Documentos de Académico
Documentos de Profesional
Documentos de Cultura
WARRANTY WARRANTY
GearWrench hand tools are warranted for life to be free of defects in material and workmanship*. Carrying cases, pouches, accessory bits and consumable products, if any, are not covered by this warranty. If use of any GearWrench hand tool when used for its intended purpose, fails to give complete satisfaction, return it to your GearWrench distributor or contact Apex Tool Group, Emmen, NL at (0031) 591 667500, and it will be repaired or replaced free of charge. *Except torque products *GearWrench torque products are warranted to (1) be free of defects in material and workmanship for one year and (2) meet out of the box calibration accuracy standards as stated in the product literature. Accuracy standards for calibration are warranted for 90 days from date of purchase. Products for which warranty repair is requested should be returned, at Buyers cost, for evaluation to: Warranty Service & Authorized Repair: Apex Tool Group B.V. Phileas Foggstraat 16 7821 AK Emmen Drenthe The Netherlands GearWrench torque products are precision instruments that contain moving parts. These components are subject to normal wear through use and replacement thereof is the responsibility of Buyer. Torque products should be routinely checked for calibration at an Authorized Repair Center using GearWrench repair parts. This warranty shall not apply to products which have been misused, abused, damaged by accident or otherwise, repaired by anyone other than an Authorized Repair Center or modified by anyone other than Apex Tool Group, LLC, and is in lieu of all other warranties, whether express, implied or statutory. THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. Buyers sole and exclusive remedy for breach of this warranty is, at the option of Apex Tool Group, LLC, repair or replacement of the defective product. IN NO EVENT WILL APEX TOOL GROUP, LLC, BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES ARISING FROM BREACH OF THIS WARRANTY, EVEN IF APEX TOOL GROUP, LLC, HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Apex Tool Group, LLC is not responsible for personal injury or damage resulting from improper tool usage, product modification, abuse or usage beyond expected product life. For further information on GearWrench hand tools, torque products or Authorized Repair Centers, please contact us at: THE NETHERLANDS Apex Tool Group B.V. Phileas Foggstraat 16 7821 AK Emmen Drenthe Tel.: (0591) 66 75 00 Fax: (0591) 66 75 95 GREAT BRITAIN Apex Tool Group 4th Floor Pennine House Washington, Tyne & Wear NE37 1LY Tel.: (0191) 419 7700 Fax: (0191) 417 9421 FRANCE Apex Tool Group S.A.S. 25 Rue Maurice Chevalier BP 46 77832 Ozoir-la-Ferrire Cedex Tl.: (01) 60.18.55.40 Fax: (01) 64.40.33.05 GERMANY Weller Tools GmbH A company of Apex Tool Group, LLC. Carl-Benz-Strae 2 74354 Besigheim Tel.: (07143) 580-0 Fax: (07143) 580-108 ITALY Apex Tool S.r.l. Viale Europa 80 20090 Cusago (MI) Tel.: (02) 9033101 Fax: (02) 90394231
Las herramientas de mano GearWrench tienen garanta de por vida de estar exentas de defectos de material y de construccin*. Esta garanta no cubre las cajas de transporte, bolsas, piezas de accesorio y productos consumibles, en caso de que los haya. Si alguna herramienta de mano GearWrench no le satisface completamente en su uso previsto, devulvala a su distribuidor GearWrench o contacte con Apex Tool Group, Emmen, NL en (0031) 591 667500, para que la reparen o reemplacen sin coste alguno. *Excepto en los productos de par de giro *Los productos de par de giro GearWrench tienen la garanta de (1) estar exentos de defectos de material y de construccin durante el perodo de un ao y (2) cumplir con los estndar de precisin en la calibracin de fbrica tal y como se indica en la informacin del producto. Los estndar de precisin en la calibracin tienen una garanta de 90 das desde la fecha de adquisicin. Los productos que requieran una reparacin en garanta se debern devolver para que sean evaluados a la siguiente direccin, a coste del Comprador: Servicio de garanta y reparacin autorizada: Apex Tool Group B.V. Phileas Foggstraat 16 7821 AK Emmen Drenthe Pases Bajos Los productos de par de giro GearWrench son instrumentos de precisin que contienen piezas mviles. Estos componentes estn sujetos a un desgaste normal debido al uso, por esta razn, la reposicin de los mismos es responsabilidad del Comprador. La calibracin de los productos de par de giro se deber realizar regularmente en un Centro de Reparacin Autorizado que use piezas de repuesto GearWrench. La presente garanta no ser aplicable a productos usados indebidamente, maltratados o daados accidentalmente, ni para productos que no hayan sido reparados en un Centro de Reparacin Autorizado o no hayan sido modificados por Apex Tool Group, LLC, y anula todas las dems garantas, ya sean explcitas, implcitas o legales. SE EXCLUYEN DE FORMA ESPECFICA LAS GARANTAS IMPLCITAS DE COMERCIABILIDAD Y ADECUACIN A UN USO PARTICULAR. La enmienda nica y exclusiva que se le ofrece al Comprador por el incumplimiento de la presente garanta es, a discrecin de Apex Tool Group, LLC, la reparacin o reposicin del producto defectuoso. APEX TOOL GROUP, LLC, NO SE HAR RESPONSABLE EN NINGN CASO DE LOS DAOS INDIRECTOS, ESPECIALES, ACCIDENTALES, SECUNDARIOS O PENALES CAUSADOS POR EL INCUMPLIMIENTO DE ESTA GARANTA, INCLUSO SI APEX TOOL GROUP, LLC, ESTUVIERA AL CORRIENTE DE LA POSIBILIDAD DE TALES DAOS. Apex Tool Group, LLC no se hace responsable de las lesiones personales ni los daos derivados del uso indebido de la herramienta, modificacin del producto, maltrato o uso ms all de la vida til prevista del producto. Para recibir ms informacin acerca de las herramientas de mano, productos de par de giro o Centros de Reparacin Autorizados GearWrench contacte con nosotros en: PASES BAJOS Apex Tool Group B.V. Phileas Foggstraat 16 7821 AK Emmen Drenthe Tel.: (0591) 66 75 00 Fax: (0591) 66 75 95 GRAN BRETAA Apex Tool Group 4th Floor Pennine House Washington, Tyne & Wear NE37 1LY Tel.: (0191) 419 7700 Fax: (0191) 417 9421 FRANCIA Apex Tool Group S.A.S. 25 Rue Maurice Chevalier BP 46 77832 Ozoir-la-Ferrire Cedex Tl.: (01) 60.18.55.40 Fax: (01) 64.40.33.05 GEARWRENCH es una marca registrada de Apex Brands, Inc. GearBox, X-Beam, Quadbox, Vortex, Pass-Thru, GearPlier, Double-X y GearDriver son marcas registradas de Apex Brands, Inc. www.gearwrench.com ALEMANIA Weller Tools GmbH A company of Apex Tool Group, LLC. Carl-Benz-Strae 2 74354 Besigheim Tel.: (07143) 580-0 Fax: (07143) 580-108 ITALIA Apex Tool S.r.l. Viale Europa 80 20090 Cusago (MI) Tel.: (02) 9033101 Fax: (02) 90394231
GEARWRENCH is a registered trademark of Apex Brands, Inc. GearBox, X-Beam, Quadbox, Vortex, Pass-Thru, GearPlier, Double-X, and GearDriver are trademarks of Apex Brands, Inc. www.gearwrench.com
TOOL STORAGE ALMACENAJE DE LA HERRAMIENTA MIXED SETS JUEGOS MIXTES RATCHETS & DRIVE TOOLS TRINQUETES Y HERRAMIENTAS DE LA IMPULSIN SOCKETS & FLEX HEX ZCALOS Y HEXAGONALES FLEXIBLES WRENCHES LLAVES TORQUE WRENCHES LLAVES DE ESFUERZO DE TORSIN SCREWDRIVERS DESTORNILLADORES PLIERS ALICATES PRY BARS BARRAS DE PALANCA STRIKING TOOLS HERRAMIENTAS LLAMATIVAS TAP AND DIE GOLPEE LIGERAMENTE Y MUERA CUTTING CORTANDO SPECIALTY TOOLS HERRAMIENTAS DE LA ESPECIALIDAD TECHNICAL EDUCATION SETS SISTEMAS DE LA EDUCAIN TCNICA
9 13 20 24 33 41 44 47 51 53 55 58 59 60
GearWrench started when we developed a ratcheting wrench that stood up to professional environments GearWrench inicia su andadura cuando decidimos desarrollar una llave de carraca que se adaptara a los entornos profesionales
As more professionals began to use ratcheting wrenches, we spent time solving more access problems and introducing other wrench styles A medida que ms profesionales empezaban a usar llaves de carraca, nosotros dedicamos ms tiempo a resolver problemas de accesibilidad e introdujimos nuevos modelos de llaves
Having success in wrenches, we began to integrate ratcheting mechanisms into screwdrivers and other traditionally non-ratcheting tools Gracias al xito obtenido con las llaves, empezamos a integrar los mecanismos de carraca en destornilladores y otras herramientas que tradicionalmente no usaban este sistema
1997
1998
1999
2000
2001
2002
2003
GEARRATCHET VORTEX SOCKET SYSTEM SISTEMA DEL ZCALO DEL VRTICE GEARRATCHET
GEARDRIVER INTERCHANGABLE SHAFT SYSTEM SISTEMA DEL ZCALO DEL VRTICE GEARDRIVER
The Reversible and Flex style wrenches were born from user feedback, with an eye for how to work in tight spaces Los modelos de llave Reversible y Flex nacieron de la respuesta de los usuarios, sabedores de cmo trabajar en lugares estrechos By 2002, we had sold over 100 million wrenches and earned a name for producing the highest quality tools at a great value En 2002 ya habamos vendido ms de 100 millones de llaves y nos hicimos un nombre por ser los productores de las herramientas de ms calidad al mejor precio
Starting with the Original combination ratcheting wrench, we quickly expanded to stubby and double box as these were traditional non-ratcheting wrench configurations Empezamos con la llave de carraca combinada Original y rpidamente nos expandimos a los modelos rolliza y de doble boca, que tradicionalmente no integraban este sistema
GearWrench has received numerous industry awards for producing productivity tools such as GearPlier, Magnetic Oil Drain Plug sockets, X-Beam Ratcheting Wrenches, and Indexing Pry Bars GearWrench ha recibido numerosos premios de la industria por producir herramientas productivas como GearPlier, vasos magnticos para tornillos de drenaje de aceite, llaves de carraca X-Beam y palancas indexables
In 2006, GearWrench introduced the broadest line expansion in its history with the addition of awardwinning ratchets, sockets, screwdrivers, pliers, and torque wrenches En 2006 GearWrench introdujo la mayor expansin de lneas de su historia con la adicin de las llaves de carraca, de vaso, destornilladores, alicates y llaves de par de giro, reconocidas con diversos premios
GearWrench has continued to innovate products by adding productivity features to products like pry bars, hemostats, and tool boxes GearWrench sigue innovando sus productos mediante la inclusin de cualidades productivas a productos como palancas, hemostatos y cajas de herramientas
2004
2005
2006
2007
2008
2009
2010
2011
X-BEAM RATCHETING WRENCH LLAVE RATCHETING DE X-BEAM INDEXING PRY BAR BARRO DE PRY INDEXING
STUBBY FLEX RATCHETING WRENCH LLAVE RATCHETING FLEXIBLE RATCHETING TAP & DIE RATCHETING DIE Y TAPA STANDARD & DEEP SOCKETS ESTNDAR Y ZCALOS PROFUNDOS HALF MOON RATCHETING WRENCH LLAVE RATCHETING MEDIA LUNA
SCREWDRIVERS DESTORNILLADORES
PLIERS ALICATES
Industrial Maintenance & Repair Organizations Aviation Alternative Energy Commercial Construction Organizaciones de mantenimiento industrial y asistencia Aviacin Energas alternativas Construccin comercial
MERCHANDISE MERCHANDADO
Image is everything, and at GearWrench. we dont disappoint. We offer a full assortment of hats, t-shirts, jackets, decals, polos, key chains, and much more. Visit our store at www. gearwrenchmerchandise.com for the latest updates and to view and purchase our complete selection. La imagen lo es todo, y en GearWrench no decepcionamos. Ofrecemos un surtido completo de gorras, camisetas, chaquetas, adhesivos para coches, polos, llaveros y mucho ms. Visite nuestra tienda en www.gearwrenchmerchandise.com para consultar las ltimasactualizaciones y para ver y comprar nuestra coleccin completa.
Check out the many motosports and racing events we participate in by visiting www.gearwrench.com for event dates. Consulte la variedad de deportes de motor y carreras en las que participamos en www. gearwrench.com para las fechas de los eventos.
WWW.GEARWRENCH.COM WWW.GEARWRENCH.COM
Visit our website www.gearwrench.com for the latest news, product reviews, and information on what were up to. One of the best ways to stay informed is to sign up for our newsletter. Its fast, easy, and private and a great way to stay in the know on what were doing. Visite nuestra pgina web www.gearwrench.com para las ltimas novedades, valoraciones de los productos e informaciones de nuestros proyectos ms recientes. Una de las mejores maneras de mantenerse informado es suscribindose a nuestro boletn informativo. Es rpido, fcil y confidencial, adems de una buena manera de estar a la ltima en lo que hacemos. Get product dimensions and specifications Get images and other product details See product demonstration videos Obtenga las dimensiones y especificaciones de los productos Obtenga imgenes y otros detalles de los productos Vea vdeos de demostracin de los productos
SUPERIOR PROTECTION
barrel style lock and key
PROTECCIN SUPERIOR
sistema de cerradura y llave de tipo tambor
83152
2 DRAWER, 800 mm
dimensions: (W x D x H) 800 x 521 x 914 mm weight: 46,2 kg
CAJN 4, 800 mm
dimensiones: (L x A x A) 800 x 521 x 1041 mm peso: 63,4 kg
CAJN 2, 800 mm
dimensiones: (L x A x A) 800 x 521 x 914 mm peso: 46,2 kg
83156
CAJN 4, 1067 mm
dimensiones: (L x A x A) 1067 x 464 x 521 mm peso: 72,5 kg
CAJN 4, 660 mm
dimensiones: (L x A x A) 660 x 406 x 483 mm peso: 33 kg
83157
CAJN 7, 660 mm
dimensiones: (L x A x A) 673 x 457 x 991 mm peso: 69,8 kg
CAJN 9, 1346 mm
dimensiones: (L x A x A) 1346 x 483 x 1003 mm peso: 147,7 kg
9 mm top mat provides protection and support on all cabinets Tapiz superior de 9 mm para mayor proteccin y apoyo en todos los armarios
10
11
attach extensions to ratchets for greater reach aada extensiones a las carracas para un mayor alcance
THUMBWHEEL RATCHET reversing lever and ergo grip makes adjustments fast and easy CARRACA CON EMPUADURA DE RUEDA palanca de inversin y empuadura ergonmica hacen que los ajustes sean rpidos y fciles
13
80326
14
15
16
Chrome Molyebdenum Alloy Steel (CR-MO) for exceptional strength and durability Aleacin de acero y cromo-molibdeno (CR-MO) para una excepcional resistencia y durabilidad
17
PASS-THRU
LOCKING FLEX RATCHET GEARRATCHET TRINQUETES DE LOCKING FLEX GEARRATCHET
5 ratcheting arc versus 12 on conventional ratchets arco de carraca de 5 frente a los 12
one touch release for 11 locking positions liberacin de un toque para 11 posiciones de
up to 50% thinner than conventional ratchet systems hasta un 50% ms fino que los sistemas de carraca dual material handle for improved ergonomics empuadura de dos materiales para mayor ergonoma
up to 40% stronger by eliminating drive tang reach fasteners in tight spaces with ease hasta un 40% ms fuerte por prescindir de la base de conexin alcanza con facilidad los cierres en lugares
XL PASS-THRU RATCHET SET FEATURING LOCKING FLEX GEARRATCHET HANDLE JUEGO DE TRINQUETE XL PASS-THRU EMPUADURA PARA GEARRATCHET DE BLOQUEO FLEX
891427 27 PC. 1/4" DRIVE SET SAE/METRIC
(10) VORTEX SAE SOCKETS: 5/32"9/16" (13) VORTEX METRIC SOCKETS: 3.513 mm (4) DRIVE TOOLS: 3" AND 6" VORTEX EXTENSIONS; 1/4" SQ. DR. QUICK-RELEASE ADAPTER; LOCKING FLEX GEARRATCHET HANDLE
18
Vortex bit sockets are broached for use with conventional square drive ratchets Los vasos de punta Vortex se crearon para ser usados con carracas convencionales de conexin cuadrada
19
QUALITY DESIGN FOR EASY USE dual material handle for less hand fatigue longer handle for more leverage DISEO DE CALIDAD PARA USO FCIL empuadura de dos materiales para menor cansancio de la mano empuadura ms larga para mayor efecto de palanca
lower profile head provides better access versus competition el perfil de cabeza ms estrecho permite mejor accesibilidad que sus competidores
81208
3/8" drive tamao 3/8" 3/8" drive
81210
tamao 3/8
81303
1/2" drive tamao 1/2"
20
INCREASED PRODUCTIVITY
head rotates 180 degress less than 5 swing arc for greater access rotacin de cabeza de 180 grados enos de 5 de giro de arco para mejor m accesibilidad
81225
3/8" drive tamao 3/8"
81215
3/8" drive tamao 3/8"
81011D
1/4" drive tamao 1/4"
81306
1/2" drive tamao 1/2
81211
3/8" drive tamao 3/8"
81304
1/2" drive tamao 1/2"
21
ACABADO EN CROMO
81221
tamao 3/8" longitud 12"
81099
1/4" drive ratchet repair kit tamao 1/4" carraca kit de reparacin
81227
3/8 drive ratchet repair kit tamao 3/8" carraca kit de reparacin
81339
1/2 drive ratchet repair kit tamao 1/2" carraca kit de reparacin
81307
1/2" drive 15" length tamao 1/2" longitud 15" 1/2" drive 24" length
81308D
tamao 1/2" longitud 24"
ADAPTERS ADAPTADORES
FULL POLISH FINISH easy to clean for use with sockets and ratchets ACABADO PULIDO TOTAL fcil de limpiar para usar con vasos y carracas
80100
80549
80600D
81217
81127
1/4" F x 3/8" M adapter
81354
1/2" F x 3/8" M adapter 1/2" F x 3/8" M adaptador
22
QUALITY full polished CALIDAD pulido total LESS SLIPPING knurled area for added finger grip MENOS DESLIZANTE rea estriada para mayor agarre de los dedos
get better access into tight spaces obtenga una mejor accesibilidad a espacios estrechos
EXTENDERS EXTENDADORES
1/4" DRIVE TAMAO 1/4" 81113D
3" length longitud de 3"
81116
6" length longitud de 6"
81242
longitud de 6"
81243
10" length longitud de 10"
81341
longitud de 5"
81244
12" length longitud de 12"
81342
10" length longitud de 10"
serration depth as deep as the fastener profundidad de endentadura igual a la del cierre
23
SOCKETS DADOS
SOCKETS VASOS
PRODUCTION PRODUCCIN
Knurled Line (MM) & Double Line (SAE) to easily identify sockets Lnea estriada (MM) y lnea doble (SAE) para identificar fcilmente los vasos
Internal slides eliminate interference Ball bearing retention on drive tang Patented slide rail feature for easier positioning of sockets Los deslizamientos interiores eliminan interferencias Retencin de cojinete de bolas en la base de la conexin Riel de deslizamiento patentado para posicionar los vasos con ms facilidad
80306
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
80304
DRIVE PUNTA
80308
DRIVE PUNTA
1/4 3/8
1/4 3/8
DRIVE PUNTA
DRIVE PUNTA
24
FULL POLISHED NICKEL CHROME PLATED NQUEL PULIDO TOTAL RECUBIERTO DE CROMO
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
Size Tamao
4 mm 4 mm 5 mm 5 mm 5.5 mm 5.5 mm 6 mm 6 mm 7 mm 7 mm 8 mm 8 mm 9 mm 9 mm 10 mm 10 mm 11 mm 11 mm 12 mm 12 mm 13 mm 13 mm 14 mm 14 mm 15 mm 15 mm
Description Descripcin
6 Point Standard Socket Vaso estndar de 6 puntos 6 Point Standard Socket Vaso estndar de 6 puntos 6 Point Standard Socket Vaso estndar de 6 puntos 6 Point Standard Socket Vaso estndar de 6 puntos 6 Point Standard Socket Vaso estndar de 6 puntos 6 Point Standard Socket Vaso estndar de 6 puntos 6 Point Standard Socket Vaso estndar de 6 puntos 6 Point Standard Socket Vaso estndar de 6 puntos 6 Point Standard Socket Vaso estndar de 6 puntos 6 Point Standard Socket Vaso estndar de 6 puntos 6 Point Standard Socket Vaso estndar de 6 puntos 6 Point Standard Socket 6 Point Standard Socket 6 Point Standard Socket Vaso estndar de 6 puntos
Size Tamao
4 mm 4 mm 5 mm 5 mm 5.5 mm 5.5 mm 6 mm 6 mm 7 mm 7 mm 8 mm 8 mm 9 mm 9 mm 10 mm 10 mm 11 mm 11 mm 12 mm 12 mm 13 mm 13 mm 14 mm 14 mm 15 mm 15 mm
Description Descripcin
12 Point Standard Socket Vaso estndar de 12 puntos 12 Point Standard Socket Vaso estndar de 12 puntos 12 Point Standard Socket Vaso estndar de 12 puntos 12 Point Standard Socket Vaso estndar de 12 puntos 12 Point Standard Socket Vaso estndar de 12 puntos 12 Point Standard Socket Vaso estndar de 12 puntos 12 Point Standard Socket Vaso estndar de 12 puntos 12 Point Standard Socket Vaso estndar de 12 puntos 12 Point Standard Socket Vaso estndar de 12 puntos 12 Point Standard Socket Vaso estndar de 12 puntos 12 Point Standard Socket Vaso estndar de 12 puntos 12 Point Standard Socket Vaso estndar de 12 puntos 12 Point Standard Socket Vaso estndar de 12 puntos
DRIVE PUNTA
DRIVE PUNTA
ACCESS ACCESO
Thin wall desgin to access tight spaces Diseo de pared fina para acceder a lugares estrechos
25
SOCKETS DADOS
OPEN STOCK DEEP SOCKETS UNIDADES DE VASOS LARGOS
Item No. Referencia
80138 80139 80140 80141 80142
Size Tamao
4 mm 4 mm 5 mm 5 mm 5.5 mm 5.5 mm 6 mm 6 mm 7 mm 7 mm 8 mm 8 mm 9 mm 9 mm 10 mm 10 mm 11 mm 11 mm 12 mm 12 mm 13 mm 13 mm 14 mm 14 mm 15 mm 15 mm
Description Descripcin
6 Point Deep Socket Vaso estndar de 6 puntos 6 Point Deep Socket Vaso estndar de 6 puntos 6 Point Deep Socket Vaso estndar de 6 puntos 6 Point Deep Socket Vaso estndar de 6 puntos 6 Point Deep Socket Vaso estndar de 6 puntos 6 Point Deep Socket Vaso estndar de 6 puntos 6 Point Deep Socket Vaso estndar de 6 puntos 6 Point Deep Socket Vaso estndar de 6 puntos 6 Point Deep Socket Vaso estndar de 6 puntos 6 Point Deep Socket Vaso estndar de 6 puntos 6 Point Deep Socket Vaso estndar de 6 puntos 6 Point Deep Socket Vaso estndar de 6 puntos 6 Point Deep Socket Vaso estndar de 6 puntos
Size Tamao
4 mm 4 mm 5 mm 5 mm 5.5 mm 5.5 mm 6 mm 6 mm 7 mm 7 mm 8 mm 8 mm 9 mm 9 mm 10 mm 10 mm 11 mm 11 mm 12 mm 12 mm 13 mm 13 mm 14 mm 14 mm 15 mm 15 mm
Description Descripcin
12 Point Deep Socket Vaso estndar de 12 puntos 12 Point Deep Socket Vaso estndar de 12 puntos 12 Point Deep Socket Vaso estndar de 12 puntos 12 Point Deep Socket Vaso estndar de 12 puntos 12 Point Deep Socket Vaso estndar de 12 puntos 12 Point Deep Socket Vaso estndar de 12 puntos 12 Point Deep Socket Vaso estndar de 12 puntos 12 Point Deep Socket Vaso estndar de 12 puntos 12 Point Deep Socket Vaso estndar de 12 puntos 12 Point Deep Socket Vaso estndar de 12 puntos 12 Point Deep Socket Vaso estndar de 12 puntos 12 Point Deep Socket Vaso estndar de 12 puntos 12 Point Deep Socket Vaso estndar de 12 puntos
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
VISIBILITY VISIBILIDAD
Hard stamped size for ease of identification Tamao estampado en grande para identificacin fcil
Size Tamao
5 mm 5 mm 5.5 mm 5.5 mm 6 mm 6 mm 7 mm 7 mm 8 mm 8 mm 9 mm 9 mm
Description Descripcin
6 Point Flex Socket Vaso flexible de 6 puntos 6 Point Flex Socket Vaso flexible de 6 puntos 6 Point Flex Socket Vaso flexible de 6 puntos 6 Point Flex Socket Vaso flexible de 6 puntos 6 Point Flex Socket Vaso flexible de 6 puntos 6 Point Flex Socket Vaso flexible de 6 puntos
Size Tamao
10 mm 10 mm 11 mm 11 mm 12 mm 12 mm 13 mm 13 mm 14 mm 14 mm 15 mm 15 mm
Description Descripcin
6 Point Flex Socket Vaso flexible de 6 puntos 6 Point Flex Socket Vaso flexible de 6 puntos 6 Point Flex Socket Vaso flexible de 6 puntos 6 Point Flex Socket Vaso flexible de 6 puntos 6 Point Flex Socket Vaso flexible de 6 puntos 6 Point Flex Socket Vaso flexible de 6 puntos
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
26
DADOS SOCKETS
1/4 DRIVE PUNTA 80552
DRIVE PUNTA
SOCKETS VASOS
1/4 DRIVE PUNTA 80560
DRIVE PUNTA
3/8 1/2
3/8 1/2
DRIVE PUNTA
DRIVE PUNTA
1/4 80554
DRIVE PUNTA
1/4 80562
DRIVE PUNTA DRIVE PUNTA
3/8 1/2
3/8 1/2
DRIVE PUNTA
DRIVE PUNTA
3/8 1/2
DRIVE PUNTA
Size Tamao
6 mm 6 mm 7 mm 7 mm 8 mm 8 mm 9 mm 9 mm 10 mm 10 mm 11 mm 11 mm 12 mm 12 mm 13 mm 13 mm
Description Descripcin
6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos
Size Tamao
14 mm 14 mm 15 mm 15 mm 16 mm 16 mm 17 mm 17 mm 18 mm 18 mm 19 mm 19 mm 20 mm 20 mm 21 mm 21 mm 22mm 22 mm
Description Descripcin
6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos 6 Point Standard Socket Vaso largo de 6 puntos
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
27
SOCKETS DADOS
OPEN STOCK DEEP SOCKETS UNIDADES DE VASOS LARGOS
Item No. Referencia
80388 80389 80390 80391 80392
DRIVE PUNTA
Size Tamao
6 mm 6 mm 7 mm 7 mm 8 mm 8 mm 9 mm 9 mm 10 mm 10 mm 11 mm 11 mm 12 mm 12 mm 13 mm 13 mm 14 mm 14 mm 15 mm 15 mm 16 mm 16 mm 17 mm 17 mm 18 mm 18 mm 19 mm 19 mm 20 mm 20 mm 21 mm 21 mm
Description Descripcin
6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos
Size Tamao
22 mm 22 mm 24 mm 24 mm 6 mm 6 mm 7mm 7 mm 8 mm 8 mm 9 mm 9 mm 10 mm 10 mm 11 mm 11 mm 12 mm 12 mm 13 mm 13 mm 14 mm 14 mm 15 mm 15 mm 16 mm 16 mm 17 mm 17 mm 18 mm 18 mm 19 mm 19 mm
Description Descripcin
6 Point Deep Socket Vaso largo de 6 puntos 6 Point Deep Socket Vaso largo de 6 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos 12 Point Deep Socket Vaso largo de 12 puntos
DRIVE PUNTA
DRIVE PUNTA
PRODUCTION
Knurled Line (MM) & Double Line (SAE) to easily identify sockets
PRODUCCIN
Lnea estriada (MM) y lnea doble (SAE) para identificar fcilmente los vasos
Size Tamao
10 mm 10 mm 11 mm 11 mm 12 mm 12 mm 13 mm 13 mm 14 mm 14 mm
Description Descripcin
6 Point Flex Socket Vaso largo de 6 puntos 6 Point Flex Socket Vaso largo de 6 puntos 6 Point Flex Socket Vaso largo de 6 puntos 6 Point Flex Socket Vaso largo de 6 puntos 6 Point Flex Socket Vaso largo de 6 puntos
Size Tamao
15 mm 15 mm 16 mm 16 mm 17 mm 17 mm 18 mm 18 mm 19 mm 19 mm
Description Descripcin
6 Point Flex Socket Vaso largo de 6 puntos 6 Point Flex Socket Vaso largo de 6 puntos 6 Point Flex Socket Vaso largo de 6 puntos 6 Point Flex Socket Vaso largo de 6 puntos 6 Point Flex Socket Vaso largo de 6 puntos
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
28
DRIVE PUNTA
1/4
DADOS SOCKETS
SOCKETS SOCKETS
3/8 DRIVE PUNTA 80710D
DRIVE PUNTA DRIVE PUNTA
1/4
1/2
1/2
12, 13 14, 15, 16, 17, 18,1/4 DRIVE PUNTA 19, 20, 21, 22, 23, 24mm
1/4 12, 13 14, 15, 16, 17, 18, DRIVE PUNTA 19, 20, 21, 22, 23, 24 mm 3/8 80712
DRIVE PUNTA DRIVE PUNTA
3/8 80704
DRIVE PUNTA DRIVE PUNTA
1/2
1/2
Ball and Standard Hex in all sizes Hexagonal con bola y estndar para
PHILLIPS PHILLIPS
POZIDRIV POZIDRIV
Heat treated socket bases for durability and serviceability Bases de vaso con tratamiento de calor para mayor durabilidad y servicio
29
SOCKETS DADOS
MASTER TORX SETS JUEGO MASTER TORX
80726D 36 PC. MASTER TORX SET WITH HEX BIT SOCKETS
1/4" DRIVE: (6) TORX PRESS FIT BIT SOCKETS: T-10T-30 (4) EXTERNAL TORX SOCKETS: E-5E-8 3/8" DRIVE: (5) TORX PRESS FIT BIT SOCKETS: T-40T-55 (6) SAE HEX BIT SOCKETS: 5/32"3/8" (10) METRIC HEX BIT SOCKETS: 210 (5) EXTERNAL TORX SOCKETS: E-10E-16 1/2" DRIVE: (1) EXTERNAL TORX SOCKET: E-18
DRIVE PUNTA
1/4
DRIVE PUNTA
3/8
DRIVE PUNTA
1/2
Patented bit holding system forces bit surface to opposing side for maximum bit retention El sistema patentado de sujecin de puntas fuerza la superficie de la punta hacia el lado opuesto para garantizar la mxima retencin de la punta
80727
DRIVE PUNTA
1/4
DRIVE PUNTA
3/8
DRIVE PUNTA
1/2
30
DADOS SOCKETS
BIT SOCKETS VASOS DE PUNTA
80723
DRIVE PUNTA
80725
DRIVE PUNTA
1/4
DRIVE PUNTA
3/8
DRIVE PUNTA
1/2
1/4
DRIVE PUNTA
3/8
DRIVE PUNTA
1/2
80582
DRIVE PUNTA
80722
DRIVE PUNTA
1/4
DRIVE PUNTA
3/8
DRIVE PUNTA
1/2
1/4
DRIVE PUNTA
3/8
DRIVE PUNT
1/2
80580
DRIVE PUNTA
80573
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
Torx is a registered trademark of Acument Intellectual Properties, LLC. Torx es una marca registrada de Acument Intellectual Properties, LLC.
31
SOCKETS DADOS
OPEN STOCK EXTERNAL TORX SOCKETS UNIDADES DE VASOS TORX EXTERNOS
Item No. Referencia
80190D 80460D 80461D 80462D
Description Descripcin
External Torx Socket Vaso Torx externo External Torx Socket Vaso Torx externo External Torx Socket Vaso Torx externo External Torx Socket Vaso Torx externo
Size Tamao
4 mm 4 mm 5 mm 5 mm 6 mm 6 mm 7 mm 7 mm 8 mm 8 mm
Description Descripcin
Hex Bit Socket Socket Vaso de punta hexagonal Hex Bit Socket Socket Vaso de punta hexagonal Hex Bit Socket Socket Vaso de punta hexagonal Hex Bit Socket Socket Vaso de punta hexagonal Hex Bit Socket Socket Vaso de punta hexagonal
OPEN STOCK TORX PRESS FIT BIT SOCKETS UNIDADES DE VASOS DE PUNTA TORX DE ENCAJE A PRESIN
Item No. Referencia
80667
Description Descripcin
Torx Press Fit Bit Socket Vaso de punta Torx de encaje a presin
Torx is a registered trademark of Acument Intellectual Properties, LLC. Torx es una marca registrada de Acument Intellectual Properties, LLC.
82411
6 PC. FLEX HEX KEY SET CHROME
3, 4, 5, 6, 8, 10 mm
32
PATENTED AWARD WINNING DESIGN DISEO PATENTADO GANADOR DE VARIOS PREMIOS POLISHED CHROME FINISH ACABADO EN CROMO PULIDO
X-Beam le permite aplicar la fuerza sobre el plano para reducir el cansancio de la mano
XL X-BEAM XL X-BEAM
85888
12 PC. COMBINATION *RATCHETING WRENCH SET
8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19 mm
XL X-BEAM
FLEX COMBINATION RATCHETING WRENCH LLAVE DE CARRACA COMBINADA FLEXIBLE
33
XL COMBINATION COMBINADAS XL
85099
16 PC. RATCHETING WRENCH SET
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 mm
XL COMBINATION COMBINADAS XL
85098
12 PC. RATCHETING WRENCH SET
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
XL XL
COMBINATION RATCHETING WRENCH LLAVE DE CARRACA COMBINADA
COMFORT
OVAL SHAPED BEAM
COMODIDAD
COMBINATION COMBINADA
9416
16 PC. COMBINATION RATCHETING WRENCH SET
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 mm
9412
12 PC. COMBINATION RATCHETING WRENCH SET
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
34
COMBINATION COMBINADA
9417
7 PC. COMBINATION RATCHETING WRENCH SET
8, 10, 12, 13, 14, 15, 18mm
93004D
9413
4 PC. COMBINATION RATCHETING WRENCH SET
21, 22, 24, 25 mm
9520D
10 PC. STUBBY COMBINATION RATCHETING WRENCH SET
10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
35
15 OFFSET 15 DE INCLINACIN
REVERSIBLE REVERSIBLE
9602N
16 PC. COMBINATION RATCHETING WRENCH SET
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 25 mm
9620N
12 PC. COMBINATION RATCHETING WRENCH SET
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
FLEX FLEX
COMBINATION RATCHETING WRENCH LLAVE DE CARRACA COMBINADA
ADJUSTABLE TENSION SCREW TORNILLO DE TENSIN AJUSTABLE
FLEX FLEX
9902D
16 PC. COMBINATION RATCHETING WRENCH SET
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 25 mm
9901D
12 PC. COMBINATION RATCHETING WRENCH SET
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
36
Up to 40% Longer beam increases leverage to maximize torque at the non-ratcheting box end for breaking loose stubborn fasteners El brazo, hasta un 40% ms largo, aumenta el efecto de palanca y maximiza el par de giro en la boca sin carraca para liberar cierres persistentes
ZERO DEGREE OFFSET SLIM PROFILE PERFIL FINO CERO GRADOS INCLINACIN
85989
85987
5 PC. DOUBLE BOX RATCHETING WRENCH ADD-ON SET
20, 21, 22, 24, 25 mm
37
INDEXING INDEXABLE
85488
12 PC. RATCHETING WRENCH SET
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
Provides a stronger grip on fasteners Proporciona una agarre ms fuerte de los cierres
Moves a fastener with as little as 5 of movement Mueve un cierre con tan solo 5 de movimiento
Turn nuts and bolts without removing the wrench Gire tuercas y tornillos sin quitar la llave
38
LLAVES WRENCHES
NON-RATCHETING NON-RATCHETING
ACCESS
Offset box end
ACCESO
Boca inclinada
PRODUCTION
Size stamped on both sides of beam and head PRODUCCIN Tamao estampado en ambos lados del brazo y de la cabeza
FUERZA Y PRODUCCIN
Proporciona una agarre ms fuerte de los cierres Reduce las vueltas del cierre Proporciona hasta un 25% ms de par de giro
LENGTH
Long Pattern
LONGITUD
Muesca larga
81902
81920
18 PC. LONG PATTERN WRENCH SET WITH ROLL
7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm
39
STUBBY ROLLIZA
81904
10 PC. WRENCH SET
10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
STUBBY ROLLIZA
NON-RATCHETING WRENCH LLAVE SIN CARRACA
POLISHED CHROME FINISH ACABADO EN CROMO PULIDO
Size stamped on both sides for quick identification Tamao estampado en ambos lados para identificacin rpida
CROWFOOT CROWFOOT
81909
10 PC. DRIVE WRENCH SET
10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
40
Sealed tear-drop head provides access and strength and keeps out contaminants
FUERZA
La cabeza en lgrima sellada proporciona acceso y fuerza al tiempo que impide el paso de contaminantes
SPEED
COMFORT
TWIST LOCK
VELOCIDAD
COMODIDAD
PESTILLO GIRATORIO
85050
MICROMETER TORQUE WRENCH
TORQUE RANGE 30200 in/lbs
DRIVE PUNTA
85051
MICROMETER TORQUE WRENCH
TORQUE RANGE 25250 in/lbs
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
85052
MICROMETER TORQUE WRENCH
TORQUE RANGE 10100 ft/lbs
DRIVE PUNTA
DRIVE PUNTA
85056D
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
DRIVE PUNTA
1/4
DRIVE PUNTA
1/2
1/2
41
1/4
85055
MICROMETER TORQUE WRENCH
TORQUE RANGE 100600 ft/lbs
DRIVE PUNTA
1/2
3/4
SEALED HEAD DESIGN Guards against infiltration CABEZA SELLADA DISEO Protege contra infiltraciones ANGLE ACCURACY +/1% of reading PRECISIN DE NGULO +/1% de lectura
Digitally tracks torque and angle measurements. Buzzer with Red, Yellow, and Green lights alert you when targets are reached Monitorea digitalmente las mediciones de par de giro y ngulo. Alarma con luces rojas, amarillas y verdes para avisar cuando se alcanzan los objetivos
Backlit LCD screen makes reading torque angle values quick and easy La pantalla LCD retroiluminada facilita y agiliza la lectura de los valores de ngulo de par de giro
TORQUE ACCURACY +/2% CW, +/3% CCW from 20% to 100% full scale PRECISIN DE PAR DE GIRO +/2% en el sentido de las agujas del reloj, +/3% en el sentido contrario del 20% al 100% de toda la escala
GRIP Knurled aluminum grip resists slipping EMPUADURA La empuadura estriada de aluminio evita el deslizamiento
42
1/4
1/4 85073
DRIVE PUNTA
3/8 85074
DRIVE PUNTA
DRIVE PUNTA
3/8 1/2
DRIVE PUNTA
DRIVE PUNTA
1/2
1/4
1/4 85070
DRIVE PUNTA
DRIVE PUNTA
3/8 1/2
1/2
DRIVE PUNTA
TIRE PRESSURE MONITORING SYSTEM TORQUE WRENCH LLAVE DE PAR DE GIRO PARA SISTEMA DE MONITOREO DE PRESIN DE NEUMTICOS
COMFORT
Non slip cushion grip handle
SPEED
COMODIDAD
Combines accuracy of an electronic torque wrench with the speed and ease of a mechanical style
VELOCIDAD
Green light indicates power on. Red light and buzzer signal indicate specified torque has been reached. La luz verde indica que la llave est encendida. La luz roja y la alarma indican que se ha alcanzado el par de giro especificado.
Combina la precisin de una llave de par de giro electrnica con la velocidad y sencillez de un estilete mecnico
ACCURACY PRECISIN
Accurate +/2% Precisin de +/2%
85072
DRIVE PUNTA
FLEXIBLE
Drive tang can be used in a straight position for speed and 90 for leverage and torque
FLEXIBLE
DRIVE PUNTA
La base de conexin se puede usar en posicin recta para velocidad y en 90 para efecto de palanca y par de giro
DRIVE PUNTA
43
SCREWDRIVERS DESTORNILLADORES
44
DESTORNILLADORES SCREWDRIVERS
DUAL MATERIAL SETS JUEGOS DE MATERIAL DUAL
80051 12 PC. COMBINATION SCREWDRIVER SET
(6) SLOTTED: 1/4" x 1-1/2", 1/4" x 4", 1/4" x 6", 3/16 x 6, 5/16 x 6, 3/8 x 8 (6) PHILLIPS: #0 x 2-1/2", #1 x 3", #1 x 6", #2 x 1-1/2", #2 x 4", #3 x 6"
80055
EL TAMAO IMPORTA
punta de tamao pequeo y 60 mm de longitud para precisin 6 PC. MINI SCREWDRIVER SET
COLOR CODED
cap indicates tip style:
black - Phillips; red - slotted; gray - Torx
CDIGO DE COLOR
la tapa indica el tipo de punta: negro - Phillips; rojo - plano; gris - Torx
45
RATCHETING 8 reversible ratcheting mechanism Ratcheting or non-ratcheting modes CARRACA Mecanismo de carraca reversible de 8 Modos con carraca y sin carraca
Stores up to 12 bits
TAPA EXTRABLE
46
ADDED REACH Jaws open greater distance than the handle ALCANCE AADIDO Las mandbulas abren ms que la empuadura ACCESS TIGHT SPACES Compound joint for access with minimum handle movement ACCEDE A LUGARES ESTRECHOS Articulacin combinada para acceder con el mnimo movimiento de empuadura ALLIGNED SERRATED TIPS For precision gripping ALLIGNED SERRATED TIPS For precision gripping
APPLICATIONS Long reach cotter pin removal Use as a pick-up tool Access under engine cowlings for aviation and automotive Electrical terminal instilation and removal
APLICACIONES Extraccin de pasadores de largo alcance Funcin de recogedor Acceso bajo los caps de motores para aviacin y automocin Para instalaciones y desmontajes de terminales elctricos
47
PLIERS ALICATES
DOUBLE-X PLIERS ALICATES DOUBLE-X
82005D 82006D
82106
82107
82110D
48
AVAILABLE IN: Slip Joint Diagonal Bent Nose Long Nose Duck Bill Linesmans Fence COMFORT Exclusive rounded inside edges COMFORT Curvatura exclusiva en ngulos interiores Curved gripping jaws Mandbulas de agarre DISPONIBLE EN: Articulacin deslizante Diagonal Boca acodada Boca larga Boca de pato Universales Alambrado
82103
4 PC. MIXED PLIERS SET
TONGUE AND GROVE PLIERS DIAGONAL CUTTING PLIERS LONG NOSE PLIERS SLIP JOINT PLIERS
49
PLIERS ALICATES
OPEN STOCK PLIERS UNIDADES DE ALICATES
82020D
12" GROOVE JOINT PLIERS WITH STRAIGHT JAW ALICATES AJUSTABLES DE 12" CON MANDBULA EN PARALELO 9.5" TONGUE AND GROOVE PLIERS ALICATES DE APERTURA MLTIPLE DE 9.5"
82011
82013
8" LONG NOSE PLIERS BOCA LARGA 8" ALICATES 6" LONG NOSE PLIERS BOCA LARGA 6" ALICATES
82010D
COMFORT
82012
7" DIAGONAL CUTTING PLERS ALICATES DE CORTE DIAGONAL 7"
Feature a slim handle design and rounded inside edges for comfort
COMODIDAD
Ofrecen un diseo de empuadura fina con curvatura de los ngulos interiores para mayor comodidad
CERTIFICADO
Los alicates y destornilladores estn aislados para 1000 V segn la norma IEC 60900
10 PC. INSULATED PLIERS AND SCREWDRIVERS SET
(3) INSULATED SLOTTED SCREWDRIVERS: 2.5MM X 3", 4.0MM X 4", 5.5MM X 5" (2) INSULATED PHILLIPS SCREWDRIVERS: #1 X 3-1/8" & #2 X 4" (2) POZIDRIV INSULATED SCREWDRIVERS: #1 X 3-1/8" & #2 X 4" LINESMAN INSULATED PLIERS LONG NOSE INSULATED PLIERS DIAGONAL CUTTING INSULATED PLIERS
80062
50
EFECTO DE PALANCA Indexable a 180 para mayor efecto de palanca ADDED TRACTION Grooved profile on 24", 33" and extendable models TRACCIN AADIDA Perfil ranurado en los modelos de 24", 33" y extensibles APPLICATIONS: Demolition of roof rafters and floor joists Removing broken concrete Repositioning equipment Aligning steel components and fabrications Engine repositioning and placement
APLICACIONES: Demolicin de vigas de techo y viguetas de suelo Extraccin de hormign roto Recolocacin de equipamiento Alineacin de componentes y fabricaciones de acero Recolocacin de motores y posicionamiento
51
Length Longitud
8" 10" 16" 24" 33"
Fits securely in your tool box Cabe en la caja de herramientas de modo seguro
PUSH BUTTON
BOTN DE CONTACTO
Extensin de 29" a 48"
82220
18" to 29" extendable Patent pending Extensible de 18" a 29" Pendiente de patente
82248
29" to 48" extendable Patent pending Extensible de 29" a 48" Pendiente de patente
52
FIBERGLASS HANDLE EMPUADURA DE FIBRA DE VIDRIO PRECISION HARDENED Striking faces ENDURECIDO PRECISO Caras de percusin
AVAILABLE IN: Ball Pein Curved Claw Drilling Dead Blow Rubber Mallet Soft or Hard Face DISPONIBLE EN: Martillo de bola Martillo de ua Maceta Martillo antirrebote Maza de goma Martillo de doble cara
82252
24 OZ. BALL PEIN HAMMER
82253
32 OZ. BALL PEIN HAMMER
- FIBERGLASS
- FIBERGLASS
- FIBERGLASS
- FIBRA DE CRISTAL
- FIBRA DE CRISTAL
- FIBRA DE CRISTAL
82255
3 LB. DRILLING HAMMER
82260
12 OZ. SOFT FACE HAMMER
82259
16 OZ. RUBBER MALLET
16 OZ. BALL PEIN HAMMER 3 LB. DRILLING HAMMER 12 OZ. SOFT FACE HAMMER 16 OZ. DEADBLOW HAMMER 16 OZ. RUBBER MALLET
- FIBERGLASS
- REMOVABLE CAPS
- HICKORY
- FIBRA DE CRISTAL
- TAPAS EXTRABLES
- MADERA DE NOGAL
MARTILLO DE BOLA DE 16 ONZAS MACETA DE 3 LIBRAS MARTILLO CARA NYLON DE 12 ONZAS MARTILLO ANTIRREBOTE DE 16 ONZAS MAZA DE GOMA DE 16 ONZAS
53
HARDENED TIPS
PUNTAS ENDURECIDAS
Aleacin de acero con endurecido de precisin
SURFACE GROUND
For easy identification Para identificacin fcil
SUPERFICIE SEALIZADA
82305
12 PC. PUNCH AND CHISEL SET
(4) COLD CHISELS - 1/4 X 4-3/4 X 1/4 - 3/8 X 5 X 5/16 - 1/2 X 6 X 3/8 - 5/8 X 6-1/2 X 3/8 (2) STARTER PUNCHES - 3/16 X 5 X 3/8 - 1/8 X 4-1/2 X 5/16 (1) CENTER PUNCH - 3/8 X 5 (4) PIN PUNCHES - 3/32 X 4-3/4 X 5/16 - 1/8 X 5 X 5/16 - 5/32 X 5-1/4 X 5/16 - 3/16 X 5-1/2 X 5/16 (1) LONG TAPER PUNCH - 1/8 X 8 X 3/8
54
MACHOS Y TERRAJAS TAP AND DIE RATCHETING TAP AND DIE DRIVE TOOLS HERRAMIENTAS DE MACHOS Y TERRAJAS DE CARRACA
Extend the length by combining adapters with a standard 3/8 drive extension Aumente la longitud combinando adaptadores con un tamao de extensin estndar de 3/8 Extension adapters provide access in tight confined areas Los adaptadores de extensin proporcionan acceso a lugares estrechos
Products are covered by one or more of the following patents: US 6,868,759 US 7,231,851 US 7,168,346 Los productos estn cubiertos por una o ms de las siguientes patentes: US 6,868,759 US 7,231,851 US 7,168,346
Works on round and hex shaped dies Funciona con terrajas redondas y hexagonales
5 ratcheting arc with reversible lever eliminates hand over hand turning El arco de carraca de 5 con palanca reversible elimina el giro de tipo mano sobre mano
DIE ADAPTER Works with Pass-Thru Ratchet and Socket System as well as Vortex socket accessories ADAPTADOR DE TERRAJA Funciona tanto con el sistema Pass-Thru de carraca y vasos como con los accesorios de vaso Vortex SPRING LOADED CAP For quick realease of large tap adapter TAPA CON MUELLE Para extraer con rapidez los adaptadores macho largos AUTO LOCKING FEATURE For safe removal of tap adapter ELEMENTO AUTOBLOCANTE Para una extraccin segura del adaptador macho
Patented Twist Lock Guide System reduces back walk of die guard El sistema patentado de gua con pestillo giratorio reduce el retroceso de la proteccin de la terraja
PATENTED PATENTADO
55
PATENTED PATENTED
3886
40 PC. MEDIUM RATCHETING TAP AND DIE SET METRIC
MEDIUM RATCHETING T WRENCH MEDIUM TAP ADAPTER SMALL TAP ADAPTER MEDIUM HEX DIE ADAPTER SLIDING T FOR ADAPTERS METRIC THREAD GAUGE #5 SCREWDRIVER (16) TAPS (16) HEX DIES
PATENTED PATENTED
3880
PATENTED PATENTED
56
Corrosion-resistant alloy steel Maximum reach without exceeding center point of interference Mximo alcance antes de llegar al tope de la articulacin central Jaws open greater distance than the handle for added reach in tight locations Interchangeable straight and 90 degree tips Puntas intercambiables rectas y a 90 grados La boca de la pinza se abre ms que el mango para darle mayor alcance Aleacin de acero resistente a la corrosin
Dual-dipped for comfort and grip Doble capa: firmeza y comodidad de agarre
Applications
Aplicaciones
Long-reach colter pin removal Use as a pick-up tool Tight access under engine cowlings in aviation and automotive Electrical terminal removal and installation Extraccin de chavetas/pasadores con largo alcance Como herramienta de recuperacin de piezas Lugares de difcil alcance en motores de aviacin y vehculos Extraccin y colocacin de terminales elctricos
GearWrench Internal/External Double-X Snap Ring Pliers With their unique compound
joint design and interchangeable tips, new GearWrench Double-X snap ring pliers make you extra productive in the tightest spots. Add Double-X snap ring pliersalso available in needle nose, hose pull-off, hemostat and duck bill pliersto your toolbox.
Pinza para anillos de retn internos y externos Double-X de GearWrench Con su exclusivo
diseo de articulacin y puntas intercambiables, la nueva pinza Double-X de GearWrench para anillos de retn incrementa la productividad en escapcios reducidos. No olvide llevar en su caja de herramientas la pinza para anillos de retn Double-X, tambin en models de punta fina, de extraccin de tubos flexibles, hemosttica y de punta plana.
2009
CUTTING CORTANDO
FOLDING UTILITY KNIFE CUCHILLO PLEGABLE MULTIUSO
3" LOCKING BLADE WITH SERRATED EDGE FOR ROUGH CUTS STANDARD FOLDING UTILITY KNIFE FOR SHARPER, DELICATE CUTS EASY BLADE RELEASE DUAL MATERIAL BODY STORAGE POUCH INCLUDED
82881 82810
CUCHILLA BLOCANTE DE 3" CON ARISTA DENTADA PARA CORTES DUROS CUCHILLO PLEGABLE MULTIUSO ESTNDAR PARA CORTES PRECISOS Y DELICADOS EYECCIN FCIL DE LA CUCHILLA CUERPO DE DOS MATERIALES ESTUCHE DE TRANSPORTE INCLUIDO
84040
4 PC MINI HOOK & PICK SET
3-1/8 MINI FULL HOOK 3-1/8 90 MINI HOOK 3-1/8 STRAIGHT MINI HOOK 3-1/8 MINI OFFSET HOOK
58
HERRAMIENTAS ESPECIAL SPECIALTY TOOLS SERPENTINE BELT TOOL SET JUEGO DE HERRAMIENTA PARA CINTURN DE SERPENTINA
Uses both sockets and crowsfoot attachments for coverage and access Compatible tanto con uniones de vaso como crowsfoot para mayor cobertura y accesibilidad
TOTAL COVERAGE 100% coverage of all serpentine belts in the market TOTAL COVERAGE Cobertura del 100% de todos los cinturones de serpentina del mercado
ACCESS Allows for application in tight areas ACCESO Permite el uso en lugares estrechos
84050D
4 PC. DOOR PAD AND PANEL REMOVAL KIT
4" V-NOTCH PULLER 4" SQUARE NOTCH PULLER 4" SCRAPER CURVED BLADE V-NOTCH PULLER
86990
59
INNOVATIVE FEATURES
CUALIDADES INNOVADORAS
60
SAE/MET SAE/METRCO
5 Pc. Punch and Chisel Set 3/8 x 5 Center Punch 1/8 x 5 x 5/16 Pin Punch 5/32 x 5-1/4 x 5/16 Pin Punch 3/16 x 5-1/2 x 5/16 Pin Punch 1/2 x 6 x 3/8 Cold Chisel Juego de 5 pz. Botadores y cinceles Granete 3/8 x 5 Botador cilndrico 1/8 x 5 x 5/16 Botador cilndrico 5/32 x 5-1/4 x 5/16 Botador cilndrico 3/16 x 5-1/2 x 5/16 Cortafros 1/2 x 6 x 3/8 16 oz. Ball Pein HammerFiberglass 12 oz. Softface Hammer Removable Caps Folding Utility Knife Aluminum Flashlight 10 Curved Jaw Locking Pliers Safety Glasses Martillo de bola de 16 onzas: Fibra de cristal Martillo cara nylon de 12 onzas Tapas extrables Cuchillo plegable multiuso Linterna de aluminio Pinza de apriete con mandbula curvada 10 Gafas de seguridad
81900 24 Pc. SAE/Metric Long Pattern Combination Non-Ratcheting Wrench Set 81900 Juego de 24 pz. Llaves combinadas sin carraca de muesca larga SAE/mtrico 81656 1/2 81668 11mm 81657 9/16 81669 12mm 81658 5/8 81670 13mm 81659 11/16 81671 14mm 81660 3/4 81672 15mm 81661 13/16 81673 16mm 81662 7/8 81674 17mm 81663 15/16 81675 18mm 81664 1 81676 19mm 81665 8mm 81677 20mm 81666 9mm 81678 21mm 81667 10mm 81679 22mm
Botadores y cinceles
82304 82270 82273 82274 82275 82264 82251 82260 82881 83132 82041 69-990 82251 82260 82881 83132 82041 69-990
13 Pc. 6 Pt. Metric Socket Set Juego de 13 pz. vaso 6 Pt. mtrico 4mm 80132 10mm 5mm 80133 11mm 5.5mm 80134 12mm 6mm 80135 13mm 7mm 80136 14mm 8mm 80137 15mm 9mm 10 Pc. 6 Pt. SAE Socket Set Juego de 10 pz. vaso 6 Pt. SAE 3/16 80110 11/32 7/32 80111 3/8 1/4 80112 7/16 9/32 80113 1/2 5/16 80114 9/16 Full Polish Ratchet 3 Extension 6 Extension Spinner Handle Carraca de pulido totalt Extensin de 3 Extensin de 6 Mango portapuntas
14 Pc. 6 Pt. Metric Socket Set Juego de 14 pz. vaso 6 Pt. mtrico 6mm 80381 13mm 7mm 80382 14mm 8mm 80383 15mm 9mm 80384 16mm 10mm 80385 17mm 11mm 80386 18mm 12mm 80387 19mm 13 Pc. 6 Pt. SAE Socket Set Juego de 13 pz. vaso 6 Pt. SAE 1/4 80357 11/16 5/16 80358 3/4 3/8 80359 13/16 7/16 80360 7/8 1/2 80361 15/16 9/16 80362 1 5/8 Full Polish Teardrop Ratchet 3 Extension 6 Extension Universal Joint 5/8 Spark Plug Socket 13/16 Spark Plug Socket
6 Pc. Combination Screwdriver Set 1/8 x 3 Slotted w/Cabinet Tip 1/4 x 4 Slotted w/Hex Bolster 5/16 x 6 Slotted w/Hex Bolster 3/8 x 8 Slotted w/Hex Bolster #1 x 3 Phillips #2 x 4 Phillips w/Hex Bolster 3 Pc. Mixed Pliers Set 9.5 Tongue and Groove 7 Diagonal Cutting 8 Long Nose Juego de 6 pz. Destornilladores combinados Plano con punta de precisin 1/8 x 3 Plano con refuerzo hexagonal 1/4 x 4 Plano con refuerzo hexagonal 5/16 x 6 Plano con refuerzo hexagonal 3/8 x 8 Phillips #1 x 3 Phillips con refuerzo hexagonal #2 x 4 Juego de 3 pz. Alicates mixtos Alicate de apertura mltiple 9,5 Alicate de corte diagonal 7 Alicate de boca larga 8
KD Specialty Tools
KDS129 Low Voltage Circuit Tester KDS162 16 Blade Feeler Gauge KDS485 Gasket Scraper
Herramientas especiales KD
KDS129 Medidor de circuitos de bajo voltaje KDS162 Galga para roscas de 16 hojas KDS485 Rascador de juntas
Destornilladores y alicates
80050 80015 80013 80023 80022 80001 80007 82104 82011 82012 82013
Tool Storage
Almacenamiento de herramientas
83130 Caja de transporte
Not all tools GearWrench Branded No todas las herramientas son de la marca GearWrench
56603G 13 Pc. SAE ALLEN Hex Key Set Sizes: 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8
Hex Keys
83090MET AUTO INTRODUCTORY SET METRIC ONLY JUEGO DE INTRODUCCIN A LA AUTOMOCIN SOLO MTRICO
Llaves hexagonales
56603G Juego de 13 pz. Llave hexagonal SAE ALLEN Tamaos: 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8
61
62
SAE/MET SAE/METRCO
80303 10 Pc. 6 Pt. SAE Socket Set 80303 Juego de 10 pz. vaso 6 Pt. SAE 80105 80106 80107 80108 80109 3/16 7/32 1/4 9/32 5/16 80110 80111 80112 80113 80114 11/32 3/8 7/16 1/2 9/16
80703 11 Pc. 6 Pt. SAE Socket Set 80703 Juego de 11 pz. Vasos 6 Pt. SAE 80603 80604 80605 80606 80607 80608 81206 81113 81116 80100 81128 81241 81242 80549 80402 80403 80600 81341 81342 81206 81113 81116 80100 81128 81241 81242 80549 80402 80403 80600 81341 81342 1/2 9/16 5/8 11/16 3/4 13/16 80609 80610 80611 80612 80613 7/8 15/16 1 1-1/16 1-1/8
80304 13 Pc. 6 Pt. Deep Metric Socket Set 80304 Juegos de 13 pz. Vasos largos 6 Pt. mtrico 80138 80139 80140 80141 80142 80143 80144 4mm 5mm 5.5mm 6mm 7mm 8mm 9mm 80145 80146 80147 80148 80149 80150 10mm 11mm 12mm 13mm 14mm 15mm
Drive Tools
3 Pc. Full Polish Ratchet Set 3 Extension 1/4 Drive 6 Extension 1/4 Drive Universal Joint 1/4 Drive Spinner Handle 1/4 Drive 3 Extension 3/8 Drive 6 Extension 3/8 Drive Universal Joint 3/8 Drive 5/8 Spark Plug Socket 3/8 Drive 13/16 Spark Plug Socket 3/8 Drive Universal Joint 1/2 Drive 5 Extension 1/2 Drive 10 Extension 1/2 Drive Juego de 3 pz. Carracas de pulido total Extensin de 3 tamao 1/4 Extensin de 6 tamao 1/4 Articulacin universal tamao 1/4 Mango portapuntas tamao 1/4 Extensin de 3 tamao 3/8 Extensin de 6 tamao 3/8 Articulacin universal tamao 3/8 Vaso conector de buja de 5/8 tamao 3/8 Vaso conector de buja de 13/16 tamao 3/8 Articulacin universal tamao 1/2 Extensin de 5 tamao 1/2 Extensin de 10 tamao 1/2
Destornilladores y alicates
80305 10 Pc. 6 Pt. Deep SAE Socket Set 80305 Juego de 10 pz. Vasos largos 6 Pt. SAE 80115 80116 80117 80118 80119 3/16 7/32 1/4 9/32 5/16 80120 80121 80122 80123 80124 11/32 3/8 7/16 1/2 9/16
Herramientas de apriete
13 Pc. 6 Pt. SAE Socket Set Juego de 13 pz. vaso 6 Pt. SAE 1/4 5/16 3/8 7/16 1/2 9/16 5/8 80357 80358 80359 80360 80361 80362 11/16 3/4 13/16 7/8 15/16 1
KD Specialty Tools
14 Pc. 6 Pt. Deep Metric Socket Set Juego de 14 pz. Vasos largos 6 Pt. mtrico 6mm 7mm 8mm 9mm 10mm 11mm 12mm 80395 80396 80397 80398 80399 80400 80401 13mm 14mm 15mm 16mm 17mm 18mm 19mm
Herramientas especiales KD
11 Pc. 6 Pt. Deep SAE Socket Set Juego de 11 pz. Vasos largos 6 Pt. SAE 1/4 5/16 3/8 7/16 1/2 9/16 80369 80370 80371 80372 80373 5/8 11/16 3/4 13/16 7/8
15 Pc. Metric Long Pattern Non-Ratcheting Wrench Set Juego de 15 pz. Llaves sin carraca de muesca larga mtrico 8mm 81673 16mm 9mm 81674 17mm 10mm 81675 18mm 11mm 81676 19mm 12mm 81677 20mm 13mm 81678 21mm 14mm 81679 22mm 15mm
Not all tools GearWrench Branded No todas las herramientas son de la marca GearWrench
83091MET CAREER BUILDER STARTER SET METRIC ONLY JUEGO DE INICIACIN A LA PROFESIN SOLO MTRICO
63
80303 10 Pc. 6 Pt. SAE Socket Set 80303 Juego de 10 pz. vaso 6 Pt. SAE 80105 80106 80107 80108 80109 3/16 7/32 1/4 9/32 5/16 80110 80111 80112 80113 80114 11/32 3/8 7/16 1/2 9/16
80304 13 Pc. 6 Pt. Deep Metric Socket Set 80304 Juegos de 13 pz. Vasos largos 6 Pt. mtrico 80138 80139 80140 80141 80142 80143 80144 4mm 5mm 5.5mm 6mm 7mm 8mm 9mm 80145 80146 80147 80148 80149 80150 10mm 11mm 12mm 13mm 14mm 15mm
80305 10 Pc. 6 Pt. Deep SAE Socket Set 80305 Juego de 10 pz. Vasos largos 6 Pt. SAE 80115 80116 80117 80118 80119 3/16 7/32 1/4 9/32 5/16 80120 80121 80122 80123 80124 11/32 3/8 7/16 1/2 9/16
13 Pc. 6 Pt. SAE Socket Set Juego de 13 pz. vaso 6 Pt. SAE 1/4 5/16 3/8 7/16 1/2 9/16 5/8 80357 80358 80359 80360 80361 80362 11/16 3/4 13/16 7/8 15/16 1
14 Pc. 6 Pt. Deep Metric Socket Set Juego de 14 pz. Vasos largos 6 Pt. mtrico 6mm 7mm 8mm 9mm 10mm 11mm 12mm 80395 80396 80397 80398 80399 80400 80401 13mm 14mm 15mm 16mm 17mm 18mm 19mm
11 Pc. 6 Pt. Deep SAE Socket Set Juego de 11 pz. Vasos largos 6 Pt. SAE 1/4 5/16 3/8 7/16 1/2 9/16 80369 80370 80371 80372 80373 5/8 11/16 3/4 13/16 7/8
64
Botadores y cinceles
82305 82261 82262 82264 82265 82270 82272 82273 82274 82275 82278 82283 82285 Juego de 12 pz. Botadores y cinceles Cortafros1/4 x 4-3/4 x 1/4 Cortafros 3/8 x 5 x 5/16 Cold Chisel Cortafros 1/2 x 6 x 3/8 Cold Chisel Cortafros 5/8 x 6-1/2 x 3/8 Granete 3/8 x 5 Botador cilndrico 3/32 x 4-3/4 x 5/16 Botador cilndrico 1/8 x 5 x 5/16 Botador cilndrico 5/32 x 5-1/4 x 5/16 Botador cilndrico 3/16 x 5-1/2 x 5/16 Botador cnico largo 1/8 x 8 x 3/8 Botador 3/16 x 5 x 3/8 Botador 1/8 x 4-1/2 x 5/16
SAE/MET SAE/METRCO
990 990 69-990 KDS129 KDS162 KDS485 KDS2282 KDS2283 KDS2774 KDS298 KDS295 KDS3163 KDS2840 KDS2593 KDS3151 KDS2162 KDS129 KDS162 KDS485 KDS2282 KDS2283 KDS2774 KDS298 KDS295 KDS3163 KDS2840 KDS2593 Tenaza grip de mandbula curvada 5 Tenaza grip de mandbula curvada 10 Gafas de seguridad Low Voltage Circuit Tester 16 Blade Feeler Gauge Gasket Scraper Slotted Screw Starter Phillips Screw Starter Brake Retaining Spring Tool Brake Spring Pliers Brake Shoe Adjusting Tool Rear Brake Piston Tool Telescoping Mirror Telescoping Magnetic Pick-Up Tool Interchangeable Snap Ring Pliers Wire Stripper Crimper
KD Specialty Tools
80703 11 Pc. 6 Pt. SAE Socket Set 80703 Juego de 11 pz. Vasos 6 Pt. SAE 80603 80604 80605 80606 80607 80608 81206 81113 80100 81128 81241 81242 80549 80402 80403 80600 81341 81307 81206 81113 80100 81128 81241 81242 80549 80402 80403 80600 81341 81307 1/2 9/16 5/8 11/16 3/4 13/16 80609 80610 80611 80612 80613 7/8 15/16 1 1-1/16 1-1/8
80723 13 Pc. Torx Press Fit Bit Socket Set 1/4, 3/8, 1/2 Drive T-8, 1/4 Drive T-10 , 1/4 Drive T-15, 1/4 Drive T-20, 1/4 Drive T-25, 1/4 Drive T-27, 1/4 Drive T-30, 1/4 Drive T-40, 3/8 Drive T-45 , 3/8 Drive T-47, 3/8 Drive T-50, 3/8 Drive T-55 , 3/8 Drive T-60, 1/2 Drive Juego de 13 pz. Vasos de punta de encaje a presin Torx Tamaos: 1/4, 3/8, 1/2 T-8, tamao 1/4 T-10 , tamao 1/4 T-15, tamao 1/4 T-20, tamao 1/4 T-25, tamao 1/4 T-27, tamao 1/4 T-30, tamao 1/4 T-40, tamao 3/8 T-45 , tamao 3/8 T-47, tamao 3/8 T-50, tamao 3/8 T-55, tamao 3/8 T-60, tamao 1/2 High Tension Hacksaw 16 oz Ball Pein HammerFiberglass 12 oz Softface Hammer Removable Caps 3 lb Drilling Hammer 16 oz Rubber MalletWood Hickory Folding Utility Knife Intermediate Aviation Set Intermediate Aviation Set 3 Pc. Locking Pliers Set Long Nose Locking Pliers 6 Curved Jaw Locking Pliers 5 Curved Jaw Locking Pliers 10 Safety Glasses Sierra para metales de alta tensin Martillo de bola de 16 onzas Fibra de cristal Martillo cara nylon de 12 onzas Caras extrables Maceta de 3 libras Maza de goma de 16 onzas Empuadura de madera de nogal Cuchillo plegable multiuso Juego intermedio de aviacin Juego intermedio de aviacin Juego de 3 pz. Pinzas de apriete Tenaza grip con punta larga 6
Drive Tools
3 Pc. Full Polish Ratchet Set 3 Extension 1/4 Drive Universal Joint 1/4 Drive Spinner Handle 1/4 Drive 3 Extension 3/8 Drive 6 Extension 3/8 Drive Universal Joint 3/8 Drive 5/8 Spark Plug Socket 3/8 Drive 13/16 Spark Plug Socket 3/8 Drive Universal Joint 1/2 Drive 5 Extension 1/2 Drive Full Polish Flex Handle 1/2 Drive Juego de 3 pz. Carracas de pulido total Extensin de 3 tamao 1/4 Articulacin universal tamao 1/4 Mango portapuntas tamao 1/4 Extensin de 3 tamao 3/8 Extensin de 6 tamao 3/8 Articulacin universal tamao 3/8 Vaso conector de buja de 5/8 tamao 3/8 Vaso conector de buja de 13/16 tamao 3/8 Articulacin universal tamao 1/2 Extensin de 5 tamao 1/2 Empuadura flexible de pulido total
Herramientas especiales KD
Medidor de circuitos de bajo voltaje Galga para roscas de 16 hojas Sujetatornillos de cabeza plana Sujetatornillos de cabeza plana Sujetatornillos de cabeza Phillips Herramienta para muelles de freno Alicates para muelles de freno Herramienta de ajuste de zapatas de freno Herramienta para pistn de freno trasero Espejo plegable Herramienta plegable de recuperacin magntica KDS3151 Alicates intercambiables para arandelas KDS2162 Pinza pelacables
Not all tools GearWrench Branded No todas las herramientas son de la marca GearWrench
Destornilladores y alicates
Herramientas de apriete
83095MET INTERMEDIATE AUTO TEP SET METRIC ONLY JUEGO TEP INTERMEDIO DE AUTOMOCIN - SOLO
81902 15 Pc. Metric Long Pattern Non-Ratcheting Wrench Set 81902 Juego de 15 pz. Llaves sin carraca de muesca larga mtrico 81665 81666 81667 81668 81669 81670 81671 81672 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 81673 81674 81675 81676 81677 81678 81679 16mm 17mm 18mm 19mm 20mm 21mm 22mm
65
11 Pc. 6 Pt. Deep SAE Socket Set uego de 11 pz. Vasos largos 6 Pt. SAE 1/4 5/16 3/8 7/16 1/2 9/16 80369 80370 80371 80372 80373 5/8 11/16 3/4 13/16 7/8
80703 11 Pc. 6 Pt. SAE Socket Set 80703 Juego de 11 pz. Vasos 6 Pt. SAE 80603 80604 80605 80606 80607 80608 81206 81113 80100 81128 81241 81242 80549 80402 80403 80600 81341 81307 81206 81113 80100 81128 81241 81242 80549 80402 80403 80600 81341 81307 1/2 9/16 5/8 11/16 3/4 13/16 80609 80610 80611 80612 80613 7/8 15/16 1 1-1/16 1-1/8
Drive Tools
3 Pc. Full Polish Ratchet Set 3 Extension 1/4 Drive Universal Joint 1/4 Drive Spinner Handle 1/4 Drive 3 Extension 3/8 Drive 6 Extension 3/8 Drive Universal Joint 3/8 Drive 5/8 Spark Plug Socket 3/8 Drive 13/16 Spark Plug Socket 3/8 Drive Universal Joint 1/2 Drive 5 Extension 1/2 Drive Full Polish Flex Handle 1/2 Drive Juego de 3 pz. Carracas de pulido total Extensin de 3 tamao 1/4 Articulacin universal tamao 1/4 Mango portapuntas tamao 1/4 Extensin de 3 tamao 3/8 Extensin de 6 tamao 3/8 Articulacin universal tamao 3/8 Vaso conector de buja de 5/8 tamao 3/8 Vaso conector de buja de 13/16 tamao 3/8 Articulacin universal tamao 1/2 Extensin de 5 tamao 1/2 Empuadura flexible de pulido total tamao 1/2
Herramientas de apriete
80376 80377 80378 80379 80380 80553 80553 80350 80351 80352 80353 80354 80355 80356 80554 80554 mtrico 80388 80389 80390 80391
80305 10 Pc. 6 Pt. Deep SAE Socket Set 80305 Juego de 10 pz. Vasos largos 6 Pt. SAE 80115 80116 80117 80118 80119 3/16 7/32 1/4 9/32 5/16 80120 80121 80122 80123 80124 11/32 3/8 7/16 1/2 9/16
13 Pc. 6 Pt. SAE Socket Set Juego de 13 pz. vaso 6 Pt. SAE 1/4 5/16 3/8 7/16 1/2 9/16 5/8 80357 80358 80359 80360 80361 80362 11/16 3/4 13/16 7/8 15/16 1
80303 10 Pc. 6 Pt. SAE Socket Set 80303 Juego de 10 pz. vaso 6 Pt. SAE 80105 80106 80107 80108 80109 3/16 7/32 1/4 9/32 5/16 80110 80111 80112 80113 80114 11/32 3/8 7/16 1/2 9/16
14 Pc. 6 Pt. Deep Metric Socket Set Juego de 14 pz. Vasos largos 6 Pt. 6mm 7mm 8mm 9mm 80395 80396 80397 80398 13mm 14mm 15mm 16mm
80304 13 Pc. 6 Pt. Deep Metric Socket Set 80304 Juegos de 13 pz. Vasos largos 6 Pt. mtrico
66
SAE/MET SAE/METRCO
82259 82881 83131 83132 82041 82043 82050 69-990 82880 82840 82251 82260 82255 82259 82881 83131 83132 82041 82043 82050 69-990 16 oz Rubber Mallet Folding Utility Knife Intermediate Aviation Set Intermediate Aviation Set 10 Curved Jaw Locking Pliers 6 Long Nose Locking Pliers 11 Swivel Pad C-Clamp Locking Pliers Safety Glasses Sierra para metales de alta tensin Alicates de corte recto para aviacin Martillo de bola de 16 onzas Fibra de cristal Martillo cara nylon de 12 onzas Caras extrables Maceta de 3 libras Maza de goma de 16 onzas Cuchillo plegable multiuso Juego intermedio de aviacin Juego intermedio de aviacin Pinza de apriete con mandbula curvada 10 Pinza de apriete de boca larga 6 Tenaza grip con cuello de cisne 11 Gafas de seguridad Low Voltage Circuit Tester Gasket Scraper Telescoping Mirros Telescoping Magnetic Pick-Up Tool Interchangeable Snap Ring Pliers Wire Stripper Crimper Window Molding Remover Door Handle Window Lift Remover Trim Pad Removal Tool Push Pin Pliers Scribe All Purpose Sticker Scraper Tool Shoe Handle Wire Scratch Brush 3 Putty/Knife Scraper 1-1/4 Putty/Knife Scraper Medidor de circuitos de bajo voltaje Rascador de juntas Espejos plegables Herramienta plegable de recuperacin magntica Alicates intercambiables para arandelas Pinza pelacables Extractor de molduras de ventanas Extractor de manivelas para ventanas Herramienta de extraccin para tapicera Alicates de buja Trazador Rascador general de pegatinas Cepillo de alambre Esptula 3 Esptula 1-1/4
Botadores y cinceles
KD Specialty Tools
KDS129 KDS485 KDS2840 KDS2593 KDS3151 KDS2162 KDS2038 KDS431 KDS2822 KDS3729 KDS2979 KDS2106 KDS2311 KDS2426 KDS2425 KDS129 KDS485 KDS2840 KDS2593 KDS3151 KDS2162 KDS2038 KDS431 KDS2822 KDS3729 KDS2979 KDS2106 KDS2311 KDS2426 KDS2425
Destornilladores y alicates
Herramientas especiales KD
Not all tools GearWrench Branded No todas las herramientas son de la marca GearWrench
83097MET INTERMEDIATE AUTO BODY TEP SET METRIC ONLY JUEGO TEP INTERMEDIO DE CARROCERA SOLO MTRICO
67
13 locking positions provide greater access to hard-to-reach spots 13 posiciones fijas para mayor acceso a lugares difciles de alcanzar Surface Drive Plus provides a stronger grip on fasteners, allowing you to apply up to 25% more torque with less rounding Surface Drive Plus tiene un agarre fuerte, con el que puede aplicarse el 25% ms de torque con menos redondeo Lock the pivot joint in the straight position for the strength of a straight wrench Trabar la articulacin en posicin recta para tener la fuerza de una llave recta Unlock the pivot joint and pump the wrench with a piston motion for fast on/off Destrabar la articulacin y bombear como un pistn para movimienta rpido
Get yourself into a tight spot with GearWrench Indexing Ratcheting Wrenches
13 locking positions across 180of movement to you get into hard-to-reach spots to turn even stubborn fasteners with greater ease. Youll get the job done more quickly and find new ways to ratchet up your shops productivity. Find out more about the full line of GearWrench tools at www.gearwrench.com
Get more access and leverage with the complete offering of the indexing pry bar family of product ranging from 8 to 48 inches! Logre ms accesibilidad y efecto de palanca con la familia completa de palancas indexablesCon un rango de 8 a 48 pulgadas!
NSI S 5X A S!!! D EXCEE REMENT REQUI ECES ERA 5 V ITOS SUP EQUIS LOS R ANSI!!!
Withstands over 19,000 inch lbs of force!!! Soporta ms de 19.000 pulgadaslibra de fuerza !!!
The new GearWrench 48" Extendable Pry Bar gives you all the leverage you need and the security, too.
La nueva palanca extensible de 48" GearWrench le proporciona todo el efecto de palanca que necesita y la seguridad tambin.
THE NETHERLANDS Apex Tool Group B.V. Phileas Foggstraat 16 7821 AK Emmen Drenthe Tel.: (0591) 667500 Fax: (0591) 667595 FRANCE Apex Tool Group S.A.S. 25 Rue Maurice Chevallier BP 46 77832 Ozoir-la-Ferrire Cedex Tel.: (01) 60.18.55.40 Fax: (01) 64.40.33.05
GREAT BRITAIN Apex Tool Group 4th Floor Pennine House Washington, Tyne & Wear NE37 1LY Tel.: (0191) 419 7700 Fax: (0191) 417 9421 ITALY Apex Tool Group S.r.l. Viale Europa 80 20090 Cusago (MI) Tel.: (02) 9033 101 Fax: (02) 90394 231
www.apextoolgroup.eu Copyright 2011, Apex Tool Group, LLC. GERMANY Weller Tools GmbH Carl-Benz-Str. 2 74354 Besigheim Tel.: (07143) 580-0 Fax: (07143) 580-108