-and-glass syringes for medical useDimensions AS 1679.22005 Reusable all-glass or metal-and-glass syringes for medical useDesign, performance requirements and tests AS 2836.01998 Methods of testing surgical dressings and surgical dressing materialsGeneral introduction and list of methods AS 2836.11998 Methods of testing surgical dressings and surgical dressing materialsMethod for the determination of loss of mass on drying AS 2836.21998 Methods of testing surgical dressing and surgical dressing materialsMethod for the identification of cotton and viscose fibres AS 2836.31998 Methods of testing surgical dressing and surgical dressing materialsMethod for the determination of mass per unit area AS 2836.41998 Methods of testing surgical dressings and surgical dressing materialsMethod for the determination of size AS 2836.51998 Methods of testing surgical dressings and surgical dressing materialsMethod for the determination of sinking time AS 2836.61998 Methods of testing surgical dressings and surgical dressing materialsMethod for the determination of absorption rate and water holding capacity
MEDICAL EQUIPMENT
AS 2836.71998 Methods of testing surgical dressings and surgical dressing materialsMethod for the determination of level of surface-active substances AS 2836.81998 Methods of testing surgical dressings and surgical dressing materialsMethod for the determination of quantity of water-soluble substances AS 2836.91998 Methods of testing surgical dressings and surgical dressing materialsMethod for the determination of the presence of starch and dextrins AS 2836.101998 Methods of testing surgical dressings and surgical dressing materialsMethod for the determination of the presence of fluorescing substances AS 2836.111998 Methods of testing surgical dressings and surgical dressing materialsMethod for the determination of sulfated ash content AS/NZS 3200.2.2:1999 Medical electrical equipmentParticular requirements for safetyHigh frequency surgical equipment AS/NZS 3200.2.18:1997 Approval and test specificationMedical electrical equipmentParticular requirements for safety Endoscopic equipment AS/NZS 3200.2.41:2002 Medical electrical equipmentParticular requirements for safetySurgical luminaires and luminaires for diagnosis AS/NZS 3825:1998 Procedures and devices for the removal and disposal of scalpel blades from scalpel handles AS 4369.11996 Surgical dressingsSingle-use X-ray detectable abdominal sponges AS 4369.21996 Surgical dressingsGeneral purpose single-use woven gauze swabs AS 4369.31996 Surgical dressingsSingle-use packing gauze AS 4369.41996 Surgical dressingsAbsorbent wadding AS 44981997 70% isopropyl alcohol impregnated swabsSterile AS ISO 77402004 Instruments for surgeryScalpels with detachable bladesFitting dimensions AS ISO 160612003 Instrumentation for use in association with non-active surgical implantsGeneral requirements Syringes, needles and catheters AS 10771992 Single-use syringes (sterile) for the injection of 100 units per millilitre insulin (U-100) AS 1094.12004 Sterile hypodermic syringes for single use Syringes for manual use AS 1600.12004 Medical equipmentConical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipmentGeneral requirements AS 1600.22003 Medical equipmentConical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipmentLock fittings AS 1679.12005 Reusable all-glass or metal-and-glass syringes for medical useDimensions AS 1679.22005 Reusable all-glass or metal-and-glass syringes for medical useDesign, performance requirements and tests AS 19462002 Sterile hypodermic needles for single use AS 21452002 Stainless steel needle tubing for manufacture of medical devices AS 49392001 Non-reusable personal use containers for the collection and disposal of hypodermic needles and syringes AS 49402002 User-applied identification labels for use on fluid bags, syringes and drug administration lines AS ISO 10555.12002 Sterile, single-use intravascular catheters General requirements Therapy equipment AS/NZS 3200.2.5:2002 Medical electrical equipmentParticular requirements for safetyUltrasonic physiotherapy equipment AS/NZS 3200.2.6:2005 Medical electrical equipmentParticular requirements for safetyMicrowave therapy equipment (IEC 60601-2-6:1984, MOD) AS/NZS 3200.2.11:1999 Medical electrical equipmentParticular requirements for safetyGamma beam therapy equipment AS/NZS 3200.2.16:1999 Medical electrical equipmentParticular requirements for safetyHaemodialysis, haemodiafiltration and haemofiltration equipment AS/NZS 3200.2.31:1996 Medical electrical equipmentParticular requirements for safetyExternal cardiac pacemakers with internal power source AS/NZS 3200.2.36:1998 Approval and test specificationMedical electrical equipmentParticular requirements for safety Extracorporeally induced lithotripsy
369
SUBJECT INDEX
AS/NZS 4700.3:1999 Implementation of Health Level Seven (HL7) Version 2.3Electronic messages for exchange of information on drug prescription AS 4700.5(Int)2007 Implementation of Health Level Seven (HL7) Version 2.5Immunization messages AS 4700.52005 Implementation of Health Level Seven (HL7) Version 2.4 Immunization messages AS 4700.52002 Implementation of Health Level Seven (HL7) Version 2.3.1Immunization Messages AS 4700.6(Int)2007 Implementation of Health Level Seven (HL7) Version 2.5Referral, discharge and health record messaging AS 4700.62006 Implementation of Health Level Seven (HL7) Version 2.4 Referral, discharge and health record messaging AS 4700.62004 Implementation of Health Level Seven (HL7) Version 2.3.1Referral and discharge summary AS 4700.72005 Implementation of Health Level Seven (HL7) Version 2.3.1Diagnostic imaging orders and results AS 48462006 Health Care Provider Identification AS 48462004 Health care provider identification AS 50172006 Health Care Client Identification AS 50212005 The language of health concept representation ATS 50382006 Health supply chain messagingEvaluated receipts settlement AS ISO 183082005 Health InformaticsRequirements for an electronic health record architecture (ISO/TS 18308:2004, MOD) HB 172.12006 Message Usage ModelHistory and conceptual framework HB 172.22006 Message Usage ModelCurrent Standards HB 2222006 Australian Health Care Client and Provider Identification Handbook HB 2352007 Implementers guideline for HL7 referral, discharge and health record messaging HB 2622008 Guidelines for pathology messaging between pathology providers and health service providers HB 3032007 Guide to the use of abbreviations, acronyms and local terms in health care HB 3042007 Guide to Australian electronic communication in health care HB 3062007 User interface requirements for the presentation of health data HB 3072007 Guide to the principles and desirable features of clinical decision support systems MP 912000 Dynamic approaches to healthcare risk management MP 962008 Standards for enterprise-wide patient administration systems MP 972008 Standards for enterprise-wide clinical information systems TR 29612007 Telehealth standards scoping study TR 29652007 Harmonisation of HD and EI data types across AS 4700.X Standards and associated Handbooks TR 29662007 Standardization of Hierarchic Designators in HL7 messaging TR 48902008 HL7 messaging requirements for scheduling, bed availability, consent and eligibility METALLIFEROUS MINERALS AND THEIR CONCENTRATES Aluminium ores AS 25641982 Aluminium oresDetermination of aluminium, silicon, iron, titanium and phosphorus contentsWavelength dispersive X-ray fluorescence spectrometric method AS 2806.12003 Aluminium oresSamplingSampling procedures AS 2806.32001 Aluminium oresSamplingPreparation of samples AS 2806.42004 Aluminium oresSamplingDetermination of heterogeneity of constitution AS 2806.52003 Aluminium oresSamplingMethods for checking the precision of sampling AS 2806.62003 Aluminium oresSamplingMethods for checking the bias of sampling AS 2806.72004 Aluminium oresSamplingDetermination of quality variation (ISO6139:1993, MOD) AS 2932.22002 Aluminium oresChemical analysisDetermination of the moisture content of bulk material AS 2932.32004 Aluminium oresChemical analysisDetermination of loss of mass at 1000C Iron ores ASCRM 0071985 Certified reference iron ore (Dampier Lump) TR 2.71985 Certified reference materialsIron orePreparation and certification of ASCRM 007 (Dampier Lump)
AS/NZS 3200.2.39:2001 Medical electrical equipmentParticular requirements for safetyPeritoneal dialysis equipment AS/NZS 3200.2.43:2002 Medical electrical equipmentParticular requirements for safetyX-ray equipment for interventional procedures (IEC 60601-2-43:2000, MOD) AS 4774.22002 Work in compressed air and hyperbaric facilities Hyperbaric oxygen facilities AS EN 45502.12002 Active implantable medical devicesGeneral requirements for safety, marking and information to be provided by the manufacturer Transfusion, infusion and injection equipment AS 10771992 Single-use syringes (sterile) for the injection of 100 units per millilitre insulin (U-100) AS 1094.12004 Sterile hypodermic syringes for single use Syringes for manual use AS 1600.12004 Medical equipmentConical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipmentGeneral requirements AS 1600.22003 Medical equipmentConical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipmentLock fittings AS 1679.12005 Reusable all-glass or metal-and-glass syringes for medical useDimensions AS 1679.22005 Reusable all-glass or metal-and-glass syringes for medical useDesign, performance requirements and tests AS 19462002 Sterile hypodermic needles for single use AS 21452002 Stainless steel needle tubing for manufacture of medical devices AS 23851990 Single-use (sterile) infusion sets for general medical use AS/NZS 2485:1995 Medical equipmentSingle-use winged intravenous devices (sterile) for general medical use AS/NZS 3200.2.24:1999 Medical electrical equipmentParticular requirements for safetyInfusion pumps and controllers AS/NZS 3770:1993 Guide to the safe use of infusion pumps and controllers AS 48852006 Transfusion sets for single use AS 49392001 Non-reusable personal use containers for the collection and disposal of hypodermic needles and syringes AS 49402002 User-applied identification labels for use on fluid bags, syringes and drug administration lines AS 85362006 Infusion sets for single use, gravity feed AS ISO 10555.12002 Sterile, single-use intravascular catheters General requirements MEDICAL SCIENCES AND HEALTH CARE FACILITIES IN GENERAL AS 28281999 Paper-based health care records AS/NZS 3009:1998 Electric installationsEmergency power supplies in hospitals AS/NZS 3824:1998 Guidelines for radiotherapy treatment rooms design AS 40831997 Planning for emergenciesHealth care facilities AS 4485.11997 Security for health care facilitiesGeneral requirements AS 4485.21997 Security for health care facilitiesProcedures guide AS 4700.12006 Implementation of Health Level Seven (HL7) Version 2.5 Patient administration AS 4700.12005 Implementation of Health Level Seven (HL7) Version 2.4 Patient administration AS 4700.12001 Implementation of Health Level Seven (HL7) Version 2.3.1.Patient administration AS 4700.11998 Implementation of Health Level Seven (HL7) Version 2.3 Patient administration AS 4700.11997 Implementation of Health Level Seven (HL7) Version 2.2 Admission, discharge and transfer AS 4700.22007 Implementation of Health Level Seven (HL7) Version 2.4 Pathology and medical imaging (diagnostics) AS 4700.22004 Implementation of Health Level Seven (HL7) Version 2.3.1Pathology orders and results AS 4700.21998 Implementation of Health Level Seven (HL7) Version 2.3 Pathology orders and results AS 4700.3(Int)2007 Implementation of Health Level Seven (HL7) Version 2.5Electronic messages for exchange of information on drug prescription AS 4700.32005 Implementation of Health Level Seven (HL7) Version 2.4 Electronic messages for exchange of information on drug prescription AS/NZS 4700.3:2002 Implementation of Health Level Seven (HL7) Version 2.3.1Electronic messages for exchange of information on drug prescription
370
SUBJECT INDEX
Other metalliferous minerals AS 2489.52003 Methods for the analysis of zircon sand concentratesDetermination of zirconium plus hafnium content (Gravimetric method) AS 2489.112003 Methods for the analysis of zircon sand concentratesDetermination of acid demand value AS 2678.12008 Zinc sulfide concentratesChemical analysis Determination of zincSolvent extraction and EDTA titrimetric method AS 2678.22008 Zinc sulfide concentratesChemical analysis Determination of zincIon-exchange/EDTA titrimetric method AS 2678.32002 Zinc sulfide concentratesChemical analysis Determination of zinc contentHydroxide precipitation and EDTA titrimetric method AS 2678.42002 Zinc sulfide concentratesChemical analysis Determination of silver contentAcid dissolution and flame atomic absorption spectrometric method AS 2678.62002 Zinc sulfide concentratesChemical analysis Determination of gold contentAcid dissolution/solvent extraction/flame absorption spectrometic method AS 27152003 Heavy mineral sand concentratesDetermination of pH value AS 28161992 Copper, lead and zinc sulfide concentrates Determination of hygroscopic moisture in the analysis sample Gravimetric method AS 2862.12008 Copper, lead, zinc and nickel concentrates SamplingSampling procedures for determination of metal and moisture content AS 2862.22008 Copper, lead, zinc and nickel concentrates SamplingExperimental methods for checking the precision of sampling AS 2862.32008 Copper, lead, zinc and nickel concentrates SamplingExperimental methods for checking the bias of sampling AS 28632008 Copper, lead, zinc and nickel concentrates Determination of mass loss of bulk material on drying AS 2879.12000 AluminaDetermination of loss of mass at 300C and 1000C AS 2879.22003 AluminaDetermination of particles passing a 20 g aperture sieve AS 2879.31991 AluminaDetermination of alpha alumina content by X-ray diffraction AS 2879.42003 AluminaDetermination of specific surface area by nitrogen adsorption AS 2879.52004 AluminaDetermination of angle of flow AS 2879.61995 AluminaDetermination of the mass distribution of particle sizes using electroformed sieves AS 2879.71997 AluminaDetermination of trace elements Wavelength dispersive X-ray fluorescence spectrometric method AS 2879.82000 AluminaDetermination of bulk density AS 2879.92002 AluminaDetermination of flow time AS 2879.102003 AluminaDetermination of attrition index AS 2879.112004 AluminaGuide to reporting Al2O3 content of smelter-grade alumina AS 2879.122004 AluminaDetermination of the angle of repose AS 2884.11997 Heavy mineral sand concentratesSampling Moving streams AS 2884.22003 Heavy mineral sand concentratesSampling Sampling from stationary situations AS 2884.32003 Heavy mineral sand concentratesSampling Preparation of samples AS 2884.41997 Heavy mineral sand concentratesSampling Determination of precision and bias AS 2917.11994 Copper sulfide concentratesDetermination of copper contentTitrimetric methods AS 2917.32008 Copper sulfide concentratesDetermination of copperElectrogravimetric method AS 3895.11991 Methods for the analysis of copper, lead, zinc, gold and silver oresDetermination of gold (Fire assayFlame AAS method) AS 39881991 Copper, lead, zinc, gold and silver oresGuide to sample preparation for the determination of gold AS 4030.12002 Lead sulfide concentratesChemical analysis Determination of lead contentEDTA titration method after acid digestion
AS 4030.21996 Methods for the analysis of lead sulfide concentratesDetermination of lead contentBack titration of EDTA after precipitation of lead sulfate AS 4350.12005 Heavy mineral sand concentratesPhysical testingSize analysis AS 4350.21999 Heavy mineral sand concentratesPhysical testingDetermination of heavy minerals and free quartzHeavy liquid separation method AS 4392.11996 Heavy mineral sandsAnalysis by wavelength dispersive X-ray fluorescence spectrometryTitaniferous mineral sands AS 4392.21997 Heavy mineral sandsAnalysis by wavelength dispersive X-ray fluorescence spectrometryZircon materials AS 4538.11999 Guide to the sampling of aluminaSampling procedures AS 4538.22000 Guide to the sampling of aluminaPreparation of samples AS 45951999 Copper, lead and zinc sulfide concentrates Precision and bias of mass measurement techniques AS 45961999 Copper, lead and zinc sulfide concentrates Determination of mass of contained metal in a lot AS 4614.11999 Methods for the analysis of ilmenite Determination of titanium contentTitrimetric method AS 4868.12008 Copper, lead and zinc sulfide concentrates Chemical analysisDetermination of gold and silverFire assay gravimetric and flame atomic absorption spectrometric method AS 49742008 Copper, lead and zinc sulfide concentrates Determination of transportable moisture limitsFlow-table method ASCRM 0081985 Certified reference zircon sand concentrate ASCRM 0252003 Certified reference materialAlumina ASCRM 0262003 Certified reference materialAlumina TR 2.81985 Certified reference materialsZircon sand concentratePreparation and certification of ASCRM 008 TR 2.252003 Certified reference materialsAluminaPreparation and certification of ASCRM 025 TR 2.262003 Certified reference materialsAluminaPreparation and certification of ASCRM 026 METROLOGY AND MEASUREMENT IN GENERAL AS ISO 10001998 The international system of units (SI) and its application AS/NZS 1376:1996 Conversion factors AS 20832005 Calibration blocks and their methods of use in ultrasonic testing AS 27062003 Numerical valuesRounding and interpretation of limiting values AS 27522003 Preferred numbers and their use AS 28331985 MetrologySymbols for expressing uncertainty of measurements AS 38071998 Vocabulary of basic and general terms in metrology AS 38701991 Certified reference materialsGeneral guide to material selection, preparation, testing and certification AS/NZS ISO 10012:2004 Measurement management systems Requirements for measurement processes and measuring equipment AS ISO 11843.12004 Capability of detectionTerms and definitions AS Z301966 Interconversion of inch and metric dimensions HB 86.1:1996 A guide to the selection, care, calibration and checking of measuring instruments in industryGeneral principles HB 86.2:1998 A guide to the selection, care, calibration and checking of measuring instruments in industrySimple length and angle measuring instruments HB 1872006 Guide to selecting a safe multimeter MICROBIOLOGY Food microbiology AS 1766.01995 Food microbiologyGeneral introduction and list of methods AS 1766.1.41991 Food microbiologyGeneral procedures and techniquesColony countSurface spread method AS 1766.1.51991 Food microbiologyGeneral procedures and techniquesColony countMembrane filtration method AS 1766.1.61991 Food microbiologyGeneral procedures and techniquesEstimation of the most probable number (MPN) of microorganisms AS 1766.2.21997 Food microbiologyExamination for specific organismsColony count of yeasts and moulds AS/NZS 1766.2.9:1997 Food microbiologyExamination for specific organismsVibrio parahaemolyticus
371
MICROBIOLOGY
SUBJECT INDEX
AS 5013.12.12004 Food microbiology- Microbiology of food and animal feeding stuffsHorizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species)Technique using Baird-Parker agar medium AS 5013.12.22004 Food microbiology- Microbiology of food and animal feeding stuffsHorizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species)Technique using rabbit plasma fibrinogen agar medium AS 5013.12.32004 Food microbiology- Microbiology of food and animal feeding stuffsHorizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species)Detection and MPN technique for low numbers AS 5013.142004 Food microbiologyMicrobiology of food and animal feeding stuffsGeneral rules for microbiological examinations AS 5013.152006 Food microbiologyMicrobiology of food and animal feeding stuffsHorizontal method for the detection and enumeration of presumptive Escherichia coliMost probable number technique AS 5013.162006 Food microbiologyMicrobiology of food and animal feeding stuffsHorizontal method for the enumeration of Clostridium perfringensColony-count technique AS 5013.172004 Food microbiologyMilk and milk products General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination AS 5013.202004 Food microbiologyPreparation of test samples for microbiological examinationPoultry and poultry products AS 5013.212004 Food microbiologyMeat and meat products Enumeration of Pseudomonas spp. AS 5013.222004 Food microbiologyMeat and meat products Enumeration of Brochothrix thermosphactaColony-count technique AS 5013.232004 Food microbiologyMicrobiology of food and animal feeding stuffsHorizontal method for the enumeration of psychrotrophic microorganisms HB 2242001 Handbook for microbiological testing in food premises Medical microbiology AS EN 1174.12002 Sterilization of medical devicesEstimation of the population of micro-organisms on productRequirements AS EN 1174.22002 Sterilization of medical devicesEstimation of the population of micro-organisms on productGuidance AS EN 1174.32002 Sterilization of medical devicesEstimation of the population of micro-organisms on productGuide to the methods for validation of microbiological techniques Microbiology in general AS/NZS 2243.3:2002 Safety in laboratoriesMicrobiological aspects and containment facilities AS 48342007 Packaging for surface transport of biological material that may cause disease in humans, animals and plants Microbiology of water AS/NZS 2031:2001 Selection of containers and preservation of water samples for microbiological analysis AS/NZS 3666 Set:2006 Air-handling and water systems of buildings Set AS/NZS 3666.1:2002 Air-handling and water systems of buildings Microbial controlDesign, installation and commissioning AS/NZS 3666.1:1995 Air-handling and water systems of buildings Microbial controlDesign, installation and commissioning AS/NZS 3666.2:2002 Air-handling and water systems of buildings Microbial controlOperation and maintenance AS/NZS 3666.2:1995 Air-handling and water systems of buildings Microbial controlOperation and maintenance AS/NZS 3666.3:2000 Air-handling and water systems of buildings Microbial controlPerformance-based maintenance of cooling water systems AS/NZS 3896:2008 WatersExamination for Legionella spp. including Legionella pneumophila AS 4276.01995 Water microbiologyIntroduction and list of methods AS/NZS 4276.1:2007 Water microbiologyGeneral information and procedures (ISO 8199:2005, MOD) AS 4276.21995 Water microbiologyCulture media, diluents and reagents AS/NZS 4276.3.1:2007 Water microbiologyHeterotrophic colony count methodsPour plate method using yeast extract agar
AS/NZS 1766.2.12:2002 Food microbiologyExamination for specific organismsEscherichia coli in bivalve molluscsRapid method AS/NZS 1766.2.15:1998 Food microbiologyExamination for specific organismsListeria monocytogenes in dairy products AS/NZS 1766.2.16.1:1998 Food microbiologyExamination for specific organismsFood and animal feeding stuffsHorizontal method for the detection and enumeration of Listeria monocytogenesDetection method AS 1766.3.11991 Food microbiologyExamination of specific productsMeat and meat products other than poultry AS/NZS 1766.3.5:1999 Food microbiologyExamination of specific productsMolluscs, crustaceans and fish, and products thereof AS 1766.3.111991 Food microbiologyExamination of specific productsDairy productsTest for penicillin AS 1766.3.121992 Food microbiologyExamination of specific productsCultured dairy products AS 1766.3.131994 Food microbiologyExamination of specific productsLiquid milks and creams AS/NZS 1766.3.14:1998 Food microbiologyExamination of specific productsButter, margarine and related products AS 1766.3.151994 Food microbiologyExamination of specific productsCheese AS/NZS 1766.3.17:1997 Food microbiologyExamination of specific productsSweetened condensed milks AS 1766.51994 Food microbiologyPreparation of culture media, diluents and reagents AS/NZS 4659.1:1999 Guide to determining the equivalence of food microbiology test methodsQualitative tests AS/NZS 4659.2:1999 Guide to determining the equivalence of food microbiology test methodsQuantitative tests AS/NZS 4659.3:1999 Guide to determining the equivalence of food microbiology test methodsConfirmation tests AS/NZS 4659.4:1999 Guide to determining the equivalence of food microbiology test methodsAntibiotic tests AS 5013.12004 Food microbiologyExamination for specific organismsStandard plate count AS 5013.22007 Food microbiologyMicrobiology of food and animal feeding stuffsHorizontal method for the enumeration of Bacillus cereusColony-count technique at 30C (ISO 7932:2004, MOD) AS 5013.32004 Food microbiologyMicrobiologyGeneral guidance for the enumeration of coliformsMost probable number technique AS 5013.42004 Food microbiologyMicrobiologyGeneral guidance for the enumeration of coliformsColony count technique AS 5013.52004 Food microbiologyMicrobiology of food and animal feeding stuffsHorizontal method for the enumeration of microorganismsColony count technique at 30C AS 5013.62004 Food microbiologyExamination for specific organismsCampylobacter AS 5013.72004 Food microbiologyExamination of specific productsEggs and egg products AS 5013.82004 Food microbiologyMeat and meat products Detection and enumeration of Enterobacteriaceae without resuscitationMPN technique and colony-count technique AS 5013.102004 Food microbiologyMicrobiology of food and animal feeding stuffsHorizontal method for the detection of Salmonella spp. AS 5013.11.12004 Food microbiology- Microbiology of food and animal feeding stuffsPreparation of test samples, initial suspension and decimal dilutions for microbiological examination General rules for the preparation of the initial suspension and decimal dilutions AS 5013.11.22006 Food microbiologyMicrobiology of food and animal feeding stuffsPreparation of test samples, initial suspension and decimal dilutions for microbiological examination Specific rules for the preparation of meat and meat products AS 5013.11.32006 Food microbiologyMicrobiology of food and animal feeding stuffsPreparation of test samples, initial suspension and decimal dilutions for microbiological examination Specific rules for the preparation of fish and fishery products AS 5013.11.42006 Food microbiologyMicrobiology of food and animal feeding stuffsPreparation of test samples, initial suspension and decimal dilutions for microbiological examination Specific rules for the preparation of products other than milk and milk products, meat and meat products and fish and fishery products
372
SUBJECT INDEX
AS/NZS 4276.3.2:2003 Water microbiologyHeterotrophic colony count methodsPlate count of water containing biocides AS/NZS 4276.5:2007 Water microbiologyColiformsMembrane filtration method AS/NZS 4276.6:2007 Water microbiologyColiforms, Escherichia coli and thermotolerant coliformsDetermination of most probable number (MPN) AS/NZS 4276.7:2007 Water microbiologyEscherichia coli and thermotolerant coliformsMembrane filtration method AS 4276.81995 Water microbiologyFaecal streptococci Estimation of most probable number (MPN) AS/NZS 4276.9:2007 Water microbiologyEnterococciMembrane filtration method (ISO 7899-2:2000, MOD) AS 4276.101995 Water microbiologyPseudomonadsEstimation of most probable number (MPN) AS 4276.111995 Water microbiologyPseudomonadsMembrane filtration method AS 4276.121995 Water microbiologyPseudomonas aeruginosa Estimation of most probable number (MPN) AS/NZS 4276.13:2008 Water microbiologyPseudomonas aeruginosaMembrane filtration method AS 4276.141995 Water microbiologySalmonellae AS/NZS 4276.15:1999 Water microbiologyExamination for Vibrio cholerae AS/NZS 4276.16:1999 Water microbiologyMethod 16: Bactericidal efficiency of water disinfecting tablets AS/NZS 4276.17.1:2000 Water microbiologySpores of sulfitereducing anaerobes (clostridia) including Clostridium perfringensMembrane filtration method AS/NZS 4276.17.2:2000 Water microbiologySpores of sulfitereducing anaerobes (clostridia) including Clostridium perfringensEstimation of most probable number (MPN) using the multiple tube dilution technique AS/NZS 4276.18:2001 Water microbiologyAeromonas by membrane filtration including selected speciation AS/NZS 4276.19:2001 Water microbiologyExamination for thermophilic Campylobacter spp.Membrane filtration AS/NZS 4276.20:2003 Water microbiologyExamination for coagulase positive staphylococci, including Staphylococcus aureus, by membrane filtration AS 4276.212005 Water microbiologyExamination for coliforms and Escherichia coliDetermination of most probable number (MPN) using enzyme hydrolysable substrates AS/NZS 4276.22:2007 Water microbiologyPackaged water Coliform bacteria and Escherichia coliMembrane filtration method (ISO 9308-1:2000, MOD) AS 50592006 Power station cooling tower water systems Management of legionnaires disease health risk HB 32:1995 Control of microbial growth in air-handling and water systems of buildings MICROPROCESSOR SYSTEMS AS 1189.221987 Data processingVocabularyCalculators HB 261995 The computer anti-virus handbook MILK AND MILK PRODUCTS Butter AS 2300.7.11991 Methods of chemical and physical testing for the dairying industryButterGeneral information and preparation of samples AS 2300.7.21991 Methods of chemical and physical testing for the dairying industryButterDetermination of fat and curd AS 2300.7.31991 Methods of chemical and physical testing for the dairying industryButterDetermination of salt Cheese AS 2300.6.51990 Methods of chemical and physical testing for the dairying industryCheeseDetermination of salt AS 2300.6.81997 Methods of chemical and physical testing for the dairying industryCheeseDetermination of nitrate and nitrite in cheese by cadmium reduction and photometry Milk and milk products in general AS 2300.01995 Methods of chemical and physical testing for the dairying industryIntroduction and list of methods AS 2300.1.12008 Methods of chemical and physical testing for the dairying industryGeneral methods and principles Determination of total solids and moisture AS 2300.1.2.11991 Methods of chemical and physical testing for the dairying industryGeneral methods and principles Determination of nitrogenReference Kjeldahl method
MICROPROCESSOR SYSTEMS
AS 2300.1.2.22008 Methods of chemical and physical testing for the dairying industryGeneral methods and principles Determination of nitrogenNitrogen fractions from milk AS 2300.1.32008 Methods of chemical and physical testing for the dairying industryGeneral methods and principles Determination of fatGravimetric method AS 2300.1.4.11996 Methods of chemical and physical testing for the dairying industryGeneral methods and principles Determination of fat content of milks and liquid dairy products by the Babcock methodGlassware AS 2300.1.4.21988 Methods of chemical and physical testing for the dairying industryGeneral methods and principles Determination of fat content of milk and liquid dairy products by the Babcock methodMethodology AS 2300.1.52008 Methods of chemical and physical testing for the dairying industryGeneral methods and principles Determination of ash AS 2300.1.61989 Methods of chemical and physical testing for the dairying industryGeneral methods and principles Determination of pH AS 2300.1.71990 Methods of chemical and physical testing for the dairying industryGeneral methods and principles Determination of extraneous matter in dairy products AS 2300.1.7 Supplement 11990 Methods of chemical and physical testing for the dairying industryGeneral methods and principlesDetermination of extraneous matter in dairy products Reference print (Supplement to AS 2300.1.71990) AS 2300.1.82008 Methods of chemical and physical testing for the dairying industryGeneral methods and principlesAssessment of instrumental methodsProtein in milk and infrared spectrometric analysis of milk AS 2300.1.92008 Methods of chemical and physical testing for the dairying industryGeneral methods and principles Determination of sucrose and glucoseEnzymatic method AS 2300.1.102008 Methods of chemical and physical testing for the dairying industryGeneral methods and principles Determination of phosphatase activity AS 2300.2.11996 Methods of chemical and physical testing for the dairying industryLiquid milksMethod for determining the efficiency of homogenization of milk AS 2300.2.32008 Methods of chemical and physical testing for the dairying industryLiquid milksDetermination of the iodide content of milkSelective ion electrode method AS 2300.2.51997 Methods of chemical and physical testing for the dairing industryLiquid milksDetermination of the freezing point of milkThermistor method AS 2300.2.61988 Methods of chemical and physical testing for the dairying industryLiquid milksDetermination of lactose AS 2300.2.72008 Methods of chemical and physical testing for the dairying industryLiquid milksDetermination of calcium AS 2300.2.82008 Methods of chemical and physical testing for the dairying industryLiquid milksDetermination of chloride AS 2300.2.92008 Method of chemical and physical testing for dairying industryLiquid milksDetermination of phosphorus AS 2300.2.102008 Methods of chemical and physical testing for the dairying industryLiquid milksDetermination of titratable acidity AS 2300.2.111990 Methods of chemical and physical testing for the dairying industryLiquid milksDetermination of density and estimation of solids-not-fat (SNF)Hydrometer method AS 2300.4.11994 Methods of chemical and physical testing for the dairying industryDried milk and dried milk productsGeneral information and preparation of samples AS 2300.4.21994 Methods of chemical and physical testing for the dairying industryDried milk and dried milk productsSensory examination AS 2300.4.31994 Methods of chemical and physical testing for the dairying industryDried milk and dried milk products Determination of bulk density of dried milk AS 2300.4.41994 Methods of chemical and physical testing for the dairying industryDried milk and dried milk products Determination of insolubility index AS 2300.4.51994 Methods of chemical and physical testing for the dairying industryDried milk and dried milk products Determination of scorched particles and extraneous matter AS 2300.4.5 Supplement 11994 Methods of chemical and physical testing for the dairying industryDried milk and dried milk productsScorched particle standards for dry milks (Supplement to AS 2300.4.51994)
373
SUBJECT INDEX
AS 2300.10.51991 Methods of chemical and physical testing for the dairying industryCaseins, caseinates and coprecipitates Determination of particle-size distribution in caseins AS 2300.10.61991 Methods of chemical and physical testing for the dairying industryCaseins, caseinates and coprecipitates Determination of free acidity of caseins AS 2300.10.71991 Methods of chemical and physical testing for the dairying industryCaseins, caseinates and coprecipitates Determination of lactosePhotometric method Milk and processed milk products AS 11662004 Milk and milk productsGuidance on sampling MINING AND QUARRYING AS 3007 Set2007 Electrical installations for surface mines Set AS 3007.12004 Electrical installationsSurface mines and associated processing plantScope and definitions AS 3007.22004 Electrical installationsSurface mines and associated processing plantGeneral protection requirements AS 3007.32004 Electrical installationsSurface mines and associated processing plantGeneral requirements for equipment and ancillaries AS 3007.42004 Electrical installationsSurface mines and associated processing plantAdditional requirements for specific applications AS 3007.52004 Electrical installationsSurface mines and associated processing plantOperating requirements AS 3818.52003 TimberHeavy structural productsVisually gradedMine lift guides AS 4156.11994 Coal preparationHigher rank coalFloat and sink testing AS 4156.2.12004 Coal preparationHigher rank coalFroth flotationBasic test AS 4156.2.21998 Coal preparationHigher rank coalFroth flotation Sequential procedure AS 4156.32008 Coal preparationMagnetite for coal preparation plant use Test methods AS 4156.41999 Coal preparationFlowsheets and symbols AS 4156.62000 Coal preparationDetermination of dust/moisture relationship for coal AS 4156.71999 Coal preparationCoal size classifying equipment Performance evaluation AS 4156.82007 Coal preparationSample pre-treatmentDrop-shatter AS 43681996 Mine plansPreparation and symbols AS 4433.11997 Guide to the sampling of particulate materialsSampling procedures AS 4433.21997 Guide to the sampling of particulate materialsPreparation of samples AS 4433.32002 Guide to the sampling of particulate materialsEstimating sampling precision AS 4433.42001 Guide to the sampling of particulate materialsChecking for bias AS 4433.52005 Guide to the sampling of particulate materialsSampling of slurries AS 4433.62000 Guide to the sampling of particulate materialsInspection of mechanical sampling systems HB 2422007 High voltage mining equipment for use underground MINING EQUIPMENT AS 3785 Set2007 Underground miningShaft equipment Set AS 3785.12006 Underground miningShaft equipmentShaft overwind safety catch system Haulage and hoisting equipment AS 3637 Set2007 Underground miningWinding suspension equipment Set AS 3637.12005 Underground miningWinding suspension equipmentGeneral requirements AS 3637.22005 Underground miningWinding suspension equipmentDetaching hooks AS 3637.31997 Underground miningWinding suspension equipmentRope cappings AS 3637.42002 Underground miningWinding suspension equipmentDrawbars and connecting links AS 3637.52005 Underground miningWinding suspension equipmentRope swivels and swivel hooks AS 3637.62005 Underground miningWinding suspension equipmentShackles and chains AS 37512005 Underground miningSlope haulageCouplings, drawbars, and safety chains AS 3785 Set2007 Underground miningShaft equipment Set AS 3785.12006 Underground miningShaft equipmentShaft overwind safety catch system
AS 2300.4.61994 Methods of chemical and physical testing for the dairying industryDried milk and dried milk products Determination of dispersibility and wettability of instant dried milk AS 2300.4.71994 Methods of chemical and physical testing for the dairying industryDried milk and dried milk products Determination of the heat stability of skim milk powder AS 2300.4.81994 Methods of chemical and physical testing for the dairying industryDried milk and dried milk products Determination of undenatured whey protein nitrogen (UDWPN) in dried skim milk AS 2300.4.91994 Methods of chemical and physical testing for the dairying industryDried milk and dried milk products Determination of lactoseEnzymatic method AS 2300.4.101994 Methods of chemical and physical testing for the dairying industryDried milk and dried milk products Determination of lactoseTitrimetric method AS 2300.5.11991 Methods of chemical and physical testing for the dairying industryCondensed milkGeneral information and preparation of samples AS 2300.5.21991 Methods of chemical and physical testing for the dairying industryCondensed milkDetermination of sucrose Polarimetric method AS 2300.5.31991 Methods of chemical and physical testing for the dairying industryCondensed milkDetermination of total milk solids AS 2300.6.51990 Methods of chemical and physical testing for the dairying industryCheeseDetermination of salt AS 2300.6.81997 Methods of chemical and physical testing for the dairying industryCheeseDetermination of nitrate and nitrite in cheese by cadmium reduction and photometry AS 2300.7.11991 Methods of chemical and physical testing for the dairying industryButterGeneral information and preparation of samples AS 2300.7.21991 Methods of chemical and physical testing for the dairying industryButterDetermination of fat and curd AS 2300.7.31991 Methods of chemical and physical testing for the dairying industryButterDetermination of salt AS 2300.8.12004 Methods of chemical and physical testing for the dairying industryAnhydrous milk fatScope and general requirements AS 2300.8.22004 Methods of chemical and physical testing for the dairying industryAnhydrous milk fatDetermination of moistureKarl Fischer method AS 2300.8.42004 Methods of chemical and physical testing for the dairying industryAnhydrous milk fatDetermination of free fatty acid AS 2300.8.62004 Methods of chemical and physical testing for the dairying industryAnhydrous milk fatDetermination of peroxide value AS 2300.91990 Methods of chemical and physical testing for the dairying industryAnalysis of ice-cream and frozen milk products AS 2300.10.11991 Methods of chemical and physical testing for the dairying industryCaseins, caseinates and coprecipitates General information and preparation of samples AS 2300.10.21991 Methods of chemical and physical testing for the dairying industryCaseins, caseinates and coprecipitates Assessment of odour and flavour AS 2300.10.31991 Methods of chemical and physical testing for the dairying industryCaseins, caseinates and coprecipitates Assessment of colour of caseins AS 2300.10.3 Supplement 11991 Methods of chemical and physical testing for the dairying industryCaseins, caseinates and coprecipitatesAssesment of colour of caseinsColour standards for untreated and heat-treated acid casein and for wetheat-treated rennet casein (Supplement to AS 2300.10.31991) AS 2300.10.3 Supplement 21991 Methods of chemical and physical testing for the dairying industryCaseins, caseinates and coprecipitatesAssessment of colour of caseinsColour standards for untreated rennet casein (Supplement to AS 2300.10.31991) AS 2300.10.41991 Methods of chemical and physical testing for the dairying industryCaseins, caseinates and coprecipitates Determination of filterable material AS 2300.10.4 Supplement 11991 Methods of chemical and physical testing for the dairying industryCaseins, caseinates and coprecipitatesDetermination of filterable materialPhotographic reference standards (Supplement to AS 2300.10.41991)
374
SUBJECT INDEX
AS 3785.22006 Underground miningShaft equipmentShaft winding arresting systems AS 3785.32005 Underground miningShaft equipmentDrum winding gripper systems AS/NZS 3785.4:2002 Underground miningShaft equipment Conveyances for vertical shafts AS 3785.51998 Underground miningShaft equipment Headframes AS 3785.61992 Underground miningShaft equipmentGuides and rubbing ropes for conveyances AS 3785.72006 Underground miningShaft equipmentSheaves AS 3785.81994 Underground miningShaft equipmentPersonnel conveyances in other than vertical shafts Mining equipment in general AS/NZS 2802:2000 Electric cablesReeling and trailing for mining and general use (other than underground coal mining) AS/NZS 4240:1994 Remote controls for mining equipment AS 46062000 Fire resistant and antistatic requirements for conveyor belting used in underground coal mines HB 2422007 High voltage mining equipment for use underground Other mining equipment AS/NZS 3584 Set:2007 Diesel engine systems for underground coal mines Set AS/NZS 3584.1:2008 Diesel engine systems for underground coal minesFire protectedHeavy duty AS/NZS 3584.2:2008 Diesel engine systems for underground coal minesExplosion protected AS/NZS 3584.3:2005 Diesel engine systems for underground coal minesMaintenance AS 42971995 Underground miningStationary air compressors MISCELLANEOUS DOMESTIC AND COMMERCIAL EQUIPMENT AS 2401.11994 Battery chargers for lead-acid batteriesDomestic type Battery chargers for vented cells AS/NZS 2401.2:1995 Battery chargers for lead-acid batteriesDomestic typeBattery chargers for valve-regulated cells AS 2548.11998 Battery chargers for lead-acid traction batteriesBattery chargers for vented cells AS 26582008 LP GasPortable and mobile appliances AS 26582003 LP GasPortable and mobile appliances AS/NZS 3350.2.29:2001 Safety of household and similar electrical appliances- Particular requirements for battery chargers (IEC 60335-229:1994, MOD) AS/NZS 3350.2.41:1997 Safety of household and similar electrical appliancesParticular requirementsPumps AS/NZS 3350.2.55:1998 Safety of household and similar electrical appliancesParticular requirementsElectrical appliances for use with aquariums and garden ponds AS/NZS 3350.2.59:1999 Safety of household and similar electrical appliancesParticular requirementsInsect killers AS/NZS 3350.2.65:1997 Safety of household and similar electrical appliancesParticular requirementsAir-cleaning appliances AS/NZS 3350.2.82:2000 Safety of household and similar electrical appliancesParticular requirementsService machines and amusement machines (IEC 60335-2-82:1999, MOD) AS/NZS 3350.2.95:2000 Safety of household and similar electrical appliancesParticular requirementsDrives for vertically moving garage doors for residential use AS 35381988 TextilesMopsWet AS/NZS 4014.6:2007 Domestic solid fuel burning appliancesTest fuels Wood pellets AS/NZS 4253:1994 Mailboxes AS 45572004 Domestic outdoor gas barbecues AS 48432001 Synthetic weed blocking fabric AS/NZS 4867.1:2002 Cigarette lightersGeneral requirements AS/NZS 4867.2:2002 Cigarette lightersChild resistance requirements AS/NZS 60335.2.29:2004 Household and similar electrical appliances Safety- Particular requirements for battery chargers AS/NZS 60335.2.55:2004 Household and similar electrical appliances Safety- Particular requirements for electrical appliances for use with aquariums and garden ponds AS/NZS 60335.2.59:2005 Household and similar electrical appliances Safety- Particular requirements for insect killers (IEC 60335-2-59 Ed 3.0, MOD) AS/NZS 60335.2.65:2006 Household and similar electrical appliances SafetyParticular requirements for air-cleaning appliances (IEC 60335-265 Ed 3, IDT)
AS/NZS 60335.2.68:2003 Household and Similar Electrical Appliances Safety- Particular requirements for spray extraction appliances, for industrial and commercial use AS/NZS 60335.2.76:2003 Household and Similar Electrical Appliances Safety- Particular requirements for electric fence energizers AS/NZS 60335.2.82:2006 Household and Similar Electrical Appliances SafetyParticular requirements for amusement machines and personal service machines AS/NZS 60335.2.92:2003 Household and Similar Electrical Appliances Safety- Particular requirements for pedestrian-controlled mainsoperated lawn scarifiers and aerators MOBILE SERVICES Digital Enhanced Cordless Telecommunications (DECT) ACA TS 0281997 Radio Equipment and Systems Cordless TelecommunicationsDigital Enhanced Cordless Telecommunications (DECT) ACA TS 0341997 Radio Equipment and Systems Cordless TelecommunicationsPersonal Handy Phone System (PHS) Global System for Mobile Communication (GSM) AS/NZS 4346:1995 Guide to the installation in vehicles of mobile communication equipment intended for connection to a cellular mobile telecommunication service (CMTS) AS/NZS 4415.1:2003 Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands Technical characteristics and methods of measurement Shipborne equipment and limited coast stations (including DSC) (IEC 61097-7:1996, MOD) AS/NZS 4415.2:2003 Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands Technical characteristics and methods of measurementMajor coast stations, limited coast stations, ship stations and handheld stations (non DSC) (ETS 300 162:1998, MOD) AS/NZS 4582:2004 MF and HF radiocommunications equipment in the international maritime mobile radiotelephone service(ETS 300 337:1995, MOD) AS/NZS 4582:1999 MF and HF radiocommunications equipment in the international maritime mobile radiotelephone service AS/NZS 4770:2000 MF and HF radiocommunications equipment in the land mobile service utilizing single sideband suppressed carrier emission AS/NZS 61097.12:2008 Global maritime distress and safety system (GMDSS)Survival craft portable two-way VHF radiotelephone apparatusOperational and performance requirements, methods of testing and required test results (IEC 61097-12, Ed. 1.0 (1996) MOD) ACA TS 0051997 Analogue Cellular Mobile Telecommunications SystemAMPS Mobile Station ACA TS 0181997 Digital Cellular Mobile Telecommunications SystemGSM Mobile Station Paging systems AS/NZS 4769.1:2000 Radiocommunications equipment used in the paging serviceAngle modulated equipment AS/NZS 4769.2:2000 Radiocommunications equipment used in the paging serviceAmplitude modulated equipment Satellite AS 40801995 User terminals for accessing the mobilesat satellite communications system ACA TS 0191997 Radio Equipment and Systems Cordless TelecommunicationsCT2 CAI MONETARY SYSTEMS see FINANCES. BANKING. MONETARY SYSTEMS. INSURANCE NATURAL GAS AS 45642005 Specification for general purpose natural gas AS ISO 134432007 Natural gasStandard reference conditions AG 9011996 Code of practice for NGV refuelling stations (incorporates Amendments) NETWORKING AS 1189.251992 Data processingVocabularyLocal area networks AS 40281992 Information technologyCommunication interface connectors used in local area networks AS/NZS 4094:1993 Information technologyOpen Systems Interconnection Local area networksMedium access control service definition AS/NZS 4134:1995 Information technologyTelecommunications and information exchange between systemsNumbering and sub-addressing in private integrated services networks
375
SUBJECT INDEX
AS/NZS 4802.3:1999 Information processing systemsLocal area networks Carrier sense multiple access with collision detection access method and physical layer specifications AS 4802.41992 Information processing systemsLocal area networks Token-passing bus access method and physical layer specifications AS 4802.51992 Information processing systemsLocal area networks Token ring access method and physical layer specifications AS/NZS 4802.6:1996 Information processing systemsLocal area networks Distributed queue dual bus access method and physical layer specifications AS/NZS 4802.12:2000 Information technologyLocal area networks Demand-priority access method, physical layer and repeater specifications AS/NZS ISO/IEC 14763.3:2007 Telecommunications installations Implementation and operation of customer premises cablingTesting of optical fibre cabling NOISE WITH RESPECT TO HUMAN BEINGS AS ISO 389.12007 AcousticsReference zero for the calibration of audiometric equipmentReference equivalent threshold sound pressure levels for pure tones and supra-aural earphones AS ISO 389.22007 AcousticsReference zero for the calibration of audiometric equipmentReference equivalent threshold sound pressure levels for pure tones and insert earphones AS ISO 389.32007 AcousticsReference zero for the calibration of audiometric equipmentReference equivalent threshold force levels for pure tones and bone vibrators AS ISO 389.52003 AcousticsReference zero for the calibration of audiometric equipmentReference equivalent threshold sound pressure levels for pure tones in frequency range 8 kHz to 16 kHz AS ISO 389.72003 AcousticsReference zero for the calibration of audiometric equipmentReference threshold of hearing under free-field and diffuse-field listening conditions AS/NZS 1269 Set:2005 Occupational Noise Management Set AS/NZS 1269.0:2005 Occupational noise managementOverview and general requirements AS/NZS 1269.0:1998 Occupational noise managementOverview AS/NZS 1269.1:2005 Occupational noise managementMeasurement and assessment of noise immission and exposure AS/NZS 1269.1:1998 Occupational noise managementMeasurement and assessment of noise immission and exposure AS/NZS 1269.2:2005 Occupational noise managementNoise control management AS/NZS 1269.2:1998 Occupational noise managementNoise control management AS/NZS 1269.3:2005 Occupational noise managementHearing protector program AS/NZS 1269.3:1998 Occupational noise managementHearing protector program AS/NZS 1269.4:2005 Occupational noise managementAuditory assessment AS/NZS 1269.4:1998 Occupational noise managementAuditory assessment AS/NZS 1591.1:1995 AcousticsInstrumentation for audiometryReference zero for the calibration of pure-tone bone conduction audiometers AS/NZS 1591.4:1995 AcousticsInstrumentation for audiometryA mechanical coupler for calibration of bone vibrators AS ISO 19992003 AcousticsDetermination of occupational noise exposure and estimation of noise-induced hearing impairment AS 22541988 AcousticsRecommended noise levels for various areas of occupancy in vessels and offshore mobile platforms AS/NZS 2399:1998 AcousticsSpecifications for personal sound exposure meters AS 3657.21996 AcousticsExpression of the subjective magnitude of sound or noiseMethod for calculating loudness level AS ISO 70292003 AcousticsStatistical distribution of hearing thresholds as a function of age AS IEC 60645.12002 ElectroacousticsAudiological equipmentPure-tone audiometers (IEC 60645-1:2001, MOD) AS IEC 60645.22002 ElectroacousticsAudiological equipmentEquipment for speech audiometry AS IEC 60645.32002 ElectroacousticsAudiological equipmentAuditory test signals of short duration for audiometric and neuro-otological purposes AS IEC 60645.42002 ElectroacousticsAudiological equipmentEquipment for extended high-frequency audiometry NON-DESTRUCTIVE TESTING AS 19291981 Non-destructive testingGlossary of terms
AS/NZS 4135:1995 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkCircuit-mode 64 kbit/s bearer servicesService description, functional capabilities and information flows AS/NZS 4136.1:1995 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkReference configuration for PISN exchanges (PINX) AS/NZS 4138:1995 Information technologyTelecommunications and information exchange between systemsSynchronization methods and technical requirements for private integrated services networks AS/NZS 4147:1993 Information technologyTelecommunications and information exchange between systemsThe structure and coding of logical link control addresses in local area networks AS/NZS 4166:1994 Information processing systemsData communications Use of the X.25 packet level protocol in local area networks AS/NZS 4238:1996 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkCircuit-mode multi-rate bearer servicesService description, functional capabilities and information flows AS/NZS 4239:1996 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkGeneric functional protocol for the support of supplementary servicesInter-exchange signalling procedures and protocol AS/NZS 4328:1997 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolPath replacement additional network feature AS/NZS 4329:1997 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolName identification supplementary services AS/NZS 4335:1997 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsPath replacement additional network feature AS/NZS 4336:1997 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsName identification supplementary services AS/NZS 4337:1997 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsCall transfer supplementary service AS/NZS 4338:1997 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsCall completion supplementary services AS/NZS 4339:1997 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolCall transfer supplementary service AS/NZS 4340:1997 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolCall completion supplementary services AS/NZS 4341:1997 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsCall diversion supplementary services AS/NZS 4342:1997 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolCall diversion supplementary services AS/NZS 4477:1997 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsIdentification supplementary services AS/NZS 4802.1:1996 Information processing systemsLocal area networks Overview of local area network standards AS/NZS 4802.1 Supplement 1:1994 Information processing systemsLocal area networksOverview of local area network StandardsMedia access control bridges (Supplement to AS/NZS 4802.1:1996) AS/NZS 4802.1 Supplement 2:1997 Information processing systemsLocal area networksOverview of local area network standardsSystem load protocol (Supplement to AS/NZS 4802.1:1996) AS/NZS 4802.1 Supplement 3:1997 Information processing systemsLocal area networksOverview of local area network standardsLAN/MAN management (Supplement to AS/NZS 4802.1:1996) AS/NZS 4802.2:1999 Information processing systemsLocal area networks Logical link control
376
SUBJECT INDEX
AS 20621997 Non-destructive testingPenetrant testing of products and components AS 2452.12004 Non-destructive testingDetermination of thickness Determination of wall thickness of pipe by the use of radiography AS 2452.32005 Non-destructive testingDetermination of thicknessUse of ultrasonic testing AS 36692006 Non-destructive testingQualification and approval of personnelAerospace AS 39982006 Non-destructive testingQualification and certification of personnel AS 46352004 Non-destructive testingQualification of personnel for limited applications of non-destructive testing AS 47492007 Non-destructive testingTerminology of and abbreviations for fusion weld imperfections as revealed by radiography NON-FERROUS METALS Aluminium and aluminium alloys AS 12312000 Aluminium and aluminium alloysAnodic oxidation coatings AS 26121997 Aluminium and aluminium alloysSampling for chemical and spectrochemical analysis AS 3719.11989 Aluminium and aluminium alloysDetermination of ironSpectrophotometric method AS 3719.21998 Aluminium and aluminium alloysDetermination of siliconGravimetric method AS 48612004 Aluminium and aluminium alloysDetermination of impurities and alloying elementsAtomic emission spectrometric method ASCRM 0252003 Certified reference materialAlumina ASCRM 0262003 Certified reference materialAlumina TR 2.252003 Certified reference materialsAluminaPreparation and certification of ASCRM 025 TR 2.262003 Certified reference materialsAluminaPreparation and certification of ASCRM 026 Copper and copper alloys AS 1515.11994 Copper alloysDetermination of lead in copper alloys (flame atomic absorption spectrometric method) AS 1515.21994 Copper alloysDetermination of manganese contentFlame atomic absorption spectrometric method AS 1515.31989 Copper alloysDetermination of silver content Flame atomic absorption spectrometric method AS 1515.41978 Copper alloysMethod for the electrolytic determination of copper in wrought and cast copper alloys AS 1515.51987 Copper alloysDetermination of cadmiumFlame atomic absorption spectrometric method AS 1696.11987 CopperDetermination of phosphorus Spectrophotometric method AS 1696.21997 CopperDetermination of copper content Electrogravimetric method AS 21361977 Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test AS 23452006 Dezincification resistance of copper alloys AS 26141998 Copper and copper alloysSampling for chemical and spectrochemical analysis, and physical testing AS 35172007 Capillary fittings of copper and copper alloy for nonpressure sanitary plumbing applications Lead, zinc, tin and their alloys AS 1329.11994 Methods for the analysis of zinc and zinc alloys Determination of aluminium contentTitrimetric method AS 1329.21994 Methods for the analysis of zinc and zinc alloys Determination of magnesium contentFlame atomic absorption spectrometric method AS 1329.31994 Methods for the analysis of zinc and zinc alloys Determination of aluminium contentFlame atomic absorption spectrometric method AS 1329.51994 Methods for the analysis of zinc and zinc alloys Determination of copper content (0.0001% to 0.0025%)Flame atomic absorption spectrometric method AS 1329.61994 Methods for the analysis of zinc and zinc alloys Determination of copper content (0.25% to 1.25%)Flame atomic absorption spectrometric method AS 1329.71994 Methods for the analysis of zinc and zinc alloys Determination of lead contentFlame atomic absorption spectrometric method AS 1329.81994 Methods for the analysis of zinc and zinc alloys Determination of cadmium contentFlame atomic absorption spectrometric method
NON-FERROUS METALS
AS 1671.11987 Lead and lead alloysDetermination of antimony contentFlame atomic absorption spectrometric method AS 1671.21987 Lead and lead alloysDetermination of low concentrations of antimony in lead alloys containing not more than 2.5% arsenic and 0.10% copperTitrimetric method AS 1671.31987 Lead and lead alloysDetermination of high concentrations of antimony in lead alloys containing not more than 2.5% arsenic and 1% copperTitrimetric method AS 1671.41988 Lead and lead alloysDetermination of tin in antimonial leadFlame atomic absorption spectrometric method AS 23471998 Zinc and zinc alloysSampling for chemical and spectrochemical analysis AS 25341997 Lead and lead alloysSampling for chemical and spectrochemical analysis AS 46992000 Zinc and zinc alloysDetermination of impurities and alloying elementsAtomic emission spectrometric method AS 48622000 Lead and lead alloysDetermination of impurities and alloying elementsAtomic emission spectrometric method Non-ferrous metals in general HB 121996 Metals Index HB 171996 Metals and alloysStandard terminology and nomenclature HB 110.11998 IMMA Handbook of Engineering MaterialsVolume 1: Metals Other non-ferrous metals and their alloys AS 3515.12005 Gold and gold bearing alloysDetermination of gold content (less than 30%)Gravimetric (fire assay) method AS 3515.22002 Gold and gold bearing alloysDetermination of gold content 30% to 99.5%Gravimetric (fire assay) method AS 3515.32002 Gold and gold bearing alloysDetermination of gold content (greater than 99.5%)Gravimetric (fire assay) method AS 3515.42007 Gold and gold bearing alloysDetermination of gold content (greater than 99.95%)Inductively coupled plasmaAtomic emission spectrometry AS 41192007 Determination of platinum and palladium in gold and gold bearing alloysFlame atomic absorption spectrometry (FAAS) or inductively coupled plasma-atomic emission spectrometry (ICP-AES) (fire assay methods) AS 5006.12002 Silver and silver bearing alloysDetermination of silver content (0.1% to 99.9%)Tritrimetric (potentiometric) method AS 5006.22002 Silver and silver bearing alloysDetermination of silver content (1% to 99%)Gravimetric (fire assay) method NON-TEXTILE FLOOR COVERINGS AS 18841985 Floor coveringsResilient sheet and tilesLaying and maintenance practices AS 4693.22004 Surfaces for sports areasMethods of testDetermination of thickness of synthetic sports surfaces AS 4693.32004 Surfaces for sports areasMethods of testDetermination of joint strength of synthetic surfaces AS 4693.42004 Surfaces for sports areasMethods of testDetermination of tensile properties of synthetic sports surfaces AS ISO 9239.12003 Reaction to fire tests for floor coveringsDetermination of the burning behaviour using a radiant heat source OCCUPATIONAL SAFETY. INDUSTRIAL HYGIENE AS/NZS 1269 Set:2005 Occupational Noise Management Set AS/NZS 1269.0:2005 Occupational noise managementOverview and general requirements AS/NZS 1269.0:1998 Occupational noise managementOverview AS/NZS 1269.1:2005 Occupational noise managementMeasurement and assessment of noise immission and exposure AS/NZS 1269.1:1998 Occupational noise managementMeasurement and assessment of noise immission and exposure AS/NZS 1269.2:2005 Occupational noise managementNoise control management AS/NZS 1269.2:1998 Occupational noise managementNoise control management AS/NZS 1269.3:2005 Occupational noise managementHearing protector program AS/NZS 1269.3:1998 Occupational noise managementHearing protector program AS/NZS 1269.4:2005 Occupational noise managementAuditory assessment AS/NZS 1269.4:1998 Occupational noise managementAuditory assessment
377
SUBJECT INDEX
AS 2430.11987 Classification of hazardous areasExplosive gas atmospheres AS 2430.31991 Classification of hazardous areasSpecific occupancies AS/NZS 2430.3.1:2004 Classification of hazardous areasExamples of area classificationGeneral AS/NZS 2430.3.2:2004 Classification of hazardous areasExamples of area classificationVehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangars AS/NZS 2430.3.3:2004 Classification of hazardous areasExamples of area classificationFlammable liquids AS/NZS 2430.3.4:2004 Classification of hazardous areasExamples of area classificationFlammable gases AS/NZS 2430.3.5:2004 Classification of hazardous areasExamples of area classificationRefineries and major processing plants AS/NZS 2430.3.6:2004 Classification of hazardous areasExamples of area classificationLaboratories, including fume cupboards and flammable medical agents AS/NZS 2430.3.7:2004 Classification of hazardous areasExamples of area classificationLandfill gas, sewage treatment and sewage pumping plants AS/NZS 2430.3.8:2004 Classification of hazardous areasExamples of area classificationSurface coatings and adhesives AS/NZS 2430.3.9:2004 Classification of hazardous areasExamples of area classificationMiscellaneous AS 25672002 Laminar flow cytotoxic drug safety cabinets AS 27462008 Working areas for gas-fuelled vehicles AS 2815.12008 Training and certification of occupational divers Occupational SCUBA diverStandard AS/NZS 2865 Set:2005 Safe working in a confined space Set AS/NZS 2865:2001 Safe working in a confined space AS 28651995 Safe working in a confined space AS 29812008 High voltage a.c. switchgear and controlgearVacuum interruptersHigh voltage testingProtection of personnel from x-ray emission AS/NZS 3576:1998 Clearing saws, brushcutters and grass trimmersGuide to safe working practices AS 35811988 Mechanical aids for patient lifting and movingSafety requirements AS/NZS 3661.1:1993 Slip resistance of pedestrian surfacesRequirements AS/NZS 3661.2:1994 Slip resistance of pedestrian surfacesGuide to the reduction of slip hazards AS 37541990 Safe application of powder coatings by electrostatic spraying AS 3848.11999 Filling of portable gas cylindersDecant filling of medical air and oxygen into portable cylindersSafe procedures AS 3848.21999 Filling of portable gas cylindersFilling of portable cylinders for self-contained underwater breathing apparatus (SCUBA) and nonunderwater self-contained breathing apparatus (SCBA)Safe procedures AS 4024.12006 Series Safety of machinery AS 4024.11012006 Safety of machineryTerminologyTerms and definitions AS 4024.12012006 Safety of machineryGeneral principlesBasic terminology and methodology AS 4024.12022006 Safety of machineryGeneral principlesTechnical principles AS 4024.13012006 Safety of machineryRisk assessmentPrinciples of risk assessment AS 4024.13022006 Safety of machineryRisk assessmentReduction of risks to health and safety from hazardous substances emitted by machineryPrinciples and specifications for machinery manufacturers AS 4024.14012006 Safety of machineryErgonomic principlesDesign principlesTerminology and general principles AS 4024.15012006 Safety of machineryDesign of safety related parts of control systemsGeneral principles for design AS 4024.15022006 Safety of machineryDesign of safety related parts of control systemsValidation AS 4024.16012006 Safety of machineryDesign of controls, interlocks and guardingGuardsGeneral requirements for the design and construction of fixed and movable guards AS 4024.16022006 Safety of machineryInterlocking devices associated with guardsPrinciples for design and selection AS 4024.16032006 Safety of machineryDesign of controls, interlocks and guardsPrevention of unexpected start-up AS 4024.16042006 Safety of machineryDesign of controls, interlocks and guardingEmergency stopPrinciples for design AS 4024.17012006 Safety of machineryHuman body measurements Basic human body measurements for technological design
AS 13181985 Use of colour for the marking of physical hazards and the identification of certain equipment in industry (known as the SAA Industrial Safety Colour Code) (incorporating Amdt 1) AS 13191994 Safety signs for the occupational environment AS 14701986 Health and safety at workPrinciples and practices AS 16571992 Fixed platforms, walkways, stairways and laddersDesign, construction and installation AS 1885.11990 Measurement of occupational health and safety performanceDescribing and reporting occupational injuries and disease (known as the National Standard for workplace injury and disease recording) AS 1885.1 Supplement 11991 Measurement of occupational health and safety performanceDescribing and reporting occupational injuries and diseaseWorkplace injury and disease recording form (Supplement to AS 1885.11990) AS/NZS 2161 Set:2008 Occupational protective gloves Set AS/NZS 2161.1:2000 Occupational protective glovesSelection, use and maintenance AS/NZS 2161.2:2005 Occupational protective glovesGeneral requirements AS/NZS 2161.3:2005 Occupational protective glovesProtection against mechanical risks AS/NZS 2161.4:1999 Occupational protective glovesProtection against thermal risks (heat and fire) AS/NZS 2161.5:1998 Occupational protective glovesProtection against cold AS 2161.62003 Occupational protective glovesProtective gloves for firefightersLaboratory test methods and performance requirements AS/NZS 2161.7.1:1998 Occupational protective glovesProtection against cuts and stabs by hand knivesChainmail gloves and arm guards AS/NZS 2161.7.2:2005 Occupational protective glovesProtection against cuts and stabs by hand knivesGloves and arm guards made of material other than chainmail AS/NZS 2161.7.3:2005 Occupational protective glovesProtection against cuts and stabs by hand knivesImpact cut test for fabric, leather and other materials AS/NZS 2161.8:2002 Occupational protective glovesProtection against ionizing radiation and radioactive contamination AS/NZS 2161.9:2002 Occupational protective glovesMethod of measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand AS/NZS 2161.10.1:2005 Occupational protective glovesProtective gloves against chemicals and micro-organismsTerminology and performance requirements AS/NZS 2161.10.2:2005 Occupational protective glovesProtective gloves against chemicals and micro-organismsDetermination of resistance to penetration AS/NZS 2161.10.3:2005 Occupational protective glovesProtective gloves against chemicals and micro-organismsDetermination of resistance to permeation by chemicals AS/NZS 2211.1:2004 Safety of laser productsEquipment classification, requirements and users guide (IEC 60825-1:2001, MOD) AS/NZS 2211.5:2006 Safety of laser productsManufacturers checklist for AS/NZS2211.1 AS/NZS 2211.12:2006 Safety of laser productsSafety of free space optical communication systems used for transmission of information AS 2252.22004 Biological safety cabinetsLaminar flow biological safety cabinets (Class II) for personnel, environment and product protection AS 22841979 Safe working with elastomeric hose and hose assemblies for steam-cleaning machines AS 2294.11997 Earth-moving machineryProtective structuresGeneral AS 2294.1 Supplement 12003 Earth-moving machineryProtective structuresGeneralOperator protective structures fitted to plant used in timber industry (forest operations) (Supplement to AS 2294.11997) AS/NZS 2299.1:2007 Occupational diving operationsStandard operational practice AS/NZS 2299.1 Supplement 1:2007 Occupational diving operations Standard operational practice Supplement 1: AS/NZS 2299 diving medical examination forms (Supplement to AS/NZS 2299.1:2007) AS/NZS 2299.2:2002 Occupational diving operationsScientific diving AS/NZS 2299.3:2003 Occupational diving operationsRecreational industry diving and snorkelling operations AS/NZS 2299.4:2005 Occupational diving operationsFilm and photographic diving AS 23361992 Meat industryHand-held knives AS/NZS 2381.1:2005 Electrical equipment for explosive gas atmospheres Selection, installation and maintenanceGeneral requirements AS 23971993 Safe use of lasers in the building and construction industry
378
SUBJECT INDEX
AS 4024.17022006 Safety of machineryHuman body measurements Principles for determining the dimensions required for openings for whole body access into machinery AS 4024.17032006 Safety of machineryPrinciples for determining the dimensions required for access openings AS 4024.17042006 Safety of machineryHuman body measurements Anthropometric data AS 4024.18012006 Safety of machinerySafety distances to prevent danger zones being reached by the upper limbs AS 4024.18022006 Safety of machinerySafety distances and safety gapsSafety distances to prevent danger zones being reached by the lower limbs AS 4024.18032006 Safety of machinerySafety distances and safety gapsMinimum gaps to prevent crushing of parts of the human body AS 4024.19012006 Safety of machineryDisplays, controls, actuators and signalsErgonomic requirements for the design of displays and control actuatorsGeneral principles for human interactions with displays and control actuators AS 4024.19022006 Safety of machineryDisplays, controls, actuators and signalsErgonomic requirements for the design of displays and control actuatorsDisplays AS 4024.19032006 Safety of machineryDisplays, controls, actuators and signalsErgonomic requirements for the design of displays and control actuatorsControl actuators AS 4024.19042006 Safety of machineryDisplays, controls, actuators and signalsIndication, marking and actuationRequirements for visual, auditory and tactile signals AS 4024.19052006 Safety of machineryDisplays, controls, actuators and signalsIndication, marking and actuationRequirements for marking AS/NZS 4173:2004 Guide to the safe use of lasers in health care AS/NZS 4261:1994 Reusable containers for the collection of sharp items used in human and animal medical applications AS 43432005 Pressure equipmentHazard levels AS 4361.11995 Guide to lead paint managementIndustrial applications AS 4361.21998 Guide to lead paint managementResidential and commercial buildings AS/NZS 4431:1996 Guidelines for safe working on new lift installations in new constructions AS/NZS 4478:1997 Guide to the reprocessing of reusable containers for the collection of sharp items used in human and animal clinical/medical applications AS/NZS 4488.1:1997 Industrial rope access systemsSpecifications AS/NZS 4488.2:1997 Industrial rope access systemsSelection, use and maintenance AS/NZS 4543.1:1999 Protective devices against diagnostic medical XradiationDetermination of attenuation properties of materials AS/NZS 4543.2:1999 Protective devices against diagnostic medical XradiationProtective glass plates AS/NZS 4586:2004 Slip resistance classification of new pedestrian surface materials AS/NZS 4663:2004 Slip resistance measurement of existing pedestrian surfaces AS 4774.12003 Work in compressed air and hyperbaric facilitiesWork in tunnels, shafts and caissons AS/NZS 4801:2001 Occupational health and safety management systems Specification with guidance for use AS/NZS 4804:2001 Occupational health and safety management systems General guidelines on principles, systems and supporting techniques AS 48112006 Employment screening AS/NZS 4836:2001 Safe working on low-voltage electrical installations AS 48392001 The safe use of portable and mobile oxy-fuel gas systems for welding, cutting, heating and allied processes AS/NZS 4994.1(Int):2004 Temporary roof edge protection for housing and residential buildingsGeneral requirements AS/NZS 4994.2(Int):2004 Temporary roof edge protection for housing and residential buildingsInstallation and dismantling AS 56052007 Guide to the safe use of preservative-treated timber AS 5605 Supplement 12007 Guide to the safe use of preservative-treated timberConsumer safety information sheetCopper chromium arsenic(CCA)-treated timber AS 5605 Supplement 22007 Guide to the safe use of preservative-treated timberConsumer Safety Information SheetAlkaline copper quaternary(ACQ)-treated timber AS 5605 Supplement 32007 Guide to the safe use of preservative-treated timberConsumer Safety Information SheetCopper azole-treated timber
OFFICE MACHINES
AS 5605 Supplement 42007 Guide to the safe use of preservative-treated timberConsumer Safety Information Sheet Light oil/organic solventborne preservative (LOSP)-treated timber AS 5605 Supplement 52007 Guide to the safe use of preservative-treated timberConsumer Safety Information SheetCreosote or pigmentemulsified creosote (PEC)-treated timber AS 5605 Supplement 62007 Guide to the safe use of preservative-treated timberConsumer Safety Information SheetBifenthrin-treated timber AS/NZS ISO 11553:2004 Safety of machineryLaser processing machines Safety requirements AS/NZS 60079.10:2004 Electrical apparatus for explosive gas atmospheresClassification of hazardous areas (IEC 60079-10:2002 MOD) CD 012 OH&S in Construction CD-ROM HB 91994 Occupational personal protection HB 132007 Electrical equipment for hazardous areas HB 941997 Electrical safety in the workplace HB 197:1999 An introductory guide to the slip resistance of pedestrian surface materials HB 205 (Set)2004 OHS Risk Management Set HB 2052004 OHS Risk Management Handbook HB 2112001 Occupational health and safety management systemsA guide to AS 4801 for small business HB 213:2003 Guidelines for safe working in a confined space HB 295.3.142008 Product Safety FrameworkMelting and dissolving of materialsDishwasher safety HB 295.3.142007 Product Safety FrameworkMelting and dissolving of materialsDishwasher safety HB 295.3.152008 Product Safety FrameworkMelting and dissolving of materialsMicrowave oven resistance HB 295.3.152007 Product Safety FrameworkMelting and dissolving of materialsMicrowave oven resistance HB 295.3.162008 Product Safety FrameworkMelting and dissolving of materialsWashing by hand HB 295.3.162007 Product Safety FrameworkMelting and dissolving of materialsWashing by hand HB 323 Set2007 Employment Screening Set MP 581991 Workplace injury and disease recording standardResource kit ISO 9001 COMPANION SET2008 ISO 9001 Companion Set OFFICE MACHINES AS 3590.31990 Screen-based workstationsInput devices AS 37551990 AcousticsMeasurement of airborne noise emitted by computer and business equipment AS 37561990 AcousticsMeasurement of high-frequency noise emitted by computer and business equipment AS 37571990 AcousticsDeclared noise emission values of computers and business equipment AS/NZS 60950.1:2003 Information technology equipmentSafetyGeneral requirements OPEN SYSTEMS INTERCONNECTION (OSI) Application layer AS/NZS 3646.1:1993 Information processing systemsOpen Systems InterconnectionFile transfer, access and management General introduction AS/NZS 3646.1 Supplement 1:1995 Information processing systemsOpen Systems InterconnectionFile transfer, access and managementGeneral introductionOverlapped access (Supplement to AS/NZS 3646.1:1993) AS/NZS 3646.2:1993 Information processing systemsOpen Systems InterconnectionFile transfer, access and management Virtual filestore definition AS/NZS 3646.2 Supplement 1:1995 Information processing systemsOpen Systems InterconnectionFile transfer, access and managementVirtual filestore definitionOverlapped access (Supplement to AS/NZS 3646.2:1993) AS/NZS 3646.3:1993 Information processing systemsOpen Systems InterconnectionFile transfer, access and management File service definition AS/NZS 3646.3 Supplement 1:1995 Information processing systemsOpen Systems InterconnectionFile transfer, access and managementFile service definitionOverlapped access (Supplement to AS/NZS 3646.3:1993) AS/NZS 3646.4:1993 Information processing systemsOpen Systems InterconnectionFile transfer, access and management File protocol specification
379
SUBJECT INDEX
AS/NZS 4105 Supplement 1:1995 Information technologyOpen Systems InterconnectionProtocol specification for the commitment, concurrency and recovery service elementSession mapping changes (Supplement to AS/NZS 4105:1993) AS/NZS 4106:1993 Information technologyOpen Systems InterconnectionService definition for the commitment, concurrency and recovery service element AS/NZS 4150.1:1993 Information technologyOpen Systems InterconnectionConformance test suite for the ACSE protocolTest suite structure and test purposes AS/NZS 4151.1:1994 Information technologyOpen Systems InterconnectionStructure of management informationManagement information model AS/NZS 4151.2:1993 Information technologyOpen Systems InterconnectionStructure of management informationDefinition of management information AS/NZS 4151.4:1993 Information technologyOpen Systems InterconnectionStructure of management informationGuidelines for the definition of managed objects AS/NZS 4152.1:1994 Information technologyOpen Systems InterconnectionSystems managementObject management function AS/NZS 4152.2:1994 Information technologyOpen Systems InterconnectionSystems managementState management function AS/NZS 4152.3:1994 Information technologyOpen Systems InterconnectionSystems managementAttributes for representing relationships AS/NZS 4152.4:1994 Information technologyOpen Systems InterconnectionSystems managementAlarm reporting function AS/NZS 4152.5:1994 Information technologyOpen Systems InterconnectionSystems managementEvent report management function AS/NZS 4152.6:1994 Information technologyOpen Systems InterconnectionSystems managementLog control function AS/NZS 4152.7:1993 Information technologyOpen Systems InterconnectionSystems managementSecurity alarm reporting function AS/NZS 4152.8:1994 Information technologyOpen Systems InterconnectionSystems managementSecurity audit trail function AS/NZS 4153.2:1994 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authoritiesRegistration procedures for OSI document types AS/NZS 4153.4:1993 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authoritiesRegister of VTE profiles AS/NZS 4153.5:1993 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authoritiesRegister of VT control object definitions AS/NZS 4218.1:1994 Information technologyOpen Systems InterconnectionConformance test suite for the FTAM protocolTest suite structure and test purposes AS 4700.12006 Implementation of Health Level Seven (HL7) Version 2.5Patient administration AS 4700.12005 Implementation of Health Level Seven (HL7) Version 2.4Patient administration AS 4700.12001 Implementation of Health Level Seven (HL7) Version 2.3.1.Patient administration AS 4700.11998 Implementation of Health Level Seven (HL7) Version 2.3Patient administration AS 4700.11997 Implementation of Health Level Seven (HL7) Version 2.2Admission, discharge and transfer AS 4700.22007 Implementation of Health Level Seven (HL7) Version 2.4Pathology and medical imaging (diagnostics) AS 4700.22004 Implementation of Health Level Seven (HL7) Version 2.3.1Pathology orders and results AS 4700.21998 Implementation of Health Level Seven (HL7) Version 2.3Pathology orders and results AS 4700.3(Int)2007 Implementation of Health Level Seven (HL7) Version 2.5Electronic messages for exchange of information on drug prescription AS 4700.32005 Implementation of Health Level Seven (HL7) Version 2.4Electronic messages for exchange of information on drug prescription AS/NZS 4700.3:2002 Implementation of Health Level Seven (HL7) Version 2.3.1Electronic messages for exchange of information on drug prescription AS/NZS 4700.3:1999 Implementation of Health Level Seven (HL7) Version 2.3Electronic messages for exchange of information on drug prescription
AS/NZS 3646.4 Supplement 1:1995 Information processing systemsOpen Systems InterconnectionFile transfer, access and managementFile protocol specificationOverlapped access (Supplement to AS/NZS 3646.4:1993) AS/NZS 3646.5:1994 Information processing systemsOpen Systems InterconnectionFile transfer, access and management Protocol implementation conformance statement proforma AS/NZS 3697:1994 Information technologyOpen Systems InterconnectionJob transfer and manipulation concepts and services AS/NZS 3698:1994 Information technologyOpen Systems InterconnectionSpecification of the basic class and full protocol for job transfer and manipulation AS 3964.11992 Information technologyOpen Systems InterconnectionCommon management information protocol Specification AS/NZS 3964.2:1994 Information technologyOpen Systems InterconnectionCommon management information protocol Protocol implementation conformance statement proforma AS 39651991 Information technologyOpen Systems InterconnectionCommon management information service definition AS 3965 Supplement 11995 Information technologyOpen Systems InterconnectionCommon management information service definitionAccess control (Supplement to AS 39651991) AS 40171992 Information technologyOpen Systems InterconnectionVirtual terminal basic class service AS 4017 Supplement 11995 Information technologyOpen Systems InterconnectionVirtual terminal basic class service Additional functional units (Supplement to AS 40171992) AS 4018.11992 Information technologyOpen Systems InterconnectionVirtual terminal basic class protocolSpecification AS 4018.1 Supplement 11995 Information technologyOpen Systems InterconnectionVirtual terminal basic class protocol SpecificationAdditional functional units (Supplement to AS 4018.11992) AS/NZS 4019.1:1996 Information technologyOpen Systems InterconnectionThe DirectoryOverview of concepts, models and services AS 4019.11992 Information technologyOpen Systems InterconnectionThe DirectoryOverview of concepts, models and services AS/NZS 4019.2:1996 Information technologyOpen Systems InterconnectionThe DirectoryModels AS 4019.21992 Information technologyOpen Systems InterconnectionThe DirectoryModels AS/NZS 4019.3:1996 Information technologyOpen Systems InterconnectionThe DirectoryAbstract service definition AS 4019.31992 Information technologyOpen Systems InterconnectionThe DirectoryAbstract service definition AS/NZS 4019.4:1996 Information technologyOpen Systems InterconnectionThe DirectoryProcedures for distributed operation AS 4019.41992 Information technologyOpen Systems InterconnectionThe DirectoryProcedures for distributed operation AS/NZS 4019.5:1996 Information technologyOpen Systems InterconnectionThe DirectoryProtocol specifications AS 4019.51992 Information technologyOpen Systems InterconnectionThe DirectoryProtocol specifications AS/NZS 4019.6:1996 Information technologyOpen Systems InterconnectionThe DirectorySelected attribute types AS 4019.61992 Information technologyOpen Systems InterconnectionThe DirectorySelected attribute types AS/NZS 4019.7:1996 Information technologyOpen Systems InterconnectionThe DirectorySelected object classes AS 4019.71992 Information technologyOpen Systems InterconnectionThe DirectorySelected object classes AS/NZS 4019.8:1996 Information technologyOpen Systems InterconnectionThe DirectoryAuthentication framework AS 4019.81992 Information technologyOpen Systems InterconnectionThe DirectoryAuthentication framework AS/NZS 4019.9:1996 Information technologyOpen Systems InterconnectionThe DirectoryReplication AS 40211992 Information technologyOpen Systems InterconnectionApplication layer structure AS/NZS 4105:1993 Information technologyOpen Systems InterconnectionProtocol specification for the commitment, concurrency and recovery service element
380
SUBJECT INDEX
AS 4700.5(Int)2007 Implementation of Health Level Seven (HL7) Version 2.5Immunization messages AS 4700.52005 Implementation of Health Level Seven (HL7) Version 2.4Immunization messages AS 4700.52002 Implementation of Health Level Seven (HL7) Version 2.3.1Immunization Messages AS 4700.6(Int)2007 Implementation of Health Level Seven (HL7) Version 2.5Referral, discharge and health record messaging AS 4700.62006 Implementation of Health Level Seven (HL7) Version 2.4Referral, discharge and health record messaging AS 4700.62004 Implementation of Health Level Seven (HL7) Version 2.3.1Referral and discharge summary AS 4700.72005 Implementation of Health Level Seven (HL7) Version 2.3.1Diagnostic imaging orders and results AS 49622005 Electronic toll collectionTransaction specification for Australian interoperability on the DSRC link ATS 50382006 Health supply chain messagingEvaluated receipts settlement HB 172.12006 Message Usage ModelHistory and conceptual framework HB 172.22006 Message Usage ModelCurrent Standards HB 2222006 Australian Health Care Client and Provider Identification Handbook HB 2352007 Implementers guideline for HL7 referral, discharge and health record messaging HB 2622008 Guidelines for pathology messaging between pathology providers and health service providers HB 3042007 Guide to Australian electronic communication in health care HB 3072007 Guide to the principles and desirable features of clinical decision support systems MP 962008 Standards for enterprise-wide patient administration systems MP 972008 Standards for enterprise-wide clinical information systems TR 29612007 Telehealth standards scoping study TR 29652007 Harmonisation of HD and EI data types across AS 4700.X Standards and associated Handbooks TR 29662007 Standardization of Hierarchic Designators in HL7 messaging TR 48902008 HL7 messaging requirements for scheduling, bed availability, consent and eligibility Data link layer AS 27491985 Information processingBasic mode control procedures for data communication systems AS/NZS 3512:2000 Information technologyTelecommunications and information exchange between systemsHigh-level data link control proceduresDescription of the X.25 LAPBcompatible DTE data link procedures AS 3512 Supplement 11995 Information processing systems Data communicationHigh-level data link control procedures Description of the X.25 LAPB-compatible DTE data link proceduresConformance requirements (Supplement to AS 3512 1987) AS/NZS 4157.1:2000 Information technologyTelecommunications and information exchange between systemsX.25 DTE conformance testingGeneral principles AS/NZS 4157.2:2000 Information technologyTelecommunications and information exchange between systemsX.25 DTE conformance testingData link layer conformance test suite AS/NZS 4157.3:2000 Information technologyTelecommunications and information exchange between systemsX.25 DTE conformance testingPacket layer conformance test suite AS/NZS 4228:1994 Information technologyTelecommunications and information exchange between systemsStandard group medium access control addresses Multilayer applications AS/NZS 4170.1:1994 Information technologyInternational standardized profiles TB, TC, TD and TEConnection-mode transport service over connection-mode network service Subnetwork-type independent requirements for group TB AS/NZS 4170.2:1994 Information technologyInternational standardized profiles TB, TC, TD and TEConnection-mode transport service over connection-mode network service Subnetwork-type independent requirements for group TC
AS/NZS 4170.3:1994 Information technologyInternational standardized profiles TB, TC, TD and TEConnection-mode transport service over connection-mode network service Subnetwork-type independent requirements for group TD AS/NZS 4170.4:1994 Information technologyInternational standardized profiles TB, TC, TD and TEConnection-mode transport service over connection-mode network service Subnetwork-type independent requirements for group TE AS/NZS 4170.5:1994 Information technologyInternational standardized profiles TB, TC, TD and TEConnection-mode transport service over connection-mode network serviceDefinition of profiles TB1111/TB1121 AS/NZS 4170.6:1994 Information technologyInternational standardized profiles TB, TC, TD and TEConnection-mode transport service over connection-mode network serviceDefinition of profiles TC1111/TC1121 AS/NZS 4170.7:1994 Information technologyInternational standardized profiles TB, TC, TD and TEConnection-mode transport service over connection-mode network serviceDefinition of profiles TD1111/TD1121 AS/NZS 4170.8:1994 Information technologyInternational standardized profiles TB, TC, TD and TEConnection-mode transport service over connection-mode network serviceDefinition of profiles TE1111/TE1121 AS/NZS 4170.9:1994 Information technologyInternational standardized profiles TB, TC, TD and TEConnection-mode transport service over connection-mode network service Subnetwork-type dependent requirements for the network layer, data link layer and physical layer concerning permanent access to a packet switched data network using virtual calls AS/NZS 4223.1:1994 Information technologyInternational standardized profile FOD11Open document format: Simple document structureCharacter content architecture onlyDocument application profile AS/NZS 4229.1:1994 Information technologyInternational standardized profile TAnnnnConnection-mode transport service over connectionless-mode network serviceGeneral overview and subnetwork-independent requirements AS/NZS 4229.2:1994 Information technologyInternational standardized profile TAnnnnConnection-mode transport service over connectionless-mode network serviceTA51 profile including subnetwork-dependent requirements for CSMA/CD local area networks AS/NZS 4229.5:1994 Information technologyInternational standardized profile TAnnnnConnection-mode transport service over connectionless-mode network serviceTA1111/TA1121 profiles including subnetwork-dependent requirements for X.25 packet-switched data networks using virtual calls AS/NZS 4246.1:1994 Information technologyInternational standardized profile FOD26Open document format: Enhanced document structureCharacter, raster graphics and geometric graphics content architecturesDocument application profile AS/NZS 4247.1:1994 Information technologyInternational standardized profile FOD36Open document format: Extended document structureCharacter, raster graphics and geometric graphics content architecturesDocument application profile AS/NZS 4248.1:1994 Information technologyInternational standardized profiles AOM1n OSI managementManagement communicationsSpecification of ACSE, presentation and session protocols for the use by ROSE and CMISE AS/NZS 4248.2:1994 Information technologyInternational standardized profiles AOM1n OSI managementManagement communicationsCMISE/ROSE for AOM12Enhanced management communications AS/NZS 4248.3:1994 Information technologyInternational standardized profiles AOM1n OSI managementManagement communicationsCMISE/ROSE for AOM11Basic management communications AS/NZS 13236:2000 Information technologyQuality of service: Framework Network layer AS/NZS 2994:2000 Information technologyOpen Systems InterconnectionNetwork service definition AS/NZS 3604:1994 Information technologyTelecommunications and information exchange between systemsUse of X.25 to provide the OSI connection-mode network service AS/NZS 3621:2000 Information technologyData communications X.25 packet layer protocol for data terminal equipment
381
SUBJECT INDEX
AS/NZS ISO/IEC 13235.3:2006 Information technologyOpen Distributed ProcessingTrading functionProvision of Trading Function using OSI Director Service Open systems interconnection in general AS/NZS 2777.1:1998 Information processing systemsOpen Systems InterconnectionBasic reference modelThe basic model AS 2777.21990 Information processing systemsOpen systems interconnectionBasic reference modelSecurity architecture AS 2777.31990 Information processing systemsOpen systems interconnectionBasic reference modelNaming and addressing AS 2777.41990 Information processing systemsOpen systems interconnectionBasic reference modelManagement framework AS/NZS 3692:1993 Information technologyOpen Systems InterconnectionSystems management overview AS/NZS 4103.1:1993 Information technologyOpen Systems InterconnectionConformance testing methodology and framework General concepts AS/NZS 4103.2:1993 Information technologyOpen Systems InterconnectionConformance testing methodology and framework Abstract test suite specification AS/NZS 4103.3:1994 Information technologyOpen Systems InterconnectionConformance testing methodology and framework The tree and tabular combined notation AS/NZS 4103.4:1993 Information technologyOpen Systems InterconnectionConformance testing methodology and framework Test realization AS/NZS 4103.5:1993 Information technologyOpen Systems InterconnectionConformance testing methodology and framework Requirements on test laboratories and clients for the conformance assessment process AS/NZS 4153.1:1994 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authoritiesGeneral procedures AS/NZS 4153.1 Supplement 1:1999 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authoritiesGeneral proceduresIncorporation of object identifiers components (Supplement to AS/NZS 4153.1:1994) AS/NZS 4153.1 Supplement 2:1999 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authoritiesGeneral proceduresIncorporation of the root arcs of the object identifier tree (Supplement to AS/NZS 4153.1:1994) AS/NZS 4153.2:1994 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authoritiesRegistration procedures for OSI document types AS/NZS 4153.3:1999 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authoritiesRegistration of values of RH-name-tree components for joint ISO and ITU-T use AS/NZS 4153.4:1993 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authoritiesRegister of VTE profiles AS/NZS 4153.5:1993 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authoritiesRegister of VT control object definitions AS/NZS 4153.6:1994 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authoritiesApplication processes and application entities AS/NZS 4153.7:1999 Information technologyOpen Systems InterconnectionProcedures for the operation of OSI registration authoritiesAssignment of international names for use in specific contexts AS/NZS 4199:1994 Information processing systemsOpen Systems InterconnectionLOTOSA formal description technique based on the temporal ordering of observational behaviour AS 107451998 Information technologyOpen Systems InterconnectionUpper layers security model AS/NZS ISO/IEC 13235.1:2006 Information technologyOpen Distributed ProcessingTrading functionSpecification AS/NZS ISO/IEC 13235.3:2006 Information technologyOpen Distributed ProcessingTrading functionProvision of Trading Function using OSI Director Service AS/NZS 13594:1998 Information technologyLower layers security AS/NZS ISO/IEC 14752:2003 Information technologyOpen distributed processingProtocol support for computational interactions
AS/NZS 3651:1994 Information processing systems Telecommunications and information exchange between systemsEnd system to intermediate system routing exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service AS/NZS 3682:1994 Information processing systemsData communicationsProtocol for providing the connectionless-mode network service AS 39691991 Information technologyTelecommunications and information exchange between systemsOSI Routing Framework AS 40151992 Information technologyTelecommunications and information exchange between systemsOperation of an X.25 interworking unit AS/NZS 4093:1994 Information technologyTelecommunications and information exchange between systemsProtocol identification in the network layer AS/NZS 4095:1993 Information technologyTelecommunications and information exchange between systemsEnd system routing information exchange protocol for use in conjunction with AS/NZS 3604 AS/NZS 4095 Supplement 1:1995 Information technology Telecommunications and information exchange between systemsEnd system routing information exchange protocol for use in conjunction with AS 3604Protocol implementation conformance statement (Supplement to AS/NZS 4095:1993) AS/NZS 4099:1994 Information technologyTelecommunications and information exchange between systemsProvision of the OSI connection-mode network service by packet mode terminal equipment connected to an integrated services digital network AS/NZS 4104:1993 Information technologyTelecommunications and information exchange between systemsNetwork/transport protocol interworking specification AS/NZS 4107.1:1993 Information technologyTelecommunications and information exchange between systemsProtocol combinations to provide and support the OSI network serviceGeneral principles AS/NZS 4107.2:1994 Information technologyTelecommunications and information exchange between systemsProtocol combinations to provide and support the OSI network serviceProvision and support of the connection-mode network service AS/NZS 4107.3:1993 Information technologyTelecommunications and information exchange between systemsProtocol combinations to provide and support the OSI network serviceProvision and support of the connectionless-mode network service AS/NZS 4149:1994 Information technologyTelecommunications and information exchange between systemsIntermediate system to intermediate system intra-domain routing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service AS/NZS 4157.1:2000 Information technologyTelecommunications and information exchange between systemsX.25 DTE conformance testingGeneral principles AS/NZS 4157.2:2000 Information technologyTelecommunications and information exchange between systemsX.25 DTE conformance testingData link layer conformance test suite AS/NZS 4157.3:2000 Information technologyTelecommunications and information exchange between systemsX.25 DTE conformance testingPacket layer conformance test suite AS/NZS 4209:1994 Information technologyTelecommunications and information exchange between systemsDefinition of the relaying functions of a network layer intermediate system AS/NZS 4217:1994 Information technologyTelecommunications and information exchange between systemsProvision of the connection-mode network internal layer service by intermediate systems using the X.25 packet layer protocol AS/NZS 4224:1994 Information technologyUse of X.25 packet layer protocol to provide the OSI connection-mode network service over the telephone network AS/NZS 4231:1994 Information technologyTelecommunications and information exchange between systemsElements of management information related to OSI network layer standards AS/NZS 4232:1994 Information technologyUse of X.25 packet layer protocol in conjunction with X.21/X.21bis to provide the OSI connection-mode network service AS/NZS 4471:1997 Information technologyOpen Systems InterconnectionNetwork layer security protocol AS/NZS ISO/IEC 13235.1:2006 Information technologyOpen Distributed ProcessingTrading functionSpecification
382
SUBJECT INDEX
AS/NZS ISO/IEC 14753:2003 Information technologyOpen distributed processingInterface references and binding AS/NZS ISO/IEC 14769:2003 Information technologyOpen distributed processingType repository function AS/NZS ISO/IEC 14771:2003 Information technologyOpen distributed processingNaming framework HB 55.11993 ANZ GOSIP 3Specifications HB 55.21993 ANZ GOSIP 3Technical Description HB 55.31993 ANZ GOSIP 3Referenced Standards HB 55.4:1993 ANZ GOSIP 3ANZ Overview HB 55.5:1993 ANZ GOSIP 3ANZ Implementation Planning Guidelines HB 55.5 Supplement 1:1994 ANZ GOSIP 3ANZ Implementation Planning GuidelinesSNA Based Networks (Supplement to SAA/SNZ HB55.5:1993) HB 55.6:1993 ANZ GOSIP 3ANZ Naming and Addressing Guidelines HB 55.71993 ANZ GOSIP 3Australian Procurement Guidelines HB 55.8:1995 ANZ GOSIP 3Network Management Guidelines HB 55.9:1995 ANZ GOSIP 3Security Guidelines HB 561993 UK GOSIP Version 4 Specification HB 68:1995 Information technologyOpen Systems InterconnectionTutorial on naming and addressing MP 592000 Naming and addressing in the Australian OSI environment MP 621992 OSIVocabulary MP 67.11992 Standardized interoperability tests in the OSI environmentX.400 tests MP 67.21992 Standardized interoperability tests in the OSI environmentFTAM tests Physical layer AS 27481991 Information technologyData communication25pole DTE/DCE interface connector and contact number assignments AS 2748 Supplement 11995 Information technologyData communication25-pole DTE/DCE interface connector and contact number assignmentsInterface connector and contact assignments for a DTE/DCE interface for data signalling rates above 20 000 bit/s (Supplement to AS 27481991) AS/NZS 3594:1994 Information technologyTelecommunications and information exchange between systemsInterface connector and contact assignments for ISDN basic access interface located at reference points S and T AS/NZS 3612:1994 Information technologyData communication 37-pole DTE/DCE interface connector and contact number assignments AS 36131991 Information technologyData communications15pole DTE/DCE interface connector and contact number assignments AS/NZS 3618:1993 Information technologyTelecommunications and information exchange between systemsStart-stop transmission signal quality at DTE/DCE interfaces AS 3734.11991 Information systemsEquipmentFibre distributed data interfaces (FDDI)Token ring PHYsical layer protocol (PHY) AS 3734.21991 Information systemsEquipmentFibre distributed data interface (FDDI)Token ring Media Access Control (MAC) AS 3734.31991 Information systemsEquipmentFibre Distributed Data Interface (FDDI)Physical layer Medium Dependent (PMD) AS 40221992 Information technologyOpen Systems InterconnectionPhysical service definition AS/NZS 4102:1993 Information technologyIntegrated services digital network primary access connector at reference points S and T AS/NZS 4160:1994 Information processing systemsInformation exchange between systemsSynchronous transmission signal quality at DTE/DCE interfaces AS/NZS 4161:2000 Information technologyTelecommunications and information exchange between systemsDTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits AS/NZS 4162:1994 Information technologyGalvanic isolation of balanced interchange circuits AS/NZS 4244:1994 Information technologyTelecommunications and information exchange between systems26-pole interface connector mateability dimensions and contact number assignments
Presentation layer AS/NZS 4222.1:1994 Information technologyOpen Systems InterconnectionConformance test suite for the presentation layer Test suite structure and test purposes for the presentation protocol AS/NZS 8824.1:1998 Information technologyAbstract syntax notation oneSpecification of basic notation AS/NZS 8824.2:1998 Information technologyAbstract syntax notation oneInformation object specification AS/NZS 8824.3:1998 Information technologyAbstract syntax notation oneConstraint specification AS/NZS 8824.4:1998 Information technologyAbstract syntax notation oneParameterization of ASN.1 specifications AS/NZS 8825.1:1998 Information technologyASN.1 encoding rulesSpecification of basic encoding rules, canonical encoding rules and distinguished encoding rules AS/NZS 8825.2:1998 Information technologyASN.1 encoding rulesSpecification of packed encoding rules Session layer AS/NZS 4206:1994 Information technologyOpen Systems InterconnectionLOTOS description of the session protocol AS/NZS 4207:1994 Information technologyOpen Systems InterconnectionLOTOS description of the session service Transport layer AS/NZS 4164:1994 Information technologyTelecommunications and information exchange between systemsFormal description of AS 2911 in LOTOS AS/NZS 4165:1994 Information technologyTelecommunications and information exchange between systemsFormal description of AS/NZS 2912 (Classes 0, 1, 2, 3) in LOTOS AS/NZS 4210.3:1994 Information technologyTelecommunications and information exchange between systemsTransport conformance testing for connection-mode transport protocol operating over connection-mode network serviceTransport test management protocol specification AS/NZS 4245:1994 Information technologyTelecommunications and information exchange between systemsOpen Systems InterconnectionTransport protocol identification mechanism OPTICS AND OPTICAL MEASUREMENTS Colours and measurement of light AS 1680.31991 Interior lightingMeasurement, calculation and presentation of photometric data AS/NZS 2633:1996 Guide to the specification of colours AS 27001996 Colour Standards for general purposes AS 2700S1996 Colour Standards for general purposesSwatches AS 2700S1996 (B11) Colour Standards for general purposes Rich Blue AS 2700S1996 (B12) Colour Standards for general purposes Royal Blue AS 2700S1996 (B13) Colour Standards for general purposes Navy Blue AS 2700S1996 (B14) Colour Standards for general purposes Sapphire AS 2700S1996 (B15) Colour Standards for general purposesMid Blue AS 2700S1996 (B21) Colour Standards for general purposes Ultramarine AS 2700S1996 (B22) Colour Standards for general purposes Homebush Blue AS 2700S1996 (B23) Colour Standards for general purposes Bright Blue AS 2700S1996 (B24) Colour Standards for general purposes Harbour Blue AS 2700S1996 (B25) Colour Standards for general purposes Aqua AS 2700S1996 (B32) Colour Standards for general purposes Powder Blue AS 2700S1996 (B33) Colour Standards for general purposesMist Blue AS 2700S1996 (B34) Colour Standards for general purposes Paradise Blue AS 2700S1996 (B35) Colour Standards for general purposes Pale Blue AS 2700S1996 (B41) Colour Standards for general purposes Bluebell AS 2700S1996 (B42) Colour Standards for general purposes Purple Grey
383
SUBJECT INDEX
AS 2700S1996 (G52) Colour Standards for general purposes Eucalyptus AS 2700S1996 (G53) Colour Standards for general purposes Banksia AS 2700S1996 (G54) Colour Standards for general purposesMist Green AS 2700S1996 (G55) Colour Standards for general purposes Lichen AS 2700S1996 (G56) Colour Standards for general purposes Sage Green AS 2700S1996 (G61) Colour Standards for general purposes Dark Green AS 2700S1996 (G62) Colour Standards for general purposes Rivergum AS 2700S1996 (G63) Colour Standards for general purposes Deep Bronze Green AS 2700S1996 (G64) Colour Standards for general purposes Slate AS 2700S1996 (G65) Colour Standards for general purposesTitree AS 2700S1996 (G66) Colour Standards for general purposes Environment Green AS 2700S1996 (G67) Colour Standards for general purposes Zucchini AS 2700S1996 (N11) Colour Standards for general purposes Pearl Grey AS 2700S1996 (N12) Colour Standards for general purposes Pastel Grey AS 2700S1996 (N14) Colour Standards for general purposes White AS 2700S1996 (N15) Colour Standards for general purposes Homebush Grey AS 2700S1996 (N22) Colour Standards for general purposes Cloud Grey AS 2700S1996 (N23) Colour Standards for general purposes Neutral Grey AS 2700S1996 (N24) Colour Standards for general purposes Silver Grey AS 2700S1996 (N25) Colour Standards for general purposes Birch Grey AS 2700S1996 (N32) Colour Standards for general purposes Green Grey AS 2700S1996 (N33) Colour Standards for general purposes Lightbox Grey AS 2700S1996 (N35) Colour Standards for general purposes Light Grey AS 2700S1996 (N41) Colour Standards for general purposes Oyster AS 2700S1996 (N42) Colour Standards for general purposes Storm Grey AS 2700S1996 (N43) Colour Standards for general purposes Pipeline Grey AS 2700S1996 (N44) Colour Standards for general purposes Bridge Grey AS 2700S1996 (N45) Colour Standards for general purposes Koala Grey AS 2700S1996 (N52) Colour Standards for general purposesMid Grey AS 2700S1996 (N53) Colour Standards for general purposes Blue Grey AS 2700S1996 (N54) Colour Standards for general purposes Basalt AS 2700S1996 (N55) Colour Standards for general purposes Lead Grey AS 2700S1996 (N61) Colour Standards for general purposes Black AS 2700S1996 (N63) Colour Standards for general purposes Pewter AS 2700S1996 (N64) Colour Standards for general purposes Dark Grey AS 2700S1996 (N65) Colour Standards for general purposes Graphite Grey AS 2700S1996 (P11) Colour Standards for general purposes Magenta AS 2700S1996 (P12) Colour Standards for general purposes Purple
Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposesSky Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposesSurf Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes Colour Standards for general purposes
384
SUBJECT INDEX
AS 2700S1996 (P13) Colour Standards for general purposes Violet AS 2700S1996 (P14) Colour Standards for general purposes Blueberry AS 2700S1996 (P21) Colour Standards for general purposes Sunset Pink AS 2700S1996 (P22) Colour Standards for general purposes Cyclamen AS 2700S1996 (P23) Colour Standards for general purposes Lilac AS 2700S1996 (P24) Colour Standards for general purposes Jacaranda AS 2700S1996 (P31) Colour Standards for general purposes Dusty Pink AS 2700S1996 (P33) Colour Standards for general purposes Ribbon Pink AS 2700S1996 (P41) Colour Standards for general purposes Erica Pink AS 2700S1996 (P42) Colour Standards for general purposes Mulberry AS 2700S1996 (P43) Colour Standards for general purposes Wisteria AS 2700S1996 (P52) Colour Standards for general purposes Plum AS 2700S1996 (R11) Colour Standards for general purposes International Orange AS 2700S1996 (R12) Colour Standards for general purposes Scarlet AS 2700S1996 (R13) Colour Standards for general purposes Signal Red AS 2700S1996 (R14) Colour Standards for general purposes Waratah AS 2700S1996 (R15) Colour Standards for general purposes Crimson AS 2700S1996 (R21) Colour Standards for general purposes Tangerine AS 2700S1996 (R22) Colour Standards for general purposes Homebush Red AS 2700S1996 (R23) Colour Standards for general purposes Lollipop AS 2700S1996 (R24) Colour Standards for general purposes Strawberry AS 2700S1996 (R25) Colour Standards for general purposes Rose Pink AS 2700S1996 (R32) Colour Standards for general purposes Apple Blossom AS 2700S1996 (R33) Colour Standards for general purposes Ghost Gum AS 2700S1996 (R34) Colour Standards for general purposes Mushroom Pink AS 2700S1996 (R35) Colour Standards for general purposes Deep Rose AS 2700S1996 (R41) Colour Standards for general purposes Shell Pink AS 2700S1996 (R42) Colour Standards for general purposes Salmon Pink AS 2700S1996 (R43) Colour Standards for general purposesRed Dust AS 2700S1996 (R44) Colour Standards for general purposes Possum AS 2700S1996 (R45) Colour Standards for general purposes Ruby AS 2700S1996 (R51) Colour Standards for general purposes Burnt Pink AS 2700S1996 (R52) Colour Standards for general purposes Terracotta AS 2700S1996 (R53) Colour Standards for general purposesRed Gum AS 2700S1996 (R54) Colour Standards for general purposes Raspberry AS 2700S1996 (R55) Colour Standards for general purposes Claret AS 2700S1996 (R62) Colour Standards for general purposes Venetian Red AS 2700S1996 (R63) Colour Standards for general purposesRed Oxide
AS 2700S1996 (R64) Deep Indian Red AS 2700S1996 (R65) Maroon AS 2700S1996 (T11) Tropical Blue AS 2700S1996 (T12) Diamantina AS 2700S1996 (T14) Malachite AS 2700S1996 (T15) Turquoise AS 2700S1996 (T22) Oriental Blue AS 2700S1996 (T24) Jade AS 2700S1996 (T32) Huon Green AS 2700S1996 (T33) Smoke Blue AS 2700S1996 (T35) Green Ice AS 2700S1996 (T44) Gum AS 2700S1996 (T45) Cootamundra AS 2700S1996 (T51) Mountain Blue AS 2700S1996 (T53) Peacock Blue AS 2700S1996 (T63) AS 2700S1996 (X11) Butterscotch AS 2700S1996 (X12) Pumpkin AS 2700S1996 (X13) Marigold AS 2700S1996 (X14) Mandarin AS 2700S1996 (X15) Orange AS 2700S1996 (X21) Pale Ochre AS 2700S1996 (X22) Saffron AS 2700S1996 (X23) Apricot AS 2700S1996 (X24) Rockmelon AS 2700S1996 (X31) Raffia AS 2700S1996 (X32) Magnolia AS 2700S1996 (X33) Warm White AS 2700S1996 (X34) Driftwood AS 2700S1996 (X41) AS 2700S1996 (X42) Biscuit AS 2700S1996 (X43) Beige AS 2700S1996 (X45) Cinnamon AS 2700S1996 (X51) AS 2700S1996 (X52) Coffee AS 2700S1996 (X53) Golden Tan AS 2700S1996 (X54) Brown AS 2700S1996 (X55) Brown AS 2700S1996 (X61) Wombat AS 2700S1996 (X62) Dark Earth
385
SUBJECT INDEX
OPTOELECTRONICS. LASER EQUIPMENT AS/NZS 2211.1:2004 Safety of laser productsEquipment classification, requirements and users guide (IEC 60825-1:2001, MOD) AS/NZS 2211.2:2006 Safety of laser productsSafety of optical fibre communication systems (OFCS) AS/NZS 2211.3:2002 Safety of laser productsGuidance for laser displays and shows AS/NZS 2211.4:2002 Safety of laser productsLaser guards AS/NZS 2211.5:2006 Safety of laser productsManufacturers checklist for AS/NZS2211.1 AS/NZS 2211.6:2002 Safety of laser productsSafety of products with optical sources, exclusively used for visible information transmission to the human eye AS/NZS 2211.7:2002 Safety of laser productsSafety of products emitting infrared optical radiation, exclusively used for wireless 'free air' data transmission and surveillance AS/NZS 2211.9:2002 Safety of laser productsCompilation of maximum permissible exposure to incoherent optical radiation AS/NZS 2211.10:2004 Safety of laser productsApplication guidelines and explanatory notes to AS/NZS2211.1 (IECTR60825-10:2002, MOD) AS/NZS 2211.12:2006 Safety of laser productsSafety of free space optical communication systems used for transmission of information AS 23971993 Safe use of lasers in the building and construction industry AS/NZS 4173:2004 Guide to the safe use of lasers in health care AS/NZS ISO 11553:2004 Safety of machineryLaser processing machines Safety requirements AS/NZS ISO 11990:2002 Optics and optical instrumentsLasers and laserrelated equipmentDetermination of laser resistance of tracheal tube shafts PACKAGING AND DISTRIBUTION OF GOODS IN GENERAL AS 15992006 Pressure-sensitive and water activated adhesive tape for packaging and office applications AS 2400.11995 PackagingGlossary of packaging terms AS 2400.52005 PackagingTemporary corrosion protection AS 2400.61986 PackagingPaper and paperboard AS 2400.71990 PackagingTimber boxes AS 2400.81989 PackagingTextile bags, sacks and wrappings AS 2400.102006 PackagingProtection against shock and vibration (cushioning) AS 2400.111988 PackagingCordage AS 2400.131983 PackagingTensional strapping AS 2400.141985 PackagingAdhesives AS 2400.161986 PackagingFlexible packaging AS 2400.181983 PackagingUse of desiccants in packaging AS 2400.222005 PackagingClosures AS 28522004 PackagingPictorial marking for the handling of packages AS 48342007 Packaging for surface transport of biological material that may cause disease in humans, animals and plants HB 295.3.12008 Product Safety FrameworkVisual and tactile examination of components HB 295.3.22008 Product Safety FrameworkHazardous sharp points HB 295.3.32008 Product Safety FrameworkHazardous sharp edges HB 295.3.32007 Product Safety FrameworkHazardous sharp edges HB 295.3.42008 Product Safety FrameworkRequirements for decoration HB 295.3.42007 Product Safety FrameworkRequirements for decoration HB 295.3.52008 Product Safety FrameworkProduct safety warning labels and markings HB 295.3.52007 Product Safety FrameworkProduct safety warning labels and markings HB 295.3.62008 Product Safety FrameworkScissoring, shearing and pinching HB 295.3.62007 Product Safety FrameworkScissoring, shearing and pinching HB 295.3.72008 Product Safety FrameworkSmall objectsRemoval of graspable components HB 295.3.72007 Product Safety FrameworkSmall objectsRemoval of graspable components HB 295.3.182008 Product Safety FrameworkPackaging hazards HB 295.3.182007 Product Safety FrameworkPackaging hazards HB 295.3.192008 Product Safety FrameworkTrapsCords and elastics HB 295.3.202008 Product Safety FrameworkSnagging trapsProtrusions and gaps HB 295.3.212008 Product Safety FrameworkGaps and openingsFinger entrapment
AS 2700S1996 (X63) Colour Standards for general purposes Ironbark AS 2700S1996 (X64) Colour Standards for general purposes Chocolate AS 2700S1996 (X65) Colour Standards for general purposes Dark Brown AS 2700S1996 (Y11) Colour Standards for general purposes Canary AS 2700S1996 (Y12) Colour Standards for general purposes Wattle AS 2700S1996 (Y13) Colour Standards for general purposes Vivid Yellow AS 2700S1996 (Y14) Colour Standards for general purposes Golden Yellow AS 2700S1996 (Y15) Colour Standards for general purposes Sunflower AS 2700S1996 (Y16) Colour Standards for general purposesInca Gold AS 2700S1996 (Y21) Colour Standards for general purposes Primrose AS 2700S1996 (Y22) Colour Standards for general purposes Custard AS 2700S1996 (Y23) Colour Standards for general purposes Buttercup AS 2700S1996 (Y24) Colour Standards for general purposes Straw AS 2700S1996 (Y25) Colour Standards for general purposes Deep Cream AS 2700S1996 (Y26) Colour Standards for general purposes Homebush Gold AS 2700S1996 (Y31) Colour Standards for general purposesLily Green AS 2700S1996 (Y32) Colour Standards for general purposes Flummery AS 2700S1996 (Y33) Colour Standards for general purposes Pale Primrose AS 2700S1996 (Y34) Colour Standards for general purposes Cream AS 2700S1996 (Y35) Colour Standards for general purposesOff White AS 2700S1996 (Y41) Colour Standards for general purposes Olive Yellow AS 2700S1996 (Y42) Colour Standards for general purposes Mustard AS 2700S1996 (Y43) Colour Standards for general purposes Parchment AS 2700S1996 (Y44) Colour Standards for general purposes Sand AS 2700S1996 (Y45) Colour Standards for general purposes Manilla AS 2700S1996 (Y51) Colour Standards for general purposes Bronze Olive AS 2700S1996 (Y52) Colour Standards for general purposes Chamois AS 2700S1996 (Y53) Colour Standards for general purposes Sandstone AS 2700S1996 (Y54) Colour Standards for general purposes Oatmeal AS 2700S1996 (Y55) Colour Standards for general purposes Deep Stone AS 2700S1996 (Y56) Colour Standards for general purposes Merino AS 2700S1996 (Y61) Colour Standards for general purposes Black Olive AS 2700S1996 (Y62) Colour Standards for general purposes Sugar Cane AS 2700S1996 (Y63) Colour Standards for general purposes Khaki AS 2700S1996 (Y65) Colour Standards for general purposes Mushroom AS 2700S1996 (Y66) Colour Standards for general purposes Mudstone AS 40042006 Lighting booths for visual assessment of colour and colour matching Optical measuring instruments AS ISO 154722006 Surface chemical analysisX-ray photoelectron spectrometersCalibration of energy scales
386
SUBJECT INDEX
HB 295.3.222008 Product Safety FrameworkGaps and openingsLimb entrapment HB 295.3.232008 Product Safety FrameworkGaps and openingsHead entrapment and fall through hazard HB 295.3.242008 Product Safety FrameworkInformative and instructive material HB 295.3.242007 Product Safety FrameworkInformative and instructive material HB 295.3.252008 Product Safety FrameworkChoking from small parts HB 295.3.252007 Product Safety FrameworkChoking from small parts HB 295.3.262008 Product Safety FrameworkLatching and locking mechanisms HB 295.3.272008 Product Safety FrameworkRequirements for toys HB 295.3.272007 Product Safety FrameworkRequirements for toys HB 295.3.292008 Product Safety FrameworkAccessibility of a part or component HB 295.3.292007 Product Safety FrameworkAccessibility of a part or component PACKAGING MATERIALS AND ACCESSORIES AS 19282007 Child-resistant packagingRequirements and testing procedures for reclosable packages (ISO 8317:2003, MOD) AS 19282001 Child-resistant packages AS 21831991 Flexible wrappings (including laminates) for rindless cheese AS 2400.61986 PackagingPaper and paperboard AS 2400.81989 PackagingTextile bags, sacks and wrappings AS 2400.111988 PackagingCordage AS 2400.131983 PackagingTensional strapping AS 2400.161986 PackagingFlexible packaging AS 2400.181983 PackagingUse of desiccants in packaging AS 2400.222005 PackagingClosures AS/NZS 4255.1:1994 Security sealsClassification AS/NZS 4255.2:1994 Security sealsUse AS 47102001 Packages for chemicals not intended for access or contact with their contents by humans AS 47362006 Biodegradable plasticsBiodegradable plastics suitable for composting and other microbial treatment AS 48342007 Packaging for surface transport of biological material that may cause disease in humans, animals and plants AS 49402002 User-applied identification labels for use on fluid bags, syringes and drug administration lines PAINT COATING EQUIPMENT AS 22681979 Electrostatic paint and powder sprayguns for explosive atmospheres AS/NZS 4114.1:2003 Spray painting booths, designated spray painting areas and paint mixing roomsDesign, construction and testing AS/NZS 4114.1:1995 Spray painting boothsDesign, construction and testing AS/NZS 4114.2:2003 Spray painting booths, designated spray painting areas and paint mixing roomsInstallation and maintenance PAINT COATING PROCESSES AS/NZS 2311:2000 Guide to the painting of buildings AS 4361.11995 Guide to lead paint managementIndustrial applications AS 4361.21998 Guide to lead paint managementResidential and commercial buildings PAINT INGREDIENTS Pigments and extenders AS 28552004 Paints and related materialsMicaceous iron oxide pigment Solvents AS 28711988 Solvents1,1,1-Trichloroethane (inhibited) AS 35291988 SolventsToluene AS 35301988 SolventsMineral turpentine and white spirit PAINTS AND VARNISHES AS 1580.02004 Paints and related materialsMethods of testIntroduction and list of methods AS/NZS 1580.101.1:1999 Paints and related materialsMethods of testConditions of testTemperature, humidity and airflow control AS 1580.101.32002 Paints and related materialsMethods of test- Standard procedure for stoving AS/NZS 1580.101.4:1999 Paints and related materialsMethods of testConditions of testTemperature control AS/NZS 1580.101.5:1999 Paints and related materialsMethods of testConditions of testTemperature and humidity control
AS 1580.102.12002 Paints and related materialsMethods of test- Sampling procedure AS/NZS 1580.102.2:1995 Paints and related materialsMethods of test- Inprocess sampling AS/NZS 1580.103.1:1995 Paints and related materialsMethods of testExamination and preparation of samples for testing AS/NZS 1580.104.1:2000 Paints and related materialsMethods of testRecommended materials for test panels AS 1580.105.12002 Paints and related materialsMethods of test- Pretreatment of metal test panelsSolvent cleaning AS 1580.105.22002 Paints and related materialsMethods of test- Pretreatment of metal test panelsSanding AS/NZS 1580.106.1:1995 Paints and related materialsMethods of testPreparation of timber test panels for outdoor weathering test AS 1580.107.12004 Paints and related materialsMethods of test Determination of wet film thickness from dry film mass AS/NZS 1580.107.2:1995 Paints and related materialsMethods of testDetermination of wet film thickness from wet film mass AS/NZS 1580.107.3:1997 Paints and related materialsMethods of testDetermination of wet film thickness by gauge AS/NZS 1580.107.8:1995 Paints and related materialsMethods of testApplication of paint at a nominated spreading rate by determination of wet film mass (brush application) AS/NZS 1580.108.1:1994 Paints and related materialsMethods of testDetermination of dry film thickness on metallic substratesNondestructive methods AS 1580.108.22004 Paints and related materialsMethods of testDry film thicknessPaint inspection gauge AS/NZS 1580.202.1:1995 Paints and related materialsMethods of testDensity AS/NZS 1580.202.2:1995 Paints and related materialsMethods of testDensity of water-dispersed paints subject to foaming AS 1580.202.32005 Paints and related materialsMethods of test- Determination of specific gravity of liquids by hydrometer AS 1580.202.42005 Paints and related materialsMethods of test- Determination of density by pressure cup AS 1580.203.12004 Paints and related materialsMethods of testSkin formation AS/NZS 1580.204.1:1998 Paints and related materialsMethods of testFineness of grind AS/NZS 1580.205.1:1997 Paints and related materialsMethods of testApplication propertiesBrushing AS/NZS 1580.205.2:1997 Paints and related materialsMethods of testApplication propertiesConventional spraying AS/NZS 1580.205.3:1997 Paints and related materialsMethods of testApplication propertiesRoller coating AS/NZS 1580.205.4:1998 Paints and related materialsMethods of testApplication propertiesAirless spraying AS/NZS 1580.208.1:1999 Paints and related materialsMethods of testThinner compatibility AS/NZS 1580.211.1:1995 Paints and related materialsMethods of testDegree of settling AS/NZS 1580.211.2:1995 Paints and related materialsMethods of testEase of manual re-incorporation AS/NZS 1580.213.1:1997 Paints and related materialsMethods of testRelative dry hiding power AS 1580.213.22004 Paints and related materialsMethods of testDry hiding powerContrast ratio AS/NZS 1580.214.0:1996 Paints and related materialsMethods of testRheological propertiesGuide to test methods AS/NZS 1580.214.1:1997 Paints and related materialsMethods of testConsistencyStormer viscometer AS/NZS 1580.214.2:1996 Paints and related materialsMethods of testConsistencyFlow cup AS 1580.214.32003 Paints and related materialsMethods of test- ViscosityCone-and-plate AS/NZS 1580.214.4:1996 Paints and related materialsMethods of testConsistencyRotothinner AS/NZS 1580.214.5:1997 Paints and related materialsMethods of testConsistencyRotational viscometer AS/NZS 1580.214.6:1995 Paints and related materialsMethods of testConsistencyISO flow cups AS 1580.301.12005 Paints and related materialsMethods of testNonvolatile content by mass AS 1580.301.21990 Paints and related materialsMethods of test- Nonvolatile content by volume (volume solids)
387
SUBJECT INDEX
AS/NZS 1580.481.1.10:1998 Paints and related materialsMethods of test CoatingsExposed to weatheringDegree of flaking and peeling AS/NZS 1580.481.1.11:1998 Paints and related materialsMethods of test CoatingsExposed to weatheringDegree of chalking AS/NZS 1580.481.1.12:1998 Paints and related materialsMethods of test CoatingsExposed to weatheringDegree of colour change AS/NZS 1580.481.1.13:1998 Paints and related materialsMethods of test CoatingsExposed to weatheringDegree of fungal or algal growth AS 1580.481.32002 Paints and related materialsMethods of test CoatingsExposed to weatheringDegree of corrosion of coated metal substrates AS 1580.481.52004 Paints and related materialsMethods of test CoatingsDurability and resistance to foulingMarine underwater paint systems AS 1580.482.12006 Paints and related materialsMethods of test Determination of fastness to light of interior paint AS 1580.503.12006 Paints and related materialsMethods of test Determination of water by the Dean and Stark method AS 1580.504.12005 Paints and related materialsMethods of test- Metallic zinc content AS/NZS 1580.505.1:1996 Paints and related materialsMethods of test- pH of water-based paints AS/NZS 1580.601.1:1995 Paints and related materialsMethods of test ColourVisual comparison AS/NZS 1580.601.2:1994 Paints and related materialsMethods of test ColourPrinciples of colour measurement AS/NZS 1580.601.3:1994 Paints and related materialsMethods of test ColourMethods of colour measurement AS/NZS 1580.601.4:1994 Paints and related materialsMethods of test ColourCalculation of colour differences AS/NZS 1580.601.5:1994 Paints and related materialsMethods of test ColourCalculation of small colour differences using the CMC equation AS/NZS 1580.602.2:1995 Paints and related materialsMethods of testMeasurement of specular gloss of non-metallic paint films at 20, 60 and 85 AS 1580.603.12002 Paints and related materialsMethods of test- Finish General appearance AS 3730.02006 Guide to the properties of paints for buildingsGeneral information on the specification, purchasing and testing of paints AS 3730.12006 Guide to the properties of paints for buildingsLatex InteriorFlat AS 3730.22006 Guide to the properties of paints for buildingsLatex InteriorSemi-gloss AS 3730.32006 Guide to the properties of paints for buildingsLatex InteriorLow gloss AS 3730.52006 Guide to the properties of paints for buildingsSolventborneInteriorSemi-gloss AS 3730.62006 Guide to the properties of paints for buildingsSolventborneInterior/exteriorFull gloss enamel AS 3730.72006 Guide to the properties of paints for buildingsLatex ExteriorFlat AS 3730.82006 Guide to the properties of paints for buildingsLatex ExteriorLow-gloss AS 3730.92006 Guide to the properties of paints for buildingsLatex ExteriorSemi-gloss AS 3730.102006 Guide to the properties of paints for buildingsLatex ExteriorGloss AS 3730.122006 Guide to the properties of paints for buildingsLatex InteriorGloss AS 3730.132006 Guide to the properties of paints for buildingsPrimer WoodSolvent-borneInterior/exterior AS 3730.142006 Guide to the properties of paints for buildingsUndercoat Solvent-borneInterior/exterior AS 3730.152006 Guide to the properties of paints for buildingsPrimer LatexFor metallic zinc surfaces AS 3730.162006 Guide to the properties of paints for buildingsLatexSelfpriming timber finishExterior AS 3730.172006 Guide to the properties of paints for buildingsPrimer WoodLatexInterior/exterior AS 3730.182006 Guide to the properties of paints for buildings Undercoat/sealerLatexInterior/exterior AS 3730.212006 Guide to the properties of paints for buildingsPrimer Solvent-borneFor ferrous metallic surfaces AS 3730.222006 Guide to the properties of paints for buildingsConcrete and masonry sealerSolvent-borneInterior/exterior AS 3730.252006 Guide to the properties of paints for buildingsClear finishSolvent-borneInterior
AS 1580.302.12004 Paints and related materialsMethods of testPigment content AS/NZS 1580.401.1:1999 Paints and related materialsMethods of testSurface dry condition AS 1580.401.32002 Paints and related materialsMethods of test- Drying times using a BK-type recorder AS 1580.401.52002 Paints and related materialsMethods of test- Hard dry conditionSanding test AS 1580.401.62002 Paints and related materialsMethods of test- Hard dry condition (mechanical thumb test) AS/NZS 1580.401.8:1997 Paints and related materialsMethods of testNo-pick-up time of road marking paints AS 1580.402.12003 Paints and related materialsMethods of test- Bend test AS/NZS 1580.403.1:1999 Paints and related materialsMethods of testScratch resistance AS 1580.403.22006 Paints and related materialsMethods of test Abrasion resistance AS/NZS 1580.404.1:1997 Paints and related materialsMethods of testRecoating properties AS/NZS 1580.405.1:1996 Paints and related materialsMethods of testDetermination of pencil hardness of paint film AS 1580.406.12004 Paints and related materialsMethods of test Resistance to impactFalling weight test (Gardner-type tester) AS 1580.408.22004 Paints and related materialsMethods of test AdhesionKnife test AS 1580.408.42004 Paints and related materialsMethods of test Adhesion (crosscut) AS 1580.408.52006 Paints and related materialsMethods of test AdhesionPull-off test AS 1580.409.12002 Paints and related materialsMethods of test- Resistance to mudcracking AS 1580.409.22002 Paints and related materialsMethods of test- Low temperature coalescence AS 1580.409.32002 Paints and related materialsMethods of test- Blocking resistance of latex paint finishes AS 1580.410.12004 Paints and related materialsMethods of test- Cold check cycling AS 1580.452.12003 Paints and related materialsMethods of test- Resistance to humidity under condensation conditions AS 1580.452.22002 Paints and related materialsMethods of test- Resistance to corrosionSalt droplet test AS 1580.453.12003 Paints and related materialsMethods of test- Resistance to solvent immersion AS 1580.454.12002 Paints and related materialsMethods of test- Resistance to mineral oil and other organic liquids AS/NZS 1580.455.1:1997 Paints and related materialsMethods of testResistance to water at room temperature AS 1580.456.12004 Paints and related materialsMethods of test Resistance to boiling water AS/NZS 1580.457.1:1996 Paints and related materialsMethods of testResistance to natural weathering AS/NZS 1580.459.1:2000 Paints and related materialsMethods of testResistance to washing AS/NZS 1580.461.1:1995 Paints and related materialsMethods of testDetermination of resistance to yellowing (dark chamber) AS 1580.481.02003 Paints and related materialsMethods of test CoatingsGuide to assessing paint systems exposed to weathering conditions AS/NZS 1580.481.1.2:1998 Paints and related materialsMethods of test CoatingsExposed to weatheringDiscolouration (including bronzing) AS/NZS 1580.481.1.3:1998 Paints and related materialsMethods of test CoatingsExposed to weatheringDegree of dirt collection AS/NZS 1580.481.1.4:1998 Paints and related materialsMethods of test CoatingsExposed to weatheringDegree of dirt retention (after washing) AS/NZS 1580.481.1.5:1999 Paints and related materialsMethods of test CoatingsExposed to weatheringChange in gloss AS/NZS 1580.481.1.6:1998 Paints and related materialsMethods of test CoatingsExposed to weatheringDegree of erosion AS/NZS 1580.481.1.7:1998 Paints and related materialsMethods of test CoatingsExposed to weatheringDegree of checking AS/NZS 1580.481.1.8:1998 Paints and related materialsMethods of test CoatingsExposed to weatheringDegree of cracking AS/NZS 1580.481.1.9:1998 Paints and related materialsMethods of test CoatingsExposed to weatheringDegree of blistering
388
SUBJECT INDEX
AS 3730.272006 Guide to the properties of paints for buildingsClear coatings for interior timber floors AS 3730.282006 Guide to the properties of paints for buildingsWood stainSolvent-borneExterior AS 3730.292006 Guide to the properties of paints for buildingsSolventborneExterior/interiorPaving paint AS 3730.1002006 Guide to the properties of paints for buildings Introduction and list of guides AS/NZS 3750.0:2008 Paints for steel structuresIntroduction and list of Standards AS/NZS 3750.1:2008 Paints for steel structuresEpoxy mastic (two-pack) For rusted steel AS/NZS 3750.2:2008 Paints for steel structuresUltra high-build paint AS/NZS 3750.3:2008 Paints for steel structuresHeat resistingExterior AS/NZS 3750.4:1994 Paints for steel structuresBitumen paint AS/NZS 3750.5:2008 Paints for steel structuresAcrylic full gloss (two-pack) AS/NZS 3750.6:1995 Paints for steel structuresFull gloss polyurethane (two-pack) AS/NZS 3750.7:1994 Paints for steel structuresAluminium paint AS/NZS 3750.8:1994 Paints for steel structuresVinyl paintsPrimer, highbuild and gloss AS/NZS 3750.9:1994 Paints for steel structuresOrganic zinc-rich primer AS 3750.102008 Paints for steel structuresFull gloss epoxy (two-pack) AS/NZS 3750.11:1996 Paints for steel structuresChlorinated rubberHighbuild and gloss AS/NZS 3750.12:1996 Paints for steel structuresAlkyd/micaceous iron oxide AS/NZS 3750.13:1997 Paints for steel structuresEpoxy primer (two pack) AS/NZS 3750.14:1997 Paints for steel structuresHigh-build epoxy (twopack) AS/NZS 3750.15:1998 Paints for steel structuresInorganic zinc silicate paint AS/NZS 3750.16:1998 Paints for steel structuresWaterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed steel AS/NZS 3750.17:1998 Paints for steel structuresEtch primers (single pack and two-pack) AS 3750.182002 Paints for steel structuresMoisture cure urethane (singlepack) systems AS/NZS 3750.19:2008 Paints for steel structuresMetal primerGeneral purpose AS/NZS 3750.20:2008 Paints for steel structuresAnticorrosive metal primerSolvent-borneLead and chromate free AS/NZS 3750.21:2008 Paints for steel structuresUndercoatSolvent-borne AS/NZS 3750.22:2008 Paints for steel structuresFull gloss enamel Solvent-borne AS/NZS 3750.23:2008 Paints for steel structuresSemi-gloss enamel Solvent-borne AS 4049.12005 Paints and related materialsPavement marking materials Solvent-borne paintFor use with surface applied glass beads AS 4049.22005 Paints and related materialsPavement marking materials Thermoplastic pavement marking materialsFor use with surface applied glass beads AS 4049.32005 Paints and related materialsPavement marking materials Waterborne paintFor use with surface applied glass beads AS 4049.42006 Paints and related materialsPavement marking materials High performance pavement marking systems AS 4049.52007 Paints and related materialsPavement marking materials Performance assessment of pavement markings HB 73.12005 Handbook of Australian Paint StandardsGeneral HB 73.22005 Handbook of Australian Paint StandardsTest methods HB 73.31995 Handbook of Australian Paint StandardsIndustrial paints HB 73.41995 Handbook of Australian Paint StandardsArchitectural paints PAPER AND BOARD AS/NZS 1301.001s:2002 Methods of test for pulp and paperBasic density of pulpwood AS/NZS 1301.002s:2004 Methods of test for pulp and paperPreparation of wood samples for chemical analysis AS/NZS 1301.004s:2007 Methods of test for pulp and paperSolubility of wood in boiling water AS/NZS 1301.010s:2007 Methods of test for pulp and paperDetermination of moisture in wood chips AS/NZS 1301.11s:2005 Methods of test for pulp and paperKlason lignin in wood and pulp AS/NZS 1301.012s:2003 Methods of test for pulp and paperOrganic solvent extractives in wood, pulp and paper
AS/NZS 1301.013rp:2007 Methods of test for pulp and paperSampling of wood chips for testing AS/NZS 1301.014rp:2002 Methods of test for pulp and paperSize classification of wood chips AS/NZS 1301.201s:2002 Methods of test for pulp and paperKappa number of pulp AS/NZS 1301.203s:2007 Methods of test for pulp and paperForming handsheets for physical testing of pulp AS/NZS 1301.206s:2002 Methods of test for pulp and paperFreeness of pulp AS/NZS 1301.207s:2007 Methods of test for pulp and paperDetermination of stock concentration AS/NZS 1301.208s:2007 Methods of test for pulp and paperPhysical testing of pulp handsheets AS/NZS 1301.209s:2003 Methods of test for pulp and paper (metric units) Laboratory processing of pulpPFI mill method AS/NZS 1301.210s:2002 Methods of test for pulp and paperAlkali solubility of pulp AS/NZS 1301.214s:2007 Methods of test for pulp and paperEquipment for preparation of handsheets AS/NZS 1301.215s:2007 Methods of test for pulp and paperRemoval of latency AS/NZS 1301.400s:1998 Methods of test for pulp and paperTearing resistance of paper AS/NZS 1301.403s:2006 Methods of test for pulp and paperBursting strength of paper AS/NZS 1301.404s:1998 Methods of test for pulp and paperTensile strength of paper and board (constant rate of loading method) AS/NZS 1301.405s2004 Methods of test for pulp and paperGrammage of non-creped paper and board AS/NZS 1301.407s:1997 Methods of test for pulp and paperRing crush test AS/NZS 1301.411s:2004 Methods of test for pulp and paperWater absorptiveness of paper and paperboard (Cobb test) AS/NZS 1301.414s:2006 Methods of test for pulp and paperConditioning of paper for testing AS/NZS 1301.415s:2008 Methods of test for pulp and paperStandard atmosphere for testing paper and board and procedure for monitoring the atmosphere AS 1301.417s1992 Methods of test for pulp and paperSampling paper, board and pulp for testing AS/NZS 1301.418s:1994 Methods of test for pulp and paperAsh content of wood, pulp, paper and board AS/NZS 1301.419s:2004 Methods of test for pulp and paperWater vapour transmission rate of paper AS/NZS 1301.420s:2006 Methods of test for pulp and paperGurley air permeance of paper (ISO 5636-5:2003 MOD) AS/NZS 1301.421:2008 Methods of test for pulp and paperDetermination of pH of aqueous extractsCold extraction method AS/NZS 1301.422s:2007 Methods of test for pulp and paperDetermination of the pH value of aqueous extracts of paper, board and pulpHot extraction method AS/NZS 1301.423:2008 Methods of test for pulp and paperFolding strength of paperKohler-Molin method AS/NZS 1301.424s:2006 Methods of test for pulp and paperDetermination of titanium dioxide in paper, paperboard, pigments and fillers AS/NZS 1301.426s:1994 Methods of test for pulp and paperDetermination of thickness and apparent bulk density or apparent sheet density AS/NZS 1301.429s:2002 Methods of test for pulp and paper (metric units) Flat crush resistance of corrugated board AS/NZS 1301.430s:2004 Methods of test for pulp and paperLiner adhesion of corrugated board AS/NZS 1301.434s:1997 Methods of test for pulp and paperCrush resistance of corrugating medium AS/NZS 1301.436s:2005 Methods of test for pulp and paperMeasurement of diffuse reflectance factor AS/NZS 1301.437s:2007 Methods of test for pulp and paperTensile strength of wetted paper and paperboard AS/NZS 1301.438s:1997 Methods of test for pulp and paperBursting strength of board AS/NZS 1301.439s:2007 Methods of test for pulp and paperBendtsen roughness of paper and paperboard AS 1301.440s1991 Methods of test for pulp and paperBendtsen air permeance of paper and board AS/NZS 1301.441s:1998 Methods of test for pulp and paperSheffield roughness of paper and board AS/NZS 1301.442s:1998 Methods of test for pulp and paperWater absorption of solid fibreboard (total immersion)
389
SUBJECT INDEX
Other paper products AS 22771994 Paper for MICR encoded documents Paper products in general AS 1157.71999 Methods of testing materials for resistance to fungal growthResistance of papers and paper products to surface fungal growth AS/NZS 1301.203s:2007 Methods of test for pulp and paper Forming handsheets for physical testing of pulp AS/NZS 1301.422s:2007 Methods of test for pulp and paper Determination of the pH value of aqueous extracts of paper, board and pulpHot extraction method PARTICLE SIZE ANALYSIS. SIEVING AS 11521993 Specification for test sieves AS 36381993 Test sieving procedures AS 4549.11999 Particle size analysisPhoton correlation spectroscopy AS 47842003 Sample preparation for particle size analysisDispersing procedures for powders in liquids AS 4816.12002 Determination of particle size distribution by gravitational liquid sedimentation methodsGeneral principles and guidelines AS 4863.12000 Particle size analysisLaser diffraction methodsGeneral Principles AS 4932.12001 Representation of results of particle size analysis Graphical representation AS 4932.22002 Representation of results of particle size analysis Calculation of average particle sizes/diameters and moments from particle size distributions AS 4932.42002 Representation of results of particle size analysis Characterization of a classification process AS 5009.12003 Determination of particle size distribution by centrifugal liquid sedimentation methodsGeneral principles and guidelines AS 5009.22003 Determination of particle size distribution by centrifugal liquid sedimentation methodsPhotocentrifuge method AS 50122003 Determination of particle size distributionsElectrical sensing zone method PASSENGER AND CABIN EQUIPMENT AS/NZS 4869.1:2006 Maritime Survivor Locating Systems (MSLS) Operating on 121.5 MHz PASSENGER CARS. CARAVANS AND LIGHT TRAILERS AS 12352000 Road vehiclesRoof load carriersRoof bars AS/NZS 3001:2008 Electrical installationsTransportable structures and vehicles including their site supplies AS/NZS 3001:2001 Electrical installationsRelocatable premises (including caravans and tents) and their site installations AS 4177.12004 Caravan and light trailer towing componentsTowbars and towing brackets AS 4177.22004 Caravan and light trailer towing components50 mm towballs AS 4177.32004 Caravan and light trailer towing componentsCoupling body for ball couplings AS 4177.42004 Caravan and light trailer towing componentsSafety chains up to 3500 kg capacity AS 4177.52004 Caravan and light trailer towing componentsElectrical connectors PEDOLOGY see SOIL QUALITY. PEDOLOGY PESTICIDES AND OTHER AGROCHEMICALS AS 24762008 General fumigation procedures Pesticides and other agrochemicals in general AS 17191994 Recommended common names for pesticides AS 25071998 The storage and handling of agricultural and veterinary chemicals AS 3660 (Set) Termite management AS 3660 Supplement 11993 Protection of buildings from subterranean termitesPrevention, detection and treatment of infestationCertificate of termiticide application (Supplement to AS 36601993) AS 3660 Supplement 21993 Protection of buildings from subterranean termitesPrevention, detection and treatment of infestationCertificate of completion (Supplement to AS 36601993) AS 3660.12000 Termite managementNew building work AS 3660.11995 Protection of buildings from subterranean termitesNew buildings AS 3660.22000 Termite managementIn and around existing buildings and structures AS 3660.32000 Termite managementAssessment criteria for termite management systems
AS/NZS 1301.443s:2005 Methods of test for pulp and paperBoiling water resistance of paperboard AS/NZS 1301.444s:2004 Methods of test for pulp and paperCorrugated fibreboardDetermination of edgewise crush resistance (Unwaxed edge method) (ISO3037:1994, MOD) AS/NZS 1301.445s:2006 Methods of test for pulp and paperHardness of corrugated board AS/NZS 1301.446s:2005 Methods of test for pulp and paperMeasurement of diffuse blue reflectance factor (brightness) of pulp, paper and paperboard AS/NZS 1301.447s:1998 Methods of test for pulp and paperSheffield air permeance of paper and board AS/NZS 1301.448s:2007 Methods of test for pulp and paperTensile strength of paper and paperboard (constant rate of elongation method) AS/NZS 1301.449s:1997 Methods of test for pulp and paperDescription of crush testing equipment AS/NZS 1301.453s:1998 Methods of test for pulp and paperBending resistance of paper and boardConstant rate of deflection AS/NZS 1301.454s:2006 Methods of test for pulp and paperDetermination of opacity (paper backing)Diffuse reflectance method AS/NZS 1301.455s:1993 Methods of test for pulp and paperColour measurement with a diff/0 geometry tristimulus reflectometer AS/NZS 1301.456s:2006 Methods of test for pulp and paperDetermination of conductivity of aqueous extracts of paper, board and pulps AS/NZS 1301.457s:2006 Methods of test for pulp and paperDetermination of moisture content in paper, board and pulps AS/NZS 1301.460s:2007 Methods of test for pulp and paperStatistical concepts used in pulp and paper testing AS/NZS 1301.462s:2005 Methods of test for pulp and paperMeasurement of diffuse blue reflectance factor (ISO brightness) of pulp, paper and paperboard AS/NZS 1301.464s:2005 Methods of test for pulp and paperEquipment for measurement of diffuse reflectance factor AS/NZS 1301.466s:2005 Methods of test for pulp and paperPreparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness) AS/NZS 1301.800s:2006 Methods of test for pulp and paperCompression resistance of fibreboard boxes (cases) AS/NZS 1301.204rp:2006 Methods of test for pulp and paperEstimation of dirt and shives in pulp AS/NZS 1301.402rp:2005 Methods of test for pulp and paperStatistical monitoring of test systems AS/NZS 1301.431rp:2006 Methods of test for pulp and paperTaber bending resistance of paper and paperboard AS/NZS 1301.450rp:2006 Methods of test for pulp and paperCompression strength of paper and boardShort span test AS/NZS 1301.451rp:2007 Methods of test for pulp and paperFibre furnish analysis AS/NZS 1301.452rp:2006 Methods of test for pulp and paperDetermination of weight factors by the comparison method AS/NZS 1301.458rp:2004 Methods of test for pulp and paperGlue bond strength of wetted corrugated fibreboard AS/NZS 1301.459rp:2006 Methods of test for pulp and paperZero-span wet tensile strength of pulp (ISO 15361:2000, MOD) AS 40031996 Permanent paper PAPER PRODUCTION PROCESSES AS/NZS 1301.203s:2007 Methods of test for pulp and paperForming handsheets for physical testing of pulp AS/NZS 1301.422s:2007 Methods of test for pulp and paperDetermination of the pH value of aqueous extracts of paper, board and pulpHot extraction method AS 40821992 Recycled paperGlossary of terms PAPER PRODUCTS Cardboard AS/NZS 1301.203s:2007 Methods of test for pulp and paper Forming handsheets for physical testing of pulp AS/NZS 1301.422s:2007 Methods of test for pulp and paper Determination of the pH value of aqueous extracts of paper, board and pulpHot extraction method Office paper AS 16121999 Paper sizes AS 27361999 Continuous forms used for information processing AS 46111999 Mailing envelopes AS P41968 Commercial forms AS P51969 Punching patterns for round holes used in files and loose leaf binders
390
SUBJECT INDEX
PETROLEUM PRODUCTS AND NATURAL GAS HANDLING EQUIPMENT AS 16972005 Installation and maintenance of steel pipe systems for gas AS 21171991 Hose and hose assemblies for petroleum and petroleum productsMarine suction and discharge AS/NZS 2229:2004 Fuel dispensing equipment for explosive atmospheres AS 25201981 Petroleum measurement tables AS 26492007 Petroleum liquids and liquefied petroleum gases MeasurementStandard reference conditions AS 26582008 LP GasPortable and mobile appliances AS 26582003 LP GasPortable and mobile appliances AS 26832000 Hose and hose assemblies for distribution of petroleum and petroleum products (excepting LPG) AS 27072002 Petroleum liquids and gasesFidelity and security of dynamic measurementCabled transmission of electric and/or electronic pulsed data AS 2885 Set2008 PipelinesGas and liquid petroleum Set AS 2885.02008 PipelinesGas and liquid petroleumGeneral requirements AS 2885.12007 PipelinesGas and liquid petroleumDesign and construction AS 2885.22007 PipelinesGas and liquid petroleumWelding AS 2885.32001 PipelinesGas and liquid petroleumOperation and maintenance AS 2885.42003 PipelinesGas and liquid petroleumOffshore submarine pipeline systems AS/NZS 2885.5:2002 Pipelines-Gas and liquid petroleumField pressure testing AS 37231989 Installation and maintenance of plastics pipe systems for gas AS 39612005 The storage and handling of liquefied natural gas AS 45512008 Domestic gas cooking appliances AS 45522005 Gas fired water heaters for hot water supply and/or central heating AS 45532008 Gas space heating appliances AS 45542005 Gas laundry dryers AS 45552002 (AG 1052002) Domestic gas refrigerators AS 45562000 (AG 1062000) Indirect gas-fired ducted air-heaters AS 45642005 Specification for general purpose natural gas AS 45662005 Flue cowlsGas appliances AS 46172004 Manual shut off gas valves AS 46182004 Gas appliance regulators AS 46192004 Gas appliance thermostats AS 46202004 Thermoelectric flame safeguards AS 46312005 Limited flexibility connectors for gas AS 46432007 Overhead radiant tube gas heaters AS 46452005 Gas distribution network management AS/NZS 4645.1:2008 Gas distribution networksNetwork management AS/NZS 4645.2:2008 Gas distribution networksSteel pipe systems AS/NZS 4645.3:2008 Gas distribution networksPlastics pipe systems AS 46462004 Gas appliance standardsDefinitions and calculations AS 48972008 The design, installation and operation of underground petroleum storage systems AS 49712008 Inspection and integrity monitoring of large steel vertical petroleum storage tanks AS 5601 (Set)2004 Gas installations Set AS 56012004 Gas installations AS 56012002 (AG 6012002) Gas installations AS ISO 6993.12007 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuelsPipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 6993-1:2006, MOD) AS ISO 6993.22007 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuelsFittings for a maximum operating pressure of 200 mbar (20 kPa) AS ISO 6993.32007 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuelsFittings and saddles for a maximum operating pressure of 1 bar (100 kPa) PLUMBING AND GAS SET2005 Plumbing and Gas Installations Set HB 1051998 Guide to pipeline risk assessment in accordance with AS 2885.1 AG 4041988 Approval requirements for LPG mobile industrial direct fired air heaters (incorporates Amendments) PETROLEUM PRODUCTS IN GENERAL AS 2106.02005 Methods for the determination of the flash point of flammable liquids (closed cup)General AS/NZS 2106.1:1999 Methods for the determination of the flash point of flammable liquids (closed cup)Abel closed cup method
AS 2106.22005 Methods for the determination of the flash point of flammable liquids (closed cup)Determination of flash pointPensky-Martens closed cup method AS 2106.32005 Methods for the determination of the flash point of flammable liquids (closed cup)Determination of flash/no flashRapid equilibrium closed cup method AS 2106.42005 Methods for the determination of the flash point of flammable liquids (closed cup)Determination of flash pointRapid equilibrium closed cup method AS 2106.52005 Methods for the determination of the flash point of flammable liquids (closed cup)Determination of flash/no flashClosed cup equilibrium method AS 2106.62005 Methods for the determination of the flash point of flammable liquids (closed cup)Determination of flash pointClosed cup equilibrium method AS 25852006 Determination of flash and fire pointsCleveland open cup method AS/NZS 4502.1:2006 Methods for evaluating clothing for protection against heat and fireEvaluation of thermal behaviour of materials and material assemblies when exposed to a source of radiant heat PHARMACEUTICS Other standards related to pharmaceutics AS 19521986 Dispensing measuresPharmaceuticalGlass AS 2224.11986 Medicine measures (including paediatric droppers)GlassFor general use AS 2224.21986 Medicine measures (including paediatric droppers)PlasticsFor domestic use AS 42731999 Design, installation and use of pharmaceutical isolators Pharmaceutics in general AS/NZS 4757:2002 Handling and destruction of drugs AS EN 12442.12003 Animal tissues and their derivatives utilized in the manufacture of medical devicesAnalysis and management of risk AS EN 12442.22003 Animal tissues and their derivatives utilized in the manufacture of medical devicesControls on sourcing, collection and handling AS EN 12442.32003 Animal tissues and their derivatives utilized in the manufacture of medical devicesValidation of the elimination and/or inactivation of viruses and transmissible agents Wound dressings and compresses AS 2835.11998 Absorbent woven gauzeCotton AS 2835.21998 Absorbent woven gauzeCotton-viscose blends AS 28692008 TamponsMenstrual AS/NZS 2869:1998 TamponsMenstrual PHOTOGRAPHY Photographic equipment. Projectors AS/NZS 3350.2.56:1998 Safety of household and similar electrical appliancesParticular requirementsProjectors and similar appliances AS/NZS 60335.2.56:2006 Household and similar electrical appliancesSafetyParticular requirements for projectors and similar appliances (IEC 60335-2-56 Ed 3, IDT) AS/NZS 60598.2.9:2006 LuminairesParticular requirements Photo and film luminaires (non-professional)(IEC60598-2-9, Ed. 2.0 (1987) MOD) Projectors see Photographic equipment. Projectors Radiographic films AS/NZS 3821:1998 Cassettes for medical X-ray diagnosis Radiographic cassettes and mammographic cassettes PHYSICAL PLANNING. TOWN PLANNING AS 1428 (Set)2003 Design for access and mobility Set AS 1428.12001 Design for access and mobilityGeneral requirements for accessNew building work AS 1428.11998 Design for access and mobilityGeneral requirements for accessNew building work AS 1428.21992 Design for access and mobilityEnhanced and additional requirementsBuildings and facilities AS 1428.31992 Design for access and mobilityRequirements for children and adolescents with physical disabilities AS/NZS 1428.4:2002 Design for access and mobilityTactile indicators AS 1428.41992 Design for access and mobilityTactile ground surface indicators for the orientation of people with vision impairment AS 20212000 AcousticsAircraft noise intrusionBuilding siting and construction
391
PHYSICS. CHEMISTRY
SUBJECT INDEX
AS 36812008 Application of polyethylene sleeving for ductile iron piping AS 43212001 Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings AS 47282005 Electric resistance welded steel pipe for pressure purposes ATS 5200.4732007 Technical Specification for plumbing and drainage productsStainless steel/nano-antibiotic PP-R pipe systems for water supply applications Metal fittings AS 15892001 Copper and copper alloy waste fittings AS 16311994 Cast grey and ductile iron non-pressure pipes and fittings AS/NZS 2280:2004 Ductile iron pipes and fittings AS/NZS 2544:1995 Grey iron pressure fittings AS 35172007 Capillary fittings of copper and copper alloy for nonpressure sanitary plumbing applications AS 36882005 Water supplyMetallic fittings and end connectors AS/NZS 3718:2005 Water supplyTap ware AS 48092003 Copper pipe and fittingsInstallation and commissioning Non-ferrous metal pipes AS 14322004 Copper tubes for plumbing, gasfitting and drainage applications AS 37951996 Copper alloy tubes for plumbing and drainage applications Pipeline components and pipelines in general AS 22002006 Design charts for water supply and sewerage AS 23681990 Test pumping of water wells AS/NZS 2566.1:1998 Buried flexible pipelinesStructural design AS/NZS 2566.1 Supplement 1:1998 Buried flexible pipelines Structural designCommentary (Supplement to AS/NZS 2566.1:1998) AS/NZS 2566.2:2002 Buried flexible pipelinesInstallation AS/NZS 3707:2001 Method for testing pressure cycling resistance of pipes and fittings AS/NZS 3718:2005 Water supplyTap ware AS/NZS 3725:2007 Design for installation of buried concrete pipes AS/NZS 3725 Supplement 1:2007 Design for installation of buried concrete pipesCommentary (Supplement to AS/NZS 3725:2007) AS 40412006 Pressure piping AS 41761994 Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications AS 44261997 Thermal insulation of pipework, ductwork and equipmentSelection, installation and finish AS 47992000 Installation of underground utility services and pipelines within railway boundaries AS 4827.12008 Coating defect surveys for buried pipelinesDirect current voltage gradient (DCVG) AS/NZS 4853:2000 Electrical hazards on metallic pipelines HB 1051998 Guide to pipeline risk assessment in accordance with AS 2885.1 MP 611992 Buried pipesGlossary of terms Pipes and fittings of other materials AS 17411991 Vitrified clay pipes and fittings with flexible joints Sewer quality AS/NZS 3499:2006 Water supplyFlexible hose assemblies AS/NZS 3499:1997 Flexible tube connectors for water supply AS/NZS 3725:2007 Design for installation of buried concrete pipes AS/NZS 3725 Supplement 1:2007 Design for installation of buried concrete pipesCommentary (Supplement to AS/NZS 3725:2007) AS/NZS 4058:2007 Precast concrete pipes (pressure and nonpressure) AS 40601992 Loads on buried vitrified clay pipes AS 4060 Supplement 11992 Loads on buried vitrified clay pipes Commentary (Supplement to AS 40601992) AS 41392003 Fibre reinforced concrete pipes and fittings Plastics fittings AS/NZS 1254:2002 PVC pipes and fittings for storm and surface water applications AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application
AS 36711989 AcousticsRoad traffic noise intrusionBuilding siting and construction AS 42991995 Adaptable housing PHYSICS. CHEMISTRY AS 1852.8811988 International electrotechnical vocabularyRadiology and radiological physics PIPELINE COMPONENTS AND PIPELINES Flanges, couplings and joints AS 21292000 Flanges for pipes, valves and fittings AS 24752001 Threaded hose connection fittings for bituminous materials AS 25371994 Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications AS/NZS 2642.3:2008 Polybutylene (PB) plumbing pipe systems Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications AS 40872004 Metallic flanges for waterworks purposes AS/NZS 4327:1995 Metal-banded flexible couplings for lowpressure applications AS/NZS 4331.1:1995 Metallic flangesSteel flanges AS/NZS 4331.2:1995 Metallic flangesCast iron flanges AS/NZS 4331.3:1995 Metallic flangesCopper alloy and composite flanges AS 50552006 Test method for the resistance of pipe joints to plant root intrusion AS 5082.22007 Polybutylene (PB) plumbing pipe systemsMetric seriesMechanical and fusion jointing systems ATS 5200.0422004 Technical Specification for plumbing and drainage productsRoll-grooved jointing systems AS ISO 96242008 Polyethylene (PE) pipes for fluids under pressureMating dimensions of flange adapters and loose backing flanges (ISO 9624:1997, MOD) Hoses and hose assemblies AS 12571973 Bore sizes, test pressures and tolerances on lengths of elastomeric hose AS 13351995 Hose and hose assemblies for welding, cutting and allied processes AS/NZS 1869:1996 Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas AS 22121979 Elastomeric hose and hose assemblies for transferring anhydrous ammonia AS 24351992 Elastomeric hose for railway air brakes AS/NZS 2554:1998 Hose and hose assemblies for air AS 25941983 Hose and hose assemblies for liquid chemicals AS 2620.11983 Domestic garden hoseReinforced hose AS 2620.21983 Domestic garden hoseUnreinforced hose AS 26601991 Hose and hose assembliesAir/waterFor underground coal mines AS 26832000 Hose and hose assemblies for distribution of petroleum and petroleum products (excepting LPG) AS 29022005 Medical gas systemsLow pressure flexible hose assemblies AS 37911991 Hydraulic hose ATS 5200.0332004 Technical Specification for plumbing and drainage productsSpraying apparatus/dispensing units with the option of chemical additionsHose connected AG 8071992 Approval requirements for natural gas flexible hose and hose assemblies for pressures above 2.6 MPa Iron and steel pipes AS 12812001 Cement mortar lining of steel pipes and fittings AS/NZS 1516:1994 The cement mortar lining of pipelines in situ AS/NZS 1518:2002 External extruded high-density-polyethylene coating system for pipes AS 15792001 Arc-welded steel pipes and fittings for water and waste-water AS 16311994 Cast grey and ductile iron non-pressure pipes and fittings AS 17611985 Helical lock-seam corrugated steel pipes AS 17621984 Helical lock-seam corrugated steel pipesDesign and installation AS/NZS 2041:1998 Buried corrugated metal structures AS/NZS 2280:2004 Ductile iron pipes and fittings AS 34951997 Authorization requirements for plumbing products Stainless steel non-pressure pipes and fittings AS 36802008 Polyethylene sleeving for ductile iron piping
392
SUBJECT INDEX
AS 12731991 Unplasticized PVC (UPVC) downpipe and fittings for rainwater AS/NZS 1477:2006 PVC pipes and fittings for pressure applications AS 2439.12007 Perforated plastics drainage and effluent pipe and fittingsPerforated drainage pipe and associated fittings AS 2439.22007 Perforated plastics drainage and effluent pipe and fittingsPerforated effluent pipe and associated fittings for sewerage applications AS 28871993 Plastic waste fittings AS 2888.02002 Methods of testing plastics waste fittings Introduction and list of methods AS 2888.12002 Methods of testing plastics waste fittingsMethod of determining the suitability of connection threads of BSP form AS 2888.22002 Methods of testing plastics waste fittingsMethod for determining dimensions AS 2888.32002 Methods of testing plastics waste fittingsMethod for pressure testing of plastics waste fittings AS 2888.42002 Methods of testing plastics waste fittingsMethod for air pressure/vacuum testing of plastics waste fittings AS 2888.52002 Methods of testing plastics waste fittingsTrap seal test AS 2888.62002 Methods of testing plastics waste fittingsMethod for load testing of plastics waste outlets AS 2888.72002 Methods of testing plastics waste fittingsMethod for testing the seal of plastrics waste outlets AS 2888.82002 Methods of testing plastics waste fittingsThermal cycling test AS 2888.92002 Methods of testing plastics waste fittingsMethod for determining residual stress in plastics waste fittings AS 2888.102002 Methods of testing plastics waste fittingsMethod for leak testing plastics pan connectors AS 2888.112002 Methods of testing plastics waste fittingsMethod for cyclic testing of plastics telescopic waste connectors (rubberring joint type) AS 2944.12007 Plastics pipes and fittings for gas reticulation Polyamide pipes AS 2944.22007 Plastics pipes and fittings for gas reticulation Polyamide fittings AS/NZS 3518:2004 Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications AS/NZS 4401:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polyethylene (PE) AS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications ATS 5200.4902007 Technical Specification for plumbing and drainage productsCross-linked polyethylene/aluminium/polyethylene-composite pipe systems for pressure applications AS ISO 6993.12007 Buried, high-impact poly(vinyl chloride) (PVCHI) piping systems for the supply of gaseous fuelsPipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 69931:2006, MOD) AS ISO 6993.22007 Buried, high-impact poly(vinyl chloride) (PVCHI) piping systems for the supply of gaseous fuelsFittings for a maximum operating pressure of 200 mbar (20 kPa) AS ISO 6993.32007 Buried, high-impact poly(vinyl chloride) (PVCHI) piping systems for the supply of gaseous fuelsFittings and saddles for a maximum operating pressure of 1 bar (100 kPa) Plastics pipes AS/NZS 1254:2002 PVC pipes and fittings for storm and surface water applications AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application AS 12731991 Unplasticized PVC (UPVC) downpipe and fittings for rainwater AS/NZS 1462.29:2006 Methods of test for plastics pipes and fittingsPlastics piping and ducting systemsDetermination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003, MOD) AS/NZS 1477:2006 PVC pipes and fittings for pressure applications AS/NZS 2032:2006 Installation of PVC pipe systems AS/NZS 2033:2008 Installation of polyethylene pipe systems AS 22371979 Plastics fuel and emission control tube
AS 2439.12007 Perforated plastics drainage and effluent pipe and fittingsPerforated drainage pipe and associated fittings AS 2439.22007 Perforated plastics drainage and effluent pipe and fittingsPerforated effluent pipe and associated fittings for sewerage applications AS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications AS 25371994 Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications AS/NZS 2642.1:2007 Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe extrusion compounds AS/NZS 2642.1:1994 Polybutylene pipe systemsPolybutylene (PB) pipe extrusion compounds AS/NZS 2642.2:2008 Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe for hot and cold water applications AS/NZS 2642.3:2008 Polybutylene (PB) plumbing pipe systems Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications AS 2698.22000 Plastics pipes and fittings for irrigation and rural applicationsPolyethylene rural pipe AS 2698.31990 Plastics pipes and fittings for irrigation and rural applicationsMechanical joint fittings for use with polyethylene micro-irrigation pipes AS 2944.12007 Plastics pipes and fittings for gas reticulation Polyamide pipes AS 2944.22007 Plastics pipes and fittings for gas reticulation Polyamide fittings AS/NZS 3518:2004 Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications AS 35711989 Glass filament reinforced thermosetting plastics (GRP) pipesPolyester basedWater supply, sewerage and drainage applications AS 36901989 Installation of ABS pipe systems AS 37231989 Installation and maintenance of plastics pipe systems for gas AS/NZS 4130:2003 Polyethylene (PE) pipes for pressure applications AS/NZS 4131:2003 Polyethylene (PE) compounds for pressure pipes and fittings AS/NZS 4401:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polyethylene (PE) AS/NZS 4441:2008 Oriented PVC (PVC-O) pipes for pressure applications AS/NZS 4645.3:2008 Gas distribution networksPlastics pipe systems AS/NZS 4765:2007 Modified PVC (PVC-M) pipes for pressure applications AS/NZS 4798(Int):2005 Polyethylene maintenance shafts AS/NZS 4999:2006 PVC-U maintenance shafts AS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications AS 5082.12007 Polybutylene (PB) plumbing pipe systemsMetric seriesMetric polybutylene (PB) pipes for hot and cold water applications AS 5082.22007 Polybutylene (PB) plumbing pipe systemsMetric seriesMechanical and fusion jointing systems ATS 5200.4902007 Technical Specification for plumbing and drainage productsCross-linked polyethylene/aluminium/polyethylene-composite pipe systems for pressure applications AS ISO 6993.12007 Buried, high-impact poly(vinyl chloride) (PVCHI) piping systems for the supply of gaseous fuelsPipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 69931:2006, MOD) AS ISO 6993.22007 Buried, high-impact poly(vinyl chloride) (PVCHI) piping systems for the supply of gaseous fuelsFittings for a maximum operating pressure of 200 mbar (20 kPa) AS ISO 6993.32007 Buried, high-impact poly(vinyl chloride) (PVCHI) piping systems for the supply of gaseous fuelsFittings and saddles for a maximum operating pressure of 1 bar (100 kPa) Seals for pipe and hose assemblies AS 681.12008 Elastomeric sealsMaterial requirements for pipe joint seals used in water and drainage applicationsVulcanized rubber AS 681.22008 Elastomeric sealsMaterial requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers
393
SUBJECT INDEX
Thermoplastic materials AS 13682000 PlasticsThermoplastic materialsDetermination of Vicat softening temperature (VST) AS 4828.22008 Degradability of plasticsMethods of test Determination of brittle point in plastic film using a tensile elongation test AS 4828.42008 Degradability of plasticsMethods of testTest method for heat aging of degradable plastics Thermosetting materials AS/NZS 4585.1:1999 Low styrene emission resinsDetermination of styrene evaporation from unsaturated polyester and vinyl ester resins AS/NZS 4585.2:1999 Low styrene emission resinsThe assessment of degree of interlaminar adhesion in unsaturated polyester and vinyl ester resinGlass fibre laminates POSTAL SERVICES AS/NZS 4253:1994 Mailboxes POTS see BOTTLES. POTS. JARS POWER TRANSMISSION AND DISTRIBUTION NETWORKS Control equipment for electric power systems AS 1852.3511978 International electrotechnical vocabulary Automatic control Other equipment related to power transmission and distribution networks AS 22091994 TimberPoles for overhead lines AS 2279.21991 Disturbances in mains supply networksLimitation of harmonics caused by industrial equipment AS 2279.41991 Disturbances in mains supply networksLimitation of voltage fluctuations caused by industrial equipment AS/NZS 4065:2000 Concrete utility services poles AS/NZS 4676:2000 Structural design requirements for utility services poles AS/NZS 4677:2000 Steel utility services poles AS/NZS 61000.3.6:2001 Electromagnetic compatibility (EMC) LimitsAssessment of emission limits for distorting loads in MV and HV power systems (IEC 61000-3-6:1996) AS/NZS 61000.3.7:2001 Electromagnetic compatibility (EMC) LimitsAssessment of emission limits for fluctuating loads in MV and HV power systems (IEC 61000-3-7:1996, MOD) AS 62310.12005 Static transfer systems (STS)General and safety requirements Power transmission and distribution lines AS/NZS 2344:1997 Limits of electromagnetic interference from overhead a.c. powerlines and high voltage equipment installations in the frequency range 0.15 to 1000 MHz AS 31242002 Approval and test specification for overhead line connector boxes AS 3891.12008 Air navigationCables and their supporting structuresMarking and safety requirementsPermanent marking of overhead cables and their supporting structures for other than planned low-level flying AS 3891.22008 Air navigationCables and their supporting structuresMarking and safety requirementsMarking of overhead cables for planned low-level flying operations AS IEC 607202007 Characteristics of line post insulators (IEC 60720, Ed. 1.0 (1981) MOD) AS/NZS 61534.1:2008 Powertrack systemsGeneral requirements (IEC 61534-1, Ed. 1 (2003) MOD) HB 871997 (CJC 1) Joint use of poles: The placement on poles of power lines and paired cable telecommunications lines HB 881997 (CJC 2) Unbalanced high voltage power lines: Code of practice for the mitigation of noise induced into paired cable telecommunications lines from unbalanced high voltage power lines HB 1002000 (CJC 4) Coordination of power and telecommunicationsManual for the establishment of safe work practices and the minimization of operational interference between power systems and paired cable telecommunications systems HB 1011997 (CJC 5) Coordination of power and telecommunicationsLow Frequency Induction (LFI): Code of practice for the mitigation of hazardous voltages induced into telecommunications lines HB 1021997 (CJC 6) Coordination of power and telecommunicationsLow Frequency Induction (LFI): Application Guide to the LFI Code
AS 681.32008 Elastomeric sealsMaterial requirements for pipe joint seals used in water and drainage applicationsCellular materials of vulcanized rubber AS 681.42008 Elastomeric sealsMaterial requirements for pipe joint seals used in water and drainage applicationsCast polyurethane sealing elements AS 16462007 Elastomeric seals for waterworks purposes AS 46232008 Jointing compounds and materials for use in gas pipe joints PLANTS AND EQUIPMENT FOR THE FOOD INDUSTRY AS/NZS 1389:1997 Acidic detergents for use in the dairying industry AS 13981998 Iodophors for use in the dairying industry AS/NZS 1400:1997 Heavy-duty alkaline detergents for 'in-place' cleaning in dairy factories AS 1528.12001 Tubes (stainless steel) and tube fittings for the food industryTubes AS 1528.22001 Tubes (stainless steel) and tube fittings for the food industryScrewed couplings AS 1528.32001 Tubes (stainless steel) and tube fittings for the food industryButt weld tube fittings AS 1528.42001 Tubes (stainless steel) and tube fittings for the food industryClamp liners with gaskets AS 18031998 General purpose detergents for use in the dairying industry AS 23361992 Meat industryHand-held knives AS 39932003 Equipment for the pasteurization of milk and other liquid dairy productsContinuous-flow systems AS 40271992 Food-service container dimensions AS 46742004 Construction and fit out of food premises AS 47092001 Guide to cleaning and sanitizing of plant and equipment in the food industry PLASTICS Plastics in general AS 1145.12001 Determination of tensile properties of plastics materialsGeneral principles AS 1145.22001 Determination of tensile properties of plastics materialsTest conditions for moulding and extrusion plastics AS 1145.32001 Determination of tensile properties of plastics materialsTest conditions for films and sheets AS 1145.42001 Determination of tensile properties of plastics materialsTest conditions for isotropic and orthotropic fibrereinforced plastic composites AS 1145.52001 Determination of tensile properties of plastics materialsTest conditions for fibre-reinforced plastic composites AS 1146.11990 Method for impact tests on plasticsIzod impact resistance AS 1146.21990 Methods for impact tests on plasticsCharpy impact resistance AS 1146.31990 Methods for impact tests on plasticsCalibration of the testing machine AS 1157.111999 Methods of testing materials for resistance to fungal growthResistance of rubbers and plastics to surface fungal growth AS 13272001 PlasticsStandard atmospheres for conditioning and testing AS 18861991 Glossary of terms relating to plastics AS 1886 Supplement 11994 Glossary of terms relating to plastics Plastics recycling terminology (Supplement to AS 18861991) AS/NZS 2433:1994 PlasticsMethod for exposure to ultraviolet lamps AS/NZS 3889:1993 Rubber and plasticsAnalysis of multi-peak traces obtained in determinations of tear strength and adhesion strength AS 47362006 Biodegradable plasticsBiodegradable plastics suitable for composting and other microbial treatment AS 4828.42008 Degradability of plasticsMethods of testTest method for heat aging of degradable plastics AS ISO 148522005 Plastic materialsDetermination of the ultimate aerobic biodegradability in an aqueous mediumMethod by analysis of evolved carbon dioxide AS ISO 148552005 Plastic materialsDetermination of the ultimate aerobic biodegradability and disintegration under controlled composting conditionsMethod by analysis of evolved carbon dioxide AS ISO 169292008 PlasticsDetermination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test (ISO 16929:2002, MOD)
394
SUBJECT INDEX
HB 1031997 (CJC 7) Coordination of power and telecommunicationsCrossings Code: The arrangement of overhead power and telecommunications lines, pole stay wires, and suspension wires Power transmission and distribution networks in general AS 1852.6011988 International electrotechnical vocabulary Generation, transmission and distribution of electricityGeneral AS 1852.6021988 International electrotechnical vocabulary Generation, transmission and distribution of electricity Generation AS 1852.6031988 International electrotechnical vocabulary Generation, transmission and distribution of electricityPower system planning and management AS 1852.6041988 International electrotechnical vocabulary Generation, transmission and distribution of electricity Operation AS/NZS 3835.1:2006 Earth potential riseProtection of telecommunications network users, personnel and plantCode of practice AS/NZS 3835.2:2006 Earth potential riseProtection of telecommunications network users, personnel and plantApplication guide AS 4509.11999 Stand-alone power systemsSafety requirements AS 4509.22002 Stand-alone power systemsSystem design guidelines AS 4509.31999 Stand-alone power systemsInstallation and maintenance AS/NZS 4665.1:2005 Performance of external power suppliesTest method and energy performance mark AS/NZS 4665.2:2005 Performance of external power supplies Minimum energy performance standard (MEPS) requirements HB 219:2006 Earth potential riseProtection of telecommunications network users, personnel and plantWorked examples for the application guide Substations. Surge arresters AS 1852.6051988 International electrotechnical vocabulary Generation, transmission and distribution of electricity Substations AS 40701992 Recommended practices for protection of lowvoltage electrical installations and equipment in MEN systems from transient overvoltages AS/NZS 4117:1999 Surge protective devices for telecommunication applications AS 62271.2022008 High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation Surge arresters see Substations. Surge arresters PRECISION MECHANICS AS 21402008 JewelleryFineness of precious metal alloys AS 23352008 Requirements for rolled gold and plated jewellery PREPACKAGED AND PREPARED FOODS AS 40271992 Food-service container dimensions PRINTING INKS see INKS. PRINTING INKS PROCESSES IN THE FOOD INDUSTRY AS 11622000 Cleaning and sanitizing dairy factory equipment AS 15362000 Cleaning and sanitizing milking equipment AS 1766.01995 Food microbiologyGeneral introduction and list of methods AS 1766.1.41991 Food microbiologyGeneral procedures and techniques Colony countSurface spread method AS 1766.1.51991 Food microbiologyGeneral procedures and techniques Colony countMembrane filtration method AS 1766.1.61991 Food microbiologyGeneral procedures and techniques Estimation of the most probable number (MPN) of microorganisms AS/NZS 1766.2.9:1997 Food microbiologyExamination for specific organismsVibrio parahaemolyticus AS/NZS 1766.2.15:1998 Food microbiologyExamination for specific organismsListeria monocytogenes in dairy products AS/NZS 1766.2.16.1:1998 Food microbiologyExamination for specific organismsFood and animal feeding stuffsHorizontal method for the detection and enumeration of Listeria monocytogenesDetection method AS 1766.3.11991 Food microbiologyExamination of specific products Meat and meat products other than poultry AS/NZS 1766.3.5:1999 Food microbiologyExamination of specific productsMolluscs, crustaceans and fish, and products thereof AS 1766.3.111991 Food microbiologyExamination of specific products Dairy productsTest for penicillin AS 1766.3.121992 Food microbiologyExamination of specific products Cultured dairy products
PRECISION MECHANICS
AS/NZS 1766.3.14:1998 Food microbiologyExamination of specific productsButter, margarine and related products AS 1766.3.151994 Food microbiologyExamination of specific products Cheese AS/NZS 1766.3.17:1997 Food microbiologyExamination of specific productsSweetened condensed milks AS 1766.51994 Food microbiologyPreparation of culture media, diluents and reagents AS/NZS 2541:1998 Guide to the cleaning-in-place of dairy factory equipment AS 39932003 Equipment for the pasteurization of milk and other liquid dairy productsContinuous-flow systems AS 44642007 Hygienic production of wild game meat for human consumption AS 44641998 Hygienic production of game meat for human consumption AS 44652006 Construction of premises and hygienic production of poultry meat for human consumption AS 44661998 Hygienic production of rabbit meat for human consumption AS 44671998 Hygienic production of crocodile meat for human consumption AS 46962007 Hygienic production and transportation of meat and meat products for human consumption AS 46962002 The hygienic production and transportation of meat and meat products for human consumption AS 47092001 Guide to cleaning and sanitizing of plant and equipment in the food industry AS 48412006 Hygienic production of pet meat AS 50082007 Hygienic rendering of animal products AS 50082001 Hygienic rendering of animal products AS 50102001 Hygienic production of ratite (emu/ostrich) meat for human consumption AS 50112001 Hygienic production of natural casings for human consumption AS 5013.12004 Food microbiologyExamination for specific organisms Standard plate count AS 5013.22007 Food microbiologyMicrobiology of food and animal feeding stuffsHorizontal method for the enumeration of Bacillus cereus Colony-count technique at 30C (ISO 7932:2004, MOD) AS 5013.32004 Food microbiologyMicrobiologyGeneral guidance for the enumeration of coliformsMost probable number technique AS 5013.42004 Food microbiologyMicrobiologyGeneral guidance for the enumeration of coliformsColony count technique AS 5013.52004 Food microbiologyMicrobiology of food and animal feeding stuffsHorizontal method for the enumeration of microorganisms Colony count technique at 30C AS 5013.62004 Food microbiologyExamination for specific organisms Campylobacter AS 5013.72004 Food microbiologyExamination of specific productsEggs and egg products AS 5013.82004 Food microbiologyMeat and meat productsDetection and enumeration of Enterobacteriaceae without resuscitationMPN technique and colony-count technique AS 5013.102004 Food microbiologyMicrobiology of food and animal feeding stuffsHorizontal method for the detection of Salmonella spp. AS 5013.11.12004 Food microbiology- Microbiology of food and animal feeding stuffsPreparation of test samples, initial suspension and decimal dilutions for microbiological examinationGeneral rules for the preparation of the initial suspension and decimal dilutions AS 5013.11.22006 Food microbiologyMicrobiology of food and animal feeding stuffsPreparation of test samples, initial suspension and decimal dilutions for microbiological examinationSpecific rules for the preparation of meat and meat products AS 5013.11.32006 Food microbiologyMicrobiology of food and animal feeding stuffsPreparation of test samples, initial suspension and decimal dilutions for microbiological examinationSpecific rules for the preparation of fish and fishery products AS 5013.11.42006 Food microbiologyMicrobiology of food and animal feeding stuffsPreparation of test samples, initial suspension and decimal dilutions for microbiological examinationSpecific rules for the preparation of products other than milk and milk products, meat and meat products and fish and fishery products AS 5013.12.12004 Food microbiology- Microbiology of food and animal feeding stuffsHorizontal method for the enumeration of coagulasepositive staphylococci (Staphylococcus aureus and other species) Technique using Baird-Parker agar medium AS 5013.12.22004 Food microbiology- Microbiology of food and animal feeding stuffsHorizontal method for the enumeration of coagulasepositive staphylococci (Staphylococcus aureus and other species) Technique using rabbit plasma fibrinogen agar medium
395
SUBJECT INDEX
AS 37951996 Copper alloy tubes for plumbing and drainage applications AS 48092003 Copper pipe and fittingsInstallation and commissioning Lead, zinc and tin products AS 12421985 Zinc ingots AS 18041976 Soft lead sheet and strip AS 18121975 Lead ingot AS 18811986 Zinc alloysCasting ingots and castingsQuality requirements PRODUCTS OF THE CHEMICAL INDUSTRY Chemicals for industrial and domestic disinfection purposes AS 10872003 Sodium hypochlorite solutions for use in the dairying industry AS 11622000 Cleaning and sanitizing dairy factory equipment AS 13981998 Iodophors for use in the dairying industry AS 15362000 Cleaning and sanitizing milking equipment AS 23511985 Nappy sanitizers AS 47092001 Guide to cleaning and sanitizing of plant and equipment in the food industry Chemicals for purification of water AS/NZS 4609:1999 Specification for water disinfection tablets Iodine releasing Cosmetics. Toiletries AS 12231991 Industrial hand cleaners (petroleum solvent type) AS/NZS 2604:1998 Sunscreen productsEvaluation and classification AS/NZS 2604:1997 Sunscreen productsEvaluation and classification AS/NZS 2604:1993 Sunscreen productsEvaluation and classification Essential oils AS 21122003 Oil of sandalwood, [Santalum spicatum (R.Br) A.DC] AS 2113.11998 Oil of Australian eucalyptus70 to 75% cineole AS 2113.21998 Oil of Australian eucalyptus80 to 85% cineole AS 21142004 Oil of lavender (Lavandula angustifolia Mill.) AS 21162004 Oil of Eucalyptus citriodora Hook AS 2247.11999 Eucalyptus oil fractions1,8-Cineole (Eucalyptol) AS 2247.21999 Eucalyptus oil fractionsEucalyptus oil terpenes (phellandrene fraction) AS 22491999 Australian sandarac resin AS 23671990 Essential oilsOil of orange AS 27811999 Essential oilsOil of lemon AS 27821997 Oil of Melaleuca, terpinen-4-ol type (Tea Tree oil) AS 45501999 Essential oilsSampling AS 49412001 Oil of Backhousia citriodora, citral type (lemon myrtle oil) AS 5025.12002 Essential oilsGeneral guidance on chromatographic profilesPreparation of chromatographic profiles for presentation in Standards AS 5025.22002 Essential oilsGeneral guidance on chromatographic profilesUtilization of chromatographic profiles of samples of essential oils AS 50272002 Essential oilsAnalysis by gas chromatography on capillary columnsGeneral method AS 50282002 Oil of lavandin Grosso (Lavandula angustifolia Miller x Lavandula latifolia (L.f.) Medikus), French type AS 50292002 Oil of spike lavender (Lavandula latifolia (L.f.) Medikus), Spanish type AS 50302002 Oil of lavandin Abrial (Lavandula angustifolia Miller x Lavandula angustifolia Medikus), French type Explosives. Pyrotechnics and fireworks AS/NZS 1873.3:2003 Powder-actuated (PA) hand-held fastening toolsCharges AS 20922004 Pyrotechnic marine distress flares and signals for pleasure craft AS 2187.01998 ExplosivesStorage, transport and use Terminology AS 2187.11998 ExplosivesStorage, transport and useStorage AS 2187.22006 ExplosivesStorage and useUse of explosives AS 2187.31999 ExplosivesStorage, transport and use PyrotechnicsShopgoods fireworksDesign, performance and testing
AS 5013.12.32004 Food microbiology- Microbiology of food and animal feeding stuffsHorizontal method for the enumeration of coagulasepositive staphylococci (Staphylococcus aureus and other species) Detection and MPN technique for low numbers AS 5013.142004 Food microbiologyMicrobiology of food and animal feeding stuffsGeneral rules for microbiological examinations AS 5013.152006 Food microbiologyMicrobiology of food and animal feeding stuffsHorizontal method for the detection and enumeration of presumptive Escherichia coliMost probable number technique AS 5013.162006 Food microbiologyMicrobiology of food and animal feeding stuffsHorizontal method for the enumeration of Clostridium perfringensColony-count technique AS 5013.172004 Food microbiologyMilk and milk productsGeneral guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination AS 5013.202004 Food microbiologyPreparation of test samples for microbiological examinationPoultry and poultry products AS 5013.212004 Food microbiologyMeat and meat products Enumeration of Pseudomonas spp. AS 5013.222004 Food microbiologyMeat and meat products Enumeration of Brochothrix thermosphactaColony-count technique AS 5013.232004 Food microbiologyMicrobiology of food and animal feeding stuffsHorizontal method for the enumeration of psychrotrophic microorganisms AS/NZS ISO 15161:2003 Guidelines on the application of ISO 9001:2000 for the food and drink industry AS ISO 22000 Set2006 Food Safety Management Set AS ISO 220002005 Food safety management systemsRequirements for any organization in the food chain AS ISO 22004(Int)2006 Food safety management systemsGuidance on the application of AS ISO 220002005 HB 2242001 Handbook for microbiological testing in food premises PRODUCTS OF NON-FERROUS METALS Aluminium products AS/NZS 1734:1997 Aluminium and aluminium alloysFlat sheet, coiled sheet and plate AS/NZS 1865:1997 Aluminium and aluminium alloysDrawn wire, rod, bar and strip AS/NZS 1866:1997 Aluminium and aluminium alloysExtruded rod, bar, solid and hollow shapes AS/NZS 1867:1997 Aluminium and aluminium alloysDrawn tubes AS 18742000 Aluminium and aluminium alloysIngots and castings AS 2848.11998 Aluminium and aluminium alloysCompositions and designationsWrought products AS 39751991 Aluminium alloysIrrigation tube AS EN 500522008 Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear AS EN 500642008 Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear Copper products AS/NZS 1279:1996 Copper refinery shapes AS 14322004 Copper tubes for plumbing, gasfitting and drainage applications AS 15651996 Copper and copper alloysIngots and castings AS 15661997 Copper and copper alloysRolled flat products AS/NZS 1567:1997 Copper and copper alloysWrought rods, bars and sections AS/NZS 1568:1998 Copper and copper alloysForging stock and forgings AS 15691998 Copper and copper alloysSeamless tubes for heat exchangers AS/NZS 1571:1995 CopperSeamless tubes for airconditioning and refrigeration AS 15721998 Copper and copper alloysSeamless tubes for engineering purposes AS/NZS 1573:1995 Copper and copper alloysWire for engineering purposes AS/NZS 1574:1996 Copper and copper alloysWire for electrical purposes AS 15892001 Copper and copper alloy waste fittings AS 27382000 Copper and copper alloysCompositions and designations of refinery products, wrought products, ingots and castings AS/NZS 3718:2005 Water supplyTap ware
396
SUBJECT INDEX
AS 2187.41998 ExplosivesStorage, transport and use PyrotechnicsOutdoor displays Gases for industrial application AS 44842004 Gas cylinders for industrial, scientific, medical and refrigerant useLabelling and colour coding AS 50342005 Installation and use of inert gases for beverage dispensing Materials for aluminium production AS 2879.112004 AluminaGuide to reporting Al2O3 content of smelter-grade alumina Pyrotechnics and fireworks see Explosives. Pyrotechnics and fireworks Refrigerants and antifreezes AS/NZS 1677.1:1998 Refrigerating systemsRefrigerant classification AS 17311983 Frozen food retail cabinets AS 1731.12003 Refrigerated display cabinetsTerms and definitions AS 21082004 Engine coolants Type A and Type B for engine cooling systems AS/NZS 3823.1.1:1998 Performance of electrical appliances Airconditioners and heat pumps- Test MethodsNon-ducted airconditioners and heat pumpsTesting and rating for performance AS/NZS 3823.1.2:2001 Performance of electrical appliances Airconditioners and heat pumps- Test methodsDucted airconditioners and air-to-air heat pumpsTesting and rating for performance AS/NZS 3823.2:2005 Performance of electrical appliances Airconditioners and heat pumpsEnergy labelling and minimum energy performance standard (MEPS) requirements AS/NZS 3823.3:2002 Performance of electrical appliances Airconditioners and heat pumpsCalculation of performance for minimum energy performance standard (MEPS) requirements AS/NZS 4474.1:2007 Performance of household electrical appliancesRefrigerating appliancesEnergy consumption and performance AS/NZS 4474.1:1997 Performance of household electrical appliancesRefrigerating appliancesEnergy consumption and performance AS/NZS 4474.2:2001 Performance of household electrical appliancesRefrigerating appliancesEnergy labelling and minimum energy standard requirements AS/NZS 4776.2:2008 Liquid-chilling packages using the vapour compression cycleMinimum energy performance standard (MEPS) and compliance requirements REFRIGERATION AND AIRCONDITIONING SET 2007 Refrigeration and airconditioning Set HB 40 Set2005 Australian Refrigeration and Air-conditioning Code of Good Practice Set HB 40.12001 The Australian Refrigeration and Air-conditioning Code of Good PracticeReduction of emissions of fluorocarbon refrigerants in commercial and industrial refrigeration and airconditioning applications HB 40.22001 The Australian Refrigeration and Air-conditioning Code of Good PracticeReduction of emissions of fluorocarbons in residential air-conditioning applications HB 40.32001 The Australian Refrigeration and Air-conditioning Code of Good PracticeReduction of emissions of fluorocarbons in domestic refrigeration applications HB 2762004 A Guide to Good Practice for Energy Efficient Installation of Residential Heating, Cooling & Air Conditioning Plant & Equipment Surface active agents AS/NZS 1389:1997 Acidic detergents for use in the dairying industry AS/NZS 1400:1997 Heavy-duty alkaline detergents for 'in-place' cleaning in dairy factories AS 18031998 General purpose detergents for use in the dairying industry AS 38671991 The qualitative identification of surfactant components in detergents AS 40101992 Analysis of detergents Toiletries see Cosmetics. Toiletries Wood-protecting chemicals AS 1604.12005 Specification for preservative treatmentSawn and round timber
AS/NZS 1604.2:2004 Specification for preservative treatment Reconstituted wood-based products AS/NZS 1604.3:2004 Specification for preservative treatment Plywood AS/NZS 1604.4:2004 Specification for preservative treatment Laminated veneer lumber (LVL) AS/NZS 1604.5:2005 Specification for preservative treatment Glued laminated timber products AS/NZS 1605.1:2006 Methods for sampling and analysing timber preservatives and preservative-treated timberGeneral requirements, sampling, and determination of sapwood and heartwood presence AS/NZS 1605.2:2006 Methods for sampling and analysing timber preservatives and preservative-treated timberDetermination of preservative penetration by spot tests AS/NZS 1605.3:2006 Methods for sampling and analysing timber preservatives and preservative-treated timberAnalysis methods for determination of preservative retention AS/NZS 1605.4:2006 Methods for sampling and analysing timber preservatives and preservative-treated timberAnalysis methods for determination of preservative solution concentration AS 56052007 Guide to the safe use of preservative-treated timber AS 5605 Supplement 12007 Guide to the safe use of preservativetreated timberConsumer safety information sheetCopper chromium arsenic(CCA)-treated timber AS 5605 Supplement 22007 Guide to the safe use of preservativetreated timberConsumer Safety Information SheetAlkaline copper quaternary(ACQ)-treated timber AS 5605 Supplement 32007 Guide to the safe use of preservativetreated timberConsumer Safety Information SheetCopper azole-treated timber AS 5605 Supplement 42007 Guide to the safe use of preservativetreated timberConsumer Safety Information Sheet Light oil/organic solvent-borne preservative (LOSP)-treated timber AS 5605 Supplement 52007 Guide to the safe use of preservativetreated timberConsumer Safety Information SheetCreosote or pigment-emulsified creosote (PEC)-treated timber AS 5605 Supplement 62007 Guide to the safe use of preservativetreated timberConsumer Safety Information SheetBifenthrintreated timber HB 1642002 Wood and wood preservationA complete guide to the AS/NZS 1604 Standards Series PRODUCTS OF THE TEXTILE INDUSTRY AS 10831971 Glossary of terms for defects in woven and knitted textile piece goods Coated fabrics AS 1157.41999 Methods of testing materials for resistance to fungal growthResistance of coated fabrics and electronic boards to fungal growth AS 29301987 TextilesCoated fabrics for tarpaulins AS 35201988 TextilesTarpaulins AS 4877.32001 Rubber- or plastics-coated fabricsSpecification for polyurethane-coated woven fabrics AS 4878.22001 Methods of test for coated fabricsDetermination of length, width and net mass AS 4878.32001 Methods of test for coated fabricsDetermination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate AS 4878.42001 Methods of test for coated fabricsDetermination of thickness AS 4878.52001 Methods of test for coated fabricsDetermination of bursting strength AS 4878.62001 Methods of test for coated fabricsDetermination of tensile strength and elongation at break AS 4878.72001 Methods of test for coated fabricsDetermination of tear resistance AS 4878.82001 Methods of test for coated fabricsDetermination of coating adhesion AS 4878.92001 Methods of test for coated fabricsDetermination of resistance to damage by flexing AS 4878.112001 Methods of test for coated fabricsDetermination of blocking resistance Geotextiles AS 37042005 GeosyntheticsGlossary of terms AS 37052003 GeotextilesIdentification, marking, and general data AS 3706.02003 GeotextilesMethods of testGeneral introduction and list of methods
397
SUBJECT INDEX
AS/NZS 2111.0:1996 Textile floor coveringsTests and measurementsIntroduction and list of methods AS/NZS 2111.1:1996 Textile floor coveringsTests and measurementsMachine-made textile floor coveringsDetermination of total thickness AS/NZS 2111.2:1996 Textile floor coveringsTests and measurementsDetermination of thickness loss under dynamic loading AS/NZS 2111.3:1996 Textile floor coveringsTests and measurementsDetermination of mass per unit area AS/NZS 2111.4:1996 Textile floor coveringsTests and measurementsDetermination of surface pile mass above the substrate AS/NZS 2111.5:1996 Textile floor coveringsTests and measurementsDetermination of thickness of pile above the substrate AS/NZS 2111.6:1996 Textile floor coveringsTests and measurementsDetermination of tuft length of pile AS/NZS 2111.7:1996 Textile floor coveringsTests and measurementsDetermination of loop length of pile AS/NZS 2111.9:1996 Textile floor coveringsTests and measurementsDetermination of the number of tufts per unit length and per unit area AS/NZS 2111.11:1996 Textile floor coveringsTests and measurementsDetermination of total pile mass per unit area by complete dissection AS/NZS 2111.13:1996 Textile floor coveringsTests and measurementsDetermination of thickness loss after brief, moderate static loading AS/NZS 2111.14:1996 Textile floor coveringsTests and measurementsDetermination of thickness loss after prolonged, heavy static loading AS/NZS 2111.15:1996 Textile floor coveringsTests and measurementsDetermination of tuft withdrawal force AS/NZS 2111.16:1996 Textile floor coveringsTests and measurementsDetermination of bond strength between backing components AS/NZS 2111.17:1996 Textile floor coveringsTests and measurementsDetermination of thickness, compression and recovery characteristics AS/NZS 2111.18:1997 Textile floor coveringsTests and measurementsBurning behaviourTablet test at ambient temperature AS/NZS 2111.19.1:1996 Textile floor coveringsTests and measurementsColourfastness testsRubbing AS/NZS 2111.19.2:1996 Textile floor coveringsTests and measurementsColourfastness testsShampoo solution AS/NZS 2111.20:1996 Textile floor coveringsTests and measurementsRectangular textile floor coveringsDetermination of dimensions AS/NZS 2111.21:1996 Textile floor coveringsTests and measurementsNon-destructive measurements of pile thickness above the backingWRONZ gauge method AS/NZS 2119:1997 Textile floor coveringsMachine-made Sampling and cutting specimens for physical tests AS 24041980 Textile floor coveringsFire propagation of the usesurface using a small ignition source AS 24542007 Textile floor coveringsTerminology AS/NZS 2455.1:2007 Textile floor coveringsInstallation practice General AS/NZS 2455.2:2007 Textile floor coveringsInstallation practice Carpet tiles AS/NZS 2914:2007 Textile floor coveringsInformative labelling AS/NZS 3733:1995 Textile floor coveringsCleaning maintenance of residential and commercial carpeting AS 42882003 Soft underlays for textile floor coverings AS 42881999 Soft underlays for textile floor coverings AS 4693.82004 Surfaces for sports areasMethods of test Procedure for the preparation of synthetic turf and textile test pieces AS ISO 9239.12003 Reaction to fire tests for floor coverings Determination of the burning behaviour using a radiant heat source FLOOR SET2008 Flooring Standards Set Textiles in general AS 1157.21998 Methods of testing materials for resistance to fungal growthResistance of textiles to fungal growth AS/NZS 1957:1998 TextilesCare labelling AS 2001.11995 Methods of test for textilesConditioning procedures
AS 3706.12003 GeotextilesMethods of testGeneral requirements, sampling, conditioning, basic physical properties and statistical analysis AS 3706.22000 GeotextilesMethods of testDetermination of tensile propertiesWide-strip method AS 3706.32000 GeotextilesMethods of testDetermination of tearing strengthTrapezoidal method AS 3706.42001 GeotextilesMethods of testDetermination of burst strengthCalifornia bearing ratio (CBR)Plunger method AS 3706.52000 GeotextilesMethods of testDetermination of puncture resistanceDrop cone method AS 3706.62000 GeotextilesMethods of testDetermination of seam strength AS 3706.72003 GeotextilesMethods of testDetermination of pore-size distributionDry-sieving method AS 3706.92001 GeotextilesMethods of testDetermination of permittivity, permeability and flow rate AS 3706.10.12001 GeotextilesMethods of testDetermination of transmissivityRadial method AS 3706.112004 GeotextilesMethods of testDetermination of durabilityResistance to degradation by light, heat and moisture AS 3706.122001 GeotextilesMethods of testDetermination of durabilityResistance to degradation by hydrocarbons or chemical reagents AS 3706.132000 GeotextilesMethods of testDetermination of durabilityResistance to certain microbiological agents HB 1542002 GeosyntheticsGuidelines on durability Ropes AS 4142.11993 Fibre ropesCare and safe usage AS 4142.21993 Fibre ropesThree-strand hawser-laid and eightstrand plaited AS 4142.31993 Fibre ropesMan-made fibre rope for static life rescue lines AS 4143.11993 Methods of test for fibre ropesDimensions, linear density, breaking force and elongation AS 4143.21993 Methods of test for fibre ropesKnotability and knot breaking force AS 4143.31993 Methods of test for fibre ropesSheath slippage AS 4143.41993 Methods of test for fibre ropesImpact strength index AS 4143.51993 Methods of test for fibre ropesResistance to flexion and surface abrasion AS 4143.61996 Methods of test for fibre ropesResistance to abrasion AS/NZS 4345:2001 Motor vehiclesCargo restraint systems Transport fibre rope Textile fabrics AS 1287.21972 Methods for the determination of dimensional change in fabricsRelaxation in steam AS 18181976 Flax canvas, including water-bag canvas AS 2001.2.222006 Methods of test for textilesPhysical tests Determination of yarn slippage in woven fabric at a standard stitched seam AS 2663.11997 TextilesWoven and knitted fabrics for window furnishingsUncoated fabrics AS 2663.21999 TextilesFabrics for window furnishingsCoated curtain fabrics AS 2663.31999 TextilesFabrics for window furnishingsVertical and holland blinds AS 26871997 TextilesUpholstery fabrics for domestic and commercial use (excluding face-coated fabrics) AS 2755.11985 Textile fabricsBurning behaviourDetermination of ease of ignition of vertically oriented specimens AS 2755.21985 Textile fabricsBurning behaviourMeasurement of flame spread properties of vertically oriented specimens AS 2755.31988 Textile fabricsDetermination of burning behaviourDetermination of surface burning time AS 35671988 TextilesCloth, duckCotton and polyester/cotton AS 3789.102000 Textiles for health care facilities and institutions BlanketsCotton woven cellular blankets AS 41741994 Synthetic shadecloth AS/NZS 4286:1995 Single-service cloth towels AS 48432001 Synthetic weed blocking fabric Textile floor coverings AS/NZS 1385:2007 Textile floor coveringsMetric units and commercial tolerances for measurement
398
SUBJECT INDEX
AS/NZS 2001.1.2:1998 Methods of test for textilesGeneral Universal yarn count system (Tex System) AS 2001.2.11988 Methods of test for textilesPhysical tests Determination of mean fibre diameter of textile fibres by measurement of projected images AS 2001.2.3.12001 Methods of test for textilesPhysical tests Determination of maximum force and elongation at maximum force using the strip method AS 2001.2.3.22001 Methods of test for textilesPhysical tests Determination of maximum force using the grab method (ISO 13934-2:1999, MOD) AS 2001.2.41990 Methods of test for textilesPhysical tests Determination of bursting pressure of textile fabricsHydraulic diaphragm method AS 2001.2.51991 Methods of test for textilesPhysical tests Determination of the number of threads per unit length in woven fabric AS 2001.2.62001 Methods of test for textilesPhysical tests Determination of the number of wales and courses per unit length in knitted fabric AS 2001.2.71987 Methods of test for textilesPhysical tests Determination of breaking force and extension of yarns AS 2001.2.82001 Methods of test for textilesPhysical tests Determination of tear force of fabrics using the ballistic pendulum method (Elmendorf) AS 2001.2.91977 Methods of test for textilesPhysical tests Determination of stiffness of cloth AS 2001.2.101986 Methods of test for textilesPhysical tests Determination of the tear resistance of woven textile fabrics by the wing-rip method AS 2001.2.121987 Methods of test for textilesPhysical tests Determination of width of fabrics AS 2001.2.131987 Methods of test for textilesPhysical tests Determination of mass per unit area and mass per unit length of fabrics AS 2001.2.141987 Methods of test for textilesPhysical tests Determination of twist in yarns AS 2001.2.151989 Methods of test for textilesPhysical tests Determination of thickness of textile fabrics AS 2001.2.161987 Methods of test for textilesPhysical tests Determination of water repellency of textile surfacesSpray rating test AS 2001.2.171987 Methods of test for textilesPhysical tests Determination of resistance of fabrics to water penetration Hydrostatic pressure test AS 2001.2.181987 Methods of test for textilesPhysical tests Determination of resistance of fabrics to water penetration Cone test AS 2001.2.191988 Methods of test for textilesPhysical tests Determination of bursting force of textile fabricsBall burst method AS 2001.2.202004 Methods of test for textilesPhysical tests Determination of seam breaking force AS 2001.2.211989 Methods of test for textilesPhysical tests Determination of seam opening due to the application of force in the transverse direction AS 2001.2.222006 Methods of test for textilesPhysical tests Determination of yarn slippage in woven fabric at a standard stitched seam AS 2001.2.231990 Methods of test for textilesPhysical tests Determination of linear density of textile yarn from packages AS 2001.2.25.12006 Methods of test for textilesPhysical tests Determination of the abrasion resistance of fabrics by the Martindale methodMartindale abrasion testing apparatus AS 2001.2.25.22006 Methods of test for textilesPhysical tests Determination of the abrasion resistance of fabrics by the Martindale methodDetermination of specimen breakdown AS 2001.2.25.32006 Methods of test for textilesPhysical tests Determination of the abrasion resistance of fabrics by the Martindale methodDetermination of mass loss AS 2001.2.25.42006 Methods of test for textilesPhysical tests Determination of the abrasion resistance of fabrics by the Martindale methodAssessment of appearance change AS 2001.2.261990 Methods of test for textilesPhysical tests Determination of abrasion resistance of textile fabrics (flexing and abrasion method) AS 2001.2.271990 Methods of test for textilesPhysical tests Determination of abrasion resistance of textile fabrics (inflated diaphragm method)
AS 2001.2.281992 Methods of test for textilesPhysical tests Determination of abrasion resistance of textile fabrics (rotary platform, double-head method) AS 2001.2.301994 Methods of test for textilesPhysical tests Determination of abrasion resistance of coated textile fabrics (oscillatory cylinder method) AS 2001.2.341990 Methods of test for textilesPhysical tests Determination of permeability of fabrics AS 2001.3.11998 Methods of test for textilesChemical tests Determination of pH of aqueous extract AS 2001.3.31978 Methods of test for textilesChemical tests Determination of solubility of wool in alkali AS 2001.3.41995 Methods of test for textilesChemical tests Determination of solvent extractable matter AS 2001.3.62005 Methods of test for textilesChemical tests Determination of cuprammonium fluidity of cotton and cellulosic man-made fibres AS 2001.4.31995 Methods of test for textilesColourfastness testsDetermination of colourfastness to rubbing AS/NZS 2001.4.4:1998 Methods of test for textilesColourfastness testsDetermination of colourfastness to water spotting AS/NZS 2001.4.5:1998 Methods of test for textilesColourfastness testsDetermination of colourfastness to chlorinated swimming pool water AS 2001.4.61990 Methods of test for textilesColourfastness testsDetermination of colourfastness to hot pressing AS 2001.4.111982 Methods of test for textilesColourfastness testsDetermination of colourfastness to bleaching with sodium hypochlorite AS 2001.4.121981 Methods of test for textilesColourfastness testsDetermination of colourfastness to acid spotting AS 2001.4.152006 Methods of test for textilesColourfastness testsDetermination of colourfastness to washing AS 2001.4.161981 Methods of test for textilesColourfastness testsDetermination of colourfastness to dry cleaning solvents AS 2001.4.171980 Methods of test for textilesColourfastness testsDetermination of colourfastness to perspiration AS 2001.4.212006 Method of test for textilesColourfastness testsDetermination of colourfastness to light using an artificial light source (mercury vapour, tungsten filament, internally phosphor-coated lamp) AS 2001.4.221991 Methods of test for textilesColourfastness testsDetermination of colour change due to flat abrasion (frosting) of textile fabrics (screen wire method) AS 2001.4.231995 Methods of test for textilesColourfastness testsDetermination of colour change due to flat abrasion (frosting) of textile fabrics (emery method) AS 2001.4.A012004 Methods of test for textilesColourfastness testsGeneral principles of testing (ISO105-A01:1994, MOD) AS 2001.4.A022005 Methods of test for textilesColourfastness testsGrey scale for assessing change in colour AS 2001.4.A032005 Methods of test for textilesColourfastness testsGrey scale for assessing staining AS 2001.4.A042004 Methods of test for textilesColourfastness testsInstrumental assessment of the degree of staining of adjacent fabrics AS 2001.4.A052004 Method of test for textilesColourfastness testsInstrumental assessment of the change in colour for determination of grey scale rating AS 2001.4.B012005 Methods of test for textilesColourfastness testsDetermination of colourfastness to daylight of textile materials AS 2001.4.B022001 Methods of test for textilesColourfastness testsColourfastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:1994, MOD) AS 2001.4.E012001 Methods of test for textilesColourfastness testsColourfastness to water AS 2001.4.E022001 Methods of test for textilesColourfastness testsColourfastness to sea water AS 2001.4.E042005 Methods of test for textilesColourfastness testsDetermination of colourfastness to perspiration AS 2001.5.11987 Methods of test for textilesDimensional changeGeneral requirements AS 2001.5.21995 Methods of test for textilesDimensional changeDetermination of relaxation and hygral properties of woven fabrics AS 2001.5.31985 Methods of test for textilesDimensional changeDetermination of relaxation in aqueous solution
399
SUBJECT INDEX
HB 323 Set2007 Employment Screening Set HB 3242008 Lexicon of Key Terms used in Security PROTECTION AGAINST DANGEROUS GOODS AS 12162006 Class labels for dangerous goods AS/NZS 1596:2008 The storage and handling of LP Gas AS/NZS 1596:2002 The storage and handling of LP Gas AS/NZS 1596:1997 Storage and handling of LP Gas AS 1678.0.0.0012004 Emergency procedure guideTransport- Vehicle fire AS 1678.2.1.0012003 Emergency procedure guideTransport- Liquefied petroleum gas (LP Gas) AS 1678.2.1.0052004 Emergency procedure guideTransport- Ethylene oxide, pure or with nitrogen AS 1678.2.1.0102004 Emergency procedure guideTransport- Butadienes, inhibited AS 1678.2.2.0002003 Emergency procedure guideTransport- Oxygen, refrigerated liquid AS 1678.2.2.0021999 Emergency procedure guideTransportChlorine AS 1678.3.0.0152004 Emergency procedure guideTransport- Formaldehyde solution, flammable AS 1678.3.0.0212003 Emergency procedure guideTransport- Ethyl methyl ketone (Methyl ethyl ketone, MEK) AS 1678.3.0.0222003 Emergency procedure guideTransport- Acrylonitrile (inhibited) AS 1678.3.1.0012003 Emergency procedure guideTransport- Petrol (as cargo) AS 1678.3.1.0031998 Emergency procedure guideTransport- Carbon disulfide AS 1678.3.2.0012003 Emergency procedure guideTransport- Toluene AS 1678.3.2.0021998 Emergency procedure guideTransport- Xylenes AS 1678.4.2.0012005 Emergency procedure guideTransport- Aluminium alkyls and aluminium alkyl halides AS 1678.4.3.0021998 Emergency procedure guideTransport- Magnesium phosphide AS 1678.5.1.0021998 Emergency procedure guideTransport- Ammonium nitrate AS 1678.5.1.0042005 Emergency procedure guideTransport- Calcium hypochlorite AS 1678.5.1.0052003 Emergency procedure guideTransport- Hydrogen peroxide, aqueous solution AS 1678.6.0.0011998 Emergency procedure guideTransport- Aniline AS 1678.6.0.0021998 Emergency procedure guideTransport- Sodium cyanide, potassium cyanide AS 1678.6.0.0041998 Emergency procedure guideTransport- Phenol, cresols and cresylic acid AS 1678.6.0.0061998 Emergency procedure guideTransport- Toluene diisocyanate (TDI) AS 1678.6.0.0091998 Emergency procedure guideTransport- Cyanides, inorganic AS 1678.6.0.0101998 Emergency procedure guideTransport- Phenylmercuric compounds AS 1678.6.0.0111998 Emergency procedure guideTransport- Copperchrome-arsenic AS 1678.6.0.0131998 Emergency procedure guideTransport- Chloropicrin AS 1678.6.0.0141998 Emergency procedure guideTransport- Lead arsenates, lead arsenites AS 1678.6.0.0152004 Emergency procedure guideTransport- Beryllium powder and beryllium compound, N.O.S. AS 1678.6.0.0161998 Emergency procedure guideTransport- Selenates or selenites AS 1678.6.0.0171998 Emergency procedure guideTransport- Motor fuel anti-knock mixture AS 1678.6.1.0101998 Emergency procedure guideTransport- Arsenic acid, liquid; arsenic acid, solid AS 1678.6.1.0141998 Emergency procedure guideTransport- Ammonium thioglycolate AS 1678.6.1.0151998 Emergency procedure guideTransport- Sodium fluoride, potassium fluoride, ammonium fluoride AS 1678.6.1.0171998 Emergency procedure guideTransport- Cadmium compound AS 1678.8.0.0012003 Emergency procedure guideTransport- Hydrochloric acid AS 1678.8.0.0042003 Emergency procedure guideTransport- Hypochlorite solution
AS 2001.5.42005 Methods of test for textilesDimensional changeDomestic washing and drying procedures for textile testing (ISO6330:2000, MOD) AS 2001.5.41987 Methods of test for textilesDimensional changeDetermination of dimensional change in laundering of textile fabrics and garmentsAutomatic machine method AS 2001.5.61987 Methods of test for textilesDimensional changeDetermination of dimensional change of yarns and sewing threads AS 2001.5.71986 Methods of test for textilesDimensional changeDetermination of dimensional change on dry cleaning in perchloroethylene excluding finishingMachine method AS 2001.6.11980 Methods of test for textilesMiscellaneous tests Determination of the resistance of textiles to certain insect pests AS 2001.72005 Methods of test for textilesQuantitative analysis of fibre mixtures (BS4407:1988, MOD) AS/NZS 2621:1998 TextilesGuide to the selection of correct care labelling instructions from AS/NZS 1957 AS/NZS 2622:1996 Textile productsFibre content labelling AS 28591986 TextilesSeam typesClassification and terminology AS 28601986 TextilesStitch typesClassification and terminology AS 44701997 Fishing lineDetermination of breaking load HB 37.51995 Handbook of Australian fire StandardsTextiles Materials and products MP 631992 The Australian GarmentMarkSpecifications and procedures Yarns AS 1157.31999 Methods of testing materials for resistance to fungal growthResistance of cordage and yarns to fungal growth AS 35381988 TextilesMopsWet PROTECTION AGAINST CRIME AS 17252003 Chain-link fabric security fencing and gates AS/NZS 2201 Set:2008 Intruder alarm systems Set AS/NZS 2201.1:2007 Intruder alarm systemsClient's premisesDesign, installation, commissioning and maintenance AS 2201.22004 Intruder alarm systemsMonitoring centres AS 2201.31991 Intruder alarm systemsDetection devices for internal use AS 2201.41990 Intruder alarm systemsWire-free systems installed in client's premises AS/NZS 2201.5:2008 Intruder alarm systemsAlarm transmission systems AS/NZS 2343:1997 Bullet-resistant panels and elements AS/NZS 3016:2002 Electrical installationsElectric security fences AS 3555.12003 Building elementsTesting and rating for intruder resistanceIntruder-resistant panels AS/NZS 3749.1:2003 Intruder alarm systemsRoad vehiclesPerformance requirements AS/NZS 3749.2:1997 Intruder alarm systemsRoad vehiclesInstallation and maintenance AS/NZS 3809:1998 Safes and strongrooms AS/NZS 3810.0:1998 Safes and strongroomsMethods of testIntroduction and list of methods AS/NZS 3810.1:1998 Safes and strongroomsMethods of testTest for physical attack AS/NZS 3810.2:1998 Safes and strongroomsMethods of testTest for anchoring strength AS/NZS 3810.3:1998 Safes and strongroomsMethods of testTest for explosive resistance AS 44211996 Guards and patrols AS 4485.11997 Security for health care facilitiesGeneral requirements AS 4485.21997 Security for health care facilitiesProcedures guide AS/NZS 4601:1999 Vehicle immobilizers AS 4806 Set2008 CCTV Set AS 4806.12006 Closed circuit television (CCTV)Management and operation AS 4806.22006 Closed circuit television (CCTV)Application guidelines AS 4806.32006 Closed circuit television (CCTV)PAL signal timings and levels AS 4806.42008 Closed circuit television (CCTV)Remote video AS 48112006 Employment screening AS 50392008 Security screen doors and security window grilles AS 50402003 Installation of security screen doors and window grilles AS 50412003 Methods of testSecurity screen doors and window grilles AS 80012008 Fraud and corruption control HB 167:2006 Security risk management
400
SUBJECT INDEX
AS 1678.8.0.0052004 Emergency procedure guideTransport- Acetic anhydride AS 1678.8.0.0081998 Emergency procedure guideTransport- Hydrofluoric acid AS 1678.8.0.0092003 Emergency procedure guideTransport- Formaldehyde solution (with not less than 25% formaldehyde) AS 1678.9.0.0012005 Emergency procedure guideTransport- Polymeric beads, expandable AS 1678.10.0011998 Emergency procedure guideTransport- Pesticides AS 1678.2A12004 Emergency procedure guideTransportGroup text EPG for Class 2 substancesFlammable, compressed gas AS 1678.2C12004 Emergency procedure guideTransportGroup text EPGs for Class 2 substances Non-flammable, compressed gas AS 1678.2D11998 Emergency procedure guideTransportGroup text EPGs for Class 2 substancesCompressed and liquefied gases Aerosols AS 1678.2M12004 Emergency procedure guideTransportGroup text EPGs for Class 2 substancesCompressed and liquefied gasesMixed load of gases in cylinders AS 1678.3A12004 Emergency procedure guideTransportGroup text EPGs for Class 3 substancesFlammable liquids AS 1678.3C12004 Emergency procedure guideTransportGroup text EPGs for Class 3 substancesFlammable liquids of a lesser hazard AS 1678.4A12004 Emergency Producedure GuideTransportGroup text EPG for Class 4.1 substancesFlammable solids; substances liable to spontaneous combustion; and substances that in contact with water emit flammable gases AS 1678.5A12006 Emergency procedure guideTransportGroup text EPG for Class 5 substancesOxidizing agents AS 1678.5K12006 Emergency procedure guideTransportGroup text EPGs for Class 5 substancesOrganic peroxides AS 1678.5Q12006 Emergency procedure guideTransportGroup text EPGs for Class 5 substancesOrganic peroxides, temperature controlled AS 1678.8A12004 Emergency procedure guideTransportGroup text EPGs for Class 8 substancesCorrosive substances AS 16922006 Steel tanks for flammable and combustible liquids AS 18941997 The storage and handling of non-flammable cryogenic and refrigerated liquids AS 19402004 The storage and handling of flammable and combustible liquids AS 19401993 The storage and handling of flammable and combustible liquids AS/NZS 2022:2003 Anhydrous ammoniaStorage and handling AS 20221983 Anhydrous ammoniaStorage and handling (known as the SAA Anhydrous Ammonia Code) AS 2106.02005 Methods for the determination of the flash point of flammable liquids (closed cup)General AS/NZS 2106.1:1999 Methods for the determination of the flash point of flammable liquids (closed cup)Abel closed cup method AS 2106.22005 Methods for the determination of the flash point of flammable liquids (closed cup)Determination of flash pointPensky-Martens closed cup method AS 2106.32005 Methods for the determination of the flash point of flammable liquids (closed cup)Determination of flash/no flashRapid equilibrium closed cup method AS 2106.42005 Methods for the determination of the flash point of flammable liquids (closed cup)Determination of flash pointRapid equilibrium closed cup method AS 2106.52005 Methods for the determination of the flash point of flammable liquids (closed cup)Determination of flash/no flashClosed cup equilibrium method AS 2106.62005 Methods for the determination of the flash point of flammable liquids (closed cup)Determination of flash pointClosed cup equilibrium method AS/NZS 2243.10:2004 Safety in laboratoriesStorage of chemicals AS 24762008 General fumigation procedures AS 25071998 The storage and handling of agricultural and veterinary chemicals AS 2508.2.0072001 Safe storage and handling information card- Liquefied petroleum gas AS 2508.10.0012000 Safe storage and handling information card- Agricultural and veterinary chemicals (Packaged products only) AS 27142008 The storage and handling of organic peroxides AS 27141993 The storage and handling of hazardous chemical materials Class 5.2 substances (organic peroxides) AS 27911996 High-voltage switchgear and controlgearUse and handling of sulphur hexafluoride (SF6) in high-voltage switchgear and controlgear
AS 2809 Set2008 Road tank vehicles for dangerous goods Set AS 2809.12008 Road tank vehicles for dangerous goodsGeneral requirements for all road tank vehicles AS 2809.22008 Road tank vehicles for dangerous goodsRoad tank vehicles for flammable liquids AS 2809.32008 Road tank vehicles for dangerous goodsRoad tank vehicles for compressed liquefied gases AS 2809.42001 Road tank vehicles for dangerous goodsTankers for toxic and corrosive cargoes AS 2809.52001 Road tank vehicles for dangerous goodsTankers for bitumen-based products AS 2809.62001 Road tank vehicles for dangerous goodsTankers for cryogenic liquids AS/NZS 2927:2001 The storage and handling of liquefied chlorine gas AS 29311999 Selection and use of emergency procedure guides for the transport of dangerous goods AS 37802008 The storage and handling of corrosive substances AS 37801994 The storage and handling of corrosive substances AS/NZS 3833:2007 The storage and handling of mixed classes of dangerous goods, in packages and intermediate bulk containers AS 38462005 The handling and transport of dangerous cargoes in port areas AS 39612005 The storage and handling of liquefied natural gas AS/NZS 4081:2001 The storage and handling of liquid and liquefied polyfunctional isocyanates AS 43262008 The storage and handling of oxidizing agents AS 43322004 The storage and handling of gases in cylinders AS/NZS 4452:1997 The storage and handling of toxic substances AS 45642005 Specification for general purpose natural gas AS 46031999 Flashback arrestersSafety devices for use with fuel gases and oxygen or compressed air AS/NZS 4681:2000 The storage and handling of Class 9 (miscellaneous) dangerous goods and articles AS 47102001 Packages for chemicals not intended for access or contact with their contents by humans AS/NZS 4745:2004 Code of practice for handling combustible dusts AS 49762008 The removal and disposal of underground petroleum storage tanks AS 49772008 Petroleum productsPipeline, road tanker compartment and underground tank identification AS 49792008 Flammable and combustible liquidsPrecautions against electrostatic ignition during tank vehicle loading AS ISO 161012007 Transport packaging for dangerous goodsPlastics compatibility testing AS ISO 161032007 Transport packaging for dangerous goodsRecycled plastics material AS ISO 161042007 Transport packaging for dangerous goodsTest methods AS ISO 161062007 Transport packages for dangerous goodsDangerous goods packagings, intermediate bulk containers (IBCs) and large packagingsGuidelines for the application of ISO 9001 AS ISO 164672007 Transport packages for dangerous goodsTest methods for IBCs CD DANGER2006 Dangerous Goods CD HB 76 (SET 100)2004 Dangerous goodsInitial emergency response guide (100 copies) HB 76 (SET 1000)2004 Dangerous goodsInitial emergency response guide (1000 copies) HB 76 (SET 50)2004 Dangerous goodsInitial emergency response guide (50 copies) HB 76 (SET 500)2004 Dangerous goodsInitial emergency response guide (500 copies) HB 762004 Dangerous goodsInitial emergency response guide PROTECTION AGAINST ELECTRIC SHOCK. LIVE WORKING AS/NZS 1020:1995 The control of undesirable static electricity AS 1939 Supplement 11990 Degrees of protection provided by enclosures for electrical equipment (IP Code)Wallchart 1 (Supplement 1 to AS 19391990) AS 1939 Supplement 21990 Degrees of protection provided by enclosures for electrical equipment (IP Code)Wallchart 2 (Supplement 2 to AS 19391990) AS 22251994 Insulating gloves for electrical purposes AS/NZS 2500:2004 Guide to the safe use of electricity in patient care AS/NZS 2978:1995 Insulating mats for electrical purposes
401
SUBJECT INDEX
AS 1603.112001 Automatic fire detection and alarm systems Visual warning devices AS 1603.131998 Automatic fire detection and alarm systemsDuct sampling units AS 1603.142001 Automatic fire detection and alarm systems Point type carbon monoxide (CO) fire detectors AS 1603.152002 Automatic fire detection and alarm systems Remote indicators AS 1603.162002 Automatic fire detection and alarm systemsIn situ testers AS 16701986 Automatic fire detection and alarm systemsSystem design, installation, and commissioning AS 1670.12004 Fire detection, warning, control and intercom systemsSystem design, installation and commissioningFire AS 1670.11995 Fire detection, warning, control and intercom systemsSystem design, installation and commissioningFire AS 1670.21997 Fire detection, warning, control and intercom systemsSystem design, installation and commissioningLocal fire AS 1670.32004 Fire detection, warning, control and intercom systemsSystem design, installation and commissioningFire alarm monitoring AS 1670.31997 Fire detection, warning control and intercom systemsSystem, design, installation and commissioning Monitoring network performance AS 1670.42004 Fire detection, warning, control and intercom systemsSystem design, installation and commissioningSound systems and intercom systems for emergency purposes AS 1670.61997 Fire detection, warning, control and intercom systemsSystem design, installation and commissioningSmoke alarms AS/NZS 1841.1:2007 Portable fire extinguishersGeneral requirements AS/NZS 1841.2:2007 Portable fire extinguishersSpecific requirements for water type extinguishers AS/NZS 1841.3:2007 Portable fire extinguishersSpecific requirements for wet chemical type extinguishers AS/NZS 1841.4:2007 Portable fire extinguishersSpecific requirements for foam type extinguishers AS/NZS 1841.5:2007 Portable fire extinguishersSpecific requirements for powder type extinguishers AS/NZS 1841.6:2007 Portable fire extinguishersSpecific requirements for carbon dioxide type extinguishers AS/NZS 1841.7:2007 Portable fire extinguishersSpecific requirements for vaporizing liquid type extinguishers AS/NZS 1841.8:2007 Portable fire extinguishersSpecific requirements for non-rechargeable type extinguishers AS 1851 Set2005 Maintenance of fire protection systems and equipment Set AS 18512005 Maintenance of fire protection systems and equipment AS 1851.11995 Maintenance of fire protection equipment Portable fire extinguishers and fire blankets AS 1851.21995 Maintenance of fire protection equipmentFire hose reels AS 1851.31997 Maintenance of fire protection equipment Automatic fire sprinkler systems AS 1851.41992 Maintenance of fire protection equipmentFire hydrant installations AS 1851.51981 Maintenance of fire protection equipment Automatic smoke/heat venting systems AS 1851.61997 Maintenance of fire protection equipment Management procedures for maintaining the fire and smoke control features of air-handling systems AS 1851.71984 Maintenance of fire protection equipmentFireresistant doorsets AS 1851.81987 Maintenance of fire protection equipment Automatic fire detection and alarm systems AS 1851.8 Supplement 11990 Maintenance of fire protection equipmentAutomatic fire detection and alarm systemsSystem certificates and maintenance records (Supplement to AS 1851.81987) AS 1851.91997 Maintenance of fire protection equipmentDelivery lay flat fire hose AS 1851.101989 Maintenance of fire protection equipment Emergency warning and intercommunication systems AS 1851.111991 Maintenance of fire protection equipmentHalon 1301 total flooding systems
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (H) Set:2008 AS/NZS 3000, Wiring Rules (Hardbound) + Electrical Standards + FREE T-shirt AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS/NZS 3003:2003 Electrical installationsPatient treatment areas of hospitals and medical, dental practices and dialyzing locations AS/NZS 3017:2007 Electrical installationsVerification guidelines AS/NZS 3019:2007 Electrical installationsPeriodic verification AS/NZS 3551:2004 Technical management programs for medical devices AS/NZS 3760:2003 In-service safety inspection and testing of electrical equipment AS/NZS 3760:2001 In-service safety inspection and testing of electrical equipment AS/NZS 4249:1994 Electrical safety practicesFilm, video and television sites AS 4262.11995 Telecommunication overvoltagesProtection of persons AS 4262.21999 Telecommunication overvoltagesProtection of equipment AS/NZS 4510:1999 Isolated electrical supply systems for medical use AS 46222004 Electrical and electronic ignition devices for gas appliances AS 46242005 Combination controls for gas AS 46282005 Pressure and temperature limit devices for use with gas burners AS/NZS 4836:2001 Safe working on low-voltage electrical installations AS/NZS 5761:2005 In-service safety inspection and testingSecond-hand electrical equipment prior to sale AS/NZS 5762:2005 In-service safety inspection and testingRepaired electrical equipment AS/NZS 60479.1:2002 Effects of current on human beings and livestock General aspects AS/NZS 60479.2:2002 Effects of current on human beings and livestock Special aspects AS/NZS 60479.3:2002 Effects of current on human beings and livestock Effects of currents passing through the body of livestock AS 605292004 Degrees of protection provided by enclosures (IP Code) HB 941997 Electrical safety in the workplace TR 61340.5.12005 ElectrostaticsProtection of electronic devices from electrostatic phenomenaGeneral requirements TR 61340.5.22005 ElectrostaticsProtection of electronic devices from electrostatic phenomenaUser guide PROTECTION AGAINST EXCESSIVE PRESSURE AS 12712003 Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels AS 13582004 Bursting discs and bursting disc devicesApplication, selection and installation AS/NZS 4233.1:1999 High pressure water (hydro) jetting systems Guidelines for safe operation and maintenance AS/NZS 4233.2:1999 High pressure water (hydro) jetting systems Construction and performance AS 46322005 Over-pressure and under-pressure cut off devices ATS 5200.0522005 Technical Specification for plumbing and drainage productsMetallic-bodied inlet pressure control valves greater than DN50 PROTECTION AGAINST FIRE AS 7240.62006 Fire detection and alarm systemsCarbon monoxide fire detectors using electro-chemical cells AS 7240.72004 Fire detection and alarm systemsPoint-type smoke detectors using scattered light, transmitted light or ionization (ISO 72407:2003, MOD) AS 7240.132006 Fire detection and alarm systemsCompatibility assessment of system components AS 7240.212006 Fire detection and alarm systemsRouting equipment Fire protection AS 1603.11997 Automatic fire detection and alarm systemsHeat detectors AS 1603.21997 Automatic fire detection and alarm systemsPoint type smoke detectors AS 1603.31996 Automatic fire detection and alarm systemsHeat alarms AS 1603.51996 Automatic fire detection and alarm systems Manual call points AS 1603.71996 Automatic fire detection and alarm systems Optical beam smoke detectors AS 1603.81996 Automatic fire detection and alarm systemsMultipoint aspirated smoke detectors
402
SUBJECT INDEX
AS 1851.121995 Maintenance of fire protection equipment Gaseous fire extinguishing systems AS/NZS 1851.13:1995 Maintenance of fire protection equipment Wheeled fire extinguishers AS/NZS 1851.16:1997 Maintenance of fire protection equipment Pyrogen fire extinguishing aerosol systems AS 18901999 Thermally released links AS 2118.12006 Automatic fire sprinkler systemsGeneral systems AS 2118.11999 Automatic fire sprinkler systemsGeneral requirements AS 2118.11995 Automatic fire sprinkler systemsStandard AS 2118.21995 Automatic fire sprinkler systemsWall wetting sprinklers (Drenchers) AS 2118.31997 Automatic fire sprinkler systemsDeluge AS 2118.41995 Automatic fire sprinkler systemsResidential AS 2118.52008 Automatic fire sprinkler systemsHome fire sprinkler systems AS 2118.51995 Automatic fire sprinkler systemsDomestic AS 2118.61995 Automatic fire sprinkler systemsCombined sprinkler and hydrant AS 2118.81997 Automatic fire sprinkler systemsMinor modifications AS 2118.91995 Automatic fire sprinkler systemsPiping support and installation AS 2118.101995 Automatic fire sprinkler systemsApproval documentation AS 2362.12002 Fire detection, warning, control and intercom systemsMethods of testHeat sensitivity testing of types A, B, C and D heat detectors AS 2362.22002 Fire detection, warning, control and intercom systemsMethods of testHeat sensitivity testing of Type E heat detectors AS 2362.31990 Automatic fire detection and alarm systems Methods of test for actuating devicesRapid temperature rise test AS 2362.41993 Automatic fire detection and alarm systems Methods of test for actuating devicesVoltage stability test AS 2362.51990 Automatic fire detection and alarm systems Methods of test for actuating devicesInsulation resistance test AS 2362.61993 Automatic fire detection and alarm systems Methods of test for actuating devicesStatic discharge test AS 2362.71990 Automatic fire detection and alarm systems Methods of test for actuating devicesElectromagnetic interference test AS 2362.81990 Automatic fire detection and alarm systems Methods of test for actuating devicesImpulse voltage withstand test AS 2362.91990 Automatic fire detection and alarm systems Methods of test for actuating devicesHigh frequency disturbance test AS 2362.102002 Fire detection, warning, control and intercom systemsMethods of testLow temperature test AS 2362.112002 Fire detection, warning, control and intercom systemsMethods of testDamp heat test AS 2362.122002 Fire detection, warning, control and intercom systemsMethods of testDry heat test AS 2362.132002 Fire detection, warning, control and intercom systemsMethods of testCorrosion test AS 2362.141990 Automatic fire detection and alarm systems Methods of test for actuating devicesResistance to crushing test AS 2362.152002 Fire detection, warning, control and intercom systemsMethods of testVibration test AS 2362.162002 Fire detection, warning, control and intercom systemsMethods of testImpact test AS 2362.172001 Automatic fire detection and alarm systems Methods of test for actuating devicesSensitivity test AS 2362.182002 Fire detection, warning, control and intercom systemsMethods of testAir velocity stability test AS 2362.192002 Fire detection, warning, control and intercom systemsMethods of testDust test AS 2362.202002 Fire detection, warning, control and intercom systemsMethods of testOverload test AS 2362.212002 Fire detection, warning, control and intercom systemsMethods of testEndurance test AS 2362.222002 Fire detection, warning, control and intercom systemsMethods of testSound pressure level test
AS 2362.231990 Automatic fire detection and alarm systems Method of test for actuating devicesWeathering test AS 2362.242002 Fire detection, warning, control and intercom systemsMethods of testFrangibility test AS 2362.252004 Fire detection, warning, control and intercom systemsMethods of testIndicator visibility test AS 2362.262001 Automatic fire detection and alarm systems Methods of test for actuating devicesCarbon monoxide (CO) sensitivity test AS 2362.272001 Automatic fire detection and alarm systems Methods of test for actuating devicesCross sensitivity test AS 24272004 Smoke/heat release vents AS 2428.12004 Methods of testing smoke/heat release vents Determination of resistance to leakage during rain AS 2428.22004 Methods of testing smoke/heat release vents Determination of ability to operate under wind loading AS 2428.32004 Methods of testing smoke/heat release vents Determination of operating characteristics AS 2428.42004 Methods of testing smoke/heat release vents Determination of the effect of flame contact AS 2428.52004 Methods of testing smoke/heat release vents Determination of discharge coefficient and effective aerodynamic area AS 2428.62004 Methods of testing smoke/heat release vents Determination of ability to operate under snow loading AS 26652001 Smoke/heat venting systemsDesign, installation and commissioning AS 26651983 Smoke/heat venting systemsDesign, installation and commissioning AS 29412008 Fixed fire protection installationsPumpset systems AS 29412002 Fixed fire protection installationsPumpset systems AS 29411995 Fixed fire protection installationsPumpset systems AS 37861993 Smoke alarms AS 40781992 Fire protectionFire extinguishing mediaCarbon dioxide AS 4118.1.11996 Fire sprinkler systemsComponentsSprinklers and sprayers AS 4118.1.21996 Fire sprinkler systemsComponentsAlarm valves (wet) AS 4118.1.31995 Fire sprinkler systemsComponentsWater motor alarms AS 4118.1.41994 Fire sprinkler systemsComponentsValve monitors AS 4118.1.51996 Fire sprinkler systemsComponentsDeluge and pre-action valves AS 4118.1.61995 Fire sprinkler systemsComponentsStop valves and non-return valves AS 4118.1.71996 Fire sprinkler systemsComponentsAlarm valves (dry) AS 4118.1.81999 Fire sprinkler systemsComponentsPressurereducing valves AS 4118.2.11995 Fire sprinkler systemsPipingGeneral AS 43911999 Smoke management systemsHot smoke test AS 4418.22000 Supervisory control and data acquisition (SCADA)Generic telecommunications and interface protocol Fire alarm systems AS 4428.01997 Fire detection, warning, control and intercom systemsControl and indicating equipmentGeneral requirements and test methods AS 4428.11998 Fire detection, warning, control and intercom systemsControl and indicating equipmentFire AS 4428.32004 Fire detection, warning, control and intercom systemsControl and indicating equipmentFire brigade panel AS 4428.42004 Fire detection, warning, control and intercom systemsControl and indicating equipmentIntercommunication systems for emergency purposes AS 4428.51998 Fire detection, warning, control and intercom systemsControl and indicating equipmentPower supply units AS 4428.61997 Fire detection, warning, control and intercom systemsControl and indicating equipmentAlarm signalling equipment AS 4428.71999 Fire detection, warning, control and intercom systemsControl and indicating equipmentAir-handling fire mode control panel AS 4428.92006 Fire detection, warning, control and intercom systemsControl and indicating equipmentRequirements for wirefree alarm zone circuits
403
SUBJECT INDEX
AS 27921992 Fire hoseDelivery layflat AS/NZS 3504:2006 Fire blankets AS 3689.11989 Automatic fire extinguishing systems using halogenated hydrocarbonsHalon 1301 total flooding systems AS 3689.21991 Automatic fire extinguishing systems using halogenated hydrocarbonsMechanical components AS 42142002 Gaseous fire extinguishing systems AS 4215.01995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases General introduction and list of methods AS 4215.11995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases Determination of fire extinguishing concentrations AS 4215.21995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases Determination of fire inerting concentrations AS 42651995 Wheeled fire extinguishers AS/NZS 4353:1995 Portable fire extinguishersAerosol type AS/NZS 4487:1997 Pyrogen fire extinguishing aerosol systems AS 45871999 Water mist fire protection systemsSystem design, installation and commissioning HB 1472000 Sprinklers simplified Fire-resistance of building materials and elements AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structuresSimultaneous determination of ignitability, flame propagation, heat release and smoke release AS 1530.42005 Methods for fire tests on building materials, components and structuresFire-resistance test of elements of construction AS 1530.41997 Methods for fire tests on building materials, components and structuresFire-resistance tests of elements of building construction AS 1530.41990 Methods for fire tests on building materials, components and structuresFire-resistance tests of elements of building construction AS 1530.8.12007 Methods for fire tests on building materials, components and structuresTests on elements of construction for buildings exposed to simulated bushfire attackRadiant heat and small flaming sources AS 1530.8.22007 Methods for fire tests on building materials, components and structuresTests on elements of construction for buildings exposed to simulated bushfire attackLarge flaming sources AS 1682.11990 Fire dampersSpecification AS 1682.21990 Fire dampersInstallation AS 1905.12005 Components for the protection of openings in fireresistant wallsFire-resistant doorsets AS/NZS 1905.1:1997 Components for the protection of openings in fire-resistant wallsFire-resistant doorsets AS 1905.22005 Components for the protection of openings in fireresistant wallsFire-resistant roller shutters AS 1905.21989 Components for the protection of openings in fireresistant walls (known as the SAA Fire Door Code)Fireresistant roller shutters AS 3784.11990 Coatings for fire protection of building elements Guide to selection and installation of sprayed mineral coatings AS 4072.12005 Components for the protection of openings in fireresistant separating elementsService penetrations and control joints AS 4072.11992 Components for the protection of openings in fireresistant separating elementsService penetrations and control joints AS 69052007 Smoke doors AS ISO 97052003 Fire testsFull-scale room test for surface products Ignitability and burning behaviour of materials and products AS 1530.11994 Methods for fire tests on building materials, components and structuresCombustibility test for materials AS 1530.21993 Methods for fire tests on building materials, components and structuresTest for flammability of materials AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structuresSimultaneous determination of ignitability, flame propagation, heat release and smoke release AS 1530.31989 Methods for fire tests on building materials, components and structuresSimultaneous determination of ignitability, flame propagation, heat release and smoke release
AS 4428.101998 Fire detection, warning, control and intercom systemsControl and indicating equipmentAlarm investigation AS 46202004 Thermoelectric flame safeguards AS 50622006 Fire protection for mobile and transportable equipment ATS 5200.4862008 Technical Specification for plumbing and drainage productsSprinklers for home applications AS 7240.12007 Fire detection and alarm systemsGeneral and definitions AS 7240.22004 Fire detection and alarm systemsControl and indicating equipment (ISO 7240-2:2003, MOD) AS 7240.42004 Fire detection and alarm systemsPower supply equipment (ISO 7240-4:2003, MOD) AS 7240.52004 Fire detection and alarm systemsPoint type heat detectors (ISO7240-5:2003, MOD) AS 7240.62006 Fire detection and alarm systemsCarbon monoxide fire detectors using electro-chemical cells AS 7240.72004 Fire detection and alarm systemsPoint-type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2003, MOD) AS 7240.82007 Fire detection and alarm systemsCarbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor AS 7240.102007 Fire detection and alarm systemsPoint-type flame detectors AS 7240.112008 Fire detection and alarm systemsManual call points (ISO 7240-11:2005, MOD) AS 7240.122007 Fire detection and alarm systemsLine type smoke detectors using a transmitted optical beam AS 7240.132006 Fire detection and alarm systemsCompatibility assessment of system components AS 7240.152004 Fire detection and alarm systemsMultisensor fire detectors (ISO7240-15:2004,MOD) AS 7240.212006 Fire detection and alarm systemsRouting equipment AS 7240.222008 Fire detection and alarm systemsSmokedetection equipment for ducts (ISO 7240-22:2007, MOD) HB 1231999 Guidelines for the selection, location and installation of visual warning devices in buildings HB 2332008 Fire Protection Systems TestingWater Conservation Handbook CS FP 0021995 Fire ProtectionPortable Equipment Service Fire-fighting AS/NZS 1221:1997 Fire hose reels AS 12211991 Fire hose reels AS 16871991 Knapsack spray pumps for firefighting AS/NZS 1841.1:2007 Portable fire extinguishersGeneral requirements AS/NZS 1841.2:2007 Portable fire extinguishersSpecific requirements for water type extinguishers AS/NZS 1841.3:2007 Portable fire extinguishersSpecific requirements for wet chemical type extinguishers AS/NZS 1841.4:2007 Portable fire extinguishersSpecific requirements for foam type extinguishers AS/NZS 1841.5:2007 Portable fire extinguishersSpecific requirements for powder type extinguishers AS/NZS 1841.6:2007 Portable fire extinguishersSpecific requirements for carbon dioxide type extinguishers AS/NZS 1841.7:2007 Portable fire extinguishersSpecific requirements for vaporizing liquid type extinguishers AS/NZS 1841.8:2007 Portable fire extinguishersSpecific requirements for non-rechargeable type extinguishers AS/NZS 1850:1997 Portable fire extinguishersClassification, rating and performance testing AS 2419.12005 Fire hydrant installationsSystem design, installation and commissioning AS 2419.11994 Fire hydrant installationsSystem design, installation and commissioning AS 2419.21994 Fire hydrant installationsFire hydrant valves AS 2419.31996 Fire hydrant installationsFire brigade booster connections AS 24412005 Installation of fire hose reels AS 24442001 Portable fire extinguishers and fire blankets Selection and location AS 24441995 Portable fire extinguishers and fire blankets Selection and location
404
SUBJECT INDEX
AS 1530.42005 Methods for fire tests on building materials, components and structuresFire-resistance test of elements of construction AS 1530.41997 Methods for fire tests on building materials, components and structuresFire-resistance tests of elements of building construction AS 1530.41990 Methods for fire tests on building materials, components and structuresFire-resistance tests of elements of building construction AS 1530.72007 Methods for fire tests on building materials, components and structuresSmoke control assembliesAmbient and medium temperature leakage test procedure AS/NZS 1530.7:1998 Methods for fire tests on building materials, components and structuresSmoke control door and shutter assembliesAmbient and medium temperature leakage test procedure AS 1530.8.12007 Methods for fire tests on building materials, components and structuresTests on elements of construction for buildings exposed to simulated bushfire attackRadiant heat and small flaming sources AS 1530.8.22007 Methods for fire tests on building materials, components and structuresTests on elements of construction for buildings exposed to simulated bushfire attackLarge flaming sources AS/NZS 1660.5.1:2005 Test methods for electric cables, cords and conductorsFire testsTest for vertical flame spread of vertically-mounted bunched wires or cables AS/NZS 1660.5.2:2006 Test methods for electric cables, cords and conductorsFire testsMeasurement of smoke density of cables burning under defined conditions AS/NZS 1660.5.3:1998 Test methods for electric cables, cords and conductorsFire TestsDetermination of the amount of halogen acid gas evolved during the combustion of polymeric materials taken from cables AS/NZS 1660.5.4:1998 Test methods for electric cables, cords and conductorsFire testsDetermination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity AS/NZS 1660.5.5:2005 Test methods for electric cables, cords and conductors- Fire testsCircuit integrity AS/NZS 1660.5.6:2005 Test methods for electric cables, cords and conductorsFire testsTest for vertical flame propagation for a single insulated wire or cable AS 2122.11993 Combustion characteristics of plastics Determination of flame propagationSurface ignition of vertically oriented specimens of cellular plastics AS/NZS 2122.2:1999 Methods of test for determining combustion propagation characteristics of plasticsDetermination of minimum oxygen concentration for flame propagation following top surface ignition of vertically orientated specimens AS 2122.31993 Combustion characteristics of plastics Determination of smoke-releaseCellular polyurethanes and polyisocyanurates AS 24041980 Textile floor coveringsFire propagation of the usesurface using a small ignition source AS 2755.11985 Textile fabricsBurning behaviourDetermination of ease of ignition of vertically oriented specimens AS 2755.21985 Textile fabricsBurning behaviourMeasurement of flame spread properties of vertically oriented specimens AS 2755.31988 Textile fabricsDetermination of burning behaviourDetermination of surface burning time AS/NZS 3744.1:1998 FurnitureAssessment of the ignitability of upholstered furnitureIgnition sourceSmouldering cigarette AS/NZS 3744.2:1998 FurnitureAssessment of the ignitability of upholstered furnitureIgnition sourceMatch-flame equivalent AS/NZS 3744.3:1998 FurnitureAssesment of the ignitability of upholstered furnitureIgnition sourcesNominal 160 mL/min gas flame and nominal 350 mL/min gas flame AS/NZS 3837:1998 Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter AS/NZS 4088.1:1996 Specification for burning behaviour of upholstered furnitureUpholstery materials for domestic furniture Smouldering ignitability AS/NZS 4507:2006 CablesClassification of characteristics when exposed to fire AS ISO 9239.12003 Reaction to fire tests for floor coverings Determination of the burning behaviour using a radiant heat source
AS/NZS 60695.1.1:2001 Fire hazard testingGuidance for assessing the fire hazard of electrotechnical productsGeneral guidelines (IEC 60695-1-1:1999, IDT) AS 60695.1.402006 Fire hazard testingGuidance for assessing the fire hazard of electrotechnical productsInsulating liquids AS/NZS 60695.2.10:2001 Fire hazard testingGlowing/hot wire based test methodsGlow-wire apparatus and common test procedure AS/NZS 60695.2.11:2001 Fire hazard testingGlowing/hot wire based test methodsGlow-wire flammability test method for end-products AS/NZS 60695.2.12:2001 Fire hazard testingGlowing/hot wire based test methodsGlow-wire flammability test method for materials AS/NZS 60695.2.13:2001 Fire hazard testingGlowing/hot wire based test methodsGlow-wire ignitability test method for materials AS 60695.42006 Fire hazard testingTerminology concerning fire tests for electrotechnical products AS 60695.5.12006 Fire hazard testingCorrosion damage effects of fire effluentGeneral guidance AS 60695.5.22006 Fire hazard testingCorrosion damage effects of fire effluentSummary and relevance of test methods AS 60695.5.32006 Fire hazard testingCorrosion damage effects of fire effluentLeakage-current and metal-loss test method AS 60695.6.12006 Fire hazard testingSmoke obscuration General guidance AS 60695.6.22006 Fire hazard testing- Smoke obscuration Summary and relevance of test methods AS 60695.6.302006 Fire hazard testing- Guidance and test methods on the assessment of obscuration hazard of vision caused by smoke opacity from electrotechnical products involved in firesSmall scale static methodDetermination of smoke opacityDescription of the apparatus AS 60695.6.312006 Fire hazard testing- Smoke obscuration Small-scale static testMaterials AS 60695.7.12006 Fire hazard testingToxicity of fire effluent General guidance AS 60695.7.22006 Fire hazard testingToxicity of fire effluent Summary and relevance of test methods AS 60695.7.32006 Fire hazard testingToxicity of fire effluentUse and interpretation of test results AS 60695.7.502006 Fire hazard testingToxicity of fire effluent Estimation of toxic potencyApparatus and test method AS 60695.7.512006 Fire hazard testingToxicity of fire effluent Estimation of toxic potencyCalculation and interpretation of test results AS 60695.8.12006 Fire hazard testingHeat releaseGeneral guidance AS 60695.8.22006 Fire hazard testingHeat releaseSummary and relevance of test methods AS 60695.9.12006 Fire hazard testingSurface spread of flame General guidance AS 60695.9.22006 Fire hazard testingSurface spread of flame Summary and relevance of test methods AS/NZS 60695.10.2:2004 Fire hazard testing- Abnormal heatBall pressure test AS 60695.10.32006 Fire hazard testingAbnormal heatMould stress relief distortion test AS/NZS 60695.11.2:2004 Fire hazard testingTest flames1 kW nominal pre-mixed flameApparatus, confirmatory test arrangement and guidance AS/NZS 60695.11.3:2004 Fire hazard testingTest flames500 W flamesApparatus and confirmational test methods AS/NZS 60695.11.4:2004 Fire hazard testingTest flames50 W flamesApparatus and confirmational test methods AS/NZS 60695.11.5:2005 Fire hazard testingTest flamesNeedleflame test methodApparatus, confirmatory test arrangement and guidance AS/NZS 60695.11.10:2001 Fire hazard testingTest flames50 W horizontal and vertical flame test methods AS/NZS 60695.11.20:2001 Fire hazard testingTest flames500 W flame test methods AS 60695.11.212006 Fire hazard testingTest flames500 W vertical flame test method for tubular polymeric materials AS 60695.11.402006 Fire hazard testingTest flames Confirmatory testsGuidance
405
SUBJECT INDEX
ATS 5387.62006 GuidelinesFire safety engineeringStructural response and fire spread beyond the enclosure of origin ATS 5387.72006 GuidelinesFire safety engineeringDetection, activation and suppression ATS 5387.82006 GuidelinesFire safety engineeringLife safety Occupant behaviour, location and condition CD DOMESTIC2007 Domestic Building Standards CD HB 201996 Graphical symbols for fire protection drawings HB 37.01995 Handbook of Australian fire StandardsFire test StandardsPreparation, application and format HB 37.11993 Handbook of Australian fire StandardsFireGeneral HB 37.21993 Handbook of Australian fire StandardsElectrical equipment HB 37.31993 Handbook of Australian fire StandardsPlastics and rubberMaterials and products HB 37.41994 Handbook of Australian fire StandardsBuilding materials, products and construction HB 37.51995 Handbook of Australian fire StandardsTextiles Materials and products HB 461993 Guide to residential fire safety PROTECTION OF AND IN BUILDINGS Acoustics in building. Sound insulation AS ISO 140.42006 AcousticsMeasurement of sound insulation in buildings and of building elementsField measurements of airborne sound insulation between rooms (ISO 140-4:1998, MOD) AS ISO 140.62006 AcousticsMeasurement of sound insulation in buildings and of building elementsLaboratory measurements of impact sound insulation of floors AS/NZS ISO 140.7:2006 AcousticsMeasurement of sound insulation in buildings and of building elementsField measurements of impact sound insulation of floors (ISO140-7:1998, MOD) AS ISO 140.82006 AcousticsMeasurement of sound insulation in buildings and of building elementsLaboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor AS ISO 3542006 AcousticsMeasurement of sound absorption in a reverberation room AS/NZS ISO 717.1:2004 AcousticsRating of sound insulation in buildings and of building elementsAirborne sound insulation AS ISO 717.22004 AcousticsRating of sound insulation in buildings and of building elementsImpact sound insulation AS 11912002 AcousticsMethod for laboratory measurement of airborne sound transmission insulation of building elements AS 11911985 AcousticsMethod for laboratory measurement of airborne sound transmission loss of building partitions AS 12761979 Methods for determination of sound transmission class and noise isolation class of building partitions AS/NZS 1276.1:1999 AcousticsRating of sound insulation in buildings and of building elementsAirborne sound insulation AS 12771983 AcousticsMeasurement procedures for ducted silencers AS/NZS 2107:2000 AcousticsRecommended design sound levels and reverberation times for building interiors AS 21071987 AcousticsRecommended design sound levels and reverberation times for building interiors AS 22531979 Methods for field measurement of the reduction of airborne sound transmission in buildings AS/NZS 2460:2002 AcousticsMeasurement of the reverberation time in rooms AS/NZS 2499:2000 AcousticsMeasurements of sound insulation in buildings and of buildings elementsLaboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it AS 28221985 AcousticsMethods of assessing and predicting speech privacy and speech intelligibility AS 36711989 AcousticsRoad traffic noise intrusionBuilding siting and construction AS/NZS 4666:2000 Insulating glass units Lightning protection AS/NZS 1768:2007 Lightning protection AS 40701992 Recommended practices for protection of lowvoltage electrical installations and equipment in MEN systems from transient overvoltages Other standards related to protection of and in buildings AS 3660 (Set) Termite management
HB 37.41994 Handbook of Australian fire StandardsBuilding materials, products and construction Other standards related to protection against fire AS 46552005 Fire safety audits Protection against fire in general AS 1851 Set2005 Maintenance of fire protection systems and equipment Set AS 18512005 Maintenance of fire protection systems and equipment AS 1851.11995 Maintenance of fire protection equipment Portable fire extinguishers and fire blankets AS 1851.21995 Maintenance of fire protection equipmentFire hose reels AS 1851.31997 Maintenance of fire protection equipment Automatic fire sprinkler systems AS 1851.41992 Maintenance of fire protection equipmentFire hydrant installations AS 1851.51981 Maintenance of fire protection equipment Automatic smoke/heat venting systems AS 1851.61997 Maintenance of fire protection equipment Management procedures for maintaining the fire and smoke control features of air-handling systems AS 1851.71984 Maintenance of fire protection equipmentFireresistant doorsets AS 1851.81987 Maintenance of fire protection equipment Automatic fire detection and alarm systems AS 1851.8 Supplement 11990 Maintenance of fire protection equipmentAutomatic fire detection and alarm systemsSystem certificates and maintenance records (Supplement to AS 1851.81987) AS 1851.91997 Maintenance of fire protection equipmentDelivery lay flat fire hose AS 1851.101989 Maintenance of fire protection equipment Emergency warning and intercommunication systems AS 1851.111991 Maintenance of fire protection equipmentHalon 1301 total flooding systems AS 1851.121995 Maintenance of fire protection equipment Gaseous fire extinguishing systems AS/NZS 1851.13:1995 Maintenance of fire protection equipment Wheeled fire extinguishers AS 1851.141996 Maintenance of fire protection equipment Pumpset systems AS 1851.151997 Maintenance of fire protection equipmentLocal fire alarm systems AS/NZS 1851.16:1997 Maintenance of fire protection equipment Pyrogen fire extinguishing aerosol systems AS 24442001 Portable fire extinguishers and fire blankets Selection and location AS 24441995 Portable fire extinguishers and fire blankets Selection and location AS 2484.11990 FireGlossary of termsFire tests AS 2484.21991 FireGlossary of termsFire protection and firefighting equipment AS 2577.11992 Australian fire incident reporting system Description and implementation AS 2577.21992 Australian fire incident reporting system Classification and coding AS/NZS 3504:2006 Fire blankets AS 37581990 Guide to the evaluation of the effectiveness of fire retardants AS 37722008 Pre-engineered fire protection systems for cooking equipment AS 3959 Set2006 Building in bushfire-prone areas Set AS 39591999 Construction of buildings in bushfire-prone areas AS 39591991 Construction of buildings in bushfire-prone areas ATS 5387.12006 GuidelinesFire safety engineeringApplication of fire performance concepts to design objectives ATS 5387.22006 GuidelinesFire safety engineeringDesign fire scenarios and design fires ATS 5387.32006 GuidelinesFire safety engineeringAssessment and verification of mathematical fire models ATS 5387.42006 GuidelinesFire safety engineeringInitiation and development of fire and generation of fire effluents ATS 5387.52006 GuidelinesFire safety engineeringMovement of fire effluents
406
SUBJECT INDEX
AS 3660 Supplement 11993 Protection of buildings from subterranean termitesPrevention, detection and treatment of infestationCertificate of termiticide application (Supplement to AS 36601993) AS 3660 Supplement 21993 Protection of buildings from subterranean termitesPrevention, detection and treatment of infestationCertificate of completion (Supplement to AS 36601993) AS 3660.12000 Termite managementNew building work AS 3660.11995 Protection of buildings from subterranean termitesNew buildings AS 3660.22000 Termite managementIn and around existing buildings and structures AS 3660.32000 Termite managementAssessment criteria for termite management systems AS/NZS 3661.1:1993 Slip resistance of pedestrian surfaces Requirements AS/NZS 3661.2:1994 Slip resistance of pedestrian surfacesGuide to the reduction of slip hazards AS 4349.31998 Inspection of buildingsTimber pest inspections AS/NZS 4586:2004 Slip resistance classification of new pedestrian surface materials AS/NZS 4663:2004 Slip resistance measurement of existing pedestrian surfaces CD DOMESTIC2007 Domestic Building Standards CD HB 361993 Building in bushfire-prone areasInformation and advice HB 197:1999 An introductory guide to the slip resistance of pedestrian surface materials Seismic and vibration protection AS 1170.42007 Structural design actionsEarthquake actions in Australia AS 1170.41993 Minimum design loads on structures (known as the SAA Loading Code)Earthquake loads AS 1170.4 Supplement 11993 Minimum design loads on structures (known as the SAA Loading Code)Earthquake loads Commentary (Supplement to AS 1170.41993) AS 38261998 Strengthening existing buildings for earthquake Sound insulation see Acoustics in building. Sound insulation Thermal insulation of buildings AS 39991992 Thermal insulation of dwellingsBulk insulation Installation requirements AS/NZS 4200.1:1994 Pliable building membranes and underlays Materials AS/NZS 4200.2:1994 Pliable building membranes and underlays Installation requirements AS/NZS 4201.0:1994 Pliable building membranes and underlays Methods of testGeneral introduction and list of methods AS/NZS 4201.1:1994 Pliable building membranes and underlays Methods of testResistance to dry delamination AS/NZS 4201.2:1994 Pliable building membranes and underlays Methods of testResistance to wet delamination AS/NZS 4201.3:1994 Pliable building membranes and underlays Methods of testShrinkage AS/NZS 4201.4:1994 Pliable building membranes and underlays Methods of testResistance to water penetration AS/NZS 4201.5:1994 Pliable building membranes and underlays Methods of testEmittance AS/NZS 4201.6:1994 Pliable building membranes and underlays Methods of testSurface water absorbency AS/NZS 4666:2000 Insulating glass units HB 631994 Home insulation in AustraliaRecommended insulation levels for all States as per Australian Standard AS 2627.1 Waterproofing AS/NZS 2904:1995 Damp-proof courses and flashings AS 3740 Set2006 Wet areas Set AS 37402004 Waterproofing of wet areas within residential buildings AS/NZS 4200.1:1994 Pliable building membranes and underlays Materials AS/NZS 4200.2:1994 Pliable building membranes and underlays Installation requirements AS/NZS 4201.0:1994 Pliable building membranes and underlays Methods of testGeneral introduction and list of methods AS/NZS 4201.1:1994 Pliable building membranes and underlays Methods of testResistance to dry delamination
PROTECTIVE EQUIPMENT
AS/NZS 4201.2:1994 Pliable building membranes and underlays Methods of testResistance to wet delamination AS/NZS 4201.3:1994 Pliable building membranes and underlays Methods of testShrinkage AS/NZS 4201.4:1994 Pliable building membranes and underlays Methods of testResistance to water penetration AS/NZS 4201.5:1994 Pliable building membranes and underlays Methods of testEmittance AS/NZS 4201.6:1994 Pliable building membranes and underlays Methods of testSurface water absorbency AS/NZS 4347.0:1995 Damp-proof courses and flashingsMethods of testGeneral introduction, list of methods and test specimen requirements AS/NZS 4347.1:1995 Damp-proof courses and flashingsMethods of testDetermination of water permeability AS/NZS 4347.2:1995 Damp-proof courses and flashingsMethods of testDetermination of continuity of coating on metal centres AS/NZS 4347.3:1995 Damp-proof courses and flashingsMethods of testDetermination of pliability of bitumen coating on metal centres AS/NZS 4347.4:1995 Damp-proof courses and flashingsMethods of testDetermination of pliabilityMaterials with fabric or felt base AS/NZS 4347.5:1995 Damp-proof courses and flashingsMethods of testDetermination of compression properties AS/NZS 4347.6:1995 Damp-proof courses and flashingsMethods of testDetermining impact resistance (falling dart impact test) AS/NZS 4347.7:1995 Damp-proof courses and flashingsMethods of testDetermination of thickness of bitumen coating and thickness or mass of metallic centre AS/NZS 4347.8:1995 Damp-proof courses and flashingsMethods of testPreparation of coating bitumen for testing AS/NZS 4347.9:1995 Damp-proof courses and flashingsMethods of testDetermining thickness AS/NZS 4347.10:1995 Damp-proof courses and flashingsMethods of testDetermination of mass of desaturated base and percentage saturation AS/NZS 4858:2004 Wet area membranes PROTECTIVE EQUIPMENT Hand and arm protection AS/NZS 2161 Set:2008 Occupational protective gloves Set AS/NZS 2161.1:2000 Occupational protective glovesSelection, use and maintenance AS/NZS 2161.2:2005 Occupational protective glovesGeneral requirements AS/NZS 2161.3:2005 Occupational protective glovesProtection against mechanical risks AS/NZS 2161.4:1999 Occupational protective glovesProtection against thermal risks (heat and fire) AS/NZS 2161.5:1998 Occupational protective glovesProtection against cold AS 2161.62003 Occupational protective glovesProtective gloves for firefightersLaboratory test methods and performance requirements AS/NZS 2161.7.1:1998 Occupational protective glovesProtection against cuts and stabs by hand knivesChainmail gloves and arm guards AS/NZS 2161.7.2:2005 Occupational protective glovesProtection against cuts and stabs by hand knivesGloves and arm guards made of material other than chainmail AS/NZS 2161.7.3:2005 Occupational protective glovesProtection against cuts and stabs by hand knivesImpact cut test for fabric, leather and other materials AS/NZS 2161.8:2002 Occupational protective glovesProtection against ionizing radiation and radioactive contamination AS/NZS 2161.9:2002 Occupational protective glovesMethod of measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand AS/NZS 2161.10.1:2005 Occupational protective glovesProtective gloves against chemicals and micro-organismsTerminology and performance requirements AS/NZS 2161.10.2:2005 Occupational protective glovesProtective gloves against chemicals and micro-organismsDetermination of resistance to penetration AS/NZS 2161.10.3:2005 Occupational protective glovesProtective gloves against chemicals and micro-organismsDetermination of resistance to permeation by chemicals AS 22251994 Insulating gloves for electrical purposes
407
PROTECTIVE EQUIPMENT
SUBJECT INDEX
Leg and foot protection AS/NZS 2210.1:1994 Occupational protective footwearGuide to selection, care and use AS/NZS 2210.2:2000 Occupational protective footwear Requirements and test methods AS/NZS 2210.2:1994 Occupational protective footwear Specification AS/NZS 2210.3:2000 Occupational protective footwear Specification for safety footwear AS/NZS 2210.4:2000 Occupational protective footwear Specification for protective footwear AS/NZS 2210.5:2000 Occupational protective footwear Specification for occupational footwear AS/NZS 2210.6:2001 Occupational protective footwearAdditional requirements and test methods AS/NZS 2210.7:2001 Occupational protective footwearAdditional specifications for safety footwear AS/NZS 2210.8:2001 Occupational protective footwearAdditional specifications for protective footwear AS/NZS 2210.9:2001 Occupational protective footwearAdditional specifications for occupational footwear AS/NZS 4821:2006 Protective footwear for firefighters Requirements and test methods RUL PF.1:2004 Rulings to protective footwear StandardsRuling 1: Uppers (Ruling to AS/NZS 2210.2:2000) RUL PF.2:2004 Rulings to protective footwear StandardsRuling 2: Flame resistance (Ruling to AS/NZS 4821(Int):2002) Lifejackets, buoyancy aids and flotation devices AS 22611990 Rescue buoys AS 4758.12008 Personal flotation devicesGeneral requirements AS 4758.22008 Personal flotation devicesMaterials and componentsRequirements and test methods AS 4758.32008 Personal flotation devicesTest methods Other protective equipment AS/NZS 2604:1998 Sunscreen productsEvaluation and classification AS/NZS 3957:2006 Light-transmitting screens and curtains for welding operations Protection against falling and slipping AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices Harnesses and ancillary equipment AS/NZS 1891.2:2001 Industrial fall-arrest systems and devices Horizontal lifeline and rail systems AS/NZS 1891.2 Supplement 1:2001 Industrial fall-arrest systems and devicesHorizontal lifeline and rail systemsPrescribed configurations for horizontal lifelines (Supplement to AS/NZS 1891.2:2001) AS/NZS 1891.3:1997 Industrial fall-arrest systems and devices Fall-arrest devices AS/NZS 1891.4:2000 Industrial fall-arrest systems and devices Selection, use and maintenance AS 26261983 Industrial safety belts and harnessesSelection, use and maintenance AS/NZS 4488.1:1997 Industrial rope access systems Specifications AS/NZS 4488.2:1997 Industrial rope access systemsSelection, use and maintenance Protective clothing AS/NZS 1906.4:1997 Retroreflective materials and devices for road traffic control purposesHigh visibility materials for safety garments AS/NZS ISO 2801:2008 Clothing for protection against heat and flameGeneral recommendations for selection, care and use of protective clothing AS/NZS 4399:1996 Sun protective clothingEvaluation and classification AS/NZS 4453.1:1997 Protective clothing for users of hand-held chainsawsTest rig for testing resistance to cutting by a chainsaw AS/NZS 4453.2:1997 Protective clothing for users of hand-held chainsawsTest methods for leg protectors AS/NZS 4453.3:1997 Protective clothing for users of hand-held chainsawsProtective legwear AS/NZS 4501 Set:2008 Occupational protective clothing Set AS/NZS 4501.1:2008 Occupational protective clothingGuidelines on the selection, use, care and maintenance of protective clothing
Head protective equipment AS/NZS 1067:2003 Sunglasses and fashion spectacles AS 1067.11990 Sunglasses and fashion spectaclesSafety requirements AS/NZS 1269.3:2005 Occupational noise managementHearing protector program AS/NZS 1269.3:1998 Occupational noise managementHearing protector program AS/NZS 1270:2002 AcousticsHearing protectors AS/NZS 1336:1997 Recommended practices for occupational eye protection AS/NZS 1337:1992 Eye protectors for industrial applications AS/NZS 1337.4:2004 Personal eye-protectionFilters and eyeprotectors against laser radiation (laser eye-protectors) AS/NZS 1337.5:2004 Personal eye-protectionEye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) AS/NZS 1337.6:2007 Personal eye protectionPrescription eye protectors against low and medium impact AS/NZS 1338.1:1992 Filters for eye protectorsFilters for protection against radiation generated in welding and allied operations AS/NZS 1338.2:1992 Filters for eye protectorsFilters for protection against ultraviolet radiation AS/NZS 1338.3:1992 Filters for eye protectorsFilters for protection against infra-red radiation AS 16091981 Eye protectors for motor cyclists and racing car drivers AS/NZS 1698:2006 Protective helmets for vehicle users AS/NZS 1800:1998 Occupational protective helmetsSelection, care and use AS/NZS 1801:1997 Occupational protective helmets AS/NZS 2063:2008 Bicycle helmets AS 2512 (Frc) Methods of testing protective helmets AS 2512 (Lst) Methods of testing protective helmets AS/NZS 2512.1:1998 Methods of testing protective helmets Definitions and headforms AS 2512.11984 Methods of testing protective helmetsDefinitions and headforms AS/NZS 2512.2:2006 Methods of testing protective helmets General requirements for the conditioning and preparation of test specimens and laboratory conditions AS/NZS 2512.3.1:2007 Methods of testing protective helmets Determination of impact energy attenuationHelmet drop test AS/NZS 2512.3.2:1997 Methods of testing protective helmets Determination of impact energy attenuationStriker drop test AS/NZS 2512.4:1998 Methods of testing protective helmets Determination of penetration resistance AS/NZS 2512.5.1:2008 Methods of testing protective helmets Determination of strength of retention systemStatic strength AS/NZS 2512.5.1:1998 Methods of testing protective helmets Determination of strength of retention system AS/NZS 2512.5.2:1998 Methods of testing protective helmets Determination of strength of retention systemDynamic strength AS/NZS 2512.6:2006 Methods of testing protective helmets Measurement of horizontal peripheral vision clearance AS/NZS 2512.7.1:2006 Methods of testing protective helmets Determination of stability of protective helmetsStatic stability AS/NZS 2512.7.2:1998 Methods of testing protective helmets Determination of stability of protective helmetsDynamic stability AS/NZS 2512.8:2006 Methods of testing protective helmets Measurement of peak deflection AS/NZS 2512.9:2006 Methods of testing protective helmets Determination of load distribution AS/NZS 3838:2006 Helmets for horse riding and horse-related activities AS/NZS 4066:1992 Eye protectors for racquet sports AS/NZS 4067:2004 Firefighters' helmets AS/NZS 4499.1:1997 Protective headgear for cricketHelmets AS/NZS 4499.2:1997 Protective headgear for cricketTemple protectors AS/NZS 4499.3:1997 Protective headgear for cricketFaceguards HB 2092003 Guidelines for the fabrication, use and maintenance of sports mouthguards
408
SUBJECT INDEX
AS/NZS 4501.2:2006 Occupational protective clothingGeneral requirements AS/NZS 4502.1:2006 Methods for evaluating clothing for protection against heat and fireEvaluation of thermal behaviour of materials and material assemblies when exposed to a source of radiant heat AS/NZS 4502.2:1997 Methods for evaluating clothing for protection against heat and fireEvaluation of heat transmission of materials and material assemblies when exposed to flame AS/NZS 4502.3:1997 Methods for evaluating clothing for protection against heat and fireEvaluation of the behaviour of materials and material assemblies when exposed to small splashes of molten metal AS/NZS 4502.4:1997 Methods for evaluating clothing for protection against heat and fireEvaluation of the behaviour of materials and material assemblies when exposed to heavy splashes of molten metal AS/NZS 4502.5:1997 Methods for evaluating clothing for protection against heat and fireEvaluation of the contact heat transmission through material and material assemblies AS/NZS 4503.2:1997 Protective clothingProtection against liquid chemicalsTest method: Determination of resistance to penetration by a jet of liquid (Jet test) AS/NZS 4503.3:1997 Protective clothingProtection against liquid chemicalsTest method: Determination of resistance to penetration by spray (Spray Test) AS/NZS 4543.3:2000 Protective devices against diagnostic medical X-radiationProtective clothing and protective devices for gonads AS/NZS 4602:1999 High visibility safety garments AS/NZS 4824:2006 Protective clothing for firefighters Requirements and test methods for protective clothing used for wildland firefighting (ISO 15384:2003, MOD) AS 49672006 Protective clothing for firefightersRequirements and test methods for protective clothing used for structural firefighting AS/NZS ISO 6529:2006 Protective clothingProtection against chemicalsDetermination of resistance of protective clothing materials to permeation by liquids and gases AS/NZS ISO 6530:2006 Protective clothingProtection against liquid chemicalsTest method for resistance of materials to penetration by liquids AS/NZS ISO 13994:2006 Clothing for protection against chemicals Determination of the resistance of protective clothing materials to penetration by liquids under pressure AS/NZS ISO 22608:2007 Protective clothingProtection against liquid chemicalsMeasurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials Protective equipment in general HB 91994 Occupational personal protection Respiratory protective devices AS/NZS 1715:1994 Selection, use and maintenance of respiratory protective devices AS/NZS 1716:2003 Respiratory protective devices PUBLISHING see INFORMATION SCIENCES. PUBLISHING PULPS AS/NZS 1301.203s:2007 Methods of test for pulp and paperForming handsheets for physical testing of pulp AS/NZS 1301.206s:2002 Methods of test for pulp and paperFreeness of pulp AS/NZS 1301.422s:2007 Methods of test for pulp and paperDetermination of the pH value of aqueous extracts of paper, board and pulpHot extraction method AS/NZS 1301.204rp:2006 Methods of test for pulp and paperEstimation of dirt and shives in pulp PUMPS AS 24172001 Rotodynamic pumpsHydraulic performance acceptance testsGrades 1 and 2 AS 29412008 Fixed fire protection installationsPumpset systems AS 29412002 Fixed fire protection installationsPumpset systems AS/NZS 3136:2001 Approval and test specificationElectrical equipment for spa and swimming pools AS/NZS 3350.2.51:1998 Safety of household and similar electrical appliancesParticular requirementsStationary circulation pumps for heating and service water installations AS 46372006 Measurement of pump displacement and free air delivery of a reciprocating air compressor package
PUBLISHING
AS/NZS 60335.2.41:2004 Household and similar electrical appliances Safety- Particular requirements for pumps AS/NZS 60335.2.51:2006 Household and similar electrical appliances SafetyParticular requirements for stationary circulation pumps for heating and service water installations (IEC 60335-2-51 Ed 3, IDT) QUALITY Application of statistical methods AS 1199.02003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system AS 1199.12003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection AS 1199.22003 Sampling procedures for inspection by attributes Sampling plans indexed by limiting quality (LQ) for isolated lot inspection AS 1199.32003 Sampling procedures for inspection by attributes Skip-lot sampling procedures AS 1199.42003 Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels AS 24901997 Sampling procedures and charts for inspection by variables for percent nonconforming AS 39401990 Quality controlGuide to the use of control chart methods including Cusum techniques AS 39411990 Quality controlGuide for number nonconforming charts AS 39421993 Quality controlVariables chartsGuide AS/NZS 3944:1993 Shewhart control charts AS ISO 100172006 Guidance on statistical techniques for ISO 9001:2000 (ISO/TR 10017, Ed. 2.0 (2003) MOD) AS ISO 114532004 Statistical interpretation of dataTests and confidence intervals relating to proportions AS ISO 11462.12004 Guidelines for implementation of statistical process control (SPC)Elements of SPC AS ISO 134252004 Guidelines for the selection of statistical methods in standardization and specification AS ISO 16269.72004 Statistical interpretation of dataMedian Estimation and confidence intervals AS IEC 608122008 Analysis techniques for system reliability Procedure for failure mode and effects analysis (FMEA) AS IEC 611642008 Reliability growthStatistical test and estimation methods AS IEC 611652008 Application of Markov techniques HB 3252008 Assuring probity in decision-making Conformity assessment see Product and company certification. Conformity assessment Other standards related to quality AS IEC 610252008 Fault tree analysis (FTA) AS IEC 610782008 Analysis techniques for system reliability Reliability block diagram and Boolean methods AS IEC 623082008 Equipment reliabilityReliability assessment methods Product and company certification. Conformity assessment AS 2337.12004 Gas cylinder test stationsGeneral requirements, inspection and testsGas cylinders AS 2337.22004 Gas cylinder test stationsLP Gas fuel vessels for automotive use AS 2337.32006 Gas cylinder test stationsTransportable gas cylindersPeriodic inspection and testing of composite gas cylinders (ISO 11623:2002, MOD) AS/NZS 3841:1998 Guide 61: General requirements for assessment and accreditation of certification/registration bodies AS/NZS 3842:1998 Guide 62: General requirements for bodies operating assessment and certification/registration of quality systems AS/NZS 3843:1998 Guide 65: General requirements for bodies operating product certification systems AS 3920.11993 Assurance of product qualityPressure equipment manufacture AS/NZS 4417.1:2000 Marking of electrical products to indicate compliance with regulationsGeneral rules for use of the mark AS/NZS 4417.2:2001 Marking of electrical products to indicate compliance with regulationsSpecific requirements for electrical safety regulatory applications AS/NZS 4417.3:1996 Marking of electrical products to indicate compliance with regulationsSpecific requirements for electromagnetic compatibility regulatory applications
409
QUALITY
SUBJECT INDEX
HB 18.43.1:1998 Guidelines for third-party certification and accreditationGuide 43Proficiency testing by interlaboratory comparisonsPart 1: Development and operation of proficiency testing schemes HB 18.43.2:1998 Guidelines for third-party certification and accreditationGuide 43Proficiency testing by interlaboratory comparisonsPart 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies HB 18.441991 Guidelines for third-party certification and accreditationGuide 44General rules for ISO or IEC international thirdparty certification schemes for products HB 18.532005 Conformity assessmentGuidance on the use of an organizations quality management system in product certification HB 18.531991 Guidelines for third-party certification and accreditationGuide 53An approach to the utilization of a suppliers' quality system in third-party product certification HB 18.551991 Guidelines for third-party certification and accreditationGuide 55Testing laboratory accreditation systems General recommendations for operation HB 18.561991 Guidelines for third-party certification and accreditationGuide 56An approach to the review by a certification body of its own internal quality system HB 18.58:1993 Guideline for third-party certification and accreditationGuide 58Calibration and testing laboratory accreditation systemsGeneral requirements for operation and recognition HB 18.602005 Conformity assessmentCode of good practice HB 18.60:1995 Guidelines for third-party certification and accreditationGuide 60Code of good practice for conformity assessment HB 18.61:1996 Guidelines for third-party certification and accreditationGuide 61General requirements for assessment and accreditation of certification/registration bodies HB 18.62:1996 Guidelines for third-party certification and accreditationGuide 62General requirements for bodies operating assessment and certification/registration of quality systems HB 18.65:1998 Guidelines for third-party certification and accreditationGuide 65General requirements for bodies operating product certification systems HB 18.662004 Guidelines for third-party certification and accreditationGuide 66General requirements for bodies operating assessment and certification/registration of environmental management systems (EMS) HB 18.672005 Conformity assessmentFundamentals of product certification HB 18.682004 Guidelines for third-party certification adn accreditation -Guide 68Arrangements for the recognition and acceptance of conformity assessment results HB 19.351991 Reference materialsGuide 35Certification of reference materialsGeneral and statistical principles HB 90.0:2000 The ISO 9001 Comparison2000 vs 1994The ISO 9001 Comparison2000 vs 1994 HB 90.1 Set2006 Quality for Small Business Set HB 90.12000 The Small Business HandbookGuide to ISO 9001:2000The Small Business HandbookGuide to ISO 9001:2000 HB 90.2 Set2006 Quality for the Service Industry Set HB 90.22000 The Service Industry HandbookGuide to ISO 9001:2000The Service Industry HandbookGuide to ISO 9001:2000 HB 90.3 Set2006 Quality for the Construction Industry Set HB 90.32000 The Construction IndustryGuide to ISO 9001:2000 The Construction IndustryGuide to ISO 9001:2000 HB 90.42000 The Food Processing IndustryGuide to ISO 9001:2000The Food Processing IndustryGuide to ISO 9001:2000 HB 90.52000 Correlation between ISO 9001:2000 and the HACCP PrinciplesCorrelation between ISO 9001:2000 and the HACCP Principles HB 90.6 Set2006 Quality for the Legal Profession Set HB 90.62000 The Legal ProfessionGuide to ISO 9001:2000The Legal ProfessionGuide to ISO 9001:2000 HB 90.7 Set2006 Quality for Education and Training Set HB 90.72000 Education and TrainingGuide to ISO 9001:2000 Education and TrainingGuide to ISO 9001:2000 HB 90.8 Set2006 Quality for Healthcare Services Set HB 90.82000 Healthcare ServicesGuide to ISO 9001:2000 Healthcare ServicesGuide to ISO 9001:2000
AS/NZS 4417.4:1999 Marking of electrical products to indicate compliance with regulationsSpecific requirements for radio apparatus regulatory requirements AS 46552005 Fire safety audits AS 5200.0002006 Technical specification for plumbing and drainage productsProcedures for certification of plumbing and drainage products AS 5200.4582008 Plumbing and drainage productsUniversal plastic-bodied transition couplings ATS 5200.4862008 Technical Specification for plumbing and drainage productsSprinklers for home applications ATS 5200.9992005 Technical Specification for plumbing and drainage productsDeveloping technical specifications AS/NZS 6400:2005 Water efficient productsRating and labelling AS/NZS ISO 9001:2000 Quality management systems Requirements AS/NZS ISO 9001:2000 (SP) Quality management systems Requirements AS ISO 14064 Set2008 Greenhouse gases Set AS ISO 14064.12006 Greenhouse gasesSpecification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals AS ISO 14064.22006 Greenhouse gasesSpecification with guidance at the project level for quantification and reporting of greenhouse gas emission reductions and removal enhancements (ISO 14062-2:2006, MOD) AS ISO/IEC 170002005 Conformity assessmentVocabulary and general principles AS ISO/IEC 170102003 General requirements for bodies providing accreditation of inspection bodies AS ISO/IEC 170112005 Conformity assessmentGeneral requirements for accreditation bodies accrediting conformity assessment bodies AS/NZS ISO/IEC 17020:2000 General criteria for the operation of various types of bodies performing inspection AS ISO/IEC 170242004 Conformity assessmentGeneral requirements for bodies operating certification of persons AS ISO/IEC 170252005 General requirements for the competence of testing and calibration laboratories AS ISO/IEC 170302004 Conformity assessmentGeneral requirements for third-party marks of conformity AS ISO/IEC 170402005 Conformity assessmentGeneral requirements for peer assessment of conformity assessment bodies and accreditation bodies AS ISO/IEC 17050.12005 Conformity assessmentSuppliers declaration of conformityGeneral requirements AS ISO/IEC 17050.22005 Conformity assessmentSuppliers declaration of conformitySupporting documentation HB 18.2:2003 Guidelines for third-party certification and accreditationStandardization and related activitiesGeneral vocabulary HB 18.7:1994 Guidelines for third-party certification and accreditationGuide 7Guidelines for drafting of Standards suitable for use for conformity assessment HB 18.161991 Guidelines for third-party certification and accreditationGuide 16Code of principles on third-party certification systems and related Standards HB 18.22:2003 Guidelines for third-party certification and accreditationGeneral criteria for supplier's declaration of conformity HB 18.231991 Guidelines for third-party certification and accreditationGuide 23Methods of indicating conformity with Standards for third-party certification systems HB 18.271991 Guidelines for third-party certification and accreditationGuide 27Guidelines for corrective action to be taken by a certification body in the event of either misapplication of its mark of conformity to a product, or products which bear the mark of the certification body being found to subject persons or property to risk HB 18.282005 Conformity assessmentGuidance on a third-party certification system for products HB 18.281991 Guidelines for third-party certification and accreditationGuide 28General rules for a model third-party certification system for products HB 18.421991 Guidelines for third-party certification and accreditationGuide 42Guidelines for a step-by-step approach to an international certification system
410
SUBJECT INDEX
HB 90.9 Set2006 Quality for Software Development Set HB 90.92000 Software DevelopmentGuide to ISO 9001:2000 Software DevelopmentGuide to ISO 9001:2000 MP 482008 Certified gas cylinder test stations MP 522005 Manual of authorization procedures for plumbing and drainage products MP 631992 The Australian GarmentMarkSpecifications and procedures MP 76:1997 Pressure equipmentInspection bodies and personnel MP 87.1:2008 Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) Product Certification ProgramBasic rules and procedures ISO 9001 COMPANION SET2008 ISO 9001 Companion Set Quality in general AS 25291982 Collection of reliability, availability and maintainability data for electronics and similar engineering use AS 25301982 Presentation of reliability data on electronic and similar components AS 25611982 Guide to the determination and use of quality costs AS 38062006 Compliance programs AS 42691995 Complaints handling AS/NZS 4360/3806 Set Risk PLUS compliance Set AS/NZS 4360 COMPANION SET:2008 AS/NZS 4360 Companion Set AS 46082004 Dispute management systems AS 50372005 Knowledge managementa guide AS ISO 100022006 Customer satisfactionGuidelines for complaints handling in organizations (ISO 10002:2004, MOD) AS IEC 608122008 Analysis techniques for system reliability Procedure for failure mode and effects analysis (FMEA) AS IEC 610252008 Fault tree analysis (FTA) AS IEC 610782008 Analysis techniques for system reliability Reliability block diagram and Boolean methods AS IEC 611602008 Design review AS IEC 611642008 Reliability growthStatistical test and estimation methods AS IEC 611652008 Application of Markov techniques AS IEC 623082008 Equipment reliabilityReliability assessment methods AS IEC 623472008 Guidance on system dependability specifications CUSTOMER SATISFACTION SET2006 Customer Satisfaction Set HB 1892004 Knowledge Management Terminology and ReadingsAn Australian Guide HB 2292006 The why and how of complaints handling Quality management and quality assurance AS EN 7242002 Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices AS 3904.31994 Quality management and quality system elementsGuidelines for processed materials AS 3904.41994 Quality management and quality system elementsGuidelines for quality improvement AS 3905.11991 Quality system guidelinesGuidelines to AS 3901/NZS 9001/ISO 9001 for chemical and allied industries AS/NZS 3905.3:1994 Quality system guidelinesGuide for the hospitality industry AS/NZS 3905.4:1995 Quality system guidelinesGuide to quality system Standards AS/NZS ISO 9001:1994 and AS/NZS ISO 9002:1994 for the pressure equipment industry AS/NZS 3905.7:1995 Quality system guidelinesGuide to AS/NZS ISO 9001:1994 for the road freight transport industry AS 3905.91996 Quality system guidelinesGuide to AS/NZS ISO 9001:1994 for telecommunications call charging and call billing AS 3905.101997 Quality system guidelinesGuide to AS/NZS ISO 9001:1994 for the finance industry AS 3905.111998 Quality system guidelinesGuide to AS/NZS ISO 9002:1994 for the motor vehicle maintenance and repair industry AS/NZS 3905.12:1999 Quality system guidelinesGuide to AS/NZS ISO 9001 for architectural and engineering design practices AS 3905.151998 Quality system guidelinesGuide to AS/NZS ISO 9001:1994 for the accountancy profession AS 39062004 Quality of serviceGuide to customer expectations
QUALITY
AS 3925.11994 Software quality assurancePlans AS/NZS 4366:1996 Information technologySoftware packages Quality requirements and testing AS 45001997 Phased implementation of AS/NZS ISO 9001:1994 or AS/NZS ISO 9002:1994 AS 48602007 Knowledge-based identity authentication Recognizing Known Customers AS/NZS ISO 8402:1994 Quality management and quality assuranceVocabulary AS/NZS ISO 9000 Set:2008 Quality Management Systems Set AS/NZS ISO 9000:2006 Quality management systems Fundamentals and vocabulary AS/NZS ISO 9000.2:1998 Quality management and quality assurance StandardsGeneric guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 AS/NZS ISO 9001:2008 Quality management systems Requirements AS/NZS ISO 9001:2000 Quality management systems Requirements AS/NZS ISO 9001:2000 (SP) Quality management systems Requirements AS/NZS ISO 9001:1994 Quality systemsModel for quality assurance in design, development, production, installation and servicing AS/NZS ISO 9002:1994 Quality systemsModel for quality assurance in production, installation and servicing AS/NZS ISO 9003:1994 Quality systemsModel for quality assurance in final inspection and test AS/NZS ISO 9004:2000 Quality management systemsGuidelines for performance improvements AS/NZS ISO/IEC 9126.1:2005 Software engineeringProduct qualityQuality model AS/NZS ISO/IEC 9126.2:2005 Software engineeringProduct qualityExternal metrics AS/NZS ISO/IEC 9126.3:2005 Software engineeringProduct qualityInternal metrics AS/NZS ISO/IEC 9126.4:2005 Software engineeringProduct qualityQuality in use metrics AS/NZS ISO 10005:2006 Quality management systemsGuidelines for quality plans AS ISO 100062003 Quality management systemsGuidelines for quality management in projects AS ISO 100072003 Quality management systemsGuidelines for configuration management AS/NZS ISO 10012:2004 Measurement management systems Requirements for measurement processes and measuring equipment AS ISO 100132003 Guidelines for quality management system documentation AS ISO 100142007 Quality management systemsGuidelines for realizing financial and economic benefits AS ISO 100152006 Quality managementGuidelines for training (ISO 10015:1999, MOD) AS ISO 100172006 Guidance on statistical techniques for ISO 9001:2000 (ISO/TR 10017, Ed. 2.0 (2003) MOD) AS ISO 100192005 Guidelines for the selection of quality management system consultants and use of their services AS ISO 134852003 Medical devicesQuality management systemsRequirements for regulatory purposes AS/NZS ISO 14000 Set:2005 Environmental Management Standards Set AS/NZS ISO 14000 Basic Set:2007 Environmental Management Basic Set AS/NZS ISO 14001:2004 Environmental management systems Requirements with guidance for use AS/NZS ISO 14004:2004 Environmental management systems General guidelines on principles, systems and support techniques AS/NZS ISO 15161:2003 Guidelines on the application of ISO 9001:2000 for the food and drink industry AS ISO 169492003 Quality management systemsParticular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations AS ISO/IEC 170242004 Conformity assessmentGeneral requirements for bodies operating certification of persons AS ISO/IEC 170302004 Conformity assessmentGeneral requirements for third-party marks of conformity
411
SUBJECT INDEX
AS/NZS 1376:1996 Conversion factors AS/NZS 2310:2002 Glossary of paint and painting terms AS 2900.02002 Quantities and unitsGeneral principles AS 2900.12002 Quantities and unitsSpace and time AS 2900.22002 Quantities and unitsPeriodic and related phenomena AS 2900.32002 Quantities and unitsMechanics AS 2900.42002 Quantities and unitsHeat AS 2900.52002 Quantities and unitsElectricity and magnetism AS 2900.62002 Quantities and unitsLight and related electromagnetic radiations AS 2900.72002 Quantities and unitsAcoustics AS 2900.82002 Quantities and unitsPhysical chemistry and molecular physics AS 2900.92002 Quantities and unitsAtomic and nuclear physics AS 2900.102002 Quantities and unitsNuclear reactions and ionizing radiations AS 2900.112002 Quantities and unitsMathematical signs and symbols for use in the physical sciences and technology AS 2900.122002 Quantities and unitsCharacteristic numbers AS 2900.132002 Quantities and unitsSolid state physics AS Z301966 Interconversion of inch and metric dimensions RADIATION MEASUREMENTS AS 2772.21988 Radiofrequency radiationPrinciples and methods of measurement300 kHz to 100 GHz AS/NZS 3200.2.9:1997 Approval and test specificationMedical electrical equipmentParticular requirements for safetyPatient contact dosemeters used in radiotherapy with electrically connected detectors AS/NZS 4052:1992 Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz AS/NZS ISO 11137.3:2006 Sterilization of health care productsRadiation Guidance on dosimetric aspects RADIATION PROTECTION AS/NZS 2211.3:2002 Safety of laser productsGuidance for laser displays and shows AS 2243.41998 Safety in laboratoriesIonizing radiations AS/NZS 2243.5:2004 Safety in laboratoriesNon-ionizing radiations Electromagnetic, sound and ultrasound AS/NZS 2772.1(Int):1998 Radiofrequency fieldsMaximum exposure levels 3 kHz to 300 GHz AS 2772.21988 Radiofrequency radiationPrinciples and methods of measurement300 kHz to 100 GHz AS 29812008 High voltage a.c. switchgear and controlgearVacuum interruptersHigh voltage testingProtection of personnel from x-ray emission AS/NZS 3200.1.3:1996 Approval and test specificationMedical electrical equipmentGeneral requirements for safetyCollateral Standard: Requirements for radiation protection in diagnostic X-ray equipment AS/NZS 4495:1997 Radiotherapy equipmentCoordinates, movements and scales AS/NZS 4543.1:1999 Protective devices against diagnostic medical XradiationDetermination of attenuation properties of materials AS/NZS 4543.2:1999 Protective devices against diagnostic medical XradiationProtective glass plates AS/NZS 4543.3:2000 Protective devices against diagnostic medical XradiationProtective clothing and protective devices for gonads AS/NZS 4957:2002 Medical electrical equipmentDose area product meters RADIOCOMMUNICATIONS AS 40801995 User terminals for accessing the mobilesat satellite communications system AS/NZS 4346:1995 Guide to the installation in vehicles of mobile communication equipment intended for connection to a cellular mobile telecommunication service (CMTS) AS/NZS 4582:2004 MF and HF radiocommunications equipment in the international maritime mobile radiotelephone service(ETS 300 337:1995, MOD) AS/NZS 4582:1999 MF and HF radiocommunications equipment in the international maritime mobile radiotelephone service AS/NZS 4769.1:2000 Radiocommunications equipment used in the paging serviceAngle modulated equipment AS/NZS 4769.2:2000 Radiocommunications equipment used in the paging serviceAmplitude modulated equipment AS/NZS 4770:2000 MF and HF radiocommunications equipment in the land mobile service utilizing single sideband suppressed carrier emission
AS/NZS ISO 19011:2003 Guidelines for quality and/or environmental management systems auditing AS EN 460032002 Quality systemsMedical devicesParticular requirements for the application of ISO 9003 AS IEC 60300 (Set)2005 Dependability Management Set AS IEC 60300.12004 Dependability managementDependability management systems AS IEC 60300.22005 Dependability managementGuidance for dependability programme management AS IEC 60300.3.12003 Dependability managementApplication guideAnalysis techniques for dependabilityGuide on methodology AS IEC 60300.3.32005 Dependability managementApplication guideLife cycle costing AS IEC 60300.3.102004 Dependability managementApplication guideMaintainability AS IEC 60300.3.112004 Dependability managementApplication guideReliability centred maintenance AS IEC 60300.3.122004 Dependability managementApplication guideIntegrated logistic support AS IEC 60300.3.142005 Dependability managementApplication guideMaintenance and maintenance support AS IEC 608122008 Analysis techniques for system reliability Procedure for failure mode and effects analysis (FMEA) AS/NZS ISO/IEC 90003:2007 Software engineeringGuidelines for the application of AS/NZS ISO 9001:2000 to computer software HB 18.532005 Conformity assessmentGuidance on the use of an organizations quality management system in product certification HB 18.531991 Guidelines for third-party certification and accreditationGuide 53An approach to the utilization of a suppliers' quality system in third-party product certification HB 70.11994 HIA Quality Management SystemQuality Policy Manual HB 70.21994 HIA Quality Management SystemProject Procedure and Inspection Manual HB 80:1996 Benchmarking ExplainedA Guide for Undertaking and Implementing Benchmarking HB 90.0:2000 The ISO 9001 Comparison2000 vs 1994The ISO 9001 Comparison2000 vs 1994 HB 90.1 Set2006 Quality for Small Business Set HB 90.12000 The Small Business HandbookGuide to ISO 9001:2000The Small Business HandbookGuide to ISO 9001:2000 HB 90.2 Set2006 Quality for the Service Industry Set HB 90.22000 The Service Industry HandbookGuide to ISO 9001:2000The Service Industry HandbookGuide to ISO 9001:2000 HB 90.3 Set2006 Quality for the Construction Industry Set HB 90.32000 The Construction IndustryGuide to ISO 9001:2000 The Construction IndustryGuide to ISO 9001:2000 HB 90.42000 The Food Processing IndustryGuide to ISO 9001:2000The Food Processing IndustryGuide to ISO 9001:2000 HB 90.52000 Correlation between ISO 9001:2000 and the HACCP PrinciplesCorrelation between ISO 9001:2000 and the HACCP Principles HB 90.6 Set2006 Quality for the Legal Profession Set HB 90.62000 The Legal ProfessionGuide to ISO 9001:2000The Legal ProfessionGuide to ISO 9001:2000 HB 90.7 Set2006 Quality for Education and Training Set HB 90.72000 Education and TrainingGuide to ISO 9001:2000 Education and TrainingGuide to ISO 9001:2000 HB 90.8 Set2006 Quality for Healthcare Services Set HB 90.82000 Healthcare ServicesGuide to ISO 9001:2000 Healthcare ServicesGuide to ISO 9001:2000 HB 90.9 Set2006 Quality for Software Development Set HB 90.92000 Software DevelopmentGuide to ISO 9001:2000 Software DevelopmentGuide to ISO 9001:2000 HB 2512004 Customer Satisfaction MeasurementA handbook for users of AS/NZS ISO 9001:2000 HB 2652005 Meta ManagementA stakeholder/quality management approach to whole-of-enterprise management ISO 9001 COMPANION SET2008 ISO 9001 Companion Set QUANTITIES AND UNITS AS ISO 10001998 The international system of units (SI) and its application
412
SUBJECT INDEX
AS/NZS 61097.12:2008 Global maritime distress and safety system (GMDSS)Survival craft portable two-way VHF radiotelephone apparatusOperational and performance requirements, methods of testing and required test results (IEC 61097-12, Ed. 1.0 (1996) MOD) ACA TS 0051997 Analogue Cellular Mobile Telecommunications System AMPS Mobile Station ACA TS 0181997 Digital Cellular Mobile Telecommunications System GSM Mobile Station ACA TS 0191997 Radio Equipment and Systems Cordless TelecommunicationsCT2 CAI ACA TS 0281997 Radio Equipment and Systems Cordless TelecommunicationsDigital Enhanced Cordless Telecommunications (DECT) ACA TS 0341997 Radio Equipment and Systems Cordless TelecommunicationsPersonal Handy Phone System (PHS) Other equipment for radiocommunications AS/NZS 4771:2000 Technical characteristics and test conditions for data transmission equipment operating in the 900 MHz, 2.4 GHz and 5.8 GHz bands and using spread spectrum modulation techniques Radio relay and fixed satellite communications systems AS/NZS 4280.1:2003 406 MHz satellite distress beaconsMarine emergency position-indicating radio beacons (EPIRBs) (IEC 61097-2:2002, MOD) AS/NZS 4280.2:2003 406 MHz satellite distress beaconsPersonal locator beacons (PLBs) AS/NZS 4330:2006 121.5 and 243.0 MHz emergency position indicating radio beacons (EPIRBs) including personal EPIRBs ACA TS 0221997 MobileSat Terminal Compatibility Requirements for System Access Radiocommunications in general AS/NZS 4778:2001 Electromagnetic compatibility for radiocommunications equipment Receiving and transmitting equipment AS 11881990 Radio transmitters and similar equipmentSafe practices AS 3516.11988 Siting of radiocommunications facilitiesLF, MF and HF transmitting and HF receiving facilities AS 3516.21998 Siting of radiocommunications facilities Guidelines for fixed, mobile and broadcasting services operating at frequencies above 30 MHz AS 3516.31991 Siting of radiocommunications facilitiesFixed location satellite earth stations AS/NZS 4268:2008 Radio equipment and systemsShort range devicesLimits and methods of measurement AS/NZS 4281:2007 Radiocommunications requirements for cordless telephones operating in the 1.7 MHz and between 30 and 41 MHz frequency bands AS 4294(Int)1995 AMPS receiver immunity to interfering signals employing amplitude modulation AS/NZS 4295:2004 Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 29.7MHz to 1GHz AS/NZS 4355:2006 Radiocommunications equipment used in the handphone and citizen band radio services operating at frequencies not exceeding 30 MHz AS/NZS 4365:2002 Radiocommunications equipment used in the UHF citizen band radio service AS 43672007 Radiocommunications equipment used in the inshore boating radio services band AS/NZS 4415.1:2003 Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands Technical characteristics and methods of measurement Shipborne equipment and limited coast stations (including DSC) (IEC 61097-7:1996, MOD) AS/NZS 4415.2:2003 Radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands Technical characteristics and methods of measurementMajor coast stations, limited coast stations, ship stations and handheld stations (non DSC) (ETS 300 162:1998, MOD) AS/NZS 4417.4:1999 Marking of electrical products to indicate compliance with regulationsSpecific requirements for radio apparatus regulatory requirements AS/NZS 4432:1996 Radar transponders for marine search and rescue (SART)Operational and performance requirements and methods of test AS/NZS 4582:2004 MF and HF radiocommunications equipment in the international maritime mobile radiotelephone service(ETS 300 337:1995, MOD)
AS/NZS 4582:1999 MF and HF radiocommunications equipment in the international maritime mobile radiotelephone service AS/NZS 4583:1999 Amplitude modulated equipment for use in the aeronautical radio service in the frequency range 118 MHz to 137 MHz AS/NZS 4768.1:2006 Digital radio equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHzRadiofrequency requirements AS/NZS 4768.2:2003 Digital radio equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHzMethods of test (IEC 60489-6:1999, MOD) AS/NZS 4770:2000 MF and HF radiocommunications equipment in the land mobile service utilizing single sideband suppressed carrier emission AS 50182001 Electronic animal identificationNational coding scheme (ISO 11784:1996, MOD) AS 50192001 Electronic animal identificationRadiofrequency methods AS/NZS 5070.1:2008 Siting and operation of radiocommunications facilitiesGeneral guidelines for fixed, mobile and broadcasting facilities including fixed location satellite earth stations independent of the operating frequency AS/NZS 5070.2:2008 Siting and operation of radiocommunications facilitiesGuidelines for siting of radiocommunications facilities: VHF, UHF and SHF AS/NZS 61097.12:2008 Global maritime distress and safety system (GMDSS)Survival craft portable two-way VHF radiotelephone apparatusOperational and performance requirements, methods of testing and required test results (IEC 61097-12, Ed. 1.0 (1996) MOD) AS/NZS IEC 62287.1:2007 Maritime navigation and radiocommunication equipment and systemsClass B shipborne equipment of the automatic identification system (AIS)Carrier-sense time division multiple access (CSTDMA) techniques RAILS AND RAILWAY COMPONENTS AS 1085.12002 Railway track materialSteel rails AS 1085.22002 Railway track materialFishplates AS 1085.32002 Railway track materialSleeper plates AS 1085.42002 Railway track materialFishbolts and nuts AS 1085.72003 Railway track materialSpring washers AS 1085.82002 Railway track materialDogspikes AS 1085.102002 Railway track materialRail anchors AS 1085.122002 Railway track materialInsulated joint assemblies AS 1085.132002 Railway track materialSpring fastening spikes for sleeper plates AS 1085.142003 Railway track materialPrestressed concrete sleepers AS 1085.172003 Railway track materialSteel sleepers AS 1085.182003 Railway track materialScrew spikes and threaded inserts AS 1085.192003 Railway track materialResilient fastening assemblies AS 1085.202006 Railway track materialWelding of steel rail AS 3818.22004 TimberHeavy structural productsVisually graded Railway track timbers AS 3818.72006 TimberHeavy structural productsVisually gradedLarge cross-section sawn hardwood engineering timbers RAILWAY ENGINEERING IN GENERAL AS 1085.12002 Railway track materialSteel rails AS 1085.22002 Railway track materialFishplates AS 1085.32002 Railway track materialSleeper plates AS 1085.42002 Railway track materialFishbolts and nuts AS 1085.72003 Railway track materialSpring washers AS 1085.82002 Railway track materialDogspikes AS 1085.102002 Railway track materialRail anchors AS 1085.122002 Railway track materialInsulated joint assemblies AS 1085.132002 Railway track materialSpring fastening spikes for sleeper plates AS 1085.142003 Railway track materialPrestressed concrete sleepers AS 1085.172003 Railway track materialSteel sleepers AS 1085.182003 Railway track materialScrew spikes and threaded inserts AS 1085.192003 Railway track materialResilient fastening assemblies AS 1085.202006 Railway track materialWelding of steel rail AS 4292.12006 Railway safety managementGeneral requirements AS 4292.22006 Railway safety managementTrack, civil and electrical infrastructure AS 4292.32006 Railway safety managementRolling stock
413
SUBJECT INDEX
AS 1774.72008 Refractories and refractory materialsPhysical test methodsPermeability to gases AS 1774.92007 Refractories and refractory materialsPhysical test methodsDetermination of resistance to the disintegrating effect of carbon monoxide AS 1774.102002 Refractories and refractory materialsPhysical test methodsPyrometric cone equivalent (refractoriness) AS 1774.112005 Refractories and refractory materialsPhysical test methodsDetermination of thermal expansion AS 1774.122001 Refractories and refractory materialsPhysical test methods,Refractoriness under loadTemperatures of deformation at constant load with rising temperature AS 1774.132000 Refractories and refractory materialsPhysical test methodsPermanent dimensional change AS 1774.142008 Refractories and refractory materialsPhysical test methodsThermal conductivity AS 1774.192003 Refractories and refractory materialsPhysical test methodsThe determination of sieve analysis and moisture content AS 1774.212005 Refractories and refractory materialsPhysical test methodsDetermination of workability indexMouldable refractories AS 1774.222000 Refractories and refractory materialsPhysical test methodsRefractory mortarTest methods AS 1774.23.12001 Refractories and refractory materialsPhysical test methodsAbradability indexOblique method AS 1774.23.21999 Refractories and refractory materialsPhysical test methodsAbradability indexPerpendicular method AS 1774.242006 Refractories and refractory materialsPhysical test methodsDetermination of the resistance to thermal shock AS 1774.251998 Refractories and refractory materialsPhysical test methodsDetermination of density by the Rees-Hugill method AS 1774.262008 Refractories and refractory materialsPhysical test methodsCreep in compressionDeformation under constant load and constant temperature AS 1774.272001 Refractories and refractory materialsPhysical test methodsModulus of rupture at elevated temperatures AS 1774.282007 Refractories and refractory materialsPhysical test methodsCeramic fibre productsTest methods AS 1774.292008 Refractories and refractory materialsCast coverage AS 1774.302005 Refractories and refractory materialsPhysical test methodsDrying and firing schedules AS 1774.31.12000 Refractories and refractory materialsPhysical test methodsModulus of elasticityFlexural method AS 1774.31.22001 Refractories and refractory materialsPhysical test methods,Modulus of elasticityCompression method AS 1774.322002 Refractories and refractory materialsPhysical test methodsRefractory products containing carbonTest methods AS 1774.332003 Refractories and refractory materialsPhysical test methodsDetermination of the setting time of castables AS 1774.342004 Refractories and refractory materialsPhysical test methodsGuide to the determination of extrusion pressure and curing time of taphole clay AS 1774.352007 Refractories and refractory materialsPhysical test methodsGuide to the determination of resistance to corrosive reagents AS 2497.12001 Procedures for acceptance testing of refractory products Batch procedure AS 2503.12006 Refractories and refractory materialsChemical analysis Silica refractories AS 2503.22006 Refractories and refractory materialsChemical analysis Aluminosilicate refractories AS 2503.32006 Refractories and refractory materialsChemical analysis High alumina materials AS 2503.42006 Refractories and refractory materialsChemical analysis Dolomites and magnesites AS 2503.52003 Refractories and refractory materialsChemical analysis Chrome-bearing materials AS 2503.62007 Refractories and refractory materialsChemical analysis Refractories, refractory mortars and silicate materialsDetermination of major and minor elementsWavelength dispersive X-ray fluorescence spectrometry using lithium borate fusion AS 27802003 Refractories and refractory materialsGlossary of terms AS 4045.12003 Prepared unshaped refractory materialsDense AS 4045.22006 Prepared unshaped refractory materialsInsulating AS 4359.11996 Insulating refractory ceramic fibresBulk fibre and blankets AS 4359.21998 Insulating refractory ceramic fibresBoard ASCRM 002-11997 Certified reference materialFloat glassFor use in determining abradability index by AS 1774.23.1
AS 4292.42006 Railway safety managementSignalling and telecommunications systems and equipment AS 4292.52006 Railway safety managementOperational systems AS 4292.72006 Railway safety managementRailway safety investigation AS 47992000 Installation of underground utility services and pipelines within railway boundaries RAILWAY ROLLING STOCK AS 23772002 AcousticsMethods for the measurement of railbound vehicle noise RAW MATERIALS FOR RUBBER AND PLASTICS Latex and raw rubber AS 1683 (Pt 5 to 6)1974 Methods of test for elastomersFirst Group: Methods 5, 6 AS 1683.12002 Methods of test for elastomersRubber latex Sampling AS 1683.51974 Methods of test for rubberCoagulum content of rubber latices AS 1683.61974 Methods of test for rubberVolatile fatty acid number of natural rubber latex Raw materials for rubber and plastics in general AS/NZS 4131:2003 Polyethylene (PE) compounds for pressure pipes and fittings Rubber compounding ingredients AS 5082.12007 Polybutylene (PB) plumbing pipe systemsMetric seriesMetric polybutylene (PB) pipes for hot and cold water applications AS 5082.22007 Polybutylene (PB) plumbing pipe systemsMetric seriesMechanical and fusion jointing systems REACTORS see TRANSFORMERS. REACTORS RECTIFIERS. CONVERTERS. STABILIZED POWER SUPPLY AS 1852.4311981 International electrotechnical vocabularyTransductors AS/NZS 4763(Int):2006 Safety of Portable Inverters AS 4777.12005 Grid connection of energy systems via inverters Installation requirements AS 4777.22005 Grid connection of energy systems via invertersInverter requirements AS 4777.32005 Grid connection of energy systems via invertersGrid protection requirements AS 61204.12003 Low-voltage power supply devices, d.c. output Performance characteristics AS 62040.1.12003 Uninterruptible power systems (UPS)- General and safety requirements for UPS used in operator access areas AS 62040.1.22003 Uninterruptible power systems (UPS)- General and safety requirements for UPS used in restricted access locations AS 62040.22008 Uninterruptible power systems (UPS)Electromagnetic compatibility (EMC) requirements AS 62310.12005 Static transfer systems (STS)General and safety requirements AS 62310.22006 Static transfer systems (STS)Electromagnetic compatibility (EMC) requirements REFRACTORIES AS 1617.12003 Refractory bricks and shapesFireclay AS 1617.22003 Refractory bricks and shapesInsulating AS 1617.32003 Refractory bricks and shapesHigh alumina AS 1617.42003 Refractory bricks and shapesSilica AS 1617.52003 Refractory bricks and shapesMagnesite, chrome AS 16182003 Dimensions and preferred sizes for refractory bricks AS 1774.12000 Refractories and refractory materialsPhysical test methodsDetermination of cold compressive strength AS 1774.22001 Refractories and refractory materialsPhysical test methodsDetermination of bulk density of granular materials AS 1774.32000 Refractories and refractory materials -Physical test methodsDetermination of cold modulus of rupture AS 1774.4.12002 Refractories and refractory materialsPhysical test methodsPreparation of test piecesBy casting AS 1774.4.31998 Refractories and refractory materialsPhysical test methodsPreparation of test piecesUnshaped refractories on site AS 1774.4.42001 Refractories and refractory materialsPhysical test methodsPreparation of test piecesMouldable refractories AS 1774.4.52002 Refractories and refractory materialsPhysical test methodsPreparation of test piecesGunning refractories AS 1774.52001 Refractories and refractory materialsPhysical test methodsThe determination of density, porosity and water absorption AS 1774.62001 Refractories and refractory materialsPhysical test methodsDetermination of true density
414
SUBJECT INDEX
ASCRM 002-21999 Certified reference materialFloat glassFor use in determining abradability index by AS 1774.23.2 TR 2.2-11997 Certified reference materialsFloat glass (for use in determination of abradability index by AS 1774.23.1) Preparation and certification of ASCRM 002-1 TR 2.2-21999 Certified reference materialsFloat glass (for use in determination of abradability index by AS 1774.23.2)Preparation and certification of ASCRM 002-2 REFRIGERATING TECHNOLOGY AS/NZS 1677.1:1998 Refrigerating systemsRefrigerant classification AS/NZS 1677.2:1998 Refrigerating systemsSafety requirements for fixed applications AS 17311983 Frozen food retail cabinets AS 1731.12003 Refrigerated display cabinetsTerms and definitions AS 1731.112003 Refrigerated display cabinetsInstallation, maintenance and user guide AS/NZS 3823.1.1:1998 Performance of electrical appliancesAirconditioners and heat pumps- Test MethodsNon-ducted airconditioners and heat pumpsTesting and rating for performance AS/NZS 3823.1.2:2001 Performance of electrical appliancesAirconditioners and heat pumps- Test methodsDucted airconditioners and air-to-air heat pumpsTesting and rating for performance AS/NZS 3823.2:2005 Performance of electrical appliancesAirconditioners and heat pumpsEnergy labelling and minimum energy performance standard (MEPS) requirements AS/NZS 3823.3:2002 Performance of electrical appliancesAirconditioners and heat pumpsCalculation of performance for minimum energy performance standard (MEPS) requirements AS 38641997 Medical refrigeration equipmentFor the storage of blood and blood products AS 4211.11996 Gas recovery or combined recovery and recycling equipmentFluorocarbon refrigerants from automotive airconditioning systems AS 4211.31996 Gas recovery or combined recovery and recycling equipmentFluorocarbon refrigerants from commercial/domestic refrigeration and airconditioning systems AS/NZS 4474.1:2007 Performance of household electrical appliances Refrigerating appliancesEnergy consumption and performance AS/NZS 4474.1:1997 Performance of household electrical appliances Refrigerating appliancesEnergy consumption and performance AS/NZS 4474.2:2001 Performance of household electrical appliances Refrigerating appliancesEnergy labelling and minimum energy standard requirements AS 45552002 (AG 1052002) Domestic gas refrigerators AS/NZS 4776.1.1:2008 Liquid-chilling packages using the vapour compression cycleMethod of rating and testing for performanceRating AS/NZS 4776.1.2:2008 Liquid-chilling packages using the vapour compression cycleMethod of rating and testing for performanceTesting AS/NZS 4776.2:2008 Liquid-chilling packages using the vapour compression cycleMinimum energy performance standard (MEPS) and compliance requirements AS/NZS 4864.1:2008 Performance of refrigerated beverage vending machinesTest methodsEnergy performance AS/NZS 4865.1:2008 Performance of commercial ice makers and ice storage binsTest methods for ice makersEnvironmental performance AS/NZS 4865.2:2008 Performance of commercial ice makers and ice storage binsTest methods for ice storage binsEnvironmental performance AS/NZS 4865.3:2008 Performance of commercial ice makers and ice storage binsMinimum energy performance standard (MEPS) requirements AS/NZS 4965.1:2008 Performance of close control airconditionersTesting for rating AS/NZS 4965.2:2008 Performance of close control airconditionersMinimum energy performance standard (MEPS) requirements HB 2762004 A Guide to Good Practice for Energy Efficient Installation of Residential Heating, Cooling & Air Conditioning Plant & Equipment REINFORCED PLASTICS AS 26341983 Chemical plant equipment made from glass-fibre reinforced plastics (GRP) based on thermosetting resins AS 35711989 Glass filament reinforced thermosetting plastics (GRP) pipesPolyester basedWater supply, sewerage and drainage applications AS 3572.02002 PlasticsGlass filament reinforced plastics (GRP)Methods of testIntroduction and list of methods AS 3572.12002 PlasticsGlass filament reinforced plastics (GRP)Methods of testPreparation of glass filament reinforced plastics test specimens AS 3572.22002 PlasticsGlass filament reinforced plastics (GRP)Methods of testDetermination of chemical resistance of glass reinforced plastics
REFRIGERATING TECHNOLOGY
AS 3572.32002 PlasticsGlass filament reinforced plastics (GRP)Methods of testDetermination of loss on ignition of glass filament reinforced plastics AS 3572.42002 PlasticsGlass filament reinforced plastics (GRP)Methods of testDetermination of the dimensions of glass filament reinforced plastics pipes AS 3572.52002 PlasticsGlass filament reinforced plastics (GRP)Methods of testDetermination of hoop tensile strength of wound glass filament reinforced plastics pipes AS 3572.62002 PlasticsGlass filament reinforced plastics (GRP)Methods of testDetermination of hoop tensile modulus of elasticity of wound glass filament reinforced plastic pipes AS 3572.72002 PlasticsGlass filament reinforced plastics (GRP)Methods of testDetermination of extension to failure of unreinforced resins AS 3572.82002 PlasticsGlass filament reinforced plastics (GRP)Methods of testDetermination of long term ring stiffness of glass filament reinforced plastic pipes AS 3572.92002 PlasticsGlass filament reinforced plastics (GRP)Methods of testDetermination of pressure regression characteristics as a function of time for glass filament reinforced plastic pipes AS 3572.102002 PlasticsGlass filament reinforced plastics (GRP) Methods of testDetermination of the initial ring stiffness of a glass filament reinforced plastics pipes AS 3572.112002 PlasticsGlass filament reinforced plastics (GRP) Methods of testDetermination of the initial ring deflection of glass filament reinforced plastics pipes AS 3572.122002 PlasticsGlass filament reinforced plastics (GRP) Methods of testDetermination of initial failure pressure and initial hoop strength of glass filament reinforced plastics pipes AS 3572.132002 PlasticsGlass filament reinforced plastics (GRP) Methods of testDetermination of the initial longitudinal tensile strength of glass filament reinforced plastics pipes AS 3572.142002 PlasticsGlass filament reinforced plastics (GRP) Methods of testDetermination of long-term ring deflection of glass filament reinforced plastics (GRP) pipe subject to constant load and environmental exposure AS 3572.152002 PlasticsGlass filament reinforced plastics (GRP) Methods of testDetermination of resistance to long-term strain corrosion of glass filament reinforced plastics pipes AS 3572.162002 PlasticsGlass filament reinforced plastics (GRP) Methods of testTesting of flexible joints of glass filament reinforced plastics pipes AS/NZS 3572.18:1997 PlasticsGlass filament reinforced plastics (GRP) Methods of testMethod for determining the ultimate tensile strength and unit modulus of flat laminates AS/NZS 3572.19:1997 PlasticsGlass filament reinforced plastics (GRP) Methods of testMethod for the determination of the lap shear strength of laminate AS/NZS 3572.20:1997 PlasticsGlass filament reinforced plastics (GRP) Methods of testMethod for the determination of the peel strength of the bond between laminate layers AS/NZS 3572.21:1997 PlasticsGlass filament reinforced plastics (GRP) Methods of testMethod for the determination of the shear strength of a sandwich panel AS/NZS 3572.22:1997 PlasticsGlass filament reinforced plastics (GRP) Methods of testMethod for the determination of hardness by means of a Barcol impressor AS/NZS 3572.23:1997 PlasticsGlass filament reinforced plastics (GRP) Methods of testMethod for the determination of the initial longitudinal tensile strength by means of a tensile plate test AS/NZS 3572.24:1997 PlasticsGlass filament reinforced plastics (GRP) Methods of testMethod for the determination of the initial hoop tensile strength by means of a tensile plate test AS/NZS 4256.3:1994 Plastic roof and wall cladding materialsGlass fibre reinforced polyester (GRP) ROAD ENGINEERING Road construction AS 37271993 Guide to residential pavements Road construction materials AS 11601996 Bituminous emulsions for the construction and maintenance of pavements AS 20081997 Residual bitumen for pavements AS 21502005 Hot mix asphaltA guide to good practice AS/NZS 2341.0:2002 Methods of testing bitumen and related roadmaking productsGeneral introduction and list of standards AS/NZS 2341.1:1994 Methods of testing bitumen and related roadmaking productsPrecision dataDefinitions
415
ROAD ENGINEERING
SUBJECT INDEX
AS 2891.1.22008 Methods of sampling and testing asphalt SamplingCoring method AS 2891.1.32008 Methods of sampling and testing asphalt SamplingAsphalt from slabs AS 2891.2.11995 Methods of sampling and testing asphalt Sample preparationMixing, quartering and conditioning of asphalt in the laboratory AS 2891.2.21995 Methods of sampling and testing asphalt Sample preparationCompaction of asphalt test specimens using a gyratory compactor AS/NZS 2891.3.1:1997 Methods of sampling and testing asphalt Bitumen content and aggregate gradingReflux method AS/NZS 2891.3.2:1997 Methods of sampling and testing asphalt Bitumen content and aggregate gradingCentrifugal extraction method AS/NZS 2891.3.3:1997 Methods of sampling and testing asphalt Bitumen content and aggregate gradingPressure filter method AS 2891.52004 Methods of sampling and testing asphalt Determination of stability and flowMarshall procedure AS 2891.7.12004 Methods of sampling and testing asphalt Determination of maximum density of asphaltWater displacement method AS 2891.7.32005 Methods of sampling and testing asphalt Determination of maximum density of asphaltMethylated spirits displacement AS 2891.82005 Methods of sampling and testing asphaltVoids and density relationships for compacted asphalt mixes AS 2891.9.12005 Methods of sampling and testing asphalt Determination of bulk density of compacted asphaltWaxing procedure AS 2891.9.22005 Methods of sampling and testing asphalt Determination of bulk density of compacted asphalt Presaturation method AS 2891.9.32005 Methods of sampling and testing asphalt Determination of bulk density of compacted asphalt Mensuration method AS 2891.102005 Methods of sampling and testing asphaltWater and volatile oils content AS 2891.112005 Methods of sampling and testing asphaltDegree of particle coating AS 2891.12.11995 Methods of sampling and testing asphalt Determination of the permanent compressive strain characteristics of asphaltDynamic creep test AS 2891.13.11995 Methods of sampling and testing asphalt Determination of the resilient modulus of asphaltIndirect tensile method AS/NZS 2891.14.1.1:1996 Methods of sampling and testing asphaltField density testsDetermination of field density of compacted asphalt using a nuclear surface moisture-density gauge Direct transmission mode AS/NZS 2891.14.1.2:1999 Methods of sampling and testing asphaltField density testsDetermination of field density of compacted asphalt using a nuclear surface moisture-density gauge Backscatter mode AS/NZS 2891.14.2:1999 Methods of sampling and testing asphalt Field density testsDetermination of field density of compacted asphalt using a nuclear thin-layer density gauge AS/NZS 2891.14.3:1999 Methods of sampling and testing asphalt Field density testsCalibration of nuclear thin-layer density gauge using standard blocks AS/NZS 2891.14.4:1999 Methods of sampling and testing asphalt Field density testsCalibration of nuclear surface moisturedensity gaugeBackscatter mode AS/NZS 2891.14.5:1999 Methods of sampling and testing asphalt Field density testsDensity ratio of compacted asphalt AS 35681999 Oils for reducing the viscosity of residual bitumen for pavements AS 37271993 Guide to residential pavements AS 42831995 Cold mix asphalt for maintenance patching AS 5101.2.22008 Methods for preparation and testing of stabilized materialsSamplingPreparation of stabilized pavement materials AS 5101.3.32008 Methods for preparation and testing of stabilized materialsCement content of cement stabilized materials HB 152:2002 Asphalt Guide HB 223:2003 Guide to the selection of road surfacings HB 259.1:2001 Guidelines for road condition monitoringPavement roughness
AS 2341.21993 Methods of testing bitumen and related roadmaking productsDetermination of dynamic (coefficient of shear) viscosity by flow through a capillary tube AS 2341.31993 Methods of testing bitumen and related roadmaking productsDetermination of kinematic viscosity by flow through a capillary tube AS 2341.41994 Methods of testing bitumen and related roadmaking productsDetermination of dynamic viscosity by rotational viscometer AS/NZS 2341.5:1997 Methods of testing bitumen and related roadmaking productsDetermination of apparent viscosity by 'Shell' sliding plate micro-viscometer AS 2341.61992 Methods of testing bitumen and related roadmaking productsDetermination of density using a hydrometer AS 2341.71993 Methods of testing bitumen and related roadmaking productsDetermination of density using a density bottle AS 2341.81992 Methods of testing bitumen and related roadmaking productsDetermination of matter insoluble in toluene AS 2341.91992 Methods of testing bitumen and related roadmaking productsDetermination of water content (Dean and Stark) AS/NZS 2341.10:1994 Methods of testing bitumen and related roadmaking productsDetermination of the effect of heat and air on a moving film of bitumen (rolling thin film oven (RTFO) test) AS 2341.111994 Methods of testing bitumen and related roadmaking productsDetermination of ductility AS 2341.121993 Methods of testing bitumen and related roadmaking productsDetermination of penetration AS/NZS 2341.13:1997 Methods of testing bitumen and related roadmaking productsLong-term exposure to heat and air AS 2341.141992 Methods of testing bitumen and related roadmaking productsDetermination of flashpoint of residual bitumen AS 2341.151994 Methods of testing bitumen and roadmaking productsDistillation of cutback bitumen AS 2341.161994 Methods of testing bitumen and related roadmaking productsDetermination of flashpoint of cutback bitumen AS 2341.171992 Methods of testing bitumen and related roadmaking productsDetermination of distillation properties of tar AS 2341.181992 Methods of testing bituminous and related roadmaking productsDetermination of softening point (ring and ball method) AS 2341.191992 Methods of testing bitumen and related roadmaking productsDetermination of matter insoluble in quinoline for tar AS/NZS 2341.20:1998 Methods of testing bitumen and related roadmarking productsDetermination of sieve residue for bituminous materials AS/NZS 2341.21:1995 Methods of testing bitumen and related roadmaking productsSample preparation AS/NZS 2341.22:1996 Methods of testing bitumen and related roadmaking productsDetermination of particle charge AS/NZS 2341.23:2002 Methods of testing bitumen and related roadmaking productsDetermination of residue from evaporation AS/NZS 2341.24:1996 Methods of testing bitumen and related roadmaking productsCalculation of non-aqueous volatiles content (by difference) AS 2341.252002 Methods of testing bitumen and related roadmaking productsDetermination of consistency AS/NZS 2341.26:2002 Methods of testing bitumen and related roadmaking productsDetermination of sieve residue AS/NZS 2341.27:2008 Methods of testing bitumen and related roadmaking productsDetermination of sedimentation AS 2341.282002 Methods of testing bitumen and related roadmaking productsDetermination of stone coating ability and water resistance AS 2341.291996 Methods of testing bitumen and related roadmaking productsDetermination of breaking behaviour by setting time AS/NZS 2341.30:1996 Methods of testing bitumen and related roadmaking productsRecovery of residue from bituminous emulsion AS 2341.311998 Methods of testing bitumen and related roadmarking productsMeasurement of water content of emulsions by automated Karl Fischer titration AS 2891.1.12008 Methods of sampling and testing asphalt SamplingLoose asphalt
416
SUBJECT INDEX
Road engineering in general AS 13482002 Glossary of termsRoads and traffic engineering HB 153:2002 Urban Road Design: A Guide to the Geometric Design of Major Urban Roads Road equipment and installations AS 1742.12003 Manual of uniform traffic control devicesGeneral introduction and index of signs AS 1742.1 Supplement 1(Int)2000 Manual of uniform traffic control devicesGeneral introduction and index of signsAustralian Road Rules supplement (Supplement to AS 1742.11991) AS 1742.21994 Manual of uniform traffic control devicesTraffic control devices for general use AS 1742.32002 Manual of uniform traffic control devicesTraffic control devices for works on roads AS 1742.42008 Manual of uniform traffic control devicesSpeed controls AS 1742.51997 Manual of uniform traffic control devicesStreet name and community facility name signs AS 1742.62004 Manual of uniform traffic control devicesTourist and services signs AS 1742.72007 Manual of uniform traffic control devicesRailway crossings AS 1742.81990 Manual of uniform traffic control devices Freeways AS 1742.92000 Manual of uniform traffic control devicesBicycle facilities AS 1742.101990 Manual of uniform traffic control devices Pedestrian control and protection AS 1742.111999 Manual of uniform traffic control devicesParking controls AS 1742.122000 Manual of uniform traffic control devicesBus, transit, tram and truck lanes AS 1742.131991 Manual of uniform traffic control devicesLocal area traffic management AS 1742.141996 Manual of uniform traffic control devicesTraffic signals AS 1742.152007 Manual of uniform traffic control devices Direction signs, information signs and route numbering AS 17432001 Road signsSpecifications AS 17441975 Forms of letters and numerals for road signs (known as Standard alphabets for road signs) AS/NZS 1906.1:2007 Retroreflective materials and devices for road traffic control purposesRetroreflective sheeting AS/NZS 1906.2:2007 Retroreflective materials and devices for road traffic control purposesRetroreflective devices (non-pavement application) AS 1906.31992 Retroreflective materials and devices for road traffic control purposesRaised pavement markers (retroreflective and non-retroreflective) AS/NZS 1906.4:1997 Retroreflective materials and devices for road traffic control purposesHigh visibility materials for safety garments AS/NZS 2009:2006 Glass beads for pavement-marking materials AS/NZS 2144:2002 Traffic signal lanterns AS/NZS 2276.1:2004 Cables for traffic signal installationsMulticore power cables AS/NZS 2276.2:1998 Cables for traffic signal installationsFeeder cable for vehicle detectors AS/NZS 2276.3:2002 Cables for traffic signal installationsLoop cables for vehicle detectors AS 23391997 Traffic signal posts and attachments AS 23531999 Pedestrian push-button assemblies AS 2578.11983 Traffic signal controllersPhysical and electrical compatibility AS 27032008 Vehicle loop detector sensors AS 2898.12003 Radar speed detectionFunctional requirements and definitions AS 2898.22003 Radar speed detectionOperational procedures AS 29791998 Traffic signal mast arms AS/NZS 3845:1999 Road safety barrier systems AS 39962006 Access covers and grates AS 4113.11993 Traffic signal lampsLamps for 240 V a.c. operation AS 4113.21993 Traffic signal lampsLamps for a.c. operation at extra-low voltage AS 41911994 Portable traffic signal systems
ROAD ENGINEERING
AS 41922006 Illuminated flashing arrow signs AS 4691.12003 Laser-based speed detection devicesDefinitions and device requirements AS 4691.22003 Laser-based speed detection devicesOperational procedures HB 69.131995 Guide to traffic engineering practicePedestrians HB 69.141999 Guide to traffic engineering practiceBicycles HB 81 (Set)2003 Field guides for traffic control complete Set HB 81.1 (Set)2003 Field guides for traffic controlShort-term urban works, daytime only, Set HB 81.1 (Set2)2003 Field guides for traffic controlShort-term urban works, daytime only, Set 2 HB 81.12003 Field guide for traffic control at works on roads Short-term urban works, daytime only HB 81.2 (Set)2003 Field guides for traffic controlShort-term rural works, daytime only, Set HB 81.2 (Set2)2003 Field guides for traffic controlShort-term rural works, daytime only, Set 2 HB 81.22003 Field guide for traffic control at works on roads Short-term rural works, daytime only HB 81.4 (Set)2003 Field guides for traffic controlShort term night works, Set HB 81.41998 Field guide for traffic control at works on roads Short-term night works HB 81.5 (Set)2003 Field guides for traffic controlWorks on unsealed roads, Set HB 81.51998 Field guide for traffic control at works on roads Works on unsealed roads HB 81.6 (Set)2003 Field guides for traffic controlBituminous surfacing on roads, Set HB 81.61998 Field guide for traffic control at works on roads Bituminous surfacing works HB 81.7 (Set)2003 Field guides for traffic controlShort-term works on freeways, Set HB 81.72000 Field guide for traffic control at works on roads Short-term works on freeways HB 81.8 (Set)2003 Field guides for traffic controlLong-term partial closures and detours on urban roads, Set HB 81.82000 Field guide for traffic control at works on roads Long-term partial closures and detours on urban roads HB 81.9 (Set)2003 Field guides for traffic controlLong-term partial closures and detours on rural roads, Set HB 81.92000 Field guide for traffic control at works on roads Long-term partial closures and detours on rural roads HB 191:2003 Guide to traffic engineering practice: Part 7Traffic signals Street lighting and related equipment AS/NZS 1158 Set:2007 Lighting for roads and public spaces Set AS/NZS 1158.0:2005 Lighting for roads and public spaces Introduction AS/NZS 1158.1.1:2005 Lighting for roads and public spaces Vehicular traffic (CategoryV) lightingPerformance and design requirements AS/NZS 1158.1.3:1997 Road lightingVehicular traffic (Category V) lightingGuide to design, installation, operation and maintenance AS/NZS 1158.2:2005 Lighting for roads and public spaces Computer procedures for the calculation of light technical parameters for Category V and Category P lighting AS/NZS 1158.3.1:2005 Lighting for roads and public spaces Pedestrian area (Category P) lightingPerformance and design requirements AS 1158.41987 The lighting of urban roads and other public thoroughfaresSupplementary lighting at pedestrian crossings AS/NZS 1158.5:2007 Lighting for roads and public spacesTunnels and underpasses AS/NZS 1158.6:2004 Lighting for roads and public spaces Luminaires AS 17981992 Lighting poles and bracket armsPreferred dimensions AS 37711998 Road lighting luminaires with integral control gear AS/NZS 4065:2000 Concrete utility services poles AS 42821997 Control of the obtrusive effects of outdoor lighting AS/NZS 4676:2000 Structural design requirements for utility services poles AS/NZS 4677:2000 Steel utility services poles
417
SUBJECT INDEX
AS/NZS 4613:1999 Automotive brake testing equipmentRoller brake tester AS 46491999 Brake shoe assemblies and disc brake pad assembliesAttachment AS 49452000 Commercial road vehiclesInterchangeable quick connect/release couplings for use with air-pressure braking systems Couplings AS 2174.12006 Heavy road vehiclesMechanical coupling between prime movers and semitrailersInterchangeability requirementsNon-dedicated vehicle combinations AS 2174.11994 Articulated vehiclesMechanical coupling between prime movers and semitrailersInterchangeability requirementsNon-dedicated vehicle combinations AS 2174.22006 Heavy road vehiclesMechanical coupling between prime movers and semitrailersInterchangeability requirementsDedicated vehicle combinations AS 2174.21994 Articulated vehiclesMechanical coupling between prime movers and semitrailersInterchangeability requirementsDedicated vehicle combinations AS 2213.12001 Commercial road vehiclesMechanical connections between towing vehiclesSelection and marking of pintype couplings and drawbar eyes AS 2213.22008 Commercial road vehiclesMechanical connections between towing vehicles50 mm pin-type couplings and drawbar eyes (ISO 1102:2001, MOD) AS 2213.32008 Commercial road vehiclesMechanical connections between towing vehicles40 mm pin-type couplings and drawbar eyes (ISO 8755:2001, MOD) AS 2213.42008 Commercial road vehiclesMechanical connections between towing vehiclesStrength tests for pin-type couplings and drawbar eyes for rigid drawbars (ISO 12357-1:1999, MOD) AS 2213.52008 Commercial road vehiclesMechanical connections between towing vehiclesStrength tests for pin-type couplings and drawbar eyes for hinged drawbars AS 3819.11998 Heavy duty towing components70 mm and 110 mm diameter towballs for heavy duty couplings AS 3819.21998 Heavy duty towing componentsHeavy duty coupling bodies for 70 mm and 110 mm towballs AS 4177.12004 Caravan and light trailer towing components Towbars and towing brackets AS 4177.22004 Caravan and light trailer towing components50 mm towballs AS 4177.32004 Caravan and light trailer towing components Coupling body for ball couplings AS 4177.42004 Caravan and light trailer towing components Safety chains up to 3500 kg capacity AS 4177.52004 Caravan and light trailer towing components Electrical connectors AS/NZS 4968.1:2003 Heavy-road vehiclesMechanical coupling between articulated vehicle combinationsDesign criteria and selection requirements for fifth wheel, kingpin and associated equipment AS/NZS 4968.2:2003 Heavy-road vehiclesMechanical coupling between articulated vehicle combinationsTesting and installation of fifth wheel and associated equipment AS/NZS 4968.3:2003 Heavy-road vehiclesMechanical coupling between articulated vehicle combinationsKingpins and associated equipment Crash protection and restraint systems AS 17531990 Webbing for restraining devices for occupants of motor vehicles AS/NZS 1754:2004 Child restraint systems for use in motor vehicles AS/NZS 1754:2000 Child restraint systems for use in motor vehicles AS/NZS 2596:2003 Seat belt assemblies for motor vehicles (ECE Regulation No. 16, MOD) AS/NZS 2596:1995 Seat belt assemblies for motor vehicles AS 29421994 Wheelchair occupant restraint assemblies for motor vehicles AS/NZS 3629.1:2004 Methods of testing child restraintsDynamic testing AS/NZS 3629.1:1999 Methods of testing child restraintsDynamic testing
HB 69.122004 Guide to traffic engineering practiceRoadway Lighting ROAD VEHICLE SYSTEMS Bodies and body components AS 17531990 Webbing for restraining devices for occupants of motor vehicles AS/NZS 1754:2004 Child restraint systems for use in motor vehicles AS/NZS 1754:2000 Child restraint systems for use in motor vehicles AS/NZS 2080:2006 Safety glazing for land vehicles AS/NZS 2080:1995 Safety glass for land vehicles AS/NZS 2366.1:1999 Windscreen repairsRepair procedures AS/NZS 2366.2:1999 Windscreen repairsRepair systems AS/NZS 2596:1995 Seat belt assemblies for motor vehicles AS 2662.11983 Corrosion inhibition (rust-proofing)Motor vehiclesProduct AS 2662.21988 Corrosion inhibition (rust-proofing)Motor vehiclesTreatment of vehicles AS 29421994 Wheelchair occupant restraint assemblies for motor vehicles AS/NZS 3629.1:2004 Methods of testing child restraintsDynamic testing AS/NZS 3629.1:1999 Methods of testing child restraintsDynamic testing AS/NZS 3629.2:1995 Methods of testing child restraints Determination of hazardous throat contact in abnormal situations AS/NZS 3629.3:1997 Methods of testing child restraintsDynamic testing of upper anchorage components AS/NZS 3629.4:1997 Methods of testing child restraints Determination of the force required to adjust a harness AS/NZS 3629.5:1995 Methods of testing child restraints Determination of quick-release device actuation force AS/NZS 3629.6:1998 Methods of testing child restraints Determination of recline angle AS/NZS 4034.1:2008 Motor vehiclesCargo barriers for occupant protectionCargo barriers AS/NZS 4034.2:2008 Motor vehiclesCargo barriers for occupant protectionPartial cargo barriers AS 4211.11996 Gas recovery or combined recovery and recycling equipmentFluorocarbon refrigerants from automotive airconditioning systems AS/NZS 4370:1996 Restraint of children with disabilities in motor vehicles AS/NZS 4384:1997 Motor vehiclesAnchorages and anchor points for securing internal cargo AS/NZS 4475.0:1997 Restraint systems for motor vehicles Performance testsIntroduction and list of methods AS/NZS 4475.1:1997 Restraint systems for motor vehicles Performance testsDetermination of webbing durability in adjustment duty AS/NZS 4475.2:1997 Restraint systems for motor vehicles Performance testsDetermination of webbing durability in withdrawing and retracting duty through a sash guide AS/NZS 4475.3:1997 Restraint systems for motor vehicles Performance testsDetermination of fatigue resistance of a flexible member AS/NZS 4475.4:1997 Restraint systems for motor vehicles Performance testsDetermination of adjustment device forces AS/NZS 4475.5:1997 Restraint systems for motor vehicles Performance testsDetermination of locking angle of a tilt-lock adjustment device AS/NZS 4475.6:1997 Restraint systems for motor vehicles Performance testsDetermination of free-end device strength AS/NZS 4535:1999 Ambulance restraint systems AS 4876.12002 Motor vehicle frontal protection systemsRoad user protection Braking systems AS 1960.12005 Motor vehicle brake fluidsNon-petroleum type AS/NZS 1960.2:1995 Motor vehicle brake fluidsSilicone type AS 36171997 Parameters for the machining and reconditioning of brake drums and discs AS 38391998 Evaluation of aftermarket disc pads for passenger vehicles and their derivatives
418
SUBJECT INDEX
AS/NZS 3629.2:1995 Methods of testing child restraints Determination of hazardous throat contact in abnormal situations AS/NZS 3629.3:1997 Methods of testing child restraintsDynamic testing of upper anchorage components AS/NZS 3629.4:1997 Methods of testing child restraints Determination of the force required to adjust a harness AS/NZS 3629.5:1995 Methods of testing child restraints Determination of quick-release device actuation force AS/NZS 3629.6:1998 Methods of testing child restraints Determination of recline angle AS 4001.12003 Motor vehiclesRear marker plates Manufacturing and classification requirements for Class 1A and Class 1 reflective plates AS 4001.22003 Motor vehiclesRear marker platesFitting requirements for Class 1A, Class 1 and Class 2 reflective plates AS 4001.32003 Motor vehiclesRear marker plates Manufacturing and classification requirements for Class 2 reflective plates AS/NZS 4034.1:2008 Motor vehiclesCargo barriers for occupant protectionCargo barriers AS/NZS 4034.2:2008 Motor vehiclesCargo barriers for occupant protectionPartial cargo barriers AS/NZS 4344:2001 Motor vehiclesCargo restraint systems Transport chain and components AS/NZS 4345:2001 Motor vehiclesCargo restraint systems Transport fibre rope AS/NZS 4370:1996 Restraint of children with disabilities in motor vehicles AS/NZS 4380:2001 Motor vehiclesCargo restraint systems Transport webbing and components AS/NZS 4384:1997 Motor vehiclesAnchorages and anchor points for securing internal cargo AS/NZS 4475.0:1997 Restraint systems for motor vehicles Performance testsIntroduction and list of methods AS/NZS 4475.1:1997 Restraint systems for motor vehicles Performance testsDetermination of webbing durability in adjustment duty AS/NZS 4475.2:1997 Restraint systems for motor vehicles Performance testsDetermination of webbing durability in withdrawing and retracting duty through a sash guide AS/NZS 4475.3:1997 Restraint systems for motor vehicles Performance testsDetermination of fatigue resistance of a flexible member AS/NZS 4475.4:1997 Restraint systems for motor vehicles Performance testsDetermination of adjustment device forces AS/NZS 4475.5:1997 Restraint systems for motor vehicles Performance testsDetermination of locking angle of a tilt-lock adjustment device AS/NZS 4475.6:1997 Restraint systems for motor vehicles Performance testsDetermination of free-end device strength AS/NZS 4535:1999 Ambulance restraint systems Electrical and electronic equipment AS 47352003 Heavy road vehiclesElectrical connectors for articulated vehicles Glazing and wiper systems AS/NZS 2080:2006 Safety glazing for land vehicles AS/NZS 2080:1995 Safety glass for land vehicles AS/NZS 2366.1:1999 Windscreen repairsRepair procedures AS/NZS 2366.2:1999 Windscreen repairsRepair systems AS 47392002 Direct glazed automotive glass replacementLight vehicles Lighting, signalling and warning devices AS/NZS 3749.1:2003 Intruder alarm systemsRoad vehicles Performance requirements AS/NZS 3749.2:1997 Intruder alarm systemsRoad vehicles Installation and maintenance Other road vehicle systems AS/NZS 4346:1995 Guide to the installation in vehicles of mobile communication equipment intended for connection to a cellular mobile telecommunication service (CMTS) Road vehicle systems in general AS/NZS 4601:1999 Vehicle immobilizers AS ISO 169492003 Quality management systemsParticular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
Transmissions, suspensions AS 16382008 Motor vehiclesLight alloy road wheels AS/NZS 4737:2002 Motor vehicles'I' beam steer axle camber adjustment ROAD VEHICLES IN GENERAL AS 27021984 AcousticsMethods for the measurement of road traffic noise MP 551988 Vehicle identification number (VIN) codes ROTATING MACHINERY AS/NZS 3584 Set:2007 Diesel engine systems for underground coal mines Set AS/NZS 3584.1:2008 Diesel engine systems for underground coal mines Fire protectedHeavy duty AS/NZS 3584.3:2005 Diesel engine systems for underground coal mines Maintenance Components for rotating machines AS 604702001 High-voltage alternating current contactors and contactor-based motor-starters Generating sets AS 27901989 Electricity generating setsTransportable (Up to 25 kW) AS/NZS 3010:2005 Electrical installationsGenerating sets Motors AS/NZS 60335.2.95:2005 Household and similar electrical appliancesSafetyParticular requirements for drives for vertically moving garage doors for residential use AS 60947.82005 Low-voltage switchgear and controlgearControl units for built-in thermal protection (PTC) for rotating electrical machines AS 61800.12007 Adjustable speed electrical power drive systemsGeneral requirementsRating specifications for low voltage adjustable speed d.c. power drive systems AS 61800.22004 Adjustable speed electrical power drive systemsGeneral requirementsRating specifications for low voltage adjustable frequency a.c. power drive systems AS 61800.32005 Adjustable speed electrical power drive systemsEMC requirements and specific test methods AS 61800.42007 Adjustable speed electrical power drive systemsGeneral requirementsRating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV AS 61800.62007 Adjustable speed electrical power drive systemsGuide for determination of types of load duty and corresponding current ratings Other standards related to rotating machinery AS 2625.12003 Mechanical vibrationEvaluation of machine vibration by measurements on non-rotating partsGeneral guidelines AS 2625.42003 Mechanical vibrationEvaluation of machine vibration by measurements on non-rotating partsIndustrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ Rotating machinery in general AS 1046.41991 Letter symbols for use in electrotechnology Symbols for quantities to be used for rotating electrical machines AS 1081.11990 AcousticsMeasurement of airborne noise emitted by rotating electrical machineryEngineering method for freefield conditions over a reflective plane AS 1081.21990 AcousticsMeasurement of airborne noise emitted by rotating electrical machinerySurvey method AS 1359.01998 Rotating electrical machinesGeneral requirementsIntroduction and list of Parts AS/NZS 1359.5:2004 Rotating electrical machinesGeneral requirementsThree-phase cage induction motorsHigh efficiency and minimum energy performance standards requirements AS/NZS 1359.5:2000 Rotating electrical machinesGeneral requirementsThree-phase cage induction motorsHigh efficiency and minimum energy performance standards requirements AS 1359.301997 Rotating electrical machinesGeneral requirementsPreferred outputs and frame sizes AS 1359.311997 Rotating electrical machinesGeneral requirementsThree-phase induction motorsOperation on unbalanced voltages AS 1359.1011997 Rotating electrical machinesGeneral requirementsRating and performance AS 1359.102.11997 Rotating electrical machinesGeneral requirementsMethods for determining losses and efficiency General
419
RUBBER
SUBJECT INDEX
AS 1683.252001 Methods of test for rubberDetermination of the resistance of vulcanized or thermoplastic rubbers to ozone crackingDynamic strain test AS 1683.262001 Methods of test for elastomersRubber, vulcanizedor thermoplasticAccelerated ageing and heat resistance tests AS/NZS 3889:1993 Rubber and plasticsAnalysis of multi-peak traces obtained in determinations of tear strength and adhesion strength RUBBER AND PLASTICS PRODUCTS Films and sheets AS 12721974 Unsintered PTFE tape for thread sealing applications AS 1366.21992 Rigid cellular plastics sheets for thermal insulationRigid cellular polyisocyanurate (RC/PIR) AS 24241991 Plastics building sheetsGeneral installation requirements and design of roofing systems AS/NZS 2648.1:1995 Underground marking tapeNon-detectable tape AS 4256.12006 Plastic roof and wall cladding materialsGeneral requirements AS/NZS 4256.1:1994 Plastic roof and wall cladding materials General requirements AS 4256.22006 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) building sheets AS/NZS 4256.2:1994 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) building sheets AS 4256.32006 Plastic roof and wall cladding materialsGlass fibre reinforced polyester (GRP) AS/NZS 4256.3:1994 Plastic roof and wall cladding materialsGlass fibre reinforced polyester (GRP) AS 4256.42006 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) wall cladding boards AS/NZS 4256.4:1995 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) wall cladding boards AS 4256.52006 Plastic roof and wall cladding materials Polycarbonate AS/NZS 4256.5:1996 Plastic roof and wall cladding materials Polycarbonate AS/NZS 4257.0:1994 Plastic roof and wall cladding materials Methods of testGeneral introduction and list of methods AS/NZS 4257.1:1994 Plastic roof and wall cladding materials Methods of testDetermination of dimensional properties AS/NZS 4257.2:1994 Plastic roof and wall cladding materials Methods of testDetermination of dimensional stability at 60C AS/NZS 4257.3:1994 Plastic roof and wall cladding materials Methods of testDetermination of mass per unit area of sheet AS/NZS 4257.4:1994 Plastic roof and wall cladding materials Methods of testDetermination of diffuse light transmission AS/NZS 4257.5:1994 Plastic roof and wall cladding materials Methods of testDetermination of glass fibre content AS/NZS 4257.6:1994 Plastic roof and wall cladding materials Methods of testDetermination of impact resistance AS/NZS 4257.7:1994 Plastic roof and wall cladding materials Methods of testDetermination of colourfastness, light transmission and impact resistance following ultraviolet light exposure AS/NZS 4257.8:1994 Plastic roof and wall cladding materials Methods of testDetermination of residual styrene AS/NZS 4257.9:1995 Plastic roof and wall cladding materials Methods of testDetermination of transverse bending stiffness AS/NZS 4257.10:1997 Plastic roof and wall cladding materials Methods of testDetermination of surface distortion (oil canning) AS/NZS 4275.0:1995 Methods of testing underground marking tapeGeneral introduction and list of methods AS/NZS 4275.1:1995 Methods of testing underground marking tapeElongation at break AS/NZS 4275.2:1995 Methods of testing underground marking tapeTear resistance AS/NZS 4275.3:1995 Methods of testing underground marking tapeImpact resistance AS/NZS 4275.4:1995 Methods of testing underground marking tapeChemical resistance AS/NZS 4275.5:1995 Methods of testing underground marking tapeBackground discolouration AS/NZS 4275.6:1995 Methods of testing underground marking tapeAdhesion of print Hoses AS 11791972 Glossary of terms for rubber hose
AS 1359.102.21997 Rotating electrical machinesGeneral requirementsMethods for determining losses and efficiency Calorimetric method AS/NZS 1359.102.3:2000 Rotating electrical machinesGeneral requirementsMethods for determining losses and efficiency Three-phase cage induction motors AS 1359.1061996 Rotating electrical machinesGeneral requirementsMethods of cooling (IC Code) AS 1359.1071996 Rotating electrical machinesGeneral requirementsClassification of types of construction and mounting arrangements (IM Code) AS 1359.1091998 Rotating electrical machinesGeneral requirementsNoise limits AS 1359.1141997 Rotating electrical machinesGeneral requirementsVibration measurements and limits AS 4307.11995 Rotating electrical machinesRepair and overhaulLow voltage machines RUBBER AS 1157.111999 Methods of testing materials for resistance to fungal growthResistance of rubbers and plastics to surface fungal growth AS 1683 (Pt 5 to 6)1974 Methods of test for elastomersFirst Group: Methods 5, 6 AS 1683.12002 Methods of test for elastomersRubber latexSampling AS 1683.22001 Methods of test for elastomersLatex, rubber Determination of total solids content AS 1683.32001 Methods of test for elastomersLatex, rubber, natural concentrateDetermination of dry rubber content AS 1683.41992 Methods of test for elastomersRubber, vulcanized Determination of density AS 1683.51974 Methods of test for rubberCoagulum content of rubber latices AS 1683.61974 Methods of test for rubberVolatile fatty acid number of natural rubber latex AS 1683.91992 Methods of test for elastomersRubber, vulcanized or thermoplasticDetermination of tension set at normal and high temperatures AS 1683.112001 Methods of test for elastomersTension testing of vulcanized or thermoplastic rubber AS 1683.122001 Methods of test for elastomersRubber, vulcanized or thermoplasticDetermination of tear strength (trouser, angle and crescent test pieces) AS 1683.131992 Methods of test for elastomersCompression set of vulcanized rubber under constant deflection AS 1683.14.12001 Methods of test for elastomersAdhesive strength of vulcanized or thermoplastic rubberOne-plate method AS 1683.14.22001 Methods of test for elastomersAdhesive strength of vulcanized or thermoplastic rubberTwo-plate method AS 1683.15.12000 Methods of test for elastomers- International rubber hardness AS 1683.15.21990 Methods of test for elastomers- Durometer hardness AS 1683.16.12001 Methods of test for elastomersDeterminations using a shearing-disc viscometerDetermination of Mooney viscosity AS 1683.16.22001 Methods of test for elastomersDeterminations using a shearing-disc viscometerDetermination of pre-vulcanizing characteristics AS 1683.16.32001 Methods of test for elastomersDeterminations using a shearing-disc viscometerDetermination of the Delta Mooney value for non-pigmented oil extended, emulsion-polymerized styrene-butadiene rubber AS 1683.172001 Methods of test for rubberDetermination of carbon black content of vulcanized rubberPyrolytic and chemical degradation methods AS 1683.182001 Methods of test for rubberDetermination of flex cracking and crack growth of vulcanized or thermoplastic rubber (De Mattia) AS 1683.192001 Methods of test for rubberPreparation, mixing and vulcanization of rubber test mixesEquipment and procedures AS 1683.202001 Methods of test for rubberStandard temperatures, humidities and times for conditioing and testing AS 1683.211982 Methods of test for rubberRubberVulcanized Determination of abrasion resistance using a rotating cylindrical device AS 1683.222001 Methods of test for rubberDetermination of vulcaniztion characteristics using the oscillating disc curemeter AS 1683.232000 Methods of test for elastomersRubberVulcanized Determination of resistance to liquids AS 1683.242001 Methods of test for rubberDetermination of the resistance of vulcanized or thermoplastic rubbers to ozone crackingStatic strain test
420
SUBJECT INDEX
AS 1180 (Pt 1 to 3, 4A to 4B, 6)1972 Methods of test for hose made from elastomeric materialsFirst group: Methods 1, 2, 3 4A, 4B, 6 AS 1180 (Pt 7A to 7D, 7F to 7G, 7J, 8A to 8B)1972 Methods of test for hose made from elastomeric materialsSecond Group: Methods 7A, 7B, 7C, 7D, 7F, 7G, 7J, 8A, 8B AS 1180.11972 Methods of test for hose made from elastomeric materialsDimensions AS 1180.21972 Methods of test for hose made from elastomeric materialsTensile strength and elongation AS 1180.31972 Methods of test for hose made from elastomeric materialsAccelerated ageing AS 1180.4A1972 Methods of test for hose made from elastomeric materialsPly adhesionDead weight method AS 1180.4B1972 Methods of test for hose made from elastomeric materialsPly adhesionAutographic method AS 1180.51999 Methods of test for hose made from elastomeric materialsHydrostatic pressure AS 1180.61972 Methods of test for hose made from elastomeric materialsImpulse test AS 1180.7A1972 Methods of test for hose made from elastomeric materialsResistance of hose lining and cover to liquids AS 1180.7B1972 Methods of test for hose made from elastomeric materialsResistance to liquidsPhysical AS 1180.7C1972 Methods of test for hose made from elastomeric materialsResistance to steam AS 1180.7D1972 Methods of test for hose made from elastomeric materialsResistance to detergent AS 1180.7F1972 Methods of test for hose made from elastomeric materialsResistance of lining and cover to ozone AS 1180.7G1972 Methods of test for hose made from elastomeric materialsCorrosion resistance AS 1180.7J1972 Methods of test for hose made from elastomeric materialsResistance to vacuum AS 1180.8A1972 Methods of test for hose made from elastomeric materialsResistance to cold flexing of hose assembly AS 1180.8B1972 Methods of test for hose made from elastomeric materialsResistance to cold flexing of hose lining and cover AS 1180.10A1974 Methods of test for hose made from elastomeric materialsResistance of hose lining or cover to flame AS 1180.10B1982 Methods of test for hose made from elastomeric materialsDetermination of combustion propagation characteristics of a horizontally oriented specimen of hose using surface ignition AS 1180.111982 Methods of test for hose made from elastomeric materialsHose and coupling compatibilityTensile method AS 1180.121974 Methods of test for hose made from elastomeric materialsResistance to ignition AS 1180.13A1983 Methods of test for hose made from elastomeric materialsDetermination of electrical resistance of hose and hose components AS 1180.13B1987 Methods of test for hose made from elastomeric materialsDetermination of electrical resistance of hose assembly AS 1180.13C1983 Methods of test for hose made from elastomeric materialsDetermination of electrical continuity of a hose assembly with reinforcing wire(s) AS 1180.141991 Methods of test for hose made from elastomeric materialsDetermination of reeling properties of non-collapsible hose AS 12571973 Bore sizes, test pressures and tolerances on lengths of elastomeric hose AS 22831990 Elastomeric hose and hose assemblies for steamcleaning machines AS 22841979 Safe working with elastomeric hose and hose assemblies for steam-cleaning machines AS 37911991 Hydraulic hose Laminated sheets AS/NZS 2924.1:1998 High pressure decorative laminatesSheets made from thermosetting resinsClassification and specifications AS/NZS 2924.2:1998 High pressure decorative laminatesSheets made from thermosetting resinsDetermination of properties AS 35711989 Glass filament reinforced thermosetting plastics (GRP) pipesPolyester basedWater supply, sewerage and drainage applications
AS/NZS 3572.18:1997 PlasticsGlass filament reinforced plastics (GRP)Methods of testMethod for determining the ultimate tensile strength and unit modulus of flat laminates AS/NZS 3572.19:1997 PlasticsGlass filament reinforced plastics (GRP)Methods of testMethod for the determination of the lap shear strength of laminate AS/NZS 3572.20:1997 PlasticsGlass filament reinforced plastics (GRP)Methods of testMethod for the determination of the peel strength of the bond between laminate layers AS/NZS 3572.21:1997 PlasticsGlass filament reinforced plastics (GRP)Methods of testMethod for the determination of the shear strength of a sandwich panel Other rubber and plastics products AS/NZS 3813:1998 Plastic monobloc chairs AS/NZS 4011:1997 Single-use examination glovesSpecification AS/NZS 4179:1997 Single-use sterile surgical rubber gloves Specification Plastics pipes and fittings for non fluid use AS/NZS 1462.1:2006 Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings AS/NZS 1462.2:2006 Methods of test for plastics pipes and fittings Method for determining the flattening properties of plastics pipes and fittings AS/NZS 1462.3:1998 Methods of test for plastics pipes and fittings Method for determining the impact characteristics of pipes AS/NZS 1462.4:2002 Methods of test for plastics pipes and fittings Method of determining reversion of UPVC pipes AS/NZS 1462.5:2002 Methods of testing plastics pipes and fittings Vicat softening temperature AS/NZS 1462.6:2008 Methods of test for plastics pipes and fittings Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressureResistance to internal pressure AS/NZS 1462.8:2008 Methods of test for plastics pipes and fittings Method of testing the leaktightness of assemblies AS/NZS 1462.10:1998 Methods of test for plastics pipes and fittingsMethod for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications AS/NZS 1462.11:1996 Methods of test for PVC pipes and fittings Method for high temperature stress-relief testing of fittings AS/NZS 1462.13:2006 Methods of test for plastics pipes and fittingsMethod for the determination of elastomeric seal joint contact width and pressure AS/NZS 1462.14:1996 Methods of test for PVC pipes and fittings Method for determination of the light transmission of pipe AS/NZS 1462.15:1996 Methods of test for PVC pipes and fittings Method for determination of vinyl chloride monomer content AS/NZS 1462.16:2006 Methods of test for plastics pipes and fittingsMethod for high temperature testing of pipe AS/NZS 1462.19:2006 Methods of test for plastics pipes and fittingsC-ring test for fracture toughness of PVC pipes AS/NZS 1462.20:1996 Methods of test for PVC pipes and fittings Method for the determination of long-term failure stress of PVC moulding compounds AS/NZS 1462.21:1997 Methods of test for plastics pipes and fittingsMethod for determination of bond strength AS/NZS 1462.22:1997 Methods of test for plastics pipes and fittingsMethod for the determination of pipe stiffness AS/NZS 1462.23:2006 Methods of test for plastics pipes and fittingsMethod for determination of ring flexibility AS 1462.242003 Methods of test for plastics pipes and fittings Determination of resistance to crack propagationTest methods for slow crack growth in notched pipes (notch test) AS/NZS 1462.25:2005 Methods of test for plastics pipes and fittingsDetermination of slow-crack-growth of PE (polyethylene) resinsNotched, constant ligament-stress (NCLS) method AS/NZS 1462.26:2003 Methods of test for plastics pipes and fittingsDetermination of weathering resistance of plastics pipes for external storage AS/NZS 1462.27:2003 Methods of test for plastics pipes and fittingsDetermination of toluene extract of carbon black AS/NZS 1462.28:2003 Method of test for plastics pipes and fittings Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds AS/NZS 1462.29:2006 Methods of test for plastics pipes and fittingsPlastics piping and ducting systemsDetermination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003, MOD) AS 14631988 Polyethylene pipe extrusion compounds
421
SACKS. BAGS
SUBJECT INDEX
AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt AS 4024.12006 Series Safety of machinery AS 4024.21998 Safeguarding of machineryInstallation and commissioning requirements for electro-sensitive systemsOptoelectronic devices AS 4024.31998 Safeguarding of machineryManufacturing and testing requirements for electro-sensitive systemsOptoelectronic devices AS 4024.41998 Safeguarding of machineryInstallation and commissioning requirements for electro-sensitive systemsPressure-sensitive devices AS 4024.51998 Safeguarding of machineryManufacturing and testing requirements for electro-sensitive systemsPressure-sensitive devices AS 4024.11012006 Safety of machineryTerminologyTerms and definitions AS 4024.12012006 Safety of machineryGeneral principlesBasic terminology and methodology AS 4024.12022006 Safety of machineryGeneral principlesTechnical principles AS 4024.13012006 Safety of machineryRisk assessmentPrinciples of risk assessment AS 4024.13022006 Safety of machineryRisk assessmentReduction of risks to health and safety from hazardous substances emitted by machineryPrinciples and specifications for machinery manufacturers AS 4024.14012006 Safety of machineryErgonomic principlesDesign principlesTerminology and general principles AS 4024.15012006 Safety of machineryDesign of safety related parts of control systemsGeneral principles for design AS 4024.15022006 Safety of machineryDesign of safety related parts of control systemsValidation AS 4024.16012006 Safety of machineryDesign of controls, interlocks and guardingGuardsGeneral requirements for the design and construction of fixed and movable guards AS 4024.16022006 Safety of machineryInterlocking devices associated with guardsPrinciples for design and selection AS 4024.16032006 Safety of machineryDesign of controls, interlocks and guardsPrevention of unexpected start-up AS 4024.16042006 Safety of machineryDesign of controls, interlocks and guardingEmergency stopPrinciples for design AS 4024.17012006 Safety of machineryHuman body measurements Basic human body measurements for technological design AS 4024.17022006 Safety of machineryHuman body measurements Principles for determining the dimensions required for openings for whole body access into machinery AS 4024.17032006 Safety of machineryPrinciples for determining the dimensions required for access openings AS 4024.17042006 Safety of machineryHuman body measurements Anthropometric data AS 4024.18012006 Safety of machinerySafety distances to prevent danger zones being reached by the upper limbs AS 4024.18022006 Safety of machinerySafety distances and safety gapsSafety distances to prevent danger zones being reached by the lower limbs AS 4024.18032006 Safety of machinerySafety distances and safety gapsMinimum gaps to prevent crushing of parts of the human body AS 4024.19012006 Safety of machineryDisplays, controls, actuators and signalsErgonomic requirements for the design of displays and control actuatorsGeneral principles for human interactions with displays and control actuators AS 4024.19022006 Safety of machineryDisplays, controls, actuators and signalsErgonomic requirements for the design of displays and control actuatorsDisplays AS 4024.19032006 Safety of machineryDisplays, controls, actuators and signalsErgonomic requirements for the design of displays and control actuatorsControl actuators AS 4024.19042006 Safety of machineryDisplays, controls, actuators and signalsIndication, marking and actuationRequirements for visual, auditory and tactile signals AS 4024.19052006 Safety of machineryDisplays, controls, actuators and signalsIndication, marking and actuationRequirements for marking AS 4024.19062006 Safety of machineryDisplays, controls, actuators and signalsIndication, marking and actuationRequirements for the location and operation of actuators AS 4024.19072006 Safety of machineryDisplays, controls, actuators and signalsSystem of auditory and visual danger and information signals AS 4024.26012008 Safety of machineryDesign of controls, interlocks and guardingTwo-hand control devicesFunctional aspects and design principles
AS/NZS 2642.1:2007 Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe extrusion compounds AS/NZS 2642.1:1994 Polybutylene pipe systemsPolybutylene (PB) pipe extrusion compounds AS/NZS 2642.2:2008 Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe for hot and cold water applications AS 29432007 Plastics pipes and fittings for gas reticulation Polyamide compounds AS 36901989 Installation of ABS pipe systems AS 36911989 Solvent cement and priming (cleaning) fluids for use with ABS pipes and fittings AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings AS/NZS 4131:2003 Polyethylene (PE) compounds for pressure pipes and fittings AS 5082.12007 Polybutylene (PB) plumbing pipe systemsMetric seriesMetric polybutylene (PB) pipes for hot and cold water applications AS 5082.22007 Polybutylene (PB) plumbing pipe systemsMetric seriesMechanical and fusion jointing systems AS ISO 6993.12007 Buried, high-impact poly(vinyl chloride) (PVCHI) piping systems for the supply of gaseous fuelsPipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 69931:2006, MOD) AS ISO 6993.22007 Buried, high-impact poly(vinyl chloride) (PVCHI) piping systems for the supply of gaseous fuelsFittings for a maximum operating pressure of 200 mbar (20 kPa) AS ISO 6993.32007 Buried, high-impact poly(vinyl chloride) (PVCHI) piping systems for the supply of gaseous fuelsFittings and saddles for a maximum operating pressure of 1 bar (100 kPa) Rubber and plastics products in general AS 11951973 Polytetrafluoroethylene (PTFE) skived tape AS 11961973 Polytetrafluoroethylene (PTFE) moulded sheet AS 11971973 Polytetrafluoroethylene (PTFE) moulded basic shapes AS 11981973 Polytetrafluoroethylene (PTFE) extruded rod and tube AS 17941975 Commercial tolerances on finished parts of fluorocarbon HB 37.31993 Handbook of Australian fire StandardsPlastics and rubberMaterials and products SACKS. BAGS AS 2400.81989 PackagingTextile bags, sacks and wrappings SAFETY OF MACHINERY AS 12191994 Power pressesSafety requirements AS 14731991 Guarding and safe use of woodworking machinery AS 1473.12000 Woodprocessing machineryPrimary timber milling machinery AS 1473.22001 Woodprocessing machinerySafetyFinishing machinery Common requirements AS 1473.32001 Wood processing machinerySafetyFinishing machinery Circular sawing machines AS 1473.42001 Wood processing machinerySafetyFinishing machinery Bandsawing machines AS 1473.52001 Wood processing machinerySafetyFinishing machinery Moulding machines and routers with rotating tool AS 1473.62005 Wood processing machinerySafetyFinishing machinery Surface planing and thicknessing machines AS 1473.72005 Wood processing machinerySafetyFinishing machinery Tenoning, profiling and edge-banding machines AS 1473.82007 Wood processing machinerySafetyFinishing machinery Milling tools and circular saw blades AS 18931977 Code of practice for the guarding and safe use of metal and paper cutting guillotines AS 26611983 Vapour degreasing plantDesign, installation and operation Safety requirements AS 2726.22004 ChainsawsSafety requirementsChainsaws for tree service AS 2958.11995 Earth-moving machinerySafetyWheeled machines Brakes AS 2958.31992 Earth-moving machinerySafetyRoller compactorsBrake systems AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules) AS/NZS 3000T (H) Set:2008 AS/NZS 3000, Wiring Rules (Hardbound) + Electrical Standards + FREE T-shirt
422
SUBJECT INDEX
AS 4024.28012008 Safety of machinerySafety distances and safety gapsPositioning of protective equipment with respect to the approach speed of parts of the human body AS 4024.31012008 Safety of machineryMaterials cuttingMilling machines (including boring machines)Safety requirements AS 60204.112006 Safety of machineryElectrical equipment of machines Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 60204-11, Ed. 1.0 (2000) MOD) AS 61508 Set2005 Functional safety of electrical/electronic/programmable electronic safety-related systems Set AS 61508.02006 Functional safety of electrical/electronic/programmable electronic safety-related systemsFunctional safety and AS 61508 AS 61508.11999 Functional safety of electrical/electronic/programmable electronic safety-related systemsGeneral requirements AS 61508.22001 Functional safety of electrical/electronic/programmable electronic safety-related systemsRequirements for electrical/electronic/programmable electronic safety-related systems AS 61508.31999 Functional safety of electrical/electronic/programmable electronic safety-related systemsSoftware requirements AS 61508.41999 Functional safety of electrical/electronic/programmable electronic safety-related systemsDefinition and abbreviations AS 61508.51999 Functional safety of electrical/electronic/programmable electronic safety-related systemsExamples of methods for the determination of safety integrity levels AS 61508.62001 Functional safety of electrical/electronic/programmable electronic safety-related systemsGuidelines on the application of AS 61508.2 and AS 61508.3 AS 61508.72001 Functional safety of electrical/electronic/programmable electronic safety-related systemsOverview of techniques and measures AS IEC 61511.12004 Functional safetySafety instrumented systems for the process industry sectorFramework, definitions, systems, hardware and software requirements AS IEC 61511.22004 Functional safetySafety instrumented systems for the process industry sectorGuidelines for the application of AS IEC 61511-1 AS IEC 61511.32004 Functional safetySafety instrumented systems for the process industry sectorGuidance for the determination of the required safety integrity levels AS 620612006 Safety of machineryFunctional safety of safety-related electrical, electronic and programmable electronic control systems HB 61999 Design Standards for mechanical engineering students SCREW THREADS Inch screw threads AS 35011987 Parallel screw threads of Whitworth form (BSW and BSF) and associated gauges and gauging practice AS 36351990 Unified (ISO inch) screw threads, associated gauges, and gauging practice Metric screw threads AS 10141986 Gauging of metric screw threads AS 12751985 Metric screw threads for fasteners AS 17211985 General purpose metric screw threads Screw threads in general AS B1991962 Undercuts and runouts for screw threads Special screw threads AS ISO 7.12008 Pipe threads where pressure-tight joints are made on the threadsDimensions, tolerances and designation AS ISO 7.22008 Pipe threads where pressure-tight joints are made on the threadsVerification by means of limit gauges AS 1722.21992 Pipe threads of Whitworth formFastening pipe threads AS 35281988 Cylindrical screw threadsVocabulary AS/NZS 4411:1996 Tapping screws thread SEAGOING VESSELS AS/NZS 3750.20:2008 Paints for steel structuresAnticorrosive metal primerSolvent-borneLead and chromate free AS/NZS 3750.21:2008 Paints for steel structuresUndercoatSolvent-borne AS/NZS 3750.22:2008 Paints for steel structuresFull gloss enamel Solvent-borne AS/NZS 3750.23:2008 Paints for steel structuresSemi-gloss enamel Solvent-borne AS 37621990 Measurement and reporting of local vibration data of ship structures and equipment AS 37631990 Mechanical vibration and shockGuidelines for the overall evaluation of vibration in merchant ships AS 37641990 The measurement and reporting of shipboard vibration data AS 4132.11993 Boat and ship design and constructionDesign loadings
SCREW THREADS
AS 4132.21993 Boat and ship design and constructionAluminium construction AS 4132.31993 Boat and ship design and constructionFibre-reinforced plastics construction SEMI-MANUFACTURES OF TIMBER AS 1684.3 C2 Supplement 42006 Residential timber-framed construction Cyclonic areasC2 Supplement 4: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade MGP10 (Supplement to AS1684.32006) AS 17291994 TimberHandles for tools AS 18101995 TimberSeasoned cypress pineMilled products AS/NZS 2857:1996 Timber drums for insulated electric cables and bare conductors AS 4786.22005 Timber flooringSanding and finishing AS 50672003 TimberNon-structural glued laminatedPerformance and production requirements SEMICONDUCTOR DEVICES Semiconductor devices in general AS/NZS 1102.105:1997 Graphical symbols for electrotechnical documentationSemiconductors and electron tubes AS 1852.5211988 International electrotechnical vocabulary Semiconductor devices and integrated circuits AS 60146.1.12002 Semiconductor convertersGeneral requirements and line commutated convertersSpecifications of basic requirements AS 60146.1.22002 Semiconductor convertersGeneral requirements and line commutated convertersApplication guide AS 60146.1.32002 Semiconductor convertersGeneral requirements and line commutated convertersTransformers and reactors AS 60146.22001 Semiconductor convertersSelf-commutated semiconductor converters including direct d.c. converters SENSORY ANALYSIS AS 2542.1.12005 Sensory analysisGeneral guide to methodologyTypes of test AS 2542.1.31995 Sensory analysis of foodsGeneral guide to methodologySelection of assessors AS 2542.2.12007 Sensory analysisSpecific methodsPaired comparison test AS 2542.2.22005 Sensory analysisSpecific methods AS 2542.2.32007 Sensory analysisSpecific methodsGuidelines for the use of quantitative response scales (rating) AS 2542.2.42005 Sensory analysisSpecific methods AS 2542.2.51991 Sensory analysis of foodsSpecific methods'Anot A' test AS 2542.2.61995 Sensory analysis of foodsSpecific methodsRanking AS 2542.31989 Sensory analysis of foodsGlossary of terms AS 2609.12005 Methods for assessing modifications to the flavour of foodstuffs due to packagingSensory analysis SERVICES Industrial services AS/NZS 3733:1995 Textile floor coveringsCleaning maintenance of residential and commercial carpeting AS/NZS 4146:2000 Laundry practice Services for companies TR 48872008 Call centre standards scoping study Services for consumers AS/NZS 4146:2000 Laundry practice AS 42691995 Complaints handling AS/NZS 4286:1995 Single-service cloth towels AS 4349.02007 Inspection of buildingsGeneral requirements AS 4349.12007 Inspection of buildingsPre-purchase inspections Residential buildings AS 4349.31998 Inspection of buildingsTimber pest inspections AS/NZS 4360 COMPANION SET:2008 AS/NZS 4360 Companion Set AS 46082004 Dispute management systems AS 48602007 Knowledge-based identity authentication Recognizing Known Customers AS ISO 100022006 Customer satisfactionGuidelines for complaints handling in organizations (ISO 10002:2004, MOD) CUSTOMER SATISFACTION SET2006 Customer Satisfaction Set HB 2292006 The why and how of complaints handling
423
SUBJECT INDEX
Piping systems AS 13451995 Identification of the contents of pipes, conduits and ducts SHOP FITTINGS Commercial refrigerating appliances AS 17311983 Frozen food retail cabinets AS 1731.12003 Refrigerated display cabinetsTerms and definitions AS 1731.22003 Refrigerated display cabinetsGeneral mechanical and physical requirements AS 1731.32003 Refrigerated display cabinetsLinear dimensions, areas and volumes AS 1731.42003 Refrigerated display cabinetsGeneral test conditions AS 1731.52003 Refrigerated display cabinetsTemperature test AS 1731.62003 Refrigerated display cabinetsClassification according to temperatures AS 1731.72003 Refrigerated display cabinetsDefrosting test AS 1731.82003 Refrigerated display cabinetsWater vapour condensation test AS 1731.92003 Refrigerated display cabinetsElectrical energy consumption test AS 1731.102003 Refrigerated display cabinetsTest for absence of odour and taste AS 1731.112003 Refrigerated display cabinetsInstallation, maintenance and user guide AS 1731.122003 Refrigerated display cabinetsMeasurement of the heat extraction rate of the cabinets when the condensing unit is remote from the cabinet AS 1731.132003 Refrigerated display cabinetsTest report AS 1731.142003 Refrigerated display cabinetsMinimum energy performance standard (MEPS) requirements AS 26051983 Freezer test packages AS/NZS 3350.2.24:2001 Safety of household and similar electrical appliances- Particular requirements for refrigerating appliances and ice-cream appliances and ice-makers (IEC 60335-224:2000, MOD) AS 4211.31996 Gas recovery or combined recovery and recycling equipmentFluorocarbon refrigerants from commercial/domestic refrigeration and airconditioning systems AS/NZS 4776.1.1:2008 Liquid-chilling packages using the vapour compression cycleMethod of rating and testing for performanceRating AS/NZS 4776.1.2:2008 Liquid-chilling packages using the vapour compression cycleMethod of rating and testing for performanceTesting AS/NZS 4776.2:2008 Liquid-chilling packages using the vapour compression cycleMinimum energy performance standard (MEPS) and compliance requirements AS/NZS 4864.1:2008 Performance of refrigerated beverage vending machinesTest methodsEnergy performance AS/NZS 4864.2:2008 Performance of refrigerated beverage vending machinesMinimum energy performance standard (MEPS) requirements AS/NZS 4865.1:2008 Performance of commercial ice makers and ice storage binsTest methods for ice makersEnvironmental performance AS/NZS 4865.2:2008 Performance of commercial ice makers and ice storage binsTest methods for ice storage bins Environmental performance AS/NZS 4865.3:2008 Performance of commercial ice makers and ice storage binsMinimum energy performance standard (MEPS) requirements AS/NZS 4965.1:2008 Performance of close control airconditioners Testing for rating AS/NZS 4965.2:2008 Performance of close control airconditioners Minimum energy performance standard (MEPS) requirements AS/NZS 60335.2.24:2003 Household and similar electrical appliancesSafety- Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers AS/NZS 60335.2.89:2002 Household and similar electrical appliancesSafetyParticular requirementsParticular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor AS/NZS 60335.2.94:2002 Household and similar electrical appliancesSafetyParticular requirementsParticular requirements for scissor type grass shears
HB 2512004 Customer Satisfaction MeasurementA handbook for users of AS/NZS ISO 9001:2000 SEWING MACHINES AND OTHER EQUIPMENT FOR THE CLOTHING INDUSTRY AS/NZS 3350.2.28:1996 Safety of household and similar electrical appliancesParticular requirementsSewing machines AS/NZS 60335.2.28:2006 Household and similar electrical appliances SafetyParticular requirements for sewing machines (IEC 60335-2-28 Ed 4, IDT) SHAFTS AND COUPLINGS Keys and keyways, splines AS B2121968 Straight sided splines AS B2131966 Involute splines AS B2651968 Involute serrations Shafts AS 14032004 Design of rotating steel shafts SHIPBUILDING AND MARINE STRUCTURES IN GENERAL Electrical equipment of ships and of marine structures AS 11501983 Artificial illumination in ships AS/NZS 3004.1:2008 Electrical installationsMarinas and recreational boatsMarinas AS/NZS 3004.2:2008 Electrical installationsMarinas and recreational boatsRecreational boats installations AS 60092.3502005 Electrical installations in shipsShipboard power cablesGeneral construction and test requirements AS 60092.3512005 Electrical installations in shipsInsulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables AS 60092.3532005 Electrical installations in shipsSingle and multicore non-radial field power cables with extruded solid insulation for rated voltages 1kV and 3kV AS 60092.3542005 Electrical installations in shipsSingle- and three-core power cables with extruded solid insulation for rated voltages 6kV (Um = 7,2kV) up to 30kV (Um = 36kV) AS 60092.3592005 Electrical installations in shipsSheathing materials for shipboard power and telecommunication cables AS 60092.3762005 Electrical installations in shipsCables for control and instrumentation circuits 150/250V (300V) General standards related to shipbuilding and marine structures AS 39622001 Guidelines for design of marinas AS 4132.11993 Boat and ship design and constructionDesign loadings AS 4132.21993 Boat and ship design and constructionAluminium construction AS 4132.31993 Boat and ship design and constructionFibrereinforced plastics construction AS 49972005 Guidelines for the design of maritime structures MARITIME STRUCTURES SET2005 Maritime Structures Set Hulls and their structure elements AS 29331987 ShipbuildingPilot ladders Marine engines and propulsion systems AS/NZS 2557:1999 Limits and methods of measurement of radio interference characteristics of vehicles, motor boats and sparkignited engine-driven devices AS 47322002 LP Gas fuel systems for marine engines Marine ventilation, air conditioning and heating systems AS 19211976 Airconditioning and ventilation in ships' cabins and living spaces of merchant ships Materials and components for shipbuilding AS/NZS 2272:2006 PlywoodMarine Navigation and control equipment AS/NZS 4432:1996 Radar transponders for marine search and rescue (SART)Operational and performance requirements and methods of test AS 4451.11997 Small craftSteering systemsWire rope and pulley systems for sailing craft AS 4451.21997 Small craftSteering systemsRemote push-pull cable systems AS 4451.31997 Small craftSteering systemsRemote systems for single outboard motors of 15 kW to 40 kW power AS 4451.41997 Small craftSteering systemsHydraulic steering systems for craft up to 24 m hull length AS/NZS 4869.1:2006 Maritime Survivor Locating Systems (MSLS) Operating on 121.5 MHz
424
SUBJECT INDEX
AS/NZS 60335.2.101:2002 Household and similar electrical appliancesSafetyParticular requirementsParticular requirements for vaporizers Other shop fittings AS/NZS 4829:2006 Stand alone retail display devices (retail spinners) Trolleys for supermarket purposes AS/NZS 3847.1:1999 Shopping trolleysFor general use SIEVING see PARTICLE SIZE ANALYSIS. SIEVING SMALL CRAFT AS 1799.11992 Small Pleasure Boats CodeGeneral requirements for power boats AS 1799.51990 Small pleasure boats codeAluminium construction AS 22611990 Rescue buoys AS 26771983 Inflatable boats AS/NZS 3004.1:2008 Electrical installationsMarinas and recreational boatsMarinas AS/NZS 3004.2:2008 Electrical installationsMarinas and recreational boatsRecreational boats installations AS 35421996 Pleasure boatsToilet waste collection, holding and transfer systems AS 4132.11993 Boat and ship design and constructionDesign loadings AS 4132.21993 Boat and ship design and constructionAluminium construction AS 4132.31993 Boat and ship design and constructionFibre-reinforced plastics construction AS 43931996 Small craftHull identificationCoding system AS 4451.11997 Small craftSteering systemsWire rope and pulley systems for sailing craft AS 4451.21997 Small craftSteering systemsRemote push-pull cable systems AS 4451.31997 Small craftSteering systemsRemote systems for single outboard motors of 15 kW to 40 kW power AS 4451.41997 Small craftSteering systemsHydraulic steering systems for craft up to 24 m hull length AS 4758.12008 Personal flotation devicesGeneral requirements AS 4758.22008 Personal flotation devicesMaterials and components Requirements and test methods SOCIOLOGY. DEMOGRAPHY AS ISO 202522007 Market, opinion and social researchVocabulary and service requirements (ISO 20252:2006, MOD) SOFTWARE AS 1189.71991 Data processingVocabularyComputer programming AS 1189.201991 Data processingVocabularySystem development AS 26451987 Information processingDocumentation symbols and conventions for data, program and system flowcharts, program network charts and systems resources charts AS 36111993 Glossary of software engineering terminology AS 38751991 Information technologyProgram constructs and conventions for their representation AS 38761991 Information processingGuidelines for the documentation of computer-based application systems AS 38971991 Information processingGuidelines for the management of software documentation AS 38981991 Information processingUser documentation and cover information for consumer software packages AS 3925.11994 Software quality assurancePlans AS 40061992 Software test documentation AS 40081992 Software design description AS 40091992 Software reviews and audits AS 40421992 Software configuration management plans AS 40431992 Software configuration management AS 40711992 Software project management plans AS/NZS 4258:1994 Software user documentation process AS/NZS 4366:1996 Information technologySoftware packagesQuality requirements and testing AS/NZS 4598.1:1999 Guide to the development of application software Software user documentation AS/NZS 4598.2:1999 Guide to the development of application softwareOnscreen documentation AS 46512004 Standard metamodel for software development methodologies AS/NZS ISO/IEC 9126.1:2005 Software engineeringProduct quality Quality model
SIEVING
AS/NZS ISO/IEC 9126.2:2005 Software engineeringProduct quality External metrics AS/NZS ISO/IEC 9126.3:2005 Software engineeringProduct quality Internal metrics AS/NZS ISO/IEC 9126.4:2005 Software engineeringProduct quality Quality in use metrics AS/NZS ISO/IEC 12207:1997 Information technologySoftware life cycle processes AS/NZS 14102:1998 Information technologyGuideline for evaluation and selection of CASE tools AS/NZS 14143.1:1999 Information technologySoftware measurement Functional size measurementDefinition of concepts AS/NZS 14143.2:2003 Information technologySoftware measurement Functional size measurementConformity evaluation of software size measurement methods to AS/NZS 14143.1:1999 AS/NZS ISO/IEC 14143.3:2004 Information technologySoftware measurementFunctional size measurementVerification of functional size measurement methods AS/NZS 14143.4:2003 Information technologySoftware measurement Functional size measurementReference model AS/NZS ISO/IEC 14143.5:2004 Information technologySoftware measurementFunctional size measurementDetermination of functional domains for use with functional size measurement AS/NZS ISO/IEC 14143.6:2006 Information technologySoftware measurementFunctional size measurementGuide for use of ISO/IEC 14143 series and related International Standards AS/NZS 14598.1:2000 Information technologySoftware product evaluation General overview AS/NZS 14598.2:2000 Information technologySoftware product evaluation Planning and management AS/NZS 14598.3:2000 Information technologySoftware product evaluation Process for developers AS/NZS 14598.4:2000 Information technologySoftware product evaluation Process for acquirers AS/NZS 14598.5:2000 Information technologySoftware product evaluation Process for evaluators AS/NZS 14598.6:2001 Information technologySoftware product evaluation Documentation of evaluation modules AS/NZS 14756:2001 Information technologyMeasurement and rating of performance of computer-based software systems AS/NZS 14764:2001 Information technologySoftware maintenance AS/NZS 15026:1999 Information technologySystem and software integrity levels AS/NZS 15271:1999 Guide for AS/NZS ISO/IEC 12207 ([Information technologySoftware life cycle processes) AS/NZS 15288:2003 Systems engineeringSystem life cycle processes AS/NZS ISO/IEC 15289:2007 Systems and software engineeringContent of systems and software life cycle process information products (Documentation) AS/NZS ISO/IEC 15414:2003 Information technologyOpen distributed processingReference modelEnterprise language AS/NZS ISO/IEC 15437:2003 Information technologyOpen distributed processingEnhancements to LOTOS (E-LOTOS) AS/NZS ISO/IEC 15474.1:2003 Information technologyCDIF framework Overview AS/NZS ISO/IEC 15474.2:2003 Information technologyCDIF framework Modelling and extensibility AS/NZS ISO/IEC 15475.1:2003 Information technologyCDIF transfer formatGeneral rules for syntaxes and encodings AS/NZS ISO/IEC 15475.2:2003 Information technologyCDIF transfer formatSyntax SYNTAX.1 AS/NZS ISO/IEC 15475.3:2003 Information technologyCDIF transfer formatEncoding ENCODING.1 AS/NZS ISO/IEC 15476.1:2003 Information technologyCDIF semantic metamodelFoundation AS/NZS ISO/IEC 15476.2:2003 Information technologyCDIF semantic metamodelCommon AS/NZS ISO/IEC 15476.3:2006 Information technologyCDIF semantic metamodelData definitions AS/NZS ISO/IEC 15476.4:2007 Information technologyCDIF semantic metamodelData models AS/NZS ISO/IEC 15476.6:2007 Information technologyCDIF semantic metamodelState/event models AS/NZS ISO/IEC 15504.1:2005 Information technologyProcess assessmentConcepts and vocabulary AS/NZS ISO/IEC 15504.2:2004 Information technologyProcess assessmentPerforming an assessment
425
SUBJECT INDEX
AS 4969.42008 Analysis of acid sulfate soilDried samples Methods of testDetermination of 1 M potassium chloride extractable sulfur (SKCl), calcium (CaKCl) and magnesium (MgKCl) AS 4969.52008 Analysis of acid sulfate soilDried samples Methods of testDetermination of peroxide sulfur (SP), calcium (CaP) and magnesium (MgP) AS 4969.62008 Analysis of acid sulfate soilDried samples Methods of testDetermination of acid extractable sulfur in soil residue after peroxide oxidation (SRAS) AS 4969.72008 Analysis of acid sulfate soilDried samples Methods of testDetermination of chromium reducible sulfur (SCR) AS 4969.82008 Analysis of acid sulfate soilDried samples Methods of testDetermination of hydrochloric acid extractable sulfur (SHCl), calcium (CaHCl) and magnesium (MgHCl) AS 4969.92008 Analysis of acid sulfate soilDried samples Methods of testCalculation of titratable sulfidic acidity (TSA) AS 4969.102008 Analysis of acid sulfate soilDried samples Methods of testCalculation of peroxide oxidizable sulfur (SPOS), reacted calcium (CaA) and reacted magnesium (MgA) AS 4969.112008 Analysis of acid sulfate soilDried samples Methods of testCalculation of net acid-soluble sulfur (SNAS), calcium (CaNAS) and magnesium (MgNAS) Examination of soils in general AS 1289.02000 Methods of testing soils for engineering purposes General requirements and list of methods AS 1289.1.12001 Methods of testing soils for engineering purposesSampling and preparation of soilsPreparation of disturbed soil samples for testing AS 1289.1.2.11998 Methods of testing soils for engineering purposesSampling and preparation of soilsDisturbed samples Standard method AS 1289.1.3.11999 Methods of testing soils for engineering purposesSampling and preparation of soilsUndisturbed samplesStandard method AS 1289.1.4.11998 Methods of testing soils for engineering purposesSampling and preparation of soilsSelection of sampling or test sitesRandom number method AS 1289.1.4.21998 Methods of testing soils for engineering purposesSampling and preparation of soilsSelection of sampling or test sitesStratified random number method AS 1289.2.1.12005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilOven drying method (standard method) AS 1289.2.1.22005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilSand bath method (subsidiary method) AS 1289.2.1.42005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilMicrowave-oven drying method (subsidiary method) AS 1289.2.1.52005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilInfrared lights method (subsidiary method) AS 1289.2.1.62005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilHotplate drying method AS 1289.2.2.11998 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the total suction of a soilStandard method AS 1289.2.3.11998 Methods of testing soils for engineering purposesSoil moisture content testsEstablishment of correlation Subsidiary method and the standard method AS 1289.3.1.11995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the liquid limit of a soilFour point Casagrande method AS 1289.3.1.21995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the liquid limit of a soilOne point Casagrande method (subsidiary method) AS 1289.3.2.11995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the plastic limit of a soilStandard method AS 1289.3.3.11995 Methods of testing soils for engineering purposesSoil classification testsCalculation of the plasticity index of a soil AS 1289.3.3.21995 Methods of testing soils for engineering purposesSoil classification testsCalculation of the cone plasticity index of a soil
AS/NZS ISO/IEC 15504.3:2004 Information technologyProcess assessmentGuidance on performing an assessment AS/NZS ISO/IEC 15504.4:2005 Information technologyProcess assessmentGuidance on use for process improvement and process capability determination AS/NZS ISO/IEC 15504.5:2006 Information technologyProcess AssessmentAn exemplar Process Assessment Model AS/NZS ISO/IEC 15909.1:2006 Software and system engineeringHighlevel Petri netsConcepts, definitions and graphical notation AS/NZS ISO/IEC 15910:2004 Information technologySoftware user documentation process AS/NZS 15939:2003 Software engineeringSoftware measurement process AS/NZS ISO/IEC 16085:2007 Information technologySystems and software engineeringLife cycle processesRisk management AS/NZS ISO/IEC 16326:2006 Software engineeringGuide for the application of ISO/IEC 12207 to project management AS/NZS ISO/IEC 18019:2007 Software and system engineeringGuidelines for the design and preparation of user documentation for application software AS/NZS ISO/IEC 19500.2:2007 Information technologyOpen Distributed ProcessingGeneral Inter-ORB Protocol (GIOP)/Internet Inter-ORB Protocol (IIOP) AS/NZS ISO/IEC 19759:2007 Software EngineeringGuide to the Software Engineering Body of Knowledge (SWEBOK) AS/NZS ISO/IEC 19760:2007 Software engineeringA guide for the application of AS/NZS ISO/IEC 15288 (System life cycle processes) AS/NZS ISO/IEC 19761:2008 Software engineeringCOSMIC-FFPA functional size measurement method AS/NZS ISO/IEC 19770.1:2007 Information technologySoftware asset managementProcesses AS ISO/IEC 20000 Set2007 Information technology Service Set AS ISO/IEC 20000.12007 Information technologyService management Specification AS ISO/IEC 20000.22007 Information technologyService management Code of practice AS/NZS ISO/IEC 20926:2008 Software engineeringIFPUG 4.1 Unadjusted functional size measurement methodCounting practices manual AS/NZS ISO/IEC 20968:2004 Software engineeringMk II Function Point AnalysisCounting Practices Manual AS/NZS ISO/IEC 23026:2006 Software engineeringRecommended Practice for the InternetWeb Site Engineering, Web Site Management, and Web Site Life Cycle AS/NZS ISO/IEC 24570:2007 Software engineeringNESMA functional size measurement method version 2.1Definitions and counting guidelines for the application of Function Point Analysis AS/NZS ISO/IEC 25000:2007 Software engineeringSoftware product Quality Requirements and Evaluation (SQuaRE)Guide to SQuaRE AS/NZS ISO/IEC 25051:2007 Software engineeringSoftware product Quality Requirements and Evaluation (SQuaRE)Requirements for quality of Commercial Off-The-Shelf (COTS) software product and instructions for testing AS/NZS ISO/IEC 25062:2006 Software engineeringSoftware product Quality Requirements and Evaluation (SQuaRE)Common Industry Format (CIF) for usability test reports AS 61508.31999 Functional safety of electrical/electronic/programmable electronic safety-related systemsSoftware requirements AS/NZS ISO/IEC 90003:2007 Software engineeringGuidelines for the application of AS/NZS ISO 9001:2000 to computer software HB 90.92000 Software DevelopmentGuide to ISO 9001:2000Software DevelopmentGuide to ISO 9001:2000 SOIL QUALITY. PEDOLOGY Chemical characteristics of soils AS 47642003 Guidelines for validation procedures for chemical analysis of agricultural and contaminated soil. AS 4969.02008 Analysis of acid sulfate soilDried samples Methods of testIntroduction and definitions, symbols and acronyms AS 4969.12008 Analysis of acid sulfate soilDried samples Methods of testPre-treatment of samples AS 4969.22008 Analysis of acid sulfate soilDried samples Methods of testDetermination of pHKCl and titratable actual acidity (TAA) AS 4969.32008 Analysis of acid sulfate soilDried samples Methods of testDetermination of peroxide pH (pHOX), titratable peroxide acidity (TPA) and excess acid neutralizing capacity (ANCE)
426
SUBJECT INDEX
AS 1289.3.4.12008 Methods of testing soils for engineering purposesSoil classification testsDetermination of the linear shrinkage of a soilStandard method AS 1289.3.5.12006 Methods of testing soils for engineering purposesSoil classification testsDetermination of the soil particle density of a soilStandard method AS 1289.3.5.22002 Methods of testing soils for engineering purposesSoil classification testsDetermination of the soil particle density of combined soil fractionsVacuum pycnometer method AS 1289.3.6.11995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the particle size distribution of a soilStandard method of analysis by sieving AS 1289.3.6.21995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the particle size distribution of a soilAnalysis by sieving in combination with hydrometer analysis (subsidiary method) AS 1289.3.6.32003 Methods of testing soils for engineering purposesSoil classification testsDetermination of the particle size distribution of a soilStandard method of fine analysis using a hydrometer AS 1289.3.7.12002 Methods of testing soils for engineering purposesSoil classification testsDetermination of the sand equivalent of a soil using a power-operated shaker AS 1289.3.8.12006 Methods of testing soils for engineering purposesSoil classification testsDispersionDetermination of Emerson class number of a soil AS 1289.3.8.22008 Methods of testing soils for engineering purposesSoil classification testsDispersionDetermination of the percent dispersion of a soil AS 1289.3.8.31997 Methods of testing soils for engineering purposesSoil classification testsDispersionDetermination of pinhole dispersion classification of a soil AS 1289.3.9.12002 Methods of testing soils for engineering purposesSoil classification testsDetermination of the cone liquid limit of a soil AS 1289.3.9.22006 Methods of testing soils for engineering purposesSoil classification testsDetermination of the cone liquid limit of soilOne-point method AS 1289.4.1.11997 Methods of testing soils for engineering purposesSoil chemical testsDetermination of the organic matter content of a soilNormal method AS 1289.4.2.11997 Methods of testing soils for engineering purposesSoil chemical testsDetermination of the sulfate content of a natural soil and the sulfate content of the groundwater Normal method AS 1289.4.3.11997 Methods of testing soils for engineering purposesSoil chemical testsDetermination of the pH value of a soilElectrometric method AS 1289.4.4.11997 Methods of testing soils for engineering purposesSoil chemical testsDetermination of the electrical resistivity of a soilMethod for sands and granular materials AS 1289.5.1.12003 Methods of testing soils for engineering purposesSoil compaction and density testsDetermination of the dry density/moisture content relation of a soil using standard compactive effort AS 1289.5.2.12003 Methods of testing soils for engineering purposesSoil compaction and density testsDetermination of the dry density/moisture content relation of a soil using modified compactive effort AS 1289.5.3.12004 Methods of testing soils for engineering purposesSoil compaction and density testsDetermination of the field density of a soilSand replacement method using a sandcone pouring apparatus AS 1289.5.3.22004 Methods of testing soils for engineering purposesSoil compaction and density testsDetermination of the field dry density of a soilSand replacement method using a sand pouring can, with or without a volume displacer AS 1289.5.3.51997 Methods of testing soils for engineering purposesSoil compaction and density testsDetermination of the field dry density of a soilWater replacement method AS 1289.5.4.12007 Methods of testing soils for engineering purposesSoil compaction and density testsCompaction control testDry density ratio, moisture variation and moisture ratio AS 1289.5.4.22007 Methods of testing soils for engineering purposesSoil compaction and density testsCompaction control testAssignment of maximum dry density and optimum moisture content values
AS 1289.5.4.32006 Methods of testing soils for engineering purposesSoil compaction and density testsCompaction control testDry density ratio and moisture ratio using statistical selection of reference values AS 1289.5.5.11998 Methods of testing soils for engineering purposesSoil compaction and density testsDetermination of the minimum and maximum dry density of a cohesionless material Standard method AS 1289.5.6.11998 Methods of testing soils for engineering purposesSoil compaction and density testsCompaction control testDensity index method for a cohesionless material AS 1289.5.7.12006 Methods of testing soils for engineering purposesSoil compaction and density testsCompaction control testHilf density ratio and Hilf moisture variation (rapid method) AS 1289.5.8.12007 Methods of testing soils for engineering purposesSoil compaction and density testsDetermination of field density and field moisture content of a soil using a nuclear surface moistureDensity gaugeDirect transmission mode AS 1289.5.8.41998 Methods of testing soils for engineering purposesSoil compaction and density testsNuclear surface moisture-density gaugesCalibration using standard blocks AS 1289.5.8.51998 Methods of testing soils for engineering purposesSoils compaction and density testsNuclear surface moisture-density gaugesDensity of a Type A or Type C standard density block AS 1289.5.8.61998 Methods of testing soils for engineering purposesSoil compaction and density testsNuclear surface moisture-density gaugesAssigned density of a Type B standard density block AS 1289.5.8.71998 Methods of testing soils for engineering purposesSoil compaction and density testsNuclear surface moisture-density gaugesWater content of a standard moisture block using hydrogen content of components AS 1289.5.8.81998 Methods of testing soils for engineering purposesSoil compaction and density testsNuclear surface moisture-density gaugesWater content of a standard moisture block using proportion of water AS 1289.5.8.91998 Methods of testing soils for engineering purposesSoil compaction and density testsNuclear surface moisture-density gaugesWater content of a standard moisture block using comparison against primary blocks AS 1289.6.1.11998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the California Bearing Ratio of a soilStandard laboratory method for a remoulded specimen AS 1289.6.1.21998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the California Bearing Ratio of a soilStandard laboratory method for an undisturbed specimen AS 1289.6.1.31998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the California Bearing Ratio of a soilStandard field-in-place method AS 1289.6.2.12001 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the shear strength of a soilField test using a vane AS 1289.6.2.21998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of shear strength of a soilDirect shear test using a shear box AS 1289.6.3.12004 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the penetration resistance of a soilStandard penetration test (SPT) AS 1289.6.3.21997 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the penetration resistance of a soil9kg dynamic cone penetrometer test AS 1289.6.3.31997 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the penetration resistance of a soilPerth sand penetrometer test AS 1289.6.4.11998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of compressive strength of a soilCompressive strength of a specimen tested in undrained triaxial compression without measurement of pore water pressure AS 1289.6.4.21998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of compressive strength of a soilCompressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore water pressure
427
SUBJECT INDEX
AS 1289.5.7.12006 Methods of testing soils for engineering purposesSoil compaction and density testsCompaction control testHilf density ratio and Hilf moisture variation (rapid method) Other standards related to soil quality AS 37432003 Potting mixes AS 44192003 Soils for landscaping and garden use AS 44542003 Composts, soil conditioners and mulches AS/NZS 5024(Int):2005 Potting mixes, composts and other matricesExamination for legionellae Physical properties of soils AS 1289.3.2.11995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the plastic limit of a soilStandard method AS 1289.3.3.11995 Methods of testing soils for engineering purposesSoil classification testsCalculation of the plasticity index of a soil AS 1289.3.3.21995 Methods of testing soils for engineering purposesSoil classification testsCalculation of the cone plasticity index of a soil AS 1289.3.5.12006 Methods of testing soils for engineering purposesSoil classification testsDetermination of the soil particle density of a soilStandard method AS 1289.5.3.51997 Methods of testing soils for engineering purposesSoil compaction and density testsDetermination of the field dry density of a soilWater replacement method Soil quality and pedology in general AS 1289.02000 Methods of testing soils for engineering purposes General requirements and list of methods AS 1289.1.2.11998 Methods of testing soils for engineering purposesSampling and preparation of soilsDisturbed samples Standard method AS 1289.1.3.11999 Methods of testing soils for engineering purposesSampling and preparation of soilsUndisturbed samplesStandard method AS 1289.1.4.11998 Methods of testing soils for engineering purposesSampling and preparation of soilsSelection of sampling or test sitesRandom number method AS 1289.1.4.21998 Methods of testing soils for engineering purposesSampling and preparation of soilsSelection of sampling or test sitesStratified random number method AS 1289.2.1.12005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilOven drying method (standard method) AS 1289.2.1.22005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilSand bath method (subsidiary method) AS 1289.2.1.42005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilMicrowave-oven drying method (subsidiary method) AS 1289.2.1.52005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilInfrared lights method (subsidiary method) AS 1289.2.1.62005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilHotplate drying method AS 1289.2.2.11998 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the total suction of a soilStandard method AS 1289.2.3.11998 Methods of testing soils for engineering purposesSoil moisture content testsEstablishment of correlation Subsidiary method and the standard method AS 1289.3.1.11995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the liquid limit of a soilFour point Casagrande method AS 1289.3.1.21995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the liquid limit of a soilOne point Casagrande method (subsidiary method) AS 1289.3.2.11995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the plastic limit of a soilStandard method AS 1289.3.3.11995 Methods of testing soils for engineering purposesSoil classification testsCalculation of the plasticity index of a soil AS 1289.3.3.21995 Methods of testing soils for engineering purposesSoil classification testsCalculation of the cone plasticity index of a soil
AS 1289.6.5.11999 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the static cone penetration resistance of a soilField test using a mechanical and electrical cone or friction-cone penetrometer AS 1289.6.6.11998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the one-dimensional consolidation properties of a soilStandard method AS 1289.6.7.12001 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of permeability of a soilConstant head method for a remoulded specimen AS 1289.6.7.22001 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of permeability of a soilFalling head method for a remoulded specimen AS 1289.6.7.31999 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of permeability of a soilConstant head method using a flexible wall permeameter AS 1289.6.8.11995 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the resilient modulus and permanent deformation of granular unbound pavement materials AS 1289.6.9.12000 Methods of testing soils for engineering purposesSoil strength and consolidation testDetermination of stiffness of soilClegg impact value (CIV) AS 1289.7.1.12003 Methods of testing soils for engineering purposesSoil reactivity testsDetermination of the shrinkage index of a soilShrink-swell index AS 1289.7.1.21998 Methods of testing soils for engineering purposesSoil reactivity testsDetermination of the shrinkage index of a soilLoaded shrinkage index AS 1289.7.1.31998 Methods of testing soil for engineering purposesSoil reactivity testsDetermination of the shrinkage index of a soilCore shrinkage index AS 4479.11997 Analysis of soilsPretreatment of potentially contaminated soil samples for heavy metal and metalloid analysis AS 4479.21997 Analysis of soilsExtraction of heavy metals and metalloids from soil by aqua regiaHotplate digestion method AS 4479.31999 Analysis of soilsDetermination of metals in aqua regia extracts of soil by flame atomic absorption spectrometry AS 4479.41999 Analysis of soilsDetermination of metals in aqua regia extracts of soil by inductively coupled plasma-atomic emission spectrometry AS 4482.12005 Guide to the investigation and sampling of sites with potentially contaminated soilNon-volatile and semi-volatile compounds AS 4482.21999 Guide to the sampling and investigation of potentially contaminated soilVolatile substances AS 48742000 Guide to the investigation of potentially contaminated soil and deposited dust as a source of lead available to humans HB 1602006 Soils testing Hydrological properties of soils AS 1289.2.1.12005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilOven drying method (standard method) AS 1289.2.1.22005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilSand bath method (subsidiary method) AS 1289.2.1.42005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilMicrowave-oven drying method (subsidiary method) AS 1289.2.1.52005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilInfrared lights method (subsidiary method) AS 1289.2.1.62005 Methods of testing soils for engineering purposesSoil moisture content testsDetermination of the moisture content of a soilHotplate drying method AS 1289.2.3.11998 Methods of testing soils for engineering purposesSoil moisture content testsEstablishment of correlation Subsidiary method and the standard method AS 1289.3.1.11995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the liquid limit of a soilFour point Casagrande method AS 1289.3.1.21995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the liquid limit of a soilOne point Casagrande method (subsidiary method)
428
SUBJECT INDEX
AS 1289.3.4.12008 Methods of testing soils for engineering purposesSoil classification testsDetermination of the linear shrinkage of a soilStandard method AS 1289.3.5.12006 Methods of testing soils for engineering purposesSoil classification testsDetermination of the soil particle density of a soilStandard method AS 1289.3.6.11995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the particle size distribution of a soilStandard method of analysis by sieving AS 1289.3.6.21995 Methods of testing soils for engineering purposesSoil classification testsDetermination of the particle size distribution of a soilAnalysis by sieving in combination with hydrometer analysis (subsidiary method) AS 1289.3.8.12006 Methods of testing soils for engineering purposesSoil classification testsDispersionDetermination of Emerson class number of a soil AS 1289.3.8.22008 Methods of testing soils for engineering purposesSoil classification testsDispersionDetermination of the percent dispersion of a soil AS 1289.3.8.31997 Methods of testing soils for engineering purposesSoil classification testsDispersionDetermination of pinhole dispersion classification of a soil AS 1289.4.1.11997 Methods of testing soils for engineering purposesSoil chemical testsDetermination of the organic matter content of a soilNormal method AS 1289.4.2.11997 Methods of testing soils for engineering purposesSoil chemical testsDetermination of the sulfate content of a natural soil and the sulfate content of the groundwater Normal method AS 1289.4.3.11997 Methods of testing soils for engineering purposesSoil chemical testsDetermination of the pH value of a soilElectrometric method AS 1289.4.4.11997 Methods of testing soils for engineering purposesSoil chemical testsDetermination of the electrical resistivity of a soilMethod for sands and granular materials AS 1289.5.3.51997 Methods of testing soils for engineering purposesSoil compaction and density testsDetermination of the field dry density of a soilWater replacement method AS 1289.5.4.12007 Methods of testing soils for engineering purposesSoil compaction and density testsCompaction control testDry density ratio, moisture variation and moisture ratio AS 1289.5.4.22007 Methods of testing soils for engineering purposesSoil compaction and density testsCompaction control testAssignment of maximum dry density and optimum moisture content values AS 1289.5.5.11998 Methods of testing soils for engineering purposesSoil compaction and density testsDetermination of the minimum and maximum dry density of a cohesionless material Standard method AS 1289.5.6.11998 Methods of testing soils for engineering purposesSoil compaction and density testsCompaction control testDensity index method for a cohesionless material AS 1289.5.7.12006 Methods of testing soils for engineering purposesSoil compaction and density testsCompaction control testHilf density ratio and Hilf moisture variation (rapid method) AS 1289.5.8.12007 Methods of testing soils for engineering purposesSoil compaction and density testsDetermination of field density and field moisture content of a soil using a nuclear surface moistureDensity gaugeDirect transmission mode AS 1289.5.8.41998 Methods of testing soils for engineering purposesSoil compaction and density testsNuclear surface moisture-density gaugesCalibration using standard blocks AS 1289.5.8.51998 Methods of testing soils for engineering purposesSoils compaction and density testsNuclear surface moisture-density gaugesDensity of a Type A or Type C standard density block AS 1289.5.8.61998 Methods of testing soils for engineering purposesSoil compaction and density testsNuclear surface moisture-density gaugesAssigned density of a Type B standard density block AS 1289.5.8.71998 Methods of testing soils for engineering purposesSoil compaction and density testsNuclear surface moisture-density gaugesWater content of a standard moisture block using hydrogen content of components AS 1289.5.8.81998 Methods of testing soils for engineering purposesSoil compaction and density testsNuclear surface moisture-density gaugesWater content of a standard moisture block using proportion of water
AS 1289.5.8.91998 Methods of testing soils for engineering purposesSoil compaction and density testsNuclear surface moisture-density gaugesWater content of a standard moisture block using comparison against primary blocks AS 1289.6.1.11998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the California Bearing Ratio of a soilStandard laboratory method for a remoulded specimen AS 1289.6.1.21998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the California Bearing Ratio of a soilStandard laboratory method for an undisturbed specimen AS 1289.6.1.31998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the California Bearing Ratio of a soilStandard field-in-place method AS 1289.6.2.21998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of shear strength of a soilDirect shear test using a shear box AS 1289.6.3.21997 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the penetration resistance of a soil9kg dynamic cone penetrometer test AS 1289.6.3.31997 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the penetration resistance of a soilPerth sand penetrometer test AS 1289.6.4.11998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of compressive strength of a soilCompressive strength of a specimen tested in undrained triaxial compression without measurement of pore water pressure AS 1289.6.4.21998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of compressive strength of a soilCompressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore water pressure AS 1289.6.5.11999 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the static cone penetration resistance of a soilField test using a mechanical and electrical cone or friction-cone penetrometer AS 1289.6.6.11998 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the one-dimensional consolidation properties of a soilStandard method AS 1289.6.7.22001 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of permeability of a soilFalling head method for a remoulded specimen AS 1289.6.7.31999 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of permeability of a soilConstant head method using a flexible wall permeameter AS 1289.6.8.11995 Methods of testing soils for engineering purposesSoil strength and consolidation testsDetermination of the resilient modulus and permanent deformation of granular unbound pavement materials AS 1289.6.9.12000 Methods of testing soils for engineering purposesSoil strength and consolidation testDetermination of stiffness of soilClegg impact value (CIV) AS 1289.7.1.21998 Methods of testing soils for engineering purposesSoil reactivity testsDetermination of the shrinkage index of a soilLoaded shrinkage index AS 1289.7.1.31998 Methods of testing soil for engineering purposesSoil reactivity testsDetermination of the shrinkage index of a soilCore shrinkage index AS 4439.11999 Wastes, sediments and contaminated soils Preparation of leachatesPreliminary assessment AS 4439.21997 Wastes, sediments and contaminated soils Preparation of leachatesZero headspace procedure AS 4439.31997 Wastes, sediments amd contaminated soils Preparation of leachatesBottle leaching procedures AS 4479.11997 Analysis of soilsPretreatment of potentially contaminated soil samples for heavy metal and metalloid analysis AS 4479.21997 Analysis of soilsExtraction of heavy metals and metalloids from soil by aqua regiaHotplate digestion method AS 4479.31999 Analysis of soilsDetermination of metals in aqua regia extracts of soil by flame atomic absorption spectrometry
429
SUBJECT INDEX
AS/NZS 2299.2:2002 Occupational diving operationsScientific diving AS/NZS 2299.3:2003 Occupational diving operationsRecreational industry diving and snorkelling operations AS/NZS 2299.4:2005 Occupational diving operationsFilm and photographic diving AS 2815.12008 Training and certification of occupational divers Occupational SCUBA diverStandard AS 2815.52006 Training and certification of occupational divers Dive supervisor AS 4005 (Set) Recreational Diving Set AS 4005.1 (Set) Recreational Diving Supplementary Set AS 4005.12000 Training and certification of recreational divers Minimum entry-level SCUBA diving AS 4005.1 Supplement 12000 Training and certification of recreational diversMinimum entry-level SCUBA divingMedical form for prospective recreational SCUBA divers AS 4005.1 Supplement 22000 Training and certification of recreational diversMinimum entry-level SCUBA divingStatement of health for recreational diving AS 4005.22000 Training and certification of recreational divers Recreational SCUBA dive supervisor AS 4005.32000 Training and certification of recreational divers Assistant SCUBA instructor AS 4005.42000 Training and certification of recreational divers SCUBA instructor AS 4005.52000 Training and certification of recreational divers SCUBA instructor trainer AS 40471992 Saddle trees AS/NZS 4499.1:1997 Protective headgear for cricketHelmets AS/NZS 4499.2:1997 Protective headgear for cricketTemple protectors AS/NZS 4499.3:1997 Protective headgear for cricketFaceguards AS 4758.12008 Personal flotation devicesGeneral requirements AS 4758.22008 Personal flotation devicesMaterials and componentsRequirements and test methods AS/NZS 5848:2000 Code of practice for bungy jumping HB 2092003 Guidelines for the fabrication, use and maintenance of sports mouthguards Sports equipment and facilities in general AS 4866.12007 Playing field equipmentSoccer goalsSafety aspects HB 2272003 Portable soccer goalpostsManufacture, use and storage Sports facilities AS/NZS 1838:1994 Swimming poolsPremoulded fibre-reinforced plasticsDesign and fabrication AS/NZS 1839:1994 Swimming poolsPremoulded fibre-reinforced plasticsInstallation AS 1926 Set2007 Swimming pool safety Standards Set AS 1926.12007 Swimming pool safetySafety barriers for swimming pools AS 1926.11993 Swimming pool safetyFencing for swimming pools AS 1926.22007 Swimming pool safetyLocation of safety barriers for swimming pools AS 1926.21995 Swimming pool safetyLocation of fencing for private swimming pools AS 1926.32003 Swimming pool safetyWater recirculation systems AS 1926.31993 Swimming pool safetyWater recirculation and filtration systems AS 24162002 Design and application of water safety signs AS 2560.12002 Sports lightingGeneral principles AS 2560.2.12003 Sports lightingSpecific applicationsLighting for outdoor tennis AS 2560.2.21986 Guide to sports lightingSpecific recommendationsLighting of multipurpose indoor sports centres AS 2560.2.32007 Sports lightingSpecific applicationsLighting for football (all codes) AS 2560.2.41986 Guide to sports lightingSpecific recommendationsLighting for outdoor netball and basketball AS 2560.2.52007 Sports lightingSpecific applicationsSwimming pools AS 2560.2.61994 Guide to sports lighting- Specific recommendationsBaseball and softball
AS 4479.41999 Analysis of soilsDetermination of metals in aqua regia extracts of soil by inductively coupled plasma-atomic emission spectrometry AS 4482.12005 Guide to the investigation and sampling of sites with potentially contaminated soilNon-volatile and semi-volatile compounds AS 4482.21999 Guide to the sampling and investigation of potentially contaminated soilVolatile substances AS 48742000 Guide to the investigation of potentially contaminated soil and deposited dust as a source of lead available to humans SOLAR ENERGY ENGINEERING AS 2369.11990 Materials for solar collectors for swimming pool heating Rubber materials AS 2369.21993 Materials for solar collectors for swimming pool heating Flexible or plasticized polyvinyl chloride AS/NZS 2535.1:2007 Test methods for solar collectorsThermal performance of glazed liquid heating collectors including pressure drop (ISO 9806-1:1994, MOD) AS/NZS 2712:2007 Solar and heat pump water heatersDesign and construction AS 36341989 Solar heating systems for swimming pools AS/NZS 4234:2008 Heated water systemsCalculation of energy consumption AS 42341994 Solar water heatersDomestic and heat pumpCalculation of energy consumption AS/NZS 4445.1:1997 Solar heatingDomestic water heating systems Performance rating procedure using indoor test methods SPACE SYSTEMS AND OPERATIONS AS/NZS 4270.1:1995 Geographic information systemsSpatial data transfer standardLogical specifications AS/NZS 4270.2:1995 Geographic information systemsSpatial data transfer standardSpatial features AS/NZS 4270.3:1995 Geographic information systemsSpatial data transfer standardISO 8211 encoding AS/NZS 4270.4:1998 Geographic information systemsSpatial data transfer standardTopological vector profile SPECIAL MEASURING EQUIPMENT FOR USE IN TELECOMMUNICATIONS AS/NZS 62087.2.1:2008 Power consumption of audio, video and related equipmentMinimum energy performance standards (MEPS) requirements for digital television set-top boxes SPECIAL PURPOSE VEHICLES AS 1418.82008 Cranes, hoists and winchesSpecial purpose appliances AS 3954.11991 Motor vehicle controlsAdaptive systems for people with disabilitiesGeneral requirements AS 3954.21991 Motor vehicle controlsAdaptive systems for people with disabilitiesHand controlsProduct requirements AS/NZS 4535:1999 Ambulance restraint systems AS 50622006 Fire protection for mobile and transportable equipment SPICES AND CONDIMENTS. FOOD ADDITIVES Food additives. AS 20931977 Salt for use in the manufacture of dairy products AS 2093P1977 Salt for use in the manufacture of dairy products Reference print SPOOLS. BOBBINS AS/NZS 2857:1996 Timber drums for insulated electric cables and bare conductors SPORTS EQUIPMENT AND FACILITIES Indoor sports equipment AS/NZS 4066:1992 Eye protectors for racquet sports AS 40921993 Exercise cyclesSafety requirements AS 49892006 TrampolinesSafety aspects Other sports equipment and facilities AS 49892006 TrampolinesSafety aspects Outdoor and water sports equipment AS 22272006 Yachting harnesses and linesConventional lines AS 22611990 Rescue buoys AS/NZS 2299.1:2007 Occupational diving operationsStandard operational practice AS/NZS 2299.1 Supplement 1:2007 Occupational diving operationsStandard operational practice Supplement 1: AS/NZS 2299 diving medical examination forms (Supplement to AS/NZS 2299.1:2007)
430
SUBJECT INDEX
AS 2560.2.71994 Guide to sports lighting- Specific recommendationsOutdoor hockey AS 2560.2.82007 Sports lightingSpecific applicationsOutdoor bowling greens AS 2610 Set2007 Spa safety Standards Set AS 2610.12007 Spa poolsPublic spas AS 2610.22007 Spa poolsPrivate spas AS 27831992 Use of reinforced concrete for small swimming pools AS 28181993 Guide to swimming pool safety AS 28201993 Gate units for private swimming pools AS 2983.21988 Methods of test for synthetic sporting surfaces Determination of rolling resistanceDetermination of the withdrawal force of tufts or loops AS/NZS 3136:2001 Approval and test specificationElectrical equipment for spa and swimming pools AS 3541.11988 Synthetic sporting surfacesGeneral principles AS 36331989 Private swimming poolsWater quality AS 36341989 Solar heating systems for swimming pools AS 39792006 Hydrotherapy pools AS 45602004 Gas pool heaters AS 4693.12004 Surfaces for sports areasMethods of test Determination of resistance to impact AS 4693.22004 Surfaces for sports areasMethods of test Determination of thickness of synthetic sports surfaces AS 4693.32004 Surfaces for sports areasMethods of test Determination of joint strength of synthetic surfaces AS 4693.42004 Surfaces for sports areasMethods of test Determination of tensile properties of synthetic sports surfaces AS 4693.52004 Surfaces for sports areasMethods of test Determination of water infiltration rate AS 4693.62004 Surfaces for sports areasMethods of test Determination of resistance to staining AS 4693.72004 Surfaces for sports areasMethods of test Determination of the behaviour under a rolling load AS 4693.82004 Surfaces for sports areasMethods of test Procedure for the preparation of synthetic turf and textile test pieces AS 4693.92004 Surfaces for sports areasMethods of test Determination of ball roll behaviour AS 4758.32008 Personal flotation devicesTest methods AS/NZS 60335.2.60:2006 Household and similar electrical appliancesSafetyParticular requirements for whirlpool baths and whirlpool spas(IEC 60335-2-60 Ed 3.1, MOD) HB 49.11993 Sporting Facilities ManualSports lighting HB 49.21993 Sporting Facilities ManualSporting surfaces SPRINGS AS 14722003 Carbon steel spring wire for mechanical springs STABILIZED POWER SUPPLY see RECTIFIERS. CONVERTERS. STABILIZED POWER SUPPLY STANDARDIZATION. GENERAL RULES HB 1071998 Understanding Standards HB 1622002 Rules for the structure and drafting of Australian Standards MP 15.21990 Standards Australia Style ManualDrafting of Australian Standards MP 15.61990 Standards Australia Style ManualDrafting and Interpretation of Standards from a legal perspective STERILIZATION AND DISINFECTION AS ISO 105352002 Hoists for the transfer of disabled persons Requirements and test methods Sterilization and disinfection in general AS EN 556.12002 Sterilization of medical devicesRequirements for medical devices to be designated "STERILE"Requirements for terminally sterilized medical devices AS EN 1174.12002 Sterilization of medical devicesEstimation of the population of micro-organisms on productRequirements AS EN 1174.22002 Sterilization of medical devicesEstimation of the population of micro-organisms on productGuidance AS EN 1174.32002 Sterilization of medical devicesEstimation of the population of micro-organisms on productGuide to the methods for validation of microbiological techniques AS/NZS 4187:2003 Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities AS/NZS 4815 Set:2008 Sterilising Medical instruments Set
SPRINGS
AS/NZS 4815:2006 Office-based health care facilities Reprocessing of reusable medical and surgical instruments and equipment, and maintenance of the associated environment AS ISO 111342003 Sterilization of health care products Requirements for validation and routine controlIndustrial moist heat sterilization AS ISO 111352002 Medical devicesValidation and routine control of ethylene oxide sterilization AS/NZS ISO 11137.1:2006 Sterilization of health care products RadiationRequirements for development, validation and routine control of a sterilization process for medical devices AS/NZS ISO 11137.2:2006 Sterilization of health care products RadiationEstablishing the sterilization dose AS/NZS ISO 11137.3:2006 Sterilization of health care products RadiationGuidance on dosimetric aspects CD HEALTH2006 31 Healthcare Standards on CD MP 791999 Guide to application of AS 41871998Sterilization process MP 801999 Guide to application of AS 41871998Preparation, inspection and packaging for sterilization MP 811999 Guide to application of AS 41871998Storage and handling of processed items MP 821999 Guide to application of AS 41871998Cleaning processFlowchart MP 831999 Guide to application of AS 41871998Disinfection MP 852000 Guide to application of AS 41871998, Heat-sensitive endoscope reprocessing Sterilized packaging AS 1079.11993 Packaging of items (sterile) for patient care Selection of packaging materials for goods undergoing sterilization AS 1079.21994 Packaging of items (sterile) for patient careNonreusable papersFor the wrapping of goods undergoing sterilization in health care facilities AS 1079.31994 Packaging of items (sterile) for patient carePaper bagsFor single use in health care facilities AS 1079.52003 Packaging of items (sterile) for patient care Single-use, non-woven wrapping materialsFor goods undergoing sterilization in health care facilities AS ISO 141602002 Sterilization of single-use medical devices incorporating materials of animal originValidation and routine control of sterilization by liquid sterilants AS EN 501032002 Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry. Sterilizing equipment AS 14102003 SterilizersSteamPre-vacuum AS 21821998 SterilizersSteamBenchtop AS 21922002 SterilizersSteamDownward-displacement AS 24371987 Flusher/sanitizers for bed pans and urine bottles AS 24872002 Dry heat sterilizers AS 25141999 Drying cabinets for medical equipment AS 2773.11998 Ultrasonic cleaners for health care facilitiesNonportable AS 2773.21999 Ultrasonic cleaners for health care facilities Benchtop AS 27741985 Drying cabinets for respiratory apparatus AS 2945(Int)2002 Batch-type washer/disinfectors for health care facilities AS 38361998 Rack conveyor washers for health care facilities STORAGE EQUIPMENT AS 1418.62004 Cranes, hoists and winchesGuided storing and retrieving appliances AS 21431978 Industrial and commercial steel shelving AS 22731979 Steel library shelving AS 2359.81995 Powered industrial trucksPallet stackers and high-lift platform trucksStability tests AS 2359.92006 Powered industrial trucksOverhead guardsSpecification and testing (ISO 6055:2004, MOD) AS 2550.61995 CranesSafe useGuided storing and retrieving appliances AS 40841993 Steel storage racking AS 4084 Supplement 11993 Steel storage rackingCommentary (Supplement to AS 40841993) STORING. WAREHOUSING AS 40841993 Steel storage racking
431
STRUCTURES OF BUILDINGS
SUBJECT INDEX
AS 4100 Supplement 11999 Steel structuresCommentary (Supplement to AS 41001998) AS/NZS 4600:2005 Cold-formed steel structures AS/NZS 4600:1996 Cold-formed steel structures AS/NZS 4600 Supplement 1:1998 Cold-formed steel structures Commentary (Supplement to AS/NZS 4600:1996) AS/NZS 4673:2001 Cold-formed stainless steel structures AS/NZS 4676:2000 Structural design requirements for utility services poles AS/NZS 4677:2000 Steel utility services poles CD DOMESTIC2007 Domestic Building Standards CD CD STRUCTURAL2007 Structural Engineering Standards on CD HB 481999 Steel structures design handbook WTIA TN 111998 Commentary on structural steel welding Standard AS/NZS 1554 Other structures CD STRUCTURAL2007 Structural Engineering Standards on CD CSIRO 5 Earth-wall construction Structures of buildings in general AS/NZS 1170 Set:2007 Structural design actions Set AS/NZS 1170.0:2002 Structural design actionsGeneral principles AS/NZS 1170.0 Supplement 1:2002 Structural design actions General principles -Commentary (Supplement to AS/NZS 1170.0:2002) AS/NZS 1170.1:2002 Structural design actionsPermanent, imposed and other actions AS 1170.11989 Minimum design loads on structures (known as the SAA Loading Code)Dead and live loads and load combinations AS/NZS 1170.1 Supplement 1:2002 Structural design actions Permanent, imposed and other actionsCommentary (Supplement to AS/NZS 1170.1:2002) AS/NZS 1170.2:2002 Structural design actionsWind actions AS 1170.21989 Minimum design loads on structures (known as the SAA Loading Code)Wind loads AS/NZS 1170.2 Supplement 1:2002 Structural design actionsWind actionsCommentary (Supplement to AS/NZS 1170.2:2002) AS/NZS 1170.3:2003 Structural design actionsSnow and ice actions AS 1170.31990 Minimum design loads on structures (known as the SAA Loading Code)Snow loads AS/NZS 1170.3 Supplement 1:2003 Structural design actions Snow and ice actionsCommentary (Supplement to AS/NZS 1170.3:2003) AS 1170.3 Supplement 11990 Minimum design loads on structures (known as the SAA Loading Code)Snow loads Commentary (Supplement to AS 1170.31990) AS 1170.42007 Structural design actionsEarthquake actions in Australia AS 1170.41993 Minimum design loads on structures (known as the SAA Loading Code)Earthquake loads AS 1170.4 Supplement 11993 Minimum design loads on structures (known as the SAA Loading Code)Earthquake loads Commentary (Supplement to AS 1170.41993) AS 2327.12003 Composite structuresSimply supported beams AS 2327.11996 Composite structuresSimply supported beams AS 26012001 Demolition of structures AS 38261998 Strengthening existing buildings for earthquake AS 40552006 Wind loads for housing AS 40551992 Wind loads for housing AS 42262008 Guidelines for safe housing design AS 51042005 General principles on reliability for structures AS 51052005 Basis for design of structuresNotationsGeneral symbols AS ISO 89302005 General principles on reliability of structures List of equivalent terms AS ISO 124942005 Atmospheric icing of structures AS ISO 138222005 Basis for design of structuresAssessment of existing structures (ISO13822:2001, MOD) CD DOMESTIC2007 Domestic Building Standards CD CD STRUCTURAL2007 Structural Engineering Standards on CD STRUCTURES SET2005 International Structural Standards Set HB 2.11998 Australian Standards for civil engineering students Materials and testing
AS 4084 Supplement 11993 Steel storage rackingCommentary (Supplement to AS 40841993) STRUCTURES OF BUILDINGS AS/NZS 4065:2000 Concrete utility services poles CD DOMESTIC2007 Domestic Building Standards CD CD STRUCTURAL2007 Structural Engineering Standards on CD Concrete structures AS 27831992 Use of reinforced concrete for small swimming pools AS 36002001 Concrete structures AS 36001994 Concrete structures AS 3600 Supplement 11994 Concrete structuresCommentary (Supplement to AS 36001994) AS 37352001 Concrete structures retaining liquids AS 3735 Supplement 12001 Concrete structures retaining liquids Commentary (Supplement to AS 37352001) CD DOMESTIC2007 Domestic Building Standards CD CD STRUCTURAL2007 Structural Engineering Standards on CD HB 842006 Guide to Concrete Repair and Protection Masonry AS/NZS 2699.1:2000 Built-in components for masonry constructionWall ties AS/NZS 2699.2:2000 Built-in components for masonry construction,Connectors and accessories AS/NZS 2699.3:2002 Built-in components for masonry constructionLintels and shelf angles (durability requirements) AS 3700 Set2007 Masonry structures Set AS 37002001 Masonry structures AS 3700 Supplement 12004 Masonry structuresCommentary (Supplement to AS37002001) AS 42041994 Headstones and cemetery monuments CD DOMESTIC2007 Domestic Building Standards CD CD STRUCTURAL2007 Structural Engineering Standards on CD HB 1242007 Design and Construction of Concrete Masonry Buildings (CD-ROM) HB 1552002 Guide to the use of recycled concrete and masonry materials Metal structures AS/NZS 1554 Set:2008 Structural steel welding Set AS/NZS 1554.1:2004 Structural steel weldingWelding of steel structures AS/NZS 1554.2:2003 Structural steel weldingStud welding (steel studs to steel) AS/NZS 1554.3:2008 Structural steel weldingWelding of reinforcing steel AS/NZS 1554.4:2004 Structural steel weldingWelding of high strength quenched and tempered steels AS/NZS 1554.5:2004 Structural steel weldingWelding of steel structures subject to high levels of fatigue loading AS/NZS 1554.6:1994 Structural steel weldingWelding stainless steels for structural purposes AS/NZS 1554.7:2006 Structural steel weldingWelding of sheet steel structures AS/NZS 1664.1:1997 Aluminium structuresLimit state design AS/NZS 1664.1 Supplement 1:1997 Aluminium structuresLimit state designCommentary (Supplement to AS/NZS 1664.1:1997) AS/NZS 1664.2:1997 Aluminium structuresAllowable stress design AS/NZS 1664.2 Supplement 1:1997 Aluminium structures Allowable stress designCommentary (Supplement to AS/NZS 1664.2:1997) AS/NZS 1665:2004 Welding of aluminium structures AS 22142004 Certification of welding supervisorsStructural steel welding AS 36231993 Domestic metal framing AS 3703.11989 Long-span corrugated steel structuresMaterials and manufacture AS 3703.21989 Long-span corrugated steel structuresDesign and installation AS 38281998 Guidelines for the erection of building steelwork AS 39951994 Design of steel lattice towers and masts AS/NZS 4065:2000 Concrete utility services poles AS 41001998 Steel structures
432
SUBJECT INDEX
HB 2.22003 Australian Standards for civil engineering students Structural engineering HB 1061998 Guidelines for design of structures in snow areas HB 132.1 (Set) Structural upgrading of older housesNon-cyclone areas HB 132.11999 Structural upgrading of older housesNon-cyclone areas HB 132.1 Supplement 11999 Structural upgrading of older housesNon-cyclone areasConnections (Supplement to SAA HB132.11999) HB 132.2 (Set) Structural upgrading of older housesCyclone areas HB 132.21999 Structural upgrading of older housesCyclone areas HB 132.2 Supplement 11999 Structural upgrading of older housesCyclone areasConnections (Supplement to HB 132.21999) HB 2122002 Design Wind Speeds for the Asia-Pacific Region HB 8672007 Supplementary information for design of farm structures Timber structures AS/NZS 1328.1:1998 Glued laminated structural timber Performance requirements and minimum production requirements AS/NZS 1328.2:1998 Glued laminated structural timberGuidelines for AS/NZS 1328: Part 1 for the selection, production and installation of glued laminated structural timber AS 1684.11999 Residential timber-framed constructionDesign criteria AS 1684.22006 Residential timber-framed constructionNoncyclonic areas AS 1684.2 Supplement 02006 Residential timber-framed constructionNon-cyclonic areasGeneral introduction and index (Supplement to AS 1684.22006) AS 1684.2 N1/N2 Supplement 12006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 1: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade F5 (Supplement to AS 1684.22006) AS 1684.2 N1/N2 Supplement 22006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 2: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade F7 (Supplement to AS 1684.22006) AS 1684.2 N1/N2 Supplement 32006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 3: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade F8 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 42006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 4: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade MGP10 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 52006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 5: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade MGP12 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 62006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 6: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade MGP15 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 72006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 7: Timber framing span tablesWind classification N1/N2WA seasoned hardwoodStress Grade F14 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 82006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 8: Timber framing span tablesWind classification N1/N2Seasoned hardwoodStress Grade F17 (Supplement to AS 1684.22006) AS 1684.2 N1/N2 Supplement 92006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 9: Timber framing span tablesWind classification N1/N2Seasoned hardwoodStress Grade F27 (Supplement to AS 1684.22006) AS 1684.2 N1/N2 Supplement 102006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 10: Timber framing span tablesWind classification N1/N2 Unseasoned softwoodStress Grade F5 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 112006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 11: Timber framing span tablesWind classification N1/N2 Unseasoned softwoodStress Grade F7 (Supplement to AS1684.22006)
STRUCTURES OF BUILDINGS
AS 1684.2 N1/N2 Supplement 122006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 12: Timber framing span tablesWind classification N1/N2 Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 132006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 13: Timber framing span tablesWind classification N1/N2 Unseasoned hardwoodStress Grade F11 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 142006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 14: Timber framing span tablesWind classification N1/N2 Unseasoned hardwoodStress Grade F14 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 152006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 15: Timber framing span tablesWind classification N1/N2 Unseasoned hardwoodStress Grade F17 (Supplement to AS1684.22006) AS 1684.2 N3 Supplement 12006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 1: Timber framing span tablesWind classification N3Seasoned softwood Stress Grade F5 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 22006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 2: Timber framing span tablesWind classification N3Seasoned softwood Stress Grade F7 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 32006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 3: Timber framing span tablesWind classification N3Seasoned softwood Stress Grade F8 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 42006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 4: Timber framing span tablesWind classification N3Seasoned softwood Stress Grade MGP10 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 52006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 5: Timber framing span tablesWind classification N3Seasoned softwood Stress Grade MGP12 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 62006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 6: Timber framing span tablesWind classification N3Seasoned softwood Stress Grade MGP 15 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 72006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 7: Timber framing span tablesWind classification N3WA seasoned hardwoodStress Grade F14 (Supplement to AS1684.22006) AS 1684.2 N3 Supplement 82006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 8: Timber framing span tablesWind classification N3Seasoned hardwood Stress Grade F17(Supplement to AS1684.22006) AS 1684.2 N3 Supplement 92006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 9: Timber framing span tablesWind classification N3Seasoned hardwood Stress Grade F27(Supplement to AS1684.22006) AS 1684.2 N3 Supplement 102006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 10: Timber framing span tablesWind classification N3Unseasoned softwoodStress Grade F5 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 112006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 11: Timber framing span tablesWind classification N3Unseasoned softwoodStress Grade F7 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 122006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 12: Timber framing span tablesWind classification N3Unseasoned hardwoodStress Grade F8 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 132006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 13: Timber framing span tablesWind classification N3Unseasoned hardwoodStress Grade F11 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 142006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 14: Timber framing span tablesWind classification N3Unseasoned hardwoodStress Grade F14 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 152006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 15: Timber framing span tablesWind classification N3Unseasoned hardwoodStress Grade F17 (Supplement to AS 1684.22006)
433
STRUCTURES OF BUILDINGS
SUBJECT INDEX
AS 1684.3 C1 Supplement 52006 Residential timber-framed constructionCyclonic areasC1 Supplement 5: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade MGP12 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 62006 Residential timber-framed constructionCyclonic areasC1 Supplement 6: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade MGP15 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 72006 Residential timber-framed constructionCyclonic areasC1 Supplement 7: Timber framing span tablesWind classification C1WA seasoned hardwood Stress Grade F14 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 82006 Residential timber-framed constructionCyclonic areasC1 Supplement 8: Timber framing span tablesWind classification C1Seasoned hardwood Stress Grade F17(Supplement to AS1684.32006) AS 1684.3 C1 Supplement 92006 Residential timber-framed constructionCyclonic areasC1 Supplement 9: Timber framing span tablesWind classification C1Seasoned hardwood Stress Grade F27(Supplement to AS1684.32006) AS 1684.3 C1 Supplement 102006 Residential timber-framed constructionCyclonic areasC1 Supplement 10: Timber framing span tablesWind classification C1Unseasoned softwood Stress Grade F5 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 112006 Residential timber-framed constructionCyclonic areasC1 Supplement 11: Timber framing span tablesWind classification C1Unseasoned softwood Stress Grade F7 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 122006 Residential timber-framed constructionCyclonic areasC1 Supplement 12: Timber framing span tablesWind classification C1Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 132006 Residential timber-framed constructionCyclonic areasC1 Supplement 13: Timber framing span tablesWind classification C1Unseasoned hardwoodStress Grade F11 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 142006 Residential timber-framed constructionCyclonic areasC1 Supplement 14: Timber framing span tablesWind classification C1Unseasoned hardwoodStress Grade F14 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 152006 Residential timber-framed constructionCyclonic areasC1 Supplement 15: Timber framing span tablesWind classification C1Unseasoned hardwoodStress Grade F17 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 12006 Residential timber-framed constructionCyclonic areasC2 Supplement 1: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade F5 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 22006 Residential timber-framed constructionCyclonic areasC2 Supplement 2: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade F7 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 32006 Residential timber-framed constructionCyclonic areasC2 Supplement 3: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade F8 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 42006 Residential timber-framed constructionCyclonic areasC2 Supplement 4: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade MGP10 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 52006 Residential timber-framed constructionCyclonic areasC2 Supplement 5: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade MGP12 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 62006 Residential timber-framed constructionCyclonic areasC2 Supplement 6: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade MGP15 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 72006 Residential timber-framed constructionCyclonic areasC2 Supplement 7: Timber framing span tablesWind classification C2WA seasoned hardwood Stress Grade F14 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 82006 Residential timber-framed constructionCyclonic areasC2 Supplement 8: Timber framing span tablesWind classification C2Seasoned hardwood Stress Grade F17 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 92006 Residential timber-framed constructionCyclonic areasC2 Supplement 9: Timber framing span tablesWind classification C2Seasoned hardwood Stress Grade F27 (Supplement to AS1684.32006)
AS 1684.2 N4 Supplement 12006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 1: Timber framing span tablesWind classification N4Seasoned softwood Stress Grade F5(Supplement to AS1684.22006) AS 1684.2 N4 Supplement 22006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 2: Timber framing span tablesWind classification N4Seasoned softwood Stress Grade F7 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 32006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 3: Timber framing span tablesWind classification N4Seasoned softwood Stress Grade F8 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 42006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 4: Timber framing span tablesWind classification N4Seasoned softwood Stress Grade MGP10 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 52006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 5: Timber framing span tablesWind classification N4Seasoned softwood Stress Grade MGP12 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 62006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 6: Timber framing span tablesWind classification N4Seasoned softwood Stress Grade MGP15 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 72006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 7: Timber framing span tablesWind classification N4WA seasoned hardwoodStress Grade F14 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 82006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 8: Timber framing span tablesWind classification N4Seasoned hardwood Stress Grade F17 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 92006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 9: Timber framing span tablesWind classification N4Seasoned hardwood Stress Grade F27 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 102006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 10: Timber framing span tablesWind classification N4Unseasoned softwoodStress Grade F5 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 112006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 11: Timber framing span tablesWind classification N4Unseasoned softwoodStress Grade F7 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 122006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 12: Timber framing span tablesWind classification N4Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 132006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 13: Timber framing span tablesWind classification N4Unseasoned hardwoodStress Grade F11 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 142006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 14: Timber framing span tablesWind classification N4Unseasoned hardwoodStress Grade F14 (Supplement to AS1684.22006) AS 1684.2 N4 Supplement 152006 Residential timber-framed constructionNon-cyclonic areasN4 Supplement 15: Timber framing span tablesWind classification N4Unseasoned hardwoodStress Grade F17 (Supplement to AS1684.22006) AS 1684.32006 Residential timber-framed constructionCyclonic areas AS 1684.3 Supplement 02006 Residential timber-framed constructionCyclonic areasGeneral introduction and index (Supplement to AS 1684.32006) AS 1684.3 C1 Supplement 12006 Residential timber-framed constructionCyclonic areasC1 Supplement 1: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade F5 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 22006 Residential timber-framed constructionCyclonic areasC1 Supplement 2: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade F7 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 32006 Residential timber-framed constructionCyclonic areasC1 Supplement 3: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade F8(Supplement to AS1684.32006) AS 1684.3 C1 Supplement 42006 Residential timber-framed constructionCyclonic areasC1 Supplement 4: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade MGP10 (Supplement to AS1684.32006)
434
SUBJECT INDEX
AS 1684.3 C2 Supplement 102006 Residential timber-framed constructionCyclonic areasC2 Supplement 10: Timber framing span tablesWind classification C2Unseasoned softwood Stress Grade F5 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 112006 Residential timber-framed constructionCyclonic areasC2 Supplement 11: Timber framing span tablesWind classification C2Unseasoned softwood Stress Grade F7 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 122006 Residential timber-framed constructionCyclonic areasC2 Supplement 12: Timber framing span tablesWind classification C2Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 132006 Residential timber-framed constructionCyclonic areasC2 Supplement 13: Timber framing span tablesWind classification C2Unseasoned hardwoodStress Grade F11 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 142006 Residential timber-framed constructionCyclonic areasC2 Supplement 14: Timber framing span tablesWind classification C2Unseasoned hardwoodStress Grade F14 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 152006 Residential timber-framed constructionCyclonic areasC2 Supplement 15: Timber framing span tablesWind classification C2Unseasoned hardwoodStress Grade F17 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 12006 Residential timber-framed constructionCyclonic areasC3 Supplement 1: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade F5 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 22006 Residential timber-framed constructionCyclonic areasC3 Supplement 2: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade F7 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 32006 Residential timber-framed constructionCyclonic areasC3 Supplement 3: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade F8(Supplement to AS1684.32006) AS 1684.3 C3 Supplement 42006 Residential timber-framed constructionCyclonic areasC3 Supplement 4: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade MGP10 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 52006 Residential timber-framed constructionCyclonic areasC3 Supplement 5: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade MGP12 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 62006 Residential timber-framed constructionCyclonic areasC3 Supplement 6: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade MGP15 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 72006 Residential timber-framed constructionCyclonic areasC3 Supplement 7: Timber framing span tablesWind classification C3WA seasoned hardwood Stress Grade F14 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 82006 Residential timber-framed constructionCyclonic areasC3 Supplement 8: Timber framing span tablesWind classification C3Seasoned hardwood Stress Grade F17 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 92006 Residential timber-framed constructionCyclonic areasC3 Supplement 9: Timber framing span tablesWind classification C3Seasoned hardwood Stress Grade F27 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 102006 Residential timber-framed constructionCyclonic areasC3 Supplement 10: Timber framing span tablesWind classification C3Unseasoned softwood Stress Grade F5(Supplement to AS1684.32006) AS 1684.3 C3 Supplement 112006 Residential timber-framed constructionCyclonic areasC3 Supplement 11: Timber framing span tablesWind classification C3Unseasoned softwood Stress Grade F7 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 122006 Residential timber-framed constructionCyclonic areasC3 Supplement 12: Timber framing span tablesWind classification C3Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 132006 Residential timber-framed constructionCyclonic areasC3 Supplement 13: Timber framing span tablesWind classification C3Unseasoned hardwoodStress Grade F11 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 142006 Residential timber-framed constructionCyclonic areasC3 Supplement 14: Timber framing span tablesWind classification C3Unseasoned hardwoodStress Grade F14 (Supplement to AS1684.32006)
AS 1684.3 C3 Supplement 152006 Residential timber-framed constructionCyclonic areasC3 Supplement 15: Timber framing span tablesWind classification C3Unseasoned hardwoodStress Grade F17 (Supplement to AS1684.32006) AS 1684.42006 Residential timber-framed construction SimplifiedNon-cyclonic areas AS 1720.11997 Timber structuresDesign methods AS 1720.22006 Timber structuresTimber properties AS 1720.42006 Timber structuresFire resistance for structural adequacy of timber members AS 1720.41990 Timber structuresFire-resistance of structural timber members AS 3660 (Set) Termite management AS 3660.12000 Termite managementNew building work AS/NZS 4364(Int):2007 TimberBond performance of structural adhesives AS 44402004 Installation of nailplated timber roof trusses AS 44461999 Manufacture of nailplate-joined timber products CD DOMESTIC2007 Domestic Building Standards CD CD STRUCTURAL2007 Structural Engineering Standards on CD HB 441993 Understanding the Timber Framing Codea guide to AS 16841992 The National Timber Framing Code HB 44 Supplement 11995 A Guide to the Timber Framing Code Standard fixing and tie-down requirements 28 m/s sheet roof Tie-down check sheet 1st edition HB 44 Supplement 21995 A Guide to the Timber Framing Code Standard fixing and tie-down requirements 28 m/s or 33 m/s tiled roofTie-down check sheet 1st edition HB 44 Supplement 31995 A Guide to the Timber Framing Code Standard fixing and tie-down requirements 33 m/s sheet or 41 m/s tiled roof materialTie-down check sheet 1st edition HB 44 Supplement 41995 A Guide to the Timber Framing Code Standard fixing and tie-down requirements 41 m/s sheet roof JD4 framing materialTie-down check sheet 1st edition HB 1081998 Timber Design HandbookIn accordance with the Australian Limit State Timber Design Code, AS 1720.11997 SURFACE TREATMENT AND COATING Enamels AS 19142002 Vitreous enamel coatingsGlossary of terms AS 2219.1.12002 Methods of test for vitreous enamel coatings Chemical testsDetermination of resistance of vitreous enamel coatings to hot sodium hydroxide AS 2219.1.22002 Methods of test for vitreous enamel coatings Chemical testsDetermination of resistance of vitreous enamel coatings to boiling water and water vapour AS 2219.1.32002 Methods of test for vitreous enamel coatings Chemical testsDetermination of resistance of vitreous enamel coatings to boiling hydrochloric acid AS 2219.1.52002 Methods of test for vitreous enamel coatings Chemical testsDetermination of resistance of vitreous enamel coatings to citric acid at room temperature AS 2219.2.12002 Methods of test for vitreous enamel coatings Physical testsDetermination of resistance of vitreous enamel coatings on metal substrates to thermal shock AS 2219.3.12003 Methods of test for vitreous enamel coatings Miscellaneous testsMethod of test of self-cleaning properties AS 2219.3.22003 Methods of test for vitreous enamel coatings Miscellaneous testsProduction of specimens for testing AS 2219.3.32002 Methods of test for vitreous enamel coatings Miscellaneous testsDetermination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) Metallic coatings AS 11922004 Electroplated coatingsNickel and chromium AS 12141983 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) AS 14062004 Electroplated coatingsNickel and chromium on plastics for decorative applications AS 17892003 Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) AS 18562004 Electroplated coatingsSilver AS 18971976 Electroplated coatings on threaded components (metric coarse series) AS 19012004 Electroplated coatingsGold and gold alloys AS 22392003 Galvanic (sacrificial) anodes for cathodic protection AS 23092008 Durability of galvanized and electrogalvanized zinc coatings for the protection of steel in structural applications Atmospheric
435
SUBJECT INDEX
AS 24292004 Electroplated coatings of rhodium for general engineering applications AS 24532004 Electroplated coatingsChromium for engineering applications AS 2832.12004 Cathodic protection of metalsPipes and cables AS 2832.22003 Cathodic protection of metalsCompact buried structures AS 2832.32005 Cathodic protection of metalsFixed immersed structures AS 2832.42006 Cathodic protection of metalsInternal surfaces AS 2832.52008 Cathodic protection of metalsSteel in concrete structures AS 41082005 Metal finishingGlossary of terms in electroplating and related processes AS 41692004 Electroplated coatingsTin and tin alloys AS 43522005 Tests for coating resistance to cathodic disbonding AS 43972007 Electroplated coatings of zinc on steel fasteners with imperial threads AS/NZS 4534:2006 Zinc and zinc/aluminium-alloy coatings on steel wire AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles AS 47502003 Electrogalvanized (zinc) coatings on ferrous hollow and open sections AS/NZS 4791:2006 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process AS/NZS 4792:2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process AS 4827.12008 Coating defect surveys for buried pipelinesDirect current voltage gradient (DCVG) AS 4848.12006 Application specifications for coating systems Single coat inorganic (ethyl) zinc silicateSolvent-borne AS 50562006 Metallic coatingsPowder metal (and composites) applied by mechanical means at ambient temperature AS B1931970 Hot-dip galvanized coating on fasteners (BSW and UNC threads) RUL ML.12008 Rulings to metal StandardsCathodic protection interference levels (Ruling to AS 2832.12004) Other treatments and coatings AS 12812001 Cement mortar lining of steel pipes and fittings AS/NZS 1516:1994 The cement mortar lining of pipelines in situ AS/NZS 1518:2002 External extruded high-density-polyethylene coating system for pipes AS 25181992 Fusion-bonded low-density polyethylene coating for pipes and fittings AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applicationsPerformance requirements AS 36802008 Polyethylene sleeving for ductile iron piping AS 36812008 Application of polyethylene sleeving for ductile iron piping AS/NZS 3862:2002 External fusion-bonded epoxy coating for steel pipes AS/NZS 4158:2003 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes AS 43212001 Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings AS 4848.12006 Application specifications for coating systems Single coat inorganic (ethyl) zinc silicateSolvent-borne Surface preparation AS 1627.01997 Metal finishingPreparation and pretreatment of surfacesMethod selection guide AS 1627.12003 Metal finishingPreparation and pretreatment of surfacesRemoval of oil, grease and related contamination AS 1627.22002 Metal finishingPreparation and pretreatment of surfacesPower tool cleaning AS 1627.42005 Metal finishingPreparation and pretreatment of surfacesAbrasive blast cleaning of steel AS 1627.52003 Metal finishingPreparation and pretreatment of surfacesPickling AS 1627.62003 Metal finishingPreparation and pretreatment of surfacesChemical conversion treatment of metals AS 1627.92002 Metal finishingPreparation and pretreatment of surfacesPictorial surface preparation standards for painting steel surfaces
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings AS 2331.02006 Methods of test for metallic and related coatings Method selection guide AS 2331.1.12001 Methods of test for metallic and related coatingsLocal thickness testsMicrographic examination of crosssections AS 2331.1.22001 Methods of test for metallic and related coatingsLocal thickness testsCoulometric method AS 2331.1.32001 Methods of test for metallic and related coatingsLocal thickness testsMagnetic method AS 2331.1.42001 Methods of test for metallic and related coatingsLocal thickness testsMagnetic induction and eddy current methods AS 2331.1.52001 Methods of test for metallic and related coatingsLocal thickness testsBeta-backscatter method AS 2331.1.62004 Methods of test for metallic and related coatingsLocal thickness testsTaper section method AS 2331.1.72006 Methods of test for metallic and related coatingsLocal thickness testsMeasurement of dry film thickness of thin coating systems particularly by coil coated products by destructive means using a boring device AS 2331.2.12001 Methods of test for metallic and related coatingsTests for average coating mass per unit area or for thicknessDissolution methodsStrip and weigh and analytical AS 2331.2.32001 Methods of test for metallic and related coatingsTests for average coating mass per unit area or for thicknessHydrogen evolution method for zinc coatings AS 2331.3.12001 Methods of test for metallic and related coatingsCorrosion and related property testsNeutral salt spray (NSS) test AS 2331.3.22001 Methods of test for metallic and related coatingsCorrosion and related property testsAcetic acid salt spray test (ASS test) AS 2331.3.32001 Methods of test for metallic and related coatingsCorrosion and related property testsCopper accelerated acetic acid salt spray test (CASS test) AS 2331.3.42001 Methods of test for metallic and related coatingsCorrosion and related property testsThioacetamide antitarnish and porosity tests AS 2331.3.52001 Methods of test for metallic and related coatingsCorrosion and related property testsSulfur dioxide/hydrogen sulfide porosity tests AS 2331.3.62001 Methods of test for metallic and related coatingsCorrosion and related property testsElectrographic porosity test AS 2331.3.72004 Methods of test for metallic and related coatingsCorrosion and related property testsCorrodkote (Corr) test (ISO 4541:1978, MOD) AS 2331.3.82001 Methods of test for metallic and related coatingsCorrosion and related property testsHumidity test24 h cycle, damp heat AS 2331.3.92001 Methods of test for metallic and related coatingsCorrosion and related property testsMetallic coatings Porosity testsFerroxyl test AS 2331.3.102001 Methods of test for metallic and related coatingsCorrosion and related property testsCracks and pores in chromium AS 2331.3.112004 Methods of test for metallic and related coatingsCorrosion and related property testsChemical residue tests AS 2331.3.122006 Methods of test for metallic and related coatingsCorrosion and related property testsCyclic salt fog/UV exposure of organically coated metal AS 2331.3.132006 Methods of test for metallic and related coatingsCorrosion and related property testsWet (salt fog)/dry/humidity AS 2331.4.12001 Methods of test for metallic and related coatingsPhysical testsQualitative adhesion tests AS 2331.4.22004 Methods of test for metallic and related coatingsPhysical testsDuctility AS 2331.4.42001 Methods of test for metallic and related coatingsPhysical testsAssessment of intensity of shot-peening AS 2331.4.52001 Methods of test for metallic and related coatingsPhysical testsElectroplated plasticsThermal cycling tests AS 2331.4.72006 Methods of test for metallic and related coatingsPhysical testsResistance to scratching
436
SUBJECT INDEX
AS 1627.91989 Metal finishingPreparation and pretreatment of surfacesPictorial surface preparation standards for painting steel surfaces Surface treatment AS 12312000 Aluminium and aluminium alloysAnodic oxidation coatings AS 12472004 Metallic coatingsRating of test specimens and manufactured articles subject to corrosion tests AS 37152002 Metal finishingThermoset powder coating for architectural applications of aluminium and aluminium alloys AS 37541990 Safe application of powder coatings by electrostatic spraying AS 45062005 Metal finishingThermoset powder coatings Surface treatment and coating in general AS 24832003 Metal finishingRecommended sampling plans for the inspection and testing of coatings (ISO 4519:1980, MOD) AS 3894.02002 Site testing of protective coatingsIntroduction and list of test methods AS 3894.12002 Site testing of protective coatingsNon-conductive coatingsContinuity testingHigh voltage ('brush') method AS 3894.22002 Site testing of protective coatingsNon-conductive coatingsContinuity testingWet sponge method AS 3894.32002 Site testing of protective coatingsDetermination of dry film thickness AS 3894.42002 Site testing of protective coatingsAssessment of degree of cure AS 3894.52002 Site testing of protective coatingsDetermination of surface profile AS 3894.62002 Site testing of protective coatingsDetermination of residual contaminants AS 3894.72002 Site testing of protective coatingsDetermination of surface temperature AS 3894.82002 Site testing of protective coatingsVisual determination of gloss AS 3894.92003 Site testing of protective coatingsDetermination of adhesion AS 3894.102002 Site testing of protective coatingsInspection reportDaily surface and ambient conditions AS 3894.112002 Site testing of protective coatingsEquipment report AS 3894.122002 Site testing of protective coatingsInspection reportCoating AS 3894.132002 Site testing of protective coatingsInspection reportDaily AS 3894.142002 Site testing of protective coatingsInspection reportDaily painting AS 48222008 External field joint coatings for steel pipelines AS 4848.12006 Application specifications for coating systems Single coat inorganic (ethyl) zinc silicateSolvent-borne SWITCHGEAR AND CONTROLGEAR High voltage switchgear and controlgear AS 20241991 High voltage a.c. switchgear and controlgear Switch-fuse combinations AS 26502005 Common specifications for high-voltage switchgear and controlgear standards (IEC60694, Ed.2.2(2002) MOD) AS 27911996 High-voltage switchgear and controlgearUse and handling of sulphur hexafluoride (SF6) in high-voltage switchgear and controlgear AS 29812008 High voltage a.c. switchgear and controlgear Vacuum interruptersHigh voltage testingProtection of personnel from x-ray emission AS EN 500522008 Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear AS EN 500642008 Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear AS 60214.12005 Tap-changersPerformance requirements and test methods AS/NZS 60265.1:2001 High-voltage switchesSwitches for rated voltages above 1 kV and less than 52 kV AS 60265.22005 High-voltage switchesHigh-voltage switches for rated voltages of 52kV and above (IEC60265-2, Ed.1.0(1988) MOD) AS 62271.1002008 High-voltage switchgear and controlgear High-voltage alternating-current circuit-breakers (IEC 62271100, Ed. 1.2 (2006) MOD)
AS 62271.1022005 High voltage switchgear and controlgear Alternating current disconnectors and earthing switches (IEC 62271-102, Ed.1.0(2003) MOD) AS 62271.1102006 High-voltage switchgear and controlgear Inductive load switching AS 62271.2002005 High-voltage switchgear and controlgearA.C. metal-enclosed switchgear and controlgear for rated voltages above 1kV and up to and including 52kV (IEC 62271-200, Ed. 1 (2003) MOD) AS 62271.2012008 High-voltage switchgear and controlgearAC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV AS 62271.2022008 High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation AS 62271.2032005 High-voltage switchgear and controlgearGasinsulated metal-enclosed switchgear for rated voltages above 52kV (IEC62271-203, Ed. 1.0 (2003) MOD) AS 62271.3012005 High voltage switchgear and controlgear Dimensional standardization of terminals AS 62271.3082005 High voltage switchgear and controlgear Guide for asymmetrical short-circuit breaking test duty T100a Low voltage switchgear and controlgear AS 21841985 Low voltage switchgear and controlgearMouldedcase circuit-breakers for rated voltages up to and including 600 V a.c. and 250 V d.c. AS 27561997 Low-voltage switchgear and controlgearMounting rails for mechanical support of electrical equipment AS/NZS 3439.1:2002 Low-voltage switchgear and controlgear assembliesType-tested and partially type-tested assemblies AS/NZS 3439.2:2002 Low-voltage switchgear and controlgear assembliesParticular requirements for busbar trunking systems (busways) AS/NZS 3439.3:2002 Low-voltage switchgear and controlgear assembliesParticular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their useDistribution boards (IEC 60439-3:1990, MOD) AS 3439.41995 Low-voltage switchgear and controlgear assembliesParticular requirements for assemblies for construction sites (ACS) AS/NZS 3947.3:2001 Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fusecombination units AS/NZS 3947.3 Supplement 1:2001 Low-voltage switchgear and controlgearSwitches, disconnectors, switch-disconnectors and fuse-combination unitsFuse-switch-disconnectors and switchdisconnectors for use with low-voltage aerial bundled cables (Supplement to AS/NZS 3947.3:2001) AS/NZS 3947.4.3:2000 Low-voltage switchgear and controlgear Contactors and motor-startersA.C. semiconductor controllers and contactors for non-motor loads AS/NZS 3947.5.3:2000 Low-voltage switchgear and controlgear Control circuit devices and switching elementsRequirements for proximity devices with define behaviour under fault conditions AS/NZS 3947.5.5:2000 Low-voltage switchgear and controlgear Control circuit devices and switching elementsElectrical emergency stop device with mechanical latching function AS/NZS 3947.5.6:2000 Low-voltage switchgear and controlgear Control circuit devices and switching elementsD.C.interface for proximity sensors and switching amplifiers (NAMUR) AS/NZS 3947.6.1:2001 Low-voltage switchgear and controlgear Multiple Function equipmentAutomatic transfer switching equipment AS 43881996 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of lowvoltage switchgear and controlgear AS 60947.12004 Low-voltage switchgear and controlgear General rules AS 60947.22005 Low-voltage switchgear and controlgearCircuitbreakers AS 60947.4.12004 Low-voltage switchgear and controlgear Contactors and motor-startersElectromechanical contactors and motor-starters AS 60947.4.22004 Low-voltage switchgear and controlgear Contactors and motor-startersA.C. semiconductor motor controllers and starters
437
TECHNICAL DRAWINGS
SUBJECT INDEX
AS/NZS 3000T (H) Set:2008 AS/NZS 3000, Wiring Rules (Hardbound) + Electrical Standards + FREE T-shirt AS/NZS 3000T (P) Set:2008 AS/NZS 3000, Wiring Rules (Paperback) + Electrical Standards + FREE T-shirt Mechanical engineering drawings HB 71993 Engineering drawing handbook Other standards related to technical drawings AS 1203.11996 Microfilming of engineering documentsOperating procedures AS 1203.21996 Microfilming of engineering documentsQuality criteria and control AS 1203.31996 Microfilming of engineering documentsUnitized 35 mm microfilm carriers AS 1203.41996 Microfilming of engineering documents Microfilming of drawings of special and exceptional elongated sizes Technical drawings in general AS ISO 128.12005 Technical drawingsGeneral principles of presentationIntroduction and index AS ISO 128.202005 Technical drawingsGeneral principles of presentationBasic conventions for lines AS ISO 128.212005 Technical drawingsGeneral principles of presentationPreparation of lines by CAD systems AS ISO 128.222005 Technical drawingsGeneral principles of presentationBasic conventions and applications for leader lines and reference lines AS ISO 128.232005 Technical drawingsGeneral principles of presentationLines on construction drawings AS ISO 128.242005 Technical drawingsGeneral principles of presentationLines on mechanical engineering drawings AS ISO 128.252005 Technical drawingsGeneral principles of presentationLines on shipbuilding drawings AS 1100.1011992 Technical drawingGeneral principles AS 1100.2011992 Technical drawingMechanical engineering drawing AS 1100.3012008 Technical drawingArchitectural drawing AS 1100.4011984 Technical drawingEngineering survey and engineering survey design drawing AS/NZS 1100.501:2002 Technical drawingStructural engineering drawing AS ISO 13022005 Geometrical product specifications (GPS) Indication of surface texture in technical product documentation HB 1:1994 Technical drawing for students HB 471993 Dimensioning and tolerancing to AS 1100.1011992 and AS 1100.2011992 TECHNICAL PRODUCT DOCUMENTATION AS/NZS 1388:1994 Guidelines for technical information for building and construction products AS 38971991 Information processingGuidelines for the management of software documentation AS 38981991 Information processingUser documentation and cover information for consumer software packages AS 13567.11999 Technical product documentationOrganization and naming of layers for CADOverview and principles AS 13567.21999 Technical product documentationOrganization and naming of layers for CADConcepts, format and codes used in construction documentation TELECOMMUNICATION SERVICES. APPLICATIONS AS/NZS 4117:1999 Surge protective devices for telecommunication applications TELECOMMUNICATION SYSTEMS HB 2522007 Communications Cabling ManualModule 3: Residential communications cabling handbook AS/ACIF S042.1:2006 Requirements for connection to an air interface of a Telecommunications NetworkPart 1: General AS/ACIF S042.3:2005 Requirements for connection to an air interface of a Telecommunications NetworkPart 3: GSM Customer Equipment CCM Volume 12007 Communications Cabling Manual Volume 1 Handbooks, codes and regulations CCM Volume 22007 Communications Cabling Manual Volume 2 Standards CCM Package2007 Communications Cabling Manual Package (Volumes 1 and 2)
AS 60947.5.12004 Low-voltage switchgear and controlgear Control circuit devices and switching elements Electromechanical control circuit devices AS 60947.5.22004 Low-voltage switchgear and controlgear Control circuit devices and switching elementsProximity switches AS 60947.5.42004 Low-voltage switchgear and controlgear Control circuit devices and switching elementsMethods of assessing the performance of low-energy contactsSpecial tests AS 60947.5.72004 Low-voltage switchgear and controlgear Control circuit devices and switching elementsRequirements for proximity devices with analogue output AS 60947.6.22004 Low-voltage switchgear and controlgear Multiple function equipmentControl and protective switching devices (or equipment) (CPS) AS 60947.7.12004 Low-voltage switchgear and controlgear Ancillary equipmentTerminal blocks for copper conductors AS 60947.7.22004 Low-voltage switchgear and controlgear Ancillary equipmentProtective conductor terminal blocks for copper conductors AS 60947.7.32004 Low-voltage switchgear and controlgear Ancillary equipmentSafety requirements for fuse terminal blocks AS 60947.82005 Low-voltage switchgear and controlgearControl units for built-in thermal protection (PTC) for rotating electrical machines ATS 619152005 Low-voltage switchgear and controlgear Principles for the development of device profiles for networked industrial devices AS/NZS 62026.1:2001 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs)General rules AS/NZS 62026.2:2001 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs)Actuator sensor interface AS/NZS 62026.3:2001 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs)DeviceNet AS/NZS 62026.5:2001 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs)Smart distributed system (SDS) AS/NZS 62026.6:2002 Low-voltage switchgear and controlgear Controller-device interfaces (CDIs)Seriplex (Serial multiplexed control bus) AS 622082006 Empty enclosures for low-voltage switchgear and controlgear assembliesGeneral requirements Other switchgear and controlgear AS 42781995 A method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA) Switchgear and controlgear in general AS/NZS 1102.107:1997 Graphical symbols for electrotechnical documentationSwitchgear, controlgear and protective devices AS 1852.4411985 International electrotechnical vocabulary Switchgear, controlgear and fuses AS 20672008 Substations and high voltage installations exceeding 1 kV a.c. AS 24672008 Maintenance of electrical switchgear AS 42431994 Additional requirements for enclosed switchgear and controlgear from 1 kV to 72.5 kV to be used in severe climatic conditions AS 62271.2002005 High-voltage switchgear and controlgearA.C. metal-enclosed switchgear and controlgear for rated voltages above 1kV and up to and including 52kV (IEC 62271-200, Ed. 1 (2003) MOD) AS 62271.2012008 High-voltage switchgear and controlgearAC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV AS 62271.2032005 High-voltage switchgear and controlgearGasinsulated metal-enclosed switchgear for rated voltages above 52kV (IEC62271-203, Ed. 1.0 (2003) MOD) AS 62271.3012005 High voltage switchgear and controlgear Dimensional standardization of terminals TECHNICAL DRAWINGS Construction drawings AS 13567.21999 Technical product documentationOrganization and naming of layers for CADConcepts, format and codes used in construction documentation Electrical and electronics engineering drawings AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
438
SUBJECT INDEX
Data communication networks AS/NZS 4134:1995 Information technologyTelecommunications and information exchange between systemsNumbering and sub-addressing in private integrated services networks AS/NZS 4135:1995 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkCircuit-mode 64 kbit/s bearer services Service description, functional capabilities and information flows AS/NZS 4136.1:1995 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkReference configuration for PISN exchanges (PINX) AS/NZS 4138:1995 Information technologyTelecommunications and information exchange between systemsSynchronization methods and technical requirements for private integrated services networks AS 61850.12005 Communication networks and systems in substationsIntroduction and overview AS 61850.22005 Communication networks and systems in substationsGlossary AS 61850.32005 Communication networks and systems in substationsGeneral requirements AS 61850.42005 Communication networks and systems in substationsSystem and project management AS 61850.52005 Communication networks and systems in substationsCommunication requirements for functions and device models AS 61850.62005 Communication networks and systems in substationsConfiguration description language for communication in electrical substations related to IEDs AS 61850.7.12005 Communication networks and systems in substationsBasic communication structure for substation and feeder equipmentPrinciples and models AS 61850.7.22005 Communication networks and systems in substationsBasic communication structure for substation and feeder equipmentAbstract communication service interface (ACSI) AS 61850.7.32005 Communication networks and systems in substationsBasic communication structure for substation and feeder equipmentCommon data classes AS 61850.7.42005 Communication networks and systems in substationsBasic communication structure for substation and feeder equipmentCompatible logical node classes and data classes AS 61850.8.12005 Communication networks and systems in substationsSpecific communication service mapping (SCSM) Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 AS 61850.9.12005 Communication networks and systems in substationsSpecific communication service mapping (SCSM) Sampled values over serial unidirectional multidrop point to point link AS 61850.9.22005 Communication networks and systems in substationsSpecific communication service mapping (SCSM) Sampled values over ISO/IEC8802-3 HB 2522007 Communications Cabling ManualModule 3: Residential communications cabling handbook AS/ACIF S042.3:2005 Requirements for connection to an air interface of a Telecommunications NetworkPart 3: GSM Customer Equipment CCM Volume 12007 Communications Cabling Manual Volume 1 Handbooks, codes and regulations CCM Volume 22007 Communications Cabling Manual Volume 2 Standards CCM Package2007 Communications Cabling Manual Package (Volumes 1 and 2) Lines, connections and circuits AS/NZS 3080:2003 Telecommunications installationsGeneric cabling for commercial premises (ISO/IEC 11801:2002, MOD) AS/NZS ISO/IEC 15018:2005 Information technologyGeneric cabling for homes AS/NZS ISO/IEC 24702:2007 Telecommunications installations Generic cablingIndustrial premises AS/NZS IEC 61935.1:2006 Testing of balanced communication cabling in accordance with ISO/IEC 11801Installed cabling AS/NZS IEC 61935.2:2006 Testing of balanced communication cabling in accordance with ISO/IEC 11801Patch cords and work area cords
TELECOMMUNICATION SYSTEMS
HB 27:1996 Handbook for field testing of balanced cable installations HB 292007 Communications cabling manualModule 2: Communications cabling handbook HB 871997 (CJC 1) Joint use of poles: The placement on poles of power lines and paired cable telecommunications lines HB 881997 (CJC 2) Unbalanced high voltage power lines: Code of practice for the mitigation of noise induced into paired cable telecommunications lines from unbalanced high voltage power lines HB 1002000 (CJC 4) Coordination of power and telecommunicationsManual for the establishment of safe work practices and the minimization of operational interference between power systems and paired cable telecommunications systems HB 1011997 (CJC 5) Coordination of power and telecommunicationsLow Frequency Induction (LFI): Code of practice for the mitigation of hazardous voltages induced into telecommunications lines HB 1021997 (CJC 6) Coordination of power and telecommunicationsLow Frequency Induction (LFI): Application Guide to the LFI Code HB 1031997 (CJC 7) Coordination of power and telecommunicationsCrossings Code: The arrangement of overhead power and telecommunications lines, pole stay wires, and suspension wires HB 2432007 Communications Cabling ManualModule 1: Australian regulatory arrangements ACA TS 0081997 Requirements for Authorised Cabling Products ACA TS 0241997 Broadcaster Interface Standard ACA TS 1021998 Telecommunications Technical Standard (Customer Equipment and Customer Cabling) ACIF G548:1999 Supporting arrangements for AS/ACIF S042 Requirements for connection to an air interface of a telecommunications network AS/ACIF S008:2006 Requirements for customer cabling products AS/ACIF S009:2006 Installation requirements for customer cabling (Wiring Rules) AS/ACIF S042.1:2006 Requirements for connection to an air interface of a Telecommunications NetworkPart 1: General AS/ACIF S042.2:1999 Requirements for connection to an air interface of a telecommunications networkCDMA (IS-95) AS/ACIF S042.3:2005 Requirements for connection to an air interface of a Telecommunications NetworkPart 3: GSM Customer Equipment Powerline telecommunications ACA TS 0251997 General Requirements for Line Isolation Devices connected between Airservices Australia Facilities and a Telecommunications Network Switching and signalling systems AS/NZS 4263:2003 Interactive voice response systemsUserinterfaceDual tone multi frequency (DTMF) signalling AS 50612008 Interactive voice response systems user interface Speech recognition AS/ACIF S042.3:2005 Requirements for connection to an air interface of a Telecommunications NetworkPart 3: GSM Customer Equipment Telecommunication systems in general AS/NZS 3015:2004 Electrical installationsExtra-low voltage d.c. power supplies and service earthing within public telecommunications networks AS/NZS 3080:2003 Telecommunications installationsGeneric cabling for commercial premises (ISO/IEC 11801:2002, MOD) AS/NZS 3084:2003 Telecommunications installations Telecommunications pathways and spaces for commercial buildings AS 30841993 Telecommunications installations Telecommunications pathways and spaces for commercial buildings AS/NZS 3085.1:2004 Telecommunications installations Administration of communications cabling systemsBasic requirements AS/NZS ISO/IEC 15018:2005 Information technologyGeneric cabling for homes AS/NZS ISO/IEC 24702:2007 Telecommunications installations Generic cablingIndustrial premises AS/NZS IEC 61935.1:2006 Testing of balanced communication cabling in accordance with ISO/IEC 11801Installed cabling
439
SUBJECT INDEX
AS/NZS 15052:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolRecall supplementary service AS/NZS 15053:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsCall interception additional network feature AS/NZS 15054:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolCall interception additional network feature AS/NZS 15055:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsTransit counter additional network feature AS/NZS 15056:1999 Information technologyTelecommunciations and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolTransit counter additional network feature AS/NZS 15505:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsMessage waiting indication supplementary service AS/NZS 15506:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolMessage waiting indication supplementary service AS/NZS 15507:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolPINX clock synchronization ACA TS 0031997 Customer Switching Systems Connected to the Public Switched Telephone Network AS/ACIF S003:2005 Customer Access Equipment for connection to a Telecommunications Network Transmission systems AS/NZS 1102.110:1997 Graphical symbols for electrotechnical documentationTelecommunicationsTransmission AS/NZS 3084:2003 Telecommunications installations Telecommunications pathways and spaces for commercial buildings AS 30841993 Telecommunications installations Telecommunications pathways and spaces for commercial buildings AS/NZS 3085.1:2004 Telecommunications installations Administration of communications cabling systemsBasic requirements AS/NZS ISO/IEC 15018:2005 Information technologyGeneric cabling for homes AS/NZS IEC 61935.2:2006 Testing of balanced communication cabling in accordance with ISO/IEC 11801Patch cords and work area cords HB 27:1996 Handbook for field testing of balanced cable installations ACA TS 1021998 Telecommunications Technical Standard (Customer Equipment and Customer Cabling) AS/ACIF S009:2006 Installation requirements for customer cabling (Wiring Rules) TELECOMMUNICATION TERMINAL EQUIPMENT AS/ACIF S041:2005 Requirements for DSL Customer Equipment for connection to the Public Switched Telephone Network Equipment for telex, teletext, telefax ACA TS 0071997 General Requirements for Customer Equipment Connected to the Telex Network Other telecommunication terminal equipment ACA TS 0151997 General Requirements for Analogue Video Equipment Connected to a Telecommunications Network Telecommunication terminal equipment in general HB 2432007 Communications Cabling ManualModule 1: Australian regulatory arrangements ACA TS 0021997 Analogue Interworking and Non-interference Requirements for Customer Equipment Connected to the Public Switched Telephone Network ACA TS 0041997 Voice Frequency Performance Requirements for Customer Equipment ACA TS 0061997 General Requirements for Customer Equipment Connected to the Non-switched Telephone Network
HB 292007 Communications cabling manualModule 2: Communications cabling handbook HB 2432007 Communications Cabling ManualModule 1: Australian regulatory arrangements HB 2522007 Communications Cabling ManualModule 3: Residential communications cabling handbook CCM Volume 12007 Communications Cabling Manual Volume 1 Handbooks, codes and regulations CCM Volume 22007 Communications Cabling Manual Volume 2 Standards CCM Package2007 Communications Cabling Manual Package (Volumes 1 and 2) Telephone networks AS/NZS 4064:1997 Information technologyTelecommunications and information exchange between systemsPrivate telecommunications networksDigital channel aggregation AS/NZS 11572:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkCircuit mode bearer servicesInter-exchange signalling procedures and protocol AS/NZS 13241:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolRoute restriction class additional network feature AS/NZS 13242:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsRoute restriction class additional network feature AS/NZS 13246:1999 Information technologyTelecommunications and information exchange between systemsBroadband private integrated services networkInter-exchange signalling protocol Signalling ATM adaptation layer AS/NZS 13247:1999 Information technologyTelecommunications and information exchange between systemsBroadband private integrated services networkInter-exchange signalling protocol Basic call/connection control AS/NZS 14475:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkArchitecture and scenarios for private integrated services networking AS/NZS 14841:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsCall offer supplementary service AS/NZS 14842:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsDo not disturb and do not disturb override supplementary services AS/NZS 14843:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolCall offer supplementary service AS/NZS 14844:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolDo not disturb and do not disturb override supplementary services AS/NZS 14845:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsCall intrusion supplementary service AS/NZS 14846:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolCall intrusion supplementary service AS/NZS 15049:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification, functional model and information flowsAdvice of charge supplementary services AS/NZS 15050:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkInter-exchange signalling protocolAdvice of charge supplementary services AS/NZS 15051:1999 Information technologyTelecommunications and information exchange between systemsPrivate integrated services networkSpecification functional model and information flowsRecall supplementary service
440
SUBJECT INDEX
ACA TS 0071997 General Requirements for Customer Equipment Connected to the Telex Network ACA TS 0141997 General Requirements for Customer Equipment Connected to an ISDN Primary Rate Interface ACA TS 0161997 General Requirements for Customer Equipment Connected to Hierarchical Digital Interfaces AS/ACIF S002:2005 Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network AS/ACIF S004:2004 Voice frequency performance requirements for Customer Equipment AS/ACIF S004 Supplement 1:2004 Voice frequency performance requirements for Customer Equipment Supplement 1: Stepped pulsed stimuli for time dependent limiting test AS/ACIF S006:2001 Requirements for Customer Equipment, operating in the voice band, for connection to the non-switched Telecommunications Network AS/ACIF S016:2001 General requirements for Customer Equipment for connection to hierarchical digital interfaces AS/ACIF S041:2005 Requirements for DSL Customer Equipment for connection to the Public Switched Telephone Network Telephone equipment AS/NZS 4281:2007 Radiocommunications requirements for cordless telephones operating in the 1.7 MHz and between 30 and 41 MHz frequency bands ACA TS 0021997 Analogue Interworking and Non-interference Requirements for Customer Equipment Connected to the Public Switched Telephone Network ACA TS 0041997 Voice Frequency Performance Requirements for Customer Equipment ACA TS 0061997 General Requirements for Customer Equipment Connected to the Non-switched Telephone Network ACA TS 0141997 General Requirements for Customer Equipment Connected to an ISDN Primary Rate Interface ACA TS 1021998 Telecommunications Technical Standard (Customer Equipment and Customer Cabling) ACIF G563:2001 Supporting arrangements for the supply of Digital Subscriber Line (DSL) Customer Equipment AS/ACIF S002:2005 Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network AS/ACIF S004:2004 Voice frequency performance requirements for Customer Equipment AS/ACIF S004 Supplement 1:2004 Voice frequency performance requirements for Customer Equipment Supplement 1: Stepped pulsed stimuli for time dependent limiting test AS/ACIF S006:2001 Requirements for Customer Equipment, operating in the voice band, for connection to the non-switched Telecommunications Network AS/ACIF S040:2001 Requirements for Customer Equipment for use with the Standard Telephone ServiceFeatures for special needs of persons with disabilities AS/ACIF S041:2005 Requirements for DSL Customer Equipment for connection to the Public Switched Telephone Network AS/ACIF S043.1:2003 Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications NetworkGeneral AS/ACIF S043.2:2005 Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications NetworkBroadband AS/ACIF S043.3:2001 Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications NetworkDC, low frequency AC and voiceband TELECOMMUNICATIONS IN GENERAL AS 1046.21978 Letter symbols for use in electrotechnology Telecommunications and electronics AS/NZS 1102.109:1997 Graphical symbols for electrotechnical documentationTelecommunicationsSwitching and peripheral equipment AS/NZS 1852.0:2000 International Electrotechnology Vocabulary Introduction and list of Parts of AS 1852 and IEC 60050 AS 1852.7011990 International electrotechnical vocabulary Telecommunications, channels and networks AS/NZS 3835.1:2006 Earth potential riseProtection of telecommunications network users, personnel and plantCode of practice AS/NZS 3835.2:2006 Earth potential riseProtection of telecommunications network users, personnel and plantApplication guide AS 4262.11995 Telecommunication overvoltagesProtection of persons AS 4262.21999 Telecommunication overvoltagesProtection of equipment
TELECOMMUNICATIONS IN GENERAL
AS IEC 60300.22005 Dependability managementGuidance for dependability programme management AS IEC 60300.3.32005 Dependability managementApplication guideLife cycle costing AS IEC 60300.3.142005 Dependability managementApplication guide Maintenance and maintenance support HB 219:2006 Earth potential riseProtection of telecommunications network users, personnel and plantWorked examples for the application guide TELECONTROL. TELEMETERING AS 1852.3711988 International electrotechnical vocabularyTelecontrol AS/NZS 3835.1:2006 Earth potential riseProtection of telecommunications network users, personnel and plantCode of practice AS/NZS 3835.2:2006 Earth potential riseProtection of telecommunications network users, personnel and plantApplication guide AS 4418.11996 Supervisory control and data acquisition (SCADA)Generic telecommunications interface and protocolGeneral AS 4418.22000 Supervisory control and data acquisition (SCADA)Generic telecommunications and interface protocolFire alarm systems AS 60870.1.11998 Telecontrol equipment and systemsGeneral considerationsGeneral principles AS 60870.1.21998 Telecontrol equipment and systemsGeneral considerationsGuide for specifications AS 60870.1.31998 Telecontrol equipment and systemsGeneral considerationsGlossary AS 60870.1.41998 Telecontrol equipment and systemsGeneral considerationsBasic aspects of telecontrol data transmission and organization of Standards IEC 60870-5 and IEC 60870-6 AS 60870.2.11998 Telecontrol equipment and systemsOperating conditionsPower supply and electromagnetic compatibility AS 60870.31998 Telecontrol equipment and systemsInterfaces (electrical characteristics) AS 60870.41998 Telecontrol equipment and systemsPerformance requirements AS 60870.5.11998 Telecontrol equipment and systemsTransmission protocolsTransmission frame formats AS 60870.5.21998 Telecontrol equipment and systemsTransmission protocolsLink transmission procedures AS 60870.5.31998 Telecontrol equipment and systemsTransmission protocolsGeneral structure of application data AS 60870.5.41998 Telecontrol equipment and systemsTransmission protocolsDefinition and coding of application information elements AS 60870.5.51998 Telecontrol equipment and systemsTransmission protocolsBasic application functions TELEMETERING see TELECONTROL. TELEMETERING TELEVISION AND RADIO BROADCASTING AS/NZS 4249:1994 Electrical safety practicesFilm, video and television sites AS/NZS 4414:1996 Ghost-cancelling reference signal for Australian and New Zealand PAL television broadcasting systems AS/NZS 4540:1999 Digital broadcasting systems for television, sound and data servicesFraming structure, channel coding and modulation for cable systems AS/NZS 4541:1999 Digital broadcasting systems for television, sound and data servicesFraming structure, channel coding and modulation for 11/12 GHz satellite services AS 4599.12007 Digital televisionTerrestrial broadcastingCharacteristics of digital terrestrial television transmissions ACA TS 0241997 Broadcaster Interface Standard TEST CONDITIONS AND PROCEDURES IN GENERAL AS 13272001 PlasticsStandard atmospheres for conditioning and testing AS 29291990 Test methodsGuide to the format, style and content AS 4433.11997 Guide to the sampling of particulate materialsSampling procedures AS 4433.21997 Guide to the sampling of particulate materialsPreparation of samples AS 4433.32002 Guide to the sampling of particulate materialsEstimating sampling precision AS 4433.42001 Guide to the sampling of particulate materialsChecking for bias AS 4433.62000 Guide to the sampling of particulate materialsInspection of mechanical sampling systems AS 49312000 Industrial wire screensTechnical requirements and testing AS 49642004 Method for the qualitative identification of asbestos in bulk samples HB 37.01995 Handbook of Australian fire StandardsFire test Standards Preparation, application and format
441
TESTING OF METALS
SUBJECT INDEX
AS/NZS 2574:2000 Non-destructive testingUltrasonic testing of ferritic steel castings AS 28242003 Non-destructive testingUltrasonic methods Evaluation and quality classification of metal bearing bonds AS 3507.12003 Non-destructive testingGuide to radiography for ferrous castings AS 3507.22006 Non-destructive testingRadiographic determination of quality of ferrous castings AS 39782003 Non-destructive testingVisual inspection of metal products and components AS 45442005 Non-destructive testingEddy current testing for the detection of surface flawsFerromagnetic and nonferromagnetic metallic products Other methods of testing of metals AS 17331976 Methods for the determination of grain size in metals AS 19821993 Methods for the measurement of case depth in steels AS 20031991 Carbon and low alloy steelMeasurement of decarburization AS 20281977 Methods for the measurement of the depth of hardening in flame and induction hardened steel products AS 20381977 Methods for detecting the susceptibility of austenitic stainless steels to intergranular corrosion AS 20871977 Methods for the macroscopic assessment of the non-metallic inclusion content in wrought steel AS 21971978 Method for the micrographic assessment of the nonmetallic inclusion content in wrought steel AS 25631996 Wavelength dispersive X-ray fluorescence spectrometersDetermination of precision TEXTILE AUXILIARY MATERIALS AS 24792007 Down and/or feather filling materials and filled products AS 4823.12006 Feather and downMethods of testDetermination of moisture content AS 4823.22006 Feather and downMethods of testDetermination of the oxygen index number AS 4823.32006 Feather and downMethods of testDetermination for the quantitative composition of feather and down (manual method) AS 4823.42006 Feather and downMethods of testSampling in view of tests AS 4823.52006 Feather and downMethods of testMeasuring the sizes of quilts filled with feather and/or down AS 4823.72006 Feather and downMethods of testDetermination of the turbidity of an aqueous extract TEXTILE FIBRES Natural fibres AS/NZS 1133:1996 WoolDetermination by the Airflow Method of the mean fibre diameter of core samples of raw wool AS/NZS 1134:1999 WoolDetermination of wool base and vegetable matter base of core samples of raw wool AS/NZS 1362:1998 WoolCalculation of IWTO combined certificates for deliveries of raw wool AS/NZS 1363.1:1996 WoolGrab samplingGreasy woolMethod for grab sampling greasy wool from bales AS/NZS 1809:1999 WoolThe preservation of the integrity of raw wool samples for display AS/NZS 2721:1996 WoolSubsampling staples from grab samples AS/NZS 2810:1997 WoolDetermination of staple length and staple strength AS 35352004 WoolMethod for the measurement of resistance to compression AS 35461996 WoolMethod for measuring average yellowness of raw wool AS/NZS 3829:1998 WoolIWTO Staple Test Regulations AS/NZS 3849:1999 WoolIWTO Condition Testing Regulations for Wool Tops AS 40541992 Scourable branding substances for greasy wool AS 41751994 WoolGlossary of terms relating to the testing of raw wool AS/NZS 4447:1997 WoolIWTO Core Test Regulations AS/NZS 4492.0:2000 WoolFleece testing and measurement Introduction and list of methods AS/NZS 4492.1:2000 WoolFleece testing and measurement Weighing and sampling greasy wool for fleece testing and measurement
MP 482008 Certified gas cylinder test stations MP 681992 Test method assessment sheet TESTING OF METALS Chemical analysis of metals AS 23142006 Radiography of metalsImage quality indicators (IQI) and recommendations for their use AS 28832000 Analysis of metalsProcedures for the setting up, calibration and standardization of atomic emission spectrometers using arc/spark discharge AS 38441998 Recommended practice for metal analysis by electrochemical stripping techniques Mechanical testing of metals AS 13302004 Metallic materialsDrop weight tear test for ferritic steels AS 13912007 Metallic materialsTensile testing at ambient temperature AS 1544.12003 Methods for impact tests on metalsIzod AS 1544.22003 Methods for impact tests on metalsCharpy Vnotch AS 1544.32003 Methods for impact tests on metalCharpy Unotch and keyhole notch AS 1544.42003 Methods for impact tests on metalsCalibration of the testing machine AS 1544.52003 Methods for impact tests on metalsAssessment of fracture surface appearance of steel AS 17702003 SteelHardenability test by end quench (Jominy test) AS 1815.12007 Metallic materialsRockwell hardness testTest method (scales A, B, C, D, E, F, G, H, K, N, T) AS 1815.22007 Metallic materialsRockwell hardness test Verification and calibration of testing machine (scales A, B, C, D, E, F, G, H, K, N, T) AS 1815.32007 Metallic materialsRockwell hardness test Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-3:2005, MOD) AS 1816.12007 Metallic materialsBrinell hardness testTest method (ISO 6506-1:2005, MOD) AS 1816.22007 Metallic materialsBrinell hardness test Verification and calibration of testing machines AS 1816.32007 Metallic materialsBrinell hardness test Calibration of reference blocks AS 1816.42007 Metallic materialsBrinell hardness testTable of hardness values AS 1817.12003 Metallic materialsVickers hardness testTest methods (ISO 6507-1:1997, MOD) AS 1817.22002 Metallic materialsVickers hardness test Verification of testing machines AS 1817.32002 Metallic materialsVickers hardness test Calibration of reference blocks AS 18552008 Methods for the determination of transverse tensile properties of round steel pipe AS 22912007 Metallic materialsTensile testing at elevated temperatures AS 24032008 Metallic materialsSheet and stripDetermination of plastic strain ratio AS 2505.12004 Metallic materialsSheet, strip and plateBend tests AS 2505.22004 Metallic materialsBars, rods and solid shapes Bend tests AS 2505.32004 Metallic materialsTubular productsBend and related tests AS 2505.42002 Metallic materialsWireReverse bend test AS 2505.52002 Metallic materialsWireSimple torsion test AS 2505.62002 Metallic materialsWireWrapping test AS 50162004 Metallic materialsConversion of hardness values Non-destructive testing of metals AS 10651988 Non-destructive testingUltrasonic testing of carbon and low alloy steel forgings AS 11711998 Non-destructive testingMagnetic particle testing of ferromagnetic products, components and structures AS 17102007 Non-destructive testingUltrasonic testing of carbon and low alloy steel plate and universal sectionsTest methods and quality classification AS 20841987 Non-destructive testingEddy current testing of metal tubes
442
SUBJECT INDEX
AS/NZS 4492.2:2000 WoolFleece testing and measurement Determination of washing yield and clean fleece weight AS/NZS 4492.3:2000 WoolFleece testing and measurement Measurement of mean fibre diameter using Airflow and Sonic A instruments AS/NZS 4492.4:2000 WoolFleece testing and measurement Measurement of mean fibre diameter and determination of fibre diameter distribution using SIROLAN-LASERSCAN measuring system AS/NZS 4492.5:2000 WoolFleece testing and measurement Measurement of mean fibre diameter using the OFDA measuring system AS/NZS 4546:2004 Specification for woven wool packs for greasy wool AS/NZS 4547.0:2004 Methods of testing wool packs for greasy woolIntroduction and list of methods AS/NZS 4547.1:1999 Methods of testing woolpacks for greasy woolFibrillation of woven, HDPE fabric AS/NZS 4547.2:2004 Methods of testing wool packs for greasy woolAdhesion of wool to anti-slip coating AS/NZS 4547.3:2004 Methods of testing wool packs for greasy woolSurface frictional properties of fabric AS/NZS 4547.4:2004 Methods of testing wool packs for greasy woolHandling resistance AS/NZS 4547.5:2004 Methods of testing wool packs for greasy woolStrength of fabric after exposure to ultraviolet radiation AS/NZS 4844.1(Int):2002 WoolMeasurement of fibre properties Measurement of the fibre length after carding of scoured or carbonised wool AS/NZS 4844.2(Int):2002 WoolMeasurement of fibre properties Measurement of the fibre length after carding waste of scoured or carbonised wool Textile fibres in general AS 2001.72005 Methods of test for textilesQuantitative analysis of fibre mixtures (BS4407:1988, MOD) AS/NZS 2450:1994 TextilesNatural and man-made fibresGeneric names THERMAL INSULATION see HEAT RECOVERY. THERMAL INSULATION THERMODYNAMICS AND TEMPERATURE MEASUREMENTS Calorimetry see Heat. Calorimetry Heat. Calorimetry AS 1038.51998 Coal and cokeAnalysis and testingGross calorific value Temperature-measuring instruments AS 10061995 Solid-stem general purpose thermometers AS 13081987 Electric water heatersThermostats and thermal cutouts AS 21901995 Clinical maximum thermometersMercury-in-glass AS 46192004 Gas appliance thermostats AS EN 12470.22004 Clinical thermometersPhase change type (dot matrix) thermometers AS EN 12470.32004 Clinical thermometersPerformance of compact electrical thermometers (non-predictive and predictive) with maximum device AS EN 12470.42004 Clinical thermometersPerformance of electrical thermometers for continuous measurement AS 60044.22007 Instrument transformersInductive voltage transformers(IEC 60044-2:Ed.1.2 (2003) MOD) TINS see CANS. TINS. TUBES TOBACCO, TOBACCO PRODUCTS AND RELATED EQUIPMENT AS 48302007 Determination of the extinction propensity of cigarettes TOWN PLANNING see PHYSICAL PLANNING. TOWN PLANNING TRANSFORMERS. REACTORS AS 10281992 Power reactors and earthing transformers AS 12431982 Voltage transformers for measurement and protection AS 16751986 Current transformersMeasurement and protection AS 2374.1.22003 Power transformers- Minimum Energy Performance Standard (MEPS) requirements for distribution transformers AS 2374.21997 Power transformersTemperature rise AS 2374.3.01982 Power transformersInsulation levels and dielectric testsGeneral requirements AS 2374.3.11992 Power transformersInsulation levels and dielectric testsExternal clearances in air AS 2374.51982 Power transformersAbility to withstand short-circuit AS 2374.61994 Power transformersDetermination of transformer and reactor sound levels
THERMAL INSULATION
AS 2374.71997 Power transformersLoading guide for oil-immersed power transformers AS 2374.82000 Power transformersApplication guide AS 25582006 Transformers for use on single-wire earth-return distribution systems AS 39531996 Loading guide for dry-type power transformers AS/NZS 4763(Int):2006 Safety of Portable Inverters AS/NZS 4879.1:2008 Performance of transformers and electronic step-down convertors for ELV lampsTest methodEnergy performance AS 60044.12007 Instrument transformersCurrent transformers (IEC 60044-1 Ed.1.2 (2003) MOD) AS 60044.22007 Instrument transformersInductive voltage transformers(IEC 60044-2:Ed.1.2 (2003) MOD) AS 60044.32004 Instrument transformersCombined transformers AS 60044.52004 Instrument transformersCapacitor voltage transformers AS 60076.12005 Power transformersGeneral (IEC60076-1, Ed.2.1 (2000) MOD) AS/NZS 60076.3:2008 Power transformersInsulation levels, dielectric tests and external clearances in air (IEC 60076-3, Ed. 2 (2000) MOD) AS 60076.42006 Power transformersGuide to the lightning impulse and switching impulse testingPower transformers and reactors AS 60076.112006 Power transformersDry-type transformers AS 60214.12005 Tap-changersPerformance requirements and test methods AS 60214.22006 Tap-changersApplication guide AS/NZS 61558.1:2008 Safety of Power Transformers, Power Supplies, Reactors and Similar ProductsGeneral requirements and test (IEC 615581 Ed 2, MOD) AS/NZS 61558.1:2000 Safety of power transformers, power supply units and similarGeneral requirements and tests AS/NZS 61558.2.3:2001 Safety of power transformers, power supply units and similar devices- Particular requirements for ignition transformers for gas and oil burners (IEC 61558-2-3:1999, IDT) AS/NZS 61558.2.4:2001 Safety of power transformers, power supply units and similar- Particular requirements for isolating transformers for general use (IEC 61558-2-4:1997, MOD) AS/NZS 61558.2.5:2003 Safety of power transformers, power supply units and similar devicesParticular requirements for shaver transformers (IEC 61558-2-5:1997, MOD) AS/NZS 61558.2.6:2001 Safety of power transformers, power supply units and similar- Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997, MOD) AS/NZS 61558.2.7:2008 Safety of power transformers, power supply units and similarParticular requirements for transformers and power supplies for toys AS/NZS 61558.2.7:2001 Safety of power transformers, power supply units and similar- Particular requirements for transformers for toys (IEC 61558-2-7:1997, MOD) AS/NZS 61558.2.8:2001 Safety of power transformers, power supply units and similar- Particular requirements for bell and chime transformers (IEC 61558-2-8:1998, IDT) AS/NZS 61558.2.9:2003 Safety of power transformers, power supply units and similar devices -- Particular requirements for transformers for class III handlamps for tungsten filament lamps AS/NZS 61558.2.15:2001 Safety of power transformers, power supply units and similar- Particular requirements for isolating transformers for the supply of medical locations (IEC 61558-2-15:1999, MOD) AS/NZS 61558.2.17:2001 Safety of power transformers, power supply units and similar- Particular requirements for transformers for switch mode power supplies (IEC 61558-2-17:1997, MOD) AS/NZS 61558.2.23:2001 Safety of power transformers, power supply units and similar devices- Particular requirements for transformers for construction sites (IEC 61558-2-23:2000, MOD) TRANSPORT Air transport AS 3891.12008 Air navigationCables and their supporting structuresMarking and safety requirementsPermanent marking of overhead cables and their supporting structures for other than planned low-level flying AS 3891.22008 Air navigationCables and their supporting structuresMarking and safety requirementsMarking of overhead cables for planned low-level flying operations Road transport AS 1678.0.0.0012004 Emergency procedure guideTransportVehicle fire AS 1678.2.1.0012003 Emergency procedure guideTransportLiquefied petroleum gas (LP Gas)
443
TRANSPORT
SUBJECT INDEX
AS 2809.32008 Road tank vehicles for dangerous goodsRoad tank vehicles for compressed liquefied gases AS 2809.42001 Road tank vehicles for dangerous goodsTankers for toxic and corrosive cargoes AS 2809.52001 Road tank vehicles for dangerous goodsTankers for bitumen-based products AS 2809.62001 Road tank vehicles for dangerous goodsTankers for cryogenic liquids AS 49822003 Thermal performance of refrigerated transport equipmentSpecification and testing AS ISO 149062005 Road transport and traffic telematics Electronic fee collectionApplication interface definition for dedicated short-range communication CD DANGER2006 Dangerous Goods CD HB 43:2002 Road Safety Audit HB 69.131995 Guide to traffic engineering practicePedestrians HB 69.141999 Guide to traffic engineering practiceBicycles HB 76 (SET 100)2004 Dangerous goodsInitial emergency response guide (100 copies) HB 76 (SET 1000)2004 Dangerous goodsInitial emergency response guide (1000 copies) HB 76 (SET 50)2004 Dangerous goodsInitial emergency response guide (50 copies) HB 76 (SET 500)2004 Dangerous goodsInitial emergency response guide (500 copies) HB 762004 Dangerous goodsInitial emergency response guide Transport by rail AS 1678.0.0.0012004 Emergency procedure guideTransportVehicle fire AS 1678.2.1.0012003 Emergency procedure guideTransportLiquefied petroleum gas (LP Gas) AS 1678.2.1.0052004 Emergency procedure guideTransportEthylene oxide, pure or with nitrogen AS 1678.2.1.0102004 Emergency procedure guideTransportButadienes, inhibited AS 1678.2.2.0002003 Emergency procedure guideTransportOxygen, refrigerated liquid AS 1678.2.2.0021999 Emergency procedure guideTransport Chlorine AS 1678.3.0.0152004 Emergency procedure guideTransportFormaldehyde solution, flammable AS 1678.3.0.0212003 Emergency procedure guideTransportEthyl methyl ketone (Methyl ethyl ketone, MEK) AS 1678.3.0.0222003 Emergency procedure guideTransportAcrylonitrile (inhibited) AS 1678.3.1.0012003 Emergency procedure guideTransportPetrol (as cargo) AS 1678.5.1.0021998 Emergency procedure guideTransportAmmonium nitrate AS 1678.6.0.0011998 Emergency procedure guideTransportAniline AS 1678.6.0.0021998 Emergency procedure guideTransportSodium cyanide, potassium cyanide AS 1678.6.0.0041998 Emergency procedure guideTransportPhenol, cresols and cresylic acid AS 1678.6.0.0061998 Emergency procedure guideTransportToluene diisocyanate (TDI) AS 1678.6.0.0091998 Emergency procedure guideTransportCyanides, inorganic AS 1678.6.0.0101998 Emergency procedure guideTransportPhenylmercuric compounds AS 1678.6.0.0111998 Emergency procedure guideTransportCopper-chrome-arsenic AS 1678.6.0.0131998 Emergency procedure guideTransportChloropicrin AS 1678.6.0.0141998 Emergency procedure guideTransportLead arsenates, lead arsenites AS 1678.6.0.0152004 Emergency procedure guideTransportBeryllium powder and beryllium compound, N.O.S. AS 1678.6.1.0171998 Emergency procedure guideTransportCadmium compound AS 1678.8.0.0012003 Emergency procedure guideTransportHydrochloric acid AS 1678.8.0.0042003 Emergency procedure guideTransportHypochlorite solution
AS 1678.2.1.0052004 Emergency procedure guideTransportEthylene oxide, pure or with nitrogen AS 1678.2.1.0102004 Emergency procedure guideTransportButadienes, inhibited AS 1678.2.2.0002003 Emergency procedure guideTransportOxygen, refrigerated liquid AS 1678.2.2.0021999 Emergency procedure guideTransport Chlorine AS 1678.3.0.0152004 Emergency procedure guideTransportFormaldehyde solution, flammable AS 1678.3.0.0212003 Emergency procedure guideTransportEthyl methyl ketone (Methyl ethyl ketone, MEK) AS 1678.3.0.0222003 Emergency procedure guideTransportAcrylonitrile (inhibited) AS 1678.3.1.0012003 Emergency procedure guideTransportPetrol (as cargo) AS 1678.5.1.0021998 Emergency procedure guideTransportAmmonium nitrate AS 1678.6.0.0011998 Emergency procedure guideTransportAniline AS 1678.6.0.0021998 Emergency procedure guideTransportSodium cyanide, potassium cyanide AS 1678.6.0.0041998 Emergency procedure guideTransportPhenol, cresols and cresylic acid AS 1678.6.0.0061998 Emergency procedure guideTransportToluene diisocyanate (TDI) AS 1678.6.0.0091998 Emergency procedure guideTransportCyanides, inorganic AS 1678.6.0.0101998 Emergency procedure guideTransportPhenylmercuric compounds AS 1678.6.0.0111998 Emergency procedure guideTransportCopper-chrome-arsenic AS 1678.6.0.0131998 Emergency procedure guideTransportChloropicrin AS 1678.6.0.0141998 Emergency procedure guideTransportLead arsenates, lead arsenites AS 1678.6.0.0152004 Emergency procedure guideTransportBeryllium powder and beryllium compound, N.O.S. AS 1678.6.1.0171998 Emergency procedure guideTransportCadmium compound AS 1678.8.0.0012003 Emergency procedure guideTransportHydrochloric acid AS 1678.8.0.0042003 Emergency procedure guideTransportHypochlorite solution AS 1678.8.0.0052004 Emergency procedure guideTransportAcetic anhydride AS 1678.8.0.0081998 Emergency procedure guideTransportHydrofluoric acid AS 1678.8.0.0092003 Emergency procedure guideTransportFormaldehyde solution (with not less than 25% formaldehyde) AS 1678.9.0.0012005 Emergency procedure guideTransportPolymeric beads, expandable AS 1678.10.0011998 Emergency procedure guideTransportPesticides AS 1678.2A12004 Emergency procedure guideTransportGroup text EPG for Class 2 substancesFlammable, compressed gas AS 1678.2C12004 Emergency procedure guideTransportGroup text EPGs for Class 2 substances Non-flammable, compressed gas AS 1678.2D11998 Emergency procedure guideTransportGroup text EPGs for Class 2 substancesCompressed and liquefied gasesAerosols AS 1678.2M12004 Emergency procedure guideTransportGroup text EPGs for Class 2 substancesCompressed and liquefied gasesMixed load of gases in cylinders AS 1678.4A12004 Emergency Producedure GuideTransport Group text EPG for Class 4.1 substancesFlammable solids; substances liable to spontaneous combustion; and substances that in contact with water emit flammable gases AS 1678.8A12004 Emergency procedure guideTransportGroup text EPGs for Class 8 substancesCorrosive substances AS 2809 Set2008 Road tank vehicles for dangerous goods Set AS 2809.12008 Road tank vehicles for dangerous goodsGeneral requirements for all road tank vehicles AS 2809.22008 Road tank vehicles for dangerous goodsRoad tank vehicles for flammable liquids
444
SUBJECT INDEX
AS 1678.8.0.0052004 Emergency procedure guideTransportAcetic anhydride AS 1678.8.0.0081998 Emergency procedure guideTransportHydrofluoric acid AS 1678.8.0.0092003 Emergency procedure guideTransportFormaldehyde solution (with not less than 25% formaldehyde) AS 1678.9.0.0012005 Emergency procedure guideTransportPolymeric beads, expandable AS 1678.10.0011998 Emergency procedure guideTransportPesticides AS 1678.2A12004 Emergency procedure guideTransportGroup text EPG for Class 2 substancesFlammable, compressed gas AS 1678.2C12004 Emergency procedure guideTransportGroup text EPGs for Class 2 substances Non-flammable, compressed gas AS 1678.2D11998 Emergency procedure guideTransportGroup text EPGs for Class 2 substancesCompressed and liquefied gasesAerosols AS 1678.2M12004 Emergency procedure guideTransportGroup text EPGs for Class 2 substancesCompressed and liquefied gasesMixed load of gases in cylinders AS 1678.4A12004 Emergency Producedure GuideTransport Group text EPG for Class 4.1 substancesFlammable solids; substances liable to spontaneous combustion; and substances that in contact with water emit flammable gases AS 1678.8A12004 Emergency procedure guideTransportGroup text EPGs for Class 8 substancesCorrosive substances AS 2809 Set2008 Road tank vehicles for dangerous goods Set AS 2809.12008 Road tank vehicles for dangerous goodsGeneral requirements for all road tank vehicles AS 2809.22008 Road tank vehicles for dangerous goodsRoad tank vehicles for flammable liquids AS 2809.32008 Road tank vehicles for dangerous goodsRoad tank vehicles for compressed liquefied gases AS 2809.42001 Road tank vehicles for dangerous goodsTankers for toxic and corrosive cargoes AS 2809.52001 Road tank vehicles for dangerous goodsTankers for bitumen-based products AS 2809.62001 Road tank vehicles for dangerous goodsTankers for cryogenic liquids CD DANGER2006 Dangerous Goods CD HB 76 (SET 100)2004 Dangerous goodsInitial emergency response guide (100 copies) HB 76 (SET 1000)2004 Dangerous goodsInitial emergency response guide (1000 copies) HB 76 (SET 50)2004 Dangerous goodsInitial emergency response guide (50 copies) HB 76 (SET 500)2004 Dangerous goodsInitial emergency response guide (500 copies) HB 762004 Dangerous goodsInitial emergency response guide TUBES see CANS. TINS. TUBES TYRES Road vehicle tyres AS 19731993 Pneumatic tyresPassenger car, light truck, and truck/busRetreading and repair processes AS/NZS 2230:1999 New pneumatic tyres for light trucks and trucks/buses. UNDERGROUND WORKS see EARTHWORKS. EXCAVATIONS. FOUNDATION CONSTRUCTION. UNDERGROUND WORKS VALVES AS 43102004 DN80 piston type vacuum interface valves for municipal sewer systems AS 46202004 Thermoelectric flame safeguards AS 48832008 Air valves for sewerage ATS 5200.0162005 Technical Specification for plumbing and drainage productsCistern inlet valves Ball and plug valves AS 47962001 Water supplyMetal bodied and plastic bodied ball valves for property service connection ATS 5200.0172005 Technical Specification for plumbing and drainage productsCistern outlet valves ATS 5200.0462005 Technical Specification for plumbing and drainage productsDiversion systemsWash down and first flush ATS 5200.0472005 Technical Specification for plumbing and drainage productsSelf-sealing devices
TUBES
ATS 5200.4682005 Technical Specification for plumbing and drainage productsHot water systemsRecirculation valves ATS 5200.4692005 Technical Specification for plumbing and drainage productsWaterless or limited flush urinalsWith an integral sealing device Check valves AS 46031999 Flashback arrestersSafety devices for use with fuel gases and oxygen or compressed air AS 47942001 Non-return valvesSwing check and tilting disc Other valves AS 19102004 Water supplyFloat control valves for use in hot and cold water AS 2638.12002 Gate valves for waterworks purposesMetal seated AS 2638.11999 Sluice valves for waterworks purposesMetal seated AS 2638.22006 Gate valves for waterworks purposesResilient seated AS 2638.22002 Gate valves for waterworks purposesResilient seated AS 2638.21999 Sluice valves for waterworks purposesResilient seated AS/NZS 2845.1:1998 Water supplyBackflow prevention devices Materials, design and performance requirements AS 2845.21996 Water supplyBackflow prevention devicesAir gaps and break tanks AS 2845.31993 Water supplyBackflow prevention devicesField testing and maintenance AS 39522002 Water supplySpring hydrant valve for waterworks purposes ATS 5200.1012005 Technical Specification for plumbing and drainage productsAppliances (low hazard rating) Pressure regulators AS 13582004 Bursting discs and bursting disc devices Application, selection and installation AS 17321997 Fusible plugs for boilers AS 26132005 Safety devices for gas cylinders AS 3840.11998 Pressure regulators for use with medical gases Pressure regulators and pressure regulators with flow-metering devices AS 42671995 Pressure regulators for use with industrial compressed gas cylinders AS 46172004 Manual shut off gas valves AS 46182004 Gas appliance regulators AS 46212004 Regulators for use with liquefied petroleumVapour phase AS 46292005 Automatic shut off valves and vent valves AS 46302005 Leakage detection systems AS 47062001 Pressure gauges for regulators used with compressed gas cylinders AS 48402001 Low pressure regulators for use in industrial compressed gas reticulation systems AS 4955.12003 Transportable gas cylindersCompatibility of cylinder and valve materials with gas contentsMetallic materials AS 4955.22003 Transportable gas cylindersCompatibility of cylinder and valve materials with gas contentsNon-metallic materials (ISO 11114-2:2000, MOD) AS 4955.32003 Transportable gas cylindersCompatibility of cylinder and valve materials with gas contentsAutogenous ignition test in oxygen atmospheres AG 8051998 Approval requirements for natural gas vehicle (NGV) components (incorporates amendment) Valves in general AS 12712003 Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels AS 1357.12004 Valves primarily for use in heated water systems Protection valves AS 1357.22005 Valves primarily for use in heated water systems Control valves AS 16281999 Water supplyMetallic gate, globe and non-return valves AS 24731990 Valves for compressed gas cylinders (threaded outlet) AS 2473.12006 Valves for compressed gas cylinders Specifications, type testing, and manufacturing tests and inspections
445
SUBJECT INDEX
AS 4180.12008 Measurement of drift loss from cooling towersChloride balance method AS 4180.22008 Measurement of drift loss from cooling towersLost chloride method AS 4211.31996 Gas recovery or combined recovery and recycling equipmentFluorocarbon refrigerants from commercial/domestic refrigeration and airconditioning systems AS 42601997 High efficiency particulate air (HEPA) filtersClassification, construction and performance AS 44291999 Methods of test and rating requirements for smoke-spill fans AS/NZS 4740:2000 Natural ventilatorsClassification and performance AS 4755.3.12008 Demand response capabilities and supporting technologies for electrical productsInteraction of demand response enabling devices and electrical productsOperational instructions and connections for airconditioners AS/NZS 4776.1.1:2008 Liquid-chilling packages using the vapour compression cycleMethod of rating and testing for performanceRating AS/NZS 4776.1.2:2008 Liquid-chilling packages using the vapour compression cycleMethod of rating and testing for performanceTesting AS/NZS 4776.2:2008 Liquid-chilling packages using the vapour compression cycleMinimum energy performance standard (MEPS) and compliance requirements AS/NZS 4965.1:2008 Performance of close control airconditionersTesting for rating AS/NZS 4965.2:2008 Performance of close control airconditionersMinimum energy performance standard (MEPS) requirements AS ISO 58012004 Industrial fansPerformance testing using standardized airways AS/NZS 60335.2.65:2006 Household and similar electrical appliances SafetyParticular requirements for air-cleaning appliances (IEC 60335-265 Ed 3, IDT) AS/NZS 60335.2.68:2003 Household and Similar Electrical Appliances Safety- Particular requirements for spray extraction appliances, for industrial and commercial use AS/NZS 60335.2.80:2004 Household and similar electrical appliances Safety- Particular requirements for fans AS/NZS 60335.2.98:2005 Household and similar electrical appliances Safety- Particular requirements for humidifiers (IEC 60335-2-98 Ed 2.1, IDT) VETERINARY MEDICINE AS/NZS 4261:1994 Reusable containers for the collection of sharp items used in human and animal medical applications AS/NZS 4478:1997 Guide to the reprocessing of reusable containers for the collection of sharp items used in human and animal clinical/medical applications VIBRATION AND SHOCK WITH RESPECT TO HUMAN BEINGS AS 2670.12001 Evaluation of human exposure to whole-body vibration General requirements AS 2670.21990 Evaluation of human exposure to whole-body vibration Continuous and shock-induced vibration in buildings (1 to 80 Hz) AS 2670.42001 Evaluation of human exposure to whole-body vibration Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems AS 27631988 Vibration and shockHand-transmitted vibrationGuidelines for measurement and assessment of human exposure AS 2993.11987 Vibration and shockDynamic characteristics of the human bodyDriving point impedance of the human body VIBRATIONS, SHOCK AND VIBRATION MEASUREMENTS AS 2625.12003 Mechanical vibrationEvaluation of machine vibration by measurements on non-rotating partsGeneral guidelines AS 2625.42003 Mechanical vibrationEvaluation of machine vibration by measurements on non-rotating partsIndustrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ AS 27752004 Mechanical vibration and shockMechanical mounting of accelerometers AS 37621990 Measurement and reporting of local vibration data of ship structures and equipment AS 37631990 Mechanical vibration and shockGuidelines for the overall evaluation of vibration in merchant ships AS 37641990 The measurement and reporting of shipboard vibration data VOCABULARIES (Vocabularies) see Services. Company organization, management and quality. Administration. Transport. Sociology. (Vocabularies) Administration see Services. Company organization, management and quality. Administration. Transport. Sociology. (Vocabularies)
AS 2473.22007 Valves for compressed gas cylindersOutlet connections (threaded) and stem (inlet) threads AS 2473.32007 Valves for compressed gas cylindersOutlet connections for medical gases (including pin-indexed yoke connections) AS 24741990 Valves for compressed gas cylinders (diameterindexed outlets) AS 4032.22005 Water supplyValves for the control of hot water supply temperaturesTempering valves and end-of-line temperature-actuated devices AS 4032.32004 Water supplyValves for the control of hot water supply temperaturesRequirements for field testing, maintenance or replacment of thermostatic mixing valves, tempering valves and end of line temperature control devices AS 47952006 Butterfly valves for waterworks purposes AS 47952002 Double-flanged butterfly valves for waterworks purposes AS 49562008 Air valves for water supply AS 50812008 Hydraulically operated automatic control valves for waterworks purposes ATS 5200.0062005 Technical Specification for plumbing and drainage productsReflux valvesSewerage ATS 5200.0122005 Technical Specification for plumbing and drainage productsIn-line valves for use in plumbing water supply systemsMiscellaneous types metallic and non-metallic ATS 5200.0202004 Technical Specification for plumbing and drainage productsFlushing valves for water closets and urinalsfor use with mains supply ATS 5200.0212004 Technical Specification for plumbing and drainage productsFlushing valves for water closets and urinalsfor use with break tank supply ATS 5200.0302007 Technical Specification for plumbing and drainage productsSolenoid valves ATS 5200.037.12006 Technical Specification for plumbing and drainage productsFlow controllersFor controlling flows in cold or heated water systems AS 5200.037.22008 Plumbing and drainage productsFlow controllers for use with heated or cold water systems ATS 5200.037.22005 Technical Specification for plumbing and drainage productsFlow controllersFor use in heated or cold water plumbing systems ATS 5200.0522005 Technical Specification for plumbing and drainage productsMetallic-bodied inlet pressure control valves greater than DN50 ATS 5200.4202005 Technical Specification for plumbing and drainage productsTrap-priming valves ATS 5200.4532004 Technical Specification for plumbing and drainage productsHeated water systemsThermostatic circulation valve ATS 5200.4672004 Technical Specification for plumbing and drainage productsRainwater tank connection valve AS 64012003 Knife gate valves for waterworks purposes VENTILATORS. FANS. AIR-CONDITIONERS AS 29132000 Evaporative air-conditioning equipment AS/NZS 3350.2.40:2001 Safety of household and similar electrical appliances- Particular requirements for electrical heat pumps, airconditioners and dehumidifiers (IEC 60335-2-40:1995, MOD) AS/NZS 3350.2.80:1998 Safety of household and similar electrical appliancesParticular requirementsElectric fans AS/NZS 3350.2.98:1998 Safety of household and similar electrical appliancesParticular requirementsHumidifiers AS/NZS 3823.1.1:1998 Performance of electrical appliancesAirconditioners and heat pumps- Test MethodsNon-ducted airconditioners and heat pumpsTesting and rating for performance AS/NZS 3823.1.2:2001 Performance of electrical appliancesAirconditioners and heat pumps- Test methodsDucted airconditioners and air-to-air heat pumpsTesting and rating for performance AS/NZS 3823.1.3:2005 Performance of electrical appliancesAirconditioners and heat pumpsWater-source heat pumpsWater-to-air and brine-to air heat pumpsTesting and rating of performance(ISO13256-1, Ed.01 (1998) MOD) AS/NZS 3823.2:2005 Performance of electrical appliancesAirconditioners and heat pumpsEnergy labelling and minimum energy performance standard (MEPS) requirements AS/NZS 3823.3:2002 Performance of electrical appliancesAirconditioners and heat pumpsCalculation of performance for minimum energy performance standard (MEPS) requirements
446
SUBJECT INDEX
Agriculture (Vocabularies) AS SSA 53002007 Australian Fish Names Standard Audio and video engineering (Vocabularies) see Telecommunications. Audio and video engineering (Vocabularies) Chemical technology (Vocabularies) AS 26671983 Chemical testingSamplingGlossary of terms AS ISO 181152006 Surface chemical analysisVocabulary HB 19.301991 Reference materialsGuide 30Terms and definitions used in connection with reference materials Civil engineering (Vocabularies) AS 13482002 Glossary of termsRoads and traffic engineering Company organization, management and quality see Services. Company organization, management and quality. Administration. Transport. Sociology. (Vocabularies) Construction materials and building (Vocabularies) AS/NZS 3500 (Set):2003 Plumbing and drainage Set AS/NZS 3500.0:2003 Plumbing and drainageGlossary of terms AS/NZS 3500.0:1995 National Plumbing and Drainage Code Glossary of terms AS 4145.12008 Locksets and hardware for doors and windows Glossary of terms and rating system AS 4145.42002 LocksetsPadlocks AS 46622003 Ceramic tilesDefinitions, classification, characteristics and marking AS 51052005 Basis for design of structuresNotationsGeneral symbols AS ISO 89302005 General principles on reliability of structures List of equivalent terms HB 231992 TACT, Thesaurus of Australian construction terms HB 502004 Glossary of building terms Documentation (Vocabularies) see Generalities. Terminology. Standardization. Documentation (Vocabularies) Electrical engineering (Vocabularies) AS 1852 (Pt 301, 302, 303)1988 International electrotechnical vocabulary AS/NZS 1852.0:2000 International Electrotechnology Vocabulary Introduction and list of Parts of AS 1852 and IEC 60050 AS 1852.1011978 International electrotechnical vocabulary Mathematics AS 1852.1311988 International electrotechnical vocabulary Electric and magnetic circuits AS 1852.1511988 International electrotechnical vocabulary Electric and magnetic devices AS 1852.3011988 International electrotechnical vocabulary General terms on measurements in electricity AS 1852.3021988 International electrotechnical vocabulary Electrical measuring instruments AS 1852.3031988 International electrotechnical vocabulary Electronic measuring instruments AS 1852.3211988 International electrotechnical vocabulary Instrument transformers AS 1852.3511978 International electrotechnical vocabulary Automatic control AS 1852.3711988 International electrotechnical vocabulary Telecontrol AS 1852.4311981 International electrotechnical vocabulary Transductors AS 1852.4411985 International electrotechnical vocabulary Switchgear, controlgear and fuses AS 1852.4461988 International electrotechnical vocabulary Electrical relays AS 1852.4611988 International electrotechnical vocabulary Electric cables AS 1852.4711988 International electrotechnical vocabulary Insulators AS 1852.5211988 International electrotechnical vocabulary Semiconductor devices and integrated circuits AS 1852.5311975 International electrotechnical vocabulary Electronic tubes AS 1852.5511983 International electrotechnical vocabulary Power electronics AS 1852.5811979 International electrotechnical vocabulary Electromechanical components for electronic equipment AS 1852.6011988 International electrotechnical vocabulary Generation, transmission and distribution of electricityGeneral
VOCABULARIES
AS 1852.6021988 International electrotechnical vocabulary Generation, transmission and distribution of electricity Generation AS 1852.6031988 International electrotechnical vocabulary Generation, transmission and distribution of electricityPower system planning and management AS 1852.6041988 International electrotechnical vocabulary Generation, transmission and distribution of electricity Operation AS 1852.6051988 International electrotechnical vocabulary Generation, transmission and distribution of electricity Substations AS 1852.6911975 International electrotechnical vocabularyTariffs for electricity AS 1852.7011990 International electrotechnical vocabulary Telecommunications, channels and networks AS 1852.7261983 International electrotechnical vocabulary Transmission lines and waveguides AS 1852.8261983 International electrotechnical vocabulary Electrical installations of buildings AS 1852.8411988 International electrotechnical vocabulary Industrial electroheating AS 1852.8451989 International electrotechnical vocabulary Lighting AS 1852.8811988 International electrotechnical vocabulary Radiology and radiological physics Electronics (Vocabularies) AS 1852.5211988 International electrotechnical vocabulary Semiconductor devices and integrated circuits AS 1852.5311975 International electrotechnical vocabulary Electronic tubes AS 1852.5511983 International electrotechnical vocabulary Power electronics AS 1852.5811979 International electrotechnical vocabulary Electromechanical components for electronic equipment Energy and heat transfer engineering (Vocabularies) AS 4591.11999 Internal combustion enginesVocabulary of components and systemsStructure and external covers AS 4591.21999 Internal combustion enginesVocabulary of components and systemsMain running gear AS 4591.31999 Internal combustion enginesVocabulary of components and systemsValves, camshaft drive and actuating mechanisms AS 4591.41999 Internal combustion enginesVocabulary of components and systemsPressure charging and air/exhaust gas ducting systems AS 4591.51999 Internal combustion enginesVocabulary of components and systemsCooling systems AS 4591.61999 Internal combustion enginesVocabulary of components and systemsLubricating systems AS 4591.71999 Internal combustion enginesVocabulary of components and systemsGoverning systems AS 4591.81999 Internal combustion enginesVocabulary of components and systemsStarting systems AS 4591.91999 Internal combustion enginesVocabulary of components and systemsControl and monitoring systems AS 49422001 Pressure equipmentGlossary of terms Environment. Health protection. Safety (Vocabularies) AS 2484.11990 FireGlossary of termsFire tests AS 2484.21991 FireGlossary of termsFire protection and firefighting equipment AS/NZS 3831:1998 Waste managementGlossary of terms AS ISO 140501999 Environmental managementVocabulary Fluid systems and components for general use (Vocabularies) AS 40611992 Fluid power systems and componentsVocabulary MP 611992 Buried pipesGlossary of terms Food technology (Vocabularies) AS 2542.31989 Sensory analysis of foodsGlossary of terms Generalities. Terminology. Standardization. Documentation (Vocabularies) AS/NZS ISO 5127:2004 Information and documentation Vocabulary HB 18.2:2003 Guidelines for third-party certification and accreditationStandardization and related activitiesGeneral vocabulary
447
VOCABULARIES
SUBJECT INDEX
AS/NZS ISO/IEC 15504.5:2006 Information technologyProcess AssessmentAn exemplar Process Assessment Model AS ISO/IEC 19762.12006 Information technologyAutomatic identification and data capture (AIDC) techniquesHarmonized vocabularyGeneral terms relating to AIDC AS ISO/IEC 19762.22006 Information technologyAutomatic identification and data capture (AIDC) techniquesHarmonized vocabularyOptically readable media (ORM) AS ISO/IEC 19762.32006 Information technologyAutomatic identification and data capture (AIDC) techniquesHarmonized vocabularyRadio frequency identification (RFID) MP 621992 OSIVocabulary Manufacturing engineering (Vocabularies) AS 19142002 Vitreous enamel coatingsGlossary of terms AS 28122005 Welding, brazing and cutting of metalsGlossary of terms AS 38771991 Manipulating industrial robotsVocabulary AS 4024.11012006 Safety of machineryTerminologyTerms and definitions AS 4024.14012006 Safety of machineryErgonomic principles Design principlesTerminology and general principles AS 41082005 Metal finishingGlossary of terms in electroplating and related processes AS 47492007 Non-destructive testingTerminology of and abbreviations for fusion weld imperfections as revealed by radiography Materials handling equipment (Vocabularies) AS 17631985 Industrial trucksGlossary of terms AS 1961.12004 Castors and wheelsVocabulary, symbols and multilingual terminology AS 2359.71995 Powered industrial trucksTerminology AS 2359.101995 Powered industrial trucksFork-lift trucksHookon type fork armsVocabulary AS 25491996 Cranes (including hoists and winches)Glossary of terms AS 40351992 Conveyor and elevator beltingGlossary of terms Mechanical systems and components for general use (Vocabularies) AS 20751991 Glossary of terms and notations for gears AS 35281988 Cylindrical screw threadsVocabulary AS 41721994 Rolling bearingsVocabulary Metallurgy (Vocabularies) HB 171996 Metals and alloysStandard terminology and nomenclature Metrology and measurement. Physical phenomena (Vocabularies) AS 2360.01993 Measurement of fluid flow in closed conduits Vocabulary and symbols AS 38071998 Vocabulary of basic and general terms in metrology AS 38821991 RheologyGlossary of terms and classification of properties AS ISO 149782007 Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment Mining and minerals (Vocabularies) AS 24181995 Coal and cokeGlossary of terms Office machines (Vocabularies) see Information technology. Office machines (Vocabularies) Packaging and distribution of goods (Vocabularies) AS 2400.11995 PackagingGlossary of packaging terms AS/NZS 3711.2:1993 Freight containersTerminology Paper technology (Vocabularies) AS 40821992 Recycled paperGlossary of terms Petroleum and related technologies (Vocabularies) AS 46462004 Gas appliance standardsDefinitions and calculations Physical phenomena (Vocabularies) see Metrology and measurement. Physical phenomena (Vocabularies) Road vehicle engineering (Vocabularies) AS 3564.11988 Automotive repairsTerminologyAutomatic transmission AS 3564.21990 Automotive repairsTerminologyManual transmission AS 3564.31990 Automotive repairsTerminologyTransaxle AS 3564.41993 Automotive repairsTerminologyPower steering AS 3564.51993 Automotive repairsTerminologyEngine
Glass and ceramics industries (Vocabularies) AS 27802003 Refractories and refractory materialsGlossary of terms AS/NZS 4668:2000 Glossary of terms used in the glass and glazing industry Health care technology (Vocabularies) AS 36931989 WheelchairsNomenclature, terms and definitions AS 50212005 The language of health concept representation AS ISO 11979.12003 Opthalmic implantsIntraocular lenses Vocabulary AS ISO 11979.22003 Opthalmic implantsIntraocular lenses Optical properties and test methods AS ISO 11979.32003 Opthalmic implantsIntraocular lenses Mechanical properties and test methods AS ISO 11979.42003 Opthalmic implantsIntraocular lenses Labelling and information AS ISO 11979.52003 Opthalmic implantsIntraocular lenses Biocompatibility AS ISO 11979.62003 Opthalmic implantsIntraocular lenses Shelf-life and transport stability AS ISO 11979.72003 Opthalmic implantsIntraocular lenses Clinical investigations AS ISO 11979.82003 Opthalmic implantsIntraocular lenses Fundamental requirements HB 3032007 Guide to the use of abbreviations, acronyms and local terms in health care Health protection see Environment. Health protection. Safety (Vocabularies) Image technology (Vocabularies) AS 24221981 Glossary of micrographics terms Information technology. Office machines (Vocabularies) AS 1189.01991 Data processingVocabularyConsolidated index AS 1189.11991 Data processingVocabularyFundamental terms AS 1189.21982 Data processingVocabularyArithmetic and logic operations AS 1189.31991 Data processingVocabularyEquipment technology AS 1189.41991 Data processingVocabularyOrganization of data AS 1189.51991 Data processingVocabularyRepresentation of data AS 1189.61991 Data processingVocabularyPreparation and handling of data AS 1189.71991 Data processingVocabularyComputer programming AS 1189.81991 Data processingVocabularyControl, integrity and security AS 1189.91985 Data processingVocabularyData communication AS 1189.101982 Data processingVocabularyOperating techniques and facilities AS 1189.111991 Data processingVocabularyProcessing units AS 1189.121991 Data processingVocabularyPeripheral equipment AS 1189.131987 Data processingVocabularyComputer graphics AS 1189.151987 Data processingVocabularyProgramming languages AS 1189.181991 Data processingVocabularyDistributed data processing AS 1189.191991 Data processingVocabularyAnalog computing AS 1189.201991 Data processingVocabularySystem development AS 1189.211987 Data processingVocabularyInterfaces between process computers systems and technical processes AS 1189.221987 Data processingVocabularyCalculators AS 1189.251992 Data processingVocabularyLocal area networks AS 36111993 Glossary of software engineering terminology AS 38781991 Information processingComputer-assisted publishingVocabulary AS 41401995 Metering and utility information exchangeGlossary of terms AS/NZS ISO/IEC 15504.1:2005 Information technologyProcess assessmentConcepts and vocabulary
448
SUBJECT INDEX
AS 3564.61994 Automotive repairsTerminologyConstant velocity joints Rubber and plastics industries (Vocabularies) AS 11791972 Glossary of terms for rubber hose AS 12301993 Pressure-sensitive adhesive tapeGlossary of terms AS 18861991 Glossary of terms relating to plastics AS 1886 Supplement 11994 Glossary of terms relating to plastics Plastics recycling terminology (Supplement to AS 18861991) Safety (Vocabularies) see Environment. Health protection. Safety (Vocabularies) Services. Company organization, management and quality. Administration. Transport. Sociology. (Vocabularies) AS/NZS ISO 8402:1994 Quality management and quality assuranceVocabulary AS ISO/IEC 170002005 Conformity assessmentVocabulary and general principles Sociology see Services. Company organization, management and quality. Administration. Transport. Sociology. (Vocabularies) Standardization see Generalities. Terminology. Standardization. Documentation (Vocabularies) Telecommunications. Audio and video engineering (Vocabularies) AS 1852.3711988 International electrotechnical vocabulary Telecontrol AS 1852.7011990 International electrotechnical vocabulary Telecommunications, channels and networks AS 1852.7261983 International electrotechnical vocabulary Transmission lines and waveguides AS/NZS 61000.1.1:2000 Electromagnetic compatibility (EMC) GeneralApplication and interpretation of fundamental definitions and terms Terminology see Generalities. Terminology. Standardization. Documentation (Vocabularies) Testing (Vocabularies) AS 19291981 Non-destructive testingGlossary of terms Textile and leather technology (Vocabularies) AS 10831971 Glossary of terms for defects in woven and knitted textile piece goods AS 24542007 Textile floor coveringsTerminology AS 37042005 GeosyntheticsGlossary of terms AS 41751994 WoolGlossary of terms relating to the testing of raw wool Transport see Services. Company organization, management and quality. Administration. Transport. Sociology. (Vocabularies) Wood technology (Vocabularies) AS/NZS 1148:2001 TimberNomenclatureAustralian, New Zealand and imported species WAREHOUSING see STORING. WAREHOUSING WASTES Installations and equipment for waste disposal and treatment AS 4123.12008 Mobile waste containersContainers with two wheels and a capacity up to 400 L for lifting devices Dimensions and design AS 4123.22008 Mobile waste containersContainers with four wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or lifting devicesDimensions and design AS 4123.32008 Mobile waste containersContainers with four wheels with a capacity from 770 L to 1300 L with dome lid(s), for trunnion and/or lifting devicesDimensions and design AS 4123.42008 Mobile waste containersContainers with four wheels with a capacity from 750 L to 1700 L with flat lid(s), for wide trunnion or BG and/or wide comb lifting devices Dimensions and design AS 4123.52008 Mobile waste containersPerformance requirements and test methods AS 4123.62006 Mobile waste containersHealth, safety and environment AS 4123.72006 Mobile waste containersColours, markings, and designation requirements AG 1121998 Approval requirements for incinerating toilets Liquid wastes. Sludge AS/NZS 4494:1998 Discharge of commercial and industrial liquid waste to sewerGeneral performance requirements Other standards related to wastes AS 47362006 Biodegradable plasticsBiodegradable plastics suitable for composting and other microbial treatment
WAREHOUSING
AS ISO 148552005 Plastic materialsDetermination of the ultimate aerobic biodegradability and disintegration under controlled composting conditionsMethod by analysis of evolved carbon dioxide AS ISO 169292008 PlasticsDetermination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test (ISO 16929:2002, MOD) Recycling AS 1886 Supplement 11994 Glossary of terms relating to plastics Plastics recycling terminology (Supplement to AS 18861991) AS 4211.31996 Gas recovery or combined recovery and recycling equipmentFluorocarbon refrigerants from commercial/domestic refrigeration and airconditioning systems Sludge see Liquid wastes. Sludge Special wastes AS/NZS 3816:1998 Management of clinical and related wastes AS 49642004 Method for the qualitative identification of asbestos in bulk samples HB 2022000 A management system for clinical and related wastesGuide to application of AS/NZS 38161998, Management of clinical and related wastes Wastes in general AS/NZS 3831:1998 Waste managementGlossary of terms AS 4439.11999 Wastes, sediments and contaminated soils Preparation of leachatesPreliminary assessment AS 4439.21997 Wastes, sediments and contaminated soils Preparation of leachatesZero headspace procedure AS 4439.31997 Wastes, sediments amd contaminated soils Preparation of leachatesBottle leaching procedures WATER QUALITY Drinking water AS/NZS 3497:1998 Drinking water treatment unitsPlumbing requirements AS 3565.32004 Meters for water supplyWater meters with integral dual check valves AS 3565.42007 Meters for water supplyIn-service compliance testing AS 3565.52004 Meters for water supplyWater meters with two integral single check valves AS/NZS 4020:2005 Testing of products for use in contact with drinking water AS/NZS 4348:1995 Water supplyDomestic type water treatment appliancesPerformance requirements ATS 5200.1032004 Technical Specification for plumbing and drainage productsWater treatment systems (other than those specified in AS/NZS3497) AS/NZS 5667.5:1998 Water qualitySamplingGuidance on sampling of drinking water and water used for food and beverage processing Examination of biological properties of water AS 4351.11996 BiodegradabilityOrganic compounds in an aqueous mediumMethod for determining and reporting biodegradability AS 4351.21996 BiodegradabilityOrganic compounds in an aqueous mediumDetermination by analysis of dissolved organic carbon (DOC) AS 4351.31996 BiodegradabilityOrganic compounds in an aqueous mediumDetermination by oxygen demand in a closed respirometer AS 4351.41996 BiodegradabilityOrganic compounds in an aqueous mediumDetermination by analysis of released carbon dioxide AS 4351.51996 BiodegradabilityOrganic compounds in an aqueous mediumDetermination by analysis of biochemical oxygen demand (closed bottle test) AS 4351.61996 BiodegradabilityOrganic compounds in an aqueous mediumGuidance for the determination of biodegradability of poorly soluble organic compounds AS 4351.71996 BiodegradabilityOrganic compounds in an aqueous mediumDetermination by semi-continuous activated sludge method (SCAS) AS 4351.81996 BiodegradabilityOrganic compounds in an aqueous mediumDetermination by static test (Zahn-Wellens method) Examination of water for chemical substances AS 23831986 WatersDetermination of calciumEDTA complexometric titration method
449
SUBJECT INDEX
AS 3550.51990 WatersDetermination of gross alpha and gross beta activities AS 3550.61990 WatersDetermination of filtrable calciumFlame atomic absorption spectrometric method AS 3550.71993 WatersThe construction and use of the Secchi disc AS 36331989 Private swimming poolsWater quality AS 4351.11996 BiodegradabilityOrganic compounds in an aqueous mediumMethod for determining and reporting biodegradability AS 4351.21996 BiodegradabilityOrganic compounds in an aqueous mediumDetermination by analysis of dissolved organic carbon (DOC) AS 4351.31996 BiodegradabilityOrganic compounds in an aqueous mediumDetermination by oxygen demand in a closed respirometer AS 4351.41996 BiodegradabilityOrganic compounds in an aqueous mediumDetermination by analysis of released carbon dioxide AS 4351.51996 BiodegradabilityOrganic compounds in an aqueous mediumDetermination by analysis of biochemical oxygen demand (closed bottle test) AS 4351.61996 BiodegradabilityOrganic compounds in an aqueous mediumGuidance for the determination of biodegradability of poorly soluble organic compounds AS 4351.71996 BiodegradabilityOrganic compounds in an aqueous mediumDetermination by semi-continuous activated sludge method (SCAS) AS 4351.81996 BiodegradabilityOrganic compounds in an aqueous mediumDetermination by static test (Zahn-Wellens method) AS/NZS 5667.1:1998 Water qualitySamplingGuidance on the design of sampling programs, sampling techniques and the preservation and handling of samples AS/NZS 5667.4:1998 Water qualitySamplingGuidance on sampling from lakes, natural and man-made AS/NZS 5667.5:1998 Water qualitySamplingGuidance on sampling of drinking water and water used for food and beverage processing AS/NZS 5667.6:1998 Water qualitySamplingGuidance on sampling of rivers and streams AS/NZS 5667.7:1998 Water qualitySamplingGuidance on sampling of water and steam in boiler plants AS/NZS 5667.8:1998 Water qualitySamplingGuidance on the sampling of wet deposition AS/NZS 5667.9:1998 Water qualitySamplingGuidance on sampling from marine waters AS/NZS 5667.10:1998 Water qualitySamplingGuidance on sampling of waste waters AS/NZS 5667.11:1998 Water qualitySamplingGuidance on sampling of groundwaters AS/NZS 5667.12:1999 Water qualitySamplingGuidance on sampling of bottom sediments WAXES, BITUMINOUS MATERIALS AND OTHER PETROLEUM PRODUCTS AS 11601996 Bituminous emulsions for the construction and maintenance of pavements AS 20081997 Residual bitumen for pavements AS 21571997 Cutback bitumen AS/NZS 2341.0:2002 Methods of testing bitumen and related roadmaking productsGeneral introduction and list of standards AS/NZS 2341.1:1994 Methods of testing bitumen and related roadmaking productsPrecision dataDefinitions AS 2341.21993 Methods of testing bitumen and related roadmaking productsDetermination of dynamic (coefficient of shear) viscosity by flow through a capillary tube AS 2341.31993 Methods of testing bitumen and related roadmaking productsDetermination of kinematic viscosity by flow through a capillary tube AS 2341.41994 Methods of testing bitumen and related roadmaking productsDetermination of dynamic viscosity by rotational viscometer AS/NZS 2341.5:1997 Methods of testing bitumen and related roadmaking productsDetermination of apparent viscosity by 'Shell' sliding plate micro-viscometer AS 2341.61992 Methods of testing bitumen and related roadmaking productsDetermination of density using a hydrometer AS 2341.71993 Methods of testing bitumen and related roadmaking productsDetermination of density using a density bottle
AS 27231984 WatersDetermination of uranium (VI) Spectrophotometric method AS 27691985 WatersDetermination of manganeseFlame atomic absorption spectrometric method AS 28821986 WatersDetermination of chromium (VI) (diphenylcarbazide spectrophotometric method) AS 29761987 WatersDetermination of filtrable magnesium Flame atomic absorbtion spectrometric method AS 35061987 WatersDetermination of filtrable synthetic anionic surfactantsCopper-ethylenediamine flame atomic absorption spectrometric method Examination of water in general AS 3550.11988 Methods for the analysis of watersDetermination of dissolved sulphideSpectrophotometric method AS 3550.21990 WatersDetermination of carbon dioxide Alkalimetric titration method AS 3550.31992 WatersDetermination of alkalinityAcidimetric titration method AS 3550.41990 WatersDetermination of solidsGravimetric method AS 3550.51990 WatersDetermination of gross alpha and gross beta activities AS 3550.61990 WatersDetermination of filtrable calciumFlame atomic absorption spectrometric method AS 3550.71993 WatersThe construction and use of the Secchi disc AS/NZS 5667.1:1998 Water qualitySamplingGuidance on the design of sampling programs, sampling techniques and the preservation and handling of samples AS/NZS 5667.4:1998 Water qualitySamplingGuidance on sampling from lakes, natural and man-made AS/NZS 5667.5:1998 Water qualitySamplingGuidance on sampling of drinking water and water used for food and beverage processing AS/NZS 5667.6:1998 Water qualitySamplingGuidance on sampling of rivers and streams AS/NZS 5667.7:1998 Water qualitySamplingGuidance on sampling of water and steam in boiler plants AS/NZS 5667.8:1998 Water qualitySamplingGuidance on the sampling of wet deposition AS/NZS 5667.9:1998 Water qualitySamplingGuidance on sampling from marine waters AS/NZS 5667.10:1998 Water qualitySamplingGuidance on sampling of waste waters AS/NZS 5667.11:1998 Water qualitySamplingGuidance on sampling of groundwaters AS/NZS 5667.12:1999 Water qualitySamplingGuidance on sampling of bottom sediments Sewage water AS/NZS 1546.1:2008 On-site domestic wastewater treatment units Septic tanks AS/NZS 1546.1:1998 On-site domestic wastewater treatment units Septic tanks AS/NZS 1546.2:2008 On-site domestic wastewater treatment units Waterless composting toilets AS/NZS 1546.2:2001 On-site domestic wastewater treatment units Waterless composting toilets AS/NZS 1546.3:2008 On-site domestic wastewater treatment units Aerated wastewater treatment systems AS/NZS 1546.3:2001 On-site domestic wastewater treatment units Aerated wastewater treatment systems AS/NZS 1547:2000 On-site domestic wastewater management AS/NZS 4494:1998 Discharge of commercial and industrial liquid waste to sewerGeneral performance requirements MP 21938 Report on the standardization of minimum requirements for sewerage by-laws Water for industrial use AS 26681983 Water for use in secondary batteries Water quality in general AS 3550.11988 Methods for the analysis of watersDetermination of dissolved sulphideSpectrophotometric method AS 3550.21990 WatersDetermination of carbon dioxide Alkalimetric titration method AS 3550.31992 WatersDetermination of alkalinityAcidimetric titration method AS 3550.41990 WatersDetermination of solidsGravimetric method
450
SUBJECT INDEX
AS 2341.81992 Methods of testing bitumen and related roadmaking productsDetermination of matter insoluble in toluene AS 2341.91992 Methods of testing bitumen and related roadmaking productsDetermination of water content (Dean and Stark) AS/NZS 2341.10:1994 Methods of testing bitumen and related roadmaking productsDetermination of the effect of heat and air on a moving film of bitumen (rolling thin film oven (RTFO) test) AS 2341.111994 Methods of testing bitumen and related roadmaking productsDetermination of ductility AS 2341.121993 Methods of testing bitumen and related roadmaking productsDetermination of penetration AS/NZS 2341.13:1997 Methods of testing bitumen and related roadmaking productsLong-term exposure to heat and air AS 2341.141992 Methods of testing bitumen and related roadmaking productsDetermination of flashpoint of residual bitumen AS 2341.151994 Methods of testing bitumen and roadmaking products Distillation of cutback bitumen AS 2341.161994 Methods of testing bitumen and related roadmaking productsDetermination of flashpoint of cutback bitumen AS 2341.171992 Methods of testing bitumen and related roadmaking productsDetermination of distillation properties of tar AS 2341.181992 Methods of testing bituminous and related roadmaking productsDetermination of softening point (ring and ball method) AS 2341.191992 Methods of testing bitumen and related roadmaking productsDetermination of matter insoluble in quinoline for tar AS/NZS 2341.20:1998 Methods of testing bitumen and related roadmarking productsDetermination of sieve residue for bituminous materials AS/NZS 2341.21:1995 Methods of testing bitumen and related roadmaking productsSample preparation AS/NZS 2341.22:1996 Methods of testing bitumen and related roadmaking productsDetermination of particle charge AS/NZS 2341.23:2002 Methods of testing bitumen and related roadmaking productsDetermination of residue from evaporation AS/NZS 2341.24:1996 Methods of testing bitumen and related roadmaking productsCalculation of non-aqueous volatiles content (by difference) AS 2341.252002 Methods of testing bitumen and related roadmaking productsDetermination of consistency AS/NZS 2341.26:2002 Methods of testing bitumen and related roadmaking productsDetermination of sieve residue AS/NZS 2341.27:2008 Methods of testing bitumen and related roadmaking productsDetermination of sedimentation AS 2341.282002 Methods of testing bitumen and related roadmaking productsDetermination of stone coating ability and water resistance AS 2341.291996 Methods of testing bitumen and related roadmaking productsDetermination of breaking behaviour by setting time AS/NZS 2341.30:1996 Methods of testing bitumen and related roadmaking productsRecovery of residue from bituminous emulsion AS 2341.311998 Methods of testing bitumen and related roadmarking productsMeasurement of water content of emulsions by automated Karl Fischer titration AS 2341.322008 Methods of testing bitumen and related roadmaking productsDetermination of pH of bituminous emulsions AS 35681999 Oils for reducing the viscosity of residual bitumen for pavements AS 5101.2.22008 Methods for preparation and testing of stabilized materialsSamplingPreparation of stabilized pavement materials AS 5101.3.32008 Methods for preparation and testing of stabilized materialsCement content of cement stabilized materials WELDING, BRAZING AND SOLDERING Brazing and soldering AS 1834.11991 Material for solderingSolder alloys AS 1834.21986 Material for solderingFlux-cored solders AS 2292.11979 Methods for the analysis of soldersDetermination of tin (volumetric method) AS 2292.21987 Methods for the analysis of soldersDetermination of silver, bismuth, cadmium, copper, antimony, iron and zinc Flame atomic absorption spectrometric method Welded joints and welds AS/NZS 1554 Set:2008 Structural steel welding Set AS/NZS 1554.1:2004 Structural steel weldingWelding of steel structures AS/NZS 1554.2:2003 Structural steel weldingStud welding (steel studs to steel) AS/NZS 1554.3:2008 Structural steel weldingWelding of reinforcing steel AS/NZS 1554.4:2004 Structural steel weldingWelding of high strength quenched and tempered steels
AS/NZS 1554.5:2004 Structural steel weldingWelding of steel structures subject to high levels of fatigue loading AS/NZS 1554.6:1994 Structural steel weldingWelding stainless steels for structural purposes AS/NZS 1554.7:2006 Structural steel weldingWelding of sheet steel structures AS/NZS 1665:2004 Welding of aluminium structures AS 21772006 Non-destructive testingRadiography of welded butt joints in metal AS 2205.12003 Methods for destructive testing of welds in metal General requirements for tests AS 2205.2.12003 Methods for destructive testing of welds in metal- Transverse butt tensile tests AS 2205.2.22003 Methods for destructive testing of welds in metal- All-weld-metal tensile test AS 2205.2.32003 Methods for destructive testing of welds in metal- Transverse joggle-butt tensile test AS 2205.3.12003 Methods for destructive testing of welds in metal- Transverse guided bend test AS 2205.3.22003 Methods for destructive testing of welds in metal- Transverse free bend test AS 2205.3.32003 Methods for destructive testing of welds in metal- Longitudinal guided bend test AS 2205.3.42003 Methods for destructive testing of welds in metal- Transverse joggle-butt wrap-around bend test AS 2205.3.52003 Methods for destructive testing of welds in metal- Tongue bend test AS 2205.4.12003 Methods for destructive testing of welds in metal- Nick-break test AS 2205.4.22003 Methods for destructive testing of welds in metal- Fillet break test AS 2205.5.12003 Methods for destructive testing of welds in metal- Macro metallographic test for cross-section examination AS 2205.6.12003 Methods for destructive testing of welds in metal- Weld joint hardness test AS 2205.7.12003 Methods for destructive testing of welds in metal- Charpy V-notch impact fracture toughness test AS 2205.7.22003 Methods for destructive testing of welds in metal- Dropweight fracture toughness test for nil-ductility transition temperature AS 2205.7.32003 Methods for destructive testing of welds in metal- Fracture mechanics toughness tests (Klc, critical CTOD and critical J values) AS 2205.8.12003 Methods for destructive testing of welds in metal- Longitudinal fillet shear test AS 2205.8.22003 Methods for destructive testing of welds in metal- Transverse fillet shear test AS 2205.9.12003 Methods for destructive testing of welds in metal- Hot cracking test AS 2205.10.12003 Methods for destructive testing of welds in metal- Corrosion test for welded austenitic stainless steel AS 22072007 Non-destructive testingUltrasonic testing of fusion welded joints in carbon and low alloy steel AS 22142004 Certification of welding supervisorsStructural steel welding AS 23142006 Radiography of metalsImage quality indicators (IQI) and recommendations for their use AS 35452004 Welding positions AS 47492007 Non-destructive testingTerminology of and abbreviations for fusion weld imperfections as revealed by radiography Welding consumables AS/NZS ISO 544:2005 Welding consumablesTechnical delivery conditions for welding filler materialsType of product, dimensions, tolerances and markings AS/NZS 1167.1:2005 Welding and brazingFiller metalsFiller metal for brazing and braze welding AS/NZS 1167.2:1999 Welding and brazingFiller metalsFiller metal for welding AS 1858.12003 Electrodes and fluxes for submerged-arc welding Carbon steels and carbon-manganese steels AS 1858.21989 Electrodes and fluxes for submerged-arc welding Low and intermediate alloy steels AS/NZS 2576:2005 Welding consumables for build-up and wear resistance AS/NZS 2717.1:1996 WeldingElectrodesGas metal arcFerritic steel electrodes
451
SUBJECT INDEX
AS/NZS 2885.5:2002 Pipelines-Gas and liquid petroleumField pressure testing AS/NZS 3752:2006 Welding and allied processesDetermination of hydrogen content in ferritic steel arc weld metal AS 3853.12006 Health and safety in welding and allied processesSampling of airborne particles and gases in the operators breathing zoneSampling of airborne particles AS 3853.22006 Health and safety in welding and allied processesSampling of airborne particles and gases in the operators breathing zoneSampling of gases AS 48392001 The safe use of portable and mobile oxy-fuel gas systems for welding, cutting, heating and allied processes AS ISO 139162003 WeldingGuide on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature WTIA TN 111998 Commentary on structural steel welding Standard AS/NZS 1554 Welding, brazing and soldering in general AS 1101.32005 Graphical symbols for general engineering Welding and non-destructive examination AS 1674 Set2007 Safety in welding and allied processes Set AS 1674.11997 Safety in welding and allied processesFire precautions AS 1674.22007 Safety in welding and allied processesElectrical AS 17962001 Certification of welders and welding supervisors AS 22142004 Certification of welding supervisorsStructural steel welding AS 28122005 Welding, brazing and cutting of metalsGlossary of terms AS/NZS 2980:2007 Qualification of welders for fusion welding of steels AS/NZS ISO 3834.1:2008 Quality requirements for fusion welding of metallic materialsCriteria for the selection of the appropriate level of quality requirements AS/NZS ISO 3834.2:2008 Quality requirements for fusion welding of metallic materialsComprehensive quality requirements AS/NZS ISO 3834.3:2008 Quality requirements for fusion welding of metallic materialsStandard quality requirements AS/NZS ISO 3834.4:2008 Quality requirements for fusion welding of metallic materialsElementary quality requirements AS/NZS ISO 3834.5:2008 Quality requirements for fusion welding of metallic materialsDocuments with which it is necessary to conform to claim conformity to the quality requirements of AS/NZS ISO 3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4 AS/NZS 3992:1998 Pressure equipmentWelding and brazing qualification MANUFACTURING CD2006 Manufacturing Standards on CD WIND TURBINE ENERGY SYSTEMS AS 61400.2(Int)2006 Wind turbinesDesign requirements for small wind turbines AS 61400.212006 Wind turbinesMeasurement and assessment of power quality characteristics of grid connected wind turbines WOOD TECHNOLOGY PROCESSES AS/NZS 2843.1:2006 Timber preservation plantsTimber preservation plant site design AS/NZS 2843.2:2006 Timber preservation plantsTreatment area operation AS 43732007 Pruning of amenity trees AS 47082007 Forest managementEconomic, social, environmental and cultural criteria and requirements for wood production (known as The Australian Forestry Standard) AS 4708 Supplement 12007 The Australian Forestry StandardGuidance for medium and large native forest ownerships (Supplement 1 to AS 47082007) AS 4708 Supplement 22007 The Australian Forestry StandardGuidance for medium and large plantation forest ownerships (Supplement 2 to AS 47082007) AS 4708 Supplement 32007 The Australian Forestry StandardGuidance for small native forest and plantation ownerships (Supplement 3 to AS 47082007) WOOD, SAWLOGS AND SAWN TIMBER AS/NZS 1080.1:1997 TimberMethods of testMoisture content AS/NZS 1080.2:2006 TimberMethods of testSlope of grain AS/NZS 1080.3:2000 TimberMethods of testDensity AS/NZS 1148:2001 TimberNomenclatureAustralian, New Zealand and imported species
AS/NZS 4854:2006 Welding consumablesCovered electrodes for manual metal arc welding of stainless and heat-resisting steels Classification AS/NZS 4855:2007 Welding consumablesCovered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification AS/NZS 4856:2006 Welding consumablesCovered electrodes for manual metal arc welding of creep-resisting steels Classification AS/NZS 4857:2006 Welding consumablesCovered electrodes for manual metal arc welding of high-strength steelsClassification AS 48822003 Shielding gases for welding AS/NZS ISO 14343:2006 Welding consumablesWire electrodes, wires and rods for arc welding of stainless and heat-resisting steelsClassification AS/NZS ISO 14344:2005 Welding and allied processesFlux and gas shielded electrical welding processesProcurement guidelines for consumables AS/NZS ISO 17632:2006 Welding consumablesTubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steelsClassification (ISO 17632:2004, MOD) AS/NZS ISO 17633:2006 Welding consumablesTubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels Classification (ISO 17633:2004, MOD) AS/NZS ISO 17634:2006 Welding consumablesTubular cored electrodes for gas shielded metal arc welding of creep-resisting steelsClassification (ISO 17634:2004, MOD) AS/NZS ISO 18273:2006 Welding consumablesWire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification AS/NZS ISO 18276:2006 Welding consumablesTubular cored electrodes for gas shielded and non-gas shielded metal arc welding of high-strength steelsClassification (ISO 18276:2005, MOD) AS 60974.12006 Arc welding equipmentWelding power sources (IEC 60974-1:2000, MOD) AS 60974.62006 Arc welding equipmentLimited duty portable arc welding and allied process power sources (IEC 60974-6:2003, MOD) AS 60974.112005 Arc welding equipmentElectrode holders Welding equipment AS/NZS 1995:2003 Welding cables AS 27991992 Resistance welding equipmentSingle-phase a.c. transformer type AS/NZS 3957:2006 Light-transmitting screens and curtains for welding operations AS 60974.12006 Arc welding equipmentWelding power sources (IEC 60974-1:2000, MOD) AS 60974.62006 Arc welding equipmentLimited duty portable arc welding and allied process power sources (IEC 60974-6:2003, MOD) AS 60974.112005 Arc welding equipmentElectrode holders Welding processes AS 1085.202006 Railway track materialWelding of steel rail AS/NZS 1554 Set:2008 Structural steel welding Set AS/NZS 1554.1:2004 Structural steel weldingWelding of steel structures AS/NZS 1554.2:2003 Structural steel weldingStud welding (steel studs to steel) AS/NZS 1554.3:2008 Structural steel weldingWelding of reinforcing steel AS/NZS 1554.4:2004 Structural steel weldingWelding of high strength quenched and tempered steels AS/NZS 1554.5:2004 Structural steel weldingWelding of steel structures subject to high levels of fatigue loading AS/NZS 1554.6:1994 Structural steel weldingWelding stainless steels for structural purposes AS/NZS 1554.7:2006 Structural steel weldingWelding of sheet steel structures AS/NZS 1665:2004 Welding of aluminium structures AS 1988.12006 Welding of ferrous castingsSteel castings AS 22142004 Certification of welding supervisorsStructural steel welding AS 2885.22007 PipelinesGas and liquid petroleumWelding
452
SUBJECT INDEX
AS 1157.51998 Methods of testing materials for resistance to fungal growthResistance of timber to surface fungal growth AS/NZS 1328.1:1998 Glued laminated structural timberPerformance requirements and minimum production requirements AS/NZS 1328.2:1998 Glued laminated structural timberGuidelines for AS/NZS 1328: Part 1 for the selection, production and installation of glued laminated structural timber AS 15771993 Scaffold planks AS 1604.12005 Specification for preservative treatmentSawn and round timber AS/NZS 1604.2:2004 Specification for preservative treatmentReconstituted wood-based products AS/NZS 1604.3:2004 Specification for preservative treatmentPlywood AS/NZS 1604.4:2004 Specification for preservative treatmentLaminated veneer lumber (LVL) AS/NZS 1604.5:2005 Specification for preservative treatmentGlued laminated timber products AS/NZS 1605.1:2006 Methods for sampling and analysing timber preservatives and preservative-treated timberGeneral requirements, sampling, and determination of sapwood and heartwood presence AS/NZS 1605.2:2006 Methods for sampling and analysing timber preservatives and preservative-treated timberDetermination of preservative penetration by spot tests AS/NZS 1605.3:2006 Methods for sampling and analysing timber preservatives and preservative-treated timberAnalysis methods for determination of preservative retention AS/NZS 1605.4:2006 Methods for sampling and analysing timber preservatives and preservative-treated timberAnalysis methods for determination of preservative solution concentration AS 16132005 TimberColours for marking F-grades AS 1684.11999 Residential timber-framed constructionDesign criteria AS 1684.2 N1/N2 Supplement 12006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 1: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade F5 (Supplement to AS 1684.22006) AS 1684.2 N1/N2 Supplement 22006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 2: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade F7 (Supplement to AS 1684.22006) AS 1684.2 N1/N2 Supplement 32006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 3: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade F8 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 42006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 4: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade MGP10 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 52006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 5: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade MGP12 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 62006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 6: Timber framing span tablesWind classification N1/N2Seasoned softwoodStress Grade MGP15 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 72006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 7: Timber framing span tablesWind classification N1/N2WA seasoned hardwoodStress Grade F14 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 82006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 8: Timber framing span tablesWind classification N1/N2Seasoned hardwoodStress Grade F17 (Supplement to AS 1684.22006) AS 1684.2 N1/N2 Supplement 92006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 9: Timber framing span tablesWind classification N1/N2Seasoned hardwoodStress Grade F27 (Supplement to AS 1684.22006) AS 1684.2 N1/N2 Supplement 102006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 10: Timber framing span tablesWind classification N1/N2Unseasoned softwoodStress Grade F5 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 112006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 11: Timber framing span tablesWind classification N1/N2Unseasoned softwoodStress Grade F7 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 122006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 12: Timber framing span tablesWind classification N1/N2Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.22006)
AS 1684.2 N1/N2 Supplement 132006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 13: Timber framing span tablesWind classification N1/N2Unseasoned hardwoodStress Grade F11 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 142006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 14: Timber framing span tablesWind classification N1/N2Unseasoned hardwoodStress Grade F14 (Supplement to AS1684.22006) AS 1684.2 N1/N2 Supplement 152006 Residential timber-framed constructionNon-cyclonic areasN1/N2 Supplement 15: Timber framing span tablesWind classification N1/N2Unseasoned hardwoodStress Grade F17 (Supplement to AS1684.22006) AS 1684.2 N3 Supplement 12006 Residential timber-framed construction Non-cyclonic areasN3 Supplement 1: Timber framing span tables Wind classification N3Seasoned softwoodStress Grade F5 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 22006 Residential timber-framed construction Non-cyclonic areasN3 Supplement 2: Timber framing span tables Wind classification N3Seasoned softwoodStress Grade F7 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 42006 Residential timber-framed construction Non-cyclonic areasN3 Supplement 4: Timber framing span tables Wind classification N3Seasoned softwoodStress Grade MGP10 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 102006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 10: Timber framing span tablesWind classification N3Unseasoned softwoodStress Grade F5 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 122006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 12: Timber framing span tablesWind classification N3Unseasoned hardwoodStress Grade F8 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 132006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 13: Timber framing span tablesWind classification N3Unseasoned hardwoodStress Grade F11 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 142006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 14: Timber framing span tablesWind classification N3Unseasoned hardwoodStress Grade F14 (Supplement to AS 1684.22006) AS 1684.2 N3 Supplement 152006 Residential timber-framed constructionNon-cyclonic areasN3 Supplement 15: Timber framing span tablesWind classification N3Unseasoned hardwoodStress Grade F17 (Supplement to AS 1684.22006) AS 1684.32006 Residential timber-framed constructionCyclonic areas AS 1684.3 Supplement 02006 Residential timber-framed construction Cyclonic areasGeneral introduction and index (Supplement to AS 1684.32006) AS 1684.3 C1 Supplement 12006 Residential timber-framed construction Cyclonic areasC1 Supplement 1: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade F5 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 52006 Residential timber-framed construction Cyclonic areasC1 Supplement 5: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade MGP12 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 62006 Residential timber-framed construction Cyclonic areasC1 Supplement 6: Timber framing span tablesWind classification C1Seasoned softwoodStress Grade MGP15 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 72006 Residential timber-framed construction Cyclonic areasC1 Supplement 7: Timber framing span tablesWind classification C1WA seasoned hardwoodStress Grade F14 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 82006 Residential timber-framed construction Cyclonic areasC1 Supplement 8: Timber framing span tablesWind classification C1Seasoned hardwoodStress Grade F17(Supplement to AS1684.32006) AS 1684.3 C1 Supplement 92006 Residential timber-framed construction Cyclonic areasC1 Supplement 9: Timber framing span tablesWind classification C1Seasoned hardwoodStress Grade F27(Supplement to AS1684.32006) AS 1684.3 C1 Supplement 102006 Residential timber-framed constructionCyclonic areasC1 Supplement 10: Timber framing span tables Wind classification C1Unseasoned softwoodStress Grade F5 (Supplement to AS1684.32006) AS 1684.3 C1 Supplement 112006 Residential timber-framed constructionCyclonic areasC1 Supplement 11: Timber framing span tables Wind classification C1Unseasoned softwoodStress Grade F7 (Supplement to AS1684.32006)
453
SUBJECT INDEX
AS 1684.3 C3 Supplement 62006 Residential timber-framed construction Cyclonic areasC3 Supplement 6: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade MGP15 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 72006 Residential timber-framed construction Cyclonic areasC3 Supplement 7: Timber framing span tablesWind classification C3WA seasoned hardwoodStress Grade F14 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 82006 Residential timber-framed construction Cyclonic areasC3 Supplement 8: Timber framing span tablesWind classification C3Seasoned hardwoodStress Grade F17 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 92006 Residential timber-framed construction Cyclonic areasC3 Supplement 9: Timber framing span tablesWind classification C3Seasoned hardwoodStress Grade F27 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 102006 Residential timber-framed constructionCyclonic areasC3 Supplement 10: Timber framing span tables Wind classification C3Unseasoned softwoodStress Grade F5(Supplement to AS1684.32006) AS 1684.3 C3 Supplement 112006 Residential timber-framed constructionCyclonic areasC3 Supplement 11: Timber framing span tables Wind classification C3Unseasoned softwoodStress Grade F7 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 122006 Residential timber-framed constructionCyclonic areasC3 Supplement 12: Timber framing span tables Wind classification C3Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 132006 Residential timber-framed constructionCyclonic areasC3 Supplement 13: Timber framing span tables Wind classification C3Unseasoned hardwoodStress Grade F11 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 142006 Residential timber-framed constructionCyclonic areasC3 Supplement 14: Timber framing span tables Wind classification C3Unseasoned hardwoodStress Grade F14 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 152006 Residential timber-framed constructionCyclonic areasC3 Supplement 15: Timber framing span tables Wind classification C3Unseasoned hardwoodStress Grade F17 (Supplement to AS1684.32006) AS 1684.42006 Residential timber-framed constructionSimplifiedNoncyclonic areas AS/NZS 1748:2006 TimberMechanically stress-graded for structural purposes AS 20822007 TimberHardwoodVisually stress-graded for structural purposes AS 22091994 TimberPoles for overhead lines AS 2796.11999 TimberHardwoodSawn and milled productsProduct specification AS 2796.22006 TimberHardwoodSawn and milled productsGrade description AS 2796.31999 TimberHardwoodSawn and milled productsTimber for furniture components AS 28582008 TimberSoftwoodVisually stress-graded for structural purposes AS/NZS 2878:2000 TimberClassification into strength groups AS 35192005 TimberMachine proof grading AS 3818.12003 TimberHeavy structural productsVisually graded General requirements AS 3818.22004 TimberHeavy structural productsVisually graded Railway track timbers AS 3818.32001 TimberHeavy structural productsVisually gradedPiles AS 3818.42003 TimberHeavy structural productsVisually gradedCrossarms for overhead lines AS 3818.52003 TimberHeavy structural productsVisually gradedMine lift guides AS 3818.62003 TimberHeavy structural productsVisually graded Decking for wharves and bridges AS 3818.72006 TimberHeavy structural productsVisually gradedLarge cross-section sawn hardwood engineering timbers AS 3818.82005 TimberHeavy structural productsVisually graded Stumps and sole plates AS/NZS 4063:1992 TimberStress-gradedIn-grade strength and stiffness evaluation AS/NZS 4357.0:2005 Structural laminated veneer lumberSpecifications AS/NZS 4357.2:2006 Structural laminated veneer lumber (LVL) Determination of structural propertiesTest methods
AS 1684.3 C1 Supplement 122006 Residential timber-framed constructionCyclonic areasC1 Supplement 12: Timber framing span tables Wind classification C1Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 12006 Residential timber-framed construction Cyclonic areasC2 Supplement 1: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade F5 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 22006 Residential timber-framed construction Cyclonic areasC2 Supplement 2: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade F7 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 32006 Residential timber-framed construction Cyclonic areasC2 Supplement 3: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade F8 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 52006 Residential timber-framed construction Cyclonic areasC2 Supplement 5: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade MGP12 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 62006 Residential timber-framed construction Cyclonic areasC2 Supplement 6: Timber framing span tablesWind classification C2Seasoned softwoodStress Grade MGP15 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 72006 Residential timber-framed construction Cyclonic areasC2 Supplement 7: Timber framing span tablesWind classification C2WA seasoned hardwoodStress Grade F14 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 82006 Residential timber-framed construction Cyclonic areasC2 Supplement 8: Timber framing span tablesWind classification C2Seasoned hardwoodStress Grade F17 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 92006 Residential timber-framed construction Cyclonic areasC2 Supplement 9: Timber framing span tablesWind classification C2Seasoned hardwoodStress Grade F27 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 102006 Residential timber-framed constructionCyclonic areasC2 Supplement 10: Timber framing span tables Wind classification C2Unseasoned softwoodStress Grade F5 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 112006 Residential timber-framed constructionCyclonic areasC2 Supplement 11: Timber framing span tables Wind classification C2Unseasoned softwoodStress Grade F7 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 122006 Residential timber-framed constructionCyclonic areasC2 Supplement 12: Timber framing span tables Wind classification C2Unseasoned hardwoodStress Grade F8 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 132006 Residential timber-framed constructionCyclonic areasC2 Supplement 13: Timber framing span tables Wind classification C2Unseasoned hardwoodStress Grade F11 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 142006 Residential timber-framed constructionCyclonic areasC2 Supplement 14: Timber framing span tables Wind classification C2Unseasoned hardwoodStress Grade F14 (Supplement to AS1684.32006) AS 1684.3 C2 Supplement 152006 Residential timber-framed constructionCyclonic areasC2 Supplement 15: Timber framing span tables Wind classification C2Unseasoned hardwoodStress Grade F17 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 12006 Residential timber-framed construction Cyclonic areasC3 Supplement 1: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade F5 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 22006 Residential timber-framed construction Cyclonic areasC3 Supplement 2: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade F7 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 32006 Residential timber-framed construction Cyclonic areasC3 Supplement 3: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade F8(Supplement to AS1684.32006) AS 1684.3 C3 Supplement 42006 Residential timber-framed construction Cyclonic areasC3 Supplement 4: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade MGP10 (Supplement to AS1684.32006) AS 1684.3 C3 Supplement 52006 Residential timber-framed construction Cyclonic areasC3 Supplement 5: Timber framing span tablesWind classification C3Seasoned softwoodStress Grade MGP12 (Supplement to AS1684.32006)
454
SUBJECT INDEX
AS/NZS 4357.3:2006 Structural laminated veneer lumber (LVL) Determination of structural propertiesEvaluation methods AS 44461999 Manufacture of nailplate-joined timber products AS/NZS 4490:1997 TimberStress-gradedProcedures for monitoring structural properties AS/NZS 4491:1997 TimberGlossary of terms in timber related Standards AS 4785.12002 TimberSoftwoodSawn and milled productsProduct specification AS 4785.22002 TimberSoftwoodSawn and milled productsGrade description AS 4785.32002 TimberSoftwoodSawn and milled productsTimber for furniture components AS/NZS 4787:2001 TimberAssessment of drying quality AS 50682006 TimberFinger joints in structural productsProduction requirements AS 50692006 TimberFinger joints in non-structural productsProduction requirements AS 56042005 TimberNatural durability ratings AS 56052007 Guide to the safe use of preservative-treated timber AS 5605 Supplement 12007 Guide to the safe use of preservative-treated timberConsumer safety information sheetCopper chromium arsenic(CCA)-treated timber AS 5605 Supplement 22007 Guide to the safe use of preservative-treated timberConsumer Safety Information SheetAlkaline copper quaternary(ACQ)-treated timber AS 5605 Supplement 32007 Guide to the safe use of preservative-treated timberConsumer Safety Information SheetCopper azole-treated timber AS 5605 Supplement 42007 Guide to the safe use of preservative-treated timberConsumer Safety Information Sheet Light oil/organic solventborne preservative (LOSP)-treated timber AS 5605 Supplement 52007 Guide to the safe use of preservative-treated timberConsumer Safety Information SheetCreosote or pigmentemulsified creosote (PEC)-treated timber AS 5605 Supplement 62007 Guide to the safe use of preservative-treated timberConsumer Safety Information SheetBifenthrin-treated timber HB 1642002 Wood and wood preservationA complete guide to the AS/NZS 1604 Standards Series WOOD-BASED PANELS HB 1642002 Wood and wood preservationA complete guide to the AS/NZS 1604 Standards Series Fibre and particle boards AS/NZS 1859.1:2004 Reconstituted wood-based panels SpecificationsParticleboard AS/NZS 1859.1(Int):2001 Reconstituted wood-based panels SpecificationsParticleboard AS/NZS 1859.2:2004 Reconstituted wood-based panels SpecificationsDry-processed fibreboard AS/NZS 1859.2(Int):2001 Reconstituted wood-based panels SpecificationsDry-processed fibreboard AS/NZS 1859.3:2005 Reconstituted wood-based panels SpecificationsDecorative overlaid wood panels AS/NZS 1859.4:2004 Reconstituted wood-based panels SpecificationsWet-processed fibreboard AS/NZS 1859.4(Int):2001 Reconstituted wood-based panels SpecificationsWet-processed fibreboard AS 18601998 Installation of particleboard flooring AS/NZS 1860.1:2002 Particleboard flooringSpecifications AS 1860.22006 Particleboard flooringInstallation Other wood-based panels AS/NZS 4357.0:2005 Structural laminated veneer lumber Specifications Plywood AS/NZS 2097:2006 Methods for sampling veneer and plywood AS/NZS 2098.0:2006 Methods of test for veneer and plywood General introduction and list of methods AS/NZS 2098.1:2006 Methods of test for veneer and plywood Moisture content of veneer and plywood AS/NZS 2098.2:2006 Methods of test for veneer and plywood Bond quality of plywood (chisel test) AS/NZS 2098.3:2006 Methods of test for veneer and plywood Bond quality and strength of scarf joints in plywood AS/NZS 2098.4:2006 Methods of test for veneer and plywood Measurement of dimensions and shape for sheets of veneer and plywood AS/NZS 2098.5:2006 Methods of test for veneer and plywood Resistance of gluelines in plywood to attack by micro-organisms
WOOD-BASED PANELS
AS/NZS 2098.6:2006 Methods of test for veneer and plywood Depth of peeler checks in veneer and plywood AS/NZS 2098.7:2006 Methods of test for veneer and plywood Density of veneer and plywood AS/NZS 2098.8:2006 Methods of test for veneer and plywood Water absorption and thickness swelling of unpainted plywood AS/NZS 2098.11:2005 Methods of test for veneer and plywood Determination of formaldehyde emissions for plywood AS/NZS 2269:2004 PlywoodStructural AS/NZS 2269:1994 PlywoodStructural AS/NZS 2269.0:2008 PlywoodStructuralSpecifications AS/NZS 2269.1:2008 PlywoodStructuralDetermination of structural propertiesTest methods AS/NZS 2269.2:2007 PlywoodStructuralDetermination of structural propertiesEvaluation methods AS/NZS 2270:2006 Plywood and blockboard for interior use AS/NZS 2271:2004 Plywood and blockboard for exterior use AS/NZS 2271:1999 Plywood and blockboard for exterior use AS/NZS 2272:2006 PlywoodMarine AS/NZS 4357.1:2005 Structural laminated veneer lumberMethod of test for measurement of dimensions and shape AS/NZS 4357.4:2005 Structural laminated veneer lumber Determination of formaldehyde emissions AS 66692007 PlywoodFormwork Wood-based panels in general AS/NZS 4266.0:2004 Reconstituted wood-based panelsMethods of testGeneral introduction and list of methods AS/NZS 4266.0(Int):2001 Reconstituted wood-based panels Methods of testGeneral introduction and list of methods AS/NZS 4266.1:2004 Reconstituted wood-based panelsMethods of testSampling, cutting, and conditioning of test pieces AS/NZS 4266.1(Int):2001 Reconstituted wood-based panels Methods of testSampling and cutting of test pieces AS/NZS 4266.2:2004 Reconstituted wood-based panelsMethods of testDimensions, squareness, flatness and edge straightness of whole panel AS/NZS 4266.2(Int):2001 Reconstituted wood-based panels Methods of testDimensions, squareness, flatness and edge straightness AS/NZS 4266.3:2004 Reconstituted wood-based panelsMethods of testMoisture content AS/NZS 4266.3(Int):2001 Reconstituted wood-based panels Methods of testMoisture content AS/NZS 4266.4:2004 Reconstituted wood-based panelsMethods of testDensity AS/NZS 4266.4(Int):2001 Reconstituted wood-based panels Methods of testDensity AS/NZS 4266.5:2004 Reconstituted wood-based panelsMethods of testModulus of elasticity in bending and bending strength AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels Methods of testModulus of elasticity in bending and bending strength AS/NZS 4266.6:2004 Reconstituted wood-based panelsMethods of testTensile strength perpendicular to the plane of the panel (internal bond strength) AS/NZS 4266.6(Int):2001 Reconstituted wood-based panels Methods of testTensile strength perpendicular to the plane of the panel (Internal bond strength) AS/NZS 4266.7:2004 Reconstituted wood-based panelsMethods of testSurface soundness AS/NZS 4266.7(Int):2001 Reconstituted wood-based panels Methods of testSurface soundness AS/NZS 4266.8:2004 Reconstituted wood-based panelsMethods of testSwelling in thickness after immersion in water AS/NZS 4266.8(Int):2001 Reconstituted wood-based panels Methods of testSwelling in thickness after immersion in water AS/NZS 4266.9:2003 Reconstituted wood-based panelsMethods of testThickness stability and glue bond quality AS/NZS 4266.10:2004 Reconstituted wood-based panelsMethods of testWet bending strength after immersion in water at 70C or boiling temperature AS/NZS 4266.10(Int):2001 Reconstituted wood-based panels Methods of testWet bending strength after immersion in water at 70C or boiling temperature AS/NZS 4266.11:2004 Reconstituted wood-based panelsMethods of testMoisture resistance under cyclic test conditions
455
WOODWORKING EQUIPMENT
SUBJECT INDEX
AS/NZS 4266.28:2004 Reconstituted wood-based panelsMethods of testBond strength of PVC films AS/NZS 4266.29:2004 Reconstituted wood-based panelsMethods of testHeat resistance of PVC films AS/NZS 4266.30:2004 Reconstituted wood-based panelsMethods of testMoisture resistance of finished foils AS/NZS 4266.31:2004 Reconstituted wood-based panelsMethods of testAdhesion of paper foils by the crosscut test AS/NZS 4266.32:2004 Reconstituted wood-based panelsMethods of testVeneer bond strength AS/NZS 4266.33:2004 Reconstituted wood-based panelsMethods of testVeneer bond durability AS/NZS 4266.34:2004 Reconstituted wood-based panelsMethods of testSurface absorption AS/NZS 4266.34(Int):2001 Reconstituted wood-based panels Methods of testSurface absorption AS/NZS 4266.35:2004 Reconstituted wood-based panelsMethods of testDimensions of test pieces AS/NZS 4266.35(Int):2001 Reconstituted wood-based panels Methods of testDimensions of test pieces WOODWORKING EQUIPMENT Woodworking equipment in general AS 14731991 Guarding and safe use of woodworking machinery AS 1473.12000 Woodprocessing machineryPrimary timber milling machinery AS 1473.22001 Woodprocessing machinerySafetyFinishing machineryCommon requirements AS 1473.32001 Wood processing machinerySafetyFinishing machineryCircular sawing machines AS 1473.42001 Wood processing machinerySafetyFinishing machineryBandsawing machines AS 1473.52001 Wood processing machinerySafetyFinishing machineryMoulding machines and routers with rotating tool AS 1473.62005 Wood processing machinerySafetyFinishing machinerySurface planing and thicknessing machines AS 1473.72005 Wood processing machinerySafetyFinishing machineryTenoning, profiling and edge-banding machines AS 1473.82007 Wood processing machinerySafetyFinishing machineryMilling tools and circular saw blades
AS/NZS 4266.11(Int):2001 Reconstituted wood-based panels Methods of testMoisture resistance under cyclic test conditions AS/NZS 4266.12:2003 Reconstituted wood-based panelsMethods of testSurface water absorption AS/NZS 4266.13:2004 Reconstituted wood-based panelsMethods of testResistance to axial withdrawal of screws AS/NZS 4266.13(Int):2001 Reconstituted wood-based panels Methods of testResistance to axial withdrawal of screws AS/NZS 4266.14:2004 Reconstituted wood-based panelsMethods of testDimensional changes associated with changes in relative humidity AS/NZS 4266.14(Int):2001 Reconstituted wood-based panels Methods of testDimensional changes associated with changes in relative humidity AS/NZS 4266.16:2004 Reconstituted wood-based panelsMethods of testFormaldehyde emissionDesiccator method AS/NZS 4266.16(Int):2001 Reconstituted wood-based panels Methods of testFormaldehyde emissionDesiccator method AS/NZS 4266.18:1995 Reconstituted wood-based panelsMethods of testDetermination of efficacy of fungicide treatment AS/NZS 4266.19:2004 Reconstituted wood-based panelsMethods of testAssessing appearance of melamine overlaid panels AS/NZS 4266.20:2004 Reconstituted wood-based panelsMethods of testResistance to surface abrasion (Taber abrasion test) AS/NZS 4266.21:2004 Reconstituted wood-based panelsMethods of testOver-cure or under-cure of resin AS/NZS 4266.22:2004 Reconstituted wood-based panelsMethods of testPorosity of laminated surface AS/NZS 4266.23:2004 Reconstituted wood-based panelsMethods of testResistance to steam AS/NZS 4266.24:2004 Reconstituted wood-based panelsMethods of testResistance to cracking AS/NZS 4266.25:2004 Reconstituted wood-based panelsMethods of testResistance to staining AS/NZS 4266.26:2004 Reconstituted wood-based panelsMethods of testResistance to dry heat AS/NZS 4266.27:2004 Reconstituted wood-based panelsMethods of testResistance to impact
456
WEBSHOP http://infostore.saiglobal.com
CUSTOMER SERVICE Phone: Fax: Email: Mail: 131 242 1300 65 49 49 sales@saiglobal.com GPO Box 5420 Sydney NSW 2001 From overseas: From overseas: +61 2 8206 6010 +61 2 8206 6020
SHOPS AT NEW SOUTH WALES Unit T 10-16 South Street Rydalmere NSW 2116 VICTORIA 224226 Normanby Road Southbank VIC 3006