Documentos de Académico
Documentos de Profesional
Documentos de Cultura
ABSTRACT
The Automatic gear changer system is used to change the gear in a tensionless manner. In this system a fuel power is not required to change the gear. So, that the human energy will not be wasted. The system consists of a battery electronics control board, soft gear mechanism through which the signals are given to the control board which with control the motor which will in turn change the hard gear. Thus the soft hand gear system for two wheelers work. The gear changing motor which is a stepper motor will rotate according to the gear required. The electronic control board makes all the controls in the system
INTRODUCTION
An automatic (also called automatic gearbox, or auto transmission) is one type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually. Most automatic transmissions have a defined set of gear ranges, often with a parking pawl feature that locks the output shaft of the transmission.
WORKING PRINCIPLE
The Automatic gear changer system is used to change the gear in a tensionless manner. In this system a fuel power is not required to change the gear. So, that the human energy will not be wasted. The system consists of a battery electronics control board, soft gear mechanism through which the signals are given to the control board which with control the motor which will in turn change the hard gear. Thus the soft hand gear system for two wheelers work. The gear changing motor which is a stepper motor will rotate according to the gear required. The electronic control board makes all the controls in the system
TYPES OF TRANSMISSION
MANUAL TRANSMISSION A manual transmission or sequential type is a type of transmission used on motorcycles and cars, where gears are selected in order, and direct access to specific gears is not possible.
AUTOMATIC TRANSMISSION: An automatic transmission is one type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually and to achieve efficient driving.
MERITS
Automatic method System is helpful for the drivers Avoids fear while driving the vehicle Quick response is achieved Simple in construction Easy to maintain and repair Cost of the unit is less Continuous operation is possible without stopping
ADVANTAGE
Low engine revolutions at constant speeds. Improved emission cont rol/fuel consumption Low noise, vibration and harshness levels. Smooth acceleration. Flexible driving on mountain roads
APPLICATION
It is applicable in all types of two wheeler vehicles